diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/acpi/resources/rscalc.c | |
download | op-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip op-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz |
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/acpi/resources/rscalc.c')
-rw-r--r-- | drivers/acpi/resources/rscalc.c | 841 |
1 files changed, 841 insertions, 0 deletions
diff --git a/drivers/acpi/resources/rscalc.c b/drivers/acpi/resources/rscalc.c new file mode 100644 index 0000000..8a5f0a5 --- /dev/null +++ b/drivers/acpi/resources/rscalc.c @@ -0,0 +1,841 @@ +/******************************************************************************* + * + * Module Name: rscalc - Calculate stream and list lengths + * + ******************************************************************************/ + +/* + * Copyright (C) 2000 - 2005, R. Byron Moore + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + + +#include <acpi/acpi.h> +#include <acpi/acresrc.h> +#include <acpi/amlcode.h> +#include <acpi/acnamesp.h> + +#define _COMPONENT ACPI_RESOURCES + ACPI_MODULE_NAME ("rscalc") + + +/******************************************************************************* + * + * FUNCTION: acpi_rs_get_byte_stream_length + * + * PARAMETERS: linked_list - Pointer to the resource linked list + * size_needed - u32 pointer of the size buffer needed + * to properly return the parsed data + * + * RETURN: Status + * + * DESCRIPTION: Takes the resource byte stream and parses it once, calculating + * the size buffer needed to hold the linked list that conveys + * the resource data. + * + ******************************************************************************/ + +acpi_status +acpi_rs_get_byte_stream_length ( + struct acpi_resource *linked_list, + acpi_size *size_needed) +{ + acpi_size byte_stream_size_needed = 0; + acpi_size segment_size; + u8 done = FALSE; + + + ACPI_FUNCTION_TRACE ("rs_get_byte_stream_length"); + + + while (!done) { + /* + * Init the variable that will hold the size to add to the total. + */ + segment_size = 0; + + switch (linked_list->id) { + case ACPI_RSTYPE_IRQ: + /* + * IRQ Resource + * For an IRQ Resource, Byte 3, although optional, will always be + * created - it holds IRQ information. + */ + segment_size = 4; + break; + + case ACPI_RSTYPE_DMA: + /* + * DMA Resource + * For this resource the size is static + */ + segment_size = 3; + break; + + case ACPI_RSTYPE_START_DPF: + /* + * Start Dependent Functions Resource + * For a start_dependent_functions Resource, Byte 1, although + * optional, will always be created. + */ + segment_size = 2; + break; + + case ACPI_RSTYPE_END_DPF: + /* + * End Dependent Functions Resource + * For this resource the size is static + */ + segment_size = 1; + break; + + case ACPI_RSTYPE_IO: + /* + * IO Port Resource + * For this resource the size is static + */ + segment_size = 8; + break; + + case ACPI_RSTYPE_FIXED_IO: + /* + * Fixed IO Port Resource + * For this resource the size is static + */ + segment_size = 4; + break; + + case ACPI_RSTYPE_VENDOR: + /* + * Vendor Defined Resource + * For a Vendor Specific resource, if the Length is between 1 and 7 + * it will be created as a Small Resource data type, otherwise it + * is a Large Resource data type. + */ + if (linked_list->data.vendor_specific.length > 7) { + segment_size = 3; + } + else { + segment_size = 1; + } + segment_size += linked_list->data.vendor_specific.length; + break; + + case ACPI_RSTYPE_END_TAG: + /* + * End Tag + * For this resource the size is static + */ + segment_size = 2; + done = TRUE; + break; + + case ACPI_RSTYPE_MEM24: + /* + * 24-Bit Memory Resource + * For this resource the size is static + */ + segment_size = 12; + break; + + case ACPI_RSTYPE_MEM32: + /* + * 32-Bit Memory Range Resource + * For this resource the size is static + */ + segment_size = 20; + break; + + case ACPI_RSTYPE_FIXED_MEM32: + /* + * 32-Bit Fixed Memory Resource + * For this resource the size is static + */ + segment_size = 12; + break; + + case ACPI_RSTYPE_ADDRESS16: + /* + * 16-Bit Address Resource + * The base size of this byte stream is 16. If a Resource Source + * string is not NULL, add 1 for the Index + the length of the null + * terminated string Resource Source + 1 for the null. + */ + segment_size = 16; + + if (linked_list->data.address16.resource_source.string_ptr) { + segment_size += linked_list->data.address16.resource_source.string_length; + segment_size++; + } + break; + + case ACPI_RSTYPE_ADDRESS32: + /* + * 32-Bit Address Resource + * The base size of this byte stream is 26. If a Resource + * Source string is not NULL, add 1 for the Index + the + * length of the null terminated string Resource Source + + * 1 for the null. + */ + segment_size = 26; + + if (linked_list->data.address32.resource_source.string_ptr) { + segment_size += linked_list->data.address32.resource_source.string_length; + segment_size++; + } + break; + + case ACPI_RSTYPE_ADDRESS64: + /* + * 64-Bit Address Resource + * The base size of this byte stream is 46. If a resource_source + * string is not NULL, add 1 for the Index + the length of the null + * terminated string Resource Source + 1 for the null. + */ + segment_size = 46; + + if (linked_list->data.address64.resource_source.string_ptr) { + segment_size += linked_list->data.address64.resource_source.string_length; + segment_size++; + } + break; + + case ACPI_RSTYPE_EXT_IRQ: + /* + * Extended IRQ Resource + * The base size of this byte stream is 9. This is for an Interrupt + * table length of 1. For each additional interrupt, add 4. + * If a Resource Source string is not NULL, add 1 for the + * Index + the length of the null terminated string + * Resource Source + 1 for the null. + */ + segment_size = 9 + + (((acpi_size) linked_list->data.extended_irq.number_of_interrupts - 1) * 4); + + if (linked_list->data.extended_irq.resource_source.string_ptr) { + segment_size += linked_list->data.extended_irq.resource_source.string_length; + segment_size++; + } + break; + + default: + /* + * If we get here, everything is out of sync, exit with error + */ + return_ACPI_STATUS (AE_AML_INVALID_RESOURCE_TYPE); + + } /* switch (linked_list->Id) */ + + /* + * Update the total + */ + byte_stream_size_needed += segment_size; + + /* + * Point to the next object + */ + linked_list = ACPI_PTR_ADD (struct acpi_resource, + linked_list, linked_list->length); + } + + /* + * This is the data the caller needs + */ + *size_needed = byte_stream_size_needed; + return_ACPI_STATUS (AE_OK); +} + + +/******************************************************************************* + * + * FUNCTION: acpi_rs_get_list_length + * + * PARAMETERS: byte_stream_buffer - Pointer to the resource byte stream + * byte_stream_buffer_length - Size of byte_stream_buffer + * size_needed - u32 pointer of the size buffer + * needed to properly return the + * parsed data + * + * RETURN: Status + * + * DESCRIPTION: Takes the resource byte stream and parses it once, calculating + * the size buffer needed to hold the linked list that conveys + * the resource data. + * + ******************************************************************************/ + +acpi_status +acpi_rs_get_list_length ( + u8 *byte_stream_buffer, + u32 byte_stream_buffer_length, + acpi_size *size_needed) +{ + u32 buffer_size = 0; + u32 bytes_parsed = 0; + u8 number_of_interrupts = 0; + u8 number_of_channels = 0; + u8 resource_type; + u32 structure_size; + u32 bytes_consumed; + u8 *buffer; + u8 temp8; + u16 temp16; + u8 index; + u8 additional_bytes; + + + ACPI_FUNCTION_TRACE ("rs_get_list_length"); + + + while (bytes_parsed < byte_stream_buffer_length) { + /* + * The next byte in the stream is the resource type + */ + resource_type = acpi_rs_get_resource_type (*byte_stream_buffer); + + switch (resource_type) { + case ACPI_RDESC_TYPE_MEMORY_24: + /* + * 24-Bit Memory Resource + */ + bytes_consumed = 12; + + structure_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_mem24); + break; + + + case ACPI_RDESC_TYPE_LARGE_VENDOR: + /* + * Vendor Defined Resource + */ + buffer = byte_stream_buffer; + ++buffer; + + ACPI_MOVE_16_TO_16 (&temp16, buffer); + bytes_consumed = temp16 + 3; + + /* + * Ensure a 32-bit boundary for the structure + */ + temp16 = (u16) ACPI_ROUND_UP_to_32_bITS (temp16); + + structure_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_vendor) + + (temp16 * sizeof (u8)); + break; + + + case ACPI_RDESC_TYPE_MEMORY_32: + /* + * 32-Bit Memory Range Resource + */ + bytes_consumed = 20; + + structure_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_mem32); + break; + + + case ACPI_RDESC_TYPE_FIXED_MEMORY_32: + /* + * 32-Bit Fixed Memory Resource + */ + bytes_consumed = 12; + + structure_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_fixed_mem32); + break; + + + case ACPI_RDESC_TYPE_EXTENDED_ADDRESS_SPACE: + /* + * 64-Bit Address Resource + */ + buffer = byte_stream_buffer; + + ++buffer; + ACPI_MOVE_16_TO_16 (&temp16, buffer); + + bytes_consumed = temp16 + 3; + structure_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_address64); + break; + + + case ACPI_RDESC_TYPE_QWORD_ADDRESS_SPACE: + /* + * 64-Bit Address Resource + */ + buffer = byte_stream_buffer; + + ++buffer; + ACPI_MOVE_16_TO_16 (&temp16, buffer); + + bytes_consumed = temp16 + 3; + + /* + * Resource Source Index and Resource Source are optional elements. + * Check the length of the Bytestream. If it is greater than 43, + * that means that an Index exists and is followed by a null + * terminated string. Therefore, set the temp variable to the + * length minus the minimum byte stream length plus the byte for + * the Index to determine the size of the NULL terminated string. + */ + if (43 < temp16) { + temp8 = (u8) (temp16 - 44); + } + else { + temp8 = 0; + } + + /* + * Ensure a 64-bit boundary for the structure + */ + temp8 = (u8) ACPI_ROUND_UP_to_64_bITS (temp8); + + structure_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_address64) + + (temp8 * sizeof (u8)); + break; + + + case ACPI_RDESC_TYPE_DWORD_ADDRESS_SPACE: + /* + * 32-Bit Address Resource + */ + buffer = byte_stream_buffer; + + ++buffer; + ACPI_MOVE_16_TO_16 (&temp16, buffer); + + bytes_consumed = temp16 + 3; + + /* + * Resource Source Index and Resource Source are optional elements. + * Check the length of the Bytestream. If it is greater than 23, + * that means that an Index exists and is followed by a null + * terminated string. Therefore, set the temp variable to the + * length minus the minimum byte stream length plus the byte for + * the Index to determine the size of the NULL terminated string. + */ + if (23 < temp16) { + temp8 = (u8) (temp16 - 24); + } + else { + temp8 = 0; + } + + /* + * Ensure a 32-bit boundary for the structure + */ + temp8 = (u8) ACPI_ROUND_UP_to_32_bITS (temp8); + + structure_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_address32) + + (temp8 * sizeof (u8)); + break; + + + case ACPI_RDESC_TYPE_WORD_ADDRESS_SPACE: + /* + * 16-Bit Address Resource + */ + buffer = byte_stream_buffer; + + ++buffer; + ACPI_MOVE_16_TO_16 (&temp16, buffer); + + bytes_consumed = temp16 + 3; + + /* + * Resource Source Index and Resource Source are optional elements. + * Check the length of the Bytestream. If it is greater than 13, + * that means that an Index exists and is followed by a null + * terminated string. Therefore, set the temp variable to the + * length minus the minimum byte stream length plus the byte for + * the Index to determine the size of the NULL terminated string. + */ + if (13 < temp16) { + temp8 = (u8) (temp16 - 14); + } + else { + temp8 = 0; + } + + /* + * Ensure a 32-bit boundary for the structure + */ + temp8 = (u8) ACPI_ROUND_UP_to_32_bITS (temp8); + + structure_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_address16) + + (temp8 * sizeof (u8)); + break; + + + case ACPI_RDESC_TYPE_EXTENDED_XRUPT: + /* + * Extended IRQ + */ + buffer = byte_stream_buffer; + + ++buffer; + ACPI_MOVE_16_TO_16 (&temp16, buffer); + + bytes_consumed = temp16 + 3; + + /* + * Point past the length field and the Interrupt vector flags to + * save off the Interrupt table length to the Temp8 variable. + */ + buffer += 3; + temp8 = *buffer; + + /* + * To compensate for multiple interrupt numbers, add 4 bytes for + * each additional interrupts greater than 1 + */ + additional_bytes = (u8) ((temp8 - 1) * 4); + + /* + * Resource Source Index and Resource Source are optional elements. + * Check the length of the Bytestream. If it is greater than 9, + * that means that an Index exists and is followed by a null + * terminated string. Therefore, set the temp variable to the + * length minus the minimum byte stream length plus the byte for + * the Index to determine the size of the NULL terminated string. + */ + if (9 + additional_bytes < temp16) { + temp8 = (u8) (temp16 - (9 + additional_bytes)); + } + else { + temp8 = 0; + } + + /* + * Ensure a 32-bit boundary for the structure + */ + temp8 = (u8) ACPI_ROUND_UP_to_32_bITS (temp8); + + structure_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_ext_irq) + + (additional_bytes * sizeof (u8)) + + (temp8 * sizeof (u8)); + break; + + + case ACPI_RDESC_TYPE_IRQ_FORMAT: + /* + * IRQ Resource. + * Determine if it there are two or three trailing bytes + */ + buffer = byte_stream_buffer; + temp8 = *buffer; + + if(temp8 & 0x01) { + bytes_consumed = 4; + } + else { + bytes_consumed = 3; + } + + /* Point past the descriptor */ + + ++buffer; + + /* + * Look at the number of bits set + */ + ACPI_MOVE_16_TO_16 (&temp16, buffer); + + for (index = 0; index < 16; index++) { + if (temp16 & 0x1) { + ++number_of_interrupts; + } + + temp16 >>= 1; + } + + structure_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_io) + + (number_of_interrupts * sizeof (u32)); + break; + + + case ACPI_RDESC_TYPE_DMA_FORMAT: + /* + * DMA Resource + */ + buffer = byte_stream_buffer; + bytes_consumed = 3; + + /* Point past the descriptor */ + + ++buffer; + + /* + * Look at the number of bits set + */ + temp8 = *buffer; + + for(index = 0; index < 8; index++) { + if(temp8 & 0x1) { + ++number_of_channels; + } + + temp8 >>= 1; + } + + structure_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_dma) + + (number_of_channels * sizeof (u32)); + break; + + + case ACPI_RDESC_TYPE_START_DEPENDENT: + /* + * Start Dependent Functions Resource + * Determine if it there are two or three trailing bytes + */ + buffer = byte_stream_buffer; + temp8 = *buffer; + + if(temp8 & 0x01) { + bytes_consumed = 2; + } + else { + bytes_consumed = 1; + } + + structure_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_start_dpf); + break; + + + case ACPI_RDESC_TYPE_END_DEPENDENT: + /* + * End Dependent Functions Resource + */ + bytes_consumed = 1; + structure_size = ACPI_RESOURCE_LENGTH; + break; + + + case ACPI_RDESC_TYPE_IO_PORT: + /* + * IO Port Resource + */ + bytes_consumed = 8; + structure_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_io); + break; + + + case ACPI_RDESC_TYPE_FIXED_IO_PORT: + /* + * Fixed IO Port Resource + */ + bytes_consumed = 4; + structure_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_fixed_io); + break; + + + case ACPI_RDESC_TYPE_SMALL_VENDOR: + /* + * Vendor Specific Resource + */ + buffer = byte_stream_buffer; + + temp8 = *buffer; + temp8 = (u8) (temp8 & 0x7); + bytes_consumed = temp8 + 1; + + /* + * Ensure a 32-bit boundary for the structure + */ + temp8 = (u8) ACPI_ROUND_UP_to_32_bITS (temp8); + structure_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_vendor) + + (temp8 * sizeof (u8)); + break; + + + case ACPI_RDESC_TYPE_END_TAG: + /* + * End Tag + */ + bytes_consumed = 2; + structure_size = ACPI_RESOURCE_LENGTH; + byte_stream_buffer_length = bytes_parsed; + break; + + + default: + /* + * If we get here, everything is out of sync, + * exit with an error + */ + return_ACPI_STATUS (AE_AML_INVALID_RESOURCE_TYPE); + } + + /* + * Update the return value and counter + */ + buffer_size += (u32) ACPI_ALIGN_RESOURCE_SIZE (structure_size); + bytes_parsed += bytes_consumed; + + /* + * Set the byte stream to point to the next resource + */ + byte_stream_buffer += bytes_consumed; + } + + /* + * This is the data the caller needs + */ + *size_needed = buffer_size; + return_ACPI_STATUS (AE_OK); +} + + +/******************************************************************************* + * + * FUNCTION: acpi_rs_get_pci_routing_table_length + * + * PARAMETERS: package_object - Pointer to the package object + * buffer_size_needed - u32 pointer of the size buffer + * needed to properly return the + * parsed data + * + * RETURN: Status + * + * DESCRIPTION: Given a package representing a PCI routing table, this + * calculates the size of the corresponding linked list of + * descriptions. + * + ******************************************************************************/ + +acpi_status +acpi_rs_get_pci_routing_table_length ( + union acpi_operand_object *package_object, + acpi_size *buffer_size_needed) +{ + u32 number_of_elements; + acpi_size temp_size_needed = 0; + union acpi_operand_object **top_object_list; + u32 index; + union acpi_operand_object *package_element; + union acpi_operand_object **sub_object_list; + u8 name_found; + u32 table_index; + + + ACPI_FUNCTION_TRACE ("rs_get_pci_routing_table_length"); + + + number_of_elements = package_object->package.count; + + /* + * Calculate the size of the return buffer. + * The base size is the number of elements * the sizes of the + * structures. Additional space for the strings is added below. + * The minus one is to subtract the size of the u8 Source[1] + * member because it is added below. + * + * But each PRT_ENTRY structure has a pointer to a string and + * the size of that string must be found. + */ + top_object_list = package_object->package.elements; + + for (index = 0; index < number_of_elements; index++) { + /* + * Dereference the sub-package + */ + package_element = *top_object_list; + + /* + * The sub_object_list will now point to an array of the + * four IRQ elements: Address, Pin, Source and source_index + */ + sub_object_list = package_element->package.elements; + + /* + * Scan the irq_table_elements for the Source Name String + */ + name_found = FALSE; + + for (table_index = 0; table_index < 4 && !name_found; table_index++) { + if ((ACPI_TYPE_STRING == ACPI_GET_OBJECT_TYPE (*sub_object_list)) || + ((ACPI_TYPE_LOCAL_REFERENCE == ACPI_GET_OBJECT_TYPE (*sub_object_list)) && + ((*sub_object_list)->reference.opcode == AML_INT_NAMEPATH_OP))) { + name_found = TRUE; + } + else { + /* + * Look at the next element + */ + sub_object_list++; + } + } + + temp_size_needed += (sizeof (struct acpi_pci_routing_table) - 4); + + /* + * Was a String type found? + */ + if (name_found) { + if (ACPI_GET_OBJECT_TYPE (*sub_object_list) == ACPI_TYPE_STRING) { + /* + * The length String.Length field does not include the + * terminating NULL, add 1 + */ + temp_size_needed += ((acpi_size) (*sub_object_list)->string.length + 1); + } + else { + temp_size_needed += acpi_ns_get_pathname_length ( + (*sub_object_list)->reference.node); + } + } + else { + /* + * If no name was found, then this is a NULL, which is + * translated as a u32 zero. + */ + temp_size_needed += sizeof (u32); + } + + /* Round up the size since each element must be aligned */ + + temp_size_needed = ACPI_ROUND_UP_to_64_bITS (temp_size_needed); + + /* + * Point to the next union acpi_operand_object + */ + top_object_list++; + } + + /* + * Adding an extra element to the end of the list, essentially a NULL terminator + */ + *buffer_size_needed = temp_size_needed + sizeof (struct acpi_pci_routing_table); + return_ACPI_STATUS (AE_OK); +} |