diff options
| author | Tejun Heo <htejun@gmail.com> | 2008-03-25 12:22:47 +0900 |
|---|---|---|
| committer | Jeff Garzik <jgarzik@redhat.com> | 2008-04-17 15:44:16 -0400 |
| commit | f08048e94564d009b19038cfbdd800aa83e79c7f (patch) | |
| tree | 4afa7e4fff9ec716e9acbe746a464cda5daec063 /drivers/ata/pata_cmd640.c | |
| parent | b558edddb1c42c70a30cfe494984d4be409f7b2b (diff) | |
| download | op-kernel-dev-f08048e94564d009b19038cfbdd800aa83e79c7f.zip op-kernel-dev-f08048e94564d009b19038cfbdd800aa83e79c7f.tar.gz | |
libata: PCI device should be powered up before being accessed
PCI device should be powered up or powered up before its PCI regsiters
are accessed. Although PCI configuration register access is allowed
in D3hot, PCI device is free to reset its status when transiting from
D3hot to D0 causing configuration data to change.
Many libata SFF drivers which use ata_pci_init_one() read and update
configuration registers before calling ata_pci_init_one() which
enables the PCI device. Also, in resume paths, some drivers access
registers without resuming the PCI device.
This patch adds a call to pcim_enable_device() in init path if
register is accessed before calling ata_pci_init_one() and make resume
paths first resume PCI devices, access PCI configuration regiters then
resume ATA host.
While at it...
* cmd640 was strange in that it set ->resume even when CONFIG_PM is
not. This is by-product of minimal build fix. Updated.
* In cs5530, Don't BUG() on reinit failure. Just whine and fail
resume.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Diffstat (limited to 'drivers/ata/pata_cmd640.c')
| -rw-r--r-- | drivers/ata/pata_cmd640.c | 21 |
1 files changed, 16 insertions, 5 deletions
diff --git a/drivers/ata/pata_cmd640.c b/drivers/ata/pata_cmd640.c index 43d198f..0ef1d1d 100644 --- a/drivers/ata/pata_cmd640.c +++ b/drivers/ata/pata_cmd640.c @@ -254,20 +254,31 @@ static int cmd640_init_one(struct pci_dev *pdev, const struct pci_device_id *id) .port_ops = &cmd640_port_ops }; const struct ata_port_info *ppi[] = { &info, NULL }; + int rc; + + rc = pcim_enable_device(pdev); + if (rc) + return rc; cmd640_hardware_init(pdev); + return ata_pci_init_one(pdev, ppi); } +#ifdef CONFIG_PM static int cmd640_reinit_one(struct pci_dev *pdev) { + struct ata_host *host = dev_get_drvdata(&pdev->dev); + int rc; + + rc = ata_pci_device_do_resume(pdev); + if (rc) + return rc; cmd640_hardware_init(pdev); -#ifdef CONFIG_PM - return ata_pci_device_resume(pdev); -#else + ata_host_resume(host); return 0; -#endif } +#endif static const struct pci_device_id cmd640[] = { { PCI_VDEVICE(CMD, 0x640), 0 }, @@ -281,8 +292,8 @@ static struct pci_driver cmd640_pci_driver = { .remove = ata_pci_remove_one, #ifdef CONFIG_PM .suspend = ata_pci_device_suspend, -#endif .resume = cmd640_reinit_one, +#endif }; static int __init cmd640_init(void) |
