[libata] Add a bunch of PATA drivers.

The vast majority of drivers and changes are from Alan Cox.  Albert Lee
contributed and maintains pata_pdc2027x.  Adrian Bunk, Andrew Morton,
and Tejun Heo contributed various minor fixes and updates.

Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 505 insertions, 0 deletions

diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c
new file mode 100644
index 0000000..03284611
--- /dev/null
+++ b/drivers/ata/pata_cmd64x.c
@@ -0,0 +1,505 @@
+/*
+ * pata_cmd64x.c 	- ATI PATA for new ATA layer
+ *			  (C) 2005 Red Hat Inc
+ *			  Alan Cox <alan@redhat.com>
+ *
+ * Based upon
+ * linux/drivers/ide/pci/cmd64x.c		Version 1.30	Sept 10, 2002
+ *
+ * cmd64x.c: Enable interrupts at initialization time on Ultra/PCI machines.
+ *           Note, this driver is not used at all on other systems because
+ *           there the "BIOS" has done all of the following already.
+ *           Due to massive hardware bugs, UltraDMA is only supported
+ *           on the 646U2 and not on the 646U.
+ *
+ * Copyright (C) 1998		Eddie C. Dost  (ecd@skynet.be)
+ * Copyright (C) 1998		David S. Miller (davem@redhat.com)
+ *
+ * Copyright (C) 1999-2002	Andre Hedrick <andre@linux-ide.org>
+ *
+ * TODO
+ *	Testing work
+ */
+ 
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+
+#define DRV_NAME "pata_cmd64x"
+#define DRV_VERSION "0.2.1"
+
+/*
+ * CMD64x specific registers definition.
+ */
+ 
+enum {
+	CFR 		= 0x50,
+		CFR_INTR_CH0  = 0x02,
+	CNTRL 		= 0x51,
+		CNTRL_DIS_RA0 = 0x40,
+		CNTRL_DIS_RA1 = 0x80,
+		CNTRL_ENA_2ND = 0x08,
+	CMDTIM 		= 0x52,
+	ARTTIM0 	= 0x53,
+	DRWTIM0 	= 0x54,
+	ARTTIM1 	= 0x55,
+	DRWTIM1 	= 0x56,
+	ARTTIM23 	= 0x57,
+		ARTTIM23_DIS_RA2  = 0x04,
+		ARTTIM23_DIS_RA3  = 0x08,
+		ARTTIM23_INTR_CH1 = 0x10,
+	ARTTIM2 	= 0x57,
+	ARTTIM3 	= 0x57,
+	DRWTIM23	= 0x58,
+	DRWTIM2 	= 0x58,
+	BRST 		= 0x59,
+	DRWTIM3 	= 0x5b,
+	BMIDECR0	= 0x70,
+	MRDMODE		= 0x71,
+		MRDMODE_INTR_CH0 = 0x04,
+		MRDMODE_INTR_CH1 = 0x08,
+		MRDMODE_BLK_CH0  = 0x10,
+		MRDMODE_BLK_CH1	 = 0x20,
+	BMIDESR0	= 0x72,
+	UDIDETCR0	= 0x73,
+	DTPR0		= 0x74,
+	BMIDECR1	= 0x78,
+	BMIDECSR	= 0x79,
+	BMIDESR1	= 0x7A,
+	UDIDETCR1	= 0x7B,
+	DTPR1		= 0x7C
+};
+
+static int cmd64x_pre_reset(struct ata_port *ap)
+{
+	ap->cbl = ATA_CBL_PATA40;
+	return ata_std_prereset(ap);
+}
+
+static int cmd648_pre_reset(struct ata_port *ap)
+{
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	u8 r;
+
+	/* Check cable detect bits */
+	pci_read_config_byte(pdev, BMIDECSR, &r);
+	if (r & (1 << ap->port_no))
+		ap->cbl = ATA_CBL_PATA80;
+	else	
+		ap->cbl = ATA_CBL_PATA40;
+		
+	return ata_std_prereset(ap);
+}
+
+static void cmd64x_error_handler(struct ata_port *ap)
+{
+	return ata_bmdma_drive_eh(ap, cmd64x_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+}
+
+static void cmd648_error_handler(struct ata_port *ap)
+{
+	ata_bmdma_drive_eh(ap, cmd648_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+}
+
+/**
+ *	cmd64x_set_piomode	-	set initial PIO mode data
+ *	@ap: ATA interface
+ *	@adev: ATA device
+ *
+ *	Called to do the PIO mode setup.
+ */
+ 
+static void cmd64x_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	struct ata_timing t;
+	const unsigned long T = 1000000 / 33;
+	const u8 setup_data[] = { 0x40, 0x40, 0x40, 0x80, 0x00 };
+	
+	u8 reg;
+	
+	/* Port layout is not logical so use a table */
+	const u8 arttim_port[2][2] = { 
+		{ ARTTIM0, ARTTIM1 },
+		{ ARTTIM23, ARTTIM23 }
+	};
+	const u8 drwtim_port[2][2] = {
+		{ DRWTIM0, DRWTIM1 },
+		{ DRWTIM2, DRWTIM3 }
+	};
+	
+	int arttim = arttim_port[ap->port_no][adev->devno];
+	int drwtim = drwtim_port[ap->port_no][adev->devno];
+	
+	
+	if (ata_timing_compute(adev, adev->pio_mode, &t, T, 0) < 0) {
+		printk(KERN_ERR DRV_NAME ": mode computation failed.\n");
+		return;
+	}
+	if (ap->port_no) {
+		/* Slave has shared address setup */
+		struct ata_device *pair = ata_dev_pair(adev);
+		
+		if (pair) {
+			struct ata_timing tp;
+			ata_timing_compute(pair, pair->pio_mode, &tp, T, 0);
+			ata_timing_merge(&t, &tp, &t, ATA_TIMING_SETUP);
+		}
+	}
+	
+	printk(KERN_DEBUG DRV_NAME ": active %d recovery %d setup %d.\n",
+		t.active, t.recover, t.setup);
+	if (t.recover > 16) {
+		t.active += t.recover - 16;
+		t.recover = 16;
+	}
+	if (t.active > 16)
+		t.active = 16;
+		
+	/* Now convert the clocks into values we can actually stuff into
+	   the chip */
+	   
+	if (t.recover > 1)
+		t.recover--;
+	else
+		t.recover = 15;
+	
+	if (t.setup > 4)
+		t.setup = 0xC0;
+	else
+		t.setup = setup_data[t.setup];
+		
+	t.active &= 0x0F;	/* 0 = 16 */
+	
+	/* Load setup timing */
+	pci_read_config_byte(pdev, arttim, &reg);
+	reg &= 0x3F;
+	reg |= t.setup;
+	pci_write_config_byte(pdev, arttim, reg);
+	
+	/* Load active/recovery */
+	pci_write_config_byte(pdev, drwtim, (t.active << 4) | t.recover);	
+}
+
+/**
+ *	cmd64x_set_dmamode	-	set initial DMA mode data
+ *	@ap: ATA interface
+ *	@adev: ATA device
+ *
+ *	Called to do the DMA mode setup.
+ */
+ 
+static void cmd64x_set_dmamode(struct ata_port *ap, struct ata_device *adev)
+{
+	static const u8 udma_data[] = {
+		0x31, 0x21, 0x11, 0x25, 0x15, 0x05
+	};
+	static const u8 mwdma_data[] = { 
+		0x30, 0x20, 0x10
+	};
+	
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	u8 regU, regD;
+
+	int pciU = UDIDETCR0 + 8 * ap->port_no;
+	int pciD = BMIDESR0 + 8 * ap->port_no;
+	int shift = 2 * adev->devno;
+	
+	pci_read_config_byte(pdev, pciD, &regD);
+	pci_read_config_byte(pdev, pciU, &regU);
+
+	regD &= ~(0x20 << shift);
+	regU &= ~(0x35 << shift);
+	
+	if (adev->dma_mode >= XFER_UDMA_0)
+		regU |= udma_data[adev->dma_mode - XFER_UDMA_0] << shift;
+	else
+		regD |= mwdma_data[adev->dma_mode - XFER_MW_DMA_0] << shift;
+
+	regD |= 0x20 << adev->devno;
+
+	pci_write_config_byte(pdev, pciU, regU);
+	pci_write_config_byte(pdev, pciD, regD);
+}
+
+/**
+ *	cmd648_dma_stop	-	DMA stop callback
+ *	@qc: Command in progress
+ *
+ *	DMA has completed.
+ */
+
+static void cmd648_bmdma_stop(struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	u8 dma_intr;
+	int dma_reg = ap->port_no ? ARTTIM23_INTR_CH1 : CFR_INTR_CH0;
+	int dma_mask = ap->port_no ? ARTTIM2 : CFR;
+	
+	ata_bmdma_stop(qc);
+	
+	pci_read_config_byte(pdev, dma_reg, &dma_intr);
+	pci_write_config_byte(pdev, dma_reg, dma_intr | dma_mask);
+}
+		
+/**
+ *	cmd646r1_dma_stop	-	DMA stop callback
+ *	@qc: Command in progress
+ *
+ *	Stub for now while investigating the r1 quirk in the old driver.
+ */
+
+static void cmd646r1_bmdma_stop(struct ata_queued_cmd *qc)
+{
+	ata_bmdma_stop(qc);
+}
+		
+static struct scsi_host_template cmd64x_sht = {
+	.module			= THIS_MODULE,
+	.name			= DRV_NAME,
+	.ioctl			= ata_scsi_ioctl,
+	.queuecommand		= ata_scsi_queuecmd,
+	.can_queue		= ATA_DEF_QUEUE,
+	.this_id		= ATA_SHT_THIS_ID,
+	.sg_tablesize		= LIBATA_MAX_PRD,
+	.max_sectors		= ATA_MAX_SECTORS,
+	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
+	.emulated		= ATA_SHT_EMULATED,
+	.use_clustering		= ATA_SHT_USE_CLUSTERING,
+	.proc_name		= DRV_NAME,
+	.dma_boundary		= ATA_DMA_BOUNDARY,
+	.slave_configure	= ata_scsi_slave_config,
+	.bios_param		= ata_std_bios_param,
+};
+
+static struct ata_port_operations cmd64x_port_ops = {
+	.port_disable	= ata_port_disable,
+	.set_piomode	= cmd64x_set_piomode,
+	.set_dmamode	= cmd64x_set_dmamode,
+	.mode_filter	= ata_pci_default_filter,
+	.tf_load	= ata_tf_load,
+	.tf_read	= ata_tf_read,
+	.check_status 	= ata_check_status,
+	.exec_command	= ata_exec_command,
+	.dev_select 	= ata_std_dev_select,
+
+	.freeze		= ata_bmdma_freeze,
+	.thaw		= ata_bmdma_thaw,
+	.error_handler	= cmd64x_error_handler,
+	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+
+	.bmdma_setup 	= ata_bmdma_setup,
+	.bmdma_start 	= ata_bmdma_start,
+	.bmdma_stop	= ata_bmdma_stop,
+	.bmdma_status 	= ata_bmdma_status,
+
+	.qc_prep 	= ata_qc_prep,
+	.qc_issue	= ata_qc_issue_prot,
+	.eng_timeout	= ata_eng_timeout,
+	.data_xfer	= ata_pio_data_xfer,
+
+	.irq_handler	= ata_interrupt,
+	.irq_clear	= ata_bmdma_irq_clear,
+	
+	.port_start	= ata_port_start,
+	.port_stop	= ata_port_stop,
+	.host_stop	= ata_host_stop
+};	
+
+static struct ata_port_operations cmd646r1_port_ops = {
+	.port_disable	= ata_port_disable,
+	.set_piomode	= cmd64x_set_piomode,
+	.set_dmamode	= cmd64x_set_dmamode,
+	.mode_filter	= ata_pci_default_filter,
+	.tf_load	= ata_tf_load,
+	.tf_read	= ata_tf_read,
+	.check_status 	= ata_check_status,
+	.exec_command	= ata_exec_command,
+	.dev_select 	= ata_std_dev_select,
+
+	.freeze		= ata_bmdma_freeze,
+	.thaw		= ata_bmdma_thaw,
+	.error_handler	= cmd64x_error_handler,
+	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+
+	.bmdma_setup 	= ata_bmdma_setup,
+	.bmdma_start 	= ata_bmdma_start,
+	.bmdma_stop	= cmd646r1_bmdma_stop,
+	.bmdma_status 	= ata_bmdma_status,
+
+	.qc_prep 	= ata_qc_prep,
+	.qc_issue	= ata_qc_issue_prot,
+	.eng_timeout	= ata_eng_timeout,
+	.data_xfer	= ata_pio_data_xfer,
+
+	.irq_handler	= ata_interrupt,
+	.irq_clear	= ata_bmdma_irq_clear,
+	
+	.port_start	= ata_port_start,
+	.port_stop	= ata_port_stop,
+	.host_stop	= ata_host_stop
+};	
+
+static struct ata_port_operations cmd648_port_ops = {
+	.port_disable	= ata_port_disable,
+	.set_piomode	= cmd64x_set_piomode,
+	.set_dmamode	= cmd64x_set_dmamode,
+	.mode_filter	= ata_pci_default_filter,
+	.tf_load	= ata_tf_load,
+	.tf_read	= ata_tf_read,
+	.check_status 	= ata_check_status,
+	.exec_command	= ata_exec_command,
+	.dev_select 	= ata_std_dev_select,
+
+	.freeze		= ata_bmdma_freeze,
+	.thaw		= ata_bmdma_thaw,
+	.error_handler	= cmd648_error_handler,
+	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+
+	.bmdma_setup 	= ata_bmdma_setup,
+	.bmdma_start 	= ata_bmdma_start,
+	.bmdma_stop	= cmd648_bmdma_stop,
+	.bmdma_status 	= ata_bmdma_status,
+
+	.qc_prep 	= ata_qc_prep,
+	.qc_issue	= ata_qc_issue_prot,
+	.eng_timeout	= ata_eng_timeout,
+	.data_xfer	= ata_pio_data_xfer,
+
+	.irq_handler	= ata_interrupt,
+	.irq_clear	= ata_bmdma_irq_clear,
+	
+	.port_start	= ata_port_start,
+	.port_stop	= ata_port_stop,
+	.host_stop	= ata_host_stop
+};	
+	
+static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	u32 class_rev;
+	
+	static struct ata_port_info cmd_info[6] = {
+		{	/* CMD 643 - no UDMA */
+			.sht = &cmd64x_sht,
+			.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+			.pio_mask = 0x1f,
+			.mwdma_mask = 0x07,
+			.port_ops = &cmd64x_port_ops
+		},
+		{	/* CMD 646 with broken UDMA */
+			.sht = &cmd64x_sht,
+			.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+			.pio_mask = 0x1f,
+			.mwdma_mask = 0x07,
+			.port_ops = &cmd64x_port_ops
+		},
+		{	/* CMD 646 with working UDMA */
+			.sht = &cmd64x_sht,
+			.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+			.pio_mask = 0x1f,
+			.mwdma_mask = 0x07,
+			.udma_mask = ATA_UDMA1,
+			.port_ops = &cmd64x_port_ops
+		},
+		{	/* CMD 646 rev 1  */
+			.sht = &cmd64x_sht,
+			.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+			.pio_mask = 0x1f,
+			.mwdma_mask = 0x07,
+			.port_ops = &cmd646r1_port_ops
+		},
+		{	/* CMD 648 */
+			.sht = &cmd64x_sht,
+			.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+			.pio_mask = 0x1f,
+			.mwdma_mask = 0x07,
+			.udma_mask = ATA_UDMA2,
+			.port_ops = &cmd648_port_ops
+		},
+		{	/* CMD 649 */
+			.sht = &cmd64x_sht,
+			.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+			.pio_mask = 0x1f,
+			.mwdma_mask = 0x07,
+			.udma_mask = ATA_UDMA3,
+			.port_ops = &cmd648_port_ops
+		}
+	};
+	static struct ata_port_info *port_info[2], *info;
+	u8 mrdmode;
+	
+	info = &cmd_info[id->driver_data];
+	
+	pci_read_config_dword(pdev, PCI_CLASS_REVISION, &class_rev);
+	class_rev &= 0xFF;
+	
+	if (id->driver_data == 0)	/* 643 */
+		ata_pci_clear_simplex(pdev);
+	
+	if (pdev->device == PCI_DEVICE_ID_CMD_646) {
+		/* Does UDMA work ? */
+		if (class_rev > 4)
+			info = &cmd_info[2];
+		/* Early rev with other problems ? */
+		else if (class_rev == 1)
+			info = &cmd_info[3];
+	}
+
+	pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 64);
+	pci_read_config_byte(pdev, MRDMODE, &mrdmode);
+	mrdmode &= ~ 0x30;	/* IRQ set up */
+	mrdmode |= 0x02;	/* Memory read line enable */
+	pci_write_config_byte(pdev, MRDMODE, mrdmode);
+	
+	/* Force PIO 0 here.. */
+	
+	/* PPC specific fixup copied from old driver */
+#ifdef CONFIG_PPC
+	pci_write_config_byte(pdev, UDIDETCR0, 0xF0);
+#endif
+	
+	port_info[0] = port_info[1] = info;
+	return ata_pci_init_one(pdev, port_info, 2);
+}
+
+static struct pci_device_id cmd64x[] = {
+	{ PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_CMD_643, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{ PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_CMD_646, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
+	{ PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_CMD_648, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4},
+	{ PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_CMD_649, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5},
+	{ 0, },
+};
+
+static struct pci_driver cmd64x_pci_driver = {
+        .name 		= DRV_NAME,
+	.id_table	= cmd64x,
+	.probe 		= cmd64x_init_one,
+	.remove		= ata_pci_remove_one
+};
+
+static int __init cmd64x_init(void)
+{
+	return pci_register_driver(&cmd64x_pci_driver);
+}
+
+
+static void __exit cmd64x_exit(void)
+{
+	pci_unregister_driver(&cmd64x_pci_driver);
+}
+
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("low-level driver for CMD64x series PATA controllers");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, cmd64x);
+MODULE_VERSION(DRV_VERSION);
+
+module_init(cmd64x_init);
+module_exit(cmd64x_exit);