libnvdimm, nfit: handle unarmed dimms, mark namespaces read-only

Upon detection of an unarmed dimm in a region, arrange for descendant
BTT, PMEM, or BLK instances to be read-only.  A dimm is primarily marked
"unarmed" via flags passed by platform firmware (NFIT).

The flags in the NFIT memory device sub-structure indicate the state of
the data on the nvdimm relative to its energy source or last "flush to
persistence".  For the most part there is nothing the driver can do but
advertise the state of these flags in sysfs and emit a message if
firmware indicates that the contents of the device may be corrupted.
However, for the case of ACPI_NFIT_MEM_ARMED, the driver can arrange for
the block devices incorporating that nvdimm to be marked read-only.
This is a safe default as the data is still available and new writes are
held off until the administrator either forces read-write mode, or the
energy source becomes armed.

A 'read_only' attribute is added to REGION devices to allow for
overriding the default read-only policy of all descendant block devices.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>

2 files changed, 34 insertions, 0 deletions

diff --git a/drivers/acpi/nfit.c b/drivers/acpi/nfit.c
index 07d630e9..1f6f1b1 100644
--- a/drivers/acpi/nfit.c
+++ b/drivers/acpi/nfit.c
@@ -668,6 +668,20 @@ static ssize_t serial_show(struct device *dev,
 }
 static DEVICE_ATTR_RO(serial);
 
+static ssize_t flags_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	u16 flags = to_nfit_memdev(dev)->flags;
+
+	return sprintf(buf, "%s%s%s%s%s\n",
+			flags & ACPI_NFIT_MEM_SAVE_FAILED ? "save " : "",
+			flags & ACPI_NFIT_MEM_RESTORE_FAILED ? "restore " : "",
+			flags & ACPI_NFIT_MEM_FLUSH_FAILED ? "flush " : "",
+			flags & ACPI_NFIT_MEM_ARMED ? "arm " : "",
+			flags & ACPI_NFIT_MEM_HEALTH_OBSERVED ? "smart " : "");
+}
+static DEVICE_ATTR_RO(flags);
+
 static struct attribute *acpi_nfit_dimm_attributes[] = {
 	&dev_attr_handle.attr,
 	&dev_attr_phys_id.attr,
@@ -676,6 +690,7 @@ static struct attribute *acpi_nfit_dimm_attributes[] = {
 	&dev_attr_format.attr,
 	&dev_attr_serial.attr,
 	&dev_attr_rev_id.attr,
+	&dev_attr_flags.attr,
 	NULL,
 };
 
@@ -768,6 +783,7 @@ static int acpi_nfit_register_dimms(struct acpi_nfit_desc *acpi_desc)
 		struct nvdimm *nvdimm;
 		unsigned long flags = 0;
 		u32 device_handle;
+		u16 mem_flags;
 		int rc;
 
 		device_handle = __to_nfit_memdev(nfit_mem)->device_handle;
@@ -785,6 +801,10 @@ static int acpi_nfit_register_dimms(struct acpi_nfit_desc *acpi_desc)
 		if (nfit_mem->bdw && nfit_mem->memdev_pmem)
 			flags |= NDD_ALIASING;
 
+		mem_flags = __to_nfit_memdev(nfit_mem)->flags;
+		if (mem_flags & ACPI_NFIT_MEM_ARMED)
+			flags |= NDD_UNARMED;
+
 		rc = acpi_nfit_add_dimm(acpi_desc, nfit_mem, device_handle);
 		if (rc)
 			continue;
@@ -797,6 +817,17 @@ static int acpi_nfit_register_dimms(struct acpi_nfit_desc *acpi_desc)
 
 		nfit_mem->nvdimm = nvdimm;
 		dimm_count++;
+
+		if ((mem_flags & ACPI_NFIT_MEM_FAILED_MASK) == 0)
+			continue;
+
+		dev_info(acpi_desc->dev, "%s: failed: %s%s%s%s\n",
+				nvdimm_name(nvdimm),
+			mem_flags & ACPI_NFIT_MEM_SAVE_FAILED ? "save " : "",
+			mem_flags & ACPI_NFIT_MEM_RESTORE_FAILED ? "restore " : "",
+			mem_flags & ACPI_NFIT_MEM_FLUSH_FAILED ? "flush " : "",
+			mem_flags & ACPI_NFIT_MEM_ARMED ? "arm " : "");
+
 	}
 
 	return nvdimm_bus_check_dimm_count(acpi_desc->nvdimm_bus, dimm_count);
diff --git a/drivers/acpi/nfit.h b/drivers/acpi/nfit.h
index c62fffe..81f2e8c5 100644
--- a/drivers/acpi/nfit.h
+++ b/drivers/acpi/nfit.h
@@ -22,6 +22,9 @@
 
 #define UUID_NFIT_BUS "2f10e7a4-9e91-11e4-89d3-123b93f75cba"
 #define UUID_NFIT_DIMM "4309ac30-0d11-11e4-9191-0800200c9a66"
+#define ACPI_NFIT_MEM_FAILED_MASK (ACPI_NFIT_MEM_SAVE_FAILED \
+		| ACPI_NFIT_MEM_RESTORE_FAILED | ACPI_NFIT_MEM_FLUSH_FAILED \
+		| ACPI_NFIT_MEM_ARMED)
 
 enum nfit_uuids {
 	NFIT_SPA_VOLATILE,