summaryrefslogtreecommitdiffstats
path: root/drivers/ata/libahci.c
diff options
context:
space:
mode:
authorShane Huang <shane.huang@amd.com>2012-12-17 23:18:59 +0800
committerJeff Garzik <jgarzik@redhat.com>2013-01-14 13:29:15 -0500
commit803739d25c2343da6d2f95eebdcbc08bf67097d4 (patch)
tree59f3fd6a8285925c79419132b469602f4c36a0bf /drivers/ata/libahci.c
parent7f9c9f8e24590e7dcd26ca408458c43df5b83e61 (diff)
downloadop-kernel-dev-803739d25c2343da6d2f95eebdcbc08bf67097d4.zip
op-kernel-dev-803739d25c2343da6d2f95eebdcbc08bf67097d4.tar.gz
[libata] replace sata_settings with devslp_timing
NCQ capability was used to check availability of SATA Settings page from Identify Device Data Log, which contains DevSlp timing variables. It does not work on some HDDs and leads to error messages. IDENTIFY word 78 bit 5(Hardware Feature Control) can't work either because it is only the sufficient condition of Identify Device data log, not the necessary condition. This patch replaced ata_device->sata_settings with ->devslp_timing to only save DevSlp timing variables(8 bytes), instead of the whole SATA Settings page(512 bytes). Addresses https://bugzilla.kernel.org/show_bug.cgi?id=51881 Reported-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Shane Huang <shane.huang@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Diffstat (limited to 'drivers/ata/libahci.c')
-rw-r--r--drivers/ata/libahci.c6
1 files changed, 3 insertions, 3 deletions
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index 320712a..6cd7805 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -1951,13 +1951,13 @@ static void ahci_set_aggressive_devslp(struct ata_port *ap, bool sleep)
/* Use the nominal value 10 ms if the read MDAT is zero,
* the nominal value of DETO is 20 ms.
*/
- if (dev->sata_settings[ATA_LOG_DEVSLP_VALID] &
+ if (dev->devslp_timing[ATA_LOG_DEVSLP_VALID] &
ATA_LOG_DEVSLP_VALID_MASK) {
- mdat = dev->sata_settings[ATA_LOG_DEVSLP_MDAT] &
+ mdat = dev->devslp_timing[ATA_LOG_DEVSLP_MDAT] &
ATA_LOG_DEVSLP_MDAT_MASK;
if (!mdat)
mdat = 10;
- deto = dev->sata_settings[ATA_LOG_DEVSLP_DETO];
+ deto = dev->devslp_timing[ATA_LOG_DEVSLP_DETO];
if (!deto)
deto = 20;
} else {
OpenPOWER on IntegriCloud