summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
authorIngo Molnar <mingo@elte.hu>2008-12-23 16:30:31 +0100
committerIngo Molnar <mingo@elte.hu>2008-12-23 16:30:31 +0100
commitbed4f13065b520e564adffbfcd1c1a764a9c887e (patch)
treed847ddd3bab64cb126ee6679dc4a949386554d55 /arch
parent3e5621edb3392b28efb260ac99b2d26fb8b44e73 (diff)
parentbf8bd66d0580f296f257d371ee41a0a137b541c7 (diff)
downloadop-kernel-dev-bed4f13065b520e564adffbfcd1c1a764a9c887e.zip
op-kernel-dev-bed4f13065b520e564adffbfcd1c1a764a9c887e.tar.gz
Merge branch 'x86/irq' into x86/core
Diffstat (limited to 'arch')
-rw-r--r--arch/x86/include/asm/dwarf2.h97
-rw-r--r--arch/x86/include/asm/hardirq_32.h2
-rw-r--r--arch/x86/include/asm/hardirq_64.h2
-rw-r--r--arch/x86/include/asm/hw_irq.h4
-rw-r--r--arch/x86/include/asm/linkage.h60
-rw-r--r--arch/x86/kernel/apic.c13
-rw-r--r--arch/x86/kernel/cpu/mcheck/mce_amd_64.c2
-rw-r--r--arch/x86/kernel/cpu/mcheck/mce_intel_64.c2
-rw-r--r--arch/x86/kernel/entry_32.S476
-rw-r--r--arch/x86/kernel/entry_64.S1231
-rw-r--r--arch/x86/kernel/irqinit_32.c2
-rw-r--r--arch/x86/kernel/irqinit_64.c66
-rw-r--r--arch/x86/kernel/smp.c18
-rw-r--r--arch/x86/kernel/time_32.c2
-rw-r--r--arch/x86/kernel/time_64.c2
-rw-r--r--arch/x86/kernel/tlb_32.c2
-rw-r--r--arch/x86/kernel/tlb_64.c2
-rw-r--r--arch/x86/kernel/traps.c6
-rw-r--r--arch/x86/lguest/boot.c3
19 files changed, 1054 insertions, 938 deletions
diff --git a/arch/x86/include/asm/dwarf2.h b/arch/x86/include/asm/dwarf2.h
index 804b6e6..3afc5e8 100644
--- a/arch/x86/include/asm/dwarf2.h
+++ b/arch/x86/include/asm/dwarf2.h
@@ -6,56 +6,91 @@
#endif
/*
- Macros for dwarf2 CFI unwind table entries.
- See "as.info" for details on these pseudo ops. Unfortunately
- they are only supported in very new binutils, so define them
- away for older version.
+ * Macros for dwarf2 CFI unwind table entries.
+ * See "as.info" for details on these pseudo ops. Unfortunately
+ * they are only supported in very new binutils, so define them
+ * away for older version.
*/
#ifdef CONFIG_AS_CFI
-#define CFI_STARTPROC .cfi_startproc
-#define CFI_ENDPROC .cfi_endproc
-#define CFI_DEF_CFA .cfi_def_cfa
-#define CFI_DEF_CFA_REGISTER .cfi_def_cfa_register
-#define CFI_DEF_CFA_OFFSET .cfi_def_cfa_offset
-#define CFI_ADJUST_CFA_OFFSET .cfi_adjust_cfa_offset
-#define CFI_OFFSET .cfi_offset
-#define CFI_REL_OFFSET .cfi_rel_offset
-#define CFI_REGISTER .cfi_register
-#define CFI_RESTORE .cfi_restore
-#define CFI_REMEMBER_STATE .cfi_remember_state
-#define CFI_RESTORE_STATE .cfi_restore_state
-#define CFI_UNDEFINED .cfi_undefined
+#define CFI_STARTPROC .cfi_startproc
+#define CFI_ENDPROC .cfi_endproc
+#define CFI_DEF_CFA .cfi_def_cfa
+#define CFI_DEF_CFA_REGISTER .cfi_def_cfa_register
+#define CFI_DEF_CFA_OFFSET .cfi_def_cfa_offset
+#define CFI_ADJUST_CFA_OFFSET .cfi_adjust_cfa_offset
+#define CFI_OFFSET .cfi_offset
+#define CFI_REL_OFFSET .cfi_rel_offset
+#define CFI_REGISTER .cfi_register
+#define CFI_RESTORE .cfi_restore
+#define CFI_REMEMBER_STATE .cfi_remember_state
+#define CFI_RESTORE_STATE .cfi_restore_state
+#define CFI_UNDEFINED .cfi_undefined
#ifdef CONFIG_AS_CFI_SIGNAL_FRAME
-#define CFI_SIGNAL_FRAME .cfi_signal_frame
+#define CFI_SIGNAL_FRAME .cfi_signal_frame
#else
#define CFI_SIGNAL_FRAME
#endif
#else
-/* Due to the structure of pre-exisiting code, don't use assembler line
- comment character # to ignore the arguments. Instead, use a dummy macro. */
+/*
+ * Due to the structure of pre-exisiting code, don't use assembler line
+ * comment character # to ignore the arguments. Instead, use a dummy macro.
+ */
.macro cfi_ignore a=0, b=0, c=0, d=0
.endm
-#define CFI_STARTPROC cfi_ignore
-#define CFI_ENDPROC cfi_ignore
-#define CFI_DEF_CFA cfi_ignore
+#define CFI_STARTPROC cfi_ignore
+#define CFI_ENDPROC cfi_ignore
+#define CFI_DEF_CFA cfi_ignore
#define CFI_DEF_CFA_REGISTER cfi_ignore
#define CFI_DEF_CFA_OFFSET cfi_ignore
#define CFI_ADJUST_CFA_OFFSET cfi_ignore
-#define CFI_OFFSET cfi_ignore
-#define CFI_REL_OFFSET cfi_ignore
-#define CFI_REGISTER cfi_ignore
-#define CFI_RESTORE cfi_ignore
-#define CFI_REMEMBER_STATE cfi_ignore
-#define CFI_RESTORE_STATE cfi_ignore
-#define CFI_UNDEFINED cfi_ignore
-#define CFI_SIGNAL_FRAME cfi_ignore
+#define CFI_OFFSET cfi_ignore
+#define CFI_REL_OFFSET cfi_ignore
+#define CFI_REGISTER cfi_ignore
+#define CFI_RESTORE cfi_ignore
+#define CFI_REMEMBER_STATE cfi_ignore
+#define CFI_RESTORE_STATE cfi_ignore
+#define CFI_UNDEFINED cfi_ignore
+#define CFI_SIGNAL_FRAME cfi_ignore
#endif
+/*
+ * An attempt to make CFI annotations more or less
+ * correct and shorter. It is implied that you know
+ * what you're doing if you use them.
+ */
+#ifdef __ASSEMBLY__
+#ifdef CONFIG_X86_64
+ .macro pushq_cfi reg
+ pushq \reg
+ CFI_ADJUST_CFA_OFFSET 8
+ .endm
+
+ .macro popq_cfi reg
+ popq \reg
+ CFI_ADJUST_CFA_OFFSET -8
+ .endm
+
+ .macro movq_cfi reg offset=0
+ movq %\reg, \offset(%rsp)
+ CFI_REL_OFFSET \reg, \offset
+ .endm
+
+ .macro movq_cfi_restore offset reg
+ movq \offset(%rsp), %\reg
+ CFI_RESTORE \reg
+ .endm
+#else /*!CONFIG_X86_64*/
+
+ /* 32bit defenitions are missed yet */
+
+#endif /*!CONFIG_X86_64*/
+#endif /*__ASSEMBLY__*/
+
#endif /* _ASM_X86_DWARF2_H */
diff --git a/arch/x86/include/asm/hardirq_32.h b/arch/x86/include/asm/hardirq_32.h
index 5ca135e..cf7954d 100644
--- a/arch/x86/include/asm/hardirq_32.h
+++ b/arch/x86/include/asm/hardirq_32.h
@@ -22,6 +22,8 @@ DECLARE_PER_CPU(irq_cpustat_t, irq_stat);
#define __ARCH_IRQ_STAT
#define __IRQ_STAT(cpu, member) (per_cpu(irq_stat, cpu).member)
+#define inc_irq_stat(member) (__get_cpu_var(irq_stat).member++)
+
void ack_bad_irq(unsigned int irq);
#include <linux/irq_cpustat.h>
diff --git a/arch/x86/include/asm/hardirq_64.h b/arch/x86/include/asm/hardirq_64.h
index 1ba381f..b5a6b5d 100644
--- a/arch/x86/include/asm/hardirq_64.h
+++ b/arch/x86/include/asm/hardirq_64.h
@@ -11,6 +11,8 @@
#define __ARCH_IRQ_STAT 1
+#define inc_irq_stat(member) add_pda(member, 1)
+
#define local_softirq_pending() read_pda(__softirq_pending)
#define __ARCH_SET_SOFTIRQ_PENDING 1
diff --git a/arch/x86/include/asm/hw_irq.h b/arch/x86/include/asm/hw_irq.h
index b97aecb..8de644b6 100644
--- a/arch/x86/include/asm/hw_irq.h
+++ b/arch/x86/include/asm/hw_irq.h
@@ -109,9 +109,7 @@ extern asmlinkage void smp_invalidate_interrupt(struct pt_regs *);
#endif
#endif
-#ifdef CONFIG_X86_32
-extern void (*const interrupt[NR_VECTORS])(void);
-#endif
+extern void (*__initconst interrupt[NR_VECTORS-FIRST_EXTERNAL_VECTOR])(void);
typedef int vector_irq_t[NR_VECTORS];
DECLARE_PER_CPU(vector_irq_t, vector_irq);
diff --git a/arch/x86/include/asm/linkage.h b/arch/x86/include/asm/linkage.h
index f61ee8f..5d98d0b6 100644
--- a/arch/x86/include/asm/linkage.h
+++ b/arch/x86/include/asm/linkage.h
@@ -57,5 +57,65 @@
#define __ALIGN_STR ".align 16,0x90"
#endif
+/*
+ * to check ENTRY_X86/END_X86 and
+ * KPROBE_ENTRY_X86/KPROBE_END_X86
+ * unbalanced-missed-mixed appearance
+ */
+#define __set_entry_x86 .set ENTRY_X86_IN, 0
+#define __unset_entry_x86 .set ENTRY_X86_IN, 1
+#define __set_kprobe_x86 .set KPROBE_X86_IN, 0
+#define __unset_kprobe_x86 .set KPROBE_X86_IN, 1
+
+#define __macro_err_x86 .error "ENTRY_X86/KPROBE_X86 unbalanced,missed,mixed"
+
+#define __check_entry_x86 \
+ .ifdef ENTRY_X86_IN; \
+ .ifeq ENTRY_X86_IN; \
+ __macro_err_x86; \
+ .abort; \
+ .endif; \
+ .endif
+
+#define __check_kprobe_x86 \
+ .ifdef KPROBE_X86_IN; \
+ .ifeq KPROBE_X86_IN; \
+ __macro_err_x86; \
+ .abort; \
+ .endif; \
+ .endif
+
+#define __check_entry_kprobe_x86 \
+ __check_entry_x86; \
+ __check_kprobe_x86
+
+#define ENTRY_KPROBE_FINAL_X86 __check_entry_kprobe_x86
+
+#define ENTRY_X86(name) \
+ __check_entry_kprobe_x86; \
+ __set_entry_x86; \
+ .globl name; \
+ __ALIGN; \
+ name:
+
+#define END_X86(name) \
+ __unset_entry_x86; \
+ __check_entry_kprobe_x86; \
+ .size name, .-name
+
+#define KPROBE_ENTRY_X86(name) \
+ __check_entry_kprobe_x86; \
+ __set_kprobe_x86; \
+ .pushsection .kprobes.text, "ax"; \
+ .globl name; \
+ __ALIGN; \
+ name:
+
+#define KPROBE_END_X86(name) \
+ __unset_kprobe_x86; \
+ __check_entry_kprobe_x86; \
+ .size name, .-name; \
+ .popsection
+
#endif /* _ASM_X86_LINKAGE_H */
diff --git a/arch/x86/kernel/apic.c b/arch/x86/kernel/apic.c
index 20c6e12..7397911 100644
--- a/arch/x86/kernel/apic.c
+++ b/arch/x86/kernel/apic.c
@@ -777,11 +777,7 @@ static void local_apic_timer_interrupt(void)
/*
* the NMI deadlock-detector uses this.
*/
-#ifdef CONFIG_X86_64
- add_pda(apic_timer_irqs, 1);
-#else
- per_cpu(irq_stat, cpu).apic_timer_irqs++;
-#endif
+ inc_irq_stat(apic_timer_irqs);
evt->event_handler(evt);
}
@@ -1677,14 +1673,11 @@ void smp_spurious_interrupt(struct pt_regs *regs)
if (v & (1 << (SPURIOUS_APIC_VECTOR & 0x1f)))
ack_APIC_irq();
-#ifdef CONFIG_X86_64
- add_pda(irq_spurious_count, 1);
-#else
+ inc_irq_stat(irq_spurious_count);
+
/* see sw-dev-man vol 3, chapter 7.4.13.5 */
pr_info("spurious APIC interrupt on CPU#%d, "
"should never happen.\n", smp_processor_id());
- __get_cpu_var(irq_stat).irq_spurious_count++;
-#endif
irq_exit();
}
diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd_64.c b/arch/x86/kernel/cpu/mcheck/mce_amd_64.c
index 5eb390a..748c8f9 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd_64.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd_64.c
@@ -237,7 +237,7 @@ asmlinkage void mce_threshold_interrupt(void)
}
}
out:
- add_pda(irq_threshold_count, 1);
+ inc_irq_stat(irq_threshold_count);
irq_exit();
}
diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel_64.c b/arch/x86/kernel/cpu/mcheck/mce_intel_64.c
index c17eaf5..4b48f25 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_intel_64.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_intel_64.c
@@ -26,7 +26,7 @@ asmlinkage void smp_thermal_interrupt(void)
if (therm_throt_process(msr_val & 1))
mce_log_therm_throt_event(smp_processor_id(), msr_val);
- add_pda(irq_thermal_count, 1);
+ inc_irq_stat(irq_thermal_count);
irq_exit();
}
diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index f6402c4..fe70141 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -619,28 +619,37 @@ END(syscall_badsys)
27:;
/*
- * Build the entry stubs and pointer table with
- * some assembler magic.
+ * Build the entry stubs and pointer table with some assembler magic.
+ * We pack 7 stubs into a single 32-byte chunk, which will fit in a
+ * single cache line on all modern x86 implementations.
*/
-.section .rodata,"a"
+.section .init.rodata,"a"
ENTRY(interrupt)
.text
-
+ .p2align 5
+ .p2align CONFIG_X86_L1_CACHE_SHIFT
ENTRY(irq_entries_start)
RING0_INT_FRAME
-vector=0
-.rept NR_VECTORS
- ALIGN
- .if vector
+vector=FIRST_EXTERNAL_VECTOR
+.rept (NR_VECTORS-FIRST_EXTERNAL_VECTOR+6)/7
+ .balign 32
+ .rept 7
+ .if vector < NR_VECTORS
+ .if vector <> FIRST_EXTERNAL_VECTOR
CFI_ADJUST_CFA_OFFSET -4
- .endif
-1: pushl $~(vector)
+ .endif
+1: pushl $(~vector+0x80) /* Note: always in signed byte range */
CFI_ADJUST_CFA_OFFSET 4
- jmp common_interrupt
- .previous
+ .if ((vector-FIRST_EXTERNAL_VECTOR)%7) <> 6
+ jmp 2f
+ .endif
+ .previous
.long 1b
- .text
+ .text
vector=vector+1
+ .endif
+ .endr
+2: jmp common_interrupt
.endr
END(irq_entries_start)
@@ -652,8 +661,9 @@ END(interrupt)
* the CPU automatically disables interrupts when executing an IRQ vector,
* so IRQ-flags tracing has to follow that:
*/
- ALIGN
+ .p2align CONFIG_X86_L1_CACHE_SHIFT
common_interrupt:
+ addl $-0x80,(%esp) /* Adjust vector into the [-256,-1] range */
SAVE_ALL
TRACE_IRQS_OFF
movl %esp,%eax
@@ -678,65 +688,6 @@ ENDPROC(name)
/* The include is where all of the SMP etc. interrupts come from */
#include "entry_arch.h"
-KPROBE_ENTRY(page_fault)
- RING0_EC_FRAME
- pushl $do_page_fault
- CFI_ADJUST_CFA_OFFSET 4
- ALIGN
-error_code:
- /* the function address is in %fs's slot on the stack */
- pushl %es
- CFI_ADJUST_CFA_OFFSET 4
- /*CFI_REL_OFFSET es, 0*/
- pushl %ds
- CFI_ADJUST_CFA_OFFSET 4
- /*CFI_REL_OFFSET ds, 0*/
- pushl %eax
- CFI_ADJUST_CFA_OFFSET 4
- CFI_REL_OFFSET eax, 0
- pushl %ebp
- CFI_ADJUST_CFA_OFFSET 4
- CFI_REL_OFFSET ebp, 0
- pushl %edi
- CFI_ADJUST_CFA_OFFSET 4
- CFI_REL_OFFSET edi, 0
- pushl %esi
- CFI_ADJUST_CFA_OFFSET 4
- CFI_REL_OFFSET esi, 0
- pushl %edx
- CFI_ADJUST_CFA_OFFSET 4
- CFI_REL_OFFSET edx, 0
- pushl %ecx
- CFI_ADJUST_CFA_OFFSET 4
- CFI_REL_OFFSET ecx, 0
- pushl %ebx
- CFI_ADJUST_CFA_OFFSET 4
- CFI_REL_OFFSET ebx, 0
- cld
- pushl %fs
- CFI_ADJUST_CFA_OFFSET 4
- /*CFI_REL_OFFSET fs, 0*/
- movl $(__KERNEL_PERCPU), %ecx
- movl %ecx, %fs
- UNWIND_ESPFIX_STACK
- popl %ecx
- CFI_ADJUST_CFA_OFFSET -4
- /*CFI_REGISTER es, ecx*/
- movl PT_FS(%esp), %edi # get the function address
- movl PT_ORIG_EAX(%esp), %edx # get the error code
- movl $-1, PT_ORIG_EAX(%esp) # no syscall to restart
- mov %ecx, PT_FS(%esp)
- /*CFI_REL_OFFSET fs, ES*/
- movl $(__USER_DS), %ecx
- movl %ecx, %ds
- movl %ecx, %es
- TRACE_IRQS_OFF
- movl %esp,%eax # pt_regs pointer
- call *%edi
- jmp ret_from_exception
- CFI_ENDPROC
-KPROBE_END(page_fault)
-
ENTRY(coprocessor_error)
RING0_INT_FRAME
pushl $0
@@ -767,140 +718,6 @@ ENTRY(device_not_available)
CFI_ENDPROC
END(device_not_available)
-/*
- * Debug traps and NMI can happen at the one SYSENTER instruction
- * that sets up the real kernel stack. Check here, since we can't
- * allow the wrong stack to be used.
- *
- * "TSS_sysenter_sp0+12" is because the NMI/debug handler will have
- * already pushed 3 words if it hits on the sysenter instruction:
- * eflags, cs and eip.
- *
- * We just load the right stack, and push the three (known) values
- * by hand onto the new stack - while updating the return eip past
- * the instruction that would have done it for sysenter.
- */
-#define FIX_STACK(offset, ok, label) \
- cmpw $__KERNEL_CS,4(%esp); \
- jne ok; \
-label: \
- movl TSS_sysenter_sp0+offset(%esp),%esp; \
- CFI_DEF_CFA esp, 0; \
- CFI_UNDEFINED eip; \
- pushfl; \
- CFI_ADJUST_CFA_OFFSET 4; \
- pushl $__KERNEL_CS; \
- CFI_ADJUST_CFA_OFFSET 4; \
- pushl $sysenter_past_esp; \
- CFI_ADJUST_CFA_OFFSET 4; \
- CFI_REL_OFFSET eip, 0
-
-KPROBE_ENTRY(debug)
- RING0_INT_FRAME
- cmpl $ia32_sysenter_target,(%esp)
- jne debug_stack_correct
- FIX_STACK(12, debug_stack_correct, debug_esp_fix_insn)
-debug_stack_correct:
- pushl $-1 # mark this as an int
- CFI_ADJUST_CFA_OFFSET 4
- SAVE_ALL
- TRACE_IRQS_OFF
- xorl %edx,%edx # error code 0
- movl %esp,%eax # pt_regs pointer
- call do_debug
- jmp ret_from_exception
- CFI_ENDPROC
-KPROBE_END(debug)
-
-/*
- * NMI is doubly nasty. It can happen _while_ we're handling
- * a debug fault, and the debug fault hasn't yet been able to
- * clear up the stack. So we first check whether we got an
- * NMI on the sysenter entry path, but after that we need to
- * check whether we got an NMI on the debug path where the debug
- * fault happened on the sysenter path.
- */
-KPROBE_ENTRY(nmi)
- RING0_INT_FRAME
- pushl %eax
- CFI_ADJUST_CFA_OFFSET 4
- movl %ss, %eax
- cmpw $__ESPFIX_SS, %ax
- popl %eax
- CFI_ADJUST_CFA_OFFSET -4
- je nmi_espfix_stack
- cmpl $ia32_sysenter_target,(%esp)
- je nmi_stack_fixup
- pushl %eax
- CFI_ADJUST_CFA_OFFSET 4
- movl %esp,%eax
- /* Do not access memory above the end of our stack page,
- * it might not exist.
- */
- andl $(THREAD_SIZE-1),%eax
- cmpl $(THREAD_SIZE-20),%eax
- popl %eax
- CFI_ADJUST_CFA_OFFSET -4
- jae nmi_stack_correct
- cmpl $ia32_sysenter_target,12(%esp)
- je nmi_debug_stack_check
-nmi_stack_correct:
- /* We have a RING0_INT_FRAME here */
- pushl %eax
- CFI_ADJUST_CFA_OFFSET 4
- SAVE_ALL
- TRACE_IRQS_OFF
- xorl %edx,%edx # zero error code
- movl %esp,%eax # pt_regs pointer
- call do_nmi
- jmp restore_nocheck_notrace
- CFI_ENDPROC
-
-nmi_stack_fixup:
- RING0_INT_FRAME
- FIX_STACK(12,nmi_stack_correct, 1)
- jmp nmi_stack_correct
-
-nmi_debug_stack_check:
- /* We have a RING0_INT_FRAME here */
- cmpw $__KERNEL_CS,16(%esp)
- jne nmi_stack_correct
- cmpl $debug,(%esp)
- jb nmi_stack_correct
- cmpl $debug_esp_fix_insn,(%esp)
- ja nmi_stack_correct
- FIX_STACK(24,nmi_stack_correct, 1)
- jmp nmi_stack_correct
-
-nmi_espfix_stack:
- /* We have a RING0_INT_FRAME here.
- *
- * create the pointer to lss back
- */
- pushl %ss
- CFI_ADJUST_CFA_OFFSET 4
- pushl %esp
- CFI_ADJUST_CFA_OFFSET 4
- addw $4, (%esp)
- /* copy the iret frame of 12 bytes */
- .rept 3
- pushl 16(%esp)
- CFI_ADJUST_CFA_OFFSET 4
- .endr
- pushl %eax
- CFI_ADJUST_CFA_OFFSET 4
- SAVE_ALL
- TRACE_IRQS_OFF
- FIXUP_ESPFIX_STACK # %eax == %esp
- xorl %edx,%edx # zero error code
- call do_nmi
- RESTORE_REGS
- lss 12+4(%esp), %esp # back to espfix stack
- CFI_ADJUST_CFA_OFFSET -24
- jmp irq_return
- CFI_ENDPROC
-KPROBE_END(nmi)
-
#ifdef CONFIG_PARAVIRT
ENTRY(native_iret)
iret
@@ -916,19 +733,6 @@ ENTRY(native_irq_enable_sysexit)
END(native_irq_enable_sysexit)
#endif
-KPROBE_ENTRY(int3)
- RING0_INT_FRAME
- pushl $-1 # mark this as an int
- CFI_ADJUST_CFA_OFFSET 4
- SAVE_ALL
- TRACE_IRQS_OFF
- xorl %edx,%edx # zero error code
- movl %esp,%eax # pt_regs pointer
- call do_int3
- jmp ret_from_exception
- CFI_ENDPROC
-KPROBE_END(int3)
-
ENTRY(overflow)
RING0_INT_FRAME
pushl $0
@@ -993,14 +797,6 @@ ENTRY(stack_segment)
CFI_ENDPROC
END(stack_segment)
-KPROBE_ENTRY(general_protection)
- RING0_EC_FRAME
- pushl $do_general_protection
- CFI_ADJUST_CFA_OFFSET 4
- jmp error_code
- CFI_ENDPROC
-KPROBE_END(general_protection)
-
ENTRY(alignment_check)
RING0_EC_FRAME
pushl $do_alignment_check
@@ -1211,3 +1007,227 @@ END(mcount)
#include "syscall_table_32.S"
syscall_table_size=(.-sys_call_table)
+
+/*
+ * Some functions should be protected against kprobes
+ */
+ .pushsection .kprobes.text, "ax"
+
+ENTRY(page_fault)
+ RING0_EC_FRAME
+ pushl $do_page_fault
+ CFI_ADJUST_CFA_OFFSET 4
+ ALIGN
+error_code:
+ /* the function address is in %fs's slot on the stack */
+ pushl %es
+ CFI_ADJUST_CFA_OFFSET 4
+ /*CFI_REL_OFFSET es, 0*/
+ pushl %ds
+ CFI_ADJUST_CFA_OFFSET 4
+ /*CFI_REL_OFFSET ds, 0*/
+ pushl %eax
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET eax, 0
+ pushl %ebp
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET ebp, 0
+ pushl %edi
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET edi, 0
+ pushl %esi
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET esi, 0
+ pushl %edx
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET edx, 0
+ pushl %ecx
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET ecx, 0
+ pushl %ebx
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET ebx, 0
+ cld
+ pushl %fs
+ CFI_ADJUST_CFA_OFFSET 4
+ /*CFI_REL_OFFSET fs, 0*/
+ movl $(__KERNEL_PERCPU), %ecx
+ movl %ecx, %fs
+ UNWIND_ESPFIX_STACK
+ popl %ecx
+ CFI_ADJUST_CFA_OFFSET -4
+ /*CFI_REGISTER es, ecx*/
+ movl PT_FS(%esp), %edi # get the function address
+ movl PT_ORIG_EAX(%esp), %edx # get the error code
+ movl $-1, PT_ORIG_EAX(%esp) # no syscall to restart
+ mov %ecx, PT_FS(%esp)
+ /*CFI_REL_OFFSET fs, ES*/
+ movl $(__USER_DS), %ecx
+ movl %ecx, %ds
+ movl %ecx, %es
+ TRACE_IRQS_OFF
+ movl %esp,%eax # pt_regs pointer
+ call *%edi
+ jmp ret_from_exception
+ CFI_ENDPROC
+END(page_fault)
+
+/*
+ * Debug traps and NMI can happen at the one SYSENTER instruction
+ * that sets up the real kernel stack. Check here, since we can't
+ * allow the wrong stack to be used.
+ *
+ * "TSS_sysenter_sp0+12" is because the NMI/debug handler will have
+ * already pushed 3 words if it hits on the sysenter instruction:
+ * eflags, cs and eip.
+ *
+ * We just load the right stack, and push the three (known) values
+ * by hand onto the new stack - while updating the return eip past
+ * the instruction that would have done it for sysenter.
+ */
+#define FIX_STACK(offset, ok, label) \
+ cmpw $__KERNEL_CS,4(%esp); \
+ jne ok; \
+label: \
+ movl TSS_sysenter_sp0+offset(%esp),%esp; \
+ CFI_DEF_CFA esp, 0; \
+ CFI_UNDEFINED eip; \
+ pushfl; \
+ CFI_ADJUST_CFA_OFFSET 4; \
+ pushl $__KERNEL_CS; \
+ CFI_ADJUST_CFA_OFFSET 4; \
+ pushl $sysenter_past_esp; \
+ CFI_ADJUST_CFA_OFFSET 4; \
+ CFI_REL_OFFSET eip, 0
+
+ENTRY(debug)
+ RING0_INT_FRAME
+ cmpl $ia32_sysenter_target,(%esp)
+ jne debug_stack_correct
+ FIX_STACK(12, debug_stack_correct, debug_esp_fix_insn)
+debug_stack_correct:
+ pushl $-1 # mark this as an int
+ CFI_ADJUST_CFA_OFFSET 4
+ SAVE_ALL
+ TRACE_IRQS_OFF
+ xorl %edx,%edx # error code 0
+ movl %esp,%eax # pt_regs pointer
+ call do_debug
+ jmp ret_from_exception
+ CFI_ENDPROC
+END(debug)
+
+/*
+ * NMI is doubly nasty. It can happen _while_ we're handling
+ * a debug fault, and the debug fault hasn't yet been able to
+ * clear up the stack. So we first check whether we got an
+ * NMI on the sysenter entry path, but after that we need to
+ * check whether we got an NMI on the debug path where the debug
+ * fault happened on the sysenter path.
+ */
+ENTRY(nmi)
+ RING0_INT_FRAME
+ pushl %eax
+ CFI_ADJUST_CFA_OFFSET 4
+ movl %ss, %eax
+ cmpw $__ESPFIX_SS, %ax
+ popl %eax
+ CFI_ADJUST_CFA_OFFSET -4
+ je nmi_espfix_stack
+ cmpl $ia32_sysenter_target,(%esp)
+ je nmi_stack_fixup
+ pushl %eax
+ CFI_ADJUST_CFA_OFFSET 4
+ movl %esp,%eax
+ /* Do not access memory above the end of our stack page,
+ * it might not exist.
+ */
+ andl $(THREAD_SIZE-1),%eax
+ cmpl $(THREAD_SIZE-20),%eax
+ popl %eax
+ CFI_ADJUST_CFA_OFFSET -4
+ jae nmi_stack_correct
+ cmpl $ia32_sysenter_target,12(%esp)
+ je nmi_debug_stack_check
+nmi_stack_correct:
+ /* We have a RING0_INT_FRAME here */
+ pushl %eax
+ CFI_ADJUST_CFA_OFFSET 4
+ SAVE_ALL
+ TRACE_IRQS_OFF
+ xorl %edx,%edx # zero error code
+ movl %esp,%eax # pt_regs pointer
+ call do_nmi
+ jmp restore_nocheck_notrace
+ CFI_ENDPROC
+
+nmi_stack_fixup:
+ RING0_INT_FRAME
+ FIX_STACK(12,nmi_stack_correct, 1)
+ jmp nmi_stack_correct
+
+nmi_debug_stack_check:
+ /* We have a RING0_INT_FRAME here */
+ cmpw $__KERNEL_CS,16(%esp)
+ jne nmi_stack_correct
+ cmpl $debug,(%esp)
+ jb nmi_stack_correct
+ cmpl $debug_esp_fix_insn,(%esp)
+ ja nmi_stack_correct
+ FIX_STACK(24,nmi_stack_correct, 1)
+ jmp nmi_stack_correct
+
+nmi_espfix_stack:
+ /* We have a RING0_INT_FRAME here.
+ *
+ * create the pointer to lss back
+ */
+ pushl %ss
+ CFI_ADJUST_CFA_OFFSET 4
+ pushl %esp
+ CFI_ADJUST_CFA_OFFSET 4
+ addw $4, (%esp)
+ /* copy the iret frame of 12 bytes */
+ .rept 3
+ pushl 16(%esp)
+ CFI_ADJUST_CFA_OFFSET 4
+ .endr
+ pushl %eax
+ CFI_ADJUST_CFA_OFFSET 4
+ SAVE_ALL
+ TRACE_IRQS_OFF
+ FIXUP_ESPFIX_STACK # %eax == %esp
+ xorl %edx,%edx # zero error code
+ call do_nmi
+ RESTORE_REGS
+ lss 12+4(%esp), %esp # back to espfix stack
+ CFI_ADJUST_CFA_OFFSET -24
+ jmp irq_return
+ CFI_ENDPROC
+END(nmi)
+
+ENTRY(int3)
+ RING0_INT_FRAME
+ pushl $-1 # mark this as an int
+ CFI_ADJUST_CFA_OFFSET 4
+ SAVE_ALL
+ TRACE_IRQS_OFF
+ xorl %edx,%edx # zero error code
+ movl %esp,%eax # pt_regs pointer
+ call do_int3
+ jmp ret_from_exception
+ CFI_ENDPROC
+END(int3)
+
+ENTRY(general_protection)
+ RING0_EC_FRAME
+ pushl $do_general_protection
+ CFI_ADJUST_CFA_OFFSET 4
+ jmp error_code
+ CFI_ENDPROC
+END(general_protection)
+
+/*
+ * End of kprobes section
+ */
+ .popsection
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index 42571ba..3194636 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -60,7 +60,6 @@
#define __AUDIT_ARCH_LE 0x40000000
.code64
-
#ifdef CONFIG_FUNCTION_TRACER
#ifdef CONFIG_DYNAMIC_FTRACE
ENTRY(mcount)
@@ -169,21 +168,21 @@ ENTRY(native_usergs_sysret64)
*/
/* %rsp:at FRAMEEND */
- .macro FIXUP_TOP_OF_STACK tmp
- movq %gs:pda_oldrsp,\tmp
- movq \tmp,RSP(%rsp)
- movq $__USER_DS,SS(%rsp)
- movq $__USER_CS,CS(%rsp)
- movq $-1,RCX(%rsp)
- movq R11(%rsp),\tmp /* get eflags */
- movq \tmp,EFLAGS(%rsp)
+ .macro FIXUP_TOP_OF_STACK tmp offset=0
+ movq %gs:pda_oldrsp,\tmp
+ movq \tmp,RSP+\offset(%rsp)
+ movq $__USER_DS,SS+\offset(%rsp)
+ movq $__USER_CS,CS+\offset(%rsp)
+ movq $-1,RCX+\offset(%rsp)
+ movq R11+\offset(%rsp),\tmp /* get eflags */
+ movq \tmp,EFLAGS+\offset(%rsp)
.endm
- .macro RESTORE_TOP_OF_STACK tmp,offset=0
- movq RSP-\offset(%rsp),\tmp
- movq \tmp,%gs:pda_oldrsp
- movq EFLAGS-\offset(%rsp),\tmp
- movq \tmp,R11-\offset(%rsp)
+ .macro RESTORE_TOP_OF_STACK tmp offset=0
+ movq RSP+\offset(%rsp),\tmp
+ movq \tmp,%gs:pda_oldrsp
+ movq EFLAGS+\offset(%rsp),\tmp
+ movq \tmp,R11+\offset(%rsp)
.endm
.macro FAKE_STACK_FRAME child_rip
@@ -195,7 +194,7 @@ ENTRY(native_usergs_sysret64)
pushq %rax /* rsp */
CFI_ADJUST_CFA_OFFSET 8
CFI_REL_OFFSET rsp,0
- pushq $(1<<9) /* eflags - interrupts on */
+ pushq $X86_EFLAGS_IF /* eflags - interrupts on */
CFI_ADJUST_CFA_OFFSET 8
/*CFI_REL_OFFSET rflags,0*/
pushq $__KERNEL_CS /* cs */
@@ -213,64 +212,184 @@ ENTRY(native_usergs_sysret64)
CFI_ADJUST_CFA_OFFSET -(6*8)
.endm
- .macro CFI_DEFAULT_STACK start=1
+/*
+ * initial frame state for interrupts (and exceptions without error code)
+ */
+ .macro EMPTY_FRAME start=1 offset=0
.if \start
- CFI_STARTPROC simple
+ CFI_STARTPROC simple
CFI_SIGNAL_FRAME
- CFI_DEF_CFA rsp,SS+8
+ CFI_DEF_CFA rsp,8+\offset
.else
- CFI_DEF_CFA_OFFSET SS+8
+ CFI_DEF_CFA_OFFSET 8+\offset
.endif
- CFI_REL_OFFSET r15,R15
- CFI_REL_OFFSET r14,R14
- CFI_REL_OFFSET r13,R13
- CFI_REL_OFFSET r12,R12
- CFI_REL_OFFSET rbp,RBP
- CFI_REL_OFFSET rbx,RBX
- CFI_REL_OFFSET r11,R11
- CFI_REL_OFFSET r10,R10
- CFI_REL_OFFSET r9,R9
- CFI_REL_OFFSET r8,R8
- CFI_REL_OFFSET rax,RAX
- CFI_REL_OFFSET rcx,RCX
- CFI_REL_OFFSET rdx,RDX
- CFI_REL_OFFSET rsi,RSI
- CFI_REL_OFFSET rdi,RDI
- CFI_REL_OFFSET rip,RIP
- /*CFI_REL_OFFSET cs,CS*/
- /*CFI_REL_OFFSET rflags,EFLAGS*/
- CFI_REL_OFFSET rsp,RSP
- /*CFI_REL_OFFSET ss,SS*/
.endm
+
+/*
+ * initial frame state for interrupts (and exceptions without error code)
+ */
+ .macro INTR_FRAME start=1 offset=0
+ EMPTY_FRAME \start, SS+8+\offset-RIP
+ /*CFI_REL_OFFSET ss, SS+\offset-RIP*/
+ CFI_REL_OFFSET rsp, RSP+\offset-RIP
+ /*CFI_REL_OFFSET rflags, EFLAGS+\offset-RIP*/
+ /*CFI_REL_OFFSET cs, CS+\offset-RIP*/
+ CFI_REL_OFFSET rip, RIP+\offset-RIP
+ .endm
+
+/*
+ * initial frame state for exceptions with error code (and interrupts
+ * with vector already pushed)
+ */
+ .macro XCPT_FRAME start=1 offset=0
+ INTR_FRAME \start, RIP+\offset-ORIG_RAX
+ /*CFI_REL_OFFSET orig_rax, ORIG_RAX-ORIG_RAX*/
+ .endm
+
+/*
+ * frame that enables calling into C.
+ */
+ .macro PARTIAL_FRAME start=1 offset=0
+ XCPT_FRAME \start, ORIG_RAX+\offset-ARGOFFSET
+ CFI_REL_OFFSET rdi, RDI+\offset-ARGOFFSET
+ CFI_REL_OFFSET rsi, RSI+\offset-ARGOFFSET
+ CFI_REL_OFFSET rdx, RDX+\offset-ARGOFFSET
+ CFI_REL_OFFSET rcx, RCX+\offset-ARGOFFSET
+ CFI_REL_OFFSET rax, RAX+\offset-ARGOFFSET
+ CFI_REL_OFFSET r8, R8+\offset-ARGOFFSET
+ CFI_REL_OFFSET r9, R9+\offset-ARGOFFSET
+ CFI_REL_OFFSET r10, R10+\offset-ARGOFFSET
+ CFI_REL_OFFSET r11, R11+\offset-ARGOFFSET
+ .endm
+
+/*
+ * frame that enables passing a complete pt_regs to a C function.
+ */
+ .macro DEFAULT_FRAME start=1 offset=0
+ PARTIAL_FRAME \start, R11+\offset-R15
+ CFI_REL_OFFSET rbx, RBX+\offset
+ CFI_REL_OFFSET rbp, RBP+\offset
+ CFI_REL_OFFSET r12, R12+\offset
+ CFI_REL_OFFSET r13, R13+\offset
+ CFI_REL_OFFSET r14, R14+\offset
+ CFI_REL_OFFSET r15, R15+\offset
+ .endm
+
+/* save partial stack frame */
+ENTRY(save_args)
+ XCPT_FRAME
+ cld
+ movq_cfi rdi, RDI+16-ARGOFFSET
+ movq_cfi rsi, RSI+16-ARGOFFSET
+ movq_cfi rdx, RDX+16-ARGOFFSET
+ movq_cfi rcx, RCX+16-ARGOFFSET
+ movq_cfi rax, RAX+16-ARGOFFSET
+ movq_cfi r8, R8+16-ARGOFFSET
+ movq_cfi r9, R9+16-ARGOFFSET
+ movq_cfi r10, R10+16-ARGOFFSET
+ movq_cfi r11, R11+16-ARGOFFSET
+
+ leaq -ARGOFFSET+16(%rsp),%rdi /* arg1 for handler */
+ movq_cfi rbp, 8 /* push %rbp */
+ leaq 8(%rsp), %rbp /* mov %rsp, %ebp */
+ testl $3, CS(%rdi)
+ je 1f
+ SWAPGS
+ /*
+ * irqcount is used to check if a CPU is already on an interrupt stack
+ * or not. While this is essentially redundant with preempt_count it is
+ * a little cheaper to use a separate counter in the PDA (short of
+ * moving irq_enter into assembly, which would be too much work)
+ */
+1: incl %gs:pda_irqcount
+ jne 2f
+ popq_cfi %rax /* move return address... */
+ mov %gs:pda_irqstackptr,%rsp
+ EMPTY_FRAME 0
+ pushq_cfi %rax /* ... to the new stack */
+ /*
+ * We entered an interrupt context - irqs are off:
+ */
+2: TRACE_IRQS_OFF
+ ret
+ CFI_ENDPROC
+END(save_args)
+
+ENTRY(save_rest)
+ PARTIAL_FRAME 1 REST_SKIP+8
+ movq 5*8+16(%rsp), %r11 /* save return address */
+ movq_cfi rbx, RBX+16
+ movq_cfi rbp, RBP+16
+ movq_cfi r12, R12+16
+ movq_cfi r13, R13+16
+ movq_cfi r14, R14+16
+ movq_cfi r15, R15+16
+ movq %r11, 8(%rsp) /* return address */
+ FIXUP_TOP_OF_STACK %r11, 16
+ ret
+ CFI_ENDPROC
+END(save_rest)
+
+/* save complete stack frame */
+ENTRY(save_paranoid)
+ XCPT_FRAME 1 RDI+8
+ cld
+ movq_cfi rdi, RDI+8
+ movq_cfi rsi, RSI+8
+ movq_cfi rdx, RDX+8
+ movq_cfi rcx, RCX+8
+ movq_cfi rax, RAX+8
+ movq_cfi r8, R8+8
+ movq_cfi r9, R9+8
+ movq_cfi r10, R10+8
+ movq_cfi r11, R11+8
+ movq_cfi rbx, RBX+8
+ movq_cfi rbp, RBP+8
+ movq_cfi r12, R12+8
+ movq_cfi r13, R13+8
+ movq_cfi r14, R14+8
+ movq_cfi r15, R15+8
+ movl $1,%ebx
+ movl $MSR_GS_BASE,%ecx
+ rdmsr
+ testl %edx,%edx
+ js 1f /* negative -> in kernel */
+ SWAPGS
+ xorl %ebx,%ebx
+1: ret
+ CFI_ENDPROC
+END(save_paranoid)
+
/*
- * A newly forked process directly context switches into this.
+ * A newly forked process directly context switches into this address.
+ *
+ * rdi: prev task we switched from
*/
-/* rdi: prev */
ENTRY(ret_from_fork)
- CFI_DEFAULT_STACK
+ DEFAULT_FRAME
+
push kernel_eflags(%rip)
CFI_ADJUST_CFA_OFFSET 8
- popf # reset kernel eflags
+ popf # reset kernel eflags
CFI_ADJUST_CFA_OFFSET -8
- call schedule_tail
+
+ call schedule_tail # rdi: 'prev' task parameter
+
GET_THREAD_INFO(%rcx)
- testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT),TI_flags(%rcx)
+
CFI_REMEMBER_STATE
- jnz rff_trace
-rff_action:
RESTORE_REST
- testl $3,CS-ARGOFFSET(%rsp) # from kernel_thread?
+
+ testl $3, CS-ARGOFFSET(%rsp) # from kernel_thread?
je int_ret_from_sys_call
- testl $_TIF_IA32,TI_flags(%rcx)
+
+ testl $_TIF_IA32, TI_flags(%rcx) # 32-bit compat task needs IRET
jnz int_ret_from_sys_call
- RESTORE_TOP_OF_STACK %rdi,ARGOFFSET
- jmp ret_from_sys_call
+
+ RESTORE_TOP_OF_STACK %rdi, -ARGOFFSET
+ jmp ret_from_sys_call # go to the SYSRET fastpath
+
CFI_RESTORE_STATE
-rff_trace:
- movq %rsp,%rdi
- call syscall_trace_leave
- GET_THREAD_INFO(%rcx)
- jmp rff_action
CFI_ENDPROC
END(ret_from_fork)
@@ -390,10 +509,13 @@ sysret_signal:
jc sysret_audit
#endif
/* edx: work flags (arg3) */
- leaq do_notify_resume(%rip),%rax
leaq -ARGOFFSET(%rsp),%rdi # &pt_regs -> arg1
xorl %esi,%esi # oldset -> arg2
- call ptregscall_common
+ SAVE_REST
+ FIXUP_TOP_OF_STACK %r11
+ call do_notify_resume
+ RESTORE_TOP_OF_STACK %r11
+ RESTORE_REST
movl $_TIF_WORK_MASK,%edi
/* Use IRET because user could have changed frame. This
works because ptregscall_common has called FIXUP_TOP_OF_STACK. */
@@ -537,18 +659,20 @@ END(system_call)
/*
* Certain special system calls that need to save a complete full stack frame.
*/
-
.macro PTREGSCALL label,func,arg
- .globl \label
-\label:
- leaq \func(%rip),%rax
- leaq -ARGOFFSET+8(%rsp),\arg /* 8 for return address */
- jmp ptregscall_common
+ENTRY(\label)
+ PARTIAL_FRAME 1 8 /* offset 8: return address */
+ subq $REST_SKIP, %rsp
+ CFI_ADJUST_CFA_OFFSET REST_SKIP
+ call save_rest
+ DEFAULT_FRAME 0 8 /* offset 8: return address */
+ leaq 8(%rsp), \arg /* pt_regs pointer */
+ call \func
+ jmp ptregscall_common
+ CFI_ENDPROC
END(\label)
.endm
- CFI_STARTPROC
-
PTREGSCALL stub_clone, sys_clone, %r8
PTREGSCALL stub_fork, sys_fork, %rdi
PTREGSCALL stub_vfork, sys_vfork, %rdi
@@ -556,22 +680,15 @@ END(\label)
PTREGSCALL stub_iopl, sys_iopl, %rsi
ENTRY(ptregscall_common)
- popq %r11
- CFI_ADJUST_CFA_OFFSET -8
- CFI_REGISTER rip, r11
- SAVE_REST
- movq %r11, %r15
- CFI_REGISTER rip, r15
- FIXUP_TOP_OF_STACK %r11
- call *%rax
- RESTORE_TOP_OF_STACK %r11
- movq %r15, %r11
- CFI_REGISTER rip, r11
- RESTORE_REST
- pushq %r11
- CFI_ADJUST_CFA_OFFSET 8
- CFI_REL_OFFSET rip, 0
- ret
+ DEFAULT_FRAME 1 8 /* offset 8: return address */
+ RESTORE_TOP_OF_STACK %r11, 8
+ movq_cfi_restore R15+8, r15
+ movq_cfi_restore R14+8, r14
+ movq_cfi_restore R13+8, r13
+ movq_cfi_restore R12+8, r12
+ movq_cfi_restore RBP+8, rbp
+ movq_cfi_restore RBX+8, rbx
+ ret $REST_SKIP /* pop extended registers */
CFI_ENDPROC
END(ptregscall_common)
@@ -610,70 +727,70 @@ ENTRY(stub_rt_sigreturn)
END(stub_rt_sigreturn)
/*
- * initial frame state for interrupts and exceptions
+ * Build the entry stubs and pointer table with some assembler magic.
+ * We pack 7 stubs into a single 32-byte chunk, which will fit in a
+ * single cache line on all modern x86 implementations.
*/
- .macro _frame ref
- CFI_STARTPROC simple
- CFI_SIGNAL_FRAME
- CFI_DEF_CFA rsp,SS+8-\ref
- /*CFI_REL_OFFSET ss,SS-\ref*/
- CFI_REL_OFFSET rsp,RSP-\ref
- /*CFI_REL_OFFSET rflags,EFLAGS-\ref*/
- /*CFI_REL_OFFSET cs,CS-\ref*/
- CFI_REL_OFFSET rip,RIP-\ref
- .endm
+ .section .init.rodata,"a"
+ENTRY(interrupt)
+ .text
+ .p2align 5
+ .p2align CONFIG_X86_L1_CACHE_SHIFT
+ENTRY(irq_entries_start)
+ INTR_FRAME
+vector=FIRST_EXTERNAL_VECTOR
+.rept (NR_VECTORS-FIRST_EXTERNAL_VECTOR+6)/7
+ .balign 32
+ .rept 7
+ .if vector < NR_VECTORS
+ .if vector <> FIRST_EXTERNAL_VECTOR
+ CFI_ADJUST_CFA_OFFSET -8
+ .endif
+1: pushq $(~vector+0x80) /* Note: always in signed byte range */
+ CFI_ADJUST_CFA_OFFSET 8
+ .if ((vector-FIRST_EXTERNAL_VECTOR)%7) <> 6
+ jmp 2f
+ .endif
+ .previous
+ .quad 1b
+ .text
+vector=vector+1
+ .endif
+ .endr
+2: jmp common_interrupt
+.endr
+ CFI_ENDPROC
+END(irq_entries_start)
-/* initial frame state for interrupts (and exceptions without error code) */
-#define INTR_FRAME _frame RIP
-/* initial frame state for exceptions with error code (and interrupts with
- vector already pushed) */
-#define XCPT_FRAME _frame ORIG_RAX
+.previous
+END(interrupt)
+.previous
-/*
+/*
* Interrupt entry/exit.
*
* Interrupt entry points save only callee clobbered registers in fast path.
- *
- * Entry runs with interrupts off.
- */
+ *
+ * Entry runs with interrupts off.
+ */
-/* 0(%rsp): interrupt number */
+/* 0(%rsp): ~(interrupt number) */
.macro interrupt func
- cld
- SAVE_ARGS
- leaq -ARGOFFSET(%rsp),%rdi # arg1 for handler
- pushq %rbp
- /*
- * Save rbp twice: One is for marking the stack frame, as usual, and the
- * other, to fill pt_regs properly. This is because bx comes right
- * before the last saved register in that structure, and not bp. If the
- * base pointer were in the place bx is today, this would not be needed.
- */
- movq %rbp, -8(%rsp)
- CFI_ADJUST_CFA_OFFSET 8
- CFI_REL_OFFSET rbp, 0
- movq %rsp,%rbp
- CFI_DEF_CFA_REGISTER rbp
- testl $3,CS(%rdi)
- je 1f
- SWAPGS
- /* irqcount is used to check if a CPU is already on an interrupt
- stack or not. While this is essentially redundant with preempt_count
- it is a little cheaper to use a separate counter in the PDA
- (short of moving irq_enter into assembly, which would be too
- much work) */
-1: incl %gs:pda_irqcount
- cmoveq %gs:pda_irqstackptr,%rsp
- push %rbp # backlink for old unwinder
- /*
- * We entered an interrupt context - irqs are off:
- */
- TRACE_IRQS_OFF
+ subq $10*8, %rsp
+ CFI_ADJUST_CFA_OFFSET 10*8
+ call save_args
+ PARTIAL_FRAME 0
call \func
.endm
-ENTRY(common_interrupt)
+ /*
+ * The interrupt stubs push (~vector+0x80) onto the stack and
+ * then jump to common_interrupt.
+ */
+ .p2align CONFIG_X86_L1_CACHE_SHIFT
+common_interrupt:
XCPT_FRAME
+ addq $-0x80,(%rsp) /* Adjust vector to [-256,-1] range */
interrupt do_IRQ
/* 0(%rsp): oldrsp-ARGOFFSET */
ret_from_intr:
@@ -808,315 +925,202 @@ END(common_interrupt)
/*
* APIC interrupts.
*/
- .macro apicinterrupt num,func
+.macro apicinterrupt num sym do_sym
+ENTRY(\sym)
INTR_FRAME
pushq $~(\num)
CFI_ADJUST_CFA_OFFSET 8
- interrupt \func
+ interrupt \do_sym
jmp ret_from_intr
CFI_ENDPROC
- .endm
+END(\sym)
+.endm
-ENTRY(thermal_interrupt)
- apicinterrupt THERMAL_APIC_VECTOR,smp_thermal_interrupt
-END(thermal_interrupt)
+#ifdef CONFIG_SMP
+apicinterrupt IRQ_MOVE_CLEANUP_VECTOR \
+ irq_move_cleanup_interrupt smp_irq_move_cleanup_interrupt
+#endif
-ENTRY(threshold_interrupt)
- apicinterrupt THRESHOLD_APIC_VECTOR,mce_threshold_interrupt
-END(threshold_interrupt)
+apicinterrupt UV_BAU_MESSAGE \
+ uv_bau_message_intr1 uv_bau_message_interrupt
+apicinterrupt LOCAL_TIMER_VECTOR \
+ apic_timer_interrupt smp_apic_timer_interrupt
#ifdef CONFIG_SMP
-ENTRY(reschedule_interrupt)
- apicinterrupt RESCHEDULE_VECTOR,smp_reschedule_interrupt
-END(reschedule_interrupt)
-
- .macro INVALIDATE_ENTRY num
-ENTRY(invalidate_interrupt\num)
- apicinterrupt INVALIDATE_TLB_VECTOR_START+\num,smp_invalidate_interrupt
-END(invalidate_interrupt\num)
- .endm
-
- INVALIDATE_ENTRY 0
- INVALIDATE_ENTRY 1
- INVALIDATE_ENTRY 2
- INVALIDATE_ENTRY 3
- INVALIDATE_ENTRY 4
- INVALIDATE_ENTRY 5
- INVALIDATE_ENTRY 6
- INVALIDATE_ENTRY 7
-
-ENTRY(call_function_interrupt)
- apicinterrupt CALL_FUNCTION_VECTOR,smp_call_function_interrupt
-END(call_function_interrupt)
-ENTRY(call_function_single_interrupt)
- apicinterrupt CALL_FUNCTION_SINGLE_VECTOR,smp_call_function_single_interrupt
-END(call_function_single_interrupt)
-ENTRY(irq_move_cleanup_interrupt)
- apicinterrupt IRQ_MOVE_CLEANUP_VECTOR,smp_irq_move_cleanup_interrupt
-END(irq_move_cleanup_interrupt)
+apicinterrupt INVALIDATE_TLB_VECTOR_START+0 \
+ invalidate_interrupt0 smp_invalidate_interrupt
+apicinterrupt INVALIDATE_TLB_VECTOR_START+1 \
+ invalidate_interrupt1 smp_invalidate_interrupt
+apicinterrupt INVALIDATE_TLB_VECTOR_START+2 \
+ invalidate_interrupt2 smp_invalidate_interrupt
+apicinterrupt INVALIDATE_TLB_VECTOR_START+3 \
+ invalidate_interrupt3 smp_invalidate_interrupt
+apicinterrupt INVALIDATE_TLB_VECTOR_START+4 \
+ invalidate_interrupt4 smp_invalidate_interrupt
+apicinterrupt INVALIDATE_TLB_VECTOR_START+5 \
+ invalidate_interrupt5 smp_invalidate_interrupt
+apicinterrupt INVALIDATE_TLB_VECTOR_START+6 \
+ invalidate_interrupt6 smp_invalidate_interrupt
+apicinterrupt INVALIDATE_TLB_VECTOR_START+7 \
+ invalidate_interrupt7 smp_invalidate_interrupt
#endif
-ENTRY(apic_timer_interrupt)
- apicinterrupt LOCAL_TIMER_VECTOR,smp_apic_timer_interrupt
-END(apic_timer_interrupt)
+apicinterrupt THRESHOLD_APIC_VECTOR \
+ threshold_interrupt mce_threshold_interrupt
+apicinterrupt THERMAL_APIC_VECTOR \
+ thermal_interrupt smp_thermal_interrupt
-ENTRY(uv_bau_message_intr1)
- apicinterrupt 220,uv_bau_message_interrupt
-END(uv_bau_message_intr1)
-
-ENTRY(error_interrupt)
- apicinterrupt ERROR_APIC_VECTOR,smp_error_interrupt
-END(error_interrupt)
+#ifdef CONFIG_SMP
+apicinterrupt CALL_FUNCTION_SINGLE_VECTOR \
+ call_function_single_interrupt smp_call_function_single_interrupt
+apicinterrupt CALL_FUNCTION_VECTOR \
+ call_function_interrupt smp_call_function_interrupt
+apicinterrupt RESCHEDULE_VECTOR \
+ reschedule_interrupt smp_reschedule_interrupt
+#endif
-ENTRY(spurious_interrupt)
- apicinterrupt SPURIOUS_APIC_VECTOR,smp_spurious_interrupt
-END(spurious_interrupt)
+apicinterrupt ERROR_APIC_VECTOR \
+ error_interrupt smp_error_interrupt
+apicinterrupt SPURIOUS_APIC_VECTOR \
+ spurious_interrupt smp_spurious_interrupt
/*
* Exception entry points.
*/
- .macro zeroentry sym
+.macro zeroentry sym do_sym
+ENTRY(\sym)
INTR_FRAME
PARAVIRT_ADJUST_EXCEPTION_FRAME
- pushq $0 /* push error code/oldrax */
- CFI_ADJUST_CFA_OFFSET 8
- pushq %rax /* push real oldrax to the rdi slot */
- CFI_ADJUST_CFA_OFFSET 8
- CFI_REL_OFFSET rax,0
- leaq \sym(%rip),%rax
- jmp error_entry
+ pushq_cfi $-1 /* ORIG_RAX: no syscall to restart */
+ subq $15*8,%rsp
+ CFI_ADJUST_CFA_OFFSET 15*8
+ call error_entry
+ DEFAULT_FRAME 0
+ movq %rsp,%rdi /* pt_regs pointer */
+ xorl %esi,%esi /* no error code */
+ call \do_sym
+ jmp error_exit /* %ebx: no swapgs flag */
CFI_ENDPROC
- .endm
+END(\sym)
+.endm
- .macro errorentry sym
- XCPT_FRAME
+.macro paranoidzeroentry sym do_sym
+ENTRY(\sym)
+ INTR_FRAME
PARAVIRT_ADJUST_EXCEPTION_FRAME
- pushq %rax
+ pushq $-1 /* ORIG_RAX: no syscall to restart */
CFI_ADJUST_CFA_OFFSET 8
- CFI_REL_OFFSET rax,0
- leaq \sym(%rip),%rax
- jmp error_entry
+ subq $15*8, %rsp
+ call save_paranoid
+ TRACE_IRQS_OFF
+ movq %rsp,%rdi /* pt_regs pointer */
+ xorl %esi,%esi /* no error code */
+ call \do_sym
+ jmp paranoid_exit /* %ebx: no swapgs flag */
CFI_ENDPROC
- .endm
+END(\sym)
+.endm
- /* error code is on the stack already */
- /* handle NMI like exceptions that can happen everywhere */
- .macro paranoidentry sym, ist=0, irqtrace=1
- SAVE_ALL
- cld
- movl $1,%ebx
- movl $MSR_GS_BASE,%ecx
- rdmsr
- testl %edx,%edx
- js 1f
- SWAPGS
- xorl %ebx,%ebx
-1:
- .if \ist
- movq %gs:pda_data_offset, %rbp
- .endif
- .if \irqtrace
- TRACE_IRQS_OFF
- .endif
- movq %rsp,%rdi
- movq ORIG_RAX(%rsp),%rsi
- movq $-1,ORIG_RAX(%rsp)
- .if \ist
- subq $EXCEPTION_STKSZ, per_cpu__init_tss + TSS_ist + (\ist - 1) * 8(%rbp)
- .endif
- call \sym
- .if \ist
- addq $EXCEPTION_STKSZ, per_cpu__init_tss + TSS_ist + (\ist - 1) * 8(%rbp)
- .endif
- DISABLE_INTERRUPTS(CLBR_NONE)
- .if \irqtrace
+.macro paranoidzeroentry_ist sym do_sym ist
+ENTRY(\sym)
+ INTR_FRAME
+ PARAVIRT_ADJUST_EXCEPTION_FRAME
+ pushq $-1 /* ORIG_RAX: no syscall to restart */
+ CFI_ADJUST_CFA_OFFSET 8
+ subq $15*8, %rsp
+ call save_paranoid
TRACE_IRQS_OFF
- .endif
- .endm
+ movq %rsp,%rdi /* pt_regs pointer */
+ xorl %esi,%esi /* no error code */
+ movq %gs:pda_data_offset, %rbp
+ subq $EXCEPTION_STKSZ, per_cpu__init_tss + TSS_ist + (\ist - 1) * 8(%rbp)
+ call \do_sym
+ addq $EXCEPTION_STKSZ, per_cpu__init_tss + TSS_ist + (\ist - 1) * 8(%rbp)
+ jmp paranoid_exit /* %ebx: no swapgs flag */
+ CFI_ENDPROC
+END(\sym)
+.endm
- /*
- * "Paranoid" exit path from exception stack.
- * Paranoid because this is used by NMIs and cannot take
- * any kernel state for granted.
- * We don't do kernel preemption checks here, because only
- * NMI should be common and it does not enable IRQs and
- * cannot get reschedule ticks.
- *
- * "trace" is 0 for the NMI handler only, because irq-tracing
- * is fundamentally NMI-unsafe. (we cannot change the soft and
- * hard flags at once, atomically)
- */
- .macro paranoidexit trace=1
- /* ebx: no swapgs flag */
-paranoid_exit\trace:
- testl %ebx,%ebx /* swapgs needed? */
- jnz paranoid_restore\trace
- testl $3,CS(%rsp)
- jnz paranoid_userspace\trace
-paranoid_swapgs\trace:
- .if \trace
- TRACE_IRQS_IRETQ 0
- .endif
- SWAPGS_UNSAFE_STACK
-paranoid_restore\trace:
- RESTORE_ALL 8
- jmp irq_return
-paranoid_userspace\trace:
- GET_THREAD_INFO(%rcx)
- movl TI_flags(%rcx),%ebx
- andl $_TIF_WORK_MASK,%ebx
- jz paranoid_swapgs\trace
- movq %rsp,%rdi /* &pt_regs */
- call sync_regs
- movq %rax,%rsp /* switch stack for scheduling */
- testl $_TIF_NEED_RESCHED,%ebx
- jnz paranoid_schedule\trace
- movl %ebx,%edx /* arg3: thread flags */
- .if \trace
- TRACE_IRQS_ON
- .endif
- ENABLE_INTERRUPTS(CLBR_NONE)
- xorl %esi,%esi /* arg2: oldset */
- movq %rsp,%rdi /* arg1: &pt_regs */
- call do_notify_resume
- DISABLE_INTERRUPTS(CLBR_NONE)
- .if \trace
- TRACE_IRQS_OFF
- .endif
- jmp paranoid_userspace\trace
-paranoid_schedule\trace:
- .if \trace
- TRACE_IRQS_ON
- .endif
- ENABLE_INTERRUPTS(CLBR_ANY)
- call schedule
- DISABLE_INTERRUPTS(CLBR_ANY)
- .if \trace
- TRACE_IRQS_OFF
- .endif
- jmp paranoid_userspace\trace
+.macro errorentry sym do_sym
+ENTRY(\sym)
+ XCPT_FRAME
+ PARAVIRT_ADJUST_EXCEPTION_FRAME
+ subq $15*8,%rsp
+ CFI_ADJUST_CFA_OFFSET 15*8
+ call error_entry
+ DEFAULT_FRAME 0
+ movq %rsp,%rdi /* pt_regs pointer */
+ movq ORIG_RAX(%rsp),%rsi /* get error code */
+ movq $-1,ORIG_RAX(%rsp) /* no syscall to restart */
+ call \do_sym
+ jmp error_exit /* %ebx: no swapgs flag */
CFI_ENDPROC
- .endm
+END(\sym)
+.endm
-/*
- * Exception entry point. This expects an error code/orig_rax on the stack
- * and the exception handler in %rax.
- */
-KPROBE_ENTRY(error_entry)
- _frame RDI
- CFI_REL_OFFSET rax,0
- /* rdi slot contains rax, oldrax contains error code */
- cld
- subq $14*8,%rsp
- CFI_ADJUST_CFA_OFFSET (14*8)
- movq %rsi,13*8(%rsp)
- CFI_REL_OFFSET rsi,RSI
- movq 14*8(%rsp),%rsi /* load rax from rdi slot */
- CFI_REGISTER rax,rsi
- movq %rdx,12*8(%rsp)
- CFI_REL_OFFSET rdx,RDX
- movq %rcx,11*8(%rsp)
- CFI_REL_OFFSET rcx,RCX
- movq %rsi,10*8(%rsp) /* store rax */
- CFI_REL_OFFSET rax,RAX
- movq %r8, 9*8(%rsp)
- CFI_REL_OFFSET r8,R8
- movq %r9, 8*8(%rsp)
- CFI_REL_OFFSET r9,R9
- movq %r10,7*8(%rsp)
- CFI_REL_OFFSET r10,R10
- movq %r11,6*8(%rsp)
- CFI_REL_OFFSET r11,R11
- movq %rbx,5*8(%rsp)
- CFI_REL_OFFSET rbx,RBX
- movq %rbp,4*8(%rsp)
- CFI_REL_OFFSET rbp,RBP
- movq %r12,3*8(%rsp)
- CFI_REL_OFFSET r12,R12
- movq %r13,2*8(%rsp)
- CFI_REL_OFFSET r13,R13
- movq %r14,1*8(%rsp)
- CFI_REL_OFFSET r14,R14
- movq %r15,(%rsp)
- CFI_REL_OFFSET r15,R15
- xorl %ebx,%ebx
- testl $3,CS(%rsp)
- je error_kernelspace
-error_swapgs:
- SWAPGS
-error_sti:
+ /* error code is on the stack already */
+.macro paranoiderrorentry sym do_sym
+ENTRY(\sym)
+ XCPT_FRAME
+ PARAVIRT_ADJUST_EXCEPTION_FRAME
+ subq $15*8,%rsp
+ CFI_ADJUST_CFA_OFFSET 15*8
+ call save_paranoid
+ DEFAULT_FRAME 0
TRACE_IRQS_OFF
- movq %rdi,RDI(%rsp)
- CFI_REL_OFFSET rdi,RDI
- movq %rsp,%rdi
+ movq %rsp,%rdi /* pt_regs pointer */
movq ORIG_RAX(%rsp),%rsi /* get error code */
- movq $-1,ORIG_RAX(%rsp)
- call *%rax
- /* ebx: no swapgs flag (1: don't need swapgs, 0: need it) */
-error_exit:
- movl %ebx,%eax
- RESTORE_REST
- DISABLE_INTERRUPTS(CLBR_NONE)
- TRACE_IRQS_OFF
- GET_THREAD_INFO(%rcx)
- testl %eax,%eax
- jne retint_kernel
- LOCKDEP_SYS_EXIT_IRQ
- movl TI_flags(%rcx),%edx
- movl $_TIF_WORK_MASK,%edi
- andl %edi,%edx
- jnz retint_careful
- jmp retint_swapgs
+ movq $-1,ORIG_RAX(%rsp) /* no syscall to restart */
+ call \do_sym
+ jmp paranoid_exit /* %ebx: no swapgs flag */
CFI_ENDPROC
+END(\sym)
+.endm
-error_kernelspace:
- incl %ebx
- /* There are two places in the kernel that can potentially fault with
- usergs. Handle them here. The exception handlers after
- iret run with kernel gs again, so don't set the user space flag.
- B stepping K8s sometimes report an truncated RIP for IRET
- exceptions returning to compat mode. Check for these here too. */
- leaq irq_return(%rip),%rcx
- cmpq %rcx,RIP(%rsp)
- je error_swapgs
- movl %ecx,%ecx /* zero extend */
- cmpq %rcx,RIP(%rsp)
- je error_swapgs
- cmpq $gs_change,RIP(%rsp)
- je error_swapgs
- jmp error_sti
-KPROBE_END(error_entry)
-
- /* Reload gs selector with exception handling */
- /* edi: new selector */
+zeroentry divide_error do_divide_error
+zeroentry overflow do_overflow
+zeroentry bounds do_bounds
+zeroentry invalid_op do_invalid_op
+zeroentry device_not_available do_device_not_available
+paranoiderrorentry double_fault do_double_fault
+zeroentry coprocessor_segment_overrun do_coprocessor_segment_overrun
+errorentry invalid_TSS do_invalid_TSS
+errorentry segment_not_present do_segment_not_present
+zeroentry spurious_interrupt_bug do_spurious_interrupt_bug
+zeroentry coprocessor_error do_coprocessor_error
+errorentry alignment_check do_alignment_check
+zeroentry simd_coprocessor_error do_simd_coprocessor_error
+
+ /* Reload gs selector with exception handling */
+ /* edi: new selector */
ENTRY(native_load_gs_index)
CFI_STARTPROC
pushf
CFI_ADJUST_CFA_OFFSET 8
DISABLE_INTERRUPTS(CLBR_ANY | ~(CLBR_RDI))
- SWAPGS
+ SWAPGS
gs_change:
- movl %edi,%gs
+ movl %edi,%gs
2: mfence /* workaround */
SWAPGS
- popf
+ popf
CFI_ADJUST_CFA_OFFSET -8
- ret
+ ret
CFI_ENDPROC
-ENDPROC(native_load_gs_index)
+END(native_load_gs_index)
- .section __ex_table,"a"
- .align 8
- .quad gs_change,bad_gs
- .previous
- .section .fixup,"ax"
+ .section __ex_table,"a"
+ .align 8
+ .quad gs_change,bad_gs
+ .previous
+ .section .fixup,"ax"
/* running with kernelgs */
bad_gs:
SWAPGS /* switch back to user gs */
xorl %eax,%eax
- movl %eax,%gs
- jmp 2b
- .previous
+ movl %eax,%gs
+ jmp 2b
+ .previous
/*
* Create a kernel thread.
@@ -1151,15 +1155,15 @@ ENTRY(kernel_thread)
* so internally to the x86_64 port you can rely on kernel_thread()
* not to reschedule the child before returning, this avoids the need
* of hacks for example to fork off the per-CPU idle tasks.
- * [Hopefully no generic code relies on the reschedule -AK]
+ * [Hopefully no generic code relies on the reschedule -AK]
*/
RESTORE_ALL
UNFAKE_STACK_FRAME
ret
CFI_ENDPROC
-ENDPROC(kernel_thread)
+END(kernel_thread)
-child_rip:
+ENTRY(child_rip)
pushq $0 # fake return address
CFI_STARTPROC
/*
@@ -1174,7 +1178,7 @@ child_rip:
call do_exit
ud2 # padding for call trace
CFI_ENDPROC
-ENDPROC(child_rip)
+END(child_rip)
/*
* execve(). This function needs to use IRET, not SYSRET, to set up all state properly.
@@ -1205,129 +1209,7 @@ ENTRY(kernel_execve)
UNFAKE_STACK_FRAME
ret
CFI_ENDPROC
-ENDPROC(kernel_execve)
-
-KPROBE_ENTRY(page_fault)
- errorentry do_page_fault
-KPROBE_END(page_fault)
-
-ENTRY(coprocessor_error)
- zeroentry do_coprocessor_error
-END(coprocessor_error)
-
-ENTRY(simd_coprocessor_error)
- zeroentry do_simd_coprocessor_error
-END(simd_coprocessor_error)
-
-ENTRY(device_not_available)
- zeroentry do_device_not_available
-END(device_not_available)
-
- /* runs on exception stack */
-KPROBE_ENTRY(debug)
- INTR_FRAME
- PARAVIRT_ADJUST_EXCEPTION_FRAME
- pushq $0
- CFI_ADJUST_CFA_OFFSET 8
- paranoidentry do_debug, DEBUG_STACK
- paranoidexit
-KPROBE_END(debug)
-
- /* runs on exception stack */
-KPROBE_ENTRY(nmi)
- INTR_FRAME
- PARAVIRT_ADJUST_EXCEPTION_FRAME
- pushq $-1
- CFI_ADJUST_CFA_OFFSET 8
- paranoidentry do_nmi, 0, 0
-#ifdef CONFIG_TRACE_IRQFLAGS
- paranoidexit 0
-#else
- jmp paranoid_exit1
- CFI_ENDPROC
-#endif
-KPROBE_END(nmi)
-
-KPROBE_ENTRY(int3)
- INTR_FRAME
- PARAVIRT_ADJUST_EXCEPTION_FRAME
- pushq $0
- CFI_ADJUST_CFA_OFFSET 8
- paranoidentry do_int3, DEBUG_STACK
- jmp paranoid_exit1
- CFI_ENDPROC
-KPROBE_END(int3)
-
-ENTRY(overflow)
- zeroentry do_overflow
-END(overflow)
-
-ENTRY(bounds)
- zeroentry do_bounds
-END(bounds)
-
-ENTRY(invalid_op)
- zeroentry do_invalid_op
-END(invalid_op)
-
-ENTRY(coprocessor_segment_overrun)
- zeroentry do_coprocessor_segment_overrun
-END(coprocessor_segment_overrun)
-
- /* runs on exception stack */
-ENTRY(double_fault)
- XCPT_FRAME
- PARAVIRT_ADJUST_EXCEPTION_FRAME
- paranoidentry do_double_fault
- jmp paranoid_exit1
- CFI_ENDPROC
-END(double_fault)
-
-ENTRY(invalid_TSS)
- errorentry do_invalid_TSS
-END(invalid_TSS)
-
-ENTRY(segment_not_present)
- errorentry do_segment_not_present
-END(segment_not_present)
-
- /* runs on exception stack */
-ENTRY(stack_segment)
- XCPT_FRAME
- PARAVIRT_ADJUST_EXCEPTION_FRAME
- paranoidentry do_stack_segment
- jmp paranoid_exit1
- CFI_ENDPROC
-END(stack_segment)
-
-KPROBE_ENTRY(general_protection)
- errorentry do_general_protection
-KPROBE_END(general_protection)
-
-ENTRY(alignment_check)
- errorentry do_alignment_check
-END(alignment_check)
-
-ENTRY(divide_error)
- zeroentry do_divide_error
-END(divide_error)
-
-ENTRY(spurious_interrupt_bug)
- zeroentry do_spurious_interrupt_bug
-END(spurious_interrupt_bug)
-
-#ifdef CONFIG_X86_MCE
- /* runs on exception stack */
-ENTRY(machine_check)
- INTR_FRAME
- PARAVIRT_ADJUST_EXCEPTION_FRAME
- pushq $0
- CFI_ADJUST_CFA_OFFSET 8
- paranoidentry do_machine_check
- jmp paranoid_exit1
- CFI_ENDPROC
-END(machine_check)
-#endif
+END(kernel_execve)
/* Call softirq on interrupt stack. Interrupts are off. */
ENTRY(call_softirq)
@@ -1347,40 +1229,33 @@ ENTRY(call_softirq)
decl %gs:pda_irqcount
ret
CFI_ENDPROC
-ENDPROC(call_softirq)
-
-KPROBE_ENTRY(ignore_sysret)
- CFI_STARTPROC
- mov $-ENOSYS,%eax
- sysret
- CFI_ENDPROC
-ENDPROC(ignore_sysret)
+END(call_softirq)
#ifdef CONFIG_XEN
-ENTRY(xen_hypervisor_callback)
- zeroentry xen_do_hypervisor_callback
-END(xen_hypervisor_callback)
+zeroentry xen_hypervisor_callback xen_do_hypervisor_callback
/*
-# A note on the "critical region" in our callback handler.
-# We want to avoid stacking callback handlers due to events occurring
-# during handling of the last event. To do this, we keep events disabled
-# until we've done all processing. HOWEVER, we must enable events before
-# popping the stack frame (can't be done atomically) and so it would still
-# be possible to get enough handler activations to overflow the stack.
-# Although unlikely, bugs of that kind are hard to track down, so we'd
-# like to avoid the possibility.
-# So, on entry to the handler we detect whether we interrupted an
-# existing activation in its critical region -- if so, we pop the current
-# activation and restart the handler using the previous one.
-*/
+ * A note on the "critical region" in our callback handler.
+ * We want to avoid stacking callback handlers due to events occurring
+ * during handling of the last event. To do this, we keep events disabled
+ * until we've done all processing. HOWEVER, we must enable events before
+ * popping the stack frame (can't be done atomically) and so it would still
+ * be possible to get enough handler activations to overflow the stack.
+ * Although unlikely, bugs of that kind are hard to track down, so we'd
+ * like to avoid the possibility.
+ * So, on entry to the handler we detect whether we interrupted an
+ * existing activation in its critical region -- if so, we pop the current
+ * activation and restart the handler using the previous one.
+ */
ENTRY(xen_do_hypervisor_callback) # do_hypervisor_callback(struct *pt_regs)
CFI_STARTPROC
-/* Since we don't modify %rdi, evtchn_do_upall(struct *pt_regs) will
- see the correct pointer to the pt_regs */
+/*
+ * Since we don't modify %rdi, evtchn_do_upall(struct *pt_regs) will
+ * see the correct pointer to the pt_regs
+ */
movq %rdi, %rsp # we don't return, adjust the stack frame
CFI_ENDPROC
- CFI_DEFAULT_STACK
+ DEFAULT_FRAME
11: incl %gs:pda_irqcount
movq %rsp,%rbp
CFI_DEF_CFA_REGISTER rbp
@@ -1395,23 +1270,26 @@ ENTRY(xen_do_hypervisor_callback) # do_hypervisor_callback(struct *pt_regs)
END(do_hypervisor_callback)
/*
-# Hypervisor uses this for application faults while it executes.
-# We get here for two reasons:
-# 1. Fault while reloading DS, ES, FS or GS
-# 2. Fault while executing IRET
-# Category 1 we do not need to fix up as Xen has already reloaded all segment
-# registers that could be reloaded and zeroed the others.
-# Category 2 we fix up by killing the current process. We cannot use the
-# normal Linux return path in this case because if we use the IRET hypercall
-# to pop the stack frame we end up in an infinite loop of failsafe callbacks.
-# We distinguish between categories by comparing each saved segment register
-# with its current contents: any discrepancy means we in category 1.
-*/
+ * Hypervisor uses this for application faults while it executes.
+ * We get here for two reasons:
+ * 1. Fault while reloading DS, ES, FS or GS
+ * 2. Fault while executing IRET
+ * Category 1 we do not need to fix up as Xen has already reloaded all segment
+ * registers that could be reloaded and zeroed the others.
+ * Category 2 we fix up by killing the current process. We cannot use the
+ * normal Linux return path in this case because if we use the IRET hypercall
+ * to pop the stack frame we end up in an infinite loop of failsafe callbacks.
+ * We distinguish between categories by comparing each saved segment register
+ * with its current contents: any discrepancy means we in category 1.
+ */
ENTRY(xen_failsafe_callback)
- framesz = (RIP-0x30) /* workaround buggy gas */
- _frame framesz
- CFI_REL_OFFSET rcx, 0
- CFI_REL_OFFSET r11, 8
+ INTR_FRAME 1 (6*8)
+ /*CFI_REL_OFFSET gs,GS*/
+ /*CFI_REL_OFFSET fs,FS*/
+ /*CFI_REL_OFFSET es,ES*/
+ /*CFI_REL_OFFSET ds,DS*/
+ CFI_REL_OFFSET r11,8
+ CFI_REL_OFFSET rcx,0
movw %ds,%cx
cmpw %cx,0x10(%rsp)
CFI_REMEMBER_STATE
@@ -1432,12 +1310,9 @@ ENTRY(xen_failsafe_callback)
CFI_RESTORE r11
addq $0x30,%rsp
CFI_ADJUST_CFA_OFFSET -0x30
- pushq $0
- CFI_ADJUST_CFA_OFFSET 8
- pushq %r11
- CFI_ADJUST_CFA_OFFSET 8
- pushq %rcx
- CFI_ADJUST_CFA_OFFSET 8
+ pushq_cfi $0 /* RIP */
+ pushq_cfi %r11
+ pushq_cfi %rcx
jmp general_protection
CFI_RESTORE_STATE
1: /* Segment mismatch => Category 1 (Bad segment). Retry the IRET. */
@@ -1447,11 +1322,223 @@ ENTRY(xen_failsafe_callback)
CFI_RESTORE r11
addq $0x30,%rsp
CFI_ADJUST_CFA_OFFSET -0x30
- pushq $0
- CFI_ADJUST_CFA_OFFSET 8
+ pushq_cfi $0
SAVE_ALL
jmp error_exit
CFI_ENDPROC
END(xen_failsafe_callback)
#endif /* CONFIG_XEN */
+
+/*
+ * Some functions should be protected against kprobes
+ */
+ .pushsection .kprobes.text, "ax"
+
+paranoidzeroentry_ist debug do_debug DEBUG_STACK
+paranoidzeroentry_ist int3 do_int3 DEBUG_STACK
+paranoiderrorentry stack_segment do_stack_segment
+errorentry general_protection do_general_protection
+errorentry page_fault do_page_fault
+#ifdef CONFIG_X86_MCE
+paranoidzeroentry machine_check do_machine_check
+#endif
+
+ /*
+ * "Paranoid" exit path from exception stack.
+ * Paranoid because this is used by NMIs and cannot take
+ * any kernel state for granted.
+ * We don't do kernel preemption checks here, because only
+ * NMI should be common and it does not enable IRQs and
+ * cannot get reschedule ticks.
+ *
+ * "trace" is 0 for the NMI handler only, because irq-tracing
+ * is fundamentally NMI-unsafe. (we cannot change the soft and
+ * hard flags at once, atomically)
+ */
+
+ /* ebx: no swapgs flag */
+ENTRY(paranoid_exit)
+ INTR_FRAME
+ DISABLE_INTERRUPTS(CLBR_NONE)
+ TRACE_IRQS_OFF
+ testl %ebx,%ebx /* swapgs needed? */
+ jnz paranoid_restore
+ testl $3,CS(%rsp)
+ jnz paranoid_userspace
+paranoid_swapgs:
+ TRACE_IRQS_IRETQ 0
+ SWAPGS_UNSAFE_STACK
+paranoid_restore:
+ RESTORE_ALL 8
+ jmp irq_return
+paranoid_userspace:
+ GET_THREAD_INFO(%rcx)
+ movl TI_flags(%rcx),%ebx
+ andl $_TIF_WORK_MASK,%ebx
+ jz paranoid_swapgs
+ movq %rsp,%rdi /* &pt_regs */
+ call sync_regs
+ movq %rax,%rsp /* switch stack for scheduling */
+ testl $_TIF_NEED_RESCHED,%ebx
+ jnz paranoid_schedule
+ movl %ebx,%edx /* arg3: thread flags */
+ TRACE_IRQS_ON
+ ENABLE_INTERRUPTS(CLBR_NONE)
+ xorl %esi,%esi /* arg2: oldset */
+ movq %rsp,%rdi /* arg1: &pt_regs */
+ call do_notify_resume
+ DISABLE_INTERRUPTS(CLBR_NONE)
+ TRACE_IRQS_OFF
+ jmp paranoid_userspace
+paranoid_schedule:
+ TRACE_IRQS_ON
+ ENABLE_INTERRUPTS(CLBR_ANY)
+ call schedule
+ DISABLE_INTERRUPTS(CLBR_ANY)
+ TRACE_IRQS_OFF
+ jmp paranoid_userspace
+ CFI_ENDPROC
+END(paranoid_exit)
+
+/*
+ * Exception entry point. This expects an error code/orig_rax on the stack.
+ * returns in "no swapgs flag" in %ebx.
+ */
+ENTRY(error_entry)
+ XCPT_FRAME
+ CFI_ADJUST_CFA_OFFSET 15*8
+ /* oldrax contains error code */
+ cld
+ movq_cfi rdi, RDI+8
+ movq_cfi rsi, RSI+8
+ movq_cfi rdx, RDX+8
+ movq_cfi rcx, RCX+8
+ movq_cfi rax, RAX+8
+ movq_cfi r8, R8+8
+ movq_cfi r9, R9+8
+ movq_cfi r10, R10+8
+ movq_cfi r11, R11+8
+ movq_cfi rbx, RBX+8
+ movq_cfi rbp, RBP+8
+ movq_cfi r12, R12+8
+ movq_cfi r13, R13+8
+ movq_cfi r14, R14+8
+ movq_cfi r15, R15+8
+ xorl %ebx,%ebx
+ testl $3,CS+8(%rsp)
+ je error_kernelspace
+error_swapgs:
+ SWAPGS
+error_sti:
+ TRACE_IRQS_OFF
+ ret
+ CFI_ENDPROC
+
+/*
+ * There are two places in the kernel that can potentially fault with
+ * usergs. Handle them here. The exception handlers after iret run with
+ * kernel gs again, so don't set the user space flag. B stepping K8s
+ * sometimes report an truncated RIP for IRET exceptions returning to
+ * compat mode. Check for these here too.
+ */
+error_kernelspace:
+ incl %ebx
+ leaq irq_return(%rip),%rcx
+ cmpq %rcx,RIP+8(%rsp)
+ je error_swapgs
+ movl %ecx,%ecx /* zero extend */
+ cmpq %rcx,RIP+8(%rsp)
+ je error_swapgs
+ cmpq $gs_change,RIP+8(%rsp)
+ je error_swapgs
+ jmp error_sti
+END(error_entry)
+
+
+/* ebx: no swapgs flag (1: don't need swapgs, 0: need it) */
+ENTRY(error_exit)
+ DEFAULT_FRAME
+ movl %ebx,%eax
+ RESTORE_REST
+ DISABLE_INTERRUPTS(CLBR_NONE)
+ TRACE_IRQS_OFF
+ GET_THREAD_INFO(%rcx)
+ testl %eax,%eax
+ jne retint_kernel
+ LOCKDEP_SYS_EXIT_IRQ
+ movl TI_flags(%rcx),%edx
+ movl $_TIF_WORK_MASK,%edi
+ andl %edi,%edx
+ jnz retint_careful
+ jmp retint_swapgs
+ CFI_ENDPROC
+END(error_exit)
+
+
+ /* runs on exception stack */
+ENTRY(nmi)
+ INTR_FRAME
+ PARAVIRT_ADJUST_EXCEPTION_FRAME
+ pushq_cfi $-1
+ subq $15*8, %rsp
+ CFI_ADJUST_CFA_OFFSET 15*8
+ call save_paranoid
+ DEFAULT_FRAME 0
+ /* paranoidentry do_nmi, 0; without TRACE_IRQS_OFF */
+ movq %rsp,%rdi
+ movq $-1,%rsi
+ call do_nmi
+#ifdef CONFIG_TRACE_IRQFLAGS
+ /* paranoidexit; without TRACE_IRQS_OFF */
+ /* ebx: no swapgs flag */
+ DISABLE_INTERRUPTS(CLBR_NONE)
+ testl %ebx,%ebx /* swapgs needed? */
+ jnz nmi_restore
+ testl $3,CS(%rsp)
+ jnz nmi_userspace
+nmi_swapgs:
+ SWAPGS_UNSAFE_STACK
+nmi_restore:
+ RESTORE_ALL 8
+ jmp irq_return
+nmi_userspace:
+ GET_THREAD_INFO(%rcx)
+ movl TI_flags(%rcx),%ebx
+ andl $_TIF_WORK_MASK,%ebx
+ jz nmi_swapgs
+ movq %rsp,%rdi /* &pt_regs */
+ call sync_regs
+ movq %rax,%rsp /* switch stack for scheduling */
+ testl $_TIF_NEED_RESCHED,%ebx
+ jnz nmi_schedule
+ movl %ebx,%edx /* arg3: thread flags */
+ ENABLE_INTERRUPTS(CLBR_NONE)
+ xorl %esi,%esi /* arg2: oldset */
+ movq %rsp,%rdi /* arg1: &pt_regs */
+ call do_notify_resume
+ DISABLE_INTERRUPTS(CLBR_NONE)
+ jmp nmi_userspace
+nmi_schedule:
+ ENABLE_INTERRUPTS(CLBR_ANY)
+ call schedule
+ DISABLE_INTERRUPTS(CLBR_ANY)
+ jmp nmi_userspace
+ CFI_ENDPROC
+#else
+ jmp paranoid_exit
+ CFI_ENDPROC
+#endif
+END(nmi)
+
+ENTRY(ignore_sysret)
+ CFI_STARTPROC
+ mov $-ENOSYS,%eax
+ sysret
+ CFI_ENDPROC
+END(ignore_sysret)
+
+/*
+ * End of kprobes section
+ */
+ .popsection
diff --git a/arch/x86/kernel/irqinit_32.c b/arch/x86/kernel/irqinit_32.c
index 845aa98..607db63 100644
--- a/arch/x86/kernel/irqinit_32.c
+++ b/arch/x86/kernel/irqinit_32.c
@@ -129,7 +129,7 @@ void __init native_init_IRQ(void)
for (i = FIRST_EXTERNAL_VECTOR; i < NR_VECTORS; i++) {
/* SYSCALL_VECTOR was reserved in trap_init. */
if (i != SYSCALL_VECTOR)
- set_intr_gate(i, interrupt[i]);
+ set_intr_gate(i, interrupt[i-FIRST_EXTERNAL_VECTOR]);
}
diff --git a/arch/x86/kernel/irqinit_64.c b/arch/x86/kernel/irqinit_64.c
index ff02353..8670b3c 100644
--- a/arch/x86/kernel/irqinit_64.c
+++ b/arch/x86/kernel/irqinit_64.c
@@ -24,41 +24,6 @@
#include <asm/i8259.h>
/*
- * Common place to define all x86 IRQ vectors
- *
- * This builds up the IRQ handler stubs using some ugly macros in irq.h
- *
- * These macros create the low-level assembly IRQ routines that save
- * register context and call do_IRQ(). do_IRQ() then does all the
- * operations that are needed to keep the AT (or SMP IOAPIC)
- * interrupt-controller happy.
- */
-
-#define IRQ_NAME2(nr) nr##_interrupt(void)
-#define IRQ_NAME(nr) IRQ_NAME2(IRQ##nr)
-
-/*
- * SMP has a few special interrupts for IPI messages
- */
-
-#define BUILD_IRQ(nr) \
- asmlinkage void IRQ_NAME(nr); \
- asm("\n.text\n.p2align\n" \
- "IRQ" #nr "_interrupt:\n\t" \
- "push $~(" #nr ") ; " \
- "jmp common_interrupt\n" \
- ".previous");
-
-#define BI(x,y) \
- BUILD_IRQ(x##y)
-
-#define BUILD_16_IRQS(x) \
- BI(x,0) BI(x,1) BI(x,2) BI(x,3) \
- BI(x,4) BI(x,5) BI(x,6) BI(x,7) \
- BI(x,8) BI(x,9) BI(x,a) BI(x,b) \
- BI(x,c) BI(x,d) BI(x,e) BI(x,f)
-
-/*
* ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts:
* (these are usually mapped to vectors 0x30-0x3f)
*/
@@ -73,37 +38,6 @@
*
* (these are usually mapped into the 0x30-0xff vector range)
*/
- BUILD_16_IRQS(0x2) BUILD_16_IRQS(0x3)
-BUILD_16_IRQS(0x4) BUILD_16_IRQS(0x5) BUILD_16_IRQS(0x6) BUILD_16_IRQS(0x7)
-BUILD_16_IRQS(0x8) BUILD_16_IRQS(0x9) BUILD_16_IRQS(0xa) BUILD_16_IRQS(0xb)
-BUILD_16_IRQS(0xc) BUILD_16_IRQS(0xd) BUILD_16_IRQS(0xe) BUILD_16_IRQS(0xf)
-
-#undef BUILD_16_IRQS
-#undef BI
-
-
-#define IRQ(x,y) \
- IRQ##x##y##_interrupt
-
-#define IRQLIST_16(x) \
- IRQ(x,0), IRQ(x,1), IRQ(x,2), IRQ(x,3), \
- IRQ(x,4), IRQ(x,5), IRQ(x,6), IRQ(x,7), \
- IRQ(x,8), IRQ(x,9), IRQ(x,a), IRQ(x,b), \
- IRQ(x,c), IRQ(x,d), IRQ(x,e), IRQ(x,f)
-
-/* for the irq vectors */
-static void (*__initdata interrupt[NR_VECTORS - FIRST_EXTERNAL_VECTOR])(void) = {
- IRQLIST_16(0x2), IRQLIST_16(0x3),
- IRQLIST_16(0x4), IRQLIST_16(0x5), IRQLIST_16(0x6), IRQLIST_16(0x7),
- IRQLIST_16(0x8), IRQLIST_16(0x9), IRQLIST_16(0xa), IRQLIST_16(0xb),
- IRQLIST_16(0xc), IRQLIST_16(0xd), IRQLIST_16(0xe), IRQLIST_16(0xf)
-};
-
-#undef IRQ
-#undef IRQLIST_16
-
-
-
/*
* IRQ2 is cascade interrupt to second interrupt controller
diff --git a/arch/x86/kernel/smp.c b/arch/x86/kernel/smp.c
index 3f92b13..7e558db 100644
--- a/arch/x86/kernel/smp.c
+++ b/arch/x86/kernel/smp.c
@@ -165,11 +165,7 @@ static void native_smp_send_stop(void)
void smp_reschedule_interrupt(struct pt_regs *regs)
{
ack_APIC_irq();
-#ifdef CONFIG_X86_32
- __get_cpu_var(irq_stat).irq_resched_count++;
-#else
- add_pda(irq_resched_count, 1);
-#endif
+ inc_irq_stat(irq_resched_count);
}
void smp_call_function_interrupt(struct pt_regs *regs)
@@ -177,11 +173,7 @@ void smp_call_function_interrupt(struct pt_regs *regs)
ack_APIC_irq();
irq_enter();
generic_smp_call_function_interrupt();
-#ifdef CONFIG_X86_32
- __get_cpu_var(irq_stat).irq_call_count++;
-#else
- add_pda(irq_call_count, 1);
-#endif
+ inc_irq_stat(irq_call_count);
irq_exit();
}
@@ -190,11 +182,7 @@ void smp_call_function_single_interrupt(struct pt_regs *regs)
ack_APIC_irq();
irq_enter();
generic_smp_call_function_single_interrupt();
-#ifdef CONFIG_X86_32
- __get_cpu_var(irq_stat).irq_call_count++;
-#else
- add_pda(irq_call_count, 1);
-#endif
+ inc_irq_stat(irq_call_count);
irq_exit();
}
diff --git a/arch/x86/kernel/time_32.c b/arch/x86/kernel/time_32.c
index 77b400f..65309e4 100644
--- a/arch/x86/kernel/time_32.c
+++ b/arch/x86/kernel/time_32.c
@@ -75,7 +75,7 @@ EXPORT_SYMBOL(profile_pc);
irqreturn_t timer_interrupt(int irq, void *dev_id)
{
/* Keep nmi watchdog up to date */
- per_cpu(irq_stat, smp_processor_id()).irq0_irqs++;
+ inc_irq_stat(irq0_irqs);
#ifdef CONFIG_X86_IO_APIC
if (timer_ack) {
diff --git a/arch/x86/kernel/time_64.c b/arch/x86/kernel/time_64.c
index 1b7711b..891e7a7 100644
--- a/arch/x86/kernel/time_64.c
+++ b/arch/x86/kernel/time_64.c
@@ -51,7 +51,7 @@ EXPORT_SYMBOL(profile_pc);
static irqreturn_t timer_interrupt(int irq, void *dev_id)
{
- add_pda(irq0_irqs, 1);
+ inc_irq_stat(irq0_irqs);
global_clock_event->event_handler(global_clock_event);
diff --git a/arch/x86/kernel/tlb_32.c b/arch/x86/kernel/tlb_32.c
index 4290d91..8da059f 100644
--- a/arch/x86/kernel/tlb_32.c
+++ b/arch/x86/kernel/tlb_32.c
@@ -118,7 +118,7 @@ void smp_invalidate_interrupt(struct pt_regs *regs)
smp_mb__after_clear_bit();
out:
put_cpu_no_resched();
- __get_cpu_var(irq_stat).irq_tlb_count++;
+ inc_irq_stat(irq_tlb_count);
}
void native_flush_tlb_others(const cpumask_t *cpumaskp, struct mm_struct *mm,
diff --git a/arch/x86/kernel/tlb_64.c b/arch/x86/kernel/tlb_64.c
index 8f919ca..29887d7 100644
--- a/arch/x86/kernel/tlb_64.c
+++ b/arch/x86/kernel/tlb_64.c
@@ -154,7 +154,7 @@ asmlinkage void smp_invalidate_interrupt(struct pt_regs *regs)
out:
ack_APIC_irq();
cpu_clear(cpu, f->flush_cpumask);
- add_pda(irq_tlb_count, 1);
+ inc_irq_stat(irq_tlb_count);
}
void native_flush_tlb_others(const cpumask_t *cpumaskp, struct mm_struct *mm,
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index c320c29..73ece26 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -481,11 +481,7 @@ do_nmi(struct pt_regs *regs, long error_code)
{
nmi_enter();
-#ifdef CONFIG_X86_32
- { int cpu; cpu = smp_processor_id(); ++nmi_count(cpu); }
-#else
- add_pda(__nmi_count, 1);
-#endif
+ inc_irq_stat(__nmi_count);
if (!ignore_nmis)
default_do_nmi(regs);
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index a5d8e1a..50a7792 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -590,7 +590,8 @@ static void __init lguest_init_IRQ(void)
* a straightforward 1 to 1 mapping, so force that here. */
__get_cpu_var(vector_irq)[vector] = i;
if (vector != SYSCALL_VECTOR) {
- set_intr_gate(vector, interrupt[vector]);
+ set_intr_gate(vector,
+ interrupt[vector-FIRST_EXTERNAL_VECTOR]);
set_irq_chip_and_handler_name(i, &lguest_irq_controller,
handle_level_irq,
"level");
OpenPOWER on IntegriCloud