libata: convert to chained sg

libata used private sg iterator to handle padding sg.  Now that sg can
be chained, padding can be handled using standard sg ops.  Convert to
chained sg.

* s/qc->__sg/qc->sg/

* s/qc->pad_sgent/qc->extra_sg[]/.  Because chaining consumes one sg
  entry.  There need to be two extra sg entries.  The renaming is also
  for future addition of other extra sg entries.

* Padding setup is moved into ata_sg_setup_extra() which is organized
  in a way that future addition of other extra sg entries is easy.

* qc->orig_n_elem is unused and removed.

* qc->n_elem now contains the number of sg entries that LLDs should
  map.  qc->mapped_n_elem is added to carry the original number of
  mapped sgs for unmapping.

* The last sg of the original sg list is used to chain to extra sg
  list.  The original last sg is pointed to by qc->last_sg and the
  content is stored in qc->saved_last_sg.  It's restored during
  ata_sg_clean().

* All sg walking code has been updated.  Unnecessary assertions and
  checks for conditions the core layer already guarantees are removed.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 8 insertions, 5 deletions

diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c
index 41cd921..a32e3c4 100644
--- a/drivers/ata/pata_bf54x.c
+++ b/drivers/ata/pata_bf54x.c
@@ -832,6 +832,7 @@ static void bfin_bmdma_setup(struct ata_queued_cmd *qc)
 {
 	unsigned short config = WDSIZE_16;
 	struct scatterlist *sg;
+	unsigned int si;
 
 	pr_debug("in atapi dma setup\n");
 	/* Program the ATA_CTRL register with dir */
@@ -839,7 +840,7 @@ static void bfin_bmdma_setup(struct ata_queued_cmd *qc)
 		/* fill the ATAPI DMA controller */
 		set_dma_config(CH_ATAPI_TX, config);
 		set_dma_x_modify(CH_ATAPI_TX, 2);
-		ata_for_each_sg(sg, qc) {
+		for_each_sg(qc->sg, sg, qc->n_elem, si) {
 			set_dma_start_addr(CH_ATAPI_TX, sg_dma_address(sg));
 			set_dma_x_count(CH_ATAPI_TX, sg_dma_len(sg) >> 1);
 		}
@@ -848,7 +849,7 @@ static void bfin_bmdma_setup(struct ata_queued_cmd *qc)
 		/* fill the ATAPI DMA controller */
 		set_dma_config(CH_ATAPI_RX, config);
 		set_dma_x_modify(CH_ATAPI_RX, 2);
-		ata_for_each_sg(sg, qc) {
+		for_each_sg(qc->sg, sg, qc->n_elem, si) {
 			set_dma_start_addr(CH_ATAPI_RX, sg_dma_address(sg));
 			set_dma_x_count(CH_ATAPI_RX, sg_dma_len(sg) >> 1);
 		}
@@ -867,6 +868,7 @@ static void bfin_bmdma_start(struct ata_queued_cmd *qc)
 	struct ata_port *ap = qc->ap;
 	void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
 	struct scatterlist *sg;
+	unsigned int si;
 
 	pr_debug("in atapi dma start\n");
 	if (!(ap->udma_mask || ap->mwdma_mask))
@@ -881,7 +883,7 @@ static void bfin_bmdma_start(struct ata_queued_cmd *qc)
 		 * data cache is enabled. Otherwise, this loop
 		 * is an empty loop and optimized out.
 		 */
-		ata_for_each_sg(sg, qc) {
+		for_each_sg(qc->sg, sg, qc->n_elem, si) {
 			flush_dcache_range(sg_dma_address(sg),
 				sg_dma_address(sg) + sg_dma_len(sg));
 		}
@@ -910,7 +912,7 @@ static void bfin_bmdma_start(struct ata_queued_cmd *qc)
 	ATAPI_SET_CONTROL(base, ATAPI_GET_CONTROL(base) | TFRCNT_RST);
 
 		/* Set transfer length to buffer len */
-	ata_for_each_sg(sg, qc) {
+	for_each_sg(qc->sg, sg, qc->n_elem, si) {
 		ATAPI_SET_XFER_LEN(base, (sg_dma_len(sg) >> 1));
 	}
 
@@ -932,6 +934,7 @@ static void bfin_bmdma_stop(struct ata_queued_cmd *qc)
 {
 	struct ata_port *ap = qc->ap;
 	struct scatterlist *sg;
+	unsigned int si;
 
 	pr_debug("in atapi dma stop\n");
 	if (!(ap->udma_mask || ap->mwdma_mask))
@@ -950,7 +953,7 @@ static void bfin_bmdma_stop(struct ata_queued_cmd *qc)
 			 * data cache is enabled. Otherwise, this loop
 			 * is an empty loop and optimized out.
 			 */
-			ata_for_each_sg(sg, qc) {
+			for_each_sg(qc->sg, sg, qc->n_elem, si) {
 				invalidate_dcache_range(
 					sg_dma_address(sg),
 					sg_dma_address(sg)