libata: convert to iomap

Convert libata core layer and LLDs to use iomap.

* managed iomap is used.  Pointer to pcim_iomap_table() is cached at
  host->iomap and used through out LLDs.  This basically replaces
  host->mmio_base.

* if possible, pcim_iomap_regions() is used

Most iomap operation conversions are taken from Jeff Garzik
<jgarzik@pobox.com>'s iomap branch.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 40 insertions, 40 deletions

diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c
index af77f71..7596e9a 100644
--- a/drivers/ata/sata_vsc.c
+++ b/drivers/ata/sata_vsc.c
@@ -50,6 +50,8 @@
 #define DRV_VERSION	"2.0"
 
 enum {
+	VSC_MMIO_BAR			= 0,
+
 	/* Interrupt register offsets (from chip base address) */
 	VSC_SATA_INT_STAT_OFFSET	= 0x00,
 	VSC_SATA_INT_MASK_OFFSET	= 0x04,
@@ -104,7 +106,7 @@ static u32 vsc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg)
 {
 	if (sc_reg > SCR_CONTROL)
 		return 0xffffffffU;
-	return readl((void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4));
+	return readl(ap->ioaddr.scr_addr + (sc_reg * 4));
 }
 
 
@@ -113,7 +115,7 @@ static void vsc_sata_scr_write (struct ata_port *ap, unsigned int sc_reg,
 {
 	if (sc_reg > SCR_CONTROL)
 		return;
-	writel(val, (void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4));
+	writel(val, ap->ioaddr.scr_addr + (sc_reg * 4));
 }
 
 
@@ -122,7 +124,7 @@ static void vsc_intr_mask_update(struct ata_port *ap, u8 ctl)
 	void __iomem *mask_addr;
 	u8 mask;
 
-	mask_addr = ap->host->mmio_base +
+	mask_addr = ap->host->iomap[VSC_MMIO_BAR] +
 		VSC_SATA_INT_MASK_OFFSET + ap->port_no;
 	mask = readb(mask_addr);
 	if (ctl & ATA_NIEN)
@@ -149,25 +151,25 @@ static void vsc_sata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
 	}
 	if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
 		writew(tf->feature | (((u16)tf->hob_feature) << 8),
-		       (void __iomem *) ioaddr->feature_addr);
+		       ioaddr->feature_addr);
 		writew(tf->nsect | (((u16)tf->hob_nsect) << 8),
-		       (void __iomem *) ioaddr->nsect_addr);
+		       ioaddr->nsect_addr);
 		writew(tf->lbal | (((u16)tf->hob_lbal) << 8),
-		       (void __iomem *) ioaddr->lbal_addr);
+		       ioaddr->lbal_addr);
 		writew(tf->lbam | (((u16)tf->hob_lbam) << 8),
-		       (void __iomem *) ioaddr->lbam_addr);
+		       ioaddr->lbam_addr);
 		writew(tf->lbah | (((u16)tf->hob_lbah) << 8),
-		       (void __iomem *) ioaddr->lbah_addr);
+		       ioaddr->lbah_addr);
 	} else if (is_addr) {
-		writew(tf->feature, (void __iomem *) ioaddr->feature_addr);
-		writew(tf->nsect, (void __iomem *) ioaddr->nsect_addr);
-		writew(tf->lbal, (void __iomem *) ioaddr->lbal_addr);
-		writew(tf->lbam, (void __iomem *) ioaddr->lbam_addr);
-		writew(tf->lbah, (void __iomem *) ioaddr->lbah_addr);
+		writew(tf->feature, ioaddr->feature_addr);
+		writew(tf->nsect, ioaddr->nsect_addr);
+		writew(tf->lbal, ioaddr->lbal_addr);
+		writew(tf->lbam, ioaddr->lbam_addr);
+		writew(tf->lbah, ioaddr->lbah_addr);
 	}
 
 	if (tf->flags & ATA_TFLAG_DEVICE)
-		writeb(tf->device, (void __iomem *) ioaddr->device_addr);
+		writeb(tf->device, ioaddr->device_addr);
 
 	ata_wait_idle(ap);
 }
@@ -179,12 +181,12 @@ static void vsc_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
 	u16 nsect, lbal, lbam, lbah, feature;
 
 	tf->command = ata_check_status(ap);
-	tf->device = readw((void __iomem *) ioaddr->device_addr);
-	feature = readw((void __iomem *) ioaddr->error_addr);
-	nsect = readw((void __iomem *) ioaddr->nsect_addr);
-	lbal = readw((void __iomem *) ioaddr->lbal_addr);
-	lbam = readw((void __iomem *) ioaddr->lbam_addr);
-	lbah = readw((void __iomem *) ioaddr->lbah_addr);
+	tf->device = readw(ioaddr->device_addr);
+	feature = readw(ioaddr->error_addr);
+	nsect = readw(ioaddr->nsect_addr);
+	lbal = readw(ioaddr->lbal_addr);
+	lbam = readw(ioaddr->lbam_addr);
+	lbah = readw(ioaddr->lbah_addr);
 
 	tf->feature = feature;
 	tf->nsect = nsect;
@@ -216,7 +218,8 @@ static irqreturn_t vsc_sata_interrupt (int irq, void *dev_instance)
 
 	spin_lock(&host->lock);
 
-	int_status = readl(host->mmio_base + VSC_SATA_INT_STAT_OFFSET);
+	int_status = readl(host->iomap[VSC_MMIO_BAR] +
+			   VSC_SATA_INT_STAT_OFFSET);
 
 	for (i = 0; i < host->n_ports; i++) {
 		if (int_status & ((u32) 0xFF << (8 * i))) {
@@ -300,7 +303,7 @@ static const struct ata_port_operations vsc_sata_ops = {
 	.bmdma_status		= ata_bmdma_status,
 	.qc_prep		= ata_qc_prep,
 	.qc_issue		= ata_qc_issue_prot,
-	.data_xfer		= ata_mmio_data_xfer,
+	.data_xfer		= ata_data_xfer,
 	.freeze			= ata_bmdma_freeze,
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= ata_bmdma_error_handler,
@@ -312,7 +315,8 @@ static const struct ata_port_operations vsc_sata_ops = {
 	.port_start		= ata_port_start,
 };
 
-static void __devinit vsc_sata_setup_port(struct ata_ioports *port, unsigned long base)
+static void __devinit vsc_sata_setup_port(struct ata_ioports *port,
+					  void __iomem *base)
 {
 	port->cmd_addr		= base + VSC_SATA_TF_CMD_OFFSET;
 	port->data_addr		= base + VSC_SATA_TF_DATA_OFFSET;
@@ -329,16 +333,15 @@ static void __devinit vsc_sata_setup_port(struct ata_ioports *port, unsigned lon
 	port->ctl_addr		= base + VSC_SATA_TF_CTL_OFFSET;
 	port->bmdma_addr	= base + VSC_SATA_DMA_CMD_OFFSET;
 	port->scr_addr		= base + VSC_SATA_SCR_STATUS_OFFSET;
-	writel(0, (void __iomem *) base + VSC_SATA_UP_DESCRIPTOR_OFFSET);
-	writel(0, (void __iomem *) base + VSC_SATA_UP_DATA_BUFFER_OFFSET);
+	writel(0, base + VSC_SATA_UP_DESCRIPTOR_OFFSET);
+	writel(0, base + VSC_SATA_UP_DATA_BUFFER_OFFSET);
 }
 
 
 static int __devinit vsc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	static int printed_version;
-	struct ata_probe_ent *probe_ent = NULL;
-	unsigned long base;
+	struct ata_probe_ent *probe_ent;
 	void __iomem *mmio_base;
 	int rc;
 
@@ -355,11 +358,11 @@ static int __devinit vsc_sata_init_one (struct pci_dev *pdev, const struct pci_d
 	if (pci_resource_len(pdev, 0) == 0)
 		return -ENODEV;
 
-	rc = pci_request_regions(pdev, DRV_NAME);
-	if (rc) {
+	rc = pcim_iomap_regions(pdev, 1 << VSC_MMIO_BAR, DRV_NAME);
+	if (rc == -EBUSY)
 		pcim_pin_device(pdev);
+	if (rc)
 		return rc;
-	}
 
 	/*
 	 * Use 32 bit DMA mask, because 64 bit address support is poor.
@@ -377,11 +380,6 @@ static int __devinit vsc_sata_init_one (struct pci_dev *pdev, const struct pci_d
 	probe_ent->dev = pci_dev_to_dev(pdev);
 	INIT_LIST_HEAD(&probe_ent->node);
 
-	mmio_base = pcim_iomap(pdev, 0, 0);
-	if (mmio_base == NULL)
-		return -ENOMEM;
-	base = (unsigned long) mmio_base;
-
 	/*
 	 * Due to a bug in the chip, the default cache line size can't be used
 	 */
@@ -398,7 +396,7 @@ static int __devinit vsc_sata_init_one (struct pci_dev *pdev, const struct pci_d
 	probe_ent->port_ops = &vsc_sata_ops;
 	probe_ent->n_ports = 4;
 	probe_ent->irq = pdev->irq;
-	probe_ent->mmio_base = mmio_base;
+	probe_ent->iomap = pcim_iomap_table(pdev);
 
 	/* We don't care much about the PIO/UDMA masks, but the core won't like us
 	 * if we don't fill these
@@ -407,11 +405,13 @@ static int __devinit vsc_sata_init_one (struct pci_dev *pdev, const struct pci_d
 	probe_ent->mwdma_mask = 0x07;
 	probe_ent->udma_mask = 0x7f;
 
+	mmio_base = probe_ent->iomap[VSC_MMIO_BAR];
+
 	/* We have 4 ports per PCI function */
-	vsc_sata_setup_port(&probe_ent->port[0], base + 1 * VSC_SATA_PORT_OFFSET);
-	vsc_sata_setup_port(&probe_ent->port[1], base + 2 * VSC_SATA_PORT_OFFSET);
-	vsc_sata_setup_port(&probe_ent->port[2], base + 3 * VSC_SATA_PORT_OFFSET);
-	vsc_sata_setup_port(&probe_ent->port[3], base + 4 * VSC_SATA_PORT_OFFSET);
+	vsc_sata_setup_port(&probe_ent->port[0], mmio_base + 1 * VSC_SATA_PORT_OFFSET);
+	vsc_sata_setup_port(&probe_ent->port[1], mmio_base + 2 * VSC_SATA_PORT_OFFSET);
+	vsc_sata_setup_port(&probe_ent->port[2], mmio_base + 3 * VSC_SATA_PORT_OFFSET);
+	vsc_sata_setup_port(&probe_ent->port[3], mmio_base + 4 * VSC_SATA_PORT_OFFSET);
 
 	pci_set_master(pdev);