Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

12 files changed, 7265 insertions, 0 deletions

diff --git a/drivers/acpi/resources/Makefile b/drivers/acpi/resources/Makefile
new file mode 100644
index 0000000..2130b74
--- /dev/null
+++ b/drivers/acpi/resources/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for all Linux ACPI interpreter subdirectories
+#
+
+obj-y := rsaddr.o  rscreate.o  rsio.o   rslist.o    rsmisc.o   rsxface.o \
+	 rscalc.o  rsirq.o  rsmemory.o  rsutils.o
+
+obj-$(ACPI_FUTURE_USAGE) += rsdump.o
+
+EXTRA_CFLAGS += $(ACPI_CFLAGS)
diff --git a/drivers/acpi/resources/rsaddr.c b/drivers/acpi/resources/rsaddr.c
new file mode 100644
index 0000000..4788c07
--- /dev/null
+++ b/drivers/acpi/resources/rsaddr.c
@@ -0,0 +1,1225 @@
+/*******************************************************************************
+ *
+ * Module Name: rsaddr - Address resource descriptors (16/32/64)
+ *
+ ******************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#include <acpi/acpi.h>
+#include <acpi/acresrc.h>
+
+#define _COMPONENT          ACPI_RESOURCES
+	 ACPI_MODULE_NAME    ("rsaddr")
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_address16_resource
+ *
+ * PARAMETERS:  byte_stream_buffer      - Pointer to the resource input byte
+ *                                        stream
+ *              bytes_consumed          - Pointer to where the number of bytes
+ *                                        consumed the byte_stream_buffer is
+ *                                        returned
+ *              output_buffer           - Pointer to the return data buffer
+ *              structure_size          - Pointer to where the number of bytes
+ *                                        in the return data struct is returned
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Take the resource byte stream and fill out the appropriate
+ *              structure pointed to by the output_buffer. Return the
+ *              number of bytes consumed from the byte stream.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_rs_address16_resource (
+	u8                              *byte_stream_buffer,
+	acpi_size                       *bytes_consumed,
+	u8                              **output_buffer,
+	acpi_size                       *structure_size)
+{
+	u8                              *buffer = byte_stream_buffer;
+	struct acpi_resource            *output_struct = (void *) *output_buffer;
+	u8                              *temp_ptr;
+	acpi_size                       struct_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_address16);
+	u32                             index;
+	u16                             temp16;
+	u8                              temp8;
+
+
+	ACPI_FUNCTION_TRACE ("rs_address16_resource");
+
+
+	/*
+	 * Point past the Descriptor to get the number of bytes consumed
+	 */
+	buffer += 1;
+	ACPI_MOVE_16_TO_16 (&temp16, buffer);
+
+	/* Validate minimum descriptor length */
+
+	if (temp16 < 13) {
+		return_ACPI_STATUS (AE_AML_BAD_RESOURCE_LENGTH);
+	}
+
+	*bytes_consumed = temp16 + 3;
+	output_struct->id = ACPI_RSTYPE_ADDRESS16;
+
+	/*
+	 * Get the Resource Type (Byte3)
+	 */
+	buffer += 2;
+	temp8 = *buffer;
+
+	/* Values 0-2 and 0xC0-0xFF are valid */
+
+	if ((temp8 > 2) && (temp8 < 0xC0)) {
+		return_ACPI_STATUS (AE_AML_INVALID_RESOURCE_TYPE);
+	}
+
+	output_struct->data.address16.resource_type = temp8;
+
+	/*
+	 * Get the General Flags (Byte4)
+	 */
+	buffer += 1;
+	temp8 = *buffer;
+
+	/* Producer / Consumer */
+
+	output_struct->data.address16.producer_consumer = temp8 & 0x01;
+
+	/* Decode */
+
+	output_struct->data.address16.decode = (temp8 >> 1) & 0x01;
+
+	/* Min Address Fixed */
+
+	output_struct->data.address16.min_address_fixed = (temp8 >> 2) & 0x01;
+
+	/* Max Address Fixed */
+
+	output_struct->data.address16.max_address_fixed = (temp8 >> 3) & 0x01;
+
+	/*
+	 * Get the Type Specific Flags (Byte5)
+	 */
+	buffer += 1;
+	temp8 = *buffer;
+
+	if (ACPI_MEMORY_RANGE == output_struct->data.address16.resource_type) {
+		output_struct->data.address16.attribute.memory.read_write_attribute =
+				(u16) (temp8 & 0x01);
+		output_struct->data.address16.attribute.memory.cache_attribute =
+				(u16) ((temp8 >> 1) & 0x03);
+	}
+	else {
+		if (ACPI_IO_RANGE == output_struct->data.address16.resource_type) {
+			output_struct->data.address16.attribute.io.range_attribute =
+				(u16) (temp8 & 0x03);
+			output_struct->data.address16.attribute.io.translation_attribute =
+				(u16) ((temp8 >> 4) & 0x03);
+		}
+		else {
+			/* BUS_NUMBER_RANGE == Address16.Data->resource_type */
+			/* Nothing needs to be filled in */
+		}
+	}
+
+	/*
+	 * Get Granularity (Bytes 6-7)
+	 */
+	buffer += 1;
+	ACPI_MOVE_16_TO_32 (&output_struct->data.address16.granularity, buffer);
+
+	/*
+	 * Get min_address_range (Bytes 8-9)
+	 */
+	buffer += 2;
+	ACPI_MOVE_16_TO_32 (&output_struct->data.address16.min_address_range, buffer);
+
+	/*
+	 * Get max_address_range (Bytes 10-11)
+	 */
+	buffer += 2;
+	ACPI_MOVE_16_TO_32 (&output_struct->data.address16.max_address_range, buffer);
+
+	/*
+	 * Get address_translation_offset (Bytes 12-13)
+	 */
+	buffer += 2;
+	ACPI_MOVE_16_TO_32 (&output_struct->data.address16.address_translation_offset, buffer);
+
+	/*
+	 * Get address_length (Bytes 14-15)
+	 */
+	buffer += 2;
+	ACPI_MOVE_16_TO_32 (&output_struct->data.address16.address_length, buffer);
+
+	/*
+	 * Resource Source Index (if present)
+	 */
+	buffer += 2;
+
+	/*
+	 * This will leave us pointing to the Resource Source Index
+	 * If it is present, then save it off and calculate the
+	 * pointer to where the null terminated string goes:
+	 * Each Interrupt takes 32-bits + the 5 bytes of the
+	 * stream that are default.
+	 *
+	 * Note: Some resource descriptors will have an additional null, so
+	 * we add 1 to the length.
+	 */
+	if (*bytes_consumed > (16 + 1)) {
+		/* Dereference the Index */
+
+		temp8 = *buffer;
+		output_struct->data.address16.resource_source.index = (u32) temp8;
+
+		/* Point to the String */
+
+		buffer += 1;
+
+		/* Point the String pointer to the end of this structure */
+
+		output_struct->data.address16.resource_source.string_ptr =
+				(char *)((u8 * )output_struct + struct_size);
+
+		temp_ptr = (u8 *) output_struct->data.address16.resource_source.string_ptr;
+
+		/* Copy the string into the buffer */
+
+		index = 0;
+
+		while (0x00 != *buffer) {
+			*temp_ptr = *buffer;
+
+			temp_ptr += 1;
+			buffer += 1;
+			index += 1;
+		}
+
+		/*
+		 * Add the terminating null
+		 */
+		*temp_ptr = 0x00;
+
+		output_struct->data.address16.resource_source.string_length = index + 1;
+
+		/*
+		 * In order for the struct_size to fall on a 32-bit boundary,
+		 * calculate the length of the string and expand the
+		 * struct_size to the next 32-bit boundary.
+		 */
+		temp8 = (u8) (index + 1);
+		struct_size += ACPI_ROUND_UP_to_32_bITS (temp8);
+	}
+	else {
+		output_struct->data.address16.resource_source.index = 0x00;
+		output_struct->data.address16.resource_source.string_length = 0;
+		output_struct->data.address16.resource_source.string_ptr = NULL;
+	}
+
+	/*
+	 * Set the Length parameter
+	 */
+	output_struct->length = (u32) struct_size;
+
+	/*
+	 * Return the final size of the structure
+	 */
+	*structure_size = struct_size;
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_address16_stream
+ *
+ * PARAMETERS:  linked_list             - Pointer to the resource linked list
+ *              output_buffer           - Pointer to the user's return buffer
+ *              bytes_consumed          - Pointer to where the number of bytes
+ *                                        used in the output_buffer is returned
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Take the linked list resource structure and fills in the
+ *              the appropriate bytes in a byte stream
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_rs_address16_stream (
+	struct acpi_resource            *linked_list,
+	u8                              **output_buffer,
+	acpi_size                       *bytes_consumed)
+{
+	u8                              *buffer = *output_buffer;
+	u8                              *length_field;
+	u8                              temp8;
+	char                            *temp_pointer = NULL;
+	acpi_size                       actual_bytes;
+
+
+	ACPI_FUNCTION_TRACE ("rs_address16_stream");
+
+
+	/*
+	 * The descriptor field is static
+	 */
+	*buffer = 0x88;
+	buffer += 1;
+
+	/*
+	 * Save a pointer to the Length field - to be filled in later
+	 */
+	length_field = buffer;
+	buffer += 2;
+
+	/*
+	 * Set the Resource Type (Memory, Io, bus_number)
+	 */
+	temp8 = (u8) (linked_list->data.address16.resource_type & 0x03);
+	*buffer = temp8;
+	buffer += 1;
+
+	/*
+	 * Set the general flags
+	 */
+	temp8 = (u8) (linked_list->data.address16.producer_consumer & 0x01);
+
+	temp8 |= (linked_list->data.address16.decode & 0x01) << 1;
+	temp8 |= (linked_list->data.address16.min_address_fixed & 0x01) << 2;
+	temp8 |= (linked_list->data.address16.max_address_fixed & 0x01) << 3;
+
+	*buffer = temp8;
+	buffer += 1;
+
+	/*
+	 * Set the type specific flags
+	 */
+	temp8 = 0;
+
+	if (ACPI_MEMORY_RANGE == linked_list->data.address16.resource_type) {
+		temp8 = (u8)
+			(linked_list->data.address16.attribute.memory.read_write_attribute &
+			 0x01);
+
+		temp8 |=
+			(linked_list->data.address16.attribute.memory.cache_attribute &
+			 0x03) << 1;
+	}
+	else if (ACPI_IO_RANGE == linked_list->data.address16.resource_type) {
+		temp8 = (u8)
+			(linked_list->data.address16.attribute.io.range_attribute &
+			 0x03);
+		temp8 |=
+			(linked_list->data.address16.attribute.io.translation_attribute &
+			 0x03) << 4;
+	}
+
+	*buffer = temp8;
+	buffer += 1;
+
+	/*
+	 * Set the address space granularity
+	 */
+	ACPI_MOVE_32_TO_16 (buffer, &linked_list->data.address16.granularity);
+	buffer += 2;
+
+	/*
+	 * Set the address range minimum
+	 */
+	ACPI_MOVE_32_TO_16 (buffer, &linked_list->data.address16.min_address_range);
+	buffer += 2;
+
+	/*
+	 * Set the address range maximum
+	 */
+	ACPI_MOVE_32_TO_16 (buffer, &linked_list->data.address16.max_address_range);
+	buffer += 2;
+
+	/*
+	 * Set the address translation offset
+	 */
+	ACPI_MOVE_32_TO_16 (buffer, &linked_list->data.address16.address_translation_offset);
+	buffer += 2;
+
+	/*
+	 * Set the address length
+	 */
+	ACPI_MOVE_32_TO_16 (buffer, &linked_list->data.address16.address_length);
+	buffer += 2;
+
+	/*
+	 * Resource Source Index and Resource Source are optional
+	 */
+	if (0 != linked_list->data.address16.resource_source.string_length) {
+		temp8 = (u8) linked_list->data.address16.resource_source.index;
+
+		*buffer = temp8;
+		buffer += 1;
+
+		temp_pointer = (char *) buffer;
+
+		/*
+		 * Copy the string
+		 */
+		ACPI_STRCPY (temp_pointer,
+				linked_list->data.address16.resource_source.string_ptr);
+
+		/*
+		 * Buffer needs to be set to the length of the sting + one for the
+		 * terminating null
+		 */
+		buffer += (acpi_size)(ACPI_STRLEN (linked_list->data.address16.resource_source.string_ptr) + 1);
+	}
+
+	/*
+	 * Return the number of bytes consumed in this operation
+	 */
+	actual_bytes = ACPI_PTR_DIFF (buffer, *output_buffer);
+	*bytes_consumed = actual_bytes;
+
+	/*
+	 * Set the length field to the number of bytes consumed
+	 * minus the header size (3 bytes)
+	 */
+	actual_bytes -= 3;
+	ACPI_MOVE_SIZE_TO_16 (length_field, &actual_bytes);
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_address32_resource
+ *
+ * PARAMETERS:  byte_stream_buffer      - Pointer to the resource input byte
+ *                                        stream
+ *              bytes_consumed          - Pointer to where the number of bytes
+ *                                        consumed the byte_stream_buffer is
+ *                                        returned
+ *              output_buffer           - Pointer to the return data buffer
+ *              structure_size          - Pointer to where the number of bytes
+ *                                        in the return data struct is returned
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Take the resource byte stream and fill out the appropriate
+ *              structure pointed to by the output_buffer. Return the
+ *              number of bytes consumed from the byte stream.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_rs_address32_resource (
+	u8                              *byte_stream_buffer,
+	acpi_size                       *bytes_consumed,
+	u8                              **output_buffer,
+	acpi_size                       *structure_size)
+{
+	u8                              *buffer;
+	struct acpi_resource            *output_struct= (void *) *output_buffer;
+	u16                             temp16;
+	u8                              temp8;
+	u8                              *temp_ptr;
+	acpi_size                       struct_size;
+	u32                             index;
+
+
+	ACPI_FUNCTION_TRACE ("rs_address32_resource");
+
+
+	buffer = byte_stream_buffer;
+	struct_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_address32);
+
+	/*
+	 * Point past the Descriptor to get the number of bytes consumed
+	 */
+	buffer += 1;
+	ACPI_MOVE_16_TO_16 (&temp16, buffer);
+
+	/* Validate minimum descriptor length */
+
+	if (temp16 < 23) {
+		return_ACPI_STATUS (AE_AML_BAD_RESOURCE_LENGTH);
+	}
+
+	*bytes_consumed = temp16 + 3;
+	output_struct->id = ACPI_RSTYPE_ADDRESS32;
+
+	/*
+	 * Get the Resource Type (Byte3)
+	 */
+	buffer += 2;
+	temp8 = *buffer;
+
+	/* Values 0-2 and 0xC0-0xFF are valid */
+
+	if ((temp8 > 2) && (temp8 < 0xC0)) {
+		return_ACPI_STATUS (AE_AML_INVALID_RESOURCE_TYPE);
+	}
+
+	output_struct->data.address32.resource_type = temp8;
+
+	/*
+	 * Get the General Flags (Byte4)
+	 */
+	buffer += 1;
+	temp8 = *buffer;
+
+	/*
+	 * Producer / Consumer
+	 */
+	output_struct->data.address32.producer_consumer = temp8 & 0x01;
+
+	/*
+	 * Decode
+	 */
+	output_struct->data.address32.decode = (temp8 >> 1) & 0x01;
+
+	/*
+	 * Min Address Fixed
+	 */
+	output_struct->data.address32.min_address_fixed = (temp8 >> 2) & 0x01;
+
+	/*
+	 * Max Address Fixed
+	 */
+	output_struct->data.address32.max_address_fixed = (temp8 >> 3) & 0x01;
+
+	/*
+	 * Get the Type Specific Flags (Byte5)
+	 */
+	buffer += 1;
+	temp8 = *buffer;
+
+	if (ACPI_MEMORY_RANGE == output_struct->data.address32.resource_type) {
+		output_struct->data.address32.attribute.memory.read_write_attribute =
+				(u16) (temp8 & 0x01);
+
+		output_struct->data.address32.attribute.memory.cache_attribute =
+				(u16) ((temp8 >> 1) & 0x03);
+	}
+	else {
+		if (ACPI_IO_RANGE == output_struct->data.address32.resource_type) {
+			output_struct->data.address32.attribute.io.range_attribute =
+				(u16) (temp8 & 0x03);
+			output_struct->data.address32.attribute.io.translation_attribute =
+				(u16) ((temp8 >> 4) & 0x03);
+		}
+		else {
+			/* BUS_NUMBER_RANGE == output_struct->Data.Address32.resource_type */
+			/* Nothing needs to be filled in */
+		}
+	}
+
+	/*
+	 * Get Granularity (Bytes 6-9)
+	 */
+	buffer += 1;
+	ACPI_MOVE_32_TO_32 (&output_struct->data.address32.granularity, buffer);
+
+	/*
+	 * Get min_address_range (Bytes 10-13)
+	 */
+	buffer += 4;
+	ACPI_MOVE_32_TO_32 (&output_struct->data.address32.min_address_range, buffer);
+
+	/*
+	 * Get max_address_range (Bytes 14-17)
+	 */
+	buffer += 4;
+	ACPI_MOVE_32_TO_32 (&output_struct->data.address32.max_address_range, buffer);
+
+	/*
+	 * Get address_translation_offset (Bytes 18-21)
+	 */
+	buffer += 4;
+	ACPI_MOVE_32_TO_32 (&output_struct->data.address32.address_translation_offset, buffer);
+
+	/*
+	 * Get address_length (Bytes 22-25)
+	 */
+	buffer += 4;
+	ACPI_MOVE_32_TO_32 (&output_struct->data.address32.address_length, buffer);
+
+	/*
+	 * Resource Source Index (if present)
+	 */
+	buffer += 4;
+
+	/*
+	 * This will leave us pointing to the Resource Source Index
+	 * If it is present, then save it off and calculate the
+	 * pointer to where the null terminated string goes:
+	 *
+	 * Note: Some resource descriptors will have an additional null, so
+	 * we add 1 to the length.
+	 */
+	if (*bytes_consumed > (26 + 1)) {
+		/* Dereference the Index */
+
+		temp8 = *buffer;
+		output_struct->data.address32.resource_source.index =
+				(u32) temp8;
+
+		/* Point to the String */
+
+		buffer += 1;
+
+		/* Point the String pointer to the end of this structure */
+
+		output_struct->data.address32.resource_source.string_ptr =
+				(char *)((u8 *)output_struct + struct_size);
+
+		temp_ptr = (u8 *) output_struct->data.address32.resource_source.string_ptr;
+
+		/* Copy the string into the buffer */
+
+		index = 0;
+		while (0x00 != *buffer) {
+			*temp_ptr = *buffer;
+
+			temp_ptr += 1;
+			buffer += 1;
+			index += 1;
+		}
+
+		/*
+		 * Add the terminating null
+		 */
+		*temp_ptr = 0x00;
+		output_struct->data.address32.resource_source.string_length = index + 1;
+
+		/*
+		 * In order for the struct_size to fall on a 32-bit boundary,
+		 * calculate the length of the string and expand the
+		 * struct_size to the next 32-bit boundary.
+		 */
+		temp8 = (u8) (index + 1);
+		struct_size += ACPI_ROUND_UP_to_32_bITS (temp8);
+	}
+	else {
+		output_struct->data.address32.resource_source.index = 0x00;
+		output_struct->data.address32.resource_source.string_length = 0;
+		output_struct->data.address32.resource_source.string_ptr = NULL;
+	}
+
+	/*
+	 * Set the Length parameter
+	 */
+	output_struct->length = (u32) struct_size;
+
+	/*
+	 * Return the final size of the structure
+	 */
+	*structure_size = struct_size;
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_address32_stream
+ *
+ * PARAMETERS:  linked_list             - Pointer to the resource linked list
+ *              output_buffer           - Pointer to the user's return buffer
+ *              bytes_consumed          - Pointer to where the number of bytes
+ *                                        used in the output_buffer is returned
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Take the linked list resource structure and fills in the
+ *              the appropriate bytes in a byte stream
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_rs_address32_stream (
+	struct acpi_resource            *linked_list,
+	u8                              **output_buffer,
+	acpi_size                       *bytes_consumed)
+{
+	u8                              *buffer;
+	u16                             *length_field;
+	u8                              temp8;
+	char                            *temp_pointer;
+
+
+	ACPI_FUNCTION_TRACE ("rs_address32_stream");
+
+
+	buffer = *output_buffer;
+
+	/*
+	 * The descriptor field is static
+	 */
+	*buffer = 0x87;
+	buffer += 1;
+
+	/*
+	 * Set a pointer to the Length field - to be filled in later
+	 */
+	length_field = ACPI_CAST_PTR (u16, buffer);
+	buffer += 2;
+
+	/*
+	 * Set the Resource Type (Memory, Io, bus_number)
+	 */
+	temp8 = (u8) (linked_list->data.address32.resource_type & 0x03);
+
+	*buffer = temp8;
+	buffer += 1;
+
+	/*
+	 * Set the general flags
+	 */
+	temp8 = (u8) (linked_list->data.address32.producer_consumer & 0x01);
+	temp8 |= (linked_list->data.address32.decode & 0x01) << 1;
+	temp8 |= (linked_list->data.address32.min_address_fixed & 0x01) << 2;
+	temp8 |= (linked_list->data.address32.max_address_fixed & 0x01) << 3;
+
+	*buffer = temp8;
+	buffer += 1;
+
+	/*
+	 * Set the type specific flags
+	 */
+	temp8 = 0;
+
+	if (ACPI_MEMORY_RANGE == linked_list->data.address32.resource_type) {
+		temp8 = (u8)
+			(linked_list->data.address32.attribute.memory.read_write_attribute &
+			0x01);
+
+		temp8 |=
+			(linked_list->data.address32.attribute.memory.cache_attribute &
+			 0x03) << 1;
+	}
+	else if (ACPI_IO_RANGE == linked_list->data.address32.resource_type) {
+		temp8 = (u8)
+			(linked_list->data.address32.attribute.io.range_attribute &
+			 0x03);
+		temp8 |=
+			(linked_list->data.address32.attribute.io.translation_attribute &
+			 0x03) << 4;
+	}
+
+	*buffer = temp8;
+	buffer += 1;
+
+	/*
+	 * Set the address space granularity
+	 */
+	ACPI_MOVE_32_TO_32 (buffer, &linked_list->data.address32.granularity);
+	buffer += 4;
+
+	/*
+	 * Set the address range minimum
+	 */
+	ACPI_MOVE_32_TO_32 (buffer, &linked_list->data.address32.min_address_range);
+	buffer += 4;
+
+	/*
+	 * Set the address range maximum
+	 */
+	ACPI_MOVE_32_TO_32 (buffer, &linked_list->data.address32.max_address_range);
+	buffer += 4;
+
+	/*
+	 * Set the address translation offset
+	 */
+	ACPI_MOVE_32_TO_32 (buffer, &linked_list->data.address32.address_translation_offset);
+	buffer += 4;
+
+	/*
+	 * Set the address length
+	 */
+	ACPI_MOVE_32_TO_32 (buffer, &linked_list->data.address32.address_length);
+	buffer += 4;
+
+	/*
+	 * Resource Source Index and Resource Source are optional
+	 */
+	if (0 != linked_list->data.address32.resource_source.string_length) {
+		temp8 = (u8) linked_list->data.address32.resource_source.index;
+
+		*buffer = temp8;
+		buffer += 1;
+
+		temp_pointer = (char *) buffer;
+
+		/*
+		 * Copy the string
+		 */
+		ACPI_STRCPY (temp_pointer,
+			linked_list->data.address32.resource_source.string_ptr);
+
+		/*
+		 * Buffer needs to be set to the length of the sting + one for the
+		 *  terminating null
+		 */
+		buffer += (acpi_size)(ACPI_STRLEN (linked_list->data.address32.resource_source.string_ptr) + 1);
+	}
+
+	/*
+	 * Return the number of bytes consumed in this operation
+	 */
+	*bytes_consumed = ACPI_PTR_DIFF (buffer, *output_buffer);
+
+	/*
+	 * Set the length field to the number of bytes consumed
+	 *  minus the header size (3 bytes)
+	 */
+	*length_field = (u16) (*bytes_consumed - 3);
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_address64_resource
+ *
+ * PARAMETERS:  byte_stream_buffer      - Pointer to the resource input byte
+ *                                        stream
+ *              bytes_consumed          - Pointer to where the number of bytes
+ *                                        consumed the byte_stream_buffer is
+ *                                        returned
+ *              output_buffer           - Pointer to the return data buffer
+ *              structure_size          - Pointer to where the number of bytes
+ *                                        in the return data struct is returned
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Take the resource byte stream and fill out the appropriate
+ *              structure pointed to by the output_buffer. Return the
+ *              number of bytes consumed from the byte stream.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_rs_address64_resource (
+	u8                              *byte_stream_buffer,
+	acpi_size                       *bytes_consumed,
+	u8                              **output_buffer,
+	acpi_size                       *structure_size)
+{
+	u8                              *buffer;
+	struct acpi_resource            *output_struct = (void *) *output_buffer;
+	u16                             temp16;
+	u8                              temp8;
+	u8                              resource_type;
+	u8                              *temp_ptr;
+	acpi_size                       struct_size;
+	u32                             index;
+
+
+	ACPI_FUNCTION_TRACE ("rs_address64_resource");
+
+
+	buffer = byte_stream_buffer;
+	struct_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_address64);
+	resource_type = *buffer;
+
+	/*
+	 * Point past the Descriptor to get the number of bytes consumed
+	 */
+	buffer += 1;
+	ACPI_MOVE_16_TO_16 (&temp16, buffer);
+
+	/* Validate minimum descriptor length */
+
+	if (temp16 < 43) {
+		return_ACPI_STATUS (AE_AML_BAD_RESOURCE_LENGTH);
+	}
+
+	*bytes_consumed = temp16 + 3;
+	output_struct->id = ACPI_RSTYPE_ADDRESS64;
+
+	/*
+	 * Get the Resource Type (Byte3)
+	 */
+	buffer += 2;
+	temp8 = *buffer;
+
+	/* Values 0-2 and 0xC0-0xFF are valid */
+
+	if ((temp8 > 2) && (temp8 < 0xC0)) {
+		return_ACPI_STATUS (AE_AML_INVALID_RESOURCE_TYPE);
+	}
+
+	output_struct->data.address64.resource_type = temp8;
+
+	/*
+	 * Get the General Flags (Byte4)
+	 */
+	buffer += 1;
+	temp8 = *buffer;
+
+	/*
+	 * Producer / Consumer
+	 */
+	output_struct->data.address64.producer_consumer = temp8 & 0x01;
+
+	/*
+	 * Decode
+	 */
+	output_struct->data.address64.decode = (temp8 >> 1) & 0x01;
+
+	/*
+	 * Min Address Fixed
+	 */
+	output_struct->data.address64.min_address_fixed = (temp8 >> 2) & 0x01;
+
+	/*
+	 * Max Address Fixed
+	 */
+	output_struct->data.address64.max_address_fixed = (temp8 >> 3) & 0x01;
+
+	/*
+	 * Get the Type Specific Flags (Byte5)
+	 */
+	buffer += 1;
+	temp8 = *buffer;
+
+	if (ACPI_MEMORY_RANGE == output_struct->data.address64.resource_type) {
+		output_struct->data.address64.attribute.memory.read_write_attribute =
+				(u16) (temp8 & 0x01);
+
+		output_struct->data.address64.attribute.memory.cache_attribute =
+				(u16) ((temp8 >> 1) & 0x03);
+	}
+	else {
+		if (ACPI_IO_RANGE == output_struct->data.address64.resource_type) {
+			output_struct->data.address64.attribute.io.range_attribute =
+				(u16) (temp8 & 0x03);
+			output_struct->data.address64.attribute.io.translation_attribute =
+				(u16) ((temp8 >> 4) & 0x03);
+		}
+		else {
+			/* BUS_NUMBER_RANGE == output_struct->Data.Address64.resource_type */
+			/* Nothing needs to be filled in */
+		}
+	}
+
+	if (resource_type == ACPI_RDESC_TYPE_EXTENDED_ADDRESS_SPACE) {
+		/* Move past revision_id and Reserved byte */
+
+		buffer += 2;
+	}
+
+	/*
+	 * Get Granularity (Bytes 6-13) or (Bytes 8-15)
+	 */
+	buffer += 1;
+	ACPI_MOVE_64_TO_64 (&output_struct->data.address64.granularity, buffer);
+
+	/*
+	 * Get min_address_range (Bytes 14-21) or (Bytes 16-23)
+	 */
+	buffer += 8;
+	ACPI_MOVE_64_TO_64 (&output_struct->data.address64.min_address_range, buffer);
+
+	/*
+	 * Get max_address_range (Bytes 22-29) or (Bytes 24-31)
+	 */
+	buffer += 8;
+	ACPI_MOVE_64_TO_64 (&output_struct->data.address64.max_address_range, buffer);
+
+	/*
+	 * Get address_translation_offset (Bytes 30-37) or (Bytes 32-39)
+	 */
+	buffer += 8;
+	ACPI_MOVE_64_TO_64 (&output_struct->data.address64.address_translation_offset, buffer);
+
+	/*
+	 * Get address_length (Bytes 38-45) or (Bytes 40-47)
+	 */
+	buffer += 8;
+	ACPI_MOVE_64_TO_64 (&output_struct->data.address64.address_length, buffer);
+
+	output_struct->data.address64.resource_source.index = 0x00;
+	output_struct->data.address64.resource_source.string_length = 0;
+	output_struct->data.address64.resource_source.string_ptr = NULL;
+
+	if (resource_type == ACPI_RDESC_TYPE_EXTENDED_ADDRESS_SPACE) {
+		/* Get type_specific_attribute (Bytes 48-55) */
+
+		buffer += 8;
+		ACPI_MOVE_64_TO_64 (&output_struct->data.address64.type_specific_attributes, buffer);
+	}
+	else {
+		output_struct->data.address64.type_specific_attributes = 0;
+
+		/*
+		 * Resource Source Index (if present)
+		 */
+		buffer += 8;
+
+		/*
+		 * This will leave us pointing to the Resource Source Index
+		 * If it is present, then save it off and calculate the
+		 * pointer to where the null terminated string goes:
+		 * Each Interrupt takes 32-bits + the 5 bytes of the
+		 * stream that are default.
+		 *
+		 * Note: Some resource descriptors will have an additional null, so
+		 * we add 1 to the length.
+		 */
+		if (*bytes_consumed > (46 + 1)) {
+			/* Dereference the Index */
+
+			temp8 = *buffer;
+			output_struct->data.address64.resource_source.index =
+					(u32) temp8;
+
+			/* Point to the String */
+
+			buffer += 1;
+
+			/* Point the String pointer to the end of this structure */
+
+			output_struct->data.address64.resource_source.string_ptr =
+					(char *)((u8 *)output_struct + struct_size);
+
+			temp_ptr = (u8 *) output_struct->data.address64.resource_source.string_ptr;
+
+			/* Copy the string into the buffer */
+
+			index = 0;
+			while (0x00 != *buffer) {
+				*temp_ptr = *buffer;
+
+				temp_ptr += 1;
+				buffer += 1;
+				index += 1;
+			}
+
+			/*
+			 * Add the terminating null
+			 */
+			*temp_ptr = 0x00;
+			output_struct->data.address64.resource_source.string_length = index + 1;
+
+			/*
+			 * In order for the struct_size to fall on a 32-bit boundary,
+			 * calculate the length of the string and expand the
+			 * struct_size to the next 32-bit boundary.
+			 */
+			temp8 = (u8) (index + 1);
+			struct_size += ACPI_ROUND_UP_to_32_bITS (temp8);
+		}
+	}
+
+	/*
+	 * Set the Length parameter
+	 */
+	output_struct->length = (u32) struct_size;
+
+	/*
+	 * Return the final size of the structure
+	 */
+	*structure_size = struct_size;
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_address64_stream
+ *
+ * PARAMETERS:  linked_list             - Pointer to the resource linked list
+ *              output_buffer           - Pointer to the user's return buffer
+ *              bytes_consumed          - Pointer to where the number of bytes
+ *                                        used in the output_buffer is returned
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Take the linked list resource structure and fills in the
+ *              the appropriate bytes in a byte stream
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_rs_address64_stream (
+	struct acpi_resource            *linked_list,
+	u8                              **output_buffer,
+	acpi_size                       *bytes_consumed)
+{
+	u8                              *buffer;
+	u16                             *length_field;
+	u8                              temp8;
+	char                            *temp_pointer;
+
+
+	ACPI_FUNCTION_TRACE ("rs_address64_stream");
+
+
+	buffer = *output_buffer;
+
+	/*
+	 * The descriptor field is static
+	 */
+	*buffer = 0x8A;
+	buffer += 1;
+
+	/*
+	 * Set a pointer to the Length field - to be filled in later
+	 */
+	length_field = ACPI_CAST_PTR (u16, buffer);
+	buffer += 2;
+
+	/*
+	 * Set the Resource Type (Memory, Io, bus_number)
+	 */
+	temp8 = (u8) (linked_list->data.address64.resource_type & 0x03);
+
+	*buffer = temp8;
+	buffer += 1;
+
+	/*
+	 * Set the general flags
+	 */
+	temp8 = (u8) (linked_list->data.address64.producer_consumer & 0x01);
+	temp8 |= (linked_list->data.address64.decode & 0x01) << 1;
+	temp8 |= (linked_list->data.address64.min_address_fixed & 0x01) << 2;
+	temp8 |= (linked_list->data.address64.max_address_fixed & 0x01) << 3;
+
+	*buffer = temp8;
+	buffer += 1;
+
+	/*
+	 * Set the type specific flags
+	 */
+	temp8 = 0;
+
+	if (ACPI_MEMORY_RANGE == linked_list->data.address64.resource_type) {
+		temp8 = (u8)
+			(linked_list->data.address64.attribute.memory.read_write_attribute &
+			0x01);
+
+		temp8 |=
+			(linked_list->data.address64.attribute.memory.cache_attribute &
+			 0x03) << 1;
+	}
+	else if (ACPI_IO_RANGE == linked_list->data.address64.resource_type) {
+		temp8 = (u8)
+			(linked_list->data.address64.attribute.io.range_attribute &
+			 0x03);
+		temp8 |=
+			(linked_list->data.address64.attribute.io.range_attribute &
+			 0x03) << 4;
+	}
+
+	*buffer = temp8;
+	buffer += 1;
+
+	/*
+	 * Set the address space granularity
+	 */
+	ACPI_MOVE_64_TO_64 (buffer, &linked_list->data.address64.granularity);
+	buffer += 8;
+
+	/*
+	 * Set the address range minimum
+	 */
+	ACPI_MOVE_64_TO_64 (buffer, &linked_list->data.address64.min_address_range);
+	buffer += 8;
+
+	/*
+	 * Set the address range maximum
+	 */
+	ACPI_MOVE_64_TO_64 (buffer, &linked_list->data.address64.max_address_range);
+	buffer += 8;
+
+	/*
+	 * Set the address translation offset
+	 */
+	ACPI_MOVE_64_TO_64 (buffer, &linked_list->data.address64.address_translation_offset);
+	buffer += 8;
+
+	/*
+	 * Set the address length
+	 */
+	ACPI_MOVE_64_TO_64 (buffer, &linked_list->data.address64.address_length);
+	buffer += 8;
+
+	/*
+	 * Resource Source Index and Resource Source are optional
+	 */
+	if (0 != linked_list->data.address64.resource_source.string_length) {
+		temp8 = (u8) linked_list->data.address64.resource_source.index;
+
+		*buffer = temp8;
+		buffer += 1;
+
+		temp_pointer = (char *) buffer;
+
+		/*
+		 * Copy the string
+		 */
+		ACPI_STRCPY (temp_pointer, linked_list->data.address64.resource_source.string_ptr);
+
+		/*
+		 * Buffer needs to be set to the length of the sting + one for the
+		 * terminating null
+		 */
+		buffer += (acpi_size)(ACPI_STRLEN (linked_list->data.address64.resource_source.string_ptr) + 1);
+	}
+
+	/*
+	 * Return the number of bytes consumed in this operation
+	 */
+	*bytes_consumed = ACPI_PTR_DIFF (buffer, *output_buffer);
+
+	/*
+	 * Set the length field to the number of bytes consumed
+	 * minus the header size (3 bytes)
+	 */
+	*length_field = (u16) (*bytes_consumed - 3);
+	return_ACPI_STATUS (AE_OK);
+}
+
diff --git a/drivers/acpi/resources/rscalc.c b/drivers/acpi/resources/rscalc.c
new file mode 100644
index 0000000..8a5f0a5
--- /dev/null
+++ b/drivers/acpi/resources/rscalc.c
@@ -0,0 +1,841 @@
+/*******************************************************************************
+ *
+ * Module Name: rscalc - Calculate stream and list lengths
+ *
+ ******************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#include <acpi/acpi.h>
+#include <acpi/acresrc.h>
+#include <acpi/amlcode.h>
+#include <acpi/acnamesp.h>
+
+#define _COMPONENT          ACPI_RESOURCES
+	 ACPI_MODULE_NAME    ("rscalc")
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_get_byte_stream_length
+ *
+ * PARAMETERS:  linked_list         - Pointer to the resource linked list
+ *              size_needed         - u32 pointer of the size buffer needed
+ *                                    to properly return the parsed data
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Takes the resource byte stream and parses it once, calculating
+ *              the size buffer needed to hold the linked list that conveys
+ *              the resource data.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_rs_get_byte_stream_length (
+	struct acpi_resource            *linked_list,
+	acpi_size                       *size_needed)
+{
+	acpi_size                       byte_stream_size_needed = 0;
+	acpi_size                       segment_size;
+	u8                              done = FALSE;
+
+
+	ACPI_FUNCTION_TRACE ("rs_get_byte_stream_length");
+
+
+	while (!done) {
+		/*
+		 * Init the variable that will hold the size to add to the total.
+		 */
+		segment_size = 0;
+
+		switch (linked_list->id) {
+		case ACPI_RSTYPE_IRQ:
+			/*
+			 * IRQ Resource
+			 * For an IRQ Resource, Byte 3, although optional, will always be
+			 * created - it holds IRQ information.
+			 */
+			segment_size = 4;
+			break;
+
+		case ACPI_RSTYPE_DMA:
+			/*
+			 * DMA Resource
+			 * For this resource the size is static
+			 */
+			segment_size = 3;
+			break;
+
+		case ACPI_RSTYPE_START_DPF:
+			/*
+			 * Start Dependent Functions Resource
+			 * For a start_dependent_functions Resource, Byte 1, although
+			 * optional, will always be created.
+			 */
+			segment_size = 2;
+			break;
+
+		case ACPI_RSTYPE_END_DPF:
+			/*
+			 * End Dependent Functions Resource
+			 * For this resource the size is static
+			 */
+			segment_size = 1;
+			break;
+
+		case ACPI_RSTYPE_IO:
+			/*
+			 * IO Port Resource
+			 * For this resource the size is static
+			 */
+			segment_size = 8;
+			break;
+
+		case ACPI_RSTYPE_FIXED_IO:
+			/*
+			 * Fixed IO Port Resource
+			 * For this resource the size is static
+			 */
+			segment_size = 4;
+			break;
+
+		case ACPI_RSTYPE_VENDOR:
+			/*
+			 * Vendor Defined Resource
+			 * For a Vendor Specific resource, if the Length is between 1 and 7
+			 * it will be created as a Small Resource data type, otherwise it
+			 * is a Large Resource data type.
+			 */
+			if (linked_list->data.vendor_specific.length > 7) {
+				segment_size = 3;
+			}
+			else {
+				segment_size = 1;
+			}
+			segment_size += linked_list->data.vendor_specific.length;
+			break;
+
+		case ACPI_RSTYPE_END_TAG:
+			/*
+			 * End Tag
+			 * For this resource the size is static
+			 */
+			segment_size = 2;
+			done = TRUE;
+			break;
+
+		case ACPI_RSTYPE_MEM24:
+			/*
+			 * 24-Bit Memory Resource
+			 * For this resource the size is static
+			 */
+			segment_size = 12;
+			break;
+
+		case ACPI_RSTYPE_MEM32:
+			/*
+			 * 32-Bit Memory Range Resource
+			 * For this resource the size is static
+			 */
+			segment_size = 20;
+			break;
+
+		case ACPI_RSTYPE_FIXED_MEM32:
+			/*
+			 * 32-Bit Fixed Memory Resource
+			 * For this resource the size is static
+			 */
+			segment_size = 12;
+			break;
+
+		case ACPI_RSTYPE_ADDRESS16:
+			/*
+			 * 16-Bit Address Resource
+			 * The base size of this byte stream is 16. If a Resource Source
+			 * string is not NULL, add 1 for the Index + the length of the null
+			 * terminated string Resource Source + 1 for the null.
+			 */
+			segment_size = 16;
+
+			if (linked_list->data.address16.resource_source.string_ptr) {
+				segment_size += linked_list->data.address16.resource_source.string_length;
+				segment_size++;
+			}
+			break;
+
+		case ACPI_RSTYPE_ADDRESS32:
+			/*
+			 * 32-Bit Address Resource
+			 * The base size of this byte stream is 26. If a Resource
+			 * Source string is not NULL, add 1 for the Index + the
+			 * length of the null terminated string Resource Source +
+			 * 1 for the null.
+			 */
+			segment_size = 26;
+
+			if (linked_list->data.address32.resource_source.string_ptr) {
+				segment_size += linked_list->data.address32.resource_source.string_length;
+				segment_size++;
+			}
+			break;
+
+		case ACPI_RSTYPE_ADDRESS64:
+			/*
+			 * 64-Bit Address Resource
+			 * The base size of this byte stream is 46. If a resource_source
+			 * string is not NULL, add 1 for the Index + the length of the null
+			 * terminated string Resource Source + 1 for the null.
+			 */
+			segment_size = 46;
+
+			if (linked_list->data.address64.resource_source.string_ptr) {
+				segment_size += linked_list->data.address64.resource_source.string_length;
+				segment_size++;
+			}
+			break;
+
+		case ACPI_RSTYPE_EXT_IRQ:
+			/*
+			 * Extended IRQ Resource
+			 * The base size of this byte stream is 9. This is for an Interrupt
+			 * table length of 1.  For each additional interrupt, add 4.
+			 * If a Resource Source string is not NULL, add 1 for the
+			 * Index + the length of the null terminated string
+			 * Resource Source + 1 for the null.
+			 */
+			segment_size = 9 +
+				(((acpi_size) linked_list->data.extended_irq.number_of_interrupts - 1) * 4);
+
+			if (linked_list->data.extended_irq.resource_source.string_ptr) {
+				segment_size += linked_list->data.extended_irq.resource_source.string_length;
+				segment_size++;
+			}
+			break;
+
+		default:
+			/*
+			 * If we get here, everything is out of sync, exit with error
+			 */
+			return_ACPI_STATUS (AE_AML_INVALID_RESOURCE_TYPE);
+
+		} /* switch (linked_list->Id) */
+
+		/*
+		 * Update the total
+		 */
+		byte_stream_size_needed += segment_size;
+
+		/*
+		 * Point to the next object
+		 */
+		linked_list = ACPI_PTR_ADD (struct acpi_resource,
+				  linked_list, linked_list->length);
+	}
+
+	/*
+	 * This is the data the caller needs
+	 */
+	*size_needed = byte_stream_size_needed;
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_get_list_length
+ *
+ * PARAMETERS:  byte_stream_buffer      - Pointer to the resource byte stream
+ *              byte_stream_buffer_length - Size of byte_stream_buffer
+ *              size_needed             - u32 pointer of the size buffer
+ *                                        needed to properly return the
+ *                                        parsed data
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Takes the resource byte stream and parses it once, calculating
+ *              the size buffer needed to hold the linked list that conveys
+ *              the resource data.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_rs_get_list_length (
+	u8                              *byte_stream_buffer,
+	u32                             byte_stream_buffer_length,
+	acpi_size                       *size_needed)
+{
+	u32                             buffer_size = 0;
+	u32                             bytes_parsed = 0;
+	u8                              number_of_interrupts = 0;
+	u8                              number_of_channels = 0;
+	u8                              resource_type;
+	u32                             structure_size;
+	u32                             bytes_consumed;
+	u8                              *buffer;
+	u8                              temp8;
+	u16                             temp16;
+	u8                              index;
+	u8                              additional_bytes;
+
+
+	ACPI_FUNCTION_TRACE ("rs_get_list_length");
+
+
+	while (bytes_parsed < byte_stream_buffer_length) {
+		/*
+		 * The next byte in the stream is the resource type
+		 */
+		resource_type = acpi_rs_get_resource_type (*byte_stream_buffer);
+
+		switch (resource_type) {
+		case ACPI_RDESC_TYPE_MEMORY_24:
+			/*
+			 * 24-Bit Memory Resource
+			 */
+			bytes_consumed = 12;
+
+			structure_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_mem24);
+			break;
+
+
+		case ACPI_RDESC_TYPE_LARGE_VENDOR:
+			/*
+			 * Vendor Defined Resource
+			 */
+			buffer = byte_stream_buffer;
+			++buffer;
+
+			ACPI_MOVE_16_TO_16 (&temp16, buffer);
+			bytes_consumed = temp16 + 3;
+
+			/*
+			 * Ensure a 32-bit boundary for the structure
+			 */
+			temp16 = (u16) ACPI_ROUND_UP_to_32_bITS (temp16);
+
+			structure_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_vendor) +
+					   (temp16 * sizeof (u8));
+			break;
+
+
+		case ACPI_RDESC_TYPE_MEMORY_32:
+			/*
+			 * 32-Bit Memory Range Resource
+			 */
+			bytes_consumed = 20;
+
+			structure_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_mem32);
+			break;
+
+
+		case ACPI_RDESC_TYPE_FIXED_MEMORY_32:
+			/*
+			 * 32-Bit Fixed Memory Resource
+			 */
+			bytes_consumed = 12;
+
+			structure_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_fixed_mem32);
+			break;
+
+
+		case ACPI_RDESC_TYPE_EXTENDED_ADDRESS_SPACE:
+			/*
+			 * 64-Bit Address Resource
+			 */
+			buffer = byte_stream_buffer;
+
+			++buffer;
+			ACPI_MOVE_16_TO_16 (&temp16, buffer);
+
+			bytes_consumed = temp16 + 3;
+			structure_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_address64);
+			break;
+
+
+		case ACPI_RDESC_TYPE_QWORD_ADDRESS_SPACE:
+			/*
+			 * 64-Bit Address Resource
+			 */
+			buffer = byte_stream_buffer;
+
+			++buffer;
+			ACPI_MOVE_16_TO_16 (&temp16, buffer);
+
+			bytes_consumed = temp16 + 3;
+
+			/*
+			 * Resource Source Index and Resource Source are optional elements.
+			 * Check the length of the Bytestream.  If it is greater than 43,
+			 * that means that an Index exists and is followed by a null
+			 * terminated string.  Therefore, set the temp variable to the
+			 * length minus the minimum byte stream length plus the byte for
+			 * the Index to determine the size of the NULL terminated string.
+			 */
+			if (43 < temp16) {
+				temp8 = (u8) (temp16 - 44);
+			}
+			else {
+				temp8 = 0;
+			}
+
+			/*
+			 * Ensure a 64-bit boundary for the structure
+			 */
+			temp8 = (u8) ACPI_ROUND_UP_to_64_bITS (temp8);
+
+			structure_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_address64) +
+					   (temp8 * sizeof (u8));
+			break;
+
+
+		case ACPI_RDESC_TYPE_DWORD_ADDRESS_SPACE:
+			/*
+			 * 32-Bit Address Resource
+			 */
+			buffer = byte_stream_buffer;
+
+			++buffer;
+			ACPI_MOVE_16_TO_16 (&temp16, buffer);
+
+			bytes_consumed = temp16 + 3;
+
+			/*
+			 * Resource Source Index and Resource Source are optional elements.
+			 * Check the length of the Bytestream.  If it is greater than 23,
+			 * that means that an Index exists and is followed by a null
+			 * terminated string.  Therefore, set the temp variable to the
+			 * length minus the minimum byte stream length plus the byte for
+			 * the Index to determine the size of the NULL terminated string.
+			 */
+			if (23 < temp16) {
+				temp8 = (u8) (temp16 - 24);
+			}
+			else {
+				temp8 = 0;
+			}
+
+			/*
+			 * Ensure a 32-bit boundary for the structure
+			 */
+			temp8 = (u8) ACPI_ROUND_UP_to_32_bITS (temp8);
+
+			structure_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_address32) +
+					   (temp8 * sizeof (u8));
+			break;
+
+
+		case ACPI_RDESC_TYPE_WORD_ADDRESS_SPACE:
+			/*
+			 * 16-Bit Address Resource
+			 */
+			buffer = byte_stream_buffer;
+
+			++buffer;
+			ACPI_MOVE_16_TO_16 (&temp16, buffer);
+
+			bytes_consumed = temp16 + 3;
+
+			/*
+			 * Resource Source Index and Resource Source are optional elements.
+			 * Check the length of the Bytestream.  If it is greater than 13,
+			 * that means that an Index exists and is followed by a null
+			 * terminated string.  Therefore, set the temp variable to the
+			 * length minus the minimum byte stream length plus the byte for
+			 * the Index to determine the size of the NULL terminated string.
+			 */
+			if (13 < temp16) {
+				temp8 = (u8) (temp16 - 14);
+			}
+			else {
+				temp8 = 0;
+			}
+
+			/*
+			 * Ensure a 32-bit boundary for the structure
+			 */
+			temp8 = (u8) ACPI_ROUND_UP_to_32_bITS (temp8);
+
+			structure_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_address16) +
+					   (temp8 * sizeof (u8));
+			break;
+
+
+		case ACPI_RDESC_TYPE_EXTENDED_XRUPT:
+			/*
+			 * Extended IRQ
+			 */
+			buffer = byte_stream_buffer;
+
+			++buffer;
+			ACPI_MOVE_16_TO_16 (&temp16, buffer);
+
+			bytes_consumed = temp16 + 3;
+
+			/*
+			 * Point past the length field and the Interrupt vector flags to
+			 * save off the Interrupt table length to the Temp8 variable.
+			 */
+			buffer += 3;
+			temp8 = *buffer;
+
+			/*
+			 * To compensate for multiple interrupt numbers, add 4 bytes for
+			 * each additional interrupts greater than 1
+			 */
+			additional_bytes = (u8) ((temp8 - 1) * 4);
+
+			/*
+			 * Resource Source Index and Resource Source are optional elements.
+			 * Check the length of the Bytestream.  If it is greater than 9,
+			 * that means that an Index exists and is followed by a null
+			 * terminated string.  Therefore, set the temp variable to the
+			 * length minus the minimum byte stream length plus the byte for
+			 * the Index to determine the size of the NULL terminated string.
+			 */
+			if (9 + additional_bytes < temp16) {
+				temp8 = (u8) (temp16 - (9 + additional_bytes));
+			}
+			else {
+				temp8 = 0;
+			}
+
+			/*
+			 * Ensure a 32-bit boundary for the structure
+			 */
+			temp8 = (u8) ACPI_ROUND_UP_to_32_bITS (temp8);
+
+			structure_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_ext_irq) +
+					   (additional_bytes * sizeof (u8)) +
+					   (temp8 * sizeof (u8));
+			break;
+
+
+		case ACPI_RDESC_TYPE_IRQ_FORMAT:
+			/*
+			 * IRQ Resource.
+			 * Determine if it there are two or three trailing bytes
+			 */
+			buffer = byte_stream_buffer;
+			temp8 = *buffer;
+
+			if(temp8 & 0x01) {
+				bytes_consumed = 4;
+			}
+			else {
+				bytes_consumed = 3;
+			}
+
+			/* Point past the descriptor */
+
+			++buffer;
+
+			/*
+			 * Look at the number of bits set
+			 */
+			ACPI_MOVE_16_TO_16 (&temp16, buffer);
+
+			for (index = 0; index < 16; index++) {
+				if (temp16 & 0x1) {
+					++number_of_interrupts;
+				}
+
+				temp16 >>= 1;
+			}
+
+			structure_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_io) +
+					   (number_of_interrupts * sizeof (u32));
+			break;
+
+
+		case ACPI_RDESC_TYPE_DMA_FORMAT:
+			/*
+			 * DMA Resource
+			 */
+			buffer = byte_stream_buffer;
+			bytes_consumed = 3;
+
+			/* Point past the descriptor */
+
+			++buffer;
+
+			/*
+			 * Look at the number of bits set
+			 */
+			temp8 = *buffer;
+
+			for(index = 0; index < 8; index++) {
+				if(temp8 & 0x1) {
+					++number_of_channels;
+				}
+
+				temp8 >>= 1;
+			}
+
+			structure_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_dma) +
+					   (number_of_channels * sizeof (u32));
+			break;
+
+
+		case ACPI_RDESC_TYPE_START_DEPENDENT:
+			/*
+			 * Start Dependent Functions Resource
+			 * Determine if it there are two or three trailing bytes
+			 */
+			buffer = byte_stream_buffer;
+			temp8 = *buffer;
+
+			if(temp8 & 0x01) {
+				bytes_consumed = 2;
+			}
+			else {
+				bytes_consumed = 1;
+			}
+
+			structure_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_start_dpf);
+			break;
+
+
+		case ACPI_RDESC_TYPE_END_DEPENDENT:
+			/*
+			 * End Dependent Functions Resource
+			 */
+			bytes_consumed = 1;
+			structure_size = ACPI_RESOURCE_LENGTH;
+			break;
+
+
+		case ACPI_RDESC_TYPE_IO_PORT:
+			/*
+			 * IO Port Resource
+			 */
+			bytes_consumed = 8;
+			structure_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_io);
+			break;
+
+
+		case ACPI_RDESC_TYPE_FIXED_IO_PORT:
+			/*
+			 * Fixed IO Port Resource
+			 */
+			bytes_consumed = 4;
+			structure_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_fixed_io);
+			break;
+
+
+		case ACPI_RDESC_TYPE_SMALL_VENDOR:
+			/*
+			 * Vendor Specific Resource
+			 */
+			buffer = byte_stream_buffer;
+
+			temp8 = *buffer;
+			temp8 = (u8) (temp8 & 0x7);
+			bytes_consumed = temp8 + 1;
+
+			/*
+			 * Ensure a 32-bit boundary for the structure
+			 */
+			temp8 = (u8) ACPI_ROUND_UP_to_32_bITS (temp8);
+			structure_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_vendor) +
+					   (temp8 * sizeof (u8));
+			break;
+
+
+		case ACPI_RDESC_TYPE_END_TAG:
+			/*
+			 * End Tag
+			 */
+			bytes_consumed = 2;
+			structure_size = ACPI_RESOURCE_LENGTH;
+			byte_stream_buffer_length = bytes_parsed;
+			break;
+
+
+		default:
+			/*
+			 * If we get here, everything is out of sync,
+			 * exit with an error
+			 */
+			return_ACPI_STATUS (AE_AML_INVALID_RESOURCE_TYPE);
+		}
+
+		/*
+		 * Update the return value and counter
+		 */
+		buffer_size += (u32) ACPI_ALIGN_RESOURCE_SIZE (structure_size);
+		bytes_parsed += bytes_consumed;
+
+		/*
+		 * Set the byte stream to point to the next resource
+		 */
+		byte_stream_buffer += bytes_consumed;
+	}
+
+	/*
+	 * This is the data the caller needs
+	 */
+	*size_needed = buffer_size;
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_get_pci_routing_table_length
+ *
+ * PARAMETERS:  package_object          - Pointer to the package object
+ *              buffer_size_needed      - u32 pointer of the size buffer
+ *                                        needed to properly return the
+ *                                        parsed data
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Given a package representing a PCI routing table, this
+ *              calculates the size of the corresponding linked list of
+ *              descriptions.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_rs_get_pci_routing_table_length (
+	union acpi_operand_object       *package_object,
+	acpi_size                       *buffer_size_needed)
+{
+	u32                             number_of_elements;
+	acpi_size                       temp_size_needed = 0;
+	union acpi_operand_object       **top_object_list;
+	u32                             index;
+	union acpi_operand_object       *package_element;
+	union acpi_operand_object       **sub_object_list;
+	u8                              name_found;
+	u32                             table_index;
+
+
+	ACPI_FUNCTION_TRACE ("rs_get_pci_routing_table_length");
+
+
+	number_of_elements = package_object->package.count;
+
+	/*
+	 * Calculate the size of the return buffer.
+	 * The base size is the number of elements * the sizes of the
+	 * structures.  Additional space for the strings is added below.
+	 * The minus one is to subtract the size of the u8 Source[1]
+	 * member because it is added below.
+	 *
+	 * But each PRT_ENTRY structure has a pointer to a string and
+	 * the size of that string must be found.
+	 */
+	top_object_list = package_object->package.elements;
+
+	for (index = 0; index < number_of_elements; index++) {
+		/*
+		 * Dereference the sub-package
+		 */
+		package_element = *top_object_list;
+
+		/*
+		 * The sub_object_list will now point to an array of the
+		 * four IRQ elements: Address, Pin, Source and source_index
+		 */
+		sub_object_list = package_element->package.elements;
+
+		/*
+		 * Scan the irq_table_elements for the Source Name String
+		 */
+		name_found = FALSE;
+
+		for (table_index = 0; table_index < 4 && !name_found; table_index++) {
+			if ((ACPI_TYPE_STRING == ACPI_GET_OBJECT_TYPE (*sub_object_list)) ||
+				((ACPI_TYPE_LOCAL_REFERENCE == ACPI_GET_OBJECT_TYPE (*sub_object_list)) &&
+					((*sub_object_list)->reference.opcode == AML_INT_NAMEPATH_OP))) {
+				name_found = TRUE;
+			}
+			else {
+				/*
+				 * Look at the next element
+				 */
+				sub_object_list++;
+			}
+		}
+
+		temp_size_needed += (sizeof (struct acpi_pci_routing_table) - 4);
+
+		/*
+		 * Was a String type found?
+		 */
+		if (name_found) {
+			if (ACPI_GET_OBJECT_TYPE (*sub_object_list) == ACPI_TYPE_STRING) {
+				/*
+				 * The length String.Length field does not include the
+				 * terminating NULL, add 1
+				 */
+				temp_size_needed += ((acpi_size) (*sub_object_list)->string.length + 1);
+			}
+			else {
+				temp_size_needed += acpi_ns_get_pathname_length (
+						   (*sub_object_list)->reference.node);
+			}
+		}
+		else {
+			/*
+			 * If no name was found, then this is a NULL, which is
+			 * translated as a u32 zero.
+			 */
+			temp_size_needed += sizeof (u32);
+		}
+
+		/* Round up the size since each element must be aligned */
+
+		temp_size_needed = ACPI_ROUND_UP_to_64_bITS (temp_size_needed);
+
+		/*
+		 * Point to the next union acpi_operand_object
+		 */
+		top_object_list++;
+	}
+
+	/*
+	 * Adding an extra element to the end of the list, essentially a NULL terminator
+	 */
+	*buffer_size_needed = temp_size_needed + sizeof (struct acpi_pci_routing_table);
+	return_ACPI_STATUS (AE_OK);
+}
diff --git a/drivers/acpi/resources/rscreate.c b/drivers/acpi/resources/rscreate.c
new file mode 100644
index 0000000..a3a0cbf
--- /dev/null
+++ b/drivers/acpi/resources/rscreate.c
@@ -0,0 +1,428 @@
+/*******************************************************************************
+ *
+ * Module Name: rscreate - Create resource lists/tables
+ *
+ ******************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#include <acpi/acpi.h>
+#include <acpi/acresrc.h>
+#include <acpi/amlcode.h>
+#include <acpi/acnamesp.h>
+
+#define _COMPONENT          ACPI_RESOURCES
+	 ACPI_MODULE_NAME    ("rscreate")
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_create_resource_list
+ *
+ * PARAMETERS:  byte_stream_buffer      - Pointer to the resource byte stream
+ *              output_buffer           - Pointer to the user's buffer
+ *
+ * RETURN:      Status  - AE_OK if okay, else a valid acpi_status code
+ *              If output_buffer is not large enough, output_buffer_length
+ *              indicates how large output_buffer should be, else it
+ *              indicates how may u8 elements of output_buffer are valid.
+ *
+ * DESCRIPTION: Takes the byte stream returned from a _CRS, _PRS control method
+ *              execution and parses the stream to create a linked list
+ *              of device resources.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_rs_create_resource_list (
+	union acpi_operand_object       *byte_stream_buffer,
+	struct acpi_buffer              *output_buffer)
+{
+
+	acpi_status                     status;
+	u8                              *byte_stream_start;
+	acpi_size                       list_size_needed = 0;
+	u32                             byte_stream_buffer_length;
+
+
+	ACPI_FUNCTION_TRACE ("rs_create_resource_list");
+
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_INFO, "byte_stream_buffer = %p\n",
+		byte_stream_buffer));
+
+	/*
+	 * Params already validated, so we don't re-validate here
+	 */
+	byte_stream_buffer_length = byte_stream_buffer->buffer.length;
+	byte_stream_start = byte_stream_buffer->buffer.pointer;
+
+	/*
+	 * Pass the byte_stream_buffer into a module that can calculate
+	 * the buffer size needed for the linked list
+	 */
+	status = acpi_rs_get_list_length (byte_stream_start, byte_stream_buffer_length,
+			 &list_size_needed);
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_INFO, "Status=%X list_size_needed=%X\n",
+		status, (u32) list_size_needed));
+	if (ACPI_FAILURE (status)) {
+		return_ACPI_STATUS (status);
+	}
+
+	/* Validate/Allocate/Clear caller buffer */
+
+	status = acpi_ut_initialize_buffer (output_buffer, list_size_needed);
+	if (ACPI_FAILURE (status)) {
+		return_ACPI_STATUS (status);
+	}
+
+	/* Do the conversion */
+
+	status = acpi_rs_byte_stream_to_list (byte_stream_start, byte_stream_buffer_length,
+			  output_buffer->pointer);
+	if (ACPI_FAILURE (status)) {
+		return_ACPI_STATUS (status);
+	}
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_INFO, "output_buffer %p Length %X\n",
+			output_buffer->pointer, (u32) output_buffer->length));
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_create_pci_routing_table
+ *
+ * PARAMETERS:  package_object          - Pointer to an union acpi_operand_object
+ *                                        package
+ *              output_buffer           - Pointer to the user's buffer
+ *
+ * RETURN:      Status  AE_OK if okay, else a valid acpi_status code.
+ *              If the output_buffer is too small, the error will be
+ *              AE_BUFFER_OVERFLOW and output_buffer->Length will point
+ *              to the size buffer needed.
+ *
+ * DESCRIPTION: Takes the union acpi_operand_object    package and creates a
+ *              linked list of PCI interrupt descriptions
+ *
+ * NOTE: It is the caller's responsibility to ensure that the start of the
+ * output buffer is aligned properly (if necessary).
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_rs_create_pci_routing_table (
+	union acpi_operand_object       *package_object,
+	struct acpi_buffer              *output_buffer)
+{
+	u8                              *buffer;
+	union acpi_operand_object       **top_object_list;
+	union acpi_operand_object       **sub_object_list;
+	union acpi_operand_object       *obj_desc;
+	acpi_size                       buffer_size_needed = 0;
+	u32                             number_of_elements;
+	u32                             index;
+	struct acpi_pci_routing_table   *user_prt;
+	struct acpi_namespace_node      *node;
+	acpi_status                     status;
+	struct acpi_buffer              path_buffer;
+
+
+	ACPI_FUNCTION_TRACE ("rs_create_pci_routing_table");
+
+
+	/* Params already validated, so we don't re-validate here */
+
+	/*
+	 * Get the required buffer length
+	 */
+	status = acpi_rs_get_pci_routing_table_length (package_object,
+			 &buffer_size_needed);
+	if (ACPI_FAILURE (status)) {
+		return_ACPI_STATUS (status);
+	}
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_INFO, "buffer_size_needed = %X\n",
+		(u32) buffer_size_needed));
+
+	/* Validate/Allocate/Clear caller buffer */
+
+	status = acpi_ut_initialize_buffer (output_buffer, buffer_size_needed);
+	if (ACPI_FAILURE (status)) {
+		return_ACPI_STATUS (status);
+	}
+
+	/*
+	 * Loop through the ACPI_INTERNAL_OBJECTS - Each object
+	 * should be a package that in turn contains an
+	 * acpi_integer Address, a u8 Pin, a Name and a u8 source_index.
+	 */
+	top_object_list  = package_object->package.elements;
+	number_of_elements = package_object->package.count;
+	buffer           = output_buffer->pointer;
+	user_prt         = ACPI_CAST_PTR (struct acpi_pci_routing_table, buffer);
+
+	for (index = 0; index < number_of_elements; index++) {
+		/*
+		 * Point user_prt past this current structure
+		 *
+		 * NOTE: On the first iteration, user_prt->Length will
+		 * be zero because we cleared the return buffer earlier
+		 */
+		buffer += user_prt->length;
+		user_prt = ACPI_CAST_PTR (struct acpi_pci_routing_table, buffer);
+
+		/*
+		 * Fill in the Length field with the information we have at this point.
+		 * The minus four is to subtract the size of the u8 Source[4] member
+		 * because it is added below.
+		 */
+		user_prt->length = (sizeof (struct acpi_pci_routing_table) - 4);
+
+		/*
+		 * Each element of the top-level package must also be a package
+		 */
+		if (ACPI_GET_OBJECT_TYPE (*top_object_list) != ACPI_TYPE_PACKAGE) {
+			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+				"(PRT[%X]) Need sub-package, found %s\n",
+				index, acpi_ut_get_object_type_name (*top_object_list)));
+			return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
+		}
+
+		/* Each sub-package must be of length 4 */
+
+		if ((*top_object_list)->package.count != 4) {
+			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+				"(PRT[%X]) Need package of length 4, found length %d\n",
+				index, (*top_object_list)->package.count));
+			return_ACPI_STATUS (AE_AML_PACKAGE_LIMIT);
+		}
+
+		/*
+		 * Dereference the sub-package.
+		 * The sub_object_list will now point to an array of the four IRQ
+		 * elements: [Address, Pin, Source, source_index]
+		 */
+		sub_object_list = (*top_object_list)->package.elements;
+
+		/*
+		 * 1) First subobject: Dereference the PRT.Address
+		 */
+		obj_desc = sub_object_list[0];
+		if (ACPI_GET_OBJECT_TYPE (obj_desc) == ACPI_TYPE_INTEGER) {
+			user_prt->address = obj_desc->integer.value;
+		}
+		else {
+			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+				"(PRT[%X].Address) Need Integer, found %s\n",
+				index, acpi_ut_get_object_type_name (obj_desc)));
+			return_ACPI_STATUS (AE_BAD_DATA);
+		}
+
+		/*
+		 * 2) Second subobject: Dereference the PRT.Pin
+		 */
+		obj_desc = sub_object_list[1];
+		if (ACPI_GET_OBJECT_TYPE (obj_desc) == ACPI_TYPE_INTEGER) {
+			user_prt->pin = (u32) obj_desc->integer.value;
+		}
+		else {
+			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+				"(PRT[%X].Pin) Need Integer, found %s\n",
+				index, acpi_ut_get_object_type_name (obj_desc)));
+			return_ACPI_STATUS (AE_BAD_DATA);
+		}
+
+		/*
+		 * 3) Third subobject: Dereference the PRT.source_name
+		 */
+		obj_desc = sub_object_list[2];
+		switch (ACPI_GET_OBJECT_TYPE (obj_desc)) {
+		case ACPI_TYPE_LOCAL_REFERENCE:
+
+			if (obj_desc->reference.opcode != AML_INT_NAMEPATH_OP) {
+				ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+					"(PRT[%X].Source) Need name, found reference op %X\n",
+					index, obj_desc->reference.opcode));
+				return_ACPI_STATUS (AE_BAD_DATA);
+			}
+
+			node = obj_desc->reference.node;
+
+			/* Use *remaining* length of the buffer as max for pathname */
+
+			path_buffer.length = output_buffer->length -
+					   (u32) ((u8 *) user_prt->source -
+					   (u8 *) output_buffer->pointer);
+			path_buffer.pointer = user_prt->source;
+
+			status = acpi_ns_handle_to_pathname ((acpi_handle) node, &path_buffer);
+
+			user_prt->length += (u32) ACPI_STRLEN (user_prt->source) + 1; /* include null terminator */
+			break;
+
+
+		case ACPI_TYPE_STRING:
+
+			ACPI_STRCPY (user_prt->source, obj_desc->string.pointer);
+
+			/* Add to the Length field the length of the string (add 1 for terminator) */
+
+			user_prt->length += obj_desc->string.length + 1;
+			break;
+
+
+		case ACPI_TYPE_INTEGER:
+			/*
+			 * If this is a number, then the Source Name is NULL, since the
+			 * entire buffer was zeroed out, we can leave this alone.
+			 *
+			 * Add to the Length field the length of the u32 NULL
+			 */
+			user_prt->length += sizeof (u32);
+			break;
+
+
+		default:
+
+		   ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+			   "(PRT[%X].Source) Need Ref/String/Integer, found %s\n",
+				index, acpi_ut_get_object_type_name (obj_desc)));
+		   return_ACPI_STATUS (AE_BAD_DATA);
+		}
+
+		/* Now align the current length */
+
+		user_prt->length = (u32) ACPI_ROUND_UP_to_64_bITS (user_prt->length);
+
+		/*
+		 * 4) Fourth subobject: Dereference the PRT.source_index
+		 */
+		obj_desc = sub_object_list[3];
+		if (ACPI_GET_OBJECT_TYPE (obj_desc) == ACPI_TYPE_INTEGER) {
+			user_prt->source_index = (u32) obj_desc->integer.value;
+		}
+		else {
+			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+				"(PRT[%X].source_index) Need Integer, found %s\n",
+				index, acpi_ut_get_object_type_name (obj_desc)));
+			return_ACPI_STATUS (AE_BAD_DATA);
+		}
+
+		/* Point to the next union acpi_operand_object in the top level package */
+
+		top_object_list++;
+	}
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_INFO, "output_buffer %p Length %X\n",
+			output_buffer->pointer, (u32) output_buffer->length));
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_create_byte_stream
+ *
+ * PARAMETERS:  linked_list_buffer      - Pointer to the resource linked list
+ *              output_buffer           - Pointer to the user's buffer
+ *
+ * RETURN:      Status  AE_OK if okay, else a valid acpi_status code.
+ *              If the output_buffer is too small, the error will be
+ *              AE_BUFFER_OVERFLOW and output_buffer->Length will point
+ *              to the size buffer needed.
+ *
+ * DESCRIPTION: Takes the linked list of device resources and
+ *              creates a bytestream to be used as input for the
+ *              _SRS control method.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_rs_create_byte_stream (
+	struct acpi_resource            *linked_list_buffer,
+	struct acpi_buffer              *output_buffer)
+{
+	acpi_status                     status;
+	acpi_size                       byte_stream_size_needed = 0;
+
+
+	ACPI_FUNCTION_TRACE ("rs_create_byte_stream");
+
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_INFO, "linked_list_buffer = %p\n",
+		linked_list_buffer));
+
+	/*
+	 * Params already validated, so we don't re-validate here
+	 *
+	 * Pass the linked_list_buffer into a module that calculates
+	 * the buffer size needed for the byte stream.
+	 */
+	status = acpi_rs_get_byte_stream_length (linked_list_buffer,
+			 &byte_stream_size_needed);
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_INFO, "byte_stream_size_needed=%X, %s\n",
+		(u32) byte_stream_size_needed, acpi_format_exception (status)));
+	if (ACPI_FAILURE (status)) {
+		return_ACPI_STATUS (status);
+	}
+
+	/* Validate/Allocate/Clear caller buffer */
+
+	status = acpi_ut_initialize_buffer (output_buffer, byte_stream_size_needed);
+	if (ACPI_FAILURE (status)) {
+		return_ACPI_STATUS (status);
+	}
+
+	/* Do the conversion */
+
+	status = acpi_rs_list_to_byte_stream (linked_list_buffer, byte_stream_size_needed,
+			  output_buffer->pointer);
+	if (ACPI_FAILURE (status)) {
+		return_ACPI_STATUS (status);
+	}
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_INFO, "output_buffer %p Length %X\n",
+			output_buffer->pointer, (u32) output_buffer->length));
+	return_ACPI_STATUS (AE_OK);
+}
+
diff --git a/drivers/acpi/resources/rsdump.c b/drivers/acpi/resources/rsdump.c
new file mode 100644
index 0000000..eef1b1f
--- /dev/null
+++ b/drivers/acpi/resources/rsdump.c
@@ -0,0 +1,1150 @@
+/*******************************************************************************
+ *
+ * Module Name: rsdump - Functions to display the resource structures.
+ *
+ ******************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#include <acpi/acpi.h>
+#include <acpi/acresrc.h>
+
+#define _COMPONENT          ACPI_RESOURCES
+	 ACPI_MODULE_NAME    ("rsdump")
+
+
+#if defined(ACPI_DEBUG_OUTPUT) || defined(ACPI_DEBUGGER)
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_dump_irq
+ *
+ * PARAMETERS:  Data            - pointer to the resource structure to dump.
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Prints out the various members of the Data structure type.
+ *
+ ******************************************************************************/
+
+void
+acpi_rs_dump_irq (
+	union acpi_resource_data        *data)
+{
+	struct acpi_resource_irq        *irq_data = (struct acpi_resource_irq *) data;
+	u8                              index = 0;
+
+
+	ACPI_FUNCTION_ENTRY ();
+
+
+	acpi_os_printf ("IRQ Resource\n");
+
+	acpi_os_printf ("  %s Triggered\n",
+			 ACPI_LEVEL_SENSITIVE == irq_data->edge_level ? "Level" : "Edge");
+
+	acpi_os_printf ("  Active %s\n",
+			 ACPI_ACTIVE_LOW == irq_data->active_high_low ? "Low" : "High");
+
+	acpi_os_printf ("  %s\n",
+			 ACPI_SHARED == irq_data->shared_exclusive ? "Shared" : "Exclusive");
+
+	acpi_os_printf ("  %X Interrupts ( ", irq_data->number_of_interrupts);
+
+	for (index = 0; index < irq_data->number_of_interrupts; index++) {
+		acpi_os_printf ("%X ", irq_data->interrupts[index]);
+	}
+
+	acpi_os_printf (")\n");
+	return;
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_dump_dma
+ *
+ * PARAMETERS:  Data            - pointer to the resource structure to dump.
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Prints out the various members of the Data structure type.
+ *
+ ******************************************************************************/
+
+void
+acpi_rs_dump_dma (
+	union acpi_resource_data        *data)
+{
+	struct acpi_resource_dma        *dma_data = (struct acpi_resource_dma *) data;
+	u8                              index = 0;
+
+
+	ACPI_FUNCTION_ENTRY ();
+
+
+	acpi_os_printf ("DMA Resource\n");
+
+	switch (dma_data->type) {
+	case ACPI_COMPATIBILITY:
+		acpi_os_printf ("  Compatibility mode\n");
+		break;
+
+	case ACPI_TYPE_A:
+		acpi_os_printf ("  Type A\n");
+		break;
+
+	case ACPI_TYPE_B:
+		acpi_os_printf ("  Type B\n");
+		break;
+
+	case ACPI_TYPE_F:
+		acpi_os_printf ("  Type F\n");
+		break;
+
+	default:
+		acpi_os_printf ("  Invalid DMA type\n");
+		break;
+	}
+
+	acpi_os_printf ("  %sBus Master\n",
+			 ACPI_BUS_MASTER == dma_data->bus_master ? "" : "Not a ");
+
+
+	switch (dma_data->transfer) {
+	case ACPI_TRANSFER_8:
+		acpi_os_printf ("  8-bit only transfer\n");
+		break;
+
+	case ACPI_TRANSFER_8_16:
+		acpi_os_printf ("  8 and 16-bit transfer\n");
+		break;
+
+	case ACPI_TRANSFER_16:
+		acpi_os_printf ("  16 bit only transfer\n");
+		break;
+
+	default:
+		acpi_os_printf ("  Invalid transfer preference\n");
+		break;
+	}
+
+	acpi_os_printf ("  Number of Channels: %X ( ", dma_data->number_of_channels);
+
+	for (index = 0; index < dma_data->number_of_channels; index++) {
+		acpi_os_printf ("%X ", dma_data->channels[index]);
+	}
+
+	acpi_os_printf (")\n");
+	return;
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_dump_start_depend_fns
+ *
+ * PARAMETERS:  Data            - pointer to the resource structure to dump.
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Prints out the various members of the Data structure type.
+ *
+ ******************************************************************************/
+
+void
+acpi_rs_dump_start_depend_fns (
+	union acpi_resource_data        *data)
+{
+	struct acpi_resource_start_dpf *sdf_data = (struct acpi_resource_start_dpf *) data;
+
+
+	ACPI_FUNCTION_ENTRY ();
+
+
+	acpi_os_printf ("Start Dependent Functions Resource\n");
+
+	switch (sdf_data->compatibility_priority) {
+	case ACPI_GOOD_CONFIGURATION:
+		acpi_os_printf ("  Good configuration\n");
+		break;
+
+	case ACPI_ACCEPTABLE_CONFIGURATION:
+		acpi_os_printf ("  Acceptable configuration\n");
+		break;
+
+	case ACPI_SUB_OPTIMAL_CONFIGURATION:
+		acpi_os_printf ("  Sub-optimal configuration\n");
+		break;
+
+	default:
+		acpi_os_printf ("  Invalid compatibility priority\n");
+		break;
+	}
+
+	switch(sdf_data->performance_robustness) {
+	case ACPI_GOOD_CONFIGURATION:
+		acpi_os_printf ("  Good configuration\n");
+		break;
+
+	case ACPI_ACCEPTABLE_CONFIGURATION:
+		acpi_os_printf ("  Acceptable configuration\n");
+		break;
+
+	case ACPI_SUB_OPTIMAL_CONFIGURATION:
+		acpi_os_printf ("  Sub-optimal configuration\n");
+		break;
+
+	default:
+		acpi_os_printf ("  Invalid performance "
+				  "robustness preference\n");
+		break;
+	}
+
+	return;
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_dump_io
+ *
+ * PARAMETERS:  Data            - pointer to the resource structure to dump.
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Prints out the various members of the Data structure type.
+ *
+ ******************************************************************************/
+
+void
+acpi_rs_dump_io (
+	union acpi_resource_data        *data)
+{
+	struct acpi_resource_io         *io_data = (struct acpi_resource_io *) data;
+
+
+	ACPI_FUNCTION_ENTRY ();
+
+
+	acpi_os_printf ("Io Resource\n");
+
+	acpi_os_printf ("  %d bit decode\n",
+			 ACPI_DECODE_16 == io_data->io_decode ? 16 : 10);
+
+	acpi_os_printf ("  Range minimum base: %08X\n",
+			 io_data->min_base_address);
+
+	acpi_os_printf ("  Range maximum base: %08X\n",
+			 io_data->max_base_address);
+
+	acpi_os_printf ("  Alignment: %08X\n",
+			 io_data->alignment);
+
+	acpi_os_printf ("  Range Length: %08X\n",
+			 io_data->range_length);
+
+	return;
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_dump_fixed_io
+ *
+ * PARAMETERS:  Data            - pointer to the resource structure to dump.
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Prints out the various members of the Data structure type.
+ *
+ ******************************************************************************/
+
+void
+acpi_rs_dump_fixed_io (
+	union acpi_resource_data        *data)
+{
+	struct acpi_resource_fixed_io   *fixed_io_data = (struct acpi_resource_fixed_io *) data;
+
+
+	ACPI_FUNCTION_ENTRY ();
+
+
+	acpi_os_printf ("Fixed Io Resource\n");
+	acpi_os_printf ("  Range base address: %08X",
+			 fixed_io_data->base_address);
+
+	acpi_os_printf ("  Range length: %08X",
+			 fixed_io_data->range_length);
+
+	return;
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_dump_vendor_specific
+ *
+ * PARAMETERS:  Data            - pointer to the resource structure to dump.
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Prints out the various members of the Data structure type.
+ *
+ ******************************************************************************/
+
+void
+acpi_rs_dump_vendor_specific (
+	union acpi_resource_data        *data)
+{
+	struct acpi_resource_vendor     *vendor_data = (struct acpi_resource_vendor *) data;
+	u16                             index = 0;
+
+
+	ACPI_FUNCTION_ENTRY ();
+
+
+	acpi_os_printf ("Vendor Specific Resource\n");
+
+	acpi_os_printf ("  Length: %08X\n", vendor_data->length);
+
+	for (index = 0; index < vendor_data->length; index++) {
+		acpi_os_printf ("  Byte %X: %08X\n",
+				 index, vendor_data->reserved[index]);
+	}
+
+	return;
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_dump_memory24
+ *
+ * PARAMETERS:  Data            - pointer to the resource structure to dump.
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Prints out the various members of the Data structure type.
+ *
+ ******************************************************************************/
+
+void
+acpi_rs_dump_memory24 (
+	union acpi_resource_data        *data)
+{
+	struct acpi_resource_mem24      *memory24_data = (struct acpi_resource_mem24 *) data;
+
+
+	ACPI_FUNCTION_ENTRY ();
+
+
+	acpi_os_printf ("24-Bit Memory Range Resource\n");
+
+	acpi_os_printf ("  Read%s\n",
+			 ACPI_READ_WRITE_MEMORY ==
+			 memory24_data->read_write_attribute ?
+			 "/Write" : " only");
+
+	acpi_os_printf ("  Range minimum base: %08X\n",
+			 memory24_data->min_base_address);
+
+	acpi_os_printf ("  Range maximum base: %08X\n",
+			 memory24_data->max_base_address);
+
+	acpi_os_printf ("  Alignment: %08X\n",
+			 memory24_data->alignment);
+
+	acpi_os_printf ("  Range length: %08X\n",
+			 memory24_data->range_length);
+
+	return;
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_dump_memory32
+ *
+ * PARAMETERS:  Data            - pointer to the resource structure to dump.
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Prints out the various members of the Data structure type.
+ *
+ ******************************************************************************/
+
+void
+acpi_rs_dump_memory32 (
+	union acpi_resource_data        *data)
+{
+	struct acpi_resource_mem32      *memory32_data = (struct acpi_resource_mem32 *) data;
+
+
+	ACPI_FUNCTION_ENTRY ();
+
+
+	acpi_os_printf ("32-Bit Memory Range Resource\n");
+
+	acpi_os_printf ("  Read%s\n",
+			 ACPI_READ_WRITE_MEMORY ==
+			 memory32_data->read_write_attribute ?
+			 "/Write" : " only");
+
+	acpi_os_printf ("  Range minimum base: %08X\n",
+			 memory32_data->min_base_address);
+
+	acpi_os_printf ("  Range maximum base: %08X\n",
+			 memory32_data->max_base_address);
+
+	acpi_os_printf ("  Alignment: %08X\n",
+			 memory32_data->alignment);
+
+	acpi_os_printf ("  Range length: %08X\n",
+			 memory32_data->range_length);
+
+	return;
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_dump_fixed_memory32
+ *
+ * PARAMETERS:  Data            - pointer to the resource structure to dump.
+ *
+ * RETURN:
+ *
+ * DESCRIPTION: Prints out the various members of the Data structure type.
+ *
+ ******************************************************************************/
+
+void
+acpi_rs_dump_fixed_memory32 (
+	union acpi_resource_data            *data)
+{
+	struct acpi_resource_fixed_mem32    *fixed_memory32_data = (struct acpi_resource_fixed_mem32 *) data;
+
+
+	ACPI_FUNCTION_ENTRY ();
+
+
+	acpi_os_printf ("32-Bit Fixed Location Memory Range Resource\n");
+
+	acpi_os_printf ("  Read%s\n",
+			 ACPI_READ_WRITE_MEMORY ==
+			 fixed_memory32_data->read_write_attribute ?
+			 "/Write" : " Only");
+
+	acpi_os_printf ("  Range base address: %08X\n",
+			 fixed_memory32_data->range_base_address);
+
+	acpi_os_printf ("  Range length: %08X\n",
+			 fixed_memory32_data->range_length);
+
+	return;
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_dump_address16
+ *
+ * PARAMETERS:  Data            - pointer to the resource structure to dump.
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Prints out the various members of the Data structure type.
+ *
+ ******************************************************************************/
+
+void
+acpi_rs_dump_address16 (
+	union acpi_resource_data        *data)
+{
+	struct acpi_resource_address16 *address16_data = (struct acpi_resource_address16 *) data;
+
+
+	ACPI_FUNCTION_ENTRY ();
+
+
+	acpi_os_printf ("16-Bit Address Space Resource\n");
+	acpi_os_printf ("  Resource Type: ");
+
+	switch (address16_data->resource_type) {
+	case ACPI_MEMORY_RANGE:
+
+		acpi_os_printf ("Memory Range\n");
+
+		switch (address16_data->attribute.memory.cache_attribute) {
+		case ACPI_NON_CACHEABLE_MEMORY:
+			acpi_os_printf ("  Type Specific: "
+					  "Noncacheable memory\n");
+			break;
+
+		case ACPI_CACHABLE_MEMORY:
+			acpi_os_printf ("  Type Specific: "
+					  "Cacheable memory\n");
+			break;
+
+		case ACPI_WRITE_COMBINING_MEMORY:
+			acpi_os_printf ("  Type Specific: "
+					  "Write-combining memory\n");
+			break;
+
+		case ACPI_PREFETCHABLE_MEMORY:
+			acpi_os_printf ("  Type Specific: "
+					  "Prefetchable memory\n");
+			break;
+
+		default:
+			acpi_os_printf ("  Type Specific: "
+					  "Invalid cache attribute\n");
+			break;
+		}
+
+		acpi_os_printf ("  Type Specific: Read%s\n",
+			ACPI_READ_WRITE_MEMORY ==
+			address16_data->attribute.memory.read_write_attribute ?
+			"/Write" : " Only");
+		break;
+
+	case ACPI_IO_RANGE:
+
+		acpi_os_printf ("I/O Range\n");
+
+		switch (address16_data->attribute.io.range_attribute) {
+		case ACPI_NON_ISA_ONLY_RANGES:
+			acpi_os_printf ("  Type Specific: "
+					  "Non-ISA Io Addresses\n");
+			break;
+
+		case ACPI_ISA_ONLY_RANGES:
+			acpi_os_printf ("  Type Specific: "
+					  "ISA Io Addresses\n");
+			break;
+
+		case ACPI_ENTIRE_RANGE:
+			acpi_os_printf ("  Type Specific: "
+					  "ISA and non-ISA Io Addresses\n");
+			break;
+
+		default:
+			acpi_os_printf ("  Type Specific: "
+					  "Invalid range attribute\n");
+			break;
+		}
+
+		acpi_os_printf ("  Type Specific: %s Translation\n",
+			ACPI_SPARSE_TRANSLATION ==
+			address16_data->attribute.io.translation_attribute ?
+			"Sparse" : "Dense");
+		break;
+
+	case ACPI_BUS_NUMBER_RANGE:
+
+		acpi_os_printf ("Bus Number Range\n");
+		break;
+
+	default:
+
+		acpi_os_printf ("0x%2.2X\n", address16_data->resource_type);
+		break;
+	}
+
+	acpi_os_printf ("  Resource %s\n",
+			ACPI_CONSUMER == address16_data->producer_consumer ?
+			"Consumer" : "Producer");
+
+	acpi_os_printf ("  %s decode\n",
+			 ACPI_SUB_DECODE == address16_data->decode ?
+			 "Subtractive" : "Positive");
+
+	acpi_os_printf ("  Min address is %s fixed\n",
+			 ACPI_ADDRESS_FIXED == address16_data->min_address_fixed ?
+			 "" : "not");
+
+	acpi_os_printf ("  Max address is %s fixed\n",
+			 ACPI_ADDRESS_FIXED == address16_data->max_address_fixed ?
+			 "" : "not");
+
+	acpi_os_printf ("  Granularity: %08X\n",
+			 address16_data->granularity);
+
+	acpi_os_printf ("  Address range min: %08X\n",
+			 address16_data->min_address_range);
+
+	acpi_os_printf ("  Address range max: %08X\n",
+			 address16_data->max_address_range);
+
+	acpi_os_printf ("  Address translation offset: %08X\n",
+			 address16_data->address_translation_offset);
+
+	acpi_os_printf ("  Address Length: %08X\n",
+			 address16_data->address_length);
+
+	if (0xFF != address16_data->resource_source.index) {
+		acpi_os_printf ("  Resource Source Index: %X\n",
+				 address16_data->resource_source.index);
+		acpi_os_printf ("  Resource Source: %s\n",
+				 address16_data->resource_source.string_ptr);
+	}
+
+	return;
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_dump_address32
+ *
+ * PARAMETERS:  Data            - pointer to the resource structure to dump.
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Prints out the various members of the Data structure type.
+ *
+ ******************************************************************************/
+
+void
+acpi_rs_dump_address32 (
+	union acpi_resource_data        *data)
+{
+	struct acpi_resource_address32 *address32_data = (struct acpi_resource_address32 *) data;
+
+
+	ACPI_FUNCTION_ENTRY ();
+
+
+	acpi_os_printf ("32-Bit Address Space Resource\n");
+
+	switch (address32_data->resource_type) {
+	case ACPI_MEMORY_RANGE:
+
+		acpi_os_printf ("  Resource Type: Memory Range\n");
+
+		switch (address32_data->attribute.memory.cache_attribute) {
+		case ACPI_NON_CACHEABLE_MEMORY:
+			acpi_os_printf ("  Type Specific: "
+					  "Noncacheable memory\n");
+			break;
+
+		case ACPI_CACHABLE_MEMORY:
+			acpi_os_printf ("  Type Specific: "
+					  "Cacheable memory\n");
+			break;
+
+		case ACPI_WRITE_COMBINING_MEMORY:
+			acpi_os_printf ("  Type Specific: "
+					  "Write-combining memory\n");
+			break;
+
+		case ACPI_PREFETCHABLE_MEMORY:
+			acpi_os_printf ("  Type Specific: "
+					  "Prefetchable memory\n");
+			break;
+
+		default:
+			acpi_os_printf ("  Type Specific: "
+					  "Invalid cache attribute\n");
+			break;
+		}
+
+		acpi_os_printf ("  Type Specific: Read%s\n",
+			ACPI_READ_WRITE_MEMORY ==
+			address32_data->attribute.memory.read_write_attribute ?
+			"/Write" : " Only");
+		break;
+
+	case ACPI_IO_RANGE:
+
+		acpi_os_printf ("  Resource Type: Io Range\n");
+
+		switch (address32_data->attribute.io.range_attribute) {
+		case ACPI_NON_ISA_ONLY_RANGES:
+			acpi_os_printf ("  Type Specific: "
+					  "Non-ISA Io Addresses\n");
+			break;
+
+		case ACPI_ISA_ONLY_RANGES:
+			acpi_os_printf ("  Type Specific: "
+					  "ISA Io Addresses\n");
+			break;
+
+		case ACPI_ENTIRE_RANGE:
+			acpi_os_printf ("  Type Specific: "
+					  "ISA and non-ISA Io Addresses\n");
+			break;
+
+		default:
+			acpi_os_printf ("  Type Specific: "
+					  "Invalid Range attribute");
+			break;
+		}
+
+		acpi_os_printf ("  Type Specific: %s Translation\n",
+			ACPI_SPARSE_TRANSLATION ==
+			address32_data->attribute.io.translation_attribute ?
+			"Sparse" : "Dense");
+		break;
+
+	case ACPI_BUS_NUMBER_RANGE:
+
+		acpi_os_printf ("  Resource Type: Bus Number Range\n");
+		break;
+
+	default:
+
+		acpi_os_printf ("  Resource Type: 0x%2.2X\n", address32_data->resource_type);
+		break;
+	}
+
+	acpi_os_printf ("  Resource %s\n",
+			 ACPI_CONSUMER == address32_data->producer_consumer ?
+			 "Consumer" : "Producer");
+
+	acpi_os_printf ("  %s decode\n",
+			 ACPI_SUB_DECODE == address32_data->decode ?
+			 "Subtractive" : "Positive");
+
+	acpi_os_printf ("  Min address is %s fixed\n",
+			 ACPI_ADDRESS_FIXED == address32_data->min_address_fixed ?
+			 "" : "not ");
+
+	acpi_os_printf ("  Max address is %s fixed\n",
+			 ACPI_ADDRESS_FIXED == address32_data->max_address_fixed ?
+			 "" : "not ");
+
+	acpi_os_printf ("  Granularity: %08X\n",
+			 address32_data->granularity);
+
+	acpi_os_printf ("  Address range min: %08X\n",
+			 address32_data->min_address_range);
+
+	acpi_os_printf ("  Address range max: %08X\n",
+			 address32_data->max_address_range);
+
+	acpi_os_printf ("  Address translation offset: %08X\n",
+			 address32_data->address_translation_offset);
+
+	acpi_os_printf ("  Address Length: %08X\n",
+			 address32_data->address_length);
+
+	if(0xFF != address32_data->resource_source.index) {
+		acpi_os_printf ("  Resource Source Index: %X\n",
+				 address32_data->resource_source.index);
+		acpi_os_printf ("  Resource Source: %s\n",
+				 address32_data->resource_source.string_ptr);
+	}
+
+	return;
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_dump_address64
+ *
+ * PARAMETERS:  Data            - pointer to the resource structure to dump.
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Prints out the various members of the Data structure type.
+ *
+ ******************************************************************************/
+
+void
+acpi_rs_dump_address64 (
+	union acpi_resource_data        *data)
+{
+	struct acpi_resource_address64 *address64_data = (struct acpi_resource_address64 *) data;
+
+
+	ACPI_FUNCTION_ENTRY ();
+
+
+	acpi_os_printf ("64-Bit Address Space Resource\n");
+
+	switch (address64_data->resource_type) {
+	case ACPI_MEMORY_RANGE:
+
+		acpi_os_printf ("  Resource Type: Memory Range\n");
+
+		switch (address64_data->attribute.memory.cache_attribute) {
+		case ACPI_NON_CACHEABLE_MEMORY:
+			acpi_os_printf ("  Type Specific: "
+					  "Noncacheable memory\n");
+			break;
+
+		case ACPI_CACHABLE_MEMORY:
+			acpi_os_printf ("  Type Specific: "
+					  "Cacheable memory\n");
+			break;
+
+		case ACPI_WRITE_COMBINING_MEMORY:
+			acpi_os_printf ("  Type Specific: "
+					  "Write-combining memory\n");
+			break;
+
+		case ACPI_PREFETCHABLE_MEMORY:
+			acpi_os_printf ("  Type Specific: "
+					  "Prefetchable memory\n");
+			break;
+
+		default:
+			acpi_os_printf ("  Type Specific: "
+					  "Invalid cache attribute\n");
+			break;
+		}
+
+		acpi_os_printf ("  Type Specific: Read%s\n",
+			ACPI_READ_WRITE_MEMORY ==
+			address64_data->attribute.memory.read_write_attribute ?
+			"/Write" : " Only");
+		break;
+
+	case ACPI_IO_RANGE:
+
+		acpi_os_printf ("  Resource Type: Io Range\n");
+
+		switch (address64_data->attribute.io.range_attribute) {
+		case ACPI_NON_ISA_ONLY_RANGES:
+			acpi_os_printf ("  Type Specific: "
+					  "Non-ISA Io Addresses\n");
+			break;
+
+		case ACPI_ISA_ONLY_RANGES:
+			acpi_os_printf ("  Type Specific: "
+					  "ISA Io Addresses\n");
+			break;
+
+		case ACPI_ENTIRE_RANGE:
+			acpi_os_printf ("  Type Specific: "
+					  "ISA and non-ISA Io Addresses\n");
+			break;
+
+		default:
+			acpi_os_printf ("  Type Specific: "
+					  "Invalid Range attribute");
+			break;
+		}
+
+		acpi_os_printf ("  Type Specific: %s Translation\n",
+			ACPI_SPARSE_TRANSLATION ==
+			address64_data->attribute.io.translation_attribute ?
+			"Sparse" : "Dense");
+		break;
+
+	case ACPI_BUS_NUMBER_RANGE:
+
+		acpi_os_printf ("  Resource Type: Bus Number Range\n");
+		break;
+
+	default:
+
+		acpi_os_printf ("  Resource Type: 0x%2.2X\n", address64_data->resource_type);
+		break;
+	}
+
+	acpi_os_printf ("  Resource %s\n",
+			 ACPI_CONSUMER == address64_data->producer_consumer ?
+			 "Consumer" : "Producer");
+
+	acpi_os_printf ("  %s decode\n",
+			 ACPI_SUB_DECODE == address64_data->decode ?
+			 "Subtractive" : "Positive");
+
+	acpi_os_printf ("  Min address is %s fixed\n",
+			 ACPI_ADDRESS_FIXED == address64_data->min_address_fixed ?
+			 "" : "not ");
+
+	acpi_os_printf ("  Max address is %s fixed\n",
+			 ACPI_ADDRESS_FIXED == address64_data->max_address_fixed ?
+			 "" : "not ");
+
+	acpi_os_printf ("  Granularity: %8.8X%8.8X\n",
+			 ACPI_FORMAT_UINT64 (address64_data->granularity));
+
+	acpi_os_printf ("  Address range min: %8.8X%8.8X\n",
+			 ACPI_FORMAT_UINT64 (address64_data->min_address_range));
+
+	acpi_os_printf ("  Address range max: %8.8X%8.8X\n",
+			 ACPI_FORMAT_UINT64 (address64_data->max_address_range));
+
+	acpi_os_printf ("  Address translation offset: %8.8X%8.8X\n",
+			 ACPI_FORMAT_UINT64 (address64_data->address_translation_offset));
+
+	acpi_os_printf ("  Address Length: %8.8X%8.8X\n",
+			 ACPI_FORMAT_UINT64 (address64_data->address_length));
+
+	acpi_os_printf ("  Type Specific Attributes: %8.8X%8.8X\n",
+			 ACPI_FORMAT_UINT64 (address64_data->type_specific_attributes));
+
+	if (0xFF != address64_data->resource_source.index) {
+		acpi_os_printf ("  Resource Source Index: %X\n",
+				 address64_data->resource_source.index);
+		acpi_os_printf ("  Resource Source: %s\n",
+				 address64_data->resource_source.string_ptr);
+	}
+
+	return;
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_dump_extended_irq
+ *
+ * PARAMETERS:  Data            - pointer to the resource structure to dump.
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Prints out the various members of the Data structure type.
+ *
+ ******************************************************************************/
+
+void
+acpi_rs_dump_extended_irq (
+	union acpi_resource_data        *data)
+{
+	struct acpi_resource_ext_irq    *ext_irq_data = (struct acpi_resource_ext_irq *) data;
+	u8                              index = 0;
+
+
+	ACPI_FUNCTION_ENTRY ();
+
+
+	acpi_os_printf ("Extended IRQ Resource\n");
+
+	acpi_os_printf ("  Resource %s\n",
+			 ACPI_CONSUMER == ext_irq_data->producer_consumer ?
+			 "Consumer" : "Producer");
+
+	acpi_os_printf ("  %s\n",
+			 ACPI_LEVEL_SENSITIVE == ext_irq_data->edge_level ?
+			 "Level" : "Edge");
+
+	acpi_os_printf ("  Active %s\n",
+			 ACPI_ACTIVE_LOW == ext_irq_data->active_high_low ?
+			 "low" : "high");
+
+	acpi_os_printf ("  %s\n",
+			 ACPI_SHARED == ext_irq_data->shared_exclusive ?
+			 "Shared" : "Exclusive");
+
+	acpi_os_printf ("  Interrupts : %X ( ",
+			 ext_irq_data->number_of_interrupts);
+
+	for (index = 0; index < ext_irq_data->number_of_interrupts; index++) {
+		acpi_os_printf ("%X ", ext_irq_data->interrupts[index]);
+	}
+
+	acpi_os_printf (")\n");
+
+	if(0xFF != ext_irq_data->resource_source.index) {
+		acpi_os_printf ("  Resource Source Index: %X",
+				 ext_irq_data->resource_source.index);
+		acpi_os_printf ("  Resource Source: %s",
+				 ext_irq_data->resource_source.string_ptr);
+	}
+
+	return;
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_dump_resource_list
+ *
+ * PARAMETERS:  Data            - pointer to the resource structure to dump.
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Dispatches the structure to the correct dump routine.
+ *
+ ******************************************************************************/
+
+void
+acpi_rs_dump_resource_list (
+	struct acpi_resource        *resource)
+{
+	u8                          count = 0;
+	u8                          done = FALSE;
+
+
+	ACPI_FUNCTION_ENTRY ();
+
+
+	if (acpi_dbg_level & ACPI_LV_RESOURCES && _COMPONENT & acpi_dbg_layer) {
+		while (!done) {
+			acpi_os_printf ("Resource structure %X.\n", count++);
+
+			switch (resource->id) {
+			case ACPI_RSTYPE_IRQ:
+				acpi_rs_dump_irq (&resource->data);
+				break;
+
+			case ACPI_RSTYPE_DMA:
+				acpi_rs_dump_dma (&resource->data);
+				break;
+
+			case ACPI_RSTYPE_START_DPF:
+				acpi_rs_dump_start_depend_fns (&resource->data);
+				break;
+
+			case ACPI_RSTYPE_END_DPF:
+				acpi_os_printf ("end_dependent_functions Resource\n");
+				/* acpi_rs_dump_end_dependent_functions (Resource->Data);*/
+				break;
+
+			case ACPI_RSTYPE_IO:
+				acpi_rs_dump_io (&resource->data);
+				break;
+
+			case ACPI_RSTYPE_FIXED_IO:
+				acpi_rs_dump_fixed_io (&resource->data);
+				break;
+
+			case ACPI_RSTYPE_VENDOR:
+				acpi_rs_dump_vendor_specific (&resource->data);
+				break;
+
+			case ACPI_RSTYPE_END_TAG:
+				/*rs_dump_end_tag (Resource->Data);*/
+				acpi_os_printf ("end_tag Resource\n");
+				done = TRUE;
+				break;
+
+			case ACPI_RSTYPE_MEM24:
+				acpi_rs_dump_memory24 (&resource->data);
+				break;
+
+			case ACPI_RSTYPE_MEM32:
+				acpi_rs_dump_memory32 (&resource->data);
+				break;
+
+			case ACPI_RSTYPE_FIXED_MEM32:
+				acpi_rs_dump_fixed_memory32 (&resource->data);
+				break;
+
+			case ACPI_RSTYPE_ADDRESS16:
+				acpi_rs_dump_address16 (&resource->data);
+				break;
+
+			case ACPI_RSTYPE_ADDRESS32:
+				acpi_rs_dump_address32 (&resource->data);
+				break;
+
+			case ACPI_RSTYPE_ADDRESS64:
+				acpi_rs_dump_address64 (&resource->data);
+				break;
+
+			case ACPI_RSTYPE_EXT_IRQ:
+				acpi_rs_dump_extended_irq (&resource->data);
+				break;
+
+			default:
+				acpi_os_printf ("Invalid resource type\n");
+				break;
+
+			}
+
+			resource = ACPI_PTR_ADD (struct acpi_resource, resource, resource->length);
+		}
+	}
+
+	return;
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_dump_irq_list
+ *
+ * PARAMETERS:  Data            - pointer to the routing table to dump.
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Dispatches the structures to the correct dump routine.
+ *
+ ******************************************************************************/
+
+void
+acpi_rs_dump_irq_list (
+	u8                              *route_table)
+{
+	u8                              *buffer = route_table;
+	u8                              count = 0;
+	u8                              done = FALSE;
+	struct acpi_pci_routing_table   *prt_element;
+
+
+	ACPI_FUNCTION_ENTRY ();
+
+
+	if (acpi_dbg_level & ACPI_LV_RESOURCES && _COMPONENT & acpi_dbg_layer) {
+		prt_element = ACPI_CAST_PTR (struct acpi_pci_routing_table, buffer);
+
+		while (!done) {
+			acpi_os_printf ("PCI IRQ Routing Table structure %X.\n", count++);
+
+			acpi_os_printf ("  Address: %8.8X%8.8X\n",
+					 ACPI_FORMAT_UINT64 (prt_element->address));
+
+			acpi_os_printf ("  Pin: %X\n", prt_element->pin);
+
+			acpi_os_printf ("  Source: %s\n", prt_element->source);
+
+			acpi_os_printf ("  source_index: %X\n",
+					 prt_element->source_index);
+
+			buffer += prt_element->length;
+
+			prt_element = ACPI_CAST_PTR (struct acpi_pci_routing_table, buffer);
+
+			if(0 == prt_element->length) {
+				done = TRUE;
+			}
+		}
+	}
+
+	return;
+}
+
+#endif
+
diff --git a/drivers/acpi/resources/rsio.c b/drivers/acpi/resources/rsio.c
new file mode 100644
index 0000000..972c746
--- /dev/null
+++ b/drivers/acpi/resources/rsio.c
@@ -0,0 +1,545 @@
+/*******************************************************************************
+ *
+ * Module Name: rsio - IO and DMA resource descriptors
+ *
+ ******************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#include <acpi/acpi.h>
+#include <acpi/acresrc.h>
+
+#define _COMPONENT          ACPI_RESOURCES
+	 ACPI_MODULE_NAME    ("rsio")
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_io_resource
+ *
+ * PARAMETERS:  byte_stream_buffer      - Pointer to the resource input byte
+ *                                        stream
+ *              bytes_consumed          - Pointer to where the number of bytes
+ *                                        consumed the byte_stream_buffer is
+ *                                        returned
+ *              output_buffer           - Pointer to the return data buffer
+ *              structure_size          - Pointer to where the number of bytes
+ *                                        in the return data struct is returned
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Take the resource byte stream and fill out the appropriate
+ *              structure pointed to by the output_buffer. Return the
+ *              number of bytes consumed from the byte stream.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_rs_io_resource (
+	u8                              *byte_stream_buffer,
+	acpi_size                       *bytes_consumed,
+	u8                              **output_buffer,
+	acpi_size                       *structure_size)
+{
+	u8                              *buffer = byte_stream_buffer;
+	struct acpi_resource            *output_struct = (void *) *output_buffer;
+	u16                             temp16 = 0;
+	u8                              temp8 = 0;
+	acpi_size                       struct_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_io);
+
+
+	ACPI_FUNCTION_TRACE ("rs_io_resource");
+
+
+	/*
+	 * The number of bytes consumed are Constant
+	 */
+	*bytes_consumed = 8;
+
+	output_struct->id = ACPI_RSTYPE_IO;
+
+	/*
+	 * Check Decode
+	 */
+	buffer += 1;
+	temp8 = *buffer;
+
+	output_struct->data.io.io_decode = temp8 & 0x01;
+
+	/*
+	 * Check min_base Address
+	 */
+	buffer += 1;
+	ACPI_MOVE_16_TO_16 (&temp16, buffer);
+
+	output_struct->data.io.min_base_address = temp16;
+
+	/*
+	 * Check max_base Address
+	 */
+	buffer += 2;
+	ACPI_MOVE_16_TO_16 (&temp16, buffer);
+
+	output_struct->data.io.max_base_address = temp16;
+
+	/*
+	 * Check Base alignment
+	 */
+	buffer += 2;
+	temp8 = *buffer;
+
+	output_struct->data.io.alignment = temp8;
+
+	/*
+	 * Check range_length
+	 */
+	buffer += 1;
+	temp8 = *buffer;
+
+	output_struct->data.io.range_length = temp8;
+
+	/*
+	 * Set the Length parameter
+	 */
+	output_struct->length = (u32) struct_size;
+
+	/*
+	 * Return the final size of the structure
+	 */
+	*structure_size = struct_size;
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_fixed_io_resource
+ *
+ * PARAMETERS:  byte_stream_buffer      - Pointer to the resource input byte
+ *                                        stream
+ *              bytes_consumed          - Pointer to where the number of bytes
+ *                                        consumed the byte_stream_buffer is
+ *                                        returned
+ *              output_buffer           - Pointer to the return data buffer
+ *              structure_size          - Pointer to where the number of bytes
+ *                                        in the return data struct is returned
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Take the resource byte stream and fill out the appropriate
+ *              structure pointed to by the output_buffer. Return the
+ *              number of bytes consumed from the byte stream.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_rs_fixed_io_resource (
+	u8                              *byte_stream_buffer,
+	acpi_size                       *bytes_consumed,
+	u8                              **output_buffer,
+	acpi_size                       *structure_size)
+{
+	u8                              *buffer = byte_stream_buffer;
+	struct acpi_resource            *output_struct = (void *) *output_buffer;
+	u16                             temp16 = 0;
+	u8                              temp8 = 0;
+	acpi_size                       struct_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_fixed_io);
+
+
+	ACPI_FUNCTION_TRACE ("rs_fixed_io_resource");
+
+
+	/*
+	 * The number of bytes consumed are Constant
+	 */
+	*bytes_consumed = 4;
+
+	output_struct->id = ACPI_RSTYPE_FIXED_IO;
+
+	/*
+	 * Check Range Base Address
+	 */
+	buffer += 1;
+	ACPI_MOVE_16_TO_16 (&temp16, buffer);
+
+	output_struct->data.fixed_io.base_address = temp16;
+
+	/*
+	 * Check range_length
+	 */
+	buffer += 2;
+	temp8 = *buffer;
+
+	output_struct->data.fixed_io.range_length = temp8;
+
+	/*
+	 * Set the Length parameter
+	 */
+	output_struct->length = (u32) struct_size;
+
+	/*
+	 * Return the final size of the structure
+	 */
+	*structure_size = struct_size;
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_io_stream
+ *
+ * PARAMETERS:  linked_list             - Pointer to the resource linked list
+ *              output_buffer           - Pointer to the user's return buffer
+ *              bytes_consumed          - Pointer to where the number of bytes
+ *                                        used in the output_buffer is returned
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Take the linked list resource structure and fills in the
+ *              the appropriate bytes in a byte stream
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_rs_io_stream (
+	struct acpi_resource            *linked_list,
+	u8                              **output_buffer,
+	acpi_size                       *bytes_consumed)
+{
+	u8                              *buffer = *output_buffer;
+	u16                             temp16 = 0;
+	u8                              temp8 = 0;
+
+
+	ACPI_FUNCTION_TRACE ("rs_io_stream");
+
+
+	/*
+	 * The descriptor field is static
+	 */
+	*buffer = 0x47;
+	buffer += 1;
+
+	/*
+	 * Io Information Byte
+	 */
+	temp8 = (u8) (linked_list->data.io.io_decode & 0x01);
+
+	*buffer = temp8;
+	buffer += 1;
+
+	/*
+	 * Set the Range minimum base address
+	 */
+	temp16 = (u16) linked_list->data.io.min_base_address;
+
+	ACPI_MOVE_16_TO_16 (buffer, &temp16);
+	buffer += 2;
+
+	/*
+	 * Set the Range maximum base address
+	 */
+	temp16 = (u16) linked_list->data.io.max_base_address;
+
+	ACPI_MOVE_16_TO_16 (buffer, &temp16);
+	buffer += 2;
+
+	/*
+	 * Set the base alignment
+	 */
+	temp8 = (u8) linked_list->data.io.alignment;
+
+	*buffer = temp8;
+	buffer += 1;
+
+	/*
+	 * Set the range length
+	 */
+	temp8 = (u8) linked_list->data.io.range_length;
+
+	*buffer = temp8;
+	buffer += 1;
+
+	/*
+	 * Return the number of bytes consumed in this operation
+	 */
+	*bytes_consumed = ACPI_PTR_DIFF (buffer, *output_buffer);
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_fixed_io_stream
+ *
+ * PARAMETERS:  linked_list             - Pointer to the resource linked list
+ *              output_buffer           - Pointer to the user's return buffer
+ *              bytes_consumed          - Pointer to where the number of bytes
+ *                                        used in the output_buffer is returned
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Take the linked list resource structure and fills in the
+ *              the appropriate bytes in a byte stream
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_rs_fixed_io_stream (
+	struct acpi_resource            *linked_list,
+	u8                              **output_buffer,
+	acpi_size                       *bytes_consumed)
+{
+	u8                              *buffer = *output_buffer;
+	u16                             temp16 = 0;
+	u8                              temp8 = 0;
+
+
+	ACPI_FUNCTION_TRACE ("rs_fixed_io_stream");
+
+
+	/*
+	 * The descriptor field is static
+	 */
+	*buffer = 0x4B;
+
+	buffer += 1;
+
+	/*
+	 * Set the Range base address
+	 */
+	temp16 = (u16) linked_list->data.fixed_io.base_address;
+
+	ACPI_MOVE_16_TO_16 (buffer, &temp16);
+	buffer += 2;
+
+	/*
+	 * Set the range length
+	 */
+	temp8 = (u8) linked_list->data.fixed_io.range_length;
+
+	*buffer = temp8;
+	buffer += 1;
+
+	/*
+	 * Return the number of bytes consumed in this operation
+	 */
+	*bytes_consumed = ACPI_PTR_DIFF (buffer, *output_buffer);
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_dma_resource
+ *
+ * PARAMETERS:  byte_stream_buffer      - Pointer to the resource input byte
+ *                                        stream
+ *              bytes_consumed          - Pointer to where the number of bytes
+ *                                        consumed the byte_stream_buffer is
+ *                                        returned
+ *              output_buffer           - Pointer to the return data buffer
+ *              structure_size          - Pointer to where the number of bytes
+ *                                        in the return data struct is returned
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Take the resource byte stream and fill out the appropriate
+ *              structure pointed to by the output_buffer. Return the
+ *              number of bytes consumed from the byte stream.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_rs_dma_resource (
+	u8                              *byte_stream_buffer,
+	acpi_size                       *bytes_consumed,
+	u8                              **output_buffer,
+	acpi_size                       *structure_size)
+{
+	u8                              *buffer = byte_stream_buffer;
+	struct acpi_resource            *output_struct = (void *) *output_buffer;
+	u8                              temp8 = 0;
+	u8                              index;
+	u8                              i;
+	acpi_size                       struct_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_dma);
+
+
+	ACPI_FUNCTION_TRACE ("rs_dma_resource");
+
+
+	/*
+	 * The number of bytes consumed are Constant
+	 */
+	*bytes_consumed = 3;
+	output_struct->id = ACPI_RSTYPE_DMA;
+
+	/*
+	 * Point to the 8-bits of Byte 1
+	 */
+	buffer += 1;
+	temp8 = *buffer;
+
+	/* Decode the DMA channel bits */
+
+	for (i = 0, index = 0; index < 8; index++) {
+		if ((temp8 >> index) & 0x01) {
+			output_struct->data.dma.channels[i] = index;
+			i++;
+		}
+	}
+
+	/* Zero DMA channels is valid */
+
+	output_struct->data.dma.number_of_channels = i;
+	if (i > 0) {
+		/*
+		 * Calculate the structure size based upon the number of interrupts
+		 */
+		struct_size += ((acpi_size) i - 1) * 4;
+	}
+
+	/*
+	 * Point to Byte 2
+	 */
+	buffer += 1;
+	temp8 = *buffer;
+
+	/*
+	 * Check for transfer preference (Bits[1:0])
+	 */
+	output_struct->data.dma.transfer = temp8 & 0x03;
+
+	if (0x03 == output_struct->data.dma.transfer) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Invalid DMA.Transfer preference (3)\n"));
+		return_ACPI_STATUS (AE_BAD_DATA);
+	}
+
+	/*
+	 * Get bus master preference (Bit[2])
+	 */
+	output_struct->data.dma.bus_master = (temp8 >> 2) & 0x01;
+
+	/*
+	 * Get channel speed support (Bits[6:5])
+	 */
+	output_struct->data.dma.type = (temp8 >> 5) & 0x03;
+
+	/*
+	 * Set the Length parameter
+	 */
+	output_struct->length = (u32) struct_size;
+
+	/*
+	 * Return the final size of the structure
+	 */
+	*structure_size = struct_size;
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_dma_stream
+ *
+ * PARAMETERS:  linked_list             - Pointer to the resource linked list
+ *              output_buffer           - Pointer to the user's return buffer
+ *              bytes_consumed          - Pointer to where the number of bytes
+ *                                        used in the output_buffer is returned
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Take the linked list resource structure and fills in the
+ *              the appropriate bytes in a byte stream
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_rs_dma_stream (
+	struct acpi_resource            *linked_list,
+	u8                              **output_buffer,
+	acpi_size                       *bytes_consumed)
+{
+	u8                              *buffer = *output_buffer;
+	u16                             temp16 = 0;
+	u8                              temp8 = 0;
+	u8                              index;
+
+
+	ACPI_FUNCTION_TRACE ("rs_dma_stream");
+
+
+	/*
+	 * The descriptor field is static
+	 */
+	*buffer = 0x2A;
+	buffer += 1;
+	temp8 = 0;
+
+	/*
+	 * Loop through all of the Channels and set the mask bits
+	 */
+	for (index = 0;
+		 index < linked_list->data.dma.number_of_channels;
+		 index++) {
+		temp16 = (u16) linked_list->data.dma.channels[index];
+		temp8 |= 0x1 << temp16;
+	}
+
+	*buffer = temp8;
+	buffer += 1;
+
+	/*
+	 * Set the DMA Info
+	 */
+	temp8 = (u8) ((linked_list->data.dma.type & 0x03) << 5);
+	temp8 |= ((linked_list->data.dma.bus_master & 0x01) << 2);
+	temp8 |= (linked_list->data.dma.transfer & 0x03);
+
+	*buffer = temp8;
+	buffer += 1;
+
+	/*
+	 * Return the number of bytes consumed in this operation
+	 */
+	*bytes_consumed = ACPI_PTR_DIFF (buffer, *output_buffer);
+	return_ACPI_STATUS (AE_OK);
+}
+
diff --git a/drivers/acpi/resources/rsirq.c b/drivers/acpi/resources/rsirq.c
new file mode 100644
index 0000000..fd07a87
--- /dev/null
+++ b/drivers/acpi/resources/rsirq.c
@@ -0,0 +1,592 @@
+/*******************************************************************************
+ *
+ * Module Name: rsirq - IRQ resource descriptors
+ *
+ ******************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#include <acpi/acpi.h>
+#include <acpi/acresrc.h>
+
+#define _COMPONENT          ACPI_RESOURCES
+	 ACPI_MODULE_NAME    ("rsirq")
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_irq_resource
+ *
+ * PARAMETERS:  byte_stream_buffer      - Pointer to the resource input byte
+ *                                        stream
+ *              bytes_consumed          - Pointer to where the number of bytes
+ *                                        consumed the byte_stream_buffer is
+ *                                        returned
+ *              output_buffer           - Pointer to the return data buffer
+ *              structure_size          - Pointer to where the number of bytes
+ *                                        in the return data struct is returned
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Take the resource byte stream and fill out the appropriate
+ *              structure pointed to by the output_buffer. Return the
+ *              number of bytes consumed from the byte stream.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_rs_irq_resource (
+	u8                              *byte_stream_buffer,
+	acpi_size                       *bytes_consumed,
+	u8                              **output_buffer,
+	acpi_size                       *structure_size)
+{
+	u8                              *buffer = byte_stream_buffer;
+	struct acpi_resource            *output_struct = (void *) *output_buffer;
+	u16                             temp16 = 0;
+	u8                              temp8 = 0;
+	u8                              index;
+	u8                              i;
+	acpi_size                       struct_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_irq);
+
+
+	ACPI_FUNCTION_TRACE ("rs_irq_resource");
+
+
+	/*
+	 * The number of bytes consumed are contained in the descriptor
+	 *  (Bits:0-1)
+	 */
+	temp8 = *buffer;
+	*bytes_consumed = (temp8 & 0x03) + 1;
+	output_struct->id = ACPI_RSTYPE_IRQ;
+
+	/*
+	 * Point to the 16-bits of Bytes 1 and 2
+	 */
+	buffer += 1;
+	ACPI_MOVE_16_TO_16 (&temp16, buffer);
+
+	output_struct->data.irq.number_of_interrupts = 0;
+
+	/* Decode the IRQ bits */
+
+	for (i = 0, index = 0; index < 16; index++) {
+		if ((temp16 >> index) & 0x01) {
+			output_struct->data.irq.interrupts[i] = index;
+			i++;
+		}
+	}
+
+	/* Zero interrupts is valid */
+
+	output_struct->data.irq.number_of_interrupts = i;
+	if (i > 0) {
+		/*
+		 * Calculate the structure size based upon the number of interrupts
+		 */
+		struct_size += ((acpi_size) i - 1) * 4;
+	}
+
+	/*
+	 * Point to Byte 3 if it is used
+	 */
+	if (4 == *bytes_consumed) {
+		buffer += 2;
+		temp8 = *buffer;
+
+		/*
+		 * Check for HE, LL interrupts
+		 */
+		switch (temp8 & 0x09) {
+		case 0x01: /* HE */
+			output_struct->data.irq.edge_level = ACPI_EDGE_SENSITIVE;
+			output_struct->data.irq.active_high_low = ACPI_ACTIVE_HIGH;
+			break;
+
+		case 0x08: /* LL */
+			output_struct->data.irq.edge_level = ACPI_LEVEL_SENSITIVE;
+			output_struct->data.irq.active_high_low = ACPI_ACTIVE_LOW;
+			break;
+
+		default:
+			/*
+			 * Only _LL and _HE polarity/trigger interrupts
+			 * are allowed (ACPI spec, section "IRQ Format")
+			 * so 0x00 and 0x09 are illegal.
+			 */
+			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
+				"Invalid interrupt polarity/trigger in resource list, %X\n", temp8));
+			return_ACPI_STATUS (AE_BAD_DATA);
+		}
+
+		/*
+		 * Check for sharable
+		 */
+		output_struct->data.irq.shared_exclusive = (temp8 >> 3) & 0x01;
+	}
+	else {
+		/*
+		 * Assume Edge Sensitive, Active High, Non-Sharable
+		 * per ACPI Specification
+		 */
+		output_struct->data.irq.edge_level = ACPI_EDGE_SENSITIVE;
+		output_struct->data.irq.active_high_low = ACPI_ACTIVE_HIGH;
+		output_struct->data.irq.shared_exclusive = ACPI_EXCLUSIVE;
+	}
+
+	/*
+	 * Set the Length parameter
+	 */
+	output_struct->length = (u32) struct_size;
+
+	/*
+	 * Return the final size of the structure
+	 */
+	*structure_size = struct_size;
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_irq_stream
+ *
+ * PARAMETERS:  linked_list             - Pointer to the resource linked list
+ *              output_buffer           - Pointer to the user's return buffer
+ *              bytes_consumed          - Pointer to where the number of bytes
+ *                                        used in the output_buffer is returned
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Take the linked list resource structure and fills in the
+ *              the appropriate bytes in a byte stream
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_rs_irq_stream (
+	struct acpi_resource            *linked_list,
+	u8                              **output_buffer,
+	acpi_size                       *bytes_consumed)
+{
+	u8                              *buffer = *output_buffer;
+	u16                             temp16 = 0;
+	u8                              temp8 = 0;
+	u8                              index;
+	u8                              IRqinfo_byte_needed;
+
+
+	ACPI_FUNCTION_TRACE ("rs_irq_stream");
+
+
+	/*
+	 * The descriptor field is set based upon whether a third byte is
+	 * needed to contain the IRQ Information.
+	 */
+	if (ACPI_EDGE_SENSITIVE == linked_list->data.irq.edge_level &&
+		ACPI_ACTIVE_HIGH == linked_list->data.irq.active_high_low &&
+		ACPI_EXCLUSIVE == linked_list->data.irq.shared_exclusive) {
+		*buffer = 0x22;
+		IRqinfo_byte_needed = FALSE;
+	}
+	else {
+		*buffer = 0x23;
+		IRqinfo_byte_needed = TRUE;
+	}
+
+	buffer += 1;
+	temp16 = 0;
+
+	/*
+	 * Loop through all of the interrupts and set the mask bits
+	 */
+	for(index = 0;
+		index < linked_list->data.irq.number_of_interrupts;
+		index++) {
+		temp8 = (u8) linked_list->data.irq.interrupts[index];
+		temp16 |= 0x1 << temp8;
+	}
+
+	ACPI_MOVE_16_TO_16 (buffer, &temp16);
+	buffer += 2;
+
+	/*
+	 * Set the IRQ Info byte if needed.
+	 */
+	if (IRqinfo_byte_needed) {
+		temp8 = 0;
+		temp8 = (u8) ((linked_list->data.irq.shared_exclusive &
+				 0x01) << 4);
+
+		if (ACPI_LEVEL_SENSITIVE == linked_list->data.irq.edge_level &&
+			ACPI_ACTIVE_LOW == linked_list->data.irq.active_high_low) {
+			temp8 |= 0x08;
+		}
+		else {
+			temp8 |= 0x01;
+		}
+
+		*buffer = temp8;
+		buffer += 1;
+	}
+
+	/*
+	 * Return the number of bytes consumed in this operation
+	 */
+	*bytes_consumed = ACPI_PTR_DIFF (buffer, *output_buffer);
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_extended_irq_resource
+ *
+ * PARAMETERS:  byte_stream_buffer      - Pointer to the resource input byte
+ *                                        stream
+ *              bytes_consumed          - Pointer to where the number of bytes
+ *                                        consumed the byte_stream_buffer is
+ *                                        returned
+ *              output_buffer           - Pointer to the return data buffer
+ *              structure_size          - Pointer to where the number of bytes
+ *                                        in the return data struct is returned
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Take the resource byte stream and fill out the appropriate
+ *              structure pointed to by the output_buffer. Return the
+ *              number of bytes consumed from the byte stream.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_rs_extended_irq_resource (
+	u8                              *byte_stream_buffer,
+	acpi_size                       *bytes_consumed,
+	u8                              **output_buffer,
+	acpi_size                       *structure_size)
+{
+	u8                              *buffer = byte_stream_buffer;
+	struct acpi_resource            *output_struct = (void *) *output_buffer;
+	u16                             temp16 = 0;
+	u8                              temp8 = 0;
+	u8                              *temp_ptr;
+	u8                              index;
+	acpi_size                       struct_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_ext_irq);
+
+
+	ACPI_FUNCTION_TRACE ("rs_extended_irq_resource");
+
+
+	/*
+	 * Point past the Descriptor to get the number of bytes consumed
+	 */
+	buffer += 1;
+	ACPI_MOVE_16_TO_16 (&temp16, buffer);
+
+	/* Validate minimum descriptor length */
+
+	if (temp16 < 6) {
+		return_ACPI_STATUS (AE_AML_BAD_RESOURCE_LENGTH);
+	}
+
+	*bytes_consumed = temp16 + 3;
+	output_struct->id = ACPI_RSTYPE_EXT_IRQ;
+
+	/*
+	 * Point to the Byte3
+	 */
+	buffer += 2;
+	temp8 = *buffer;
+
+	output_struct->data.extended_irq.producer_consumer = temp8 & 0x01;
+
+	/*
+	 * Check for Interrupt Mode
+	 *
+	 * The definition of an Extended IRQ changed between ACPI spec v1.0b
+	 * and ACPI spec 2.0 (section 6.4.3.6 in both).
+	 *
+	 * - Edge/Level are defined opposite in the table vs the headers
+	 */
+	output_struct->data.extended_irq.edge_level =
+			   (temp8 & 0x2) ? ACPI_EDGE_SENSITIVE : ACPI_LEVEL_SENSITIVE;
+
+	/*
+	 * Check Interrupt Polarity
+	 */
+	output_struct->data.extended_irq.active_high_low = (temp8 >> 2) & 0x1;
+
+	/*
+	 * Check for sharable
+	 */
+	output_struct->data.extended_irq.shared_exclusive = (temp8 >> 3) & 0x01;
+
+	/*
+	 * Point to Byte4 (IRQ Table length)
+	 */
+	buffer += 1;
+	temp8 = *buffer;
+
+	/* Must have at least one IRQ */
+
+	if (temp8 < 1) {
+		return_ACPI_STATUS (AE_AML_BAD_RESOURCE_LENGTH);
+	}
+
+	output_struct->data.extended_irq.number_of_interrupts = temp8;
+
+	/*
+	 * Add any additional structure size to properly calculate
+	 * the next pointer at the end of this function
+	 */
+	struct_size += (temp8 - 1) * 4;
+
+	/*
+	 * Point to Byte5 (First IRQ Number)
+	 */
+	buffer += 1;
+
+	/*
+	 * Cycle through every IRQ in the table
+	 */
+	for (index = 0; index < temp8; index++) {
+		ACPI_MOVE_32_TO_32 (
+			&output_struct->data.extended_irq.interrupts[index], buffer);
+
+		/* Point to the next IRQ */
+
+		buffer += 4;
+	}
+
+	/*
+	 * This will leave us pointing to the Resource Source Index
+	 * If it is present, then save it off and calculate the
+	 * pointer to where the null terminated string goes:
+	 * Each Interrupt takes 32-bits + the 5 bytes of the
+	 * stream that are default.
+	 *
+	 * Note: Some resource descriptors will have an additional null, so
+	 * we add 1 to the length.
+	 */
+	if (*bytes_consumed >
+		((acpi_size) output_struct->data.extended_irq.number_of_interrupts * 4) + (5 + 1)) {
+		/* Dereference the Index */
+
+		temp8 = *buffer;
+		output_struct->data.extended_irq.resource_source.index = (u32) temp8;
+
+		/* Point to the String */
+
+		buffer += 1;
+
+		/*
+		 * Point the String pointer to the end of this structure.
+		 */
+		output_struct->data.extended_irq.resource_source.string_ptr =
+				(char *)((char *) output_struct + struct_size);
+
+		temp_ptr = (u8 *) output_struct->data.extended_irq.resource_source.string_ptr;
+
+		/* Copy the string into the buffer */
+
+		index = 0;
+		while (0x00 != *buffer) {
+			*temp_ptr = *buffer;
+
+			temp_ptr += 1;
+			buffer += 1;
+			index += 1;
+		}
+
+		/*
+		 * Add the terminating null
+		 */
+		*temp_ptr = 0x00;
+		output_struct->data.extended_irq.resource_source.string_length = index + 1;
+
+		/*
+		 * In order for the struct_size to fall on a 32-bit boundary,
+		 * calculate the length of the string and expand the
+		 * struct_size to the next 32-bit boundary.
+		 */
+		temp8 = (u8) (index + 1);
+		struct_size += ACPI_ROUND_UP_to_32_bITS (temp8);
+	}
+	else {
+		output_struct->data.extended_irq.resource_source.index = 0x00;
+		output_struct->data.extended_irq.resource_source.string_length = 0;
+		output_struct->data.extended_irq.resource_source.string_ptr = NULL;
+	}
+
+	/*
+	 * Set the Length parameter
+	 */
+	output_struct->length = (u32) struct_size;
+
+	/*
+	 * Return the final size of the structure
+	 */
+	*structure_size = struct_size;
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_extended_irq_stream
+ *
+ * PARAMETERS:  linked_list             - Pointer to the resource linked list
+ *              output_buffer           - Pointer to the user's return buffer
+ *              bytes_consumed          - Pointer to where the number of bytes
+ *                                        used in the output_buffer is returned
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Take the linked list resource structure and fills in the
+ *              the appropriate bytes in a byte stream
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_rs_extended_irq_stream (
+	struct acpi_resource            *linked_list,
+	u8                              **output_buffer,
+	acpi_size                       *bytes_consumed)
+{
+	u8                              *buffer = *output_buffer;
+	u16                             *length_field;
+	u8                              temp8 = 0;
+	u8                              index;
+	char                            *temp_pointer = NULL;
+
+
+	ACPI_FUNCTION_TRACE ("rs_extended_irq_stream");
+
+
+	/*
+	 * The descriptor field is static
+	 */
+	*buffer = 0x89;
+	buffer += 1;
+
+	/*
+	 * Set a pointer to the Length field - to be filled in later
+	 */
+	length_field = ACPI_CAST_PTR (u16, buffer);
+	buffer += 2;
+
+	/*
+	 * Set the Interrupt vector flags
+	 */
+	temp8 = (u8)(linked_list->data.extended_irq.producer_consumer & 0x01);
+	temp8 |= ((linked_list->data.extended_irq.shared_exclusive & 0x01) << 3);
+
+	/*
+	 * Set the Interrupt Mode
+	 *
+	 * The definition of an Extended IRQ changed between ACPI spec v1.0b
+	 * and ACPI spec 2.0 (section 6.4.3.6 in both).  This code does not
+	 * implement the more restrictive definition of 1.0b
+	 *
+	 * - Edge/Level are defined opposite in the table vs the headers
+	 */
+	if (ACPI_EDGE_SENSITIVE == linked_list->data.extended_irq.edge_level) {
+		temp8 |= 0x2;
+	}
+
+	/*
+	 * Set the Interrupt Polarity
+	 */
+	temp8 |= ((linked_list->data.extended_irq.active_high_low & 0x1) << 2);
+
+	*buffer = temp8;
+	buffer += 1;
+
+	/*
+	 * Set the Interrupt table length
+	 */
+	temp8 = (u8) linked_list->data.extended_irq.number_of_interrupts;
+
+	*buffer = temp8;
+	buffer += 1;
+
+	for (index = 0; index < linked_list->data.extended_irq.number_of_interrupts;
+		 index++) {
+		ACPI_MOVE_32_TO_32 (buffer,
+				  &linked_list->data.extended_irq.interrupts[index]);
+		buffer += 4;
+	}
+
+	/*
+	 * Resource Source Index and Resource Source are optional
+	 */
+	if (0 != linked_list->data.extended_irq.resource_source.string_length) {
+		*buffer = (u8) linked_list->data.extended_irq.resource_source.index;
+		buffer += 1;
+
+		temp_pointer = (char *) buffer;
+
+		/*
+		 * Copy the string
+		 */
+		ACPI_STRCPY (temp_pointer,
+			linked_list->data.extended_irq.resource_source.string_ptr);
+
+		/*
+		 * Buffer needs to be set to the length of the sting + one for the
+		 * terminating null
+		 */
+		buffer += (acpi_size)(ACPI_STRLEN (linked_list->data.extended_irq.resource_source.string_ptr) + 1);
+	}
+
+	/*
+	 * Return the number of bytes consumed in this operation
+	 */
+	*bytes_consumed = ACPI_PTR_DIFF (buffer, *output_buffer);
+
+	/*
+	 * Set the length field to the number of bytes consumed
+	 * minus the header size (3 bytes)
+	 */
+	*length_field = (u16) (*bytes_consumed - 3);
+	return_ACPI_STATUS (AE_OK);
+}
+
diff --git a/drivers/acpi/resources/rslist.c b/drivers/acpi/resources/rslist.c
new file mode 100644
index 0000000..e49c1e0
--- /dev/null
+++ b/drivers/acpi/resources/rslist.c
@@ -0,0 +1,518 @@
+/*******************************************************************************
+ *
+ * Module Name: rslist - Linked list utilities
+ *
+ ******************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#include <acpi/acpi.h>
+#include <acpi/acresrc.h>
+
+#define _COMPONENT          ACPI_RESOURCES
+	 ACPI_MODULE_NAME    ("rslist")
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_get_resource_type
+ *
+ * PARAMETERS:  resource_start_byte     - Byte 0 of a resource descriptor
+ *
+ * RETURN:      The Resource Type (Name) with no extraneous bits
+ *
+ * DESCRIPTION: Extract the Resource Type/Name from the first byte of
+ *              a resource descriptor.
+ *
+ ******************************************************************************/
+
+u8
+acpi_rs_get_resource_type (
+	u8                              resource_start_byte)
+{
+
+	ACPI_FUNCTION_ENTRY ();
+
+
+	/*
+	 * Determine if this is a small or large resource
+	 */
+	switch (resource_start_byte & ACPI_RDESC_TYPE_MASK) {
+	case ACPI_RDESC_TYPE_SMALL:
+
+		/*
+		 * Small Resource Type -- Only bits 6:3 are valid
+		 */
+		return ((u8) (resource_start_byte & ACPI_RDESC_SMALL_MASK));
+
+
+	case ACPI_RDESC_TYPE_LARGE:
+
+		/*
+		 * Large Resource Type -- All bits are valid
+		 */
+		return (resource_start_byte);
+
+
+	default:
+		/* No other types of resource descriptor */
+		break;
+	}
+
+	return (0xFF);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_byte_stream_to_list
+ *
+ * PARAMETERS:  byte_stream_buffer      - Pointer to the resource byte stream
+ *              byte_stream_buffer_length - Length of byte_stream_buffer
+ *              output_buffer           - Pointer to the buffer that will
+ *                                        contain the output structures
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Takes the resource byte stream and parses it, creating a
+ *              linked list of resources in the caller's output buffer
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_rs_byte_stream_to_list (
+	u8                              *byte_stream_buffer,
+	u32                             byte_stream_buffer_length,
+	u8                              *output_buffer)
+{
+	acpi_status                     status;
+	acpi_size                       bytes_parsed = 0;
+	u8                              resource_type = 0;
+	acpi_size                       bytes_consumed = 0;
+	u8                              *buffer = output_buffer;
+	acpi_size                       structure_size = 0;
+	u8                              end_tag_processed = FALSE;
+	struct acpi_resource            *resource;
+
+	ACPI_FUNCTION_TRACE ("rs_byte_stream_to_list");
+
+
+	while (bytes_parsed < byte_stream_buffer_length &&
+			!end_tag_processed) {
+		/*
+		 * The next byte in the stream is the resource type
+		 */
+		resource_type = acpi_rs_get_resource_type (*byte_stream_buffer);
+
+		switch (resource_type) {
+		case ACPI_RDESC_TYPE_MEMORY_24:
+			/*
+			 * 24-Bit Memory Resource
+			 */
+			status = acpi_rs_memory24_resource (byte_stream_buffer,
+					 &bytes_consumed, &buffer, &structure_size);
+			break;
+
+
+		case ACPI_RDESC_TYPE_LARGE_VENDOR:
+			/*
+			 * Vendor Defined Resource
+			 */
+			status = acpi_rs_vendor_resource (byte_stream_buffer,
+					 &bytes_consumed, &buffer, &structure_size);
+			break;
+
+
+		case ACPI_RDESC_TYPE_MEMORY_32:
+			/*
+			 * 32-Bit Memory Range Resource
+			 */
+			status = acpi_rs_memory32_range_resource (byte_stream_buffer,
+					 &bytes_consumed, &buffer, &structure_size);
+			break;
+
+
+		case ACPI_RDESC_TYPE_FIXED_MEMORY_32:
+			/*
+			 * 32-Bit Fixed Memory Resource
+			 */
+			status = acpi_rs_fixed_memory32_resource (byte_stream_buffer,
+					 &bytes_consumed, &buffer, &structure_size);
+			break;
+
+
+		case ACPI_RDESC_TYPE_QWORD_ADDRESS_SPACE:
+		case ACPI_RDESC_TYPE_EXTENDED_ADDRESS_SPACE:
+			/*
+			 * 64-Bit Address Resource
+			 */
+			status = acpi_rs_address64_resource (byte_stream_buffer,
+					 &bytes_consumed, &buffer, &structure_size);
+			break;
+
+
+		case ACPI_RDESC_TYPE_DWORD_ADDRESS_SPACE:
+			/*
+			 * 32-Bit Address Resource
+			 */
+			status = acpi_rs_address32_resource (byte_stream_buffer,
+					 &bytes_consumed, &buffer, &structure_size);
+			break;
+
+
+		case ACPI_RDESC_TYPE_WORD_ADDRESS_SPACE:
+			/*
+			 * 16-Bit Address Resource
+			 */
+			status = acpi_rs_address16_resource (byte_stream_buffer,
+					 &bytes_consumed, &buffer, &structure_size);
+			break;
+
+
+		case ACPI_RDESC_TYPE_EXTENDED_XRUPT:
+			/*
+			 * Extended IRQ
+			 */
+			status = acpi_rs_extended_irq_resource (byte_stream_buffer,
+					 &bytes_consumed, &buffer, &structure_size);
+			break;
+
+
+		case ACPI_RDESC_TYPE_IRQ_FORMAT:
+			/*
+			 * IRQ Resource
+			 */
+			status = acpi_rs_irq_resource (byte_stream_buffer,
+					 &bytes_consumed, &buffer, &structure_size);
+			break;
+
+
+		case ACPI_RDESC_TYPE_DMA_FORMAT:
+			/*
+			 * DMA Resource
+			 */
+			status = acpi_rs_dma_resource (byte_stream_buffer,
+					 &bytes_consumed, &buffer, &structure_size);
+			break;
+
+
+		case ACPI_RDESC_TYPE_START_DEPENDENT:
+			/*
+			 * Start Dependent Functions Resource
+			 */
+			status = acpi_rs_start_depend_fns_resource (byte_stream_buffer,
+					 &bytes_consumed, &buffer, &structure_size);
+			break;
+
+
+		case ACPI_RDESC_TYPE_END_DEPENDENT:
+			/*
+			 * End Dependent Functions Resource
+			 */
+			status = acpi_rs_end_depend_fns_resource (byte_stream_buffer,
+					 &bytes_consumed, &buffer, &structure_size);
+			break;
+
+
+		case ACPI_RDESC_TYPE_IO_PORT:
+			/*
+			 * IO Port Resource
+			 */
+			status = acpi_rs_io_resource (byte_stream_buffer,
+					 &bytes_consumed, &buffer, &structure_size);
+			break;
+
+
+		case ACPI_RDESC_TYPE_FIXED_IO_PORT:
+			/*
+			 * Fixed IO Port Resource
+			 */
+			status = acpi_rs_fixed_io_resource (byte_stream_buffer,
+					 &bytes_consumed, &buffer, &structure_size);
+			break;
+
+
+		case ACPI_RDESC_TYPE_SMALL_VENDOR:
+			/*
+			 * Vendor Specific Resource
+			 */
+			status = acpi_rs_vendor_resource (byte_stream_buffer,
+					 &bytes_consumed, &buffer, &structure_size);
+			break;
+
+
+		case ACPI_RDESC_TYPE_END_TAG:
+			/*
+			 * End Tag
+			 */
+			end_tag_processed = TRUE;
+			status = acpi_rs_end_tag_resource (byte_stream_buffer,
+					 &bytes_consumed, &buffer, &structure_size);
+			break;
+
+
+		default:
+			/*
+			 * Invalid/Unknown resource type
+			 */
+			status = AE_AML_INVALID_RESOURCE_TYPE;
+			break;
+		}
+
+		if (ACPI_FAILURE (status)) {
+			return_ACPI_STATUS (status);
+		}
+
+		/*
+		 * Update the return value and counter
+		 */
+		bytes_parsed += bytes_consumed;
+
+		/*
+		 * Set the byte stream to point to the next resource
+		 */
+		byte_stream_buffer += bytes_consumed;
+
+		/*
+		 * Set the Buffer to the next structure
+		 */
+		resource = ACPI_CAST_PTR (struct acpi_resource, buffer);
+		resource->length = (u32) ACPI_ALIGN_RESOURCE_SIZE (resource->length);
+		buffer += ACPI_ALIGN_RESOURCE_SIZE (structure_size);
+
+	} /*  end while */
+
+	/*
+	 * Check the reason for exiting the while loop
+	 */
+	if (!end_tag_processed) {
+		return_ACPI_STATUS (AE_AML_NO_RESOURCE_END_TAG);
+	}
+
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_list_to_byte_stream
+ *
+ * PARAMETERS:  linked_list             - Pointer to the resource linked list
+ *              byte_steam_size_needed  - Calculated size of the byte stream
+ *                                        needed from calling
+ *                                        acpi_rs_get_byte_stream_length()
+ *                                        The size of the output_buffer is
+ *                                        guaranteed to be >=
+ *                                        byte_stream_size_needed
+ *              output_buffer           - Pointer to the buffer that will
+ *                                        contain the byte stream
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Takes the resource linked list and parses it, creating a
+ *              byte stream of resources in the caller's output buffer
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_rs_list_to_byte_stream (
+	struct acpi_resource            *linked_list,
+	acpi_size                       byte_stream_size_needed,
+	u8                              *output_buffer)
+{
+	acpi_status                     status;
+	u8                              *buffer = output_buffer;
+	acpi_size                       bytes_consumed = 0;
+	u8                              done = FALSE;
+
+
+	ACPI_FUNCTION_TRACE ("rs_list_to_byte_stream");
+
+
+	while (!done) {
+		switch (linked_list->id) {
+		case ACPI_RSTYPE_IRQ:
+			/*
+			 * IRQ Resource
+			 */
+			status = acpi_rs_irq_stream (linked_list, &buffer, &bytes_consumed);
+			break;
+
+		case ACPI_RSTYPE_DMA:
+			/*
+			 * DMA Resource
+			 */
+			status = acpi_rs_dma_stream (linked_list, &buffer, &bytes_consumed);
+			break;
+
+		case ACPI_RSTYPE_START_DPF:
+			/*
+			 * Start Dependent Functions Resource
+			 */
+			status = acpi_rs_start_depend_fns_stream (linked_list,
+					  &buffer, &bytes_consumed);
+			break;
+
+		case ACPI_RSTYPE_END_DPF:
+			/*
+			 * End Dependent Functions Resource
+			 */
+			status = acpi_rs_end_depend_fns_stream (linked_list,
+					  &buffer, &bytes_consumed);
+			break;
+
+		case ACPI_RSTYPE_IO:
+			/*
+			 * IO Port Resource
+			 */
+			status = acpi_rs_io_stream (linked_list, &buffer, &bytes_consumed);
+			break;
+
+		case ACPI_RSTYPE_FIXED_IO:
+			/*
+			 * Fixed IO Port Resource
+			 */
+			status = acpi_rs_fixed_io_stream (linked_list, &buffer, &bytes_consumed);
+			break;
+
+		case ACPI_RSTYPE_VENDOR:
+			/*
+			 * Vendor Defined Resource
+			 */
+			status = acpi_rs_vendor_stream (linked_list, &buffer, &bytes_consumed);
+			break;
+
+		case ACPI_RSTYPE_END_TAG:
+			/*
+			 * End Tag
+			 */
+			status = acpi_rs_end_tag_stream (linked_list, &buffer, &bytes_consumed);
+
+			/*
+			 * An End Tag indicates the end of the Resource Template
+			 */
+			done = TRUE;
+			break;
+
+		case ACPI_RSTYPE_MEM24:
+			/*
+			 * 24-Bit Memory Resource
+			 */
+			status = acpi_rs_memory24_stream (linked_list, &buffer, &bytes_consumed);
+			break;
+
+		case ACPI_RSTYPE_MEM32:
+			/*
+			 * 32-Bit Memory Range Resource
+			 */
+			status = acpi_rs_memory32_range_stream (linked_list, &buffer,
+					 &bytes_consumed);
+			break;
+
+		case ACPI_RSTYPE_FIXED_MEM32:
+			/*
+			 * 32-Bit Fixed Memory Resource
+			 */
+			status = acpi_rs_fixed_memory32_stream (linked_list, &buffer,
+					 &bytes_consumed);
+			break;
+
+		case ACPI_RSTYPE_ADDRESS16:
+			/*
+			 * 16-Bit Address Descriptor Resource
+			 */
+			status = acpi_rs_address16_stream (linked_list, &buffer,
+					 &bytes_consumed);
+			break;
+
+		case ACPI_RSTYPE_ADDRESS32:
+			/*
+			 * 32-Bit Address Descriptor Resource
+			 */
+			status = acpi_rs_address32_stream (linked_list, &buffer,
+					 &bytes_consumed);
+			break;
+
+		case ACPI_RSTYPE_ADDRESS64:
+			/*
+			 * 64-Bit Address Descriptor Resource
+			 */
+			status = acpi_rs_address64_stream (linked_list, &buffer,
+					 &bytes_consumed);
+			break;
+
+		case ACPI_RSTYPE_EXT_IRQ:
+			/*
+			 * Extended IRQ Resource
+			 */
+			status = acpi_rs_extended_irq_stream (linked_list, &buffer,
+					 &bytes_consumed);
+			break;
+
+		default:
+			/*
+			 * If we get here, everything is out of sync,
+			 *  so exit with an error
+			 */
+			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Invalid descriptor type (%X) in resource list\n",
+				linked_list->id));
+			status = AE_BAD_DATA;
+			break;
+
+		} /* switch (linked_list->Id) */
+
+		if (ACPI_FAILURE (status)) {
+			return_ACPI_STATUS (status);
+		}
+
+		/*
+		 * Set the Buffer to point to the open byte
+		 */
+		buffer += bytes_consumed;
+
+		/*
+		 * Point to the next object
+		 */
+		linked_list = ACPI_PTR_ADD (struct acpi_resource,
+				  linked_list, linked_list->length);
+	}
+
+	return_ACPI_STATUS (AE_OK);
+}
+
diff --git a/drivers/acpi/resources/rsmemory.c b/drivers/acpi/resources/rsmemory.c
new file mode 100644
index 0000000..7c935ae
--- /dev/null
+++ b/drivers/acpi/resources/rsmemory.c
@@ -0,0 +1,566 @@
+/*******************************************************************************
+ *
+ * Module Name: rsmem24 - Memory resource descriptors
+ *
+ ******************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#include <acpi/acpi.h>
+#include <acpi/acresrc.h>
+
+#define _COMPONENT          ACPI_RESOURCES
+	 ACPI_MODULE_NAME    ("rsmemory")
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_memory24_resource
+ *
+ * PARAMETERS:  byte_stream_buffer      - Pointer to the resource input byte
+ *                                        stream
+ *              bytes_consumed          - Pointer to where the number of bytes
+ *                                        consumed the byte_stream_buffer is
+ *                                        returned
+ *              output_buffer           - Pointer to the return data buffer
+ *              structure_size          - Pointer to where the number of bytes
+ *                                        in the return data struct is returned
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Take the resource byte stream and fill out the appropriate
+ *              structure pointed to by the output_buffer. Return the
+ *              number of bytes consumed from the byte stream.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_rs_memory24_resource (
+	u8                              *byte_stream_buffer,
+	acpi_size                       *bytes_consumed,
+	u8                              **output_buffer,
+	acpi_size                       *structure_size)
+{
+	u8                              *buffer = byte_stream_buffer;
+	struct acpi_resource            *output_struct = (void *) *output_buffer;
+	u16                             temp16 = 0;
+	u8                              temp8 = 0;
+	acpi_size                       struct_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_mem24);
+
+
+	ACPI_FUNCTION_TRACE ("rs_memory24_resource");
+
+
+	/*
+	 * Point past the Descriptor to get the number of bytes consumed
+	 */
+	buffer += 1;
+
+	ACPI_MOVE_16_TO_16 (&temp16, buffer);
+	buffer += 2;
+	*bytes_consumed = (acpi_size) temp16 + 3;
+	output_struct->id = ACPI_RSTYPE_MEM24;
+
+	/*
+	 * Check Byte 3 the Read/Write bit
+	 */
+	temp8 = *buffer;
+	buffer += 1;
+	output_struct->data.memory24.read_write_attribute = temp8 & 0x01;
+
+	/*
+	 * Get min_base_address (Bytes 4-5)
+	 */
+	ACPI_MOVE_16_TO_16 (&temp16, buffer);
+	buffer += 2;
+	output_struct->data.memory24.min_base_address = temp16;
+
+	/*
+	 * Get max_base_address (Bytes 6-7)
+	 */
+	ACPI_MOVE_16_TO_16 (&temp16, buffer);
+	buffer += 2;
+	output_struct->data.memory24.max_base_address = temp16;
+
+	/*
+	 * Get Alignment (Bytes 8-9)
+	 */
+	ACPI_MOVE_16_TO_16 (&temp16, buffer);
+	buffer += 2;
+	output_struct->data.memory24.alignment = temp16;
+
+	/*
+	 * Get range_length (Bytes 10-11)
+	 */
+	ACPI_MOVE_16_TO_16 (&temp16, buffer);
+	output_struct->data.memory24.range_length = temp16;
+
+	/*
+	 * Set the Length parameter
+	 */
+	output_struct->length = (u32) struct_size;
+
+	/*
+	 * Return the final size of the structure
+	 */
+	*structure_size = struct_size;
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_memory24_stream
+ *
+ * PARAMETERS:  linked_list             - Pointer to the resource linked list
+ *              output_buffer           - Pointer to the user's return buffer
+ *              bytes_consumed          - Pointer to where the number of bytes
+ *                                        used in the output_buffer is returned
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Take the linked list resource structure and fills in the
+ *              the appropriate bytes in a byte stream
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_rs_memory24_stream (
+	struct acpi_resource            *linked_list,
+	u8                              **output_buffer,
+	acpi_size                       *bytes_consumed)
+{
+	u8                              *buffer = *output_buffer;
+	u16                             temp16 = 0;
+	u8                              temp8 = 0;
+
+
+	ACPI_FUNCTION_TRACE ("rs_memory24_stream");
+
+
+	/*
+	 * The descriptor field is static
+	 */
+	*buffer = 0x81;
+	buffer += 1;
+
+	/*
+	 * The length field is static
+	 */
+	temp16 = 0x09;
+	ACPI_MOVE_16_TO_16 (buffer, &temp16);
+	buffer += 2;
+
+	/*
+	 * Set the Information Byte
+	 */
+	temp8 = (u8) (linked_list->data.memory24.read_write_attribute & 0x01);
+	*buffer = temp8;
+	buffer += 1;
+
+	/*
+	 * Set the Range minimum base address
+	 */
+	ACPI_MOVE_32_TO_16 (buffer, &linked_list->data.memory24.min_base_address);
+	buffer += 2;
+
+	/*
+	 * Set the Range maximum base address
+	 */
+	ACPI_MOVE_32_TO_16 (buffer, &linked_list->data.memory24.max_base_address);
+	buffer += 2;
+
+	/*
+	 * Set the base alignment
+	 */
+	ACPI_MOVE_32_TO_16 (buffer, &linked_list->data.memory24.alignment);
+	buffer += 2;
+
+	/*
+	 * Set the range length
+	 */
+	ACPI_MOVE_32_TO_16 (buffer, &linked_list->data.memory24.range_length);
+	buffer += 2;
+
+	/*
+	 * Return the number of bytes consumed in this operation
+	 */
+	*bytes_consumed = ACPI_PTR_DIFF (buffer, *output_buffer);
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_memory32_range_resource
+ *
+ * PARAMETERS:  byte_stream_buffer      - Pointer to the resource input byte
+ *                                        stream
+ *              bytes_consumed          - Pointer to where the number of bytes
+ *                                        consumed the byte_stream_buffer is
+ *                                        returned
+ *              output_buffer           - Pointer to the return data buffer
+ *              structure_size          - Pointer to where the number of bytes
+ *                                        in the return data struct is returned
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Take the resource byte stream and fill out the appropriate
+ *              structure pointed to by the output_buffer. Return the
+ *              number of bytes consumed from the byte stream.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_rs_memory32_range_resource (
+	u8                              *byte_stream_buffer,
+	acpi_size                       *bytes_consumed,
+	u8                              **output_buffer,
+	acpi_size                       *structure_size)
+{
+	u8                              *buffer = byte_stream_buffer;
+	struct acpi_resource            *output_struct = (void *) *output_buffer;
+	u16                             temp16 = 0;
+	u8                              temp8 = 0;
+	acpi_size                       struct_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_mem32);
+
+
+	ACPI_FUNCTION_TRACE ("rs_memory32_range_resource");
+
+
+	/*
+	 * Point past the Descriptor to get the number of bytes consumed
+	 */
+	buffer += 1;
+
+	ACPI_MOVE_16_TO_16 (&temp16, buffer);
+	buffer += 2;
+	*bytes_consumed = (acpi_size) temp16 + 3;
+
+	output_struct->id = ACPI_RSTYPE_MEM32;
+
+	/*
+	 *  Point to the place in the output buffer where the data portion will
+	 *  begin.
+	 *  1. Set the RESOURCE_DATA * Data to point to its own address, then
+	 *  2. Set the pointer to the next address.
+	 *
+	 *  NOTE: output_struct->Data is cast to u8, otherwise, this addition adds
+	 *  4 * sizeof(RESOURCE_DATA) instead of 4 * sizeof(u8)
+	 */
+
+	/*
+	 * Check Byte 3 the Read/Write bit
+	 */
+	temp8 = *buffer;
+	buffer += 1;
+
+	output_struct->data.memory32.read_write_attribute = temp8 & 0x01;
+
+	/*
+	 * Get min_base_address (Bytes 4-7)
+	 */
+	ACPI_MOVE_32_TO_32 (&output_struct->data.memory32.min_base_address, buffer);
+	buffer += 4;
+
+	/*
+	 * Get max_base_address (Bytes 8-11)
+	 */
+	ACPI_MOVE_32_TO_32 (&output_struct->data.memory32.max_base_address, buffer);
+	buffer += 4;
+
+	/*
+	 * Get Alignment (Bytes 12-15)
+	 */
+	ACPI_MOVE_32_TO_32 (&output_struct->data.memory32.alignment, buffer);
+	buffer += 4;
+
+	/*
+	 * Get range_length (Bytes 16-19)
+	 */
+	ACPI_MOVE_32_TO_32 (&output_struct->data.memory32.range_length, buffer);
+
+	/*
+	 * Set the Length parameter
+	 */
+	output_struct->length = (u32) struct_size;
+
+	/*
+	 * Return the final size of the structure
+	 */
+	*structure_size = struct_size;
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_fixed_memory32_resource
+ *
+ * PARAMETERS:  byte_stream_buffer      - Pointer to the resource input byte
+ *                                        stream
+ *              bytes_consumed          - Pointer to where the number of bytes
+ *                                        consumed the byte_stream_buffer is
+ *                                        returned
+ *              output_buffer           - Pointer to the return data buffer
+ *              structure_size          - Pointer to where the number of bytes
+ *                                        in the return data struct is returned
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Take the resource byte stream and fill out the appropriate
+ *              structure pointed to by the output_buffer. Return the
+ *              number of bytes consumed from the byte stream.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_rs_fixed_memory32_resource (
+	u8                              *byte_stream_buffer,
+	acpi_size                       *bytes_consumed,
+	u8                              **output_buffer,
+	acpi_size                       *structure_size)
+{
+	u8                              *buffer = byte_stream_buffer;
+	struct acpi_resource            *output_struct = (void *) *output_buffer;
+	u16                             temp16 = 0;
+	u8                              temp8 = 0;
+	acpi_size                       struct_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_fixed_mem32);
+
+
+	ACPI_FUNCTION_TRACE ("rs_fixed_memory32_resource");
+
+
+	/*
+	 * Point past the Descriptor to get the number of bytes consumed
+	 */
+	buffer += 1;
+	ACPI_MOVE_16_TO_16 (&temp16, buffer);
+
+	buffer += 2;
+	*bytes_consumed = (acpi_size) temp16 + 3;
+
+	output_struct->id = ACPI_RSTYPE_FIXED_MEM32;
+
+	/*
+	 * Check Byte 3 the Read/Write bit
+	 */
+	temp8 = *buffer;
+	buffer += 1;
+	output_struct->data.fixed_memory32.read_write_attribute = temp8 & 0x01;
+
+	/*
+	 * Get range_base_address (Bytes 4-7)
+	 */
+	ACPI_MOVE_32_TO_32 (&output_struct->data.fixed_memory32.range_base_address, buffer);
+	buffer += 4;
+
+	/*
+	 * Get range_length (Bytes 8-11)
+	 */
+	ACPI_MOVE_32_TO_32 (&output_struct->data.fixed_memory32.range_length, buffer);
+
+	/*
+	 * Set the Length parameter
+	 */
+	output_struct->length = (u32) struct_size;
+
+	/*
+	 * Return the final size of the structure
+	 */
+	*structure_size = struct_size;
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_memory32_range_stream
+ *
+ * PARAMETERS:  linked_list             - Pointer to the resource linked list
+ *              output_buffer           - Pointer to the user's return buffer
+ *              bytes_consumed          - Pointer to where the number of bytes
+ *                                        used in the output_buffer is returned
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Take the linked list resource structure and fills in the
+ *              the appropriate bytes in a byte stream
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_rs_memory32_range_stream (
+	struct acpi_resource            *linked_list,
+	u8                              **output_buffer,
+	acpi_size                       *bytes_consumed)
+{
+	u8                              *buffer = *output_buffer;
+	u16                             temp16 = 0;
+	u8                              temp8 = 0;
+
+
+	ACPI_FUNCTION_TRACE ("rs_memory32_range_stream");
+
+
+	/*
+	 * The descriptor field is static
+	 */
+	*buffer = 0x85;
+	buffer += 1;
+
+	/*
+	 * The length field is static
+	 */
+	temp16 = 0x11;
+
+	ACPI_MOVE_16_TO_16 (buffer, &temp16);
+	buffer += 2;
+
+	/*
+	 * Set the Information Byte
+	 */
+	temp8 = (u8) (linked_list->data.memory32.read_write_attribute & 0x01);
+	*buffer = temp8;
+	buffer += 1;
+
+	/*
+	 * Set the Range minimum base address
+	 */
+	ACPI_MOVE_32_TO_32 (buffer, &linked_list->data.memory32.min_base_address);
+	buffer += 4;
+
+	/*
+	 * Set the Range maximum base address
+	 */
+	ACPI_MOVE_32_TO_32 (buffer, &linked_list->data.memory32.max_base_address);
+	buffer += 4;
+
+	/*
+	 * Set the base alignment
+	 */
+	ACPI_MOVE_32_TO_32 (buffer, &linked_list->data.memory32.alignment);
+	buffer += 4;
+
+	/*
+	 * Set the range length
+	 */
+	ACPI_MOVE_32_TO_32 (buffer, &linked_list->data.memory32.range_length);
+	buffer += 4;
+
+	/*
+	 * Return the number of bytes consumed in this operation
+	 */
+	*bytes_consumed = ACPI_PTR_DIFF (buffer, *output_buffer);
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_fixed_memory32_stream
+ *
+ * PARAMETERS:  linked_list             - Pointer to the resource linked list
+ *              output_buffer           - Pointer to the user's return buffer
+ *              bytes_consumed          - Pointer to where the number of bytes
+ *                                        used in the output_buffer is returned
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Take the linked list resource structure and fills in the
+ *              the appropriate bytes in a byte stream
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_rs_fixed_memory32_stream (
+	struct acpi_resource            *linked_list,
+	u8                              **output_buffer,
+	acpi_size                       *bytes_consumed)
+{
+	u8                              *buffer = *output_buffer;
+	u16                             temp16 = 0;
+	u8                              temp8 = 0;
+
+
+	ACPI_FUNCTION_TRACE ("rs_fixed_memory32_stream");
+
+
+	/*
+	 * The descriptor field is static
+	 */
+	*buffer = 0x86;
+	buffer += 1;
+
+	/*
+	 * The length field is static
+	 */
+	temp16 = 0x09;
+
+	ACPI_MOVE_16_TO_16 (buffer, &temp16);
+	buffer += 2;
+
+	/*
+	 * Set the Information Byte
+	 */
+	temp8 = (u8) (linked_list->data.fixed_memory32.read_write_attribute & 0x01);
+	*buffer = temp8;
+	buffer += 1;
+
+	/*
+	 * Set the Range base address
+	 */
+	ACPI_MOVE_32_TO_32 (buffer,
+			 &linked_list->data.fixed_memory32.range_base_address);
+	buffer += 4;
+
+	/*
+	 * Set the range length
+	 */
+	ACPI_MOVE_32_TO_32 (buffer,
+			 &linked_list->data.fixed_memory32.range_length);
+	buffer += 4;
+
+	/*
+	 * Return the number of bytes consumed in this operation
+	 */
+	*bytes_consumed = ACPI_PTR_DIFF (buffer, *output_buffer);
+	return_ACPI_STATUS (AE_OK);
+}
+
diff --git a/drivers/acpi/resources/rsmisc.c b/drivers/acpi/resources/rsmisc.c
new file mode 100644
index 0000000..d16be44
--- /dev/null
+++ b/drivers/acpi/resources/rsmisc.c
@@ -0,0 +1,597 @@
+/*******************************************************************************
+ *
+ * Module Name: rsmisc - Miscellaneous resource descriptors
+ *
+ ******************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#include <acpi/acpi.h>
+#include <acpi/acresrc.h>
+
+#define _COMPONENT          ACPI_RESOURCES
+	 ACPI_MODULE_NAME    ("rsmisc")
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_end_tag_resource
+ *
+ * PARAMETERS:  byte_stream_buffer      - Pointer to the resource input byte
+ *                                        stream
+ *              bytes_consumed          - Pointer to where the number of bytes
+ *                                        consumed the byte_stream_buffer is
+ *                                        returned
+ *              output_buffer           - Pointer to the return data buffer
+ *              structure_size          - Pointer to where the number of bytes
+ *                                        in the return data struct is returned
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Take the resource byte stream and fill out the appropriate
+ *              structure pointed to by the output_buffer. Return the
+ *              number of bytes consumed from the byte stream.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_rs_end_tag_resource (
+	u8                              *byte_stream_buffer,
+	acpi_size                       *bytes_consumed,
+	u8                              **output_buffer,
+	acpi_size                       *structure_size)
+{
+	struct acpi_resource            *output_struct = (void *) *output_buffer;
+	acpi_size                       struct_size = ACPI_RESOURCE_LENGTH;
+
+
+	ACPI_FUNCTION_TRACE ("rs_end_tag_resource");
+
+
+	/*
+	 * The number of bytes consumed is static
+	 */
+	*bytes_consumed = 2;
+
+	/*
+	 *  Fill out the structure
+	 */
+	output_struct->id = ACPI_RSTYPE_END_TAG;
+
+	/*
+	 * Set the Length parameter
+	 */
+	output_struct->length = 0;
+
+	/*
+	 * Return the final size of the structure
+	 */
+	*structure_size = struct_size;
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_end_tag_stream
+ *
+ * PARAMETERS:  linked_list             - Pointer to the resource linked list
+ *              output_buffer           - Pointer to the user's return buffer
+ *              bytes_consumed          - Pointer to where the number of bytes
+ *                                        used in the output_buffer is returned
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Take the linked list resource structure and fills in the
+ *              the appropriate bytes in a byte stream
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_rs_end_tag_stream (
+	struct acpi_resource            *linked_list,
+	u8                              **output_buffer,
+	acpi_size                       *bytes_consumed)
+{
+	u8                              *buffer = *output_buffer;
+	u8                              temp8 = 0;
+
+
+	ACPI_FUNCTION_TRACE ("rs_end_tag_stream");
+
+
+	/*
+	 * The descriptor field is static
+	 */
+	*buffer = 0x79;
+	buffer += 1;
+
+	/*
+	 * Set the Checksum - zero means that the resource data is treated as if
+	 * the checksum operation succeeded (ACPI Spec 1.0b Section 6.4.2.8)
+	 */
+	temp8 = 0;
+
+	*buffer = temp8;
+	buffer += 1;
+
+	/*
+	 * Return the number of bytes consumed in this operation
+	 */
+	*bytes_consumed = ACPI_PTR_DIFF (buffer, *output_buffer);
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_vendor_resource
+ *
+ * PARAMETERS:  byte_stream_buffer      - Pointer to the resource input byte
+ *                                        stream
+ *              bytes_consumed          - Pointer to where the number of bytes
+ *                                        consumed the byte_stream_buffer is
+ *                                        returned
+ *              output_buffer           - Pointer to the return data buffer
+ *              structure_size          - Pointer to where the number of bytes
+ *                                        in the return data struct is returned
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Take the resource byte stream and fill out the appropriate
+ *              structure pointed to by the output_buffer. Return the
+ *              number of bytes consumed from the byte stream.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_rs_vendor_resource (
+	u8                              *byte_stream_buffer,
+	acpi_size                       *bytes_consumed,
+	u8                              **output_buffer,
+	acpi_size                       *structure_size)
+{
+	u8                              *buffer = byte_stream_buffer;
+	struct acpi_resource            *output_struct = (void *) *output_buffer;
+	u16                             temp16 = 0;
+	u8                              temp8 = 0;
+	u8                              index;
+	acpi_size                       struct_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_vendor);
+
+
+	ACPI_FUNCTION_TRACE ("rs_vendor_resource");
+
+
+	/*
+	 * Dereference the Descriptor to find if this is a large or small item.
+	 */
+	temp8 = *buffer;
+
+	if (temp8 & 0x80) {
+		/*
+		 * Large Item, point to the length field
+		 */
+		buffer += 1;
+
+		/* Dereference */
+
+		ACPI_MOVE_16_TO_16 (&temp16, buffer);
+
+		/* Calculate bytes consumed */
+
+		*bytes_consumed = (acpi_size) temp16 + 3;
+
+		/* Point to the first vendor byte */
+
+		buffer += 2;
+	}
+	else {
+		/*
+		 * Small Item, dereference the size
+		 */
+		temp16 = (u8)(*buffer & 0x07);
+
+		/* Calculate bytes consumed */
+
+		*bytes_consumed = (acpi_size) temp16 + 1;
+
+		/* Point to the first vendor byte */
+
+		buffer += 1;
+	}
+
+	output_struct->id = ACPI_RSTYPE_VENDOR;
+	output_struct->data.vendor_specific.length = temp16;
+
+	for (index = 0; index < temp16; index++) {
+		output_struct->data.vendor_specific.reserved[index] = *buffer;
+		buffer += 1;
+	}
+
+	/*
+	 * In order for the struct_size to fall on a 32-bit boundary,
+	 * calculate the length of the vendor string and expand the
+	 * struct_size to the next 32-bit boundary.
+	 */
+	struct_size += ACPI_ROUND_UP_to_32_bITS (temp16);
+
+	/*
+	 * Set the Length parameter
+	 */
+	output_struct->length = (u32) struct_size;
+
+	/*
+	 * Return the final size of the structure
+	 */
+	*structure_size = struct_size;
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_vendor_stream
+ *
+ * PARAMETERS:  linked_list             - Pointer to the resource linked list
+ *              output_buffer           - Pointer to the user's return buffer
+ *              bytes_consumed          - Pointer to where the number of bytes
+ *                                        used in the output_buffer is returned
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Take the linked list resource structure and fills in the
+ *              the appropriate bytes in a byte stream
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_rs_vendor_stream (
+	struct acpi_resource            *linked_list,
+	u8                              **output_buffer,
+	acpi_size                       *bytes_consumed)
+{
+	u8                              *buffer = *output_buffer;
+	u16                             temp16 = 0;
+	u8                              temp8 = 0;
+	u8                              index;
+
+
+	ACPI_FUNCTION_TRACE ("rs_vendor_stream");
+
+
+	/*
+	 * Dereference the length to find if this is a large or small item.
+	 */
+	if(linked_list->data.vendor_specific.length > 7) {
+		/*
+		 * Large Item, Set the descriptor field and length bytes
+		 */
+		*buffer = 0x84;
+		buffer += 1;
+
+		temp16 = (u16) linked_list->data.vendor_specific.length;
+
+		ACPI_MOVE_16_TO_16 (buffer, &temp16);
+		buffer += 2;
+	}
+	else {
+		/*
+		 * Small Item, Set the descriptor field
+		 */
+		temp8 = 0x70;
+		temp8 |= (u8) linked_list->data.vendor_specific.length;
+
+		*buffer = temp8;
+		buffer += 1;
+	}
+
+	/*
+	 * Loop through all of the Vendor Specific fields
+	 */
+	for (index = 0; index < linked_list->data.vendor_specific.length; index++) {
+		temp8 = linked_list->data.vendor_specific.reserved[index];
+
+		*buffer = temp8;
+		buffer += 1;
+	}
+
+	/*
+	 * Return the number of bytes consumed in this operation
+	 */
+	*bytes_consumed = ACPI_PTR_DIFF (buffer, *output_buffer);
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_start_depend_fns_resource
+ *
+ * PARAMETERS:  byte_stream_buffer      - Pointer to the resource input byte
+ *                                        stream
+ *              bytes_consumed          - Pointer to where the number of bytes
+ *                                        consumed the byte_stream_buffer is
+ *                                        returned
+ *              output_buffer           - Pointer to the return data buffer
+ *              structure_size          - Pointer to where the number of bytes
+ *                                        in the return data struct is returned
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Take the resource byte stream and fill out the appropriate
+ *              structure pointed to by the output_buffer. Return the
+ *              number of bytes consumed from the byte stream.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_rs_start_depend_fns_resource (
+	u8                              *byte_stream_buffer,
+	acpi_size                       *bytes_consumed,
+	u8                              **output_buffer,
+	acpi_size                       *structure_size)
+{
+	u8                              *buffer = byte_stream_buffer;
+	struct acpi_resource            *output_struct = (void *) *output_buffer;
+	u8                              temp8 = 0;
+	acpi_size                       struct_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_start_dpf);
+
+
+	ACPI_FUNCTION_TRACE ("rs_start_depend_fns_resource");
+
+
+	/*
+	 * The number of bytes consumed are contained in the descriptor (Bits:0-1)
+	 */
+	temp8 = *buffer;
+
+	*bytes_consumed = (temp8 & 0x01) + 1;
+
+	output_struct->id = ACPI_RSTYPE_START_DPF;
+
+	/*
+	 * Point to Byte 1 if it is used
+	 */
+	if (2 == *bytes_consumed) {
+		buffer += 1;
+		temp8 = *buffer;
+
+		/*
+		 * Check Compatibility priority
+		 */
+		output_struct->data.start_dpf.compatibility_priority = temp8 & 0x03;
+
+		if (3 == output_struct->data.start_dpf.compatibility_priority) {
+			return_ACPI_STATUS (AE_AML_BAD_RESOURCE_VALUE);
+		}
+
+		/*
+		 * Check Performance/Robustness preference
+		 */
+		output_struct->data.start_dpf.performance_robustness = (temp8 >> 2) & 0x03;
+
+		if (3 == output_struct->data.start_dpf.performance_robustness) {
+			return_ACPI_STATUS (AE_AML_BAD_RESOURCE_VALUE);
+		}
+	}
+	else {
+		output_struct->data.start_dpf.compatibility_priority =
+				ACPI_ACCEPTABLE_CONFIGURATION;
+
+		output_struct->data.start_dpf.performance_robustness =
+				ACPI_ACCEPTABLE_CONFIGURATION;
+	}
+
+	/*
+	 * Set the Length parameter
+	 */
+	output_struct->length = (u32) struct_size;
+
+	/*
+	 * Return the final size of the structure
+	 */
+	*structure_size = struct_size;
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_end_depend_fns_resource
+ *
+ * PARAMETERS:  byte_stream_buffer      - Pointer to the resource input byte
+ *                                        stream
+ *              bytes_consumed          - Pointer to where the number of bytes
+ *                                        consumed the byte_stream_buffer is
+ *                                        returned
+ *              output_buffer           - Pointer to the return data buffer
+ *              structure_size          - Pointer to where the number of bytes
+ *                                        in the return data struct is returned
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Take the resource byte stream and fill out the appropriate
+ *              structure pointed to by the output_buffer. Return the
+ *              number of bytes consumed from the byte stream.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_rs_end_depend_fns_resource (
+	u8                              *byte_stream_buffer,
+	acpi_size                       *bytes_consumed,
+	u8                              **output_buffer,
+	acpi_size                       *structure_size)
+{
+	struct acpi_resource            *output_struct = (void *) *output_buffer;
+	acpi_size                       struct_size = ACPI_RESOURCE_LENGTH;
+
+
+	ACPI_FUNCTION_TRACE ("rs_end_depend_fns_resource");
+
+
+	/*
+	 * The number of bytes consumed is static
+	 */
+	*bytes_consumed = 1;
+
+	/*
+	 *  Fill out the structure
+	 */
+	output_struct->id = ACPI_RSTYPE_END_DPF;
+
+	/*
+	 * Set the Length parameter
+	 */
+	output_struct->length = (u32) struct_size;
+
+	/*
+	 * Return the final size of the structure
+	 */
+	*structure_size = struct_size;
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_start_depend_fns_stream
+ *
+ * PARAMETERS:  linked_list             - Pointer to the resource linked list
+ *              output_buffer           - Pointer to the user's return buffer
+ *              bytes_consumed          - u32 pointer that is filled with
+ *                                        the number of bytes of the
+ *                                        output_buffer used
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Take the linked list resource structure and fills in the
+ *              the appropriate bytes in a byte stream
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_rs_start_depend_fns_stream (
+	struct acpi_resource            *linked_list,
+	u8                              **output_buffer,
+	acpi_size                       *bytes_consumed)
+{
+	u8                              *buffer = *output_buffer;
+	u8                              temp8 = 0;
+
+
+	ACPI_FUNCTION_TRACE ("rs_start_depend_fns_stream");
+
+
+	/*
+	 * The descriptor field is set based upon whether a byte is needed
+	 * to contain Priority data.
+	 */
+	if (ACPI_ACCEPTABLE_CONFIGURATION ==
+			linked_list->data.start_dpf.compatibility_priority &&
+		ACPI_ACCEPTABLE_CONFIGURATION ==
+			linked_list->data.start_dpf.performance_robustness) {
+		*buffer = 0x30;
+	}
+	else {
+		*buffer = 0x31;
+		buffer += 1;
+
+		/*
+		 * Set the Priority Byte Definition
+		 */
+		temp8 = 0;
+		temp8 = (u8) ((linked_list->data.start_dpf.performance_robustness &
+				   0x03) << 2);
+		temp8 |= (linked_list->data.start_dpf.compatibility_priority &
+				   0x03);
+		*buffer = temp8;
+	}
+
+	buffer += 1;
+
+	/*
+	 * Return the number of bytes consumed in this operation
+	 */
+	*bytes_consumed = ACPI_PTR_DIFF (buffer, *output_buffer);
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_end_depend_fns_stream
+ *
+ * PARAMETERS:  linked_list             - Pointer to the resource linked list
+ *              output_buffer           - Pointer to the user's return buffer
+ *              bytes_consumed          - Pointer to where the number of bytes
+ *                                        used in the output_buffer is returned
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Take the linked list resource structure and fills in the
+ *              the appropriate bytes in a byte stream
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_rs_end_depend_fns_stream (
+	struct acpi_resource            *linked_list,
+	u8                              **output_buffer,
+	acpi_size                       *bytes_consumed)
+{
+	u8                              *buffer = *output_buffer;
+
+
+	ACPI_FUNCTION_TRACE ("rs_end_depend_fns_stream");
+
+
+	/*
+	 * The descriptor field is static
+	 */
+	*buffer = 0x38;
+	buffer += 1;
+
+	/*
+	 * Return the number of bytes consumed in this operation
+	 */
+	*bytes_consumed = ACPI_PTR_DIFF (buffer, *output_buffer);
+	return_ACPI_STATUS (AE_OK);
+}
+
diff --git a/drivers/acpi/resources/rsutils.c b/drivers/acpi/resources/rsutils.c
new file mode 100644
index 0000000..ee9ce13
--- /dev/null
+++ b/drivers/acpi/resources/rsutils.c
@@ -0,0 +1,356 @@
+/*******************************************************************************
+ *
+ * Module Name: rsutils - Utilities for the resource manager
+ *
+ ******************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#include <acpi/acpi.h>
+#include <acpi/acnamesp.h>
+#include <acpi/acresrc.h>
+
+
+#define _COMPONENT          ACPI_RESOURCES
+	 ACPI_MODULE_NAME    ("rsutils")
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_get_prt_method_data
+ *
+ * PARAMETERS:  Handle          - a handle to the containing object
+ *              ret_buffer      - a pointer to a buffer structure for the
+ *                                  results
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: This function is called to get the _PRT value of an object
+ *              contained in an object specified by the handle passed in
+ *
+ *              If the function fails an appropriate status will be returned
+ *              and the contents of the callers buffer is undefined.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_rs_get_prt_method_data (
+	acpi_handle                     handle,
+	struct acpi_buffer              *ret_buffer)
+{
+	union acpi_operand_object       *obj_desc;
+	acpi_status                     status;
+
+
+	ACPI_FUNCTION_TRACE ("rs_get_prt_method_data");
+
+
+	/* Parameters guaranteed valid by caller */
+
+	/*
+	 * Execute the method, no parameters
+	 */
+	status = acpi_ut_evaluate_object (handle, "_PRT", ACPI_BTYPE_PACKAGE, &obj_desc);
+	if (ACPI_FAILURE (status)) {
+		return_ACPI_STATUS (status);
+	}
+
+	/*
+	 * Create a resource linked list from the byte stream buffer that comes
+	 * back from the _CRS method execution.
+	 */
+	status = acpi_rs_create_pci_routing_table (obj_desc, ret_buffer);
+
+	/* On exit, we must delete the object returned by evaluate_object */
+
+	acpi_ut_remove_reference (obj_desc);
+	return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_get_crs_method_data
+ *
+ * PARAMETERS:  Handle          - a handle to the containing object
+ *              ret_buffer      - a pointer to a buffer structure for the
+ *                                  results
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: This function is called to get the _CRS value of an object
+ *              contained in an object specified by the handle passed in
+ *
+ *              If the function fails an appropriate status will be returned
+ *              and the contents of the callers buffer is undefined.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_rs_get_crs_method_data (
+	acpi_handle                     handle,
+	struct acpi_buffer              *ret_buffer)
+{
+	union acpi_operand_object       *obj_desc;
+	acpi_status                     status;
+
+
+	ACPI_FUNCTION_TRACE ("rs_get_crs_method_data");
+
+
+	/* Parameters guaranteed valid by caller */
+
+	/*
+	 * Execute the method, no parameters
+	 */
+	status = acpi_ut_evaluate_object (handle, "_CRS", ACPI_BTYPE_BUFFER, &obj_desc);
+	if (ACPI_FAILURE (status)) {
+		return_ACPI_STATUS (status);
+	}
+
+	/*
+	 * Make the call to create a resource linked list from the
+	 * byte stream buffer that comes back from the _CRS method
+	 * execution.
+	 */
+	status = acpi_rs_create_resource_list (obj_desc, ret_buffer);
+
+	/* on exit, we must delete the object returned by evaluate_object */
+
+	acpi_ut_remove_reference (obj_desc);
+	return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_get_prs_method_data
+ *
+ * PARAMETERS:  Handle          - a handle to the containing object
+ *              ret_buffer      - a pointer to a buffer structure for the
+ *                                  results
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: This function is called to get the _PRS value of an object
+ *              contained in an object specified by the handle passed in
+ *
+ *              If the function fails an appropriate status will be returned
+ *              and the contents of the callers buffer is undefined.
+ *
+ ******************************************************************************/
+#ifdef ACPI_FUTURE_USAGE
+acpi_status
+acpi_rs_get_prs_method_data (
+	acpi_handle                     handle,
+	struct acpi_buffer              *ret_buffer)
+{
+	union acpi_operand_object       *obj_desc;
+	acpi_status                     status;
+
+
+	ACPI_FUNCTION_TRACE ("rs_get_prs_method_data");
+
+
+	/* Parameters guaranteed valid by caller */
+
+	/*
+	 * Execute the method, no parameters
+	 */
+	status = acpi_ut_evaluate_object (handle, "_PRS", ACPI_BTYPE_BUFFER, &obj_desc);
+	if (ACPI_FAILURE (status)) {
+		return_ACPI_STATUS (status);
+	}
+
+	/*
+	 * Make the call to create a resource linked list from the
+	 * byte stream buffer that comes back from the _CRS method
+	 * execution.
+	 */
+	status = acpi_rs_create_resource_list (obj_desc, ret_buffer);
+
+	/* on exit, we must delete the object returned by evaluate_object */
+
+	acpi_ut_remove_reference (obj_desc);
+	return_ACPI_STATUS (status);
+}
+#endif  /*  ACPI_FUTURE_USAGE  */
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_get_method_data
+ *
+ * PARAMETERS:  Handle          - a handle to the containing object
+ *              ret_buffer      - a pointer to a buffer structure for the
+ *                                  results
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: This function is called to get the _CRS or _PRS value of an
+ *              object contained in an object specified by the handle passed in
+ *
+ *              If the function fails an appropriate status will be returned
+ *              and the contents of the callers buffer is undefined.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_rs_get_method_data (
+	acpi_handle                     handle,
+	char                            *path,
+	struct acpi_buffer              *ret_buffer)
+{
+	union acpi_operand_object       *obj_desc;
+	acpi_status                     status;
+
+
+	ACPI_FUNCTION_TRACE ("rs_get_method_data");
+
+
+	/* Parameters guaranteed valid by caller */
+
+	/*
+	 * Execute the method, no parameters
+	 */
+	status = acpi_ut_evaluate_object (handle, path, ACPI_BTYPE_BUFFER, &obj_desc);
+	if (ACPI_FAILURE (status)) {
+		return_ACPI_STATUS (status);
+	}
+
+	/*
+	 * Make the call to create a resource linked list from the
+	 * byte stream buffer that comes back from the method
+	 * execution.
+	 */
+	status = acpi_rs_create_resource_list (obj_desc, ret_buffer);
+
+	/* On exit, we must delete the object returned by evaluate_object */
+
+	acpi_ut_remove_reference (obj_desc);
+	return_ACPI_STATUS (status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_rs_set_srs_method_data
+ *
+ * PARAMETERS:  Handle          - a handle to the containing object
+ *              in_buffer       - a pointer to a buffer structure of the
+ *                                  parameter
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: This function is called to set the _SRS of an object contained
+ *              in an object specified by the handle passed in
+ *
+ *              If the function fails an appropriate status will be returned
+ *              and the contents of the callers buffer is undefined.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_rs_set_srs_method_data (
+	acpi_handle                     handle,
+	struct acpi_buffer              *in_buffer)
+{
+	struct acpi_parameter_info      info;
+	union acpi_operand_object       *params[2];
+	acpi_status                     status;
+	struct acpi_buffer              buffer;
+
+
+	ACPI_FUNCTION_TRACE ("rs_set_srs_method_data");
+
+
+	/* Parameters guaranteed valid by caller */
+
+	/*
+	 * The in_buffer parameter will point to a linked list of
+	 * resource parameters.  It needs to be formatted into a
+	 * byte stream to be sent in as an input parameter to _SRS
+	 *
+	 * Convert the linked list into a byte stream
+	 */
+	buffer.length = ACPI_ALLOCATE_LOCAL_BUFFER;
+	status = acpi_rs_create_byte_stream (in_buffer->pointer, &buffer);
+	if (ACPI_FAILURE (status)) {
+		return_ACPI_STATUS (status);
+	}
+
+	/*
+	 * Init the param object
+	 */
+	params[0] = acpi_ut_create_internal_object (ACPI_TYPE_BUFFER);
+	if (!params[0]) {
+		acpi_os_free (buffer.pointer);
+		return_ACPI_STATUS (AE_NO_MEMORY);
+	}
+
+	/*
+	 * Set up the parameter object
+	 */
+	params[0]->buffer.length  = (u32) buffer.length;
+	params[0]->buffer.pointer = buffer.pointer;
+	params[0]->common.flags   = AOPOBJ_DATA_VALID;
+	params[1] = NULL;
+
+	info.node = handle;
+	info.parameters = params;
+	info.parameter_type = ACPI_PARAM_ARGS;
+
+	/*
+	 * Execute the method, no return value
+	 */
+	status = acpi_ns_evaluate_relative ("_SRS", &info);
+	if (ACPI_SUCCESS (status)) {
+		/* Delete any return object (especially if implicit_return is enabled) */
+
+		if (info.return_object) {
+			acpi_ut_remove_reference (info.return_object);
+		}
+	}
+
+	/*
+	 * Clean up and return the status from acpi_ns_evaluate_relative
+	 */
+	acpi_ut_remove_reference (params[0]);
+	return_ACPI_STATUS (status);
+}
+
diff --git a/drivers/acpi/resources/rsxface.c b/drivers/acpi/resources/rsxface.c
new file mode 100644
index 0000000..a9cdcbe
--- /dev/null
+++ b/drivers/acpi/resources/rsxface.c
@@ -0,0 +1,437 @@
+/*******************************************************************************
+ *
+ * Module Name: rsxface - Public interfaces to the resource manager
+ *
+ ******************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <linux/module.h>
+
+#include <acpi/acpi.h>
+#include <acpi/acresrc.h>
+
+#define _COMPONENT          ACPI_RESOURCES
+	 ACPI_MODULE_NAME    ("rsxface")
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_get_irq_routing_table
+ *
+ * PARAMETERS:  device_handle   - a handle to the Bus device we are querying
+ *              ret_buffer      - a pointer to a buffer to receive the
+ *                                current resources for the device
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: This function is called to get the IRQ routing table for a
+ *              specific bus.  The caller must first acquire a handle for the
+ *              desired bus.  The routine table is placed in the buffer pointed
+ *              to by the ret_buffer variable parameter.
+ *
+ *              If the function fails an appropriate status will be returned
+ *              and the value of ret_buffer is undefined.
+ *
+ *              This function attempts to execute the _PRT method contained in
+ *              the object indicated by the passed device_handle.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_get_irq_routing_table (
+	acpi_handle                     device_handle,
+	struct acpi_buffer              *ret_buffer)
+{
+	acpi_status                     status;
+
+
+	ACPI_FUNCTION_TRACE ("acpi_get_irq_routing_table ");
+
+
+	/*
+	 * Must have a valid handle and buffer, So we have to have a handle
+	 * and a return buffer structure, and if there is a non-zero buffer length
+	 * we also need a valid pointer in the buffer. If it's a zero buffer length,
+	 * we'll be returning the needed buffer size, so keep going.
+	 */
+	if (!device_handle) {
+		return_ACPI_STATUS (AE_BAD_PARAMETER);
+	}
+
+	status = acpi_ut_validate_buffer (ret_buffer);
+	if (ACPI_FAILURE (status)) {
+		return_ACPI_STATUS (status);
+	}
+
+	status = acpi_rs_get_prt_method_data (device_handle, ret_buffer);
+	return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_get_current_resources
+ *
+ * PARAMETERS:  device_handle   - a handle to the device object for the
+ *                                device we are querying
+ *              ret_buffer      - a pointer to a buffer to receive the
+ *                                current resources for the device
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: This function is called to get the current resources for a
+ *              specific device.  The caller must first acquire a handle for
+ *              the desired device.  The resource data is placed in the buffer
+ *              pointed to by the ret_buffer variable parameter.
+ *
+ *              If the function fails an appropriate status will be returned
+ *              and the value of ret_buffer is undefined.
+ *
+ *              This function attempts to execute the _CRS method contained in
+ *              the object indicated by the passed device_handle.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_get_current_resources (
+	acpi_handle                     device_handle,
+	struct acpi_buffer              *ret_buffer)
+{
+	acpi_status                     status;
+
+
+	ACPI_FUNCTION_TRACE ("acpi_get_current_resources");
+
+
+	/*
+	 * Must have a valid handle and buffer, So we have to have a handle
+	 * and a return buffer structure, and if there is a non-zero buffer length
+	 * we also need a valid pointer in the buffer. If it's a zero buffer length,
+	 * we'll be returning the needed buffer size, so keep going.
+	 */
+	if (!device_handle) {
+		return_ACPI_STATUS (AE_BAD_PARAMETER);
+	}
+
+	status = acpi_ut_validate_buffer (ret_buffer);
+	if (ACPI_FAILURE (status)) {
+		return_ACPI_STATUS (status);
+	}
+
+	status = acpi_rs_get_crs_method_data (device_handle, ret_buffer);
+	return_ACPI_STATUS (status);
+}
+EXPORT_SYMBOL(acpi_get_current_resources);
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_get_possible_resources
+ *
+ * PARAMETERS:  device_handle   - a handle to the device object for the
+ *                                device we are querying
+ *              ret_buffer      - a pointer to a buffer to receive the
+ *                                resources for the device
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: This function is called to get a list of the possible resources
+ *              for a specific device.  The caller must first acquire a handle
+ *              for the desired device.  The resource data is placed in the
+ *              buffer pointed to by the ret_buffer variable.
+ *
+ *              If the function fails an appropriate status will be returned
+ *              and the value of ret_buffer is undefined.
+ *
+ ******************************************************************************/
+#ifdef ACPI_FUTURE_USAGE
+acpi_status
+acpi_get_possible_resources (
+	acpi_handle                     device_handle,
+	struct acpi_buffer              *ret_buffer)
+{
+	acpi_status                     status;
+
+
+	ACPI_FUNCTION_TRACE ("acpi_get_possible_resources");
+
+
+	/*
+	 * Must have a valid handle and buffer, So we have to have a handle
+	 * and a return buffer structure, and if there is a non-zero buffer length
+	 * we also need a valid pointer in the buffer. If it's a zero buffer length,
+	 * we'll be returning the needed buffer size, so keep going.
+	 */
+	if (!device_handle) {
+		return_ACPI_STATUS (AE_BAD_PARAMETER);
+	}
+
+	status = acpi_ut_validate_buffer (ret_buffer);
+	if (ACPI_FAILURE (status)) {
+		return_ACPI_STATUS (status);
+	}
+
+	status = acpi_rs_get_prs_method_data (device_handle, ret_buffer);
+	return_ACPI_STATUS (status);
+}
+EXPORT_SYMBOL(acpi_get_possible_resources);
+#endif  /*  ACPI_FUTURE_USAGE  */
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_walk_resources
+ *
+ * PARAMETERS:  device_handle   - a handle to the device object for the
+ *                                device we are querying
+ *              Path            - method name of the resources we want
+ *                                (METHOD_NAME__CRS or METHOD_NAME__PRS)
+ *              user_function   - called for each resource
+ *              Context         - passed to user_function
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Retrieves the current or possible resource list for the
+ *              specified device.  The user_function is called once for
+ *              each resource in the list.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_walk_resources (
+	acpi_handle                             device_handle,
+	char                                    *path,
+	ACPI_WALK_RESOURCE_CALLBACK     user_function,
+	void                                    *context)
+{
+	acpi_status                         status;
+	struct acpi_buffer                  buffer = {ACPI_ALLOCATE_BUFFER, NULL};
+	struct acpi_resource                *resource;
+	struct acpi_resource                *buffer_end;
+
+
+	ACPI_FUNCTION_TRACE ("acpi_walk_resources");
+
+
+	if (!device_handle ||
+		(ACPI_STRNCMP (path, METHOD_NAME__CRS, sizeof (METHOD_NAME__CRS)) &&
+		 ACPI_STRNCMP (path, METHOD_NAME__PRS, sizeof (METHOD_NAME__PRS)))) {
+		return_ACPI_STATUS (AE_BAD_PARAMETER);
+	}
+
+	status = acpi_rs_get_method_data (device_handle, path, &buffer);
+	if (ACPI_FAILURE (status)) {
+		return_ACPI_STATUS (status);
+	}
+
+	/* Setup pointers */
+
+	resource  = (struct acpi_resource *) buffer.pointer;
+	buffer_end = ACPI_CAST_PTR (struct acpi_resource,
+			  ((u8 *) buffer.pointer + buffer.length));
+
+	/* Walk the resource list */
+
+	for (;;) {
+		if (!resource || resource->id == ACPI_RSTYPE_END_TAG) {
+			break;
+		}
+
+		status = user_function (resource, context);
+
+		switch (status) {
+		case AE_OK:
+		case AE_CTRL_DEPTH:
+
+			/* Just keep going */
+
+			status = AE_OK;
+			break;
+
+		case AE_CTRL_TERMINATE:
+
+			/* Exit now, with OK stats */
+
+			status = AE_OK;
+			goto cleanup;
+
+		default:
+
+			/* All others are valid exceptions */
+
+			goto cleanup;
+		}
+
+		/* Get the next resource descriptor */
+
+		resource = ACPI_NEXT_RESOURCE (resource);
+
+		/* Check for end-of-buffer */
+
+		if (resource >= buffer_end) {
+			goto cleanup;
+		}
+	}
+
+cleanup:
+
+	acpi_os_free (buffer.pointer);
+	return_ACPI_STATUS (status);
+}
+EXPORT_SYMBOL(acpi_walk_resources);
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_set_current_resources
+ *
+ * PARAMETERS:  device_handle   - a handle to the device object for the
+ *                                device we are changing the resources of
+ *              in_buffer       - a pointer to a buffer containing the
+ *                                resources to be set for the device
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: This function is called to set the current resources for a
+ *              specific device.  The caller must first acquire a handle for
+ *              the desired device.  The resource data is passed to the routine
+ *              the buffer pointed to by the in_buffer variable.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_set_current_resources (
+	acpi_handle                     device_handle,
+	struct acpi_buffer              *in_buffer)
+{
+	acpi_status                     status;
+
+
+	ACPI_FUNCTION_TRACE ("acpi_set_current_resources");
+
+
+	/*
+	 * Must have a valid handle and buffer
+	 */
+	if ((!device_handle)      ||
+		(!in_buffer)          ||
+		(!in_buffer->pointer) ||
+		(!in_buffer->length)) {
+		return_ACPI_STATUS (AE_BAD_PARAMETER);
+	}
+
+	status = acpi_rs_set_srs_method_data (device_handle, in_buffer);
+	return_ACPI_STATUS (status);
+}
+EXPORT_SYMBOL(acpi_set_current_resources);
+
+
+#define ACPI_COPY_FIELD(out, in, field)  ((out)->field = (in)->field)
+#define ACPI_COPY_ADDRESS(out, in)                      \
+	ACPI_COPY_FIELD(out, in, resource_type);             \
+	ACPI_COPY_FIELD(out, in, producer_consumer);         \
+	ACPI_COPY_FIELD(out, in, decode);                    \
+	ACPI_COPY_FIELD(out, in, min_address_fixed);         \
+	ACPI_COPY_FIELD(out, in, max_address_fixed);         \
+	ACPI_COPY_FIELD(out, in, attribute);                 \
+	ACPI_COPY_FIELD(out, in, granularity);               \
+	ACPI_COPY_FIELD(out, in, min_address_range);         \
+	ACPI_COPY_FIELD(out, in, max_address_range);         \
+	ACPI_COPY_FIELD(out, in, address_translation_offset); \
+	ACPI_COPY_FIELD(out, in, address_length);            \
+	ACPI_COPY_FIELD(out, in, resource_source);
+
+/******************************************************************************
+ *
+ * FUNCTION:    acpi_resource_to_address64
+ *
+ * PARAMETERS:  resource                - Pointer to a resource
+ *              out                     - Pointer to the users's return
+ *                                        buffer (a struct
+ *                                        struct acpi_resource_address64)
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: If the resource is an address16, address32, or address64,
+ *              copy it to the address64 return buffer.  This saves the
+ *              caller from having to duplicate code for different-sized
+ *              addresses.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_resource_to_address64 (
+	struct acpi_resource                *resource,
+	struct acpi_resource_address64      *out)
+{
+	struct acpi_resource_address16      *address16;
+	struct acpi_resource_address32      *address32;
+
+
+	switch (resource->id) {
+	case ACPI_RSTYPE_ADDRESS16:
+
+		address16 = (struct acpi_resource_address16 *) &resource->data;
+		ACPI_COPY_ADDRESS(out, address16);
+		break;
+
+
+	case ACPI_RSTYPE_ADDRESS32:
+
+		address32 = (struct acpi_resource_address32 *) &resource->data;
+		ACPI_COPY_ADDRESS(out, address32);
+		break;
+
+
+	case ACPI_RSTYPE_ADDRESS64:
+
+		/* Simple copy for 64 bit source */
+
+		ACPI_MEMCPY (out, &resource->data, sizeof (struct acpi_resource_address64));
+		break;
+
+
+	default:
+		return (AE_BAD_PARAMETER);
+	}
+
+	return (AE_OK);
+}
+EXPORT_SYMBOL(acpi_resource_to_address64);
+