summaryrefslogtreecommitdiffstats
path: root/drivers/ata/pata_hpt3x3.c
diff options
context:
space:
mode:
authorAlan Cox <alan@redhat.com>2009-01-05 14:12:51 +0000
committerJeff Garzik <jgarzik@redhat.com>2009-01-08 16:08:56 -0500
commit978ff6db23279422046c1b3f89fe2045c234dc91 (patch)
tree69da222db791998823afcc68160dab4d7458ea92 /drivers/ata/pata_hpt3x3.c
parent85da1fb545e5fe51c35e0576f71780cc557f4277 (diff)
downloadop-kernel-dev-978ff6db23279422046c1b3f89fe2045c234dc91.zip
op-kernel-dev-978ff6db23279422046c1b3f89fe2045c234dc91.tar.gz
pata_hpt3x3: Workarounds for chipset
Correct the DMA bit flags (UDMA and MWDMA were swapped) Add workarounds so that we clear ERR and INTR bits before issuing a DMA Add workarounds so that we stop a live DMA before touching the CTL register Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Diffstat (limited to 'drivers/ata/pata_hpt3x3.c')
-rw-r--r--drivers/ata/pata_hpt3x3.c51
1 files changed, 45 insertions, 6 deletions
diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c
index f11a320..1c9016e 100644
--- a/drivers/ata/pata_hpt3x3.c
+++ b/drivers/ata/pata_hpt3x3.c
@@ -23,7 +23,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_hpt3x3"
-#define DRV_VERSION "0.5.3"
+#define DRV_VERSION "0.6.1"
/**
* hpt3x3_set_piomode - PIO setup
@@ -80,14 +80,48 @@ static void hpt3x3_set_dmamode(struct ata_port *ap, struct ata_device *adev)
r2 &= ~(0x11 << dn); /* Clear MWDMA and UDMA bits */
if (adev->dma_mode >= XFER_UDMA_0)
- r2 |= (0x10 << dn); /* Ultra mode */
+ r2 |= (0x01 << dn); /* Ultra mode */
else
- r2 |= (0x01 << dn); /* MWDMA */
+ r2 |= (0x10 << dn); /* MWDMA */
pci_write_config_dword(pdev, 0x44, r1);
pci_write_config_dword(pdev, 0x48, r2);
}
-#endif /* CONFIG_PATA_HPT3X3_DMA */
+
+/**
+ * hpt3x3_freeze - DMA workaround
+ * @ap: port to freeze
+ *
+ * When freezing an HPT3x3 we must stop any pending DMA before
+ * writing to the control register or the chip will hang
+ */
+
+static int hpt3x3_freeze(struct ata_port *ap)
+{
+ void __iomem *mmio = ap->ioaddr.bmdma_addr;
+
+ iowrite8(ioread8(mmio + ATA_DMA_CMD) & ~ ATA_DMA_START,
+ mmio + ATA_DMA_CMD);
+ ata_sff_dma_pause(ap);
+ ata_sff_freeze(ap);
+}
+
+/**
+ * hpt3x3_bmdma_setup - DMA workaround
+ * @qc: Queued command
+ *
+ * When issuing BMDMA we must clean up the error/active bits in
+ * software on this device
+ */
+
+static void hpt3x3_bmdma_setup(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ u8 r = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
+ r |= ATA_DMA_INTR | ATA_DMA_ERR;
+ iowrite8(r, ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
+ return ata_bmdma_setup(qc);
+}
/**
* hpt3x3_atapi_dma - ATAPI DMA check
@@ -101,18 +135,23 @@ static int hpt3x3_atapi_dma(struct ata_queued_cmd *qc)
return 1;
}
+#endif /* CONFIG_PATA_HPT3X3_DMA */
+
static struct scsi_host_template hpt3x3_sht = {
ATA_BMDMA_SHT(DRV_NAME),
};
static struct ata_port_operations hpt3x3_port_ops = {
.inherits = &ata_bmdma_port_ops,
- .check_atapi_dma= hpt3x3_atapi_dma,
.cable_detect = ata_cable_40wire,
.set_piomode = hpt3x3_set_piomode,
#if defined(CONFIG_PATA_HPT3X3_DMA)
.set_dmamode = hpt3x3_set_dmamode,
+ .bmdma_setup = hpt3x3_bmdma_setup,
+ .check_atapi_dma= hpt3x3_atapi_dma,
+ .freeze = hpt3x3_freeze,
#endif
+
};
/**
@@ -257,4 +296,4 @@ MODULE_DEVICE_TABLE(pci, hpt3x3);
MODULE_VERSION(DRV_VERSION);
module_init(hpt3x3_init);
-module_exit(hpt3x3_exit);
+module_exit(hpt3x3_exit); \ No newline at end of file
OpenPOWER on IntegriCloud