summaryrefslogtreecommitdiffstats
path: root/drivers/ata/pata_hpt366.c
diff options
context:
space:
mode:
authorJeff Garzik <jeff@garzik.org>2006-08-29 18:12:40 -0400
committerJeff Garzik <jeff@garzik.org>2006-08-29 18:12:40 -0400
commit669a5db411d85a14f86cd92bc16bf7ab5b8aa235 (patch)
tree8d4f9d63e18185695a4d97e1a3fa4e18b61c7345 /drivers/ata/pata_hpt366.c
parentb01e86fee6c821e4e003fd4e9f65453ac478a58e (diff)
downloadop-kernel-dev-669a5db411d85a14f86cd92bc16bf7ab5b8aa235.zip
op-kernel-dev-669a5db411d85a14f86cd92bc16bf7ab5b8aa235.tar.gz
[libata] Add a bunch of PATA drivers.
The vast majority of drivers and changes are from Alan Cox. Albert Lee contributed and maintains pata_pdc2027x. Adrian Bunk, Andrew Morton, and Tejun Heo contributed various minor fixes and updates. Signed-off-by: Jeff Garzik <jeff@garzik.org>
Diffstat (limited to 'drivers/ata/pata_hpt366.c')
-rw-r--r--drivers/ata/pata_hpt366.c478
1 files changed, 478 insertions, 0 deletions
diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
new file mode 100644
index 0000000..e54a0c5
--- /dev/null
+++ b/drivers/ata/pata_hpt366.c
@@ -0,0 +1,478 @@
+/*
+ * Libata driver for the highpoint 366 and 368 UDMA66 ATA controllers.
+ *
+ * This driver is heavily based upon:
+ *
+ * linux/drivers/ide/pci/hpt366.c Version 0.36 April 25, 2003
+ *
+ * Copyright (C) 1999-2003 Andre Hedrick <andre@linux-ide.org>
+ * Portions Copyright (C) 2001 Sun Microsystems, Inc.
+ * Portions Copyright (C) 2003 Red Hat Inc
+ *
+ *
+ * TODO
+ * Maybe PLL mode
+ * Look into engine reset on timeout errors. Should not be
+ * required.
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+
+#define DRV_NAME "pata_hpt366"
+#define DRV_VERSION "0.5"
+
+struct hpt_clock {
+ u8 xfer_speed;
+ u32 timing;
+};
+
+/* key for bus clock timings
+ * bit
+ * 0:3 data_high_time. inactive time of DIOW_/DIOR_ for PIO and MW
+ * DMA. cycles = value + 1
+ * 4:8 data_low_time. active time of DIOW_/DIOR_ for PIO and MW
+ * DMA. cycles = value + 1
+ * 9:12 cmd_high_time. inactive time of DIOW_/DIOR_ during task file
+ * register access.
+ * 13:17 cmd_low_time. active time of DIOW_/DIOR_ during task file
+ * register access.
+ * 18:21 udma_cycle_time. clock freq and clock cycles for UDMA xfer.
+ * during task file register access.
+ * 22:24 pre_high_time. time to initialize 1st cycle for PIO and MW DMA
+ * xfer.
+ * 25:27 cmd_pre_high_time. time to initialize 1st PIO cycle for task
+ * register access.
+ * 28 UDMA enable
+ * 29 DMA enable
+ * 30 PIO_MST enable. if set, the chip is in bus master mode during
+ * PIO.
+ * 31 FIFO enable.
+ */
+
+static const struct hpt_clock hpt366_40[] = {
+ { XFER_UDMA_4, 0x900fd943 },
+ { XFER_UDMA_3, 0x900ad943 },
+ { XFER_UDMA_2, 0x900bd943 },
+ { XFER_UDMA_1, 0x9008d943 },
+ { XFER_UDMA_0, 0x9008d943 },
+
+ { XFER_MW_DMA_2, 0xa008d943 },
+ { XFER_MW_DMA_1, 0xa010d955 },
+ { XFER_MW_DMA_0, 0xa010d9fc },
+
+ { XFER_PIO_4, 0xc008d963 },
+ { XFER_PIO_3, 0xc010d974 },
+ { XFER_PIO_2, 0xc010d997 },
+ { XFER_PIO_1, 0xc010d9c7 },
+ { XFER_PIO_0, 0xc018d9d9 },
+ { 0, 0x0120d9d9 }
+};
+
+static const struct hpt_clock hpt366_33[] = {
+ { XFER_UDMA_4, 0x90c9a731 },
+ { XFER_UDMA_3, 0x90cfa731 },
+ { XFER_UDMA_2, 0x90caa731 },
+ { XFER_UDMA_1, 0x90cba731 },
+ { XFER_UDMA_0, 0x90c8a731 },
+
+ { XFER_MW_DMA_2, 0xa0c8a731 },
+ { XFER_MW_DMA_1, 0xa0c8a732 }, /* 0xa0c8a733 */
+ { XFER_MW_DMA_0, 0xa0c8a797 },
+
+ { XFER_PIO_4, 0xc0c8a731 },
+ { XFER_PIO_3, 0xc0c8a742 },
+ { XFER_PIO_2, 0xc0d0a753 },
+ { XFER_PIO_1, 0xc0d0a7a3 }, /* 0xc0d0a793 */
+ { XFER_PIO_0, 0xc0d0a7aa }, /* 0xc0d0a7a7 */
+ { 0, 0x0120a7a7 }
+};
+
+static const struct hpt_clock hpt366_25[] = {
+ { XFER_UDMA_4, 0x90c98521 },
+ { XFER_UDMA_3, 0x90cf8521 },
+ { XFER_UDMA_2, 0x90cf8521 },
+ { XFER_UDMA_1, 0x90cb8521 },
+ { XFER_UDMA_0, 0x90cb8521 },
+
+ { XFER_MW_DMA_2, 0xa0ca8521 },
+ { XFER_MW_DMA_1, 0xa0ca8532 },
+ { XFER_MW_DMA_0, 0xa0ca8575 },
+
+ { XFER_PIO_4, 0xc0ca8521 },
+ { XFER_PIO_3, 0xc0ca8532 },
+ { XFER_PIO_2, 0xc0ca8542 },
+ { XFER_PIO_1, 0xc0d08572 },
+ { XFER_PIO_0, 0xc0d08585 },
+ { 0, 0x01208585 }
+};
+
+static const char *bad_ata33[] = {
+ "Maxtor 92720U8", "Maxtor 92040U6", "Maxtor 91360U4", "Maxtor 91020U3", "Maxtor 90845U3", "Maxtor 90650U2",
+ "Maxtor 91360D8", "Maxtor 91190D7", "Maxtor 91020D6", "Maxtor 90845D5", "Maxtor 90680D4", "Maxtor 90510D3", "Maxtor 90340D2",
+ "Maxtor 91152D8", "Maxtor 91008D7", "Maxtor 90845D6", "Maxtor 90840D6", "Maxtor 90720D5", "Maxtor 90648D5", "Maxtor 90576D4",
+ "Maxtor 90510D4",
+ "Maxtor 90432D3", "Maxtor 90288D2", "Maxtor 90256D2",
+ "Maxtor 91000D8", "Maxtor 90910D8", "Maxtor 90875D7", "Maxtor 90840D7", "Maxtor 90750D6", "Maxtor 90625D5", "Maxtor 90500D4",
+ "Maxtor 91728D8", "Maxtor 91512D7", "Maxtor 91303D6", "Maxtor 91080D5", "Maxtor 90845D4", "Maxtor 90680D4", "Maxtor 90648D3", "Maxtor 90432D2",
+ NULL
+};
+
+static const char *bad_ata66_4[] = {
+ "IBM-DTLA-307075",
+ "IBM-DTLA-307060",
+ "IBM-DTLA-307045",
+ "IBM-DTLA-307030",
+ "IBM-DTLA-307020",
+ "IBM-DTLA-307015",
+ "IBM-DTLA-305040",
+ "IBM-DTLA-305030",
+ "IBM-DTLA-305020",
+ "IC35L010AVER07-0",
+ "IC35L020AVER07-0",
+ "IC35L030AVER07-0",
+ "IC35L040AVER07-0",
+ "IC35L060AVER07-0",
+ "WDC AC310200R",
+ NULL
+};
+
+static const char *bad_ata66_3[] = {
+ "WDC AC310200R",
+ NULL
+};
+
+static int hpt_dma_blacklisted(const struct ata_device *dev, char *modestr, const char *list[])
+{
+ unsigned char model_num[40];
+ char *s;
+ unsigned int len;
+ int i = 0;
+
+ ata_id_string(dev->id, model_num, ATA_ID_PROD_OFS, sizeof(model_num));
+ s = &model_num[0];
+ len = strnlen(s, sizeof(model_num));
+
+ /* ATAPI specifies that empty space is blank-filled; remove blanks */
+ while ((len > 0) && (s[len - 1] == ' ')) {
+ len--;
+ s[len] = 0;
+ }
+
+ while(list[i] != NULL) {
+ if (!strncmp(list[i], s, len)) {
+ printk(KERN_WARNING DRV_NAME ": %s is not supported for %s.\n",
+ modestr, list[i]);
+ return 1;
+ }
+ i++;
+ }
+ return 0;
+}
+
+/**
+ * hpt366_filter - mode selection filter
+ * @ap: ATA interface
+ * @adev: ATA device
+ *
+ * Block UDMA on devices that cause trouble with this controller.
+ */
+
+static unsigned long hpt366_filter(const struct ata_port *ap, struct ata_device *adev, unsigned long mask)
+{
+ if (adev->class == ATA_DEV_ATA) {
+ if (hpt_dma_blacklisted(adev, "UDMA", bad_ata33))
+ mask &= ~ATA_MASK_UDMA;
+ if (hpt_dma_blacklisted(adev, "UDMA3", bad_ata66_3))
+ mask &= ~(0x07 << ATA_SHIFT_UDMA);
+ if (hpt_dma_blacklisted(adev, "UDMA4", bad_ata66_4))
+ mask &= ~(0x0F << ATA_SHIFT_UDMA);
+ }
+ return ata_pci_default_filter(ap, adev, mask);
+}
+
+/**
+ * hpt36x_find_mode - reset the hpt36x bus
+ * @ap: ATA port
+ * @speed: transfer mode
+ *
+ * Return the 32bit register programming information for this channel
+ * that matches the speed provided.
+ */
+
+static u32 hpt36x_find_mode(struct ata_port *ap, int speed)
+{
+ struct hpt_clock *clocks = ap->host->private_data;
+
+ while(clocks->xfer_speed) {
+ if (clocks->xfer_speed == speed)
+ return clocks->timing;
+ clocks++;
+ }
+ BUG();
+ return 0xffffffffU; /* silence compiler warning */
+}
+
+static int hpt36x_pre_reset(struct ata_port *ap)
+{
+ u8 ata66;
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+
+ pci_read_config_byte(pdev, 0x5A, &ata66);
+ if (ata66 & (1 << ap->port_no))
+ ap->cbl = ATA_CBL_PATA40;
+ else
+ ap->cbl = ATA_CBL_PATA80;
+ return ata_std_prereset(ap);
+}
+
+/**
+ * hpt36x_error_handler - reset the hpt36x bus
+ * @ap: ATA port to reset
+ *
+ * Perform the reset handling for the 366/368
+ */
+
+static void hpt36x_error_handler(struct ata_port *ap)
+{
+ ata_bmdma_drive_eh(ap, hpt36x_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+}
+
+/**
+ * hpt366_set_piomode - PIO setup
+ * @ap: ATA interface
+ * @adev: device on the interface
+ *
+ * Perform PIO mode setup.
+ */
+
+static void hpt366_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ u32 addr1, addr2;
+ u32 reg;
+ u32 mode;
+ u8 fast;
+
+ addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no);
+ addr2 = 0x51 + 4 * ap->port_no;
+
+ /* Fast interrupt prediction disable, hold off interrupt disable */
+ pci_read_config_byte(pdev, addr2, &fast);
+ if (fast & 0x80) {
+ fast &= ~0x80;
+ pci_write_config_byte(pdev, addr2, fast);
+ }
+
+ pci_read_config_dword(pdev, addr1, &reg);
+ mode = hpt36x_find_mode(ap, adev->pio_mode);
+ mode &= ~0x8000000; /* No FIFO in PIO */
+ mode &= ~0x30070000; /* Leave config bits alone */
+ reg &= 0x30070000; /* Strip timing bits */
+ pci_write_config_dword(pdev, addr1, reg | mode);
+}
+
+/**
+ * hpt366_set_dmamode - DMA timing setup
+ * @ap: ATA interface
+ * @adev: Device being configured
+ *
+ * Set up the channel for MWDMA or UDMA modes. Much the same as with
+ * PIO, load the mode number and then set MWDMA or UDMA flag.
+ */
+
+static void hpt366_set_dmamode(struct ata_port *ap, struct ata_device *adev)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ u32 addr1, addr2;
+ u32 reg;
+ u32 mode;
+ u8 fast;
+
+ addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no);
+ addr2 = 0x51 + 4 * ap->port_no;
+
+ /* Fast interrupt prediction disable, hold off interrupt disable */
+ pci_read_config_byte(pdev, addr2, &fast);
+ if (fast & 0x80) {
+ fast &= ~0x80;
+ pci_write_config_byte(pdev, addr2, fast);
+ }
+
+ pci_read_config_dword(pdev, addr1, &reg);
+ mode = hpt36x_find_mode(ap, adev->dma_mode);
+ mode |= 0x8000000; /* FIFO in MWDMA or UDMA */
+ mode &= ~0xC0000000; /* Leave config bits alone */
+ reg &= 0xC0000000; /* Strip timing bits */
+ pci_write_config_dword(pdev, addr1, reg | mode);
+}
+
+static struct scsi_host_template hpt36x_sht = {
+ .module = THIS_MODULE,
+ .name = DRV_NAME,
+ .ioctl = ata_scsi_ioctl,
+ .queuecommand = ata_scsi_queuecmd,
+ .can_queue = ATA_DEF_QUEUE,
+ .this_id = ATA_SHT_THIS_ID,
+ .sg_tablesize = LIBATA_MAX_PRD,
+ .max_sectors = ATA_MAX_SECTORS,
+ .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
+ .emulated = ATA_SHT_EMULATED,
+ .use_clustering = ATA_SHT_USE_CLUSTERING,
+ .proc_name = DRV_NAME,
+ .dma_boundary = ATA_DMA_BOUNDARY,
+ .slave_configure = ata_scsi_slave_config,
+ .bios_param = ata_std_bios_param,
+};
+
+/*
+ * Configuration for HPT366/68
+ */
+
+static struct ata_port_operations hpt366_port_ops = {
+ .port_disable = ata_port_disable,
+ .set_piomode = hpt366_set_piomode,
+ .set_dmamode = hpt366_set_dmamode,
+ .mode_filter = hpt366_filter,
+
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
+ .error_handler = hpt36x_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
+
+ .bmdma_setup = ata_bmdma_setup,
+ .bmdma_start = ata_bmdma_start,
+ .bmdma_stop = ata_bmdma_stop,
+ .bmdma_status = ata_bmdma_status,
+
+ .qc_prep = ata_qc_prep,
+ .qc_issue = ata_qc_issue_prot,
+ .eng_timeout = ata_eng_timeout,
+ .data_xfer = ata_pio_data_xfer,
+
+ .irq_handler = ata_interrupt,
+ .irq_clear = ata_bmdma_irq_clear,
+
+ .port_start = ata_port_start,
+ .port_stop = ata_port_stop,
+ .host_stop = ata_host_stop
+};
+
+/**
+ * hpt36x_init_one - Initialise an HPT366/368
+ * @dev: PCI device
+ * @id: Entry in match table
+ *
+ * Initialise an HPT36x device. There are some interesting complications
+ * here. Firstly the chip may report 366 and be one of several variants.
+ * Secondly all the timings depend on the clock for the chip which we must
+ * detect and look up
+ *
+ * This is the known chip mappings. It may be missing a couple of later
+ * releases.
+ *
+ * Chip version PCI Rev Notes
+ * HPT366 4 (HPT366) 0 UDMA66
+ * HPT366 4 (HPT366) 1 UDMA66
+ * HPT368 4 (HPT366) 2 UDMA66
+ * HPT37x/30x 4 (HPT366) 3+ Other driver
+ *
+ */
+
+static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+{
+ static struct ata_port_info info_hpt366 = {
+ .sht = &hpt36x_sht,
+ .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+ .pio_mask = 0x1f,
+ .mwdma_mask = 0x07,
+ .udma_mask = 0x1f,
+ .port_ops = &hpt366_port_ops
+ };
+ struct ata_port_info *port_info[2] = {&info_hpt366, &info_hpt366};
+
+ u32 class_rev;
+ u32 reg1;
+ u8 drive_fast;
+
+ pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
+ class_rev &= 0xFF;
+
+ /* May be a later chip in disguise. Check */
+ /* Newer chips are not in the HPT36x driver. Ignore them */
+ if (class_rev > 2)
+ return -ENODEV;
+
+ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, (L1_CACHE_BYTES / 4));
+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x78);
+ pci_write_config_byte(dev, PCI_MIN_GNT, 0x08);
+ pci_write_config_byte(dev, PCI_MAX_LAT, 0x08);
+
+ pci_read_config_byte(dev, 0x51, &drive_fast);
+ if (drive_fast & 0x80)
+ pci_write_config_byte(dev, 0x51, drive_fast & ~0x80);
+
+ pci_read_config_dword(dev, 0x40, &reg1);
+
+ /* PCI clocking determines the ATA timing values to use */
+ /* info_hpt366 is safe against re-entry so we can scribble on it */
+ switch(reg1 & 0x700) {
+ case 5:
+ info_hpt366.private_data = &hpt366_40;
+ break;
+ case 9:
+ info_hpt366.private_data = &hpt366_25;
+ break;
+ default:
+ info_hpt366.private_data = &hpt366_33;
+ break;
+ }
+ /* Now kick off ATA set up */
+ return ata_pci_init_one(dev, port_info, 2);
+}
+
+static struct pci_device_id hpt36x[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_TTI, PCI_DEVICE_ID_TTI_HPT366), },
+ { 0, },
+};
+
+static struct pci_driver hpt36x_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = hpt36x,
+ .probe = hpt36x_init_one,
+ .remove = ata_pci_remove_one
+};
+
+static int __init hpt36x_init(void)
+{
+ return pci_register_driver(&hpt36x_pci_driver);
+}
+
+
+static void __exit hpt36x_exit(void)
+{
+ pci_unregister_driver(&hpt36x_pci_driver);
+}
+
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("low-level driver for the Highpoint HPT366/368");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, hpt36x);
+MODULE_VERSION(DRV_VERSION);
+
+module_init(hpt36x_init);
+module_exit(hpt36x_exit);
OpenPOWER on IntegriCloud