summaryrefslogtreecommitdiffstats
path: root/drivers/ata/pata_cs5520.c
diff options
context:
space:
mode:
authorTejun Heo <htejun@gmail.com>2007-04-17 23:44:08 +0900
committerJeff Garzik <jeff@garzik.org>2007-04-28 14:16:06 -0400
commit5d728824efeda61d304153bfcf1378a3c18b7d70 (patch)
tree8a3d4ba0c1c650da5c161f11155e7c19f0fe78aa /drivers/ata/pata_cs5520.c
parent4447d35156169cf136e829eb6b5cac2d6370f2d9 (diff)
downloadop-kernel-dev-5d728824efeda61d304153bfcf1378a3c18b7d70.zip
op-kernel-dev-5d728824efeda61d304153bfcf1378a3c18b7d70.tar.gz
libata: convert the remaining PATA drivers to new init model
Convert pdc_adma, pata_cs5520, pata_isapnp, pata_ixp4xx_cf, pata_legacy, pata_mpc52xx, pata_mpiix, pata_pcmcia, pata_pdc2027x, pata_platform, pata_qdi, pata_scc and pata_winbond to new init model. * init_one()'s now follow more consistent init order * cs5520 now registers one host with two ports, not two hosts. If any of the two ports are disabled, it's made dummy as other drivers do. Tested pdc_adma and pata_legacy. Both are as broken as before. The rest are compile tested only. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Diffstat (limited to 'drivers/ata/pata_cs5520.c')
-rw-r--r--drivers/ata/pata_cs5520.c130
1 files changed, 71 insertions, 59 deletions
diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c
index b5b27ba..79bef0d 100644
--- a/drivers/ata/pata_cs5520.c
+++ b/drivers/ata/pata_cs5520.c
@@ -186,7 +186,6 @@ static struct ata_port_operations cs5520_port_ops = {
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
- .irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.irq_ack = ata_irq_ack,
@@ -194,91 +193,104 @@ static struct ata_port_operations cs5520_port_ops = {
.port_start = ata_port_start,
};
-static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
+ struct ata_port_info pi = {
+ .flags = ATA_FLAG_SLAVE_POSS,
+ .pio_mask = 0x1f,
+ .port_ops = &cs5520_port_ops,
+ };
+ const struct ata_port_info *ppi[2];
u8 pcicfg;
- void __iomem *iomap[5];
- static struct ata_probe_ent probe[2];
- int ports = 0;
+ void *iomap[5];
+ struct ata_host *host;
+ struct ata_ioports *ioaddr;
+ int i, rc;
/* IDE port enable bits */
- pci_read_config_byte(dev, 0x60, &pcicfg);
+ pci_read_config_byte(pdev, 0x60, &pcicfg);
/* Check if the ATA ports are enabled */
if ((pcicfg & 3) == 0)
return -ENODEV;
+ ppi[0] = ppi[1] = &ata_dummy_port_info;
+ if (pcicfg & 1)
+ ppi[0] = &pi;
+ if (pcicfg & 2)
+ ppi[1] = &pi;
+
if ((pcicfg & 0x40) == 0) {
- printk(KERN_WARNING DRV_NAME ": DMA mode disabled. Enabling.\n");
- pci_write_config_byte(dev, 0x60, pcicfg | 0x40);
+ dev_printk(KERN_WARNING, &pdev->dev,
+ "DMA mode disabled. Enabling.\n");
+ pci_write_config_byte(pdev, 0x60, pcicfg | 0x40);
}
+ pi.mwdma_mask = id->driver_data;
+
+ host = ata_host_alloc_pinfo(&pdev->dev, ppi, 2);
+ if (!host)
+ return -ENOMEM;
+
/* Perform set up for DMA */
- if (pci_enable_device_bars(dev, 1<<2)) {
+ if (pci_enable_device_bars(pdev, 1<<2)) {
printk(KERN_ERR DRV_NAME ": unable to configure BAR2.\n");
return -ENODEV;
}
- pci_set_master(dev);
- if (pci_set_dma_mask(dev, DMA_32BIT_MASK)) {
+
+ if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
printk(KERN_ERR DRV_NAME ": unable to configure DMA mask.\n");
return -ENODEV;
}
- if (pci_set_consistent_dma_mask(dev, DMA_32BIT_MASK)) {
+ if (pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK)) {
printk(KERN_ERR DRV_NAME ": unable to configure consistent DMA mask.\n");
return -ENODEV;
}
- /* Map IO ports */
- iomap[0] = devm_ioport_map(&dev->dev, 0x1F0, 8);
- iomap[1] = devm_ioport_map(&dev->dev, 0x3F6, 1);
- iomap[2] = devm_ioport_map(&dev->dev, 0x170, 8);
- iomap[3] = devm_ioport_map(&dev->dev, 0x376, 1);
- iomap[4] = pcim_iomap(dev, 2, 0);
+ /* Map IO ports and initialize host accordingly */
+ iomap[0] = devm_ioport_map(&pdev->dev, 0x1F0, 8);
+ iomap[1] = devm_ioport_map(&pdev->dev, 0x3F6, 1);
+ iomap[2] = devm_ioport_map(&pdev->dev, 0x170, 8);
+ iomap[3] = devm_ioport_map(&pdev->dev, 0x376, 1);
+ iomap[4] = pcim_iomap(pdev, 2, 0);
if (!iomap[0] || !iomap[1] || !iomap[2] || !iomap[3] || !iomap[4])
return -ENOMEM;
- /* We have to do our own plumbing as the PCI setup for this
- chipset is non-standard so we can't punt to the libata code */
-
- INIT_LIST_HEAD(&probe[0].node);
- probe[0].dev = pci_dev_to_dev(dev);
- probe[0].port_ops = &cs5520_port_ops;
- probe[0].sht = &cs5520_sht;
- probe[0].pio_mask = 0x1F;
- probe[0].mwdma_mask = id->driver_data;
- probe[0].irq = 14;
- probe[0].irq_flags = 0;
- probe[0].port_flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST;
- probe[0].n_ports = 1;
- probe[0].port[0].cmd_addr = iomap[0];
- probe[0].port[0].ctl_addr = iomap[1];
- probe[0].port[0].altstatus_addr = iomap[1];
- probe[0].port[0].bmdma_addr = iomap[4];
-
- /* The secondary lurks at different addresses but is otherwise
- the same beastie */
-
- probe[1] = probe[0];
- INIT_LIST_HEAD(&probe[1].node);
- probe[1].irq = 15;
- probe[1].port[0].cmd_addr = iomap[2];
- probe[1].port[0].ctl_addr = iomap[3];
- probe[1].port[0].altstatus_addr = iomap[3];
- probe[1].port[0].bmdma_addr = iomap[4] + 8;
-
- /* Let libata fill in the port details */
- ata_std_ports(&probe[0].port[0]);
- ata_std_ports(&probe[1].port[0]);
-
- /* Now add the ports that are active */
- if (pcicfg & 1)
- ports += ata_device_add(&probe[0]);
- if (pcicfg & 2)
- ports += ata_device_add(&probe[1]);
- if (ports)
- return 0;
- return -ENODEV;
+ ioaddr = &host->ports[0]->ioaddr;
+ ioaddr->cmd_addr = iomap[0];
+ ioaddr->ctl_addr = iomap[1];
+ ioaddr->altstatus_addr = iomap[1];
+ ioaddr->bmdma_addr = iomap[4];
+ ata_std_ports(ioaddr);
+
+ ioaddr = &host->ports[1]->ioaddr;
+ ioaddr->cmd_addr = iomap[2];
+ ioaddr->ctl_addr = iomap[3];
+ ioaddr->altstatus_addr = iomap[3];
+ ioaddr->bmdma_addr = iomap[4] + 8;
+ ata_std_ports(ioaddr);
+
+ /* activate the host */
+ pci_set_master(pdev);
+ rc = ata_host_start(host);
+ if (rc)
+ return rc;
+
+ for (i = 0; i < 2; i++) {
+ static const int irq[] = { 14, 15 };
+ struct ata_port *ap = host->ports[0];
+
+ if (ata_port_is_dummy(ap))
+ continue;
+
+ rc = devm_request_irq(&pdev->dev, irq[ap->port_no],
+ ata_interrupt, 0, DRV_NAME, host);
+ if (rc)
+ return rc;
+ }
+
+ return ata_host_register(host, &cs5520_sht);
}
/**
OpenPOWER on IntegriCloud