diff options
| author | Tejun Heo <htejun@gmail.com> | 2008-03-25 12:22:49 +0900 |
|---|---|---|
| committer | Jeff Garzik <jgarzik@redhat.com> | 2008-04-17 15:44:17 -0400 |
| commit | 887125e3740283be25564bfc6fb5d24974b651ab (patch) | |
| tree | bd037e1c17a468fabe1834e707b70b4b43513e4a /drivers/ata/pata_hpt3x2n.c | |
| parent | 1bd5b715a305f6f13455e89becbd839010dd14b5 (diff) | |
| download | op-kernel-dev-887125e3740283be25564bfc6fb5d24974b651ab.zip op-kernel-dev-887125e3740283be25564bfc6fb5d24974b651ab.tar.gz | |
libata: stop overloading port_info->private_data
port_info->private_data is currently used for two purposes - to record
private data about the port_info or to specify host->private_data to
use when allocating ata_host.
This overloading is confusing and counter-intuitive in that
port_info->private_data becomes host->private_data instead of
port->private_data. In addition, port_info and host don't correspond
to each other 1-to-1. Currently, the first non-NULL
port_info->private_data is used.
This patch makes port_info->private_data just be what it is -
private_data for the port_info where LLD can jot down extra info.
libata no longer sets host->private_data to the first non-NULL
port_info->private_data, @host_priv argument is added to
ata_pci_init_one() instead. LLDs which use ata_pci_init_one() can use
this argument to pass in pointer to host private data. LLDs which
don't should use init-register model anyway and can initialize
host->private_data directly.
Adding @host_priv instead of using init-register model for LLDs which
use ata_pci_init_one() is suggested by Alan Cox.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Diffstat (limited to 'drivers/ata/pata_hpt3x2n.c')
| -rw-r--r-- | drivers/ata/pata_hpt3x2n.c | 9 |
1 files changed, 4 insertions, 5 deletions
diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c index 2c178c3..c774be9 100644 --- a/drivers/ata/pata_hpt3x2n.c +++ b/drivers/ata/pata_hpt3x2n.c @@ -458,8 +458,7 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id) .udma_mask = ATA_UDMA6, .port_ops = &hpt3x2n_port_ops }; - struct ata_port_info port = info; - const struct ata_port_info *ppi[] = { &port, NULL }; + const struct ata_port_info *ppi[] = { &info, NULL }; u8 irqmask; u32 class_rev; @@ -468,6 +467,7 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id) unsigned int f_low, f_high; int adjust; unsigned long iobase = pci_resource_start(dev, 4); + void *hpriv = NULL; int rc; rc = pcim_enable_device(dev); @@ -554,9 +554,8 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id) pci_mhz); /* Set our private data up. We only need a few flags so we use it directly */ - port.private_data = NULL; if (pci_mhz > 60) { - port.private_data = (void *)PCI66; + hpriv = (void *)PCI66; /* * On HPT371N, if ATA clock is 66 MHz we must set bit 2 in * the MISC. register to stretch the UltraDMA Tss timing. @@ -567,7 +566,7 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id) } /* Now kick off ATA set up */ - return ata_pci_init_one(dev, ppi, &hpt3x2n_sht); + return ata_pci_init_one(dev, ppi, &hpt3x2n_sht, hpriv); } static const struct pci_device_id hpt3x2n[] = { |
