summaryrefslogtreecommitdiffstats
path: root/drivers/ata/libata-acpi.c
diff options
context:
space:
mode:
authorTejun Heo <tj@kernel.org>2008-07-06 23:15:03 +0900
committerJeff Garzik <jgarzik@redhat.com>2008-07-11 09:38:23 -0400
commitb344991ace21896a83694c86d132b8494a29f3be (patch)
treef6c7dace53bbd30ad3b79160265b5e470c52f1f2 /drivers/ata/libata-acpi.c
parentf57e91682d141ea50d8c6d42cdc251b6256a3755 (diff)
downloadop-kernel-dev-b344991ace21896a83694c86d132b8494a29f3be.zip
op-kernel-dev-b344991ace21896a83694c86d132b8494a29f3be.tar.gz
libata-acpi: filter out DIPM enable
Some BIOSen enable DIPM via _GTF which causes command timeouts under certain configuration. This didn't occur on 2.6.25 because 2.6.25 defaulted to SRST, so _GTF wasn't executed during boot probe, so ahci host reset disabled DIPM and as _GTF wasn't executed after SRST, DIPM wasn't enabled. On 2.6.26, hardreset is used during probe and after probe _GTF is executed enabling DIPM and thus the failures. This patch could theoretically disable DIPM on machines which used to have it enabled on 2.6.25 but AFAIK ahci is currently the only driver which uses SATA ACPI hierarchy (_SDD) and as the host reset would have always disabled DIPM, this shouldn't happen. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Diffstat (limited to 'drivers/ata/libata-acpi.c')
-rw-r--r--drivers/ata/libata-acpi.c14
1 files changed, 12 insertions, 2 deletions
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index 3ff8b14..abea74b 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -29,14 +29,16 @@
enum {
ATA_ACPI_FILTER_SETXFER = 1 << 0,
ATA_ACPI_FILTER_LOCK = 1 << 1,
+ ATA_ACPI_FILTER_DIPM = 1 << 2,
ATA_ACPI_FILTER_DEFAULT = ATA_ACPI_FILTER_SETXFER |
- ATA_ACPI_FILTER_LOCK,
+ ATA_ACPI_FILTER_LOCK |
+ ATA_ACPI_FILTER_DIPM,
};
static unsigned int ata_acpi_gtf_filter = ATA_ACPI_FILTER_DEFAULT;
module_param_named(acpi_gtf_filter, ata_acpi_gtf_filter, int, 0644);
-MODULE_PARM_DESC(acpi_gtf_filter, "filter mask for ACPI _GTF commands, set to filter out (0x1=set xfermode, 0x2=lock/freeze lock)");
+MODULE_PARM_DESC(acpi_gtf_filter, "filter mask for ACPI _GTF commands, set to filter out (0x1=set xfermode, 0x2=lock/freeze lock, 0x4=DIPM)");
#define NO_PORT_MULT 0xffff
#define SATA_ADR(root, pmp) (((root) << 16) | (pmp))
@@ -690,6 +692,14 @@ static int ata_acpi_filter_tf(const struct ata_taskfile *tf,
return 1;
}
+ if (ata_acpi_gtf_filter & ATA_ACPI_FILTER_DIPM) {
+ /* inhibit enabling DIPM */
+ if (tf->command == ATA_CMD_SET_FEATURES &&
+ tf->feature == SETFEATURES_SATA_ENABLE &&
+ tf->nsect == SATA_DIPM)
+ return 1;
+ }
+
return 0;
}
OpenPOWER on IntegriCloud