Merge branch 'omap2-upstream' into devel

176 files changed, 18960 insertions, 10686 deletions

diff --git a/arch/alpha/kernel/pci_iommu.c b/arch/alpha/kernel/pci_iommu.c
index 4e1c086..dd6e334 100644
--- a/arch/alpha/kernel/pci_iommu.c
+++ b/arch/alpha/kernel/pci_iommu.c
@@ -424,11 +424,13 @@ EXPORT_SYMBOL(pci_unmap_page);
    else DMA_ADDRP is undefined.  */
 
 void *
-pci_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_addrp)
+__pci_alloc_consistent(struct pci_dev *pdev, size_t size,
+		       dma_addr_t *dma_addrp, gfp_t gfp)
 {
 	void *cpu_addr;
 	long order = get_order(size);
-	gfp_t gfp = GFP_ATOMIC;
+
+	gfp &= ~GFP_DMA;
 
 try_again:
 	cpu_addr = (void *)__get_free_pages(gfp, order);
@@ -458,7 +460,7 @@ try_again:
 
 	return cpu_addr;
 }
-EXPORT_SYMBOL(pci_alloc_consistent);
+EXPORT_SYMBOL(__pci_alloc_consistent);
 
 /* Free and unmap a consistent DMA buffer.  CPU_ADDR and DMA_ADDR must
    be values that were returned from pci_alloc_consistent.  SIZE must
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index ac1bef1..a34cc03 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -476,6 +476,7 @@ config ARCH_DAVINCI
 config ARCH_OMAP
 	bool "TI OMAP"
 	select GENERIC_GPIO
+	select HAVE_GPIO_LIB
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	help
diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c
index 5382622..5fe9588 100644
--- a/arch/arm/common/it8152.c
+++ b/arch/arm/common/it8152.c
@@ -120,6 +120,7 @@ void it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
 			  time, when they all three were 0. */
 		       bits_pd = __raw_readl(IT8152_INTC_PDCNIRR);
 		       bits_lp = __raw_readl(IT8152_INTC_LPCNIRR);
+		       bits_ld = __raw_readl(IT8152_INTC_LDCNIRR);
 		       if (!(bits_ld | bits_lp | bits_pd))
 			       return;
 	       }
@@ -133,14 +134,14 @@ void it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
 
 	       bits_lp &= ((1 << IT8152_LP_IRQ_COUNT) - 1);
 	       while (bits_lp) {
-		       i = __ffs(bits_pd);
+		       i = __ffs(bits_lp);
 		       it8152_irq(IT8152_LP_IRQ(i));
 		       bits_lp &= ~(1 << i);
 	       }
 
 	       bits_ld &= ((1 << IT8152_LD_IRQ_COUNT) - 1);
 	       while (bits_ld) {
-		       i = __ffs(bits_pd);
+		       i = __ffs(bits_ld);
 		       it8152_irq(IT8152_LD_IRQ(i));
 		       bits_ld &= ~(1 << i);
 	       }
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index 95f1c12..30a67a5 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -336,7 +336,7 @@
 		CALL(sys_mknodat)
 /* 325 */	CALL(sys_fchownat)
 		CALL(sys_futimesat)
-		CALL(sys_fstatat64)
+		CALL(ABI(sys_fstatat64,  sys_oabi_fstatat64))
 		CALL(sys_unlinkat)
 		CALL(sys_renameat)
 /* 330 */	CALL(sys_linkat)
diff --git a/arch/arm/kernel/sys_oabi-compat.c b/arch/arm/kernel/sys_oabi-compat.c
index e8b9804..96ab5f5 100644
--- a/arch/arm/kernel/sys_oabi-compat.c
+++ b/arch/arm/kernel/sys_oabi-compat.c
@@ -25,6 +25,7 @@
  * sys_stat64:
  * sys_lstat64:
  * sys_fstat64:
+ * sys_fstatat64:
  *
  *   struct stat64 has different sizes and some members are shifted
  *   Compatibility wrappers are needed for them and provided below.
@@ -169,6 +170,29 @@ asmlinkage long sys_oabi_fstat64(unsigned long fd,
 	return error;
 }
 
+asmlinkage long sys_oabi_fstatat64(int dfd,
+				   char __user *filename,
+				   struct oldabi_stat64  __user *statbuf,
+				   int flag)
+{
+	struct kstat stat;
+	int error = -EINVAL;
+
+	if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0)
+		goto out;
+
+	if (flag & AT_SYMLINK_NOFOLLOW)
+		error = vfs_lstat_fd(dfd, filename, &stat);
+	else
+		error = vfs_stat_fd(dfd, filename, &stat);
+
+	if (!error)
+	error = cp_oldabi_stat64(&stat, statbuf);
+
+out:
+	return error;
+}
+
 struct oabi_flock64 {
 	short	l_type;
 	short	l_whence;
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index 015a66b..c06f525 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -5,7 +5,8 @@
 # Common support
 obj-y := io.o id.o clock.o irq.o mux.o serial.o devices.o
 
-obj-$(CONFIG_OMAP_MPU_TIMER)		+= time.o
+obj-$(CONFIG_OMAP_MPU_TIMER)	+= time.o
+obj-$(CONFIG_OMAP_32K_TIMER)	+= timer32k.o
 
 # Power Management
 obj-$(CONFIG_PM) += pm.o sleep.o
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 5279e35..4f9baba 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -32,6 +32,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/i2c.h>
+#include <linux/leds.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -183,11 +184,80 @@ static struct platform_device *osk5912_devices[] __initdata = {
 	&osk5912_mcbsp1_device,
 };
 
+static struct gpio_led tps_leds[] = {
+	/* NOTE:  D9 and D2 have hardware blink support.
+	 * Also, D9 requires non-battery power.
+	 */
+	{ .gpio = OSK_TPS_GPIO_LED_D9, .name = "d9", },
+	{ .gpio = OSK_TPS_GPIO_LED_D2, .name = "d2", },
+	{ .gpio = OSK_TPS_GPIO_LED_D3, .name = "d3", .active_low = 1,
+			.default_trigger = "heartbeat", },
+};
+
+static struct gpio_led_platform_data tps_leds_data = {
+	.num_leds	= 3,
+	.leds		= tps_leds,
+};
+
+static struct platform_device osk5912_tps_leds = {
+	.name			= "leds-gpio",
+	.id			= 0,
+	.dev.platform_data	= &tps_leds_data,
+};
+
+static int osk_tps_setup(struct i2c_client *client, void *context)
+{
+	/* Set GPIO 1 HIGH to disable VBUS power supply;
+	 * OHCI driver powers it up/down as needed.
+	 */
+	gpio_request(OSK_TPS_GPIO_USB_PWR_EN, "n_vbus_en");
+	gpio_direction_output(OSK_TPS_GPIO_USB_PWR_EN, 1);
+
+	/* Set GPIO 2 high so LED D3 is off by default */
+	tps65010_set_gpio_out_value(GPIO2, HIGH);
+
+	/* Set GPIO 3 low to take ethernet out of reset */
+	gpio_request(OSK_TPS_GPIO_LAN_RESET, "smc_reset");
+	gpio_direction_output(OSK_TPS_GPIO_LAN_RESET, 0);
+
+	/* GPIO4 is VDD_DSP */
+	gpio_request(OSK_TPS_GPIO_DSP_PWR_EN, "dsp_power");
+	gpio_direction_output(OSK_TPS_GPIO_DSP_PWR_EN, 1);
+	/* REVISIT if DSP support isn't configured, power it off ... */
+
+	/* Let LED1 (D9) blink; leds-gpio may override it */
+	tps65010_set_led(LED1, BLINK);
+
+	/* Set LED2 off by default */
+	tps65010_set_led(LED2, OFF);
+
+	/* Enable LOW_PWR handshake */
+	tps65010_set_low_pwr(ON);
+
+	/* Switch VLDO2 to 3.0V for AIC23 */
+	tps65010_config_vregs1(TPS_LDO2_ENABLE | TPS_VLDO2_3_0V
+			| TPS_LDO1_ENABLE);
+
+	/* register these three LEDs */
+	osk5912_tps_leds.dev.parent = &client->dev;
+	platform_device_register(&osk5912_tps_leds);
+
+	return 0;
+}
+
+static struct tps65010_board tps_board = {
+	.base		= OSK_TPS_GPIO_BASE,
+	.outmask	= 0x0f,
+	.setup		= osk_tps_setup,
+};
+
 static struct i2c_board_info __initdata osk_i2c_board_info[] = {
 	{
 		I2C_BOARD_INFO("tps65010", 0x48),
 		.type		= "tps65010",
 		.irq		= OMAP_GPIO_IRQ(OMAP_MPUIO(1)),
+		.platform_data	= &tps_board,
+
 	},
 	/* TODO when driver support is ready:
 	 *  - aic23 audio chip at 0x1a
@@ -198,7 +268,7 @@ static struct i2c_board_info __initdata osk_i2c_board_info[] = {
 
 static void __init osk_init_smc91x(void)
 {
-	if ((omap_request_gpio(0)) < 0) {
+	if ((gpio_request(0, "smc_irq")) < 0) {
 		printk("Error requesting gpio 0 for smc91x irq\n");
 		return;
 	}
@@ -210,7 +280,7 @@ static void __init osk_init_smc91x(void)
 static void __init osk_init_cf(void)
 {
 	omap_cfg_reg(M7_1610_GPIO62);
-	if ((omap_request_gpio(62)) < 0) {
+	if ((gpio_request(62, "cf_irq")) < 0) {
 		printk("Error requesting gpio 62 for CF irq\n");
 		return;
 	}
@@ -334,7 +404,7 @@ static struct platform_device *mistral_devices[] __initdata = {
 
 static int mistral_get_pendown_state(void)
 {
-	return !omap_get_gpio_datain(4);
+	return !gpio_get_value(4);
 }
 
 static const struct ads7846_platform_data mistral_ts_info = {
@@ -396,25 +466,31 @@ static void __init osk_mistral_init(void)
 	omap_cfg_reg(W14_1610_CCP_DATAP);
 
 	/* CAM_PWDN */
-	if (omap_request_gpio(11) == 0) {
+	if (gpio_request(11, "cam_pwdn") == 0) {
 		omap_cfg_reg(N20_1610_GPIO11);
-		omap_set_gpio_direction(11, 0 /* out */);
-		omap_set_gpio_dataout(11, 0 /* off */);
+		gpio_direction_output(11, 0);
 	} else
 		pr_debug("OSK+Mistral: CAM_PWDN is awol\n");
 
 
 	/* omap_cfg_reg(P19_1610_GPIO6); */	/* BUSY */
+	gpio_request(6, "ts_busy");
+	gpio_direction_input(6);
+
 	omap_cfg_reg(P20_1610_GPIO4);	/* PENIRQ */
+	gpio_request(4, "ts_int");
+	gpio_direction_input(4);
 	set_irq_type(OMAP_GPIO_IRQ(4), IRQT_FALLING);
+
 	spi_register_board_info(mistral_boardinfo,
 			ARRAY_SIZE(mistral_boardinfo));
 
 	/* the sideways button (SW1) is for use as a "wakeup" button */
 	omap_cfg_reg(N15_1610_MPUIO2);
-	if (omap_request_gpio(OMAP_MPUIO(2)) == 0) {
+	if (gpio_request(OMAP_MPUIO(2), "wakeup") == 0) {
 		int ret = 0;
-		omap_set_gpio_direction(OMAP_MPUIO(2), 1);
+
+		gpio_direction_input(OMAP_MPUIO(2));
 		set_irq_type(OMAP_GPIO_IRQ(OMAP_MPUIO(2)), IRQT_RISING);
 #ifdef	CONFIG_PM
 		/* share the IRQ in case someone wants to use the
@@ -425,7 +501,7 @@ static void __init osk_mistral_init(void)
 				IRQF_SHARED, "mistral_wakeup",
 				&osk_mistral_wake_interrupt);
 		if (ret != 0) {
-			omap_free_gpio(OMAP_MPUIO(2));
+			gpio_free(OMAP_MPUIO(2));
 			printk(KERN_ERR "OSK+Mistral: no wakeup irq, %d?\n",
 				ret);
 		} else
@@ -438,10 +514,8 @@ static void __init osk_mistral_init(void)
 	 * board, like the touchscreen, EEPROM, and wakeup (!) switch.
 	 */
 	omap_cfg_reg(PWL);
-	if (omap_request_gpio(2) == 0) {
-		omap_set_gpio_direction(2, 0 /* out */);
-		omap_set_gpio_dataout(2, 1 /* on */);
-	}
+	if (gpio_request(2, "lcd_pwr") == 0)
+		gpio_direction_output(2, 1);
 
 	platform_add_devices(mistral_devices, ARRAY_SIZE(mistral_devices));
 }
@@ -484,44 +558,6 @@ static void __init osk_map_io(void)
 	omap1_map_common_io();
 }
 
-#ifdef CONFIG_TPS65010
-static int __init osk_tps_init(void)
-{
-	if (!machine_is_omap_osk())
-		return 0;
-
-	/* Let LED1 (D9) blink */
-	tps65010_set_led(LED1, BLINK);
-
-	/* Disable LED 2 (D2) */
-	tps65010_set_led(LED2, OFF);
-
-	/* Set GPIO 1 HIGH to disable VBUS power supply;
-	 * OHCI driver powers it up/down as needed.
-	 */
-	tps65010_set_gpio_out_value(GPIO1, HIGH);
-
-	/* Set GPIO 2 low to turn on LED D3 */
-	tps65010_set_gpio_out_value(GPIO2, HIGH);
-
-	/* Set GPIO 3 low to take ethernet out of reset */
-	tps65010_set_gpio_out_value(GPIO3, LOW);
-
-	/* gpio4 for VDD_DSP */
-	/* FIXME send power to DSP iff it's configured */
-
-	/* Enable LOW_PWR */
-	tps65010_set_low_pwr(ON);
-
-	/* Switch VLDO2 to 3.0V for AIC23 */
-	tps65010_config_vregs1(TPS_LDO2_ENABLE | TPS_VLDO2_3_0V
-			| TPS_LDO1_ENABLE);
-
-	return 0;
-}
-fs_initcall(osk_tps_init);
-#endif
-
 MACHINE_START(OMAP_OSK, "TI-OSK")
 	/* Maintainer: Dirk Behme <dirk.behme@de.bosch.com> */
 	.phys_io	= 0xfff00000,
diff --git a/arch/arm/mach-omap1/leds-osk.c b/arch/arm/mach-omap1/leds-osk.c
index 026685e..754383d 100644
--- a/arch/arm/mach-omap1/leds-osk.c
+++ b/arch/arm/mach-omap1/leds-osk.c
@@ -1,11 +1,9 @@
 /*
  * linux/arch/arm/mach-omap1/leds-osk.c
  *
- * LED driver for OSK, and optionally Mistral QVGA, boards
+ * LED driver for OSK with optional Mistral QVGA board
  */
 #include <linux/init.h>
-#include <linux/workqueue.h>
-#include <linux/i2c/tps65010.h>
 
 #include <asm/hardware.h>
 #include <asm/leds.h>
@@ -20,49 +18,11 @@
 #define LED_STATE_CLAIMED	(1 << 1)
 static u8 led_state;
 
-#define	GREEN_LED		(1 << 0)	/* TPS65010 LED1 */
-#define	AMBER_LED		(1 << 1)	/* TPS65010 LED2 */
-#define	RED_LED			(1 << 2)	/* TPS65010 GPIO2 */
 #define	TIMER_LED		(1 << 3)	/* Mistral board */
 #define	IDLE_LED		(1 << 4)	/* Mistral board */
 static u8 hw_led_state;
 
 
-/* TPS65010 leds are changed using i2c -- from a task context.
- * Using one of these for the "idle" LED would be impractical...
- */
-#define	TPS_LEDS	(GREEN_LED | RED_LED | AMBER_LED)
-
-static u8 tps_leds_change;
-
-static void tps_work(struct work_struct *unused)
-{
-	for (;;) {
-		u8	leds;
-
-		local_irq_disable();
-		leds = tps_leds_change;
-		tps_leds_change = 0;
-		local_irq_enable();
-
-		if (!leds)
-			break;
-
-		/* careful:  the set_led() value is on/off/blink */
-		if (leds & GREEN_LED)
-			tps65010_set_led(LED1, !!(hw_led_state & GREEN_LED));
-		if (leds & AMBER_LED)
-			tps65010_set_led(LED2, !!(hw_led_state & AMBER_LED));
-
-		/* the gpio led doesn't have that issue */
-		if (leds & RED_LED)
-			tps65010_set_gpio_out_value(GPIO2,
-					!(hw_led_state & RED_LED));
-	}
-}
-
-static DECLARE_WORK(work, tps_work);
-
 #ifdef	CONFIG_OMAP_OSK_MISTRAL
 
 /* For now, all system indicators require the Mistral board, since that
@@ -112,7 +72,6 @@ void osk_leds_event(led_event_t evt)
 	case led_stop:
 		led_state &= ~LED_STATE_ENABLED;
 		hw_led_state = 0;
-		/* NOTE:  work may still be pending!! */
 		break;
 
 	case led_claim:
@@ -145,48 +104,11 @@ void osk_leds_event(led_event_t evt)
 
 #endif	/* CONFIG_OMAP_OSK_MISTRAL */
 
-	/* "green" == tps LED1 (leftmost, normally power-good)
-	 * works only with DC adapter, not on battery power!
-	 */
-	case led_green_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= GREEN_LED;
-		break;
-	case led_green_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~GREEN_LED;
-		break;
-
-	/* "amber" == tps LED2 (middle) */
-	case led_amber_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= AMBER_LED;
-		break;
-	case led_amber_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~AMBER_LED;
-		break;
-
-	/* "red" == LED on tps gpio3 (rightmost) */
-	case led_red_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= RED_LED;
-		break;
-	case led_red_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~RED_LED;
-		break;
-
 	default:
 		break;
 	}
 
 	leds ^= hw_led_state;
-	leds &= TPS_LEDS;
-	if (leds && (led_state & LED_STATE_CLAIMED)) {
-		tps_leds_change |= leds;
-		schedule_work(&work);
-	}
 
 done:
 	local_irq_restore(flags);
diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c
index 52c70e5..e207bf7 100644
--- a/arch/arm/mach-omap1/mux.c
+++ b/arch/arm/mach-omap1/mux.c
@@ -3,9 +3,9 @@
  *
  * OMAP1 pin multiplexing configurations
  *
- * Copyright (C) 2003 - 2005 Nokia Corporation
+ * Copyright (C) 2003 - 2008 Nokia Corporation
  *
- * Written by Tony Lindgren <tony.lindgren@nokia.com>
+ * Written by Tony Lindgren
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -32,8 +32,10 @@
 
 #ifdef CONFIG_OMAP_MUX
 
+static struct omap_mux_cfg arch_mux_cfg;
+
 #ifdef CONFIG_ARCH_OMAP730
-struct pin_config __initdata_or_module omap730_pins[] = {
+static struct pin_config __initdata_or_module omap730_pins[] = {
 MUX_CFG_730("E2_730_KBR0",        12,   21,    0,   20,   1, 0)
 MUX_CFG_730("J7_730_KBR1",        12,   25,    0,   24,   1, 0)
 MUX_CFG_730("E1_730_KBR2",        12,   29,    0,   28,   1, 0)
@@ -49,10 +51,14 @@ MUX_CFG_730("AA17_730_USB_DM",     2,   21,    0,   20,   0, 0)
 MUX_CFG_730("W16_730_USB_PU_EN",   2,   25,    0,   24,   0, 0)
 MUX_CFG_730("W17_730_USB_VBUSI",   2,   29,    0,   28,   0, 0)
 };
-#endif
+#define OMAP730_PINS_SZ		ARRAY_SIZE(omap730_pins)
+#else
+#define omap730_pins		NULL
+#define OMAP730_PINS_SZ		0
+#endif	/* CONFIG_ARCH_OMAP730 */
 
 #if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)
-struct pin_config __initdata_or_module omap1xxx_pins[] = {
+static struct pin_config __initdata_or_module omap1xxx_pins[] = {
 /*
  *	 description		mux  mode   mux	 pull pull  pull  pu_pd	 pu  dbg
  *				reg  offset mode reg  bit   ena	  reg
@@ -306,22 +312,136 @@ MUX_CFG("Y12_1610_CCP_CLKP",	 8,   18,    6,   1,  24,   1,    1,     0,  0)
 MUX_CFG("W13_1610_CCP_CLKM",	 9,    0,    6,   1,  28,   1,    1,     0,  0)
 MUX_CFG("W14_1610_CCP_DATAP",	 9,   24,    6,   2,   4,   1,    2,     0,  0)
 MUX_CFG("Y14_1610_CCP_DATAM",	 9,   21,    6,   2,   3,   1,    2,     0,  0)
-
 };
+#define OMAP1XXX_PINS_SZ	ARRAY_SIZE(omap1xxx_pins)
+#else
+#define omap1xxx_pins		NULL
+#define OMAP1XXX_PINS_SZ	0
 #endif	/* CONFIG_ARCH_OMAP15XX || CONFIG_ARCH_OMAP16XX */
 
-int __init omap1_mux_init(void)
+int __init_or_module omap1_cfg_reg(const struct pin_config *cfg)
 {
-
-#ifdef CONFIG_ARCH_OMAP730
-	omap_mux_register(omap730_pins, ARRAY_SIZE(omap730_pins));
+	static DEFINE_SPINLOCK(mux_spin_lock);
+	unsigned long flags;
+	unsigned int reg_orig = 0, reg = 0, pu_pd_orig = 0, pu_pd = 0,
+		pull_orig = 0, pull = 0;
+	unsigned int mask, warn = 0;
+
+	/* Check the mux register in question */
+	if (cfg->mux_reg) {
+		unsigned	tmp1, tmp2;
+
+		spin_lock_irqsave(&mux_spin_lock, flags);
+		reg_orig = omap_readl(cfg->mux_reg);
+
+		/* The mux registers always seem to be 3 bits long */
+		mask = (0x7 << cfg->mask_offset);
+		tmp1 = reg_orig & mask;
+		reg = reg_orig & ~mask;
+
+		tmp2 = (cfg->mask << cfg->mask_offset);
+		reg |= tmp2;
+
+		if (tmp1 != tmp2)
+			warn = 1;
+
+		omap_writel(reg, cfg->mux_reg);
+		spin_unlock_irqrestore(&mux_spin_lock, flags);
+	}
+
+	/* Check for pull up or pull down selection on 1610 */
+	if (!cpu_is_omap15xx()) {
+		if (cfg->pu_pd_reg && cfg->pull_val) {
+			spin_lock_irqsave(&mux_spin_lock, flags);
+			pu_pd_orig = omap_readl(cfg->pu_pd_reg);
+			mask = 1 << cfg->pull_bit;
+
+			if (cfg->pu_pd_val) {
+				if (!(pu_pd_orig & mask))
+					warn = 1;
+				/* Use pull up */
+				pu_pd = pu_pd_orig | mask;
+			} else {
+				if (pu_pd_orig & mask)
+					warn = 1;
+				/* Use pull down */
+				pu_pd = pu_pd_orig & ~mask;
+			}
+			omap_writel(pu_pd, cfg->pu_pd_reg);
+			spin_unlock_irqrestore(&mux_spin_lock, flags);
+		}
+	}
+
+	/* Check for an associated pull down register */
+	if (cfg->pull_reg) {
+		spin_lock_irqsave(&mux_spin_lock, flags);
+		pull_orig = omap_readl(cfg->pull_reg);
+		mask = 1 << cfg->pull_bit;
+
+		if (cfg->pull_val) {
+			if (pull_orig & mask)
+				warn = 1;
+			/* Low bit = pull enabled */
+			pull = pull_orig & ~mask;
+		} else {
+			if (!(pull_orig & mask))
+				warn = 1;
+			/* High bit = pull disabled */
+			pull = pull_orig | mask;
+		}
+
+		omap_writel(pull, cfg->pull_reg);
+		spin_unlock_irqrestore(&mux_spin_lock, flags);
+	}
+
+	if (warn) {
+#ifdef CONFIG_OMAP_MUX_WARNINGS
+		printk(KERN_WARNING "MUX: initialized %s\n", cfg->name);
 #endif
-
-#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)
-	omap_mux_register(omap1xxx_pins, ARRAY_SIZE(omap1xxx_pins));
+	}
+
+#ifdef CONFIG_OMAP_MUX_DEBUG
+	if (cfg->debug || warn) {
+		printk("MUX: Setting register %s\n", cfg->name);
+		printk("      %s (0x%08x) = 0x%08x -> 0x%08x\n",
+		       cfg->mux_reg_name, cfg->mux_reg, reg_orig, reg);
+
+		if (!cpu_is_omap15xx()) {
+			if (cfg->pu_pd_reg && cfg->pull_val) {
+				printk("      %s (0x%08x) = 0x%08x -> 0x%08x\n",
+				       cfg->pu_pd_name, cfg->pu_pd_reg,
+				       pu_pd_orig, pu_pd);
+			}
+		}
+
+		if (cfg->pull_reg)
+			printk("      %s (0x%08x) = 0x%08x -> 0x%08x\n",
+			       cfg->pull_name, cfg->pull_reg, pull_orig, pull);
+	}
 #endif
 
+#ifdef CONFIG_OMAP_MUX_ERRORS
+	return warn ? -ETXTBSY : 0;
+#else
 	return 0;
+#endif
+}
+
+int __init omap1_mux_init(void)
+{
+	if (cpu_is_omap730()) {
+		arch_mux_cfg.pins	= omap730_pins;
+		arch_mux_cfg.size	= OMAP730_PINS_SZ;
+		arch_mux_cfg.cfg_reg	= omap1_cfg_reg;
+	}
+
+	if (cpu_is_omap15xx() || cpu_is_omap16xx()) {
+		arch_mux_cfg.pins	= omap1xxx_pins;
+		arch_mux_cfg.size	= OMAP1XXX_PINS_SZ;
+		arch_mux_cfg.cfg_reg	= omap1_cfg_reg;
+	}
+
+	return omap_mux_register(&arch_mux_cfg);
 }
 
 #endif
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index a4f8b20..5d2b270 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -56,37 +56,6 @@
 #define OMAP_MPU_TIMER_BASE		OMAP_MPU_TIMER1_BASE
 #define OMAP_MPU_TIMER_OFFSET		0x100
 
-/* cycles to nsec conversions taken from arch/i386/kernel/timers/timer_tsc.c,
- * converted to use kHz by Kevin Hilman */
-/* convert from cycles(64bits) => nanoseconds (64bits)
- *  basic equation:
- *		ns = cycles / (freq / ns_per_sec)
- *		ns = cycles * (ns_per_sec / freq)
- *		ns = cycles * (10^9 / (cpu_khz * 10^3))
- *		ns = cycles * (10^6 / cpu_khz)
- *
- *	Then we use scaling math (suggested by george at mvista.com) to get:
- *		ns = cycles * (10^6 * SC / cpu_khz / SC
- *		ns = cycles * cyc2ns_scale / SC
- *
- *	And since SC is a constant power of two, we can convert the div
- *  into a shift.
- *			-johnstul at us.ibm.com "math is hard, lets go shopping!"
- */
-static unsigned long cyc2ns_scale;
-#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
-
-static inline void set_cyc2ns_scale(unsigned long cpu_khz)
-{
-	cyc2ns_scale = (1000000 << CYC2NS_SCALE_FACTOR)/cpu_khz;
-}
-
-static inline unsigned long long cycles_2_ns(unsigned long long cyc)
-{
-	return (cyc * cyc2ns_scale) >> CYC2NS_SCALE_FACTOR;
-}
-
-
 typedef struct {
 	u32 cntl;			/* CNTL_TIMER, R/W */
 	u32 load_tim;			/* LOAD_TIM,   W */
@@ -194,8 +163,6 @@ static struct irqaction omap_mpu_timer1_irq = {
 
 static __init void omap_init_mpu_timer(unsigned long rate)
 {
-	set_cyc2ns_scale(rate / 1000);
-
 	setup_irq(INT_TIMER1, &omap_mpu_timer1_irq);
 	omap_mpu_timer_start(0, (rate / HZ) - 1, 1);
 
@@ -260,22 +227,6 @@ static void __init omap_init_clocksource(unsigned long rate)
 		printk(err, clocksource_mpu.name);
 }
 
-
-/*
- * Scheduler clock - returns current time in nanosec units.
- */
-unsigned long long sched_clock(void)
-{
-	unsigned long ticks = 0 - omap_mpu_timer_read(1);
-	unsigned long long ticks64;
-
-	ticks64 = omap_mpu_timer2_overflows;
-	ticks64 <<= 32;
-	ticks64 |= ticks;
-
-	return cycles_2_ns(ticks64);
-}
-
 /*
  * ---------------------------------------------------------------------------
  * Timer initialization
diff --git a/arch/arm/plat-omap/timer32k.c b/arch/arm/mach-omap1/timer32k.c
index ea76f19..fbbdb80 100644
--- a/arch/arm/plat-omap/timer32k.c
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/plat-omap/timer32k.c
+ * linux/arch/arm/mach-omap1/timer32k.c
  *
  * OMAP 32K Timer
  *
@@ -70,8 +70,6 @@ struct sys_timer omap_timer;
 
 #if defined(CONFIG_ARCH_OMAP16XX)
 #define TIMER_32K_SYNCHRONIZED		0xfffbc410
-#elif defined(CONFIG_ARCH_OMAP24XX)
-#define TIMER_32K_SYNCHRONIZED		(OMAP24XX_32KSYNCT_BASE + 0x10)
 #else
 #error OMAP 32KHz timer does not currently work on 15XX!
 #endif
@@ -93,8 +91,6 @@ struct sys_timer omap_timer;
 #define JIFFIES_TO_HW_TICKS(nr_jiffies, clock_rate)			\
 				(((nr_jiffies) * (clock_rate)) / HZ)
 
-#if defined(CONFIG_ARCH_OMAP1)
-
 static inline void omap_32k_timer_write(int val, int reg)
 {
 	omap_writew(val, OMAP1_32K_TIMER_BASE + reg);
@@ -120,30 +116,14 @@ static inline void omap_32k_timer_stop(void)
 
 #define omap_32k_timer_ack_irq()
 
-#elif defined(CONFIG_ARCH_OMAP2)
-
-static struct omap_dm_timer *gptimer;
-
-static inline void omap_32k_timer_start(unsigned long load_val)
-{
-	omap_dm_timer_set_load(gptimer, 1, 0xffffffff - load_val);
-	omap_dm_timer_set_int_enable(gptimer, OMAP_TIMER_INT_OVERFLOW);
-	omap_dm_timer_start(gptimer);
-}
-
-static inline void omap_32k_timer_stop(void)
+static int omap_32k_timer_set_next_event(unsigned long delta,
+					 struct clock_event_device *dev)
 {
-	omap_dm_timer_stop(gptimer);
-}
+	omap_32k_timer_start(delta);
 
-static inline void omap_32k_timer_ack_irq(void)
-{
-	u32 status = omap_dm_timer_read_status(gptimer);
-	omap_dm_timer_write_status(gptimer, status);
+	return 0;
 }
 
-#endif
-
 static void omap_32k_timer_set_mode(enum clock_event_mode mode,
 				    struct clock_event_device *evt)
 {
@@ -164,8 +144,9 @@ static void omap_32k_timer_set_mode(enum clock_event_mode mode,
 
 static struct clock_event_device clockevent_32k_timer = {
 	.name		= "32k-timer",
-	.features       = CLOCK_EVT_FEAT_PERIODIC,
+	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
 	.shift		= 32,
+	.set_next_event	= omap_32k_timer_set_next_event,
 	.set_mode	= omap_32k_timer_set_mode,
 };
 
@@ -178,32 +159,6 @@ static inline unsigned long omap_32k_sync_timer_read(void)
 	return omap_readl(TIMER_32K_SYNCHRONIZED);
 }
 
-/*
- * Rounds down to nearest usec. Note that this will overflow for larger values.
- */
-static inline unsigned long omap_32k_ticks_to_usecs(unsigned long ticks_32k)
-{
-	return (ticks_32k * 5*5*5*5*5*5) >> 9;
-}
-
-/*
- * Rounds down to nearest nsec.
- */
-static inline unsigned long long
-omap_32k_ticks_to_nsecs(unsigned long ticks_32k)
-{
-	return (unsigned long long) ticks_32k * 1000 * 5*5*5*5*5*5 >> 9;
-}
-
-/*
- * Returns current time from boot in nsecs. It's OK for this to wrap
- * around for now, as it's just a relative time stamp.
- */
-unsigned long long sched_clock(void)
-{
-	return omap_32k_ticks_to_nsecs(omap_32k_sync_timer_read());
-}
-
 static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id)
 {
 	struct clock_event_device *evt = &clockevent_32k_timer;
@@ -222,22 +177,7 @@ static struct irqaction omap_32k_timer_irq = {
 
 static __init void omap_init_32k_timer(void)
 {
-	if (cpu_class_is_omap1())
-		setup_irq(INT_OS_TIMER, &omap_32k_timer_irq);
-
-#ifdef CONFIG_ARCH_OMAP2
-	/* REVISIT: Check 24xx TIOCP_CFG settings after idle works */
-	if (cpu_is_omap24xx()) {
-		gptimer = omap_dm_timer_request_specific(1);
-		BUG_ON(gptimer == NULL);
-
-		omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_32_KHZ);
-		setup_irq(omap_dm_timer_get_irq(gptimer), &omap_32k_timer_irq);
-		omap_dm_timer_set_int_enable(gptimer,
-			OMAP_TIMER_INT_CAPTURE | OMAP_TIMER_INT_OVERFLOW |
-			OMAP_TIMER_INT_MATCH);
-	}
-#endif
+	setup_irq(INT_OS_TIMER, &omap_32k_timer_irq);
 
 	clockevent_32k_timer.mult = div_sc(OMAP_32K_TICKS_PER_SEC,
 					   NSEC_PER_SEC,
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index b05b738..2feb687 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -3,13 +3,15 @@
 #
 
 # Common support
-obj-y := irq.o id.o io.o sram-fn.o memory.o prcm.o clock.o mux.o devices.o \
-	 serial.o gpmc.o
-
-obj-$(CONFIG_OMAP_MPU_TIMER)		+= timer-gp.o
+obj-y := irq.o id.o io.o sram-fn.o memory.o control.o prcm.o clock.o mux.o \
+		devices.o serial.o gpmc.o timer-gp.o
 
 # Power Management
-obj-$(CONFIG_PM) += pm.o pm-domain.o sleep.o
+obj-$(CONFIG_PM) += pm.o sleep.o
+
+# Clock framework
+obj-$(CONFIG_ARCH_OMAP2)		+= clock24xx.o
+obj-$(CONFIG_ARCH_OMAP3)		+= clock34xx.o
 
 # Specific board support
 obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 64235de..1c12d7c 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -33,7 +33,6 @@
 #include <asm/arch/board.h>
 #include <asm/arch/common.h>
 #include <asm/arch/gpmc.h>
-#include "prcm-regs.h"
 
 #include <asm/io.h>
 
@@ -125,15 +124,18 @@ static inline void __init sdp2430_init_smc91x(void)
 	int eth_cs;
 	unsigned long cs_mem_base;
 	unsigned int rate;
-	struct clk *l3ck;
+	struct clk *gpmc_fck;
 
 	eth_cs = SDP2430_SMC91X_CS;
 
-	l3ck = clk_get(NULL, "core_l3_ck");
-	if (IS_ERR(l3ck))
-		rate = 100000000;
-	else
-		rate = clk_get_rate(l3ck);
+	gpmc_fck = clk_get(NULL, "gpmc_fck");	/* Always on ENABLE_ON_INIT */
+	if (IS_ERR(gpmc_fck)) {
+		WARN_ON(1);
+		return;
+	}
+
+	clk_enable(gpmc_fck);
+	rate = clk_get_rate(gpmc_fck);
 
 	/* Make sure CS1 timings are correct, for 2430 always muxed */
 	gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1, 0x00011200);
@@ -160,7 +162,7 @@ static inline void __init sdp2430_init_smc91x(void)
 
 	if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
 		printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
-		return;
+		goto out;
 	}
 
 	sdp2430_smc91x_resources[0].start = cs_mem_base + 0x300;
@@ -171,10 +173,13 @@ static inline void __init sdp2430_init_smc91x(void)
 		printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
 			OMAP24XX_ETHR_GPIO_IRQ);
 		gpmc_cs_free(eth_cs);
-		return;
+		goto out;
 	}
 	omap_set_gpio_direction(OMAP24XX_ETHR_GPIO_IRQ, 1);
 
+out:
+	clk_disable(gpmc_fck);
+	clk_put(gpmc_fck);
 }
 
 static void __init omap_2430sdp_init_irq(void)
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 7846551..a1e1e67 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -26,6 +26,8 @@
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/leds.h>
+#include <linux/err.h>
+#include <linux/clk.h>
 
 #include <asm/hardware.h>
 #include <asm/mach-types.h>
@@ -39,7 +41,7 @@
 #include <asm/arch/board.h>
 #include <asm/arch/common.h>
 #include <asm/arch/gpmc.h>
-#include "prcm-regs.h"
+#include <asm/arch/control.h>
 
 /* LED & Switch macros */
 #define LED0_GPIO13		13
@@ -187,17 +189,47 @@ static inline void __init apollon_init_smc91x(void)
 {
 	unsigned long base;
 
+	unsigned int rate;
+	struct clk *gpmc_fck;
+	int eth_cs;
+
+	gpmc_fck = clk_get(NULL, "gpmc_fck");	/* Always on ENABLE_ON_INIT */
+	if (IS_ERR(gpmc_fck)) {
+		WARN_ON(1);
+		return;
+	}
+
+	clk_enable(gpmc_fck);
+	rate = clk_get_rate(gpmc_fck);
+
+	eth_cs = APOLLON_ETH_CS;
+
 	/* Make sure CS1 timings are correct */
-	GPMC_CONFIG1_1 = 0x00011203;
-	GPMC_CONFIG2_1 = 0x001f1f01;
-	GPMC_CONFIG3_1 = 0x00080803;
-	GPMC_CONFIG4_1 = 0x1c091c09;
-	GPMC_CONFIG5_1 = 0x041f1f1f;
-	GPMC_CONFIG6_1 = 0x000004c4;
+	gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1, 0x00011200);
+
+	if (rate >= 160000000) {
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f01);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080803);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1c0b1c0a);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
+	} else if (rate >= 130000000) {
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
+	} else {/* rate = 100000000 */
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x031A1F1F);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000003C2);
+	}
 
 	if (gpmc_cs_request(APOLLON_ETH_CS, SZ_16M, &base) < 0) {
 		printk(KERN_ERR "Failed to request GPMC CS for smc91x\n");
-		return;
+		goto out;
 	}
 	apollon_smc91x_resources[0].start = base + 0x300;
 	apollon_smc91x_resources[0].end   = base + 0x30f;
@@ -208,9 +240,13 @@ static inline void __init apollon_init_smc91x(void)
 		printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
 			APOLLON_ETHR_GPIO_IRQ);
 		gpmc_cs_free(APOLLON_ETH_CS);
-		return;
+		goto out;
 	}
 	omap_set_gpio_direction(APOLLON_ETHR_GPIO_IRQ, 1);
+
+out:
+	clk_disable(gpmc_fck);
+	clk_put(gpmc_fck);
 }
 
 static void __init omap_apollon_init_irq(void)
@@ -330,6 +366,8 @@ static void __init apollon_usb_init(void)
 
 static void __init omap_apollon_init(void)
 {
+	u32 v;
+
 	apollon_led_init();
 	apollon_sw_init();
 	apollon_flash_init();
@@ -339,7 +377,9 @@ static void __init omap_apollon_init(void)
 	omap_cfg_reg(W19_24XX_SYS_NIRQ);
 
 	/* Use Interal loop-back in MMC/SDIO Module Input Clock selection */
-	CONTROL_DEVCONF |= (1 << 24);
+	v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
+	v |= (1 << 24);
+	omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
 
 	/*
  	 * Make sure the serial ports are muxed on at this point.
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index f125f43..d1915f9 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -19,6 +19,8 @@
 #include <linux/delay.h>
 #include <linux/workqueue.h>
 #include <linux/input.h>
+#include <linux/err.h>
+#include <linux/clk.h>
 
 #include <asm/hardware.h>
 #include <asm/mach-types.h>
@@ -26,6 +28,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
+#include <asm/arch/control.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/gpioexpander.h>
 #include <asm/arch/mux.h>
@@ -36,10 +39,13 @@
 #include <asm/arch/keypad.h>
 #include <asm/arch/menelaus.h>
 #include <asm/arch/dma.h>
-#include "prcm-regs.h"
+#include <asm/arch/gpmc.h>
 
 #include <asm/io.h>
 
+#define H4_FLASH_CS	0
+#define H4_SMC91X_CS	1
+
 static unsigned int row_gpios[6] = { 88, 89, 124, 11, 6, 96 };
 static unsigned int col_gpios[7] = { 90, 91, 100, 36, 12, 97, 98 };
 
@@ -116,8 +122,6 @@ static struct flash_platform_data h4_flash_data = {
 };
 
 static struct resource h4_flash_resource = {
-	.start		= H4_CS0_BASE,
-	.end		= H4_CS0_BASE + SZ_64M - 1,
 	.flags		= IORESOURCE_MEM,
 };
 
@@ -253,21 +257,107 @@ static struct platform_device *h4_devices[] __initdata = {
 	&h4_lcd_device,
 };
 
+/* 2420 Sysboot setup (2430 is different) */
+static u32 get_sysboot_value(void)
+{
+	return (omap_ctrl_readl(OMAP24XX_CONTROL_STATUS) &
+		(OMAP2_SYSBOOT_5_MASK | OMAP2_SYSBOOT_4_MASK |
+		 OMAP2_SYSBOOT_3_MASK | OMAP2_SYSBOOT_2_MASK |
+		 OMAP2_SYSBOOT_1_MASK | OMAP2_SYSBOOT_0_MASK));
+}
+
+/* H4-2420's always used muxed mode, H4-2422's always use non-muxed
+ *
+ * Note: OMAP-GIT doesn't correctly do is_cpu_omap2422 and is_cpu_omap2423
+ *  correctly.  The macro needs to look at production_id not just hawkeye.
+ */
+static u32 is_gpmc_muxed(void)
+{
+	u32 mux;
+	mux = get_sysboot_value();
+	if ((mux & 0xF) == 0xd)
+		return 1;	/* NAND config (could be either) */
+	if (mux & 0x2)		/* if mux'ed */
+		return 1;
+	else
+		return 0;
+}
+
 static inline void __init h4_init_debug(void)
 {
+	int eth_cs;
+	unsigned long cs_mem_base;
+	unsigned int muxed, rate;
+	struct clk *gpmc_fck;
+
+	eth_cs	= H4_SMC91X_CS;
+
+	gpmc_fck = clk_get(NULL, "gpmc_fck");	/* Always on ENABLE_ON_INIT */
+	if (IS_ERR(gpmc_fck)) {
+		WARN_ON(1);
+		return;
+	}
+
+	clk_enable(gpmc_fck);
+	rate = clk_get_rate(gpmc_fck);
+	clk_disable(gpmc_fck);
+	clk_put(gpmc_fck);
+
+	if (is_gpmc_muxed())
+		muxed = 0x200;
+	else
+		muxed = 0;
+
 	/* Make sure CS1 timings are correct */
-	GPMC_CONFIG1_1 = 0x00011200;
-	GPMC_CONFIG2_1 = 0x001f1f01;
-	GPMC_CONFIG3_1 = 0x00080803;
-	GPMC_CONFIG4_1 = 0x1c091c09;
-	GPMC_CONFIG5_1 = 0x041f1f1f;
-	GPMC_CONFIG6_1 = 0x000004c4;
-	GPMC_CONFIG7_1 = 0x00000f40 | (0x08000000 >> 24);
+	gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1,
+			  0x00011000 | muxed);
+
+	if (rate >= 160000000) {
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f01);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080803);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1c0b1c0a);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
+	} else if (rate >= 130000000) {
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
+	} else {/* rate = 100000000 */
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x031A1F1F);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000003C2);
+	}
+
+	if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
+		printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
+		goto out;
+	}
+
 	udelay(100);
 
 	omap_cfg_reg(M15_24XX_GPIO92);
 	if (debug_card_init(cs_mem_base, OMAP24XX_ETHR_GPIO_IRQ) < 0)
 		gpmc_cs_free(eth_cs);
+
+out:
+	clk_disable(gpmc_fck);
+	clk_put(gpmc_fck);
+}
+
+static void __init h4_init_flash(void)
+{
+	unsigned long base;
+
+	if (gpmc_cs_request(H4_FLASH_CS, SZ_64M, &base) < 0) {
+		printk("Can't request GPMC CS for flash\n");
+		return;
+	}
+	h4_flash_resource.start	= base;
+	h4_flash_resource.end	= base + SZ_64M - 1;
 }
 
 static void __init omap_h4_init_irq(void)
@@ -275,6 +365,7 @@ static void __init omap_h4_init_irq(void)
 	omap2_init_common_hw();
 	omap_init_irq();
 	omap_gpio_init();
+	h4_init_flash();
 }
 
 static struct omap_uart_config h4_uart_config __initdata = {
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index e6e85b7..b57ffb5 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -1,20 +1,19 @@
 /*
  *  linux/arch/arm/mach-omap2/clock.c
  *
- *  Copyright (C) 2005 Texas Instruments Inc.
- *  Richard Woodruff <r-woodruff2@ti.com>
- *  Created for OMAP2.
- *
- *  Cleaned up and modified to use omap shared clock framework by
- *  Tony Lindgren <tony@atomide.com>
+ *  Copyright (C) 2005-2008 Texas Instruments, Inc.
+ *  Copyright (C) 2004-2008 Nokia Corporation
  *
- *  Based on omap1 clock.c, Copyright (C) 2004 - 2005 Nokia corporation
- *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ *  Contacts:
+ *  Richard Woodruff <r-woodruff2@ti.com>
+ *  Paul Walmsley
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#undef DEBUG
+
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/device.h>
@@ -22,176 +21,227 @@
 #include <linux/errno.h>
 #include <linux/delay.h>
 #include <linux/clk.h>
+#include <asm/bitops.h>
 
 #include <asm/io.h>
 
 #include <asm/arch/clock.h>
 #include <asm/arch/sram.h>
+#include <asm/arch/cpu.h>
 #include <asm/div64.h>
 
-#include "prcm-regs.h"
 #include "memory.h"
+#include "sdrc.h"
 #include "clock.h"
+#include "prm.h"
+#include "prm-regbits-24xx.h"
+#include "cm.h"
+#include "cm-regbits-24xx.h"
+#include "cm-regbits-34xx.h"
 
-#undef DEBUG
-
-//#define DOWN_VARIABLE_DPLL 1			/* Experimental */
+#define MAX_CLOCK_ENABLE_WAIT		100000
 
-static struct prcm_config *curr_prcm_set;
-static u32 curr_perf_level = PRCM_FULL_SPEED;
-static struct clk *vclk;
-static struct clk *sclk;
+u8 cpu_mask;
 
 /*-------------------------------------------------------------------------
  * Omap2 specific clock functions
  *-------------------------------------------------------------------------*/
 
-/* Recalculate SYST_CLK */
-static void omap2_sys_clk_recalc(struct clk * clk)
+/**
+ * omap2_init_clksel_parent - set a clksel clk's parent field from the hardware
+ * @clk: OMAP clock struct ptr to use
+ *
+ * Given a pointer to a source-selectable struct clk, read the hardware
+ * register and determine what its parent is currently set to.  Update the
+ * clk->parent field with the appropriate clk ptr.
+ */
+void omap2_init_clksel_parent(struct clk *clk)
 {
-	u32 div = PRCM_CLKSRC_CTRL;
-	div &= (1 << 7) | (1 << 6);	/* Test if ext clk divided by 1 or 2 */
-	div >>= clk->rate_offset;
-	clk->rate = (clk->parent->rate / div);
-	propagate_rate(clk);
+	const struct clksel *clks;
+	const struct clksel_rate *clkr;
+	u32 r, found = 0;
+
+	if (!clk->clksel)
+		return;
+
+	r = __raw_readl(clk->clksel_reg) & clk->clksel_mask;
+	r >>= __ffs(clk->clksel_mask);
+
+	for (clks = clk->clksel; clks->parent && !found; clks++) {
+		for (clkr = clks->rates; clkr->div && !found; clkr++) {
+			if ((clkr->flags & cpu_mask) && (clkr->val == r)) {
+				if (clk->parent != clks->parent) {
+					pr_debug("clock: inited %s parent "
+						 "to %s (was %s)\n",
+						 clk->name, clks->parent->name,
+						 ((clk->parent) ?
+						  clk->parent->name : "NULL"));
+					clk->parent = clks->parent;
+				};
+				found = 1;
+			}
+		}
+	}
+
+	if (!found)
+		printk(KERN_ERR "clock: init parent: could not find "
+		       "regval %0x for clock %s\n", r,  clk->name);
+
+	return;
 }
 
-static u32 omap2_get_dpll_rate(struct clk * tclk)
+/* Returns the DPLL rate */
+u32 omap2_get_dpll_rate(struct clk *clk)
 {
 	long long dpll_clk;
-	int dpll_mult, dpll_div, amult;
+	u32 dpll_mult, dpll_div, dpll;
+	const struct dpll_data *dd;
+
+	dd = clk->dpll_data;
+	/* REVISIT: What do we return on error? */
+	if (!dd)
+		return 0;
+
+	dpll = __raw_readl(dd->mult_div1_reg);
+	dpll_mult = dpll & dd->mult_mask;
+	dpll_mult >>= __ffs(dd->mult_mask);
+	dpll_div = dpll & dd->div1_mask;
+	dpll_div >>= __ffs(dd->div1_mask);
 
-	dpll_mult = (CM_CLKSEL1_PLL >> 12) & 0x03ff;	/* 10 bits */
-	dpll_div = (CM_CLKSEL1_PLL >> 8) & 0x0f;	/* 4 bits */
-	dpll_clk = (long long)tclk->parent->rate * dpll_mult;
+	dpll_clk = (long long)clk->parent->rate * dpll_mult;
 	do_div(dpll_clk, dpll_div + 1);
-	amult = CM_CLKSEL2_PLL & 0x3;
-	dpll_clk *= amult;
 
 	return dpll_clk;
 }
 
-static void omap2_followparent_recalc(struct clk *clk)
-{
-	followparent_recalc(clk);
-}
-
-static void omap2_propagate_rate(struct clk * clk)
+/*
+ * Used for clocks that have the same value as the parent clock,
+ * divided by some factor
+ */
+void omap2_fixed_divisor_recalc(struct clk *clk)
 {
-	if (!(clk->flags & RATE_FIXED))
-		clk->rate = clk->parent->rate;
+	WARN_ON(!clk->fixed_div);
 
-	propagate_rate(clk);
-}
+	clk->rate = clk->parent->rate / clk->fixed_div;
 
-static void omap2_set_osc_ck(int enable)
-{
-	if (enable)
-		PRCM_CLKSRC_CTRL &= ~(0x3 << 3);
-	else
-		PRCM_CLKSRC_CTRL |= 0x3 << 3;
+	if (clk->flags & RATE_PROPAGATES)
+		propagate_rate(clk);
 }
 
-/* Enable an APLL if off */
-static void omap2_clk_fixed_enable(struct clk *clk)
+/**
+ * omap2_wait_clock_ready - wait for clock to enable
+ * @reg: physical address of clock IDLEST register
+ * @mask: value to mask against to determine if the clock is active
+ * @name: name of the clock (for printk)
+ *
+ * Returns 1 if the clock enabled in time, or 0 if it failed to enable
+ * in roughly MAX_CLOCK_ENABLE_WAIT microseconds.
+ */
+int omap2_wait_clock_ready(void __iomem *reg, u32 mask, const char *name)
 {
-	u32 cval, i=0;
+	int i = 0;
+	int ena = 0;
 
-	if (clk->enable_bit == 0xff)			/* Parent will do it */
-		return;
+	/*
+	 * 24xx uses 0 to indicate not ready, and 1 to indicate ready.
+	 * 34xx reverses this, just to keep us on our toes
+	 */
+	if (cpu_mask & (RATE_IN_242X | RATE_IN_243X)) {
+		ena = mask;
+	} else if (cpu_mask & RATE_IN_343X) {
+		ena = 0;
+	}
 
-	cval = CM_CLKEN_PLL;
+	/* Wait for lock */
+	while (((__raw_readl(reg) & mask) != ena) &&
+	       (i++ < MAX_CLOCK_ENABLE_WAIT)) {
+		udelay(1);
+	}
 
-	if ((cval & (0x3 << clk->enable_bit)) == (0x3 << clk->enable_bit))
-		return;
+	if (i < MAX_CLOCK_ENABLE_WAIT)
+		pr_debug("Clock %s stable after %d loops\n", name, i);
+	else
+		printk(KERN_ERR "Clock %s didn't enable in %d tries\n",
+		       name, MAX_CLOCK_ENABLE_WAIT);
 
-	cval &= ~(0x3 << clk->enable_bit);
-	cval |= (0x3 << clk->enable_bit);
-	CM_CLKEN_PLL = cval;
 
-	if (clk == &apll96_ck)
-		cval = (1 << 8);
-	else if (clk == &apll54_ck)
-		cval = (1 << 6);
+	return (i < MAX_CLOCK_ENABLE_WAIT) ? 1 : 0;
+};
 
-	while (!(CM_IDLEST_CKGEN & cval)) {		/* Wait for lock */
-		++i;
-		udelay(1);
-		if (i == 100000) {
-			printk(KERN_ERR "Clock %s didn't lock\n", clk->name);
-			break;
-		}
-	}
-}
 
+/*
+ * Note: We don't need special code here for INVERT_ENABLE
+ * for the time being since INVERT_ENABLE only applies to clocks enabled by
+ * CM_CLKEN_PLL
+ */
 static void omap2_clk_wait_ready(struct clk *clk)
 {
-	unsigned long reg, other_reg, st_reg;
+	void __iomem *reg, *other_reg, *st_reg;
 	u32 bit;
-	int i;
-
-	reg = (unsigned long) clk->enable_reg;
-	if (reg == (unsigned long) &CM_FCLKEN1_CORE ||
-	    reg == (unsigned long) &CM_FCLKEN2_CORE)
-		other_reg = (reg & ~0xf0) | 0x10;
-	else if (reg == (unsigned long) &CM_ICLKEN1_CORE ||
-		 reg == (unsigned long) &CM_ICLKEN2_CORE)
-		other_reg = (reg & ~0xf0) | 0x00;
+
+	/*
+	 * REVISIT: This code is pretty ugly.  It would be nice to generalize
+	 * it and pull it into struct clk itself somehow.
+	 */
+	reg = clk->enable_reg;
+	if ((((u32)reg & 0xff) >= CM_FCLKEN1) &&
+	    (((u32)reg & 0xff) <= OMAP24XX_CM_FCLKEN2))
+		other_reg = (void __iomem *)(((u32)reg & ~0xf0) | 0x10); /* CM_ICLKEN* */
+	else if ((((u32)reg & 0xff) >= CM_ICLKEN1) &&
+		 (((u32)reg & 0xff) <= OMAP24XX_CM_ICLKEN4))
+		other_reg = (void __iomem *)(((u32)reg & ~0xf0) | 0x00); /* CM_FCLKEN* */
 	else
 		return;
 
+	/* REVISIT: What are the appropriate exclusions for 34XX? */
 	/* No check for DSS or cam clocks */
-	if ((reg & 0x0f) == 0) {
-		if (clk->enable_bit <= 1 || clk->enable_bit == 31)
+	if (cpu_is_omap24xx() && ((u32)reg & 0x0f) == 0) { /* CM_{F,I}CLKEN1 */
+		if (clk->enable_bit == OMAP24XX_EN_DSS2_SHIFT ||
+		    clk->enable_bit == OMAP24XX_EN_DSS1_SHIFT ||
+		    clk->enable_bit == OMAP24XX_EN_CAM_SHIFT)
 			return;
 	}
 
+	/* REVISIT: What are the appropriate exclusions for 34XX? */
+	/* OMAP3: ignore DSS-mod clocks */
+	if (cpu_is_omap34xx() &&
+	    (((u32)reg & ~0xff) == (u32)OMAP_CM_REGADDR(OMAP3430_DSS_MOD, 0)))
+		return;
+
 	/* Check if both functional and interface clocks
 	 * are running. */
 	bit = 1 << clk->enable_bit;
 	if (!(__raw_readl(other_reg) & bit))
 		return;
-	st_reg = (other_reg & ~0xf0) | 0x20;
-	i = 0;
-	while (!(__raw_readl(st_reg) & bit)) {
-		i++;
-		if (i == 100000) {
-			printk(KERN_ERR "Timeout enabling clock %s\n", clk->name);
-			break;
-		}
-	}
-	if (i)
-		pr_debug("Clock %s stable after %d loops\n", clk->name, i);
+	st_reg = (void __iomem *)(((u32)other_reg & ~0xf0) | 0x20); /* CM_IDLEST* */
+
+	omap2_wait_clock_ready(st_reg, bit, clk->name);
 }
 
 /* Enables clock without considering parent dependencies or use count
  * REVISIT: Maybe change this to use clk->enable like on omap1?
  */
-static int _omap2_clk_enable(struct clk * clk)
+int _omap2_clk_enable(struct clk *clk)
 {
 	u32 regval32;
 
-	if (clk->flags & ALWAYS_ENABLED)
+	if (clk->flags & (ALWAYS_ENABLED | PARENT_CONTROLS_CLOCK))
 		return 0;
 
-	if (unlikely(clk == &osc_ck)) {
-		omap2_set_osc_ck(1);
-		return 0;
-	}
+	if (clk->enable)
+		return clk->enable(clk);
 
 	if (unlikely(clk->enable_reg == 0)) {
 		printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
 		       clk->name);
-		return 0;
-	}
-
-	if (clk->enable_reg == (void __iomem *)&CM_CLKEN_PLL) {
-		omap2_clk_fixed_enable(clk);
-		return 0;
+		return 0; /* REVISIT: -EINVAL */
 	}
 
 	regval32 = __raw_readl(clk->enable_reg);
-	regval32 |= (1 << clk->enable_bit);
+	if (clk->flags & INVERT_ENABLE)
+		regval32 &= ~(1 << clk->enable_bit);
+	else
+		regval32 |= (1 << clk->enable_bit);
 	__raw_writel(regval32, clk->enable_reg);
 	wmb();
 
@@ -200,44 +250,48 @@ static int _omap2_clk_enable(struct clk * clk)
 	return 0;
 }
 
-/* Stop APLL */
-static void omap2_clk_fixed_disable(struct clk *clk)
-{
-	u32 cval;
-
-	if(clk->enable_bit == 0xff)		/* let parent off do it */
-		return;
-
-	cval = CM_CLKEN_PLL;
-	cval &= ~(0x3 << clk->enable_bit);
-	CM_CLKEN_PLL = cval;
-}
-
 /* Disables clock without considering parent dependencies or use count */
-static void _omap2_clk_disable(struct clk *clk)
+void _omap2_clk_disable(struct clk *clk)
 {
 	u32 regval32;
 
-	if (unlikely(clk == &osc_ck)) {
-		omap2_set_osc_ck(0);
+	if (clk->flags & (ALWAYS_ENABLED | PARENT_CONTROLS_CLOCK))
 		return;
-	}
 
-	if (clk->enable_reg == 0)
+	if (clk->disable) {
+		clk->disable(clk);
 		return;
+	}
 
-	if (clk->enable_reg == (void __iomem *)&CM_CLKEN_PLL) {
-		omap2_clk_fixed_disable(clk);
+	if (clk->enable_reg == 0) {
+		/*
+		 * 'Independent' here refers to a clock which is not
+		 * controlled by its parent.
+		 */
+		printk(KERN_ERR "clock: clk_disable called on independent "
+		       "clock %s which has no enable_reg\n", clk->name);
 		return;
 	}
 
 	regval32 = __raw_readl(clk->enable_reg);
-	regval32 &= ~(1 << clk->enable_bit);
+	if (clk->flags & INVERT_ENABLE)
+		regval32 |= (1 << clk->enable_bit);
+	else
+		regval32 &= ~(1 << clk->enable_bit);
 	__raw_writel(regval32, clk->enable_reg);
 	wmb();
 }
 
-static int omap2_clk_enable(struct clk *clk)
+void omap2_clk_disable(struct clk *clk)
+{
+	if (clk->usecount > 0 && !(--clk->usecount)) {
+		_omap2_clk_disable(clk);
+		if (likely((u32)clk->parent))
+			omap2_clk_disable(clk->parent);
+	}
+}
+
+int omap2_clk_enable(struct clk *clk)
 {
 	int ret = 0;
 
@@ -261,519 +315,314 @@ static int omap2_clk_enable(struct clk *clk)
 	return ret;
 }
 
-static void omap2_clk_disable(struct clk *clk)
-{
-	if (clk->usecount > 0 && !(--clk->usecount)) {
-		_omap2_clk_disable(clk);
-		if (likely((u32)clk->parent))
-			omap2_clk_disable(clk->parent);
-	}
-}
-
-/*
- * Uses the current prcm set to tell if a rate is valid.
- * You can go slower, but not faster within a given rate set.
- */
-static u32 omap2_dpll_round_rate(unsigned long target_rate)
-{
-	u32 high, low;
-
-	if ((CM_CLKSEL2_PLL & 0x3) == 1) {	/* DPLL clockout */
-		high = curr_prcm_set->dpll_speed * 2;
-		low = curr_prcm_set->dpll_speed;
-	} else {				/* DPLL clockout x 2 */
-		high = curr_prcm_set->dpll_speed;
-		low = curr_prcm_set->dpll_speed / 2;
-	}
-
-#ifdef DOWN_VARIABLE_DPLL
-	if (target_rate > high)
-		return high;
-	else
-		return target_rate;
-#else
-	if (target_rate > low)
-		return high;
-	else
-		return low;
-#endif
-
-}
-
 /*
  * Used for clocks that are part of CLKSEL_xyz governed clocks.
  * REVISIT: Maybe change to use clk->enable() functions like on omap1?
  */
-static void omap2_clksel_recalc(struct clk * clk)
+void omap2_clksel_recalc(struct clk *clk)
 {
-	u32 fixed = 0, div = 0;
+	u32 div = 0;
 
-	if (clk == &dpll_ck) {
-		clk->rate = omap2_get_dpll_rate(clk);
-		fixed = 1;
-		div = 0;
-	}
+	pr_debug("clock: recalc'ing clksel clk %s\n", clk->name);
 
-	if (clk == &iva1_mpu_int_ifck) {
-		div = 2;
-		fixed = 1;
-	}
-
-	if ((clk == &dss1_fck) && ((CM_CLKSEL1_CORE & (0x1f << 8)) == 0)) {
-		clk->rate = sys_ck.rate;
+	div = omap2_clksel_get_divisor(clk);
+	if (div == 0)
 		return;
-	}
 
-	if (!fixed) {
-		div = omap2_clksel_get_divisor(clk);
-		if (div == 0)
-			return;
-	}
+	if (unlikely(clk->rate == clk->parent->rate / div))
+		return;
+	clk->rate = clk->parent->rate / div;
 
-	if (div != 0) {
-		if (unlikely(clk->rate == clk->parent->rate / div))
-			return;
-		clk->rate = clk->parent->rate / div;
-	}
+	pr_debug("clock: new clock rate is %ld (div %d)\n", clk->rate, div);
 
 	if (unlikely(clk->flags & RATE_PROPAGATES))
 		propagate_rate(clk);
 }
 
-/*
- * Finds best divider value in an array based on the source and target
- * rates. The divider array must be sorted with smallest divider first.
+/**
+ * omap2_get_clksel_by_parent - return clksel struct for a given clk & parent
+ * @clk: OMAP struct clk ptr to inspect
+ * @src_clk: OMAP struct clk ptr of the parent clk to search for
+ *
+ * Scan the struct clksel array associated with the clock to find
+ * the element associated with the supplied parent clock address.
+ * Returns a pointer to the struct clksel on success or NULL on error.
  */
-static inline u32 omap2_divider_from_table(u32 size, u32 *div_array,
-					   u32 src_rate, u32 tgt_rate)
+const struct clksel *omap2_get_clksel_by_parent(struct clk *clk,
+						struct clk *src_clk)
 {
-	int i, test_rate;
+	const struct clksel *clks;
 
-	if (div_array == NULL)
-		return ~1;
+	if (!clk->clksel)
+		return NULL;
 
-	for (i=0; i < size; i++) {
-		test_rate = src_rate / *div_array;
-		if (test_rate <= tgt_rate)
-			return *div_array;
-		++div_array;
+	for (clks = clk->clksel; clks->parent; clks++) {
+		if (clks->parent == src_clk)
+			break; /* Found the requested parent */
 	}
 
-	return ~0;	/* No acceptable divider */
+	if (!clks->parent) {
+		printk(KERN_ERR "clock: Could not find parent clock %s in "
+		       "clksel array of clock %s\n", src_clk->name,
+		       clk->name);
+		return NULL;
+	}
+
+	return clks;
 }
 
-/*
- * Find divisor for the given clock and target rate.
+/**
+ * omap2_clksel_round_rate_div - find divisor for the given clock and rate
+ * @clk: OMAP struct clk to use
+ * @target_rate: desired clock rate
+ * @new_div: ptr to where we should store the divisor
  *
+ * Finds 'best' divider value in an array based on the source and target
+ * rates.  The divider array must be sorted with smallest divider first.
  * Note that this will not work for clocks which are part of CONFIG_PARTICIPANT,
  * they are only settable as part of virtual_prcm set.
+ *
+ * Returns the rounded clock rate or returns 0xffffffff on error.
  */
-static u32 omap2_clksel_round_rate(struct clk *tclk, u32 target_rate,
-	u32 *new_div)
+u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
+				u32 *new_div)
 {
-	u32 gfx_div[] = {2, 3, 4};
-	u32 sysclkout_div[] = {1, 2, 4, 8, 16};
-	u32 dss1_div[] = {1, 2, 3, 4, 5, 6, 8, 9, 12, 16};
-	u32 vylnq_div[] = {1, 2, 3, 4, 6, 8, 9, 12, 16, 18};
-	u32 best_div = ~0, asize = 0;
-	u32 *div_array = NULL;
-
-	switch (tclk->flags & SRC_RATE_SEL_MASK) {
-	case CM_GFX_SEL1:
-		asize = 3;
-		div_array = gfx_div;
-		break;
-	case CM_PLL_SEL1:
-		return omap2_dpll_round_rate(target_rate);
-	case CM_SYSCLKOUT_SEL1:
-		asize = 5;
-		div_array = sysclkout_div;
-		break;
-	case CM_CORE_SEL1:
-		if(tclk == &dss1_fck){
-			if(tclk->parent == &core_ck){
-				asize = 10;
-				div_array = dss1_div;
-			} else {
-				*new_div = 0; /* fixed clk */
-				return(tclk->parent->rate);
-			}
-		} else if((tclk == &vlynq_fck) && cpu_is_omap2420()){
-			if(tclk->parent == &core_ck){
-				asize = 10;
-				div_array = vylnq_div;
-			} else {
-				*new_div = 0; /* fixed clk */
-				return(tclk->parent->rate);
-			}
-		}
-		break;
+	unsigned long test_rate;
+	const struct clksel *clks;
+	const struct clksel_rate *clkr;
+	u32 last_div = 0;
+
+	printk(KERN_INFO "clock: clksel_round_rate_div: %s target_rate %ld\n",
+	       clk->name, target_rate);
+
+	*new_div = 1;
+
+	clks = omap2_get_clksel_by_parent(clk, clk->parent);
+	if (clks == NULL)
+		return ~0;
+
+	for (clkr = clks->rates; clkr->div; clkr++) {
+		if (!(clkr->flags & cpu_mask))
+		    continue;
+
+		/* Sanity check */
+		if (clkr->div <= last_div)
+			printk(KERN_ERR "clock: clksel_rate table not sorted "
+			       "for clock %s", clk->name);
+
+		last_div = clkr->div;
+
+		test_rate = clk->parent->rate / clkr->div;
+
+		if (test_rate <= target_rate)
+			break; /* found it */
 	}
 
-	best_div = omap2_divider_from_table(asize, div_array,
-	 tclk->parent->rate, target_rate);
-	if (best_div == ~0){
-		*new_div = 1;
-		return best_div; /* signal error */
+	if (!clkr->div) {
+		printk(KERN_ERR "clock: Could not find divisor for target "
+		       "rate %ld for clock %s parent %s\n", target_rate,
+		       clk->name, clk->parent->name);
+		return ~0;
 	}
 
-	*new_div = best_div;
-	return (tclk->parent->rate / best_div);
+	*new_div = clkr->div;
+
+	printk(KERN_INFO "clock: new_div = %d, new_rate = %ld\n", *new_div,
+	       (clk->parent->rate / clkr->div));
+
+	return (clk->parent->rate / clkr->div);
 }
 
-/* Given a clock and a rate apply a clock specific rounding function */
-static long omap2_clk_round_rate(struct clk *clk, unsigned long rate)
+/**
+ * omap2_clksel_round_rate - find rounded rate for the given clock and rate
+ * @clk: OMAP struct clk to use
+ * @target_rate: desired clock rate
+ *
+ * Compatibility wrapper for OMAP clock framework
+ * Finds best target rate based on the source clock and possible dividers.
+ * rates. The divider array must be sorted with smallest divider first.
+ * Note that this will not work for clocks which are part of CONFIG_PARTICIPANT,
+ * they are only settable as part of virtual_prcm set.
+ *
+ * Returns the rounded clock rate or returns 0xffffffff on error.
+ */
+long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate)
 {
-	u32 new_div = 0;
-	int valid_rate;
+	u32 new_div;
 
-	if (clk->flags & RATE_FIXED)
-		return clk->rate;
+	return omap2_clksel_round_rate_div(clk, target_rate, &new_div);
+}
 
-	if (clk->flags & RATE_CKCTL) {
-		valid_rate = omap2_clksel_round_rate(clk, rate, &new_div);
-		return valid_rate;
-	}
 
+/* Given a clock and a rate apply a clock specific rounding function */
+long omap2_clk_round_rate(struct clk *clk, unsigned long rate)
+{
 	if (clk->round_rate != 0)
 		return clk->round_rate(clk, rate);
 
+	if (clk->flags & RATE_FIXED)
+		printk(KERN_ERR "clock: generic omap2_clk_round_rate called "
+		       "on fixed-rate clock %s\n", clk->name);
+
 	return clk->rate;
 }
 
-/*
- * Check the DLL lock state, and return tue if running in unlock mode.
- * This is needed to compensate for the shifted DLL value in unlock mode.
+/**
+ * omap2_clksel_to_divisor() - turn clksel field value into integer divider
+ * @clk: OMAP struct clk to use
+ * @field_val: register field value to find
+ *
+ * Given a struct clk of a rate-selectable clksel clock, and a register field
+ * value to search for, find the corresponding clock divisor.  The register
+ * field value should be pre-masked and shifted down so the LSB is at bit 0
+ * before calling.  Returns 0 on error
  */
-static u32 omap2_dll_force_needed(void)
+u32 omap2_clksel_to_divisor(struct clk *clk, u32 field_val)
 {
-	u32 dll_state = SDRC_DLLA_CTRL;		/* dlla and dllb are a set */
+	const struct clksel *clks;
+	const struct clksel_rate *clkr;
 
-	if ((dll_state & (1 << 2)) == (1 << 2))
-		return 1;
-	else
+	clks = omap2_get_clksel_by_parent(clk, clk->parent);
+	if (clks == NULL)
 		return 0;
-}
 
-static u32 omap2_reprogram_sdrc(u32 level, u32 force)
-{
-	u32 slow_dll_ctrl, fast_dll_ctrl, m_type;
-	u32 prev = curr_perf_level, flags;
-
-	if ((curr_perf_level == level) && !force)
-		return prev;
-
-	m_type = omap2_memory_get_type();
-	slow_dll_ctrl = omap2_memory_get_slow_dll_ctrl();
-	fast_dll_ctrl = omap2_memory_get_fast_dll_ctrl();
-
-	if (level == PRCM_HALF_SPEED) {
-		local_irq_save(flags);
-		PRCM_VOLTSETUP = 0xffff;
-		omap2_sram_reprogram_sdrc(PRCM_HALF_SPEED,
-					  slow_dll_ctrl, m_type);
-		curr_perf_level = PRCM_HALF_SPEED;
-		local_irq_restore(flags);
+	for (clkr = clks->rates; clkr->div; clkr++) {
+		if ((clkr->flags & cpu_mask) && (clkr->val == field_val))
+			break;
 	}
-	if (level == PRCM_FULL_SPEED) {
-		local_irq_save(flags);
-		PRCM_VOLTSETUP = 0xffff;
-		omap2_sram_reprogram_sdrc(PRCM_FULL_SPEED,
-					  fast_dll_ctrl, m_type);
-		curr_perf_level = PRCM_FULL_SPEED;
-		local_irq_restore(flags);
+
+	if (!clkr->div) {
+		printk(KERN_ERR "clock: Could not find fieldval %d for "
+		       "clock %s parent %s\n", field_val, clk->name,
+		       clk->parent->name);
+		return 0;
 	}
 
-	return prev;
+	return clkr->div;
 }
 
-static int omap2_reprogram_dpll(struct clk * clk, unsigned long rate)
+/**
+ * omap2_divisor_to_clksel() - turn clksel integer divisor into a field value
+ * @clk: OMAP struct clk to use
+ * @div: integer divisor to search for
+ *
+ * Given a struct clk of a rate-selectable clksel clock, and a clock divisor,
+ * find the corresponding register field value.  The return register value is
+ * the value before left-shifting.  Returns 0xffffffff on error
+ */
+u32 omap2_divisor_to_clksel(struct clk *clk, u32 div)
 {
-	u32 flags, cur_rate, low, mult, div, valid_rate, done_rate;
-	u32 bypass = 0;
-	struct prcm_config tmpset;
-	int ret = -EINVAL;
+	const struct clksel *clks;
+	const struct clksel_rate *clkr;
 
-	local_irq_save(flags);
-	cur_rate = omap2_get_dpll_rate(&dpll_ck);
-	mult = CM_CLKSEL2_PLL & 0x3;
-
-	if ((rate == (cur_rate / 2)) && (mult == 2)) {
-		omap2_reprogram_sdrc(PRCM_HALF_SPEED, 1);
-	} else if ((rate == (cur_rate * 2)) && (mult == 1)) {
-		omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1);
-	} else if (rate != cur_rate) {
-		valid_rate = omap2_dpll_round_rate(rate);
-		if (valid_rate != rate)
-			goto dpll_exit;
-
-		if ((CM_CLKSEL2_PLL & 0x3) == 1)
-			low = curr_prcm_set->dpll_speed;
-		else
-			low = curr_prcm_set->dpll_speed / 2;
-
-		tmpset.cm_clksel1_pll = CM_CLKSEL1_PLL;
-		tmpset.cm_clksel1_pll &= ~(0x3FFF << 8);
-		div = ((curr_prcm_set->xtal_speed / 1000000) - 1);
-		tmpset.cm_clksel2_pll = CM_CLKSEL2_PLL;
-		tmpset.cm_clksel2_pll &= ~0x3;
-		if (rate > low) {
-			tmpset.cm_clksel2_pll |= 0x2;
-			mult = ((rate / 2) / 1000000);
-			done_rate = PRCM_FULL_SPEED;
-		} else {
-			tmpset.cm_clksel2_pll |= 0x1;
-			mult = (rate / 1000000);
-			done_rate = PRCM_HALF_SPEED;
-		}
-		tmpset.cm_clksel1_pll |= ((div << 8) | (mult << 12));
-
-		/* Worst case */
-		tmpset.base_sdrc_rfr = V24XX_SDRC_RFR_CTRL_BYPASS;
-
-		if (rate == curr_prcm_set->xtal_speed)	/* If asking for 1-1 */
-			bypass = 1;
+	/* should never happen */
+	WARN_ON(div == 0);
 
-		omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1); /* For init_mem */
-
-		/* Force dll lock mode */
-		omap2_set_prcm(tmpset.cm_clksel1_pll, tmpset.base_sdrc_rfr,
-			       bypass);
+	clks = omap2_get_clksel_by_parent(clk, clk->parent);
+	if (clks == NULL)
+		return 0;
 
-		/* Errata: ret dll entry state */
-		omap2_init_memory_params(omap2_dll_force_needed());
-		omap2_reprogram_sdrc(done_rate, 0);
+	for (clkr = clks->rates; clkr->div; clkr++) {
+		if ((clkr->flags & cpu_mask) && (clkr->div == div))
+			break;
 	}
-	omap2_clksel_recalc(&dpll_ck);
-	ret = 0;
 
-dpll_exit:
-	local_irq_restore(flags);
-	return(ret);
-}
+	if (!clkr->div) {
+		printk(KERN_ERR "clock: Could not find divisor %d for "
+		       "clock %s parent %s\n", div, clk->name,
+		       clk->parent->name);
+		return 0;
+	}
 
-/* Just return the MPU speed */
-static void omap2_mpu_recalc(struct clk * clk)
-{
-	clk->rate = curr_prcm_set->mpu_speed;
+	return clkr->val;
 }
 
-/*
- * Look for a rate equal or less than the target rate given a configuration set.
+/**
+ * omap2_get_clksel - find clksel register addr & field mask for a clk
+ * @clk: struct clk to use
+ * @field_mask: ptr to u32 to store the register field mask
  *
- * What's not entirely clear is "which" field represents the key field.
- * Some might argue L3-DDR, others ARM, others IVA. This code is simple and
- * just uses the ARM rates.
+ * Returns the address of the clksel register upon success or NULL on error.
  */
-static long omap2_round_to_table_rate(struct clk * clk, unsigned long rate)
+void __iomem *omap2_get_clksel(struct clk *clk, u32 *field_mask)
 {
-	struct prcm_config * ptr;
-	long highest_rate;
-
-	if (clk != &virt_prcm_set)
-		return -EINVAL;
-
-	highest_rate = -EINVAL;
-
-	for (ptr = rate_table; ptr->mpu_speed; ptr++) {
-		if (ptr->xtal_speed != sys_ck.rate)
-			continue;
+	if (unlikely((clk->clksel_reg == 0) || (clk->clksel_mask == 0)))
+		return NULL;
 
-		highest_rate = ptr->mpu_speed;
+	*field_mask = clk->clksel_mask;
 
-		/* Can check only after xtal frequency check */
-		if (ptr->mpu_speed <= rate)
-			break;
-	}
-	return highest_rate;
+	return clk->clksel_reg;
 }
 
-/*
- * omap2_convert_field_to_div() - turn field value into integer divider
+/**
+ * omap2_clksel_get_divisor - get current divider applied to parent clock.
+ * @clk: OMAP struct clk to use.
+ *
+ * Returns the integer divisor upon success or 0 on error.
  */
-static u32 omap2_clksel_to_divisor(u32 div_sel, u32 field_val)
+u32 omap2_clksel_get_divisor(struct clk *clk)
 {
-	u32 i;
-	u32 clkout_array[] = {1, 2, 4, 8, 16};
+	u32 field_mask, field_val;
+	void __iomem *div_addr;
 
-	if ((div_sel & SRC_RATE_SEL_MASK) == CM_SYSCLKOUT_SEL1) {
-		for (i = 0; i < 5; i++) {
-			if (field_val == i)
-				return clkout_array[i];
-		}
-		return ~0;
-	} else
-		return field_val;
+	div_addr = omap2_get_clksel(clk, &field_mask);
+	if (div_addr == 0)
+		return 0;
+
+	field_val = __raw_readl(div_addr) & field_mask;
+	field_val >>= __ffs(field_mask);
+
+	return omap2_clksel_to_divisor(clk, field_val);
 }
 
-/*
- * Returns the CLKSEL divider register value
- * REVISIT: This should be cleaned up to work nicely with void __iomem *
- */
-static u32 omap2_get_clksel(u32 *div_sel, u32 *field_mask,
-			    struct clk *clk)
+int omap2_clksel_set_rate(struct clk *clk, unsigned long rate)
 {
-	int ret = ~0;
-	u32 reg_val, div_off;
-	u32 div_addr = 0;
-	u32 mask = ~0;
-
-	div_off = clk->rate_offset;
-
-	switch ((*div_sel & SRC_RATE_SEL_MASK)) {
-	case CM_MPU_SEL1:
-		div_addr = (u32)&CM_CLKSEL_MPU;
-		mask = 0x1f;
-		break;
-	case CM_DSP_SEL1:
-		div_addr = (u32)&CM_CLKSEL_DSP;
-		if (cpu_is_omap2420()) {
-			if ((div_off == 0) || (div_off == 8))
-				mask = 0x1f;
-			else if (div_off == 5)
-				mask = 0x3;
-		} else if (cpu_is_omap2430()) {
-			if (div_off == 0)
-				mask = 0x1f;
-			else if (div_off == 5)
-				mask = 0x3;
-		}
-		break;
-	case CM_GFX_SEL1:
-		div_addr = (u32)&CM_CLKSEL_GFX;
-		if (div_off == 0)
-			mask = 0x7;
-		break;
-	case CM_MODEM_SEL1:
-		div_addr = (u32)&CM_CLKSEL_MDM;
-		if (div_off == 0)
-			mask = 0xf;
-		break;
-	case CM_SYSCLKOUT_SEL1:
-		div_addr = (u32)&PRCM_CLKOUT_CTRL;
-		if ((div_off == 3) || (div_off == 11))
-			mask= 0x3;
-		break;
-	case CM_CORE_SEL1:
-		div_addr = (u32)&CM_CLKSEL1_CORE;
-		switch (div_off) {
-		case 0:					/* l3 */
-		case 8:					/* dss1 */
-		case 15:				/* vylnc-2420 */
-		case 20:				/* ssi */
-			mask = 0x1f; break;
-		case 5:					/* l4 */
-			mask = 0x3; break;
-		case 13:				/* dss2 */
-			mask = 0x1; break;
-		case 25:				/* usb */
-			mask = 0x7; break;
-		}
-	}
+	u32 field_mask, field_val, reg_val, validrate, new_div = 0;
+	void __iomem *div_addr;
 
-	*field_mask = mask;
+	validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
+	if (validrate != rate)
+		return -EINVAL;
 
-	if (unlikely(mask == ~0))
-		div_addr = 0;
+	div_addr = omap2_get_clksel(clk, &field_mask);
+	if (div_addr == 0)
+		return -EINVAL;
 
-	*div_sel = div_addr;
+	field_val = omap2_divisor_to_clksel(clk, new_div);
+	if (field_val == ~0)
+		return -EINVAL;
 
-	if (unlikely(div_addr == 0))
-		return ret;
+	reg_val = __raw_readl(div_addr);
+	reg_val &= ~field_mask;
+	reg_val |= (field_val << __ffs(field_mask));
+	__raw_writel(reg_val, div_addr);
+	wmb();
 
-	/* Isolate field */
-	reg_val = __raw_readl((void __iomem *)div_addr) & (mask << div_off);
+	clk->rate = clk->parent->rate / new_div;
 
-	/* Normalize back to divider value */
-	reg_val >>= div_off;
+	if (clk->flags & DELAYED_APP && cpu_is_omap24xx()) {
+		__raw_writel(OMAP24XX_VALID_CONFIG, OMAP24XX_PRCM_CLKCFG_CTRL);
+		wmb();
+	}
 
-	return reg_val;
+	return 0;
 }
 
-/*
- * Return divider to be applied to parent clock.
- * Return 0 on error.
- */
-static u32 omap2_clksel_get_divisor(struct clk *clk)
-{
-	int ret = 0;
-	u32 div, div_sel, div_off, field_mask, field_val;
-
-	/* isolate control register */
-	div_sel = (SRC_RATE_SEL_MASK & clk->flags);
-
-	div_off = clk->rate_offset;
-	field_val = omap2_get_clksel(&div_sel, &field_mask, clk);
-	if (div_sel == 0)
-		return ret;
-
-	div_sel = (SRC_RATE_SEL_MASK & clk->flags);
-	div = omap2_clksel_to_divisor(div_sel, field_val);
-
-	return div;
-}
 
 /* Set the clock rate for a clock source */
-static int omap2_clk_set_rate(struct clk *clk, unsigned long rate)
-
+int omap2_clk_set_rate(struct clk *clk, unsigned long rate)
 {
 	int ret = -EINVAL;
-	void __iomem * reg;
-	u32 div_sel, div_off, field_mask, field_val, reg_val, validrate;
-	u32 new_div = 0;
-
-	if (!(clk->flags & CONFIG_PARTICIPANT) && (clk->flags & RATE_CKCTL)) {
-		if (clk == &dpll_ck)
-			return omap2_reprogram_dpll(clk, rate);
-
-		/* Isolate control register */
-		div_sel = (SRC_RATE_SEL_MASK & clk->flags);
-		div_off = clk->rate_offset;
-
-		validrate = omap2_clksel_round_rate(clk, rate, &new_div);
-		if (validrate != rate)
-			return(ret);
 
-		field_val = omap2_get_clksel(&div_sel, &field_mask, clk);
-		if (div_sel == 0)
-			return ret;
-
-		if (clk->flags & CM_SYSCLKOUT_SEL1) {
-			switch (new_div) {
-			case 16:
-				field_val = 4;
-				break;
-			case 8:
-				field_val = 3;
-				break;
-			case 4:
-				field_val = 2;
-				break;
-			case 2:
-				field_val = 1;
-				break;
-			case 1:
-				field_val = 0;
-				break;
-			}
-		} else
-			field_val = new_div;
+	pr_debug("clock: set_rate for clock %s to rate %ld\n", clk->name, rate);
 
-		reg = (void __iomem *)div_sel;
-
-		reg_val = __raw_readl(reg);
-		reg_val &= ~(field_mask << div_off);
-		reg_val |= (field_val << div_off);
-		__raw_writel(reg_val, reg);
-		wmb();
-		clk->rate = clk->parent->rate / field_val;
+	/* CONFIG_PARTICIPANT clocks are changed only in sets via the
+	   rate table mechanism, driven by mpu_speed  */
+	if (clk->flags & CONFIG_PARTICIPANT)
+		return -EINVAL;
 
-		if (clk->flags & DELAYED_APP) {
-			__raw_writel(0x1, (void __iomem *)&PRCM_CLKCFG_CTRL);
-			wmb();
-		}
-		ret = 0;
-	} else if (clk->set_rate != 0)
+	/* dpll_ck, core_ck, virt_prcm_set; plus all clksel clocks */
+	if (clk->set_rate != 0)
 		ret = clk->set_rate(clk, rate);
 
 	if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES)))
@@ -782,242 +631,92 @@ static int omap2_clk_set_rate(struct clk *clk, unsigned long rate)
 	return ret;
 }
 
-/* Converts encoded control register address into a full address */
-static u32 omap2_get_src_field(u32 *type_to_addr, u32 reg_offset,
-			       struct clk *src_clk, u32 *field_mask)
-{
-	u32 val = ~0, src_reg_addr = 0, mask = 0;
-
-	/* Find target control register.*/
-	switch ((*type_to_addr & SRC_RATE_SEL_MASK)) {
-	case CM_CORE_SEL1:
-		src_reg_addr = (u32)&CM_CLKSEL1_CORE;
-		if (reg_offset == 13) {			/* DSS2_fclk */
-			mask = 0x1;
-			if (src_clk == &sys_ck)
-				val = 0;
-			if (src_clk == &func_48m_ck)
-				val = 1;
-		} else if (reg_offset == 8) {		/* DSS1_fclk */
-			mask = 0x1f;
-			if (src_clk == &sys_ck)
-				val = 0;
-			else if (src_clk == &core_ck)	/* divided clock */
-				val = 0x10;		/* rate needs fixing */
-		} else if ((reg_offset == 15) && cpu_is_omap2420()){ /*vlnyq*/
-			mask = 0x1F;
-			if(src_clk == &func_96m_ck)
-				val = 0;
-			else if (src_clk == &core_ck)
-				val = 0x10;
-		}
-		break;
-	case CM_CORE_SEL2:
-		src_reg_addr = (u32)&CM_CLKSEL2_CORE;
-		mask = 0x3;
-		if (src_clk == &func_32k_ck)
-			val = 0x0;
-		if (src_clk == &sys_ck)
-			val = 0x1;
-		if (src_clk == &alt_ck)
-			val = 0x2;
-		break;
-	case CM_WKUP_SEL1:
-		src_reg_addr = (u32)&CM_CLKSEL_WKUP;
-		mask = 0x3;
-		if (src_clk == &func_32k_ck)
-			val = 0x0;
-		if (src_clk == &sys_ck)
-			val = 0x1;
-		if (src_clk == &alt_ck)
-			val = 0x2;
-		break;
-	case CM_PLL_SEL1:
-		src_reg_addr = (u32)&CM_CLKSEL1_PLL;
-		mask = 0x1;
-		if (reg_offset == 0x3) {
-			if (src_clk == &apll96_ck)
-				val = 0;
-			if (src_clk == &alt_ck)
-				val = 1;
-		}
-		else if (reg_offset == 0x5) {
-			if (src_clk == &apll54_ck)
-				val = 0;
-			if (src_clk == &alt_ck)
-				val = 1;
-		}
-		break;
-	case CM_PLL_SEL2:
-		src_reg_addr = (u32)&CM_CLKSEL2_PLL;
-		mask = 0x3;
-		if (src_clk == &func_32k_ck)
-			val = 0x0;
-		if (src_clk == &dpll_ck)
-			val = 0x2;
-		break;
-	case CM_SYSCLKOUT_SEL1:
-		src_reg_addr = (u32)&PRCM_CLKOUT_CTRL;
-		mask = 0x3;
-		if (src_clk == &dpll_ck)
-			val = 0;
-		if (src_clk == &sys_ck)
-			val = 1;
-		if (src_clk == &func_96m_ck)
-			val = 2;
-		if (src_clk == &func_54m_ck)
-			val = 3;
-		break;
-	}
-
-	if (val == ~0)			/* Catch errors in offset */
-		*type_to_addr = 0;
-	else
-		*type_to_addr = src_reg_addr;
-	*field_mask = mask;
-
-	return val;
-}
-
-static int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
+/*
+ * Converts encoded control register address into a full address
+ * On error, *src_addr will be returned as 0.
+ */
+static u32 omap2_clksel_get_src_field(void __iomem **src_addr,
+				      struct clk *src_clk, u32 *field_mask,
+				      struct clk *clk, u32 *parent_div)
 {
-	void __iomem * reg;
-	u32 src_sel, src_off, field_val, field_mask, reg_val, rate;
-	int ret = -EINVAL;
-
-	if (unlikely(clk->flags & CONFIG_PARTICIPANT))
-		return ret;
-
-	if (clk->flags & SRC_SEL_MASK) {	/* On-chip SEL collection */
-		src_sel = (SRC_RATE_SEL_MASK & clk->flags);
-		src_off = clk->src_offset;
-
-		if (src_sel == 0)
-			goto set_parent_error;
-
-		field_val = omap2_get_src_field(&src_sel, src_off, new_parent,
-						&field_mask);
-
-		reg = (void __iomem *)src_sel;
-
-		if (clk->usecount > 0)
-			_omap2_clk_disable(clk);
-
-		/* Set new source value (previous dividers if any in effect) */
-		reg_val = __raw_readl(reg) & ~(field_mask << src_off);
-		reg_val |= (field_val << src_off);
-		__raw_writel(reg_val, reg);
-		wmb();
+	const struct clksel *clks;
+	const struct clksel_rate *clkr;
 
-		if (clk->flags & DELAYED_APP) {
-			__raw_writel(0x1, (void __iomem *)&PRCM_CLKCFG_CTRL);
-			wmb();
-		}
-		if (clk->usecount > 0)
-			_omap2_clk_enable(clk);
-
-		clk->parent = new_parent;
+	*parent_div = 0;
+	*src_addr = 0;
 
-		/* SRC_RATE_SEL_MASK clocks follow their parents rates.*/
-		if ((new_parent == &core_ck) && (clk == &dss1_fck))
-			clk->rate = new_parent->rate / 0x10;
-		else
-			clk->rate = new_parent->rate;
+	clks = omap2_get_clksel_by_parent(clk, src_clk);
+	if (clks == NULL)
+		return 0;
 
-		if (unlikely(clk->flags & RATE_PROPAGATES))
-			propagate_rate(clk);
+	for (clkr = clks->rates; clkr->div; clkr++) {
+		if (clkr->flags & (cpu_mask | DEFAULT_RATE))
+			break; /* Found the default rate for this platform */
+	}
 
+	if (!clkr->div) {
+		printk(KERN_ERR "clock: Could not find default rate for "
+		       "clock %s parent %s\n", clk->name,
+		       src_clk->parent->name);
 		return 0;
-	} else {
-		clk->parent = new_parent;
-		rate = new_parent->rate;
-		omap2_clk_set_rate(clk, rate);
-		ret = 0;
 	}
 
- set_parent_error:
-	return ret;
+	/* Should never happen.  Add a clksel mask to the struct clk. */
+	WARN_ON(clk->clksel_mask == 0);
+
+	*field_mask = clk->clksel_mask;
+	*src_addr = clk->clksel_reg;
+	*parent_div = clkr->div;
+
+	return clkr->val;
 }
 
-/* Sets basic clocks based on the specified rate */
-static int omap2_select_table_rate(struct clk * clk, unsigned long rate)
+int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
 {
-	u32 flags, cur_rate, done_rate, bypass = 0;
-	u8 cpu_mask = 0;
-	struct prcm_config *prcm;
-	unsigned long found_speed = 0;
+	void __iomem *src_addr;
+	u32 field_val, field_mask, reg_val, parent_div;
 
-	if (clk != &virt_prcm_set)
+	if (unlikely(clk->flags & CONFIG_PARTICIPANT))
 		return -EINVAL;
 
-	/* FIXME: Change cpu_is_omap2420() to cpu_is_omap242x() */
-	if (cpu_is_omap2420())
-		cpu_mask = RATE_IN_242X;
-	else if (cpu_is_omap2430())
-		cpu_mask = RATE_IN_243X;
-
-	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
-		if (!(prcm->flags & cpu_mask))
-			continue;
-
-		if (prcm->xtal_speed != sys_ck.rate)
-			continue;
-
-		if (prcm->mpu_speed <= rate) {
-			found_speed = prcm->mpu_speed;
-			break;
-		}
-	}
-
-	if (!found_speed) {
-		printk(KERN_INFO "Could not set MPU rate to %luMHz\n",
-	 rate / 1000000);
+	if (!clk->clksel)
 		return -EINVAL;
-	}
-
-	curr_prcm_set = prcm;
-	cur_rate = omap2_get_dpll_rate(&dpll_ck);
-
-	if (prcm->dpll_speed == cur_rate / 2) {
-		omap2_reprogram_sdrc(PRCM_HALF_SPEED, 1);
-	} else if (prcm->dpll_speed == cur_rate * 2) {
-		omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1);
-	} else if (prcm->dpll_speed != cur_rate) {
-		local_irq_save(flags);
 
-		if (prcm->dpll_speed == prcm->xtal_speed)
-			bypass = 1;
+	field_val = omap2_clksel_get_src_field(&src_addr, new_parent,
+					       &field_mask, clk, &parent_div);
+	if (src_addr == 0)
+		return -EINVAL;
 
-		if ((prcm->cm_clksel2_pll & 0x3) == 2)
-			done_rate = PRCM_FULL_SPEED;
-		else
-			done_rate = PRCM_HALF_SPEED;
+	if (clk->usecount > 0)
+		_omap2_clk_disable(clk);
 
-		/* MPU divider */
-		CM_CLKSEL_MPU = prcm->cm_clksel_mpu;
+	/* Set new source value (previous dividers if any in effect) */
+	reg_val = __raw_readl(src_addr) & ~field_mask;
+	reg_val |= (field_val << __ffs(field_mask));
+	__raw_writel(reg_val, src_addr);
+	wmb();
 
-		/* dsp + iva1 div(2420), iva2.1(2430) */
-		CM_CLKSEL_DSP = prcm->cm_clksel_dsp;
+	if (clk->flags & DELAYED_APP && cpu_is_omap24xx()) {
+		__raw_writel(OMAP24XX_VALID_CONFIG, OMAP24XX_PRCM_CLKCFG_CTRL);
+		wmb();
+	}
 
-		CM_CLKSEL_GFX = prcm->cm_clksel_gfx;
+	if (clk->usecount > 0)
+		_omap2_clk_enable(clk);
 
-		/* Major subsystem dividers */
-		CM_CLKSEL1_CORE = prcm->cm_clksel1_core;
-		if (cpu_is_omap2430())
-			CM_CLKSEL_MDM = prcm->cm_clksel_mdm;
+	clk->parent = new_parent;
 
-		/* x2 to enter init_mem */
-		omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1);
+	/* CLKSEL clocks follow their parents' rates, divided by a divisor */
+	clk->rate = new_parent->rate;
 
-		omap2_set_prcm(prcm->cm_clksel1_pll, prcm->base_sdrc_rfr,
-			       bypass);
+	if (parent_div > 0)
+		clk->rate /= parent_div;
 
-		omap2_init_memory_params(omap2_dll_force_needed());
-		omap2_reprogram_sdrc(done_rate, 0);
+	pr_debug("clock: set parent of %s to %s (new rate %ld)\n",
+		 clk->name, clk->parent->name, clk->rate);
 
-		local_irq_restore(flags);
-	}
-	omap2_clksel_recalc(&dpll_ck);
+	if (unlikely(clk->flags & RATE_PROPAGATES))
+		propagate_rate(clk);
 
 	return 0;
 }
@@ -1027,150 +726,17 @@ static int omap2_select_table_rate(struct clk * clk, unsigned long rate)
  *-------------------------------------------------------------------------*/
 
 #ifdef CONFIG_OMAP_RESET_CLOCKS
-static void __init omap2_clk_disable_unused(struct clk *clk)
+void omap2_clk_disable_unused(struct clk *clk)
 {
-	u32 regval32;
+	u32 regval32, v;
+
+	v = (clk->flags & INVERT_ENABLE) ? (1 << clk->enable_bit) : 0;
 
 	regval32 = __raw_readl(clk->enable_reg);
-	if ((regval32 & (1 << clk->enable_bit)) == 0)
+	if ((regval32 & (1 << clk->enable_bit)) == v)
 		return;
 
 	printk(KERN_INFO "Disabling unused clock \"%s\"\n", clk->name);
 	_omap2_clk_disable(clk);
 }
-#else
-#define omap2_clk_disable_unused	NULL
 #endif
-
-static struct clk_functions omap2_clk_functions = {
-	.clk_enable		= omap2_clk_enable,
-	.clk_disable		= omap2_clk_disable,
-	.clk_round_rate		= omap2_clk_round_rate,
-	.clk_set_rate		= omap2_clk_set_rate,
-	.clk_set_parent		= omap2_clk_set_parent,
-	.clk_disable_unused	= omap2_clk_disable_unused,
-};
-
-static void __init omap2_get_crystal_rate(struct clk *osc, struct clk *sys)
-{
-	u32 div, aplls, sclk = 13000000;
-
-	aplls = CM_CLKSEL1_PLL;
-	aplls &= ((1 << 23) | (1 << 24) | (1 << 25));
-	aplls >>= 23;			/* Isolate field, 0,2,3 */
-
-	if (aplls == 0)
-		sclk = 19200000;
-	else if (aplls == 2)
-		sclk = 13000000;
-	else if (aplls == 3)
-		sclk = 12000000;
-
-	div = PRCM_CLKSRC_CTRL;
-	div &= ((1 << 7) | (1 << 6));
-	div >>= sys->rate_offset;
-
-	osc->rate = sclk * div;
-	sys->rate = sclk;
-}
-
-/*
- * Set clocks for bypass mode for reboot to work.
- */
-void omap2_clk_prepare_for_reboot(void)
-{
-	u32 rate;
-
-	if (vclk == NULL || sclk == NULL)
-		return;
-
-	rate = clk_get_rate(sclk);
-	clk_set_rate(vclk, rate);
-}
-
-/*
- * Switch the MPU rate if specified on cmdline.
- * We cannot do this early until cmdline is parsed.
- */
-static int __init omap2_clk_arch_init(void)
-{
-	if (!mpurate)
-		return -EINVAL;
-
-	if (omap2_select_table_rate(&virt_prcm_set, mpurate))
-		printk(KERN_ERR "Could not find matching MPU rate\n");
-
-	propagate_rate(&osc_ck);		/* update main root fast */
-	propagate_rate(&func_32k_ck);		/* update main root slow */
-
-	printk(KERN_INFO "Switched to new clocking rate (Crystal/DPLL/MPU): "
-	       "%ld.%01ld/%ld/%ld MHz\n",
-	       (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10,
-	       (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ;
-
-	return 0;
-}
-arch_initcall(omap2_clk_arch_init);
-
-int __init omap2_clk_init(void)
-{
-	struct prcm_config *prcm;
-	struct clk ** clkp;
-	u32 clkrate;
-
-	clk_init(&omap2_clk_functions);
-	omap2_get_crystal_rate(&osc_ck, &sys_ck);
-
-	for (clkp = onchip_clks; clkp < onchip_clks + ARRAY_SIZE(onchip_clks);
-	     clkp++) {
-
-		if ((*clkp)->flags & CLOCK_IN_OMAP242X && cpu_is_omap2420()) {
-			clk_register(*clkp);
-			continue;
-		}
-
-		if ((*clkp)->flags & CLOCK_IN_OMAP243X && cpu_is_omap2430()) {
-			clk_register(*clkp);
-			continue;
-		}
-	}
-
-	/* Check the MPU rate set by bootloader */
-	clkrate = omap2_get_dpll_rate(&dpll_ck);
-	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
-		if (prcm->xtal_speed != sys_ck.rate)
-			continue;
-		if (prcm->dpll_speed <= clkrate)
-			 break;
-	}
-	curr_prcm_set = prcm;
-
-	propagate_rate(&osc_ck);		/* update main root fast */
-	propagate_rate(&func_32k_ck);		/* update main root slow */
-
-	printk(KERN_INFO "Clocking rate (Crystal/DPLL/MPU): "
-	       "%ld.%01ld/%ld/%ld MHz\n",
-	       (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10,
-	       (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ;
-
-	/*
-	 * Only enable those clocks we will need, let the drivers
-	 * enable other clocks as necessary
-	 */
-	clk_enable(&sync_32k_ick);
-	clk_enable(&omapctrl_ick);
-
-	/* Force the APLLs always active. The clocks are idled
-	 * automatically by hardware. */
-	clk_enable(&apll96_ck);
-	clk_enable(&apll54_ck);
-
-	if (cpu_is_omap2430())
-		clk_enable(&sdrc_ick);
-
-	/* Avoid sleeping sleeping during omap2_clk_prepare_for_reboot() */
-	vclk = clk_get(NULL, "virt_prcm_set");
-	sclk = clk_get(NULL, "sys_ck");
-
-	return 0;
-}
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 4f79186..d5980a9 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -1,13 +1,12 @@
 /*
- *  linux/arch/arm/mach-omap24xx/clock.h
+ *  linux/arch/arm/mach-omap2/clock.h
  *
- *  Copyright (C) 2005 Texas Instruments Inc.
- *  Richard Woodruff <r-woodruff2@ti.com>
- *  Created for OMAP2.
+ *  Copyright (C) 2005-2008 Texas Instruments, Inc.
+ *  Copyright (C) 2004-2008 Nokia Corporation
  *
- *  Copyright (C) 2004 Nokia corporation
- *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- *  Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
+ *  Contacts:
+ *  Richard Woodruff <r-woodruff2@ti.com>
+ *  Paul Walmsley
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -17,2095 +16,53 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_H
 #define __ARCH_ARM_MACH_OMAP2_CLOCK_H
 
-static void omap2_sys_clk_recalc(struct clk * clk);
-static void omap2_clksel_recalc(struct clk * clk);
-static void omap2_followparent_recalc(struct clk * clk);
-static void omap2_propagate_rate(struct clk * clk);
-static void omap2_mpu_recalc(struct clk * clk);
-static int omap2_select_table_rate(struct clk * clk, unsigned long rate);
-static long omap2_round_to_table_rate(struct clk * clk, unsigned long rate);
-static void omap2_clk_disable(struct clk *clk);
-static void omap2_sys_clk_recalc(struct clk * clk);
-static u32 omap2_clksel_to_divisor(u32 div_sel, u32 field_val);
-static u32 omap2_clksel_get_divisor(struct clk *clk);
-
-
-#define RATE_IN_242X	(1 << 0)
-#define RATE_IN_243X	(1 << 1)
-
-/* Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
- * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,CM_CLKSEL_DSP
- * CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL CM_CLKSEL2_PLL, CM_CLKSEL_MDM
- */
-struct prcm_config {
-	unsigned long xtal_speed;	/* crystal rate */
-	unsigned long dpll_speed;	/* dpll: out*xtal*M/(N-1)table_recalc */
-	unsigned long mpu_speed;	/* speed of MPU */
-	unsigned long cm_clksel_mpu;	/* mpu divider */
-	unsigned long cm_clksel_dsp;	/* dsp+iva1 div(2420), iva2.1(2430) */
-	unsigned long cm_clksel_gfx;	/* gfx dividers */
-	unsigned long cm_clksel1_core;	/* major subsystem dividers */
-	unsigned long cm_clksel1_pll;	/* m,n */
-	unsigned long cm_clksel2_pll;	/* dpllx1 or x2 out */
-	unsigned long cm_clksel_mdm;	/* modem dividers 2430 only */
-	unsigned long base_sdrc_rfr;	/* base refresh timing for a set */
-	unsigned char flags;
-};
-
-/* Mask for clksel which support parent settign in set_rate */
-#define SRC_SEL_MASK (CM_CORE_SEL1 | CM_CORE_SEL2 | CM_WKUP_SEL1 | \
-			CM_PLL_SEL1 | CM_PLL_SEL2 | CM_SYSCLKOUT_SEL1)
-
-/* Mask for clksel regs which support rate operations */
-#define SRC_RATE_SEL_MASK (CM_MPU_SEL1 | CM_DSP_SEL1 | CM_GFX_SEL1 | \
-			CM_MODEM_SEL1 | CM_CORE_SEL1 | CM_CORE_SEL2 | \
-			CM_WKUP_SEL1 | CM_PLL_SEL1 | CM_PLL_SEL2 | \
-			CM_SYSCLKOUT_SEL1)
-
-/*
- * The OMAP2 processor can be run at several discrete 'PRCM configurations'.
- * These configurations are characterized by voltage and speed for clocks.
- * The device is only validated for certain combinations. One way to express
- * these combinations is via the 'ratio's' which the clocks operate with
- * respect to each other. These ratio sets are for a given voltage/DPLL
- * setting. All configurations can be described by a DPLL setting and a ratio
- * There are 3 ratio sets for the 2430 and X ratio sets for 2420.
- *
- * 2430 differs from 2420 in that there are no more phase synchronizers used.
- * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs
- * 2430 (iva2.1, NOdsp, mdm)
- */
-
-/* Core fields for cm_clksel, not ratio governed */
-#define RX_CLKSEL_DSS1			(0x10 << 8)
-#define RX_CLKSEL_DSS2			(0x0 << 13)
-#define RX_CLKSEL_SSI			(0x5 << 20)
-
-/*-------------------------------------------------------------------------
- * Voltage/DPLL ratios
- *-------------------------------------------------------------------------*/
-
-/* 2430 Ratio's, 2430-Ratio Config 1 */
-#define R1_CLKSEL_L3			(4 << 0)
-#define R1_CLKSEL_L4			(2 << 5)
-#define R1_CLKSEL_USB			(4 << 25)
-#define R1_CM_CLKSEL1_CORE_VAL		R1_CLKSEL_USB | RX_CLKSEL_SSI | \
-					RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
-					R1_CLKSEL_L4 | R1_CLKSEL_L3
-#define R1_CLKSEL_MPU			(2 << 0)
-#define R1_CM_CLKSEL_MPU_VAL		R1_CLKSEL_MPU
-#define R1_CLKSEL_DSP			(2 << 0)
-#define R1_CLKSEL_DSP_IF		(2 << 5)
-#define R1_CM_CLKSEL_DSP_VAL		R1_CLKSEL_DSP | R1_CLKSEL_DSP_IF
-#define R1_CLKSEL_GFX			(2 << 0)
-#define R1_CM_CLKSEL_GFX_VAL		R1_CLKSEL_GFX
-#define R1_CLKSEL_MDM			(4 << 0)
-#define R1_CM_CLKSEL_MDM_VAL		R1_CLKSEL_MDM
-
-/* 2430-Ratio Config 2 */
-#define R2_CLKSEL_L3			(6 << 0)
-#define R2_CLKSEL_L4			(2 << 5)
-#define R2_CLKSEL_USB			(2 << 25)
-#define R2_CM_CLKSEL1_CORE_VAL		R2_CLKSEL_USB | RX_CLKSEL_SSI | \
-					RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
-					R2_CLKSEL_L4 | R2_CLKSEL_L3
-#define R2_CLKSEL_MPU			(2 << 0)
-#define R2_CM_CLKSEL_MPU_VAL		R2_CLKSEL_MPU
-#define R2_CLKSEL_DSP			(2 << 0)
-#define R2_CLKSEL_DSP_IF		(3 << 5)
-#define R2_CM_CLKSEL_DSP_VAL		R2_CLKSEL_DSP | R2_CLKSEL_DSP_IF
-#define R2_CLKSEL_GFX			(2 << 0)
-#define R2_CM_CLKSEL_GFX_VAL		R2_CLKSEL_GFX
-#define R2_CLKSEL_MDM			(6 << 0)
-#define R2_CM_CLKSEL_MDM_VAL		R2_CLKSEL_MDM
-
-/* 2430-Ratio Bootm (BYPASS) */
-#define RB_CLKSEL_L3			(1 << 0)
-#define RB_CLKSEL_L4			(1 << 5)
-#define RB_CLKSEL_USB			(1 << 25)
-#define RB_CM_CLKSEL1_CORE_VAL		RB_CLKSEL_USB | RX_CLKSEL_SSI | \
-					RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
-					RB_CLKSEL_L4 | RB_CLKSEL_L3
-#define RB_CLKSEL_MPU			(1 << 0)
-#define RB_CM_CLKSEL_MPU_VAL		RB_CLKSEL_MPU
-#define RB_CLKSEL_DSP			(1 << 0)
-#define RB_CLKSEL_DSP_IF		(1 << 5)
-#define RB_CM_CLKSEL_DSP_VAL		RB_CLKSEL_DSP | RB_CLKSEL_DSP_IF
-#define RB_CLKSEL_GFX			(1 << 0)
-#define RB_CM_CLKSEL_GFX_VAL		RB_CLKSEL_GFX
-#define RB_CLKSEL_MDM			(1 << 0)
-#define RB_CM_CLKSEL_MDM_VAL		RB_CLKSEL_MDM
-
-/* 2420 Ratio Equivalents */
-#define RXX_CLKSEL_VLYNQ		(0x12 << 15)
-#define RXX_CLKSEL_SSI			(0x8 << 20)
-
-/* 2420-PRCM III 532MHz core */
-#define RIII_CLKSEL_L3			(4 << 0)	/* 133MHz */
-#define RIII_CLKSEL_L4			(2 << 5)	/* 66.5MHz */
-#define RIII_CLKSEL_USB			(4 << 25)	/* 33.25MHz */
-#define RIII_CM_CLKSEL1_CORE_VAL	RIII_CLKSEL_USB | RXX_CLKSEL_SSI | \
-					RXX_CLKSEL_VLYNQ | RX_CLKSEL_DSS2 | \
-					RX_CLKSEL_DSS1 | RIII_CLKSEL_L4 | \
-					RIII_CLKSEL_L3
-#define RIII_CLKSEL_MPU			(2 << 0)	/* 266MHz */
-#define RIII_CM_CLKSEL_MPU_VAL		RIII_CLKSEL_MPU
-#define RIII_CLKSEL_DSP			(3 << 0)	/* c5x - 177.3MHz */
-#define RIII_CLKSEL_DSP_IF		(2 << 5)	/* c5x - 88.67MHz */
-#define RIII_SYNC_DSP			(1 << 7)	/* Enable sync */
-#define RIII_CLKSEL_IVA			(6 << 8)	/* iva1 - 88.67MHz */
-#define RIII_SYNC_IVA			(1 << 13)	/* Enable sync */
-#define RIII_CM_CLKSEL_DSP_VAL		RIII_SYNC_IVA | RIII_CLKSEL_IVA | \
-					RIII_SYNC_DSP | RIII_CLKSEL_DSP_IF | \
-					RIII_CLKSEL_DSP
-#define RIII_CLKSEL_GFX			(2 << 0)	/* 66.5MHz */
-#define RIII_CM_CLKSEL_GFX_VAL		RIII_CLKSEL_GFX
-
-/* 2420-PRCM II 600MHz core */
-#define RII_CLKSEL_L3			(6 << 0)	/* 100MHz */
-#define RII_CLKSEL_L4			(2 << 5)	/* 50MHz */
-#define RII_CLKSEL_USB			(2 << 25)	/* 50MHz */
-#define RII_CM_CLKSEL1_CORE_VAL		RII_CLKSEL_USB | \
-					RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \
-					RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
-					RII_CLKSEL_L4 | RII_CLKSEL_L3
-#define RII_CLKSEL_MPU			(2 << 0)	/* 300MHz */
-#define RII_CM_CLKSEL_MPU_VAL		RII_CLKSEL_MPU
-#define RII_CLKSEL_DSP			(3 << 0)	/* c5x - 200MHz */
-#define RII_CLKSEL_DSP_IF		(2 << 5)	/* c5x - 100MHz */
-#define RII_SYNC_DSP			(0 << 7)	/* Bypass sync */
-#define RII_CLKSEL_IVA			(6 << 8)	/* iva1 - 200MHz */
-#define RII_SYNC_IVA			(0 << 13)	/* Bypass sync */
-#define RII_CM_CLKSEL_DSP_VAL		RII_SYNC_IVA | RII_CLKSEL_IVA | \
-					RII_SYNC_DSP | RII_CLKSEL_DSP_IF | \
-					RII_CLKSEL_DSP
-#define RII_CLKSEL_GFX			(2 << 0)	/* 50MHz */
-#define RII_CM_CLKSEL_GFX_VAL		RII_CLKSEL_GFX
-
-/* 2420-PRCM VII (boot) */
-#define RVII_CLKSEL_L3			(1 << 0)
-#define RVII_CLKSEL_L4			(1 << 5)
-#define RVII_CLKSEL_DSS1		(1 << 8)
-#define RVII_CLKSEL_DSS2		(0 << 13)
-#define RVII_CLKSEL_VLYNQ		(1 << 15)
-#define RVII_CLKSEL_SSI			(1 << 20)
-#define RVII_CLKSEL_USB			(1 << 25)
-
-#define RVII_CM_CLKSEL1_CORE_VAL	RVII_CLKSEL_USB | RVII_CLKSEL_SSI | \
-					RVII_CLKSEL_VLYNQ | RVII_CLKSEL_DSS2 | \
-					RVII_CLKSEL_DSS1 | RVII_CLKSEL_L4 | RVII_CLKSEL_L3
-
-#define RVII_CLKSEL_MPU			(1 << 0) /* all divide by 1 */
-#define RVII_CM_CLKSEL_MPU_VAL		RVII_CLKSEL_MPU
+#include <asm/arch/clock.h>
 
-#define RVII_CLKSEL_DSP			(1 << 0)
-#define RVII_CLKSEL_DSP_IF		(1 << 5)
-#define RVII_SYNC_DSP			(0 << 7)
-#define RVII_CLKSEL_IVA			(1 << 8)
-#define RVII_SYNC_IVA			(0 << 13)
-#define RVII_CM_CLKSEL_DSP_VAL		RVII_SYNC_IVA | RVII_CLKSEL_IVA | RVII_SYNC_DSP | \
-					RVII_CLKSEL_DSP_IF | RVII_CLKSEL_DSP
-
-#define RVII_CLKSEL_GFX			(1 << 0)
-#define RVII_CM_CLKSEL_GFX_VAL		RVII_CLKSEL_GFX
-
-/*-------------------------------------------------------------------------
- * 2430 Target modes: Along with each configuration the CPU has several
- * modes which goes along with them. Modes mainly are the addition of
- * describe DPLL combinations to go along with a ratio.
- *-------------------------------------------------------------------------*/
-
-/* Hardware governed */
-#define MX_48M_SRC			(0 << 3)
-#define MX_54M_SRC			(0 << 5)
-#define MX_APLLS_CLIKIN_12		(3 << 23)
-#define MX_APLLS_CLIKIN_13		(2 << 23)
-#define MX_APLLS_CLIKIN_19_2		(0 << 23)
-
-/*
- * 2430 - standalone, 2*ref*M/(n+1), M/N is for exactness not relock speed
- * #2	(ratio1) baseport-target
- * #5a	(ratio1) baseport-target, target DPLL = 266*2 = 532MHz
- */
-#define M5A_DPLL_MULT_12		(133 << 12)
-#define M5A_DPLL_DIV_12			(5 << 8)
-#define M5A_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M5A_DPLL_DIV_12 | M5A_DPLL_MULT_12 | \
-					MX_APLLS_CLIKIN_12
-#define M5A_DPLL_MULT_13		(266 << 12)
-#define M5A_DPLL_DIV_13			(12 << 8)
-#define M5A_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M5A_DPLL_DIV_13 | M5A_DPLL_MULT_13 | \
-					MX_APLLS_CLIKIN_13
-#define M5A_DPLL_MULT_19		(180 << 12)
-#define M5A_DPLL_DIV_19			(12 << 8)
-#define M5A_CM_CLKSEL1_PLL_19_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M5A_DPLL_DIV_19 | M5A_DPLL_MULT_19 | \
-					MX_APLLS_CLIKIN_19_2
-/* #5b	(ratio1) target DPLL = 200*2 = 400MHz */
-#define M5B_DPLL_MULT_12		(50 << 12)
-#define M5B_DPLL_DIV_12			(2 << 8)
-#define M5B_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M5B_DPLL_DIV_12 | M5B_DPLL_MULT_12 | \
-					MX_APLLS_CLIKIN_12
-#define M5B_DPLL_MULT_13		(200 << 12)
-#define M5B_DPLL_DIV_13			(12 << 8)
-
-#define M5B_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M5B_DPLL_DIV_13 | M5B_DPLL_MULT_13 | \
-					MX_APLLS_CLIKIN_13
-#define M5B_DPLL_MULT_19		(125 << 12)
-#define M5B_DPLL_DIV_19			(31 << 8)
-#define M5B_CM_CLKSEL1_PLL_19_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M5B_DPLL_DIV_19 | M5B_DPLL_MULT_19 | \
-					MX_APLLS_CLIKIN_19_2
-/*
- * #4	(ratio2)
- * #3	(ratio2) baseport-target, target DPLL = 330*2 = 660MHz
- */
-#define M3_DPLL_MULT_12			(55 << 12)
-#define M3_DPLL_DIV_12			(1 << 8)
-#define M3_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M3_DPLL_DIV_12 | M3_DPLL_MULT_12 | \
-					MX_APLLS_CLIKIN_12
-#define M3_DPLL_MULT_13			(330 << 12)
-#define M3_DPLL_DIV_13			(12 << 8)
-#define M3_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M3_DPLL_DIV_13 | M3_DPLL_MULT_13 | \
-					MX_APLLS_CLIKIN_13
-#define M3_DPLL_MULT_19			(275 << 12)
-#define M3_DPLL_DIV_19			(15 << 8)
-#define M3_CM_CLKSEL1_PLL_19_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M3_DPLL_DIV_19 | M3_DPLL_MULT_19 | \
-					MX_APLLS_CLIKIN_19_2
-/* boot (boot) */
-#define MB_DPLL_MULT			(1 << 12)
-#define MB_DPLL_DIV			(0 << 8)
-#define MB_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\
-					MB_DPLL_MULT | MX_APLLS_CLIKIN_12
-
-#define MB_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\
-					MB_DPLL_MULT | MX_APLLS_CLIKIN_13
-
-#define MB_CM_CLKSEL1_PLL_19_VAL	MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\
-					MB_DPLL_MULT | MX_APLLS_CLIKIN_19
-
-/*
- * 2430 - chassis (sedna)
- * 165 (ratio1) same as above #2
- * 150 (ratio1)
- * 133 (ratio2) same as above #4
- * 110 (ratio2) same as above #3
- * 104 (ratio2)
- * boot (boot)
- */
-
-/*
- * 2420 Equivalent - mode registers
- * PRCM II , target DPLL = 2*300MHz = 600MHz
- */
-#define MII_DPLL_MULT_12		(50 << 12)
-#define MII_DPLL_DIV_12			(1 << 8)
-#define MII_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
-					MII_DPLL_DIV_12 | MII_DPLL_MULT_12 | \
-					MX_APLLS_CLIKIN_12
-#define MII_DPLL_MULT_13		(300 << 12)
-#define MII_DPLL_DIV_13			(12 << 8)
-#define MII_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
-					MII_DPLL_DIV_13 | MII_DPLL_MULT_13 | \
-					MX_APLLS_CLIKIN_13
-
-/* PRCM III target DPLL = 2*266 = 532MHz*/
-#define MIII_DPLL_MULT_12		(133 << 12)
-#define MIII_DPLL_DIV_12		(5 << 8)
-#define MIII_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
-					MIII_DPLL_DIV_12 | MIII_DPLL_MULT_12 | \
-					MX_APLLS_CLIKIN_12
-#define MIII_DPLL_MULT_13		(266 << 12)
-#define MIII_DPLL_DIV_13		(12 << 8)
-#define MIII_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
-					MIII_DPLL_DIV_13 | MIII_DPLL_MULT_13 | \
-					MX_APLLS_CLIKIN_13
-
-/* PRCM VII (boot bypass) */
-#define MVII_CM_CLKSEL1_PLL_12_VAL	MB_CM_CLKSEL1_PLL_12_VAL
-#define MVII_CM_CLKSEL1_PLL_13_VAL	MB_CM_CLKSEL1_PLL_13_VAL
-
-/* High and low operation value */
-#define MX_CLKSEL2_PLL_2x_VAL		(2 << 0)
-#define MX_CLKSEL2_PLL_1x_VAL		(1 << 0)
-
-/*
- * These represent optimal values for common parts, it won't work for all.
- * As long as you scale down, most parameters are still work, they just
- * become sub-optimal. The RFR value goes in the opposite direction. If you
- * don't adjust it down as your clock period increases the refresh interval
- * will not be met. Setting all parameters for complete worst case may work,
- * but may cut memory performance by 2x. Due to errata the DLLs need to be
- * unlocked and their value needs run time calibration.	A dynamic call is
- * need for that as no single right value exists acorss production samples.
- *
- * Only the FULL speed values are given. Current code is such that rate
- * changes must be made at DPLLoutx2. The actual value adjustment for low
- * frequency operation will be handled by omap_set_performance()
- *
- * By having the boot loader boot up in the fastest L4 speed available likely
- * will result in something which you can switch between.
- */
-#define V24XX_SDRC_RFR_CTRL_133MHz	(0x0003de00 | 1)
-#define V24XX_SDRC_RFR_CTRL_100MHz	(0x0002da01 | 1)
-#define V24XX_SDRC_RFR_CTRL_110MHz	(0x0002da01 | 1) /* Need to calc */
-#define V24XX_SDRC_RFR_CTRL_BYPASS	(0x00005000 | 1) /* Need to calc */
-
-/* MPU speed defines */
-#define S12M	12000000
-#define S13M	13000000
-#define S19M	19200000
-#define S26M	26000000
-#define S100M	100000000
-#define S133M	133000000
-#define S150M	150000000
-#define S165M	165000000
-#define S200M	200000000
-#define S266M	266000000
-#define S300M	300000000
-#define S330M	330000000
-#define S400M	400000000
-#define S532M	532000000
-#define S600M	600000000
-#define S660M	660000000
-
-/*-------------------------------------------------------------------------
- * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
- * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,
- * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL,
- * CM_CLKSEL2_PLL, CM_CLKSEL_MDM
- *
- * Filling in table based on H4 boards and 2430-SDPs variants available.
- * There are quite a few more rates combinations which could be defined.
- *
- * When multiple values are defined the start up will try and choose the
- * fastest one. If a 'fast' value is defined, then automatically, the /2
- * one should be included as it can be used.	Generally having more that
- * one fast set does not make sense, as static timings need to be changed
- * to change the set.	 The exception is the bypass setting which is
- * availble for low power bypass.
- *
- * Note: This table needs to be sorted, fastest to slowest.
- *-------------------------------------------------------------------------*/
-static struct prcm_config rate_table[] = {
-	/* PRCM II - FAST */
-	{S12M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL,		/* 300MHz ARM */
-		RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
-		RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz,
-		RATE_IN_242X},
-
-	{S13M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL,		/* 300MHz ARM */
-		RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
-		RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz,
-		RATE_IN_242X},
-
-	/* PRCM III - FAST */
-	{S12M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL,		/* 266MHz ARM */
-		RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
-		RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz,
-		RATE_IN_242X},
-
-	{S13M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL,		/* 266MHz ARM */
-		RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
-		RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz,
-		RATE_IN_242X},
-
-	/* PRCM II - SLOW */
-	{S12M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL,		/* 150MHz ARM */
-		RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
-		RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz,
-		RATE_IN_242X},
-
-	{S13M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL,		/* 150MHz ARM */
-		RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
-		RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz,
-		RATE_IN_242X},
-
-	/* PRCM III - SLOW */
-	{S12M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL,		/* 133MHz ARM */
-		RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
-		RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz,
-		RATE_IN_242X},
-
-	{S13M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL,		/* 133MHz ARM */
-		RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
-		RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz,
-		RATE_IN_242X},
-
-	/* PRCM-VII (boot-bypass) */
-	{S12M, S12M, S12M, RVII_CM_CLKSEL_MPU_VAL,		/* 12MHz ARM*/
-		RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL,
-		RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_12_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_BYPASS,
-		RATE_IN_242X},
-
-	/* PRCM-VII (boot-bypass) */
-	{S13M, S13M, S13M, RVII_CM_CLKSEL_MPU_VAL,		/* 13MHz ARM */
-		RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL,
-		RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_BYPASS,
-		RATE_IN_242X},
-
-	/* PRCM #3 - ratio2 (ES2) - FAST */
-	{S13M, S660M, S330M, R2_CM_CLKSEL_MPU_VAL,		/* 330MHz ARM */
-		R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
-		R2_CM_CLKSEL1_CORE_VAL, M3_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, R2_CM_CLKSEL_MDM_VAL,
-		V24XX_SDRC_RFR_CTRL_110MHz,
-		RATE_IN_243X},
-
-	/* PRCM #5a - ratio1 - FAST */
-	{S13M, S532M, S266M, R1_CM_CLKSEL_MPU_VAL,		/* 266MHz ARM */
-		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
-		R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
-		V24XX_SDRC_RFR_CTRL_133MHz,
-		RATE_IN_243X},
-
-	/* PRCM #5b - ratio1 - FAST */
-	{S13M, S400M, S200M, R1_CM_CLKSEL_MPU_VAL,		/* 200MHz ARM */
-		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
-		R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
-		V24XX_SDRC_RFR_CTRL_100MHz,
-		RATE_IN_243X},
-
-	/* PRCM #3 - ratio2 (ES2) - SLOW */
-	{S13M, S330M, S165M, R2_CM_CLKSEL_MPU_VAL,		/* 165MHz ARM */
-		R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
-		R2_CM_CLKSEL1_CORE_VAL, M3_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_1x_VAL, R2_CM_CLKSEL_MDM_VAL,
-		V24XX_SDRC_RFR_CTRL_110MHz,
-		RATE_IN_243X},
-
-	/* PRCM #5a - ratio1 - SLOW */
-	{S13M, S266M, S133M, R1_CM_CLKSEL_MPU_VAL,		/* 133MHz ARM */
-		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
-		R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
-		V24XX_SDRC_RFR_CTRL_133MHz,
-		RATE_IN_243X},
-
-	/* PRCM #5b - ratio1 - SLOW*/
-	{S13M, S200M, S100M, R1_CM_CLKSEL_MPU_VAL,		/* 100MHz ARM */
-		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
-		R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
-		V24XX_SDRC_RFR_CTRL_100MHz,
-		RATE_IN_243X},
-
-	/* PRCM-boot/bypass */
-	{S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL,		/* 13Mhz */
-		RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
-		RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
-		V24XX_SDRC_RFR_CTRL_BYPASS,
-		RATE_IN_243X},
-
-	/* PRCM-boot/bypass */
-	{S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL,		/* 12Mhz */
-		RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
-		RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_12_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
-		V24XX_SDRC_RFR_CTRL_BYPASS,
-		RATE_IN_243X},
-
-	{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
-};
-
-/*-------------------------------------------------------------------------
- * 24xx clock tree.
- *
- * NOTE:In many cases here we are assigning a 'default' parent.	In many
- *	cases the parent is selectable.	The get/set parent calls will also
- *	switch sources.
- *
- *	Many some clocks say always_enabled, but they can be auto idled for
- *	power savings. They will always be available upon clock request.
- *
- *	Several sources are given initial rates which may be wrong, this will
- *	be fixed up in the init func.
- *
- *	Things are broadly separated below by clock domains. It is
- *	noteworthy that most periferals have dependencies on multiple clock
- *	domains. Many get their interface clocks from the L4 domain, but get
- *	functional clocks from fixed sources or other core domain derived
- *	clocks.
- *-------------------------------------------------------------------------*/
-
-/* Base external input clocks */
-static struct clk func_32k_ck = {
-	.name		= "func_32k_ck",
-	.rate		= 32000,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_FIXED | ALWAYS_ENABLED,
-};
-
-/* Typical 12/13MHz in standalone mode, will be 26Mhz in chassis mode */
-static struct clk osc_ck = {		/* (*12, *13, 19.2, *26, 38.4)MHz */
-	.name		= "osc_ck",
-	.rate		= 26000000,		/* fixed up in clock init */
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_FIXED | RATE_PROPAGATES,
-};
-
-/* With out modem likely 12MHz, with modem likely 13MHz */
-static struct clk sys_ck = {		/* (*12, *13, 19.2, 26, 38.4)MHz */
-	.name		= "sys_ck",		/* ~ ref_clk also */
-	.parent		= &osc_ck,
-	.rate		= 13000000,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES,
-	.rate_offset	= 6, /* sysclkdiv 1 or 2, already handled or no boot */
-	.recalc		= &omap2_sys_clk_recalc,
-};
-
-static struct clk alt_ck = {		/* Typical 54M or 48M, may not exist */
-	.name		= "alt_ck",
-	.rate		= 54000000,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES,
-	.recalc		= &omap2_propagate_rate,
-};
-
-/*
- * Analog domain root source clocks
- */
-
-/* dpll_ck, is broken out in to special cases through clksel */
-static struct clk dpll_ck = {
-	.name		= "dpll_ck",
-	.parent		= &sys_ck,		/* Can be func_32k also */
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_PROPAGATES | RATE_CKCTL | CM_PLL_SEL1,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk apll96_ck = {
-	.name		= "apll96_ck",
-	.parent		= &sys_ck,
-	.rate		= 96000000,
-	.flags		= CLOCK_IN_OMAP242X |CLOCK_IN_OMAP243X |
-				RATE_FIXED | RATE_PROPAGATES,
-	.enable_reg	= (void __iomem *)&CM_CLKEN_PLL,
-	.enable_bit	= 0x2,
-	.recalc		= &omap2_propagate_rate,
-};
-
-static struct clk apll54_ck = {
-	.name		= "apll54_ck",
-	.parent		= &sys_ck,
-	.rate		= 54000000,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_FIXED | RATE_PROPAGATES,
-	.enable_reg	= (void __iomem *)&CM_CLKEN_PLL,
-	.enable_bit	= 0x6,
-	.recalc		= &omap2_propagate_rate,
-};
+int omap2_clk_enable(struct clk *clk);
+void omap2_clk_disable(struct clk *clk);
+long omap2_clk_round_rate(struct clk *clk, unsigned long rate);
+int omap2_clk_set_rate(struct clk *clk, unsigned long rate);
+int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent);
 
-/*
- * PRCM digital base sources
- */
-static struct clk func_54m_ck = {
-	.name		= "func_54m_ck",
-	.parent		= &apll54_ck,	/* can also be alt_clk */
-	.rate		= 54000000,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_FIXED | CM_PLL_SEL1 | RATE_PROPAGATES,
-	.src_offset	= 5,
-	.enable_reg	= (void __iomem *)&CM_CLKEN_PLL,
-	.enable_bit	= 0xff,
-	.recalc		= &omap2_propagate_rate,
-};
-
-static struct clk core_ck = {
-	.name		= "core_ck",
-	.parent		= &dpll_ck,		/* can also be 32k */
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				ALWAYS_ENABLED | RATE_PROPAGATES,
-	.recalc		= &omap2_propagate_rate,
-};
-
-static struct clk sleep_ck = {		/* sys_clk or 32k */
-	.name		= "sleep_ck",
-	.parent		= &func_32k_ck,
-	.rate		= 32000,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.recalc		= &omap2_propagate_rate,
-};
-
-static struct clk func_96m_ck = {
-	.name		= "func_96m_ck",
-	.parent		= &apll96_ck,
-	.rate		= 96000000,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_FIXED | RATE_PROPAGATES,
-	.enable_reg	= (void __iomem *)&CM_CLKEN_PLL,
-	.enable_bit	= 0xff,
-	.recalc		= &omap2_propagate_rate,
-};
-
-static struct clk func_48m_ck = {
-	.name		= "func_48m_ck",
-	.parent		= &apll96_ck,	 /* 96M or Alt */
-	.rate		= 48000000,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_FIXED | CM_PLL_SEL1 | RATE_PROPAGATES,
-	.src_offset	= 3,
-	.enable_reg	= (void __iomem *)&CM_CLKEN_PLL,
-	.enable_bit	= 0xff,
-	.recalc		= &omap2_propagate_rate,
-};
-
-static struct clk func_12m_ck = {
-	.name		= "func_12m_ck",
-	.parent		= &func_48m_ck,
-	.rate		= 12000000,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_FIXED | RATE_PROPAGATES,
-	.recalc		= &omap2_propagate_rate,
-	.enable_reg	= (void __iomem *)&CM_CLKEN_PLL,
-	.enable_bit	= 0xff,
-};
-
-/* Secure timer, only available in secure mode */
-static struct clk wdt1_osc_ck = {
-	.name		= "ck_wdt1_osc",
-	.parent		= &osc_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk sys_clkout = {
-	.name		= "sys_clkout",
-	.parent		= &func_54m_ck,
-	.rate		= 54000000,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				CM_SYSCLKOUT_SEL1 | RATE_CKCTL,
-	.src_offset	= 0,
-	.enable_reg	= (void __iomem *)&PRCM_CLKOUT_CTRL,
-	.enable_bit	= 7,
-	.rate_offset	= 3,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* In 2430, new in 2420 ES2 */
-static struct clk sys_clkout2 = {
-	.name		= "sys_clkout2",
-	.parent		= &func_54m_ck,
-	.rate		= 54000000,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				CM_SYSCLKOUT_SEL1 | RATE_CKCTL,
-	.src_offset	= 8,
-	.enable_reg	= (void __iomem *)&PRCM_CLKOUT_CTRL,
-	.enable_bit	= 15,
-	.rate_offset	= 11,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk emul_ck = {
-	.name		= "emul_ck",
-	.parent		= &func_54m_ck,
-	.flags		= CLOCK_IN_OMAP242X,
-	.enable_reg	= (void __iomem *)&PRCM_CLKEMUL_CTRL,
-	.enable_bit	= 0,
-	.recalc		= &omap2_propagate_rate,
-
-};
-
-/*
- * MPU clock domain
- *	Clocks:
- *		MPU_FCLK, MPU_ICLK
- *		INT_M_FCLK, INT_M_I_CLK
- *
- * - Individual clocks are hardware managed.
- * - Base divider comes from: CM_CLKSEL_MPU
- *
- */
-static struct clk mpu_ck = {	/* Control cpu */
-	.name		= "mpu_ck",
-	.parent		= &core_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_CKCTL |
-				ALWAYS_ENABLED | CM_MPU_SEL1 | DELAYED_APP |
-				CONFIG_PARTICIPANT | RATE_PROPAGATES,
-	.rate_offset	= 0,	/* bits 0-4 */
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/*
- * DSP (2430-IVA2.1) (2420-UMA+IVA1) clock domain
- * Clocks:
- *	2430: IVA2.1_FCLK, IVA2.1_ICLK
- *	2420: UMA_FCLK, UMA_ICLK, IVA_MPU, IVA_COP
- */
-static struct clk iva2_1_fck = {
-	.name		= "iva2_1_fck",
-	.parent		= &core_ck,
-	.flags		= CLOCK_IN_OMAP243X | RATE_CKCTL | CM_DSP_SEL1 |
-				DELAYED_APP | RATE_PROPAGATES |
-				CONFIG_PARTICIPANT,
-	.rate_offset	= 0,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN_DSP,
-	.enable_bit	= 0,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk iva2_1_ick = {
-	.name		= "iva2_1_ick",
-	.parent		= &iva2_1_fck,
-	.flags		= CLOCK_IN_OMAP243X | RATE_CKCTL | CM_DSP_SEL1 |
-				DELAYED_APP | CONFIG_PARTICIPANT,
-	.rate_offset	= 5,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/*
- * Won't be too specific here. The core clock comes into this block
- * it is divided then tee'ed. One branch goes directly to xyz enable
- * controls. The other branch gets further divided by 2 then possibly
- * routed into a synchronizer and out of clocks abc.
- */
-static struct clk dsp_fck = {
-	.name		= "dsp_fck",
-	.parent		= &core_ck,
-	.flags		= CLOCK_IN_OMAP242X | RATE_CKCTL | CM_DSP_SEL1 |
-			DELAYED_APP | CONFIG_PARTICIPANT | RATE_PROPAGATES,
-	.rate_offset	= 0,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN_DSP,
-	.enable_bit	= 0,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk dsp_ick = {
-	.name		= "dsp_ick",	 /* apparently ipi and isp */
-	.parent		= &dsp_fck,
-	.flags		= CLOCK_IN_OMAP242X | RATE_CKCTL | CM_DSP_SEL1 |
-				DELAYED_APP | CONFIG_PARTICIPANT,
-	.rate_offset = 5,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN_DSP,
-	.enable_bit	= 1,		/* for ipi */
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk iva1_ifck = {
-	.name		= "iva1_ifck",
-	.parent		= &core_ck,
-	.flags		= CLOCK_IN_OMAP242X | CM_DSP_SEL1 | RATE_CKCTL |
-			CONFIG_PARTICIPANT | RATE_PROPAGATES | DELAYED_APP,
-	.rate_offset= 8,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN_DSP,
-	.enable_bit	= 10,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* IVA1 mpu/int/i/f clocks are /2 of parent */
-static struct clk iva1_mpu_int_ifck = {
-	.name		= "iva1_mpu_int_ifck",
-	.parent		= &iva1_ifck,
-	.flags		= CLOCK_IN_OMAP242X | RATE_CKCTL | CM_DSP_SEL1,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN_DSP,
-	.enable_bit	= 8,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/*
- * L3 clock domain
- * L3 clocks are used for both interface and functional clocks to
- * multiple entities. Some of these clocks are completely managed
- * by hardware, and some others allow software control. Hardware
- * managed ones general are based on directly CLK_REQ signals and
- * various auto idle settings. The functional spec sets many of these
- * as 'tie-high' for their enables.
- *
- * I-CLOCKS:
- *	L3-Interconnect, SMS, GPMC, SDRC, OCM_RAM, OCM_ROM, SDMA
- *	CAM, HS-USB.
- * F-CLOCK
- *	SSI.
- *
- * GPMC memories and SDRC have timing and clock sensitive registers which
- * may very well need notification when the clock changes. Currently for low
- * operating points, these are taken care of in sleep.S.
- */
-static struct clk core_l3_ck = {	/* Used for ick and fck, interconnect */
-	.name		= "core_l3_ck",
-	.parent		= &core_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_CKCTL | ALWAYS_ENABLED | CM_CORE_SEL1 |
-				DELAYED_APP | CONFIG_PARTICIPANT |
-				RATE_PROPAGATES,
-	.rate_offset	= 0,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk usb_l4_ick = {	/* FS-USB interface clock */
-	.name		= "usb_l4_ick",
-	.parent		= &core_l3_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_CKCTL | CM_CORE_SEL1 | DELAYED_APP |
-				CONFIG_PARTICIPANT,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
-	.enable_bit	= 0,
-	.rate_offset = 25,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/*
- * SSI is in L3 management domain, its direct parent is core not l3,
- * many core power domain entities are grouped into the L3 clock
- * domain.
- * SSI_SSR_FCLK, SSI_SST_FCLK, SSI_L4_CLIK
- *
- * ssr = core/1/2/3/4/5, sst = 1/2 ssr.
- */
-static struct clk ssi_ssr_sst_fck = {
-	.name		= "ssi_fck",
-	.parent		= &core_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_CKCTL | CM_CORE_SEL1 | DELAYED_APP,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,	/* bit 1 */
-	.enable_bit	= 1,
-	.rate_offset = 20,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/*
- * GFX clock domain
- *	Clocks:
- * GFX_FCLK, GFX_ICLK
- * GFX_CG1(2d), GFX_CG2(3d)
- *
- * GFX_FCLK runs from L3, and is divided by (1,2,3,4)
- * The 2d and 3d clocks run at a hardware determined
- * divided value of fclk.
- *
- */
-static struct clk gfx_3d_fck = {
-	.name		= "gfx_3d_fck",
-	.parent		= &core_l3_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_CKCTL | CM_GFX_SEL1,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN_GFX,
-	.enable_bit	= 2,
-	.rate_offset= 0,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gfx_2d_fck = {
-	.name		= "gfx_2d_fck",
-	.parent		= &core_l3_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_CKCTL | CM_GFX_SEL1,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN_GFX,
-	.enable_bit	= 1,
-	.rate_offset= 0,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gfx_ick = {
-	.name		= "gfx_ick",		/* From l3 */
-	.parent		= &core_l3_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_CKCTL,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN_GFX,	/* bit 0 */
-	.enable_bit	= 0,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-/*
- * Modem clock domain (2430)
- *	CLOCKS:
- *		MDM_OSC_CLK
- *		MDM_ICLK
- */
-static struct clk mdm_ick = {		/* used both as a ick and fck */
-	.name		= "mdm_ick",
-	.parent		= &core_ck,
-	.flags		= CLOCK_IN_OMAP243X | RATE_CKCTL | CM_MODEM_SEL1 |
-				DELAYED_APP | CONFIG_PARTICIPANT,
-	.rate_offset	= 0,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN_MDM,
-	.enable_bit	= 0,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk mdm_osc_ck = {
-	.name		= "mdm_osc_ck",
-	.rate		= 26000000,
-	.parent		= &osc_ck,
-	.flags		= CLOCK_IN_OMAP243X | RATE_FIXED,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN_MDM,
-	.enable_bit	= 1,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-/*
- * L4 clock management domain
- *
- * This domain contains lots of interface clocks from the L4 interface, some
- * functional clocks.	Fixed APLL functional source clocks are managed in
- * this domain.
- */
-static struct clk l4_ck = {		/* used both as an ick and fck */
-	.name		= "l4_ck",
-	.parent		= &core_l3_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_CKCTL | ALWAYS_ENABLED | CM_CORE_SEL1 |
-				DELAYED_APP | RATE_PROPAGATES,
-	.rate_offset	= 5,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk ssi_l4_ick = {
-	.name		= "ssi_l4_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_CKCTL,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,	/* bit 1 */
-	.enable_bit	= 1,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-/*
- * DSS clock domain
- * CLOCKs:
- * DSS_L4_ICLK, DSS_L3_ICLK,
- * DSS_CLK1, DSS_CLK2, DSS_54MHz_CLK
- *
- * DSS is both initiator and target.
- */
-static struct clk dss_ick = {		/* Enables both L3,L4 ICLK's */
-	.name		= "dss_ick",
-	.parent		= &l4_ck,	/* really both l3 and l4 */
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_CKCTL,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 0,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk dss1_fck = {
-	.name		= "dss1_fck",
-	.parent		= &core_ck,		/* Core or sys */
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_CKCTL | CM_CORE_SEL1 | DELAYED_APP,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 0,
-	.rate_offset	= 8,
-	.src_offset	= 8,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk dss2_fck = {		/* Alt clk used in power management */
-	.name		= "dss2_fck",
-	.parent		= &sys_ck,		/* fixed at sys_ck or 48MHz */
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_CKCTL | CM_CORE_SEL1 | RATE_FIXED |
-				DELAYED_APP,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 1,
-	.src_offset	= 13,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk dss_54m_fck = {	/* Alt clk used in power management */
-	.name		= "dss_54m_fck",	/* 54m tv clk */
-	.parent		= &func_54m_ck,
-	.rate		= 54000000,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_FIXED | RATE_PROPAGATES,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 2,
-	.recalc		= &omap2_propagate_rate,
-};
-
-/*
- * CORE power domain ICLK & FCLK defines.
- * Many of the these can have more than one possible parent. Entries
- * here will likely have an L4 interface parent, and may have multiple
- * functional clock parents.
- */
-static struct clk gpt1_ick = {
-	.name		= "gpt1_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN_WKUP,	/* Bit0 */
-	.enable_bit	= 0,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt1_fck = {
-	.name		= "gpt1_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				CM_WKUP_SEL1,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN_WKUP,	/* Bit0 */
-	.enable_bit	= 0,
-	.src_offset	= 0,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt2_ick = {
-	.name		= "gpt2_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,	/* Bit4 */
-	.enable_bit	= 4,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt2_fck = {
-	.name		= "gpt2_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				CM_CORE_SEL2,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 4,
-	.src_offset	= 2,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt3_ick = {
-	.name		= "gpt3_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,	/* Bit5 */
-	.enable_bit	= 5,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt3_fck = {
-	.name		= "gpt3_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				CM_CORE_SEL2,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 5,
-	.src_offset	= 4,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt4_ick = {
-	.name		= "gpt4_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,	/* Bit6 */
-	.enable_bit	= 6,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt4_fck = {
-	.name		= "gpt4_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				CM_CORE_SEL2,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 6,
-	.src_offset	= 6,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt5_ick = {
-	.name		= "gpt5_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,	 /* Bit7 */
-	.enable_bit	= 7,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt5_fck = {
-	.name		= "gpt5_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				CM_CORE_SEL2,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 7,
-	.src_offset	= 8,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt6_ick = {
-	.name		= "gpt6_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_bit	= 8,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,	 /* bit8 */
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt6_fck = {
-	.name		= "gpt6_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				CM_CORE_SEL2,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 8,
-	.src_offset	= 10,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt7_ick = {
-	.name		= "gpt7_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,	 /* bit9 */
-	.enable_bit	= 9,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt7_fck = {
-	.name		= "gpt7_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				CM_CORE_SEL2,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 9,
-	.src_offset	= 12,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt8_ick = {
-	.name		= "gpt8_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,	 /* bit10 */
-	.enable_bit	= 10,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt8_fck = {
-	.name		= "gpt8_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				CM_CORE_SEL2,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 10,
-	.src_offset	= 14,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt9_ick = {
-	.name		= "gpt9_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 11,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt9_fck = {
-	.name		= "gpt9_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-					CM_CORE_SEL2,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 11,
-	.src_offset	= 16,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt10_ick = {
-	.name		= "gpt10_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 12,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt10_fck = {
-	.name		= "gpt10_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-					CM_CORE_SEL2,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 12,
-	.src_offset	= 18,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt11_ick = {
-	.name		= "gpt11_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 13,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt11_fck = {
-	.name		= "gpt11_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-					CM_CORE_SEL2,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 13,
-	.src_offset	= 20,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt12_ick = {
-	.name		= "gpt12_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,	 /* bit14 */
-	.enable_bit	= 14,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt12_fck = {
-	.name		= "gpt12_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-					CM_CORE_SEL2,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 14,
-	.src_offset	= 22,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcbsp1_ick = {
-	.name		= "mcbsp1_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_bit	= 15,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,	 /* bit16 */
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcbsp1_fck = {
-	.name		= "mcbsp1_fck",
-	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_bit	= 15,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcbsp2_ick = {
-	.name		= "mcbsp2_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_bit	= 16,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcbsp2_fck = {
-	.name		= "mcbsp2_fck",
-	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_bit	= 16,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcbsp3_ick = {
-	.name		= "mcbsp3_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
-	.enable_bit	= 3,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcbsp3_fck = {
-	.name		= "mcbsp3_fck",
-	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
-	.enable_bit	= 3,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcbsp4_ick = {
-	.name		= "mcbsp4_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
-	.enable_bit	= 4,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcbsp4_fck = {
-	.name		= "mcbsp4_fck",
-	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
-	.enable_bit	= 4,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcbsp5_ick = {
-	.name		= "mcbsp5_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
-	.enable_bit	= 5,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcbsp5_fck = {
-	.name		= "mcbsp5_fck",
-	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
-	.enable_bit	= 5,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcspi1_ick = {
-	.name		= "mcspi_ick",
-	.id		= 1,
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 17,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcspi1_fck = {
-	.name		= "mcspi_fck",
-	.id		= 1,
-	.parent		= &func_48m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 17,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcspi2_ick = {
-	.name		= "mcspi_ick",
-	.id		= 2,
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 18,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcspi2_fck = {
-	.name		= "mcspi_fck",
-	.id		= 2,
-	.parent		= &func_48m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 18,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcspi3_ick = {
-	.name		= "mcspi_ick",
-	.id		= 3,
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
-	.enable_bit	= 9,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcspi3_fck = {
-	.name		= "mcspi_fck",
-	.id		= 3,
-	.parent		= &func_48m_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
-	.enable_bit	= 9,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk uart1_ick = {
-	.name		= "uart1_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 21,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk uart1_fck = {
-	.name		= "uart1_fck",
-	.parent		= &func_48m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 21,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk uart2_ick = {
-	.name		= "uart2_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 22,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk uart2_fck = {
-	.name		= "uart2_fck",
-	.parent		= &func_48m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 22,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk uart3_ick = {
-	.name		= "uart3_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
-	.enable_bit	= 2,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk uart3_fck = {
-	.name		= "uart3_fck",
-	.parent		= &func_48m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
-	.enable_bit	= 2,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpios_ick = {
-	.name		= "gpios_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN_WKUP,
-	.enable_bit	= 2,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpios_fck = {
-	.name		= "gpios_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN_WKUP,
-	.enable_bit	= 2,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mpu_wdt_ick = {
-	.name		= "mpu_wdt_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN_WKUP,
-	.enable_bit	= 3,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mpu_wdt_fck = {
-	.name		= "mpu_wdt_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN_WKUP,
-	.enable_bit	= 3,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk sync_32k_ick = {
-	.name		= "sync_32k_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN_WKUP,
-	.enable_bit	= 1,
-	.recalc		= &omap2_followparent_recalc,
-};
-static struct clk wdt1_ick = {
-	.name		= "wdt1_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN_WKUP,
-	.enable_bit	= 4,
-	.recalc		= &omap2_followparent_recalc,
-};
-static struct clk omapctrl_ick = {
-	.name		= "omapctrl_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN_WKUP,
-	.enable_bit	= 5,
-	.recalc		= &omap2_followparent_recalc,
-};
-static struct clk icr_ick = {
-	.name		= "icr_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN_WKUP,
-	.enable_bit	= 6,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk cam_ick = {
-	.name		= "cam_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 31,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk cam_fck = {
-	.name		= "cam_fck",
-	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 31,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mailboxes_ick = {
-	.name		= "mailboxes_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 30,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk wdt4_ick = {
-	.name		= "wdt4_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 29,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk wdt4_fck = {
-	.name		= "wdt4_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 29,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk wdt3_ick = {
-	.name		= "wdt3_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 28,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk wdt3_fck = {
-	.name		= "wdt3_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 28,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mspro_ick = {
-	.name		= "mspro_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 27,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mspro_fck = {
-	.name		= "mspro_fck",
-	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 27,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mmc_ick = {
-	.name		= "mmc_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 26,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mmc_fck = {
-	.name		= "mmc_fck",
-	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP242X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 26,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk fac_ick = {
-	.name		= "fac_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 25,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk fac_fck = {
-	.name		= "fac_fck",
-	.parent		= &func_12m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 25,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk eac_ick = {
-	.name		= "eac_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 24,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk eac_fck = {
-	.name		= "eac_fck",
-	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP242X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 24,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk hdq_ick = {
-	.name		= "hdq_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 23,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk hdq_fck = {
-	.name		= "hdq_fck",
-	.parent		= &func_12m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 23,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk i2c2_ick = {
-	.name		= "i2c_ick",
-	.id		= 2,
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 20,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk i2c2_fck = {
-	.name		= "i2c_fck",
-	.id		= 2,
-	.parent		= &func_12m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 20,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk i2chs2_fck = {
-	.name		= "i2chs2_fck",
-	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
-	.enable_bit	= 20,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk i2c1_ick = {
-	.name		= "i2c_ick",
-	.id		= 1,
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 19,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk i2c1_fck = {
-	.name		= "i2c_fck",
-	.id		= 1,
-	.parent		= &func_12m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 19,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk i2chs1_fck = {
-	.name		= "i2chs1_fck",
-	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
-	.enable_bit	= 19,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk vlynq_ick = {
-	.name		= "vlynq_ick",
-	.parent		= &core_l3_ck,
-	.flags		= CLOCK_IN_OMAP242X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 3,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk vlynq_fck = {
-	.name		= "vlynq_fck",
-	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP242X  | RATE_CKCTL | CM_CORE_SEL1 | DELAYED_APP,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 3,
-	.src_offset	= 15,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk sdrc_ick = {
-	.name		= "sdrc_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN3_CORE,
-	.enable_bit	= 2,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk des_ick = {
-	.name		= "des_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN4_CORE,
-	.enable_bit	= 0,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk sha_ick = {
-	.name		= "sha_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN4_CORE,
-	.enable_bit	= 1,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk rng_ick = {
-	.name		= "rng_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN4_CORE,
-	.enable_bit	= 2,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk aes_ick = {
-	.name		= "aes_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN4_CORE,
-	.enable_bit	= 3,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk pka_ick = {
-	.name		= "pka_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN4_CORE,
-	.enable_bit	= 4,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk usb_fck = {
-	.name		= "usb_fck",
-	.parent		= &func_48m_ck,
-	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
-	.enable_bit	= 0,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk usbhs_ick = {
-	.name		= "usbhs_ick",
-	.parent		= &core_l3_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
-	.enable_bit	= 6,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mmchs1_ick = {
-	.name		= "mmchs1_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
-	.enable_bit	= 7,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mmchs1_fck = {
-	.name		= "mmchs1_fck",
-	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
-	.enable_bit	= 7,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mmchs2_ick = {
-	.name		= "mmchs2_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
-	.enable_bit	= 8,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mmchs2_fck = {
-	.name		= "mmchs2_fck",
-	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
-	.enable_bit	= 8,
-	.recalc		= &omap2_followparent_recalc,
-};
+#ifdef CONFIG_OMAP_RESET_CLOCKS
+void omap2_clk_disable_unused(struct clk *clk);
+#else
+#define omap2_clk_disable_unused	NULL
+#endif
 
-static struct clk gpio5_ick = {
-	.name		= "gpio5_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
-	.enable_bit	= 10,
-	.recalc		= &omap2_followparent_recalc,
-};
+void omap2_clksel_recalc(struct clk *clk);
+void omap2_init_clksel_parent(struct clk *clk);
+u32 omap2_clksel_get_divisor(struct clk *clk);
+u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
+				u32 *new_div);
+u32 omap2_clksel_to_divisor(struct clk *clk, u32 field_val);
+u32 omap2_divisor_to_clksel(struct clk *clk, u32 div);
+void omap2_fixed_divisor_recalc(struct clk *clk);
+long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate);
+int omap2_clksel_set_rate(struct clk *clk, unsigned long rate);
+u32 omap2_get_dpll_rate(struct clk *clk);
+int omap2_wait_clock_ready(void __iomem *reg, u32 cval, const char *name);
 
-static struct clk gpio5_fck = {
-	.name		= "gpio5_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
-	.enable_bit	= 10,
-	.recalc		= &omap2_followparent_recalc,
-};
+extern u8 cpu_mask;
 
-static struct clk mdm_intc_ick = {
-	.name		= "mdm_intc_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
-	.enable_bit	= 11,
-	.recalc		= &omap2_followparent_recalc,
+/* clksel_rate data common to 24xx/343x */
+static const struct clksel_rate gpt_32k_rates[] = {
+	 { .div = 1, .val = 0, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE },
+	 { .div = 0 }
 };
 
-static struct clk mmchsdb1_fck = {
-	.name		= "mmchsdb1_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
-	.enable_bit	= 16,
-	.recalc		= &omap2_followparent_recalc,
+static const struct clksel_rate gpt_sys_rates[] = {
+	 { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE },
+	 { .div = 0 }
 };
 
-static struct clk mmchsdb2_fck = {
-	.name		= "mmchsdb2_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
-	.enable_bit	= 17,
-	.recalc		= &omap2_followparent_recalc,
+static const struct clksel_rate gfx_l3_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_343X },
+	{ .div = 2, .val = 2, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 3, .val = 3, .flags = RATE_IN_243X | RATE_IN_343X },
+	{ .div = 4, .val = 4, .flags = RATE_IN_243X | RATE_IN_343X },
+	{ .div = 0 }
 };
 
-/*
- * This clock is a composite clock which does entire set changes then
- * forces a rebalance. It keys on the MPU speed, but it really could
- * be any key speed part of a set in the rate table.
- *
- * to really change a set, you need memory table sets which get changed
- * in sram, pre-notifiers & post notifiers, changing the top set, without
- * having low level display recalc's won't work... this is why dpm notifiers
- * work, isr's off, walk a list of clocks already _off_ and not messing with
- * the bus.
- *
- * This clock should have no parent. It embodies the entire upper level
- * active set. A parent will mess up some of the init also.
- */
-static struct clk virt_prcm_set = {
-	.name		= "virt_prcm_set",
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				VIRTUAL_CLOCK | ALWAYS_ENABLED | DELAYED_APP,
-	.parent		= &mpu_ck,	/* Indexed by mpu speed, no parent */
-	.recalc		= &omap2_mpu_recalc,	/* sets are keyed on mpu rate */
-	.set_rate	= &omap2_select_table_rate,
-	.round_rate	= &omap2_round_to_table_rate,
-};
-
-static struct clk *onchip_clks[] = {
-	/* external root sources */
-	&func_32k_ck,
-	&osc_ck,
-	&sys_ck,
-	&alt_ck,
-	/* internal analog sources */
-	&dpll_ck,
-	&apll96_ck,
-	&apll54_ck,
-	/* internal prcm root sources */
-	&func_54m_ck,
-	&core_ck,
-	&sleep_ck,
-	&func_96m_ck,
-	&func_48m_ck,
-	&func_12m_ck,
-	&wdt1_osc_ck,
-	&sys_clkout,
-	&sys_clkout2,
-	&emul_ck,
-	/* mpu domain clocks */
-	&mpu_ck,
-	/* dsp domain clocks */
-	&iva2_1_fck,		/* 2430 */
-	&iva2_1_ick,
-	&dsp_ick,		/* 2420 */
-	&dsp_fck,
-	&iva1_ifck,
-	&iva1_mpu_int_ifck,
-	/* GFX domain clocks */
-	&gfx_3d_fck,
-	&gfx_2d_fck,
-	&gfx_ick,
-	/* Modem domain clocks */
-	&mdm_ick,
-	&mdm_osc_ck,
-	/* DSS domain clocks */
-	&dss_ick,
-	&dss1_fck,
-	&dss2_fck,
-	&dss_54m_fck,
-	/* L3 domain clocks */
-	&core_l3_ck,
-	&ssi_ssr_sst_fck,
-	&usb_l4_ick,
-	/* L4 domain clocks */
-	&l4_ck,			/* used as both core_l4 and wu_l4 */
-	&ssi_l4_ick,
-	/* virtual meta-group clock */
-	&virt_prcm_set,
-	/* general l4 interface ck, multi-parent functional clk */
-	&gpt1_ick,
-	&gpt1_fck,
-	&gpt2_ick,
-	&gpt2_fck,
-	&gpt3_ick,
-	&gpt3_fck,
-	&gpt4_ick,
-	&gpt4_fck,
-	&gpt5_ick,
-	&gpt5_fck,
-	&gpt6_ick,
-	&gpt6_fck,
-	&gpt7_ick,
-	&gpt7_fck,
-	&gpt8_ick,
-	&gpt8_fck,
-	&gpt9_ick,
-	&gpt9_fck,
-	&gpt10_ick,
-	&gpt10_fck,
-	&gpt11_ick,
-	&gpt11_fck,
-	&gpt12_ick,
-	&gpt12_fck,
-	&mcbsp1_ick,
-	&mcbsp1_fck,
-	&mcbsp2_ick,
-	&mcbsp2_fck,
-	&mcbsp3_ick,
-	&mcbsp3_fck,
-	&mcbsp4_ick,
-	&mcbsp4_fck,
-	&mcbsp5_ick,
-	&mcbsp5_fck,
-	&mcspi1_ick,
-	&mcspi1_fck,
-	&mcspi2_ick,
-	&mcspi2_fck,
-	&mcspi3_ick,
-	&mcspi3_fck,
-	&uart1_ick,
-	&uart1_fck,
-	&uart2_ick,
-	&uart2_fck,
-	&uart3_ick,
-	&uart3_fck,
-	&gpios_ick,
-	&gpios_fck,
-	&mpu_wdt_ick,
-	&mpu_wdt_fck,
-	&sync_32k_ick,
-	&wdt1_ick,
-	&omapctrl_ick,
-	&icr_ick,
-	&cam_fck,
-	&cam_ick,
-	&mailboxes_ick,
-	&wdt4_ick,
-	&wdt4_fck,
-	&wdt3_ick,
-	&wdt3_fck,
-	&mspro_ick,
-	&mspro_fck,
-	&mmc_ick,
-	&mmc_fck,
-	&fac_ick,
-	&fac_fck,
-	&eac_ick,
-	&eac_fck,
-	&hdq_ick,
-	&hdq_fck,
-	&i2c1_ick,
-	&i2c1_fck,
-	&i2chs1_fck,
-	&i2c2_ick,
-	&i2c2_fck,
-	&i2chs2_fck,
-	&vlynq_ick,
-	&vlynq_fck,
-	&sdrc_ick,
-	&des_ick,
-	&sha_ick,
-	&rng_ick,
-	&aes_ick,
-	&pka_ick,
-	&usb_fck,
-	&usbhs_ick,
-	&mmchs1_ick,
-	&mmchs1_fck,
-	&mmchs2_ick,
-	&mmchs2_fck,
-	&gpio5_ick,
-	&gpio5_fck,
-	&mdm_intc_ick,
-	&mmchsdb1_fck,
-	&mmchsdb2_fck,
-};
 
 #endif
diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
new file mode 100644
index 0000000..ece32d8
--- /dev/null
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -0,0 +1,539 @@
+/*
+ *  linux/arch/arm/mach-omap2/clock.c
+ *
+ *  Copyright (C) 2005-2008 Texas Instruments, Inc.
+ *  Copyright (C) 2004-2008 Nokia Corporation
+ *
+ *  Contacts:
+ *  Richard Woodruff <r-woodruff2@ti.com>
+ *  Paul Walmsley
+ *
+ *  Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
+ *  Gordon McNutt and RidgeRun, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+
+#include <linux/io.h>
+#include <linux/cpufreq.h>
+
+#include <asm/arch/clock.h>
+#include <asm/arch/sram.h>
+#include <asm/div64.h>
+#include <asm/bitops.h>
+
+#include "memory.h"
+#include "clock.h"
+#include "clock24xx.h"
+#include "prm.h"
+#include "prm-regbits-24xx.h"
+#include "cm.h"
+#include "cm-regbits-24xx.h"
+
+/* CM_CLKEN_PLL.EN_{54,96}M_PLL options (24XX) */
+#define EN_APLL_STOPPED			0
+#define EN_APLL_LOCKED			3
+
+/* CM_CLKSEL1_PLL.APLLS_CLKIN options (24XX) */
+#define APLLS_CLKIN_19_2MHZ		0
+#define APLLS_CLKIN_13MHZ		2
+#define APLLS_CLKIN_12MHZ		3
+
+/* #define DOWN_VARIABLE_DPLL 1 */		/* Experimental */
+
+static struct prcm_config *curr_prcm_set;
+static struct clk *vclk;
+static struct clk *sclk;
+
+/*-------------------------------------------------------------------------
+ * Omap24xx specific clock functions
+ *-------------------------------------------------------------------------*/
+
+/* This actually returns the rate of core_ck, not dpll_ck. */
+static u32 omap2_get_dpll_rate_24xx(struct clk *tclk)
+{
+	long long dpll_clk;
+	u8 amult;
+
+	dpll_clk = omap2_get_dpll_rate(tclk);
+
+	amult = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
+	amult &= OMAP24XX_CORE_CLK_SRC_MASK;
+	dpll_clk *= amult;
+
+	return dpll_clk;
+}
+
+static int omap2_enable_osc_ck(struct clk *clk)
+{
+	u32 pcc;
+
+	pcc = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL);
+
+	__raw_writel(pcc & ~OMAP_AUTOEXTCLKMODE_MASK,
+		      OMAP24XX_PRCM_CLKSRC_CTRL);
+
+	return 0;
+}
+
+static void omap2_disable_osc_ck(struct clk *clk)
+{
+	u32 pcc;
+
+	pcc = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL);
+
+	__raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK,
+		      OMAP24XX_PRCM_CLKSRC_CTRL);
+}
+
+#ifdef OLD_CK
+/* Recalculate SYST_CLK */
+static void omap2_sys_clk_recalc(struct clk * clk)
+{
+	u32 div = PRCM_CLKSRC_CTRL;
+	div &= (1 << 7) | (1 << 6);	/* Test if ext clk divided by 1 or 2 */
+	div >>= clk->rate_offset;
+	clk->rate = (clk->parent->rate / div);
+	propagate_rate(clk);
+}
+#endif	/* OLD_CK */
+
+/* Enable an APLL if off */
+static int omap2_clk_fixed_enable(struct clk *clk)
+{
+	u32 cval, apll_mask;
+
+	apll_mask = EN_APLL_LOCKED << clk->enable_bit;
+
+	cval = cm_read_mod_reg(PLL_MOD, CM_CLKEN);
+
+	if ((cval & apll_mask) == apll_mask)
+		return 0;   /* apll already enabled */
+
+	cval &= ~apll_mask;
+	cval |= apll_mask;
+	cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
+
+	if (clk == &apll96_ck)
+		cval = OMAP24XX_ST_96M_APLL;
+	else if (clk == &apll54_ck)
+		cval = OMAP24XX_ST_54M_APLL;
+
+	omap2_wait_clock_ready(OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), cval,
+			    clk->name);
+
+	/*
+	 * REVISIT: Should we return an error code if omap2_wait_clock_ready()
+	 * fails?
+	 */
+	return 0;
+}
+
+/* Stop APLL */
+static void omap2_clk_fixed_disable(struct clk *clk)
+{
+	u32 cval;
+
+	cval = cm_read_mod_reg(PLL_MOD, CM_CLKEN);
+	cval &= ~(EN_APLL_LOCKED << clk->enable_bit);
+	cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
+}
+
+/*
+ * Uses the current prcm set to tell if a rate is valid.
+ * You can go slower, but not faster within a given rate set.
+ */
+static u32 omap2_dpll_round_rate(unsigned long target_rate)
+{
+	u32 high, low, core_clk_src;
+
+	core_clk_src = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
+	core_clk_src &= OMAP24XX_CORE_CLK_SRC_MASK;
+
+	if (core_clk_src == CORE_CLK_SRC_DPLL) {	/* DPLL clockout */
+		high = curr_prcm_set->dpll_speed * 2;
+		low = curr_prcm_set->dpll_speed;
+	} else {				/* DPLL clockout x 2 */
+		high = curr_prcm_set->dpll_speed;
+		low = curr_prcm_set->dpll_speed / 2;
+	}
+
+#ifdef DOWN_VARIABLE_DPLL
+	if (target_rate > high)
+		return high;
+	else
+		return target_rate;
+#else
+	if (target_rate > low)
+		return high;
+	else
+		return low;
+#endif
+
+}
+
+static void omap2_dpll_recalc(struct clk *clk)
+{
+	clk->rate = omap2_get_dpll_rate_24xx(clk);
+
+	propagate_rate(clk);
+}
+
+static int omap2_reprogram_dpll(struct clk *clk, unsigned long rate)
+{
+	u32 cur_rate, low, mult, div, valid_rate, done_rate;
+	u32 bypass = 0;
+	struct prcm_config tmpset;
+	const struct dpll_data *dd;
+	unsigned long flags;
+	int ret = -EINVAL;
+
+	local_irq_save(flags);
+	cur_rate = omap2_get_dpll_rate_24xx(&dpll_ck);
+	mult = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
+	mult &= OMAP24XX_CORE_CLK_SRC_MASK;
+
+	if ((rate == (cur_rate / 2)) && (mult == 2)) {
+		omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL, 1);
+	} else if ((rate == (cur_rate * 2)) && (mult == 1)) {
+		omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL_X2, 1);
+	} else if (rate != cur_rate) {
+		valid_rate = omap2_dpll_round_rate(rate);
+		if (valid_rate != rate)
+			goto dpll_exit;
+
+		if (mult == 1)
+			low = curr_prcm_set->dpll_speed;
+		else
+			low = curr_prcm_set->dpll_speed / 2;
+
+		dd = clk->dpll_data;
+		if (!dd)
+			goto dpll_exit;
+
+		tmpset.cm_clksel1_pll = __raw_readl(dd->mult_div1_reg);
+		tmpset.cm_clksel1_pll &= ~(dd->mult_mask |
+					   dd->div1_mask);
+		div = ((curr_prcm_set->xtal_speed / 1000000) - 1);
+		tmpset.cm_clksel2_pll = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
+		tmpset.cm_clksel2_pll &= ~OMAP24XX_CORE_CLK_SRC_MASK;
+		if (rate > low) {
+			tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL_X2;
+			mult = ((rate / 2) / 1000000);
+			done_rate = CORE_CLK_SRC_DPLL_X2;
+		} else {
+			tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL;
+			mult = (rate / 1000000);
+			done_rate = CORE_CLK_SRC_DPLL;
+		}
+		tmpset.cm_clksel1_pll |= (div << __ffs(dd->mult_mask));
+		tmpset.cm_clksel1_pll |= (mult << __ffs(dd->div1_mask));
+
+		/* Worst case */
+		tmpset.base_sdrc_rfr = SDRC_RFR_CTRL_BYPASS;
+
+		if (rate == curr_prcm_set->xtal_speed)	/* If asking for 1-1 */
+			bypass = 1;
+
+		omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL_X2, 1); /* For init_mem */
+
+		/* Force dll lock mode */
+		omap2_set_prcm(tmpset.cm_clksel1_pll, tmpset.base_sdrc_rfr,
+			       bypass);
+
+		/* Errata: ret dll entry state */
+		omap2_init_memory_params(omap2_dll_force_needed());
+		omap2_reprogram_sdrc(done_rate, 0);
+	}
+	omap2_dpll_recalc(&dpll_ck);
+	ret = 0;
+
+dpll_exit:
+	local_irq_restore(flags);
+	return(ret);
+}
+
+/**
+ * omap2_table_mpu_recalc - just return the MPU speed
+ * @clk: virt_prcm_set struct clk
+ *
+ * Set virt_prcm_set's rate to the mpu_speed field of the current PRCM set.
+ */
+static void omap2_table_mpu_recalc(struct clk *clk)
+{
+	clk->rate = curr_prcm_set->mpu_speed;
+}
+
+/*
+ * Look for a rate equal or less than the target rate given a configuration set.
+ *
+ * What's not entirely clear is "which" field represents the key field.
+ * Some might argue L3-DDR, others ARM, others IVA. This code is simple and
+ * just uses the ARM rates.
+ */
+static long omap2_round_to_table_rate(struct clk *clk, unsigned long rate)
+{
+	struct prcm_config *ptr;
+	long highest_rate;
+
+	if (clk != &virt_prcm_set)
+		return -EINVAL;
+
+	highest_rate = -EINVAL;
+
+	for (ptr = rate_table; ptr->mpu_speed; ptr++) {
+		if (!(ptr->flags & cpu_mask))
+			continue;
+		if (ptr->xtal_speed != sys_ck.rate)
+			continue;
+
+		highest_rate = ptr->mpu_speed;
+
+		/* Can check only after xtal frequency check */
+		if (ptr->mpu_speed <= rate)
+			break;
+	}
+	return highest_rate;
+}
+
+/* Sets basic clocks based on the specified rate */
+static int omap2_select_table_rate(struct clk *clk, unsigned long rate)
+{
+	u32 cur_rate, done_rate, bypass = 0, tmp;
+	struct prcm_config *prcm;
+	unsigned long found_speed = 0;
+	unsigned long flags;
+
+	if (clk != &virt_prcm_set)
+		return -EINVAL;
+
+	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
+		if (!(prcm->flags & cpu_mask))
+			continue;
+
+		if (prcm->xtal_speed != sys_ck.rate)
+			continue;
+
+		if (prcm->mpu_speed <= rate) {
+			found_speed = prcm->mpu_speed;
+			break;
+		}
+	}
+
+	if (!found_speed) {
+		printk(KERN_INFO "Could not set MPU rate to %luMHz\n",
+		       rate / 1000000);
+		return -EINVAL;
+	}
+
+	curr_prcm_set = prcm;
+	cur_rate = omap2_get_dpll_rate_24xx(&dpll_ck);
+
+	if (prcm->dpll_speed == cur_rate / 2) {
+		omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL, 1);
+	} else if (prcm->dpll_speed == cur_rate * 2) {
+		omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL_X2, 1);
+	} else if (prcm->dpll_speed != cur_rate) {
+		local_irq_save(flags);
+
+		if (prcm->dpll_speed == prcm->xtal_speed)
+			bypass = 1;
+
+		if ((prcm->cm_clksel2_pll & OMAP24XX_CORE_CLK_SRC_MASK) ==
+		    CORE_CLK_SRC_DPLL_X2)
+			done_rate = CORE_CLK_SRC_DPLL_X2;
+		else
+			done_rate = CORE_CLK_SRC_DPLL;
+
+		/* MPU divider */
+		cm_write_mod_reg(prcm->cm_clksel_mpu, MPU_MOD, CM_CLKSEL);
+
+		/* dsp + iva1 div(2420), iva2.1(2430) */
+		cm_write_mod_reg(prcm->cm_clksel_dsp,
+				 OMAP24XX_DSP_MOD, CM_CLKSEL);
+
+		cm_write_mod_reg(prcm->cm_clksel_gfx, GFX_MOD, CM_CLKSEL);
+
+		/* Major subsystem dividers */
+		tmp = cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) & OMAP24XX_CLKSEL_DSS2_MASK;
+		cm_write_mod_reg(prcm->cm_clksel1_core | tmp, CORE_MOD, CM_CLKSEL1);
+		if (cpu_is_omap2430())
+			cm_write_mod_reg(prcm->cm_clksel_mdm,
+					 OMAP2430_MDM_MOD, CM_CLKSEL);
+
+		/* x2 to enter init_mem */
+		omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL_X2, 1);
+
+		omap2_set_prcm(prcm->cm_clksel1_pll, prcm->base_sdrc_rfr,
+			       bypass);
+
+		omap2_init_memory_params(omap2_dll_force_needed());
+		omap2_reprogram_sdrc(done_rate, 0);
+
+		local_irq_restore(flags);
+	}
+	omap2_dpll_recalc(&dpll_ck);
+
+	return 0;
+}
+
+static struct clk_functions omap2_clk_functions = {
+	.clk_enable		= omap2_clk_enable,
+	.clk_disable		= omap2_clk_disable,
+	.clk_round_rate		= omap2_clk_round_rate,
+	.clk_set_rate		= omap2_clk_set_rate,
+	.clk_set_parent		= omap2_clk_set_parent,
+	.clk_disable_unused	= omap2_clk_disable_unused,
+};
+
+static u32 omap2_get_apll_clkin(void)
+{
+	u32 aplls, sclk = 0;
+
+	aplls = cm_read_mod_reg(PLL_MOD, CM_CLKSEL1);
+	aplls &= OMAP24XX_APLLS_CLKIN_MASK;
+	aplls >>= OMAP24XX_APLLS_CLKIN_SHIFT;
+
+	if (aplls == APLLS_CLKIN_19_2MHZ)
+		sclk = 19200000;
+	else if (aplls == APLLS_CLKIN_13MHZ)
+		sclk = 13000000;
+	else if (aplls == APLLS_CLKIN_12MHZ)
+		sclk = 12000000;
+
+	return sclk;
+}
+
+static u32 omap2_get_sysclkdiv(void)
+{
+	u32 div;
+
+	div = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL);
+	div &= OMAP_SYSCLKDIV_MASK;
+	div >>= OMAP_SYSCLKDIV_SHIFT;
+
+	return div;
+}
+
+static void omap2_osc_clk_recalc(struct clk *clk)
+{
+	clk->rate = omap2_get_apll_clkin() * omap2_get_sysclkdiv();
+	propagate_rate(clk);
+}
+
+static void omap2_sys_clk_recalc(struct clk *clk)
+{
+	clk->rate = clk->parent->rate / omap2_get_sysclkdiv();
+	propagate_rate(clk);
+}
+
+/*
+ * Set clocks for bypass mode for reboot to work.
+ */
+void omap2_clk_prepare_for_reboot(void)
+{
+	u32 rate;
+
+	if (vclk == NULL || sclk == NULL)
+		return;
+
+	rate = clk_get_rate(sclk);
+	clk_set_rate(vclk, rate);
+}
+
+/*
+ * Switch the MPU rate if specified on cmdline.
+ * We cannot do this early until cmdline is parsed.
+ */
+static int __init omap2_clk_arch_init(void)
+{
+	if (!mpurate)
+		return -EINVAL;
+
+	if (omap2_select_table_rate(&virt_prcm_set, mpurate))
+		printk(KERN_ERR "Could not find matching MPU rate\n");
+
+	recalculate_root_clocks();
+
+	printk(KERN_INFO "Switched to new clocking rate (Crystal/DPLL/MPU): "
+	       "%ld.%01ld/%ld/%ld MHz\n",
+	       (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10,
+	       (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ;
+
+	return 0;
+}
+arch_initcall(omap2_clk_arch_init);
+
+int __init omap2_clk_init(void)
+{
+	struct prcm_config *prcm;
+	struct clk **clkp;
+	u32 clkrate;
+
+	if (cpu_is_omap242x())
+		cpu_mask = RATE_IN_242X;
+	else if (cpu_is_omap2430())
+		cpu_mask = RATE_IN_243X;
+
+	clk_init(&omap2_clk_functions);
+
+	omap2_osc_clk_recalc(&osc_ck);
+	omap2_sys_clk_recalc(&sys_ck);
+
+	for (clkp = onchip_24xx_clks;
+	     clkp < onchip_24xx_clks + ARRAY_SIZE(onchip_24xx_clks);
+	     clkp++) {
+
+		if ((*clkp)->flags & CLOCK_IN_OMAP242X && cpu_is_omap2420()) {
+			clk_register(*clkp);
+			continue;
+		}
+
+		if ((*clkp)->flags & CLOCK_IN_OMAP243X && cpu_is_omap2430()) {
+			clk_register(*clkp);
+			continue;
+		}
+	}
+
+	/* Check the MPU rate set by bootloader */
+	clkrate = omap2_get_dpll_rate_24xx(&dpll_ck);
+	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
+		if (!(prcm->flags & cpu_mask))
+			continue;
+		if (prcm->xtal_speed != sys_ck.rate)
+			continue;
+		if (prcm->dpll_speed <= clkrate)
+			 break;
+	}
+	curr_prcm_set = prcm;
+
+	recalculate_root_clocks();
+
+	printk(KERN_INFO "Clocking rate (Crystal/DPLL/MPU): "
+	       "%ld.%01ld/%ld/%ld MHz\n",
+	       (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10,
+	       (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ;
+
+	/*
+	 * Only enable those clocks we will need, let the drivers
+	 * enable other clocks as necessary
+	 */
+	clk_enable_init_clocks();
+
+	/* Avoid sleeping sleeping during omap2_clk_prepare_for_reboot() */
+	vclk = clk_get(NULL, "virt_prcm_set");
+	sclk = clk_get(NULL, "sys_ck");
+
+	return 0;
+}
diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h
new file mode 100644
index 0000000..88081ed
--- /dev/null
+++ b/arch/arm/mach-omap2/clock24xx.h
@@ -0,0 +1,2643 @@
+/*
+ *  linux/arch/arm/mach-omap2/clock24xx.h
+ *
+ *  Copyright (C) 2005-2008 Texas Instruments, Inc.
+ *  Copyright (C) 2004-2008 Nokia Corporation
+ *
+ *  Contacts:
+ *  Richard Woodruff <r-woodruff2@ti.com>
+ *  Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK24XX_H
+#define __ARCH_ARM_MACH_OMAP2_CLOCK24XX_H
+
+#include "clock.h"
+
+#include "prm.h"
+#include "cm.h"
+#include "prm-regbits-24xx.h"
+#include "cm-regbits-24xx.h"
+#include "sdrc.h"
+
+static void omap2_table_mpu_recalc(struct clk *clk);
+static int omap2_select_table_rate(struct clk *clk, unsigned long rate);
+static long omap2_round_to_table_rate(struct clk *clk, unsigned long rate);
+static void omap2_sys_clk_recalc(struct clk *clk);
+static void omap2_osc_clk_recalc(struct clk *clk);
+static void omap2_sys_clk_recalc(struct clk *clk);
+static void omap2_dpll_recalc(struct clk *clk);
+static int omap2_clk_fixed_enable(struct clk *clk);
+static void omap2_clk_fixed_disable(struct clk *clk);
+static int omap2_enable_osc_ck(struct clk *clk);
+static void omap2_disable_osc_ck(struct clk *clk);
+static int omap2_reprogram_dpll(struct clk *clk, unsigned long rate);
+
+/* Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
+ * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,CM_CLKSEL_DSP
+ * CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL CM_CLKSEL2_PLL, CM_CLKSEL_MDM
+ */
+struct prcm_config {
+	unsigned long xtal_speed;	/* crystal rate */
+	unsigned long dpll_speed;	/* dpll: out*xtal*M/(N-1)table_recalc */
+	unsigned long mpu_speed;	/* speed of MPU */
+	unsigned long cm_clksel_mpu;	/* mpu divider */
+	unsigned long cm_clksel_dsp;	/* dsp+iva1 div(2420), iva2.1(2430) */
+	unsigned long cm_clksel_gfx;	/* gfx dividers */
+	unsigned long cm_clksel1_core;	/* major subsystem dividers */
+	unsigned long cm_clksel1_pll;	/* m,n */
+	unsigned long cm_clksel2_pll;	/* dpllx1 or x2 out */
+	unsigned long cm_clksel_mdm;	/* modem dividers 2430 only */
+	unsigned long base_sdrc_rfr;	/* base refresh timing for a set */
+	unsigned char flags;
+};
+
+/*
+ * The OMAP2 processor can be run at several discrete 'PRCM configurations'.
+ * These configurations are characterized by voltage and speed for clocks.
+ * The device is only validated for certain combinations. One way to express
+ * these combinations is via the 'ratio's' which the clocks operate with
+ * respect to each other. These ratio sets are for a given voltage/DPLL
+ * setting. All configurations can be described by a DPLL setting and a ratio
+ * There are 3 ratio sets for the 2430 and X ratio sets for 2420.
+ *
+ * 2430 differs from 2420 in that there are no more phase synchronizers used.
+ * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs
+ * 2430 (iva2.1, NOdsp, mdm)
+ */
+
+/* Core fields for cm_clksel, not ratio governed */
+#define RX_CLKSEL_DSS1			(0x10 << 8)
+#define RX_CLKSEL_DSS2			(0x0 << 13)
+#define RX_CLKSEL_SSI			(0x5 << 20)
+
+/*-------------------------------------------------------------------------
+ * Voltage/DPLL ratios
+ *-------------------------------------------------------------------------*/
+
+/* 2430 Ratio's, 2430-Ratio Config 1 */
+#define R1_CLKSEL_L3			(4 << 0)
+#define R1_CLKSEL_L4			(2 << 5)
+#define R1_CLKSEL_USB			(4 << 25)
+#define R1_CM_CLKSEL1_CORE_VAL		R1_CLKSEL_USB | RX_CLKSEL_SSI | \
+					RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
+					R1_CLKSEL_L4 | R1_CLKSEL_L3
+#define R1_CLKSEL_MPU			(2 << 0)
+#define R1_CM_CLKSEL_MPU_VAL		R1_CLKSEL_MPU
+#define R1_CLKSEL_DSP			(2 << 0)
+#define R1_CLKSEL_DSP_IF		(2 << 5)
+#define R1_CM_CLKSEL_DSP_VAL		R1_CLKSEL_DSP | R1_CLKSEL_DSP_IF
+#define R1_CLKSEL_GFX			(2 << 0)
+#define R1_CM_CLKSEL_GFX_VAL		R1_CLKSEL_GFX
+#define R1_CLKSEL_MDM			(4 << 0)
+#define R1_CM_CLKSEL_MDM_VAL		R1_CLKSEL_MDM
+
+/* 2430-Ratio Config 2 */
+#define R2_CLKSEL_L3			(6 << 0)
+#define R2_CLKSEL_L4			(2 << 5)
+#define R2_CLKSEL_USB			(2 << 25)
+#define R2_CM_CLKSEL1_CORE_VAL		R2_CLKSEL_USB | RX_CLKSEL_SSI | \
+					RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
+					R2_CLKSEL_L4 | R2_CLKSEL_L3
+#define R2_CLKSEL_MPU			(2 << 0)
+#define R2_CM_CLKSEL_MPU_VAL		R2_CLKSEL_MPU
+#define R2_CLKSEL_DSP			(2 << 0)
+#define R2_CLKSEL_DSP_IF		(3 << 5)
+#define R2_CM_CLKSEL_DSP_VAL		R2_CLKSEL_DSP | R2_CLKSEL_DSP_IF
+#define R2_CLKSEL_GFX			(2 << 0)
+#define R2_CM_CLKSEL_GFX_VAL		R2_CLKSEL_GFX
+#define R2_CLKSEL_MDM			(6 << 0)
+#define R2_CM_CLKSEL_MDM_VAL		R2_CLKSEL_MDM
+
+/* 2430-Ratio Bootm (BYPASS) */
+#define RB_CLKSEL_L3			(1 << 0)
+#define RB_CLKSEL_L4			(1 << 5)
+#define RB_CLKSEL_USB			(1 << 25)
+#define RB_CM_CLKSEL1_CORE_VAL		RB_CLKSEL_USB | RX_CLKSEL_SSI | \
+					RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
+					RB_CLKSEL_L4 | RB_CLKSEL_L3
+#define RB_CLKSEL_MPU			(1 << 0)
+#define RB_CM_CLKSEL_MPU_VAL		RB_CLKSEL_MPU
+#define RB_CLKSEL_DSP			(1 << 0)
+#define RB_CLKSEL_DSP_IF		(1 << 5)
+#define RB_CM_CLKSEL_DSP_VAL		RB_CLKSEL_DSP | RB_CLKSEL_DSP_IF
+#define RB_CLKSEL_GFX			(1 << 0)
+#define RB_CM_CLKSEL_GFX_VAL		RB_CLKSEL_GFX
+#define RB_CLKSEL_MDM			(1 << 0)
+#define RB_CM_CLKSEL_MDM_VAL		RB_CLKSEL_MDM
+
+/* 2420 Ratio Equivalents */
+#define RXX_CLKSEL_VLYNQ		(0x12 << 15)
+#define RXX_CLKSEL_SSI			(0x8 << 20)
+
+/* 2420-PRCM III 532MHz core */
+#define RIII_CLKSEL_L3			(4 << 0)	/* 133MHz */
+#define RIII_CLKSEL_L4			(2 << 5)	/* 66.5MHz */
+#define RIII_CLKSEL_USB			(4 << 25)	/* 33.25MHz */
+#define RIII_CM_CLKSEL1_CORE_VAL	RIII_CLKSEL_USB | RXX_CLKSEL_SSI | \
+					RXX_CLKSEL_VLYNQ | RX_CLKSEL_DSS2 | \
+					RX_CLKSEL_DSS1 | RIII_CLKSEL_L4 | \
+					RIII_CLKSEL_L3
+#define RIII_CLKSEL_MPU			(2 << 0)	/* 266MHz */
+#define RIII_CM_CLKSEL_MPU_VAL		RIII_CLKSEL_MPU
+#define RIII_CLKSEL_DSP			(3 << 0)	/* c5x - 177.3MHz */
+#define RIII_CLKSEL_DSP_IF		(2 << 5)	/* c5x - 88.67MHz */
+#define RIII_SYNC_DSP			(1 << 7)	/* Enable sync */
+#define RIII_CLKSEL_IVA			(6 << 8)	/* iva1 - 88.67MHz */
+#define RIII_SYNC_IVA			(1 << 13)	/* Enable sync */
+#define RIII_CM_CLKSEL_DSP_VAL		RIII_SYNC_IVA | RIII_CLKSEL_IVA | \
+					RIII_SYNC_DSP | RIII_CLKSEL_DSP_IF | \
+					RIII_CLKSEL_DSP
+#define RIII_CLKSEL_GFX			(2 << 0)	/* 66.5MHz */
+#define RIII_CM_CLKSEL_GFX_VAL		RIII_CLKSEL_GFX
+
+/* 2420-PRCM II 600MHz core */
+#define RII_CLKSEL_L3			(6 << 0)	/* 100MHz */
+#define RII_CLKSEL_L4			(2 << 5)	/* 50MHz */
+#define RII_CLKSEL_USB			(2 << 25)	/* 50MHz */
+#define RII_CM_CLKSEL1_CORE_VAL		RII_CLKSEL_USB | \
+					RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \
+					RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
+					RII_CLKSEL_L4 | RII_CLKSEL_L3
+#define RII_CLKSEL_MPU			(2 << 0)	/* 300MHz */
+#define RII_CM_CLKSEL_MPU_VAL		RII_CLKSEL_MPU
+#define RII_CLKSEL_DSP			(3 << 0)	/* c5x - 200MHz */
+#define RII_CLKSEL_DSP_IF		(2 << 5)	/* c5x - 100MHz */
+#define RII_SYNC_DSP			(0 << 7)	/* Bypass sync */
+#define RII_CLKSEL_IVA			(3 << 8)	/* iva1 - 200MHz */
+#define RII_SYNC_IVA			(0 << 13)	/* Bypass sync */
+#define RII_CM_CLKSEL_DSP_VAL		RII_SYNC_IVA | RII_CLKSEL_IVA | \
+					RII_SYNC_DSP | RII_CLKSEL_DSP_IF | \
+					RII_CLKSEL_DSP
+#define RII_CLKSEL_GFX			(2 << 0)	/* 50MHz */
+#define RII_CM_CLKSEL_GFX_VAL		RII_CLKSEL_GFX
+
+/* 2420-PRCM I 660MHz core */
+#define RI_CLKSEL_L3			(4 << 0)	/* 165MHz */
+#define RI_CLKSEL_L4			(2 << 5)	/* 82.5MHz */
+#define RI_CLKSEL_USB			(4 << 25)	/* 41.25MHz */
+#define RI_CM_CLKSEL1_CORE_VAL		RI_CLKSEL_USB | \
+					RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \
+					RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
+					RI_CLKSEL_L4 | RI_CLKSEL_L3
+#define RI_CLKSEL_MPU			(2 << 0)	/* 330MHz */
+#define RI_CM_CLKSEL_MPU_VAL		RI_CLKSEL_MPU
+#define RI_CLKSEL_DSP			(3 << 0)	/* c5x - 220MHz */
+#define RI_CLKSEL_DSP_IF		(2 << 5)	/* c5x - 110MHz */
+#define RI_SYNC_DSP			(1 << 7)	/* Activate sync */
+#define RI_CLKSEL_IVA			(4 << 8)	/* iva1 - 165MHz */
+#define RI_SYNC_IVA			(0 << 13)	/* Bypass sync */
+#define RI_CM_CLKSEL_DSP_VAL		RI_SYNC_IVA | RI_CLKSEL_IVA | \
+					RI_SYNC_DSP | RI_CLKSEL_DSP_IF | \
+					RI_CLKSEL_DSP
+#define RI_CLKSEL_GFX			(1 << 0)	/* 165MHz */
+#define RI_CM_CLKSEL_GFX_VAL		RI_CLKSEL_GFX
+
+/* 2420-PRCM VII (boot) */
+#define RVII_CLKSEL_L3			(1 << 0)
+#define RVII_CLKSEL_L4			(1 << 5)
+#define RVII_CLKSEL_DSS1		(1 << 8)
+#define RVII_CLKSEL_DSS2		(0 << 13)
+#define RVII_CLKSEL_VLYNQ		(1 << 15)
+#define RVII_CLKSEL_SSI			(1 << 20)
+#define RVII_CLKSEL_USB			(1 << 25)
+
+#define RVII_CM_CLKSEL1_CORE_VAL	RVII_CLKSEL_USB | RVII_CLKSEL_SSI | \
+					RVII_CLKSEL_VLYNQ | RVII_CLKSEL_DSS2 | \
+					RVII_CLKSEL_DSS1 | RVII_CLKSEL_L4 | RVII_CLKSEL_L3
+
+#define RVII_CLKSEL_MPU			(1 << 0) /* all divide by 1 */
+#define RVII_CM_CLKSEL_MPU_VAL		RVII_CLKSEL_MPU
+
+#define RVII_CLKSEL_DSP			(1 << 0)
+#define RVII_CLKSEL_DSP_IF		(1 << 5)
+#define RVII_SYNC_DSP			(0 << 7)
+#define RVII_CLKSEL_IVA			(1 << 8)
+#define RVII_SYNC_IVA			(0 << 13)
+#define RVII_CM_CLKSEL_DSP_VAL		RVII_SYNC_IVA | RVII_CLKSEL_IVA | RVII_SYNC_DSP | \
+					RVII_CLKSEL_DSP_IF | RVII_CLKSEL_DSP
+
+#define RVII_CLKSEL_GFX			(1 << 0)
+#define RVII_CM_CLKSEL_GFX_VAL		RVII_CLKSEL_GFX
+
+/*-------------------------------------------------------------------------
+ * 2430 Target modes: Along with each configuration the CPU has several
+ * modes which goes along with them. Modes mainly are the addition of
+ * describe DPLL combinations to go along with a ratio.
+ *-------------------------------------------------------------------------*/
+
+/* Hardware governed */
+#define MX_48M_SRC			(0 << 3)
+#define MX_54M_SRC			(0 << 5)
+#define MX_APLLS_CLIKIN_12		(3 << 23)
+#define MX_APLLS_CLIKIN_13		(2 << 23)
+#define MX_APLLS_CLIKIN_19_2		(0 << 23)
+
+/*
+ * 2430 - standalone, 2*ref*M/(n+1), M/N is for exactness not relock speed
+ * #5a	(ratio1) baseport-target, target DPLL = 266*2 = 532MHz
+ */
+#define M5A_DPLL_MULT_12		(133 << 12)
+#define M5A_DPLL_DIV_12			(5 << 8)
+#define M5A_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M5A_DPLL_DIV_12 | M5A_DPLL_MULT_12 | \
+					MX_APLLS_CLIKIN_12
+#define M5A_DPLL_MULT_13		(61 << 12)
+#define M5A_DPLL_DIV_13			(2 << 8)
+#define M5A_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M5A_DPLL_DIV_13 | M5A_DPLL_MULT_13 | \
+					MX_APLLS_CLIKIN_13
+#define M5A_DPLL_MULT_19		(55 << 12)
+#define M5A_DPLL_DIV_19			(3 << 8)
+#define M5A_CM_CLKSEL1_PLL_19_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M5A_DPLL_DIV_19 | M5A_DPLL_MULT_19 | \
+					MX_APLLS_CLIKIN_19_2
+/* #5b	(ratio1) target DPLL = 200*2 = 400MHz */
+#define M5B_DPLL_MULT_12		(50 << 12)
+#define M5B_DPLL_DIV_12			(2 << 8)
+#define M5B_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M5B_DPLL_DIV_12 | M5B_DPLL_MULT_12 | \
+					MX_APLLS_CLIKIN_12
+#define M5B_DPLL_MULT_13		(200 << 12)
+#define M5B_DPLL_DIV_13			(12 << 8)
+
+#define M5B_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M5B_DPLL_DIV_13 | M5B_DPLL_MULT_13 | \
+					MX_APLLS_CLIKIN_13
+#define M5B_DPLL_MULT_19		(125 << 12)
+#define M5B_DPLL_DIV_19			(31 << 8)
+#define M5B_CM_CLKSEL1_PLL_19_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M5B_DPLL_DIV_19 | M5B_DPLL_MULT_19 | \
+					MX_APLLS_CLIKIN_19_2
+/*
+ * #4	(ratio2), DPLL = 399*2 = 798MHz, L3=133MHz
+ */
+#define M4_DPLL_MULT_12			(133 << 12)
+#define M4_DPLL_DIV_12			(3 << 8)
+#define M4_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M4_DPLL_DIV_12 | M4_DPLL_MULT_12 | \
+					MX_APLLS_CLIKIN_12
+
+#define M4_DPLL_MULT_13			(399 << 12)
+#define M4_DPLL_DIV_13			(12 << 8)
+#define M4_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M4_DPLL_DIV_13 | M4_DPLL_MULT_13 | \
+					MX_APLLS_CLIKIN_13
+
+#define M4_DPLL_MULT_19			(145 << 12)
+#define M4_DPLL_DIV_19			(6 << 8)
+#define M4_CM_CLKSEL1_PLL_19_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M4_DPLL_DIV_19 | M4_DPLL_MULT_19 | \
+					MX_APLLS_CLIKIN_19_2
+
+/*
+ * #3	(ratio2) baseport-target, target DPLL = 330*2 = 660MHz
+ */
+#define M3_DPLL_MULT_12			(55 << 12)
+#define M3_DPLL_DIV_12			(1 << 8)
+#define M3_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M3_DPLL_DIV_12 | M3_DPLL_MULT_12 | \
+					MX_APLLS_CLIKIN_12
+#define M3_DPLL_MULT_13			(76 << 12)
+#define M3_DPLL_DIV_13			(2 << 8)
+#define M3_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M3_DPLL_DIV_13 | M3_DPLL_MULT_13 | \
+					MX_APLLS_CLIKIN_13
+#define M3_DPLL_MULT_19			(17 << 12)
+#define M3_DPLL_DIV_19			(0 << 8)
+#define M3_CM_CLKSEL1_PLL_19_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M3_DPLL_DIV_19 | M3_DPLL_MULT_19 | \
+					MX_APLLS_CLIKIN_19_2
+
+/*
+ * #2   (ratio1) DPLL = 330*2 = 660MHz, L3=165MHz
+ */
+#define M2_DPLL_MULT_12		        (55 << 12)
+#define M2_DPLL_DIV_12		        (1 << 8)
+#define M2_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M2_DPLL_DIV_12 | M2_DPLL_MULT_12 | \
+					MX_APLLS_CLIKIN_12
+
+/* Speed changes - Used 658.7MHz instead of 660MHz for LP-Refresh M=76 N=2,
+ * relock time issue */
+/* Core frequency changed from 330/165 to 329/164 MHz*/
+#define M2_DPLL_MULT_13		        (76 << 12)
+#define M2_DPLL_DIV_13		        (2 << 8)
+#define M2_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M2_DPLL_DIV_13 | M2_DPLL_MULT_13 | \
+					MX_APLLS_CLIKIN_13
+
+#define M2_DPLL_MULT_19		        (17 << 12)
+#define M2_DPLL_DIV_19		        (0 << 8)
+#define M2_CM_CLKSEL1_PLL_19_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M2_DPLL_DIV_19 | M2_DPLL_MULT_19 | \
+					MX_APLLS_CLIKIN_19_2
+
+/* boot (boot) */
+#define MB_DPLL_MULT			(1 << 12)
+#define MB_DPLL_DIV			(0 << 8)
+#define MB_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\
+					MB_DPLL_MULT | MX_APLLS_CLIKIN_12
+
+#define MB_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\
+					MB_DPLL_MULT | MX_APLLS_CLIKIN_13
+
+#define MB_CM_CLKSEL1_PLL_19_VAL	MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\
+					MB_DPLL_MULT | MX_APLLS_CLIKIN_19
+
+/*
+ * 2430 - chassis (sedna)
+ * 165 (ratio1) same as above #2
+ * 150 (ratio1)
+ * 133 (ratio2) same as above #4
+ * 110 (ratio2) same as above #3
+ * 104 (ratio2)
+ * boot (boot)
+ */
+
+/* PRCM I target DPLL = 2*330MHz = 660MHz */
+#define MI_DPLL_MULT_12			(55 << 12)
+#define MI_DPLL_DIV_12			(1 << 8)
+#define MI_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
+					MI_DPLL_DIV_12 | MI_DPLL_MULT_12 | \
+					MX_APLLS_CLIKIN_12
+
+/*
+ * 2420 Equivalent - mode registers
+ * PRCM II , target DPLL = 2*300MHz = 600MHz
+ */
+#define MII_DPLL_MULT_12		(50 << 12)
+#define MII_DPLL_DIV_12			(1 << 8)
+#define MII_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
+					MII_DPLL_DIV_12 | MII_DPLL_MULT_12 | \
+					MX_APLLS_CLIKIN_12
+#define MII_DPLL_MULT_13		(300 << 12)
+#define MII_DPLL_DIV_13			(12 << 8)
+#define MII_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
+					MII_DPLL_DIV_13 | MII_DPLL_MULT_13 | \
+					MX_APLLS_CLIKIN_13
+
+/* PRCM III target DPLL = 2*266 = 532MHz*/
+#define MIII_DPLL_MULT_12		(133 << 12)
+#define MIII_DPLL_DIV_12		(5 << 8)
+#define MIII_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
+					MIII_DPLL_DIV_12 | MIII_DPLL_MULT_12 | \
+					MX_APLLS_CLIKIN_12
+#define MIII_DPLL_MULT_13		(266 << 12)
+#define MIII_DPLL_DIV_13		(12 << 8)
+#define MIII_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
+					MIII_DPLL_DIV_13 | MIII_DPLL_MULT_13 | \
+					MX_APLLS_CLIKIN_13
+
+/* PRCM VII (boot bypass) */
+#define MVII_CM_CLKSEL1_PLL_12_VAL	MB_CM_CLKSEL1_PLL_12_VAL
+#define MVII_CM_CLKSEL1_PLL_13_VAL	MB_CM_CLKSEL1_PLL_13_VAL
+
+/* High and low operation value */
+#define MX_CLKSEL2_PLL_2x_VAL		(2 << 0)
+#define MX_CLKSEL2_PLL_1x_VAL		(1 << 0)
+
+/* MPU speed defines */
+#define S12M	12000000
+#define S13M	13000000
+#define S19M	19200000
+#define S26M	26000000
+#define S100M	100000000
+#define S133M	133000000
+#define S150M	150000000
+#define S164M	164000000
+#define S165M	165000000
+#define S199M	199000000
+#define S200M	200000000
+#define S266M	266000000
+#define S300M	300000000
+#define S329M	329000000
+#define S330M	330000000
+#define S399M	399000000
+#define S400M	400000000
+#define S532M	532000000
+#define S600M	600000000
+#define S658M	658000000
+#define S660M	660000000
+#define S798M	798000000
+
+/*-------------------------------------------------------------------------
+ * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
+ * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,
+ * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL,
+ * CM_CLKSEL2_PLL, CM_CLKSEL_MDM
+ *
+ * Filling in table based on H4 boards and 2430-SDPs variants available.
+ * There are quite a few more rates combinations which could be defined.
+ *
+ * When multiple values are defined the start up will try and choose the
+ * fastest one. If a 'fast' value is defined, then automatically, the /2
+ * one should be included as it can be used.	Generally having more that
+ * one fast set does not make sense, as static timings need to be changed
+ * to change the set.	 The exception is the bypass setting which is
+ * availble for low power bypass.
+ *
+ * Note: This table needs to be sorted, fastest to slowest.
+ *-------------------------------------------------------------------------*/
+static struct prcm_config rate_table[] = {
+	/* PRCM I - FAST */
+	{S12M, S660M, S330M, RI_CM_CLKSEL_MPU_VAL,		/* 330MHz ARM */
+		RI_CM_CLKSEL_DSP_VAL, RI_CM_CLKSEL_GFX_VAL,
+		RI_CM_CLKSEL1_CORE_VAL, MI_CM_CLKSEL1_PLL_12_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_165MHz,
+		RATE_IN_242X},
+
+	/* PRCM II - FAST */
+	{S12M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL,		/* 300MHz ARM */
+		RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
+		RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
+		RATE_IN_242X},
+
+	{S13M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL,		/* 300MHz ARM */
+		RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
+		RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
+		RATE_IN_242X},
+
+	/* PRCM III - FAST */
+	{S12M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL,		/* 266MHz ARM */
+		RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
+		RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
+		RATE_IN_242X},
+
+	{S13M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL,		/* 266MHz ARM */
+		RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
+		RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
+		RATE_IN_242X},
+
+	/* PRCM II - SLOW */
+	{S12M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL,		/* 150MHz ARM */
+		RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
+		RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
+		RATE_IN_242X},
+
+	{S13M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL,		/* 150MHz ARM */
+		RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
+		RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
+		RATE_IN_242X},
+
+	/* PRCM III - SLOW */
+	{S12M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL,		/* 133MHz ARM */
+		RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
+		RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
+		RATE_IN_242X},
+
+	{S13M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL,		/* 133MHz ARM */
+		RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
+		RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
+		RATE_IN_242X},
+
+	/* PRCM-VII (boot-bypass) */
+	{S12M, S12M, S12M, RVII_CM_CLKSEL_MPU_VAL,		/* 12MHz ARM*/
+		RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL,
+		RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_12_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS,
+		RATE_IN_242X},
+
+	/* PRCM-VII (boot-bypass) */
+	{S13M, S13M, S13M, RVII_CM_CLKSEL_MPU_VAL,		/* 13MHz ARM */
+		RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL,
+		RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS,
+		RATE_IN_242X},
+
+	/* PRCM #4 - ratio2 (ES2.1) - FAST */
+	{S13M, S798M, S399M, R2_CM_CLKSEL_MPU_VAL,		/* 399MHz ARM */
+		R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
+		R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, R2_CM_CLKSEL_MDM_VAL,
+		SDRC_RFR_CTRL_133MHz,
+		RATE_IN_243X},
+
+	/* PRCM #2 - ratio1 (ES2) - FAST */
+	{S13M, S658M, S329M, R1_CM_CLKSEL_MPU_VAL,		/* 330MHz ARM */
+		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
+		R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
+		SDRC_RFR_CTRL_165MHz,
+		RATE_IN_243X},
+
+	/* PRCM #5a - ratio1 - FAST */
+	{S13M, S532M, S266M, R1_CM_CLKSEL_MPU_VAL,		/* 266MHz ARM */
+		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
+		R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
+		SDRC_RFR_CTRL_133MHz,
+		RATE_IN_243X},
+
+	/* PRCM #5b - ratio1 - FAST */
+	{S13M, S400M, S200M, R1_CM_CLKSEL_MPU_VAL,		/* 200MHz ARM */
+		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
+		R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
+		SDRC_RFR_CTRL_100MHz,
+		RATE_IN_243X},
+
+	/* PRCM #4 - ratio1 (ES2.1) - SLOW */
+	{S13M, S399M, S199M, R2_CM_CLKSEL_MPU_VAL,		/* 200MHz ARM */
+		R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
+		R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_1x_VAL, R2_CM_CLKSEL_MDM_VAL,
+		SDRC_RFR_CTRL_133MHz,
+		RATE_IN_243X},
+
+	/* PRCM #2 - ratio1 (ES2) - SLOW */
+	{S13M, S329M, S164M, R1_CM_CLKSEL_MPU_VAL,		/* 165MHz ARM */
+		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
+		R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
+		SDRC_RFR_CTRL_165MHz,
+		RATE_IN_243X},
+
+	/* PRCM #5a - ratio1 - SLOW */
+	{S13M, S266M, S133M, R1_CM_CLKSEL_MPU_VAL,		/* 133MHz ARM */
+		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
+		R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
+		SDRC_RFR_CTRL_133MHz,
+		RATE_IN_243X},
+
+	/* PRCM #5b - ratio1 - SLOW*/
+	{S13M, S200M, S100M, R1_CM_CLKSEL_MPU_VAL,		/* 100MHz ARM */
+		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
+		R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
+		SDRC_RFR_CTRL_100MHz,
+		RATE_IN_243X},
+
+	/* PRCM-boot/bypass */
+	{S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL,		/* 13Mhz */
+		RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
+		RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
+		SDRC_RFR_CTRL_BYPASS,
+		RATE_IN_243X},
+
+	/* PRCM-boot/bypass */
+	{S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL,		/* 12Mhz */
+		RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
+		RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_12_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
+		SDRC_RFR_CTRL_BYPASS,
+		RATE_IN_243X},
+
+	{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
+};
+
+/*-------------------------------------------------------------------------
+ * 24xx clock tree.
+ *
+ * NOTE:In many cases here we are assigning a 'default' parent.	In many
+ *	cases the parent is selectable.	The get/set parent calls will also
+ *	switch sources.
+ *
+ *	Many some clocks say always_enabled, but they can be auto idled for
+ *	power savings. They will always be available upon clock request.
+ *
+ *	Several sources are given initial rates which may be wrong, this will
+ *	be fixed up in the init func.
+ *
+ *	Things are broadly separated below by clock domains. It is
+ *	noteworthy that most periferals have dependencies on multiple clock
+ *	domains. Many get their interface clocks from the L4 domain, but get
+ *	functional clocks from fixed sources or other core domain derived
+ *	clocks.
+ *-------------------------------------------------------------------------*/
+
+/* Base external input clocks */
+static struct clk func_32k_ck = {
+	.name		= "func_32k_ck",
+	.rate		= 32000,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES,
+	.recalc		= &propagate_rate,
+};
+
+/* Typical 12/13MHz in standalone mode, will be 26Mhz in chassis mode */
+static struct clk osc_ck = {		/* (*12, *13, 19.2, *26, 38.4)MHz */
+	.name		= "osc_ck",
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_PROPAGATES,
+	.enable		= &omap2_enable_osc_ck,
+	.disable	= &omap2_disable_osc_ck,
+	.recalc		= &omap2_osc_clk_recalc,
+};
+
+/* With out modem likely 12MHz, with modem likely 13MHz */
+static struct clk sys_ck = {		/* (*12, *13, 19.2, 26, 38.4)MHz */
+	.name		= "sys_ck",		/* ~ ref_clk also */
+	.parent		= &osc_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				ALWAYS_ENABLED | RATE_PROPAGATES,
+	.recalc		= &omap2_sys_clk_recalc,
+};
+
+static struct clk alt_ck = {		/* Typical 54M or 48M, may not exist */
+	.name		= "alt_ck",
+	.rate		= 54000000,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES,
+	.recalc		= &propagate_rate,
+};
+
+/*
+ * Analog domain root source clocks
+ */
+
+/* dpll_ck, is broken out in to special cases through clksel */
+/* REVISIT: Rate changes on dpll_ck trigger a full set change.	...
+ * deal with this
+ */
+
+static const struct dpll_data dpll_dd = {
+	.mult_div1_reg		= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
+	.mult_mask		= OMAP24XX_DPLL_MULT_MASK,
+	.div1_mask		= OMAP24XX_DPLL_DIV_MASK,
+};
+
+static struct clk dpll_ck = {
+	.name		= "dpll_ck",
+	.parent		= &sys_ck,		/* Can be func_32k also */
+	.dpll_data	= &dpll_dd,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_PROPAGATES | ALWAYS_ENABLED,
+	.recalc		= &omap2_dpll_recalc,
+	.set_rate	= &omap2_reprogram_dpll,
+};
+
+static struct clk apll96_ck = {
+	.name		= "apll96_ck",
+	.parent		= &sys_ck,
+	.rate		= 96000000,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_FIXED | RATE_PROPAGATES | ENABLE_ON_INIT,
+	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_bit	= OMAP24XX_EN_96M_PLL_SHIFT,
+	.enable		= &omap2_clk_fixed_enable,
+	.disable	= &omap2_clk_fixed_disable,
+	.recalc		= &propagate_rate,
+};
+
+static struct clk apll54_ck = {
+	.name		= "apll54_ck",
+	.parent		= &sys_ck,
+	.rate		= 54000000,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_FIXED | RATE_PROPAGATES | ENABLE_ON_INIT,
+	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_bit	= OMAP24XX_EN_54M_PLL_SHIFT,
+	.enable		= &omap2_clk_fixed_enable,
+	.disable	= &omap2_clk_fixed_disable,
+	.recalc		= &propagate_rate,
+};
+
+/*
+ * PRCM digital base sources
+ */
+
+/* func_54m_ck */
+
+static const struct clksel_rate func_54m_apll54_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate func_54m_alt_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 0 },
+};
+
+static const struct clksel func_54m_clksel[] = {
+	{ .parent = &apll54_ck, .rates = func_54m_apll54_rates, },
+	{ .parent = &alt_ck,	.rates = func_54m_alt_rates, },
+	{ .parent = NULL },
+};
+
+static struct clk func_54m_ck = {
+	.name		= "func_54m_ck",
+	.parent		= &apll54_ck,	/* can also be alt_clk */
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_PROPAGATES | PARENT_CONTROLS_CLOCK,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP24XX_54M_SOURCE,
+	.clksel		= func_54m_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk core_ck = {
+	.name		= "core_ck",
+	.parent		= &dpll_ck,		/* can also be 32k */
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				ALWAYS_ENABLED | RATE_PROPAGATES,
+	.recalc		= &followparent_recalc,
+};
+
+/* func_96m_ck */
+static const struct clksel_rate func_96m_apll96_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate func_96m_alt_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_243X | DEFAULT_RATE },
+	{ .div = 0 },
+};
+
+static const struct clksel func_96m_clksel[] = {
+	{ .parent = &apll96_ck,	.rates = func_96m_apll96_rates },
+	{ .parent = &alt_ck,	.rates = func_96m_alt_rates },
+	{ .parent = NULL }
+};
+
+/* The parent of this clock is not selectable on 2420. */
+static struct clk func_96m_ck = {
+	.name		= "func_96m_ck",
+	.parent		= &apll96_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_PROPAGATES | PARENT_CONTROLS_CLOCK,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP2430_96M_SOURCE,
+	.clksel		= func_96m_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+/* func_48m_ck */
+
+static const struct clksel_rate func_48m_apll96_rates[] = {
+	{ .div = 2, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate func_48m_alt_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 0 },
+};
+
+static const struct clksel func_48m_clksel[] = {
+	{ .parent = &apll96_ck,	.rates = func_48m_apll96_rates },
+	{ .parent = &alt_ck, .rates = func_48m_alt_rates },
+	{ .parent = NULL }
+};
+
+static struct clk func_48m_ck = {
+	.name		= "func_48m_ck",
+	.parent		= &apll96_ck,	 /* 96M or Alt */
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_PROPAGATES | PARENT_CONTROLS_CLOCK,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP24XX_48M_SOURCE,
+	.clksel		= func_48m_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+static struct clk func_12m_ck = {
+	.name		= "func_12m_ck",
+	.parent		= &func_48m_ck,
+	.fixed_div	= 4,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_PROPAGATES | PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_fixed_divisor_recalc,
+};
+
+/* Secure timer, only available in secure mode */
+static struct clk wdt1_osc_ck = {
+	.name		= "ck_wdt1_osc",
+	.parent		= &osc_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.recalc		= &followparent_recalc,
+};
+
+/*
+ * The common_clkout* clksel_rate structs are common to
+ * sys_clkout, sys_clkout_src, sys_clkout2, and sys_clkout2_src.
+ * sys_clkout2_* are 2420-only, so the
+ * clksel_rate flags fields are inaccurate for those clocks. This is
+ * harmless since access to those clocks are gated by the struct clk
+ * flags fields, which mark them as 2420-only.
+ */
+static const struct clksel_rate common_clkout_src_core_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate common_clkout_src_sys_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate common_clkout_src_96m_rates[] = {
+	{ .div = 1, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate common_clkout_src_54m_rates[] = {
+	{ .div = 1, .val = 3, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel common_clkout_src_clksel[] = {
+	{ .parent = &core_ck,	  .rates = common_clkout_src_core_rates },
+	{ .parent = &sys_ck,	  .rates = common_clkout_src_sys_rates },
+	{ .parent = &func_96m_ck, .rates = common_clkout_src_96m_rates },
+	{ .parent = &func_54m_ck, .rates = common_clkout_src_54m_rates },
+	{ .parent = NULL }
+};
+
+static struct clk sys_clkout_src = {
+	.name		= "sys_clkout_src",
+	.parent		= &func_54m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_PROPAGATES,
+	.enable_reg	= OMAP24XX_PRCM_CLKOUT_CTRL,
+	.enable_bit	= OMAP24XX_CLKOUT_EN_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP24XX_PRCM_CLKOUT_CTRL,
+	.clksel_mask	= OMAP24XX_CLKOUT_SOURCE_MASK,
+	.clksel		= common_clkout_src_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+static const struct clksel_rate common_clkout_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 2, .val = 1, .flags = RATE_IN_24XX },
+	{ .div = 4, .val = 2, .flags = RATE_IN_24XX },
+	{ .div = 8, .val = 3, .flags = RATE_IN_24XX },
+	{ .div = 16, .val = 4, .flags = RATE_IN_24XX },
+	{ .div = 0 },
+};
+
+static const struct clksel sys_clkout_clksel[] = {
+	{ .parent = &sys_clkout_src, .rates = common_clkout_rates },
+	{ .parent = NULL }
+};
+
+static struct clk sys_clkout = {
+	.name		= "sys_clkout",
+	.parent		= &sys_clkout_src,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				PARENT_CONTROLS_CLOCK,
+	.clksel_reg	= OMAP24XX_PRCM_CLKOUT_CTRL,
+	.clksel_mask	= OMAP24XX_CLKOUT_DIV_MASK,
+	.clksel		= sys_clkout_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+/* In 2430, new in 2420 ES2 */
+static struct clk sys_clkout2_src = {
+	.name		= "sys_clkout2_src",
+	.parent		= &func_54m_ck,
+	.flags		= CLOCK_IN_OMAP242X | RATE_PROPAGATES,
+	.enable_reg	= OMAP24XX_PRCM_CLKOUT_CTRL,
+	.enable_bit	= OMAP2420_CLKOUT2_EN_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP24XX_PRCM_CLKOUT_CTRL,
+	.clksel_mask	= OMAP2420_CLKOUT2_SOURCE_MASK,
+	.clksel		= common_clkout_src_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+static const struct clksel sys_clkout2_clksel[] = {
+	{ .parent = &sys_clkout2_src, .rates = common_clkout_rates },
+	{ .parent = NULL }
+};
+
+/* In 2430, new in 2420 ES2 */
+static struct clk sys_clkout2 = {
+	.name		= "sys_clkout2",
+	.parent		= &sys_clkout2_src,
+	.flags		= CLOCK_IN_OMAP242X | PARENT_CONTROLS_CLOCK,
+	.clksel_reg	= OMAP24XX_PRCM_CLKOUT_CTRL,
+	.clksel_mask	= OMAP2420_CLKOUT2_DIV_MASK,
+	.clksel		= sys_clkout2_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+static struct clk emul_ck = {
+	.name		= "emul_ck",
+	.parent		= &func_54m_ck,
+	.flags		= CLOCK_IN_OMAP242X,
+	.enable_reg	= OMAP24XX_PRCM_CLKEMUL_CTRL,
+	.enable_bit	= OMAP24XX_EMULATION_EN_SHIFT,
+	.recalc		= &followparent_recalc,
+
+};
+
+/*
+ * MPU clock domain
+ *	Clocks:
+ *		MPU_FCLK, MPU_ICLK
+ *		INT_M_FCLK, INT_M_I_CLK
+ *
+ * - Individual clocks are hardware managed.
+ * - Base divider comes from: CM_CLKSEL_MPU
+ *
+ */
+static const struct clksel_rate mpu_core_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
+	{ .div = 4, .val = 4, .flags = RATE_IN_242X },
+	{ .div = 6, .val = 6, .flags = RATE_IN_242X },
+	{ .div = 8, .val = 8, .flags = RATE_IN_242X },
+	{ .div = 0 },
+};
+
+static const struct clksel mpu_clksel[] = {
+	{ .parent = &core_ck, .rates = mpu_core_rates },
+	{ .parent = NULL }
+};
+
+static struct clk mpu_ck = {	/* Control cpu */
+	.name		= "mpu_ck",
+	.parent		= &core_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				ALWAYS_ENABLED | DELAYED_APP |
+				CONFIG_PARTICIPANT | RATE_PROPAGATES,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP24XX_CLKSEL_MPU_MASK,
+	.clksel		= mpu_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate     = &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+/*
+ * DSP (2430-IVA2.1) (2420-UMA+IVA1) clock domain
+ * Clocks:
+ *	2430: IVA2.1_FCLK (really just DSP_FCLK), IVA2.1_ICLK
+ *	2420: UMA_FCLK, UMA_ICLK, IVA_MPU, IVA_COP
+ *
+ * Won't be too specific here. The core clock comes into this block
+ * it is divided then tee'ed. One branch goes directly to xyz enable
+ * controls. The other branch gets further divided by 2 then possibly
+ * routed into a synchronizer and out of clocks abc.
+ */
+static const struct clksel_rate dsp_fck_core_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
+	{ .div = 3, .val = 3, .flags = RATE_IN_24XX },
+	{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
+	{ .div = 6, .val = 6, .flags = RATE_IN_242X },
+	{ .div = 8, .val = 8, .flags = RATE_IN_242X },
+	{ .div = 12, .val = 12, .flags = RATE_IN_242X },
+	{ .div = 0 },
+};
+
+static const struct clksel dsp_fck_clksel[] = {
+	{ .parent = &core_ck, .rates = dsp_fck_core_rates },
+	{ .parent = NULL }
+};
+
+static struct clk dsp_fck = {
+	.name		= "dsp_fck",
+	.parent		= &core_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | DELAYED_APP |
+				CONFIG_PARTICIPANT | RATE_PROPAGATES,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP24XX_CLKSEL_DSP_MASK,
+	.clksel		= dsp_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+/* DSP interface clock */
+static const struct clksel_rate dsp_irate_ick_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
+	{ .div = 3, .val = 3, .flags = RATE_IN_243X },
+	{ .div = 0 },
+};
+
+static const struct clksel dsp_irate_ick_clksel[] = {
+	{ .parent = &dsp_fck, .rates = dsp_irate_ick_rates },
+	{ .parent = NULL }
+};
+
+/*
+ * This clock does not exist as such in the TRM, but is added to
+ * separate source selection from  XXX
+ */
+static struct clk dsp_irate_ick = {
+	.name		= "dsp_irate_ick",
+	.parent		= &dsp_fck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | DELAYED_APP |
+				CONFIG_PARTICIPANT | PARENT_CONTROLS_CLOCK,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP24XX_CLKSEL_DSP_IF_MASK,
+	.clksel		= dsp_irate_ick_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	      = &omap2_clksel_set_rate
+};
+
+/* 2420 only */
+static struct clk dsp_ick = {
+	.name		= "dsp_ick",	 /* apparently ipi and isp */
+	.parent		= &dsp_irate_ick,
+	.flags		= CLOCK_IN_OMAP242X | DELAYED_APP | CONFIG_PARTICIPANT,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP2420_EN_DSP_IPI_SHIFT,	      /* for ipi */
+};
+
+/* 2430 only - EN_DSP controls both dsp fclk and iclk on 2430 */
+static struct clk iva2_1_ick = {
+	.name		= "iva2_1_ick",
+	.parent		= &dsp_irate_ick,
+	.flags		= CLOCK_IN_OMAP243X | DELAYED_APP | CONFIG_PARTICIPANT,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT,
+};
+
+static struct clk iva1_ifck = {
+	.name		= "iva1_ifck",
+	.parent		= &core_ck,
+	.flags		= CLOCK_IN_OMAP242X | CONFIG_PARTICIPANT |
+				RATE_PROPAGATES | DELAYED_APP,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP2420_EN_IVA_COP_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP2420_CLKSEL_IVA_MASK,
+	.clksel		= dsp_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+/* IVA1 mpu/int/i/f clocks are /2 of parent */
+static struct clk iva1_mpu_int_ifck = {
+	.name		= "iva1_mpu_int_ifck",
+	.parent		= &iva1_ifck,
+	.flags		= CLOCK_IN_OMAP242X,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP2420_EN_IVA_MPU_SHIFT,
+	.fixed_div	= 2,
+	.recalc		= &omap2_fixed_divisor_recalc,
+};
+
+/*
+ * L3 clock domain
+ * L3 clocks are used for both interface and functional clocks to
+ * multiple entities. Some of these clocks are completely managed
+ * by hardware, and some others allow software control. Hardware
+ * managed ones general are based on directly CLK_REQ signals and
+ * various auto idle settings. The functional spec sets many of these
+ * as 'tie-high' for their enables.
+ *
+ * I-CLOCKS:
+ *	L3-Interconnect, SMS, GPMC, SDRC, OCM_RAM, OCM_ROM, SDMA
+ *	CAM, HS-USB.
+ * F-CLOCK
+ *	SSI.
+ *
+ * GPMC memories and SDRC have timing and clock sensitive registers which
+ * may very well need notification when the clock changes. Currently for low
+ * operating points, these are taken care of in sleep.S.
+ */
+static const struct clksel_rate core_l3_core_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
+	{ .div = 2, .val = 2, .flags = RATE_IN_242X },
+	{ .div = 4, .val = 4, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 6, .val = 6, .flags = RATE_IN_24XX },
+	{ .div = 8, .val = 8, .flags = RATE_IN_242X },
+	{ .div = 12, .val = 12, .flags = RATE_IN_242X },
+	{ .div = 16, .val = 16, .flags = RATE_IN_242X },
+	{ .div = 0 }
+};
+
+static const struct clksel core_l3_clksel[] = {
+	{ .parent = &core_ck, .rates = core_l3_core_rates },
+	{ .parent = NULL }
+};
+
+static struct clk core_l3_ck = {	/* Used for ick and fck, interconnect */
+	.name		= "core_l3_ck",
+	.parent		= &core_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				ALWAYS_ENABLED | DELAYED_APP |
+				CONFIG_PARTICIPANT | RATE_PROPAGATES,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP24XX_CLKSEL_L3_MASK,
+	.clksel		= core_l3_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+/* usb_l4_ick */
+static const struct clksel_rate usb_l4_ick_core_l3_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
+	{ .div = 2, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
+	{ .div = 0 }
+};
+
+static const struct clksel usb_l4_ick_clksel[] = {
+	{ .parent = &core_l3_ck, .rates = usb_l4_ick_core_l3_rates },
+	{ .parent = NULL },
+};
+
+static struct clk usb_l4_ick = {	/* FS-USB interface clock */
+	.name		= "usb_l4_ick",
+	.parent		= &core_l3_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				DELAYED_APP | CONFIG_PARTICIPANT,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP24XX_EN_USB_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP24XX_CLKSEL_USB_MASK,
+	.clksel		= usb_l4_ick_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+/*
+ * SSI is in L3 management domain, its direct parent is core not l3,
+ * many core power domain entities are grouped into the L3 clock
+ * domain.
+ * SSI_SSR_FCLK, SSI_SST_FCLK, SSI_L4_CLIK
+ *
+ * ssr = core/1/2/3/4/5, sst = 1/2 ssr.
+ */
+static const struct clksel_rate ssi_ssr_sst_fck_core_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
+	{ .div = 2, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 3, .val = 3, .flags = RATE_IN_24XX },
+	{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
+	{ .div = 5, .val = 5, .flags = RATE_IN_243X },
+	{ .div = 6, .val = 6, .flags = RATE_IN_242X },
+	{ .div = 8, .val = 8, .flags = RATE_IN_242X },
+	{ .div = 0 }
+};
+
+static const struct clksel ssi_ssr_sst_fck_clksel[] = {
+	{ .parent = &core_ck, .rates = ssi_ssr_sst_fck_core_rates },
+	{ .parent = NULL }
+};
+
+static struct clk ssi_ssr_sst_fck = {
+	.name		= "ssi_fck",
+	.parent		= &core_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				DELAYED_APP,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP24XX_EN_SSI_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP24XX_CLKSEL_SSI_MASK,
+	.clksel		= ssi_ssr_sst_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+/*
+ * GFX clock domain
+ *	Clocks:
+ * GFX_FCLK, GFX_ICLK
+ * GFX_CG1(2d), GFX_CG2(3d)
+ *
+ * GFX_FCLK runs from L3, and is divided by (1,2,3,4)
+ * The 2d and 3d clocks run at a hardware determined
+ * divided value of fclk.
+ *
+ */
+/* XXX REVISIT: GFX clock is part of CONFIG_PARTICIPANT, no? doublecheck. */
+
+/* This clksel struct is shared between gfx_3d_fck and gfx_2d_fck */
+static const struct clksel gfx_fck_clksel[] = {
+	{ .parent = &core_l3_ck, .rates = gfx_l3_rates },
+	{ .parent = NULL },
+};
+
+static struct clk gfx_3d_fck = {
+	.name		= "gfx_3d_fck",
+	.parent		= &core_l3_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP24XX_EN_3D_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP_CLKSEL_GFX_MASK,
+	.clksel		= gfx_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+static struct clk gfx_2d_fck = {
+	.name		= "gfx_2d_fck",
+	.parent		= &core_l3_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP24XX_EN_2D_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP_CLKSEL_GFX_MASK,
+	.clksel		= gfx_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+static struct clk gfx_ick = {
+	.name		= "gfx_ick",		/* From l3 */
+	.parent		= &core_l3_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP_EN_GFX_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+/*
+ * Modem clock domain (2430)
+ *	CLOCKS:
+ *		MDM_OSC_CLK
+ *		MDM_ICLK
+ * These clocks are usable in chassis mode only.
+ */
+static const struct clksel_rate mdm_ick_core_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_243X },
+	{ .div = 4, .val = 4, .flags = RATE_IN_243X | DEFAULT_RATE },
+	{ .div = 6, .val = 6, .flags = RATE_IN_243X },
+	{ .div = 9, .val = 9, .flags = RATE_IN_243X },
+	{ .div = 0 }
+};
+
+static const struct clksel mdm_ick_clksel[] = {
+	{ .parent = &core_ck, .rates = mdm_ick_core_rates },
+	{ .parent = NULL }
+};
+
+static struct clk mdm_ick = {		/* used both as a ick and fck */
+	.name		= "mdm_ick",
+	.parent		= &core_ck,
+	.flags		= CLOCK_IN_OMAP243X | DELAYED_APP | CONFIG_PARTICIPANT,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP2430_CM_ICLKEN_MDM_EN_MDM_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP2430_CLKSEL_MDM_MASK,
+	.clksel		= mdm_ick_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+static struct clk mdm_osc_ck = {
+	.name		= "mdm_osc_ck",
+	.parent		= &osc_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP2430_EN_OSC_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+/*
+ * L4 clock management domain
+ *
+ * This domain contains lots of interface clocks from the L4 interface, some
+ * functional clocks.	Fixed APLL functional source clocks are managed in
+ * this domain.
+ */
+static const struct clksel_rate l4_core_l3_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
+	{ .div = 0 }
+};
+
+static const struct clksel l4_clksel[] = {
+	{ .parent = &core_l3_ck, .rates = l4_core_l3_rates },
+	{ .parent = NULL }
+};
+
+static struct clk l4_ck = {		/* used both as an ick and fck */
+	.name		= "l4_ck",
+	.parent		= &core_l3_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				ALWAYS_ENABLED | DELAYED_APP | RATE_PROPAGATES,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP24XX_CLKSEL_L4_MASK,
+	.clksel		= l4_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+static struct clk ssi_l4_ick = {
+	.name		= "ssi_l4_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP24XX_EN_SSI_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+/*
+ * DSS clock domain
+ * CLOCKs:
+ * DSS_L4_ICLK, DSS_L3_ICLK,
+ * DSS_CLK1, DSS_CLK2, DSS_54MHz_CLK
+ *
+ * DSS is both initiator and target.
+ */
+/* XXX Add RATE_NOT_VALIDATED */
+
+static const struct clksel_rate dss1_fck_sys_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate dss1_fck_core_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
+	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
+	{ .div = 3, .val = 3, .flags = RATE_IN_24XX },
+	{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
+	{ .div = 5, .val = 5, .flags = RATE_IN_24XX },
+	{ .div = 6, .val = 6, .flags = RATE_IN_24XX },
+	{ .div = 8, .val = 8, .flags = RATE_IN_24XX },
+	{ .div = 9, .val = 9, .flags = RATE_IN_24XX },
+	{ .div = 12, .val = 12, .flags = RATE_IN_24XX },
+	{ .div = 16, .val = 16, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel dss1_fck_clksel[] = {
+	{ .parent = &sys_ck,  .rates = dss1_fck_sys_rates },
+	{ .parent = &core_ck, .rates = dss1_fck_core_rates },
+	{ .parent = NULL },
+};
+
+static struct clk dss_ick = {		/* Enables both L3,L4 ICLK's */
+	.name		= "dss_ick",
+	.parent		= &l4_ck,	/* really both l3 and l4 */
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_DSS1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dss1_fck = {
+	.name		= "dss1_fck",
+	.parent		= &core_ck,		/* Core or sys */
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				DELAYED_APP,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_DSS1_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP24XX_CLKSEL_DSS1_MASK,
+	.clksel		= dss1_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+static const struct clksel_rate dss2_fck_sys_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate dss2_fck_48m_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel dss2_fck_clksel[] = {
+	{ .parent = &sys_ck,	  .rates = dss2_fck_sys_rates },
+	{ .parent = &func_48m_ck, .rates = dss2_fck_48m_rates },
+	{ .parent = NULL }
+};
+
+static struct clk dss2_fck = {		/* Alt clk used in power management */
+	.name		= "dss2_fck",
+	.parent		= &sys_ck,		/* fixed at sys_ck or 48MHz */
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				DELAYED_APP,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_DSS2_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP24XX_CLKSEL_DSS2_MASK,
+	.clksel		= dss2_fck_clksel,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dss_54m_fck = {	/* Alt clk used in power management */
+	.name		= "dss_54m_fck",	/* 54m tv clk */
+	.parent		= &func_54m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_TV_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+/*
+ * CORE power domain ICLK & FCLK defines.
+ * Many of the these can have more than one possible parent. Entries
+ * here will likely have an L4 interface parent, and may have multiple
+ * functional clock parents.
+ */
+static const struct clksel_rate gpt_alt_rates[] = {
+	{ .div = 1, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel omap24xx_gpt_clksel[] = {
+	{ .parent = &func_32k_ck, .rates = gpt_32k_rates },
+	{ .parent = &sys_ck,	  .rates = gpt_sys_rates },
+	{ .parent = &alt_ck,	  .rates = gpt_alt_rates },
+	{ .parent = NULL },
+};
+
+static struct clk gpt1_ick = {
+	.name		= "gpt1_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP24XX_EN_GPT1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt1_fck = {
+	.name		= "gpt1_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP24XX_EN_GPT1_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT1_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+static struct clk gpt2_ick = {
+	.name		= "gpt2_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt2_fck = {
+	.name		= "gpt2_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT2_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT2_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt3_ick = {
+	.name		= "gpt3_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT3_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt3_fck = {
+	.name		= "gpt3_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT3_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT3_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt4_ick = {
+	.name		= "gpt4_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT4_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt4_fck = {
+	.name		= "gpt4_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT4_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT4_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt5_ick = {
+	.name		= "gpt5_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT5_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt5_fck = {
+	.name		= "gpt5_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT5_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT5_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt6_ick = {
+	.name		= "gpt6_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT6_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt6_fck = {
+	.name		= "gpt6_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT6_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT6_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt7_ick = {
+	.name		= "gpt7_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT7_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt7_fck = {
+	.name		= "gpt7_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT7_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT7_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt8_ick = {
+	.name		= "gpt8_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT8_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt8_fck = {
+	.name		= "gpt8_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT8_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT8_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt9_ick = {
+	.name		= "gpt9_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT9_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt9_fck = {
+	.name		= "gpt9_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT9_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT9_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt10_ick = {
+	.name		= "gpt10_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT10_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt10_fck = {
+	.name		= "gpt10_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT10_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT10_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt11_ick = {
+	.name		= "gpt11_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT11_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt11_fck = {
+	.name		= "gpt11_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT11_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT11_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt12_ick = {
+	.name		= "gpt12_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT12_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt12_fck = {
+	.name		= "gpt12_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT12_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT12_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk mcbsp1_ick = {
+	.name		= "mcbsp1_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_MCBSP1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp1_fck = {
+	.name		= "mcbsp1_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_MCBSP1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp2_ick = {
+	.name		= "mcbsp2_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_MCBSP2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp2_fck = {
+	.name		= "mcbsp2_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_MCBSP2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp3_ick = {
+	.name		= "mcbsp3_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP2430_EN_MCBSP3_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp3_fck = {
+	.name		= "mcbsp3_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP2430_EN_MCBSP3_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp4_ick = {
+	.name		= "mcbsp4_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP2430_EN_MCBSP4_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp4_fck = {
+	.name		= "mcbsp4_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP2430_EN_MCBSP4_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp5_ick = {
+	.name		= "mcbsp5_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP2430_EN_MCBSP5_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp5_fck = {
+	.name		= "mcbsp5_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP2430_EN_MCBSP5_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi1_ick = {
+	.name		= "mcspi_ick",
+	.id		= 1,
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_MCSPI1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi1_fck = {
+	.name		= "mcspi_fck",
+	.id		= 1,
+	.parent		= &func_48m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_MCSPI1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi2_ick = {
+	.name		= "mcspi_ick",
+	.id		= 2,
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_MCSPI2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi2_fck = {
+	.name		= "mcspi_fck",
+	.id		= 2,
+	.parent		= &func_48m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_MCSPI2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi3_ick = {
+	.name		= "mcspi_ick",
+	.id		= 3,
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP2430_EN_MCSPI3_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi3_fck = {
+	.name		= "mcspi_fck",
+	.id		= 3,
+	.parent		= &func_48m_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP2430_EN_MCSPI3_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart1_ick = {
+	.name		= "uart1_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_UART1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart1_fck = {
+	.name		= "uart1_fck",
+	.parent		= &func_48m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_UART1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart2_ick = {
+	.name		= "uart2_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_UART2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart2_fck = {
+	.name		= "uart2_fck",
+	.parent		= &func_48m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_UART2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart3_ick = {
+	.name		= "uart3_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP24XX_EN_UART3_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart3_fck = {
+	.name		= "uart3_fck",
+	.parent		= &func_48m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP24XX_EN_UART3_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpios_ick = {
+	.name		= "gpios_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP24XX_EN_GPIOS_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpios_fck = {
+	.name		= "gpios_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP24XX_EN_GPIOS_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mpu_wdt_ick = {
+	.name		= "mpu_wdt_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP24XX_EN_MPU_WDT_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mpu_wdt_fck = {
+	.name		= "mpu_wdt_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP24XX_EN_MPU_WDT_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sync_32k_ick = {
+	.name		= "sync_32k_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | ENABLE_ON_INIT,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP24XX_EN_32KSYNC_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+static struct clk wdt1_ick = {
+	.name		= "wdt1_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP24XX_EN_WDT1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+static struct clk omapctrl_ick = {
+	.name		= "omapctrl_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | ENABLE_ON_INIT,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP24XX_EN_OMAPCTRL_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+static struct clk icr_ick = {
+	.name		= "icr_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP2430_EN_ICR_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk cam_ick = {
+	.name		= "cam_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_CAM_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk cam_fck = {
+	.name		= "cam_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_CAM_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mailboxes_ick = {
+	.name		= "mailboxes_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_MAILBOXES_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt4_ick = {
+	.name		= "wdt4_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_WDT4_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt4_fck = {
+	.name		= "wdt4_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_WDT4_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt3_ick = {
+	.name		= "wdt3_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP2420_EN_WDT3_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt3_fck = {
+	.name		= "wdt3_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP2420_EN_WDT3_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mspro_ick = {
+	.name		= "mspro_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_MSPRO_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mspro_fck = {
+	.name		= "mspro_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_MSPRO_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmc_ick = {
+	.name		= "mmc_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP2420_EN_MMC_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmc_fck = {
+	.name		= "mmc_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP242X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP2420_EN_MMC_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk fac_ick = {
+	.name		= "fac_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_FAC_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk fac_fck = {
+	.name		= "fac_fck",
+	.parent		= &func_12m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_FAC_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk eac_ick = {
+	.name		= "eac_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP2420_EN_EAC_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk eac_fck = {
+	.name		= "eac_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP242X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP2420_EN_EAC_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk hdq_ick = {
+	.name		= "hdq_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_HDQ_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk hdq_fck = {
+	.name		= "hdq_fck",
+	.parent		= &func_12m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_HDQ_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c2_ick = {
+	.name		= "i2c_ick",
+	.id		= 2,
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP2420_EN_I2C2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c2_fck = {
+	.name		= "i2c_fck",
+	.id		= 2,
+	.parent		= &func_12m_ck,
+	.flags		= CLOCK_IN_OMAP242X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP2420_EN_I2C2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2chs2_fck = {
+	.name		= "i2chs_fck",
+	.id		= 2,
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP2430_EN_I2CHS2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c1_ick = {
+	.name		= "i2c_ick",
+	.id		= 1,
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP2420_EN_I2C1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c1_fck = {
+	.name		= "i2c_fck",
+	.id		= 1,
+	.parent		= &func_12m_ck,
+	.flags		= CLOCK_IN_OMAP242X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP2420_EN_I2C1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2chs1_fck = {
+	.name		= "i2chs_fck",
+	.id		= 1,
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP2430_EN_I2CHS1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpmc_fck = {
+	.name		= "gpmc_fck",
+	.parent		= &core_l3_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | ENABLE_ON_INIT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sdma_fck = {
+	.name		= "sdma_fck",
+	.parent		= &core_l3_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sdma_ick = {
+	.name		= "sdma_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk vlynq_ick = {
+	.name		= "vlynq_ick",
+	.parent		= &core_l3_ck,
+	.flags		= CLOCK_IN_OMAP242X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP2420_EN_VLYNQ_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static const struct clksel_rate vlynq_fck_96m_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_242X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate vlynq_fck_core_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_242X },
+	{ .div = 2, .val = 2, .flags = RATE_IN_242X },
+	{ .div = 3, .val = 3, .flags = RATE_IN_242X },
+	{ .div = 4, .val = 4, .flags = RATE_IN_242X },
+	{ .div = 6, .val = 6, .flags = RATE_IN_242X },
+	{ .div = 8, .val = 8, .flags = RATE_IN_242X },
+	{ .div = 9, .val = 9, .flags = RATE_IN_242X },
+	{ .div = 12, .val = 12, .flags = RATE_IN_242X },
+	{ .div = 16, .val = 16, .flags = RATE_IN_242X | DEFAULT_RATE },
+	{ .div = 18, .val = 18, .flags = RATE_IN_242X },
+	{ .div = 0 }
+};
+
+static const struct clksel vlynq_fck_clksel[] = {
+	{ .parent = &func_96m_ck, .rates = vlynq_fck_96m_rates },
+	{ .parent = &core_ck,	  .rates = vlynq_fck_core_rates },
+	{ .parent = NULL }
+};
+
+static struct clk vlynq_fck = {
+	.name		= "vlynq_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP242X | DELAYED_APP,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP2420_EN_VLYNQ_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP2420_CLKSEL_VLYNQ_MASK,
+	.clksel		= vlynq_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+static struct clk sdrc_ick = {
+	.name		= "sdrc_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X | ENABLE_ON_INIT,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
+	.enable_bit	= OMAP2430_EN_SDRC_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk des_ick = {
+	.name		= "des_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
+	.enable_bit	= OMAP24XX_EN_DES_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sha_ick = {
+	.name		= "sha_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
+	.enable_bit	= OMAP24XX_EN_SHA_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk rng_ick = {
+	.name		= "rng_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
+	.enable_bit	= OMAP24XX_EN_RNG_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk aes_ick = {
+	.name		= "aes_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
+	.enable_bit	= OMAP24XX_EN_AES_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk pka_ick = {
+	.name		= "pka_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
+	.enable_bit	= OMAP24XX_EN_PKA_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usb_fck = {
+	.name		= "usb_fck",
+	.parent		= &func_48m_ck,
+	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP24XX_EN_USB_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usbhs_ick = {
+	.name		= "usbhs_ick",
+	.parent		= &core_l3_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP2430_EN_USBHS_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchs1_ick = {
+	.name		= "mmchs_ick",
+	.id		= 1,
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP2430_EN_MMCHS1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchs1_fck = {
+	.name		= "mmchs_fck",
+	.id		= 1,
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP2430_EN_MMCHS1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchs2_ick = {
+	.name		= "mmchs_ick",
+	.id		= 2,
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP2430_EN_MMCHS2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchs2_fck = {
+	.name		= "mmchs_fck",
+	.id		= 2,
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP2430_EN_MMCHS2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio5_ick = {
+	.name		= "gpio5_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP2430_EN_GPIO5_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio5_fck = {
+	.name		= "gpio5_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP2430_EN_GPIO5_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mdm_intc_ick = {
+	.name		= "mdm_intc_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP2430_EN_MDM_INTC_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchsdb1_fck = {
+	.name		= "mmchsdb_fck",
+	.id		= 1,
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP2430_EN_MMCHSDB1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchsdb2_fck = {
+	.name		= "mmchsdb_fck",
+	.id		= 2,
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP2430_EN_MMCHSDB2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+/*
+ * This clock is a composite clock which does entire set changes then
+ * forces a rebalance. It keys on the MPU speed, but it really could
+ * be any key speed part of a set in the rate table.
+ *
+ * to really change a set, you need memory table sets which get changed
+ * in sram, pre-notifiers & post notifiers, changing the top set, without
+ * having low level display recalc's won't work... this is why dpm notifiers
+ * work, isr's off, walk a list of clocks already _off_ and not messing with
+ * the bus.
+ *
+ * This clock should have no parent. It embodies the entire upper level
+ * active set. A parent will mess up some of the init also.
+ */
+static struct clk virt_prcm_set = {
+	.name		= "virt_prcm_set",
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				VIRTUAL_CLOCK | ALWAYS_ENABLED | DELAYED_APP,
+	.parent		= &mpu_ck,	/* Indexed by mpu speed, no parent */
+	.recalc		= &omap2_table_mpu_recalc,	/* sets are keyed on mpu rate */
+	.set_rate	= &omap2_select_table_rate,
+	.round_rate	= &omap2_round_to_table_rate,
+};
+
+static struct clk *onchip_24xx_clks[] __initdata = {
+	/* external root sources */
+	&func_32k_ck,
+	&osc_ck,
+	&sys_ck,
+	&alt_ck,
+	/* internal analog sources */
+	&dpll_ck,
+	&apll96_ck,
+	&apll54_ck,
+	/* internal prcm root sources */
+	&func_54m_ck,
+	&core_ck,
+	&func_96m_ck,
+	&func_48m_ck,
+	&func_12m_ck,
+	&wdt1_osc_ck,
+	&sys_clkout_src,
+	&sys_clkout,
+	&sys_clkout2_src,
+	&sys_clkout2,
+	&emul_ck,
+	/* mpu domain clocks */
+	&mpu_ck,
+	/* dsp domain clocks */
+	&dsp_fck,
+	&dsp_irate_ick,
+	&dsp_ick,		/* 242x */
+	&iva2_1_ick,		/* 243x */
+	&iva1_ifck,		/* 242x */
+	&iva1_mpu_int_ifck,	/* 242x */
+	/* GFX domain clocks */
+	&gfx_3d_fck,
+	&gfx_2d_fck,
+	&gfx_ick,
+	/* Modem domain clocks */
+	&mdm_ick,
+	&mdm_osc_ck,
+	/* DSS domain clocks */
+	&dss_ick,
+	&dss1_fck,
+	&dss2_fck,
+	&dss_54m_fck,
+	/* L3 domain clocks */
+	&core_l3_ck,
+	&ssi_ssr_sst_fck,
+	&usb_l4_ick,
+	/* L4 domain clocks */
+	&l4_ck,			/* used as both core_l4 and wu_l4 */
+	&ssi_l4_ick,
+	/* virtual meta-group clock */
+	&virt_prcm_set,
+	/* general l4 interface ck, multi-parent functional clk */
+	&gpt1_ick,
+	&gpt1_fck,
+	&gpt2_ick,
+	&gpt2_fck,
+	&gpt3_ick,
+	&gpt3_fck,
+	&gpt4_ick,
+	&gpt4_fck,
+	&gpt5_ick,
+	&gpt5_fck,
+	&gpt6_ick,
+	&gpt6_fck,
+	&gpt7_ick,
+	&gpt7_fck,
+	&gpt8_ick,
+	&gpt8_fck,
+	&gpt9_ick,
+	&gpt9_fck,
+	&gpt10_ick,
+	&gpt10_fck,
+	&gpt11_ick,
+	&gpt11_fck,
+	&gpt12_ick,
+	&gpt12_fck,
+	&mcbsp1_ick,
+	&mcbsp1_fck,
+	&mcbsp2_ick,
+	&mcbsp2_fck,
+	&mcbsp3_ick,
+	&mcbsp3_fck,
+	&mcbsp4_ick,
+	&mcbsp4_fck,
+	&mcbsp5_ick,
+	&mcbsp5_fck,
+	&mcspi1_ick,
+	&mcspi1_fck,
+	&mcspi2_ick,
+	&mcspi2_fck,
+	&mcspi3_ick,
+	&mcspi3_fck,
+	&uart1_ick,
+	&uart1_fck,
+	&uart2_ick,
+	&uart2_fck,
+	&uart3_ick,
+	&uart3_fck,
+	&gpios_ick,
+	&gpios_fck,
+	&mpu_wdt_ick,
+	&mpu_wdt_fck,
+	&sync_32k_ick,
+	&wdt1_ick,
+	&omapctrl_ick,
+	&icr_ick,
+	&cam_fck,
+	&cam_ick,
+	&mailboxes_ick,
+	&wdt4_ick,
+	&wdt4_fck,
+	&wdt3_ick,
+	&wdt3_fck,
+	&mspro_ick,
+	&mspro_fck,
+	&mmc_ick,
+	&mmc_fck,
+	&fac_ick,
+	&fac_fck,
+	&eac_ick,
+	&eac_fck,
+	&hdq_ick,
+	&hdq_fck,
+	&i2c1_ick,
+	&i2c1_fck,
+	&i2chs1_fck,
+	&i2c2_ick,
+	&i2c2_fck,
+	&i2chs2_fck,
+	&gpmc_fck,
+	&sdma_fck,
+	&sdma_ick,
+	&vlynq_ick,
+	&vlynq_fck,
+	&sdrc_ick,
+	&des_ick,
+	&sha_ick,
+	&rng_ick,
+	&aes_ick,
+	&pka_ick,
+	&usb_fck,
+	&usbhs_ick,
+	&mmchs1_ick,
+	&mmchs1_fck,
+	&mmchs2_ick,
+	&mmchs2_fck,
+	&gpio5_ick,
+	&gpio5_fck,
+	&mdm_intc_ick,
+	&mmchsdb1_fck,
+	&mmchsdb2_fck,
+};
+
+#endif
+
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
new file mode 100644
index 0000000..b42bdd6
--- /dev/null
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -0,0 +1,235 @@
+/*
+ * OMAP3-specific clock framework functions
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Copyright (C) 2007 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ *
+ * Parts of this code are based on code written by
+ * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/arch/clock.h>
+#include <asm/arch/sram.h>
+#include <asm/div64.h>
+#include <asm/bitops.h>
+
+#include "memory.h"
+#include "clock.h"
+#include "clock34xx.h"
+#include "prm.h"
+#include "prm-regbits-34xx.h"
+#include "cm.h"
+#include "cm-regbits-34xx.h"
+
+/* CM_CLKEN_PLL*.EN* bit values */
+#define DPLL_LOCKED		0x7
+
+/**
+ * omap3_dpll_recalc - recalculate DPLL rate
+ * @clk: DPLL struct clk
+ *
+ * Recalculate and propagate the DPLL rate.
+ */
+static void omap3_dpll_recalc(struct clk *clk)
+{
+	clk->rate = omap2_get_dpll_rate(clk);
+
+	propagate_rate(clk);
+}
+
+/**
+ * omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate
+ * @clk: DPLL output struct clk
+ *
+ * Using parent clock DPLL data, look up DPLL state.  If locked, set our
+ * rate to the dpll_clk * 2; otherwise, just use dpll_clk.
+ */
+static void omap3_clkoutx2_recalc(struct clk *clk)
+{
+	const struct dpll_data *dd;
+	u32 v;
+	struct clk *pclk;
+
+	/* Walk up the parents of clk, looking for a DPLL */
+	pclk = clk->parent;
+	while (pclk && !pclk->dpll_data)
+		pclk = pclk->parent;
+
+	/* clk does not have a DPLL as a parent? */
+	WARN_ON(!pclk);
+
+	dd = pclk->dpll_data;
+
+	WARN_ON(!dd->control_reg || !dd->enable_mask);
+
+	v = __raw_readl(dd->control_reg) & dd->enable_mask;
+	v >>= __ffs(dd->enable_mask);
+	if (v != DPLL_LOCKED)
+		clk->rate = clk->parent->rate;
+	else
+		clk->rate = clk->parent->rate * 2;
+
+	if (clk->flags & RATE_PROPAGATES)
+		propagate_rate(clk);
+}
+
+/*
+ * As it is structured now, this will prevent an OMAP2/3 multiboot
+ * kernel from compiling.  This will need further attention.
+ */
+#if defined(CONFIG_ARCH_OMAP3)
+
+static struct clk_functions omap2_clk_functions = {
+	.clk_enable		= omap2_clk_enable,
+	.clk_disable		= omap2_clk_disable,
+	.clk_round_rate		= omap2_clk_round_rate,
+	.clk_set_rate		= omap2_clk_set_rate,
+	.clk_set_parent		= omap2_clk_set_parent,
+	.clk_disable_unused	= omap2_clk_disable_unused,
+};
+
+/*
+ * Set clocks for bypass mode for reboot to work.
+ */
+void omap2_clk_prepare_for_reboot(void)
+{
+	/* REVISIT: Not ready for 343x */
+#if 0
+	u32 rate;
+
+	if (vclk == NULL || sclk == NULL)
+		return;
+
+	rate = clk_get_rate(sclk);
+	clk_set_rate(vclk, rate);
+#endif
+}
+
+/* REVISIT: Move this init stuff out into clock.c */
+
+/*
+ * Switch the MPU rate if specified on cmdline.
+ * We cannot do this early until cmdline is parsed.
+ */
+static int __init omap2_clk_arch_init(void)
+{
+	if (!mpurate)
+		return -EINVAL;
+
+	/* REVISIT: not yet ready for 343x */
+#if 0
+	if (omap2_select_table_rate(&virt_prcm_set, mpurate))
+		printk(KERN_ERR "Could not find matching MPU rate\n");
+#endif
+
+	recalculate_root_clocks();
+
+	printk(KERN_INFO "Switched to new clocking rate (Crystal/DPLL3/MPU): "
+	       "%ld.%01ld/%ld/%ld MHz\n",
+	       (osc_sys_ck.rate / 1000000), (osc_sys_ck.rate / 100000) % 10,
+	       (core_ck.rate / 1000000), (dpll1_fck.rate / 1000000)) ;
+
+	return 0;
+}
+arch_initcall(omap2_clk_arch_init);
+
+int __init omap2_clk_init(void)
+{
+	/* struct prcm_config *prcm; */
+	struct clk **clkp;
+	/* u32 clkrate; */
+	u32 cpu_clkflg;
+
+	/* REVISIT: Ultimately this will be used for multiboot */
+#if 0
+	if (cpu_is_omap242x()) {
+		cpu_mask = RATE_IN_242X;
+		cpu_clkflg = CLOCK_IN_OMAP242X;
+		clkp = onchip_24xx_clks;
+	} else if (cpu_is_omap2430()) {
+		cpu_mask = RATE_IN_243X;
+		cpu_clkflg = CLOCK_IN_OMAP243X;
+		clkp = onchip_24xx_clks;
+	}
+#endif
+	if (cpu_is_omap34xx()) {
+		cpu_mask = RATE_IN_343X;
+		cpu_clkflg = CLOCK_IN_OMAP343X;
+		clkp = onchip_34xx_clks;
+
+		/*
+		 * Update this if there are further clock changes between ES2
+		 * and production parts
+		 */
+		if (is_sil_rev_equal_to(OMAP3430_REV_ES1_0)) {
+			/* No 3430ES1-only rates exist, so no RATE_IN_3430ES1 */
+			cpu_clkflg |= CLOCK_IN_OMAP3430ES1;
+		} else {
+			cpu_mask |= RATE_IN_3430ES2;
+			cpu_clkflg |= CLOCK_IN_OMAP3430ES2;
+		}
+	}
+
+	clk_init(&omap2_clk_functions);
+
+	for (clkp = onchip_34xx_clks;
+	     clkp < onchip_34xx_clks + ARRAY_SIZE(onchip_34xx_clks);
+	     clkp++) {
+		if ((*clkp)->flags & cpu_clkflg)
+			clk_register(*clkp);
+	}
+
+	/* REVISIT: Not yet ready for OMAP3 */
+#if 0
+	/* Check the MPU rate set by bootloader */
+	clkrate = omap2_get_dpll_rate_24xx(&dpll_ck);
+	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
+		if (!(prcm->flags & cpu_mask))
+			continue;
+		if (prcm->xtal_speed != sys_ck.rate)
+			continue;
+		if (prcm->dpll_speed <= clkrate)
+			 break;
+	}
+	curr_prcm_set = prcm;
+#endif
+
+	recalculate_root_clocks();
+
+	printk(KERN_INFO "Clocking rate (Crystal/DPLL/ARM core): "
+	       "%ld.%01ld/%ld/%ld MHz\n",
+	       (osc_sys_ck.rate / 1000000), (osc_sys_ck.rate / 100000) % 10,
+	       (core_ck.rate / 1000000), (arm_fck.rate / 1000000));
+
+	/*
+	 * Only enable those clocks we will need, let the drivers
+	 * enable other clocks as necessary
+	 */
+	clk_enable_init_clocks();
+
+	/* Avoid sleeping during omap2_clk_prepare_for_reboot() */
+	/* REVISIT: not yet ready for 343x */
+#if 0
+	vclk = clk_get(NULL, "virt_prcm_set");
+	sclk = clk_get(NULL, "sys_ck");
+#endif
+	return 0;
+}
+
+#endif
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
new file mode 100644
index 0000000..cf4644a
--- /dev/null
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -0,0 +1,3009 @@
+/*
+ * OMAP3 clock framework
+ *
+ * Virtual clocks are introduced as a convenient tools.
+ * They are sources for other clocks and not supposed
+ * to be requested from drivers directly.
+ *
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
+#define __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
+
+#include <asm/arch/control.h>
+
+#include "clock.h"
+#include "cm.h"
+#include "cm-regbits-34xx.h"
+#include "prm.h"
+#include "prm-regbits-34xx.h"
+
+static void omap3_dpll_recalc(struct clk *clk);
+static void omap3_clkoutx2_recalc(struct clk *clk);
+
+/*
+ * DPLL1 supplies clock to the MPU.
+ * DPLL2 supplies clock to the IVA2.
+ * DPLL3 supplies CORE domain clocks.
+ * DPLL4 supplies peripheral clocks.
+ * DPLL5 supplies other peripheral clocks (USBHOST, USIM).
+ */
+
+/* PRM CLOCKS */
+
+/* According to timer32k.c, this is a 32768Hz clock, not a 32000Hz clock. */
+static struct clk omap_32k_fck = {
+	.name		= "omap_32k_fck",
+	.rate		= 32768,
+	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES |
+				ALWAYS_ENABLED,
+	.recalc		= &propagate_rate,
+};
+
+static struct clk secure_32k_fck = {
+	.name		= "secure_32k_fck",
+	.rate		= 32768,
+	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES |
+				ALWAYS_ENABLED,
+	.recalc		= &propagate_rate,
+};
+
+/* Virtual source clocks for osc_sys_ck */
+static struct clk virt_12m_ck = {
+	.name		= "virt_12m_ck",
+	.rate		= 12000000,
+	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES |
+				ALWAYS_ENABLED,
+	.recalc		= &propagate_rate,
+};
+
+static struct clk virt_13m_ck = {
+	.name		= "virt_13m_ck",
+	.rate		= 13000000,
+	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES |
+				ALWAYS_ENABLED,
+	.recalc		= &propagate_rate,
+};
+
+static struct clk virt_16_8m_ck = {
+	.name		= "virt_16_8m_ck",
+	.rate		= 16800000,
+	.flags		= CLOCK_IN_OMAP3430ES2 | RATE_FIXED | RATE_PROPAGATES |
+				ALWAYS_ENABLED,
+	.recalc		= &propagate_rate,
+};
+
+static struct clk virt_19_2m_ck = {
+	.name		= "virt_19_2m_ck",
+	.rate		= 19200000,
+	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES |
+				ALWAYS_ENABLED,
+	.recalc		= &propagate_rate,
+};
+
+static struct clk virt_26m_ck = {
+	.name		= "virt_26m_ck",
+	.rate		= 26000000,
+	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES |
+				ALWAYS_ENABLED,
+	.recalc		= &propagate_rate,
+};
+
+static struct clk virt_38_4m_ck = {
+	.name		= "virt_38_4m_ck",
+	.rate		= 38400000,
+	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES |
+				ALWAYS_ENABLED,
+	.recalc		= &propagate_rate,
+};
+
+static const struct clksel_rate osc_sys_12m_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate osc_sys_13m_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate osc_sys_16_8m_rates[] = {
+	{ .div = 1, .val = 5, .flags = RATE_IN_3430ES2 | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate osc_sys_19_2m_rates[] = {
+	{ .div = 1, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate osc_sys_26m_rates[] = {
+	{ .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate osc_sys_38_4m_rates[] = {
+	{ .div = 1, .val = 4, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel osc_sys_clksel[] = {
+	{ .parent = &virt_12m_ck,   .rates = osc_sys_12m_rates },
+	{ .parent = &virt_13m_ck,   .rates = osc_sys_13m_rates },
+	{ .parent = &virt_16_8m_ck, .rates = osc_sys_16_8m_rates },
+	{ .parent = &virt_19_2m_ck, .rates = osc_sys_19_2m_rates },
+	{ .parent = &virt_26m_ck,   .rates = osc_sys_26m_rates },
+	{ .parent = &virt_38_4m_ck, .rates = osc_sys_38_4m_rates },
+	{ .parent = NULL },
+};
+
+/* Oscillator clock */
+/* 12, 13, 16.8, 19.2, 26, or 38.4 MHz */
+static struct clk osc_sys_ck = {
+	.name		= "osc_sys_ck",
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP3430_PRM_CLKSEL,
+	.clksel_mask	= OMAP3430_SYS_CLKIN_SEL_MASK,
+	.clksel		= osc_sys_clksel,
+	/* REVISIT: deal with autoextclkmode? */
+	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES |
+				ALWAYS_ENABLED,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel_rate div2_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
+	{ .div = 0 }
+};
+
+static const struct clksel sys_clksel[] = {
+	{ .parent = &osc_sys_ck, .rates = div2_rates },
+	{ .parent = NULL }
+};
+
+/* Latency: this clock is only enabled after PRM_CLKSETUP.SETUP_TIME */
+/* Feeds DPLLs - divided first by PRM_CLKSRC_CTRL.SYSCLKDIV? */
+static struct clk sys_ck = {
+	.name		= "sys_ck",
+	.parent		= &osc_sys_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP3430_PRM_CLKSRC_CTRL,
+	.clksel_mask	= OMAP_SYSCLKDIV_MASK,
+	.clksel		= sys_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk sys_altclk = {
+	.name		= "sys_altclk",
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.recalc		= &propagate_rate,
+};
+
+/* Optional external clock input for some McBSPs */
+static struct clk mcbsp_clks = {
+	.name		= "mcbsp_clks",
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.recalc		= &propagate_rate,
+};
+
+/* PRM EXTERNAL CLOCK OUTPUT */
+
+static struct clk sys_clkout1 = {
+	.name		= "sys_clkout1",
+	.parent		= &osc_sys_ck,
+	.enable_reg	= OMAP3430_PRM_CLKOUT_CTRL,
+	.enable_bit	= OMAP3430_CLKOUT_EN_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+/* DPLLS */
+
+/* CM CLOCKS */
+
+static const struct clksel_rate dpll_bypass_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate dpll_locked_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate div16_dpll_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
+	{ .div = 3, .val = 3, .flags = RATE_IN_343X },
+	{ .div = 4, .val = 4, .flags = RATE_IN_343X },
+	{ .div = 5, .val = 5, .flags = RATE_IN_343X },
+	{ .div = 6, .val = 6, .flags = RATE_IN_343X },
+	{ .div = 7, .val = 7, .flags = RATE_IN_343X },
+	{ .div = 8, .val = 8, .flags = RATE_IN_343X },
+	{ .div = 9, .val = 9, .flags = RATE_IN_343X },
+	{ .div = 10, .val = 10, .flags = RATE_IN_343X },
+	{ .div = 11, .val = 11, .flags = RATE_IN_343X },
+	{ .div = 12, .val = 12, .flags = RATE_IN_343X },
+	{ .div = 13, .val = 13, .flags = RATE_IN_343X },
+	{ .div = 14, .val = 14, .flags = RATE_IN_343X },
+	{ .div = 15, .val = 15, .flags = RATE_IN_343X },
+	{ .div = 16, .val = 16, .flags = RATE_IN_343X },
+	{ .div = 0 }
+};
+
+/* DPLL1 */
+/* MPU clock source */
+/* Type: DPLL */
+static const struct dpll_data dpll1_dd = {
+	.mult_div1_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL),
+	.mult_mask	= OMAP3430_MPU_DPLL_MULT_MASK,
+	.div1_mask	= OMAP3430_MPU_DPLL_DIV_MASK,
+	.control_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKEN_PLL),
+	.enable_mask	= OMAP3430_EN_MPU_DPLL_MASK,
+	.auto_recal_bit	= OMAP3430_EN_MPU_DPLL_DRIFTGUARD_SHIFT,
+	.recal_en_bit	= OMAP3430_MPU_DPLL_RECAL_EN_SHIFT,
+	.recal_st_bit	= OMAP3430_MPU_DPLL_ST_SHIFT,
+};
+
+static struct clk dpll1_ck = {
+	.name		= "dpll1_ck",
+	.parent		= &sys_ck,
+	.dpll_data	= &dpll1_dd,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.recalc		= &omap3_dpll_recalc,
+};
+
+/*
+ * This virtual clock provides the CLKOUTX2 output from the DPLL if the
+ * DPLL isn't bypassed.
+ */
+static struct clk dpll1_x2_ck = {
+	.name		= "dpll1_x2_ck",
+	.parent		= &dpll1_ck,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+/* On DPLL1, unlike other DPLLs, the divider is downstream from CLKOUTX2 */
+static const struct clksel div16_dpll1_x2m2_clksel[] = {
+	{ .parent = &dpll1_x2_ck, .rates = div16_dpll_rates },
+	{ .parent = NULL }
+};
+
+/*
+ * Does not exist in the TRM - needed to separate the M2 divider from
+ * bypass selection in mpu_ck
+ */
+static struct clk dpll1_x2m2_ck = {
+	.name		= "dpll1_x2m2_ck",
+	.parent		= &dpll1_x2_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL2_PLL),
+	.clksel_mask	= OMAP3430_MPU_DPLL_CLKOUT_DIV_MASK,
+	.clksel		= div16_dpll1_x2m2_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* DPLL2 */
+/* IVA2 clock source */
+/* Type: DPLL */
+
+static const struct dpll_data dpll2_dd = {
+	.mult_div1_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL),
+	.mult_mask	= OMAP3430_IVA2_DPLL_MULT_MASK,
+	.div1_mask	= OMAP3430_IVA2_DPLL_DIV_MASK,
+	.control_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKEN_PLL),
+	.enable_mask	= OMAP3430_EN_IVA2_DPLL_MASK,
+	.auto_recal_bit	= OMAP3430_EN_IVA2_DPLL_DRIFTGUARD_SHIFT,
+	.recal_en_bit	= OMAP3430_PRM_IRQENABLE_MPU_IVA2_DPLL_RECAL_EN_SHIFT,
+	.recal_st_bit	= OMAP3430_PRM_IRQSTATUS_MPU_IVA2_DPLL_ST_SHIFT,
+};
+
+static struct clk dpll2_ck = {
+	.name		= "dpll2_ck",
+	.parent		= &sys_ck,
+	.dpll_data	= &dpll2_dd,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.recalc		= &omap3_dpll_recalc,
+};
+
+static const struct clksel div16_dpll2_m2x2_clksel[] = {
+	{ .parent = &dpll2_ck, .rates = div16_dpll_rates },
+	{ .parent = NULL }
+};
+
+/*
+ * The TRM is conflicted on whether IVA2 clock comes from DPLL2 CLKOUT
+ * or CLKOUTX2. CLKOUT seems most plausible.
+ */
+static struct clk dpll2_m2_ck = {
+	.name		= "dpll2_m2_ck",
+	.parent		= &dpll2_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD,
+					  OMAP3430_CM_CLKSEL2_PLL),
+	.clksel_mask	= OMAP3430_IVA2_DPLL_CLKOUT_DIV_MASK,
+	.clksel		= div16_dpll2_m2x2_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* DPLL3 */
+/* Source clock for all interfaces and for some device fclks */
+/* Type: DPLL */
+static const struct dpll_data dpll3_dd = {
+	.mult_div1_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
+	.mult_mask	= OMAP3430_CORE_DPLL_MULT_MASK,
+	.div1_mask	= OMAP3430_CORE_DPLL_DIV_MASK,
+	.control_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_mask	= OMAP3430_EN_CORE_DPLL_MASK,
+	.auto_recal_bit	= OMAP3430_EN_CORE_DPLL_DRIFTGUARD_SHIFT,
+	.recal_en_bit	= OMAP3430_CORE_DPLL_RECAL_EN_SHIFT,
+	.recal_st_bit	= OMAP3430_CORE_DPLL_ST_SHIFT,
+};
+
+static struct clk dpll3_ck = {
+	.name		= "dpll3_ck",
+	.parent		= &sys_ck,
+	.dpll_data	= &dpll3_dd,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.recalc		= &omap3_dpll_recalc,
+};
+
+/*
+ * This virtual clock provides the CLKOUTX2 output from the DPLL if the
+ * DPLL isn't bypassed
+ */
+static struct clk dpll3_x2_ck = {
+	.name		= "dpll3_x2_ck",
+	.parent		= &dpll3_ck,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+static const struct clksel_rate div31_dpll3_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
+	{ .div = 3, .val = 3, .flags = RATE_IN_3430ES2 },
+	{ .div = 4, .val = 4, .flags = RATE_IN_3430ES2 },
+	{ .div = 5, .val = 5, .flags = RATE_IN_3430ES2 },
+	{ .div = 6, .val = 6, .flags = RATE_IN_3430ES2 },
+	{ .div = 7, .val = 7, .flags = RATE_IN_3430ES2 },
+	{ .div = 8, .val = 8, .flags = RATE_IN_3430ES2 },
+	{ .div = 9, .val = 9, .flags = RATE_IN_3430ES2 },
+	{ .div = 10, .val = 10, .flags = RATE_IN_3430ES2 },
+	{ .div = 11, .val = 11, .flags = RATE_IN_3430ES2 },
+	{ .div = 12, .val = 12, .flags = RATE_IN_3430ES2 },
+	{ .div = 13, .val = 13, .flags = RATE_IN_3430ES2 },
+	{ .div = 14, .val = 14, .flags = RATE_IN_3430ES2 },
+	{ .div = 15, .val = 15, .flags = RATE_IN_3430ES2 },
+	{ .div = 16, .val = 16, .flags = RATE_IN_3430ES2 },
+	{ .div = 17, .val = 17, .flags = RATE_IN_3430ES2 },
+	{ .div = 18, .val = 18, .flags = RATE_IN_3430ES2 },
+	{ .div = 19, .val = 19, .flags = RATE_IN_3430ES2 },
+	{ .div = 20, .val = 20, .flags = RATE_IN_3430ES2 },
+	{ .div = 21, .val = 21, .flags = RATE_IN_3430ES2 },
+	{ .div = 22, .val = 22, .flags = RATE_IN_3430ES2 },
+	{ .div = 23, .val = 23, .flags = RATE_IN_3430ES2 },
+	{ .div = 24, .val = 24, .flags = RATE_IN_3430ES2 },
+	{ .div = 25, .val = 25, .flags = RATE_IN_3430ES2 },
+	{ .div = 26, .val = 26, .flags = RATE_IN_3430ES2 },
+	{ .div = 27, .val = 27, .flags = RATE_IN_3430ES2 },
+	{ .div = 28, .val = 28, .flags = RATE_IN_3430ES2 },
+	{ .div = 29, .val = 29, .flags = RATE_IN_3430ES2 },
+	{ .div = 30, .val = 30, .flags = RATE_IN_3430ES2 },
+	{ .div = 31, .val = 31, .flags = RATE_IN_3430ES2 },
+	{ .div = 0 },
+};
+
+static const struct clksel div31_dpll3m2_clksel[] = {
+	{ .parent = &dpll3_ck, .rates = div31_dpll3_rates },
+	{ .parent = NULL }
+};
+
+/*
+ * DPLL3 output M2
+ * REVISIT: This DPLL output divider must be changed in SRAM, so until
+ * that code is ready, this should remain a 'read-only' clksel clock.
+ */
+static struct clk dpll3_m2_ck = {
+	.name		= "dpll3_m2_ck",
+	.parent		= &dpll3_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_CORE_DPLL_CLKOUT_DIV_MASK,
+	.clksel		= div31_dpll3m2_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel core_ck_clksel[] = {
+	{ .parent = &sys_ck,      .rates = dpll_bypass_rates },
+	{ .parent = &dpll3_m2_ck, .rates = dpll_locked_rates },
+	{ .parent = NULL }
+};
+
+static struct clk core_ck = {
+	.name		= "core_ck",
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
+	.clksel_mask	= OMAP3430_ST_CORE_CLK,
+	.clksel		= core_ck_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel dpll3_m2x2_ck_clksel[] = {
+	{ .parent = &sys_ck,      .rates = dpll_bypass_rates },
+	{ .parent = &dpll3_x2_ck, .rates = dpll_locked_rates },
+	{ .parent = NULL }
+};
+
+static struct clk dpll3_m2x2_ck = {
+	.name		= "dpll3_m2x2_ck",
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
+	.clksel_mask	= OMAP3430_ST_CORE_CLK,
+	.clksel		= dpll3_m2x2_ck_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* The PWRDN bit is apparently only available on 3430ES2 and above */
+static const struct clksel div16_dpll3_clksel[] = {
+	{ .parent = &dpll3_ck, .rates = div16_dpll_rates },
+	{ .parent = NULL }
+};
+
+/* This virtual clock is the source for dpll3_m3x2_ck */
+static struct clk dpll3_m3_ck = {
+	.name		= "dpll3_m3_ck",
+	.parent		= &dpll3_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_DIV_DPLL3_MASK,
+	.clksel		= div16_dpll3_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* The PWRDN bit is apparently only available on 3430ES2 and above */
+static struct clk dpll3_m3x2_ck = {
+	.name		= "dpll3_m3x2_ck",
+	.parent		= &dpll3_m3_ck,
+	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_bit	= OMAP3430_PWRDN_EMU_CORE_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE,
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+static const struct clksel emu_core_alwon_ck_clksel[] = {
+	{ .parent = &sys_ck,        .rates = dpll_bypass_rates },
+	{ .parent = &dpll3_m3x2_ck, .rates = dpll_locked_rates },
+	{ .parent = NULL }
+};
+
+static struct clk emu_core_alwon_ck = {
+	.name		= "emu_core_alwon_ck",
+	.parent		= &dpll3_m3x2_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
+	.clksel_mask	= OMAP3430_ST_CORE_CLK,
+	.clksel		= emu_core_alwon_ck_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* DPLL4 */
+/* Supplies 96MHz, 54Mhz TV DAC, DSS fclk, CAM sensor clock, emul trace clk */
+/* Type: DPLL */
+static const struct dpll_data dpll4_dd = {
+	.mult_div1_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL2),
+	.mult_mask	= OMAP3430_PERIPH_DPLL_MULT_MASK,
+	.div1_mask	= OMAP3430_PERIPH_DPLL_DIV_MASK,
+	.control_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_mask	= OMAP3430_EN_PERIPH_DPLL_MASK,
+	.auto_recal_bit	= OMAP3430_EN_PERIPH_DPLL_DRIFTGUARD_SHIFT,
+	.recal_en_bit	= OMAP3430_PERIPH_DPLL_RECAL_EN_SHIFT,
+	.recal_st_bit	= OMAP3430_PERIPH_DPLL_ST_SHIFT,
+};
+
+static struct clk dpll4_ck = {
+	.name		= "dpll4_ck",
+	.parent		= &sys_ck,
+	.dpll_data	= &dpll4_dd,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.recalc		= &omap3_dpll_recalc,
+};
+
+/*
+ * This virtual clock provides the CLKOUTX2 output from the DPLL if the
+ * DPLL isn't bypassed --
+ * XXX does this serve any downstream clocks?
+ */
+static struct clk dpll4_x2_ck = {
+	.name		= "dpll4_x2_ck",
+	.parent		= &dpll4_ck,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+static const struct clksel div16_dpll4_clksel[] = {
+	{ .parent = &dpll4_ck, .rates = div16_dpll_rates },
+	{ .parent = NULL }
+};
+
+/* This virtual clock is the source for dpll4_m2x2_ck */
+static struct clk dpll4_m2_ck = {
+	.name		= "dpll4_m2_ck",
+	.parent		= &dpll4_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430_CM_CLKSEL3),
+	.clksel_mask	= OMAP3430_DIV_96M_MASK,
+	.clksel		= div16_dpll4_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* The PWRDN bit is apparently only available on 3430ES2 and above */
+static struct clk dpll4_m2x2_ck = {
+	.name		= "dpll4_m2x2_ck",
+	.parent		= &dpll4_m2_ck,
+	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_bit	= OMAP3430_PWRDN_96M_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE,
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+static const struct clksel omap_96m_alwon_fck_clksel[] = {
+	{ .parent = &sys_ck,        .rates = dpll_bypass_rates },
+	{ .parent = &dpll4_m2x2_ck, .rates = dpll_locked_rates },
+	{ .parent = NULL }
+};
+
+static struct clk omap_96m_alwon_fck = {
+	.name		= "omap_96m_alwon_fck",
+	.parent		= &dpll4_m2x2_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
+	.clksel_mask	= OMAP3430_ST_PERIPH_CLK,
+	.clksel		= omap_96m_alwon_fck_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				 PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk omap_96m_fck = {
+	.name		= "omap_96m_fck",
+	.parent		= &omap_96m_alwon_fck,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &followparent_recalc,
+};
+
+static const struct clksel cm_96m_fck_clksel[] = {
+	{ .parent = &sys_ck,        .rates = dpll_bypass_rates },
+	{ .parent = &dpll4_m2x2_ck, .rates = dpll_locked_rates },
+	{ .parent = NULL }
+};
+
+static struct clk cm_96m_fck = {
+	.name		= "cm_96m_fck",
+	.parent		= &dpll4_m2x2_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
+	.clksel_mask	= OMAP3430_ST_PERIPH_CLK,
+	.clksel		= cm_96m_fck_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* This virtual clock is the source for dpll4_m3x2_ck */
+static struct clk dpll4_m3_ck = {
+	.name		= "dpll4_m3_ck",
+	.parent		= &dpll4_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_TV_MASK,
+	.clksel		= div16_dpll4_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* The PWRDN bit is apparently only available on 3430ES2 and above */
+static struct clk dpll4_m3x2_ck = {
+	.name		= "dpll4_m3x2_ck",
+	.parent		= &dpll4_m3_ck,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_bit	= OMAP3430_PWRDN_TV_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE,
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+static const struct clksel virt_omap_54m_fck_clksel[] = {
+	{ .parent = &sys_ck,        .rates = dpll_bypass_rates },
+	{ .parent = &dpll4_m3x2_ck, .rates = dpll_locked_rates },
+	{ .parent = NULL }
+};
+
+static struct clk virt_omap_54m_fck = {
+	.name		= "virt_omap_54m_fck",
+	.parent		= &dpll4_m3x2_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
+	.clksel_mask	= OMAP3430_ST_PERIPH_CLK,
+	.clksel		= virt_omap_54m_fck_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel_rate omap_54m_d4m3x2_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate omap_54m_alt_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel omap_54m_clksel[] = {
+	{ .parent = &virt_omap_54m_fck, .rates = omap_54m_d4m3x2_rates },
+	{ .parent = &sys_altclk,    .rates = omap_54m_alt_rates },
+	{ .parent = NULL }
+};
+
+static struct clk omap_54m_fck = {
+	.name		= "omap_54m_fck",
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_SOURCE_54M,
+	.clksel		= omap_54m_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel_rate omap_48m_96md2_rates[] = {
+	{ .div = 2, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate omap_48m_alt_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel omap_48m_clksel[] = {
+	{ .parent = &cm_96m_fck, .rates = omap_48m_96md2_rates },
+	{ .parent = &sys_altclk, .rates = omap_48m_alt_rates },
+	{ .parent = NULL }
+};
+
+static struct clk omap_48m_fck = {
+	.name		= "omap_48m_fck",
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_SOURCE_48M,
+	.clksel		= omap_48m_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk omap_12m_fck = {
+	.name		= "omap_12m_fck",
+	.parent		= &omap_48m_fck,
+	.fixed_div	= 4,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_fixed_divisor_recalc,
+};
+
+/* This virstual clock is the source for dpll4_m4x2_ck */
+static struct clk dpll4_m4_ck = {
+	.name		= "dpll4_m4_ck",
+	.parent		= &dpll4_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_DSS1_MASK,
+	.clksel		= div16_dpll4_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* The PWRDN bit is apparently only available on 3430ES2 and above */
+static struct clk dpll4_m4x2_ck = {
+	.name		= "dpll4_m4x2_ck",
+	.parent		= &dpll4_m4_ck,
+	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_bit	= OMAP3430_PWRDN_CAM_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE,
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+/* This virtual clock is the source for dpll4_m5x2_ck */
+static struct clk dpll4_m5_ck = {
+	.name		= "dpll4_m5_ck",
+	.parent		= &dpll4_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_CAM_MASK,
+	.clksel		= div16_dpll4_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* The PWRDN bit is apparently only available on 3430ES2 and above */
+static struct clk dpll4_m5x2_ck = {
+	.name		= "dpll4_m5x2_ck",
+	.parent		= &dpll4_m5_ck,
+	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_bit	= OMAP3430_PWRDN_CAM_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE,
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+/* This virtual clock is the source for dpll4_m6x2_ck */
+static struct clk dpll4_m6_ck = {
+	.name		= "dpll4_m6_ck",
+	.parent		= &dpll4_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_DIV_DPLL4_MASK,
+	.clksel		= div16_dpll4_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* The PWRDN bit is apparently only available on 3430ES2 and above */
+static struct clk dpll4_m6x2_ck = {
+	.name		= "dpll4_m6x2_ck",
+	.parent		= &dpll4_m6_ck,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_bit	= OMAP3430_PWRDN_EMU_PERIPH_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE,
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+static struct clk emu_per_alwon_ck = {
+	.name		= "emu_per_alwon_ck",
+	.parent		= &dpll4_m6x2_ck,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &followparent_recalc,
+};
+
+/* DPLL5 */
+/* Supplies 120MHz clock, USIM source clock */
+/* Type: DPLL */
+/* 3430ES2 only */
+static const struct dpll_data dpll5_dd = {
+	.mult_div1_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL4),
+	.mult_mask	= OMAP3430ES2_PERIPH2_DPLL_MULT_MASK,
+	.div1_mask	= OMAP3430ES2_PERIPH2_DPLL_DIV_MASK,
+	.control_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKEN2),
+	.enable_mask	= OMAP3430ES2_EN_PERIPH2_DPLL_MASK,
+	.auto_recal_bit	= OMAP3430ES2_EN_PERIPH2_DPLL_DRIFTGUARD_SHIFT,
+	.recal_en_bit	= OMAP3430ES2_SND_PERIPH_DPLL_RECAL_EN_SHIFT,
+	.recal_st_bit	= OMAP3430ES2_SND_PERIPH_DPLL_ST_SHIFT,
+};
+
+static struct clk dpll5_ck = {
+	.name		= "dpll5_ck",
+	.parent		= &sys_ck,
+	.dpll_data	= &dpll5_dd,
+	.flags		= CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES |
+				ALWAYS_ENABLED,
+	.recalc		= &omap3_dpll_recalc,
+};
+
+static const struct clksel div16_dpll5_clksel[] = {
+	{ .parent = &dpll5_ck, .rates = div16_dpll_rates },
+	{ .parent = NULL }
+};
+
+static struct clk dpll5_m2_ck = {
+	.name		= "dpll5_m2_ck",
+	.parent		= &dpll5_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL5),
+	.clksel_mask	= OMAP3430ES2_DIV_120M_MASK,
+	.clksel		= div16_dpll5_clksel,
+	.flags		= CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel omap_120m_fck_clksel[] = {
+	{ .parent = &sys_ck,      .rates = dpll_bypass_rates },
+	{ .parent = &dpll5_m2_ck, .rates = dpll_locked_rates },
+	{ .parent = NULL }
+};
+
+static struct clk omap_120m_fck = {
+	.name		= "omap_120m_fck",
+	.parent		= &dpll5_m2_ck,
+	.init           = &omap2_init_clksel_parent,
+	.clksel_reg     = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST2),
+	.clksel_mask    = OMAP3430ES2_ST_PERIPH2_CLK_MASK,
+	.clksel         = omap_120m_fck_clksel,
+	.flags		= CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc         = &omap2_clksel_recalc,
+};
+
+/* CM EXTERNAL CLOCK OUTPUTS */
+
+static const struct clksel_rate clkout2_src_core_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate clkout2_src_sys_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate clkout2_src_96m_rates[] = {
+	{ .div = 1, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate clkout2_src_54m_rates[] = {
+	{ .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel clkout2_src_clksel[] = {
+	{ .parent = &core_ck,		  .rates = clkout2_src_core_rates },
+	{ .parent = &sys_ck,		  .rates = clkout2_src_sys_rates },
+	{ .parent = &omap_96m_alwon_fck,  .rates = clkout2_src_96m_rates },
+	{ .parent = &omap_54m_fck,	  .rates = clkout2_src_54m_rates },
+	{ .parent = NULL }
+};
+
+static struct clk clkout2_src_ck = {
+	.name		= "clkout2_src_ck",
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP3430_CM_CLKOUT_CTRL,
+	.enable_bit	= OMAP3430_CLKOUT2_EN_SHIFT,
+	.clksel_reg	= OMAP3430_CM_CLKOUT_CTRL,
+	.clksel_mask	= OMAP3430_CLKOUT2SOURCE_MASK,
+	.clksel		= clkout2_src_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel_rate sys_clkout2_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 2, .val = 1, .flags = RATE_IN_343X },
+	{ .div = 4, .val = 2, .flags = RATE_IN_343X },
+	{ .div = 8, .val = 3, .flags = RATE_IN_343X },
+	{ .div = 16, .val = 4, .flags = RATE_IN_343X },
+	{ .div = 0 },
+};
+
+static const struct clksel sys_clkout2_clksel[] = {
+	{ .parent = &clkout2_src_ck, .rates = sys_clkout2_rates },
+	{ .parent = NULL },
+};
+
+static struct clk sys_clkout2 = {
+	.name		= "sys_clkout2",
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP3430_CM_CLKOUT_CTRL,
+	.clksel_mask	= OMAP3430_CLKOUT2_DIV_MASK,
+	.clksel		= sys_clkout2_clksel,
+	.flags		= CLOCK_IN_OMAP343X | PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* CM OUTPUT CLOCKS */
+
+static struct clk corex2_fck = {
+	.name		= "corex2_fck",
+	.parent		= &dpll3_m2x2_ck,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &followparent_recalc,
+};
+
+/* DPLL power domain clock controls */
+
+static const struct clksel div2_core_clksel[] = {
+	{ .parent = &core_ck, .rates = div2_rates },
+	{ .parent = NULL }
+};
+
+/*
+ * REVISIT: Are these in DPLL power domain or CM power domain? docs
+ * may be inconsistent here?
+ */
+static struct clk dpll1_fck = {
+	.name		= "dpll1_fck",
+	.parent		= &core_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL),
+	.clksel_mask	= OMAP3430_MPU_CLK_SRC_MASK,
+	.clksel		= div2_core_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/*
+ * MPU clksel:
+ * If DPLL1 is locked, mpu_ck derives from DPLL1; otherwise, mpu_ck
+ * derives from the high-frequency bypass clock originating from DPLL3,
+ * called 'dpll1_fck'
+ */
+static const struct clksel mpu_clksel[] = {
+	{ .parent = &dpll1_fck,     .rates = dpll_bypass_rates },
+	{ .parent = &dpll1_x2m2_ck, .rates = dpll_locked_rates },
+	{ .parent = NULL }
+};
+
+static struct clk mpu_ck = {
+	.name		= "mpu_ck",
+	.parent		= &dpll1_x2m2_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL),
+	.clksel_mask	= OMAP3430_ST_MPU_CLK_MASK,
+	.clksel		= mpu_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* arm_fck is divided by two when DPLL1 locked; otherwise, passthrough mpu_ck */
+static const struct clksel_rate arm_fck_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 2, .val = 1, .flags = RATE_IN_343X },
+	{ .div = 0 },
+};
+
+static const struct clksel arm_fck_clksel[] = {
+	{ .parent = &mpu_ck, .rates = arm_fck_rates },
+	{ .parent = NULL }
+};
+
+static struct clk arm_fck = {
+	.name		= "arm_fck",
+	.parent		= &mpu_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL),
+	.clksel_mask	= OMAP3430_ST_MPU_CLK_MASK,
+	.clksel		= arm_fck_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/*
+ * REVISIT: This clock is never specifically defined in the 3430 TRM,
+ * although it is referenced - so this is a guess
+ */
+static struct clk emu_mpu_alwon_ck = {
+	.name		= "emu_mpu_alwon_ck",
+	.parent		= &mpu_ck,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dpll2_fck = {
+	.name		= "dpll2_fck",
+	.parent		= &core_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL),
+	.clksel_mask	= OMAP3430_IVA2_CLK_SRC_MASK,
+	.clksel		= div2_core_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/*
+ * IVA2 clksel:
+ * If DPLL2 is locked, iva2_ck derives from DPLL2; otherwise, iva2_ck
+ * derives from the high-frequency bypass clock originating from DPLL3,
+ * called 'dpll2_fck'
+ */
+
+static const struct clksel iva2_clksel[] = {
+	{ .parent = &dpll2_fck,   .rates = dpll_bypass_rates },
+	{ .parent = &dpll2_m2_ck, .rates = dpll_locked_rates },
+	{ .parent = NULL }
+};
+
+static struct clk iva2_ck = {
+	.name		= "iva2_ck",
+	.parent		= &dpll2_m2_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD,
+					  OMAP3430_CM_IDLEST_PLL),
+	.clksel_mask	= OMAP3430_ST_IVA2_CLK_MASK,
+	.clksel		= iva2_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* Common interface clocks */
+
+static struct clk l3_ick = {
+	.name		= "l3_ick",
+	.parent		= &core_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_L3_MASK,
+	.clksel		= div2_core_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel div2_l3_clksel[] = {
+	{ .parent = &l3_ick, .rates = div2_rates },
+	{ .parent = NULL }
+};
+
+static struct clk l4_ick = {
+	.name		= "l4_ick",
+	.parent		= &l3_ick,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_L4_MASK,
+	.clksel		= div2_l3_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+
+};
+
+static const struct clksel div2_l4_clksel[] = {
+	{ .parent = &l4_ick, .rates = div2_rates },
+	{ .parent = NULL }
+};
+
+static struct clk rm_ick = {
+	.name		= "rm_ick",
+	.parent		= &l4_ick,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_RM_MASK,
+	.clksel		= div2_l4_clksel,
+	.flags		= CLOCK_IN_OMAP343X | PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* GFX power domain */
+
+/* GFX clocks are in 3430ES1 only. 3430ES2 and later uses the SGX instead */
+
+static const struct clksel gfx_l3_clksel[] = {
+	{ .parent = &l3_ick, .rates = gfx_l3_rates },
+	{ .parent = NULL }
+};
+
+static struct clk gfx_l3_fck = {
+	.name		= "gfx_l3_fck",
+	.parent		= &l3_ick,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP_EN_GFX_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP_CLKSEL_GFX_MASK,
+	.clksel		= gfx_l3_clksel,
+	.flags		= CLOCK_IN_OMAP3430ES1 | RATE_PROPAGATES,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gfx_l3_ick = {
+	.name		= "gfx_l3_ick",
+	.parent		= &l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP_EN_GFX_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES1,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gfx_cg1_ck = {
+	.name		= "gfx_cg1_ck",
+	.parent		= &gfx_l3_fck, /* REVISIT: correct? */
+	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430ES1_EN_2D_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES1,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gfx_cg2_ck = {
+	.name		= "gfx_cg2_ck",
+	.parent		= &gfx_l3_fck, /* REVISIT: correct? */
+	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430ES1_EN_3D_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES1,
+	.recalc		= &followparent_recalc,
+};
+
+/* SGX power domain - 3430ES2 only */
+
+static const struct clksel_rate sgx_core_rates[] = {
+	{ .div = 3, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 4, .val = 1, .flags = RATE_IN_343X },
+	{ .div = 6, .val = 2, .flags = RATE_IN_343X },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate sgx_96m_rates[] = {
+	{ .div = 1,  .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 },
+};
+
+static const struct clksel sgx_clksel[] = {
+	{ .parent = &core_ck,	 .rates = sgx_core_rates },
+	{ .parent = &cm_96m_fck, .rates = sgx_96m_rates },
+	{ .parent = NULL },
+};
+
+static struct clk sgx_fck = {
+	.name		= "sgx_fck",
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430ES2_EN_SGX_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430ES2_CLKSEL_SGX_MASK,
+	.clksel		= sgx_clksel,
+	.flags		= CLOCK_IN_OMAP3430ES2,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk sgx_ick = {
+	.name		= "sgx_ick",
+	.parent		= &l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430ES2_EN_SGX_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES2,
+	.recalc		= &followparent_recalc,
+};
+
+/* CORE power domain */
+
+static struct clk d2d_26m_fck = {
+	.name		= "d2d_26m_fck",
+	.parent		= &sys_ck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430ES1_EN_D2D_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES1,
+	.recalc		= &followparent_recalc,
+};
+
+static const struct clksel omap343x_gpt_clksel[] = {
+	{ .parent = &omap_32k_fck, .rates = gpt_32k_rates },
+	{ .parent = &sys_ck,	   .rates = gpt_sys_rates },
+	{ .parent = NULL}
+};
+
+static struct clk gpt10_fck = {
+	.name		= "gpt10_fck",
+	.parent		= &sys_ck,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_GPT10_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT10_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt11_fck = {
+	.name		= "gpt11_fck",
+	.parent		= &sys_ck,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_GPT11_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT11_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk cpefuse_fck = {
+	.name		= "cpefuse_fck",
+	.parent		= &sys_ck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
+	.enable_bit	= OMAP3430ES2_EN_CPEFUSE_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES2,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk ts_fck = {
+	.name		= "ts_fck",
+	.parent		= &omap_32k_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
+	.enable_bit	= OMAP3430ES2_EN_TS_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES2,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usbtll_fck = {
+	.name		= "usbtll_fck",
+	.parent		= &omap_120m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
+	.enable_bit	= OMAP3430ES2_EN_USBTLL_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES2,
+	.recalc		= &followparent_recalc,
+};
+
+/* CORE 96M FCLK-derived clocks */
+
+static struct clk core_96m_fck = {
+	.name		= "core_96m_fck",
+	.parent		= &omap_96m_fck,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchs3_fck = {
+	.name		= "mmchs_fck",
+	.id		= 3,
+	.parent		= &core_96m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430ES2_EN_MMC3_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES2,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchs2_fck = {
+	.name		= "mmchs_fck",
+	.id		= 2,
+	.parent		= &core_96m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MMC2_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mspro_fck = {
+	.name		= "mspro_fck",
+	.parent		= &core_96m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MSPRO_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchs1_fck = {
+	.name		= "mmchs_fck",
+	.id		= 1,
+	.parent		= &core_96m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MMC1_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c3_fck = {
+	.name		= "i2c_fck",
+	.id		= 3,
+	.parent		= &core_96m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_I2C3_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c2_fck = {
+	.name		= "i2c_fck",
+	.id 		= 2,
+	.parent		= &core_96m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_I2C2_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c1_fck = {
+	.name		= "i2c_fck",
+	.id		= 1,
+	.parent		= &core_96m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_I2C1_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+/*
+ * MCBSP 1 & 5 get their 96MHz clock from core_96m_fck;
+ * MCBSP 2, 3, 4 get their 96MHz clock from per_96m_fck.
+ */
+static const struct clksel_rate common_mcbsp_96m_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate common_mcbsp_mcbsp_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel mcbsp_15_clksel[] = {
+	{ .parent = &core_96m_fck, .rates = common_mcbsp_96m_rates },
+	{ .parent = &mcbsp_clks,   .rates = common_mcbsp_mcbsp_rates },
+	{ .parent = NULL }
+};
+
+static struct clk mcbsp5_fck = {
+	.name		= "mcbsp5_fck",
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MCBSP5_SHIFT,
+	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1),
+	.clksel_mask	= OMAP2_MCBSP5_CLKS_MASK,
+	.clksel		= mcbsp_15_clksel,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk mcbsp1_fck = {
+	.name		= "mcbsp1_fck",
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MCBSP1_SHIFT,
+	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0),
+	.clksel_mask	= OMAP2_MCBSP1_CLKS_MASK,
+	.clksel		= mcbsp_15_clksel,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* CORE_48M_FCK-derived clocks */
+
+static struct clk core_48m_fck = {
+	.name		= "core_48m_fck",
+	.parent		= &omap_48m_fck,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi4_fck = {
+	.name		= "mcspi_fck",
+	.id		= 4,
+	.parent		= &core_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MCSPI4_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi3_fck = {
+	.name		= "mcspi_fck",
+	.id		= 3,
+	.parent		= &core_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MCSPI3_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi2_fck = {
+	.name		= "mcspi_fck",
+	.id		= 2,
+	.parent		= &core_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MCSPI2_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi1_fck = {
+	.name		= "mcspi_fck",
+	.id		= 1,
+	.parent		= &core_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MCSPI1_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart2_fck = {
+	.name		= "uart2_fck",
+	.parent		= &core_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_UART2_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart1_fck = {
+	.name		= "uart1_fck",
+	.parent		= &core_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_UART1_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk fshostusb_fck = {
+	.name		= "fshostusb_fck",
+	.parent		= &core_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430ES1_EN_FSHOSTUSB_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES1,
+	.recalc		= &followparent_recalc,
+};
+
+/* CORE_12M_FCK based clocks */
+
+static struct clk core_12m_fck = {
+	.name		= "core_12m_fck",
+	.parent		= &omap_12m_fck,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk hdq_fck = {
+	.name		= "hdq_fck",
+	.parent		= &core_12m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_HDQ_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+/* DPLL3-derived clock */
+
+static const struct clksel_rate ssi_ssr_corex2_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
+	{ .div = 3, .val = 3, .flags = RATE_IN_343X },
+	{ .div = 4, .val = 4, .flags = RATE_IN_343X },
+	{ .div = 6, .val = 6, .flags = RATE_IN_343X },
+	{ .div = 8, .val = 8, .flags = RATE_IN_343X },
+	{ .div = 0 }
+};
+
+static const struct clksel ssi_ssr_clksel[] = {
+	{ .parent = &corex2_fck, .rates = ssi_ssr_corex2_rates },
+	{ .parent = NULL }
+};
+
+static struct clk ssi_ssr_fck = {
+	.name		= "ssi_ssr_fck",
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_SSI_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_SSI_MASK,
+	.clksel		= ssi_ssr_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk ssi_sst_fck = {
+	.name		= "ssi_sst_fck",
+	.parent		= &ssi_ssr_fck,
+	.fixed_div	= 2,
+	.flags		= CLOCK_IN_OMAP343X | PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_fixed_divisor_recalc,
+};
+
+
+
+/* CORE_L3_ICK based clocks */
+
+static struct clk core_l3_ick = {
+	.name		= "core_l3_ick",
+	.parent		= &l3_ick,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk hsotgusb_ick = {
+	.name		= "hsotgusb_ick",
+	.parent		= &core_l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_HSOTGUSB_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sdrc_ick = {
+	.name		= "sdrc_ick",
+	.parent		= &core_l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_SDRC_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X | ENABLE_ON_INIT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpmc_fck = {
+	.name		= "gpmc_fck",
+	.parent		= &core_l3_ick,
+	.flags		= CLOCK_IN_OMAP343X | PARENT_CONTROLS_CLOCK |
+				ENABLE_ON_INIT,
+	.recalc		= &followparent_recalc,
+};
+
+/* SECURITY_L3_ICK based clocks */
+
+static struct clk security_l3_ick = {
+	.name		= "security_l3_ick",
+	.parent		= &l3_ick,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk pka_ick = {
+	.name		= "pka_ick",
+	.parent		= &security_l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP3430_EN_PKA_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+/* CORE_L4_ICK based clocks */
+
+static struct clk core_l4_ick = {
+	.name		= "core_l4_ick",
+	.parent		= &l4_ick,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usbtll_ick = {
+	.name		= "usbtll_ick",
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
+	.enable_bit	= OMAP3430ES2_EN_USBTLL_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES2,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchs3_ick = {
+	.name		= "mmchs_ick",
+	.id		= 3,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430ES2_EN_MMC3_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES2,
+	.recalc		= &followparent_recalc,
+};
+
+/* Intersystem Communication Registers - chassis mode only */
+static struct clk icr_ick = {
+	.name		= "icr_ick",
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_ICR_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk aes2_ick = {
+	.name		= "aes2_ick",
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_AES2_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sha12_ick = {
+	.name		= "sha12_ick",
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_SHA12_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk des2_ick = {
+	.name		= "des2_ick",
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_DES2_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchs2_ick = {
+	.name		= "mmchs_ick",
+	.id		= 2,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MMC2_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchs1_ick = {
+	.name		= "mmchs_ick",
+	.id		= 1,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MMC1_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mspro_ick = {
+	.name		= "mspro_ick",
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MSPRO_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk hdq_ick = {
+	.name		= "hdq_ick",
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_HDQ_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi4_ick = {
+	.name		= "mcspi_ick",
+	.id		= 4,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MCSPI4_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi3_ick = {
+	.name		= "mcspi_ick",
+	.id		= 3,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MCSPI3_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi2_ick = {
+	.name		= "mcspi_ick",
+	.id		= 2,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MCSPI2_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi1_ick = {
+	.name		= "mcspi_ick",
+	.id		= 1,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MCSPI1_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c3_ick = {
+	.name		= "i2c_ick",
+	.id		= 3,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_I2C3_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c2_ick = {
+	.name		= "i2c_ick",
+	.id		= 2,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_I2C2_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c1_ick = {
+	.name		= "i2c_ick",
+	.id		= 1,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_I2C1_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart2_ick = {
+	.name		= "uart2_ick",
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_UART2_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart1_ick = {
+	.name		= "uart1_ick",
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_UART1_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt11_ick = {
+	.name		= "gpt11_ick",
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_GPT11_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt10_ick = {
+	.name		= "gpt10_ick",
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_GPT10_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp5_ick = {
+	.name		= "mcbsp5_ick",
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MCBSP5_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp1_ick = {
+	.name		= "mcbsp1_ick",
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MCBSP1_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk fac_ick = {
+	.name		= "fac_ick",
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430ES1_EN_FAC_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES1,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mailboxes_ick = {
+	.name		= "mailboxes_ick",
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MAILBOXES_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk omapctrl_ick = {
+	.name		= "omapctrl_ick",
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_OMAPCTRL_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X | ENABLE_ON_INIT,
+	.recalc		= &followparent_recalc,
+};
+
+/* SSI_L4_ICK based clocks */
+
+static struct clk ssi_l4_ick = {
+	.name		= "ssi_l4_ick",
+	.parent		= &l4_ick,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk ssi_ick = {
+	.name		= "ssi_ick",
+	.parent		= &ssi_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_SSI_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+/* REVISIT: Technically the TRM claims that this is CORE_CLK based,
+ * but l4_ick makes more sense to me */
+
+static const struct clksel usb_l4_clksel[] = {
+	{ .parent = &l4_ick, .rates = div2_rates },
+	{ .parent = NULL },
+};
+
+static struct clk usb_l4_ick = {
+	.name		= "usb_l4_ick",
+	.parent		= &l4_ick,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430ES1_EN_FSHOSTUSB_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430ES1_CLKSEL_FSHOSTUSB_MASK,
+	.clksel		= usb_l4_clksel,
+	.flags		= CLOCK_IN_OMAP3430ES1,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* XXX MDM_INTC_ICK, SAD2D_ICK ?? */
+
+/* SECURITY_L4_ICK2 based clocks */
+
+static struct clk security_l4_ick2 = {
+	.name		= "security_l4_ick2",
+	.parent		= &l4_ick,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk aes1_ick = {
+	.name		= "aes1_ick",
+	.parent		= &security_l4_ick2,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP3430_EN_AES1_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk rng_ick = {
+	.name		= "rng_ick",
+	.parent		= &security_l4_ick2,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP3430_EN_RNG_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sha11_ick = {
+	.name		= "sha11_ick",
+	.parent		= &security_l4_ick2,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP3430_EN_SHA11_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk des1_ick = {
+	.name		= "des1_ick",
+	.parent		= &security_l4_ick2,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP3430_EN_DES1_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+/* DSS */
+static const struct clksel dss1_alwon_fck_clksel[] = {
+	{ .parent = &sys_ck,        .rates = dpll_bypass_rates },
+	{ .parent = &dpll4_m4x2_ck, .rates = dpll_locked_rates },
+	{ .parent = NULL }
+};
+
+static struct clk dss1_alwon_fck = {
+	.name		= "dss1_alwon_fck",
+	.parent		= &dpll4_m4x2_ck,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_DSS1_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
+	.clksel_mask	= OMAP3430_ST_PERIPH_CLK,
+	.clksel		= dss1_alwon_fck_clksel,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk dss_tv_fck = {
+	.name		= "dss_tv_fck",
+	.parent		= &omap_54m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_TV_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dss_96m_fck = {
+	.name		= "dss_96m_fck",
+	.parent		= &omap_96m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_TV_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dss2_alwon_fck = {
+	.name		= "dss2_alwon_fck",
+	.parent		= &sys_ck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_DSS2_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dss_ick = {
+	/* Handles both L3 and L4 clocks */
+	.name		= "dss_ick",
+	.parent		= &l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+/* CAM */
+
+static const struct clksel cam_mclk_clksel[] = {
+	{ .parent = &sys_ck,        .rates = dpll_bypass_rates },
+	{ .parent = &dpll4_m5x2_ck, .rates = dpll_locked_rates },
+	{ .parent = NULL }
+};
+
+static struct clk cam_mclk = {
+	.name		= "cam_mclk",
+	.parent		= &dpll4_m5x2_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
+	.clksel_mask	= OMAP3430_ST_PERIPH_CLK,
+	.clksel		= cam_mclk_clksel,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_CAM_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk cam_l3_ick = {
+	.name		= "cam_l3_ick",
+	.parent		= &l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_CAM_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk cam_l4_ick = {
+	.name		= "cam_l4_ick",
+	.parent		= &l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_CAM_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+/* USBHOST - 3430ES2 only */
+
+static struct clk usbhost_120m_fck = {
+	.name		= "usbhost_120m_fck",
+	.parent		= &omap_120m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430ES2_EN_USBHOST2_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES2,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usbhost_48m_fck = {
+	.name		= "usbhost_48m_fck",
+	.parent		= &omap_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430ES2_EN_USBHOST1_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES2,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usbhost_l3_ick = {
+	.name		= "usbhost_l3_ick",
+	.parent		= &l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430ES2_EN_USBHOST_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES2,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usbhost_l4_ick = {
+	.name		= "usbhost_l4_ick",
+	.parent		= &l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430ES2_EN_USBHOST_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES2,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usbhost_sar_fck = {
+	.name		= "usbhost_sar_fck",
+	.parent		= &osc_sys_ck,
+	.enable_reg	= OMAP_PRM_REGADDR(OMAP3430ES2_USBHOST_MOD, PM_PWSTCTRL),
+	.enable_bit	= OMAP3430ES2_SAVEANDRESTORE_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES2,
+	.recalc		= &followparent_recalc,
+};
+
+/* WKUP */
+
+static const struct clksel_rate usim_96m_rates[] = {
+	{ .div = 2,  .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 4,  .val = 4, .flags = RATE_IN_343X },
+	{ .div = 8,  .val = 5, .flags = RATE_IN_343X },
+	{ .div = 10, .val = 6, .flags = RATE_IN_343X },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate usim_120m_rates[] = {
+	{ .div = 4,  .val = 7,	.flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 8,  .val = 8,	.flags = RATE_IN_343X },
+	{ .div = 16, .val = 9,	.flags = RATE_IN_343X },
+	{ .div = 20, .val = 10, .flags = RATE_IN_343X },
+	{ .div = 0 },
+};
+
+static const struct clksel usim_clksel[] = {
+	{ .parent = &omap_96m_fck,	.rates = usim_96m_rates },
+	{ .parent = &omap_120m_fck,	.rates = usim_120m_rates },
+	{ .parent = &sys_ck,		.rates = div2_rates },
+	{ .parent = NULL },
+};
+
+/* 3430ES2 only */
+static struct clk usim_fck = {
+	.name		= "usim_fck",
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430ES2_EN_USIMOCP_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430ES2_CLKSEL_USIMOCP_MASK,
+	.clksel		= usim_clksel,
+	.flags		= CLOCK_IN_OMAP3430ES2,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt1_fck = {
+	.name		= "gpt1_fck",
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT1_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT1_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk wkup_32k_fck = {
+	.name		= "wkup_32k_fck",
+	.parent		= &omap_32k_fck,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio1_fck = {
+	.name		= "gpio1_fck",
+	.parent		= &wkup_32k_fck,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO1_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt2_fck = {
+	.name		= "wdt2_fck",
+	.parent		= &wkup_32k_fck,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_WDT2_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wkup_l4_ick = {
+	.name		= "wkup_l4_ick",
+	.parent		= &sys_ck,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.recalc		= &followparent_recalc,
+};
+
+/* 3430ES2 only */
+/* Never specifically named in the TRM, so we have to infer a likely name */
+static struct clk usim_ick = {
+	.name		= "usim_ick",
+	.parent		= &wkup_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430ES2_EN_USIMOCP_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES2,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt2_ick = {
+	.name		= "wdt2_ick",
+	.parent		= &wkup_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_WDT2_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt1_ick = {
+	.name		= "wdt1_ick",
+	.parent		= &wkup_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_WDT1_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio1_ick = {
+	.name		= "gpio1_ick",
+	.parent		= &wkup_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO1_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk omap_32ksync_ick = {
+	.name		= "omap_32ksync_ick",
+	.parent		= &wkup_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_32KSYNC_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt12_ick = {
+	.name		= "gpt12_ick",
+	.parent		= &wkup_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT12_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt1_ick = {
+	.name		= "gpt1_ick",
+	.parent		= &wkup_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT1_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+
+
+/* PER clock domain */
+
+static struct clk per_96m_fck = {
+	.name		= "per_96m_fck",
+	.parent		= &omap_96m_alwon_fck,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk per_48m_fck = {
+	.name		= "per_48m_fck",
+	.parent		= &omap_48m_fck,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart3_fck = {
+	.name		= "uart3_fck",
+	.parent		= &per_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_UART3_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt2_fck = {
+	.name		= "gpt2_fck",
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT2_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT2_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt3_fck = {
+	.name		= "gpt3_fck",
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT3_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT3_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt4_fck = {
+	.name		= "gpt4_fck",
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT4_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT4_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt5_fck = {
+	.name		= "gpt5_fck",
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT5_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT5_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt6_fck = {
+	.name		= "gpt6_fck",
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT6_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT6_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt7_fck = {
+	.name		= "gpt7_fck",
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT7_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT7_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt8_fck = {
+	.name		= "gpt8_fck",
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT8_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT8_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt9_fck = {
+	.name		= "gpt9_fck",
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT9_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT9_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk per_32k_alwon_fck = {
+	.name		= "per_32k_alwon_fck",
+	.parent		= &omap_32k_fck,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio6_fck = {
+	.name		= "gpio6_fck",
+	.parent		= &per_32k_alwon_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT6_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio5_fck = {
+	.name		= "gpio5_fck",
+	.parent		= &per_32k_alwon_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT5_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio4_fck = {
+	.name		= "gpio4_fck",
+	.parent		= &per_32k_alwon_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT4_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio3_fck = {
+	.name		= "gpio3_fck",
+	.parent		= &per_32k_alwon_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT3_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio2_fck = {
+	.name		= "gpio2_fck",
+	.parent		= &per_32k_alwon_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT2_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt3_fck = {
+	.name		= "wdt3_fck",
+	.parent		= &per_32k_alwon_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_WDT3_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk per_l4_ick = {
+	.name		= "per_l4_ick",
+	.parent		= &l4_ick,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio6_ick = {
+	.name		= "gpio6_ick",
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO6_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio5_ick = {
+	.name		= "gpio5_ick",
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO5_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio4_ick = {
+	.name		= "gpio4_ick",
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO4_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio3_ick = {
+	.name		= "gpio3_ick",
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO3_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio2_ick = {
+	.name		= "gpio2_ick",
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO2_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt3_ick = {
+	.name		= "wdt3_ick",
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_WDT3_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart3_ick = {
+	.name		= "uart3_ick",
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_UART3_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt9_ick = {
+	.name		= "gpt9_ick",
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT9_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt8_ick = {
+	.name		= "gpt8_ick",
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT8_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt7_ick = {
+	.name		= "gpt7_ick",
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT7_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt6_ick = {
+	.name		= "gpt6_ick",
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT6_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt5_ick = {
+	.name		= "gpt5_ick",
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT5_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt4_ick = {
+	.name		= "gpt4_ick",
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT4_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt3_ick = {
+	.name		= "gpt3_ick",
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT3_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt2_ick = {
+	.name		= "gpt2_ick",
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT2_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp2_ick = {
+	.name		= "mcbsp2_ick",
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_MCBSP2_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp3_ick = {
+	.name		= "mcbsp3_ick",
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_MCBSP3_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp4_ick = {
+	.name		= "mcbsp4_ick",
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_MCBSP4_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static const struct clksel mcbsp_234_clksel[] = {
+	{ .parent = &per_96m_fck, .rates = common_mcbsp_96m_rates },
+	{ .parent = &mcbsp_clks,   .rates = common_mcbsp_mcbsp_rates },
+	{ .parent = NULL }
+};
+
+static struct clk mcbsp2_fck = {
+	.name		= "mcbsp2_fck",
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_MCBSP2_SHIFT,
+	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0),
+	.clksel_mask	= OMAP2_MCBSP2_CLKS_MASK,
+	.clksel		= mcbsp_234_clksel,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk mcbsp3_fck = {
+	.name		= "mcbsp3_fck",
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_MCBSP3_SHIFT,
+	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1),
+	.clksel_mask	= OMAP2_MCBSP3_CLKS_MASK,
+	.clksel		= mcbsp_234_clksel,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk mcbsp4_fck = {
+	.name		= "mcbsp4_fck",
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_MCBSP4_SHIFT,
+	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1),
+	.clksel_mask	= OMAP2_MCBSP4_CLKS_MASK,
+	.clksel		= mcbsp_234_clksel,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* EMU clocks */
+
+/* More information: ARM Cortex-A8 Technical Reference Manual, sect 10.1 */
+
+static const struct clksel_rate emu_src_sys_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate emu_src_core_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate emu_src_per_rates[] = {
+	{ .div = 1, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate emu_src_mpu_rates[] = {
+	{ .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 },
+};
+
+static const struct clksel emu_src_clksel[] = {
+	{ .parent = &sys_ck,		.rates = emu_src_sys_rates },
+	{ .parent = &emu_core_alwon_ck, .rates = emu_src_core_rates },
+	{ .parent = &emu_per_alwon_ck,	.rates = emu_src_per_rates },
+	{ .parent = &emu_mpu_alwon_ck,	.rates = emu_src_mpu_rates },
+	{ .parent = NULL },
+};
+
+/*
+ * Like the clkout_src clocks, emu_src_clk is a virtual clock, existing only
+ * to switch the source of some of the EMU clocks.
+ * XXX Are there CLKEN bits for these EMU clks?
+ */
+static struct clk emu_src_ck = {
+	.name		= "emu_src_ck",
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_MUX_CTRL_MASK,
+	.clksel		= emu_src_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel_rate pclk_emu_rates[] = {
+	{ .div = 2, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 3, .val = 3, .flags = RATE_IN_343X },
+	{ .div = 4, .val = 4, .flags = RATE_IN_343X },
+	{ .div = 6, .val = 6, .flags = RATE_IN_343X },
+	{ .div = 0 },
+};
+
+static const struct clksel pclk_emu_clksel[] = {
+	{ .parent = &emu_src_ck, .rates = pclk_emu_rates },
+	{ .parent = NULL },
+};
+
+static struct clk pclk_fck = {
+	.name		= "pclk_fck",
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_CLKSEL_PCLK_MASK,
+	.clksel		= pclk_emu_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel_rate pclkx2_emu_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
+	{ .div = 3, .val = 3, .flags = RATE_IN_343X },
+	{ .div = 0 },
+};
+
+static const struct clksel pclkx2_emu_clksel[] = {
+	{ .parent = &emu_src_ck, .rates = pclkx2_emu_rates },
+	{ .parent = NULL },
+};
+
+static struct clk pclkx2_fck = {
+	.name		= "pclkx2_fck",
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_CLKSEL_PCLKX2_MASK,
+	.clksel		= pclkx2_emu_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel atclk_emu_clksel[] = {
+	{ .parent = &emu_src_ck, .rates = div2_rates },
+	{ .parent = NULL },
+};
+
+static struct clk atclk_fck = {
+	.name		= "atclk_fck",
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_CLKSEL_ATCLK_MASK,
+	.clksel		= atclk_emu_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk traceclk_src_fck = {
+	.name		= "traceclk_src_fck",
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_TRACE_MUX_CTRL_MASK,
+	.clksel		= emu_src_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel_rate traceclk_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
+	{ .div = 4, .val = 4, .flags = RATE_IN_343X },
+	{ .div = 0 },
+};
+
+static const struct clksel traceclk_clksel[] = {
+	{ .parent = &traceclk_src_fck, .rates = traceclk_rates },
+	{ .parent = NULL },
+};
+
+static struct clk traceclk_fck = {
+	.name		= "traceclk_fck",
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_CLKSEL_TRACECLK_MASK,
+	.clksel		= traceclk_clksel,
+	.flags		= CLOCK_IN_OMAP343X | ALWAYS_ENABLED,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* SR clocks */
+
+/* SmartReflex fclk (VDD1) */
+static struct clk sr1_fck = {
+	.name		= "sr1_fck",
+	.parent		= &sys_ck,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_SR1_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.recalc		= &followparent_recalc,
+};
+
+/* SmartReflex fclk (VDD2) */
+static struct clk sr2_fck = {
+	.name		= "sr2_fck",
+	.parent		= &sys_ck,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_SR2_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sr_l4_ick = {
+	.name		= "sr_l4_ick",
+	.parent		= &l4_ick,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+/* SECURE_32K_FCK clocks */
+
+static struct clk gpt12_fck = {
+	.name		= "gpt12_fck",
+	.parent		= &secure_32k_fck,
+	.flags		= CLOCK_IN_OMAP343X | ALWAYS_ENABLED,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt1_fck = {
+	.name		= "wdt1_fck",
+	.parent		= &secure_32k_fck,
+	.flags		= CLOCK_IN_OMAP343X | ALWAYS_ENABLED,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk *onchip_34xx_clks[] __initdata = {
+	&omap_32k_fck,
+	&virt_12m_ck,
+	&virt_13m_ck,
+	&virt_16_8m_ck,
+	&virt_19_2m_ck,
+	&virt_26m_ck,
+	&virt_38_4m_ck,
+	&osc_sys_ck,
+	&sys_ck,
+	&sys_altclk,
+	&mcbsp_clks,
+	&sys_clkout1,
+	&dpll1_ck,
+	&dpll1_x2_ck,
+	&dpll1_x2m2_ck,
+	&dpll2_ck,
+	&dpll2_m2_ck,
+	&dpll3_ck,
+	&core_ck,
+	&dpll3_x2_ck,
+	&dpll3_m2_ck,
+	&dpll3_m2x2_ck,
+	&dpll3_m3_ck,
+	&dpll3_m3x2_ck,
+	&emu_core_alwon_ck,
+	&dpll4_ck,
+	&dpll4_x2_ck,
+	&omap_96m_alwon_fck,
+	&omap_96m_fck,
+	&cm_96m_fck,
+	&virt_omap_54m_fck,
+	&omap_54m_fck,
+	&omap_48m_fck,
+	&omap_12m_fck,
+	&dpll4_m2_ck,
+	&dpll4_m2x2_ck,
+	&dpll4_m3_ck,
+	&dpll4_m3x2_ck,
+	&dpll4_m4_ck,
+	&dpll4_m4x2_ck,
+	&dpll4_m5_ck,
+	&dpll4_m5x2_ck,
+	&dpll4_m6_ck,
+	&dpll4_m6x2_ck,
+	&emu_per_alwon_ck,
+	&dpll5_ck,
+	&dpll5_m2_ck,
+	&omap_120m_fck,
+	&clkout2_src_ck,
+	&sys_clkout2,
+	&corex2_fck,
+	&dpll1_fck,
+	&mpu_ck,
+	&arm_fck,
+	&emu_mpu_alwon_ck,
+	&dpll2_fck,
+	&iva2_ck,
+	&l3_ick,
+	&l4_ick,
+	&rm_ick,
+	&gfx_l3_fck,
+	&gfx_l3_ick,
+	&gfx_cg1_ck,
+	&gfx_cg2_ck,
+	&sgx_fck,
+	&sgx_ick,
+	&d2d_26m_fck,
+	&gpt10_fck,
+	&gpt11_fck,
+	&cpefuse_fck,
+	&ts_fck,
+	&usbtll_fck,
+	&core_96m_fck,
+	&mmchs3_fck,
+	&mmchs2_fck,
+	&mspro_fck,
+	&mmchs1_fck,
+	&i2c3_fck,
+	&i2c2_fck,
+	&i2c1_fck,
+	&mcbsp5_fck,
+	&mcbsp1_fck,
+	&core_48m_fck,
+	&mcspi4_fck,
+	&mcspi3_fck,
+	&mcspi2_fck,
+	&mcspi1_fck,
+	&uart2_fck,
+	&uart1_fck,
+	&fshostusb_fck,
+	&core_12m_fck,
+	&hdq_fck,
+	&ssi_ssr_fck,
+	&ssi_sst_fck,
+	&core_l3_ick,
+	&hsotgusb_ick,
+	&sdrc_ick,
+	&gpmc_fck,
+	&security_l3_ick,
+	&pka_ick,
+	&core_l4_ick,
+	&usbtll_ick,
+	&mmchs3_ick,
+	&icr_ick,
+	&aes2_ick,
+	&sha12_ick,
+	&des2_ick,
+	&mmchs2_ick,
+	&mmchs1_ick,
+	&mspro_ick,
+	&hdq_ick,
+	&mcspi4_ick,
+	&mcspi3_ick,
+	&mcspi2_ick,
+	&mcspi1_ick,
+	&i2c3_ick,
+	&i2c2_ick,
+	&i2c1_ick,
+	&uart2_ick,
+	&uart1_ick,
+	&gpt11_ick,
+	&gpt10_ick,
+	&mcbsp5_ick,
+	&mcbsp1_ick,
+	&fac_ick,
+	&mailboxes_ick,
+	&omapctrl_ick,
+	&ssi_l4_ick,
+	&ssi_ick,
+	&usb_l4_ick,
+	&security_l4_ick2,
+	&aes1_ick,
+	&rng_ick,
+	&sha11_ick,
+	&des1_ick,
+	&dss1_alwon_fck,
+	&dss_tv_fck,
+	&dss_96m_fck,
+	&dss2_alwon_fck,
+	&dss_ick,
+	&cam_mclk,
+	&cam_l3_ick,
+	&cam_l4_ick,
+	&usbhost_120m_fck,
+	&usbhost_48m_fck,
+	&usbhost_l3_ick,
+	&usbhost_l4_ick,
+	&usbhost_sar_fck,
+	&usim_fck,
+	&gpt1_fck,
+	&wkup_32k_fck,
+	&gpio1_fck,
+	&wdt2_fck,
+	&wkup_l4_ick,
+	&usim_ick,
+	&wdt2_ick,
+	&wdt1_ick,
+	&gpio1_ick,
+	&omap_32ksync_ick,
+	&gpt12_ick,
+	&gpt1_ick,
+	&per_96m_fck,
+	&per_48m_fck,
+	&uart3_fck,
+	&gpt2_fck,
+	&gpt3_fck,
+	&gpt4_fck,
+	&gpt5_fck,
+	&gpt6_fck,
+	&gpt7_fck,
+	&gpt8_fck,
+	&gpt9_fck,
+	&per_32k_alwon_fck,
+	&gpio6_fck,
+	&gpio5_fck,
+	&gpio4_fck,
+	&gpio3_fck,
+	&gpio2_fck,
+	&wdt3_fck,
+	&per_l4_ick,
+	&gpio6_ick,
+	&gpio5_ick,
+	&gpio4_ick,
+	&gpio3_ick,
+	&gpio2_ick,
+	&wdt3_ick,
+	&uart3_ick,
+	&gpt9_ick,
+	&gpt8_ick,
+	&gpt7_ick,
+	&gpt6_ick,
+	&gpt5_ick,
+	&gpt4_ick,
+	&gpt3_ick,
+	&gpt2_ick,
+	&mcbsp2_ick,
+	&mcbsp3_ick,
+	&mcbsp4_ick,
+	&mcbsp2_fck,
+	&mcbsp3_fck,
+	&mcbsp4_fck,
+	&emu_src_ck,
+	&pclk_fck,
+	&pclkx2_fck,
+	&atclk_fck,
+	&traceclk_src_fck,
+	&traceclk_fck,
+	&sr1_fck,
+	&sr2_fck,
+	&sr_l4_ick,
+	&secure_32k_fck,
+	&gpt12_fck,
+	&wdt1_fck,
+};
+
+#endif
diff --git a/arch/arm/mach-omap2/cm-regbits-24xx.h b/arch/arm/mach-omap2/cm-regbits-24xx.h
new file mode 100644
index 0000000..20ac381
--- /dev/null
+++ b/arch/arm/mach-omap2/cm-regbits-24xx.h
@@ -0,0 +1,401 @@
+#ifndef __ARCH_ARM_MACH_OMAP2_CM_REGBITS_24XX_H
+#define __ARCH_ARM_MACH_OMAP2_CM_REGBITS_24XX_H
+
+/*
+ * OMAP24XX Clock Management register bits
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Copyright (C) 2007 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "cm.h"
+
+/* Bits shared between registers */
+
+/* CM_FCLKEN1_CORE and CM_ICLKEN1_CORE shared bits */
+#define OMAP24XX_EN_CAM_SHIFT				31
+#define OMAP24XX_EN_CAM					(1 << 31)
+#define OMAP24XX_EN_WDT4_SHIFT				29
+#define OMAP24XX_EN_WDT4				(1 << 29)
+#define OMAP2420_EN_WDT3_SHIFT				28
+#define OMAP2420_EN_WDT3				(1 << 28)
+#define OMAP24XX_EN_MSPRO_SHIFT				27
+#define OMAP24XX_EN_MSPRO				(1 << 27)
+#define OMAP24XX_EN_FAC_SHIFT				25
+#define OMAP24XX_EN_FAC					(1 << 25)
+#define OMAP2420_EN_EAC_SHIFT				24
+#define OMAP2420_EN_EAC					(1 << 24)
+#define OMAP24XX_EN_HDQ_SHIFT				23
+#define OMAP24XX_EN_HDQ					(1 << 23)
+#define OMAP2420_EN_I2C2_SHIFT				20
+#define OMAP2420_EN_I2C2				(1 << 20)
+#define OMAP2420_EN_I2C1_SHIFT				19
+#define OMAP2420_EN_I2C1				(1 << 19)
+
+/* CM_FCLKEN2_CORE and CM_ICLKEN2_CORE shared bits */
+#define OMAP2430_EN_MCBSP5_SHIFT			5
+#define OMAP2430_EN_MCBSP5				(1 << 5)
+#define OMAP2430_EN_MCBSP4_SHIFT			4
+#define OMAP2430_EN_MCBSP4				(1 << 4)
+#define OMAP2430_EN_MCBSP3_SHIFT			3
+#define OMAP2430_EN_MCBSP3				(1 << 3)
+#define OMAP24XX_EN_SSI_SHIFT				1
+#define OMAP24XX_EN_SSI					(1 << 1)
+
+/* CM_FCLKEN_WKUP and CM_ICLKEN_WKUP shared bits */
+#define OMAP24XX_EN_MPU_WDT_SHIFT			3
+#define OMAP24XX_EN_MPU_WDT				(1 << 3)
+
+/* Bits specific to each register */
+
+/* CM_IDLEST_MPU */
+/* 2430 only */
+#define OMAP2430_ST_MPU					(1 << 0)
+
+/* CM_CLKSEL_MPU */
+#define OMAP24XX_CLKSEL_MPU_SHIFT			0
+#define OMAP24XX_CLKSEL_MPU_MASK			(0x1f << 0)
+
+/* CM_CLKSTCTRL_MPU */
+#define OMAP24XX_AUTOSTATE_MPU				(1 << 0)
+
+/* CM_FCLKEN1_CORE specific bits*/
+#define OMAP24XX_EN_TV_SHIFT				2
+#define OMAP24XX_EN_TV					(1 << 2)
+#define OMAP24XX_EN_DSS2_SHIFT				1
+#define OMAP24XX_EN_DSS2				(1 << 1)
+#define OMAP24XX_EN_DSS1_SHIFT				0
+#define OMAP24XX_EN_DSS1				(1 << 0)
+
+/* CM_FCLKEN2_CORE specific bits */
+#define OMAP2430_EN_I2CHS2_SHIFT			20
+#define OMAP2430_EN_I2CHS2				(1 << 20)
+#define OMAP2430_EN_I2CHS1_SHIFT			19
+#define OMAP2430_EN_I2CHS1				(1 << 19)
+#define OMAP2430_EN_MMCHSDB2_SHIFT			17
+#define OMAP2430_EN_MMCHSDB2				(1 << 17)
+#define OMAP2430_EN_MMCHSDB1_SHIFT			16
+#define OMAP2430_EN_MMCHSDB1				(1 << 16)
+
+/* CM_ICLKEN1_CORE specific bits */
+#define OMAP24XX_EN_MAILBOXES_SHIFT			30
+#define OMAP24XX_EN_MAILBOXES				(1 << 30)
+#define OMAP24XX_EN_DSS_SHIFT				0
+#define OMAP24XX_EN_DSS					(1 << 0)
+
+/* CM_ICLKEN2_CORE specific bits */
+
+/* CM_ICLKEN3_CORE */
+/* 2430 only */
+#define OMAP2430_EN_SDRC_SHIFT				2
+#define OMAP2430_EN_SDRC				(1 << 2)
+
+/* CM_ICLKEN4_CORE */
+#define OMAP24XX_EN_PKA_SHIFT				4
+#define OMAP24XX_EN_PKA					(1 << 4)
+#define OMAP24XX_EN_AES_SHIFT				3
+#define OMAP24XX_EN_AES					(1 << 3)
+#define OMAP24XX_EN_RNG_SHIFT				2
+#define OMAP24XX_EN_RNG					(1 << 2)
+#define OMAP24XX_EN_SHA_SHIFT				1
+#define OMAP24XX_EN_SHA					(1 << 1)
+#define OMAP24XX_EN_DES_SHIFT				0
+#define OMAP24XX_EN_DES					(1 << 0)
+
+/* CM_IDLEST1_CORE specific bits */
+#define OMAP24XX_ST_MAILBOXES				(1 << 30)
+#define OMAP24XX_ST_WDT4				(1 << 29)
+#define OMAP2420_ST_WDT3				(1 << 28)
+#define OMAP24XX_ST_MSPRO				(1 << 27)
+#define OMAP24XX_ST_FAC					(1 << 25)
+#define OMAP2420_ST_EAC					(1 << 24)
+#define OMAP24XX_ST_HDQ					(1 << 23)
+#define OMAP24XX_ST_I2C2				(1 << 20)
+#define OMAP24XX_ST_I2C1				(1 << 19)
+#define OMAP24XX_ST_MCBSP2				(1 << 16)
+#define OMAP24XX_ST_MCBSP1				(1 << 15)
+#define OMAP24XX_ST_DSS					(1 << 0)
+
+/* CM_IDLEST2_CORE */
+#define OMAP2430_ST_MCBSP5				(1 << 5)
+#define OMAP2430_ST_MCBSP4				(1 << 4)
+#define OMAP2430_ST_MCBSP3				(1 << 3)
+#define OMAP24XX_ST_SSI					(1 << 1)
+
+/* CM_IDLEST3_CORE */
+/* 2430 only */
+#define OMAP2430_ST_SDRC				(1 << 2)
+
+/* CM_IDLEST4_CORE */
+#define OMAP24XX_ST_PKA					(1 << 4)
+#define OMAP24XX_ST_AES					(1 << 3)
+#define OMAP24XX_ST_RNG					(1 << 2)
+#define OMAP24XX_ST_SHA					(1 << 1)
+#define OMAP24XX_ST_DES					(1 << 0)
+
+/* CM_AUTOIDLE1_CORE */
+#define OMAP24XX_AUTO_CAM				(1 << 31)
+#define OMAP24XX_AUTO_MAILBOXES				(1 << 30)
+#define OMAP24XX_AUTO_WDT4				(1 << 29)
+#define OMAP2420_AUTO_WDT3				(1 << 28)
+#define OMAP24XX_AUTO_MSPRO				(1 << 27)
+#define OMAP2420_AUTO_MMC				(1 << 26)
+#define OMAP24XX_AUTO_FAC				(1 << 25)
+#define OMAP2420_AUTO_EAC				(1 << 24)
+#define OMAP24XX_AUTO_HDQ				(1 << 23)
+#define OMAP24XX_AUTO_UART2				(1 << 22)
+#define OMAP24XX_AUTO_UART1				(1 << 21)
+#define OMAP24XX_AUTO_I2C2				(1 << 20)
+#define OMAP24XX_AUTO_I2C1				(1 << 19)
+#define OMAP24XX_AUTO_MCSPI2				(1 << 18)
+#define OMAP24XX_AUTO_MCSPI1				(1 << 17)
+#define OMAP24XX_AUTO_MCBSP2				(1 << 16)
+#define OMAP24XX_AUTO_MCBSP1				(1 << 15)
+#define OMAP24XX_AUTO_GPT12				(1 << 14)
+#define OMAP24XX_AUTO_GPT11				(1 << 13)
+#define OMAP24XX_AUTO_GPT10				(1 << 12)
+#define OMAP24XX_AUTO_GPT9				(1 << 11)
+#define OMAP24XX_AUTO_GPT8				(1 << 10)
+#define OMAP24XX_AUTO_GPT7				(1 << 9)
+#define OMAP24XX_AUTO_GPT6				(1 << 8)
+#define OMAP24XX_AUTO_GPT5				(1 << 7)
+#define OMAP24XX_AUTO_GPT4				(1 << 6)
+#define OMAP24XX_AUTO_GPT3				(1 << 5)
+#define OMAP24XX_AUTO_GPT2				(1 << 4)
+#define OMAP2420_AUTO_VLYNQ				(1 << 3)
+#define OMAP24XX_AUTO_DSS				(1 << 0)
+
+/* CM_AUTOIDLE2_CORE */
+#define OMAP2430_AUTO_MDM_INTC				(1 << 11)
+#define OMAP2430_AUTO_GPIO5				(1 << 10)
+#define OMAP2430_AUTO_MCSPI3				(1 << 9)
+#define OMAP2430_AUTO_MMCHS2				(1 << 8)
+#define OMAP2430_AUTO_MMCHS1				(1 << 7)
+#define OMAP2430_AUTO_USBHS				(1 << 6)
+#define OMAP2430_AUTO_MCBSP5				(1 << 5)
+#define OMAP2430_AUTO_MCBSP4				(1 << 4)
+#define OMAP2430_AUTO_MCBSP3				(1 << 3)
+#define OMAP24XX_AUTO_UART3				(1 << 2)
+#define OMAP24XX_AUTO_SSI				(1 << 1)
+#define OMAP24XX_AUTO_USB				(1 << 0)
+
+/* CM_AUTOIDLE3_CORE */
+#define OMAP24XX_AUTO_SDRC				(1 << 2)
+#define OMAP24XX_AUTO_GPMC				(1 << 1)
+#define OMAP24XX_AUTO_SDMA				(1 << 0)
+
+/* CM_AUTOIDLE4_CORE */
+#define OMAP24XX_AUTO_PKA				(1 << 4)
+#define OMAP24XX_AUTO_AES				(1 << 3)
+#define OMAP24XX_AUTO_RNG				(1 << 2)
+#define OMAP24XX_AUTO_SHA				(1 << 1)
+#define OMAP24XX_AUTO_DES				(1 << 0)
+
+/* CM_CLKSEL1_CORE */
+#define OMAP24XX_CLKSEL_USB_SHIFT			25
+#define OMAP24XX_CLKSEL_USB_MASK			(0x7 << 25)
+#define OMAP24XX_CLKSEL_SSI_SHIFT			20
+#define OMAP24XX_CLKSEL_SSI_MASK			(0x1f << 20)
+#define OMAP2420_CLKSEL_VLYNQ_SHIFT			15
+#define OMAP2420_CLKSEL_VLYNQ_MASK			(0x1f << 15)
+#define OMAP24XX_CLKSEL_DSS2_SHIFT			13
+#define OMAP24XX_CLKSEL_DSS2_MASK			(0x1 << 13)
+#define OMAP24XX_CLKSEL_DSS1_SHIFT			8
+#define OMAP24XX_CLKSEL_DSS1_MASK			(0x1f << 8)
+#define OMAP24XX_CLKSEL_L4_SHIFT			5
+#define OMAP24XX_CLKSEL_L4_MASK				(0x3 << 5)
+#define OMAP24XX_CLKSEL_L3_SHIFT			0
+#define OMAP24XX_CLKSEL_L3_MASK				(0x1f << 0)
+
+/* CM_CLKSEL2_CORE */
+#define OMAP24XX_CLKSEL_GPT12_SHIFT			22
+#define OMAP24XX_CLKSEL_GPT12_MASK			(0x3 << 22)
+#define OMAP24XX_CLKSEL_GPT11_SHIFT			20
+#define OMAP24XX_CLKSEL_GPT11_MASK			(0x3 << 20)
+#define OMAP24XX_CLKSEL_GPT10_SHIFT			18
+#define OMAP24XX_CLKSEL_GPT10_MASK			(0x3 << 18)
+#define OMAP24XX_CLKSEL_GPT9_SHIFT			16
+#define OMAP24XX_CLKSEL_GPT9_MASK			(0x3 << 16)
+#define OMAP24XX_CLKSEL_GPT8_SHIFT			14
+#define OMAP24XX_CLKSEL_GPT8_MASK			(0x3 << 14)
+#define OMAP24XX_CLKSEL_GPT7_SHIFT			12
+#define OMAP24XX_CLKSEL_GPT7_MASK			(0x3 << 12)
+#define OMAP24XX_CLKSEL_GPT6_SHIFT			10
+#define OMAP24XX_CLKSEL_GPT6_MASK			(0x3 << 10)
+#define OMAP24XX_CLKSEL_GPT5_SHIFT			8
+#define OMAP24XX_CLKSEL_GPT5_MASK			(0x3 << 8)
+#define OMAP24XX_CLKSEL_GPT4_SHIFT			6
+#define OMAP24XX_CLKSEL_GPT4_MASK			(0x3 << 6)
+#define OMAP24XX_CLKSEL_GPT3_SHIFT			4
+#define OMAP24XX_CLKSEL_GPT3_MASK			(0x3 << 4)
+#define OMAP24XX_CLKSEL_GPT2_SHIFT			2
+#define OMAP24XX_CLKSEL_GPT2_MASK			(0x3 << 2)
+
+/* CM_CLKSTCTRL_CORE */
+#define OMAP24XX_AUTOSTATE_DSS				(1 << 2)
+#define OMAP24XX_AUTOSTATE_L4				(1 << 1)
+#define OMAP24XX_AUTOSTATE_L3				(1 << 0)
+
+/* CM_FCLKEN_GFX */
+#define OMAP24XX_EN_3D_SHIFT				2
+#define OMAP24XX_EN_3D					(1 << 2)
+#define OMAP24XX_EN_2D_SHIFT				1
+#define OMAP24XX_EN_2D					(1 << 1)
+
+/* CM_ICLKEN_GFX specific bits */
+
+/* CM_IDLEST_GFX specific bits */
+
+/* CM_CLKSEL_GFX specific bits */
+
+/* CM_CLKSTCTRL_GFX */
+#define OMAP24XX_AUTOSTATE_GFX				(1 << 0)
+
+/* CM_FCLKEN_WKUP specific bits */
+
+/* CM_ICLKEN_WKUP specific bits */
+#define OMAP2430_EN_ICR_SHIFT				6
+#define OMAP2430_EN_ICR					(1 << 6)
+#define OMAP24XX_EN_OMAPCTRL_SHIFT			5
+#define OMAP24XX_EN_OMAPCTRL				(1 << 5)
+#define OMAP24XX_EN_WDT1_SHIFT				4
+#define OMAP24XX_EN_WDT1				(1 << 4)
+#define OMAP24XX_EN_32KSYNC_SHIFT			1
+#define OMAP24XX_EN_32KSYNC				(1 << 1)
+
+/* CM_IDLEST_WKUP specific bits */
+#define OMAP2430_ST_ICR					(1 << 6)
+#define OMAP24XX_ST_OMAPCTRL				(1 << 5)
+#define OMAP24XX_ST_WDT1				(1 << 4)
+#define OMAP24XX_ST_MPU_WDT				(1 << 3)
+#define OMAP24XX_ST_32KSYNC				(1 << 1)
+
+/* CM_AUTOIDLE_WKUP */
+#define OMAP24XX_AUTO_OMAPCTRL				(1 << 5)
+#define OMAP24XX_AUTO_WDT1				(1 << 4)
+#define OMAP24XX_AUTO_MPU_WDT				(1 << 3)
+#define OMAP24XX_AUTO_GPIOS				(1 << 2)
+#define OMAP24XX_AUTO_32KSYNC				(1 << 1)
+#define OMAP24XX_AUTO_GPT1				(1 << 0)
+
+/* CM_CLKSEL_WKUP */
+#define OMAP24XX_CLKSEL_GPT1_SHIFT			0
+#define OMAP24XX_CLKSEL_GPT1_MASK			(0x3 << 0)
+
+/* CM_CLKEN_PLL */
+#define OMAP24XX_EN_54M_PLL_SHIFT			6
+#define OMAP24XX_EN_54M_PLL_MASK			(0x3 << 6)
+#define OMAP24XX_EN_96M_PLL_SHIFT			2
+#define OMAP24XX_EN_96M_PLL_MASK			(0x3 << 2)
+#define OMAP24XX_EN_DPLL_SHIFT				0
+#define OMAP24XX_EN_DPLL_MASK				(0x3 << 0)
+
+/* CM_IDLEST_CKGEN */
+#define OMAP24XX_ST_54M_APLL				(1 << 9)
+#define OMAP24XX_ST_96M_APLL				(1 << 8)
+#define OMAP24XX_ST_54M_CLK				(1 << 6)
+#define OMAP24XX_ST_12M_CLK				(1 << 5)
+#define OMAP24XX_ST_48M_CLK				(1 << 4)
+#define OMAP24XX_ST_96M_CLK				(1 << 2)
+#define OMAP24XX_ST_CORE_CLK_SHIFT			0
+#define OMAP24XX_ST_CORE_CLK_MASK			(0x3 << 0)
+
+/* CM_AUTOIDLE_PLL */
+#define OMAP24XX_AUTO_54M_SHIFT				6
+#define OMAP24XX_AUTO_54M_MASK				(0x3 << 6)
+#define OMAP24XX_AUTO_96M_SHIFT				2
+#define OMAP24XX_AUTO_96M_MASK				(0x3 << 2)
+#define OMAP24XX_AUTO_DPLL_SHIFT			0
+#define OMAP24XX_AUTO_DPLL_MASK				(0x3 << 0)
+
+/* CM_CLKSEL1_PLL */
+#define OMAP2430_MAXDPLLFASTLOCK_SHIFT			28
+#define OMAP2430_MAXDPLLFASTLOCK_MASK			(0x7 << 28)
+#define OMAP24XX_APLLS_CLKIN_SHIFT			23
+#define OMAP24XX_APLLS_CLKIN_MASK			(0x7 << 23)
+#define OMAP24XX_DPLL_MULT_SHIFT			12
+#define OMAP24XX_DPLL_MULT_MASK				(0x3ff << 12)
+#define OMAP24XX_DPLL_DIV_SHIFT				8
+#define OMAP24XX_DPLL_DIV_MASK				(0xf << 8)
+#define OMAP24XX_54M_SOURCE_SHIFT			5
+#define OMAP24XX_54M_SOURCE				(1 << 5)
+#define OMAP2430_96M_SOURCE_SHIFT			4
+#define OMAP2430_96M_SOURCE				(1 << 4)
+#define OMAP24XX_48M_SOURCE_SHIFT			3
+#define OMAP24XX_48M_SOURCE				(1 << 3)
+#define OMAP2430_ALTCLK_SOURCE_SHIFT			0
+#define OMAP2430_ALTCLK_SOURCE_MASK			(0x7 << 0)
+
+/* CM_CLKSEL2_PLL */
+#define OMAP24XX_CORE_CLK_SRC_SHIFT			0
+#define OMAP24XX_CORE_CLK_SRC_MASK			(0x3 << 0)
+
+/* CM_FCLKEN_DSP */
+#define OMAP2420_EN_IVA_COP_SHIFT			10
+#define OMAP2420_EN_IVA_COP				(1 << 10)
+#define OMAP2420_EN_IVA_MPU_SHIFT			8
+#define OMAP2420_EN_IVA_MPU				(1 << 8)
+#define OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT		0
+#define OMAP24XX_CM_FCLKEN_DSP_EN_DSP			(1 << 0)
+
+/* CM_ICLKEN_DSP */
+#define OMAP2420_EN_DSP_IPI_SHIFT			1
+#define OMAP2420_EN_DSP_IPI				(1 << 1)
+
+/* CM_IDLEST_DSP */
+#define OMAP2420_ST_IVA					(1 << 8)
+#define OMAP2420_ST_IPI					(1 << 1)
+#define OMAP24XX_ST_DSP					(1 << 0)
+
+/* CM_AUTOIDLE_DSP */
+#define OMAP2420_AUTO_DSP_IPI				(1 << 1)
+
+/* CM_CLKSEL_DSP */
+#define OMAP2420_SYNC_IVA				(1 << 13)
+#define OMAP2420_CLKSEL_IVA_SHIFT			8
+#define OMAP2420_CLKSEL_IVA_MASK			(0x1f << 8)
+#define OMAP24XX_SYNC_DSP				(1 << 7)
+#define OMAP24XX_CLKSEL_DSP_IF_SHIFT			5
+#define OMAP24XX_CLKSEL_DSP_IF_MASK			(0x3 << 5)
+#define OMAP24XX_CLKSEL_DSP_SHIFT			0
+#define OMAP24XX_CLKSEL_DSP_MASK			(0x1f << 0)
+
+/* CM_CLKSTCTRL_DSP */
+#define OMAP2420_AUTOSTATE_IVA				(1 << 8)
+#define OMAP24XX_AUTOSTATE_DSP				(1 << 0)
+
+/* CM_FCLKEN_MDM */
+/* 2430 only */
+#define OMAP2430_EN_OSC_SHIFT				1
+#define OMAP2430_EN_OSC					(1 << 1)
+
+/* CM_ICLKEN_MDM */
+/* 2430 only */
+#define OMAP2430_CM_ICLKEN_MDM_EN_MDM_SHIFT		0
+#define OMAP2430_CM_ICLKEN_MDM_EN_MDM			(1 << 0)
+
+/* CM_IDLEST_MDM specific bits */
+/* 2430 only */
+
+/* CM_AUTOIDLE_MDM */
+/* 2430 only */
+#define OMAP2430_AUTO_OSC				(1 << 1)
+#define OMAP2430_AUTO_MDM				(1 << 0)
+
+/* CM_CLKSEL_MDM */
+/* 2430 only */
+#define OMAP2430_SYNC_MDM				(1 << 4)
+#define OMAP2430_CLKSEL_MDM_SHIFT			0
+#define OMAP2430_CLKSEL_MDM_MASK			(0xf << 0)
+
+/* CM_CLKSTCTRL_MDM */
+/* 2430 only */
+#define OMAP2430_AUTOSTATE_MDM				(1 << 0)
+
+#endif
diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h
new file mode 100644
index 0000000..9249129
--- /dev/null
+++ b/arch/arm/mach-omap2/cm-regbits-34xx.h
@@ -0,0 +1,673 @@
+#ifndef __ARCH_ARM_MACH_OMAP2_CM_REGBITS_34XX_H
+#define __ARCH_ARM_MACH_OMAP2_CM_REGBITS_34XX_H
+
+/*
+ * OMAP3430 Clock Management register bits
+ *
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "cm.h"
+
+/* Bits shared between registers */
+
+/* CM_FCLKEN1_CORE and CM_ICLKEN1_CORE shared bits */
+#define OMAP3430ES2_EN_MMC3_MASK			(1 << 30)
+#define OMAP3430ES2_EN_MMC3_SHIFT			30
+#define OMAP3430_EN_MSPRO				(1 << 23)
+#define OMAP3430_EN_MSPRO_SHIFT				23
+#define OMAP3430_EN_HDQ					(1 << 22)
+#define OMAP3430_EN_HDQ_SHIFT				22
+#define OMAP3430ES1_EN_FSHOSTUSB			(1 << 5)
+#define OMAP3430ES1_EN_FSHOSTUSB_SHIFT			5
+#define OMAP3430ES1_EN_D2D				(1 << 3)
+#define OMAP3430ES1_EN_D2D_SHIFT			3
+#define OMAP3430_EN_SSI					(1 << 0)
+#define OMAP3430_EN_SSI_SHIFT				0
+
+/* CM_FCLKEN3_CORE and CM_ICLKEN3_CORE shared bits */
+#define OMAP3430ES2_EN_USBTLL_SHIFT			2
+#define OMAP3430ES2_EN_USBTLL_MASK			(1 << 2)
+
+/* CM_FCLKEN_WKUP and CM_ICLKEN_WKUP shared bits */
+#define OMAP3430_EN_WDT2				(1 << 5)
+#define OMAP3430_EN_WDT2_SHIFT				5
+
+/* CM_ICLKEN_CAM, CM_FCLKEN_CAM shared bits */
+#define OMAP3430_EN_CAM					(1 << 0)
+#define OMAP3430_EN_CAM_SHIFT				0
+
+/* CM_FCLKEN_PER, CM_ICLKEN_PER shared bits */
+#define OMAP3430_EN_WDT3				(1 << 12)
+#define OMAP3430_EN_WDT3_SHIFT				12
+
+/* CM_CLKSEL2_EMU, CM_CLKSEL3_EMU shared bits */
+#define OMAP3430_OVERRIDE_ENABLE			(1 << 19)
+
+
+/* Bits specific to each register */
+
+/* CM_FCLKEN_IVA2 */
+#define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2			(1 << 0)
+
+/* CM_CLKEN_PLL_IVA2 */
+#define OMAP3430_IVA2_DPLL_RAMPTIME_SHIFT		8
+#define OMAP3430_IVA2_DPLL_RAMPTIME_MASK		(0x3 << 8)
+#define OMAP3430_IVA2_DPLL_FREQSEL_SHIFT		4
+#define OMAP3430_IVA2_DPLL_FREQSEL_MASK			(0xf << 4)
+#define OMAP3430_EN_IVA2_DPLL_DRIFTGUARD_SHIFT		3
+#define OMAP3430_EN_IVA2_DPLL_DRIFTGUARD_MASK		(1 << 3)
+#define OMAP3430_EN_IVA2_DPLL_SHIFT			0
+#define OMAP3430_EN_IVA2_DPLL_MASK			(0x7 << 0)
+
+/* CM_IDLEST_IVA2 */
+#define OMAP3430_ST_IVA2				(1 << 0)
+
+/* CM_IDLEST_PLL_IVA2 */
+#define OMAP3430_ST_IVA2_CLK				(1 << 0)
+
+/* CM_AUTOIDLE_PLL_IVA2 */
+#define OMAP3430_AUTO_IVA2_DPLL_SHIFT			0
+#define OMAP3430_AUTO_IVA2_DPLL_MASK			(0x7 << 0)
+
+/* CM_CLKSEL1_PLL_IVA2 */
+#define OMAP3430_IVA2_CLK_SRC_SHIFT			19
+#define OMAP3430_IVA2_CLK_SRC_MASK			(0x3 << 19)
+#define OMAP3430_IVA2_DPLL_MULT_SHIFT			8
+#define OMAP3430_IVA2_DPLL_MULT_MASK			(0x7ff << 8)
+#define OMAP3430_IVA2_DPLL_DIV_SHIFT			0
+#define OMAP3430_IVA2_DPLL_DIV_MASK			(0x7f << 0)
+
+/* CM_CLKSEL2_PLL_IVA2 */
+#define OMAP3430_IVA2_DPLL_CLKOUT_DIV_SHIFT		0
+#define OMAP3430_IVA2_DPLL_CLKOUT_DIV_MASK		(0x1f << 0)
+
+/* CM_CLKSTCTRL_IVA2 */
+#define OMAP3430_CLKTRCTRL_IVA2_SHIFT			0
+#define OMAP3430_CLKTRCTRL_IVA2_MASK			(0x3 << 0)
+
+/* CM_CLKSTST_IVA2 */
+#define OMAP3430_CLKACTIVITY_IVA2			(1 << 0)
+
+/* CM_REVISION specific bits */
+
+/* CM_SYSCONFIG specific bits */
+
+/* CM_CLKEN_PLL_MPU */
+#define OMAP3430_MPU_DPLL_RAMPTIME_SHIFT		8
+#define OMAP3430_MPU_DPLL_RAMPTIME_MASK			(0x3 << 8)
+#define OMAP3430_MPU_DPLL_FREQSEL_SHIFT			4
+#define OMAP3430_MPU_DPLL_FREQSEL_MASK			(0xf << 4)
+#define OMAP3430_EN_MPU_DPLL_DRIFTGUARD_SHIFT		3
+#define OMAP3430_EN_MPU_DPLL_DRIFTGUARD_MASK		(1 << 3)
+#define OMAP3430_EN_MPU_DPLL_SHIFT			0
+#define OMAP3430_EN_MPU_DPLL_MASK			(0x7 << 0)
+
+/* CM_IDLEST_MPU */
+#define OMAP3430_ST_MPU					(1 << 0)
+
+/* CM_IDLEST_PLL_MPU */
+#define OMAP3430_ST_MPU_CLK				(1 << 0)
+#define OMAP3430_ST_IVA2_CLK_MASK			(1 << 0)
+
+/* CM_IDLEST_PLL_MPU */
+#define OMAP3430_ST_MPU_CLK_MASK			(1 << 0)
+
+/* CM_AUTOIDLE_PLL_MPU */
+#define OMAP3430_AUTO_MPU_DPLL_SHIFT			0
+#define OMAP3430_AUTO_MPU_DPLL_MASK			(0x7 << 0)
+
+/* CM_CLKSEL1_PLL_MPU */
+#define OMAP3430_MPU_CLK_SRC_SHIFT			19
+#define OMAP3430_MPU_CLK_SRC_MASK			(0x3 << 19)
+#define OMAP3430_MPU_DPLL_MULT_SHIFT			8
+#define OMAP3430_MPU_DPLL_MULT_MASK			(0x7ff << 8)
+#define OMAP3430_MPU_DPLL_DIV_SHIFT			0
+#define OMAP3430_MPU_DPLL_DIV_MASK			(0x7f << 0)
+
+/* CM_CLKSEL2_PLL_MPU */
+#define OMAP3430_MPU_DPLL_CLKOUT_DIV_SHIFT		0
+#define OMAP3430_MPU_DPLL_CLKOUT_DIV_MASK		(0x1f << 0)
+
+/* CM_CLKSTCTRL_MPU */
+#define OMAP3430_CLKTRCTRL_MPU_SHIFT			0
+#define OMAP3430_CLKTRCTRL_MPU_MASK			(0x3 << 0)
+
+/* CM_CLKSTST_MPU */
+#define OMAP3430_CLKACTIVITY_MPU			(1 << 0)
+
+/* CM_FCLKEN1_CORE specific bits */
+
+/* CM_ICLKEN1_CORE specific bits */
+#define OMAP3430_EN_ICR					(1 << 29)
+#define OMAP3430_EN_ICR_SHIFT				29
+#define OMAP3430_EN_AES2				(1 << 28)
+#define OMAP3430_EN_AES2_SHIFT				28
+#define OMAP3430_EN_SHA12				(1 << 27)
+#define OMAP3430_EN_SHA12_SHIFT				27
+#define OMAP3430_EN_DES2				(1 << 26)
+#define OMAP3430_EN_DES2_SHIFT				26
+#define OMAP3430ES1_EN_FAC				(1 << 8)
+#define OMAP3430ES1_EN_FAC_SHIFT			8
+#define OMAP3430_EN_MAILBOXES				(1 << 7)
+#define OMAP3430_EN_MAILBOXES_SHIFT			7
+#define OMAP3430_EN_OMAPCTRL				(1 << 6)
+#define OMAP3430_EN_OMAPCTRL_SHIFT			6
+#define OMAP3430_EN_SDRC				(1 << 1)
+#define OMAP3430_EN_SDRC_SHIFT				1
+
+/* CM_ICLKEN2_CORE */
+#define OMAP3430_EN_PKA					(1 << 4)
+#define OMAP3430_EN_PKA_SHIFT				4
+#define OMAP3430_EN_AES1				(1 << 3)
+#define OMAP3430_EN_AES1_SHIFT				3
+#define OMAP3430_EN_RNG					(1 << 2)
+#define OMAP3430_EN_RNG_SHIFT				2
+#define OMAP3430_EN_SHA11				(1 << 1)
+#define OMAP3430_EN_SHA11_SHIFT				1
+#define OMAP3430_EN_DES1				(1 << 0)
+#define OMAP3430_EN_DES1_SHIFT				0
+
+/* CM_FCLKEN3_CORE specific bits */
+#define OMAP3430ES2_EN_TS_SHIFT				1
+#define OMAP3430ES2_EN_TS_MASK				(1 << 1)
+#define OMAP3430ES2_EN_CPEFUSE_SHIFT			0
+#define OMAP3430ES2_EN_CPEFUSE_MASK			(1 << 0)
+
+/* CM_IDLEST1_CORE specific bits */
+#define OMAP3430_ST_ICR					(1 << 29)
+#define OMAP3430_ST_AES2				(1 << 28)
+#define OMAP3430_ST_SHA12				(1 << 27)
+#define OMAP3430_ST_DES2				(1 << 26)
+#define OMAP3430_ST_MSPRO				(1 << 23)
+#define OMAP3430_ST_HDQ					(1 << 22)
+#define OMAP3430ES1_ST_FAC				(1 << 8)
+#define OMAP3430ES1_ST_MAILBOXES			(1 << 7)
+#define OMAP3430_ST_OMAPCTRL				(1 << 6)
+#define OMAP3430_ST_SDMA				(1 << 2)
+#define OMAP3430_ST_SDRC				(1 << 1)
+#define OMAP3430_ST_SSI					(1 << 0)
+
+/* CM_IDLEST2_CORE */
+#define OMAP3430_ST_PKA					(1 << 4)
+#define OMAP3430_ST_AES1				(1 << 3)
+#define OMAP3430_ST_RNG					(1 << 2)
+#define OMAP3430_ST_SHA11				(1 << 1)
+#define OMAP3430_ST_DES1				(1 << 0)
+
+/* CM_IDLEST3_CORE */
+#define OMAP3430ES2_ST_USBTLL_SHIFT			2
+#define OMAP3430ES2_ST_USBTLL_MASK			(1 << 2)
+
+/* CM_AUTOIDLE1_CORE */
+#define OMAP3430_AUTO_AES2				(1 << 28)
+#define OMAP3430_AUTO_AES2_SHIFT			28
+#define OMAP3430_AUTO_SHA12				(1 << 27)
+#define OMAP3430_AUTO_SHA12_SHIFT			27
+#define OMAP3430_AUTO_DES2				(1 << 26)
+#define OMAP3430_AUTO_DES2_SHIFT			26
+#define OMAP3430_AUTO_MMC2				(1 << 25)
+#define OMAP3430_AUTO_MMC2_SHIFT			25
+#define OMAP3430_AUTO_MMC1				(1 << 24)
+#define OMAP3430_AUTO_MMC1_SHIFT			24
+#define OMAP3430_AUTO_MSPRO				(1 << 23)
+#define OMAP3430_AUTO_MSPRO_SHIFT			23
+#define OMAP3430_AUTO_HDQ				(1 << 22)
+#define OMAP3430_AUTO_HDQ_SHIFT				22
+#define OMAP3430_AUTO_MCSPI4				(1 << 21)
+#define OMAP3430_AUTO_MCSPI4_SHIFT			21
+#define OMAP3430_AUTO_MCSPI3				(1 << 20)
+#define OMAP3430_AUTO_MCSPI3_SHIFT			20
+#define OMAP3430_AUTO_MCSPI2				(1 << 19)
+#define OMAP3430_AUTO_MCSPI2_SHIFT			19
+#define OMAP3430_AUTO_MCSPI1				(1 << 18)
+#define OMAP3430_AUTO_MCSPI1_SHIFT			18
+#define OMAP3430_AUTO_I2C3				(1 << 17)
+#define OMAP3430_AUTO_I2C3_SHIFT			17
+#define OMAP3430_AUTO_I2C2				(1 << 16)
+#define OMAP3430_AUTO_I2C2_SHIFT			16
+#define OMAP3430_AUTO_I2C1				(1 << 15)
+#define OMAP3430_AUTO_I2C1_SHIFT			15
+#define OMAP3430_AUTO_UART2				(1 << 14)
+#define OMAP3430_AUTO_UART2_SHIFT			14
+#define OMAP3430_AUTO_UART1				(1 << 13)
+#define OMAP3430_AUTO_UART1_SHIFT			13
+#define OMAP3430_AUTO_GPT11				(1 << 12)
+#define OMAP3430_AUTO_GPT11_SHIFT			12
+#define OMAP3430_AUTO_GPT10				(1 << 11)
+#define OMAP3430_AUTO_GPT10_SHIFT			11
+#define OMAP3430_AUTO_MCBSP5				(1 << 10)
+#define OMAP3430_AUTO_MCBSP5_SHIFT			10
+#define OMAP3430_AUTO_MCBSP1				(1 << 9)
+#define OMAP3430_AUTO_MCBSP1_SHIFT			9
+#define OMAP3430ES1_AUTO_FAC				(1 << 8)
+#define OMAP3430ES1_AUTO_FAC_SHIFT			8
+#define OMAP3430_AUTO_MAILBOXES				(1 << 7)
+#define OMAP3430_AUTO_MAILBOXES_SHIFT			7
+#define OMAP3430_AUTO_OMAPCTRL				(1 << 6)
+#define OMAP3430_AUTO_OMAPCTRL_SHIFT			6
+#define OMAP3430ES1_AUTO_FSHOSTUSB			(1 << 5)
+#define OMAP3430ES1_AUTO_FSHOSTUSB_SHIFT		5
+#define OMAP3430_AUTO_HSOTGUSB				(1 << 4)
+#define OMAP3430_AUTO_HSOTGUSB_SHIFT			4
+#define OMAP3430ES1_AUTO_D2D				(1 << 3)
+#define OMAP3430ES1_AUTO_D2D_SHIFT			3
+#define OMAP3430_AUTO_SSI				(1 << 0)
+#define OMAP3430_AUTO_SSI_SHIFT				0
+
+/* CM_AUTOIDLE2_CORE */
+#define OMAP3430_AUTO_PKA				(1 << 4)
+#define OMAP3430_AUTO_PKA_SHIFT				4
+#define OMAP3430_AUTO_AES1				(1 << 3)
+#define OMAP3430_AUTO_AES1_SHIFT			3
+#define OMAP3430_AUTO_RNG				(1 << 2)
+#define OMAP3430_AUTO_RNG_SHIFT				2
+#define OMAP3430_AUTO_SHA11				(1 << 1)
+#define OMAP3430_AUTO_SHA11_SHIFT			1
+#define OMAP3430_AUTO_DES1				(1 << 0)
+#define OMAP3430_AUTO_DES1_SHIFT			0
+
+/* CM_AUTOIDLE3_CORE */
+#define OMAP3430ES2_AUTO_USBTLL_SHIFT			2
+#define OMAP3430ES2_AUTO_USBTLL_MASK			(1 << 2)
+
+/* CM_CLKSEL_CORE */
+#define OMAP3430_CLKSEL_SSI_SHIFT			8
+#define OMAP3430_CLKSEL_SSI_MASK			(0xf << 8)
+#define OMAP3430_CLKSEL_GPT11_MASK			(1 << 7)
+#define OMAP3430_CLKSEL_GPT11_SHIFT			7
+#define OMAP3430_CLKSEL_GPT10_MASK			(1 << 6)
+#define OMAP3430_CLKSEL_GPT10_SHIFT			6
+#define OMAP3430ES1_CLKSEL_FSHOSTUSB_SHIFT		4
+#define OMAP3430ES1_CLKSEL_FSHOSTUSB_MASK		(0x3 << 4)
+#define OMAP3430_CLKSEL_L4_SHIFT			2
+#define OMAP3430_CLKSEL_L4_MASK				(0x3 << 2)
+#define OMAP3430_CLKSEL_L3_SHIFT			0
+#define OMAP3430_CLKSEL_L3_MASK				(0x3 << 0)
+
+/* CM_CLKSTCTRL_CORE */
+#define OMAP3430ES1_CLKTRCTRL_D2D_SHIFT			4
+#define OMAP3430ES1_CLKTRCTRL_D2D_MASK			(0x3 << 4)
+#define OMAP3430_CLKTRCTRL_L4_SHIFT			2
+#define OMAP3430_CLKTRCTRL_L4_MASK			(0x3 << 2)
+#define OMAP3430_CLKTRCTRL_L3_SHIFT			0
+#define OMAP3430_CLKTRCTRL_L3_MASK			(0x3 << 0)
+
+/* CM_CLKSTST_CORE */
+#define OMAP3430ES1_CLKACTIVITY_D2D			(1 << 2)
+#define OMAP3430_CLKACTIVITY_L4				(1 << 1)
+#define OMAP3430_CLKACTIVITY_L3				(1 << 0)
+
+/* CM_FCLKEN_GFX */
+#define OMAP3430ES1_EN_3D				(1 << 2)
+#define OMAP3430ES1_EN_3D_SHIFT				2
+#define OMAP3430ES1_EN_2D				(1 << 1)
+#define OMAP3430ES1_EN_2D_SHIFT				1
+
+/* CM_ICLKEN_GFX specific bits */
+
+/* CM_IDLEST_GFX specific bits */
+
+/* CM_CLKSEL_GFX specific bits */
+
+/* CM_SLEEPDEP_GFX specific bits */
+
+/* CM_CLKSTCTRL_GFX */
+#define OMAP3430ES1_CLKTRCTRL_GFX_SHIFT			0
+#define OMAP3430ES1_CLKTRCTRL_GFX_MASK			(0x3 << 0)
+
+/* CM_CLKSTST_GFX */
+#define OMAP3430ES1_CLKACTIVITY_GFX			(1 << 0)
+
+/* CM_FCLKEN_SGX */
+#define OMAP3430ES2_EN_SGX_SHIFT			1
+#define OMAP3430ES2_EN_SGX_MASK				(1 << 1)
+
+/* CM_CLKSEL_SGX */
+#define OMAP3430ES2_CLKSEL_SGX_SHIFT			0
+#define OMAP3430ES2_CLKSEL_SGX_MASK			(0x7 << 0)
+
+/* CM_FCLKEN_WKUP specific bits */
+#define OMAP3430ES2_EN_USIMOCP_SHIFT			9
+
+/* CM_ICLKEN_WKUP specific bits */
+#define OMAP3430_EN_WDT1				(1 << 4)
+#define OMAP3430_EN_WDT1_SHIFT				4
+#define OMAP3430_EN_32KSYNC				(1 << 2)
+#define OMAP3430_EN_32KSYNC_SHIFT			2
+
+/* CM_IDLEST_WKUP specific bits */
+#define OMAP3430_ST_WDT2				(1 << 5)
+#define OMAP3430_ST_WDT1				(1 << 4)
+#define OMAP3430_ST_32KSYNC				(1 << 2)
+
+/* CM_AUTOIDLE_WKUP */
+#define OMAP3430_AUTO_WDT2				(1 << 5)
+#define OMAP3430_AUTO_WDT2_SHIFT			5
+#define OMAP3430_AUTO_WDT1				(1 << 4)
+#define OMAP3430_AUTO_WDT1_SHIFT			4
+#define OMAP3430_AUTO_GPIO1				(1 << 3)
+#define OMAP3430_AUTO_GPIO1_SHIFT			3
+#define OMAP3430_AUTO_32KSYNC				(1 << 2)
+#define OMAP3430_AUTO_32KSYNC_SHIFT			2
+#define OMAP3430_AUTO_GPT12				(1 << 1)
+#define OMAP3430_AUTO_GPT12_SHIFT			1
+#define OMAP3430_AUTO_GPT1				(1 << 0)
+#define OMAP3430_AUTO_GPT1_SHIFT			0
+
+/* CM_CLKSEL_WKUP */
+#define OMAP3430ES2_CLKSEL_USIMOCP_MASK			(0xf << 3)
+#define OMAP3430_CLKSEL_RM_SHIFT			1
+#define OMAP3430_CLKSEL_RM_MASK				(0x3 << 1)
+#define OMAP3430_CLKSEL_GPT1_SHIFT			0
+#define OMAP3430_CLKSEL_GPT1_MASK			(1 << 0)
+
+/* CM_CLKEN_PLL */
+#define OMAP3430_PWRDN_EMU_PERIPH_SHIFT			31
+#define OMAP3430_PWRDN_CAM_SHIFT			30
+#define OMAP3430_PWRDN_DSS1_SHIFT			29
+#define OMAP3430_PWRDN_TV_SHIFT				28
+#define OMAP3430_PWRDN_96M_SHIFT			27
+#define OMAP3430_PERIPH_DPLL_RAMPTIME_SHIFT		24
+#define OMAP3430_PERIPH_DPLL_RAMPTIME_MASK		(0x3 << 24)
+#define OMAP3430_PERIPH_DPLL_FREQSEL_SHIFT		20
+#define OMAP3430_PERIPH_DPLL_FREQSEL_MASK		(0xf << 20)
+#define OMAP3430_EN_PERIPH_DPLL_DRIFTGUARD_SHIFT	19
+#define OMAP3430_EN_PERIPH_DPLL_DRIFTGUARD_MASK		(1 << 19)
+#define OMAP3430_EN_PERIPH_DPLL_SHIFT			16
+#define OMAP3430_EN_PERIPH_DPLL_MASK			(0x7 << 16)
+#define OMAP3430_PWRDN_EMU_CORE_SHIFT			12
+#define OMAP3430_CORE_DPLL_RAMPTIME_SHIFT		8
+#define OMAP3430_CORE_DPLL_RAMPTIME_MASK		(0x3 << 8)
+#define OMAP3430_CORE_DPLL_FREQSEL_SHIFT		4
+#define OMAP3430_CORE_DPLL_FREQSEL_MASK			(0xf << 4)
+#define OMAP3430_EN_CORE_DPLL_DRIFTGUARD_SHIFT		3
+#define OMAP3430_EN_CORE_DPLL_DRIFTGUARD_MASK		(1 << 3)
+#define OMAP3430_EN_CORE_DPLL_SHIFT			0
+#define OMAP3430_EN_CORE_DPLL_MASK			(0x7 << 0)
+
+/* CM_CLKEN2_PLL */
+#define OMAP3430ES2_EN_PERIPH2_DPLL_LPMODE_SHIFT		10
+#define OMAP3430ES2_PERIPH2_DPLL_RAMPTIME_MASK		(0x3 << 8)
+#define OMAP3430ES2_PERIPH2_DPLL_FREQSEL_SHIFT		4
+#define OMAP3430ES2_PERIPH2_DPLL_FREQSEL_MASK		(0xf << 4)
+#define OMAP3430ES2_EN_PERIPH2_DPLL_DRIFTGUARD_SHIFT	3
+#define OMAP3430ES2_EN_PERIPH2_DPLL_SHIFT		0
+#define OMAP3430ES2_EN_PERIPH2_DPLL_MASK		(0x7 << 0)
+
+/* CM_IDLEST_CKGEN */
+#define OMAP3430_ST_54M_CLK				(1 << 5)
+#define OMAP3430_ST_12M_CLK				(1 << 4)
+#define OMAP3430_ST_48M_CLK				(1 << 3)
+#define OMAP3430_ST_96M_CLK				(1 << 2)
+#define OMAP3430_ST_PERIPH_CLK				(1 << 1)
+#define OMAP3430_ST_CORE_CLK				(1 << 0)
+
+/* CM_IDLEST2_CKGEN */
+#define OMAP3430ES2_ST_120M_CLK_SHIFT			1
+#define OMAP3430ES2_ST_120M_CLK_MASK			(1 << 1)
+#define OMAP3430ES2_ST_PERIPH2_CLK_SHIFT		0
+#define OMAP3430ES2_ST_PERIPH2_CLK_MASK			(1 << 0)
+
+/* CM_AUTOIDLE_PLL */
+#define OMAP3430_AUTO_PERIPH_DPLL_SHIFT			3
+#define OMAP3430_AUTO_PERIPH_DPLL_MASK			(0x7 << 3)
+#define OMAP3430_AUTO_CORE_DPLL_SHIFT			0
+#define OMAP3430_AUTO_CORE_DPLL_MASK			(0x7 << 0)
+
+/* CM_CLKSEL1_PLL */
+/* Note that OMAP3430_CORE_DPLL_CLKOUT_DIV_MASK was (0x3 << 27) on 3430ES1 */
+#define OMAP3430_CORE_DPLL_CLKOUT_DIV_SHIFT		27
+#define OMAP3430_CORE_DPLL_CLKOUT_DIV_MASK		(0x1f << 27)
+#define OMAP3430_CORE_DPLL_MULT_SHIFT			16
+#define OMAP3430_CORE_DPLL_MULT_MASK			(0x7ff << 16)
+#define OMAP3430_CORE_DPLL_DIV_SHIFT			8
+#define OMAP3430_CORE_DPLL_DIV_MASK			(0x7f << 8)
+#define OMAP3430_SOURCE_54M				(1 << 5)
+#define OMAP3430_SOURCE_48M				(1 << 3)
+
+/* CM_CLKSEL2_PLL */
+#define OMAP3430_PERIPH_DPLL_MULT_SHIFT			8
+#define OMAP3430_PERIPH_DPLL_MULT_MASK			(0x7ff << 8)
+#define OMAP3430_PERIPH_DPLL_DIV_SHIFT			0
+#define OMAP3430_PERIPH_DPLL_DIV_MASK			(0x7f << 0)
+
+/* CM_CLKSEL3_PLL */
+#define OMAP3430_DIV_96M_SHIFT				0
+#define OMAP3430_DIV_96M_MASK				(0x1f << 0)
+
+/* CM_CLKSEL4_PLL */
+#define OMAP3430ES2_PERIPH2_DPLL_MULT_SHIFT		8
+#define OMAP3430ES2_PERIPH2_DPLL_MULT_MASK		(0x7ff << 8)
+#define OMAP3430ES2_PERIPH2_DPLL_DIV_SHIFT		0
+#define OMAP3430ES2_PERIPH2_DPLL_DIV_MASK		(0x7f << 0)
+
+/* CM_CLKSEL5_PLL */
+#define OMAP3430ES2_DIV_120M_SHIFT			0
+#define OMAP3430ES2_DIV_120M_MASK			(0x1f << 0)
+
+/* CM_CLKOUT_CTRL */
+#define OMAP3430_CLKOUT2_EN_SHIFT			7
+#define OMAP3430_CLKOUT2_EN				(1 << 7)
+#define OMAP3430_CLKOUT2_DIV_SHIFT			3
+#define OMAP3430_CLKOUT2_DIV_MASK			(0x7 << 3)
+#define OMAP3430_CLKOUT2SOURCE_SHIFT			0
+#define OMAP3430_CLKOUT2SOURCE_MASK			(0x3 << 0)
+
+/* CM_FCLKEN_DSS */
+#define OMAP3430_EN_TV					(1 << 2)
+#define OMAP3430_EN_TV_SHIFT				2
+#define OMAP3430_EN_DSS2				(1 << 1)
+#define OMAP3430_EN_DSS2_SHIFT				1
+#define OMAP3430_EN_DSS1				(1 << 0)
+#define OMAP3430_EN_DSS1_SHIFT				0
+
+/* CM_ICLKEN_DSS */
+#define OMAP3430_CM_ICLKEN_DSS_EN_DSS			(1 << 0)
+#define OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT		0
+
+/* CM_IDLEST_DSS */
+#define OMAP3430_ST_DSS					(1 << 0)
+
+/* CM_AUTOIDLE_DSS */
+#define OMAP3430_AUTO_DSS				(1 << 0)
+#define OMAP3430_AUTO_DSS_SHIFT				0
+
+/* CM_CLKSEL_DSS */
+#define OMAP3430_CLKSEL_TV_SHIFT			8
+#define OMAP3430_CLKSEL_TV_MASK				(0x1f << 8)
+#define OMAP3430_CLKSEL_DSS1_SHIFT			0
+#define OMAP3430_CLKSEL_DSS1_MASK			(0x1f << 0)
+
+/* CM_SLEEPDEP_DSS specific bits */
+
+/* CM_CLKSTCTRL_DSS */
+#define OMAP3430_CLKTRCTRL_DSS_SHIFT			0
+#define OMAP3430_CLKTRCTRL_DSS_MASK			(0x3 << 0)
+
+/* CM_CLKSTST_DSS */
+#define OMAP3430_CLKACTIVITY_DSS			(1 << 0)
+
+/* CM_FCLKEN_CAM specific bits */
+
+/* CM_ICLKEN_CAM specific bits */
+
+/* CM_IDLEST_CAM */
+#define OMAP3430_ST_CAM					(1 << 0)
+
+/* CM_AUTOIDLE_CAM */
+#define OMAP3430_AUTO_CAM				(1 << 0)
+#define OMAP3430_AUTO_CAM_SHIFT				0
+
+/* CM_CLKSEL_CAM */
+#define OMAP3430_CLKSEL_CAM_SHIFT			0
+#define OMAP3430_CLKSEL_CAM_MASK			(0x1f << 0)
+
+/* CM_SLEEPDEP_CAM specific bits */
+
+/* CM_CLKSTCTRL_CAM */
+#define OMAP3430_CLKTRCTRL_CAM_SHIFT			0
+#define OMAP3430_CLKTRCTRL_CAM_MASK			(0x3 << 0)
+
+/* CM_CLKSTST_CAM */
+#define OMAP3430_CLKACTIVITY_CAM			(1 << 0)
+
+/* CM_FCLKEN_PER specific bits */
+
+/* CM_ICLKEN_PER specific bits */
+
+/* CM_IDLEST_PER */
+#define OMAP3430_ST_WDT3				(1 << 12)
+#define OMAP3430_ST_MCBSP4				(1 << 2)
+#define OMAP3430_ST_MCBSP3				(1 << 1)
+#define OMAP3430_ST_MCBSP2				(1 << 0)
+
+/* CM_AUTOIDLE_PER */
+#define OMAP3430_AUTO_GPIO6				(1 << 17)
+#define OMAP3430_AUTO_GPIO6_SHIFT			17
+#define OMAP3430_AUTO_GPIO5				(1 << 16)
+#define OMAP3430_AUTO_GPIO5_SHIFT			16
+#define OMAP3430_AUTO_GPIO4				(1 << 15)
+#define OMAP3430_AUTO_GPIO4_SHIFT			15
+#define OMAP3430_AUTO_GPIO3				(1 << 14)
+#define OMAP3430_AUTO_GPIO3_SHIFT			14
+#define OMAP3430_AUTO_GPIO2				(1 << 13)
+#define OMAP3430_AUTO_GPIO2_SHIFT			13
+#define OMAP3430_AUTO_WDT3				(1 << 12)
+#define OMAP3430_AUTO_WDT3_SHIFT			12
+#define OMAP3430_AUTO_UART3				(1 << 11)
+#define OMAP3430_AUTO_UART3_SHIFT			11
+#define OMAP3430_AUTO_GPT9				(1 << 10)
+#define OMAP3430_AUTO_GPT9_SHIFT			10
+#define OMAP3430_AUTO_GPT8				(1 << 9)
+#define OMAP3430_AUTO_GPT8_SHIFT			9
+#define OMAP3430_AUTO_GPT7				(1 << 8)
+#define OMAP3430_AUTO_GPT7_SHIFT			8
+#define OMAP3430_AUTO_GPT6				(1 << 7)
+#define OMAP3430_AUTO_GPT6_SHIFT			7
+#define OMAP3430_AUTO_GPT5				(1 << 6)
+#define OMAP3430_AUTO_GPT5_SHIFT			6
+#define OMAP3430_AUTO_GPT4				(1 << 5)
+#define OMAP3430_AUTO_GPT4_SHIFT			5
+#define OMAP3430_AUTO_GPT3				(1 << 4)
+#define OMAP3430_AUTO_GPT3_SHIFT			4
+#define OMAP3430_AUTO_GPT2				(1 << 3)
+#define OMAP3430_AUTO_GPT2_SHIFT			3
+#define OMAP3430_AUTO_MCBSP4				(1 << 2)
+#define OMAP3430_AUTO_MCBSP4_SHIFT			2
+#define OMAP3430_AUTO_MCBSP3				(1 << 1)
+#define OMAP3430_AUTO_MCBSP3_SHIFT			1
+#define OMAP3430_AUTO_MCBSP2				(1 << 0)
+#define OMAP3430_AUTO_MCBSP2_SHIFT			0
+
+/* CM_CLKSEL_PER */
+#define OMAP3430_CLKSEL_GPT9_MASK			(1 << 7)
+#define OMAP3430_CLKSEL_GPT9_SHIFT			7
+#define OMAP3430_CLKSEL_GPT8_MASK			(1 << 6)
+#define OMAP3430_CLKSEL_GPT8_SHIFT			6
+#define OMAP3430_CLKSEL_GPT7_MASK			(1 << 5)
+#define OMAP3430_CLKSEL_GPT7_SHIFT			5
+#define OMAP3430_CLKSEL_GPT6_MASK			(1 << 4)
+#define OMAP3430_CLKSEL_GPT6_SHIFT			4
+#define OMAP3430_CLKSEL_GPT5_MASK			(1 << 3)
+#define OMAP3430_CLKSEL_GPT5_SHIFT			3
+#define OMAP3430_CLKSEL_GPT4_MASK			(1 << 2)
+#define OMAP3430_CLKSEL_GPT4_SHIFT			2
+#define OMAP3430_CLKSEL_GPT3_MASK			(1 << 1)
+#define OMAP3430_CLKSEL_GPT3_SHIFT			1
+#define OMAP3430_CLKSEL_GPT2_MASK			(1 << 0)
+#define OMAP3430_CLKSEL_GPT2_SHIFT			0
+
+/* CM_SLEEPDEP_PER specific bits */
+#define OMAP3430_CM_SLEEPDEP_PER_EN_IVA2		(1 << 2)
+
+/* CM_CLKSTCTRL_PER */
+#define OMAP3430_CLKTRCTRL_PER_SHIFT			0
+#define OMAP3430_CLKTRCTRL_PER_MASK			(0x3 << 0)
+
+/* CM_CLKSTST_PER */
+#define OMAP3430_CLKACTIVITY_PER			(1 << 0)
+
+/* CM_CLKSEL1_EMU */
+#define OMAP3430_DIV_DPLL4_SHIFT			24
+#define OMAP3430_DIV_DPLL4_MASK				(0x1f << 24)
+#define OMAP3430_DIV_DPLL3_SHIFT			16
+#define OMAP3430_DIV_DPLL3_MASK				(0x1f << 16)
+#define OMAP3430_CLKSEL_TRACECLK_SHIFT			11
+#define OMAP3430_CLKSEL_TRACECLK_MASK			(0x7 << 11)
+#define OMAP3430_CLKSEL_PCLK_SHIFT			8
+#define OMAP3430_CLKSEL_PCLK_MASK			(0x7 << 8)
+#define OMAP3430_CLKSEL_PCLKX2_SHIFT			6
+#define OMAP3430_CLKSEL_PCLKX2_MASK			(0x3 << 6)
+#define OMAP3430_CLKSEL_ATCLK_SHIFT			4
+#define OMAP3430_CLKSEL_ATCLK_MASK			(0x3 << 4)
+#define OMAP3430_TRACE_MUX_CTRL_SHIFT			2
+#define OMAP3430_TRACE_MUX_CTRL_MASK			(0x3 << 2)
+#define OMAP3430_MUX_CTRL_SHIFT				0
+#define OMAP3430_MUX_CTRL_MASK				(0x3 << 0)
+
+/* CM_CLKSTCTRL_EMU */
+#define OMAP3430_CLKTRCTRL_EMU_SHIFT			0
+#define OMAP3430_CLKTRCTRL_EMU_MASK			(0x3 << 0)
+
+/* CM_CLKSTST_EMU */
+#define OMAP3430_CLKACTIVITY_EMU			(1 << 0)
+
+/* CM_CLKSEL2_EMU specific bits */
+#define OMAP3430_CORE_DPLL_EMU_MULT_SHIFT		8
+#define OMAP3430_CORE_DPLL_EMU_MULT_MASK		(0x7ff << 8)
+#define OMAP3430_CORE_DPLL_EMU_DIV_SHIFT		0
+#define OMAP3430_CORE_DPLL_EMU_DIV_MASK			(0x7f << 0)
+
+/* CM_CLKSEL3_EMU specific bits */
+#define OMAP3430_PERIPH_DPLL_EMU_MULT_SHIFT		8
+#define OMAP3430_PERIPH_DPLL_EMU_MULT_MASK		(0x7ff << 8)
+#define OMAP3430_PERIPH_DPLL_EMU_DIV_SHIFT		0
+#define OMAP3430_PERIPH_DPLL_EMU_DIV_MASK		(0x7f << 0)
+
+/* CM_POLCTRL */
+#define OMAP3430_CLKOUT2_POL				(1 << 0)
+
+/* CM_IDLEST_NEON */
+#define OMAP3430_ST_NEON				(1 << 0)
+
+/* CM_CLKSTCTRL_NEON */
+#define OMAP3430_CLKTRCTRL_NEON_SHIFT			0
+#define OMAP3430_CLKTRCTRL_NEON_MASK			(0x3 << 0)
+
+/* CM_FCLKEN_USBHOST */
+#define OMAP3430ES2_EN_USBHOST2_SHIFT			1
+#define OMAP3430ES2_EN_USBHOST2_MASK			(1 << 1)
+#define OMAP3430ES2_EN_USBHOST1_SHIFT			0
+#define OMAP3430ES2_EN_USBHOST1_MASK			(1 << 0)
+
+/* CM_ICLKEN_USBHOST */
+#define OMAP3430ES2_EN_USBHOST_SHIFT			0
+#define OMAP3430ES2_EN_USBHOST_MASK			(1 << 0)
+
+/* CM_IDLEST_USBHOST */
+
+/* CM_AUTOIDLE_USBHOST */
+#define OMAP3430ES2_AUTO_USBHOST_SHIFT			0
+#define OMAP3430ES2_AUTO_USBHOST_MASK			(1 << 0)
+
+/* CM_SLEEPDEP_USBHOST */
+#define OMAP3430ES2_EN_MPU_SHIFT			1
+#define OMAP3430ES2_EN_MPU_MASK				(1 << 1)
+#define OMAP3430ES2_EN_IVA2_SHIFT			2
+#define OMAP3430ES2_EN_IVA2_MASK			(1 << 2)
+
+/* CM_CLKSTCTRL_USBHOST */
+#define OMAP3430ES2_CLKTRCTRL_USBHOST_SHIFT		0
+#define OMAP3430ES2_CLKTRCTRL_USBHOST_MASK		(3 << 0)
+
+
+
+#endif
diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h
new file mode 100644
index 0000000..8489f30
--- /dev/null
+++ b/arch/arm/mach-omap2/cm.h
@@ -0,0 +1,124 @@
+#ifndef __ARCH_ASM_MACH_OMAP2_CM_H
+#define __ARCH_ASM_MACH_OMAP2_CM_H
+
+/*
+ * OMAP2/3 Clock Management (CM) register definitions
+ *
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "prcm-common.h"
+
+#ifndef __ASSEMBLER__
+#define OMAP_CM_REGADDR(module, reg)					\
+	(void __iomem *)IO_ADDRESS(OMAP2_CM_BASE + (module) + (reg))
+#else
+#define OMAP2420_CM_REGADDR(module, reg)				\
+			IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
+#define OMAP2430_CM_REGADDR(module, reg)				\
+			IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
+#define OMAP34XX_CM_REGADDR(module, reg)				\
+			IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
+#endif
+
+/*
+ * Architecture-specific global CM registers
+ * Use cm_{read,write}_reg() with these registers.
+ * These registers appear once per CM module.
+ */
+
+#define OMAP3430_CM_REVISION		OMAP_CM_REGADDR(OCP_MOD, 0x0000)
+#define OMAP3430_CM_SYSCONFIG		OMAP_CM_REGADDR(OCP_MOD, 0x0010)
+#define OMAP3430_CM_POLCTRL		OMAP_CM_REGADDR(OCP_MOD, 0x009c)
+
+#define OMAP3430_CM_CLKOUT_CTRL		OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
+
+/*
+ * Module specific CM registers from CM_BASE + domain offset
+ * Use cm_{read,write}_mod_reg() with these registers.
+ * These register offsets generally appear in more than one PRCM submodule.
+ */
+
+/* Common between 24xx and 34xx */
+
+#define CM_FCLKEN					0x0000
+#define CM_FCLKEN1					CM_FCLKEN
+#define CM_CLKEN					CM_FCLKEN
+#define CM_ICLKEN					0x0010
+#define CM_ICLKEN1					CM_ICLKEN
+#define CM_ICLKEN2					0x0014
+#define CM_ICLKEN3					0x0018
+#define CM_IDLEST					0x0020
+#define CM_IDLEST1					CM_IDLEST
+#define CM_IDLEST2					0x0024
+#define CM_AUTOIDLE					0x0030
+#define CM_AUTOIDLE1					CM_AUTOIDLE
+#define CM_AUTOIDLE2					0x0034
+#define CM_AUTOIDLE3					0x0038
+#define CM_CLKSEL					0x0040
+#define CM_CLKSEL1					CM_CLKSEL
+#define CM_CLKSEL2					0x0044
+#define CM_CLKSTCTRL					0x0048
+
+
+/* Architecture-specific registers */
+
+#define OMAP24XX_CM_FCLKEN2				0x0004
+#define OMAP24XX_CM_ICLKEN4				0x001c
+#define OMAP24XX_CM_AUTOIDLE4				0x003c
+
+#define OMAP2430_CM_IDLEST3				0x0028
+
+#define OMAP3430_CM_CLKEN_PLL				0x0004
+#define OMAP3430ES2_CM_CLKEN2				0x0004
+#define OMAP3430ES2_CM_FCLKEN3				0x0008
+#define OMAP3430_CM_IDLEST_PLL				CM_IDLEST2
+#define OMAP3430_CM_AUTOIDLE_PLL			CM_AUTOIDLE2
+#define OMAP3430_CM_CLKSEL1				CM_CLKSEL
+#define OMAP3430_CM_CLKSEL1_PLL				CM_CLKSEL
+#define OMAP3430_CM_CLKSEL2_PLL				CM_CLKSEL2
+#define OMAP3430_CM_SLEEPDEP				CM_CLKSEL2
+#define OMAP3430_CM_CLKSEL3				CM_CLKSTCTRL
+#define OMAP3430_CM_CLKSTST				0x004c
+#define OMAP3430ES2_CM_CLKSEL4				0x004c
+#define OMAP3430ES2_CM_CLKSEL5				0x0050
+#define OMAP3430_CM_CLKSEL2_EMU				0x0050
+#define OMAP3430_CM_CLKSEL3_EMU				0x0054
+
+
+/* Clock management domain register get/set */
+
+#ifndef __ASSEMBLER__
+static inline void cm_write_mod_reg(u32 val, s16 module, s16 idx)
+{
+	__raw_writel(val, OMAP_CM_REGADDR(module, idx));
+}
+
+static inline u32 cm_read_mod_reg(s16 module, s16 idx)
+{
+	return __raw_readl(OMAP_CM_REGADDR(module, idx));
+}
+#endif
+
+/* CM register bits shared between 24XX and 3430 */
+
+/* CM_CLKSEL_GFX */
+#define OMAP_CLKSEL_GFX_SHIFT				0
+#define OMAP_CLKSEL_GFX_MASK				(0x7 << 0)
+
+/* CM_ICLKEN_GFX */
+#define OMAP_EN_GFX_SHIFT				0
+#define OMAP_EN_GFX					(1 << 0)
+
+/* CM_IDLEST_GFX */
+#define OMAP_ST_GFX					(1 << 0)
+
+
+#endif
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
new file mode 100644
index 0000000..a5d86a4
--- /dev/null
+++ b/arch/arm/mach-omap2/control.c
@@ -0,0 +1,74 @@
+/*
+ * OMAP2/3 System Control Module register access
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Copyright (C) 2007 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+
+#include <asm/io.h>
+
+#include <asm/arch/control.h>
+
+static u32 omap2_ctrl_base;
+
+#define OMAP_CTRL_REGADDR(reg)	(void __iomem *)IO_ADDRESS(omap2_ctrl_base \
+								+ (reg))
+
+void omap_ctrl_base_set(u32 base)
+{
+	omap2_ctrl_base = base;
+}
+
+u32 omap_ctrl_base_get(void)
+{
+	return omap2_ctrl_base;
+}
+
+u8 omap_ctrl_readb(u16 offset)
+{
+	return __raw_readb(OMAP_CTRL_REGADDR(offset));
+}
+
+u16 omap_ctrl_readw(u16 offset)
+{
+	return __raw_readw(OMAP_CTRL_REGADDR(offset));
+}
+
+u32 omap_ctrl_readl(u16 offset)
+{
+	return __raw_readl(OMAP_CTRL_REGADDR(offset));
+}
+
+void omap_ctrl_writeb(u8 val, u16 offset)
+{
+	pr_debug("omap_ctrl_writeb: writing 0x%0x to 0x%0x\n", val,
+		 (u32)OMAP_CTRL_REGADDR(offset));
+
+	__raw_writeb(val, OMAP_CTRL_REGADDR(offset));
+}
+
+void omap_ctrl_writew(u16 val, u16 offset)
+{
+	pr_debug("omap_ctrl_writew: writing 0x%0x to 0x%0x\n", val,
+		 (u32)OMAP_CTRL_REGADDR(offset));
+
+	__raw_writew(val, OMAP_CTRL_REGADDR(offset));
+}
+
+void omap_ctrl_writel(u32 val, u16 offset)
+{
+	pr_debug("omap_ctrl_writel: writing 0x%0x to 0x%0x\n", val,
+		 (u32)OMAP_CTRL_REGADDR(offset));
+
+	__raw_writel(val, OMAP_CTRL_REGADDR(offset));
+}
+
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 5a4cc20..02cede2 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -69,7 +69,7 @@ static void __iomem *gpmc_base =
 static void __iomem *gpmc_cs_base =
 	(void __iomem *) IO_ADDRESS(GPMC_BASE) + GPMC_CS0;
 
-static struct clk *gpmc_l3_clk;
+static struct clk *gpmc_fck;
 
 static void gpmc_write_reg(int idx, u32 val)
 {
@@ -94,11 +94,10 @@ u32 gpmc_cs_read_reg(int cs, int idx)
 	return __raw_readl(gpmc_cs_base + (cs * GPMC_CS_SIZE) + idx);
 }
 
-/* TODO: Add support for gpmc_fck to clock framework and use it */
 unsigned long gpmc_get_fclk_period(void)
 {
 	/* In picoseconds */
-	return 1000000000 / ((clk_get_rate(gpmc_l3_clk)) / 1000);
+	return 1000000000 / ((clk_get_rate(gpmc_fck)) / 1000);
 }
 
 unsigned int gpmc_ns_to_ticks(unsigned int time_ns)
@@ -398,8 +397,11 @@ void __init gpmc_init(void)
 {
 	u32 l;
 
-	gpmc_l3_clk = clk_get(NULL, "core_l3_ck");
-	BUG_ON(IS_ERR(gpmc_l3_clk));
+	gpmc_fck = clk_get(NULL, "gpmc_fck"); /* Always on ENABLE_ON_INIT */
+	if (IS_ERR(gpmc_fck))
+		WARN_ON(1);
+	else
+		clk_enable(gpmc_fck);
 
 	l = gpmc_read_reg(GPMC_REVISION);
 	printk(KERN_INFO "GPMC revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f);
diff --git a/arch/arm/mach-omap2/memory.c b/arch/arm/mach-omap2/memory.c
index 3e5d8cd..1247908 100644
--- a/arch/arm/mach-omap2/memory.c
+++ b/arch/arm/mach-omap2/memory.c
@@ -27,11 +27,16 @@
 #include <asm/arch/clock.h>
 #include <asm/arch/sram.h>
 
-#include "prcm-regs.h"
+#include "prm.h"
+
 #include "memory.h"
+#include "sdrc.h"
 
+unsigned long omap2_sdrc_base;
+unsigned long omap2_sms_base;
 
 static struct memory_timings mem_timings;
+static u32 curr_perf_level = CORE_CLK_SRC_DPLL_X2;
 
 u32 omap2_memory_get_slow_dll_ctrl(void)
 {
@@ -48,12 +53,60 @@ u32 omap2_memory_get_type(void)
 	return mem_timings.m_type;
 }
 
+/*
+ * Check the DLL lock state, and return tue if running in unlock mode.
+ * This is needed to compensate for the shifted DLL value in unlock mode.
+ */
+u32 omap2_dll_force_needed(void)
+{
+	/* dlla and dllb are a set */
+	u32 dll_state = sdrc_read_reg(SDRC_DLLA_CTRL);
+
+	if ((dll_state & (1 << 2)) == (1 << 2))
+		return 1;
+	else
+		return 0;
+}
+
+/*
+ * 'level' is the value to store to CM_CLKSEL2_PLL.CORE_CLK_SRC.
+ * Practical values are CORE_CLK_SRC_DPLL (for CORE_CLK = DPLL_CLK) or
+ * CORE_CLK_SRC_DPLL_X2 (for CORE_CLK = * DPLL_CLK * 2)
+ */
+u32 omap2_reprogram_sdrc(u32 level, u32 force)
+{
+	u32 dll_ctrl, m_type;
+	u32 prev = curr_perf_level;
+	unsigned long flags;
+
+	if ((curr_perf_level == level) && !force)
+		return prev;
+
+	if (level == CORE_CLK_SRC_DPLL) {
+		dll_ctrl = omap2_memory_get_slow_dll_ctrl();
+	} else if (level == CORE_CLK_SRC_DPLL_X2) {
+		dll_ctrl = omap2_memory_get_fast_dll_ctrl();
+	} else {
+		return prev;
+	}
+
+	m_type = omap2_memory_get_type();
+
+	local_irq_save(flags);
+	__raw_writel(0xffff, OMAP24XX_PRCM_VOLTSETUP);
+	omap2_sram_reprogram_sdrc(level, dll_ctrl, m_type);
+	curr_perf_level = level;
+	local_irq_restore(flags);
+
+	return prev;
+}
+
 void omap2_init_memory_params(u32 force_lock_to_unlock_mode)
 {
 	unsigned long dll_cnt;
 	u32 fast_dll = 0;
 
-	mem_timings.m_type = !((SDRC_MR_0 & 0x3) == 0x1); /* DDR = 1, SDR = 0 */
+	mem_timings.m_type = !((sdrc_read_reg(SDRC_MR_0) & 0x3) == 0x1); /* DDR = 1, SDR = 0 */
 
 	/* 2422 es2.05 and beyond has a single SIP DDR instead of 2 like others.
 	 * In the case of 2422, its ok to use CS1 instead of CS0.
@@ -73,11 +126,11 @@ void omap2_init_memory_params(u32 force_lock_to_unlock_mode)
 		mem_timings.dll_mode = M_LOCK;
 
 	if (mem_timings.base_cs == 0) {
-		fast_dll = SDRC_DLLA_CTRL;
-		dll_cnt = SDRC_DLLA_STATUS & 0xff00;
+		fast_dll = sdrc_read_reg(SDRC_DLLA_CTRL);
+		dll_cnt = sdrc_read_reg(SDRC_DLLA_STATUS) & 0xff00;
 	} else {
-		fast_dll = SDRC_DLLB_CTRL;
-		dll_cnt = SDRC_DLLB_STATUS & 0xff00;
+		fast_dll = sdrc_read_reg(SDRC_DLLB_CTRL);
+		dll_cnt = sdrc_read_reg(SDRC_DLLB_STATUS) & 0xff00;
 	}
 	if (force_lock_to_unlock_mode) {
 		fast_dll &= ~0xff00;
@@ -106,14 +159,13 @@ void __init omap2_init_memory(void)
 {
 	u32 l;
 
-	l = SMS_SYSCONFIG;
+	l = sms_read_reg(SMS_SYSCONFIG);
 	l &= ~(0x3 << 3);
 	l |= (0x2 << 3);
-	SMS_SYSCONFIG = l;
+	sms_write_reg(l, SMS_SYSCONFIG);
 
-	l = SDRC_SYSCONFIG;
+	l = sdrc_read_reg(SDRC_SYSCONFIG);
 	l &= ~(0x3 << 3);
 	l |= (0x2 << 3);
-	SDRC_SYSCONFIG = l;
-
+	sdrc_write_reg(l, SDRC_SYSCONFIG);
 }
diff --git a/arch/arm/mach-omap2/memory.h b/arch/arm/mach-omap2/memory.h
index d212eea..9a280b5 100644
--- a/arch/arm/mach-omap2/memory.h
+++ b/arch/arm/mach-omap2/memory.h
@@ -32,3 +32,5 @@ extern void omap2_init_memory_params(u32 force_lock_to_unlock_mode);
 extern u32 omap2_memory_get_slow_dll_ctrl(void);
 extern u32 omap2_memory_get_fast_dll_ctrl(void);
 extern u32 omap2_memory_get_type(void);
+u32 omap2_dll_force_needed(void);
+u32 omap2_reprogram_sdrc(u32 level, u32 force);
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 0575097..9307700 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -1,11 +1,12 @@
 /*
  * linux/arch/arm/mach-omap2/mux.c
  *
- * OMAP1 pin multiplexing configurations
+ * OMAP2 pin multiplexing configurations
  *
- * Copyright (C) 2003 - 2005 Nokia Corporation
+ * Copyright (C) 2004 - 2008 Texas Instruments Inc.
+ * Copyright (C) 2003 - 2008 Nokia Corporation
  *
- * Written by Tony Lindgren <tony.lindgren@nokia.com>
+ * Written by Tony Lindgren
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -28,13 +29,17 @@
 #include <asm/io.h>
 #include <linux/spinlock.h>
 
+#include <asm/arch/control.h>
 #include <asm/arch/mux.h>
 
 #ifdef CONFIG_OMAP_MUX
 
+static struct omap_mux_cfg arch_mux_cfg;
+
 /* NOTE: See mux.h for the enumeration */
 
-struct pin_config __initdata_or_module omap24xx_pins[] = {
+#ifdef CONFIG_ARCH_OMAP24XX
+static struct pin_config __initdata_or_module omap24xx_pins[] = {
 /*
  *	description			mux	mux	pull	pull	debug
  *					offset	mode	ena	type
@@ -77,7 +82,12 @@ MUX_CFG_24XX("AA12_242X_GPIO17",	0x0e9,	3,	0,	0,	1)
 MUX_CFG_24XX("AA8_242X_GPIO58",		0x0ea,	3,	0,	0,	1)
 MUX_CFG_24XX("Y20_24XX_GPIO60",		0x12c,	3,	0,	0,	1)
 MUX_CFG_24XX("W4__24XX_GPIO74",		0x0f2,	3,	0,	0,	1)
+MUX_CFG_24XX("N15_24XX_GPIO85",		0x103,	3,	0,	0,	1)
 MUX_CFG_24XX("M15_24XX_GPIO92",		0x10a,	3,	0,	0,	1)
+MUX_CFG_24XX("P20_24XX_GPIO93",		0x10b,	3,	0,	0,	1)
+MUX_CFG_24XX("P18_24XX_GPIO95",		0x10d,	3,	0,	0,	1)
+MUX_CFG_24XX("M18_24XX_GPIO96",		0x10e,	3,	0,	0,	1)
+MUX_CFG_24XX("L14_24XX_GPIO97",		0x10f,	3,	0,	0,	1)
 MUX_CFG_24XX("J15_24XX_GPIO99",		0x113,	3,	1,	1,	1)
 MUX_CFG_24XX("V14_24XX_GPIO117",	0x128,	3,	1,	0,	1)
 MUX_CFG_24XX("P14_24XX_GPIO125",	0x140,	3,	1,	1,	1)
@@ -102,9 +112,6 @@ MUX_CFG_24XX("G4_242X_DMAREQ3",		0x073,	2,	0,	0,	1)
 MUX_CFG_24XX("D3_242X_DMAREQ4",		0x072,	2,	0,	0,	1)
 MUX_CFG_24XX("E3_242X_DMAREQ5",		0x071,	2,	0,	0,	1)
 
-/* TSC IRQ */
-MUX_CFG_24XX("P20_24XX_TSC_IRQ",	0x108,	0,	0,	0,	1)
-
 /* UART3 */
 MUX_CFG_24XX("K15_24XX_UART3_TX",	0x118,	0,	0,	0,	1)
 MUX_CFG_24XX("K14_24XX_UART3_RX",	0x119,	0,	0,	0,	1)
@@ -167,12 +174,108 @@ MUX_CFG_24XX("B3__24XX_KBR5",		0x30,	3,	1,	1,	1)
 MUX_CFG_24XX("AA4_24XX_KBC2",		0xe7,	3,	0,	0,	1)
 MUX_CFG_24XX("B13_24XX_KBC6",		0x110,	3,	0,	0,	1)
 
+/* 2430 USB */
+MUX_CFG_24XX("AD9_2430_USB0_PUEN",	0x133,	4,	0,	0,	1)
+MUX_CFG_24XX("Y11_2430_USB0_VP",	0x134,	4,	0,	0,	1)
+MUX_CFG_24XX("AD7_2430_USB0_VM",	0x135,	4,	0,	0,	1)
+MUX_CFG_24XX("AE7_2430_USB0_RCV",	0x136,	4,	0,	0,	1)
+MUX_CFG_24XX("AD4_2430_USB0_TXEN",	0x137,	4,	0,	0,	1)
+MUX_CFG_24XX("AF9_2430_USB0_SE0",	0x138,	4,	0,	0,	1)
+MUX_CFG_24XX("AE6_2430_USB0_DAT",	0x139,	4,	0,	0,	1)
+MUX_CFG_24XX("AD24_2430_USB1_SE0",	0x107,	2,	0,	0,	1)
+MUX_CFG_24XX("AB24_2430_USB1_RCV",	0x108,	2,	0,	0,	1)
+MUX_CFG_24XX("Y25_2430_USB1_TXEN",	0x109,	2,	0,	0,	1)
+MUX_CFG_24XX("AA26_2430_USB1_DAT",	0x10A,	2,	0,	0,	1)
+
+/* 2430 HS-USB */
+MUX_CFG_24XX("AD9_2430_USB0HS_DATA3",	0x133,	0,	0,	0,	1)
+MUX_CFG_24XX("Y11_2430_USB0HS_DATA4",	0x134,	0,	0,	0,	1)
+MUX_CFG_24XX("AD7_2430_USB0HS_DATA5",	0x135,	0,	0,	0,	1)
+MUX_CFG_24XX("AE7_2430_USB0HS_DATA6",	0x136,	0,	0,	0,	1)
+MUX_CFG_24XX("AD4_2430_USB0HS_DATA2",	0x137,	0,	0,	0,	1)
+MUX_CFG_24XX("AF9_2430_USB0HS_DATA0",	0x138,	0,	0,	0,	1)
+MUX_CFG_24XX("AE6_2430_USB0HS_DATA1",	0x139,	0,	0,	0,	1)
+MUX_CFG_24XX("AE8_2430_USB0HS_CLK",	0x13A,	0,	0,	0,	1)
+MUX_CFG_24XX("AD8_2430_USB0HS_DIR",	0x13B,	0,	0,	0,	1)
+MUX_CFG_24XX("AE5_2430_USB0HS_STP",	0x13c,	0,	1,	1,	1)
+MUX_CFG_24XX("AE9_2430_USB0HS_NXT",	0x13D,	0,	0,	0,	1)
+MUX_CFG_24XX("AC7_2430_USB0HS_DATA7",	0x13E,	0,	0,	0,	1)
+
+/* 2430 McBSP */
+MUX_CFG_24XX("AC10_2430_MCBSP2_FSX",	0x012E,	1,	0,	0,	1)
+MUX_CFG_24XX("AD16_2430_MCBSP2_CLX",	0x012F,	1,	0,	0,	1)
+MUX_CFG_24XX("AE13_2430_MCBSP2_DX",	0x0130,	1,	0,	0,	1)
+MUX_CFG_24XX("AD13_2430_MCBSP2_DR",	0x0131,	1,	0,	0,	1)
+MUX_CFG_24XX("AC10_2430_MCBSP2_FSX_OFF",0x012E,	0,	0,	0,	1)
+MUX_CFG_24XX("AD16_2430_MCBSP2_CLX_OFF",0x012F,	0,	0,	0,	1)
+MUX_CFG_24XX("AE13_2430_MCBSP2_DX_OFF",	0x0130,	0,	0,	0,	1)
+MUX_CFG_24XX("AD13_2430_MCBSP2_DR_OFF",	0x0131,	0,	0,	0,	1)
 };
 
-int __init omap2_mux_init(void)
+#define OMAP24XX_PINS_SZ	ARRAY_SIZE(omap24xx_pins)
+
+#else
+#define omap24xx_pins		NULL
+#define OMAP24XX_PINS_SZ	0
+#endif	/* CONFIG_ARCH_OMAP24XX */
+
+#define OMAP24XX_PULL_ENA	(1 << 3)
+#define OMAP24XX_PULL_UP	(1 << 4)
+
+#if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
+void __init_or_module omap2_cfg_debug(const struct pin_config *cfg, u8 reg)
 {
-	omap_mux_register(omap24xx_pins, ARRAY_SIZE(omap24xx_pins));
+	u16 orig;
+	u8 warn = 0, debug = 0;
+
+	orig = omap_ctrl_readb(cfg->mux_reg);
+
+#ifdef	CONFIG_OMAP_MUX_DEBUG
+	debug = cfg->debug;
+#endif
+	warn = (orig != reg);
+	if (debug || warn)
+		printk(KERN_WARNING
+			"MUX: setup %s (0x%08x): 0x%02x -> 0x%02x\n",
+			cfg->name, omap_ctrl_base_get() + cfg->mux_reg,
+			orig, reg);
+}
+#else
+#define omap2_cfg_debug(x, y)	do {} while (0)
+#endif
+
+#ifdef CONFIG_ARCH_OMAP24XX
+int __init_or_module omap24xx_cfg_reg(const struct pin_config *cfg)
+{
+	static DEFINE_SPINLOCK(mux_spin_lock);
+	unsigned long flags;
+	u8 reg = 0;
+
+	spin_lock_irqsave(&mux_spin_lock, flags);
+	reg |= cfg->mask & 0x7;
+	if (cfg->pull_val)
+		reg |= OMAP24XX_PULL_ENA;
+	if (cfg->pu_pd_val)
+		reg |= OMAP24XX_PULL_UP;
+	omap2_cfg_debug(cfg, reg);
+	omap_ctrl_writeb(reg, cfg->mux_reg);
+	spin_unlock_irqrestore(&mux_spin_lock, flags);
+
 	return 0;
 }
+#else
+#define omap24xx_cfg_reg	0
+#endif
+
+int __init omap2_mux_init(void)
+{
+	if (cpu_is_omap24xx()) {
+		arch_mux_cfg.pins	= omap24xx_pins;
+		arch_mux_cfg.size	= OMAP24XX_PINS_SZ;
+		arch_mux_cfg.cfg_reg	= omap24xx_cfg_reg;
+	}
+
+	return omap_mux_register(&arch_mux_cfg);
+}
 
 #endif
diff --git a/arch/arm/mach-omap2/pm-domain.c b/arch/arm/mach-omap2/pm-domain.c
deleted file mode 100644
index 2494091..0000000
--- a/arch/arm/mach-omap2/pm-domain.c
+++ /dev/null
@@ -1,299 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/pm-domain.c
- *
- * Power domain functions for OMAP2
- *
- * Copyright (C) 2006 Nokia Corporation
- * Tony Lindgren <tony@atomide.com>
- *
- * Some code based on earlier OMAP2 sample PM code
- * Copyright (C) 2005 Texas Instruments, Inc.
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-
-#include <asm/io.h>
-
-#include "prcm-regs.h"
-
-/* Power domain offsets */
-#define PM_MPU_OFFSET			0x100
-#define PM_CORE_OFFSET			0x200
-#define PM_GFX_OFFSET			0x300
-#define PM_WKUP_OFFSET			0x400		/* Autoidle only */
-#define PM_PLL_OFFSET			0x500		/* Autoidle only */
-#define PM_DSP_OFFSET			0x800
-#define PM_MDM_OFFSET			0xc00
-
-/* Power domain wake-up dependency control register */
-#define PM_WKDEP_OFFSET			0xc8
-#define		EN_MDM			(1 << 5)
-#define		EN_WKUP			(1 << 4)
-#define		EN_GFX			(1 << 3)
-#define		EN_DSP			(1 << 2)
-#define		EN_MPU			(1 << 1)
-#define		EN_CORE			(1 << 0)
-
-/* Core power domain state transition control register */
-#define PM_PWSTCTRL_OFFSET		0xe0
-#define		FORCESTATE		(1 << 18)	/* Only for DSP & GFX */
-#define		MEM4RETSTATE		(1 << 6)
-#define		MEM3RETSTATE		(1 << 5)
-#define		MEM2RETSTATE		(1 << 4)
-#define		MEM1RETSTATE		(1 << 3)
-#define		LOGICRETSTATE		(1 << 2)	/* Logic is retained */
-#define		POWERSTATE_OFF		0x3
-#define		POWERSTATE_RETENTION	0x1
-#define		POWERSTATE_ON		0x0
-
-/* Power domain state register */
-#define PM_PWSTST_OFFSET		0xe4
-
-/* Hardware supervised state transition control register */
-#define CM_CLKSTCTRL_OFFSET		0x48
-#define		AUTOSTAT_MPU		(1 << 0)	/* MPU */
-#define		AUTOSTAT_DSS		(1 << 2)	/* Core */
-#define		AUTOSTAT_L4		(1 << 1)	/* Core */
-#define		AUTOSTAT_L3		(1 << 0)	/* Core */
-#define		AUTOSTAT_GFX		(1 << 0)	/* GFX */
-#define		AUTOSTAT_IVA		(1 << 8)	/* 2420 IVA in DSP domain */
-#define		AUTOSTAT_DSP		(1 << 0)	/* DSP */
-#define		AUTOSTAT_MDM		(1 << 0)	/* MDM */
-
-/* Automatic control of interface clock idling */
-#define CM_AUTOIDLE1_OFFSET		0x30
-#define CM_AUTOIDLE2_OFFSET		0x34		/* Core only */
-#define CM_AUTOIDLE3_OFFSET		0x38		/* Core only */
-#define CM_AUTOIDLE4_OFFSET		0x3c		/* Core only */
-#define		AUTO_54M(x)		(((x) & 0x3) << 6)
-#define		AUTO_96M(x)		(((x) & 0x3) << 2)
-#define		AUTO_DPLL(x)		(((x) & 0x3) << 0)
-#define		AUTO_STOPPED		0x3
-#define		AUTO_BYPASS_FAST	0x2		/* DPLL only */
-#define		AUTO_BYPASS_LOW_POWER	0x1		/* DPLL only */
-#define		AUTO_DISABLED		0x0
-
-/* Voltage control PRCM_VOLTCTRL bits */
-#define		AUTO_EXTVOLT		(1 << 15)
-#define		FORCE_EXTVOLT		(1 << 14)
-#define		SETOFF_LEVEL(x)		(((x) & 0x3) << 12)
-#define		MEMRETCTRL		(1 << 8)
-#define		SETRET_LEVEL(x)		(((x) & 0x3) << 6)
-#define		VOLT_LEVEL(x)		(((x) & 0x3) << 0)
-
-#define OMAP24XX_PRCM_VBASE	IO_ADDRESS(OMAP24XX_PRCM_BASE)
-#define prcm_readl(r)		__raw_readl(OMAP24XX_PRCM_VBASE + (r))
-#define prcm_writel(v, r)	__raw_writel((v), OMAP24XX_PRCM_VBASE + (r))
-
-static u32 pmdomain_get_wakeup_dependencies(int domain_offset)
-{
-	return prcm_readl(domain_offset + PM_WKDEP_OFFSET);
-}
-
-static void pmdomain_set_wakeup_dependencies(u32 state, int domain_offset)
-{
-	prcm_writel(state, domain_offset + PM_WKDEP_OFFSET);
-}
-
-static u32 pmdomain_get_powerstate(int domain_offset)
-{
-	return prcm_readl(domain_offset + PM_PWSTCTRL_OFFSET);
-}
-
-static void pmdomain_set_powerstate(u32 state, int domain_offset)
-{
-	prcm_writel(state, domain_offset + PM_PWSTCTRL_OFFSET);
-}
-
-static u32 pmdomain_get_clock_autocontrol(int domain_offset)
-{
-	return prcm_readl(domain_offset + CM_CLKSTCTRL_OFFSET);
-}
-
-static void pmdomain_set_clock_autocontrol(u32 state, int domain_offset)
-{
-	prcm_writel(state, domain_offset + CM_CLKSTCTRL_OFFSET);
-}
-
-static u32 pmdomain_get_clock_autoidle1(int domain_offset)
-{
-	return prcm_readl(domain_offset + CM_AUTOIDLE1_OFFSET);
-}
-
-/* Core domain only */
-static u32 pmdomain_get_clock_autoidle2(int domain_offset)
-{
-	return prcm_readl(domain_offset + CM_AUTOIDLE2_OFFSET);
-}
-
-/* Core domain only */
-static u32 pmdomain_get_clock_autoidle3(int domain_offset)
-{
-	return prcm_readl(domain_offset + CM_AUTOIDLE3_OFFSET);
-}
-
-/* Core domain only */
-static u32 pmdomain_get_clock_autoidle4(int domain_offset)
-{
-	return prcm_readl(domain_offset + CM_AUTOIDLE4_OFFSET);
-}
-
-static void pmdomain_set_clock_autoidle1(u32 state, int domain_offset)
-{
-	prcm_writel(state, CM_AUTOIDLE1_OFFSET + domain_offset);
-}
-
-/* Core domain only */
-static void pmdomain_set_clock_autoidle2(u32 state, int domain_offset)
-{
-	prcm_writel(state, CM_AUTOIDLE2_OFFSET + domain_offset);
-}
-
-/* Core domain only */
-static void pmdomain_set_clock_autoidle3(u32 state, int domain_offset)
-{
-	prcm_writel(state, CM_AUTOIDLE3_OFFSET + domain_offset);
-}
-
-/* Core domain only */
-static void pmdomain_set_clock_autoidle4(u32 state, int domain_offset)
-{
-	prcm_writel(state, CM_AUTOIDLE4_OFFSET + domain_offset);
-}
-
-/*
- * Configures power management domains to idle clocks automatically.
- */
-void pmdomain_set_autoidle(void)
-{
-	u32 val;
-
-	/* Set PLL auto stop for 54M, 96M & DPLL */
-	pmdomain_set_clock_autoidle1(AUTO_54M(AUTO_STOPPED) |
-				     AUTO_96M(AUTO_STOPPED) |
-				     AUTO_DPLL(AUTO_STOPPED), PM_PLL_OFFSET);
-
-	/* External clock input control
-	 * REVISIT: Should this be in clock framework?
-	 */
-	PRCM_CLKSRC_CTRL |= (0x3 << 3);
-
-	/* Configure number of 32KHz clock cycles for sys_clk */
-	PRCM_CLKSSETUP = 0x00ff;
-
-	/* Configure automatic voltage transition */
-	PRCM_VOLTSETUP = 0;
-	val = PRCM_VOLTCTRL;
-	val &= ~(SETOFF_LEVEL(0x3) | VOLT_LEVEL(0x3));
-	val |= SETOFF_LEVEL(1) | VOLT_LEVEL(1) | AUTO_EXTVOLT;
-	PRCM_VOLTCTRL = val;
-
-	/* Disable emulation tools functional clock */
-	PRCM_CLKEMUL_CTRL = 0x0;
-
-	/* Set core memory retention state */
-	val = pmdomain_get_powerstate(PM_CORE_OFFSET);
-	if (cpu_is_omap2420()) {
-		val &= ~(0x7 << 3);
-		val |= (MEM3RETSTATE | MEM2RETSTATE | MEM1RETSTATE);
-	} else {
-		val &= ~(0xf << 3);
-		val |= (MEM4RETSTATE | MEM3RETSTATE | MEM2RETSTATE |
-			MEM1RETSTATE);
-	}
-	pmdomain_set_powerstate(val, PM_CORE_OFFSET);
-
-	/* OCP interface smart idle. REVISIT: Enable autoidle bit0 ? */
-	val = SMS_SYSCONFIG;
-	val &= ~(0x3 << 3);
-	val |= (0x2 << 3) | (1 << 0);
-	SMS_SYSCONFIG |= val;
-
-	val = SDRC_SYSCONFIG;
-	val &= ~(0x3 << 3);
-	val |= (0x2 << 3);
-	SDRC_SYSCONFIG = val;
-
-	/* Configure L3 interface for smart idle.
-	 * REVISIT: Enable autoidle bit0 ?
-	 */
-	val = GPMC_SYSCONFIG;
-	val &= ~(0x3 << 3);
-	val |= (0x2 << 3) | (1 << 0);
-	GPMC_SYSCONFIG = val;
-
-	pmdomain_set_powerstate(LOGICRETSTATE | POWERSTATE_RETENTION,
-				PM_MPU_OFFSET);
-	pmdomain_set_powerstate(POWERSTATE_RETENTION, PM_CORE_OFFSET);
-	if (!cpu_is_omap2420())
-		pmdomain_set_powerstate(POWERSTATE_RETENTION, PM_MDM_OFFSET);
-
-	/* Assume suspend function has saved the state for DSP and GFX */
-	pmdomain_set_powerstate(FORCESTATE | POWERSTATE_OFF, PM_DSP_OFFSET);
-	pmdomain_set_powerstate(FORCESTATE | POWERSTATE_OFF, PM_GFX_OFFSET);
-
-#if 0
-	/* REVISIT: Internal USB needs special handling */
-	force_standby_usb();
-	if (cpu_is_omap2430())
-		force_hsmmc();
-	sdram_self_refresh_on_idle_req(1);
-#endif
-
-	/* Enable clock auto control for all domains.
-	 * Note that CORE domain includes also DSS, L4 & L3.
-	 */
-	pmdomain_set_clock_autocontrol(AUTOSTAT_MPU, PM_MPU_OFFSET);
-	pmdomain_set_clock_autocontrol(AUTOSTAT_GFX, PM_GFX_OFFSET);
-	pmdomain_set_clock_autocontrol(AUTOSTAT_DSS | AUTOSTAT_L4 | AUTOSTAT_L3,
-				       PM_CORE_OFFSET);
-	if (cpu_is_omap2420())
-		pmdomain_set_clock_autocontrol(AUTOSTAT_IVA | AUTOSTAT_DSP,
-					       PM_DSP_OFFSET);
-	else {
-		pmdomain_set_clock_autocontrol(AUTOSTAT_DSP, PM_DSP_OFFSET);
-		pmdomain_set_clock_autocontrol(AUTOSTAT_MDM, PM_MDM_OFFSET);
-	}
-
-	/* Enable clock autoidle for all domains */
-	pmdomain_set_clock_autoidle1(0x2, PM_DSP_OFFSET);
-	if (cpu_is_omap2420()) {
-		pmdomain_set_clock_autoidle1(0xfffffff9, PM_CORE_OFFSET);
-		pmdomain_set_clock_autoidle2(0x7, PM_CORE_OFFSET);
-		pmdomain_set_clock_autoidle1(0x3f, PM_WKUP_OFFSET);
-	} else {
-		pmdomain_set_clock_autoidle1(0xeafffff1, PM_CORE_OFFSET);
-		pmdomain_set_clock_autoidle2(0xfff, PM_CORE_OFFSET);
-		pmdomain_set_clock_autoidle1(0x7f, PM_WKUP_OFFSET);
-		pmdomain_set_clock_autoidle1(0x3, PM_MDM_OFFSET);
-	}
-	pmdomain_set_clock_autoidle3(0x7, PM_CORE_OFFSET);
-	pmdomain_set_clock_autoidle4(0x1f, PM_CORE_OFFSET);
-}
-
-/*
- * Initializes power domains by removing wake-up dependencies and powering
- * down DSP and GFX. Gets called from PM init. Note that DSP and IVA code
- * must re-enable DSP and GFX when used.
- */
-void __init pmdomain_init(void)
-{
-	/* Remove all domain wakeup dependencies */
-	pmdomain_set_wakeup_dependencies(EN_WKUP | EN_CORE, PM_MPU_OFFSET);
-	pmdomain_set_wakeup_dependencies(0, PM_DSP_OFFSET);
-	pmdomain_set_wakeup_dependencies(0, PM_GFX_OFFSET);
-	pmdomain_set_wakeup_dependencies(EN_WKUP | EN_MPU, PM_CORE_OFFSET);
-	if (cpu_is_omap2430())
-		pmdomain_set_wakeup_dependencies(0, PM_MDM_OFFSET);
-
-	/* Power down DSP and GFX */
-	pmdomain_set_powerstate(POWERSTATE_OFF | FORCESTATE, PM_DSP_OFFSET);
-	pmdomain_set_powerstate(POWERSTATE_OFF | FORCESTATE, PM_GFX_OFFSET);
-}
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index baf7d82..aad781d 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -23,6 +23,7 @@
 #include <linux/sysfs.h>
 #include <linux/module.h>
 #include <linux/delay.h>
+#include <linux/clk.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -36,8 +37,6 @@
 #include <asm/arch/sram.h>
 #include <asm/arch/pm.h>
 
-#include "prcm-regs.h"
-
 static struct clk *vclk;
 static void (*omap2_sram_idle)(void);
 static void (*omap2_sram_suspend)(int dllctrl, int cpu_rev);
@@ -78,251 +77,8 @@ static int omap2_pm_prepare(void)
 	return 0;
 }
 
-#define INT0_WAKE_MASK	(OMAP_IRQ_BIT(INT_24XX_GPIO_BANK1) |	\
-			OMAP_IRQ_BIT(INT_24XX_GPIO_BANK2) |	\
-			OMAP_IRQ_BIT(INT_24XX_GPIO_BANK3))
-
-#define INT1_WAKE_MASK	(OMAP_IRQ_BIT(INT_24XX_GPIO_BANK4))
-
-#define INT2_WAKE_MASK	(OMAP_IRQ_BIT(INT_24XX_UART1_IRQ) |	\
-			OMAP_IRQ_BIT(INT_24XX_UART2_IRQ) |	\
-			OMAP_IRQ_BIT(INT_24XX_UART3_IRQ))
-
-#define preg(reg)	printk("%s\t(0x%p):\t0x%08x\n", #reg, &reg, reg);
-
-static void omap2_pm_debug(char * desc)
-{
-	printk("%s:\n", desc);
-
-	preg(CM_CLKSTCTRL_MPU);
-	preg(CM_CLKSTCTRL_CORE);
-	preg(CM_CLKSTCTRL_GFX);
-	preg(CM_CLKSTCTRL_DSP);
-	preg(CM_CLKSTCTRL_MDM);
-
-	preg(PM_PWSTCTRL_MPU);
-	preg(PM_PWSTCTRL_CORE);
-	preg(PM_PWSTCTRL_GFX);
-	preg(PM_PWSTCTRL_DSP);
-	preg(PM_PWSTCTRL_MDM);
-
-	preg(PM_PWSTST_MPU);
-	preg(PM_PWSTST_CORE);
-	preg(PM_PWSTST_GFX);
-	preg(PM_PWSTST_DSP);
-	preg(PM_PWSTST_MDM);
-
-	preg(CM_AUTOIDLE1_CORE);
-	preg(CM_AUTOIDLE2_CORE);
-	preg(CM_AUTOIDLE3_CORE);
-	preg(CM_AUTOIDLE4_CORE);
-	preg(CM_AUTOIDLE_WKUP);
-	preg(CM_AUTOIDLE_PLL);
-	preg(CM_AUTOIDLE_DSP);
-	preg(CM_AUTOIDLE_MDM);
-
-	preg(CM_ICLKEN1_CORE);
-	preg(CM_ICLKEN2_CORE);
-	preg(CM_ICLKEN3_CORE);
-	preg(CM_ICLKEN4_CORE);
-	preg(CM_ICLKEN_GFX);
-	preg(CM_ICLKEN_WKUP);
-	preg(CM_ICLKEN_DSP);
-	preg(CM_ICLKEN_MDM);
-
-	preg(CM_IDLEST1_CORE);
-	preg(CM_IDLEST2_CORE);
-	preg(CM_IDLEST3_CORE);
-	preg(CM_IDLEST4_CORE);
-	preg(CM_IDLEST_GFX);
-	preg(CM_IDLEST_WKUP);
-	preg(CM_IDLEST_CKGEN);
-	preg(CM_IDLEST_DSP);
-	preg(CM_IDLEST_MDM);
-
-	preg(RM_RSTST_MPU);
-	preg(RM_RSTST_GFX);
-	preg(RM_RSTST_WKUP);
-	preg(RM_RSTST_DSP);
-	preg(RM_RSTST_MDM);
-
-	preg(PM_WKDEP_MPU);
-	preg(PM_WKDEP_CORE);
-	preg(PM_WKDEP_GFX);
-	preg(PM_WKDEP_DSP);
-	preg(PM_WKDEP_MDM);
-
-	preg(CM_FCLKEN_WKUP);
-	preg(CM_ICLKEN_WKUP);
-	preg(CM_IDLEST_WKUP);
-	preg(CM_AUTOIDLE_WKUP);
-	preg(CM_CLKSEL_WKUP);
-
-	preg(PM_WKEN_WKUP);
-	preg(PM_WKST_WKUP);
-}
-
-static inline void omap2_pm_save_registers(void)
-{
-	/* Save interrupt registers */
-	OMAP24XX_SAVE(INTC_MIR0);
-	OMAP24XX_SAVE(INTC_MIR1);
-	OMAP24XX_SAVE(INTC_MIR2);
-
-	/* Save power control registers */
-	OMAP24XX_SAVE(CM_CLKSTCTRL_MPU);
-	OMAP24XX_SAVE(CM_CLKSTCTRL_CORE);
-	OMAP24XX_SAVE(CM_CLKSTCTRL_GFX);
-	OMAP24XX_SAVE(CM_CLKSTCTRL_DSP);
-	OMAP24XX_SAVE(CM_CLKSTCTRL_MDM);
-
-	/* Save power state registers */
-	OMAP24XX_SAVE(PM_PWSTCTRL_MPU);
-	OMAP24XX_SAVE(PM_PWSTCTRL_CORE);
-	OMAP24XX_SAVE(PM_PWSTCTRL_GFX);
-	OMAP24XX_SAVE(PM_PWSTCTRL_DSP);
-	OMAP24XX_SAVE(PM_PWSTCTRL_MDM);
-
-	/* Save autoidle registers */
-	OMAP24XX_SAVE(CM_AUTOIDLE1_CORE);
-	OMAP24XX_SAVE(CM_AUTOIDLE2_CORE);
-	OMAP24XX_SAVE(CM_AUTOIDLE3_CORE);
-	OMAP24XX_SAVE(CM_AUTOIDLE4_CORE);
-	OMAP24XX_SAVE(CM_AUTOIDLE_WKUP);
-	OMAP24XX_SAVE(CM_AUTOIDLE_PLL);
-	OMAP24XX_SAVE(CM_AUTOIDLE_DSP);
-	OMAP24XX_SAVE(CM_AUTOIDLE_MDM);
-
-	/* Save idle state registers */
-	OMAP24XX_SAVE(CM_IDLEST1_CORE);
-	OMAP24XX_SAVE(CM_IDLEST2_CORE);
-	OMAP24XX_SAVE(CM_IDLEST3_CORE);
-	OMAP24XX_SAVE(CM_IDLEST4_CORE);
-	OMAP24XX_SAVE(CM_IDLEST_GFX);
-	OMAP24XX_SAVE(CM_IDLEST_WKUP);
-	OMAP24XX_SAVE(CM_IDLEST_CKGEN);
-	OMAP24XX_SAVE(CM_IDLEST_DSP);
-	OMAP24XX_SAVE(CM_IDLEST_MDM);
-
-	/* Save clock registers */
-	OMAP24XX_SAVE(CM_FCLKEN1_CORE);
-	OMAP24XX_SAVE(CM_FCLKEN2_CORE);
-	OMAP24XX_SAVE(CM_ICLKEN1_CORE);
-	OMAP24XX_SAVE(CM_ICLKEN2_CORE);
-	OMAP24XX_SAVE(CM_ICLKEN3_CORE);
-	OMAP24XX_SAVE(CM_ICLKEN4_CORE);
-}
-
-static inline void omap2_pm_restore_registers(void)
-{
-	/* Restore clock state registers */
-	OMAP24XX_RESTORE(CM_CLKSTCTRL_MPU);
-	OMAP24XX_RESTORE(CM_CLKSTCTRL_CORE);
-	OMAP24XX_RESTORE(CM_CLKSTCTRL_GFX);
-	OMAP24XX_RESTORE(CM_CLKSTCTRL_DSP);
-	OMAP24XX_RESTORE(CM_CLKSTCTRL_MDM);
-
-	/* Restore power state registers */
-	OMAP24XX_RESTORE(PM_PWSTCTRL_MPU);
-	OMAP24XX_RESTORE(PM_PWSTCTRL_CORE);
-	OMAP24XX_RESTORE(PM_PWSTCTRL_GFX);
-	OMAP24XX_RESTORE(PM_PWSTCTRL_DSP);
-	OMAP24XX_RESTORE(PM_PWSTCTRL_MDM);
-
-	/* Restore idle state registers */
-	OMAP24XX_RESTORE(CM_IDLEST1_CORE);
-	OMAP24XX_RESTORE(CM_IDLEST2_CORE);
-	OMAP24XX_RESTORE(CM_IDLEST3_CORE);
-	OMAP24XX_RESTORE(CM_IDLEST4_CORE);
-	OMAP24XX_RESTORE(CM_IDLEST_GFX);
-	OMAP24XX_RESTORE(CM_IDLEST_WKUP);
-	OMAP24XX_RESTORE(CM_IDLEST_CKGEN);
-	OMAP24XX_RESTORE(CM_IDLEST_DSP);
-	OMAP24XX_RESTORE(CM_IDLEST_MDM);
-
-	/* Restore autoidle registers */
-	OMAP24XX_RESTORE(CM_AUTOIDLE1_CORE);
-	OMAP24XX_RESTORE(CM_AUTOIDLE2_CORE);
-	OMAP24XX_RESTORE(CM_AUTOIDLE3_CORE);
-	OMAP24XX_RESTORE(CM_AUTOIDLE4_CORE);
-	OMAP24XX_RESTORE(CM_AUTOIDLE_WKUP);
-	OMAP24XX_RESTORE(CM_AUTOIDLE_PLL);
-	OMAP24XX_RESTORE(CM_AUTOIDLE_DSP);
-	OMAP24XX_RESTORE(CM_AUTOIDLE_MDM);
-
-	/* Restore clock registers */
-	OMAP24XX_RESTORE(CM_FCLKEN1_CORE);
-	OMAP24XX_RESTORE(CM_FCLKEN2_CORE);
-	OMAP24XX_RESTORE(CM_ICLKEN1_CORE);
-	OMAP24XX_RESTORE(CM_ICLKEN2_CORE);
-	OMAP24XX_RESTORE(CM_ICLKEN3_CORE);
-	OMAP24XX_RESTORE(CM_ICLKEN4_CORE);
-
-	/* REVISIT: Clear interrupts here */
-
-	/* Restore interrupt registers */
-	OMAP24XX_RESTORE(INTC_MIR0);
-	OMAP24XX_RESTORE(INTC_MIR1);
-	OMAP24XX_RESTORE(INTC_MIR2);
-}
-
 static int omap2_pm_suspend(void)
 {
-	int processor_type = 0;
-
-	/* REVISIT: 0x21 or 0x26? */
-	if (cpu_is_omap2420())
-		processor_type = 0x21;
-
-	if (!processor_type)
-		return -ENOTSUPP;
-
-	local_irq_disable();
-	local_fiq_disable();
-
-	omap2_pm_save_registers();
-
-	/* Disable interrupts except for the wake events */
-	INTC_MIR_SET0 = 0xffffffff & ~INT0_WAKE_MASK;
-	INTC_MIR_SET1 = 0xffffffff & ~INT1_WAKE_MASK;
-	INTC_MIR_SET2 = 0xffffffff & ~INT2_WAKE_MASK;
-
-	pmdomain_set_autoidle();
-
-	/* Clear old wake-up events */
-	PM_WKST1_CORE = 0;
-	PM_WKST2_CORE = 0;
-	PM_WKST_WKUP = 0;
-
-	/* Enable wake-up events */
-	PM_WKEN1_CORE = (1 << 22) | (1 << 21);	/* UART1 & 2 */
-	PM_WKEN2_CORE = (1 << 2);		/* UART3 */
-	PM_WKEN_WKUP = (1 << 2) | (1 << 0);	/* GPIO & GPT1 */
-
-	/* Disable clocks except for CM_ICLKEN2_CORE. It gets disabled
-	 * in the SRAM suspend code */
-	CM_FCLKEN1_CORE = 0;
-	CM_FCLKEN2_CORE = 0;
-	CM_ICLKEN1_CORE = 0;
-	CM_ICLKEN3_CORE = 0;
-	CM_ICLKEN4_CORE = 0;
-
-	omap2_pm_debug("Status before suspend");
-
-	/* Must wait for serial buffers to clear */
-	mdelay(200);
-
-	/* Jump to SRAM suspend code
-	 * REVISIT: When is this SDRC_DLLB_CTRL?
-	 */
-	omap2_sram_suspend(SDRC_DLLA_CTRL, processor_type);
-
-	/* Back from sleep */
-	omap2_pm_restore_registers();
-
-	local_fiq_enable();
-	local_irq_enable();
-
 	return 0;
 }
 
@@ -357,30 +113,6 @@ static struct platform_suspend_ops omap_pm_ops = {
 
 int __init omap2_pm_init(void)
 {
-	printk("Power Management for TI OMAP.\n");
-
-	vclk = clk_get(NULL, "virt_prcm_set");
-	if (IS_ERR(vclk)) {
-		printk(KERN_ERR "Could not get PM vclk\n");
-		return -ENODEV;
-	}
-
-	/*
-	 * We copy the assembler sleep/wakeup routines to SRAM.
-	 * These routines need to be in SRAM as that's the only
-	 * memory the MPU can see when it wakes up.
-	 */
-	omap2_sram_idle = omap_sram_push(omap24xx_idle_loop_suspend,
-					 omap24xx_idle_loop_suspend_sz);
-
-	omap2_sram_suspend = omap_sram_push(omap24xx_cpu_suspend,
-					    omap24xx_cpu_suspend_sz);
-
-	suspend_set_ops(&omap_pm_ops);
-	pm_idle = omap2_pm_idle;
-
-	pmdomain_init();
-
 	return 0;
 }
 
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
new file mode 100644
index 0000000..cacb340
--- /dev/null
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -0,0 +1,317 @@
+#ifndef __ARCH_ASM_MACH_OMAP2_PRCM_COMMON_H
+#define __ARCH_ASM_MACH_OMAP2_PRCM_COMMON_H
+
+/*
+ * OMAP2/3 PRCM base and module definitions
+ *
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+
+/* Module offsets from both CM_BASE & PRM_BASE */
+
+/*
+ * Offsets that are the same on 24xx and 34xx
+ *
+ * Technically, in terms of the TRM, OCP_MOD is 34xx only; PLL_MOD is
+ * CCR_MOD on 3430; and GFX_MOD only exists < 3430ES2.
+ */
+#define OCP_MOD						0x000
+#define MPU_MOD						0x100
+#define CORE_MOD					0x200
+#define GFX_MOD						0x300
+#define WKUP_MOD					0x400
+#define PLL_MOD						0x500
+
+
+/* Chip-specific module offsets */
+#define OMAP24XX_DSP_MOD				0x800
+
+#define OMAP2430_MDM_MOD				0xc00
+
+/* IVA2 module is < base on 3430 */
+#define OMAP3430_IVA2_MOD				-0x800
+#define OMAP3430ES2_SGX_MOD				GFX_MOD
+#define OMAP3430_CCR_MOD				PLL_MOD
+#define OMAP3430_DSS_MOD				0x600
+#define OMAP3430_CAM_MOD				0x700
+#define OMAP3430_PER_MOD				0x800
+#define OMAP3430_EMU_MOD				0x900
+#define OMAP3430_GR_MOD					0xa00
+#define OMAP3430_NEON_MOD				0xb00
+#define OMAP3430ES2_USBHOST_MOD				0xc00
+
+
+/* 24XX register bits shared between CM & PRM registers */
+
+/* CM_FCLKEN1_CORE, CM_ICLKEN1_CORE, PM_WKEN1_CORE shared bits */
+#define OMAP2420_EN_MMC_SHIFT				26
+#define OMAP2420_EN_MMC					(1 << 26)
+#define OMAP24XX_EN_UART2_SHIFT				22
+#define OMAP24XX_EN_UART2				(1 << 22)
+#define OMAP24XX_EN_UART1_SHIFT				21
+#define OMAP24XX_EN_UART1				(1 << 21)
+#define OMAP24XX_EN_MCSPI2_SHIFT			18
+#define OMAP24XX_EN_MCSPI2				(1 << 18)
+#define OMAP24XX_EN_MCSPI1_SHIFT			17
+#define OMAP24XX_EN_MCSPI1				(1 << 17)
+#define OMAP24XX_EN_MCBSP2_SHIFT			16
+#define OMAP24XX_EN_MCBSP2				(1 << 16)
+#define OMAP24XX_EN_MCBSP1_SHIFT			15
+#define OMAP24XX_EN_MCBSP1				(1 << 15)
+#define OMAP24XX_EN_GPT12_SHIFT				14
+#define OMAP24XX_EN_GPT12				(1 << 14)
+#define OMAP24XX_EN_GPT11_SHIFT				13
+#define OMAP24XX_EN_GPT11				(1 << 13)
+#define OMAP24XX_EN_GPT10_SHIFT				12
+#define OMAP24XX_EN_GPT10				(1 << 12)
+#define OMAP24XX_EN_GPT9_SHIFT				11
+#define OMAP24XX_EN_GPT9				(1 << 11)
+#define OMAP24XX_EN_GPT8_SHIFT				10
+#define OMAP24XX_EN_GPT8				(1 << 10)
+#define OMAP24XX_EN_GPT7_SHIFT				9
+#define OMAP24XX_EN_GPT7				(1 << 9)
+#define OMAP24XX_EN_GPT6_SHIFT				8
+#define OMAP24XX_EN_GPT6				(1 << 8)
+#define OMAP24XX_EN_GPT5_SHIFT				7
+#define OMAP24XX_EN_GPT5				(1 << 7)
+#define OMAP24XX_EN_GPT4_SHIFT				6
+#define OMAP24XX_EN_GPT4				(1 << 6)
+#define OMAP24XX_EN_GPT3_SHIFT				5
+#define OMAP24XX_EN_GPT3				(1 << 5)
+#define OMAP24XX_EN_GPT2_SHIFT				4
+#define OMAP24XX_EN_GPT2				(1 << 4)
+#define OMAP2420_EN_VLYNQ_SHIFT				3
+#define OMAP2420_EN_VLYNQ				(1 << 3)
+
+/* CM_FCLKEN2_CORE, CM_ICLKEN2_CORE, PM_WKEN2_CORE shared bits */
+#define OMAP2430_EN_GPIO5_SHIFT				10
+#define OMAP2430_EN_GPIO5				(1 << 10)
+#define OMAP2430_EN_MCSPI3_SHIFT			9
+#define OMAP2430_EN_MCSPI3				(1 << 9)
+#define OMAP2430_EN_MMCHS2_SHIFT			8
+#define OMAP2430_EN_MMCHS2				(1 << 8)
+#define OMAP2430_EN_MMCHS1_SHIFT			7
+#define OMAP2430_EN_MMCHS1				(1 << 7)
+#define OMAP24XX_EN_UART3_SHIFT				2
+#define OMAP24XX_EN_UART3				(1 << 2)
+#define OMAP24XX_EN_USB_SHIFT				0
+#define OMAP24XX_EN_USB					(1 << 0)
+
+/* CM_ICLKEN2_CORE, PM_WKEN2_CORE shared bits */
+#define OMAP2430_EN_MDM_INTC_SHIFT			11
+#define OMAP2430_EN_MDM_INTC				(1 << 11)
+#define OMAP2430_EN_USBHS_SHIFT				6
+#define OMAP2430_EN_USBHS				(1 << 6)
+
+/* CM_IDLEST1_CORE, PM_WKST1_CORE shared bits */
+#define OMAP2420_ST_MMC					(1 << 26)
+#define OMAP24XX_ST_UART2				(1 << 22)
+#define OMAP24XX_ST_UART1				(1 << 21)
+#define OMAP24XX_ST_MCSPI2				(1 << 18)
+#define OMAP24XX_ST_MCSPI1				(1 << 17)
+#define OMAP24XX_ST_GPT12				(1 << 14)
+#define OMAP24XX_ST_GPT11				(1 << 13)
+#define OMAP24XX_ST_GPT10				(1 << 12)
+#define OMAP24XX_ST_GPT9				(1 << 11)
+#define OMAP24XX_ST_GPT8				(1 << 10)
+#define OMAP24XX_ST_GPT7				(1 << 9)
+#define OMAP24XX_ST_GPT6				(1 << 8)
+#define OMAP24XX_ST_GPT5				(1 << 7)
+#define OMAP24XX_ST_GPT4				(1 << 6)
+#define OMAP24XX_ST_GPT3				(1 << 5)
+#define OMAP24XX_ST_GPT2				(1 << 4)
+#define OMAP2420_ST_VLYNQ				(1 << 3)
+
+/* CM_IDLEST2_CORE, PM_WKST2_CORE shared bits */
+#define OMAP2430_ST_MDM_INTC				(1 << 11)
+#define OMAP2430_ST_GPIO5				(1 << 10)
+#define OMAP2430_ST_MCSPI3				(1 << 9)
+#define OMAP2430_ST_MMCHS2				(1 << 8)
+#define OMAP2430_ST_MMCHS1				(1 << 7)
+#define OMAP2430_ST_USBHS				(1 << 6)
+#define OMAP24XX_ST_UART3				(1 << 2)
+#define OMAP24XX_ST_USB					(1 << 0)
+
+/* CM_FCLKEN_WKUP, CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */
+#define OMAP24XX_EN_GPIOS_SHIFT				2
+#define OMAP24XX_EN_GPIOS				(1 << 2)
+#define OMAP24XX_EN_GPT1_SHIFT				0
+#define OMAP24XX_EN_GPT1				(1 << 0)
+
+/* PM_WKST_WKUP, CM_IDLEST_WKUP shared bits */
+#define OMAP24XX_ST_GPIOS				(1 << 2)
+#define OMAP24XX_ST_GPT1				(1 << 0)
+
+/* CM_IDLEST_MDM and PM_WKST_MDM shared bits */
+#define OMAP2430_ST_MDM					(1 << 0)
+
+
+/* 3430 register bits shared between CM & PRM registers */
+
+/* CM_REVISION, PRM_REVISION shared bits */
+#define OMAP3430_REV_SHIFT				0
+#define OMAP3430_REV_MASK				(0xff << 0)
+
+/* CM_SYSCONFIG, PRM_SYSCONFIG shared bits */
+#define OMAP3430_AUTOIDLE				(1 << 0)
+
+/* CM_FCLKEN1_CORE, CM_ICLKEN1_CORE, PM_WKEN1_CORE shared bits */
+#define OMAP3430_EN_MMC2				(1 << 25)
+#define OMAP3430_EN_MMC2_SHIFT				25
+#define OMAP3430_EN_MMC1				(1 << 24)
+#define OMAP3430_EN_MMC1_SHIFT				24
+#define OMAP3430_EN_MCSPI4				(1 << 21)
+#define OMAP3430_EN_MCSPI4_SHIFT			21
+#define OMAP3430_EN_MCSPI3				(1 << 20)
+#define OMAP3430_EN_MCSPI3_SHIFT			20
+#define OMAP3430_EN_MCSPI2				(1 << 19)
+#define OMAP3430_EN_MCSPI2_SHIFT			19
+#define OMAP3430_EN_MCSPI1				(1 << 18)
+#define OMAP3430_EN_MCSPI1_SHIFT			18
+#define OMAP3430_EN_I2C3				(1 << 17)
+#define OMAP3430_EN_I2C3_SHIFT				17
+#define OMAP3430_EN_I2C2				(1 << 16)
+#define OMAP3430_EN_I2C2_SHIFT				16
+#define OMAP3430_EN_I2C1				(1 << 15)
+#define OMAP3430_EN_I2C1_SHIFT				15
+#define OMAP3430_EN_UART2				(1 << 14)
+#define OMAP3430_EN_UART2_SHIFT				14
+#define OMAP3430_EN_UART1				(1 << 13)
+#define OMAP3430_EN_UART1_SHIFT				13
+#define OMAP3430_EN_GPT11				(1 << 12)
+#define OMAP3430_EN_GPT11_SHIFT				12
+#define OMAP3430_EN_GPT10				(1 << 11)
+#define OMAP3430_EN_GPT10_SHIFT				11
+#define OMAP3430_EN_MCBSP5				(1 << 10)
+#define OMAP3430_EN_MCBSP5_SHIFT			10
+#define OMAP3430_EN_MCBSP1				(1 << 9)
+#define OMAP3430_EN_MCBSP1_SHIFT			9
+#define OMAP3430_EN_FSHOSTUSB				(1 << 5)
+#define OMAP3430_EN_FSHOSTUSB_SHIFT			5
+#define OMAP3430_EN_D2D					(1 << 3)
+#define OMAP3430_EN_D2D_SHIFT				3
+
+/* CM_ICLKEN1_CORE, PM_WKEN1_CORE shared bits */
+#define OMAP3430_EN_HSOTGUSB				(1 << 4)
+#define OMAP3430_EN_HSOTGUSB_SHIFT				4
+
+/* PM_WKST1_CORE, CM_IDLEST1_CORE shared bits */
+#define OMAP3430_ST_MMC2				(1 << 25)
+#define OMAP3430_ST_MMC1				(1 << 24)
+#define OMAP3430_ST_MCSPI4				(1 << 21)
+#define OMAP3430_ST_MCSPI3				(1 << 20)
+#define OMAP3430_ST_MCSPI2				(1 << 19)
+#define OMAP3430_ST_MCSPI1				(1 << 18)
+#define OMAP3430_ST_I2C3				(1 << 17)
+#define OMAP3430_ST_I2C2				(1 << 16)
+#define OMAP3430_ST_I2C1				(1 << 15)
+#define OMAP3430_ST_UART2				(1 << 14)
+#define OMAP3430_ST_UART1				(1 << 13)
+#define OMAP3430_ST_GPT11				(1 << 12)
+#define OMAP3430_ST_GPT10				(1 << 11)
+#define OMAP3430_ST_MCBSP5				(1 << 10)
+#define OMAP3430_ST_MCBSP1				(1 << 9)
+#define OMAP3430_ST_FSHOSTUSB				(1 << 5)
+#define OMAP3430_ST_HSOTGUSB				(1 << 4)
+#define OMAP3430_ST_D2D					(1 << 3)
+
+/* CM_FCLKEN_WKUP, CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */
+#define OMAP3430_EN_GPIO1				(1 << 3)
+#define OMAP3430_EN_GPIO1_SHIFT				3
+#define OMAP3430_EN_GPT1				(1 << 0)
+#define OMAP3430_EN_GPT1_SHIFT				0
+
+/* CM_FCLKEN_WKUP, PM_WKEN_WKUP shared bits */
+#define OMAP3430_EN_SR2					(1 << 7)
+#define OMAP3430_EN_SR2_SHIFT				7
+#define OMAP3430_EN_SR1					(1 << 6)
+#define OMAP3430_EN_SR1_SHIFT				6
+
+/* CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */
+#define OMAP3430_EN_GPT12				(1 << 1)
+#define OMAP3430_EN_GPT12_SHIFT				1
+
+/* CM_IDLEST_WKUP, PM_WKST_WKUP shared bits */
+#define OMAP3430_ST_SR2					(1 << 7)
+#define OMAP3430_ST_SR1					(1 << 6)
+#define OMAP3430_ST_GPIO1				(1 << 3)
+#define OMAP3430_ST_GPT12				(1 << 1)
+#define OMAP3430_ST_GPT1				(1 << 0)
+
+/*
+ * CM_SLEEPDEP_GFX, CM_SLEEPDEP_DSS, CM_SLEEPDEP_CAM,
+ * CM_SLEEPDEP_PER, PM_WKDEP_IVA2, PM_WKDEP_GFX,
+ * PM_WKDEP_DSS, PM_WKDEP_CAM, PM_WKDEP_PER, PM_WKDEP_NEON shared bits
+ */
+#define OMAP3430_EN_MPU					(1 << 1)
+#define OMAP3430_EN_MPU_SHIFT				1
+
+/* CM_FCLKEN_PER, CM_ICLKEN_PER, PM_WKEN_PER shared bits */
+#define OMAP3430_EN_GPIO6				(1 << 17)
+#define OMAP3430_EN_GPIO6_SHIFT				17
+#define OMAP3430_EN_GPIO5				(1 << 16)
+#define OMAP3430_EN_GPIO5_SHIFT				16
+#define OMAP3430_EN_GPIO4				(1 << 15)
+#define OMAP3430_EN_GPIO4_SHIFT				15
+#define OMAP3430_EN_GPIO3				(1 << 14)
+#define OMAP3430_EN_GPIO3_SHIFT				14
+#define OMAP3430_EN_GPIO2				(1 << 13)
+#define OMAP3430_EN_GPIO2_SHIFT				13
+#define OMAP3430_EN_UART3				(1 << 11)
+#define OMAP3430_EN_UART3_SHIFT				11
+#define OMAP3430_EN_GPT9				(1 << 10)
+#define OMAP3430_EN_GPT9_SHIFT				10
+#define OMAP3430_EN_GPT8				(1 << 9)
+#define OMAP3430_EN_GPT8_SHIFT				9
+#define OMAP3430_EN_GPT7				(1 << 8)
+#define OMAP3430_EN_GPT7_SHIFT				8
+#define OMAP3430_EN_GPT6				(1 << 7)
+#define OMAP3430_EN_GPT6_SHIFT				7
+#define OMAP3430_EN_GPT5				(1 << 6)
+#define OMAP3430_EN_GPT5_SHIFT				6
+#define OMAP3430_EN_GPT4				(1 << 5)
+#define OMAP3430_EN_GPT4_SHIFT				5
+#define OMAP3430_EN_GPT3				(1 << 4)
+#define OMAP3430_EN_GPT3_SHIFT				4
+#define OMAP3430_EN_GPT2				(1 << 3)
+#define OMAP3430_EN_GPT2_SHIFT				3
+
+/* CM_FCLKEN_PER, CM_ICLKEN_PER, PM_WKEN_PER, PM_WKST_PER shared bits */
+/* XXX Possible TI documentation bug: should the PM_WKST_PER EN_* bits
+ * be ST_* bits instead? */
+#define OMAP3430_EN_MCBSP4				(1 << 2)
+#define OMAP3430_EN_MCBSP4_SHIFT			2
+#define OMAP3430_EN_MCBSP3				(1 << 1)
+#define OMAP3430_EN_MCBSP3_SHIFT			1
+#define OMAP3430_EN_MCBSP2				(1 << 0)
+#define OMAP3430_EN_MCBSP2_SHIFT			0
+
+/* CM_IDLEST_PER, PM_WKST_PER shared bits */
+#define OMAP3430_ST_GPIO6				(1 << 17)
+#define OMAP3430_ST_GPIO5				(1 << 16)
+#define OMAP3430_ST_GPIO4				(1 << 15)
+#define OMAP3430_ST_GPIO3				(1 << 14)
+#define OMAP3430_ST_GPIO2				(1 << 13)
+#define OMAP3430_ST_UART3				(1 << 11)
+#define OMAP3430_ST_GPT9				(1 << 10)
+#define OMAP3430_ST_GPT8				(1 << 9)
+#define OMAP3430_ST_GPT7				(1 << 8)
+#define OMAP3430_ST_GPT6				(1 << 7)
+#define OMAP3430_ST_GPT5				(1 << 6)
+#define OMAP3430_ST_GPT4				(1 << 5)
+#define OMAP3430_ST_GPT3				(1 << 4)
+#define OMAP3430_ST_GPT2				(1 << 3)
+
+/* CM_SLEEPDEP_PER, PM_WKDEP_IVA2, PM_WKDEP_MPU, PM_WKDEP_PER shared bits */
+#define OMAP3430_EN_CORE				(1 << 0)
+
+#endif
+
diff --git a/arch/arm/mach-omap2/prcm-regs.h b/arch/arm/mach-omap2/prcm-regs.h
deleted file mode 100644
index 5e1c4b5..0000000
--- a/arch/arm/mach-omap2/prcm-regs.h
+++ /dev/null
@@ -1,483 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/prcm-regs.h
- *
- * OMAP24XX Power Reset and Clock Management (PRCM) registers
- *
- * Copyright (C) 2005 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_PRCM_H
-#define __ARCH_ARM_MACH_OMAP2_PRCM_H
-
-/* SET_PERFORMANCE_LEVEL PARAMETERS */
-#define PRCM_HALF_SPEED 1
-#define PRCM_FULL_SPEED 2
-
-#ifndef __ASSEMBLER__
-
-#define PRCM_REG32(offset)	__REG32(OMAP24XX_PRCM_BASE + (offset))
-
-#define PRCM_REVISION		PRCM_REG32(0x000)
-#define PRCM_SYSCONFIG		PRCM_REG32(0x010)
-#define PRCM_IRQSTATUS_MPU	PRCM_REG32(0x018)
-#define PRCM_IRQENABLE_MPU	PRCM_REG32(0x01C)
-#define PRCM_VOLTCTRL		PRCM_REG32(0x050)
-#define PRCM_VOLTST		PRCM_REG32(0x054)
-#define PRCM_CLKSRC_CTRL	PRCM_REG32(0x060)
-#define PRCM_CLKOUT_CTRL	PRCM_REG32(0x070)
-#define PRCM_CLKEMUL_CTRL	PRCM_REG32(0x078)
-#define PRCM_CLKCFG_CTRL	PRCM_REG32(0x080)
-#define PRCM_CLKCFG_STATUS	PRCM_REG32(0x084)
-#define PRCM_VOLTSETUP		PRCM_REG32(0x090)
-#define PRCM_CLKSSETUP		PRCM_REG32(0x094)
-#define PRCM_POLCTRL		PRCM_REG32(0x098)
-
-/* GENERAL PURPOSE */
-#define GENERAL_PURPOSE1	PRCM_REG32(0x0B0)
-#define GENERAL_PURPOSE2	PRCM_REG32(0x0B4)
-#define GENERAL_PURPOSE3	PRCM_REG32(0x0B8)
-#define GENERAL_PURPOSE4	PRCM_REG32(0x0BC)
-#define GENERAL_PURPOSE5	PRCM_REG32(0x0C0)
-#define GENERAL_PURPOSE6	PRCM_REG32(0x0C4)
-#define GENERAL_PURPOSE7	PRCM_REG32(0x0C8)
-#define GENERAL_PURPOSE8	PRCM_REG32(0x0CC)
-#define GENERAL_PURPOSE9	PRCM_REG32(0x0D0)
-#define GENERAL_PURPOSE10	PRCM_REG32(0x0D4)
-#define GENERAL_PURPOSE11	PRCM_REG32(0x0D8)
-#define GENERAL_PURPOSE12	PRCM_REG32(0x0DC)
-#define GENERAL_PURPOSE13	PRCM_REG32(0x0E0)
-#define GENERAL_PURPOSE14	PRCM_REG32(0x0E4)
-#define GENERAL_PURPOSE15	PRCM_REG32(0x0E8)
-#define GENERAL_PURPOSE16	PRCM_REG32(0x0EC)
-#define GENERAL_PURPOSE17	PRCM_REG32(0x0F0)
-#define GENERAL_PURPOSE18	PRCM_REG32(0x0F4)
-#define GENERAL_PURPOSE19	PRCM_REG32(0x0F8)
-#define GENERAL_PURPOSE20	PRCM_REG32(0x0FC)
-
-/* MPU */
-#define CM_CLKSEL_MPU		PRCM_REG32(0x140)
-#define CM_CLKSTCTRL_MPU	PRCM_REG32(0x148)
-#define RM_RSTST_MPU		PRCM_REG32(0x158)
-#define PM_WKDEP_MPU		PRCM_REG32(0x1C8)
-#define PM_EVGENCTRL_MPU	PRCM_REG32(0x1D4)
-#define PM_EVEGENONTIM_MPU	PRCM_REG32(0x1D8)
-#define PM_EVEGENOFFTIM_MPU	PRCM_REG32(0x1DC)
-#define PM_PWSTCTRL_MPU		PRCM_REG32(0x1E0)
-#define PM_PWSTST_MPU		PRCM_REG32(0x1E4)
-
-/* CORE */
-#define CM_FCLKEN1_CORE		PRCM_REG32(0x200)
-#define CM_FCLKEN2_CORE		PRCM_REG32(0x204)
-#define CM_FCLKEN3_CORE		PRCM_REG32(0x208)
-#define CM_ICLKEN1_CORE		PRCM_REG32(0x210)
-#define CM_ICLKEN2_CORE		PRCM_REG32(0x214)
-#define CM_ICLKEN3_CORE		PRCM_REG32(0x218)
-#define CM_ICLKEN4_CORE		PRCM_REG32(0x21C)
-#define CM_IDLEST1_CORE		PRCM_REG32(0x220)
-#define CM_IDLEST2_CORE		PRCM_REG32(0x224)
-#define CM_IDLEST3_CORE		PRCM_REG32(0x228)
-#define CM_IDLEST4_CORE		PRCM_REG32(0x22C)
-#define CM_AUTOIDLE1_CORE	PRCM_REG32(0x230)
-#define CM_AUTOIDLE2_CORE	PRCM_REG32(0x234)
-#define CM_AUTOIDLE3_CORE	PRCM_REG32(0x238)
-#define CM_AUTOIDLE4_CORE	PRCM_REG32(0x23C)
-#define CM_CLKSEL1_CORE		PRCM_REG32(0x240)
-#define CM_CLKSEL2_CORE		PRCM_REG32(0x244)
-#define CM_CLKSTCTRL_CORE	PRCM_REG32(0x248)
-#define PM_WKEN1_CORE		PRCM_REG32(0x2A0)
-#define PM_WKEN2_CORE		PRCM_REG32(0x2A4)
-#define PM_WKST1_CORE		PRCM_REG32(0x2B0)
-#define PM_WKST2_CORE		PRCM_REG32(0x2B4)
-#define PM_WKDEP_CORE		PRCM_REG32(0x2C8)
-#define PM_PWSTCTRL_CORE	PRCM_REG32(0x2E0)
-#define PM_PWSTST_CORE		PRCM_REG32(0x2E4)
-
-/* GFX */
-#define CM_FCLKEN_GFX		PRCM_REG32(0x300)
-#define CM_ICLKEN_GFX		PRCM_REG32(0x310)
-#define CM_IDLEST_GFX		PRCM_REG32(0x320)
-#define CM_CLKSEL_GFX		PRCM_REG32(0x340)
-#define CM_CLKSTCTRL_GFX	PRCM_REG32(0x348)
-#define RM_RSTCTRL_GFX		PRCM_REG32(0x350)
-#define RM_RSTST_GFX		PRCM_REG32(0x358)
-#define PM_WKDEP_GFX		PRCM_REG32(0x3C8)
-#define PM_PWSTCTRL_GFX		PRCM_REG32(0x3E0)
-#define PM_PWSTST_GFX		PRCM_REG32(0x3E4)
-
-/* WAKE-UP */
-#define CM_FCLKEN_WKUP		PRCM_REG32(0x400)
-#define CM_ICLKEN_WKUP		PRCM_REG32(0x410)
-#define CM_IDLEST_WKUP		PRCM_REG32(0x420)
-#define CM_AUTOIDLE_WKUP	PRCM_REG32(0x430)
-#define CM_CLKSEL_WKUP		PRCM_REG32(0x440)
-#define RM_RSTCTRL_WKUP		PRCM_REG32(0x450)
-#define RM_RSTTIME_WKUP		PRCM_REG32(0x454)
-#define RM_RSTST_WKUP		PRCM_REG32(0x458)
-#define PM_WKEN_WKUP		PRCM_REG32(0x4A0)
-#define PM_WKST_WKUP		PRCM_REG32(0x4B0)
-
-/* CLOCKS */
-#define CM_CLKEN_PLL		PRCM_REG32(0x500)
-#define CM_IDLEST_CKGEN		PRCM_REG32(0x520)
-#define CM_AUTOIDLE_PLL		PRCM_REG32(0x530)
-#define CM_CLKSEL1_PLL		PRCM_REG32(0x540)
-#define CM_CLKSEL2_PLL		PRCM_REG32(0x544)
-
-/* DSP */
-#define CM_FCLKEN_DSP		PRCM_REG32(0x800)
-#define CM_ICLKEN_DSP		PRCM_REG32(0x810)
-#define CM_IDLEST_DSP		PRCM_REG32(0x820)
-#define CM_AUTOIDLE_DSP		PRCM_REG32(0x830)
-#define CM_CLKSEL_DSP		PRCM_REG32(0x840)
-#define CM_CLKSTCTRL_DSP	PRCM_REG32(0x848)
-#define RM_RSTCTRL_DSP		PRCM_REG32(0x850)
-#define RM_RSTST_DSP		PRCM_REG32(0x858)
-#define PM_WKEN_DSP		PRCM_REG32(0x8A0)
-#define PM_WKDEP_DSP		PRCM_REG32(0x8C8)
-#define PM_PWSTCTRL_DSP		PRCM_REG32(0x8E0)
-#define PM_PWSTST_DSP		PRCM_REG32(0x8E4)
-#define PRCM_IRQSTATUS_DSP	PRCM_REG32(0x8F0)
-#define PRCM_IRQENABLE_DSP	PRCM_REG32(0x8F4)
-
-/* IVA */
-#define PRCM_IRQSTATUS_IVA	PRCM_REG32(0x8F8)
-#define PRCM_IRQENABLE_IVA	PRCM_REG32(0x8FC)
-
-/* Modem on 2430 */
-#define CM_FCLKEN_MDM		PRCM_REG32(0xC00)
-#define CM_ICLKEN_MDM		PRCM_REG32(0xC10)
-#define CM_IDLEST_MDM		PRCM_REG32(0xC20)
-#define CM_AUTOIDLE_MDM		PRCM_REG32(0xC30)
-#define CM_CLKSEL_MDM		PRCM_REG32(0xC40)
-#define CM_CLKSTCTRL_MDM	PRCM_REG32(0xC48)
-#define RM_RSTCTRL_MDM		PRCM_REG32(0xC50)
-#define RM_RSTST_MDM		PRCM_REG32(0xC58)
-#define PM_WKEN_MDM		PRCM_REG32(0xCA0)
-#define PM_WKST_MDM		PRCM_REG32(0xCB0)
-#define PM_WKDEP_MDM		PRCM_REG32(0xCC8)
-#define PM_PWSTCTRL_MDM		PRCM_REG32(0xCE0)
-#define PM_PWSTST_MDM		PRCM_REG32(0xCE4)
-
-#define OMAP24XX_L4_IO_BASE	0x48000000
-
-#define DISP_BASE		(OMAP24XX_L4_IO_BASE + 0x50000)
-#define DISP_REG32(offset)	__REG32(DISP_BASE + (offset))
-
-#define OMAP24XX_GPMC_BASE	(L3_24XX_BASE + 0xa000)
-#define GPMC_REG32(offset)	__REG32(OMAP24XX_GPMC_BASE + (offset))
-
-/* FIXME: Move these to timer code */
-#define GPT1_BASE		(0x48028000)
-#define GPT1_REG32(offset)	__REG32(GPT1_BASE + (offset))
-
-/* Misc sysconfig */
-#define DISPC_SYSCONFIG		DISP_REG32(0x410)
-#define SPI_BASE		(OMAP24XX_L4_IO_BASE + 0x98000)
-#define MCSPI1_SYSCONFIG	__REG32(SPI_BASE + 0x10)
-#define MCSPI2_SYSCONFIG	__REG32(SPI_BASE + 0x2000 + 0x10)
-#define MCSPI3_SYSCONFIG	__REG32(OMAP24XX_L4_IO_BASE + 0xb8010)
-
-#define CAMERA_MMU_SYSCONFIG	__REG32(DISP_BASE + 0x2C10)
-#define CAMERA_DMA_SYSCONFIG	__REG32(DISP_BASE + 0x282C)
-#define SYSTEM_DMA_SYSCONFIG	__REG32(DISP_BASE + 0x602C)
-#define GPMC_SYSCONFIG		GPMC_REG32(0x010)
-#define MAILBOXES_SYSCONFIG	__REG32(OMAP24XX_L4_IO_BASE + 0x94010)
-#define UART1_SYSCONFIG		__REG32(OMAP24XX_L4_IO_BASE + 0x6A054)
-#define UART2_SYSCONFIG		__REG32(OMAP24XX_L4_IO_BASE + 0x6C054)
-#define UART3_SYSCONFIG		__REG32(OMAP24XX_L4_IO_BASE + 0x6E054)
-#define SDRC_SYSCONFIG		__REG32(OMAP24XX_SDRC_BASE + 0x10)
-#define OMAP24XX_SMS_BASE	(L3_24XX_BASE + 0x8000)
-#define SMS_SYSCONFIG		__REG32(OMAP24XX_SMS_BASE + 0x10)
-#define SSI_SYSCONFIG		__REG32(DISP_BASE + 0x8010)
-
-/* rkw - good cannidates for PM_ to start what nm was trying */
-#define OMAP24XX_GPT2		(OMAP24XX_L4_IO_BASE + 0x2A000)
-#define OMAP24XX_GPT3		(OMAP24XX_L4_IO_BASE + 0x78000)
-#define OMAP24XX_GPT4		(OMAP24XX_L4_IO_BASE + 0x7A000)
-#define OMAP24XX_GPT5		(OMAP24XX_L4_IO_BASE + 0x7C000)
-#define OMAP24XX_GPT6		(OMAP24XX_L4_IO_BASE + 0x7E000)
-#define OMAP24XX_GPT7		(OMAP24XX_L4_IO_BASE + 0x80000)
-#define OMAP24XX_GPT8		(OMAP24XX_L4_IO_BASE + 0x82000)
-#define OMAP24XX_GPT9		(OMAP24XX_L4_IO_BASE + 0x84000)
-#define OMAP24XX_GPT10		(OMAP24XX_L4_IO_BASE + 0x86000)
-#define OMAP24XX_GPT11		(OMAP24XX_L4_IO_BASE + 0x88000)
-#define OMAP24XX_GPT12		(OMAP24XX_L4_IO_BASE + 0x8A000)
-
-/* FIXME: Move these to timer code */
-#define GPTIMER1_SYSCONFIG	GPT1_REG32(0x010)
-#define GPTIMER2_SYSCONFIG	__REG32(OMAP24XX_GPT2 + 0x10)
-#define GPTIMER3_SYSCONFIG	__REG32(OMAP24XX_GPT3 + 0x10)
-#define GPTIMER4_SYSCONFIG	__REG32(OMAP24XX_GPT4 + 0x10)
-#define GPTIMER5_SYSCONFIG	__REG32(OMAP24XX_GPT5 + 0x10)
-#define GPTIMER6_SYSCONFIG	__REG32(OMAP24XX_GPT6 + 0x10)
-#define GPTIMER7_SYSCONFIG	__REG32(OMAP24XX_GPT7 + 0x10)
-#define GPTIMER8_SYSCONFIG	__REG32(OMAP24XX_GPT8 + 0x10)
-#define GPTIMER9_SYSCONFIG	__REG32(OMAP24XX_GPT9 + 0x10)
-#define GPTIMER10_SYSCONFIG	__REG32(OMAP24XX_GPT10 + 0x10)
-#define GPTIMER11_SYSCONFIG	__REG32(OMAP24XX_GPT11 + 0x10)
-#define GPTIMER12_SYSCONFIG	__REG32(OMAP24XX_GPT12 + 0x10)
-
-/* FIXME: Move these to gpio code */
-#define OMAP24XX_GPIO_BASE	0x48018000
-#define GPIOX_BASE(X)		(OMAP24XX_GPIO_BASE + (0x2000 * ((X) - 1)))
-
-#define GPIO1_SYSCONFIG		__REG32((GPIOX_BASE(1) + 0x10))
-#define GPIO2_SYSCONFIG		__REG32((GPIOX_BASE(2) + 0x10))
-#define GPIO3_SYSCONFIG		__REG32((GPIOX_BASE(3) + 0x10))
-#define GPIO4_SYSCONFIG		__REG32((GPIOX_BASE(4) + 0x10))
-
-#if defined(CONFIG_ARCH_OMAP243X)
-#define GPIO5_SYSCONFIG		__REG32((OMAP24XX_GPIO5_BASE + 0x10))
-#endif
-
-/* GP TIMER 1 */
-#define GPTIMER1_TISTAT		GPT1_REG32(0x014)
-#define GPTIMER1_TISR		GPT1_REG32(0x018)
-#define GPTIMER1_TIER		GPT1_REG32(0x01C)
-#define GPTIMER1_TWER		GPT1_REG32(0x020)
-#define GPTIMER1_TCLR		GPT1_REG32(0x024)
-#define GPTIMER1_TCRR		GPT1_REG32(0x028)
-#define GPTIMER1_TLDR		GPT1_REG32(0x02C)
-#define GPTIMER1_TTGR		GPT1_REG32(0x030)
-#define GPTIMER1_TWPS		GPT1_REG32(0x034)
-#define GPTIMER1_TMAR		GPT1_REG32(0x038)
-#define GPTIMER1_TCAR1		GPT1_REG32(0x03C)
-#define GPTIMER1_TSICR		GPT1_REG32(0x040)
-#define GPTIMER1_TCAR2		GPT1_REG32(0x044)
-
-/* rkw -- base fix up please... */
-#define GPTIMER3_TISR		__REG32(OMAP24XX_L4_IO_BASE + 0x78018)
-
-/* SDRC */
-#define SDRC_DLLA_CTRL		__REG32(OMAP24XX_SDRC_BASE + 0x060)
-#define SDRC_DLLA_STATUS	__REG32(OMAP24XX_SDRC_BASE + 0x064)
-#define SDRC_DLLB_CTRL		__REG32(OMAP24XX_SDRC_BASE + 0x068)
-#define SDRC_DLLB_STATUS	__REG32(OMAP24XX_SDRC_BASE + 0x06C)
-#define SDRC_POWER		__REG32(OMAP24XX_SDRC_BASE + 0x070)
-#define SDRC_MR_0		__REG32(OMAP24XX_SDRC_BASE + 0x084)
-
-/* GPIO 1 */
-#define GPIO1_BASE		GPIOX_BASE(1)
-#define GPIO1_REG32(offset)	__REG32(GPIO1_BASE + (offset))
-#define GPIO1_IRQENABLE1	GPIO1_REG32(0x01C)
-#define GPIO1_IRQSTATUS1	GPIO1_REG32(0x018)
-#define GPIO1_IRQENABLE2	GPIO1_REG32(0x02C)
-#define GPIO1_IRQSTATUS2	GPIO1_REG32(0x028)
-#define GPIO1_WAKEUPENABLE	GPIO1_REG32(0x020)
-#define GPIO1_RISINGDETECT	GPIO1_REG32(0x048)
-#define GPIO1_DATAIN		GPIO1_REG32(0x038)
-#define GPIO1_OE		GPIO1_REG32(0x034)
-#define GPIO1_DATAOUT		GPIO1_REG32(0x03C)
-
-/* GPIO2 */
-#define GPIO2_BASE		GPIOX_BASE(2)
-#define GPIO2_REG32(offset)	__REG32(GPIO2_BASE + (offset))
-#define GPIO2_IRQENABLE1	GPIO2_REG32(0x01C)
-#define GPIO2_IRQSTATUS1	GPIO2_REG32(0x018)
-#define GPIO2_IRQENABLE2	GPIO2_REG32(0x02C)
-#define GPIO2_IRQSTATUS2	GPIO2_REG32(0x028)
-#define GPIO2_WAKEUPENABLE	GPIO2_REG32(0x020)
-#define GPIO2_RISINGDETECT	GPIO2_REG32(0x048)
-#define GPIO2_DATAIN		GPIO2_REG32(0x038)
-#define GPIO2_OE		GPIO2_REG32(0x034)
-#define GPIO2_DATAOUT		GPIO2_REG32(0x03C)
-#define GPIO2_DEBOUNCENABLE	GPIO2_REG32(0x050)
-#define GPIO2_DEBOUNCINGTIME	GPIO2_REG32(0x054)
-
-/* GPIO 3 */
-#define GPIO3_BASE		GPIOX_BASE(3)
-#define GPIO3_REG32(offset)	__REG32(GPIO3_BASE + (offset))
-#define GPIO3_IRQENABLE1	GPIO3_REG32(0x01C)
-#define GPIO3_IRQSTATUS1	GPIO3_REG32(0x018)
-#define GPIO3_IRQENABLE2	GPIO3_REG32(0x02C)
-#define GPIO3_IRQSTATUS2	GPIO3_REG32(0x028)
-#define GPIO3_WAKEUPENABLE	GPIO3_REG32(0x020)
-#define GPIO3_RISINGDETECT	GPIO3_REG32(0x048)
-#define GPIO3_FALLINGDETECT	GPIO3_REG32(0x04C)
-#define GPIO3_DATAIN		GPIO3_REG32(0x038)
-#define GPIO3_OE		GPIO3_REG32(0x034)
-#define GPIO3_DATAOUT		GPIO3_REG32(0x03C)
-#define GPIO3_DEBOUNCENABLE	GPIO3_REG32(0x050)
-#define GPIO3_DEBOUNCINGTIME	GPIO3_REG32(0x054)
-#define GPIO3_DEBOUNCENABLE	GPIO3_REG32(0x050)
-#define GPIO3_DEBOUNCINGTIME	GPIO3_REG32(0x054)
-
-/* GPIO 4 */
-#define GPIO4_BASE		GPIOX_BASE(4)
-#define GPIO4_REG32(offset)	__REG32(GPIO4_BASE + (offset))
-#define GPIO4_IRQENABLE1	GPIO4_REG32(0x01C)
-#define GPIO4_IRQSTATUS1	GPIO4_REG32(0x018)
-#define GPIO4_IRQENABLE2	GPIO4_REG32(0x02C)
-#define GPIO4_IRQSTATUS2	GPIO4_REG32(0x028)
-#define GPIO4_WAKEUPENABLE	GPIO4_REG32(0x020)
-#define GPIO4_RISINGDETECT	GPIO4_REG32(0x048)
-#define GPIO4_FALLINGDETECT	GPIO4_REG32(0x04C)
-#define GPIO4_DATAIN		GPIO4_REG32(0x038)
-#define GPIO4_OE		GPIO4_REG32(0x034)
-#define GPIO4_DATAOUT		GPIO4_REG32(0x03C)
-#define GPIO4_DEBOUNCENABLE	GPIO4_REG32(0x050)
-#define GPIO4_DEBOUNCINGTIME	GPIO4_REG32(0x054)
-
-#if defined(CONFIG_ARCH_OMAP243X)
-/* GPIO 5 */
-#define GPIO5_REG32(offset)	__REG32((OMAP24XX_GPIO5_BASE + (offset)))
-#define GPIO5_IRQENABLE1	GPIO5_REG32(0x01C)
-#define GPIO5_IRQSTATUS1	GPIO5_REG32(0x018)
-#define GPIO5_IRQENABLE2	GPIO5_REG32(0x02C)
-#define GPIO5_IRQSTATUS2	GPIO5_REG32(0x028)
-#define GPIO5_WAKEUPENABLE	GPIO5_REG32(0x020)
-#define GPIO5_RISINGDETECT	GPIO5_REG32(0x048)
-#define GPIO5_FALLINGDETECT	GPIO5_REG32(0x04C)
-#define GPIO5_DATAIN		GPIO5_REG32(0x038)
-#define GPIO5_OE		GPIO5_REG32(0x034)
-#define GPIO5_DATAOUT		GPIO5_REG32(0x03C)
-#define GPIO5_DEBOUNCENABLE	GPIO5_REG32(0x050)
-#define GPIO5_DEBOUNCINGTIME	GPIO5_REG32(0x054)
-#endif
-
-/* IO CONFIG */
-#define OMAP24XX_CTRL_BASE		(L4_24XX_BASE)
-#define CONTROL_REG32(offset)		__REG32(OMAP24XX_CTRL_BASE + (offset))
-
-#define CONTROL_PADCONF_SPI1_NCS2	CONTROL_REG32(0x104)
-#define CONTROL_PADCONF_SYS_XTALOUT	CONTROL_REG32(0x134)
-#define CONTROL_PADCONF_UART1_RX	CONTROL_REG32(0x0C8)
-#define CONTROL_PADCONF_MCBSP1_DX	CONTROL_REG32(0x10C)
-#define CONTROL_PADCONF_GPMC_NCS4	CONTROL_REG32(0x090)
-#define CONTROL_PADCONF_DSS_D5		CONTROL_REG32(0x0B8)
-#define CONTROL_PADCONF_DSS_D9		CONTROL_REG32(0x0BC)	/* 2420 */
-#define CONTROL_PADCONF_DSS_D13		CONTROL_REG32(0x0C0)
-#define CONTROL_PADCONF_DSS_VSYNC	CONTROL_REG32(0x0CC)
-#define CONTROL_PADCONF_SYS_NIRQW0	CONTROL_REG32(0x0BC)	/* 2430 */
-#define CONTROL_PADCONF_SSI1_FLAG_TX	CONTROL_REG32(0x108)	/* 2430 */
-
-/* CONTROL */
-#define CONTROL_DEVCONF		CONTROL_REG32(0x274)
-#define CONTROL_DEVCONF1	CONTROL_REG32(0x2E8)
-
-/* INTERRUPT CONTROLLER */
-#define INTC_BASE		((L4_24XX_BASE) + 0xfe000)
-#define INTC_REG32(offset)	__REG32(INTC_BASE + (offset))
-
-#define INTC1_U_BASE		INTC_REG32(0x000)
-#define INTC_MIR0		INTC_REG32(0x084)
-#define INTC_MIR_SET0		INTC_REG32(0x08C)
-#define INTC_MIR_CLEAR0		INTC_REG32(0x088)
-#define INTC_ISR_CLEAR0		INTC_REG32(0x094)
-#define INTC_MIR1		INTC_REG32(0x0A4)
-#define INTC_MIR_SET1		INTC_REG32(0x0AC)
-#define INTC_MIR_CLEAR1		INTC_REG32(0x0A8)
-#define INTC_ISR_CLEAR1		INTC_REG32(0x0B4)
-#define INTC_MIR2		INTC_REG32(0x0C4)
-#define INTC_MIR_SET2		INTC_REG32(0x0CC)
-#define INTC_MIR_CLEAR2		INTC_REG32(0x0C8)
-#define INTC_ISR_CLEAR2		INTC_REG32(0x0D4)
-#define INTC_SIR_IRQ		INTC_REG32(0x040)
-#define INTC_CONTROL		INTC_REG32(0x048)
-#define INTC_ILR11		INTC_REG32(0x12C)	/* PRCM on MPU PIC */
-#define INTC_ILR30		INTC_REG32(0x178)
-#define INTC_ILR31		INTC_REG32(0x17C)
-#define INTC_ILR32		INTC_REG32(0x180)
-#define INTC_ILR37		INTC_REG32(0x194)	/* GPIO4 on MPU PIC */
-#define INTC_SYSCONFIG		INTC_REG32(0x010)	/* GPT1 on MPU PIC */
-
-/* RAM FIREWALL */
-#define RAMFW_BASE		(0x68005000)
-#define RAMFW_REG32(offset)	__REG32(RAMFW_BASE + (offset))
-
-#define RAMFW_REQINFOPERM0	RAMFW_REG32(0x048)
-#define RAMFW_READPERM0		RAMFW_REG32(0x050)
-#define RAMFW_WRITEPERM0	RAMFW_REG32(0x058)
-
-/* GPMC CS1 FPGA ON USER INTERFACE MODULE */
-//#define DEBUG_BOARD_LED_REGISTER 0x04000014
-
-/* GPMC CS0 */
-#define GPMC_CONFIG1_0		GPMC_REG32(0x060)
-#define GPMC_CONFIG2_0		GPMC_REG32(0x064)
-#define GPMC_CONFIG3_0		GPMC_REG32(0x068)
-#define GPMC_CONFIG4_0		GPMC_REG32(0x06C)
-#define GPMC_CONFIG5_0		GPMC_REG32(0x070)
-#define GPMC_CONFIG6_0		GPMC_REG32(0x074)
-#define GPMC_CONFIG7_0		GPMC_REG32(0x078)
-
-/* GPMC CS1 */
-#define GPMC_CONFIG1_1		GPMC_REG32(0x090)
-#define GPMC_CONFIG2_1		GPMC_REG32(0x094)
-#define GPMC_CONFIG3_1		GPMC_REG32(0x098)
-#define GPMC_CONFIG4_1		GPMC_REG32(0x09C)
-#define GPMC_CONFIG5_1		GPMC_REG32(0x0a0)
-#define GPMC_CONFIG6_1		GPMC_REG32(0x0a4)
-#define GPMC_CONFIG7_1		GPMC_REG32(0x0a8)
-
-/* GPMC CS3 */
-#define GPMC_CONFIG1_3		GPMC_REG32(0x0F0)
-#define GPMC_CONFIG2_3		GPMC_REG32(0x0F4)
-#define GPMC_CONFIG3_3		GPMC_REG32(0x0F8)
-#define GPMC_CONFIG4_3		GPMC_REG32(0x0FC)
-#define GPMC_CONFIG5_3		GPMC_REG32(0x100)
-#define GPMC_CONFIG6_3		GPMC_REG32(0x104)
-#define GPMC_CONFIG7_3		GPMC_REG32(0x108)
-
-/* DSS */
-#define DSS_CONTROL		DISP_REG32(0x040)
-#define DISPC_CONTROL		DISP_REG32(0x440)
-#define DISPC_SYSSTATUS		DISP_REG32(0x414)
-#define DISPC_IRQSTATUS		DISP_REG32(0x418)
-#define DISPC_IRQENABLE		DISP_REG32(0x41C)
-#define DISPC_CONFIG		DISP_REG32(0x444)
-#define DISPC_DEFAULT_COLOR0	DISP_REG32(0x44C)
-#define DISPC_DEFAULT_COLOR1	DISP_REG32(0x450)
-#define DISPC_TRANS_COLOR0	DISP_REG32(0x454)
-#define DISPC_TRANS_COLOR1	DISP_REG32(0x458)
-#define DISPC_LINE_NUMBER	DISP_REG32(0x460)
-#define DISPC_TIMING_H		DISP_REG32(0x464)
-#define DISPC_TIMING_V		DISP_REG32(0x468)
-#define DISPC_POL_FREQ		DISP_REG32(0x46C)
-#define DISPC_DIVISOR		DISP_REG32(0x470)
-#define DISPC_SIZE_DIG		DISP_REG32(0x478)
-#define DISPC_SIZE_LCD		DISP_REG32(0x47C)
-#define DISPC_GFX_BA0		DISP_REG32(0x480)
-#define DISPC_GFX_BA1		DISP_REG32(0x484)
-#define DISPC_GFX_POSITION	DISP_REG32(0x488)
-#define DISPC_GFX_SIZE		DISP_REG32(0x48C)
-#define DISPC_GFX_ATTRIBUTES	DISP_REG32(0x4A0)
-#define DISPC_GFX_FIFO_THRESHOLD	DISP_REG32(0x4A4)
-#define DISPC_GFX_ROW_INC	DISP_REG32(0x4AC)
-#define DISPC_GFX_PIXEL_INC	DISP_REG32(0x4B0)
-#define DISPC_GFX_WINDOW_SKIP	DISP_REG32(0x4B4)
-#define DISPC_GFX_TABLE_BA	DISP_REG32(0x4B8)
-#define DISPC_DATA_CYCLE1	DISP_REG32(0x5D4)
-#define DISPC_DATA_CYCLE2	DISP_REG32(0x5D8)
-#define DISPC_DATA_CYCLE3	DISP_REG32(0x5DC)
-
-/* HSUSB Suspend */
-#define HSUSB_CTRL		__REG8(0x480AC001)
-#define USBOTG_POWER		__REG32(0x480AC000)
-
-/* HS MMC */
-#define MMCHS1_SYSCONFIG	__REG32(0x4809C010)
-#define MMCHS2_SYSCONFIG	__REG32(0x480b4010)
-
-#endif	/* __ASSEMBLER__ */
-
-#endif
-
-
-
-
-
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index 90f5305..b12f423 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -17,19 +17,27 @@
 #include <linux/init.h>
 #include <linux/clk.h>
 
-#include "prcm-regs.h"
+#include <asm/io.h>
+
+#include "prm.h"
+#include "prm-regbits-24xx.h"
 
 extern void omap2_clk_prepare_for_reboot(void);
 
 u32 omap_prcm_get_reset_sources(void)
 {
-	return RM_RSTST_WKUP & 0x7f;
+	return prm_read_mod_reg(WKUP_MOD, RM_RSTST) & 0x7f;
 }
 EXPORT_SYMBOL(omap_prcm_get_reset_sources);
 
 /* Resets clock rates and reboots the system. Only called from system.h */
 void omap_prcm_arch_reset(char mode)
 {
+	u32 wkup;
 	omap2_clk_prepare_for_reboot();
-	RM_RSTCTRL_WKUP |= 2;
+
+	if (cpu_is_omap24xx()) {
+		wkup = prm_read_mod_reg(WKUP_MOD, RM_RSTCTRL) | OMAP_RST_DPLL3;
+		prm_write_mod_reg(wkup, WKUP_MOD, RM_RSTCTRL);
+	}
 }
diff --git a/arch/arm/mach-omap2/prm-regbits-24xx.h b/arch/arm/mach-omap2/prm-regbits-24xx.h
new file mode 100644
index 0000000..c6d17a3
--- /dev/null
+++ b/arch/arm/mach-omap2/prm-regbits-24xx.h
@@ -0,0 +1,279 @@
+#ifndef __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_24XX_H
+#define __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_24XX_H
+
+/*
+ * OMAP24XX Power/Reset Management register bits
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Copyright (C) 2007 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "prm.h"
+
+/* Bits shared between registers */
+
+/* PRCM_IRQSTATUS_MPU, PM_IRQSTATUS_DSP, PRCM_IRQSTATUS_IVA shared bits */
+#define OMAP24XX_VOLTTRANS_ST				(1 << 2)
+#define OMAP24XX_WKUP2_ST				(1 << 1)
+#define OMAP24XX_WKUP1_ST				(1 << 0)
+
+/* PRCM_IRQENABLE_MPU, PM_IRQENABLE_DSP, PRCM_IRQENABLE_IVA shared bits */
+#define OMAP24XX_VOLTTRANS_EN				(1 << 2)
+#define OMAP24XX_WKUP2_EN				(1 << 1)
+#define OMAP24XX_WKUP1_EN				(1 << 0)
+
+/* PM_WKDEP_GFX, PM_WKDEP_MPU, PM_WKDEP_DSP, PM_WKDEP_MDM shared bits */
+#define OMAP24XX_EN_MPU					(1 << 1)
+#define OMAP24XX_EN_CORE				(1 << 0)
+
+/*
+ * PM_PWSTCTRL_MPU, PM_PWSTCTRL_GFX, PM_PWSTCTRL_DSP, PM_PWSTCTRL_MDM
+ * shared bits
+ */
+#define OMAP24XX_MEMONSTATE_SHIFT			10
+#define OMAP24XX_MEMONSTATE_MASK			(0x3 << 10)
+#define OMAP24XX_MEMRETSTATE				(1 << 3)
+
+/* PM_PWSTCTRL_GFX, PM_PWSTCTRL_DSP, PM_PWSTCTRL_MDM shared bits */
+#define OMAP24XX_FORCESTATE				(1 << 18)
+
+/*
+ * PM_PWSTST_CORE, PM_PWSTST_GFX, PM_PWSTST_MPU, PM_PWSTST_DSP,
+ * PM_PWSTST_MDM shared bits
+ */
+#define OMAP24XX_CLKACTIVITY				(1 << 19)
+
+/* PM_PWSTST_MPU, PM_PWSTST_CORE, PM_PWSTST_DSP shared bits */
+#define OMAP24XX_LASTSTATEENTERED_SHIFT			4
+#define OMAP24XX_LASTSTATEENTERED_MASK			(0x3 << 4)
+
+/* PM_PWSTST_MPU and PM_PWSTST_DSP shared bits */
+#define OMAP2430_MEMSTATEST_SHIFT			10
+#define OMAP2430_MEMSTATEST_MASK			(0x3 << 10)
+
+/* PM_PWSTST_GFX, PM_PWSTST_DSP, PM_PWSTST_MDM shared bits */
+#define OMAP24XX_POWERSTATEST_SHIFT			0
+#define OMAP24XX_POWERSTATEST_MASK			(0x3 << 0)
+
+
+/* Bits specific to each register */
+
+/* PRCM_REVISION */
+#define OMAP24XX_REV_SHIFT				0
+#define OMAP24XX_REV_MASK				(0xff << 0)
+
+/* PRCM_SYSCONFIG */
+#define OMAP24XX_AUTOIDLE				(1 << 0)
+
+/* PRCM_IRQSTATUS_MPU specific bits */
+#define OMAP2430_DPLL_RECAL_ST				(1 << 6)
+#define OMAP24XX_TRANSITION_ST				(1 << 5)
+#define OMAP24XX_EVGENOFF_ST				(1 << 4)
+#define OMAP24XX_EVGENON_ST				(1 << 3)
+
+/* PRCM_IRQENABLE_MPU specific bits */
+#define OMAP2430_DPLL_RECAL_EN				(1 << 6)
+#define OMAP24XX_TRANSITION_EN				(1 << 5)
+#define OMAP24XX_EVGENOFF_EN				(1 << 4)
+#define OMAP24XX_EVGENON_EN				(1 << 3)
+
+/* PRCM_VOLTCTRL */
+#define OMAP24XX_AUTO_EXTVOLT				(1 << 15)
+#define OMAP24XX_FORCE_EXTVOLT				(1 << 14)
+#define OMAP24XX_SETOFF_LEVEL_SHIFT			12
+#define OMAP24XX_SETOFF_LEVEL_MASK			(0x3 << 12)
+#define OMAP24XX_MEMRETCTRL				(1 << 8)
+#define OMAP24XX_SETRET_LEVEL_SHIFT			6
+#define OMAP24XX_SETRET_LEVEL_MASK			(0x3 << 6)
+#define OMAP24XX_VOLT_LEVEL_SHIFT			0
+#define OMAP24XX_VOLT_LEVEL_MASK			(0x3 << 0)
+
+/* PRCM_VOLTST */
+#define OMAP24XX_ST_VOLTLEVEL_SHIFT			0
+#define OMAP24XX_ST_VOLTLEVEL_MASK			(0x3 << 0)
+
+/* PRCM_CLKSRC_CTRL specific bits */
+
+/* PRCM_CLKOUT_CTRL */
+#define OMAP2420_CLKOUT2_EN_SHIFT			15
+#define OMAP2420_CLKOUT2_EN				(1 << 15)
+#define OMAP2420_CLKOUT2_DIV_SHIFT			11
+#define OMAP2420_CLKOUT2_DIV_MASK			(0x7 << 11)
+#define OMAP2420_CLKOUT2_SOURCE_SHIFT			8
+#define OMAP2420_CLKOUT2_SOURCE_MASK			(0x3 << 8)
+#define OMAP24XX_CLKOUT_EN_SHIFT			7
+#define OMAP24XX_CLKOUT_EN				(1 << 7)
+#define OMAP24XX_CLKOUT_DIV_SHIFT			3
+#define OMAP24XX_CLKOUT_DIV_MASK			(0x7 << 3)
+#define OMAP24XX_CLKOUT_SOURCE_SHIFT			0
+#define OMAP24XX_CLKOUT_SOURCE_MASK			(0x3 << 0)
+
+/* PRCM_CLKEMUL_CTRL */
+#define OMAP24XX_EMULATION_EN_SHIFT			0
+#define OMAP24XX_EMULATION_EN				(1 << 0)
+
+/* PRCM_CLKCFG_CTRL */
+#define OMAP24XX_VALID_CONFIG				(1 << 0)
+
+/* PRCM_CLKCFG_STATUS */
+#define OMAP24XX_CONFIG_STATUS				(1 << 0)
+
+/* PRCM_VOLTSETUP specific bits */
+
+/* PRCM_CLKSSETUP specific bits */
+
+/* PRCM_POLCTRL */
+#define OMAP2420_CLKOUT2_POL				(1 << 10)
+#define OMAP24XX_CLKOUT_POL				(1 << 9)
+#define OMAP24XX_CLKREQ_POL				(1 << 8)
+#define OMAP2430_USE_POWEROK				(1 << 2)
+#define OMAP2430_POWEROK_POL				(1 << 1)
+#define OMAP24XX_EXTVOL_POL				(1 << 0)
+
+/* RM_RSTST_MPU specific bits */
+/* 2430 calls GLOBALWMPU_RST "GLOBALWARM_RST" instead */
+
+/* PM_WKDEP_MPU specific bits */
+#define OMAP2430_PM_WKDEP_MPU_EN_MDM			(1 << 5)
+#define OMAP24XX_PM_WKDEP_MPU_EN_DSP			(1 << 2)
+
+/* PM_EVGENCTRL_MPU specific bits */
+
+/* PM_EVEGENONTIM_MPU specific bits */
+
+/* PM_EVEGENOFFTIM_MPU specific bits */
+
+/* PM_PWSTCTRL_MPU specific bits */
+#define OMAP2430_FORCESTATE				(1 << 18)
+
+/* PM_PWSTST_MPU specific bits */
+/* INTRANSITION, CLKACTIVITY, POWERSTATE, MEMSTATEST are 2430 only */
+
+/* PM_WKEN1_CORE specific bits */
+
+/* PM_WKEN2_CORE specific bits */
+
+/* PM_WKST1_CORE specific bits*/
+
+/* PM_WKST2_CORE specific bits */
+
+/* PM_WKDEP_CORE specific bits*/
+#define OMAP2430_PM_WKDEP_CORE_EN_MDM			(1 << 5)
+#define OMAP24XX_PM_WKDEP_CORE_EN_GFX			(1 << 3)
+#define OMAP24XX_PM_WKDEP_CORE_EN_DSP			(1 << 2)
+
+/* PM_PWSTCTRL_CORE specific bits */
+#define OMAP24XX_MEMORYCHANGE				(1 << 20)
+#define OMAP24XX_MEM3ONSTATE_SHIFT			14
+#define OMAP24XX_MEM3ONSTATE_MASK			(0x3 << 14)
+#define OMAP24XX_MEM2ONSTATE_SHIFT			12
+#define OMAP24XX_MEM2ONSTATE_MASK			(0x3 << 12)
+#define OMAP24XX_MEM1ONSTATE_SHIFT			10
+#define OMAP24XX_MEM1ONSTATE_MASK			(0x3 << 10)
+#define OMAP24XX_MEM3RETSTATE				(1 << 5)
+#define OMAP24XX_MEM2RETSTATE				(1 << 4)
+#define OMAP24XX_MEM1RETSTATE				(1 << 3)
+
+/* PM_PWSTST_CORE specific bits */
+#define OMAP24XX_MEM3STATEST_SHIFT			14
+#define OMAP24XX_MEM3STATEST_MASK			(0x3 << 14)
+#define OMAP24XX_MEM2STATEST_SHIFT			12
+#define OMAP24XX_MEM2STATEST_MASK			(0x3 << 12)
+#define OMAP24XX_MEM1STATEST_SHIFT			10
+#define OMAP24XX_MEM1STATEST_MASK			(0x3 << 10)
+
+/* RM_RSTCTRL_GFX */
+#define OMAP24XX_GFX_RST				(1 << 0)
+
+/* RM_RSTST_GFX specific bits */
+#define OMAP24XX_GFX_SW_RST				(1 << 4)
+
+/* PM_PWSTCTRL_GFX specific bits */
+
+/* PM_WKDEP_GFX specific bits */
+/* 2430 often calls EN_WAKEUP "EN_WKUP" */
+
+/* RM_RSTCTRL_WKUP specific bits */
+
+/* RM_RSTTIME_WKUP specific bits */
+
+/* RM_RSTST_WKUP specific bits */
+/* 2430 calls EXTWMPU_RST "EXTWARM_RST" and GLOBALWMPU_RST "GLOBALWARM_RST" */
+#define OMAP24XX_EXTWMPU_RST				(1 << 6)
+#define OMAP24XX_SECU_WD_RST				(1 << 5)
+#define OMAP24XX_MPU_WD_RST				(1 << 4)
+#define OMAP24XX_SECU_VIOL_RST				(1 << 3)
+
+/* PM_WKEN_WKUP specific bits */
+
+/* PM_WKST_WKUP specific bits */
+
+/* RM_RSTCTRL_DSP */
+#define OMAP2420_RST_IVA				(1 << 8)
+#define OMAP24XX_RST2_DSP				(1 << 1)
+#define OMAP24XX_RST1_DSP				(1 << 0)
+
+/* RM_RSTST_DSP specific bits */
+/* 2430 calls GLOBALWMPU_RST "GLOBALWARM_RST" */
+#define OMAP2420_IVA_SW_RST				(1 << 8)
+#define OMAP24XX_DSP_SW_RST2				(1 << 5)
+#define OMAP24XX_DSP_SW_RST1				(1 << 4)
+
+/* PM_WKDEP_DSP specific bits */
+
+/* PM_PWSTCTRL_DSP specific bits */
+/* 2430 only: MEMONSTATE, MEMRETSTATE */
+#define OMAP2420_MEMIONSTATE_SHIFT			12
+#define OMAP2420_MEMIONSTATE_MASK			(0x3 << 12)
+#define OMAP2420_MEMIRETSTATE				(1 << 4)
+
+/* PM_PWSTST_DSP specific bits */
+/* MEMSTATEST is 2430 only */
+#define OMAP2420_MEMISTATEST_SHIFT			12
+#define OMAP2420_MEMISTATEST_MASK			(0x3 << 12)
+
+/* PRCM_IRQSTATUS_DSP specific bits */
+
+/* PRCM_IRQENABLE_DSP specific bits */
+
+/* RM_RSTCTRL_MDM */
+/* 2430 only */
+#define OMAP2430_PWRON1_MDM				(1 << 1)
+#define OMAP2430_RST1_MDM				(1 << 0)
+
+/* RM_RSTST_MDM specific bits */
+/* 2430 only */
+#define OMAP2430_MDM_SECU_VIOL				(1 << 6)
+#define OMAP2430_MDM_SW_PWRON1				(1 << 5)
+#define OMAP2430_MDM_SW_RST1				(1 << 4)
+
+/* PM_WKEN_MDM */
+/* 2430 only */
+#define OMAP2430_PM_WKEN_MDM_EN_MDM			(1 << 0)
+
+/* PM_WKST_MDM specific bits */
+/* 2430 only */
+
+/* PM_WKDEP_MDM specific bits */
+/* 2430 only */
+
+/* PM_PWSTCTRL_MDM specific bits */
+/* 2430 only */
+#define OMAP2430_KILLDOMAINWKUP				(1 << 19)
+
+/* PM_PWSTST_MDM specific bits */
+/* 2430 only */
+
+/* PRCM_IRQSTATUS_IVA */
+/* 2420 only */
+
+/* PRCM_IRQENABLE_IVA */
+/* 2420 only */
+
+#endif
diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h
new file mode 100644
index 0000000..b4686bc
--- /dev/null
+++ b/arch/arm/mach-omap2/prm-regbits-34xx.h
@@ -0,0 +1,582 @@
+#ifndef __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_34XX_H
+#define __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_34XX_H
+
+/*
+ * OMAP3430 Power/Reset Management register bits
+ *
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "prm.h"
+
+/* Shared register bits */
+
+/* PRM_VC_CMD_VAL_0, PRM_VC_CMD_VAL_1 shared bits */
+#define OMAP3430_ON_SHIFT				24
+#define OMAP3430_ON_MASK				(0xff << 24)
+#define OMAP3430_ONLP_SHIFT				16
+#define OMAP3430_ONLP_MASK				(0xff << 16)
+#define OMAP3430_RET_SHIFT				8
+#define OMAP3430_RET_MASK				(0xff << 8)
+#define OMAP3430_OFF_SHIFT				0
+#define OMAP3430_OFF_MASK				(0xff << 0)
+
+/* PRM_VP1_CONFIG, PRM_VP2_CONFIG shared bits */
+#define OMAP3430_ERROROFFSET_SHIFT			24
+#define OMAP3430_ERROROFFSET_MASK			(0xff << 24)
+#define OMAP3430_ERRORGAIN_SHIFT			16
+#define OMAP3430_ERRORGAIN_MASK				(0xff << 16)
+#define OMAP3430_INITVOLTAGE_SHIFT			8
+#define OMAP3430_INITVOLTAGE_MASK			(0xff << 8)
+#define OMAP3430_TIMEOUTEN				(1 << 3)
+#define OMAP3430_INITVDD				(1 << 2)
+#define OMAP3430_FORCEUPDATE				(1 << 1)
+#define OMAP3430_VPENABLE				(1 << 0)
+
+/* PRM_VP1_VSTEPMIN, PRM_VP2_VSTEPMIN shared bits */
+#define OMAP3430_SMPSWAITTIMEMIN_SHIFT			8
+#define OMAP3430_SMPSWAITTIMEMIN_MASK			(0xffff << 8)
+#define OMAP3430_VSTEPMIN_SHIFT				0
+#define OMAP3430_VSTEPMIN_MASK				(0xff << 0)
+
+/* PRM_VP1_VSTEPMAX, PRM_VP2_VSTEPMAX shared bits */
+#define OMAP3430_SMPSWAITTIMEMAX_SHIFT			8
+#define OMAP3430_SMPSWAITTIMEMAX_MASK			(0xffff << 8)
+#define OMAP3430_VSTEPMAX_SHIFT				0
+#define OMAP3430_VSTEPMAX_MASK				(0xff << 0)
+
+/* PRM_VP1_VLIMITTO, PRM_VP2_VLIMITTO shared bits */
+#define OMAP3430_VDDMAX_SHIFT				24
+#define OMAP3430_VDDMAX_MASK				(0xff << 24)
+#define OMAP3430_VDDMIN_SHIFT				16
+#define OMAP3430_VDDMIN_MASK				(0xff << 16)
+#define OMAP3430_TIMEOUT_SHIFT				0
+#define OMAP3430_TIMEOUT_MASK				(0xffff << 0)
+
+/* PRM_VP1_VOLTAGE, PRM_VP2_VOLTAGE shared bits */
+#define OMAP3430_VPVOLTAGE_SHIFT			0
+#define OMAP3430_VPVOLTAGE_MASK				(0xff << 0)
+
+/* PRM_VP1_STATUS, PRM_VP2_STATUS shared bits */
+#define OMAP3430_VPINIDLE				(1 << 0)
+
+/* PM_WKDEP_IVA2, PM_WKDEP_MPU shared bits */
+#define OMAP3430_EN_PER					(1 << 7)
+
+/* PM_PWSTCTRL_IVA2, PM_PWSTCTRL_MPU, PM_PWSTCTRL_CORE shared bits */
+#define OMAP3430_MEMORYCHANGE				(1 << 3)
+
+/* PM_PWSTST_IVA2, PM_PWSTST_CORE shared bits */
+#define OMAP3430_LOGICSTATEST				(1 << 2)
+
+/* PM_PREPWSTST_IVA2, PM_PREPWSTST_CORE shared bits */
+#define OMAP3430_LASTLOGICSTATEENTERED				(1 << 2)
+
+/*
+ * PM_PREPWSTST_IVA2, PM_PREPWSTST_MPU, PM_PREPWSTST_CORE,
+ * PM_PREPWSTST_GFX, PM_PREPWSTST_DSS, PM_PREPWSTST_CAM,
+ * PM_PREPWSTST_PER, PM_PREPWSTST_NEON shared bits
+ */
+#define OMAP3430_LASTPOWERSTATEENTERED_SHIFT			0
+#define OMAP3430_LASTPOWERSTATEENTERED_MASK			(0x3 << 0)
+
+/* PRM_IRQSTATUS_IVA2, PRM_IRQSTATUS_MPU shared bits */
+#define OMAP3430_WKUP_ST				(1 << 0)
+
+/* PRM_IRQENABLE_IVA2, PRM_IRQENABLE_MPU shared bits */
+#define OMAP3430_WKUP_EN					(1 << 0)
+
+/* PM_MPUGRPSEL1_CORE, PM_IVA2GRPSEL1_CORE shared bits */
+#define OMAP3430_GRPSEL_MMC2				(1 << 25)
+#define OMAP3430_GRPSEL_MMC1				(1 << 24)
+#define OMAP3430_GRPSEL_MCSPI4				(1 << 21)
+#define OMAP3430_GRPSEL_MCSPI3				(1 << 20)
+#define OMAP3430_GRPSEL_MCSPI2				(1 << 19)
+#define OMAP3430_GRPSEL_MCSPI1				(1 << 18)
+#define OMAP3430_GRPSEL_I2C3				(1 << 17)
+#define OMAP3430_GRPSEL_I2C2				(1 << 16)
+#define OMAP3430_GRPSEL_I2C1				(1 << 15)
+#define OMAP3430_GRPSEL_UART2				(1 << 14)
+#define OMAP3430_GRPSEL_UART1				(1 << 13)
+#define OMAP3430_GRPSEL_GPT11				(1 << 12)
+#define OMAP3430_GRPSEL_GPT10				(1 << 11)
+#define OMAP3430_GRPSEL_MCBSP5				(1 << 10)
+#define OMAP3430_GRPSEL_MCBSP1				(1 << 9)
+#define OMAP3430_GRPSEL_HSOTGUSB			(1 << 4)
+#define OMAP3430_GRPSEL_D2D				(1 << 3)
+
+/*
+ * PM_PWSTCTRL_GFX, PM_PWSTCTRL_DSS, PM_PWSTCTRL_CAM,
+ * PM_PWSTCTRL_PER shared bits
+ */
+#define OMAP3430_MEMONSTATE_SHIFT			16
+#define OMAP3430_MEMONSTATE_MASK			(0x3 << 16)
+#define OMAP3430_MEMRETSTATE				(1 << 8)
+
+/* PM_MPUGRPSEL_PER, PM_IVA2GRPSEL_PER shared bits */
+#define OMAP3430_GRPSEL_GPIO6				(1 << 17)
+#define OMAP3430_GRPSEL_GPIO5				(1 << 16)
+#define OMAP3430_GRPSEL_GPIO4				(1 << 15)
+#define OMAP3430_GRPSEL_GPIO3				(1 << 14)
+#define OMAP3430_GRPSEL_GPIO2				(1 << 13)
+#define OMAP3430_GRPSEL_UART3				(1 << 11)
+#define OMAP3430_GRPSEL_GPT9				(1 << 10)
+#define OMAP3430_GRPSEL_GPT8				(1 << 9)
+#define OMAP3430_GRPSEL_GPT7				(1 << 8)
+#define OMAP3430_GRPSEL_GPT6				(1 << 7)
+#define OMAP3430_GRPSEL_GPT5				(1 << 6)
+#define OMAP3430_GRPSEL_GPT4				(1 << 5)
+#define OMAP3430_GRPSEL_GPT3				(1 << 4)
+#define OMAP3430_GRPSEL_GPT2				(1 << 3)
+#define OMAP3430_GRPSEL_MCBSP4				(1 << 2)
+#define OMAP3430_GRPSEL_MCBSP3				(1 << 1)
+#define OMAP3430_GRPSEL_MCBSP2				(1 << 0)
+
+/* PM_MPUGRPSEL_WKUP, PM_IVA2GRPSEL_WKUP shared bits */
+#define OMAP3430_GRPSEL_IO				(1 << 8)
+#define OMAP3430_GRPSEL_SR2				(1 << 7)
+#define OMAP3430_GRPSEL_SR1				(1 << 6)
+#define OMAP3430_GRPSEL_GPIO1				(1 << 3)
+#define OMAP3430_GRPSEL_GPT12				(1 << 1)
+#define OMAP3430_GRPSEL_GPT1				(1 << 0)
+
+/* Bits specific to each register */
+
+/* RM_RSTCTRL_IVA2 */
+#define OMAP3430_RST3_IVA2				(1 << 2)
+#define OMAP3430_RST2_IVA2				(1 << 1)
+#define OMAP3430_RST1_IVA2				(1 << 0)
+
+/* RM_RSTST_IVA2 specific bits */
+#define OMAP3430_EMULATION_VSEQ_RST			(1 << 13)
+#define OMAP3430_EMULATION_VHWA_RST			(1 << 12)
+#define OMAP3430_EMULATION_IVA2_RST			(1 << 11)
+#define OMAP3430_IVA2_SW_RST3				(1 << 10)
+#define OMAP3430_IVA2_SW_RST2				(1 << 9)
+#define OMAP3430_IVA2_SW_RST1				(1 << 8)
+
+/* PM_WKDEP_IVA2 specific bits */
+
+/* PM_PWSTCTRL_IVA2 specific bits */
+#define OMAP3430_L2FLATMEMONSTATE_SHIFT			22
+#define OMAP3430_L2FLATMEMONSTATE_MASK			(0x3 << 22)
+#define OMAP3430_SHAREDL2CACHEFLATONSTATE_SHIFT		20
+#define OMAP3430_SHAREDL2CACHEFLATONSTATE_MASK		(0x3 << 20)
+#define OMAP3430_L1FLATMEMONSTATE_SHIFT			18
+#define OMAP3430_L1FLATMEMONSTATE_MASK			(0x3 << 18)
+#define OMAP3430_SHAREDL1CACHEFLATONSTATE_SHIFT		16
+#define OMAP3430_SHAREDL1CACHEFLATONSTATE_MASK		(0x3 << 16)
+#define OMAP3430_L2FLATMEMRETSTATE			(1 << 11)
+#define OMAP3430_SHAREDL2CACHEFLATRETSTATE		(1 << 10)
+#define OMAP3430_L1FLATMEMRETSTATE			(1 << 9)
+#define OMAP3430_SHAREDL1CACHEFLATRETSTATE		(1 << 8)
+
+/* PM_PWSTST_IVA2 specific bits */
+#define OMAP3430_L2FLATMEMSTATEST_SHIFT			10
+#define OMAP3430_L2FLATMEMSTATEST_MASK			(0x3 << 10)
+#define OMAP3430_SHAREDL2CACHEFLATSTATEST_SHIFT		8
+#define OMAP3430_SHAREDL2CACHEFLATSTATEST_MASK		(0x3 << 8)
+#define OMAP3430_L1FLATMEMSTATEST_SHIFT			6
+#define OMAP3430_L1FLATMEMSTATEST_MASK			(0x3 << 6)
+#define OMAP3430_SHAREDL1CACHEFLATSTATEST_SHIFT		4
+#define OMAP3430_SHAREDL1CACHEFLATSTATEST_MASK		(0x3 << 4)
+
+/* PM_PREPWSTST_IVA2 specific bits */
+#define OMAP3430_LASTL2FLATMEMSTATEENTERED_SHIFT		10
+#define OMAP3430_LASTL2FLATMEMSTATEENTERED_MASK			(0x3 << 10)
+#define OMAP3430_LASTSHAREDL2CACHEFLATSTATEENTERED_SHIFT	8
+#define OMAP3430_LASTSHAREDL2CACHEFLATSTATEENTERED_MASK		(0x3 << 8)
+#define OMAP3430_LASTL1FLATMEMSTATEENTERED_SHIFT		6
+#define OMAP3430_LASTL1FLATMEMSTATEENTERED_MASK			(0x3 << 6)
+#define OMAP3430_LASTSHAREDL1CACHEFLATSTATEENTERED_SHIFT	4
+#define OMAP3430_LASTSHAREDL1CACHEFLATSTATEENTERED_MASK		(0x3 << 4)
+
+/* PRM_IRQSTATUS_IVA2 specific bits */
+#define OMAP3430_PRM_IRQSTATUS_IVA2_IVA2_DPLL_ST	(1 << 2)
+#define OMAP3430_FORCEWKUP_ST				(1 << 1)
+
+/* PRM_IRQENABLE_IVA2 specific bits */
+#define OMAP3430_PRM_IRQENABLE_IVA2_IVA2_DPLL_RECAL_EN		(1 << 2)
+#define OMAP3430_FORCEWKUP_EN					(1 << 1)
+
+/* PRM_REVISION specific bits */
+
+/* PRM_SYSCONFIG specific bits */
+
+/* PRM_IRQSTATUS_MPU specific bits */
+#define OMAP3430ES2_SND_PERIPH_DPLL_ST_SHIFT		25
+#define OMAP3430ES2_SND_PERIPH_DPLL_ST			(1 << 25)
+#define OMAP3430_VC_TIMEOUTERR_ST			(1 << 24)
+#define OMAP3430_VC_RAERR_ST				(1 << 23)
+#define OMAP3430_VC_SAERR_ST				(1 << 22)
+#define OMAP3430_VP2_TRANXDONE_ST			(1 << 21)
+#define OMAP3430_VP2_EQVALUE_ST				(1 << 20)
+#define OMAP3430_VP2_NOSMPSACK_ST			(1 << 19)
+#define OMAP3430_VP2_MAXVDD_ST				(1 << 18)
+#define OMAP3430_VP2_MINVDD_ST				(1 << 17)
+#define OMAP3430_VP2_OPPCHANGEDONE_ST			(1 << 16)
+#define OMAP3430_VP1_TRANXDONE_ST			(1 << 15)
+#define OMAP3430_VP1_EQVALUE_ST				(1 << 14)
+#define OMAP3430_VP1_NOSMPSACK_ST			(1 << 13)
+#define OMAP3430_VP1_MAXVDD_ST				(1 << 12)
+#define OMAP3430_VP1_MINVDD_ST				(1 << 11)
+#define OMAP3430_VP1_OPPCHANGEDONE_ST			(1 << 10)
+#define OMAP3430_IO_ST					(1 << 9)
+#define OMAP3430_PRM_IRQSTATUS_MPU_IVA2_DPLL_ST		(1 << 8)
+#define OMAP3430_PRM_IRQSTATUS_MPU_IVA2_DPLL_ST_SHIFT	8
+#define OMAP3430_MPU_DPLL_ST				(1 << 7)
+#define OMAP3430_MPU_DPLL_ST_SHIFT			7
+#define OMAP3430_PERIPH_DPLL_ST				(1 << 6)
+#define OMAP3430_PERIPH_DPLL_ST_SHIFT			6
+#define OMAP3430_CORE_DPLL_ST				(1 << 5)
+#define OMAP3430_CORE_DPLL_ST_SHIFT			5
+#define OMAP3430_TRANSITION_ST				(1 << 4)
+#define OMAP3430_EVGENOFF_ST				(1 << 3)
+#define OMAP3430_EVGENON_ST				(1 << 2)
+#define OMAP3430_FS_USB_WKUP_ST				(1 << 1)
+
+/* PRM_IRQENABLE_MPU specific bits */
+#define OMAP3430ES2_SND_PERIPH_DPLL_RECAL_EN_SHIFT		25
+#define OMAP3430ES2_SND_PERIPH_DPLL_RECAL_EN			(1 << 25)
+#define OMAP3430_VC_TIMEOUTERR_EN				(1 << 24)
+#define OMAP3430_VC_RAERR_EN					(1 << 23)
+#define OMAP3430_VC_SAERR_EN					(1 << 22)
+#define OMAP3430_VP2_TRANXDONE_EN				(1 << 21)
+#define OMAP3430_VP2_EQVALUE_EN					(1 << 20)
+#define OMAP3430_VP2_NOSMPSACK_EN				(1 << 19)
+#define OMAP3430_VP2_MAXVDD_EN					(1 << 18)
+#define OMAP3430_VP2_MINVDD_EN					(1 << 17)
+#define OMAP3430_VP2_OPPCHANGEDONE_EN				(1 << 16)
+#define OMAP3430_VP1_TRANXDONE_EN				(1 << 15)
+#define OMAP3430_VP1_EQVALUE_EN					(1 << 14)
+#define OMAP3430_VP1_NOSMPSACK_EN				(1 << 13)
+#define OMAP3430_VP1_MAXVDD_EN					(1 << 12)
+#define OMAP3430_VP1_MINVDD_EN					(1 << 11)
+#define OMAP3430_VP1_OPPCHANGEDONE_EN				(1 << 10)
+#define OMAP3430_IO_EN						(1 << 9)
+#define OMAP3430_PRM_IRQENABLE_MPU_IVA2_DPLL_RECAL_EN		(1 << 8)
+#define OMAP3430_PRM_IRQENABLE_MPU_IVA2_DPLL_RECAL_EN_SHIFT	8
+#define OMAP3430_MPU_DPLL_RECAL_EN				(1 << 7)
+#define OMAP3430_MPU_DPLL_RECAL_EN_SHIFT			7
+#define OMAP3430_PERIPH_DPLL_RECAL_EN				(1 << 6)
+#define OMAP3430_PERIPH_DPLL_RECAL_EN_SHIFT			6
+#define OMAP3430_CORE_DPLL_RECAL_EN				(1 << 5)
+#define OMAP3430_CORE_DPLL_RECAL_EN_SHIFT			5
+#define OMAP3430_TRANSITION_EN					(1 << 4)
+#define OMAP3430_EVGENOFF_EN					(1 << 3)
+#define OMAP3430_EVGENON_EN					(1 << 2)
+#define OMAP3430_FS_USB_WKUP_EN					(1 << 1)
+
+/* RM_RSTST_MPU specific bits */
+#define OMAP3430_EMULATION_MPU_RST			(1 << 11)
+
+/* PM_WKDEP_MPU specific bits */
+#define OMAP3430_PM_WKDEP_MPU_EN_DSS			(1 << 5)
+#define OMAP3430_PM_WKDEP_MPU_EN_IVA2			(1 << 2)
+
+/* PM_EVGENCTRL_MPU */
+#define OMAP3430_OFFLOADMODE_SHIFT			3
+#define OMAP3430_OFFLOADMODE_MASK			(0x3 << 3)
+#define OMAP3430_ONLOADMODE_SHIFT			1
+#define OMAP3430_ONLOADMODE_MASK			(0x3 << 1)
+#define OMAP3430_ENABLE					(1 << 0)
+
+/* PM_EVGENONTIM_MPU */
+#define OMAP3430_ONTIMEVAL_SHIFT			0
+#define OMAP3430_ONTIMEVAL_MASK				(0xffffffff << 0)
+
+/* PM_EVGENOFFTIM_MPU */
+#define OMAP3430_OFFTIMEVAL_SHIFT			0
+#define OMAP3430_OFFTIMEVAL_MASK			(0xffffffff << 0)
+
+/* PM_PWSTCTRL_MPU specific bits */
+#define OMAP3430_L2CACHEONSTATE_SHIFT			16
+#define OMAP3430_L2CACHEONSTATE_MASK			(0x3 << 16)
+#define OMAP3430_L2CACHERETSTATE			(1 << 8)
+#define OMAP3430_LOGICL1CACHERETSTATE			(1 << 2)
+
+/* PM_PWSTST_MPU specific bits */
+#define OMAP3430_L2CACHESTATEST_SHIFT			6
+#define OMAP3430_L2CACHESTATEST_MASK			(0x3 << 6)
+#define OMAP3430_LOGICL1CACHESTATEST			(1 << 2)
+
+/* PM_PREPWSTST_MPU specific bits */
+#define OMAP3430_LASTL2CACHESTATEENTERED_SHIFT		6
+#define OMAP3430_LASTL2CACHESTATEENTERED_MASK		(0x3 << 6)
+#define OMAP3430_LASTLOGICL1CACHESTATEENTERED		(1 << 2)
+
+/* RM_RSTCTRL_CORE */
+#define OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON		(1 << 1)
+#define OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST			(1 << 0)
+
+/* RM_RSTST_CORE specific bits */
+#define OMAP3430_MODEM_SECURITY_VIOL_RST		(1 << 10)
+#define OMAP3430_RM_RSTST_CORE_MODEM_SW_RSTPWRON	(1 << 9)
+#define OMAP3430_RM_RSTST_CORE_MODEM_SW_RST		(1 << 8)
+
+/* PM_WKEN1_CORE specific bits */
+
+/* PM_MPUGRPSEL1_CORE specific bits */
+#define OMAP3430_GRPSEL_FSHOSTUSB			(1 << 5)
+
+/* PM_IVA2GRPSEL1_CORE specific bits */
+
+/* PM_WKST1_CORE specific bits */
+
+/* PM_PWSTCTRL_CORE specific bits */
+#define OMAP3430_MEM2ONSTATE_SHIFT			18
+#define OMAP3430_MEM2ONSTATE_MASK			(0x3 << 18)
+#define OMAP3430_MEM1ONSTATE_SHIFT			16
+#define OMAP3430_MEM1ONSTATE_MASK			(0x3 << 16)
+#define OMAP3430_MEM2RETSTATE				(1 << 9)
+#define OMAP3430_MEM1RETSTATE				(1 << 8)
+
+/* PM_PWSTST_CORE specific bits */
+#define OMAP3430_MEM2STATEST_SHIFT			6
+#define OMAP3430_MEM2STATEST_MASK			(0x3 << 6)
+#define OMAP3430_MEM1STATEST_SHIFT			4
+#define OMAP3430_MEM1STATEST_MASK			(0x3 << 4)
+
+/* PM_PREPWSTST_CORE specific bits */
+#define OMAP3430_LASTMEM2STATEENTERED_SHIFT		6
+#define OMAP3430_LASTMEM2STATEENTERED_MASK		(0x3 << 6)
+#define OMAP3430_LASTMEM1STATEENTERED_SHIFT		4
+#define OMAP3430_LASTMEM1STATEENTERED_MASK		(0x3 << 4)
+
+/* RM_RSTST_GFX specific bits */
+
+/* PM_WKDEP_GFX specific bits */
+#define OMAP3430_PM_WKDEP_GFX_EN_IVA2			(1 << 2)
+
+/* PM_PWSTCTRL_GFX specific bits */
+
+/* PM_PWSTST_GFX specific bits */
+
+/* PM_PREPWSTST_GFX specific bits */
+
+/* PM_WKEN_WKUP specific bits */
+#define OMAP3430_EN_IO					(1 << 8)
+
+/* PM_MPUGRPSEL_WKUP specific bits */
+
+/* PM_IVA2GRPSEL_WKUP specific bits */
+
+/* PM_WKST_WKUP specific bits */
+#define OMAP3430_ST_IO					(1 << 8)
+
+/* PRM_CLKSEL */
+#define OMAP3430_SYS_CLKIN_SEL_SHIFT			0
+#define OMAP3430_SYS_CLKIN_SEL_MASK			(0x7 << 0)
+
+/* PRM_CLKOUT_CTRL */
+#define OMAP3430_CLKOUT_EN				(1 << 7)
+#define OMAP3430_CLKOUT_EN_SHIFT			7
+
+/* RM_RSTST_DSS specific bits */
+
+/* PM_WKEN_DSS */
+#define OMAP3430_PM_WKEN_DSS_EN_DSS			(1 << 0)
+
+/* PM_WKDEP_DSS specific bits */
+#define OMAP3430_PM_WKDEP_DSS_EN_IVA2			(1 << 2)
+
+/* PM_PWSTCTRL_DSS specific bits */
+
+/* PM_PWSTST_DSS specific bits */
+
+/* PM_PREPWSTST_DSS specific bits */
+
+/* RM_RSTST_CAM specific bits */
+
+/* PM_WKDEP_CAM specific bits */
+#define OMAP3430_PM_WKDEP_CAM_EN_IVA2			(1 << 2)
+
+/* PM_PWSTCTRL_CAM specific bits */
+
+/* PM_PWSTST_CAM specific bits */
+
+/* PM_PREPWSTST_CAM specific bits */
+
+/* PM_PWSTCTRL_USBHOST specific bits */
+#define OMAP3430ES2_SAVEANDRESTORE_SHIFT		(1 << 4)
+
+/* RM_RSTST_PER specific bits */
+
+/* PM_WKEN_PER specific bits */
+
+/* PM_MPUGRPSEL_PER specific bits */
+
+/* PM_IVA2GRPSEL_PER specific bits */
+
+/* PM_WKST_PER specific bits */
+
+/* PM_WKDEP_PER specific bits */
+#define OMAP3430_PM_WKDEP_PER_EN_IVA2			(1 << 2)
+
+/* PM_PWSTCTRL_PER specific bits */
+
+/* PM_PWSTST_PER specific bits */
+
+/* PM_PREPWSTST_PER specific bits */
+
+/* RM_RSTST_EMU specific bits */
+
+/* PM_PWSTST_EMU specific bits */
+
+/* PRM_VC_SMPS_SA */
+#define OMAP3430_PRM_VC_SMPS_SA_SA1_SHIFT		16
+#define OMAP3430_PRM_VC_SMPS_SA_SA1_MASK		(0x7f << 16)
+#define OMAP3430_PRM_VC_SMPS_SA_SA0_SHIFT		0
+#define OMAP3430_PRM_VC_SMPS_SA_SA0_MASK		(0x7f << 0)
+
+/* PRM_VC_SMPS_VOL_RA */
+#define OMAP3430_VOLRA1_SHIFT				16
+#define OMAP3430_VOLRA1_MASK				(0xff << 16)
+#define OMAP3430_VOLRA0_SHIFT				0
+#define OMAP3430_VOLRA0_MASK				(0xff << 0)
+
+/* PRM_VC_SMPS_CMD_RA */
+#define OMAP3430_CMDRA1_SHIFT				16
+#define OMAP3430_CMDRA1_MASK				(0xff << 16)
+#define OMAP3430_CMDRA0_SHIFT				0
+#define OMAP3430_CMDRA0_MASK				(0xff << 0)
+
+/* PRM_VC_CMD_VAL_0 specific bits */
+
+/* PRM_VC_CMD_VAL_1 specific bits */
+
+/* PRM_VC_CH_CONF */
+#define OMAP3430_CMD1					(1 << 20)
+#define OMAP3430_RACEN1					(1 << 19)
+#define OMAP3430_RAC1					(1 << 18)
+#define OMAP3430_RAV1					(1 << 17)
+#define OMAP3430_PRM_VC_CH_CONF_SA1			(1 << 16)
+#define OMAP3430_CMD0					(1 << 4)
+#define OMAP3430_RACEN0					(1 << 3)
+#define OMAP3430_RAC0					(1 << 2)
+#define OMAP3430_RAV0					(1 << 1)
+#define OMAP3430_PRM_VC_CH_CONF_SA0			(1 << 0)
+
+/* PRM_VC_I2C_CFG */
+#define OMAP3430_HSMASTER				(1 << 5)
+#define OMAP3430_SREN					(1 << 4)
+#define OMAP3430_HSEN					(1 << 3)
+#define OMAP3430_MCODE_SHIFT				0
+#define OMAP3430_MCODE_MASK				(0x7 << 0)
+
+/* PRM_VC_BYPASS_VAL */
+#define OMAP3430_VALID					(1 << 24)
+#define OMAP3430_DATA_SHIFT				16
+#define OMAP3430_DATA_MASK				(0xff << 16)
+#define OMAP3430_REGADDR_SHIFT				8
+#define OMAP3430_REGADDR_MASK				(0xff << 8)
+#define OMAP3430_SLAVEADDR_SHIFT			0
+#define OMAP3430_SLAVEADDR_MASK				(0x7f << 0)
+
+/* PRM_RSTCTRL */
+#define OMAP3430_RST_DPLL3				(1 << 2)
+#define OMAP3430_RST_GS					(1 << 1)
+
+/* PRM_RSTTIME */
+#define OMAP3430_RSTTIME2_SHIFT				8
+#define OMAP3430_RSTTIME2_MASK				(0x1f << 8)
+#define OMAP3430_RSTTIME1_SHIFT				0
+#define OMAP3430_RSTTIME1_MASK				(0xff << 0)
+
+/* PRM_RSTST */
+#define OMAP3430_ICECRUSHER_RST				(1 << 10)
+#define OMAP3430_ICEPICK_RST				(1 << 9)
+#define OMAP3430_VDD2_VOLTAGE_MANAGER_RST		(1 << 8)
+#define OMAP3430_VDD1_VOLTAGE_MANAGER_RST		(1 << 7)
+#define OMAP3430_EXTERNAL_WARM_RST			(1 << 6)
+#define OMAP3430_SECURE_WD_RST				(1 << 5)
+#define OMAP3430_MPU_WD_RST				(1 << 4)
+#define OMAP3430_SECURITY_VIOL_RST			(1 << 3)
+#define OMAP3430_GLOBAL_SW_RST				(1 << 1)
+#define OMAP3430_GLOBAL_COLD_RST			(1 << 0)
+
+/* PRM_VOLTCTRL */
+#define OMAP3430_SEL_VMODE				(1 << 4)
+#define OMAP3430_SEL_OFF				(1 << 3)
+#define OMAP3430_AUTO_OFF				(1 << 2)
+#define OMAP3430_AUTO_RET				(1 << 1)
+#define OMAP3430_AUTO_SLEEP				(1 << 0)
+
+/* PRM_SRAM_PCHARGE */
+#define OMAP3430_PCHARGE_TIME_SHIFT			0
+#define OMAP3430_PCHARGE_TIME_MASK			(0xff << 0)
+
+/* PRM_CLKSRC_CTRL */
+#define OMAP3430_SYSCLKDIV_SHIFT			6
+#define OMAP3430_SYSCLKDIV_MASK				(0x3 << 6)
+#define OMAP3430_AUTOEXTCLKMODE_SHIFT			3
+#define OMAP3430_AUTOEXTCLKMODE_MASK			(0x3 << 3)
+#define OMAP3430_SYSCLKSEL_SHIFT			0
+#define OMAP3430_SYSCLKSEL_MASK				(0x3 << 0)
+
+/* PRM_VOLTSETUP1 */
+#define OMAP3430_SETUP_TIME2_SHIFT			16
+#define OMAP3430_SETUP_TIME2_MASK			(0xffff << 16)
+#define OMAP3430_SETUP_TIME1_SHIFT			0
+#define OMAP3430_SETUP_TIME1_MASK			(0xffff << 0)
+
+/* PRM_VOLTOFFSET */
+#define OMAP3430_OFFSET_TIME_SHIFT			0
+#define OMAP3430_OFFSET_TIME_MASK			(0xffff << 0)
+
+/* PRM_CLKSETUP */
+#define OMAP3430_SETUP_TIME_SHIFT			0
+#define OMAP3430_SETUP_TIME_MASK			(0xffff << 0)
+
+/* PRM_POLCTRL */
+#define OMAP3430_OFFMODE_POL				(1 << 3)
+#define OMAP3430_CLKOUT_POL				(1 << 2)
+#define OMAP3430_CLKREQ_POL				(1 << 1)
+#define OMAP3430_EXTVOL_POL				(1 << 0)
+
+/* PRM_VOLTSETUP2 */
+#define OMAP3430_OFFMODESETUPTIME_SHIFT			0
+#define OMAP3430_OFFMODESETUPTIME_MASK			(0xffff << 0)
+
+/* PRM_VP1_CONFIG specific bits */
+
+/* PRM_VP1_VSTEPMIN specific bits */
+
+/* PRM_VP1_VSTEPMAX specific bits */
+
+/* PRM_VP1_VLIMITTO specific bits */
+
+/* PRM_VP1_VOLTAGE specific bits */
+
+/* PRM_VP1_STATUS specific bits */
+
+/* PRM_VP2_CONFIG specific bits */
+
+/* PRM_VP2_VSTEPMIN specific bits */
+
+/* PRM_VP2_VSTEPMAX specific bits */
+
+/* PRM_VP2_VLIMITTO specific bits */
+
+/* PRM_VP2_VOLTAGE specific bits */
+
+/* PRM_VP2_STATUS specific bits */
+
+/* RM_RSTST_NEON specific bits */
+
+/* PM_WKDEP_NEON specific bits */
+
+/* PM_PWSTCTRL_NEON specific bits */
+
+/* PM_PWSTST_NEON specific bits */
+
+/* PM_PREPWSTST_NEON specific bits */
+
+#endif
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
new file mode 100644
index 0000000..ab7649af
--- /dev/null
+++ b/arch/arm/mach-omap2/prm.h
@@ -0,0 +1,316 @@
+#ifndef __ARCH_ARM_MACH_OMAP2_PRM_H
+#define __ARCH_ARM_MACH_OMAP2_PRM_H
+
+/*
+ * OMAP2/3 Power/Reset Management (PRM) register definitions
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Copyright (C) 2007 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "prcm-common.h"
+
+#ifndef __ASSEMBLER__
+#define OMAP_PRM_REGADDR(module, reg)					\
+	(void __iomem *)IO_ADDRESS(OMAP2_PRM_BASE + (module) + (reg))
+#else
+#define OMAP2420_PRM_REGADDR(module, reg)				\
+			IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
+#define OMAP2430_PRM_REGADDR(module, reg)				\
+			IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
+#define OMAP34XX_PRM_REGADDR(module, reg)				\
+			IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
+#endif
+
+/*
+ * Architecture-specific global PRM registers
+ * Use prm_{read,write}_reg() with these registers.
+ *
+ * With a few exceptions, these are the register names beginning with
+ * PRCM_* on 24xx, and PRM_* on 34xx.  (The exceptions are the
+ * IRQSTATUS and IRQENABLE bits.)
+ *
+ */
+
+#define OMAP24XX_PRCM_REVISION		OMAP_PRM_REGADDR(OCP_MOD, 0x0000)
+#define OMAP24XX_PRCM_SYSCONFIG		OMAP_PRM_REGADDR(OCP_MOD, 0x0010)
+
+#define OMAP24XX_PRCM_IRQSTATUS_MPU	OMAP_PRM_REGADDR(OCP_MOD, 0x0018)
+#define OMAP24XX_PRCM_IRQENABLE_MPU	OMAP_PRM_REGADDR(OCP_MOD, 0x001c)
+
+#define OMAP24XX_PRCM_VOLTCTRL		OMAP_PRM_REGADDR(OCP_MOD, 0x0050)
+#define OMAP24XX_PRCM_VOLTST		OMAP_PRM_REGADDR(OCP_MOD, 0x0054)
+#define OMAP24XX_PRCM_CLKSRC_CTRL	OMAP_PRM_REGADDR(OCP_MOD, 0x0060)
+#define OMAP24XX_PRCM_CLKOUT_CTRL	OMAP_PRM_REGADDR(OCP_MOD, 0x0070)
+#define OMAP24XX_PRCM_CLKEMUL_CTRL	OMAP_PRM_REGADDR(OCP_MOD, 0x0078)
+#define OMAP24XX_PRCM_CLKCFG_CTRL	OMAP_PRM_REGADDR(OCP_MOD, 0x0080)
+#define OMAP24XX_PRCM_CLKCFG_STATUS	OMAP_PRM_REGADDR(OCP_MOD, 0x0084)
+#define OMAP24XX_PRCM_VOLTSETUP		OMAP_PRM_REGADDR(OCP_MOD, 0x0090)
+#define OMAP24XX_PRCM_CLKSSETUP		OMAP_PRM_REGADDR(OCP_MOD, 0x0094)
+#define OMAP24XX_PRCM_POLCTRL		OMAP_PRM_REGADDR(OCP_MOD, 0x0098)
+
+#define OMAP3430_PRM_REVISION		OMAP_PRM_REGADDR(OCP_MOD, 0x0004)
+#define OMAP3430_PRM_SYSCONFIG		OMAP_PRM_REGADDR(OCP_MOD, 0x0014)
+
+#define OMAP3430_PRM_IRQSTATUS_MPU	OMAP_PRM_REGADDR(OCP_MOD, 0x0018)
+#define OMAP3430_PRM_IRQENABLE_MPU	OMAP_PRM_REGADDR(OCP_MOD, 0x001c)
+
+
+#define OMAP3430_PRM_VC_SMPS_SA		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0020)
+#define OMAP3430_PRM_VC_SMPS_VOL_RA	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0024)
+#define OMAP3430_PRM_VC_SMPS_CMD_RA	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0028)
+#define OMAP3430_PRM_VC_CMD_VAL_0	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x002c)
+#define OMAP3430_PRM_VC_CMD_VAL_1	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0030)
+#define OMAP3430_PRM_VC_CH_CONF		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0034)
+#define OMAP3430_PRM_VC_I2C_CFG		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0038)
+#define OMAP3430_PRM_VC_BYPASS_VAL	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x003c)
+#define OMAP3430_PRM_RSTCTRL		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0050)
+#define OMAP3430_PRM_RSTTIME		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0054)
+#define OMAP3430_PRM_RSTST		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0058)
+#define OMAP3430_PRM_VOLTCTRL		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0060)
+#define OMAP3430_PRM_SRAM_PCHARGE	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0064)
+#define OMAP3430_PRM_CLKSRC_CTRL	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0070)
+#define OMAP3430_PRM_VOLTSETUP1		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0090)
+#define OMAP3430_PRM_VOLTOFFSET		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0094)
+#define OMAP3430_PRM_CLKSETUP		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0098)
+#define OMAP3430_PRM_POLCTRL		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x009c)
+#define OMAP3430_PRM_VOLTSETUP2		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00a0)
+#define OMAP3430_PRM_VP1_CONFIG		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b0)
+#define OMAP3430_PRM_VP1_VSTEPMIN	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b4)
+#define OMAP3430_PRM_VP1_VSTEPMAX	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b8)
+#define OMAP3430_PRM_VP1_VLIMITTO	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00bc)
+#define OMAP3430_PRM_VP1_VOLTAGE	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c0)
+#define OMAP3430_PRM_VP1_STATUS		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c4)
+#define OMAP3430_PRM_VP2_CONFIG		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d0)
+#define OMAP3430_PRM_VP2_VSTEPMIN	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d4)
+#define OMAP3430_PRM_VP2_VSTEPMAX	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d8)
+#define OMAP3430_PRM_VP2_VLIMITTO	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00dc)
+#define OMAP3430_PRM_VP2_VOLTAGE	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e0)
+#define OMAP3430_PRM_VP2_STATUS		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e4)
+
+#define OMAP3430_PRM_CLKSEL		OMAP_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0040)
+#define OMAP3430_PRM_CLKOUT_CTRL	OMAP_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
+
+/*
+ * Module specific PRM registers from PRM_BASE + domain offset
+ *
+ * Use prm_{read,write}_mod_reg() with these registers.
+ *
+ * With a few exceptions, these are the register names beginning with
+ * {PM,RM}_* on both architectures.  (The exceptions are the IRQSTATUS
+ * and IRQENABLE bits.)
+ *
+ */
+
+/* Registers appearing on both 24xx and 34xx */
+
+#define RM_RSTCTRL					0x0050
+#define RM_RSTTIME					0x0054
+#define RM_RSTST					0x0058
+
+#define PM_WKEN						0x00a0
+#define PM_WKEN1					PM_WKEN
+#define PM_WKST						0x00b0
+#define PM_WKST1					PM_WKST
+#define PM_WKDEP					0x00c8
+#define PM_EVGENCTRL					0x00d4
+#define PM_EVGENONTIM					0x00d8
+#define PM_EVGENOFFTIM					0x00dc
+#define PM_PWSTCTRL					0x00e0
+#define PM_PWSTST					0x00e4
+
+#define OMAP3430_PM_MPUGRPSEL				0x00a4
+#define OMAP3430_PM_MPUGRPSEL1				OMAP3430_PM_MPUGRPSEL
+
+#define OMAP3430_PM_IVAGRPSEL				0x00a8
+#define OMAP3430_PM_IVAGRPSEL1				OMAP3430_PM_IVAGRPSEL
+
+#define OMAP3430_PM_PREPWSTST				0x00e8
+
+#define OMAP3430_PRM_IRQSTATUS_IVA2			0x00f8
+#define OMAP3430_PRM_IRQENABLE_IVA2			0x00fc
+
+
+/* Architecture-specific registers */
+
+#define OMAP24XX_PM_WKEN2				0x00a4
+#define OMAP24XX_PM_WKST2				0x00b4
+
+#define OMAP24XX_PRCM_IRQSTATUS_DSP			0x00f0	/* IVA mod */
+#define OMAP24XX_PRCM_IRQENABLE_DSP			0x00f4	/* IVA mod */
+#define OMAP24XX_PRCM_IRQSTATUS_IVA			0x00f8
+#define OMAP24XX_PRCM_IRQENABLE_IVA			0x00fc
+
+#ifndef __ASSEMBLER__
+
+/* Power/reset management domain register get/set */
+
+static inline void prm_write_mod_reg(u32 val, s16 module, s16 idx)
+{
+	__raw_writel(val, OMAP_PRM_REGADDR(module, idx));
+}
+
+static inline u32 prm_read_mod_reg(s16 module, s16 idx)
+{
+	return __raw_readl(OMAP_PRM_REGADDR(module, idx));
+}
+
+#endif
+
+/*
+ * Bits common to specific registers
+ *
+ * The 3430 register and bit names are generally used,
+ * since they tend to make more sense
+ */
+
+/* PM_EVGENONTIM_MPU */
+/* Named PM_EVEGENONTIM_MPU on the 24XX */
+#define OMAP_ONTIMEVAL_SHIFT				0
+#define OMAP_ONTIMEVAL_MASK				(0xffffffff << 0)
+
+/* PM_EVGENOFFTIM_MPU */
+/* Named PM_EVEGENOFFTIM_MPU on the 24XX */
+#define OMAP_OFFTIMEVAL_SHIFT				0
+#define OMAP_OFFTIMEVAL_MASK				(0xffffffff << 0)
+
+/* PRM_CLKSETUP and PRCM_VOLTSETUP */
+/* Named PRCM_CLKSSETUP on the 24XX */
+#define OMAP_SETUP_TIME_SHIFT				0
+#define OMAP_SETUP_TIME_MASK				(0xffff << 0)
+
+/* PRM_CLKSRC_CTRL */
+/* Named PRCM_CLKSRC_CTRL on the 24XX */
+#define OMAP_SYSCLKDIV_SHIFT				6
+#define OMAP_SYSCLKDIV_MASK				(0x3 << 6)
+#define OMAP_AUTOEXTCLKMODE_SHIFT			3
+#define OMAP_AUTOEXTCLKMODE_MASK			(0x3 << 3)
+#define OMAP_SYSCLKSEL_SHIFT				0
+#define OMAP_SYSCLKSEL_MASK				(0x3 << 0)
+
+/* PM_EVGENCTRL_MPU */
+#define OMAP_OFFLOADMODE_SHIFT				3
+#define OMAP_OFFLOADMODE_MASK				(0x3 << 3)
+#define OMAP_ONLOADMODE_SHIFT				1
+#define OMAP_ONLOADMODE_MASK				(0x3 << 1)
+#define OMAP_ENABLE					(1 << 0)
+
+/* PRM_RSTTIME */
+/* Named RM_RSTTIME_WKUP on the 24xx */
+#define OMAP_RSTTIME2_SHIFT				8
+#define OMAP_RSTTIME2_MASK				(0x1f << 8)
+#define OMAP_RSTTIME1_SHIFT				0
+#define OMAP_RSTTIME1_MASK				(0xff << 0)
+
+
+/* PRM_RSTCTRL */
+/* Named RM_RSTCTRL_WKUP on the 24xx */
+/* 2420 calls RST_DPLL3 'RST_DPLL' */
+#define OMAP_RST_DPLL3					(1 << 2)
+#define OMAP_RST_GS					(1 << 1)
+
+
+/*
+ * Bits common to module-shared registers
+ *
+ * Not all registers of a particular type support all of these bits -
+ * check TRM if you are unsure
+ */
+
+/*
+ * 24XX: PM_PWSTST_CORE, PM_PWSTST_GFX, PM_PWSTST_MPU, PM_PWSTST_DSP
+ *
+ * 2430: PM_PWSTST_MDM
+ *
+ * 3430: PM_PWSTST_IVA2, PM_PWSTST_MPU, PM_PWSTST_CORE, PM_PWSTST_GFX,
+ *	 PM_PWSTST_DSS, PM_PWSTST_CAM, PM_PWSTST_PER, PM_PWSTST_EMU,
+ *	 PM_PWSTST_NEON
+ */
+#define OMAP_INTRANSITION				(1 << 20)
+
+
+/*
+ * 24XX: PM_PWSTST_GFX, PM_PWSTST_DSP
+ *
+ * 2430: PM_PWSTST_MDM
+ *
+ * 3430: PM_PWSTST_IVA2, PM_PWSTST_MPU, PM_PWSTST_CORE, PM_PWSTST_GFX,
+ *	 PM_PWSTST_DSS, PM_PWSTST_CAM, PM_PWSTST_PER, PM_PWSTST_EMU,
+ *	 PM_PWSTST_NEON
+ */
+#define OMAP_POWERSTATEST_SHIFT				0
+#define OMAP_POWERSTATEST_MASK				(0x3 << 0)
+
+/*
+ * 24XX: RM_RSTST_MPU and RM_RSTST_DSP - on 24XX, 'COREDOMAINWKUP_RST' is
+ *	 called 'COREWKUP_RST'
+ *
+ * 3430: RM_RSTST_IVA2, RM_RSTST_MPU, RM_RSTST_GFX, RM_RSTST_DSS,
+ *	 RM_RSTST_CAM, RM_RSTST_PER, RM_RSTST_NEON
+ */
+#define OMAP_COREDOMAINWKUP_RST				(1 << 3)
+
+/*
+ * 24XX: RM_RSTST_MPU, RM_RSTST_GFX, RM_RSTST_DSP
+ *
+ * 2430: RM_RSTST_MDM
+ *
+ * 3430: RM_RSTST_CORE, RM_RSTST_EMU
+ */
+#define OMAP_DOMAINWKUP_RST				(1 << 2)
+
+/*
+ * 24XX: RM_RSTST_MPU, RM_RSTST_WKUP, RM_RSTST_DSP
+ *	 On 24XX, 'GLOBALWARM_RST' is called 'GLOBALWMPU_RST'.
+ *
+ * 2430: RM_RSTST_MDM
+ *
+ * 3430: RM_RSTST_CORE, RM_RSTST_EMU
+ */
+#define OMAP_GLOBALWARM_RST				(1 << 1)
+#define OMAP_GLOBALCOLD_RST				(1 << 0)
+
+/*
+ * 24XX: PM_WKDEP_GFX, PM_WKDEP_MPU, PM_WKDEP_CORE, PM_WKDEP_DSP
+ *	 2420 TRM sometimes uses "EN_WAKEUP" instead of "EN_WKUP"
+ *
+ * 2430: PM_WKDEP_MDM
+ *
+ * 3430: PM_WKDEP_IVA2, PM_WKDEP_GFX, PM_WKDEP_DSS, PM_WKDEP_CAM,
+ *	 PM_WKDEP_PER
+ */
+#define OMAP_EN_WKUP					(1 << 4)
+
+/*
+ * 24XX: PM_PWSTCTRL_MPU, PM_PWSTCTRL_CORE, PM_PWSTCTRL_GFX,
+ *	 PM_PWSTCTRL_DSP
+ *
+ * 2430: PM_PWSTCTRL_MDM
+ *
+ * 3430: PM_PWSTCTRL_IVA2, PM_PWSTCTRL_CORE, PM_PWSTCTRL_GFX,
+ *	 PM_PWSTCTRL_DSS, PM_PWSTCTRL_CAM, PM_PWSTCTRL_PER,
+ *	 PM_PWSTCTRL_NEON
+ */
+#define OMAP_LOGICRETSTATE				(1 << 2)
+
+/*
+ * 24XX: PM_PWSTCTRL_MPU, PM_PWSTCTRL_CORE, PM_PWSTCTRL_GFX,
+ *       PM_PWSTCTRL_DSP, PM_PWSTST_MPU
+ *
+ * 2430: PM_PWSTCTRL_MDM shared bits
+ *
+ * 3430: PM_PWSTCTRL_IVA2, PM_PWSTCTRL_MPU, PM_PWSTCTRL_CORE,
+ *	 PM_PWSTCTRL_GFX, PM_PWSTCTRL_DSS, PM_PWSTCTRL_CAM, PM_PWSTCTRL_PER,
+ *	 PM_PWSTCTRL_NEON shared bits
+ */
+#define OMAP_POWERSTATE_SHIFT				0
+#define OMAP_POWERSTATE_MASK				(0x3 << 0)
+
+
+#endif
diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h
new file mode 100644
index 0000000..d7f23bc
--- /dev/null
+++ b/arch/arm/mach-omap2/sdrc.h
@@ -0,0 +1,58 @@
+#ifndef __ARCH_ARM_MACH_OMAP2_SDRC_H
+#define __ARCH_ARM_MACH_OMAP2_SDRC_H
+
+/*
+ * OMAP2 SDRC register definitions
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Copyright (C) 2007 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <asm/arch/sdrc.h>
+
+#ifndef __ASSEMBLER__
+extern unsigned long omap2_sdrc_base;
+extern unsigned long omap2_sms_base;
+
+#define OMAP_SDRC_REGADDR(reg)						\
+		(void __iomem *)IO_ADDRESS(omap2_sdrc_base + (reg))
+#define OMAP_SMS_REGADDR(reg)						\
+		(void __iomem *)IO_ADDRESS(omap2_sms_base + (reg))
+
+/* SDRC global register get/set */
+
+static inline void sdrc_write_reg(u32 val, u16 reg)
+{
+	__raw_writel(val, OMAP_SDRC_REGADDR(reg));
+}
+
+static inline u32 sdrc_read_reg(u16 reg)
+{
+	return __raw_readl(OMAP_SDRC_REGADDR(reg));
+}
+
+/* SMS global register get/set */
+
+static inline void sms_write_reg(u32 val, u16 reg)
+{
+	__raw_writel(val, OMAP_SMS_REGADDR(reg));
+}
+
+static inline u32 sms_read_reg(u16 reg)
+{
+	return __raw_readl(OMAP_SMS_REGADDR(reg));
+}
+#else
+#define OMAP242X_SDRC_REGADDR(reg)	IO_ADDRESS(OMAP2420_SDRC_BASE + (reg))
+#define OMAP243X_SDRC_REGADDR(reg)	IO_ADDRESS(OMAP243X_SDRC_BASE + (reg))
+#define OMAP34XX_SDRC_REGADDR(reg)	IO_ADDRESS(OMAP343X_SDRC_BASE + (reg))
+#endif	/* __ASSEMBLER__ */
+
+#endif
diff --git a/arch/arm/mach-omap2/sleep.S b/arch/arm/mach-omap2/sleep.S
index 16247d5..46ccb9b 100644
--- a/arch/arm/mach-omap2/sleep.S
+++ b/arch/arm/mach-omap2/sleep.S
@@ -26,19 +26,10 @@
 #include <asm/arch/io.h>
 #include <asm/arch/pm.h>
 
-#define A_32KSYNC_CR_V		IO_ADDRESS(OMAP_TIMER32K_BASE+0x10)
-#define A_PRCM_VOLTCTRL_V	IO_ADDRESS(OMAP24XX_PRCM_BASE+0x50)
-#define A_PRCM_CLKCFG_CTRL_V	IO_ADDRESS(OMAP24XX_PRCM_BASE+0x80)
-#define A_CM_CLKEN_PLL_V	IO_ADDRESS(OMAP24XX_PRCM_BASE+0x500)
-#define A_CM_IDLEST_CKGEN_V	IO_ADDRESS(OMAP24XX_PRCM_BASE+0x520)
-#define A_CM_CLKSEL1_PLL_V	IO_ADDRESS(OMAP24XX_PRCM_BASE+0x540)
-#define A_CM_CLKSEL2_PLL_V	IO_ADDRESS(OMAP24XX_PRCM_BASE+0x544)
+#include "sdrc.h"
 
-#define A_SDRC_DLLA_CTRL_V	IO_ADDRESS(OMAP24XX_SDRC_BASE+0x60)
-#define	A_SDRC_POWER_V		IO_ADDRESS(OMAP24XX_SDRC_BASE+0x70)
-#define A_SDRC_RFR_CTRL_V	IO_ADDRESS(OMAP24XX_SDRC_BASE+0xA4)
+/* First address of reserved address space?  apparently valid for OMAP2 & 3 */
 #define A_SDRC0_V		(0xC0000000)
-#define A_SDRC_MANUAL_V		IO_ADDRESS(OMAP24XX_SDRC_BASE+0xA8)
 
 	.text
 
@@ -126,17 +117,11 @@ loop2:
 	ldmfd	sp!, {r0 - r12, pc}	@ restore regs and return
 
 A_SDRC_POWER:
-	.word A_SDRC_POWER_V
+	.word OMAP242X_SDRC_REGADDR(SDRC_POWER)
 A_SDRC0:
 	.word A_SDRC0_V
-A_CM_CLKSEL2_PLL_S:
-	.word A_CM_CLKSEL2_PLL_V
-A_CM_CLKEN_PLL:
-	.word A_CM_CLKEN_PLL_V
 A_SDRC_DLLA_CTRL_S:
-	.word A_SDRC_DLLA_CTRL_V
-A_SDRC_MANUAL_S:
-	.word A_SDRC_MANUAL_V
+	.word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)
 
 ENTRY(omap24xx_cpu_suspend_sz)
 	.word	. - omap24xx_cpu_suspend
diff --git a/arch/arm/mach-omap2/sram-fn.S b/arch/arm/mach-omap2/sram-fn.S
index b275766..4a9e491 100644
--- a/arch/arm/mach-omap2/sram-fn.S
+++ b/arch/arm/mach-omap2/sram-fn.S
@@ -27,19 +27,11 @@
 #include <asm/arch/io.h>
 #include <asm/hardware.h>
 
-#include "prcm-regs.h"
+#include "sdrc.h"
+#include "prm.h"
+#include "cm.h"
 
-#define TIMER_32KSYNCT_CR_V	IO_ADDRESS(OMAP24XX_32KSYNCT_BASE + 0x010)
-
-#define CM_CLKSEL2_PLL_V	IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x544)
-#define PRCM_VOLTCTRL_V		IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x050)
-#define PRCM_CLKCFG_CTRL_V	IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x080)
-#define CM_CLKEN_PLL_V		IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x500)
-#define CM_IDLEST_CKGEN_V	IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x520)
-#define CM_CLKSEL1_PLL_V	IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x540)
-
-#define SDRC_DLLA_CTRL_V	IO_ADDRESS(OMAP24XX_SDRC_BASE + 0x060)
-#define SDRC_RFR_CTRL_V		IO_ADDRESS(OMAP24XX_SDRC_BASE + 0x0a4)
+#define TIMER_32KSYNCT_CR_V	IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
 
 	.text
 
@@ -131,11 +123,11 @@ volt_delay:
 
 /* relative load constants */
 cm_clksel2_pll:
-	.word CM_CLKSEL2_PLL_V
+	.word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL2)
 sdrc_dlla_ctrl:
-	.word SDRC_DLLA_CTRL_V
+	.word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)
 prcm_voltctrl:
-	.word PRCM_VOLTCTRL_V
+	.word OMAP2420_PRM_REGADDR(OCP_MOD, 0x50)
 prcm_mask_val:
 	.word 0xFFFF3FFC
 timer_32ksynct_cr:
@@ -225,13 +217,13 @@ volt_delay_c:
 	mov	pc, lr			@ back to caller
 
 ddr_cm_clksel2_pll:
-	.word CM_CLKSEL2_PLL_V
+	.word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL2)
 ddr_sdrc_dlla_ctrl:
-	.word SDRC_DLLA_CTRL_V
+	.word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)
 ddr_sdrc_rfr_ctrl:
-	.word SDRC_RFR_CTRL_V
+	.word OMAP242X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
 ddr_prcm_voltctrl:
-	.word PRCM_VOLTCTRL_V
+	.word OMAP2420_PRM_REGADDR(OCP_MOD, 0x50)
 ddr_prcm_mask_val:
 	.word 0xFFFF3FFC
 ddr_timer_32ksynct:
@@ -316,17 +308,17 @@ wait_dll_lock:
 	ldmfd	sp!, {r0-r12, pc}	@ restore regs and return
 
 set_config:
-	.word PRCM_CLKCFG_CTRL_V
+	.word OMAP2420_PRM_REGADDR(OCP_MOD, 0x80)
 pll_ctl:
-	.word CM_CLKEN_PLL_V
+	.word OMAP2420_CM_REGADDR(PLL_MOD, CM_FCLKEN1)
 pll_stat:
-	.word CM_IDLEST_CKGEN_V
+	.word OMAP2420_CM_REGADDR(PLL_MOD, CM_IDLEST1)
 pll_div:
-	.word CM_CLKSEL1_PLL_V
+	.word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL)
 sdrc_rfr:
-	.word SDRC_RFR_CTRL_V
+	.word OMAP242X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
 dlla_ctrl:
-	.word SDRC_DLLA_CTRL_V
+	.word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)
 
 ENTRY(sram_set_prcm_sz)
 	.word	. - sram_set_prcm
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index 3234dee..78d05f2 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -3,6 +3,11 @@
  *
  * OMAP2 GP timer support.
  *
+ * Update to use new clocksource/clockevent layers
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ * Copyright (C) 2007 MontaVista Software, Inc.
+ *
+ * Original driver:
  * Copyright (C) 2005 Nokia Corporation
  * Author: Paul Mundt <paul.mundt@nokia.com>
  *         Juha Yrjölä <juha.yrjola@nokia.com>
@@ -25,24 +30,23 @@
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/irq.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
 
 #include <asm/mach/time.h>
 #include <asm/arch/dmtimer.h>
 
 static struct omap_dm_timer *gptimer;
-
-static inline void omap2_gp_timer_start(unsigned long load_val)
-{
-	omap_dm_timer_set_load(gptimer, 1, 0xffffffff - load_val);
-	omap_dm_timer_set_int_enable(gptimer, OMAP_TIMER_INT_OVERFLOW);
-	omap_dm_timer_start(gptimer);
-}
+static struct clock_event_device clockevent_gpt;
 
 static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id)
 {
-	omap_dm_timer_write_status(gptimer, OMAP_TIMER_INT_OVERFLOW);
-	timer_tick();
+	struct omap_dm_timer *gpt = (struct omap_dm_timer *)dev_id;
+	struct clock_event_device *evt = &clockevent_gpt;
+
+	omap_dm_timer_write_status(gpt, OMAP_TIMER_INT_OVERFLOW);
 
+	evt->event_handler(evt);
 	return IRQ_HANDLED;
 }
 
@@ -52,20 +56,138 @@ static struct irqaction omap2_gp_timer_irq = {
 	.handler	= omap2_gp_timer_interrupt,
 };
 
-static void __init omap2_gp_timer_init(void)
+static int omap2_gp_timer_set_next_event(unsigned long cycles,
+					 struct clock_event_device *evt)
 {
-	u32 tick_period;
+	omap_dm_timer_set_load(gptimer, 0, 0xffffffff - cycles);
+	omap_dm_timer_start(gptimer);
+
+	return 0;
+}
+
+static void omap2_gp_timer_set_mode(enum clock_event_mode mode,
+				    struct clock_event_device *evt)
+{
+	u32 period;
+
+	omap_dm_timer_stop(gptimer);
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		period = clk_get_rate(omap_dm_timer_get_fclk(gptimer)) / HZ;
+		period -= 1;
+
+		omap_dm_timer_set_load(gptimer, 1, 0xffffffff - period);
+		omap_dm_timer_start(gptimer);
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+		break;
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_RESUME:
+		break;
+	}
+}
+
+static struct clock_event_device clockevent_gpt = {
+	.name		= "gp timer",
+	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.shift		= 32,
+	.set_next_event	= omap2_gp_timer_set_next_event,
+	.set_mode	= omap2_gp_timer_set_mode,
+};
+
+static void __init omap2_gp_clockevent_init(void)
+{
+	u32 tick_rate;
 
-	omap_dm_timer_init();
 	gptimer = omap_dm_timer_request_specific(1);
 	BUG_ON(gptimer == NULL);
 
+#if defined(CONFIG_OMAP_32K_TIMER)
+	omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_32_KHZ);
+#else
 	omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_SYS_CLK);
-	tick_period = clk_get_rate(omap_dm_timer_get_fclk(gptimer)) / HZ;
-	tick_period -= 1;
+#endif
+	tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer));
 
+	omap2_gp_timer_irq.dev_id = (void *)gptimer;
 	setup_irq(omap_dm_timer_get_irq(gptimer), &omap2_gp_timer_irq);
-	omap2_gp_timer_start(tick_period);
+	omap_dm_timer_set_int_enable(gptimer, OMAP_TIMER_INT_OVERFLOW);
+
+	clockevent_gpt.mult = div_sc(tick_rate, NSEC_PER_SEC,
+				     clockevent_gpt.shift);
+	clockevent_gpt.max_delta_ns =
+		clockevent_delta2ns(0xffffffff, &clockevent_gpt);
+	clockevent_gpt.min_delta_ns =
+		clockevent_delta2ns(1, &clockevent_gpt);
+
+	clockevent_gpt.cpumask = cpumask_of_cpu(0);
+	clockevents_register_device(&clockevent_gpt);
+}
+
+#ifdef CONFIG_OMAP_32K_TIMER
+/* 
+ * When 32k-timer is enabled, don't use GPTimer for clocksource
+ * instead, just leave default clocksource which uses the 32k
+ * sync counter.  See clocksource setup in see plat-omap/common.c. 
+ */
+
+static inline void __init omap2_gp_clocksource_init(void) {}
+#else
+/*
+ * clocksource
+ */
+static struct omap_dm_timer *gpt_clocksource;
+static cycle_t clocksource_read_cycles(void)
+{
+	return (cycle_t)omap_dm_timer_read_counter(gpt_clocksource);
+}
+
+static struct clocksource clocksource_gpt = {
+	.name		= "gp timer",
+	.rating		= 300,
+	.read		= clocksource_read_cycles,
+	.mask		= CLOCKSOURCE_MASK(32),
+	.shift		= 24,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+/* Setup free-running counter for clocksource */
+static void __init omap2_gp_clocksource_init(void)
+{
+	static struct omap_dm_timer *gpt;
+	u32 tick_rate, tick_period;
+	static char err1[] __initdata = KERN_ERR
+		"%s: failed to request dm-timer\n";
+	static char err2[] __initdata = KERN_ERR
+		"%s: can't register clocksource!\n";
+
+	gpt = omap_dm_timer_request();
+	if (!gpt)
+		printk(err1, clocksource_gpt.name);
+	gpt_clocksource = gpt;
+
+	omap_dm_timer_set_source(gpt, OMAP_TIMER_SRC_SYS_CLK);
+	tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gpt));
+	tick_period = (tick_rate / HZ) - 1;
+
+	omap_dm_timer_set_load(gpt, 1, 0);
+	omap_dm_timer_start(gpt);
+
+	clocksource_gpt.mult =
+		clocksource_khz2mult(tick_rate/1000, clocksource_gpt.shift);
+	if (clocksource_register(&clocksource_gpt))
+		printk(err2, clocksource_gpt.name);
+}
+#endif
+
+static void __init omap2_gp_timer_init(void)
+{
+	omap_dm_timer_init();
+
+	omap2_gp_clockevent_init();
+	omap2_gp_clocksource_init();
 }
 
 struct sys_timer omap_timer = {
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index 8f56c25..bc639a3 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -9,8 +9,6 @@ obj-m :=
 obj-n :=
 obj-  :=
 
-obj-$(CONFIG_OMAP_32K_TIMER)	+= timer32k.o
-
 # OCPI interconnect support for 1710, 1610 and 5912
 obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o
 
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 0a60324..32a533b 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -304,6 +304,23 @@ void propagate_rate(struct clk * tclk)
 	}
 }
 
+/**
+ * recalculate_root_clocks - recalculate and propagate all root clocks
+ *
+ * Recalculates all root clocks (clocks with no parent), which if the
+ * clock's .recalc is set correctly, should also propagate their rates.
+ * Called at init.
+ */
+void recalculate_root_clocks(void)
+{
+	struct clk *clkp;
+
+	list_for_each_entry(clkp, &clocks, node) {
+		if (unlikely(!clkp->parent) && likely((u32)clkp->recalc))
+			clkp->recalc(clkp);
+	}
+}
+
 int clk_register(struct clk *clk)
 {
 	if (clk == NULL || IS_ERR(clk))
@@ -358,6 +375,30 @@ void clk_allow_idle(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_allow_idle);
 
+void clk_enable_init_clocks(void)
+{
+	struct clk *clkp;
+
+	list_for_each_entry(clkp, &clocks, node) {
+		if (clkp->flags & ENABLE_ON_INIT)
+			clk_enable(clkp);
+	}
+}
+EXPORT_SYMBOL(clk_enable_init_clocks);
+
+#ifdef CONFIG_CPU_FREQ
+void clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&clockfw_lock, flags);
+	if (arch_clock->clk_init_cpufreq_table)
+		arch_clock->clk_init_cpufreq_table(table);
+	spin_unlock_irqrestore(&clockfw_lock, flags);
+}
+EXPORT_SYMBOL(clk_init_cpufreq_table);
+#endif
+
 /*-------------------------------------------------------------------------*/
 
 #ifdef CONFIG_OMAP_RESET_CLOCKS
@@ -396,3 +437,4 @@ int __init clk_init(struct clk_functions * custom_clocks)
 
 	return 0;
 }
+
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index 4f0f9c4..bd1cef2c 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -27,11 +27,16 @@
 #include <asm/setup.h>
 
 #include <asm/arch/board.h>
+#include <asm/arch/control.h>
 #include <asm/arch/mux.h>
 #include <asm/arch/fpga.h>
 
 #include <asm/arch/clock.h>
 
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+# include "../mach-omap2/sdrc.h"
+#endif
+
 #define NO_LENGTH_CHECK 0xffffffff
 
 unsigned char omap_bootloader_tag[512];
@@ -171,8 +176,8 @@ console_initcall(omap_add_serial_console);
 
 #if defined(CONFIG_ARCH_OMAP16XX)
 #define TIMER_32K_SYNCHRONIZED		0xfffbc410
-#elif defined(CONFIG_ARCH_OMAP24XX)
-#define TIMER_32K_SYNCHRONIZED		(OMAP24XX_32KSYNCT_BASE + 0x10)
+#elif defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#define TIMER_32K_SYNCHRONIZED		(OMAP2_32KSYNCT_BASE + 0x10)
 #endif
 
 #ifdef	TIMER_32K_SYNCHRONIZED
@@ -193,12 +198,35 @@ static struct clocksource clocksource_32k = {
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
+/*
+ * Rounds down to nearest nsec.
+ */
+unsigned long long omap_32k_ticks_to_nsecs(unsigned long ticks_32k)
+{
+	return cyc2ns(&clocksource_32k, ticks_32k);
+}
+
+/*
+ * Returns current time from boot in nsecs. It's OK for this to wrap
+ * around for now, as it's just a relative time stamp.
+ */
+unsigned long long sched_clock(void)
+{
+	return omap_32k_ticks_to_nsecs(omap_32k_read());
+}
+
 static int __init omap_init_clocksource_32k(void)
 {
 	static char err[] __initdata = KERN_ERR
 			"%s: can't register clocksource!\n";
 
-	if (cpu_is_omap16xx() || cpu_is_omap24xx()) {
+	if (cpu_is_omap16xx() || cpu_class_is_omap2()) {
+		struct clk *sync_32k_ick;
+
+		sync_32k_ick = clk_get(NULL, "omap_32ksync_ick");
+		if (sync_32k_ick)
+			clk_enable(sync_32k_ick);
+
 		clocksource_32k.mult = clocksource_hz2mult(32768,
 					    clocksource_32k.shift);
 
@@ -210,3 +238,33 @@ static int __init omap_init_clocksource_32k(void)
 arch_initcall(omap_init_clocksource_32k);
 
 #endif	/* TIMER_32K_SYNCHRONIZED */
+
+/* Global address base setup code */
+
+#if defined(CONFIG_ARCH_OMAP2420)
+void __init omap2_set_globals_242x(void)
+{
+	omap2_sdrc_base = OMAP2420_SDRC_BASE;
+	omap2_sms_base = OMAP2420_SMS_BASE;
+	omap_ctrl_base_set(OMAP2420_CTRL_BASE);
+}
+#endif
+
+#if defined(CONFIG_ARCH_OMAP2430)
+void __init omap2_set_globals_243x(void)
+{
+	omap2_sdrc_base = OMAP243X_SDRC_BASE;
+	omap2_sms_base = OMAP243X_SMS_BASE;
+	omap_ctrl_base_set(OMAP243X_CTRL_BASE);
+}
+#endif
+
+#if defined(CONFIG_ARCH_OMAP3430)
+void __init omap2_set_globals_343x(void)
+{
+	omap2_sdrc_base = OMAP343X_SDRC_BASE;
+	omap2_sms_base = OMAP343X_SMS_BASE;
+	omap_ctrl_base_set(OMAP343X_CTRL_BASE);
+}
+#endif
+
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 8c78e4e..1903a34 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -136,7 +136,6 @@ struct gpio_bank {
 	u16 irq;
 	u16 virtual_irq_start;
 	int method;
-	u32 reserved_map;
 #if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	u32 suspend_wakeup;
 	u32 saved_wakeup;
@@ -149,7 +148,9 @@ struct gpio_bank {
 	u32 saved_fallingdetect;
 	u32 saved_risingdetect;
 #endif
+	u32 level_mask;
 	spinlock_t lock;
+	struct gpio_chip chip;
 };
 
 #define METHOD_MPUIO		0
@@ -538,10 +539,9 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
 			bank->enabled_non_wakeup_gpios &= ~gpio_bit;
 	}
 
-	/*
-	 * FIXME: Possibly do 'set_irq_handler(j, handle_level_irq)' if only
-	 * level triggering requested.
-	 */
+	bank->level_mask =
+		__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0) |
+		__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
 }
 #endif
 
@@ -652,6 +652,12 @@ static int gpio_irq_type(unsigned irq, unsigned type)
 		irq_desc[irq].status |= type;
 	}
 	spin_unlock_irqrestore(&bank->lock, flags);
+
+	if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
+		__set_irq_handler_unlocked(irq, handle_level_irq);
+	else if (type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
+		__set_irq_handler_unlocked(irq, handle_edge_irq);
+
 	return retval;
 }
 
@@ -903,19 +909,17 @@ int omap_request_gpio(int gpio)
 {
 	struct gpio_bank *bank;
 	unsigned long flags;
+	int status;
 
 	if (check_gpio(gpio) < 0)
 		return -EINVAL;
 
+	status = gpio_request(gpio, NULL);
+	if (status < 0)
+		return status;
+
 	bank = get_gpio_bank(gpio);
 	spin_lock_irqsave(&bank->lock, flags);
-	if (unlikely(bank->reserved_map & (1 << get_gpio_index(gpio)))) {
-		printk(KERN_ERR "omap-gpio: GPIO %d is already reserved!\n", gpio);
-		dump_stack();
-		spin_unlock_irqrestore(&bank->lock, flags);
-		return -1;
-	}
-	bank->reserved_map |= (1 << get_gpio_index(gpio));
 
 	/* Set trigger to none. You need to enable the desired trigger with
 	 * request_irq() or set_irq_type().
@@ -945,10 +949,11 @@ void omap_free_gpio(int gpio)
 		return;
 	bank = get_gpio_bank(gpio);
 	spin_lock_irqsave(&bank->lock, flags);
-	if (unlikely(!(bank->reserved_map & (1 << get_gpio_index(gpio))))) {
+	if (unlikely(!gpiochip_is_requested(&bank->chip,
+				get_gpio_index(gpio)))) {
+		spin_unlock_irqrestore(&bank->lock, flags);
 		printk(KERN_ERR "omap-gpio: GPIO %d wasn't reserved!\n", gpio);
 		dump_stack();
-		spin_unlock_irqrestore(&bank->lock, flags);
 		return;
 	}
 #ifdef CONFIG_ARCH_OMAP16XX
@@ -965,9 +970,9 @@ void omap_free_gpio(int gpio)
 		__raw_writel(1 << get_gpio_index(gpio), reg);
 	}
 #endif
-	bank->reserved_map &= ~(1 << get_gpio_index(gpio));
 	_reset_gpio(bank, gpio);
 	spin_unlock_irqrestore(&bank->lock, flags);
+	gpio_free(gpio);
 }
 
 /*
@@ -1022,12 +1027,7 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 			isr &= 0x0000ffff;
 
 		if (cpu_class_is_omap2()) {
-			level_mask =
-				__raw_readl(bank->base +
-					OMAP24XX_GPIO_LEVELDETECT0) |
-				__raw_readl(bank->base +
-					OMAP24XX_GPIO_LEVELDETECT1);
-			level_mask &= enabled;
+			level_mask = bank->level_mask & enabled;
 		}
 
 		/* clear edge sensitive interrupts before handler(s) are
@@ -1052,51 +1052,13 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 		gpio_irq = bank->virtual_irq_start;
 		for (; isr != 0; isr >>= 1, gpio_irq++) {
 			struct irq_desc *d;
-			int irq_mask;
+
 			if (!(isr & 1))
 				continue;
 			d = irq_desc + gpio_irq;
-			/* Don't run the handler if it's already running
-			 * or was disabled lazely.
-			 */
-			if (unlikely((d->depth ||
-				      (d->status & IRQ_INPROGRESS)))) {
-				irq_mask = 1 <<
-					(gpio_irq - bank->virtual_irq_start);
-				/* The unmasking will be done by
-				 * enable_irq in case it is disabled or
-				 * after returning from the handler if
-				 * it's already running.
-				 */
-				_enable_gpio_irqbank(bank, irq_mask, 0);
-				if (!d->depth) {
-					/* Level triggered interrupts
-					 * won't ever be reentered
-					 */
-					BUG_ON(level_mask & irq_mask);
-					d->status |= IRQ_PENDING;
-				}
-				continue;
-			}
 
 			desc_handle_irq(gpio_irq, d);
-
-			if (unlikely((d->status & IRQ_PENDING) && !d->depth)) {
-				irq_mask = 1 <<
-					(gpio_irq - bank->virtual_irq_start);
-				d->status &= ~IRQ_PENDING;
-				_enable_gpio_irqbank(bank, irq_mask, 1);
-				retrigger |= irq_mask;
-			}
 		}
-
-		if (cpu_class_is_omap2()) {
-			/* clear level sensitive interrupts after handler(s) */
-			_enable_gpio_irqbank(bank, isr_saved & level_mask, 0);
-			_clear_gpio_irqbank(bank, isr_saved & level_mask);
-			_enable_gpio_irqbank(bank, isr_saved & level_mask, 1);
-		}
-
 	}
 	/* if bank has any level sensitive GPIO pin interrupt
 	configured, we must unmask the bank interrupt only after
@@ -1135,6 +1097,14 @@ static void gpio_unmask_irq(unsigned int irq)
 {
 	unsigned int gpio = irq - IH_GPIO_BASE;
 	struct gpio_bank *bank = get_irq_chip_data(irq);
+	unsigned int irq_mask = 1 << get_gpio_index(gpio);
+
+	/* For level-triggered GPIOs, the clearing must be done after
+	 * the HW source is cleared, thus after the handler has run */
+	if (bank->level_mask & irq_mask) {
+		_set_gpio_irqenable(bank, gpio, 0);
+		_clear_gpio_irqstatus(bank, gpio);
+	}
 
 	_set_gpio_irqenable(bank, gpio, 1);
 }
@@ -1266,6 +1236,53 @@ static inline void mpuio_init(void) {}
 
 /*---------------------------------------------------------------------*/
 
+/* REVISIT these are stupid implementations!  replace by ones that
+ * don't switch on METHOD_* and which mostly avoid spinlocks
+ */
+
+static int gpio_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct gpio_bank *bank;
+	unsigned long flags;
+
+	bank = container_of(chip, struct gpio_bank, chip);
+	spin_lock_irqsave(&bank->lock, flags);
+	_set_gpio_direction(bank, offset, 1);
+	spin_unlock_irqrestore(&bank->lock, flags);
+	return 0;
+}
+
+static int gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	return omap_get_gpio_datain(chip->base + offset);
+}
+
+static int gpio_output(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct gpio_bank *bank;
+	unsigned long flags;
+
+	bank = container_of(chip, struct gpio_bank, chip);
+	spin_lock_irqsave(&bank->lock, flags);
+	_set_gpio_dataout(bank, offset, value);
+	_set_gpio_direction(bank, offset, 0);
+	spin_unlock_irqrestore(&bank->lock, flags);
+	return 0;
+}
+
+static void gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct gpio_bank *bank;
+	unsigned long flags;
+
+	bank = container_of(chip, struct gpio_bank, chip);
+	spin_lock_irqsave(&bank->lock, flags);
+	_set_gpio_dataout(bank, offset, value);
+	spin_unlock_irqrestore(&bank->lock, flags);
+}
+
+/*---------------------------------------------------------------------*/
+
 static int initialized;
 #if !defined(CONFIG_ARCH_OMAP3)
 static struct clk * gpio_ick;
@@ -1293,6 +1310,7 @@ static struct lock_class_key gpio_lock_class;
 static int __init _omap_gpio_init(void)
 {
 	int i;
+	int gpio = 0;
 	struct gpio_bank *bank;
 #if defined(CONFIG_ARCH_OMAP3)
 	char clk_name[11];
@@ -1423,7 +1441,6 @@ static int __init _omap_gpio_init(void)
 		int j, gpio_count = 16;
 
 		bank = &gpio_bank[i];
-		bank->reserved_map = 0;
 		bank->base = IO_ADDRESS(bank->base);
 		spin_lock_init(&bank->lock);
 		if (bank_is_mpuio(bank))
@@ -1461,6 +1478,26 @@ static int __init _omap_gpio_init(void)
 			gpio_count = 32;
 		}
 #endif
+
+		/* REVISIT eventually switch from OMAP-specific gpio structs
+		 * over to the generic ones
+		 */
+		bank->chip.direction_input = gpio_input;
+		bank->chip.get = gpio_get;
+		bank->chip.direction_output = gpio_output;
+		bank->chip.set = gpio_set;
+		if (bank_is_mpuio(bank)) {
+			bank->chip.label = "mpuio";
+			bank->chip.base = OMAP_MPUIO(0);
+		} else {
+			bank->chip.label = "gpio";
+			bank->chip.base = gpio;
+			gpio += gpio_count;
+		}
+		bank->chip.ngpio = gpio_count;
+
+		gpiochip_add(&bank->chip);
+
 		for (j = bank->virtual_irq_start;
 		     j < bank->virtual_irq_start + gpio_count; j++) {
 			lockdep_set_class(&irq_desc[j].lock, &gpio_lock_class);
@@ -1757,8 +1794,10 @@ static int dbg_gpio_show(struct seq_file *s, void *unused)
 
 		for (j = 0; j < bankwidth; j++, gpio++, mask <<= 1) {
 			unsigned	irq, value, is_in, irqstat;
+			const char	*label;
 
-			if (!(bank->reserved_map & mask))
+			label = gpiochip_is_requested(&bank->chip, j);
+			if (!label)
 				continue;
 
 			irq = bank->virtual_irq_start + j;
@@ -1766,13 +1805,16 @@ static int dbg_gpio_show(struct seq_file *s, void *unused)
 			is_in = gpio_is_input(bank, mask);
 
 			if (bank_is_mpuio(bank))
-				seq_printf(s, "MPUIO %2d: ", j);
+				seq_printf(s, "MPUIO %2d ", j);
 			else
-				seq_printf(s, "GPIO %3d: ", gpio);
-			seq_printf(s, "%s %s",
+				seq_printf(s, "GPIO %3d ", gpio);
+			seq_printf(s, "(%10s): %s %s",
+					label,
 					is_in ? "in " : "out",
 					value ? "hi"  : "lo");
 
+/* FIXME for at least omap2, show pullup/pulldown state */
+
 			irqstat = irq_desc[irq].status;
 			if (is_in && ((bank->suspend_wakeup & mask)
 					|| irqstat & IRQ_TYPE_SENSE_MASK)) {
@@ -1795,10 +1837,10 @@ static int dbg_gpio_show(struct seq_file *s, void *unused)
 					trigger = "high";
 					break;
 				case IRQ_TYPE_NONE:
-					trigger = "(unspecified)";
+					trigger = "(?)";
 					break;
 				}
-				seq_printf(s, ", irq-%d %s%s",
+				seq_printf(s, ", irq-%d %-8s%s",
 						irq, trigger,
 						(bank->suspend_wakeup & mask)
 							? " wakeup" : "");
diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c
index 75211f2..6f3f459 100644
--- a/arch/arm/plat-omap/mux.c
+++ b/arch/arm/plat-omap/mux.c
@@ -3,9 +3,9 @@
  *
  * Utility to set the Omap MUX and PULL_DWN registers from a table in mux.h
  *
- * Copyright (C) 2003 - 2005 Nokia Corporation
+ * Copyright (C) 2003 - 2008 Nokia Corporation
  *
- * Written by Tony Lindgren <tony.lindgren@nokia.com>
+ * Written by Tony Lindgren
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -32,21 +32,17 @@
 
 #ifdef CONFIG_OMAP_MUX
 
-#define OMAP24XX_L4_BASE	0x48000000
-#define OMAP24XX_PULL_ENA	(1 << 3)
-#define OMAP24XX_PULL_UP	(1 << 4)
+static struct omap_mux_cfg *mux_cfg;
 
-static struct pin_config * pin_table;
-static unsigned long pin_table_sz;
-
-extern struct pin_config * omap730_pins;
-extern struct pin_config * omap1xxx_pins;
-extern struct pin_config * omap24xx_pins;
-
-int __init omap_mux_register(struct pin_config * pins, unsigned long size)
+int __init omap_mux_register(struct omap_mux_cfg *arch_mux_cfg)
 {
-	pin_table = pins;
-	pin_table_sz = size;
+	if (!arch_mux_cfg || !arch_mux_cfg->pins || arch_mux_cfg->size == 0
+			|| !arch_mux_cfg->cfg_reg) {
+		printk(KERN_ERR "Invalid pin table\n");
+		return -EINVAL;
+	}
+
+	mux_cfg = arch_mux_cfg;
 
 	return 0;
 }
@@ -56,152 +52,26 @@ int __init omap_mux_register(struct pin_config * pins, unsigned long size)
  */
 int __init_or_module omap_cfg_reg(const unsigned long index)
 {
-	static DEFINE_SPINLOCK(mux_spin_lock);
-
-	unsigned long flags;
-	struct pin_config *cfg;
-	unsigned int reg_orig = 0, reg = 0, pu_pd_orig = 0, pu_pd = 0,
-		pull_orig = 0, pull = 0;
-	unsigned int mask, warn = 0;
+	struct pin_config *reg;
 
-	if (!pin_table)
-		BUG();
+	if (mux_cfg == NULL) {
+		printk(KERN_ERR "Pin mux table not initialized\n");
+		return -ENODEV;
+	}
 
-	if (index >= pin_table_sz) {
+	if (index >= mux_cfg->size) {
 		printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n",
-		       index, pin_table_sz);
+		       index, mux_cfg->size);
 		dump_stack();
 		return -ENODEV;
 	}
 
-	cfg = (struct pin_config *)&pin_table[index];
-	if (cpu_is_omap24xx()) {
-		u8 reg = 0;
-
-		reg |= cfg->mask & 0x7;
-		if (cfg->pull_val)
-			reg |= OMAP24XX_PULL_ENA;
-		if(cfg->pu_pd_val)
-			reg |= OMAP24XX_PULL_UP;
-#if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
-		{
-			u8 orig = omap_readb(OMAP24XX_L4_BASE + cfg->mux_reg);
-			u8 debug = 0;
-
-#ifdef	CONFIG_OMAP_MUX_DEBUG
-			debug = cfg->debug;
-#endif
-			warn = (orig != reg);
-			if (debug || warn)
-				printk("MUX: setup %s (0x%08x): 0x%02x -> 0x%02x\n",
-						cfg->name,
-						OMAP24XX_L4_BASE + cfg->mux_reg,
-						orig, reg);
-		}
-#endif
-		omap_writeb(reg, OMAP24XX_L4_BASE + cfg->mux_reg);
+	reg = (struct pin_config *)&mux_cfg->pins[index];
 
-		return 0;
-	}
-
-	/* Check the mux register in question */
-	if (cfg->mux_reg) {
-		unsigned	tmp1, tmp2;
-
-		spin_lock_irqsave(&mux_spin_lock, flags);
-		reg_orig = omap_readl(cfg->mux_reg);
-
-		/* The mux registers always seem to be 3 bits long */
-		mask = (0x7 << cfg->mask_offset);
-		tmp1 = reg_orig & mask;
-		reg = reg_orig & ~mask;
-
-		tmp2 = (cfg->mask << cfg->mask_offset);
-		reg |= tmp2;
-
-		if (tmp1 != tmp2)
-			warn = 1;
-
-		omap_writel(reg, cfg->mux_reg);
-		spin_unlock_irqrestore(&mux_spin_lock, flags);
-	}
-
-	/* Check for pull up or pull down selection on 1610 */
-	if (!cpu_is_omap15xx()) {
-		if (cfg->pu_pd_reg && cfg->pull_val) {
-			spin_lock_irqsave(&mux_spin_lock, flags);
-			pu_pd_orig = omap_readl(cfg->pu_pd_reg);
-			mask = 1 << cfg->pull_bit;
-
-			if (cfg->pu_pd_val) {
-				if (!(pu_pd_orig & mask))
-					warn = 1;
-				/* Use pull up */
-				pu_pd = pu_pd_orig | mask;
-			} else {
-				if (pu_pd_orig & mask)
-					warn = 1;
-				/* Use pull down */
-				pu_pd = pu_pd_orig & ~mask;
-			}
-			omap_writel(pu_pd, cfg->pu_pd_reg);
-			spin_unlock_irqrestore(&mux_spin_lock, flags);
-		}
-	}
-
-	/* Check for an associated pull down register */
-	if (cfg->pull_reg) {
-		spin_lock_irqsave(&mux_spin_lock, flags);
-		pull_orig = omap_readl(cfg->pull_reg);
-		mask = 1 << cfg->pull_bit;
-
-		if (cfg->pull_val) {
-			if (pull_orig & mask)
-				warn = 1;
-			/* Low bit = pull enabled */
-			pull = pull_orig & ~mask;
-		} else {
-			if (!(pull_orig & mask))
-				warn = 1;
-			/* High bit = pull disabled */
-			pull = pull_orig | mask;
-		}
-
-		omap_writel(pull, cfg->pull_reg);
-		spin_unlock_irqrestore(&mux_spin_lock, flags);
-	}
-
-	if (warn) {
-#ifdef CONFIG_OMAP_MUX_WARNINGS
-		printk(KERN_WARNING "MUX: initialized %s\n", cfg->name);
-#endif
-	}
-
-#ifdef CONFIG_OMAP_MUX_DEBUG
-	if (cfg->debug || warn) {
-		printk("MUX: Setting register %s\n", cfg->name);
-		printk("      %s (0x%08x) = 0x%08x -> 0x%08x\n",
-		       cfg->mux_reg_name, cfg->mux_reg, reg_orig, reg);
-
-		if (!cpu_is_omap15xx()) {
-			if (cfg->pu_pd_reg && cfg->pull_val) {
-				printk("      %s (0x%08x) = 0x%08x -> 0x%08x\n",
-				       cfg->pu_pd_name, cfg->pu_pd_reg,
-				       pu_pd_orig, pu_pd);
-			}
-		}
-
-		if (cfg->pull_reg)
-			printk("      %s (0x%08x) = 0x%08x -> 0x%08x\n",
-			       cfg->pull_name, cfg->pull_reg, pull_orig, pull);
-	}
-#endif
+	if (!mux_cfg->cfg_reg)
+		return -ENODEV;
 
-#ifdef CONFIG_OMAP_MUX_ERRORS
-	return warn ? -ETXTBSY : 0;
-#else
-	return 0;
-#endif
+	return mux_cfg->cfg_reg(reg);
 }
 EXPORT_SYMBOL(omap_cfg_reg);
 #else
diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c
index a5aedf9..a619475 100644
--- a/arch/arm/plat-omap/usb.c
+++ b/arch/arm/plat-omap/usb.c
@@ -33,6 +33,7 @@
 #include <asm/system.h>
 #include <asm/hardware.h>
 
+#include <asm/arch/control.h>
 #include <asm/arch/mux.h>
 #include <asm/arch/usb.h>
 #include <asm/arch/board.h>
@@ -76,7 +77,7 @@
 
 /*-------------------------------------------------------------------------*/
 
-#ifdef	CONFIG_ARCH_OMAP_OTG
+#if	defined(CONFIG_ARCH_OMAP_OTG) || defined(CONFIG_USB_MUSB_OTG)
 
 static struct otg_transceiver *xceiv;
 
@@ -110,12 +111,48 @@ EXPORT_SYMBOL(otg_set_transceiver);
 
 #if defined(CONFIG_ARCH_OMAP_OTG) || defined(CONFIG_ARCH_OMAP15XX)
 
+static void omap2_usb_devconf_clear(u8 port, u32 mask)
+{
+	u32 r;
+
+	r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
+	r &= ~USBTXWRMODEI(port, mask);
+	omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0);
+}
+
+static void omap2_usb_devconf_set(u8 port, u32 mask)
+{
+	u32 r;
+
+	r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
+	r |= USBTXWRMODEI(port, mask);
+	omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0);
+}
+
+static void omap2_usb2_disable_5pinbitll(void)
+{
+	u32 r;
+
+	r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
+	r &= ~(USBTXWRMODEI(2, USB_BIDIR_TLL) | USBT2TLL5PI);
+	omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0);
+}
+
+static void omap2_usb2_enable_5pinunitll(void)
+{
+	u32 r;
+
+	r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
+	r |= USBTXWRMODEI(2, USB_UNIDIR_TLL) | USBT2TLL5PI;
+	omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0);
+}
+
 static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device)
 {
 	u32	syscon1 = 0;
 
 	if (cpu_is_omap24xx())
-		CONTROL_DEVCONF_REG &= ~USBT0WRMODEI(USB_BIDIR_TLL);
+		omap2_usb_devconf_clear(0, USB_BIDIR_TLL);
 
 	if (nwires == 0) {
 		if (cpu_class_is_omap1() && !cpu_is_omap15xx()) {
@@ -187,19 +224,19 @@ static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device)
 	case 3:
 		syscon1 = 2;
 		if (cpu_is_omap24xx())
-			CONTROL_DEVCONF_REG |= USBT0WRMODEI(USB_BIDIR);
+			omap2_usb_devconf_set(0, USB_BIDIR);
 		break;
 	case 4:
 		syscon1 = 1;
 		if (cpu_is_omap24xx())
-			CONTROL_DEVCONF_REG |= USBT0WRMODEI(USB_BIDIR);
+			omap2_usb_devconf_set(0, USB_BIDIR);
 		break;
 	case 6:
 		syscon1 = 3;
 		if (cpu_is_omap24xx()) {
 			omap_cfg_reg(J19_24XX_USB0_VP);
 			omap_cfg_reg(K20_24XX_USB0_VM);
-			CONTROL_DEVCONF_REG |= USBT0WRMODEI(USB_UNIDIR);
+			omap2_usb_devconf_set(0, USB_UNIDIR);
 		} else {
 			omap_cfg_reg(AA9_USB0_VP);
 			omap_cfg_reg(R9_USB0_VM);
@@ -220,7 +257,7 @@ static u32 __init omap_usb1_init(unsigned nwires)
 	if (cpu_class_is_omap1() && !cpu_is_omap15xx() && nwires != 6)
 		USB_TRANSCEIVER_CTRL_REG &= ~CONF_USB1_UNI_R;
 	if (cpu_is_omap24xx())
-		CONTROL_DEVCONF_REG &= ~USBT1WRMODEI(USB_BIDIR_TLL);
+		omap2_usb_devconf_clear(1, USB_BIDIR_TLL);
 
 	if (nwires == 0)
 		return 0;
@@ -261,17 +298,17 @@ static u32 __init omap_usb1_init(unsigned nwires)
 		 * this TLL link is not using DP/DM
 		 */
 		syscon1 = 1;
-		CONTROL_DEVCONF_REG |= USBT1WRMODEI(USB_BIDIR_TLL);
+		omap2_usb_devconf_set(1, USB_BIDIR_TLL);
 		break;
 	case 3:
 		syscon1 = 2;
 		if (cpu_is_omap24xx())
-			CONTROL_DEVCONF_REG |= USBT1WRMODEI(USB_BIDIR);
+			omap2_usb_devconf_set(1, USB_BIDIR);
 		break;
 	case 4:
 		syscon1 = 1;
 		if (cpu_is_omap24xx())
-			CONTROL_DEVCONF_REG |= USBT1WRMODEI(USB_BIDIR);
+			omap2_usb_devconf_set(1, USB_BIDIR);
 		break;
 	case 6:
 		if (cpu_is_omap24xx())
@@ -295,8 +332,7 @@ static u32 __init omap_usb2_init(unsigned nwires, unsigned alt_pingroup)
 	u32	syscon1 = 0;
 
 	if (cpu_is_omap24xx()) {
-		CONTROL_DEVCONF_REG &= ~(USBT2WRMODEI(USB_BIDIR_TLL)
-					| USBT2TLL5PI);
+		omap2_usb2_disable_5pinbitll();
 		alt_pingroup = 0;
 	}
 
@@ -343,17 +379,17 @@ static u32 __init omap_usb2_init(unsigned nwires, unsigned alt_pingroup)
 		 * this TLL link is not using DP/DM
 		 */
 		syscon1 = 1;
-		CONTROL_DEVCONF_REG |= USBT2WRMODEI(USB_BIDIR_TLL);
+		omap2_usb_devconf_set(2, USB_BIDIR_TLL);
 		break;
 	case 3:
 		syscon1 = 2;
 		if (cpu_is_omap24xx())
-			CONTROL_DEVCONF_REG |= USBT2WRMODEI(USB_BIDIR);
+			omap2_usb_devconf_set(2, USB_BIDIR);
 		break;
 	case 4:
 		syscon1 = 1;
 		if (cpu_is_omap24xx())
-			CONTROL_DEVCONF_REG |= USBT2WRMODEI(USB_BIDIR);
+			omap2_usb_devconf_set(2, USB_BIDIR);
 		break;
 	case 5:
 		if (!cpu_is_omap24xx())
@@ -364,8 +400,7 @@ static u32 __init omap_usb2_init(unsigned nwires, unsigned alt_pingroup)
 		 * set up OTG_SYSCON2.HMC_TLL{ATTACH,SPEED}
 		 */
 		syscon1 = 3;
-		CONTROL_DEVCONF_REG |= USBT2WRMODEI(USB_UNIDIR_TLL)
-					| USBT2TLL5PI;
+		omap2_usb2_enable_5pinunitll();
 		break;
 	case 6:
 		if (cpu_is_omap24xx())
diff --git a/arch/avr32/kernel/setup.c b/arch/avr32/kernel/setup.c
index e66a07a..2687b73 100644
--- a/arch/avr32/kernel/setup.c
+++ b/arch/avr32/kernel/setup.c
@@ -163,6 +163,7 @@ add_reserved_region(resource_size_t start, resource_size_t end,
 	new->start = start;
 	new->end = end;
 	new->name = name;
+	new->sibling = next;
 	new->flags = IORESOURCE_MEM;
 
 	*pprev = new;
diff --git a/arch/avr32/kernel/traps.c b/arch/avr32/kernel/traps.c
index cf6f686..b835c4c 100644
--- a/arch/avr32/kernel/traps.c
+++ b/arch/avr32/kernel/traps.c
@@ -178,6 +178,7 @@ static int do_cop_absent(u32 insn)
 	return 0;
 }
 
+#ifdef CONFIG_BUG
 int is_valid_bugaddr(unsigned long pc)
 {
 	unsigned short opcode;
@@ -189,6 +190,7 @@ int is_valid_bugaddr(unsigned long pc)
 
 	return opcode == AVR32_BUG_OPCODE;
 }
+#endif
 
 asmlinkage void do_illegal_opcode(unsigned long ecr, struct pt_regs *regs)
 {
@@ -197,6 +199,7 @@ asmlinkage void do_illegal_opcode(unsigned long ecr, struct pt_regs *regs)
 	void __user *pc;
 	long code;
 
+#ifdef CONFIG_BUG
 	if (!user_mode(regs) && (ecr == ECR_ILLEGAL_OPCODE)) {
 		enum bug_trap_type type;
 
@@ -211,6 +214,7 @@ asmlinkage void do_illegal_opcode(unsigned long ecr, struct pt_regs *regs)
 			die("Kernel BUG", regs, SIGKILL);
 		}
 	}
+#endif
 
 	local_irq_enable();
 
diff --git a/arch/frv/kernel/entry-table.S b/arch/frv/kernel/entry-table.S
index d3b9253..bf35f33 100644
--- a/arch/frv/kernel/entry-table.S
+++ b/arch/frv/kernel/entry-table.S
@@ -316,8 +316,14 @@ __trap_fixup_kernel_data_tlb_miss:
 	.section	.trap.vector
 	.org		TBR_TT_TRAP0 >> 2
 	.long		system_call
-	.rept		126
+	.rept		119
 	.long		__entry_unsupported_trap
 	.endr
+
+	# userspace atomic op emulation, traps 120-126
+	.rept		7
+	.long		__entry_atomic_op
+	.endr
+	
 	.org		TBR_TT_BREAK >> 2
 	.long		__entry_debug_exception
diff --git a/arch/frv/kernel/entry.S b/arch/frv/kernel/entry.S
index f36d7f4..b8a4b94 100644
--- a/arch/frv/kernel/entry.S
+++ b/arch/frv/kernel/entry.S
@@ -656,6 +656,26 @@ __entry_debug_exception:
 
 ###############################################################################
 #
+# handle atomic operation emulation for userspace
+#
+###############################################################################
+	.globl		__entry_atomic_op
+__entry_atomic_op:
+	LEDS		0x6012
+	sethi.p		%hi(atomic_operation),gr5
+	setlo		%lo(atomic_operation),gr5
+	movsg		esfr1,gr8
+	movsg		epcr0,gr9
+	movsg		esr0,gr10
+
+	# now that we've accessed the exception regs, we can enable exceptions
+	movsg		psr,gr4
+	ori		gr4,#PSR_ET,gr4
+	movgs		gr4,psr
+	jmpl		@(gr5,gr0)	; call atomic_operation(esfr1,epcr0,esr0)
+
+###############################################################################
+#
 # handle media exception
 #
 ###############################################################################
diff --git a/arch/frv/kernel/head.inc b/arch/frv/kernel/head.inc
index d424cd2..bff6662 100644
--- a/arch/frv/kernel/head.inc
+++ b/arch/frv/kernel/head.inc
@@ -46,5 +46,5 @@
 #ifdef CONFIG_MMU
 __sdram_base = 0x00000000		/* base address to which SDRAM relocated */
 #else
-__sdram_base = 0xc0000000		/* base address to which SDRAM relocated */
+__sdram_base = __page_offset		/* base address to which SDRAM relocated */
 #endif
diff --git a/arch/frv/kernel/switch_to.S b/arch/frv/kernel/switch_to.S
index b5275fa..b066686 100644
--- a/arch/frv/kernel/switch_to.S
+++ b/arch/frv/kernel/switch_to.S
@@ -102,13 +102,6 @@ __switch_to:
 	movgs		gr14,lr
 	bar
 
-	srli		gr15,#28,gr5
-	subicc		gr5,#0xc,gr0,icc0
-	beq		icc0,#0,111f
-	break
-	nop
-111:
-
 	# jump to __switch_back or ret_from_fork as appropriate
 	# - move prev to GR8
 	movgs		gr4,psr
diff --git a/arch/frv/kernel/traps.c b/arch/frv/kernel/traps.c
index 2e6098c..2f7e668 100644
--- a/arch/frv/kernel/traps.c
+++ b/arch/frv/kernel/traps.c
@@ -102,6 +102,233 @@ asmlinkage void illegal_instruction(unsigned long esfr1, unsigned long epcr0, un
 
 /*****************************************************************************/
 /*
+ * handle atomic operations with errors
+ * - arguments in gr8, gr9, gr10
+ * - original memory value placed in gr5
+ * - replacement memory value placed in gr9
+ */
+asmlinkage void atomic_operation(unsigned long esfr1, unsigned long epcr0,
+				 unsigned long esr0)
+{
+	static DEFINE_SPINLOCK(atomic_op_lock);
+	unsigned long x, y, z, *p;
+	mm_segment_t oldfs;
+	siginfo_t info;
+	int ret;
+
+	y = 0;
+	z = 0;
+
+	oldfs = get_fs();
+	if (!user_mode(__frame))
+		set_fs(KERNEL_DS);
+
+	switch (__frame->tbr & TBR_TT) {
+		/* TIRA gr0,#120
+		 * u32 __atomic_user_cmpxchg32(u32 *ptr, u32 test, u32 new)
+		 */
+	case TBR_TT_ATOMIC_CMPXCHG32:
+		p = (unsigned long *) __frame->gr8;
+		x = __frame->gr9;
+		y = __frame->gr10;
+
+		for (;;) {
+			ret = get_user(z, p);
+			if (ret < 0)
+				goto error;
+
+			if (z != x)
+				goto done;
+
+			spin_lock_irq(&atomic_op_lock);
+
+			if (__get_user(z, p) == 0) {
+				if (z != x)
+					goto done2;
+
+				if (__put_user(y, p) == 0)
+					goto done2;
+				goto error2;
+			}
+
+			spin_unlock_irq(&atomic_op_lock);
+		}
+
+		/* TIRA gr0,#121
+		 * u32 __atomic_kernel_xchg32(void *v, u32 new)
+		 */
+	case TBR_TT_ATOMIC_XCHG32:
+		p = (unsigned long *) __frame->gr8;
+		y = __frame->gr9;
+
+		for (;;) {
+			ret = get_user(z, p);
+			if (ret < 0)
+				goto error;
+
+			spin_lock_irq(&atomic_op_lock);
+
+			if (__get_user(z, p) == 0) {
+				if (__put_user(y, p) == 0)
+					goto done2;
+				goto error2;
+			}
+
+			spin_unlock_irq(&atomic_op_lock);
+		}
+
+		/* TIRA gr0,#122
+		 * ulong __atomic_kernel_XOR_return(ulong i, ulong *v)
+		 */
+	case TBR_TT_ATOMIC_XOR:
+		p = (unsigned long *) __frame->gr8;
+		x = __frame->gr9;
+
+		for (;;) {
+			ret = get_user(z, p);
+			if (ret < 0)
+				goto error;
+
+			spin_lock_irq(&atomic_op_lock);
+
+			if (__get_user(z, p) == 0) {
+				y = x ^ z;
+				if (__put_user(y, p) == 0)
+					goto done2;
+				goto error2;
+			}
+
+			spin_unlock_irq(&atomic_op_lock);
+		}
+
+		/* TIRA gr0,#123
+		 * ulong __atomic_kernel_OR_return(ulong i, ulong *v)
+		 */
+	case TBR_TT_ATOMIC_OR:
+		p = (unsigned long *) __frame->gr8;
+		x = __frame->gr9;
+
+		for (;;) {
+			ret = get_user(z, p);
+			if (ret < 0)
+				goto error;
+
+			spin_lock_irq(&atomic_op_lock);
+
+			if (__get_user(z, p) == 0) {
+				y = x ^ z;
+				if (__put_user(y, p) == 0)
+					goto done2;
+				goto error2;
+			}
+
+			spin_unlock_irq(&atomic_op_lock);
+		}
+
+		/* TIRA gr0,#124
+		 * ulong __atomic_kernel_AND_return(ulong i, ulong *v)
+		 */
+	case TBR_TT_ATOMIC_AND:
+		p = (unsigned long *) __frame->gr8;
+		x = __frame->gr9;
+
+		for (;;) {
+			ret = get_user(z, p);
+			if (ret < 0)
+				goto error;
+
+			spin_lock_irq(&atomic_op_lock);
+
+			if (__get_user(z, p) == 0) {
+				y = x & z;
+				if (__put_user(y, p) == 0)
+					goto done2;
+				goto error2;
+			}
+
+			spin_unlock_irq(&atomic_op_lock);
+		}
+
+		/* TIRA gr0,#125
+		 * int __atomic_user_sub_return(atomic_t *v, int i)
+		 */
+	case TBR_TT_ATOMIC_SUB:
+		p = (unsigned long *) __frame->gr8;
+		x = __frame->gr9;
+
+		for (;;) {
+			ret = get_user(z, p);
+			if (ret < 0)
+				goto error;
+
+			spin_lock_irq(&atomic_op_lock);
+
+			if (__get_user(z, p) == 0) {
+				y = z - x;
+				if (__put_user(y, p) == 0)
+					goto done2;
+				goto error2;
+			}
+
+			spin_unlock_irq(&atomic_op_lock);
+		}
+
+		/* TIRA gr0,#126
+		 * int __atomic_user_add_return(atomic_t *v, int i)
+		 */
+	case TBR_TT_ATOMIC_ADD:
+		p = (unsigned long *) __frame->gr8;
+		x = __frame->gr9;
+
+		for (;;) {
+			ret = get_user(z, p);
+			if (ret < 0)
+				goto error;
+
+			spin_lock_irq(&atomic_op_lock);
+
+			if (__get_user(z, p) == 0) {
+				y = z + x;
+				if (__put_user(y, p) == 0)
+					goto done2;
+				goto error2;
+			}
+
+			spin_unlock_irq(&atomic_op_lock);
+		}
+
+	default:
+		BUG();
+	}
+
+done2:
+	spin_unlock_irq(&atomic_op_lock);
+done:
+	if (!user_mode(__frame))
+		set_fs(oldfs);
+	__frame->gr5 = z;
+	__frame->gr9 = y;
+	return;
+
+error2:
+	spin_unlock_irq(&atomic_op_lock);
+error:
+	if (!user_mode(__frame))
+		set_fs(oldfs);
+	__frame->pc -= 4;
+
+	die_if_kernel("-- Atomic Op Error --\n");
+
+	info.si_signo	= SIGSEGV;
+	info.si_code	= SEGV_ACCERR;
+	info.si_errno	= 0;
+	info.si_addr	= (void *) __frame->pc;
+
+	force_sig_info(info.si_signo, &info, current);
+}
+
+/*****************************************************************************/
+/*
  *
  */
 asmlinkage void media_exception(unsigned long msr0, unsigned long msr1)
diff --git a/arch/m68k/Makefile b/arch/m68k/Makefile
index 2cba605..b15173f 100644
--- a/arch/m68k/Makefile
+++ b/arch/m68k/Makefile
@@ -13,6 +13,8 @@
 # Copyright (C) 1994 by Hamish Macdonald
 #
 
+KBUILD_DEFCONFIG := amiga_defconfig
+
 # override top level makefile
 AS += -m68020
 LDFLAGS := -m m68kelf
diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig
index 5649fba..e419583 100644
--- a/arch/m68k/configs/amiga_defconfig
+++ b/arch/m68k/configs/amiga_defconfig
@@ -1,63 +1,111 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun  7 20:34:23 2005
+# Linux kernel version: 2.6.25-rc8
+# Wed Apr  2 20:46:06 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
-CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_NO_IOPORT=y
+# CONFIG_NO_DMA is not set
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION="-amiga"
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform dependent setup
@@ -80,10 +128,24 @@ CONFIG_M68030=y
 CONFIG_M68040=y
 CONFIG_M68060=y
 CONFIG_MMU_MOTOROLA=y
-CONFIG_M68KFPU_EMU=y
-CONFIG_M68KFPU_EMU_EXTRAPREC=y
-# CONFIG_M68KFPU_EMU_ONLY is not set
+# CONFIG_M68KFPU_EMU is not set
 # CONFIG_ADVANCED is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=3
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
 
 #
 # General setup
@@ -97,47 +159,288 @@ CONFIG_AMIGA_PCMCIA=y
 CONFIG_PROC_HARDWARE=y
 CONFIG_ISA=y
 CONFIG_GENERIC_ISA_DMA=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_ZORRO_NAMES=y
 
 #
-# Device Drivers
+# Networking
 #
+CONFIG_NET=y
 
 #
-# Generic Driver Options
+# Networking options
 #
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
-# Memory Technology Devices (MTD)
+# IP: Netfilter Configuration
 #
-# CONFIG_MTD is not set
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+CONFIG_ATALK=m
+# CONFIG_DEV_APPLETALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
 
 #
-# Parallel port support
+# Network testing
 #
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+# CONFIG_MTD is not set
 CONFIG_PARPORT=m
 # CONFIG_PARPORT_PC is not set
-CONFIG_PARPORT_NOT_PC=y
 CONFIG_PARPORT_AMIGA=m
 CONFIG_PARPORT_MFC3=m
 # CONFIG_PARPORT_GSC is not set
+# CONFIG_PARPORT_AX88796 is not set
 CONFIG_PARPORT_1284=y
-
-#
-# Plug and Play support
-#
+CONFIG_PARPORT_NOT_PC=y
 # CONFIG_PNP is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 CONFIG_AMIGA_FLOPPY=y
 CONFIG_AMIGA_Z2RAM=y
-# CONFIG_PARIDE is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
@@ -145,56 +448,66 @@ CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_BLK_DEV_XIP is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
 CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDETAPE=m
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
+# CONFIG_BLK_DEV_IDETAPE is not set
 CONFIG_BLK_DEV_IDEFLOPPY=m
 # CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
 
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_GAYLE=y
 CONFIG_BLK_DEV_IDEDOUBLER=y
 CONFIG_BLK_DEV_BUDDHA=y
-# CONFIG_IDE_CHIPSETS is not set
+
+#
+# Other IDE chipsets support
+#
+
+#
+# Note: most of these also require special kernel boot parameters
+#
+# CONFIG_BLK_DEV_4DRIVES is not set
+# CONFIG_BLK_DEV_ALI14XX is not set
+# CONFIG_BLK_DEV_DTC2278 is not set
+# CONFIG_BLK_DEV_HT6560B is not set
+# CONFIG_BLK_DEV_QD65XX is not set
+# CONFIG_BLK_DEV_UMC8672 is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_IDE_ARCH_OBSOLETE_INIT is not set
 # CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=m
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
 
 #
@@ -206,6 +519,7 @@ CONFIG_CHR_DEV_OSST=m
 CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
 
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -213,30 +527,34 @@ CONFIG_CHR_DEV_SG=m
 # CONFIG_SCSI_MULTI_LUN is not set
 CONFIG_SCSI_CONSTANTS=y
 # CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
-# SCSI Transport Attributes
+# SCSI Transports
 #
-# CONFIG_SCSI_SPI_ATTRS is not set
+CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_AHA152X is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_DTC3280 is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_GENERIC_NCR5380 is not set
 # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
 # CONFIG_SCSI_NCR53C406A is not set
+CONFIG_53C700_BE_BUS=y
 # CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
 # CONFIG_SCSI_QLOGIC_FAS is not set
 # CONFIG_SCSI_SYM53C416 is not set
 # CONFIG_SCSI_T128 is not set
@@ -244,243 +562,42 @@ CONFIG_SCSI_CONSTANTS=y
 CONFIG_A3000_SCSI=y
 CONFIG_A2091_SCSI=y
 CONFIG_GVP11_SCSI=y
-CONFIG_CYBERSTORM_SCSI=y
-CONFIG_CYBERSTORMII_SCSI=y
-CONFIG_BLZ2060_SCSI=y
-CONFIG_BLZ1230_SCSI=y
-CONFIG_FASTLANE_SCSI=y
-CONFIG_OKTAGON_SCSI=y
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+CONFIG_SCSI_A4000T=y
+CONFIG_SCSI_ZORRO7XX=y
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
 CONFIG_MD_RAID0=m
 CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
 CONFIG_MD_MULTIPATH=m
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
 CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
 CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
-CONFIG_ATALK=m
-# CONFIG_DEV_APPLETALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
 CONFIG_EQUALIZER=m
 # CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+CONFIG_VETH=m
 # CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
+# CONFIG_MII is not set
 CONFIG_ARIADNE=m
 CONFIG_A2065=m
 CONFIG_HYDRA=m
@@ -493,32 +610,24 @@ CONFIG_APNE=m
 # CONFIG_DEPCA is not set
 # CONFIG_HP100 is not set
 # CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
 # CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
 #
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 # CONFIG_WAN is not set
-CONFIG_PLIP=m
+# CONFIG_PLIP is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
 CONFIG_PPP_FILTER=y
@@ -526,28 +635,28 @@ CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
 CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -557,7 +666,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -570,6 +678,7 @@ CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_AMIGA=y
 CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
@@ -577,7 +686,7 @@ CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_INPORT is not set
 # CONFIG_MOUSE_LOGIBM is not set
 # CONFIG_MOUSE_PC110PAD is not set
-CONFIG_MOUSE_AMIGA=y
+CONFIG_MOUSE_AMIGA=m
 # CONFIG_MOUSE_VSXXXAA is not set
 CONFIG_INPUT_JOYSTICK=y
 # CONFIG_JOYSTICK_ANALOG is not set
@@ -603,16 +712,16 @@ CONFIG_INPUT_JOYSTICK=y
 # CONFIG_JOYSTICK_TURBOGRAFX is not set
 CONFIG_JOYSTICK_AMIGA=m
 # CONFIG_JOYSTICK_JOYDUMP is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_M68K_BEEP=m
+# CONFIG_INPUT_UINPUT is not set
 
 #
 # Hardware I/O ports
 #
-CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -621,6 +730,7 @@ CONFIG_SERIO_SERPORT=m
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 CONFIG_A2232=m
 
@@ -638,94 +748,102 @@ CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_PRINTER=m
 # CONFIG_LP_CONSOLE is not set
 # CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 CONFIG_GEN_RTC=m
 CONFIG_GEN_RTC_X=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
+# CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 
 #
-# Dallas's 1-wire bus
+# SPI support
 #
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Misc devices
+# Sonics Silicon Backplane
 #
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# Multimedia devices
+# Multifunction device drivers
 #
-# CONFIG_VIDEO_DEV is not set
+# CONFIG_MFD_SM501 is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia devices
 #
-# CONFIG_DVB is not set
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
-CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
-CONFIG_FB_CIRRUS=m
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_CIRRUS=y
 CONFIG_FB_AMIGA=y
 CONFIG_FB_AMIGA_OCS=y
 CONFIG_FB_AMIGA_ECS=y
 CONFIG_FB_AMIGA_AGA=y
 CONFIG_FB_FM2=y
+# CONFIG_FB_UVESA is not set
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 # CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
 CONFIG_FONT_PEARL_8x8=y
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -733,27 +851,21 @@ CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
 CONFIG_DMASOUND_PAULA=m
 CONFIG_DMASOUND=m
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_AUXDISPLAY is not set
 
 #
-# InfiniBand support
+# Userspace I/O
 #
-# CONFIG_INFINIBAND is not set
+# CONFIG_UIO is not set
 
 #
 # Character devices
@@ -768,10 +880,11 @@ CONFIG_MULTIFACE_III_TTY=m
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
@@ -782,25 +895,29 @@ CONFIG_JFS_FS=m
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+# CONFIG_XFS_RT is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_NOLOCK=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -808,7 +925,6 @@ CONFIG_AUTOFS4_FS=m
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
 CONFIG_UDF_FS=m
 CONFIG_UDF_NLS=y
 
@@ -827,19 +943,18 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
 #
 # CONFIG_ADFS_FS is not set
-CONFIG_AFFS_FS=y
+CONFIG_AFFS_FS=m
 CONFIG_HFS_FS=m
 CONFIG_HFSPLUS_FS=m
 # CONFIG_BEFS_FS is not set
@@ -847,43 +962,39 @@ CONFIG_HFSPLUS_FS=m
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
-
-#
-# Network File Systems
-#
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
 CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
+CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
 CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-CONFIG_NCPFS_NFS_NS=y
-CONFIG_NCPFS_OS2_NS=y
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
 # CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
@@ -894,10 +1005,6 @@ CONFIG_CODA_FS=m
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_AMIGA_PARTITION=y
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -938,35 +1045,42 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=m
@@ -975,9 +1089,21 @@ CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
@@ -986,20 +1112,35 @@ CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig
index 63024b0..e61196c 100644
--- a/arch/m68k/configs/apollo_defconfig
+++ b/arch/m68k/configs/apollo_defconfig
@@ -1,63 +1,111 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun  7 20:34:27 2005
+# Linux kernel version: 2.6.25-rc8
+# Wed Apr  2 20:46:07 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
-CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_NO_IOPORT=y
+# CONFIG_NO_DMA is not set
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION="-apollo"
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform dependent setup
@@ -80,10 +128,24 @@ CONFIG_M68030=y
 CONFIG_M68040=y
 CONFIG_M68060=y
 CONFIG_MMU_MOTOROLA=y
-CONFIG_M68KFPU_EMU=y
-CONFIG_M68KFPU_EMU_EXTRAPREC=y
-# CONFIG_M68KFPU_EMU_ONLY is not set
+# CONFIG_M68KFPU_EMU is not set
 # CONFIG_ADVANCED is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=3
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
 
 #
 # General setup
@@ -93,134 +155,11 @@ CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
 CONFIG_HEARTBEAT=y
 CONFIG_PROC_HARDWARE=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
+# Networking
 #
 CONFIG_NET=y
 
@@ -230,10 +169,17 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
@@ -245,145 +191,199 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IP_VS is not set
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
 CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
 # IP: Netfilter Configuration
 #
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
 CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
 #
+CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_FRAG=m
 CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
 
 #
-# SCTP Configuration (EXPERIMENTAL)
+# DCCP CCIDs Configuration (EXPERIMENTAL)
 #
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
 # CONFIG_SCTP_HMAC_NONE is not set
 # CONFIG_SCTP_HMAC_SHA1 is not set
 CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
 # CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
+# CONFIG_IPX is not set
 CONFIG_ATALK=m
 # CONFIG_DEV_APPLETALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
 
@@ -391,46 +391,154 @@ CONFIG_NET_CLS_ROUTE=y
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-CONFIG_EQUALIZER=m
-# CONFIG_TUN is not set
+# CONFIG_AF_RXRPC is not set
 
 #
-# Ethernet (10 or 100Mbit)
+# Wireless
 #
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-CONFIG_APOLLO_ELPLUS=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
-# Ethernet (1000 Mbit)
+# Device Drivers
 #
 
 #
-# Ethernet (10000 Mbit)
+# Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
 
 #
-# Token Ring devices
+# SCSI device support
 #
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
 
 #
-# Wireless LAN (non-hamradio)
+# SCSI support type (disk, tape, CD-ROM)
 #
-# CONFIG_NET_RADIO is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
+CONFIG_EQUALIZER=m
+# CONFIG_TUN is not set
+CONFIG_VETH=m
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_APOLLO_ELPLUS=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
-# Wan interfaces
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -439,28 +547,28 @@ CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
 CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -470,7 +578,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -483,11 +590,19 @@ CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=m
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -495,7 +610,7 @@ CONFIG_MOUSE_SERIAL=m
 # Hardware I/O ports
 #
 CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
+# CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_LIBPS2=m
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
@@ -506,6 +621,7 @@ CONFIG_SERIO_LIBPS2=m
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -519,90 +635,114 @@ CONFIG_HW_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_GEN_RTC=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_GEN_RTC=m
 CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
 
 #
-# TPM devices
+# SPI support
 #
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# I2C support
+# Sonics Silicon Backplane
 #
-# CONFIG_I2C is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# Dallas's 1-wire bus
+# Multifunction device drivers
 #
-# CONFIG_W1 is not set
+# CONFIG_MFD_SM501 is not set
 
 #
-# Misc devices
+# Multimedia devices
 #
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
-# Multimedia devices
+# Graphics support
 #
-# CONFIG_VIDEO_DEV is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+# CONFIG_FB_CFB_COPYAREA is not set
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
 
 #
-# Digital Video Broadcasting Devices
+# Frame buffer hardware drivers
 #
-# CONFIG_DVB is not set
+CONFIG_FB_APOLLO=y
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Graphics support
+# Display device support
 #
-# CONFIG_FB is not set
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
 
 #
-# InfiniBand support
+# Userspace I/O
 #
-# CONFIG_INFINIBAND is not set
+# CONFIG_UIO is not set
 
 #
 # Character devices
@@ -615,10 +755,11 @@ CONFIG_SERIAL_CONSOLE=y
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
@@ -629,25 +770,29 @@ CONFIG_JFS_FS=m
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+# CONFIG_XFS_RT is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_NOLOCK=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -655,7 +800,6 @@ CONFIG_AUTOFS4_FS=m
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
 CONFIG_UDF_FS=m
 CONFIG_UDF_NLS=y
 
@@ -674,13 +818,12 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -694,44 +837,40 @@ CONFIG_HFSPLUS_FS=m
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
-
-#
-# Network File Systems
-#
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
 CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
 CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-CONFIG_NCPFS_NFS_NS=y
-CONFIG_NCPFS_OS2_NS=y
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
 # CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
@@ -741,10 +880,6 @@ CONFIG_CODA_FS=m
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -785,35 +920,42 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
@@ -822,9 +964,21 @@ CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
@@ -833,20 +987,35 @@ CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig
index 6433da2..ba7f971 100644
--- a/arch/m68k/configs/atari_defconfig
+++ b/arch/m68k/configs/atari_defconfig
@@ -1,63 +1,111 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun  7 20:34:32 2005
+# Linux kernel version: 2.6.25-rc8
+# Wed Apr  2 20:46:09 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
-CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_NO_IOPORT=y
+# CONFIG_NO_DMA is not set
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION="-atari"
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform dependent setup
@@ -80,10 +128,24 @@ CONFIG_M68030=y
 CONFIG_M68040=y
 CONFIG_M68060=y
 CONFIG_MMU_MOTOROLA=y
-CONFIG_M68KFPU_EMU=y
-CONFIG_M68KFPU_EMU_EXTRAPREC=y
-# CONFIG_M68KFPU_EMU_ONLY is not set
+# CONFIG_M68KFPU_EMU is not set
 # CONFIG_ADVANCED is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=3
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
 
 #
 # General setup
@@ -94,166 +156,11 @@ CONFIG_BINFMT_MISC=m
 CONFIG_STRAM_PROC=y
 CONFIG_HEARTBEAT=y
 CONFIG_PROC_HARDWARE=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-CONFIG_PARPORT=m
-# CONFIG_PARPORT_PC is not set
-CONFIG_PARPORT_NOT_PC=y
-CONFIG_PARPORT_ATARI=m
-# CONFIG_PARPORT_GSC is not set
-CONFIG_PARPORT_1284=y
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-CONFIG_ATARI_FLOPPY=y
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDETAPE=m
-CONFIG_BLK_DEV_IDEFLOPPY=m
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_FALCON_IDE=y
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
+# Networking
 #
 CONFIG_NET=y
 
@@ -263,10 +170,17 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 # CONFIG_IP_PNP is not set
 CONFIG_NET_IPIP=m
 CONFIG_NET_IPGRE=m
@@ -275,145 +189,199 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IP_VS is not set
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
 CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
 # IP: Netfilter Configuration
 #
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
 CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
 #
+CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_FRAG=m
 CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
 
 #
-# SCTP Configuration (EXPERIMENTAL)
+# DCCP CCIDs Configuration (EXPERIMENTAL)
 #
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
 # CONFIG_SCTP_HMAC_NONE is not set
 # CONFIG_SCTP_HMAC_SHA1 is not set
 CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
 # CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
+# CONFIG_IPX is not set
 CONFIG_ATALK=m
 # CONFIG_DEV_APPLETALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
 
@@ -421,46 +389,189 @@ CONFIG_NET_CLS_ROUTE=y
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-CONFIG_EQUALIZER=m
-# CONFIG_TUN is not set
+# CONFIG_AF_RXRPC is not set
 
 #
-# Ethernet (10 or 100Mbit)
+# Wireless
 #
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-CONFIG_ATARILANCE=m
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+# CONFIG_MTD is not set
+CONFIG_PARPORT=m
+CONFIG_PARPORT_ATARI=m
+# CONFIG_PARPORT_GSC is not set
+# CONFIG_PARPORT_AX88796 is not set
+CONFIG_PARPORT_1284=y
+CONFIG_PARPORT_NOT_PC=y
+CONFIG_BLK_DEV=y
+CONFIG_ATARI_FLOPPY=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+CONFIG_BLK_DEV_IDEFLOPPY=m
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
 
 #
-# Ethernet (1000 Mbit)
+# IDE chipset support/bugfixes
 #
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_FALCON_IDE=y
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDE_ARCH_OBSOLETE_INIT is not set
+# CONFIG_BLK_DEV_HD is not set
 
 #
-# Ethernet (10000 Mbit)
+# SCSI device support
 #
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
 
 #
-# Token Ring devices
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
 #
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
-# Wireless LAN (non-hamradio)
+# SCSI Transports
 #
-# CONFIG_NET_RADIO is not set
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_ATARI_SCSI=y
+# CONFIG_ATARI_SCSI_TOSHIBA_DELAY is not set
+# CONFIG_ATARI_SCSI_RESET_BOOT is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
+CONFIG_EQUALIZER=m
+# CONFIG_TUN is not set
+CONFIG_VETH=m
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+CONFIG_ATARILANCE=m
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NET_POCKET is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
-# Wan interfaces
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 # CONFIG_WAN is not set
 # CONFIG_PLIP is not set
 CONFIG_PPP=m
@@ -470,28 +581,28 @@ CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
 CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -501,7 +612,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -509,26 +619,37 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_ATKBD is not set
 # CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_ATARI_KBD_CORE=y
+CONFIG_KEYBOARD_ATARI=y
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
+CONFIG_MOUSE_ATARI=m
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_M68K_BEEP=m
-CONFIG_INPUT_UINPUT=m
+# CONFIG_INPUT_UINPUT is not set
 
 #
 # Hardware I/O ports
 #
 CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_SERPORT is not set
 # CONFIG_SERIO_PARKBD is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
@@ -540,6 +661,7 @@ CONFIG_SERIO_LIBPS2=y
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -556,86 +678,97 @@ CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_PRINTER=m
 # CONFIG_LP_CONSOLE is not set
 # CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 CONFIG_NVRAM=y
-CONFIG_GEN_RTC=y
+CONFIG_GEN_RTC=m
 CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
+# CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 
 #
-# Dallas's 1-wire bus
+# SPI support
 #
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Misc devices
+# Sonics Silicon Backplane
 #
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# Multimedia devices
+# Multifunction device drivers
 #
-# CONFIG_VIDEO_DEV is not set
+# CONFIG_MFD_SM501 is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia devices
 #
-# CONFIG_DVB is not set
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
-CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_ATY is not set
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_ATARI=y
+# CONFIG_FB_UVESA is not set
 # CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_ATY is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 # CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
 
 #
 # Sound
@@ -643,27 +776,21 @@ CONFIG_FONT_8x16=y
 CONFIG_SOUND=m
 CONFIG_DMASOUND_ATARI=m
 CONFIG_DMASOUND=m
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_AUXDISPLAY is not set
 
 #
-# InfiniBand support
+# Userspace I/O
 #
-# CONFIG_INFINIBAND is not set
+# CONFIG_UIO is not set
 
 #
 # Character devices
@@ -680,38 +807,44 @@ CONFIG_ATARI_DSP56K=m
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
-CONFIG_REISERFS_PROC_INFO=y
+# CONFIG_REISERFS_PROC_INFO is not set
 # CONFIG_REISERFS_FS_XATTR is not set
 CONFIG_JFS_FS=m
 # CONFIG_JFS_POSIX_ACL is not set
 # CONFIG_JFS_SECURITY is not set
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
-
-#
-# XFS support
-#
+CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+# CONFIG_XFS_RT is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_NOLOCK=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -719,7 +852,6 @@ CONFIG_AUTOFS4_FS=m
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
 CONFIG_UDF_FS=m
 CONFIG_UDF_NLS=y
 
@@ -738,13 +870,12 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -758,42 +889,38 @@ CONFIG_HFSPLUS_FS=m
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
-
-#
-# Network File Systems
-#
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
 CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
+CONFIG_SUNRPC_BIND34=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
 CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-CONFIG_NCPFS_NFS_NS=y
-CONFIG_NCPFS_OS2_NS=y
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
 # CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
@@ -804,10 +931,6 @@ CONFIG_CODA_FS=m
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_ATARI_PARTITION=y
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -848,35 +971,42 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=m
@@ -885,9 +1015,21 @@ CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
@@ -896,20 +1038,35 @@ CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig
index da2a23a..ed98eff 100644
--- a/arch/m68k/configs/bvme6000_defconfig
+++ b/arch/m68k/configs/bvme6000_defconfig
@@ -1,63 +1,111 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun  7 20:34:37 2005
+# Linux kernel version: 2.6.25-rc8
+# Wed Apr  2 20:46:10 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
-CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_NO_IOPORT=y
+# CONFIG_NO_DMA is not set
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION="-bvme6000"
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform dependent setup
@@ -85,6 +133,22 @@ CONFIG_M68060=y
 CONFIG_MMU_MOTOROLA=y
 # CONFIG_M68KFPU_EMU is not set
 # CONFIG_ADVANCED is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=3
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
 
 #
 # General setup
@@ -93,134 +157,11 @@ CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
 CONFIG_PROC_HARDWARE=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
+# Networking
 #
 CONFIG_NET=y
 
@@ -230,10 +171,17 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
@@ -245,126 +193,186 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IP_VS is not set
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
 CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
 # IP: Netfilter Configuration
 #
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
 CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
 #
+CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_FRAG=m
 CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
 
 #
-# SCTP Configuration (EXPERIMENTAL)
+# DCCP CCIDs Configuration (EXPERIMENTAL)
 #
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
 # CONFIG_SCTP_HMAC_NONE is not set
 # CONFIG_SCTP_HMAC_SHA1 is not set
 CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -376,13 +384,8 @@ CONFIG_ATALK=m
 # CONFIG_DEV_APPLETALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
 
@@ -390,76 +393,186 @@ CONFIG_NET_CLS_ROUTE=y
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-CONFIG_EQUALIZER=m
-# CONFIG_TUN is not set
+# CONFIG_AF_RXRPC is not set
 
 #
-# Ethernet (10 or 100Mbit)
+# Wireless
 #
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-CONFIG_BVME6000_NET=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
-# Ethernet (1000 Mbit)
+# Device Drivers
 #
 
 #
-# Ethernet (10000 Mbit)
+# Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
 
 #
-# Token Ring devices
+# SCSI device support
 #
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
 
 #
-# Wireless LAN (non-hamradio)
+# SCSI support type (disk, tape, CD-ROM)
 #
-# CONFIG_NET_RADIO is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+CONFIG_53C700_BE_BUS=y
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_BVME6000_SCSI=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
+CONFIG_EQUALIZER=m
+# CONFIG_TUN is not set
+CONFIG_VETH=m
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_BVME6000_NET=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
-# Wan interfaces
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_FILTER=y
 CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
 CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -469,7 +582,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -482,11 +594,19 @@ CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=m
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -494,7 +614,7 @@ CONFIG_MOUSE_SERIAL=m
 # Hardware I/O ports
 #
 CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
+# CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_LIBPS2=m
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
@@ -505,6 +625,7 @@ CONFIG_SERIO_LIBPS2=m
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -518,59 +639,56 @@ CONFIG_HW_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 CONFIG_GEN_RTC=m
 CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
 
 #
-# TPM devices
-#
-
-#
-# I2C support
+# SPI support
 #
-# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Dallas's 1-wire bus
+# Sonics Silicon Backplane
 #
-# CONFIG_W1 is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# Misc devices
+# Multifunction device drivers
 #
+# CONFIG_MFD_SM501 is not set
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
-# Digital Video Broadcasting Devices
+# Graphics support
 #
-# CONFIG_DVB is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Graphics support
+# Display device support
 #
-# CONFIG_FB is not set
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
@@ -581,27 +699,20 @@ CONFIG_DUMMY_CONSOLE=y
 # Sound
 #
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
 
 #
-# InfiniBand support
+# Userspace I/O
 #
-# CONFIG_INFINIBAND is not set
+# CONFIG_UIO is not set
 
 #
 # Character devices
@@ -614,10 +725,11 @@ CONFIG_SERIAL_CONSOLE=y
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
@@ -628,25 +740,29 @@ CONFIG_JFS_FS=m
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+# CONFIG_XFS_RT is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_NOLOCK=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -654,7 +770,6 @@ CONFIG_AUTOFS4_FS=m
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
 CONFIG_UDF_FS=m
 CONFIG_UDF_NLS=y
 
@@ -673,13 +788,12 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -693,44 +807,40 @@ CONFIG_HFSPLUS_FS=m
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
-
-#
-# Network File Systems
-#
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
 CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
 CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-CONFIG_NCPFS_NFS_NS=y
-CONFIG_NCPFS_OS2_NS=y
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
 # CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
@@ -740,10 +850,7 @@ CONFIG_CODA_FS=m
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
+CONFIG_SYSV68_PARTITION=y
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -784,35 +891,42 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
@@ -821,9 +935,21 @@ CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
@@ -832,20 +958,35 @@ CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=m
 CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=m
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig
index 5125188..38b68c7 100644
--- a/arch/m68k/configs/hp300_defconfig
+++ b/arch/m68k/configs/hp300_defconfig
@@ -1,63 +1,111 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun  7 20:34:41 2005
+# Linux kernel version: 2.6.25-rc8
+# Wed Apr  2 20:46:12 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
-CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_NO_IOPORT=y
+# CONFIG_NO_DMA is not set
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION="-hp300"
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform dependent setup
@@ -81,10 +129,24 @@ CONFIG_M68030=y
 CONFIG_M68040=y
 CONFIG_M68060=y
 CONFIG_MMU_MOTOROLA=y
-CONFIG_M68KFPU_EMU=y
-CONFIG_M68KFPU_EMU_EXTRAPREC=y
-# CONFIG_M68KFPU_EMU_ONLY is not set
+# CONFIG_M68KFPU_EMU is not set
 # CONFIG_ADVANCED is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=3
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
 
 #
 # General setup
@@ -94,134 +156,11 @@ CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
 CONFIG_HEARTBEAT=y
 CONFIG_PROC_HARDWARE=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
+# Networking
 #
 CONFIG_NET=y
 
@@ -231,10 +170,17 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
@@ -246,145 +192,199 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IP_VS is not set
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
 CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
 # IP: Netfilter Configuration
 #
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
 CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
 #
+CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_FRAG=m
 CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
 
 #
-# SCTP Configuration (EXPERIMENTAL)
+# DCCP CCIDs Configuration (EXPERIMENTAL)
 #
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
 # CONFIG_SCTP_HMAC_NONE is not set
 # CONFIG_SCTP_HMAC_SHA1 is not set
 CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
 # CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
+# CONFIG_IPX is not set
 CONFIG_ATALK=m
 # CONFIG_DEV_APPLETALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
 
@@ -392,46 +392,154 @@ CONFIG_NET_CLS_ROUTE=y
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-CONFIG_EQUALIZER=m
-# CONFIG_TUN is not set
+# CONFIG_AF_RXRPC is not set
 
 #
-# Ethernet (10 or 100Mbit)
+# Wireless
 #
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-CONFIG_HPLANCE=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
-# Ethernet (1000 Mbit)
+# Device Drivers
 #
 
 #
-# Ethernet (10000 Mbit)
+# Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
 
 #
-# Token Ring devices
+# SCSI device support
 #
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
 
 #
-# Wireless LAN (non-hamradio)
+# SCSI support type (disk, tape, CD-ROM)
 #
-# CONFIG_NET_RADIO is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
+CONFIG_EQUALIZER=m
+# CONFIG_TUN is not set
+CONFIG_VETH=m
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_HPLANCE=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
-# Wan interfaces
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -440,28 +548,28 @@ CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
 CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -471,7 +579,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -484,19 +591,35 @@ CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_HIL_OLD=y
+CONFIG_KEYBOARD_HIL=y
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=m
 # CONFIG_MOUSE_VSXXXAA is not set
+CONFIG_MOUSE_HIL=m
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_M68K_BEEP is not set
+# CONFIG_INPUT_UINPUT is not set
+CONFIG_HP_SDC_RTC=m
 
 #
 # Hardware I/O ports
 #
-CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_HP_SDC=y
+CONFIG_HIL_MLC=y
 CONFIG_SERIO_LIBPS2=m
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
@@ -507,6 +630,7 @@ CONFIG_SERIO_LIBPS2=m
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -520,90 +644,114 @@ CONFIG_HW_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_GEN_RTC=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_GEN_RTC=m
 CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
 
 #
-# TPM devices
+# SPI support
 #
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# I2C support
+# Sonics Silicon Backplane
 #
-# CONFIG_I2C is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# Dallas's 1-wire bus
+# Multifunction device drivers
 #
-# CONFIG_W1 is not set
+# CONFIG_MFD_SM501 is not set
 
 #
-# Misc devices
+# Multimedia devices
 #
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
-# Multimedia devices
+# Graphics support
 #
-# CONFIG_VIDEO_DEV is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+# CONFIG_FB_CFB_COPYAREA is not set
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
 
 #
-# Digital Video Broadcasting Devices
+# Frame buffer hardware drivers
 #
-# CONFIG_DVB is not set
+CONFIG_FB_HP300=y
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Graphics support
+# Display device support
 #
-# CONFIG_FB is not set
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
 
 #
-# InfiniBand support
+# Userspace I/O
 #
-# CONFIG_INFINIBAND is not set
+# CONFIG_UIO is not set
 
 #
 # Character devices
@@ -614,10 +762,11 @@ CONFIG_DUMMY_CONSOLE=y
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
@@ -628,25 +777,29 @@ CONFIG_JFS_FS=m
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+# CONFIG_XFS_RT is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_NOLOCK=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -654,7 +807,6 @@ CONFIG_AUTOFS4_FS=m
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
 CONFIG_UDF_FS=m
 CONFIG_UDF_NLS=y
 
@@ -673,13 +825,12 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -693,44 +844,40 @@ CONFIG_HFSPLUS_FS=m
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
-
-#
-# Network File Systems
-#
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
 CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
 CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-CONFIG_NCPFS_NFS_NS=y
-CONFIG_NCPFS_OS2_NS=y
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
 # CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
@@ -740,10 +887,6 @@ CONFIG_CODA_FS=m
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -784,35 +927,42 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
@@ -821,9 +971,21 @@ CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
@@ -832,20 +994,35 @@ CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig
index ff9dffa..738bca6 100644
--- a/arch/m68k/configs/mac_defconfig
+++ b/arch/m68k/configs/mac_defconfig
@@ -1,63 +1,111 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun  7 20:34:45 2005
+# Linux kernel version: 2.6.25-rc8
+# Wed Apr  2 20:46:14 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
-CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_NO_IOPORT=y
+# CONFIG_NO_DMA is not set
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION="-mac"
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform dependent setup
@@ -82,10 +130,24 @@ CONFIG_M68030=y
 CONFIG_M68040=y
 # CONFIG_M68060 is not set
 CONFIG_MMU_MOTOROLA=y
-CONFIG_M68KFPU_EMU=y
-CONFIG_M68KFPU_EMU_EXTRAPREC=y
-# CONFIG_M68KFPU_EMU_ONLY is not set
+# CONFIG_M68KFPU_EMU is not set
 # CONFIG_ADVANCED is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=3
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
 
 #
 # General setup
@@ -95,171 +157,11 @@ CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
 # CONFIG_HEARTBEAT is not set
 CONFIG_PROC_HARDWARE=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDETAPE=m
-CONFIG_BLK_DEV_IDEFLOPPY=m
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_MAC_IDE=y
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-CONFIG_MAC_SCSI=y
-CONFIG_SCSI_MAC_ESP=y
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Macintosh device drivers
-#
-CONFIG_ADB=y
-CONFIG_ADB_MACII=y
-CONFIG_ADB_MACIISI=y
-CONFIG_ADB_IOP=y
-CONFIG_ADB_PMU68K=y
-CONFIG_ADB_CUDA=y
-CONFIG_INPUT_ADBHID=y
-CONFIG_MAC_EMUMOUSEBTN=y
-
-#
-# Networking support
+# Networking
 #
 CONFIG_NET=y
 
@@ -269,10 +171,17 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 # CONFIG_IP_PNP is not set
 CONFIG_NET_IPIP=m
 CONFIG_NET_IPGRE=m
@@ -281,148 +190,202 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IP_VS is not set
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
 CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
 # IP: Netfilter Configuration
 #
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
 CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
 #
+CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_FRAG=m
 CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
 
 #
-# SCTP Configuration (EXPERIMENTAL)
+# DCCP CCIDs Configuration (EXPERIMENTAL)
 #
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
 # CONFIG_SCTP_HMAC_NONE is not set
 # CONFIG_SCTP_HMAC_SHA1 is not set
 CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
 # CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
+# CONFIG_IPX is not set
 CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=y
+CONFIG_DEV_APPLETALK=m
 CONFIG_IPDDP=m
 CONFIG_IPDDP_ENCAP=y
 CONFIG_IPDDP_DECAP=y
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
 
@@ -430,80 +393,223 @@ CONFIG_NET_CLS_ROUTE=y
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-CONFIG_EQUALIZER=m
-# CONFIG_TUN is not set
+# CONFIG_AF_RXRPC is not set
 
 #
-# Ethernet (10 or 100Mbit)
+# Wireless
 #
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-CONFIG_MAC8390=y
-CONFIG_MAC89x0=y
-CONFIG_MACSONIC=y
-CONFIG_MACMACE=y
-# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
 
 #
-# Ethernet (1000 Mbit)
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+CONFIG_BLK_DEV_IDEFLOPPY=m
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
 #
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_MAC_IDE=y
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDE_ARCH_OBSOLETE_INIT is not set
+# CONFIG_BLK_DEV_HD is not set
 
 #
-# Ethernet (10000 Mbit)
+# SCSI device support
 #
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
 
 #
-# Token Ring devices
+# SCSI support type (disk, tape, CD-ROM)
 #
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
 
 #
-# Wireless LAN (non-hamradio)
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
 #
-# CONFIG_NET_RADIO is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
-# Wan interfaces
+# SCSI Transports
 #
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_MAC_SCSI=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_MACINTOSH_DRIVERS=y
+CONFIG_ADB=y
+CONFIG_ADB_MACII=y
+CONFIG_ADB_MACIISI=y
+CONFIG_ADB_IOP=y
+CONFIG_ADB_PMU68K=y
+CONFIG_ADB_CUDA=y
+CONFIG_INPUT_ADBHID=y
+CONFIG_MAC_EMUMOUSEBTN=y
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
+CONFIG_EQUALIZER=m
+# CONFIG_TUN is not set
+CONFIG_VETH=m
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_MAC8390=y
+CONFIG_MAC89x0=m
+CONFIG_MACSONIC=m
+CONFIG_MACMACE=y
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
 CONFIG_PPP_FILTER=y
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
 CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -513,7 +619,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -526,19 +631,29 @@ CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=m
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_M68K_BEEP=m
+# CONFIG_INPUT_UINPUT is not set
 
 #
 # Hardware I/O ports
 #
 CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
+# CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_LIBPS2=m
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
@@ -549,6 +664,7 @@ CONFIG_SERIO_LIBPS2=m
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -562,116 +678,117 @@ CONFIG_HW_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 CONFIG_GEN_RTC=m
 CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
+# CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 
 #
-# Dallas's 1-wire bus
+# SPI support
 #
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Misc devices
+# Sonics Silicon Backplane
 #
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# Multimedia devices
+# Multifunction device drivers
 #
-# CONFIG_VIDEO_DEV is not set
+# CONFIG_MFD_SM501 is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia devices
 #
-# CONFIG_DVB is not set
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
 CONFIG_FB_MACMODES=y
-CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
 CONFIG_FB_VALKYRIE=y
 CONFIG_FB_MAC=y
+# CONFIG_FB_UVESA is not set
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 # CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
 CONFIG_FONT_6x11=y
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_LOGO_MAC_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
 
 #
-# InfiniBand support
+# Userspace I/O
 #
-# CONFIG_INFINIBAND is not set
+# CONFIG_UIO is not set
 
 #
 # Character devices
@@ -685,10 +802,11 @@ CONFIG_SERIAL_CONSOLE=y
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
@@ -699,25 +817,29 @@ CONFIG_JFS_FS=m
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+# CONFIG_XFS_RT is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_NOLOCK=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -725,7 +847,6 @@ CONFIG_AUTOFS4_FS=m
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
 CONFIG_UDF_FS=m
 CONFIG_UDF_NLS=y
 
@@ -744,13 +865,12 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -764,43 +884,39 @@ CONFIG_HFSPLUS_FS=y
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
-
-#
-# Network File Systems
-#
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
 CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
+CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
 CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-CONFIG_NCPFS_NFS_NS=y
-CONFIG_NCPFS_OS2_NS=y
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
 # CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
@@ -808,27 +924,9 @@ CONFIG_CODA_FS=m
 #
 # Partition Types
 #
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-CONFIG_AMIGA_PARTITION=y
-CONFIG_ATARI_PARTITION=y
+# CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MAC_PARTITION=y
 CONFIG_MSDOS_PARTITION=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_MINIX_SUBPARTITION=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-CONFIG_LDM_PARTITION=y
-CONFIG_LDM_DEBUG=y
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-CONFIG_SUN_PARTITION=y
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -869,46 +967,65 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=y
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MD5=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
@@ -917,20 +1034,35 @@ CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig
index f0d5534..f40b172 100644
--- a/arch/m68k/configs/mvme147_defconfig
+++ b/arch/m68k/configs/mvme147_defconfig
@@ -1,63 +1,111 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun  7 20:34:50 2005
+# Linux kernel version: 2.6.25-rc8
+# Wed Apr  2 20:46:17 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
-CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_NO_IOPORT=y
+# CONFIG_NO_DMA is not set
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION="-mvme147"
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform dependent setup
@@ -85,6 +133,22 @@ CONFIG_M68030=y
 CONFIG_MMU_MOTOROLA=y
 # CONFIG_M68KFPU_EMU is not set
 # CONFIG_ADVANCED is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=3
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
 
 #
 # General setup
@@ -93,135 +157,11 @@ CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
 CONFIG_PROC_HARDWARE=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-CONFIG_MVME147_SCSI=y
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
+# Networking
 #
 CONFIG_NET=y
 
@@ -231,10 +171,17 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
@@ -246,145 +193,199 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IP_VS is not set
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
 CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
 # IP: Netfilter Configuration
 #
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
 CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
 #
+CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_FRAG=m
 CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
 
 #
-# SCTP Configuration (EXPERIMENTAL)
+# DCCP CCIDs Configuration (EXPERIMENTAL)
 #
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
 # CONFIG_SCTP_HMAC_NONE is not set
 # CONFIG_SCTP_HMAC_SHA1 is not set
 CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
 # CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
+# CONFIG_IPX is not set
 CONFIG_ATALK=m
 # CONFIG_DEV_APPLETALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
 
@@ -392,46 +393,155 @@ CONFIG_NET_CLS_ROUTE=y
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-CONFIG_EQUALIZER=m
-# CONFIG_TUN is not set
+# CONFIG_AF_RXRPC is not set
 
 #
-# Ethernet (10 or 100Mbit)
+# Wireless
 #
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-CONFIG_MVME147_NET=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
-# Ethernet (1000 Mbit)
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
 #
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
 
 #
-# Ethernet (10000 Mbit)
+# SCSI support type (disk, tape, CD-ROM)
 #
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
 
 #
-# Token Ring devices
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
 #
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
-# Wireless LAN (non-hamradio)
+# SCSI Transports
 #
-# CONFIG_NET_RADIO is not set
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_MVME147_SCSI=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
+CONFIG_EQUALIZER=m
+# CONFIG_TUN is not set
+CONFIG_VETH=m
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_MVME147_NET=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
-# Wan interfaces
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -440,28 +550,28 @@ CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
 CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -471,7 +581,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -484,11 +593,19 @@ CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=m
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -496,7 +613,7 @@ CONFIG_MOUSE_SERIAL=m
 # Hardware I/O ports
 #
 CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
+# CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_LIBPS2=m
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
@@ -507,6 +624,7 @@ CONFIG_SERIO_LIBPS2=m
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -520,112 +638,80 @@ CONFIG_HW_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 CONFIG_GEN_RTC=m
 CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
 
 #
-# TPM devices
-#
-
-#
-# I2C support
+# SPI support
 #
-# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Dallas's 1-wire bus
+# Sonics Silicon Backplane
 #
-# CONFIG_W1 is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# Misc devices
+# Multifunction device drivers
 #
+# CONFIG_MFD_SM501 is not set
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
-# Digital Video Broadcasting Devices
+# Graphics support
 #
-# CONFIG_DVB is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Graphics support
+# Display device support
 #
-CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
-# CONFIG_FB_MACMODES is not set
-CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
 
 #
-# InfiniBand support
+# Userspace I/O
 #
-# CONFIG_INFINIBAND is not set
+# CONFIG_UIO is not set
 
 #
 # Character devices
@@ -638,10 +724,11 @@ CONFIG_SERIAL_CONSOLE=y
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
@@ -652,25 +739,29 @@ CONFIG_JFS_FS=m
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+# CONFIG_XFS_RT is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_NOLOCK=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -678,7 +769,6 @@ CONFIG_AUTOFS4_FS=m
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
 CONFIG_UDF_FS=m
 CONFIG_UDF_NLS=y
 
@@ -697,15 +787,12 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-# CONFIG_DEVFS_MOUNT is not set
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -719,44 +806,40 @@ CONFIG_HFSPLUS_FS=m
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
-
-#
-# Network File Systems
-#
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
 CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
 CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-# CONFIG_NCPFS_NFS_NS is not set
-# CONFIG_NCPFS_OS2_NS is not set
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
 # CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
@@ -766,10 +849,7 @@ CONFIG_CODA_FS=m
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
+CONFIG_SYSV68_PARTITION=y
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -810,35 +890,42 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
@@ -847,9 +934,21 @@ CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
@@ -858,20 +957,35 @@ CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig
index 1d5c46f..e9ccc77 100644
--- a/arch/m68k/configs/mvme16x_defconfig
+++ b/arch/m68k/configs/mvme16x_defconfig
@@ -1,63 +1,111 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun  7 20:34:53 2005
+# Linux kernel version: 2.6.25-rc8
+# Wed Apr  2 20:46:19 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
-CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_NO_IOPORT=y
+# CONFIG_NO_DMA is not set
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION="-mvme16x"
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform dependent setup
@@ -85,6 +133,22 @@ CONFIG_M68060=y
 CONFIG_MMU_MOTOROLA=y
 # CONFIG_M68KFPU_EMU is not set
 # CONFIG_ADVANCED is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=3
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
 
 #
 # General setup
@@ -93,134 +157,11 @@ CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
 CONFIG_PROC_HARDWARE=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
+# Networking
 #
 CONFIG_NET=y
 
@@ -230,10 +171,17 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
@@ -245,145 +193,199 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IP_VS is not set
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
 CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
 # IP: Netfilter Configuration
 #
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
 CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
 #
+CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_FRAG=m
 CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
 
 #
-# SCTP Configuration (EXPERIMENTAL)
+# DCCP CCIDs Configuration (EXPERIMENTAL)
 #
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
 # CONFIG_SCTP_HMAC_NONE is not set
 # CONFIG_SCTP_HMAC_SHA1 is not set
 CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
 # CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
+# CONFIG_IPX is not set
 CONFIG_ATALK=m
 # CONFIG_DEV_APPLETALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
 
@@ -391,46 +393,156 @@ CONFIG_NET_CLS_ROUTE=y
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-CONFIG_EQUALIZER=m
-# CONFIG_TUN is not set
+# CONFIG_AF_RXRPC is not set
 
 #
-# Ethernet (10 or 100Mbit)
+# Wireless
 #
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-CONFIG_MVME16x_NET=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
-# Ethernet (1000 Mbit)
+# Device Drivers
 #
 
 #
-# Ethernet (10000 Mbit)
+# Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
 
 #
-# Token Ring devices
+# SCSI support type (disk, tape, CD-ROM)
 #
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
 
 #
-# Wireless LAN (non-hamradio)
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
 #
-# CONFIG_NET_RADIO is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
-# Wan interfaces
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+CONFIG_53C700_BE_BUS=y
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_MVME16x_SCSI=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
+CONFIG_EQUALIZER=m
+# CONFIG_TUN is not set
+CONFIG_VETH=m
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_MVME16x_NET=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
 #
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -439,28 +551,28 @@ CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
 CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -470,7 +582,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -483,11 +594,19 @@ CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=m
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -495,7 +614,7 @@ CONFIG_MOUSE_SERIAL=m
 # Hardware I/O ports
 #
 CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
+# CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_LIBPS2=m
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
@@ -506,6 +625,7 @@ CONFIG_SERIO_LIBPS2=m
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -519,116 +639,85 @@ CONFIG_HW_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 CONFIG_GEN_RTC=m
 CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
 
 #
-# TPM devices
+# SPI support
 #
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# I2C support
+# Sonics Silicon Backplane
 #
-# CONFIG_I2C is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
+# Multifunction device drivers
 #
+# CONFIG_MFD_SM501 is not set
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
-# Digital Video Broadcasting Devices
+# Graphics support
 #
-# CONFIG_DVB is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Graphics support
+# Display device support
 #
-CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
-# CONFIG_FB_MACMODES is not set
-CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
 
 #
-# InfiniBand support
+# Userspace I/O
 #
-# CONFIG_INFINIBAND is not set
+# CONFIG_UIO is not set
 
 #
 # Character devices
 #
+CONFIG_SERIAL167=y
 CONFIG_MVME162_SCC=y
 CONFIG_SERIAL_CONSOLE=y
 
@@ -637,10 +726,11 @@ CONFIG_SERIAL_CONSOLE=y
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
@@ -651,25 +741,29 @@ CONFIG_JFS_FS=m
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+# CONFIG_XFS_RT is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_NOLOCK=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -677,7 +771,6 @@ CONFIG_AUTOFS4_FS=m
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
 CONFIG_UDF_FS=m
 CONFIG_UDF_NLS=y
 
@@ -696,15 +789,12 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-# CONFIG_DEVFS_MOUNT is not set
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -718,44 +808,40 @@ CONFIG_HFSPLUS_FS=m
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
-
-#
-# Network File Systems
-#
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
 CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
 CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-# CONFIG_NCPFS_NFS_NS is not set
-# CONFIG_NCPFS_OS2_NS is not set
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
 # CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
@@ -765,10 +851,7 @@ CONFIG_CODA_FS=m
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
+CONFIG_SYSV68_PARTITION=y
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -809,35 +892,42 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
@@ -846,9 +936,21 @@ CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
@@ -857,20 +959,35 @@ CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig
index 8562386..165658f 100644
--- a/arch/m68k/configs/q40_defconfig
+++ b/arch/m68k/configs/q40_defconfig
@@ -1,63 +1,112 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun  7 20:34:58 2005
+# Linux kernel version: 2.6.25-rc8
+# Wed Apr  2 20:46:20 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
-CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_NO_IOPORT=y
+# CONFIG_NO_DMA is not set
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION="-q40"
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform dependent setup
@@ -80,10 +129,24 @@ CONFIG_Q40=y
 CONFIG_M68040=y
 CONFIG_M68060=y
 CONFIG_MMU_MOTOROLA=y
-CONFIG_M68KFPU_EMU=y
-CONFIG_M68KFPU_EMU_EXTRAPREC=y
-# CONFIG_M68KFPU_EMU_ONLY is not set
+# CONFIG_M68KFPU_EMU is not set
 # CONFIG_ADVANCED is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=3
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
 
 #
 # General setup
@@ -91,41 +154,282 @@ CONFIG_M68KFPU_EMU_EXTRAPREC=y
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
-# CONFIG_HEARTBEAT is not set
+CONFIG_HEARTBEAT=y
 CONFIG_PROC_HARDWARE=y
 CONFIG_ISA=y
 CONFIG_GENERIC_ISA_DMA=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
-# Device Drivers
+# Networking
 #
+CONFIG_NET=y
 
 #
-# Generic Driver Options
+# Networking options
 #
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
-# Memory Technology Devices (MTD)
+# IP: Netfilter Configuration
 #
-# CONFIG_MTD is not set
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# Parallel port support
+# IPv6: Netfilter Configuration
 #
-# CONFIG_PARPORT is not set
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
 
 #
-# Plug and Play support
+# DCCP CCIDs Configuration (EXPERIMENTAL)
 #
-# CONFIG_PNP is not set
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+CONFIG_ATALK=m
+# CONFIG_DEV_APPLETALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
 
 #
-# Block devices
+# Network testing
 #
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+# CONFIG_PNP is not set
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
@@ -134,54 +438,64 @@ CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_BLK_DEV_XIP is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
 CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDETAPE=m
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
+# CONFIG_BLK_DEV_IDETAPE is not set
 CONFIG_BLK_DEV_IDEFLOPPY=m
 # CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
 
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_Q40IDE=y
-# CONFIG_IDE_CHIPSETS is not set
+
+#
+# Other IDE chipsets support
+#
+
+#
+# Note: most of these also require special kernel boot parameters
+#
+# CONFIG_BLK_DEV_4DRIVES is not set
+# CONFIG_BLK_DEV_ALI14XX is not set
+# CONFIG_BLK_DEV_DTC2278 is not set
+# CONFIG_BLK_DEV_HT6560B is not set
+# CONFIG_BLK_DEV_QD65XX is not set
+# CONFIG_BLK_DEV_UMC8672 is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_IDE_ARCH_OBSOLETE_INIT is not set
 # CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=m
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
 
 #
@@ -189,10 +503,11 @@ CONFIG_SCSI_PROC_FS=y
 #
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
+CONFIG_CHR_DEV_OSST=m
 CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
 
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -200,266 +515,71 @@ CONFIG_CHR_DEV_SG=m
 # CONFIG_SCSI_MULTI_LUN is not set
 CONFIG_SCSI_CONSTANTS=y
 # CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
-# SCSI Transport Attributes
+# SCSI Transports
 #
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_AHA152X is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_DTC3280 is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_GENERIC_NCR5380 is not set
 # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
 # CONFIG_SCSI_NCR53C406A is not set
 # CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
 # CONFIG_SCSI_QLOGIC_FAS is not set
 # CONFIG_SCSI_SYM53C416 is not set
 # CONFIG_SCSI_T128 is not set
 # CONFIG_SCSI_DEBUG is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
 CONFIG_MD_RAID0=m
 CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
 CONFIG_MD_MULTIPATH=m
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
 CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
 CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
-CONFIG_ATALK=m
-# CONFIG_DEV_APPLETALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
 CONFIG_EQUALIZER=m
 # CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+CONFIG_VETH=m
 # CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
+# CONFIG_MII is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_NET_VENDOR_SMC is not set
 # CONFIG_NET_VENDOR_RACAL is not set
@@ -468,30 +588,21 @@ CONFIG_MII=m
 # CONFIG_HP100 is not set
 # CONFIG_NET_ISA is not set
 CONFIG_NE2000=m
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
 #
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -500,28 +611,28 @@ CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
 CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -531,7 +642,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -544,22 +654,32 @@ CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=m
 # CONFIG_MOUSE_INPORT is not set
 # CONFIG_MOUSE_LOGIBM is not set
 # CONFIG_MOUSE_PC110PAD is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_M68K_BEEP=m
+# CONFIG_INPUT_UINPUT is not set
 
 #
 # Hardware I/O ports
 #
 CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
+# CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_Q40KBD=m
 CONFIG_SERIO_LIBPS2=m
 # CONFIG_SERIO_RAW is not set
@@ -571,6 +691,7 @@ CONFIG_SERIO_LIBPS2=m
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -584,115 +705,117 @@ CONFIG_HW_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 CONFIG_GEN_RTC=m
 CONFIG_GEN_RTC_X=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
+# CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 
 #
-# Dallas's 1-wire bus
+# SPI support
 #
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Misc devices
+# Sonics Silicon Backplane
 #
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# Multimedia devices
+# Multifunction device drivers
 #
-# CONFIG_VIDEO_DEV is not set
+# CONFIG_MFD_SM501 is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia devices
 #
-# CONFIG_DVB is not set
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
-CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
 CONFIG_FB_Q40=y
+# CONFIG_FB_UVESA is not set
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 # CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
 #
-CONFIG_SOUND=y
-CONFIG_DMASOUND_Q40=y
-CONFIG_DMASOUND=y
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_SOUND=m
+CONFIG_DMASOUND_Q40=m
+CONFIG_DMASOUND=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
 
 #
-# InfiniBand support
+# Userspace I/O
 #
-# CONFIG_INFINIBAND is not set
+# CONFIG_UIO is not set
 
 #
 # Character devices
@@ -703,10 +826,11 @@ CONFIG_DMASOUND=y
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
@@ -717,25 +841,29 @@ CONFIG_JFS_FS=m
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+# CONFIG_XFS_RT is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_NOLOCK=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -743,7 +871,6 @@ CONFIG_AUTOFS4_FS=m
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
 CONFIG_UDF_FS=m
 CONFIG_UDF_NLS=y
 
@@ -762,13 +889,12 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -782,44 +908,39 @@ CONFIG_HFSPLUS_FS=m
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
-CONFIG_UFS_FS_WRITE=y
-
-#
-# Network File Systems
-#
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
 CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
 CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-# CONFIG_NCPFS_NFS_NS is not set
-# CONFIG_NCPFS_OS2_NS is not set
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
 # CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
@@ -829,10 +950,6 @@ CONFIG_CODA_FS=m
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -873,35 +990,42 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
@@ -910,9 +1034,21 @@ CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
@@ -921,20 +1057,35 @@ CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig
index af903b5..bd2b9c4 100644
--- a/arch/m68k/configs/sun3_defconfig
+++ b/arch/m68k/configs/sun3_defconfig
@@ -1,63 +1,111 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun  7 20:35:02 2005
+# Linux kernel version: 2.6.25-rc8
+# Wed Apr  2 20:46:22 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
-CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_NO_IOPORT=y
+CONFIG_NO_DMA=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION="-sun3"
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform dependent setup
@@ -69,10 +117,24 @@ CONFIG_SUN3=y
 #
 CONFIG_M68020=y
 CONFIG_MMU_SUN3=y
-CONFIG_M68KFPU_EMU=y
-CONFIG_M68KFPU_EMU_EXTRAPREC=y
-# CONFIG_M68KFPU_EMU_ONLY is not set
+# CONFIG_M68KFPU_EMU is not set
 # CONFIG_ADVANCED is not set
+CONFIG_SINGLE_MEMORY_CHUNK=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
 
 #
 # General setup
@@ -81,134 +143,11 @@ CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
 CONFIG_PROC_HARDWARE=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
+# Networking
 #
 CONFIG_NET=y
 
@@ -218,10 +157,17 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
@@ -233,145 +179,199 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IP_VS is not set
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
 CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
 # IP: Netfilter Configuration
 #
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
 CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
 #
+CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_FRAG=m
 CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
 
 #
-# SCTP Configuration (EXPERIMENTAL)
+# DCCP CCIDs Configuration (EXPERIMENTAL)
 #
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
 # CONFIG_SCTP_HMAC_NONE is not set
 # CONFIG_SCTP_HMAC_SHA1 is not set
 CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
 # CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
+# CONFIG_IPX is not set
 CONFIG_ATALK=m
 # CONFIG_DEV_APPLETALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
 
@@ -379,47 +379,156 @@ CONFIG_NET_CLS_ROUTE=y
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-CONFIG_EQUALIZER=m
-# CONFIG_TUN is not set
+# CONFIG_AF_RXRPC is not set
 
 #
-# Ethernet (10 or 100Mbit)
+# Wireless
 #
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-CONFIG_SUN3LANCE=y
-CONFIG_SUN3_82586=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
-# Ethernet (1000 Mbit)
+# Device Drivers
 #
 
 #
-# Ethernet (10000 Mbit)
+# Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
 
 #
-# Token Ring devices
+# SCSI device support
 #
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+# CONFIG_SCSI_DMA is not set
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
 
 #
-# Wireless LAN (non-hamradio)
+# SCSI support type (disk, tape, CD-ROM)
 #
-# CONFIG_NET_RADIO is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
 
 #
-# Wan interfaces
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
 #
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_SUN3_SCSI=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
+CONFIG_EQUALIZER=m
+# CONFIG_TUN is not set
+CONFIG_VETH=m
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_SUN3LANCE=y
+CONFIG_SUN3_82586=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -428,28 +537,28 @@ CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
 CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -459,7 +568,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -472,11 +580,19 @@ CONFIG_KEYBOARD_SUNKBD=y
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=m
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -484,7 +600,7 @@ CONFIG_MOUSE_SERIAL=m
 # Hardware I/O ports
 #
 CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=m
+# CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_LIBPS2=m
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
@@ -495,6 +611,7 @@ CONFIG_SERIO_LIBPS2=m
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -508,112 +625,113 @@ CONFIG_HW_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_GEN_RTC=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_GEN_RTC=m
 CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
+# CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 
 #
-# Dallas's 1-wire bus
+# SPI support
 #
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Misc devices
+# Sonics Silicon Backplane
 #
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# Multimedia devices
+# Multifunction device drivers
 #
-# CONFIG_VIDEO_DEV is not set
+# CONFIG_MFD_SM501 is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia devices
 #
-# CONFIG_DVB is not set
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
 # CONFIG_FB_CFB_FILLRECT is not set
 # CONFIG_FB_CFB_COPYAREA is not set
 # CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
-CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_UVESA is not set
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 # CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
 
 #
-# InfiniBand support
+# Userspace I/O
 #
-# CONFIG_INFINIBAND is not set
+# CONFIG_UIO is not set
 
 #
 # Character devices
@@ -624,10 +742,11 @@ CONFIG_LOGO_LINUX_CLUT224=y
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
@@ -638,25 +757,29 @@ CONFIG_JFS_FS=m
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+# CONFIG_XFS_RT is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_NOLOCK=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -664,7 +787,6 @@ CONFIG_AUTOFS4_FS=m
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
 CONFIG_UDF_FS=m
 CONFIG_UDF_NLS=y
 
@@ -683,15 +805,12 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -705,44 +824,40 @@ CONFIG_HFSPLUS_FS=m
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
-CONFIG_UFS_FS_WRITE=y
-
-#
-# Network File Systems
-#
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
 CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
 CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-# CONFIG_NCPFS_NFS_NS is not set
-# CONFIG_NCPFS_OS2_NS is not set
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
 # CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
@@ -753,10 +868,6 @@ CONFIG_CODA_FS=m
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
 CONFIG_SUN_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -797,35 +908,42 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
@@ -834,9 +952,21 @@ CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
@@ -845,20 +975,34 @@ CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig
index 997143b..f18154f 100644
--- a/arch/m68k/configs/sun3x_defconfig
+++ b/arch/m68k/configs/sun3x_defconfig
@@ -1,63 +1,111 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun  7 20:35:06 2005
+# Linux kernel version: 2.6.25-rc8
+# Wed Apr  2 20:46:23 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
-CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_NO_IOPORT=y
+# CONFIG_NO_DMA is not set
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION="-sun3x"
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform dependent setup
@@ -80,10 +128,24 @@ CONFIG_M68030=y
 # CONFIG_M68040 is not set
 # CONFIG_M68060 is not set
 CONFIG_MMU_MOTOROLA=y
-CONFIG_M68KFPU_EMU=y
-CONFIG_M68KFPU_EMU_EXTRAPREC=y
-# CONFIG_M68KFPU_EMU_ONLY is not set
+# CONFIG_M68KFPU_EMU is not set
 # CONFIG_ADVANCED is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=3
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
 
 #
 # General setup
@@ -92,135 +154,11 @@ CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
 CONFIG_PROC_HARDWARE=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-CONFIG_SUN3X_ESP=y
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
+# Networking
 #
 CONFIG_NET=y
 
@@ -230,10 +168,17 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
@@ -245,145 +190,199 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IP_VS is not set
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
 CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
 # IP: Netfilter Configuration
 #
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
 CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
 #
+CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_FRAG=m
 CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
 
 #
-# SCTP Configuration (EXPERIMENTAL)
+# DCCP CCIDs Configuration (EXPERIMENTAL)
 #
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
 # CONFIG_SCTP_HMAC_NONE is not set
 # CONFIG_SCTP_HMAC_SHA1 is not set
 CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
 # CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
+# CONFIG_IPX is not set
 CONFIG_ATALK=m
 # CONFIG_DEV_APPLETALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
 
@@ -391,46 +390,155 @@ CONFIG_NET_CLS_ROUTE=y
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-CONFIG_EQUALIZER=m
-# CONFIG_TUN is not set
+# CONFIG_AF_RXRPC is not set
 
 #
-# Ethernet (10 or 100Mbit)
+# Wireless
 #
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-CONFIG_SUN3LANCE=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
-# Ethernet (1000 Mbit)
+# Device Drivers
 #
 
 #
-# Ethernet (10000 Mbit)
+# Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
 
 #
-# Token Ring devices
+# SCSI device support
 #
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
 
 #
-# Wireless LAN (non-hamradio)
+# SCSI support type (disk, tape, CD-ROM)
 #
-# CONFIG_NET_RADIO is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
 
 #
-# Wan interfaces
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
 #
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_SUN3X_ESP=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
+CONFIG_EQUALIZER=m
+# CONFIG_TUN is not set
+CONFIG_VETH=m
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_SUN3LANCE=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -439,28 +547,28 @@ CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
 CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -470,7 +578,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -483,11 +590,19 @@ CONFIG_KEYBOARD_SUNKBD=y
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=m
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -495,7 +610,7 @@ CONFIG_MOUSE_SERIAL=m
 # Hardware I/O ports
 #
 CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=m
+# CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_LIBPS2=m
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
@@ -506,6 +621,7 @@ CONFIG_SERIO_LIBPS2=m
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -519,112 +635,113 @@ CONFIG_HW_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_GEN_RTC=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_GEN_RTC=m
 CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
+# CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 
 #
-# Dallas's 1-wire bus
+# SPI support
 #
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Misc devices
+# Sonics Silicon Backplane
 #
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# Multimedia devices
+# Multifunction device drivers
 #
-# CONFIG_VIDEO_DEV is not set
+# CONFIG_MFD_SM501 is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia devices
 #
-# CONFIG_DVB is not set
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
 # CONFIG_FB_CFB_FILLRECT is not set
 # CONFIG_FB_CFB_COPYAREA is not set
 # CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
-CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_UVESA is not set
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 # CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
 
 #
-# InfiniBand support
+# Userspace I/O
 #
-# CONFIG_INFINIBAND is not set
+# CONFIG_UIO is not set
 
 #
 # Character devices
@@ -635,10 +752,11 @@ CONFIG_LOGO_LINUX_CLUT224=y
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
@@ -649,25 +767,29 @@ CONFIG_JFS_FS=m
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+# CONFIG_XFS_RT is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_NOLOCK=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -675,7 +797,6 @@ CONFIG_AUTOFS4_FS=m
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
 CONFIG_UDF_FS=m
 CONFIG_UDF_NLS=y
 
@@ -694,15 +815,12 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -716,44 +834,40 @@ CONFIG_HFSPLUS_FS=m
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
-CONFIG_UFS_FS_WRITE=y
-
-#
-# Network File Systems
-#
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
 CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
 CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-# CONFIG_NCPFS_NFS_NS is not set
-# CONFIG_NCPFS_OS2_NS is not set
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
 # CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
@@ -764,10 +878,6 @@ CONFIG_CODA_FS=m
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
 CONFIG_SUN_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -808,35 +918,42 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
@@ -845,9 +962,21 @@ CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
@@ -856,20 +985,35 @@ CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68k/defconfig b/arch/m68k/defconfig
deleted file mode 100644
index 7d935e4..0000000
--- a/arch/m68k/defconfig
+++ /dev/null
@@ -1,657 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun  7 20:34:17 2005
-#
-CONFIG_M68K=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Platform dependent setup
-#
-# CONFIG_SUN3 is not set
-CONFIG_AMIGA=y
-# CONFIG_ATARI is not set
-# CONFIG_MAC is not set
-# CONFIG_APOLLO is not set
-# CONFIG_VME is not set
-# CONFIG_HP300 is not set
-# CONFIG_SUN3X is not set
-# CONFIG_Q40 is not set
-
-#
-# Processor type
-#
-CONFIG_M68020=y
-CONFIG_M68030=y
-CONFIG_M68040=y
-# CONFIG_M68060 is not set
-CONFIG_MMU_MOTOROLA=y
-# CONFIG_M68KFPU_EMU is not set
-# CONFIG_ADVANCED is not set
-
-#
-# General setup
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_ZORRO=y
-# CONFIG_AMIGA_PCMCIA is not set
-# CONFIG_HEARTBEAT is not set
-CONFIG_PROC_HARDWARE=y
-# CONFIG_ZORRO_NAMES is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-CONFIG_AMIGA_FLOPPY=y
-# CONFIG_AMIGA_Z2RAM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=y
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-# CONFIG_CHR_DEV_SG is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-CONFIG_A3000_SCSI=y
-CONFIG_A2091_SCSI=y
-CONFIG_GVP11_SCSI=y
-# CONFIG_CYBERSTORM_SCSI is not set
-# CONFIG_CYBERSTORMII_SCSI is not set
-# CONFIG_BLZ2060_SCSI is not set
-# CONFIG_BLZ1230_SCSI is not set
-# CONFIG_FASTLANE_SCSI is not set
-# CONFIG_OKTAGON_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_AMIGA is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_AMIGA is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_A2232 is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-CONFIG_FB_SOFT_CURSOR=y
-# CONFIG_FB_MACMODES is not set
-CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_CIRRUS is not set
-CONFIG_FB_AMIGA=y
-CONFIG_FB_AMIGA_OCS=y
-CONFIG_FB_AMIGA_ECS=y
-CONFIG_FB_AMIGA_AGA=y
-# CONFIG_FB_FM2 is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# Character devices
-#
-CONFIG_AMIGA_BUILTIN_SERIAL=y
-# CONFIG_MULTIFACE_III_TTY is not set
-# CONFIG_GVPIOEXT is not set
-# CONFIG_SERIAL_CONSOLE is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-# CONFIG_VFAT_FS is not set
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_AMIGA_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DEBUG_BUGVERBOSE=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 72097da..1c62381f 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -482,10 +482,13 @@ endif
 # be 16kb aligned or the handling of the current variable will break.
 # Simplified: what IP22 does at 128MB+ in ksegN, IP28 does at 512MB+ in xkphys
 #
-#core-$(CONFIG_SGI_IP28)		+= arch/mips/sgi-ip22/ arch/mips/arc/arc_con.o
+ifdef CONFIG_SGI_IP28
+  ifeq ($(call cc-option-yn,-mr10k-cache-barrier=1), n)
+      $(error gcc doesn't support needed option -mr10k-cache-barrier=1)
+  endif
+endif
 core-$(CONFIG_SGI_IP28)		+= arch/mips/sgi-ip22/
 cflags-$(CONFIG_SGI_IP28)	+= -mr10k-cache-barrier=1 -Iinclude/asm-mips/mach-ip28
-#cflags-$(CONFIG_SGI_IP28)	+= -Iinclude/asm-mips/mach-ip28
 load-$(CONFIG_SGI_IP28)		+= 0xa800000020004000
 
 #
diff --git a/arch/mips/au1000/common/cputable.c b/arch/mips/au1000/common/cputable.c
index d8df5fd..5c0d35d 100644
--- a/arch/mips/au1000/common/cputable.c
+++ b/arch/mips/au1000/common/cputable.c
@@ -22,24 +22,24 @@ struct cpu_spec* cur_cpu_spec[NR_CPUS];
 /* With some thought, we can probably use the mask to reduce the
  * size of the table.
  */
-struct cpu_spec	cpu_specs[] = {
-    { 0xffffffff, 0x00030100, "Au1000 DA", 1, 0 },
-    { 0xffffffff, 0x00030201, "Au1000 HA", 1, 0 },
-    { 0xffffffff, 0x00030202, "Au1000 HB", 1, 0 },
-    { 0xffffffff, 0x00030203, "Au1000 HC", 1, 1 },
-    { 0xffffffff, 0x00030204, "Au1000 HD", 1, 1 },
-    { 0xffffffff, 0x01030200, "Au1500 AB", 1, 1 },
-    { 0xffffffff, 0x01030201, "Au1500 AC", 0, 1 },
-    { 0xffffffff, 0x01030202, "Au1500 AD", 0, 1 },
-    { 0xffffffff, 0x02030200, "Au1100 AB", 1, 1 },
-    { 0xffffffff, 0x02030201, "Au1100 BA", 1, 1 },
-    { 0xffffffff, 0x02030202, "Au1100 BC", 1, 1 },
-    { 0xffffffff, 0x02030203, "Au1100 BD", 0, 1 },
-    { 0xffffffff, 0x02030204, "Au1100 BE", 0, 1 },
-    { 0xffffffff, 0x03030200, "Au1550 AA", 0, 1 },
-    { 0xffffffff, 0x04030200, "Au1200 AB", 0, 0 },
-    { 0xffffffff, 0x04030201, "Au1200 AC", 1, 0 },
-    { 0x00000000, 0x00000000, "Unknown Au1xxx", 1, 0 },
+struct cpu_spec cpu_specs[] = {
+	{ 0xffffffff, 0x00030100, "Au1000 DA", 1, 0, 1 },
+	{ 0xffffffff, 0x00030201, "Au1000 HA", 1, 0, 1 },
+	{ 0xffffffff, 0x00030202, "Au1000 HB", 1, 0, 1 },
+	{ 0xffffffff, 0x00030203, "Au1000 HC", 1, 1, 0 },
+	{ 0xffffffff, 0x00030204, "Au1000 HD", 1, 1, 0 },
+	{ 0xffffffff, 0x01030200, "Au1500 AB", 1, 1, 0 },
+	{ 0xffffffff, 0x01030201, "Au1500 AC", 0, 1, 0 },
+	{ 0xffffffff, 0x01030202, "Au1500 AD", 0, 1, 0 },
+	{ 0xffffffff, 0x02030200, "Au1100 AB", 1, 1, 0 },
+	{ 0xffffffff, 0x02030201, "Au1100 BA", 1, 1, 0 },
+	{ 0xffffffff, 0x02030202, "Au1100 BC", 1, 1, 0 },
+	{ 0xffffffff, 0x02030203, "Au1100 BD", 0, 1, 0 },
+	{ 0xffffffff, 0x02030204, "Au1100 BE", 0, 1, 0 },
+	{ 0xffffffff, 0x03030200, "Au1550 AA", 0, 1, 0 },
+	{ 0xffffffff, 0x04030200, "Au1200 AB", 0, 0, 0 },
+	{ 0xffffffff, 0x04030201, "Au1200 AC", 1, 0, 0 },
+	{ 0x00000000, 0x00000000, "Unknown Au1xxx", 1, 0, 0 }
 };
 
 void
diff --git a/arch/mips/au1000/common/setup.c b/arch/mips/au1000/common/setup.c
index d885e38..9e4ab80 100644
--- a/arch/mips/au1000/common/setup.c
+++ b/arch/mips/au1000/common/setup.c
@@ -57,7 +57,7 @@ void __init plat_mem_setup(void)
 {
 	struct	cpu_spec *sp;
 	char *argptr;
-	unsigned long prid, cpupll, bclk = 1;
+	unsigned long prid, cpufreq, bclk = 1;
 
 	set_cpuspec();
 	sp = cur_cpu_spec[0];
@@ -65,8 +65,15 @@ void __init plat_mem_setup(void)
 	board_setup();  /* board specific setup */
 
 	prid = read_c0_prid();
-	cpupll = (au_readl(0xB1900060) & 0x3F) * 12;
-	printk("(PRId %08lx) @ %ldMHZ\n", prid, cpupll);
+	if (sp->cpu_pll_wo)
+#ifdef CONFIG_SOC_AU1000_FREQUENCY
+		cpufreq = CONFIG_SOC_AU1000_FREQUENCY / 1000000;
+#else
+		cpufreq = 396;
+#endif
+	else
+		cpufreq = (au_readl(SYS_CPUPLL) & 0x3F) * 12;
+	printk(KERN_INFO "(PRID %08lx) @ %ld MHz\n", prid, cpufreq);
 
 	bclk = sp->cpu_bclk;
 	if (bclk)
diff --git a/arch/mips/au1000/common/time.c b/arch/mips/au1000/common/time.c
index f113b51..e122bbc 100644
--- a/arch/mips/au1000/common/time.c
+++ b/arch/mips/au1000/common/time.c
@@ -209,18 +209,22 @@ unsigned long cal_r4koff(void)
 		while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S);
 		au_writel(0, SYS_TOYWRITE);
 		while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S);
+	} else
+		no_au1xxx_32khz = 1;
 
-		cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) *
-			AU1000_SRC_CLK;
-	}
-	else {
-		/* The 32KHz oscillator isn't running, so assume there
-		 * isn't one and grab the processor speed from the PLL.
-		 * NOTE: some old silicon doesn't allow reading the PLL.
-		 */
+	/*
+	 * On early Au1000, sys_cpupll was write-only. Since these
+	 * silicon versions of Au1000 are not sold by AMD, we don't bend
+	 * over backwards trying to determine the frequency.
+	 */
+	if (cur_cpu_spec[0]->cpu_pll_wo)
+#ifdef CONFIG_SOC_AU1000_FREQUENCY
+		cpu_speed = CONFIG_SOC_AU1000_FREQUENCY;
+#else
+		cpu_speed = 396000000;
+#endif
+	else
 		cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) * AU1000_SRC_CLK;
-		no_au1xxx_32khz = 1;
-	}
 	mips_hpt_frequency = cpu_speed;
 	// Equation: Baudrate = CPU / (SD * 2 * CLKDIV * 16)
 	set_au1x00_uart_baud_base(cpu_speed / (2 * ((int)(au_readl(SYS_POWERCTRL)&0x03) + 2) * 16));
diff --git a/arch/mips/au1000/xxs1500/board_setup.c b/arch/mips/au1000/xxs1500/board_setup.c
index a9237f4..b2e413e 100644
--- a/arch/mips/au1000/xxs1500/board_setup.c
+++ b/arch/mips/au1000/xxs1500/board_setup.c
@@ -33,11 +33,10 @@
 #include <asm/cpu.h>
 #include <asm/bootinfo.h>
 #include <asm/irq.h>
-#include <asm/keyboard.h>
 #include <asm/mipsregs.h>
 #include <asm/reboot.h>
 #include <asm/pgtable.h>
-#include <asm/au1000.h>
+#include <asm/mach-au1x00/au1000.h>
 
 void board_reset(void)
 {
diff --git a/arch/mips/au1000/xxs1500/irqmap.c b/arch/mips/au1000/xxs1500/irqmap.c
index 38934929..a343da1 100644
--- a/arch/mips/au1000/xxs1500/irqmap.c
+++ b/arch/mips/au1000/xxs1500/irqmap.c
@@ -45,7 +45,7 @@
 #include <asm/io.h>
 #include <asm/mipsregs.h>
 #include <asm/system.h>
-#include <asm/au1000.h>
+#include <asm/mach-au1x00/au1000.h>
 
 struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
 	{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig
index abf70d7..3b42cea 100644
--- a/arch/mips/configs/bigsur_defconfig
+++ b/arch/mips/configs/bigsur_defconfig
@@ -1,58 +1,48 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:22 2007
+# Linux kernel version: 2.6.25-rc7
+# Mon Mar 31 08:11:19 2008
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MACH_ALCHEMY is not set
 # CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_LEMOTE_FULONG is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
-# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
 # CONFIG_SGI_IP32 is not set
-CONFIG_SIBYTE_BIGSUR=y
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
 # CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+CONFIG_SIBYTE_BIGSUR=y
 # CONFIG_SNI_RM is not set
 # CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_WR_PPMC is not set
 CONFIG_SIBYTE_BCM1x80=y
 CONFIG_SIBYTE_SB1xxx_SOC=y
 # CONFIG_CPU_SB1_PASS_1 is not set
@@ -68,9 +58,11 @@ CONFIG_SIBYTE_CFE=y
 # CONFIG_SIBYTE_CFE_CONSOLE is not set
 # CONFIG_SIBYTE_BUS_WATCHER is not set
 # CONFIG_SIBYTE_TBPROF is not set
+CONFIG_SIBYTE_HAS_ZBUS_PROFILING=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
@@ -81,11 +73,17 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 # CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
 CONFIG_CEVT_BCM1480=y
 CONFIG_CSRC_BCM1480=y
+CONFIG_CFE=y
 CONFIG_DMA_COHERENT=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_NO_IOPORT is not set
 CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
 CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
 CONFIG_SWAP_IO_SPACE=y
 CONFIG_BOOT_ELF32=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -93,10 +91,6 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 #
 # CPU selection
 #
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_CPU_LOONGSON2 is not set
 # CONFIG_CPU_MIPS32_R1 is not set
 # CONFIG_CPU_MIPS32_R2 is not set
@@ -137,14 +131,15 @@ CONFIG_PAGE_SIZE_4KB=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_SYS_SUPPORTS_HIGHMEM=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -152,13 +147,19 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_RESOURCES_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
 CONFIG_SMP=y
 CONFIG_SYS_SUPPORTS_SMP=y
 CONFIG_NR_CPUS_DEFAULT_4=y
 CONFIG_NR_CPUS=4
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -171,38 +172,45 @@ CONFIG_HZ=1000
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
 # CONFIG_KEXEC is not set
+CONFIG_SECCOMP=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-# CONFIG_CPUSETS is not set
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
@@ -211,24 +219,33 @@ CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
@@ -236,12 +253,10 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_BLOCK_COMPAT=y
 
 #
 # IO Schedulers
@@ -255,6 +270,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
@@ -262,23 +278,19 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
 CONFIG_PCI_DEBUG=y
 CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
-# PCI Hotplug Support
-#
+CONFIG_ZONE_DMA32=y
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
 
 #
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-# CONFIG_BUILD_ELF64 is not set
 CONFIG_MIPS32_COMPAT=y
 CONFIG_COMPAT=y
 CONFIG_SYSVIPC_COMPAT=y
@@ -292,7 +304,6 @@ CONFIG_BINFMT_ELF32=y
 CONFIG_PM=y
 # CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
 
 #
 # Networking
@@ -302,7 +313,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -310,10 +320,11 @@ CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
@@ -322,41 +333,141 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_IP_PNP_RARP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
 # CONFIG_ARPD is not set
 # CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 CONFIG_TCP_MD5SIG=y
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
+CONFIG_IP_VS=m
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_IPV6_OPTIMISTIC_DAD=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
 CONFIG_NETWORK_SECMARK=y
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_ADVANCED is not set
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_SECMARK=y
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+# CONFIG_NF_NAT_TFTP is not set
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_H323 is not set
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -369,10 +480,6 @@ CONFIG_NETWORK_SECMARK=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -380,9 +487,21 @@ CONFIG_NETWORK_SECMARK=y
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -391,85 +510,70 @@ CONFIG_NETWORK_SECMARK=y
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 # CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_BLK_DEV_NBD=m
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_SGI_IOC4=m
 # CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
 CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 CONFIG_BLK_DEV_IDETAPE=y
 CONFIG_BLK_DEV_IDEFLOPPY=y
+# CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
 
 #
 # IDE chipset support/bugfixes
 #
 CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
 CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
+CONFIG_IDEPCI_PCIBUS_ORDER=y
 # CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
 # CONFIG_BLK_DEV_OPTI621 is not set
 CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_PCI_AUTO is not set
 # CONFIG_BLK_DEV_AEC62XX is not set
 # CONFIG_BLK_DEV_ALI15X3 is not set
 # CONFIG_BLK_DEV_AMD74XX is not set
@@ -495,87 +599,196 @@ CONFIG_BLK_DEV_IT8213=m
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 CONFIG_BLK_DEV_TC86C001=m
 # CONFIG_BLK_DEV_IDE_SWARM is not set
-# CONFIG_IDE_ARM is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_IDEDMA_AUTO is not set
+CONFIG_IDE_ARCH_OBSOLETE_INIT=y
 # CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+CONFIG_SATA_SIL24=y
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+CONFIG_PATA_SIL680=y
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
 # CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+# CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
 # CONFIG_I2O is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -585,52 +798,53 @@ CONFIG_SB1250_MAC=y
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
+CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 CONFIG_CHELSIO_T3=m
+# CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
 CONFIG_NETXEN_NIC=m
-
-#
-# Token Ring devices
-#
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
 # CONFIG_TR is not set
 
 #
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
+CONFIG_SLIP_SMART=y
+CONFIG_SLIP_MODE_SLIP6=y
+# CONFIG_NET_FC is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -660,17 +874,16 @@ CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_DIGIEPCA is not set
 # CONFIG_MOXA_INTELLIO is not set
 # CONFIG_MOXA_SMARTIO is not set
-CONFIG_MOXA_SMARTIO_NEW=m
 # CONFIG_ISI is not set
 # CONFIG_SYNCLINKMP is not set
 # CONFIG_SYNCLINK_GT is not set
 # CONFIG_N_HDLC is not set
+# CONFIG_RISCOM8 is not set
 # CONFIG_SPECIALIX is not set
 # CONFIG_SX is not set
 # CONFIG_RIO is not set
 # CONFIG_STALDRV is not set
-CONFIG_SERIAL_SB1250_DUART=y
-CONFIG_SERIAL_SB1250_DUART_CONSOLE=y
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -680,39 +893,24 @@ CONFIG_SERIAL_SB1250_DUART_CONSOLE=y
 #
 # Non-8250 serial port support
 #
+CONFIG_SERIAL_SB1250_DUART=y
+CONFIG_SERIAL_SB1250_DUART_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
 CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
 
 #
@@ -736,29 +934,30 @@ CONFIG_I2C_CHARDEV=y
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PASEMI is not set
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
 CONFIG_I2C_SIBYTE=y
+# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_STUB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
 
 #
 # Miscellaneous I2C Chip support
 #
-CONFIG_SENSORS_DS1337=y
-CONFIG_SENSORS_DS1374=y
+# CONFIG_DS1682 is not set
 CONFIG_SENSORS_EEPROM=y
 CONFIG_SENSORS_PCF8574=y
-CONFIG_SENSORS_PCA9539=y
+# CONFIG_PCF8575 is not set
 CONFIG_SENSORS_PCF8591=y
+# CONFIG_TPS65010 is not set
 CONFIG_SENSORS_MAX6875=y
+# CONFIG_SENSORS_TSL2550 is not set
 CONFIG_I2C_DEBUG_CORE=y
 CONFIG_I2C_DEBUG_ALGO=y
 CONFIG_I2C_DEBUG_BUS=y
@@ -769,43 +968,49 @@ CONFIG_I2C_DEBUG_CHIP=y
 #
 # CONFIG_SPI is not set
 # CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Dallas's 1-wire bus
+# Sonics Silicon Backplane
 #
-# CONFIG_W1 is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# Hardware Monitoring support
+# Multifunction device drivers
 #
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+# CONFIG_MFD_SM501 is not set
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Sound
+# Display device support
 #
-# CONFIG_SOUND is not set
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
-# USB support
+# Sound
 #
+# CONFIG_SOUND is not set
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
@@ -814,104 +1019,73 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
 # CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
+CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 
 #
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
+# Userspace I/O
 #
+# CONFIG_UIO is not set
 
 #
 # File systems
 #
-CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS=m
 CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_POSIX_ACL is not set
+# CONFIG_EXT2_FS_SECURITY is not set
 # CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=m
+CONFIG_QUOTACTL=y
+CONFIG_AUTOFS_FS=m
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
 #
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
 
 #
 # DOS/FAT/NT Filesystems
 #
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
 
 #
 # Pseudo filesystems
@@ -923,7 +1097,6 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 CONFIG_CONFIGFS_FS=m
 
 #
@@ -939,14 +1112,13 @@ CONFIG_CONFIGFS_FS=m
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
@@ -958,6 +1130,7 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -965,37 +1138,61 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
 CONFIG_DLM=m
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
 # CONFIG_DLM_DEBUG is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
@@ -1003,8 +1200,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=16
 CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_SLAB is not set
@@ -1014,15 +1211,19 @@ CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_LOCK_ALLOC is not set
 # CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
-CONFIG_FORCED_INLINING=y
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
-CONFIG_CROSSCOMPILE=y
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
 CONFIG_CMDLINE=""
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_SB1XXX_CORELIS is not set
@@ -1034,23 +1235,22 @@ CONFIG_CMDLINE=""
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_SEQIV=m
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_GF128MUL=m
@@ -1058,39 +1258,50 @@ CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_CBC=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_TWOFISH_COMMON=y
-CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
 CONFIG_CRYPTO_TEA=m
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
 # CONFIG_CRYPTO_CRC32C is not set
 CONFIG_CRYPTO_CAMELLIA=m
 # CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
+CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/mips/kernel/gdb-stub.c b/arch/mips/kernel/gdb-stub.c
index 3191afa..25f4eab 100644
--- a/arch/mips/kernel/gdb-stub.c
+++ b/arch/mips/kernel/gdb-stub.c
@@ -139,7 +139,6 @@
 #include <asm/system.h>
 #include <asm/gdb-stub.h>
 #include <asm/inst.h>
-#include <asm/smp.h>
 
 /*
  * external low-level support routines
@@ -656,6 +655,7 @@ void set_async_breakpoint(unsigned long *epc)
 	*epc = (unsigned long)async_breakpoint;
 }
 
+#ifdef CONFIG_SMP
 static void kgdb_wait(void *arg)
 {
 	unsigned flags;
@@ -668,6 +668,7 @@ static void kgdb_wait(void *arg)
 
 	local_irq_restore(flags);
 }
+#endif
 
 /*
  * GDB stub needs to call kgdb_wait on all processor with interrupts
diff --git a/arch/mips/kernel/i8253.c b/arch/mips/kernel/i8253.c
index fc4aa07..38fa1a1 100644
--- a/arch/mips/kernel/i8253.c
+++ b/arch/mips/kernel/i8253.c
@@ -15,6 +15,7 @@
 #include <asm/time.h>
 
 DEFINE_SPINLOCK(i8253_lock);
+EXPORT_SYMBOL(i8253_lock);
 
 /*
  * Initialize the PIT timer.
diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c
index 9f85d4c..b45a709 100644
--- a/arch/mips/kernel/time.c
+++ b/arch/mips/kernel/time.c
@@ -157,6 +157,6 @@ void __init time_init(void)
 {
 	plat_time_init();
 
-	if (mips_clockevent_init() || !cpu_has_mfc0_count_bug())
+	if (!mips_clockevent_init() || !cpu_has_mfc0_count_bug())
 		init_mips_clocksource();
 }
diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
index eed2dc4..39804c5 100644
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -262,13 +262,21 @@ void dump_mtregs(void)
 /* Find some VPE program space  */
 static void *alloc_progmem(unsigned long len)
 {
+	void *addr;
+
 #ifdef CONFIG_MIPS_VPE_LOADER_TOM
-	/* this means you must tell linux to use less memory than you physically have */
-	return pfn_to_kaddr(max_pfn);
+	/*
+	 * This means you must tell Linux to use less memory than you
+	 * physically have, for example by passing a mem= boot argument.
+	 */
+	addr = pfn_to_kaddr(max_pfn);
+	memset(addr, 0, len);
 #else
-	// simple grab some mem for now
-	return kmalloc(len, GFP_KERNEL);
+	/* simple grab some mem for now */
+	addr = kzalloc(len, GFP_KERNEL);
 #endif
+
+	return addr;
 }
 
 static void release_progmem(void *ptr)
@@ -884,9 +892,10 @@ static int vpe_elfload(struct vpe * v)
 	}
 
 	v->load_addr = alloc_progmem(mod.core_size);
-	memset(v->load_addr, 0, mod.core_size);
+	if (!v->load_addr)
+		return -ENOMEM;
 
-	printk("VPE loader: loading to %p\n", v->load_addr);
+	pr_info("VPE loader: loading to %p\n", v->load_addr);
 
 	if (relocate) {
 		for (i = 0; i < hdr->e_shnum; i++) {
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index 6496925..77aefb4 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -361,6 +361,16 @@ static inline int has_valid_asid(const struct mm_struct *mm)
 #endif
 }
 
+static void r4k__flush_cache_vmap(void)
+{
+	r4k_blast_dcache();
+}
+
+static void r4k__flush_cache_vunmap(void)
+{
+	r4k_blast_dcache();
+}
+
 static inline void local_r4k_flush_cache_range(void * args)
 {
 	struct vm_area_struct *vma = args;
@@ -1281,6 +1291,10 @@ void __cpuinit r4k_cache_init(void)
 					PAGE_SIZE - 1);
 	else
 		shm_align_mask = PAGE_SIZE-1;
+
+	__flush_cache_vmap	= r4k__flush_cache_vmap;
+	__flush_cache_vunmap	= r4k__flush_cache_vunmap;
+
 	flush_cache_all		= cache_noop;
 	__flush_cache_all	= r4k___flush_cache_all;
 	flush_cache_mm		= r4k_flush_cache_mm;
diff --git a/arch/mips/mm/c-tx39.c b/arch/mips/mm/c-tx39.c
index b09d569..a9f7f1f 100644
--- a/arch/mips/mm/c-tx39.c
+++ b/arch/mips/mm/c-tx39.c
@@ -122,6 +122,16 @@ static inline void tx39_blast_icache(void)
 	local_irq_restore(flags);
 }
 
+static void tx39__flush_cache_vmap(void)
+{
+	tx39_blast_dcache();
+}
+
+static void tx39__flush_cache_vunmap(void)
+{
+	tx39_blast_dcache();
+}
+
 static inline void tx39_flush_cache_all(void)
 {
 	if (!cpu_has_dc_aliases)
@@ -344,6 +354,8 @@ void __cpuinit tx39_cache_init(void)
 	switch (current_cpu_type()) {
 	case CPU_TX3912:
 		/* TX39/H core (writethru direct-map cache) */
+		__flush_cache_vmap	= tx39__flush_cache_vmap;
+		__flush_cache_vunmap	= tx39__flush_cache_vunmap;
 		flush_cache_all	= tx39h_flush_icache_all;
 		__flush_cache_all	= tx39h_flush_icache_all;
 		flush_cache_mm		= (void *) tx39h_flush_icache_all;
@@ -369,6 +381,9 @@ void __cpuinit tx39_cache_init(void)
 		write_c0_wired(0);	/* set 8 on reset... */
 		/* board-dependent init code may set WBON */
 
+		__flush_cache_vmap	= tx39__flush_cache_vmap;
+		__flush_cache_vunmap	= tx39__flush_cache_vunmap;
+
 		flush_cache_all = tx39_flush_cache_all;
 		__flush_cache_all = tx39___flush_cache_all;
 		flush_cache_mm = tx39_flush_cache_mm;
diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c
index 51ab1fa..f590367 100644
--- a/arch/mips/mm/cache.c
+++ b/arch/mips/mm/cache.c
@@ -30,6 +30,9 @@ void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page,
 	unsigned long pfn);
 void (*flush_icache_range)(unsigned long start, unsigned long end);
 
+void (*__flush_cache_vmap)(void);
+void (*__flush_cache_vunmap)(void);
+
 /* MIPS specific cache operations */
 void (*flush_cache_sigtramp)(unsigned long addr);
 void (*local_flush_data_cache_page)(void * addr);
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 3a93d4c..382738c 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -307,6 +307,7 @@ static void __cpuinit build_tlb_write_entry(u32 **p, struct uasm_label **l,
 	case CPU_R12000:
 	case CPU_R14000:
 	case CPU_4KC:
+	case CPU_4KEC:
 	case CPU_SB1:
 	case CPU_SB1A:
 	case CPU_4KSC:
diff --git a/arch/mips/pci/pci-bcm1480.c b/arch/mips/pci/pci-bcm1480.c
index ab68c43..87e2c8f 100644
--- a/arch/mips/pci/pci-bcm1480.c
+++ b/arch/mips/pci/pci-bcm1480.c
@@ -185,8 +185,8 @@ static struct resource bcm1480_mem_resource = {
 
 static struct resource bcm1480_io_resource = {
 	.name	= "BCM1480 PCI I/O",
-	.start	= 0x2c000000UL,
-	.end	= 0x2dffffffUL,
+	.start	= A_BCM1480_PHYS_PCI_IO_MATCH_BYTES,
+	.end	= A_BCM1480_PHYS_PCI_IO_MATCH_BYTES + 0x1ffffffUL,
 	.flags	= IORESOURCE_IO,
 };
 
@@ -194,6 +194,7 @@ struct pci_controller bcm1480_controller = {
 	.pci_ops	= &bcm1480_pci_ops,
 	.mem_resource	= &bcm1480_mem_resource,
 	.io_resource	= &bcm1480_io_resource,
+	.io_offset      = A_BCM1480_PHYS_PCI_IO_MATCH_BYTES,
 };
 
 
@@ -251,6 +252,7 @@ static int __init bcm1480_pcibios_init(void)
 
 	bcm1480_controller.io_map_base = (unsigned long)
 		ioremap(A_BCM1480_PHYS_PCI_IO_MATCH_BYTES, 65536);
+	bcm1480_controller.io_map_base -= bcm1480_controller.io_offset;
 	set_io_port_base(bcm1480_controller.io_map_base);
 	isa_slot_offset = (unsigned long)
 		ioremap(A_BCM1480_PHYS_PCI_MEM_MATCH_BYTES, 1024*1024);
diff --git a/arch/mips/pci/pci-bcm1480ht.c b/arch/mips/pci/pci-bcm1480ht.c
index 005e7fe..f54f454 100644
--- a/arch/mips/pci/pci-bcm1480ht.c
+++ b/arch/mips/pci/pci-bcm1480ht.c
@@ -180,8 +180,8 @@ static struct resource bcm1480ht_mem_resource = {
 
 static struct resource bcm1480ht_io_resource = {
 	.name	= "BCM1480 HT I/O",
-	.start	= 0x00000000UL,
-	.end	= 0x01ffffffUL,
+	.start	= A_BCM1480_PHYS_HT_IO_MATCH_BYTES,
+	.end	= A_BCM1480_PHYS_HT_IO_MATCH_BYTES + 0x01ffffffUL,
 	.flags	= IORESOURCE_IO,
 };
 
@@ -191,29 +191,22 @@ struct pci_controller bcm1480ht_controller = {
 	.io_resource	= &bcm1480ht_io_resource,
 	.index		= 1,
 	.get_busno	= bcm1480ht_pcibios_get_busno,
+	.io_offset      = A_BCM1480_PHYS_HT_IO_MATCH_BYTES,
 };
 
 static int __init bcm1480ht_pcibios_init(void)
 {
-	uint32_t cmdreg;
-
 	ht_cfg_space = ioremap(A_BCM1480_PHYS_HT_CFG_MATCH_BITS, 16*1024*1024);
 
-	/*
-	 * See if the PCI bus has been configured by the firmware.
-	 */
-	cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0),
-				     PCI_COMMAND));
-	if (!(cmdreg & PCI_COMMAND_MASTER)) {
-		printk("HT: Skipping HT probe. Bus is not initialized.\n");
-		iounmap(ht_cfg_space);
-		return 1; /* XXX */
-	}
+	/* CFE doesn't always init all HT paths, so we always scan */
 	bcm1480ht_bus_status |= PCI_BUS_ENABLED;
 
 	ht_eoi_space = (unsigned long)
 		ioremap(A_BCM1480_PHYS_HT_SPECIAL_MATCH_BYTES,
 			4 * 1024 * 1024);
+	bcm1480ht_controller.io_map_base = (unsigned long)
+		ioremap(A_BCM1480_PHYS_HT_IO_MATCH_BYTES, 65536);
+	bcm1480ht_controller.io_map_base -= bcm1480ht_controller.io_offset;
 
 	register_pci_controller(&bcm1480ht_controller);
 
diff --git a/arch/powerpc/boot/dts/cm5200.dts b/arch/powerpc/boot/dts/cm5200.dts
index 30737ea..c6ca631 100644
--- a/arch/powerpc/boot/dts/cm5200.dts
+++ b/arch/powerpc/boot/dts/cm5200.dts
@@ -212,13 +212,30 @@
 		ethernet@3000 {
 			device_type = "network";
 			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
-			reg = <3000 800>;
+			reg = <3000 400>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <2 5 0>;
 			interrupt-parent = <&mpc5200_pic>;
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
+			reg = <3000 400>;       // fec range, since we need to setup fec interrupts
+			interrupts = <2 5 0>;   // these are for "mii command finished", not link changes & co.
+			interrupt-parent = <&mpc5200_pic>;
+
+			phy0: ethernet-phy@0 {
+				device_type = "ethernet-phy";
+				reg = <0>;
+			};
 		};
 
 		i2c@3d40 {
+			#address-cells = <1>;
+			#size-cells = <0>;
 			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 			reg = <3d40 40>;
 			interrupts = <2 10 0>;
@@ -231,4 +248,22 @@
 			reg = <8000 4000>;
 		};
 	};
+
+	lpb {
+		model = "fsl,lpb";
+		compatible = "fsl,lpb";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 fc000000 2000000>;
+
+		// 16-bit flash device at LocalPlus Bus CS0
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 2000000>;
+			bank-width = <2>;
+			device-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+		};
+	};
 };
diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts
index 0d701c1..09b4e16 100644
--- a/arch/powerpc/boot/dts/lite5200.dts
+++ b/arch/powerpc/boot/dts/lite5200.dts
@@ -258,6 +258,21 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <2 5 0>;
 			interrupt-parent = <&mpc5200_pic>;
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200-mdio";
+			reg = <3000 400>;	// fec range, since we need to setup fec interrupts
+			interrupts = <2 5 0>;	// these are for "mii command finished", not link changes & co.
+			interrupt-parent = <&mpc5200_pic>;
+
+			phy0:ethernet-phy@1 {
+				device_type = "ethernet-phy";
+				reg = <1>;
+			};
 		};
 
 		ata@3a00 {
diff --git a/arch/powerpc/boot/dts/motionpro.dts b/arch/powerpc/boot/dts/motionpro.dts
index 76951ab..2b0dde0 100644
--- a/arch/powerpc/boot/dts/motionpro.dts
+++ b/arch/powerpc/boot/dts/motionpro.dts
@@ -148,7 +148,6 @@
 			interrupt-parent = <&mpc5200_pic>;
 		};
 
-
 		spi@f00 {
 			compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
 			reg = <f00 20>;
@@ -209,10 +208,25 @@
 		ethernet@3000 {
 			device_type = "network";
 			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
-			reg = <3000 800>;
+			reg = <3000 400>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <2 5 0>;
 			interrupt-parent = <&mpc5200_pic>;
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
+			reg = <3000 400>;       // fec range, since we need to setup fec interrupts
+			interrupts = <2 5 0>;   // these are for "mii command finished", not link changes & co.
+			interrupt-parent = <&mpc5200_pic>;
+
+			phy0: ethernet-phy@2 {
+				device_type = "ethernet-phy";
+				reg = <2>;
+			};
 		};
 
 		ata@3a00 {
@@ -223,11 +237,19 @@
 		};
 
 		i2c@3d40 {
+			#address-cells = <1>;
+			#size-cells = <0>;
 			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 			reg = <3d40 40>;
 			interrupts = <2 10 0>;
 			interrupt-parent = <&mpc5200_pic>;
 			fsl5200-clocking;
+
+			rtc@68 {
+				device_type = "rtc";
+				compatible = "dallas,ds1339";
+				reg = <68>;
+			};
 		};
 
 		sram@8000 {
@@ -240,7 +262,8 @@
 		compatible = "fsl,lpb";
 		#address-cells = <2>;
 		#size-cells = <1>;
-		ranges = <1 0 50000000 00010000
+		ranges = <0 0 ff000000 01000000
+			  1 0 50000000 00010000
 			  2 0 50010000 00010000
 			  3 0 50020000 00010000>;
 
@@ -271,31 +294,15 @@
 			compatible = "promess,pro_module_dio";
 			reg = <3 800 2>;
 		};
-	};
 
-	pci@f0000d00 {
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
-		reg = <f0000d00 100>;
-		interrupt-map-mask = <f800 0 0 7>;
-		interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
-				 c000 0 0 2 &mpc5200_pic 1 1 3
-				 c000 0 0 3 &mpc5200_pic 1 2 3
-				 c000 0 0 4 &mpc5200_pic 1 3 3
-
-				 c800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
-				 c800 0 0 2 &mpc5200_pic 1 2 3
-				 c800 0 0 3 &mpc5200_pic 1 3 3
-				 c800 0 0 4 &mpc5200_pic 0 0 3>;
-		clock-frequency = <0>; // From boot loader
-		interrupts = <2 8 0 2 9 0 2 a 0>;
-		interrupt-parent = <&mpc5200_pic>;
-		bus-range = <0 0>;
-		ranges = <42000000 0 80000000 80000000 0 20000000
-			  02000000 0 a0000000 a0000000 0 10000000
-			  01000000 0 00000000 b0000000 0 01000000>;
+		// 16-bit flash device at LocalPlus Bus CS0
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 01000000>;
+			bank-width = <2>;
+			device-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts
index 49c05e9..eac8e1b 100644
--- a/arch/powerpc/boot/dts/mpc8377_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8377_mds.dts
@@ -255,14 +255,14 @@
 		};
 
 		sata@18000 {
-			compatible = "fsl,mpc8379-sata";
+			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
 			reg = <0x18000 0x1000>;
 			interrupts = <44 0x8>;
 			interrupt-parent = <&ipic>;
 		};
 
 		sata@19000 {
-			compatible = "fsl,mpc8379-sata";
+			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
 			reg = <0x19000 0x1000>;
 			interrupts = <45 0x8>;
 			interrupt-parent = <&ipic>;
diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts
index 440aa4d..5bc09ad 100644
--- a/arch/powerpc/boot/dts/mpc8377_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts
@@ -143,7 +143,6 @@
 			mode = "cpu";
 		};
 
-		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
 		usb@23000 {
 			compatible = "fsl-usb2-dr";
 			reg = <0x23000 0x1000>;
@@ -151,7 +150,7 @@
 			#size-cells = <0>;
 			interrupt-parent = <&ipic>;
 			interrupts = <38 0x8>;
-			phy_type = "utmi";
+			phy_type = "ulpi";
 		};
 
 		mdio@24520 {
diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts
index 9271153..711f9a3 100644
--- a/arch/powerpc/boot/dts/mpc8378_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts
@@ -143,7 +143,6 @@
 			mode = "cpu";
 		};
 
-		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
 		usb@23000 {
 			compatible = "fsl-usb2-dr";
 			reg = <0x23000 0x1000>;
@@ -151,7 +150,7 @@
 			#size-cells = <0>;
 			interrupt-parent = <&ipic>;
 			interrupts = <38 0x8>;
-			phy_type = "utmi";
+			phy_type = "ulpi";
 		};
 
 		mdio@24520 {
diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts
index fdb4a92..6f78a9f 100644
--- a/arch/powerpc/boot/dts/mpc8379_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8379_mds.dts
@@ -255,28 +255,28 @@
 		};
 
 		sata@18000 {
-			compatible = "fsl,mpc8379-sata";
+			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
 			reg = <0x18000 0x1000>;
 			interrupts = <44 0x8>;
 			interrupt-parent = <&ipic>;
 		};
 
 		sata@19000 {
-			compatible = "fsl,mpc8379-sata";
+			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
 			reg = <0x19000 0x1000>;
 			interrupts = <45 0x8>;
 			interrupt-parent = <&ipic>;
 		};
 
 		sata@1a000 {
-			compatible = "fsl,mpc8379-sata";
+			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
 			reg = <0x1a000 0x1000>;
 			interrupts = <46 0x8>;
 			interrupt-parent = <&ipic>;
 		};
 
 		sata@1b000 {
-			compatible = "fsl,mpc8379-sata";
+			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
 			reg = <0x1b000 0x1000>;
 			interrupts = <47 0x8>;
 			interrupt-parent = <&ipic>;
diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts
index 0dda2fc..c11ceb7 100644
--- a/arch/powerpc/boot/dts/mpc8379_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts
@@ -143,7 +143,6 @@
 			mode = "cpu";
 		};
 
-		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
 		usb@23000 {
 			compatible = "fsl-usb2-dr";
 			reg = <0x23000 0x1000>;
@@ -151,7 +150,7 @@
 			#size-cells = <0>;
 			interrupt-parent = <&ipic>;
 			interrupts = <38 0x8>;
-			phy_type = "utmi";
+			phy_type = "ulpi";
 		};
 
 		mdio@24520 {
diff --git a/arch/powerpc/boot/dts/tqm5200.dts b/arch/powerpc/boot/dts/tqm5200.dts
index c86464f..65bcea6 100644
--- a/arch/powerpc/boot/dts/tqm5200.dts
+++ b/arch/powerpc/boot/dts/tqm5200.dts
@@ -127,10 +127,25 @@
 		ethernet@3000 {
 			device_type = "network";
 			compatible = "fsl,mpc5200-fec";
-			reg = <3000 800>;
+			reg = <3000 400>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <2 5 0>;
 			interrupt-parent = <&mpc5200_pic>;
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
+			reg = <3000 400>;       // fec range, since we need to setup fec interrupts
+			interrupts = <2 5 0>;   // these are for "mii command finished", not link changes & co.
+			interrupt-parent = <&mpc5200_pic>;
+
+			phy0: ethernet-phy@0 {
+				device_type = "ethernet-phy";
+				reg = <0>;
+			};
 		};
 
 		ata@3a00 {
@@ -141,11 +156,19 @@
 		};
 
 		i2c@3d40 {
+			#address-cells = <1>;
+			#size-cells = <0>;
 			compatible = "fsl,mpc5200-i2c","fsl-i2c";
 			reg = <3d40 40>;
 			interrupts = <2 10 0>;
 			interrupt-parent = <&mpc5200_pic>;
 			fsl5200-clocking;
+
+			 rtc@68 {
+				device_type = "rtc";
+				compatible = "dallas,ds1307";
+				reg = <68>;
+			};
 		};
 
 		sram@8000 {
@@ -154,6 +177,23 @@
 		};
 	};
 
+	lpb {
+		model = "fsl,lpb";
+		compatible = "fsl,lpb";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 fc000000 02000000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 02000000>;
+			bank-width = <4>;
+			device-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+		};
+	};
+
 	pci@f0000d00 {
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
diff --git a/arch/powerpc/configs/mpc832x_mds_defconfig b/arch/powerpc/configs/mpc832x_mds_defconfig
index 79d228f..50cceda 100644
--- a/arch/powerpc/configs/mpc832x_mds_defconfig
+++ b/arch/powerpc/configs/mpc832x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:16 2008
+# Linux kernel version: 2.6.25-rc7
+# Mon Mar 31 11:36:51 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -628,8 +628,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
+# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -824,10 +823,6 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_EDAC is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-
-#
-# Conflicting RTC option has been selected, check GEN_RTC and RTC
-#
 CONFIG_RTC_HCTOSYS=y
 CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
 # CONFIG_RTC_DEBUG is not set
diff --git a/arch/powerpc/configs/mpc834x_mds_defconfig b/arch/powerpc/configs/mpc834x_mds_defconfig
index 9360144..b4e82c0 100644
--- a/arch/powerpc/configs/mpc834x_mds_defconfig
+++ b/arch/powerpc/configs/mpc834x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:20 2008
+# Linux kernel version: 2.6.25-rc7
+# Mon Mar 31 11:36:56 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -571,8 +571,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
+# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -767,10 +766,6 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_EDAC is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-
-#
-# Conflicting RTC option has been selected, check GEN_RTC and RTC
-#
 CONFIG_RTC_HCTOSYS=y
 CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
 # CONFIG_RTC_DEBUG is not set
diff --git a/arch/powerpc/configs/mpc836x_mds_defconfig b/arch/powerpc/configs/mpc836x_mds_defconfig
index 7c8b060..d50a96e 100644
--- a/arch/powerpc/configs/mpc836x_mds_defconfig
+++ b/arch/powerpc/configs/mpc836x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:21 2008
+# Linux kernel version: 2.6.25-rc7
+# Mon Mar 31 11:36:57 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -626,8 +626,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
+# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -822,10 +821,6 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_EDAC is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-
-#
-# Conflicting RTC option has been selected, check GEN_RTC and RTC
-#
 CONFIG_RTC_HCTOSYS=y
 CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
 # CONFIG_RTC_DEBUG is not set
diff --git a/arch/powerpc/configs/mpc837x_rdb_defconfig b/arch/powerpc/configs/mpc837x_rdb_defconfig
index 44093a0..a633176 100644
--- a/arch/powerpc/configs/mpc837x_rdb_defconfig
+++ b/arch/powerpc/configs/mpc837x_rdb_defconfig
@@ -684,7 +684,29 @@ CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig
index 1f6cf68..029d2da 100644
--- a/arch/powerpc/configs/mpc83xx_defconfig
+++ b/arch/powerpc/configs/mpc83xx_defconfig
@@ -690,7 +690,29 @@ CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
diff --git a/arch/powerpc/configs/mpc8544_ds_defconfig b/arch/powerpc/configs/mpc8544_ds_defconfig
index c75b6ae..418bcdb 100644
--- a/arch/powerpc/configs/mpc8544_ds_defconfig
+++ b/arch/powerpc/configs/mpc8544_ds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:26 2008
+# Linux kernel version: 2.6.25-rc7
+# Mon Mar 31 11:37:03 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -742,8 +742,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_NVRAM=y
-CONFIG_GEN_RTC=y
-CONFIG_GEN_RTC_X=y
+# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -1209,10 +1208,6 @@ CONFIG_USB_MON=y
 # CONFIG_EDAC is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-
-#
-# Conflicting RTC option has been selected, check GEN_RTC and RTC
-#
 CONFIG_RTC_HCTOSYS=y
 CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
 # CONFIG_RTC_DEBUG is not set
diff --git a/arch/powerpc/configs/mpc8568mds_defconfig b/arch/powerpc/configs/mpc8568mds_defconfig
index e7da4b9..2b866b3 100644
--- a/arch/powerpc/configs/mpc8568mds_defconfig
+++ b/arch/powerpc/configs/mpc8568mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:28 2008
+# Linux kernel version: 2.6.25-rc7
+# Mon Mar 31 11:37:05 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -629,8 +629,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
+# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -825,10 +824,6 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_EDAC is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-
-#
-# Conflicting RTC option has been selected, check GEN_RTC and RTC
-#
 CONFIG_RTC_HCTOSYS=y
 CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
 # CONFIG_RTC_DEBUG is not set
diff --git a/arch/powerpc/configs/mpc8572_ds_defconfig b/arch/powerpc/configs/mpc8572_ds_defconfig
index 460afe9..53aa6f3 100644
--- a/arch/powerpc/configs/mpc8572_ds_defconfig
+++ b/arch/powerpc/configs/mpc8572_ds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:29 2008
+# Linux kernel version: 2.6.25-rc7
+# Mon Mar 31 11:37:06 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -742,8 +742,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_NVRAM=y
-CONFIG_GEN_RTC=y
-CONFIG_GEN_RTC_X=y
+# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -1209,10 +1208,6 @@ CONFIG_USB_MON=y
 # CONFIG_EDAC is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-
-#
-# Conflicting RTC option has been selected, check GEN_RTC and RTC
-#
 CONFIG_RTC_HCTOSYS=y
 CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
 # CONFIG_RTC_DEBUG is not set
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index 615e4c1..2075722 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:31 2008
+# Linux kernel version: 2.6.25-rc7
+# Mon Mar 31 11:37:08 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -750,8 +750,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_NVRAM=y
-CONFIG_GEN_RTC=y
-CONFIG_GEN_RTC_X=y
+# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -1217,10 +1216,6 @@ CONFIG_USB_MON=y
 # CONFIG_EDAC is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-
-#
-# Conflicting RTC option has been selected, check GEN_RTC and RTC
-#
 CONFIG_RTC_HCTOSYS=y
 CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
 # CONFIG_RTC_DEBUG is not set
diff --git a/arch/powerpc/configs/mpc8641_hpcn_defconfig b/arch/powerpc/configs/mpc8641_hpcn_defconfig
index 994e768..d01dcdb 100644
--- a/arch/powerpc/configs/mpc8641_hpcn_defconfig
+++ b/arch/powerpc/configs/mpc8641_hpcn_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:34 2008
+# Linux kernel version: 2.6.25-rc7
+# Mon Mar 31 11:37:11 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -736,8 +736,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_NVRAM=y
-CONFIG_GEN_RTC=y
-CONFIG_GEN_RTC_X=y
+# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -1203,10 +1202,6 @@ CONFIG_USB_MON=y
 # CONFIG_EDAC is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-
-#
-# Conflicting RTC option has been selected, check GEN_RTC and RTC
-#
 CONFIG_RTC_HCTOSYS=y
 CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
 # CONFIG_RTC_DEBUG is not set
diff --git a/arch/powerpc/configs/pasemi_defconfig b/arch/powerpc/configs/pasemi_defconfig
index 797f0df..09f3062 100644
--- a/arch/powerpc/configs/pasemi_defconfig
+++ b/arch/powerpc/configs/pasemi_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc6
-# Tue Jan 15 10:26:10 2008
+# Linux kernel version: 2.6.25-rc6
+# Tue Mar 25 10:25:48 2008
 #
 CONFIG_PPC64=y
 
@@ -27,6 +27,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -67,17 +68,19 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -91,11 +94,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -103,6 +108,15 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -130,6 +144,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform support
@@ -140,8 +155,8 @@ CONFIG_PPC_MULTIPLATFORM=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_PPC_PSERIES is not set
 # CONFIG_PPC_ISERIES is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_MAPLE is not set
 CONFIG_PPC_PASEMI=y
@@ -159,6 +174,7 @@ CONFIG_PPC_PASEMI_MDIO=y
 # CONFIG_PPC_IBM_CELL_BLADE is not set
 # CONFIG_PQ2ADS is not set
 CONFIG_PPC_NATIVE=y
+# CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
@@ -189,7 +205,6 @@ CONFIG_CPU_FREQ_GOV_ONDEMAND=y
 # CPU Frequency drivers
 #
 CONFIG_PPC_PASEMI_CPUFREQ=y
-# CONFIG_CPM2 is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -204,16 +219,20 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_300 is not set
 CONFIG_HZ_1000=y
 CONFIG_HZ=1000
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
 CONFIG_BINFMT_ELF=y
+CONFIG_COMPAT_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_FORCE_MAX_ZONEORDER=9
 CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
 CONFIG_IOMMU_VMERGE=y
+CONFIG_IOMMU_HELPER=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
 # CONFIG_IRQ_ALL_CPUS is not set
@@ -236,12 +255,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_PPC_HAS_HASH_64K=y
 CONFIG_PPC_64K_PAGES=y
+# CONFIG_PPC_SUBPAGE_PROT is not set
 # CONFIG_SCHED_SMT is not set
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
-# CONFIG_WANT_DEVICE_TREE is not set
 CONFIG_ISA_DMA_API=y
 
 #
@@ -290,6 +309,7 @@ CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -346,6 +366,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -441,8 +462,10 @@ CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_CAFE is not set
+CONFIG_MTD_NAND_PASEMI=y
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_NAND_FSL_ELBC is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
@@ -465,7 +488,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
@@ -473,11 +496,13 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
@@ -485,6 +510,7 @@ CONFIG_IDEDISK_MULTI_MODE=y
 # CONFIG_BLK_DEV_IDECS is not set
 # CONFIG_BLK_DEV_DELKIN is not set
 CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 CONFIG_BLK_DEV_IDESCSI=y
@@ -500,7 +526,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # PCI IDE chipsets support
 #
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
 # CONFIG_BLK_DEV_GENERIC is not set
 # CONFIG_BLK_DEV_OPTI621 is not set
 # CONFIG_BLK_DEV_AEC62XX is not set
@@ -528,7 +553,6 @@ CONFIG_IDE_PROC_FS=y
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
 CONFIG_IDE_ARCH_OBSOLETE_INIT=y
 # CONFIG_BLK_DEV_HD is not set
@@ -593,6 +617,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -646,6 +671,7 @@ CONFIG_ATA_GENERIC=y
 # CONFIG_PATA_MPIIX is not set
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
 # CONFIG_PATA_NS87410 is not set
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
@@ -699,7 +725,6 @@ CONFIG_DUMMY=y
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
 CONFIG_PHYLIB=y
 
@@ -715,6 +740,7 @@ CONFIG_MARVELL_PHY=y
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -742,6 +768,7 @@ CONFIG_NET_PCI=y
 # CONFIG_NE2K_PCI is not set
 # CONFIG_8139CP is not set
 # CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
@@ -754,6 +781,9 @@ CONFIG_E1000=y
 CONFIG_E1000_NAPI=y
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -779,6 +809,7 @@ CONFIG_NETDEV_10000=y
 CONFIG_PASEMI_MAC=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
 # CONFIG_TR is not set
 
 #
@@ -802,7 +833,6 @@ CONFIG_PASEMI_MAC=y
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -861,6 +891,7 @@ CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -886,8 +917,7 @@ CONFIG_LEGACY_PTY_COUNT=4
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 CONFIG_HW_RANDOM_PASEMI=y
-CONFIG_GEN_RTC=y
-CONFIG_GEN_RTC_X=y
+# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 
@@ -897,6 +927,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_SYNCLINK_CS is not set
 # CONFIG_CARDMAN_4000 is not set
 # CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 CONFIG_RAW_DRIVER=y
 CONFIG_MAX_RAW_DEVS=256
 # CONFIG_HANGCHECK_TIMER is not set
@@ -944,13 +975,12 @@ CONFIG_I2C_PASEMI=y
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 CONFIG_SENSORS_EEPROM=y
 # CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -975,6 +1005,7 @@ CONFIG_HWMON_VID=y
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -1004,6 +1035,7 @@ CONFIG_SENSORS_LM90=y
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
@@ -1013,9 +1045,11 @@ CONFIG_SENSORS_LM90=y
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -1183,6 +1217,7 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_BT87X is not set
 # CONFIG_SND_CA0106 is not set
 # CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
 # CONFIG_SND_CS5530 is not set
@@ -1208,6 +1243,7 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_HDA_INTEL is not set
 # CONFIG_SND_HDSP is not set
 # CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
 # CONFIG_SND_ICE1712 is not set
 # CONFIG_SND_ICE1724 is not set
 # CONFIG_SND_INTEL8X0 is not set
@@ -1225,6 +1261,7 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_TRIDENT is not set
 # CONFIG_SND_VIA82XX is not set
 # CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
 
@@ -1259,6 +1296,10 @@ CONFIG_SND_USB_USX2Y=y
 #
 
 #
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
 # Open Sound System
 #
 # CONFIG_SOUND_PRIME is not set
@@ -1280,6 +1321,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
@@ -1293,17 +1335,14 @@ CONFIG_USB_DEVICEFS=y
 # USB Host Controller Drivers
 #
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
-CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
-# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
-CONFIG_USB_OHCI_HCD_PCI=y
-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+# CONFIG_USB_OHCI_HCD_PPC_OF is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_UHCI_HCD=y
 CONFIG_USB_SL811_HCD=y
@@ -1348,10 +1387,6 @@ CONFIG_USB_LIBUSUAL=y
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -1377,16 +1412,9 @@ CONFIG_USB_LIBUSUAL=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_EDAC=y
@@ -1425,6 +1453,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
 
 #
 # SPI RTC drivers
@@ -1434,9 +1463,10 @@ CONFIG_RTC_DRV_DS1307=y
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -1444,6 +1474,7 @@ CONFIG_RTC_DRV_DS1307=y
 #
 # on-CPU RTC drivers
 #
+# CONFIG_DMADEVICES is not set
 
 #
 # Userspace I/O
@@ -1471,12 +1502,10 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
@@ -1536,8 +1565,10 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1629,7 +1660,6 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
 
 #
 # Library routines
@@ -1647,11 +1677,6 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
@@ -1670,6 +1695,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1682,9 +1708,9 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
-# CONFIG_FORCED_INLINING is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
@@ -1710,7 +1736,9 @@ CONFIG_ASYNC_MEMCPY=y
 CONFIG_ASYNC_XOR=y
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
@@ -1729,6 +1757,9 @@ CONFIG_CRYPTO_CBC=y
 # CONFIG_CRYPTO_PCBC is not set
 # CONFIG_CRYPTO_LRW is not set
 # CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_FCRYPT is not set
@@ -1743,11 +1774,14 @@ CONFIG_CRYPTO_AES=y
 # CONFIG_CRYPTO_KHAZAD is not set
 # CONFIG_CRYPTO_ANUBIS is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_AUTHENC=y
+# CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/prpmc2800_defconfig b/arch/powerpc/configs/prpmc2800_defconfig
index f53d55b..f912168 100644
--- a/arch/powerpc/configs/prpmc2800_defconfig
+++ b/arch/powerpc/configs/prpmc2800_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:37 2008
+# Linux kernel version: 2.6.25-rc7
+# Mon Mar 31 11:37:15 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -855,8 +855,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
+# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -1129,10 +1128,6 @@ CONFIG_USB_MON=y
 # CONFIG_EDAC is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-
-#
-# Conflicting RTC option has been selected, check GEN_RTC and RTC
-#
 CONFIG_RTC_HCTOSYS=y
 CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
 # CONFIG_RTC_DEBUG is not set
diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig
index 8fc8574..fdbfd39 100644
--- a/arch/powerpc/configs/storcenter_defconfig
+++ b/arch/powerpc/configs/storcenter_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:41 2008
+# Linux kernel version: 2.6.25-rc7
+# Mon Mar 31 11:37:19 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -717,8 +717,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=m
 CONFIG_NVRAM=y
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
+# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -931,10 +930,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_EDAC is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-
-#
-# Conflicting RTC option has been selected, check GEN_RTC and RTC
-#
 CONFIG_RTC_HCTOSYS=y
 CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
 # CONFIG_RTC_DEBUG is not set
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 11b4f6d..d3aee08 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -1387,12 +1387,14 @@ __secondary_start:
 #ifdef CONFIG_PPC_ISERIES
 BEGIN_FW_FTR_SECTION
 	ori	r4,r4,MSR_EE
+	li	r8,1
+	stb	r8,PACAHARDIRQEN(r13)
 END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
 #endif
 BEGIN_FW_FTR_SECTION
-	stb	r7,PACASOFTIRQEN(r13)
 	stb	r7,PACAHARDIRQEN(r13)
 END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES)
+	stb	r7,PACASOFTIRQEN(r13)
 
 	mtspr	SPRN_SRR0,r3
 	mtspr	SPRN_SRR1,r4
@@ -1520,15 +1522,14 @@ _INIT_GLOBAL(start_here_common)
 #ifdef CONFIG_PPC_ISERIES
 BEGIN_FW_FTR_SECTION
 	mfmsr	r5
-	ori	r5,r5,MSR_EE		/* Hard Enabled */
+	ori	r5,r5,MSR_EE		/* Hard Enabled on iSeries*/
 	mtmsrd	r5
+	li	r5,1
 END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
 #endif
-BEGIN_FW_FTR_SECTION
-	stb	r5,PACAHARDIRQEN(r13)
-END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES)
+	stb	r5,PACAHARDIRQEN(r13)	/* Hard Disabled on others */
 
-	bl .start_kernel
+	bl	.start_kernel
 
 	/* Not reached */
 	BUG_OPCODE
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index b0e5deb..292163f 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -143,7 +143,6 @@ void local_irq_restore(unsigned long en)
 		 */
 		if (local_paca->lppaca_ptr->int_dword.any_int)
 			iseries_handle_interrupts();
-		return;
 	}
 
 	/*
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 59311ec..4ec6055 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -241,8 +241,12 @@ void discard_lazy_cpu_state(void)
 }
 #endif /* CONFIG_SMP */
 
+static DEFINE_PER_CPU(unsigned long, current_dabr);
+
 int set_dabr(unsigned long dabr)
 {
+	__get_cpu_var(current_dabr) = dabr;
+
 #ifdef CONFIG_PPC_MERGE		/* XXX for now */
 	if (ppc_md.set_dabr)
 		return ppc_md.set_dabr(dabr);
@@ -259,8 +263,6 @@ int set_dabr(unsigned long dabr)
 DEFINE_PER_CPU(struct cpu_usage, cpu_usage_array);
 #endif
 
-static DEFINE_PER_CPU(unsigned long, current_dabr);
-
 struct task_struct *__switch_to(struct task_struct *prev,
 	struct task_struct *new)
 {
@@ -325,10 +327,8 @@ struct task_struct *__switch_to(struct task_struct *prev,
 
 #endif /* CONFIG_SMP */
 
-	if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr)) {
+	if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr))
 		set_dabr(new->thread.dabr);
-		__get_cpu_var(current_dabr) = new->thread.dabr;
-	}
 
 	new_thread = &new->thread;
 	old_thread = &current->thread;
diff --git a/arch/powerpc/kernel/rtas_flash.c b/arch/powerpc/kernel/rtas_flash.c
index f227659..538baf4 100644
--- a/arch/powerpc/kernel/rtas_flash.c
+++ b/arch/powerpc/kernel/rtas_flash.c
@@ -356,7 +356,7 @@ static int rtas_excl_open(struct inode *inode, struct file *file)
 
 	/* Enforce exclusive open with use count of PDE */
 	spin_lock(&flash_file_open_lock);
-	if (atomic_read(&dp->count) > 1) {
+	if (atomic_read(&dp->count) > 2) {
 		spin_unlock(&flash_file_open_lock);
 		return -EBUSY;
 	}
diff --git a/arch/powerpc/mm/hash_low_32.S b/arch/powerpc/mm/hash_low_32.S
index 7f830a4..e10d76a 100644
--- a/arch/powerpc/mm/hash_low_32.S
+++ b/arch/powerpc/mm/hash_low_32.S
@@ -44,6 +44,9 @@ mmu_hash_lock:
 #ifdef CONFIG_SMP
 	.text
 _GLOBAL(hash_page_sync)
+	mfmsr   r10
+	rlwinm  r0,r10,0,17,15          /* clear bit 16 (MSR_EE) */
+	mtmsr   r0
 	lis	r8,mmu_hash_lock@h
 	ori	r8,r8,mmu_hash_lock@l
 	lis	r0,0x0fff
@@ -60,8 +63,9 @@ _GLOBAL(hash_page_sync)
 	eieio
 	li	r0,0
 	stw	r0,0(r8)
-	blr	
-#endif
+	mtmsr	r10
+	blr
+#endif /* CONFIG_SMP */
 
 /*
  * Load a PTE into the hash table, if possible.
diff --git a/arch/powerpc/oprofile/cell/vma_map.c b/arch/powerpc/oprofile/cell/vma_map.c
index 76ec1d1..9a93217 100644
--- a/arch/powerpc/oprofile/cell/vma_map.c
+++ b/arch/powerpc/oprofile/cell/vma_map.c
@@ -92,7 +92,7 @@ vma_map_add(struct vma_to_fileoffset_map *map, unsigned int vma,
  * A pointer to the first vma_map in the generated list
  * of vma_maps is returned.  */
 struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu,
-					     unsigned long spu_elf_start)
+					     unsigned long __spu_elf_start)
 {
 	static const unsigned char expected[EI_PAD] = {
 		[EI_MAG0] = ELFMAG0,
@@ -107,9 +107,11 @@ struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu,
 
 	int grd_val;
 	struct vma_to_fileoffset_map *map = NULL;
+	void __user *spu_elf_start = (void __user *)__spu_elf_start;
 	struct spu_overlay_info ovly;
 	unsigned int overlay_tbl_offset = -1;
-	unsigned long phdr_start, shdr_start;
+	Elf32_Phdr __user *phdr_start;
+	Elf32_Shdr __user *shdr_start;
 	Elf32_Ehdr ehdr;
 	Elf32_Phdr phdr;
 	Elf32_Shdr shdr, shdr_str;
@@ -121,12 +123,12 @@ struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu,
 	unsigned int ovly_buf_table_sym = 0;
 	unsigned int ovly_table_end_sym = 0;
 	unsigned int ovly_buf_table_end_sym = 0;
-	unsigned long ovly_table;
+	struct spu_overlay_info __user *ovly_table;
 	unsigned int n_ovlys;
 
 	/* Get and validate ELF header.	 */
 
-	if (copy_from_user(&ehdr, (void *) spu_elf_start, sizeof (ehdr)))
+	if (copy_from_user(&ehdr, spu_elf_start, sizeof (ehdr)))
 		goto fail;
 
 	if (memcmp(ehdr.e_ident, expected, EI_PAD) != 0) {
@@ -152,9 +154,7 @@ struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu,
 
 	/* Traverse program headers.  */
 	for (i = 0; i < ehdr.e_phnum; i++) {
-		if (copy_from_user(&phdr,
-				   (void *) (phdr_start + i * sizeof(phdr)),
-				   sizeof(phdr)))
+		if (copy_from_user(&phdr, phdr_start + i, sizeof(phdr)))
 			goto fail;
 
 		if (phdr.p_type != PT_LOAD)
@@ -171,9 +171,7 @@ struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu,
 	pr_debug("SPU_PROF: Created non-overlay maps\n");
 	/* Traverse section table and search for overlay-related symbols.  */
 	for (i = 0; i < ehdr.e_shnum; i++) {
-		if (copy_from_user(&shdr,
-				   (void *) (shdr_start + i * sizeof(shdr)),
-				   sizeof(shdr)))
+		if (copy_from_user(&shdr, shdr_start + i, sizeof(shdr)))
 			goto fail;
 
 		if (shdr.sh_type != SHT_SYMTAB)
@@ -182,8 +180,7 @@ struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu,
 			continue;
 
 		if (copy_from_user(&shdr_str,
-				   (void *) (shdr_start + shdr.sh_link *
-					     sizeof(shdr)),
+				   shdr_start + shdr.sh_link,
 				   sizeof(shdr)))
 			goto fail;
 
@@ -191,15 +188,15 @@ struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu,
 			goto fail;;
 
 		for (j = 0; j < shdr.sh_size / sizeof (sym); j++) {
-			if (copy_from_user(&sym, (void *) (spu_elf_start +
-						       shdr.sh_offset + j *
-							   sizeof (sym)),
+			if (copy_from_user(&sym, spu_elf_start +
+						 shdr.sh_offset +
+						 j * sizeof (sym),
 					   sizeof (sym)))
 				goto fail;
 
-			if (copy_from_user(name, (void *)
-					   (spu_elf_start + shdr_str.sh_offset +
-					    sym.st_name),
+			if (copy_from_user(name, 
+					   spu_elf_start + shdr_str.sh_offset +
+					   sym.st_name,
 					   20))
 				goto fail;
 
@@ -245,9 +242,7 @@ struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu,
 
 	/* Traverse overlay table.  */
 	for (i = 0; i < n_ovlys; i++) {
-		if (copy_from_user(&ovly, (void *)
-				   (ovly_table + i * sizeof (ovly)),
-				   sizeof (ovly)))
+		if (copy_from_user(&ovly, ovly_table + i, sizeof (ovly)))
 			goto fail;
 
 		/* The ovly.vma/size/offset arguments are analogous to the same
diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c
index ca52b58..a977f20 100644
--- a/arch/powerpc/platforms/pseries/xics.c
+++ b/arch/powerpc/platforms/pseries/xics.c
@@ -763,7 +763,7 @@ void xics_request_IPIs(void)
 }
 #endif /* CONFIG_SMP */
 
-void xics_teardown_cpu()
+void xics_teardown_cpu(void)
 {
 	int cpu = smp_processor_id();
 
diff --git a/arch/powerpc/sysdev/cpm2.c b/arch/powerpc/sysdev/cpm2.c
index 7be7112..dd066bb 100644
--- a/arch/powerpc/sysdev/cpm2.c
+++ b/arch/powerpc/sysdev/cpm2.c
@@ -240,6 +240,7 @@ int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode)
 	case CPM_CLK_SCC1:
 		reg = &im_cpmux->cmx_scr;
 		shift = 24;
+		break;
 	case CPM_CLK_SCC2:
 		reg = &im_cpmux->cmx_scr;
 		shift = 16;
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 1272048..8d2cd1d 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -72,9 +72,6 @@ config SYS_SUPPORTS_NUMA
 config SYS_SUPPORTS_PCI
 	bool
 
-config ARCH_MAY_HAVE_PC_FDC
-	bool
-
 config STACKTRACE_SUPPORT
 	def_bool y
 
diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile
index 3dda24d..89b4086 100644
--- a/arch/sh/boot/Makefile
+++ b/arch/sh/boot/Makefile
@@ -44,7 +44,7 @@ KERNEL_ENTRY	:= $(shell /bin/bash -c 'printf "0x%08x" \
 
 quiet_cmd_uimage = UIMAGE  $@
       cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A sh -O linux -T kernel \
-		   -C none -a $(KERNEL_LOAD) -e $(KERNEL_ENTRY) \
+		   -C gzip -a $(KERNEL_LOAD) -e $(KERNEL_ENTRY) \
 		   -n 'Linux-$(KERNELRELEASE)' -d $< $@
 
 $(obj)/uImage: $(obj)/vmlinux.bin.gz FORCE
diff --git a/arch/sh/kernel/cpu/sh2a/fpu.c b/arch/sh/kernel/cpu/sh2a/fpu.c
index ff99562..5627c0b 100644
--- a/arch/sh/kernel/cpu/sh2a/fpu.c
+++ b/arch/sh/kernel/cpu/sh2a/fpu.c
@@ -13,6 +13,7 @@
 #include <linux/signal.h>
 #include <asm/processor.h>
 #include <asm/io.h>
+#include <asm/fpu.h>
 
 /* The PR (precision) bit in the FP Status Register must be clear when
  * an frchg instruction is executed, otherwise the instruction is undefined.
diff --git a/arch/sh/kernel/cpu/sh4/fpu.c b/arch/sh/kernel/cpu/sh4/fpu.c
index 817f993..8020796 100644
--- a/arch/sh/kernel/cpu/sh4/fpu.c
+++ b/arch/sh/kernel/cpu/sh4/fpu.c
@@ -16,6 +16,7 @@
 #include <asm/cpu/fpu.h>
 #include <asm/processor.h>
 #include <asm/system.h>
+#include <asm/fpu.h>
 
 /* The PR (precision) bit in the FP Status Register must be clear when
  * an frchg instruction is executed, otherwise the instruction is undefined.
diff --git a/arch/sh/kernel/cpu/sh5/fpu.c b/arch/sh/kernel/cpu/sh5/fpu.c
index 30b76a9..dd4f51f 100644
--- a/arch/sh/kernel/cpu/sh5/fpu.c
+++ b/arch/sh/kernel/cpu/sh5/fpu.c
@@ -17,6 +17,7 @@
 #include <asm/processor.h>
 #include <asm/user.h>
 #include <asm/io.h>
+#include <asm/fpu.h>
 
 /*
  * Initially load the FPU with signalling NANS.  This bit pattern
diff --git a/arch/sh/kernel/dump_task.c b/arch/sh/kernel/dump_task.c
index 4a8a408..1db7ce0 100644
--- a/arch/sh/kernel/dump_task.c
+++ b/arch/sh/kernel/dump_task.c
@@ -1,5 +1,6 @@
 #include <linux/elfcore.h>
 #include <linux/sched.h>
+#include <asm/fpu.h>
 
 /*
  * Capture the user space registers if the task is not running (in user space)
diff --git a/arch/sh/kernel/process_32.c b/arch/sh/kernel/process_32.c
index 9ab1926..b98e37a 100644
--- a/arch/sh/kernel/process_32.c
+++ b/arch/sh/kernel/process_32.c
@@ -25,6 +25,7 @@
 #include <asm/pgalloc.h>
 #include <asm/system.h>
 #include <asm/ubc.h>
+#include <asm/fpu.h>
 
 static int hlt_counter;
 int ubc_usercnt = 0;
diff --git a/arch/sh/kernel/signal_32.c b/arch/sh/kernel/signal_32.c
index f6b5fbf..f311551 100644
--- a/arch/sh/kernel/signal_32.c
+++ b/arch/sh/kernel/signal_32.c
@@ -29,6 +29,7 @@
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
 #include <asm/cacheflush.h>
+#include <asm/fpu.h>
 
 #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
 
diff --git a/arch/sparc/kernel/ptrace.c b/arch/sparc/kernel/ptrace.c
index 5b54f11..7f44ae6 100644
--- a/arch/sparc/kernel/ptrace.c
+++ b/arch/sparc/kernel/ptrace.c
@@ -325,7 +325,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	const struct user_regset_view *view;
 	int ret;
 
-	view = task_user_regset_view(child);
+	view = task_user_regset_view(current);
 
 	switch(request) {
 	case PTRACE_GETREGS: {
diff --git a/arch/sparc64/defconfig b/arch/sparc64/defconfig
index 250958d..9d4bd22 100644
--- a/arch/sparc64/defconfig
+++ b/arch/sparc64/defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc1
-# Sun Feb 17 22:44:12 2008
+# Linux kernel version: 2.6.25-rc3
+# Wed Mar 26 04:33:35 2008
 #
 CONFIG_SPARC=y
 CONFIG_SPARC64=y
@@ -55,9 +55,11 @@ CONFIG_POSIX_MQUEUE=y
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=18
 # CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_RELAY=y
 CONFIG_NAMESPACES=y
@@ -482,6 +484,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -810,6 +813,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
diff --git a/arch/sparc64/kernel/cpu.c b/arch/sparc64/kernel/cpu.c
index dd5d28e..0097c08 100644
--- a/arch/sparc64/kernel/cpu.c
+++ b/arch/sparc64/kernel/cpu.c
@@ -15,6 +15,8 @@
 #include <asm/spitfire.h>
 #include <asm/oplib.h>
 
+#include "entry.h"
+
 DEFINE_PER_CPU(cpuinfo_sparc, __cpu_data) = { 0 };
 
 struct cpu_iu_info {
@@ -65,8 +67,6 @@ static struct cpu_iu_info linux_sparc_chips[] = {
 char *sparc_cpu_type;
 char *sparc_fpu_type;
 
-unsigned int fsr_storage;
-
 static void __init sun4v_cpu_probe(void)
 {
 	switch (sun4v_chip_type) {
@@ -94,8 +94,10 @@ void __init cpu_probe(void)
 	unsigned long ver, fpu_vers, manuf, impl, fprs;
 	int i;
 	
-	if (tlb_type == hypervisor)
-		return sun4v_cpu_probe();
+	if (tlb_type == hypervisor) {
+		sun4v_cpu_probe();
+		return;
+	}
 
 	fprs = fprs_read();
 	fprs_write(FPRS_FEF);
diff --git a/arch/sparc64/kernel/entry.S b/arch/sparc64/kernel/entry.S
index 6be4d2d..49eca4b 100644
--- a/arch/sparc64/kernel/entry.S
+++ b/arch/sparc64/kernel/entry.S
@@ -1705,6 +1705,36 @@ __flushw_user:
 2:	retl
 	 nop
 
+	/* Flush %fp and %i7 to the stack for all register
+	 * windows active inside of the cpu.  This allows
+	 * show_stack_trace() to avoid using an expensive
+	 * 'flushw'.
+	 */
+	.globl		stack_trace_flush
+	.type		stack_trace_flush,#function
+stack_trace_flush:
+	rdpr		%pstate, %o0
+	wrpr		%o0, PSTATE_IE, %pstate
+
+	rdpr		%cwp, %g1
+	rdpr		%canrestore, %g2
+	sub		%g1, 1, %g3
+
+1:	brz,pn		%g2, 2f
+	 sub		%g2, 1, %g2
+	wrpr		%g3, %cwp
+	stx		%fp, [%sp + STACK_BIAS + RW_V9_I6]
+	stx		%i7, [%sp + STACK_BIAS + RW_V9_I7]
+	ba,pt		%xcc, 1b
+	 sub		%g3, 1, %g3
+
+2:	wrpr		%g1, %cwp
+	wrpr		%o0, %pstate
+
+	retl
+	 nop
+	.size		stack_trace_flush,.-stack_trace_flush
+
 #ifdef CONFIG_SMP
 	.globl		hard_smp_processor_id
 hard_smp_processor_id:
diff --git a/arch/sparc64/kernel/entry.h b/arch/sparc64/kernel/entry.h
new file mode 100644
index 0000000..4a91e9c
--- /dev/null
+++ b/arch/sparc64/kernel/entry.h
@@ -0,0 +1,196 @@
+#ifndef _ENTRY_H
+#define _ENTRY_H
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+
+extern char *sparc_cpu_type;
+extern char *sparc_fpu_type;
+
+extern void __init per_cpu_patch(void);
+extern void __init sun4v_patch(void);
+extern void __init boot_cpu_id_too_large(int cpu);
+extern unsigned int dcache_parity_tl1_occurred;
+extern unsigned int icache_parity_tl1_occurred;
+
+extern asmlinkage void update_perfctrs(void);
+extern asmlinkage void sparc_breakpoint(struct pt_regs *regs);
+extern void timer_interrupt(int irq, struct pt_regs *regs);
+
+extern void do_notify_resume(struct pt_regs *regs,
+			     unsigned long orig_i0,
+			     int restart_syscall,
+			     unsigned long thread_info_flags);
+
+extern asmlinkage void syscall_trace(struct pt_regs *regs,
+				     int syscall_exit_p);
+
+extern void bad_trap_tl1(struct pt_regs *regs, long lvl);
+
+extern void do_fpe_common(struct pt_regs *regs);
+extern void do_fpieee(struct pt_regs *regs);
+extern void do_fpother(struct pt_regs *regs);
+extern void do_tof(struct pt_regs *regs);
+extern void do_div0(struct pt_regs *regs);
+extern void do_illegal_instruction(struct pt_regs *regs);
+extern void mem_address_unaligned(struct pt_regs *regs,
+				  unsigned long sfar,
+				  unsigned long sfsr);
+extern void sun4v_do_mna(struct pt_regs *regs,
+			 unsigned long addr,
+			 unsigned long type_ctx);
+extern void do_privop(struct pt_regs *regs);
+extern void do_privact(struct pt_regs *regs);
+extern void do_cee(struct pt_regs *regs);
+extern void do_cee_tl1(struct pt_regs *regs);
+extern void do_dae_tl1(struct pt_regs *regs);
+extern void do_iae_tl1(struct pt_regs *regs);
+extern void do_div0_tl1(struct pt_regs *regs);
+extern void do_fpdis_tl1(struct pt_regs *regs);
+extern void do_fpieee_tl1(struct pt_regs *regs);
+extern void do_fpother_tl1(struct pt_regs *regs);
+extern void do_ill_tl1(struct pt_regs *regs);
+extern void do_irq_tl1(struct pt_regs *regs);
+extern void do_lddfmna_tl1(struct pt_regs *regs);
+extern void do_stdfmna_tl1(struct pt_regs *regs);
+extern void do_paw(struct pt_regs *regs);
+extern void do_paw_tl1(struct pt_regs *regs);
+extern void do_vaw(struct pt_regs *regs);
+extern void do_vaw_tl1(struct pt_regs *regs);
+extern void do_tof_tl1(struct pt_regs *regs);
+extern void do_getpsr(struct pt_regs *regs);
+
+extern void spitfire_insn_access_exception(struct pt_regs *regs,
+					   unsigned long sfsr,
+					   unsigned long sfar);
+extern void spitfire_insn_access_exception_tl1(struct pt_regs *regs,
+					       unsigned long sfsr,
+					       unsigned long sfar);
+extern void spitfire_data_access_exception(struct pt_regs *regs,
+					   unsigned long sfsr,
+					   unsigned long sfar);
+extern void spitfire_data_access_exception_tl1(struct pt_regs *regs,
+					       unsigned long sfsr,
+					       unsigned long sfar);
+extern void spitfire_access_error(struct pt_regs *regs,
+				  unsigned long status_encoded,
+				  unsigned long afar);
+
+extern void cheetah_fecc_handler(struct pt_regs *regs,
+				 unsigned long afsr,
+				 unsigned long afar);
+extern void cheetah_cee_handler(struct pt_regs *regs,
+				unsigned long afsr,
+				unsigned long afar);
+extern void cheetah_deferred_handler(struct pt_regs *regs,
+				     unsigned long afsr,
+				     unsigned long afar);
+extern void cheetah_plus_parity_error(int type, struct pt_regs *regs);
+
+extern void sun4v_insn_access_exception(struct pt_regs *regs,
+					unsigned long addr,
+					unsigned long type_ctx);
+extern void sun4v_insn_access_exception_tl1(struct pt_regs *regs,
+					    unsigned long addr,
+					    unsigned long type_ctx);
+extern void sun4v_data_access_exception(struct pt_regs *regs,
+					unsigned long addr,
+					unsigned long type_ctx);
+extern void sun4v_data_access_exception_tl1(struct pt_regs *regs,
+					    unsigned long addr,
+					    unsigned long type_ctx);
+extern void sun4v_resum_error(struct pt_regs *regs,
+			      unsigned long offset);
+extern void sun4v_resum_overflow(struct pt_regs *regs);
+extern void sun4v_nonresum_error(struct pt_regs *regs,
+				 unsigned long offset);
+extern void sun4v_nonresum_overflow(struct pt_regs *regs);
+
+extern unsigned long sun4v_err_itlb_vaddr;
+extern unsigned long sun4v_err_itlb_ctx;
+extern unsigned long sun4v_err_itlb_pte;
+extern unsigned long sun4v_err_itlb_error;
+
+extern void sun4v_itlb_error_report(struct pt_regs *regs, int tl);
+
+extern unsigned long sun4v_err_dtlb_vaddr;
+extern unsigned long sun4v_err_dtlb_ctx;
+extern unsigned long sun4v_err_dtlb_pte;
+extern unsigned long sun4v_err_dtlb_error;
+
+extern void sun4v_dtlb_error_report(struct pt_regs *regs, int tl);
+extern void hypervisor_tlbop_error(unsigned long err,
+				   unsigned long op);
+extern void hypervisor_tlbop_error_xcall(unsigned long err,
+					 unsigned long op);
+
+/* WARNING: The error trap handlers in assembly know the precise
+ *	    layout of the following structure.
+ *
+ * C-level handlers in traps.c use this information to log the
+ * error and then determine how to recover (if possible).
+ */
+struct cheetah_err_info {
+/*0x00*/u64 afsr;
+/*0x08*/u64 afar;
+
+	/* D-cache state */
+/*0x10*/u64 dcache_data[4];	/* The actual data	*/
+/*0x30*/u64 dcache_index;	/* D-cache index	*/
+/*0x38*/u64 dcache_tag;		/* D-cache tag/valid	*/
+/*0x40*/u64 dcache_utag;	/* D-cache microtag	*/
+/*0x48*/u64 dcache_stag;	/* D-cache snooptag	*/
+
+	/* I-cache state */
+/*0x50*/u64 icache_data[8];	/* The actual insns + predecode	*/
+/*0x90*/u64 icache_index;	/* I-cache index	*/
+/*0x98*/u64 icache_tag;		/* I-cache phys tag	*/
+/*0xa0*/u64 icache_utag;	/* I-cache microtag	*/
+/*0xa8*/u64 icache_stag;	/* I-cache snooptag	*/
+/*0xb0*/u64 icache_upper;	/* I-cache upper-tag	*/
+/*0xb8*/u64 icache_lower;	/* I-cache lower-tag	*/
+
+	/* E-cache state */
+/*0xc0*/u64 ecache_data[4];	/* 32 bytes from staging registers */
+/*0xe0*/u64 ecache_index;	/* E-cache index	*/
+/*0xe8*/u64 ecache_tag;		/* E-cache tag/state	*/
+
+/*0xf0*/u64 __pad[32 - 30];
+};
+#define CHAFSR_INVALID		((u64)-1L)
+
+/* This is allocated at boot time based upon the largest hardware
+ * cpu ID in the system.  We allocate two entries per cpu, one for
+ * TL==0 logging and one for TL >= 1 logging.
+ */
+extern struct cheetah_err_info *cheetah_error_log;
+
+/* UPA nodes send interrupt packet to UltraSparc with first data reg
+ * value low 5 (7 on Starfire) bits holding the IRQ identifier being
+ * delivered.  We must translate this into a non-vector IRQ so we can
+ * set the softint on this cpu.
+ *
+ * To make processing these packets efficient and race free we use
+ * an array of irq buckets below.  The interrupt vector handler in
+ * entry.S feeds incoming packets into per-cpu pil-indexed lists.
+ *
+ * If you make changes to ino_bucket, please update hand coded assembler
+ * of the vectored interrupt trap handler(s) in entry.S and sun4v_ivec.S
+ */
+struct ino_bucket {
+/*0x00*/unsigned long __irq_chain_pa;
+
+	/* Virtual interrupt number assigned to this INO.  */
+/*0x08*/unsigned int __virt_irq;
+/*0x0c*/unsigned int __pad;
+};
+
+extern struct ino_bucket *ivector_table;
+extern unsigned long ivector_table_pa;
+
+extern void handler_irq(int irq, struct pt_regs *regs);
+extern void init_irqwork_curcpu(void);
+extern void __cpuinit sun4v_register_mondo_queues(int this_cpu);
+
+#endif /* _ENTRY_H */
diff --git a/arch/sparc64/kernel/iommu.c b/arch/sparc64/kernel/iommu.c
index fbaab34..756fa24 100644
--- a/arch/sparc64/kernel/iommu.c
+++ b/arch/sparc64/kernel/iommu.c
@@ -516,9 +516,11 @@ static int dma_4u_map_sg(struct device *dev, struct scatterlist *sglist,
 	unsigned long flags, handle, prot, ctx;
 	dma_addr_t dma_next = 0, dma_addr;
 	unsigned int max_seg_size;
+	unsigned long seg_boundary_size;
 	int outcount, incount, i;
 	struct strbuf *strbuf;
 	struct iommu *iommu;
+	unsigned long base_shift;
 
 	BUG_ON(direction == DMA_NONE);
 
@@ -549,8 +551,11 @@ static int dma_4u_map_sg(struct device *dev, struct scatterlist *sglist,
 	outs->dma_length = 0;
 
 	max_seg_size = dma_get_max_seg_size(dev);
+	seg_boundary_size = ALIGN(dma_get_seg_boundary(dev) + 1,
+				  IO_PAGE_SIZE) >> IO_PAGE_SHIFT;
+	base_shift = iommu->page_table_map_base >> IO_PAGE_SHIFT;
 	for_each_sg(sglist, s, nelems, i) {
-		unsigned long paddr, npages, entry, slen;
+		unsigned long paddr, npages, entry, out_entry = 0, slen;
 		iopte_t *base;
 
 		slen = s->length;
@@ -593,7 +598,9 @@ static int dma_4u_map_sg(struct device *dev, struct scatterlist *sglist,
 			 * - allocated dma_addr isn't contiguous to previous allocation
 			 */
 			if ((dma_addr != dma_next) ||
-			    (outs->dma_length + s->length > max_seg_size)) {
+			    (outs->dma_length + s->length > max_seg_size) ||
+			    (is_span_boundary(out_entry, base_shift,
+					      seg_boundary_size, outs, s))) {
 				/* Can't merge: create a new segment */
 				segstart = s;
 				outcount++;
@@ -607,6 +614,7 @@ static int dma_4u_map_sg(struct device *dev, struct scatterlist *sglist,
 			/* This is a new segment, fill entries */
 			outs->dma_address = dma_addr;
 			outs->dma_length = slen;
+			out_entry = entry;
 		}
 
 		/* Calculate next page pointer for contiguous check */
@@ -626,7 +634,7 @@ static int dma_4u_map_sg(struct device *dev, struct scatterlist *sglist,
 iommu_map_failed:
 	for_each_sg(sglist, s, nelems, i) {
 		if (s->dma_length != 0) {
-			unsigned long vaddr, npages, entry, i;
+			unsigned long vaddr, npages, entry, j;
 			iopte_t *base;
 
 			vaddr = s->dma_address & IO_PAGE_MASK;
@@ -637,8 +645,8 @@ iommu_map_failed:
 				>> IO_PAGE_SHIFT;
 			base = iommu->page_table + entry;
 
-			for (i = 0; i < npages; i++)
-				iopte_make_dummy(iommu, base + i);
+			for (j = 0; j < npages; j++)
+				iopte_make_dummy(iommu, base + j);
 
 			s->dma_address = DMA_ERROR_CODE;
 			s->dma_length = 0;
@@ -803,7 +811,7 @@ static void dma_4u_sync_sg_for_cpu(struct device *dev,
 	spin_unlock_irqrestore(&iommu->lock, flags);
 }
 
-const struct dma_ops sun4u_dma_ops = {
+static const struct dma_ops sun4u_dma_ops = {
 	.alloc_coherent		= dma_4u_alloc_coherent,
 	.free_coherent		= dma_4u_free_coherent,
 	.map_single		= dma_4u_map_single,
diff --git a/arch/sparc64/kernel/iommu_common.h b/arch/sparc64/kernel/iommu_common.h
index 0713bd5..f3575a6 100644
--- a/arch/sparc64/kernel/iommu_common.h
+++ b/arch/sparc64/kernel/iommu_common.h
@@ -12,6 +12,7 @@
 #include <linux/mm.h>
 #include <linux/scatterlist.h>
 #include <linux/device.h>
+#include <linux/iommu-helper.h>
 
 #include <asm/iommu.h>
 #include <asm/scatterlist.h>
@@ -45,17 +46,16 @@ static inline unsigned long iommu_num_pages(unsigned long vaddr,
 	return npages;
 }
 
-static inline unsigned long calc_npages(struct scatterlist *sglist, int nelems)
+static inline int is_span_boundary(unsigned long entry,
+				   unsigned long shift,
+				   unsigned long boundary_size,
+				   struct scatterlist *outs,
+				   struct scatterlist *sg)
 {
-	unsigned long i, npages = 0;
-	struct scatterlist *sg;
+	unsigned long paddr = SG_ENT_PHYS_ADDRESS(outs);
+	int nr = iommu_num_pages(paddr, outs->dma_length + sg->length);
 
-	for_each_sg(sglist, sg, nelems, i) {
-		unsigned long paddr = SG_ENT_PHYS_ADDRESS(sg);
-		npages += iommu_num_pages(paddr, sg->length);
-	}
-
-	return npages;
+	return iommu_is_span_boundary(entry, nr, shift, boundary_size);
 }
 
 extern unsigned long iommu_range_alloc(struct device *dev,
diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c
index 5ec06c8..eb88bd6 100644
--- a/arch/sparc64/kernel/irq.c
+++ b/arch/sparc64/kernel/irq.c
@@ -44,27 +44,10 @@
 #include <asm/hypervisor.h>
 #include <asm/cacheflush.h>
 
-/* UPA nodes send interrupt packet to UltraSparc with first data reg
- * value low 5 (7 on Starfire) bits holding the IRQ identifier being
- * delivered.  We must translate this into a non-vector IRQ so we can
- * set the softint on this cpu.
- *
- * To make processing these packets efficient and race free we use
- * an array of irq buckets below.  The interrupt vector handler in
- * entry.S feeds incoming packets into per-cpu pil-indexed lists.
- *
- * If you make changes to ino_bucket, please update hand coded assembler
- * of the vectored interrupt trap handler(s) in entry.S and sun4v_ivec.S
- */
-struct ino_bucket {
-/*0x00*/unsigned long __irq_chain_pa;
-
-	/* Virtual interrupt number assigned to this INO.  */
-/*0x08*/unsigned int __virt_irq;
-/*0x0c*/unsigned int __pad;
-};
+#include "entry.h"
 
 #define NUM_IVECS	(IMAP_INR + 1)
+
 struct ino_bucket *ivector_table;
 unsigned long ivector_table_pa;
 
diff --git a/arch/sparc64/kernel/pci_sun4v.c b/arch/sparc64/kernel/pci_sun4v.c
index ddca6c6..0183970 100644
--- a/arch/sparc64/kernel/pci_sun4v.c
+++ b/arch/sparc64/kernel/pci_sun4v.c
@@ -335,8 +335,10 @@ static int dma_4v_map_sg(struct device *dev, struct scatterlist *sglist,
 	unsigned long flags, handle, prot;
 	dma_addr_t dma_next = 0, dma_addr;
 	unsigned int max_seg_size;
+	unsigned long seg_boundary_size;
 	int outcount, incount, i;
 	struct iommu *iommu;
+	unsigned long base_shift;
 	long err;
 
 	BUG_ON(direction == DMA_NONE);
@@ -362,8 +364,11 @@ static int dma_4v_map_sg(struct device *dev, struct scatterlist *sglist,
 	iommu_batch_start(dev, prot, ~0UL);
 
 	max_seg_size = dma_get_max_seg_size(dev);
+	seg_boundary_size = ALIGN(dma_get_seg_boundary(dev) + 1,
+				  IO_PAGE_SIZE) >> IO_PAGE_SHIFT;
+	base_shift = iommu->page_table_map_base >> IO_PAGE_SHIFT;
 	for_each_sg(sglist, s, nelems, i) {
-		unsigned long paddr, npages, entry, slen;
+		unsigned long paddr, npages, entry, out_entry = 0, slen;
 
 		slen = s->length;
 		/* Sanity check */
@@ -406,7 +411,9 @@ static int dma_4v_map_sg(struct device *dev, struct scatterlist *sglist,
 			 * - allocated dma_addr isn't contiguous to previous allocation
 			 */
 			if ((dma_addr != dma_next) ||
-			    (outs->dma_length + s->length > max_seg_size)) {
+			    (outs->dma_length + s->length > max_seg_size) ||
+			    (is_span_boundary(out_entry, base_shift,
+					      seg_boundary_size, outs, s))) {
 				/* Can't merge: create a new segment */
 				segstart = s;
 				outcount++;
@@ -420,6 +427,7 @@ static int dma_4v_map_sg(struct device *dev, struct scatterlist *sglist,
 			/* This is a new segment, fill entries */
 			outs->dma_address = dma_addr;
 			outs->dma_length = slen;
+			out_entry = entry;
 		}
 
 		/* Calculate next page pointer for contiguous check */
diff --git a/arch/sparc64/kernel/ptrace.c b/arch/sparc64/kernel/ptrace.c
index 9a1ba1f..e9fc0aa 100644
--- a/arch/sparc64/kernel/ptrace.c
+++ b/arch/sparc64/kernel/ptrace.c
@@ -35,6 +35,9 @@
 #include <asm/spitfire.h>
 #include <asm/page.h>
 #include <asm/cpudata.h>
+#include <asm/cacheflush.h>
+
+#include "entry.h"
 
 /* #define ALLOW_INIT_TRACING */
 
@@ -67,6 +70,8 @@ void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
 	if (tlb_type == hypervisor)
 		return;
 
+	preempt_disable();
+
 #ifdef DCACHE_ALIASING_POSSIBLE
 	/* If bit 13 of the kernel address we used to access the
 	 * user page is the same as the virtual address that page
@@ -105,6 +110,87 @@ void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
 		for (; start < end; start += icache_line_size)
 			flushi(start);
 	}
+
+	preempt_enable();
+}
+
+static int get_from_target(struct task_struct *target, unsigned long uaddr,
+			   void *kbuf, int len)
+{
+	if (target == current) {
+		if (copy_from_user(kbuf, (void __user *) uaddr, len))
+			return -EFAULT;
+	} else {
+		int len2 = access_process_vm(target, uaddr, kbuf, len, 0);
+		if (len2 != len)
+			return -EFAULT;
+	}
+	return 0;
+}
+
+static int set_to_target(struct task_struct *target, unsigned long uaddr,
+			 void *kbuf, int len)
+{
+	if (target == current) {
+		if (copy_to_user((void __user *) uaddr, kbuf, len))
+			return -EFAULT;
+	} else {
+		int len2 = access_process_vm(target, uaddr, kbuf, len, 1);
+		if (len2 != len)
+			return -EFAULT;
+	}
+	return 0;
+}
+
+static int regwindow64_get(struct task_struct *target,
+			   const struct pt_regs *regs,
+			   struct reg_window *wbuf)
+{
+	unsigned long rw_addr = regs->u_regs[UREG_I6];
+
+	if (test_tsk_thread_flag(current, TIF_32BIT)) {
+		struct reg_window32 win32;
+		int i;
+
+		if (get_from_target(target, rw_addr, &win32, sizeof(win32)))
+			return -EFAULT;
+		for (i = 0; i < 8; i++)
+			wbuf->locals[i] = win32.locals[i];
+		for (i = 0; i < 8; i++)
+			wbuf->ins[i] = win32.ins[i];
+	} else {
+		rw_addr += STACK_BIAS;
+		if (get_from_target(target, rw_addr, wbuf, sizeof(*wbuf)))
+			return -EFAULT;
+	}
+
+	return 0;
+}
+
+static int regwindow64_set(struct task_struct *target,
+			   const struct pt_regs *regs,
+			   struct reg_window *wbuf)
+{
+	unsigned long rw_addr = regs->u_regs[UREG_I6];
+
+	if (test_tsk_thread_flag(current, TIF_32BIT)) {
+		struct reg_window32 win32;
+		int i;
+
+		for (i = 0; i < 8; i++)
+			win32.locals[i] = wbuf->locals[i];
+		for (i = 0; i < 8; i++)
+			win32.ins[i] = wbuf->ins[i];
+
+		if (set_to_target(target, rw_addr, &win32, sizeof(win32)))
+			return -EFAULT;
+	} else {
+		rw_addr += STACK_BIAS;
+		if (set_to_target(target, rw_addr, wbuf, sizeof(*wbuf)))
+			return -EFAULT;
+	}
+
+	return 0;
 }
 
 enum sparc_regset {
@@ -126,16 +212,13 @@ static int genregs64_get(struct task_struct *target,
 	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
 				  regs->u_regs,
 				  0, 16 * sizeof(u64));
-	if (!ret) {
-		unsigned long __user *reg_window = (unsigned long __user *)
-			(regs->u_regs[UREG_I6] + STACK_BIAS);
-		unsigned long window[16];
+	if (!ret && count && pos < (32 * sizeof(u64))) {
+		struct reg_window window;
 
-		if (copy_from_user(window, reg_window, sizeof(window)))
+		if (regwindow64_get(target, regs, &window))
 			return -EFAULT;
-
 		ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
-					  window,
+					  &window,
 					  16 * sizeof(u64),
 					  32 * sizeof(u64));
 	}
@@ -157,10 +240,11 @@ static int genregs64_get(struct task_struct *target,
 					  36 * sizeof(u64));
 	}
 
-	if (!ret)
+	if (!ret) {
 		ret = user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
 					       36 * sizeof(u64), -1);
 
+	}
 	return ret;
 }
 
@@ -178,20 +262,19 @@ static int genregs64_set(struct task_struct *target,
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
 				 regs->u_regs,
 				 0, 16 * sizeof(u64));
-	if (!ret && count > 0) {
-		unsigned long __user *reg_window = (unsigned long __user *)
-			(regs->u_regs[UREG_I6] + STACK_BIAS);
-		unsigned long window[16];
+	if (!ret && count && pos < (32 * sizeof(u64))) {
+		struct reg_window window;
 
-		if (copy_from_user(window, reg_window, sizeof(window)))
+		if (regwindow64_get(target, regs, &window))
 			return -EFAULT;
 
 		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-					 window,
+					 &window,
 					 16 * sizeof(u64),
 					 32 * sizeof(u64));
+
 		if (!ret &&
-		    copy_to_user(reg_window, window, sizeof(window)))
+		    regwindow64_set(target, regs, &window))
 			return -EFAULT;
 	}
 
@@ -382,6 +465,7 @@ static const struct user_regset_view user_sparc64_view = {
 	.regsets = sparc64_regsets, .n = ARRAY_SIZE(sparc64_regsets)
 };
 
+#ifdef CONFIG_COMPAT
 static int genregs32_get(struct task_struct *target,
 			 const struct user_regset *regset,
 			 unsigned int pos, unsigned int count,
@@ -404,9 +488,22 @@ static int genregs32_get(struct task_struct *target,
 			*k++ = regs->u_regs[pos++];
 
 		reg_window = (compat_ulong_t __user *) regs->u_regs[UREG_I6];
-		for (; count > 0 && pos < 32; count--) {
-			if (get_user(*k++, &reg_window[pos++]))
-				return -EFAULT;
+		if (target == current) {
+			for (; count > 0 && pos < 32; count--) {
+				if (get_user(*k++, &reg_window[pos++]))
+					return -EFAULT;
+			}
+		} else {
+			for (; count > 0 && pos < 32; count--) {
+				if (access_process_vm(target,
+						      (unsigned long)
+						      &reg_window[pos],
+						      k, sizeof(*k), 0)
+				    != sizeof(*k))
+					return -EFAULT;
+				k++;
+				pos++;
+			}
 		}
 	} else {
 		for (; count > 0 && pos < 16; count--) {
@@ -415,10 +512,28 @@ static int genregs32_get(struct task_struct *target,
 		}
 
 		reg_window = (compat_ulong_t __user *) regs->u_regs[UREG_I6];
-		for (; count > 0 && pos < 32; count--) {
-			if (get_user(reg, &reg_window[pos++]) ||
-			    put_user(reg, u++))
-				return -EFAULT;
+		if (target == current) {
+			for (; count > 0 && pos < 32; count--) {
+				if (get_user(reg, &reg_window[pos++]) ||
+				    put_user(reg, u++))
+					return -EFAULT;
+			}
+		} else {
+			for (; count > 0 && pos < 32; count--) {
+				if (access_process_vm(target,
+						      (unsigned long)
+						      &reg_window[pos],
+						      &reg, sizeof(reg), 0)
+				    != sizeof(reg))
+					return -EFAULT;
+				if (access_process_vm(target,
+						      (unsigned long) u,
+						      &reg, sizeof(reg), 1)
+				    != sizeof(reg))
+					return -EFAULT;
+				pos++;
+				u++;
+			}
 		}
 	}
 	while (count > 0) {
@@ -480,9 +595,23 @@ static int genregs32_set(struct task_struct *target,
 			regs->u_regs[pos++] = *k++;
 
 		reg_window = (compat_ulong_t __user *) regs->u_regs[UREG_I6];
-		for (; count > 0 && pos < 32; count--) {
-			if (put_user(*k++, &reg_window[pos++]))
-				return -EFAULT;
+		if (target == current) {
+			for (; count > 0 && pos < 32; count--) {
+				if (put_user(*k++, &reg_window[pos++]))
+					return -EFAULT;
+			}
+		} else {
+			for (; count > 0 && pos < 32; count--) {
+				if (access_process_vm(target,
+						      (unsigned long)
+						      &reg_window[pos],
+						      (void *) k,
+						      sizeof(*k), 1)
+				    != sizeof(*k))
+					return -EFAULT;
+				k++;
+				pos++;
+			}
 		}
 	} else {
 		for (; count > 0 && pos < 16; count--) {
@@ -492,10 +621,29 @@ static int genregs32_set(struct task_struct *target,
 		}
 
 		reg_window = (compat_ulong_t __user *) regs->u_regs[UREG_I6];
-		for (; count > 0 && pos < 32; count--) {
-			if (get_user(reg, u++) ||
-			    put_user(reg, &reg_window[pos++]))
-				return -EFAULT;
+		if (target == current) {
+			for (; count > 0 && pos < 32; count--) {
+				if (get_user(reg, u++) ||
+				    put_user(reg, &reg_window[pos++]))
+					return -EFAULT;
+			}
+		} else {
+			for (; count > 0 && pos < 32; count--) {
+				if (access_process_vm(target,
+						      (unsigned long)
+						      u,
+						      &reg, sizeof(reg), 0)
+				    != sizeof(reg))
+					return -EFAULT;
+				if (access_process_vm(target,
+						      (unsigned long)
+						      &reg_window[pos],
+						      &reg, sizeof(reg), 1)
+				    != sizeof(reg))
+					return -EFAULT;
+				pos++;
+				u++;
+			}
 		}
 	}
 	while (count > 0) {
@@ -676,14 +824,18 @@ static const struct user_regset_view user_sparc32_view = {
 	.name = "sparc", .e_machine = EM_SPARC,
 	.regsets = sparc32_regsets, .n = ARRAY_SIZE(sparc32_regsets)
 };
+#endif /* CONFIG_COMPAT */
 
 const struct user_regset_view *task_user_regset_view(struct task_struct *task)
 {
+#ifdef CONFIG_COMPAT
 	if (test_tsk_thread_flag(task, TIF_32BIT))
 		return &user_sparc32_view;
+#endif
 	return &user_sparc64_view;
 }
 
+#ifdef CONFIG_COMPAT
 struct compat_fps {
 	unsigned int regs[32];
 	unsigned int fsr;
@@ -699,7 +851,7 @@ struct compat_fps {
 long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 			compat_ulong_t caddr, compat_ulong_t cdata)
 {
-	const struct user_regset_view *view = task_user_regset_view(child);
+	const struct user_regset_view *view = task_user_regset_view(current);
 	compat_ulong_t caddr2 = task_pt_regs(current)->u_regs[UREG_I4];
 	struct pt_regs32 __user *pregs;
 	struct compat_fps __user *fps;
@@ -798,6 +950,7 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 
 	return ret;
 }
+#endif /* CONFIG_COMPAT */
 
 struct fps {
 	unsigned int regs[64];
@@ -806,12 +959,15 @@ struct fps {
 
 long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 {
-	const struct user_regset_view *view = task_user_regset_view(child);
-	struct pt_regs __user *pregs = (struct pt_regs __user *) addr;
+	const struct user_regset_view *view = task_user_regset_view(current);
 	unsigned long addr2 = task_pt_regs(current)->u_regs[UREG_I4];
-	struct fps __user *fps = (struct fps __user *) addr;
+	struct pt_regs __user *pregs;
+	struct fps __user *fps;
 	int ret;
 
+	pregs = (struct pt_regs __user *) (unsigned long) addr;
+	fps = (struct fps __user *) (unsigned long) addr;
+
 	switch (request) {
 	case PTRACE_PEEKUSR:
 		ret = (addr != 0) ? -EIO : 0;
diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c
index d036dbe..6acb4c5 100644
--- a/arch/sparc64/kernel/setup.c
+++ b/arch/sparc64/kernel/setup.c
@@ -51,6 +51,8 @@
 #include <net/ipconfig.h>
 #endif
 
+#include "entry.h"
+
 /* Used to synchronize accesses to NatSemi SUPER I/O chip configure
  * operations in asm/ns87303.h
  */
@@ -335,9 +337,6 @@ void __init setup_arch(char **cmdline_p)
 
 /* BUFFER is PAGE_SIZE bytes long. */
 
-extern char *sparc_cpu_type;
-extern char *sparc_fpu_type;
-
 extern void smp_info(struct seq_file *);
 extern void smp_bogo(struct seq_file *);
 extern void mmu_info(struct seq_file *);
diff --git a/arch/sparc64/kernel/signal.c b/arch/sparc64/kernel/signal.c
index fb13775..9d51956 100644
--- a/arch/sparc64/kernel/signal.c
+++ b/arch/sparc64/kernel/signal.c
@@ -32,6 +32,9 @@
 #include <asm/siginfo.h>
 #include <asm/visasm.h>
 
+#include "entry.h"
+#include "systbls.h"
+
 #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
 
 /* {set, get}context() needed for 64-bit SparcLinux userland. */
@@ -354,7 +357,7 @@ static int invalid_frame_pointer(void __user *fp, int fplen)
 static inline int
 save_fpu_state(struct pt_regs *regs, __siginfo_fpu_t __user *fpu)
 {
-	unsigned long *fpregs = (unsigned long *)(regs+1);
+	unsigned long *fpregs = current_thread_info()->fpregs;
 	unsigned long fprs;
 	int err = 0;
 	
diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c
index 5a1126b..59f020d 100644
--- a/arch/sparc64/kernel/smp.c
+++ b/arch/sparc64/kernel/smp.c
@@ -1,6 +1,6 @@
 /* smp.c: Sparc64 SMP support.
  *
- * Copyright (C) 1997, 2007 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 1997, 2007, 2008 David S. Miller (davem@davemloft.net)
  */
 
 #include <linux/module.h>
@@ -30,6 +30,7 @@
 #include <asm/cpudata.h>
 #include <asm/hvtramp.h>
 #include <asm/io.h>
+#include <asm/timer.h>
 
 #include <asm/irq.h>
 #include <asm/irq_regs.h>
diff --git a/arch/sparc64/kernel/stacktrace.c b/arch/sparc64/kernel/stacktrace.c
index 47f92a5..84d39e8 100644
--- a/arch/sparc64/kernel/stacktrace.c
+++ b/arch/sparc64/kernel/stacktrace.c
@@ -2,13 +2,15 @@
 #include <linux/stacktrace.h>
 #include <linux/thread_info.h>
 #include <asm/ptrace.h>
+#include <asm/stacktrace.h>
 
 void save_stack_trace(struct stack_trace *trace)
 {
 	unsigned long ksp, fp, thread_base;
 	struct thread_info *tp = task_thread_info(current);
 
-	flushw_all();
+	stack_trace_flush();
+
 	__asm__ __volatile__(
 		"mov	%%fp, %0"
 		: "=r" (ksp)
diff --git a/arch/sparc64/kernel/sys_sparc.c b/arch/sparc64/kernel/sys_sparc.c
index 134d801..f952745 100644
--- a/arch/sparc64/kernel/sys_sparc.c
+++ b/arch/sparc64/kernel/sys_sparc.c
@@ -1,5 +1,4 @@
-/* $Id: sys_sparc.c,v 1.57 2002/02/09 19:49:30 davem Exp $
- * linux/arch/sparc64/kernel/sys_sparc.c
+/* linux/arch/sparc64/kernel/sys_sparc.c
  *
  * This file contains various random system calls that
  * have a non-standard calling sequence on the Linux/sparc
@@ -30,6 +29,9 @@
 #include <asm/perfctr.h>
 #include <asm/unistd.h>
 
+#include "entry.h"
+#include "systbls.h"
+
 /* #define DEBUG_UNIMP_SYSCALL */
 
 asmlinkage unsigned long sys_getpagesize(void)
@@ -445,7 +447,8 @@ asmlinkage long sys_ipc(unsigned int call, int first, unsigned long second,
 			goto out;
 		case SEMTIMEDOP:
 			err = sys_semtimedop(first, ptr, (unsigned)second,
-				(const struct timespec __user *) fifth);
+				(const struct timespec __user *)
+					     (unsigned long) fifth);
 			goto out;
 		case SEMGET:
 			err = sys_semget(first, (int)second, (int)third);
@@ -788,7 +791,7 @@ asmlinkage long sys_utrap_install(utrap_entry_t type,
 	} else {
 		if ((utrap_handler_t)current_thread_info()->utraps[type] != new_p &&
 		    current_thread_info()->utraps[0] > 1) {
-			long *p = current_thread_info()->utraps;
+			unsigned long *p = current_thread_info()->utraps;
 
 			current_thread_info()->utraps =
 				kmalloc((UT_TRAP_INSTRUCTION_31+1)*sizeof(long),
@@ -816,7 +819,8 @@ asmlinkage long sys_utrap_install(utrap_entry_t type,
 	return 0;
 }
 
-long sparc_memory_ordering(unsigned long model, struct pt_regs *regs)
+asmlinkage long sparc_memory_ordering(unsigned long model,
+				      struct pt_regs *regs)
 {
 	if (model >= 3)
 		return -EINVAL;
diff --git a/arch/sparc64/kernel/systbls.h b/arch/sparc64/kernel/systbls.h
new file mode 100644
index 0000000..8a0d20a
--- /dev/null
+++ b/arch/sparc64/kernel/systbls.h
@@ -0,0 +1,53 @@
+#ifndef _SYSTBLS_H
+#define _SYSTBLS_H
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/utsname.h>
+#include <asm/utrap.h>
+#include <asm/signal.h>
+
+extern asmlinkage unsigned long sys_getpagesize(void);
+extern asmlinkage unsigned long sparc_brk(unsigned long brk);
+extern asmlinkage long sparc_pipe(struct pt_regs *regs);
+extern asmlinkage long sys_ipc(unsigned int call, int first,
+			       unsigned long second,
+			       unsigned long third,
+			       void __user *ptr, long fifth);
+extern asmlinkage long sparc64_newuname(struct new_utsname __user *name);
+extern asmlinkage long sparc64_personality(unsigned long personality);
+extern asmlinkage unsigned long sys_mmap(unsigned long addr, unsigned long len,
+					 unsigned long prot, unsigned long flags,
+					 unsigned long fd, unsigned long off);
+extern asmlinkage long sys64_munmap(unsigned long addr, size_t len);
+extern asmlinkage unsigned long sys64_mremap(unsigned long addr,
+					     unsigned long old_len,
+					     unsigned long new_len,
+					     unsigned long flags,
+					     unsigned long new_addr);
+extern asmlinkage unsigned long c_sys_nis_syscall(struct pt_regs *regs);
+extern asmlinkage long sys_getdomainname(char __user *name, int len);
+extern asmlinkage long solaris_syscall(struct pt_regs *regs);
+extern asmlinkage long sunos_syscall(struct pt_regs *regs);
+extern asmlinkage long sys_utrap_install(utrap_entry_t type,
+					 utrap_handler_t new_p,
+					 utrap_handler_t new_d,
+					 utrap_handler_t __user *old_p,
+					 utrap_handler_t __user *old_d);
+extern asmlinkage long sparc_memory_ordering(unsigned long model,
+					     struct pt_regs *regs);
+extern asmlinkage long sys_rt_sigaction(int sig,
+					const struct sigaction __user *act,
+					struct sigaction __user *oact,
+					void __user *restorer,
+					size_t sigsetsize);
+extern asmlinkage long sys_perfctr(int opcode, unsigned long arg0,
+				   unsigned long arg1, unsigned long arg2);
+
+extern asmlinkage void sparc64_set_context(struct pt_regs *regs);
+extern asmlinkage void sparc64_get_context(struct pt_regs *regs);
+extern asmlinkage long sys_sigpause(unsigned int set);
+extern asmlinkage long sys_sigsuspend(old_sigset_t set);
+extern void do_rt_sigreturn(struct pt_regs *regs);
+
+#endif /* _SYSTBLS_H */
diff --git a/arch/sparc64/kernel/time.c b/arch/sparc64/kernel/time.c
index d204f1a..e5d2389 100644
--- a/arch/sparc64/kernel/time.c
+++ b/arch/sparc64/kernel/time.c
@@ -1,7 +1,6 @@
-/* $Id: time.c,v 1.42 2002/01/23 14:33:55 davem Exp $
- * time.c: UltraSparc timer and TOD clock support.
+/* time.c: UltraSparc timer and TOD clock support.
  *
- * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1997, 2008 David S. Miller (davem@davemloft.net)
  * Copyright (C) 1998 Eddie C. Dost   (ecd@skynet.be)
  *
  * Based largely on code which is:
@@ -48,6 +47,8 @@
 #include <asm/uaccess.h>
 #include <asm/irq_regs.h>
 
+#include "entry.h"
+
 DEFINE_SPINLOCK(mostek_lock);
 DEFINE_SPINLOCK(rtc_lock);
 void __iomem *mstk48t02_regs = NULL;
@@ -508,6 +509,37 @@ static int __init has_low_battery(void)
 	return (data1 == data2);	/* Was the write blocked? */
 }
 
+static void __init mostek_set_system_time(void __iomem *mregs)
+{
+	unsigned int year, mon, day, hour, min, sec;
+	u8 tmp;
+
+	spin_lock_irq(&mostek_lock);
+
+	/* Traditional Mostek chip. */
+	tmp = mostek_read(mregs + MOSTEK_CREG);
+	tmp |= MSTK_CREG_READ;
+	mostek_write(mregs + MOSTEK_CREG, tmp);
+
+	sec = MSTK_REG_SEC(mregs);
+	min = MSTK_REG_MIN(mregs);
+	hour = MSTK_REG_HOUR(mregs);
+	day = MSTK_REG_DOM(mregs);
+	mon = MSTK_REG_MONTH(mregs);
+	year = MSTK_CVT_YEAR( MSTK_REG_YEAR(mregs) );
+
+	xtime.tv_sec = mktime(year, mon, day, hour, min, sec);
+	xtime.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ);
+	set_normalized_timespec(&wall_to_monotonic,
+ 	                        -xtime.tv_sec, -xtime.tv_nsec);
+
+	tmp = mostek_read(mregs + MOSTEK_CREG);
+	tmp &= ~MSTK_CREG_READ;
+	mostek_write(mregs + MOSTEK_CREG, tmp);
+
+	spin_unlock_irq(&mostek_lock);
+}
+
 /* Probe for the real time clock chip. */
 static void __init set_system_time(void)
 {
@@ -520,7 +552,6 @@ static void __init set_system_time(void)
 	unsigned long dregs = 0UL;
 	void __iomem *bregs = 0UL;
 #endif
-	u8 tmp;
 
 	if (!mregs && !dregs && !bregs) {
 		prom_printf("Something wrong, clock regs not mapped yet.\n");
@@ -528,20 +559,11 @@ static void __init set_system_time(void)
 	}		
 
 	if (mregs) {
-		spin_lock_irq(&mostek_lock);
-
-		/* Traditional Mostek chip. */
-		tmp = mostek_read(mregs + MOSTEK_CREG);
-		tmp |= MSTK_CREG_READ;
-		mostek_write(mregs + MOSTEK_CREG, tmp);
+		mostek_set_system_time(mregs);
+		return;
+	}
 
-		sec = MSTK_REG_SEC(mregs);
-		min = MSTK_REG_MIN(mregs);
-		hour = MSTK_REG_HOUR(mregs);
-		day = MSTK_REG_DOM(mregs);
-		mon = MSTK_REG_MONTH(mregs);
-		year = MSTK_CVT_YEAR( MSTK_REG_YEAR(mregs) );
-	} else if (bregs) {
+	if (bregs) {
 		unsigned char val = readb(bregs + 0x0e);
 		unsigned int century;
 
@@ -596,14 +618,6 @@ static void __init set_system_time(void)
 	xtime.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ);
 	set_normalized_timespec(&wall_to_monotonic,
  	                        -xtime.tv_sec, -xtime.tv_nsec);
-
-	if (mregs) {
-		tmp = mostek_read(mregs + MOSTEK_CREG);
-		tmp &= ~MSTK_CREG_READ;
-		mostek_write(mregs + MOSTEK_CREG, tmp);
-
-		spin_unlock_irq(&mostek_lock);
-	}
 }
 
 /* davem suggests we keep this within the 4M locked kernel image */
@@ -1027,7 +1041,7 @@ void __init time_init(void)
 	setup_clockevent_multiplier(clock);
 
 	sparc64_clockevent.max_delta_ns =
-		clockevent_delta2ns(0x7fffffffffffffff, &sparc64_clockevent);
+		clockevent_delta2ns(0x7fffffffffffffffUL, &sparc64_clockevent);
 	sparc64_clockevent.min_delta_ns =
 		clockevent_delta2ns(0xF, &sparc64_clockevent);
 
diff --git a/arch/sparc64/kernel/traps.c b/arch/sparc64/kernel/traps.c
index 007f531..96da847 100644
--- a/arch/sparc64/kernel/traps.c
+++ b/arch/sparc64/kernel/traps.c
@@ -42,6 +42,7 @@
 #endif
 #include <asm/prom.h>
 
+#include "entry.h"
 
 /* When an irrecoverable trap occurs at tl > 0, the trap entry
  * code logs the trap state registers at every level in the trap
@@ -77,11 +78,6 @@ static void dump_tl1_traplog(struct tl1_traplog *p)
 	}
 }
 
-void do_call_debug(struct pt_regs *regs) 
-{ 
-	notify_die(DIE_CALL, "debug call", regs, 0, 255, SIGINT); 
-}
-
 void bad_trap(struct pt_regs *regs, long lvl)
 {
 	char buffer[32];
@@ -550,41 +546,6 @@ static unsigned long ecache_flush_physbase;
 static unsigned long ecache_flush_linesize;
 static unsigned long ecache_flush_size;
 
-/* WARNING: The error trap handlers in assembly know the precise
- *	    layout of the following structure.
- *
- * C-level handlers below use this information to log the error
- * and then determine how to recover (if possible).
- */
-struct cheetah_err_info {
-/*0x00*/u64 afsr;
-/*0x08*/u64 afar;
-
-	/* D-cache state */
-/*0x10*/u64 dcache_data[4];	/* The actual data	*/
-/*0x30*/u64 dcache_index;	/* D-cache index	*/
-/*0x38*/u64 dcache_tag;		/* D-cache tag/valid	*/
-/*0x40*/u64 dcache_utag;	/* D-cache microtag	*/
-/*0x48*/u64 dcache_stag;	/* D-cache snooptag	*/
-
-	/* I-cache state */
-/*0x50*/u64 icache_data[8];	/* The actual insns + predecode	*/
-/*0x90*/u64 icache_index;	/* I-cache index	*/
-/*0x98*/u64 icache_tag;		/* I-cache phys tag	*/
-/*0xa0*/u64 icache_utag;	/* I-cache microtag	*/
-/*0xa8*/u64 icache_stag;	/* I-cache snooptag	*/
-/*0xb0*/u64 icache_upper;	/* I-cache upper-tag	*/
-/*0xb8*/u64 icache_lower;	/* I-cache lower-tag	*/
-
-	/* E-cache state */
-/*0xc0*/u64 ecache_data[4];	/* 32 bytes from staging registers */
-/*0xe0*/u64 ecache_index;	/* E-cache index	*/
-/*0xe8*/u64 ecache_tag;		/* E-cache tag/state	*/
-
-/*0xf0*/u64 __pad[32 - 30];
-};
-#define CHAFSR_INVALID		((u64)-1L)
-
 /* This table is ordered in priority of errors and matches the
  * AFAR overwrite policy as well.
  */
@@ -758,10 +719,6 @@ static struct afsr_error_table __jalapeno_error_table[] = {
 static struct afsr_error_table *cheetah_error_table;
 static unsigned long cheetah_afsr_errors;
 
-/* This is allocated at boot time based upon the largest hardware
- * cpu ID in the system.  We allocate two entries per cpu, one for
- * TL==0 logging and one for TL >= 1 logging.
- */
 struct cheetah_err_info *cheetah_error_log;
 
 static inline struct cheetah_err_info *cheetah_get_error_log(unsigned long afsr)
@@ -2102,7 +2059,7 @@ void do_div0(struct pt_regs *regs)
 	force_sig_info(SIGFPE, &info, current);
 }
 
-void instruction_dump (unsigned int *pc)
+static void instruction_dump(unsigned int *pc)
 {
 	int i;
 
@@ -2115,7 +2072,7 @@ void instruction_dump (unsigned int *pc)
 	printk("\n");
 }
 
-static void user_instruction_dump (unsigned int __user *pc)
+static void user_instruction_dump(unsigned int __user *pc)
 {
 	int i;
 	unsigned int buf[9];
diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c
index 466fd6c..f37078d 100644
--- a/arch/sparc64/mm/init.c
+++ b/arch/sparc64/mm/init.c
@@ -46,6 +46,7 @@
 #include <asm/prom.h>
 #include <asm/sstate.h>
 #include <asm/mdesc.h>
+#include <asm/cpudata.h>
 
 #define MAX_PHYS_ADDRESS	(1UL << 42UL)
 #define KPTE_BITMAP_CHUNK_SZ	(256UL * 1024UL * 1024UL)
@@ -1273,10 +1274,6 @@ void __cpuinit sun4v_ktsb_register(void)
 
 /* paging_init() sets up the page tables */
 
-extern void cheetah_ecache_flush_init(void);
-extern void sun4v_patch_tlb_handlers(void);
-
-extern void cpu_probe(void);
 extern void central_probe(void);
 
 static unsigned long last_valid_pfn;
diff --git a/arch/sparc64/mm/tlb.c b/arch/sparc64/mm/tlb.c
index 3f10fc9..ae24919 100644
--- a/arch/sparc64/mm/tlb.c
+++ b/arch/sparc64/mm/tlb.c
@@ -23,9 +23,7 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers) = { 0, };
 
 void flush_tlb_pending(void)
 {
-	struct mmu_gather *mp = &__get_cpu_var(mmu_gathers);
-
-	preempt_disable();
+	struct mmu_gather *mp = &get_cpu_var(mmu_gathers);
 
 	if (mp->tlb_nr) {
 		flush_tsb_user(mp);
@@ -42,7 +40,7 @@ void flush_tlb_pending(void)
 		mp->tlb_nr = 0;
 	}
 
-	preempt_enable();
+	put_cpu_var(mmu_gathers);
 }
 
 void tlb_batch_add(struct mm_struct *mm, unsigned long vaddr, pte_t *ptep, pte_t orig)
diff --git a/arch/um/drivers/net_kern.c b/arch/um/drivers/net_kern.c
index 1e8f41a..1d43bdf 100644
--- a/arch/um/drivers/net_kern.c
+++ b/arch/um/drivers/net_kern.c
@@ -256,11 +256,7 @@ static struct net_device_stats *uml_net_get_stats(struct net_device *dev)
 
 static void uml_net_set_multicast_list(struct net_device *dev)
 {
-	if (dev->flags & IFF_PROMISC)
-		return;
-	else if (dev->mc_count)
-		dev->flags |= IFF_ALLMULTI;
-	else dev->flags &= ~IFF_ALLMULTI;
+	return;
 }
 
 static void uml_net_tx_timeout(struct net_device *dev)
diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
index 45d79ea..5fed98c 100644
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -65,7 +65,8 @@ __setup("noreplace-paravirt", setup_noreplace_paravirt);
    get them easily into strings. */
 asm("\t.section .rodata, \"a\"\nintelnops: "
 	GENERIC_NOP1 GENERIC_NOP2 GENERIC_NOP3 GENERIC_NOP4 GENERIC_NOP5 GENERIC_NOP6
-	GENERIC_NOP7 GENERIC_NOP8);
+	GENERIC_NOP7 GENERIC_NOP8
+    "\t.previous");
 extern const unsigned char intelnops[];
 static const unsigned char *const intel_nops[ASM_NOP_MAX+1] = {
 	NULL,
@@ -83,7 +84,8 @@ static const unsigned char *const intel_nops[ASM_NOP_MAX+1] = {
 #ifdef K8_NOP1
 asm("\t.section .rodata, \"a\"\nk8nops: "
 	K8_NOP1 K8_NOP2 K8_NOP3 K8_NOP4 K8_NOP5 K8_NOP6
-	K8_NOP7 K8_NOP8);
+	K8_NOP7 K8_NOP8
+    "\t.previous");
 extern const unsigned char k8nops[];
 static const unsigned char *const k8_nops[ASM_NOP_MAX+1] = {
 	NULL,
@@ -101,7 +103,8 @@ static const unsigned char *const k8_nops[ASM_NOP_MAX+1] = {
 #ifdef K7_NOP1
 asm("\t.section .rodata, \"a\"\nk7nops: "
 	K7_NOP1 K7_NOP2 K7_NOP3 K7_NOP4 K7_NOP5 K7_NOP6
-	K7_NOP7 K7_NOP8);
+	K7_NOP7 K7_NOP8
+    "\t.previous");
 extern const unsigned char k7nops[];
 static const unsigned char *const k7_nops[ASM_NOP_MAX+1] = {
 	NULL,
@@ -119,7 +122,8 @@ static const unsigned char *const k7_nops[ASM_NOP_MAX+1] = {
 #ifdef P6_NOP1
 asm("\t.section .rodata, \"a\"\np6nops: "
 	P6_NOP1 P6_NOP2 P6_NOP3 P6_NOP4 P6_NOP5 P6_NOP6
-	P6_NOP7 P6_NOP8);
+	P6_NOP7 P6_NOP8
+    "\t.previous");
 extern const unsigned char p6nops[];
 static const unsigned char *const p6_nops[ASM_NOP_MAX+1] = {
 	NULL,
diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c
index 027e5c0..170d2f5 100644
--- a/arch/x86/kernel/cpu/bugs.c
+++ b/arch/x86/kernel/cpu/bugs.c
@@ -143,14 +143,6 @@ static void __init check_config(void)
 #endif
 
 /*
- * If we configured ourselves for a TSC, we'd better have one!
- */
-#ifdef CONFIG_X86_TSC
-	if (!cpu_has_tsc)
-		panic("Kernel compiled for Pentium+, requires TSC feature!");
-#endif
-
-/*
  * If we were told we had a good local APIC, check for buggy Pentia,
  * i.e. all B steppings and the C2 stepping of P54C when using their
  * integrated APIC (see 11AP erratum in "Pentium Processor
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c b/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c
index f2b5a621d..8a85c93 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c
@@ -63,7 +63,7 @@ static struct cpufreq_frequency_table speedstep_freqs[] = {
  */
 static int speedstep_smi_ownership (void)
 {
-	u32 command, result, magic;
+	u32 command, result, magic, dummy;
 	u32 function = GET_SPEEDSTEP_OWNER;
 	unsigned char magic_data[] = "Copyright (c) 1999 Intel Corporation";
 
@@ -73,8 +73,11 @@ static int speedstep_smi_ownership (void)
 	dprintk("trying to obtain ownership with command %x at port %x\n", command, smi_port);
 
 	__asm__ __volatile__(
+		"push %%ebp\n"
 		"out %%al, (%%dx)\n"
-		: "=D" (result)
+		"pop %%ebp\n"
+		: "=D" (result), "=a" (dummy), "=b" (dummy), "=c" (dummy), "=d" (dummy),
+			"=S" (dummy)
 		: "a" (command), "b" (function), "c" (0), "d" (smi_port),
 			"D" (0), "S" (magic)
 		: "memory"
@@ -96,7 +99,7 @@ static int speedstep_smi_ownership (void)
  */
 static int speedstep_smi_get_freqs (unsigned int *low, unsigned int *high)
 {
-	u32 command, result = 0, edi, high_mhz, low_mhz;
+	u32 command, result = 0, edi, high_mhz, low_mhz, dummy;
 	u32 state=0;
 	u32 function = GET_SPEEDSTEP_FREQS;
 
@@ -109,10 +112,12 @@ static int speedstep_smi_get_freqs (unsigned int *low, unsigned int *high)
 
 	dprintk("trying to determine frequencies with command %x at port %x\n", command, smi_port);
 
-	__asm__ __volatile__("movl $0, %%edi\n"
+	__asm__ __volatile__(
+		"push %%ebp\n"
 		"out %%al, (%%dx)\n"
-		: "=a" (result), "=b" (high_mhz), "=c" (low_mhz), "=d" (state), "=D" (edi)
-		: "a" (command), "b" (function), "c" (state), "d" (smi_port), "S" (0)
+		"pop %%ebp"
+		: "=a" (result), "=b" (high_mhz), "=c" (low_mhz), "=d" (state), "=D" (edi), "=S" (dummy)
+		: "a" (command), "b" (function), "c" (state), "d" (smi_port), "S" (0), "D" (0)
 	);
 
 	dprintk("result %x, low_freq %u, high_freq %u\n", result, low_mhz, high_mhz);
@@ -135,16 +140,18 @@ static int speedstep_smi_get_freqs (unsigned int *low, unsigned int *high)
 static int speedstep_get_state (void)
 {
 	u32 function=GET_SPEEDSTEP_STATE;
-	u32 result, state, edi, command;
+	u32 result, state, edi, command, dummy;
 
 	command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
 
 	dprintk("trying to determine current setting with command %x at port %x\n", command, smi_port);
 
-	__asm__ __volatile__("movl $0, %%edi\n"
+	__asm__ __volatile__(
+		"push %%ebp\n"
 		"out %%al, (%%dx)\n"
-		: "=a" (result), "=b" (state), "=D" (edi)
-		: "a" (command), "b" (function), "c" (0), "d" (smi_port), "S" (0)
+		"pop %%ebp\n"
+		: "=a" (result), "=b" (state), "=D" (edi), "=c" (dummy), "=d" (dummy), "=S" (dummy)
+		: "a" (command), "b" (function), "c" (0), "d" (smi_port), "S" (0), "D" (0)
 	);
 
 	dprintk("state is %x, result is %x\n", state, result);
@@ -160,7 +167,7 @@ static int speedstep_get_state (void)
  */
 static void speedstep_set_state (unsigned int state)
 {
-	unsigned int result = 0, command, new_state;
+	unsigned int result = 0, command, new_state, dummy;
 	unsigned long flags;
 	unsigned int function=SET_SPEEDSTEP_STATE;
 	unsigned int retry = 0;
@@ -182,10 +189,12 @@ static void speedstep_set_state (unsigned int state)
 		}
 		retry++;
 		__asm__ __volatile__(
-			"movl $0, %%edi\n"
+			"push %%ebp\n"
 			"out %%al, (%%dx)\n"
-			: "=b" (new_state), "=D" (result)
-			: "a" (command), "b" (function), "c" (state), "d" (smi_port), "S" (0)
+			"pop %%ebp"
+			: "=b" (new_state), "=D" (result), "=c" (dummy), "=a" (dummy),
+				"=d" (dummy), "=S" (dummy)
+			: "a" (command), "b" (function), "c" (state), "d" (smi_port), "S" (0), "D" (0)
 			);
 	} while ((new_state != state) && (retry <= SMI_TRIES));
 
@@ -195,7 +204,7 @@ static void speedstep_set_state (unsigned int state)
 	if (new_state == state) {
 		dprintk("change to %u MHz succeeded after %u tries with result %u\n", (speedstep_freqs[new_state].frequency / 1000), retry, result);
 	} else {
-		printk(KERN_ERR "cpufreq: change failed with new_state %u and result %u\n", new_state, result);
+		printk(KERN_ERR "cpufreq: change to state %u failed with new_state %u and result %u\n", state, new_state, result);
 	}
 
 	return;
diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c
index 103d61a..3e18db4 100644
--- a/arch/x86/kernel/cpu/mtrr/generic.c
+++ b/arch/x86/kernel/cpu/mtrr/generic.c
@@ -176,12 +176,13 @@ static inline void k8_enable_fixed_iorrs(void)
 }
 
 /**
- * Checks and updates an fixed-range MTRR if it differs from the value it
- * should have. If K8 extentions are wanted, update the K8 SYSCFG MSR also.
- * see AMD publication no. 24593, chapter 7.8.1, page 233 for more information
- * \param msr MSR address of the MTTR which should be checked and updated
- * \param changed pointer which indicates whether the MTRR needed to be changed
- * \param msrwords pointer to the MSR values which the MSR should have
+ * set_fixed_range - checks & updates a fixed-range MTRR if it differs from the value it should have
+ * @msr: MSR address of the MTTR which should be checked and updated
+ * @changed: pointer which indicates whether the MTRR needed to be changed
+ * @msrwords: pointer to the MSR values which the MSR should have
+ *
+ * If K8 extentions are wanted, update the K8 SYSCFG MSR also.
+ * See AMD publication no. 24593, chapter 7.8.1, page 233 for more information.
  */
 static void set_fixed_range(int msr, bool *changed, unsigned int *msrwords)
 {
@@ -199,12 +200,15 @@ static void set_fixed_range(int msr, bool *changed, unsigned int *msrwords)
 	}
 }
 
+/**
+ * generic_get_free_region - Get a free MTRR.
+ * @base: The starting (base) address of the region.
+ * @size: The size (in bytes) of the region.
+ * @replace_reg: mtrr index to be replaced; set to invalid value if none.
+ *
+ * Returns: The index of the region on success, else negative on error.
+ */
 int generic_get_free_region(unsigned long base, unsigned long size, int replace_reg)
-/*  [SUMMARY] Get a free MTRR.
-    <base> The starting (base) address of the region.
-    <size> The size (in bytes) of the region.
-    [RETURNS] The index of the region on success, else -1 on error.
-*/
 {
 	int i, max;
 	mtrr_type ltype;
@@ -249,8 +253,8 @@ static void generic_get_mtrr(unsigned int reg, unsigned long *base,
 }
 
 /**
- * Checks and updates the fixed-range MTRRs if they differ from the saved set
- * \param frs pointer to fixed-range MTRR values, saved by get_fixed_ranges()
+ * set_fixed_ranges - checks & updates the fixed-range MTRRs if they differ from the saved set
+ * @frs: pointer to fixed-range MTRR values, saved by get_fixed_ranges()
  */
 static int set_fixed_ranges(mtrr_type * frs)
 {
@@ -294,13 +298,13 @@ static bool set_mtrr_var_ranges(unsigned int index, struct mtrr_var_range *vr)
 
 static u32 deftype_lo, deftype_hi;
 
+/**
+ * set_mtrr_state - Set the MTRR state for this CPU.
+ *
+ * NOTE: The CPU must already be in a safe state for MTRR changes.
+ * RETURNS: 0 if no changes made, else a mask indicating what was changed.
+ */
 static unsigned long set_mtrr_state(void)
-/*  [SUMMARY] Set the MTRR state for this CPU.
-    <state> The MTRR state information to read.
-    <ctxt> Some relevant CPU context.
-    [NOTE] The CPU must already be in a safe state for MTRR changes.
-    [RETURNS] 0 if no changes made, else a mask indication what was changed.
-*/
 {
 	unsigned int i;
 	unsigned long change_mask = 0;
diff --git a/arch/x86/kernel/cpu/perfctr-watchdog.c b/arch/x86/kernel/cpu/perfctr-watchdog.c
index 9b83832..b943e10 100644
--- a/arch/x86/kernel/cpu/perfctr-watchdog.c
+++ b/arch/x86/kernel/cpu/perfctr-watchdog.c
@@ -652,9 +652,6 @@ static void probe_nmi_watchdog(void)
 			wd_ops = &p6_wd_ops;
 			break;
 		case 15:
-			if (boot_cpu_data.x86_model > 0x4)
-				return;
-
 			wd_ops = &p4_wd_ops;
 			break;
 		default:
@@ -670,8 +667,10 @@ int lapic_watchdog_init(unsigned nmi_hz)
 {
 	if (!wd_ops) {
 		probe_nmi_watchdog();
-		if (!wd_ops)
+		if (!wd_ops) {
+			printk(KERN_INFO "NMI watchdog: CPU not supported\n");
 			return -1;
+		}
 
 		if (!wd_ops->reserve()) {
 			printk(KERN_ERR
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index 235fd6c..36652ea 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -133,13 +133,16 @@ static void hpet_reserve_platform_timers(unsigned long id)
 #ifdef CONFIG_HPET_EMULATE_RTC
 	hpet_reserve_timer(&hd, 1);
 #endif
+
 	hd.hd_irq[0] = HPET_LEGACY_8254;
 	hd.hd_irq[1] = HPET_LEGACY_RTC;
 
-       for (i = 2; i < nrtimers; timer++, i++)
-	       hd.hd_irq[i] = (timer->hpet_config & Tn_INT_ROUTE_CNF_MASK) >>
-		       Tn_INT_ROUTE_CNF_SHIFT;
+	for (i = 2; i < nrtimers; timer++, i++)
+		hd.hd_irq[i] = (timer->hpet_config & Tn_INT_ROUTE_CNF_MASK) >>
+			Tn_INT_ROUTE_CNF_SHIFT;
+
 	hpet_alloc(&hd);
+
 }
 #else
 static void hpet_reserve_platform_timers(unsigned long id) { }
diff --git a/arch/x86/kernel/io_delay.c b/arch/x86/kernel/io_delay.c
index c706a30..5921e5f 100644
--- a/arch/x86/kernel/io_delay.c
+++ b/arch/x86/kernel/io_delay.c
@@ -78,6 +78,14 @@ static struct dmi_system_id __initdata io_delay_0xed_port_dmi_table[] = {
 	},
 	{
 		.callback	= dmi_io_delay_0xed_port,
+		.ident		= "HP Pavilion dv6000",
+		.matches	= {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Quanta"),
+			DMI_MATCH(DMI_BOARD_NAME, "30B8")
+		}
+	},
+	{
+		.callback	= dmi_io_delay_0xed_port,
 		.ident		= "HP Pavilion tx1000",
 		.matches	= {
 			DMI_MATCH(DMI_BOARD_VENDOR, "Quanta"),
diff --git a/arch/x86/kernel/machine_kexec_64.c b/arch/x86/kernel/machine_kexec_64.c
index 236d2f8..576a03d 100644
--- a/arch/x86/kernel/machine_kexec_64.c
+++ b/arch/x86/kernel/machine_kexec_64.c
@@ -233,6 +233,7 @@ NORET_TYPE void machine_kexec(struct kimage *image)
 
 void arch_crash_save_vmcoreinfo(void)
 {
+	VMCOREINFO_SYMBOL(phys_base);
 	VMCOREINFO_SYMBOL(init_level4_pgt);
 
 #ifdef CONFIG_NUMA
diff --git a/arch/x86/kernel/mfgpt_32.c b/arch/x86/kernel/mfgpt_32.c
index 027fc06..b402c0f 100644
--- a/arch/x86/kernel/mfgpt_32.c
+++ b/arch/x86/kernel/mfgpt_32.c
@@ -30,6 +30,7 @@
 
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
+#include <linux/module.h>
 #include <asm/geode.h>
 
 static struct mfgpt_timer_t {
diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c
index faf3229..700e464 100644
--- a/arch/x86/kernel/pci-gart_64.c
+++ b/arch/x86/kernel/pci-gart_64.c
@@ -615,8 +615,8 @@ static __init int init_k8_gatt(struct agp_kern_info *info)
 
  nommu:
 	/* Should not happen anymore */
-	printk(KERN_ERR "PCI-DMA: More than 4GB of RAM and no IOMMU\n"
-	       KERN_ERR "PCI-DMA: 32bit PCI IO may malfunction.\n");
+	printk(KERN_WARNING "PCI-DMA: More than 4GB of RAM and no IOMMU\n"
+	       KERN_WARNING "falling back to iommu=soft.\n");
 	return -1;
 }
 
@@ -692,9 +692,9 @@ void __init gart_iommu_init(void)
 	    !gart_iommu_aperture ||
 	    (no_agp && init_k8_gatt(&info) < 0)) {
 		if (end_pfn > MAX_DMA32_PFN) {
-			printk(KERN_ERR "WARNING more than 4GB of memory "
-					"but GART IOMMU not available.\n"
-			       KERN_ERR "WARNING 32bit PCI may malfunction.\n");
+			printk(KERN_WARNING "More than 4GB of memory "
+			       	          "but GART IOMMU not available.\n"
+			       KERN_WARNING "falling back to iommu=soft.\n");
 		}
 		return;
 	}
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index be3c7a2..43930e7 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -82,7 +82,6 @@ unsigned long thread_saved_pc(struct task_struct *tsk)
  */
 void (*pm_idle)(void);
 EXPORT_SYMBOL(pm_idle);
-static DEFINE_PER_CPU(unsigned int, cpu_idle_state);
 
 void disable_hlt(void)
 {
@@ -190,9 +189,6 @@ void cpu_idle(void)
 		while (!need_resched()) {
 			void (*idle)(void);
 
-			if (__get_cpu_var(cpu_idle_state))
-				__get_cpu_var(cpu_idle_state) = 0;
-
 			check_pgt_cache();
 			rmb();
 			idle = pm_idle;
@@ -220,40 +216,19 @@ static void do_nothing(void *unused)
 {
 }
 
+/*
+ * cpu_idle_wait - Used to ensure that all the CPUs discard old value of
+ * pm_idle and update to new pm_idle value. Required while changing pm_idle
+ * handler on SMP systems.
+ *
+ * Caller must have changed pm_idle to the new value before the call. Old
+ * pm_idle value will not be used by any CPU after the return of this function.
+ */
 void cpu_idle_wait(void)
 {
-	unsigned int cpu, this_cpu = get_cpu();
-	cpumask_t map, tmp = current->cpus_allowed;
-
-	set_cpus_allowed(current, cpumask_of_cpu(this_cpu));
-	put_cpu();
-
-	cpus_clear(map);
-	for_each_online_cpu(cpu) {
-		per_cpu(cpu_idle_state, cpu) = 1;
-		cpu_set(cpu, map);
-	}
-
-	__get_cpu_var(cpu_idle_state) = 0;
-
-	wmb();
-	do {
-		ssleep(1);
-		for_each_online_cpu(cpu) {
-			if (cpu_isset(cpu, map) && !per_cpu(cpu_idle_state, cpu))
-				cpu_clear(cpu, map);
-		}
-		cpus_and(map, map, cpu_online_map);
-		/*
-		 * We waited 1 sec, if a CPU still did not call idle
-		 * it may be because it is in idle and not waking up
-		 * because it has nothing to do.
-		 * Give all the remaining CPUS a kick.
-		 */
-		smp_call_function_mask(map, do_nothing, NULL, 0);
-	} while (!cpus_empty(map));
-
-	set_cpus_allowed(current, tmp);
+	smp_mb();
+	/* kick all the CPUs so that they exit out of pm_idle */
+	smp_call_function(do_nothing, NULL, 0, 1);
 }
 EXPORT_SYMBOL_GPL(cpu_idle_wait);
 
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index 3baf9b9..46c4c54 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -63,7 +63,6 @@ EXPORT_SYMBOL(boot_option_idle_override);
  */
 void (*pm_idle)(void);
 EXPORT_SYMBOL(pm_idle);
-static DEFINE_PER_CPU(unsigned int, cpu_idle_state);
 
 static ATOMIC_NOTIFIER_HEAD(idle_notifier);
 
@@ -173,9 +172,6 @@ void cpu_idle(void)
 		while (!need_resched()) {
 			void (*idle)(void);
 
-			if (__get_cpu_var(cpu_idle_state))
-				__get_cpu_var(cpu_idle_state) = 0;
-
 			rmb();
 			idle = pm_idle;
 			if (!idle)
@@ -207,40 +203,19 @@ static void do_nothing(void *unused)
 {
 }
 
+/*
+ * cpu_idle_wait - Used to ensure that all the CPUs discard old value of
+ * pm_idle and update to new pm_idle value. Required while changing pm_idle
+ * handler on SMP systems.
+ *
+ * Caller must have changed pm_idle to the new value before the call. Old
+ * pm_idle value will not be used by any CPU after the return of this function.
+ */
 void cpu_idle_wait(void)
 {
-	unsigned int cpu, this_cpu = get_cpu();
-	cpumask_t map, tmp = current->cpus_allowed;
-
-	set_cpus_allowed(current, cpumask_of_cpu(this_cpu));
-	put_cpu();
-
-	cpus_clear(map);
-	for_each_online_cpu(cpu) {
-		per_cpu(cpu_idle_state, cpu) = 1;
-		cpu_set(cpu, map);
-	}
-
-	__get_cpu_var(cpu_idle_state) = 0;
-
-	wmb();
-	do {
-		ssleep(1);
-		for_each_online_cpu(cpu) {
-			if (cpu_isset(cpu, map) && !per_cpu(cpu_idle_state, cpu))
-				cpu_clear(cpu, map);
-		}
-		cpus_and(map, map, cpu_online_map);
-		/*
-		 * We waited 1 sec, if a CPU still did not call idle
-		 * it may be because it is in idle and not waking up
-		 * because it has nothing to do.
-		 * Give all the remaining CPUS a kick.
-		 */
-		smp_call_function_mask(map, do_nothing, 0, 0);
-	} while (!cpus_empty(map));
-
-	set_cpus_allowed(current, tmp);
+	smp_mb();
+	/* kick all the CPUs so that they exit out of pm_idle */
+	smp_call_function(do_nothing, NULL, 0, 1);
 }
 EXPORT_SYMBOL_GPL(cpu_idle_wait);
 
diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index d5904ee..eb92ccb 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -600,21 +600,6 @@ static int ptrace_bts_read_record(struct task_struct *child,
 	return sizeof(ret);
 }
 
-static int ptrace_bts_write_record(struct task_struct *child,
-				   const struct bts_struct *in)
-{
-	int retval;
-
-	if (!child->thread.ds_area_msr)
-		return -ENXIO;
-
-	retval = ds_write_bts((void *)child->thread.ds_area_msr, in);
-	if (retval)
-		return retval;
-
-	return sizeof(*in);
-}
-
 static int ptrace_bts_clear(struct task_struct *child)
 {
 	if (!child->thread.ds_area_msr)
@@ -657,75 +642,6 @@ static int ptrace_bts_drain(struct task_struct *child,
 	return end;
 }
 
-static int ptrace_bts_realloc(struct task_struct *child,
-			      int size, int reduce_size)
-{
-	unsigned long rlim, vm;
-	int ret, old_size;
-
-	if (size < 0)
-		return -EINVAL;
-
-	old_size = ds_get_bts_size((void *)child->thread.ds_area_msr);
-	if (old_size < 0)
-		return old_size;
-
-	ret = ds_free((void **)&child->thread.ds_area_msr);
-	if (ret < 0)
-		goto out;
-
-	size >>= PAGE_SHIFT;
-	old_size >>= PAGE_SHIFT;
-
-	current->mm->total_vm  -= old_size;
-	current->mm->locked_vm -= old_size;
-
-	if (size == 0)
-		goto out;
-
-	rlim = current->signal->rlim[RLIMIT_AS].rlim_cur >> PAGE_SHIFT;
-	vm = current->mm->total_vm  + size;
-	if (rlim < vm) {
-		ret = -ENOMEM;
-
-		if (!reduce_size)
-			goto out;
-
-		size = rlim - current->mm->total_vm;
-		if (size <= 0)
-			goto out;
-	}
-
-	rlim = current->signal->rlim[RLIMIT_MEMLOCK].rlim_cur >> PAGE_SHIFT;
-	vm = current->mm->locked_vm  + size;
-	if (rlim < vm) {
-		ret = -ENOMEM;
-
-		if (!reduce_size)
-			goto out;
-
-		size = rlim - current->mm->locked_vm;
-		if (size <= 0)
-			goto out;
-	}
-
-	ret = ds_allocate((void **)&child->thread.ds_area_msr,
-			  size << PAGE_SHIFT);
-	if (ret < 0)
-		goto out;
-
-	current->mm->total_vm  += size;
-	current->mm->locked_vm += size;
-
-out:
-	if (child->thread.ds_area_msr)
-		set_tsk_thread_flag(child, TIF_DS_AREA_MSR);
-	else
-		clear_tsk_thread_flag(child, TIF_DS_AREA_MSR);
-
-	return ret;
-}
-
 static int ptrace_bts_config(struct task_struct *child,
 			     long cfg_size,
 			     const struct ptrace_bts_config __user *ucfg)
@@ -828,6 +744,91 @@ static int ptrace_bts_status(struct task_struct *child,
 	return sizeof(cfg);
 }
 
+
+static int ptrace_bts_write_record(struct task_struct *child,
+				   const struct bts_struct *in)
+{
+	int retval;
+
+	if (!child->thread.ds_area_msr)
+		return -ENXIO;
+
+	retval = ds_write_bts((void *)child->thread.ds_area_msr, in);
+	if (retval)
+		return retval;
+
+	return sizeof(*in);
+}
+
+static int ptrace_bts_realloc(struct task_struct *child,
+			      int size, int reduce_size)
+{
+	unsigned long rlim, vm;
+	int ret, old_size;
+
+	if (size < 0)
+		return -EINVAL;
+
+	old_size = ds_get_bts_size((void *)child->thread.ds_area_msr);
+	if (old_size < 0)
+		return old_size;
+
+	ret = ds_free((void **)&child->thread.ds_area_msr);
+	if (ret < 0)
+		goto out;
+
+	size >>= PAGE_SHIFT;
+	old_size >>= PAGE_SHIFT;
+
+	current->mm->total_vm  -= old_size;
+	current->mm->locked_vm -= old_size;
+
+	if (size == 0)
+		goto out;
+
+	rlim = current->signal->rlim[RLIMIT_AS].rlim_cur >> PAGE_SHIFT;
+	vm = current->mm->total_vm  + size;
+	if (rlim < vm) {
+		ret = -ENOMEM;
+
+		if (!reduce_size)
+			goto out;
+
+		size = rlim - current->mm->total_vm;
+		if (size <= 0)
+			goto out;
+	}
+
+	rlim = current->signal->rlim[RLIMIT_MEMLOCK].rlim_cur >> PAGE_SHIFT;
+	vm = current->mm->locked_vm  + size;
+	if (rlim < vm) {
+		ret = -ENOMEM;
+
+		if (!reduce_size)
+			goto out;
+
+		size = rlim - current->mm->locked_vm;
+		if (size <= 0)
+			goto out;
+	}
+
+	ret = ds_allocate((void **)&child->thread.ds_area_msr,
+			  size << PAGE_SHIFT);
+	if (ret < 0)
+		goto out;
+
+	current->mm->total_vm  += size;
+	current->mm->locked_vm += size;
+
+out:
+	if (child->thread.ds_area_msr)
+		set_tsk_thread_flag(child, TIF_DS_AREA_MSR);
+	else
+		clear_tsk_thread_flag(child, TIF_DS_AREA_MSR);
+
+	return ret;
+}
+
 void ptrace_bts_take_timestamp(struct task_struct *tsk,
 			       enum bts_qualifier qualifier)
 {
diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c
index a1d7071..2b3e5d4 100644
--- a/arch/x86/kernel/setup_32.c
+++ b/arch/x86/kernel/setup_32.c
@@ -406,8 +406,6 @@ static unsigned long __init setup_memory(void)
 	 */
 	min_low_pfn = PFN_UP(init_pg_tables_end);
 
-	find_max_pfn();
-
 	max_low_pfn = find_max_low_pfn();
 
 #ifdef CONFIG_HIGHMEM
@@ -764,12 +762,13 @@ void __init setup_arch(char **cmdline_p)
 	if (efi_enabled)
 		efi_init();
 
-	max_low_pfn = setup_memory();
-
 	/* update e820 for memory not covered by WB MTRRs */
+	find_max_pfn();
 	mtrr_bp_init();
 	if (mtrr_trim_uncached_memory(max_pfn))
-		max_low_pfn = setup_memory();
+		find_max_pfn();
+
+	max_low_pfn = setup_memory();
 
 #ifdef CONFIG_VMI
 	/*
diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c
index 7637dc9..f4f7ecf 100644
--- a/arch/x86/kernel/setup_64.c
+++ b/arch/x86/kernel/setup_64.c
@@ -801,7 +801,7 @@ static void __cpuinit srat_detect_node(void)
 	/* Don't do the funky fallback heuristics the AMD version employs
 	   for now. */
 	node = apicid_to_node[apicid];
-	if (node == NUMA_NO_NODE)
+	if (node == NUMA_NO_NODE || !node_online(node))
 		node = first_node(node_online_map);
 	numa_set_node(cpu, node);
 
diff --git a/arch/x86/kernel/step.c b/arch/x86/kernel/step.c
index 9d406cd..071ff47 100644
--- a/arch/x86/kernel/step.c
+++ b/arch/x86/kernel/step.c
@@ -140,6 +140,9 @@ static int enable_single_step(struct task_struct *child)
  */
 static void write_debugctlmsr(struct task_struct *child, unsigned long val)
 {
+	if (child->thread.debugctlmsr == val)
+		return;
+
 	child->thread.debugctlmsr = val;
 
 	if (child != current)
@@ -165,11 +168,11 @@ static void enable_step(struct task_struct *child, bool block)
 		write_debugctlmsr(child,
 				  child->thread.debugctlmsr | DEBUGCTLMSR_BTF);
 	} else {
-	    write_debugctlmsr(child,
-			      child->thread.debugctlmsr & ~DEBUGCTLMSR_BTF);
+		write_debugctlmsr(child,
+				  child->thread.debugctlmsr & ~DEBUGCTLMSR_BTF);
 
-	    if (!child->thread.debugctlmsr)
-		    clear_tsk_thread_flag(child, TIF_DEBUGCTLMSR);
+		if (!child->thread.debugctlmsr)
+			clear_tsk_thread_flag(child, TIF_DEBUGCTLMSR);
 	}
 }
 
diff --git a/arch/x86/kernel/tls.c b/arch/x86/kernel/tls.c
index 022bcaa..ab6bf37 100644
--- a/arch/x86/kernel/tls.c
+++ b/arch/x86/kernel/tls.c
@@ -92,7 +92,7 @@ int do_set_thread_area(struct task_struct *p, int idx,
 asmlinkage int sys_set_thread_area(struct user_desc __user *u_info)
 {
 	int ret = do_set_thread_area(current, -1, u_info, 1);
-	prevent_tail_call(ret);
+	asmlinkage_protect(1, ret, u_info);
 	return ret;
 }
 
@@ -142,7 +142,7 @@ int do_get_thread_area(struct task_struct *p, int idx,
 asmlinkage int sys_get_thread_area(struct user_desc __user *u_info)
 {
 	int ret = do_get_thread_area(current, -1, u_info);
-	prevent_tail_call(ret);
+	asmlinkage_protect(1, ret, u_info);
 	return ret;
 }
 
diff --git a/arch/x86/kernel/tsc_32.c b/arch/x86/kernel/tsc_32.c
index f14cfd9..c2241e0 100644
--- a/arch/x86/kernel/tsc_32.c
+++ b/arch/x86/kernel/tsc_32.c
@@ -256,9 +256,7 @@ time_cpufreq_notifier(struct notifier_block *nb, unsigned long val, void *data)
 						ref_freq, freq->new);
 			if (!(freq->flags & CPUFREQ_CONST_LOOPS)) {
 				tsc_khz = cpu_khz;
-				preempt_disable();
-				set_cyc2ns_scale(cpu_khz, smp_processor_id());
-				preempt_enable();
+				set_cyc2ns_scale(cpu_khz, freq->cpu);
 				/*
 				 * TSC based sched_clock turns
 				 * to junk w/ cpufreq
diff --git a/arch/x86/kernel/tsc_64.c b/arch/x86/kernel/tsc_64.c
index 947554d..d3bebaa 100644
--- a/arch/x86/kernel/tsc_64.c
+++ b/arch/x86/kernel/tsc_64.c
@@ -148,9 +148,7 @@ static int time_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
 			mark_tsc_unstable("cpufreq changes");
 	}
 
-	preempt_disable();
-	set_cyc2ns_scale(tsc_khz_ref, smp_processor_id());
-	preempt_enable();
+	set_cyc2ns_scale(tsc_khz_ref, freq->cpu);
 
 	return 0;
 }
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index a104c53..3335b45 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -10,21 +10,19 @@
  * (such as the example in Documentation/lguest/lguest.c) is called the
  * Launcher.
  *
- * Secondly, we only run specially modified Guests, not normal kernels.  When
- * you set CONFIG_LGUEST to 'y' or 'm', this automatically sets
- * CONFIG_LGUEST_GUEST=y, which compiles this file into the kernel so it knows
- * how to be a Guest.  This means that you can use the same kernel you boot
- * normally (ie. as a Host) as a Guest.
+ * Secondly, we only run specially modified Guests, not normal kernels: setting
+ * CONFIG_LGUEST_GUEST to "y" compiles this file into the kernel so it knows
+ * how to be a Guest at boot time.  This means that you can use the same kernel
+ * you boot normally (ie. as a Host) as a Guest.
  *
  * These Guests know that they cannot do privileged operations, such as disable
  * interrupts, and that they have to ask the Host to do such things explicitly.
  * This file consists of all the replacements for such low-level native
  * hardware operations: these special Guest versions call the Host.
  *
- * So how does the kernel know it's a Guest?  The Guest starts at a special
- * entry point marked with a magic string, which sets up a few things then
- * calls here.  We replace the native functions various "paravirt" structures
- * with our Guest versions, then boot like normal. :*/
+ * So how does the kernel know it's a Guest?  We'll see that later, but let's
+ * just say that we end up here where we replace the native functions various
+ * "paravirt" structures with our Guest versions, then boot like normal. :*/
 
 /*
  * Copyright (C) 2006, Rusty Russell <rusty@rustcorp.com.au> IBM Corporation.
@@ -134,7 +132,7 @@ static void async_hcall(unsigned long call, unsigned long arg1,
  * lguest_leave_lazy_mode().
  *
  * So, when we're in lazy mode, we call async_hcall() to store the call for
- * future processing. */
+ * future processing: */
 static void lazy_hcall(unsigned long call,
 		       unsigned long arg1,
 		       unsigned long arg2,
@@ -147,7 +145,7 @@ static void lazy_hcall(unsigned long call,
 }
 
 /* When lazy mode is turned off reset the per-cpu lazy mode variable and then
- * issue a hypercall to flush any stored calls. */
+ * issue the do-nothing hypercall to flush any stored calls. */
 static void lguest_leave_lazy_mode(void)
 {
 	paravirt_leave_lazy(paravirt_get_lazy_mode());
@@ -164,7 +162,7 @@ static void lguest_leave_lazy_mode(void)
  *
  * So instead we keep an "irq_enabled" field inside our "struct lguest_data",
  * which the Guest can update with a single instruction.  The Host knows to
- * check there when it wants to deliver an interrupt.
+ * check there before it tries to deliver an interrupt.
  */
 
 /* save_flags() is expected to return the processor state (ie. "flags").  The
@@ -196,10 +194,15 @@ static void irq_enable(void)
 /*M:003 Note that we don't check for outstanding interrupts when we re-enable
  * them (or when we unmask an interrupt).  This seems to work for the moment,
  * since interrupts are rare and we'll just get the interrupt on the next timer
- * tick, but when we turn on CONFIG_NO_HZ, we should revisit this.  One way
+ * tick, but now we can run with CONFIG_NO_HZ, we should revisit this.  One way
  * would be to put the "irq_enabled" field in a page by itself, and have the
  * Host write-protect it when an interrupt comes in when irqs are disabled.
- * There will then be a page fault as soon as interrupts are re-enabled. :*/
+ * There will then be a page fault as soon as interrupts are re-enabled.
+ *
+ * A better method is to implement soft interrupt disable generally for x86:
+ * instead of disabling interrupts, we set a flag.  If an interrupt does come
+ * in, we then disable them for real.  This is uncommon, so we could simply use
+ * a hypercall for interrupt control and not worry about efficiency. :*/
 
 /*G:034
  * The Interrupt Descriptor Table (IDT).
@@ -212,6 +215,10 @@ static void irq_enable(void)
 static void lguest_write_idt_entry(gate_desc *dt,
 				   int entrynum, const gate_desc *g)
 {
+	/* The gate_desc structure is 8 bytes long: we hand it to the Host in
+	 * two 32-bit chunks.  The whole 32-bit kernel used to hand descriptors
+	 * around like this; typesafety wasn't a big concern in Linux's early
+	 * years. */
 	u32 *desc = (u32 *)g;
 	/* Keep the local copy up to date. */
 	native_write_idt_entry(dt, entrynum, g);
@@ -243,7 +250,8 @@ static void lguest_load_idt(const struct desc_ptr *desc)
  *
  * This is the opposite of the IDT code where we have a LOAD_IDT_ENTRY
  * hypercall and use that repeatedly to load a new IDT.  I don't think it
- * really matters, but wouldn't it be nice if they were the same?
+ * really matters, but wouldn't it be nice if they were the same?  Wouldn't
+ * it be even better if you were the one to send the patch to fix it?
  */
 static void lguest_load_gdt(const struct desc_ptr *desc)
 {
@@ -298,9 +306,9 @@ static void lguest_load_tr_desc(void)
 
 /* The "cpuid" instruction is a way of querying both the CPU identity
  * (manufacturer, model, etc) and its features.  It was introduced before the
- * Pentium in 1993 and keeps getting extended by both Intel and AMD.  As you
- * might imagine, after a decade and a half this treatment, it is now a giant
- * ball of hair.  Its entry in the current Intel manual runs to 28 pages.
+ * Pentium in 1993 and keeps getting extended by both Intel, AMD and others.
+ * As you might imagine, after a decade and a half this treatment, it is now a
+ * giant ball of hair.  Its entry in the current Intel manual runs to 28 pages.
  *
  * This instruction even it has its own Wikipedia entry.  The Wikipedia entry
  * has been translated into 4 languages.  I am not making this up!
@@ -594,17 +602,17 @@ static unsigned long lguest_get_wallclock(void)
 	return lguest_data.time.tv_sec;
 }
 
-/* The TSC is a Time Stamp Counter.  The Host tells us what speed it runs at,
- * or 0 if it's unusable as a reliable clock source.  This matches what we want
- * here: if we return 0 from this function, the x86 TSC clock will not register
- * itself. */
+/* The TSC is an Intel thing called the Time Stamp Counter.  The Host tells us
+ * what speed it runs at, or 0 if it's unusable as a reliable clock source.
+ * This matches what we want here: if we return 0 from this function, the x86
+ * TSC clock will give up and not register itself. */
 static unsigned long lguest_cpu_khz(void)
 {
 	return lguest_data.tsc_khz;
 }
 
-/* If we can't use the TSC, the kernel falls back to our "lguest_clock", where
- * we read the time value given to us by the Host. */
+/* If we can't use the TSC, the kernel falls back to our lower-priority
+ * "lguest_clock", where we read the time value given to us by the Host. */
 static cycle_t lguest_clock_read(void)
 {
 	unsigned long sec, nsec;
@@ -648,12 +656,16 @@ static struct clocksource lguest_clock = {
 static int lguest_clockevent_set_next_event(unsigned long delta,
                                            struct clock_event_device *evt)
 {
+	/* FIXME: I don't think this can ever happen, but James tells me he had
+	 * to put this code in.  Maybe we should remove it now.  Anyone? */
 	if (delta < LG_CLOCK_MIN_DELTA) {
 		if (printk_ratelimit())
 			printk(KERN_DEBUG "%s: small delta %lu ns\n",
 			       __FUNCTION__, delta);
 		return -ETIME;
 	}
+
+	/* Please wake us this far in the future. */
 	hcall(LHCALL_SET_CLOCKEVENT, delta, 0, 0);
 	return 0;
 }
@@ -738,7 +750,7 @@ static void lguest_time_init(void)
  * will not tolerate us trying to use that), the stack pointer, and the number
  * of pages in the stack. */
 static void lguest_load_sp0(struct tss_struct *tss,
-				     struct thread_struct *thread)
+			    struct thread_struct *thread)
 {
 	lazy_hcall(LHCALL_SET_STACK, __KERNEL_DS|0x1, thread->sp0,
 		   THREAD_SIZE/PAGE_SIZE);
@@ -786,9 +798,8 @@ static void lguest_safe_halt(void)
 	hcall(LHCALL_HALT, 0, 0, 0);
 }
 
-/* Perhaps CRASH isn't the best name for this hypercall, but we use it to get a
- * message out when we're crashing as well as elegant termination like powering
- * off.
+/* The SHUTDOWN hypercall takes a string to describe what's happening, and
+ * an argument which says whether this to restart (reboot) the Guest or not.
  *
  * Note that the Host always prefers that the Guest speak in physical addresses
  * rather than virtual addresses, so we use __pa() here. */
@@ -816,8 +827,9 @@ static struct notifier_block paniced = {
 /* Setting up memory is fairly easy. */
 static __init char *lguest_memory_setup(void)
 {
-	/* We do this here and not earlier because lockcheck barfs if we do it
-	 * before start_kernel() */
+	/* We do this here and not earlier because lockcheck used to barf if we
+	 * did it before start_kernel().  I think we fixed that, so it'd be
+	 * nice to move it back to lguest_init.  Patch welcome... */
 	atomic_notifier_chain_register(&panic_notifier_list, &paniced);
 
 	/* The Linux bootloader header contains an "e820" memory map: the
@@ -850,12 +862,19 @@ static __init int early_put_chars(u32 vtermno, const char *buf, int count)
 	return len;
 }
 
+/* Rebooting also tells the Host we're finished, but the RESTART flag tells the
+ * Launcher to reboot us. */
+static void lguest_restart(char *reason)
+{
+	hcall(LHCALL_SHUTDOWN, __pa(reason), LGUEST_SHUTDOWN_RESTART, 0);
+}
+
 /*G:050
  * Patching (Powerfully Placating Performance Pedants)
  *
- * We have already seen that pv_ops structures let us replace simple
- * native instructions with calls to the appropriate back end all throughout
- * the kernel.  This allows the same kernel to run as a Guest and as a native
+ * We have already seen that pv_ops structures let us replace simple native
+ * instructions with calls to the appropriate back end all throughout the
+ * kernel.  This allows the same kernel to run as a Guest and as a native
  * kernel, but it's slow because of all the indirect branches.
  *
  * Remember that David Wheeler quote about "Any problem in computer science can
@@ -908,14 +927,9 @@ static unsigned lguest_patch(u8 type, u16 clobber, void *ibuf,
 	return insn_len;
 }
 
-static void lguest_restart(char *reason)
-{
-	hcall(LHCALL_SHUTDOWN, __pa(reason), LGUEST_SHUTDOWN_RESTART, 0);
-}
-
-/*G:030 Once we get to lguest_init(), we know we're a Guest.  The pv_ops
- * structures in the kernel provide points for (almost) every routine we have
- * to override to avoid privileged instructions. */
+/*G:030 Once we get to lguest_init(), we know we're a Guest.  The various
+ * pv_ops structures in the kernel provide points for (almost) every routine we
+ * have to override to avoid privileged instructions. */
 __init void lguest_init(void)
 {
 	/* We're under lguest, paravirt is enabled, and we're running at
@@ -1003,9 +1017,9 @@ __init void lguest_init(void)
 	 * the normal data segment to get through booting. */
 	asm volatile ("mov %0, %%fs" : : "r" (__KERNEL_DS) : "memory");
 
-	/* The Host uses the top of the Guest's virtual address space for the
-	 * Host<->Guest Switcher, and it tells us how big that is in
-	 * lguest_data.reserve_mem, set up on the LGUEST_INIT hypercall. */
+	/* The Host<->Guest Switcher lives at the top of our address space, and
+	 * the Host told us how big it is when we made LGUEST_INIT hypercall:
+	 * it put the answer in lguest_data.reserve_mem  */
 	reserve_top_address(lguest_data.reserve_mem);
 
 	/* If we don't initialize the lock dependency checker now, it crashes
@@ -1027,6 +1041,7 @@ __init void lguest_init(void)
 	/* Math is always hard! */
 	new_cpu_data.hard_math = 1;
 
+	/* We don't have features.  We have puppies!  Puppies! */
 #ifdef CONFIG_X86_MCE
 	mce_disabled = 1;
 #endif
@@ -1044,10 +1059,11 @@ __init void lguest_init(void)
 	virtio_cons_early_init(early_put_chars);
 
 	/* Last of all, we set the power management poweroff hook to point to
-	 * the Guest routine to power off. */
+	 * the Guest routine to power off, and the reboot hook to our restart
+	 * routine. */
 	pm_power_off = lguest_power_off;
-
 	machine_ops.restart = lguest_restart;
+
 	/* Now we're set up, call start_kernel() in init/main.c and we proceed
 	 * to boot as normal.  It never returns. */
 	start_kernel();
diff --git a/arch/x86/lguest/i386_head.S b/arch/x86/lguest/i386_head.S
index 95b6fbc..5c7cef3 100644
--- a/arch/x86/lguest/i386_head.S
+++ b/arch/x86/lguest/i386_head.S
@@ -5,13 +5,20 @@
 #include <asm/thread_info.h>
 #include <asm/processor-flags.h>
 
-/*G:020 This is where we begin: head.S notes that the boot header's platform
- * type field is "1" (lguest), so calls us here.
+/*G:020 Our story starts with the kernel booting into startup_32 in
+ * arch/x86/kernel/head_32.S.  It expects a boot header, which is created by
+ * the bootloader (the Launcher in our case).
+ *
+ * The startup_32 function does very little: it clears the uninitialized global
+ * C variables which we expect to be zero (ie. BSS) and then copies the boot
+ * header and kernel command line somewhere safe.  Finally it checks the
+ * 'hardware_subarch' field.  This was introduced in 2.6.24 for lguest and Xen:
+ * if it's set to '1' (lguest's assigned number), then it calls us here.
  *
  * WARNING: be very careful here!  We're running at addresses equal to physical
  * addesses (around 0), not above PAGE_OFFSET as most code expectes
  * (eg. 0xC0000000).  Jumps are relative, so they're OK, but we can't touch any
- * data.
+ * data without remembering to subtract __PAGE_OFFSET!
  *
  * The .section line puts this code in .init.text so it will be discarded after
  * boot. */
@@ -24,7 +31,7 @@ ENTRY(lguest_entry)
 	int $LGUEST_TRAP_ENTRY
 
 	/* The Host put the toplevel pagetable in lguest_data.pgdir.  The movsl
-	 * instruction uses %esi implicitly as the source for the copy we'
+	 * instruction uses %esi implicitly as the source for the copy we're
 	 * about to do. */
 	movl lguest_data - __PAGE_OFFSET + LGUEST_DATA_pgdir, %esi
 
diff --git a/arch/x86/mach-rdc321x/gpio.c b/arch/x86/mach-rdc321x/gpio.c
index 0312691..247f33d 100644
--- a/arch/x86/mach-rdc321x/gpio.c
+++ b/arch/x86/mach-rdc321x/gpio.c
@@ -1,91 +1,194 @@
 /*
- *  Copyright (C) 2007, OpenWrt.org, Florian Fainelli <florian@openwrt.org>
- *  	RDC321x architecture specific GPIO support
+ *  GPIO support for RDC SoC R3210/R8610
+ *
+ *  Copyright (C) 2007, Florian Fainelli <florian@openwrt.org>
+ *  Copyright (C) 2008, Volker Weiss <dev@tintuc.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
  */
 
-#include <linux/autoconf.h>
-#include <linux/init.h>
+
+#include <linux/spinlock.h>
 #include <linux/io.h>
 #include <linux/types.h>
 #include <linux/module.h>
-#include <linux/delay.h>
 
+#include <asm/gpio.h>
 #include <asm/mach-rdc321x/rdc321x_defs.h>
 
-static inline int rdc_gpio_is_valid(unsigned gpio)
+
+/* spin lock to protect our private copy of GPIO data register plus
+   the access to PCI conf registers. */
+static DEFINE_SPINLOCK(gpio_lock);
+
+/* copy of GPIO data registers */
+static u32 gpio_data_reg1;
+static u32 gpio_data_reg2;
+
+static u32 gpio_request_data[2];
+
+
+static inline void rdc321x_conf_write(unsigned addr, u32 value)
 {
-	return (gpio <= RDC_MAX_GPIO);
+	outl((1 << 31) | (7 << 11) | addr, RDC3210_CFGREG_ADDR);
+	outl(value, RDC3210_CFGREG_DATA);
 }
 
-static unsigned int rdc_gpio_read(unsigned gpio)
+static inline void rdc321x_conf_or(unsigned addr, u32 value)
 {
-	unsigned int val;
-
-	val = 0x80000000 | (7 << 11) | ((gpio&0x20?0x84:0x48));
-	outl(val, RDC3210_CFGREG_ADDR);
-	udelay(10);
-	val = inl(RDC3210_CFGREG_DATA);
-	val |= (0x1 << (gpio & 0x1F));
-	outl(val, RDC3210_CFGREG_DATA);
-	udelay(10);
-	val = 0x80000000 | (7 << 11) | ((gpio&0x20?0x88:0x4C));
-	outl(val, RDC3210_CFGREG_ADDR);
-	udelay(10);
-	val = inl(RDC3210_CFGREG_DATA);
-
-	return val;
+	outl((1 << 31) | (7 << 11) | addr, RDC3210_CFGREG_ADDR);
+	value |= inl(RDC3210_CFGREG_DATA);
+	outl(value, RDC3210_CFGREG_DATA);
 }
 
-static void rdc_gpio_write(unsigned int val)
+static inline u32 rdc321x_conf_read(unsigned addr)
 {
-	if (val) {
-		outl(val, RDC3210_CFGREG_DATA);
-		udelay(10);
-	}
+	outl((1 << 31) | (7 << 11) | addr, RDC3210_CFGREG_ADDR);
+
+	return inl(RDC3210_CFGREG_DATA);
 }
 
-int rdc_gpio_get_value(unsigned gpio)
+/* configure pin as GPIO */
+static void rdc321x_configure_gpio(unsigned gpio)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&gpio_lock, flags);
+	rdc321x_conf_or(gpio < 32
+		? RDC321X_GPIO_CTRL_REG1 : RDC321X_GPIO_CTRL_REG2,
+		1 << (gpio & 0x1f));
+	spin_unlock_irqrestore(&gpio_lock, flags);
+}
+
+/* initially setup the 2 copies of the gpio data registers.
+   This function must be called by the platform setup code. */
+void __init rdc321x_gpio_setup()
+{
+	/* this might not be, what others (BIOS, bootloader, etc.)
+	   wrote to these registers before, but it's a good guess. Still
+	   better than just using 0xffffffff. */
+
+	gpio_data_reg1 = rdc321x_conf_read(RDC321X_GPIO_DATA_REG1);
+	gpio_data_reg2 = rdc321x_conf_read(RDC321X_GPIO_DATA_REG2);
+}
+
+/* determine, if gpio number is valid */
+static inline int rdc321x_is_gpio(unsigned gpio)
+{
+	return gpio <= RDC321X_MAX_GPIO;
+}
+
+/* request GPIO */
+int rdc_gpio_request(unsigned gpio, const char *label)
 {
-	if (rdc_gpio_is_valid(gpio))
-		return (int)rdc_gpio_read(gpio);
-	else
+	unsigned long flags;
+
+	if (!rdc321x_is_gpio(gpio))
 		return -EINVAL;
+
+	spin_lock_irqsave(&gpio_lock, flags);
+	if (gpio_request_data[(gpio & 0x20) ? 1 : 0] & (1 << (gpio & 0x1f)))
+		goto inuse;
+	gpio_request_data[(gpio & 0x20) ? 1 : 0] |= (1 << (gpio & 0x1f));
+	spin_unlock_irqrestore(&gpio_lock, flags);
+
+	return 0;
+inuse:
+	spin_unlock_irqrestore(&gpio_lock, flags);
+	return -EINVAL;
 }
-EXPORT_SYMBOL(rdc_gpio_get_value);
+EXPORT_SYMBOL(rdc_gpio_request);
 
-void rdc_gpio_set_value(unsigned gpio, int value)
+/* release previously-claimed GPIO */
+void rdc_gpio_free(unsigned gpio)
 {
-	unsigned int val;
+	unsigned long flags;
 
-	if (!rdc_gpio_is_valid(gpio))
+	if (!rdc321x_is_gpio(gpio))
 		return;
 
-	val = rdc_gpio_read(gpio);
+	spin_lock_irqsave(&gpio_lock, flags);
+	gpio_request_data[(gpio & 0x20) ? 1 : 0] &= ~(1 << (gpio & 0x1f));
+	spin_unlock_irqrestore(&gpio_lock, flags);
+}
+EXPORT_SYMBOL(rdc_gpio_free);
+
+/* read GPIO pin */
+int rdc_gpio_get_value(unsigned gpio)
+{
+	u32 reg;
+	unsigned long flags;
+
+	spin_lock_irqsave(&gpio_lock, flags);
+	reg = rdc321x_conf_read(gpio < 32
+		? RDC321X_GPIO_DATA_REG1 : RDC321X_GPIO_DATA_REG2);
+	spin_unlock_irqrestore(&gpio_lock, flags);
 
-	if (value)
-		val &= ~(0x1 << (gpio & 0x1F));
-	else
-		val |= (0x1 << (gpio & 0x1F));
+	return (1 << (gpio & 0x1f)) & reg ? 1 : 0;
+}
+EXPORT_SYMBOL(rdc_gpio_get_value);
 
-	rdc_gpio_write(val);
+/* set GPIO pin to value */
+void rdc_gpio_set_value(unsigned gpio, int value)
+{
+	unsigned long flags;
+	u32 reg;
+
+	reg = 1 << (gpio & 0x1f);
+	if (gpio < 32) {
+		spin_lock_irqsave(&gpio_lock, flags);
+		if (value)
+			gpio_data_reg1 |= reg;
+		else
+			gpio_data_reg1 &= ~reg;
+		rdc321x_conf_write(RDC321X_GPIO_DATA_REG1, gpio_data_reg1);
+		spin_unlock_irqrestore(&gpio_lock, flags);
+	} else {
+		spin_lock_irqsave(&gpio_lock, flags);
+		if (value)
+			gpio_data_reg2 |= reg;
+		else
+			gpio_data_reg2 &= ~reg;
+		rdc321x_conf_write(RDC321X_GPIO_DATA_REG2, gpio_data_reg2);
+		spin_unlock_irqrestore(&gpio_lock, flags);
+	}
 }
 EXPORT_SYMBOL(rdc_gpio_set_value);
 
+/* configure GPIO pin as input */
 int rdc_gpio_direction_input(unsigned gpio)
 {
+	if (!rdc321x_is_gpio(gpio))
+		return -EINVAL;
+
+	rdc321x_configure_gpio(gpio);
+
 	return 0;
 }
 EXPORT_SYMBOL(rdc_gpio_direction_input);
 
+/* configure GPIO pin as output and set value */
 int rdc_gpio_direction_output(unsigned gpio, int value)
 {
+	if (!rdc321x_is_gpio(gpio))
+		return -EINVAL;
+
+	gpio_set_value(gpio, value);
+	rdc321x_configure_gpio(gpio);
+
 	return 0;
 }
 EXPORT_SYMBOL(rdc_gpio_direction_output);
-
-
diff --git a/arch/x86/mach-rdc321x/platform.c b/arch/x86/mach-rdc321x/platform.c
index dda6024..a037041 100644
--- a/arch/x86/mach-rdc321x/platform.c
+++ b/arch/x86/mach-rdc321x/platform.c
@@ -62,6 +62,8 @@ static struct platform_device *rdc321x_devs[] = {
 
 static int __init rdc_board_setup(void)
 {
+	rdc321x_gpio_setup();
+
 	return platform_add_devices(rdc321x_devs, ARRAY_SIZE(rdc321x_devs));
 }
 
diff --git a/arch/x86/mm/discontig_32.c b/arch/x86/mm/discontig_32.c
index c394ca0..8e25e06 100644
--- a/arch/x86/mm/discontig_32.c
+++ b/arch/x86/mm/discontig_32.c
@@ -324,7 +324,6 @@ unsigned long __init setup_memory(void)
 	 * this space and use it to adjust the boundary between ZONE_NORMAL
 	 * and ZONE_HIGHMEM.
 	 */
-	find_max_pfn();
 	get_memcfg_numa();
 
 	kva_pages = calculate_numa_remap_pages();
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index fdc6674..ec08d83 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -91,12 +91,10 @@ static int is_prefetch(struct pt_regs *regs, unsigned long addr,
 	int prefetch = 0;
 	unsigned char *max_instr;
 
-#ifdef CONFIG_X86_32
-	if (!(__supported_pte_mask & _PAGE_NX))
-		return 0;
-#endif
-
-	/* If it was a exec fault on NX page, ignore */
+	/*
+	 * If it was a exec (instruction fetch) fault on NX page, then
+	 * do not ignore the fault:
+	 */
 	if (error_code & PF_INSTR)
 		return 0;
 
diff --git a/arch/x86/mm/highmem_32.c b/arch/x86/mm/highmem_32.c
index 3d936f2..9cf33d3 100644
--- a/arch/x86/mm/highmem_32.c
+++ b/arch/x86/mm/highmem_32.c
@@ -73,15 +73,15 @@ void *kmap_atomic_prot(struct page *page, enum km_type type, pgprot_t prot)
 {
 	enum fixed_addresses idx;
 	unsigned long vaddr;
-	/* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */
-
-	debug_kmap_atomic_prot(type);
 
+	/* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */
 	pagefault_disable();
 
 	if (!PageHighMem(page))
 		return page_address(page);
 
+	debug_kmap_atomic_prot(type);
+
 	idx = type + KM_TYPE_NR*smp_processor_id();
 	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
 	BUG_ON(!pte_none(*(kmap_pte-idx)));
diff --git a/arch/x86/mm/hugetlbpage.c b/arch/x86/mm/hugetlbpage.c
index 4fbafb4..0b3d567 100644
--- a/arch/x86/mm/hugetlbpage.c
+++ b/arch/x86/mm/hugetlbpage.c
@@ -178,7 +178,7 @@ follow_huge_addr(struct mm_struct *mm, unsigned long address, int write)
 
 	page = &pte_page(*pte)[vpfn % (HPAGE_SIZE/PAGE_SIZE)];
 
-	WARN_ON(!PageCompound(page));
+	WARN_ON(!PageHead(page));
 
 	return page;
 }
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index 4afaba0..794895c 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -137,7 +137,11 @@ static void __iomem *__ioremap(resource_size_t phys_addr, unsigned long size,
 	switch (mode) {
 	case IOR_MODE_UNCACHED:
 	default:
-		prot = PAGE_KERNEL_NOCACHE;
+		/*
+		 * FIXME: we will use UC MINUS for now, as video fb drivers
+		 * depend on it. Upcoming ioremap_wc() will fix this behavior.
+		 */
+		prot = PAGE_KERNEL_UC_MINUS;
 		break;
 	case IOR_MODE_CACHED:
 		prot = PAGE_KERNEL;
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 14e48b5..7b79f6b 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -771,7 +771,7 @@ static inline int change_page_attr_clear(unsigned long addr, int numpages,
 int set_memory_uc(unsigned long addr, int numpages)
 {
 	return change_page_attr_set(addr, numpages,
-				    __pgprot(_PAGE_PCD | _PAGE_PWT));
+				    __pgprot(_PAGE_PCD));
 }
 EXPORT_SYMBOL(set_memory_uc);
 
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 8b9ee27..27ee26a 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -95,7 +95,7 @@ struct shared_info *HYPERVISOR_shared_info = (void *)&dummy_shared_info;
  *
  * 0: not available, 1: available
  */
-static int have_vcpu_info_placement = 0;
+static int have_vcpu_info_placement = 1;
 
 static void __init xen_vcpu_setup(int cpu)
 {
@@ -103,6 +103,7 @@ static void __init xen_vcpu_setup(int cpu)
 	int err;
 	struct vcpu_info *vcpup;
 
+	BUG_ON(HYPERVISOR_shared_info == &dummy_shared_info);
 	per_cpu(xen_vcpu, cpu) = &HYPERVISOR_shared_info->vcpu_info[cpu];
 
 	if (!have_vcpu_info_placement)
@@ -666,10 +667,10 @@ static void xen_release_pt_init(u32 pfn)
 	make_lowmem_page_readwrite(__va(PFN_PHYS(pfn)));
 }
 
-static void pin_pagetable_pfn(unsigned level, unsigned long pfn)
+static void pin_pagetable_pfn(unsigned cmd, unsigned long pfn)
 {
 	struct mmuext_op op;
-	op.cmd = level;
+	op.cmd = cmd;
 	op.arg1.mfn = pfn_to_mfn(pfn);
 	if (HYPERVISOR_mmuext_op(&op, 1, NULL, DOMID_SELF))
 		BUG();
@@ -686,7 +687,8 @@ static void xen_alloc_ptpage(struct mm_struct *mm, u32 pfn, unsigned level)
 
 		if (!PageHighMem(page)) {
 			make_lowmem_page_readonly(__va(PFN_PHYS(pfn)));
-			pin_pagetable_pfn(level, pfn);
+			if (level == PT_PTE)
+				pin_pagetable_pfn(MMUEXT_PIN_L1_TABLE, pfn);
 		} else
 			/* make sure there are no stray mappings of
 			   this page */
@@ -696,27 +698,39 @@ static void xen_alloc_ptpage(struct mm_struct *mm, u32 pfn, unsigned level)
 
 static void xen_alloc_pt(struct mm_struct *mm, u32 pfn)
 {
-	xen_alloc_ptpage(mm, pfn, MMUEXT_PIN_L1_TABLE);
+	xen_alloc_ptpage(mm, pfn, PT_PTE);
 }
 
 static void xen_alloc_pd(struct mm_struct *mm, u32 pfn)
 {
-	xen_alloc_ptpage(mm, pfn, MMUEXT_PIN_L2_TABLE);
+	xen_alloc_ptpage(mm, pfn, PT_PMD);
 }
 
 /* This should never happen until we're OK to use struct page */
-static void xen_release_pt(u32 pfn)
+static void xen_release_ptpage(u32 pfn, unsigned level)
 {
 	struct page *page = pfn_to_page(pfn);
 
 	if (PagePinned(page)) {
 		if (!PageHighMem(page)) {
-			pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, pfn);
+			if (level == PT_PTE)
+				pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, pfn);
 			make_lowmem_page_readwrite(__va(PFN_PHYS(pfn)));
 		}
+		ClearPagePinned(page);
 	}
 }
 
+static void xen_release_pt(u32 pfn)
+{
+	xen_release_ptpage(pfn, PT_PTE);
+}
+
+static void xen_release_pd(u32 pfn)
+{
+	xen_release_ptpage(pfn, PT_PMD);
+}
+
 #ifdef CONFIG_HIGHPTE
 static void *xen_kmap_atomic_pte(struct page *page, enum km_type type)
 {
@@ -805,33 +819,43 @@ static __init void xen_pagetable_setup_start(pgd_t *base)
 			  PFN_DOWN(__pa(xen_start_info->pt_base)));
 }
 
-static __init void xen_pagetable_setup_done(pgd_t *base)
+static __init void setup_shared_info(void)
 {
-	/* This will work as long as patching hasn't happened yet
-	   (which it hasn't) */
-	pv_mmu_ops.alloc_pt = xen_alloc_pt;
-	pv_mmu_ops.alloc_pd = xen_alloc_pd;
-	pv_mmu_ops.release_pt = xen_release_pt;
-	pv_mmu_ops.release_pd = xen_release_pt;
-	pv_mmu_ops.set_pte = xen_set_pte;
-
 	if (!xen_feature(XENFEAT_auto_translated_physmap)) {
+		unsigned long addr = fix_to_virt(FIX_PARAVIRT_BOOTMAP);
+
 		/*
 		 * Create a mapping for the shared info page.
 		 * Should be set_fixmap(), but shared_info is a machine
 		 * address with no corresponding pseudo-phys address.
 		 */
-		set_pte_mfn(fix_to_virt(FIX_PARAVIRT_BOOTMAP),
+		set_pte_mfn(addr,
 			    PFN_DOWN(xen_start_info->shared_info),
 			    PAGE_KERNEL);
 
-		HYPERVISOR_shared_info =
-			(struct shared_info *)fix_to_virt(FIX_PARAVIRT_BOOTMAP);
-
+		HYPERVISOR_shared_info = (struct shared_info *)addr;
 	} else
 		HYPERVISOR_shared_info =
 			(struct shared_info *)__va(xen_start_info->shared_info);
 
+#ifndef CONFIG_SMP
+	/* In UP this is as good a place as any to set up shared info */
+	xen_setup_vcpu_info_placement();
+#endif
+}
+
+static __init void xen_pagetable_setup_done(pgd_t *base)
+{
+	/* This will work as long as patching hasn't happened yet
+	   (which it hasn't) */
+	pv_mmu_ops.alloc_pt = xen_alloc_pt;
+	pv_mmu_ops.alloc_pd = xen_alloc_pd;
+	pv_mmu_ops.release_pt = xen_release_pt;
+	pv_mmu_ops.release_pd = xen_release_pd;
+	pv_mmu_ops.set_pte = xen_set_pte;
+
+	setup_shared_info();
+
 	/* Actually pin the pagetable down, but we can't set PG_pinned
 	   yet because the page structures don't exist yet. */
 	{
@@ -1182,15 +1206,9 @@ asmlinkage void __init xen_start_kernel(void)
 	x86_write_percpu(xen_cr3, __pa(pgd));
 	x86_write_percpu(xen_current_cr3, __pa(pgd));
 
-#ifdef CONFIG_SMP
 	/* Don't do the full vcpu_info placement stuff until we have a
-	   possible map. */
+	   possible map and a non-dummy shared_info. */
 	per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0];
-#else
-	/* May as well do it now, since there's no good time to call
-	   it later on UP. */
-	xen_setup_vcpu_info_placement();
-#endif
 
 	pv_info.kernel_rpl = 1;
 	if (xen_feature(XENFEAT_supervisor_mode_kernel))
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index 0144395..2a054ef 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -310,13 +310,6 @@ pgd_t xen_make_pgd(unsigned long pgd)
 }
 #endif	/* CONFIG_X86_PAE */
 
-enum pt_level {
-	PT_PGD,
-	PT_PUD,
-	PT_PMD,
-	PT_PTE
-};
-
 /*
   (Yet another) pagetable walker.  This one is intended for pinning a
   pagetable.  This means that it walks a pagetable and calls the
diff --git a/arch/x86/xen/mmu.h b/arch/x86/xen/mmu.h
index c9ff27f..b5e189b 100644
--- a/arch/x86/xen/mmu.h
+++ b/arch/x86/xen/mmu.h
@@ -3,6 +3,13 @@
 #include <linux/linkage.h>
 #include <asm/page.h>
 
+enum pt_level {
+	PT_PGD,
+	PT_PUD,
+	PT_PMD,
+	PT_PTE
+};
+
 /*
  * Page-directory addresses above 4GB do not fit into architectural %cr3.
  * When accessing %cr3, or equivalent field in vcpu_guest_context, guests
diff --git a/arch/x86/xen/xen-asm.S b/arch/x86/xen/xen-asm.S
index 1a43b60..6b71904 100644
--- a/arch/x86/xen/xen-asm.S
+++ b/arch/x86/xen/xen-asm.S
@@ -33,12 +33,17 @@
 	events, then enter the hypervisor to get them handled.
  */
 ENTRY(xen_irq_enable_direct)
-	/* Clear mask and test pending */
-	andw $0x00ff, PER_CPU_VAR(xen_vcpu_info)+XEN_vcpu_info_pending
+	/* Unmask events */
+	movb $0, PER_CPU_VAR(xen_vcpu_info)+XEN_vcpu_info_mask
+
 	/* Preempt here doesn't matter because that will deal with
 	   any pending interrupts.  The pending check may end up being
 	   run on the wrong CPU, but that doesn't hurt. */
+
+	/* Test for pending */
+	testb $0xff, PER_CPU_VAR(xen_vcpu_info)+XEN_vcpu_info_pending
 	jz 1f
+
 2:	call check_events
 1:
 ENDPATCH(xen_irq_enable_direct)