[libata] Add a bunch of PATA drivers.

The vast majority of drivers and changes are from Alan Cox.  Albert Lee
contributed and maintains pata_pdc2027x.  Adrian Bunk, Andrew Morton,
and Tejun Heo contributed various minor fixes and updates.

Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 227 insertions, 0 deletions

diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c
new file mode 100644
index 0000000..322043d
--- /dev/null
+++ b/drivers/ata/pata_cypress.c
@@ -0,0 +1,227 @@
+/*
+ * pata_cypress.c 	- Cypress PATA for new ATA layer
+ *			  (C) 2006 Red Hat Inc
+ *			  Alan Cox <alan@redhat.com>
+ *
+ * Based heavily on
+ * linux/drivers/ide/pci/cy82c693.c		Version 0.40	Sep. 10, 2002
+ *
+ */
+ 
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+
+#define DRV_NAME "pata_cypress"
+#define DRV_VERSION "0.1.2"
+
+/* here are the offset definitions for the registers */
+
+enum {
+	CY82_IDE_CMDREG		= 0x04,
+	CY82_IDE_ADDRSETUP	= 0x48,
+	CY82_IDE_MASTER_IOR	= 0x4C,
+	CY82_IDE_MASTER_IOW	= 0x4D,
+	CY82_IDE_SLAVE_IOR	= 0x4E,
+	CY82_IDE_SLAVE_IOW	= 0x4F,
+	CY82_IDE_MASTER_8BIT	= 0x50,
+	CY82_IDE_SLAVE_8BIT	= 0x51,
+
+	CY82_INDEX_PORT		= 0x22,
+	CY82_DATA_PORT		= 0x23,
+
+	CY82_INDEX_CTRLREG1	= 0x01,
+	CY82_INDEX_CHANNEL0	= 0x30,
+	CY82_INDEX_CHANNEL1	= 0x31,
+	CY82_INDEX_TIMEOUT	= 0x32
+};
+
+static int cy82c693_pre_reset(struct ata_port *ap)
+{
+	ap->cbl = ATA_CBL_PATA40;
+	return ata_std_prereset(ap);
+}
+
+static void cy82c693_error_handler(struct ata_port *ap)
+{
+	ata_bmdma_drive_eh(ap, cy82c693_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+}
+
+/**
+ *	cy82c693_set_piomode	-	set initial PIO mode data
+ *	@ap: ATA interface
+ *	@adev: ATA device
+ *
+ *	Called to do the PIO mode setup.
+ */
+ 
+static void cy82c693_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	struct ata_timing t;
+	const unsigned long T = 1000000 / 33;
+	short time_16, time_8;
+	u32 addr;
+	
+	if (ata_timing_compute(adev, adev->pio_mode, &t, T, 1) < 0) {
+		printk(KERN_ERR DRV_NAME ": mome computation failed.\n");
+		return;
+	}
+
+	time_16 = FIT(t.recover, 0, 15) | (FIT(t.active, 0, 15) << 4);
+	time_8 = FIT(t.act8b, 0, 15) | (FIT(t.rec8b, 0, 15) << 4);
+	
+	if (adev->devno == 0) {
+		pci_read_config_dword(pdev, CY82_IDE_ADDRSETUP, &addr);
+		
+		addr &= ~0x0F;	/* Mask bits */
+		addr |= FIT(t.setup, 0, 15);
+		
+		pci_write_config_dword(pdev, CY82_IDE_ADDRSETUP, addr);
+		pci_write_config_byte(pdev, CY82_IDE_MASTER_IOR, time_16);
+		pci_write_config_byte(pdev, CY82_IDE_MASTER_IOW, time_16);
+		pci_write_config_byte(pdev, CY82_IDE_MASTER_8BIT, time_8);
+	} else {
+		pci_read_config_dword(pdev, CY82_IDE_ADDRSETUP, &addr);
+		
+		addr &= ~0xF0;	/* Mask bits */
+		addr |= (FIT(t.setup, 0, 15) << 4);
+
+		pci_write_config_dword(pdev, CY82_IDE_ADDRSETUP, addr);
+		pci_write_config_byte(pdev, CY82_IDE_SLAVE_IOR, time_16);
+		pci_write_config_byte(pdev, CY82_IDE_SLAVE_IOW, time_16);
+		pci_write_config_byte(pdev, CY82_IDE_SLAVE_8BIT, time_8);
+	}
+}
+
+/**
+ *	cy82c693_set_dmamode	-	set initial DMA mode data
+ *	@ap: ATA interface
+ *	@adev: ATA device
+ *
+ *	Called to do the DMA mode setup.
+ */
+ 
+static void cy82c693_set_dmamode(struct ata_port *ap, struct ata_device *adev)
+{
+	int reg = CY82_INDEX_CHANNEL0 + ap->port_no;
+	
+	/* Be afraid, be very afraid. Magic registers  in low I/O space */
+	outb(reg, 0x22);
+	outb(adev->dma_mode - XFER_MW_DMA_0, 0x23);
+	
+	/* 0x50 gives the best behaviour on the Alpha's using this chip */
+	outb(CY82_INDEX_TIMEOUT, 0x22);
+	outb(0x50, 0x23);
+}
+
+static struct scsi_host_template cy82c693_sht = {
+	.module			= THIS_MODULE,
+	.name			= DRV_NAME,
+	.ioctl			= ata_scsi_ioctl,
+	.queuecommand		= ata_scsi_queuecmd,
+	.can_queue		= ATA_DEF_QUEUE,
+	.this_id		= ATA_SHT_THIS_ID,
+	.sg_tablesize		= LIBATA_MAX_PRD,
+	.max_sectors		= ATA_MAX_SECTORS,
+	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
+	.emulated		= ATA_SHT_EMULATED,
+	.use_clustering		= ATA_SHT_USE_CLUSTERING,
+	.proc_name		= DRV_NAME,
+	.dma_boundary		= ATA_DMA_BOUNDARY,
+	.slave_configure	= ata_scsi_slave_config,
+	.bios_param		= ata_std_bios_param,
+};
+
+static struct ata_port_operations cy82c693_port_ops = {
+	.port_disable	= ata_port_disable,
+	.set_piomode	= cy82c693_set_piomode,
+	.set_dmamode	= cy82c693_set_dmamode,
+	.mode_filter	= ata_pci_default_filter,
+	
+	.tf_load	= ata_tf_load,
+	.tf_read	= ata_tf_read,
+	.check_status 	= ata_check_status,
+	.exec_command	= ata_exec_command,
+	.dev_select 	= ata_std_dev_select,
+
+	.freeze		= ata_bmdma_freeze,
+	.thaw		= ata_bmdma_thaw,
+	.error_handler	= cy82c693_error_handler,
+	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+
+	.bmdma_setup 	= ata_bmdma_setup,
+	.bmdma_start 	= ata_bmdma_start,
+	.bmdma_stop	= ata_bmdma_stop,
+	.bmdma_status 	= ata_bmdma_status,
+
+	.qc_prep 	= ata_qc_prep,
+	.qc_issue	= ata_qc_issue_prot,
+	.eng_timeout	= ata_eng_timeout,
+	.data_xfer	= ata_pio_data_xfer,
+
+	.irq_handler	= ata_interrupt,
+	.irq_clear	= ata_bmdma_irq_clear,
+	
+	.port_start	= ata_port_start,
+	.port_stop	= ata_port_stop,
+	.host_stop	= ata_host_stop
+};	
+
+static int cy82c693_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	static struct ata_port_info info = {
+		.sht = &cy82c693_sht,
+		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+		.pio_mask = 0x1f,
+		.mwdma_mask = 0x07,
+		.port_ops = &cy82c693_port_ops
+	};
+	static struct ata_port_info *port_info[1] = { &info };
+	
+	/* Devfn 1 is the ATA primary. The secondary is magic and on devfn2. For the
+	   moment we don't handle the secondary. FIXME */
+	   
+	if (PCI_FUNC(pdev->devfn) != 1)
+		return -ENODEV;
+	
+	return ata_pci_init_one(pdev, port_info, 1);
+}
+
+static struct pci_device_id cy82c693[] = {
+	{ PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{ 0, },
+};
+
+static struct pci_driver cy82c693_pci_driver = {
+        .name 		= DRV_NAME,
+	.id_table	= cy82c693,
+	.probe 		= cy82c693_init_one,
+	.remove		= ata_pci_remove_one
+};
+
+static int __init cy82c693_init(void)
+{
+	return pci_register_driver(&cy82c693_pci_driver);
+}
+
+
+static void __exit cy82c693_exit(void)
+{
+	pci_unregister_driver(&cy82c693_pci_driver);
+}
+
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("low-level driver for the CY82C693 PATA controller");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, cy82c693);
+MODULE_VERSION(DRV_VERSION);
+
+module_init(cy82c693_init);
+module_exit(cy82c693_exit);