Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform changes from Arnd Bergmann:
 "New and updated SoC support, notable changes include:

   - bcm:
        brcmstb SMP support
        initial iproc/cygnus support
   - exynos:
        Exynos4415 SoC support
        PMU and suspend support for Exynos5420
        PMU support for Exynos3250
        pm related maintenance
   - imx:
        new LS1021A SoC support
        vybrid 610 global timer support
   - integrator:
        convert to using multiplatform configuration
   - mediatek:
        earlyprintk support for mt8127/mt8135
   - meson:
        meson8 soc and l2 cache controller support
   - mvebu:
        Armada 38x CPU hotplug support
        drop support for prerelease Armada 375 Z1 stepping
        extended suspend support, now works on Armada 370/XP
   - omap:
        hwmod related maintenance
        prcm cleanup
   - pxa:
        initial pxa27x DT handling
   - rockchip:
        SMP support for rk3288
        add cpu frequency scaling support
   - shmobile:
        r8a7740 power domain support
        various small restart, timer, pci apmu changes
   - sunxi:
        Allwinner A80 (sun9i) earlyprintk support
   - ux500:
        power domain support

  Overall, a significant chunk of changes, coming mostly from the usual
  suspects: omap, shmobile, samsung and mvebu, all of which already
  contain a lot of platform specific code in arch/arm"

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (187 commits)
  ARM: mvebu: use the cpufreq-dt platform_data for independent clocks
  soc: integrator: Add terminating entry for integrator_cm_match
  ARM: mvebu: add SDRAM controller description for Armada XP
  ARM: mvebu: adjust mbus controller description on Armada 370/XP
  ARM: mvebu: add suspend/resume DT information for Armada XP GP
  ARM: mvebu: synchronize secondary CPU clocks on resume
  ARM: mvebu: make sure MMU is disabled in armada_370_xp_cpu_resume
  ARM: mvebu: Armada XP GP specific suspend/resume code
  ARM: mvebu: reserve the first 10 KB of each memory bank for suspend/resume
  ARM: mvebu: implement suspend/resume support for Armada XP
  clk: mvebu: add suspend/resume for gatable clocks
  bus: mvebu-mbus: provide a mechanism to save SDRAM window configuration
  bus: mvebu-mbus: suspend/resume support
  clocksource: time-armada-370-xp: add suspend/resume support
  irqchip: armada-370-xp: Add suspend/resume support
  ARM: add lolevel debug support for asm9260
  ARM: add mach-asm9260
  ARM: EXYNOS: use u8 for val[] in struct exynos_pmu_conf
  power: reset: imx-snvs-poweroff: add power off driver for i.mx6
  ARM: imx: temporarily remove CONFIG_SOC_FSL from LS1021A
  ...

182 files changed, 5302 insertions, 2303 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index fd4515c..8db9dc0 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -320,24 +320,6 @@ config ARCH_MULTIPLATFORM
 	select SPARSE_IRQ
 	select USE_OF
 
-config ARCH_INTEGRATOR
-	bool "ARM Ltd. Integrator family"
-	select ARM_AMBA
-	select ARM_PATCH_PHYS_VIRT if MMU
-	select AUTO_ZRELADDR
-	select COMMON_CLK
-	select COMMON_CLK_VERSATILE
-	select GENERIC_CLOCKEVENTS
-	select HAVE_TCM
-	select ICST
-	select MULTI_IRQ_HANDLER
-	select PLAT_VERSATILE
-	select SPARSE_IRQ
-	select USE_OF
-	select VERSATILE_FPGA_IRQ
-	help
-	  Support for ARM's Integrator platform.
-
 config ARCH_REALVIEW
 	bool "ARM Ltd. RealView family"
 	select ARCH_WANT_OPTIONAL_GPIOLIB
@@ -857,6 +839,8 @@ config ARCH_VIRT
 #
 source "arch/arm/mach-mvebu/Kconfig"
 
+source "arch/arm/mach-asm9260/Kconfig"
+
 source "arch/arm/mach-at91/Kconfig"
 
 source "arch/arm/mach-axxia/Kconfig"
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index d8f6a2e..f9295a4 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -93,6 +93,27 @@ choice
 	prompt "Kernel low-level debugging port"
 	depends on DEBUG_LL
 
+	config DEBUG_ASM9260_UART
+		bool "Kernel low-level debugging via asm9260 UART"
+		depends on MACH_ASM9260
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to an UART or USART port on asm9260 based
+		  machines.
+
+		    DEBUG_UART_PHYS | DEBUG_UART_VIRT
+
+		    0x80000000      | 0xf0000000     | UART0
+		    0x80004000      | 0xf0004000     | UART1
+		    0x80008000      | 0xf0008000     | UART2
+		    0x8000c000      | 0xf000c000     | UART3
+		    0x80010000      | 0xf0010000     | UART4
+		    0x80014000      | 0xf0014000     | UART5
+		    0x80018000      | 0xf0018000     | UART6
+		    0x8001c000      | 0xf001c000     | UART7
+		    0x80020000      | 0xf0020000     | UART8
+		    0x80024000      | 0xf0024000     | UART9
+
 	config AT91_DEBUG_LL_DBGU0
 		bool "Kernel low-level debugging on rm9200, 9260/9g20, 9261/9g10 and 9rl"
 		depends on HAVE_AT91_DBGU0
@@ -113,7 +134,7 @@ choice
 	config DEBUG_BCM_5301X
 		bool "Kernel low-level debugging on BCM5301X UART1"
 		depends on ARCH_BCM_5301X
-		select DEBUG_UART_PL01X
+		select DEBUG_UART_8250
 
 	config DEBUG_BCM_KONA_UART
 		bool "Kernel low-level debugging messages via BCM KONA UART"
@@ -139,6 +160,17 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on Marvell Berlin SoC based platforms.
 
+	config DEBUG_BRCMSTB_UART
+		bool "Use BRCMSTB UART for low-level debug"
+		depends on ARCH_BRCMSTB
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the first serial port on these devices.
+
+		  If you have a Broadcom STB chip and would like early print
+		  messages to appear over the UART, select this option.
+
 	config DEBUG_CLPS711X_UART1
 		bool "Kernel low-level debugging messages via UART1"
 		depends on ARCH_CLPS711X
@@ -653,6 +685,64 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on Rockchip RK32xx based platforms.
 
+	config DEBUG_R7S72100_SCIF2
+		bool "Kernel low-level debugging messages via SCIF2 on R7S72100"
+		depends on ARCH_R7S72100
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  via SCIF2 on Renesas RZ/A1H (R7S72100).
+
+	config DEBUG_RCAR_GEN1_SCIF0
+		bool "Kernel low-level debugging messages via SCIF0 on R8A7778"
+		depends on ARCH_R8A7778
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  via SCIF0 on Renesas R-Car M1A (R8A7778).
+
+	config DEBUG_RCAR_GEN1_SCIF2
+		bool "Kernel low-level debugging messages via SCIF2 on R8A7779"
+		depends on ARCH_R8A7779
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  via SCIF2 on Renesas R-Car H1 (R8A7779).
+
+	config DEBUG_RCAR_GEN2_SCIF0
+		bool "Kernel low-level debugging messages via SCIF0 on R8A7790/R8A7791/R8A7793)"
+		depends on ARCH_R8A7790 || ARCH_R8A7791 || ARCH_R8A7793
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  via SCIF0 on Renesas R-Car H2 (R8A7790), M2-W (R8A7791), or
+		  M2-N (R8A7793).
+
+	config DEBUG_RCAR_GEN2_SCIF2
+		bool "Kernel low-level debugging messages via SCIF2 on R8A7794"
+		depends on ARCH_R8A7794
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  via SCIF2 on Renesas R-Car E2 (R8A7794).
+
+	config DEBUG_RMOBILE_SCIFA0
+		bool "Kernel low-level debugging messages via SCIFA0 on R8A73A4/SH7372"
+		depends on ARCH_R8A73A4 || ARCH_SH7372
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  via SCIFA0 on Renesas R-Mobile APE6 (R8A73A4) or SH-Mobile
+		  AP4 (SH7372).
+
+	config DEBUG_RMOBILE_SCIFA1
+		bool "Kernel low-level debugging messages via SCIFA1 on R8A7740"
+		depends on ARCH_R8A7740
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  via SCIFA1 on Renesas R-Mobile A1 (R8A7740).
+
+	config DEBUG_RMOBILE_SCIFA4
+		bool "Kernel low-level debugging messages via SCIFA4 on SH73A0"
+		depends on ARCH_SH73A0
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  via SCIFA4 on Renesas SH-Mobile AG5 (SH73A0).
+
 	config DEBUG_S3C_UART0
 		depends on PLAT_SAMSUNG
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
@@ -723,6 +813,14 @@ choice
 		  their output to UART 2. The port must have been initialised
 		  by the boot-loader before use.
 
+	config DEBUG_SA1100
+		depends on ARCH_SA1100
+		bool "Use SA1100 UARTs for low-level debug"
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on SA-11x0 UART ports. The kernel will check for the first
+		  enabled UART in a sequence 3-1-2.
+
 	config DEBUG_SOCFPGA_UART
 		depends on ARCH_SOCFPGA
 		bool "Use SOCFPGA UART for low-level debug"
@@ -731,6 +829,14 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on SOCFPGA based platforms.
 
+	config DEBUG_SUN9I_UART0
+		bool "Kernel low-level debugging messages via sun9i UART0"
+		depends on MACH_SUN9I
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on Allwinner A80 based platforms on the UART0.
+
 	config DEBUG_SUNXI_UART0
 		bool "Kernel low-level debugging messages via sunXi UART0"
 		depends on ARCH_SUNXI
@@ -866,6 +972,22 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  for Mediatek mt6589 based platforms on UART0.
 
+	config DEBUG_MT8127_UART0
+		bool "Mediatek mt8127 UART0"
+		depends on ARCH_MEDIATEK
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  for Mediatek mt8127 based platforms on UART0.
+
+	config DEBUG_MT8135_UART3
+		bool "Mediatek mt8135 UART3"
+		depends on ARCH_MEDIATEK
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  for Mediatek mt8135 based platforms on UART3.
+
 	config DEBUG_VEXPRESS_UART0_DETECT
 		bool "Autodetect UART0 on Versatile Express Cortex-A core tiles"
 		depends on ARCH_VEXPRESS && CPU_CP15_MMU
@@ -1041,7 +1163,9 @@ config DEBUG_STI_UART
 
 config DEBUG_LL_INCLUDE
 	string
+	default "debug/sa1100.S" if DEBUG_SA1100
 	default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250
+	default "debug/asm9260.S" if DEBUG_ASM9260_UART
 	default "debug/clps711x.S" if DEBUG_CLPS711X_UART1 || DEBUG_CLPS711X_UART2
 	default "debug/meson.S" if DEBUG_MESON_UARTAO
 	default "debug/pl01x.S" if DEBUG_LL_UART_PL01X || DEBUG_UART_PL01X
@@ -1061,6 +1185,14 @@ config DEBUG_LL_INCLUDE
 				 DEBUG_IMX6SX_UART
 	default "debug/msm.S" if DEBUG_MSM_UART || DEBUG_QCOM_UARTDM
 	default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
+	default "debug/renesas-scif.S" if DEBUG_R7S72100_SCIF2
+	default "debug/renesas-scif.S" if DEBUG_RCAR_GEN1_SCIF0
+	default "debug/renesas-scif.S" if DEBUG_RCAR_GEN1_SCIF2
+	default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF0
+	default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF2
+	default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA0
+	default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA1
+	default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA4
 	default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART
 	default "debug/s5pv210.S" if DEBUG_S5PV210_UART
 	default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1
@@ -1106,6 +1238,7 @@ config DEBUG_UART_PHYS
 	default 0x02530c00 if DEBUG_KEYSTONE_UART0
 	default 0x02531000 if DEBUG_KEYSTONE_UART1
 	default 0x03010fe0 if ARCH_RPC
+	default 0x07000000 if DEBUG_SUN9I_UART0
 	default 0x10009000 if DEBUG_REALVIEW_STD_PORT || \
 				DEBUG_VEXPRESS_UART0_CA9
 	default 0x1010c000 if DEBUG_REALVIEW_PB1176_PORT
@@ -1113,7 +1246,9 @@ config DEBUG_UART_PHYS
 	default 0x10126000 if DEBUG_RK3X_UART1
 	default 0x101f1000 if ARCH_VERSATILE
 	default 0x101fb000 if DEBUG_NOMADIK_UART
+	default 0x11002000 if DEBUG_MT8127_UART0
 	default 0x11006000 if DEBUG_MT6589_UART0
+	default 0x11009000 if DEBUG_MT8135_UART3
 	default 0x16000000 if ARCH_INTEGRATOR
 	default 0x18000300 if DEBUG_BCM_5301X
 	default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1
@@ -1135,6 +1270,7 @@ config DEBUG_UART_PHYS
 	default 0x78000000 if DEBUG_CNS3XXX
 	default 0x7c0003f8 if FOOTBRIDGE
 	default 0x78000000 if DEBUG_CNS3XXX
+	default 0x80010000 if DEBUG_ASM9260_UART
 	default 0x80070000 if DEBUG_IMX23_UART
 	default 0x80074000 if DEBUG_IMX28_UART
 	default 0x80230000 if DEBUG_PICOXCELL_UART
@@ -1152,7 +1288,14 @@ config DEBUG_UART_PHYS
 	default 0xd4018000 if DEBUG_MMP_UART3
 	default 0xe0000000 if ARCH_SPEAR13XX
 	default 0xe4007000 if DEBUG_HIP04_UART
+	default 0xe6c40000 if DEBUG_RMOBILE_SCIFA0
+	default 0xe6c50000 if DEBUG_RMOBILE_SCIFA1
+	default 0xe6c80000 if DEBUG_RMOBILE_SCIFA4
+	default 0xe6e58000 if DEBUG_RCAR_GEN2_SCIF2
+	default 0xe6e60000 if DEBUG_RCAR_GEN2_SCIF0
+	default 0xe8008000 if DEBUG_R7S72100_SCIF2
 	default 0xf0000be0 if ARCH_EBSA110
+	default 0xf040ab00 if DEBUG_BRCMSTB_UART
 	default 0xf1012000 if DEBUG_MVEBU_UART_ALTERNATE
 	default 0xf1012000 if ARCH_DOVE || ARCH_MV78XX0 || \
 				ARCH_ORION5X
@@ -1164,24 +1307,33 @@ config DEBUG_UART_PHYS
 	default 0xff690000 if DEBUG_RK32_UART2
 	default 0xffc02000 if DEBUG_SOCFPGA_UART
 	default 0xffd82340 if ARCH_IOP13XX
+	default 0xffe40000 if DEBUG_RCAR_GEN1_SCIF0
+	default 0xffe42000 if DEBUG_RCAR_GEN1_SCIF2
 	default 0xfff36000 if DEBUG_HIGHBANK_UART
 	default 0xfffe8600 if DEBUG_UART_BCM63XX
 	default 0xfffff700 if ARCH_IOP33X
 	depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
 		DEBUG_LL_UART_EFM32 || \
 		DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
-		DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
-		DEBUG_UART_BCM63XX
+		DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_R7S72100_SCIF2 || \
+		DEBUG_RCAR_GEN1_SCIF0 || DEBUG_RCAR_GEN1_SCIF2 || \
+		DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF2 || \
+		DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \
+		DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \
+		DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART
 
 config DEBUG_UART_VIRT
 	hex "Virtual base address of debug UART"
 	default 0xe0010fe0 if ARCH_RPC
 	default 0xe1000000 if DEBUG_MSM_UART
 	default 0xf0000be0 if ARCH_EBSA110
+	default 0xf0010000 if DEBUG_ASM9260_UART
 	default 0xf01fb000 if DEBUG_NOMADIK_UART
 	default 0xf0201000 if DEBUG_BCM2835
 	default 0xf1000300 if DEBUG_BCM_5301X
+	default 0xf1002000 if DEBUG_MT8127_UART0
 	default 0xf1006000 if DEBUG_MT6589_UART0
+	default 0xf1009000 if DEBUG_MT8135_UART3
 	default 0xf11f1000 if ARCH_VERSATILE
 	default 0xf1600000 if ARCH_INTEGRATOR
 	default 0xf1c28000 if DEBUG_SUNXI_UART0
@@ -1190,6 +1342,7 @@ config DEBUG_UART_VIRT
 	default 0xf6200000 if DEBUG_PXA_UART1
 	default 0xf4090000 if ARCH_LPC32XX
 	default 0xf4200000 if ARCH_GEMINI
+	default 0xf7000000 if DEBUG_SUN9I_UART0
 	default 0xf7000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
 				DEBUG_S3C2410_UART0)
 	default 0xf7004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \
@@ -1204,6 +1357,7 @@ config DEBUG_UART_VIRT
 	default 0xfb002000 if DEBUG_CNS3XXX
 	default 0xfb009000 if DEBUG_REALVIEW_STD_PORT
 	default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
+	default 0xfc40ab00 if DEBUG_BRCMSTB_UART
 	default 0xfcfe8600 if DEBUG_UART_BCM63XX
 	default 0xfd000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX
 	default 0xfd000000 if ARCH_SPEAR13XX
@@ -1244,12 +1398,12 @@ config DEBUG_UART_VIRT
 	depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
 		DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
 		DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
-		DEBUG_UART_BCM63XX
+		DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART
 
 config DEBUG_UART_8250_SHIFT
 	int "Register offset shift for the 8250 debug UART"
 	depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
-	default 0 if FOOTBRIDGE || ARCH_IOP32X
+	default 0 if FOOTBRIDGE || ARCH_IOP32X || DEBUG_BCM_5301X
 	default 2
 
 config DEBUG_UART_8250_WORD
@@ -1260,7 +1414,8 @@ config DEBUG_UART_8250_WORD
 		ARCH_KEYSTONE || \
 		DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \
 		DEBUG_DAVINCI_DA8XX_UART2 || \
-		DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2
+		DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2 || \
+		DEBUG_BRCMSTB_UART
 
 config DEBUG_UART_8250_FLOW_CONTROL
 	bool "Enable flow control for 8250 UART"
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index 83286ec..90dba78 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -180,7 +180,8 @@
 
 			mbusc: mbus-controller@20000 {
 				compatible = "marvell,mbus-controller";
-				reg = <0x20000 0x100>, <0x20180 0x20>;
+				reg = <0x20000 0x100>, <0x20180 0x20>,
+				      <0x20250 0x8>;
 			};
 
 			mpic: interrupt-controller@20000 {
diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts
index 0478c55..ea86736 100644
--- a/arch/arm/boot/dts/armada-xp-gp.dts
+++ b/arch/arm/boot/dts/armada-xp-gp.dts
@@ -23,6 +23,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
 #include "armada-xp-mv78460.dtsi"
 
 / {
@@ -48,6 +49,14 @@
 		      <0x00000001 0x00000000 0x00000001 0x00000000>;
 	};
 
+	cpus {
+		pm_pic {
+			ctrl-gpios = <&gpio0 16 GPIO_ACTIVE_LOW>,
+				     <&gpio0 17 GPIO_ACTIVE_LOW>,
+				     <&gpio0 18 GPIO_ACTIVE_LOW>;
+		};
+	};
+
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
 			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
@@ -115,7 +124,15 @@
 			serial@12300 {
 				status = "okay";
 			};
-
+			pinctrl {
+				pinctrl-0 = <&pic_pins>;
+				pinctrl-names = "default";
+				pic_pins: pic-pins-0 {
+					marvell,pins = "mpp16", "mpp17",
+						       "mpp18";
+					marvell,function = "gpio";
+				};
+			};
 			sata@a0000 {
 				nr-ports = <2>;
 				status = "okay";
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index bff9f6c..2be244a 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -35,6 +35,11 @@
 		};
 
 		internal-regs {
+			sdramc@1400 {
+				compatible = "marvell,armada-xp-sdram-controller";
+				reg = <0x1400 0x500>;
+			};
+
 			L2: l2-cache {
 				compatible = "marvell,aurora-system-cache";
 				reg = <0x08000 0x1000>;
diff --git a/arch/arm/boot/dts/integrator.dtsi b/arch/arm/boot/dts/integrator.dtsi
index 88e3d477..28e38f8 100644
--- a/arch/arm/boot/dts/integrator.dtsi
+++ b/arch/arm/boot/dts/integrator.dtsi
@@ -6,8 +6,18 @@
 
 / {
 	core-module@10000000 {
-		compatible = "arm,core-module-integrator";
+		compatible = "arm,core-module-integrator", "syscon";
 		reg = <0x10000000 0x200>;
+
+		/* Use core module LED to indicate CPU load */
+		led@0c.0 {
+			compatible = "register-bit-led";
+			offset = <0x0c>;
+			mask = <0x01>;
+			label = "integrator:core_module";
+			linux,default-trigger = "cpu0";
+			default-state = "on";
+		};
 	};
 
 	ebi@12000000 {
@@ -82,5 +92,41 @@
 			reg = <0x19000000 0x1000>;
 			interrupts = <4>;
 		};
+
+		syscon {
+			/* Debug registers mapped as syscon */
+			compatible = "syscon";
+			reg = <0x1a000000 0x10>;
+
+			led@04.0 {
+				compatible = "register-bit-led";
+				offset = <0x04>;
+				mask = <0x01>;
+				label = "integrator:green0";
+				linux,default-trigger = "heartbeat";
+				default-state = "on";
+			};
+			led@04.1 {
+				compatible = "register-bit-led";
+				offset = <0x04>;
+				mask = <0x02>;
+				label = "integrator:yellow";
+				default-state = "off";
+			};
+			led@04.2 {
+				compatible = "register-bit-led";
+				offset = <0x04>;
+				mask = <0x04>;
+				label = "integrator:red";
+				default-state = "off";
+			};
+			led@04.3 {
+				compatible = "register-bit-led";
+				offset = <0x04>;
+				mask = <0x08>;
+				label = "integrator:green1";
+				default-state = "off";
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi
index 25ba083..3cbaf98 100644
--- a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi
+++ b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi
@@ -64,6 +64,7 @@
 
 #include "twl4030.dtsi"
 #include "twl4030_omap3.dtsi"
+#include <dt-bindings/input/input.h>
 
 &mmc1 {
 	vmmc-supply = <&vmmc1>;
@@ -75,6 +76,22 @@
 	ti,pullups = <0x000001>;
 };
 
+&twl_keypad {
+	linux,keymap = <
+				MATRIX_KEY(0x00, 0x01, KEY_A)
+				MATRIX_KEY(0x00, 0x02, KEY_B)
+				MATRIX_KEY(0x00, 0x03, KEY_LEFT)
+
+				MATRIX_KEY(0x01, 0x01, KEY_UP)
+				MATRIX_KEY(0x01, 0x02, KEY_ENTER)
+				MATRIX_KEY(0x01, 0x03, KEY_DOWN)
+
+				MATRIX_KEY(0x02, 0x01, KEY_RIGHT)
+				MATRIX_KEY(0x02, 0x02, KEY_C)
+				MATRIX_KEY(0x02, 0x03, KEY_D)
+			>;
+};
+
 &hsusb1_phy {
 	reset-gpios = <&twl_gpio 6 GPIO_ACTIVE_LOW>;
 };
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 878c979..84045a5 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -895,7 +895,7 @@
 				reg = <0x58002000 0x1000>;
 				status = "disabled";
 				ti,hwmods = "dss_rfbi";
-				clocks = <&dss_dss_clk>, <&dss_fck>;
+				clocks = <&dss_dss_clk>, <&l3_div_ck>;
 				clock-names = "fck", "ick";
 			};
 
diff --git a/arch/arm/boot/dts/omap44xx-clocks.dtsi b/arch/arm/boot/dts/omap44xx-clocks.dtsi
index c821ff5..f2c48f0 100644
--- a/arch/arm/boot/dts/omap44xx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap44xx-clocks.dtsi
@@ -1018,14 +1018,6 @@
 		reg = <0x1120>;
 	};
 
-	dss_fck: dss_fck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l3_div_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x1120>;
-	};
-
 	fdif_fck: fdif_fck {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index 9d23230..bfd3f1c 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -11,6 +11,7 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/mfd/dbx500-prcmu.h>
+#include <dt-bindings/arm/ux500_pm_domains.h>
 #include "skeleton.dtsi"
 
 / {
@@ -43,6 +44,10 @@
 			interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		pm_domains: pm_domains0 {
+			compatible = "stericsson,ux500-pm-domains";
+			#power-domain-cells = <1>;
+		};
 
 		clocks {
 			compatible = "stericsson,u8500-clks";
@@ -636,6 +641,7 @@
 			clock-frequency = <400000>;
 			clocks = <&prcc_kclk 3 3>, <&prcc_pclk 3 3>;
 			clock-names = "i2cclk", "apb_pclk";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
 		};
 
 		i2c@80122000 {
@@ -651,6 +657,7 @@
 
 			clocks = <&prcc_kclk 1 2>, <&prcc_pclk 1 2>;
 			clock-names = "i2cclk", "apb_pclk";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
 		};
 
 		i2c@80128000 {
@@ -666,6 +673,7 @@
 
 			clocks = <&prcc_kclk 1 6>, <&prcc_pclk 1 6>;
 			clock-names = "i2cclk", "apb_pclk";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
 		};
 
 		i2c@80110000 {
@@ -681,6 +689,7 @@
 
 			clocks = <&prcc_kclk 2 0>, <&prcc_pclk 2 0>;
 			clock-names = "i2cclk", "apb_pclk";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
 		};
 
 		i2c@8012a000 {
@@ -696,6 +705,7 @@
 
 			clocks = <&prcc_kclk 1 9>, <&prcc_pclk 1 10>;
 			clock-names = "i2cclk", "apb_pclk";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
 		};
 
 		ssp@80002000 {
@@ -709,6 +719,7 @@
 			dmas = <&dma 8 0 0x2>, /* Logical - DevToMem */
 			       <&dma 8 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
 		};
 
 		ssp@80003000 {
@@ -722,6 +733,7 @@
 			dmas = <&dma 9 0 0x2>, /* Logical - DevToMem */
 			       <&dma 9 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
 		};
 
 		spi@8011a000 {
@@ -736,6 +748,7 @@
 			dmas = <&dma 0 0 0x2>, /* Logical - DevToMem */
 			       <&dma 0 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
 		};
 
 		spi@80112000 {
@@ -750,6 +763,7 @@
 			dmas = <&dma 35 0 0x2>, /* Logical - DevToMem */
 			       <&dma 35 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
 		};
 
 		spi@80111000 {
@@ -764,6 +778,7 @@
 			dmas = <&dma 33 0 0x2>, /* Logical - DevToMem */
 			       <&dma 33 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
 		};
 
 		spi@80129000 {
@@ -778,6 +793,7 @@
 			dmas = <&dma 40 0 0x2>, /* Logical - DevToMem */
 			       <&dma 40 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
 		};
 
 		uart@80120000 {
@@ -836,6 +852,7 @@
 
 			clocks = <&prcc_kclk 1 5>, <&prcc_pclk 1 5>;
 			clock-names = "sdi", "apb_pclk";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
 
 			status = "disabled";
 		};
@@ -851,6 +868,7 @@
 
 			clocks = <&prcc_kclk 2 4>, <&prcc_pclk 2 6>;
 			clock-names = "sdi", "apb_pclk";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
 
 			status = "disabled";
 		};
@@ -866,6 +884,7 @@
 
 			clocks = <&prcc_kclk 3 4>, <&prcc_pclk 3 4>;
 			clock-names = "sdi", "apb_pclk";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
 
 			status = "disabled";
 		};
@@ -881,6 +900,7 @@
 
 			clocks = <&prcc_kclk 2 5>, <&prcc_pclk 2 7>;
 			clock-names = "sdi", "apb_pclk";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
 
 			status = "disabled";
 		};
@@ -896,6 +916,7 @@
 
 			clocks = <&prcc_kclk 2 2>, <&prcc_pclk 2 4>;
 			clock-names = "sdi", "apb_pclk";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
 
 			status = "disabled";
 		};
@@ -911,6 +932,7 @@
 
 			clocks = <&prcc_kclk 3 7>, <&prcc_pclk 3 7>;
 			clock-names = "sdi", "apb_pclk";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
 
 			status = "disabled";
 		};
diff --git a/arch/arm/configs/bcm_defconfig b/arch/arm/configs/bcm_defconfig
index bc614f4..83a87e4 100644
--- a/arch/arm/configs/bcm_defconfig
+++ b/arch/arm/configs/bcm_defconfig
@@ -25,7 +25,8 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_ARCH_BCM=y
-CONFIG_ARCH_BCM_MOBILE=y
+CONFIG_ARCH_BCM_21664=y
+CONFIG_ARCH_BCM_281XX=y
 CONFIG_ARM_THUMBEE=y
 CONFIG_SMP=y
 CONFIG_PREEMPT=y
diff --git a/arch/arm/configs/integrator_defconfig b/arch/arm/configs/integrator_defconfig
index c1f5adc..71f1467 100644
--- a/arch/arm/configs/integrator_defconfig
+++ b/arch/arm/configs/integrator_defconfig
@@ -8,6 +8,9 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_PARTITION_ADVANCED=y
+CONFIG_ARCH_MULTI_V4T=y
+CONFIG_ARCH_MULTI_V5=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_INTEGRATOR=y
 CONFIG_ARCH_INTEGRATOR_AP=y
 CONFIG_ARCH_INTEGRATOR_CP=y
diff --git a/arch/arm/include/asm/firmware.h b/arch/arm/include/asm/firmware.h
index 2c9f10d..89aefe1 100644
--- a/arch/arm/include/asm/firmware.h
+++ b/arch/arm/include/asm/firmware.h
@@ -28,7 +28,7 @@ struct firmware_ops {
 	/*
 	 * Enters CPU idle mode
 	 */
-	int (*do_idle)(void);
+	int (*do_idle)(unsigned long mode);
 	/*
 	 * Sets boot address of specified physical CPU
 	 */
@@ -41,6 +41,14 @@ struct firmware_ops {
 	 * Initializes L2 cache
 	 */
 	int (*l2x0_init)(void);
+	/*
+	 * Enter system-wide suspend.
+	 */
+	int (*suspend)(void);
+	/*
+	 * Restore state of privileged hardware after system-wide suspend.
+	 */
+	int (*resume)(void);
 };
 
 /* Global pointer for current firmware_ops structure, can't be NULL. */
diff --git a/arch/arm/include/debug/asm9260.S b/arch/arm/include/debug/asm9260.S
new file mode 100644
index 0000000..292f85b
--- /dev/null
+++ b/arch/arm/include/debug/asm9260.S
@@ -0,0 +1,29 @@
+/* Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *  Modified for ASM9260 by Oleksij Remepl <linux@rempel-privat.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+		.macro	addruart, rp, rv, tmp
+		ldr	\rp, = CONFIG_DEBUG_UART_PHYS
+		ldr	\rv, = CONFIG_DEBUG_UART_VIRT
+		.endm
+
+		.macro	waituart,rd,rx
+		.endm
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #0x50]	@ TXDATA
+		.endm
+
+		.macro	busyuart,rd,rx
+1002:		ldr	\rd, [\rx, #0x60]	@ STAT
+		tst	\rd, #1 << 27		@ TXEMPTY
+		beq	1002b			@ wait until transmit done
+		.endm
diff --git a/arch/arm/include/debug/renesas-scif.S b/arch/arm/include/debug/renesas-scif.S
new file mode 100644
index 0000000..97820a8
--- /dev/null
+++ b/arch/arm/include/debug/renesas-scif.S
@@ -0,0 +1,52 @@
+/*
+ * Renesas SCIF(A) debugging macro include header
+ *
+ * Based on r8a7790.S
+ *
+ * Copyright (C) 2012-2013 Renesas Electronics Corporation
+ * Copyright (C) 1994-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define SCIF_PHYS	CONFIG_DEBUG_UART_PHYS
+#define SCIF_VIRT	((SCIF_PHYS & 0x00ffffff) | 0xfd000000)
+
+#if CONFIG_DEBUG_UART_PHYS < 0xe6e00000
+/* SCIFA */
+#define FTDR		0x20
+#define FSR		0x14
+#else
+/* SCIF */
+#define FTDR		0x0c
+#define FSR		0x10
+#endif
+
+#define TDFE	(1 << 5)
+#define TEND	(1 << 6)
+
+	.macro	addruart, rp, rv, tmp
+	ldr	\rp, =SCIF_PHYS
+	ldr	\rv, =SCIF_VIRT
+	.endm
+
+	.macro	waituart, rd, rx
+1001:	ldrh	\rd, [\rx, #FSR]
+	tst	\rd, #TDFE
+	beq	1001b
+	.endm
+
+	.macro	senduart, rd, rx
+	strb	\rd, [\rx, #FTDR]
+	ldrh	\rd, [\rx, #FSR]
+	bic	\rd, \rd, #TEND
+	strh	\rd, [\rx, #FSR]
+	.endm
+
+	.macro	busyuart, rd, rx
+1001:	ldrh	\rd, [\rx, #FSR]
+	tst	\rd, #TEND
+	beq	1001b
+	.endm
diff --git a/arch/arm/mach-sa1100/include/mach/debug-macro.S b/arch/arm/include/debug/sa1100.S
index 530772d..a0ae4f4 100644
--- a/arch/arm/mach-sa1100/include/mach/debug-macro.S
+++ b/arch/arm/include/debug/sa1100.S
@@ -1,4 +1,4 @@
-/* arch/arm/mach-sa1100/include/mach/debug-macro.S
+/* arch/arm/include/debug/sa1100.S
  *
  * Debugging macro include header
  *
@@ -10,7 +10,13 @@
  * published by the Free Software Foundation.
  *
 */
-#include <mach/hardware.h>
+
+#define UTCR3		0x0c
+#define UTDR		0x14
+#define UTSR1		0x20
+#define UTCR3_TXE	0x00000002	/* Transmit Enable                 */
+#define UTSR1_TBY	0x00000001	/* Transmitter BusY (read)         */
+#define UTSR1_TNF	0x00000004	/* Transmit FIFO Not Full (read)   */
 
 		.macro	addruart, rp, rv, tmp
 		mrc	p15, 0, \rp, c1, c0
diff --git a/arch/arm/mach-asm9260/Kconfig b/arch/arm/mach-asm9260/Kconfig
new file mode 100644
index 0000000..8423be7
--- /dev/null
+++ b/arch/arm/mach-asm9260/Kconfig
@@ -0,0 +1,6 @@
+config MACH_ASM9260
+	bool "Alphascale ASM9260"
+	depends on ARCH_MULTI_V5
+	select CPU_ARM926T
+	help
+	  Support for Alphascale ASM9260 based platform.
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index 2abad74..1bd39b4 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -5,8 +5,56 @@ menuconfig ARCH_BCM
 
 if ARCH_BCM
 
+comment "IPROC architected SoCs"
+
+config ARCH_BCM_IPROC
+	bool
+	select ARM_GIC
+	select CACHE_L2X0
+	select HAVE_ARM_SCU if SMP
+	select HAVE_ARM_TWD if SMP
+	select ARM_GLOBAL_TIMER
+
+	select CLKSRC_MMIO
+	select ARCH_REQUIRE_GPIOLIB
+	select ARM_AMBA
+	select PINCTRL
+	help
+	  This enables support for systems based on Broadcom IPROC architected SoCs.
+	  The IPROC complex contains one or more ARM CPUs along with common
+	  core periperals. Application specific SoCs are created by adding a
+	  uArchitecture containing peripherals outside of the IPROC complex.
+	  Currently supported SoCs are Cygnus.
+
+config ARCH_BCM_CYGNUS
+	bool "Broadcom Cygnus Support" if ARCH_MULTI_V7
+	select ARCH_BCM_IPROC
+	help
+	  Enable support for the Cygnus family,
+	  which includes the following variants:
+	  BCM11300, BCM11320, BCM11350, BCM11360,
+	  BCM58300, BCM58302, BCM58303, BCM58305.
+
+config ARCH_BCM_5301X
+	bool "Broadcom BCM470X / BCM5301X ARM SoC" if ARCH_MULTI_V7
+	select ARCH_BCM_IPROC
+	help
+	  Support for Broadcom BCM470X and BCM5301X SoCs with ARM CPU cores.
+
+	  This is a network SoC line mostly used in home routers and
+	  wifi access points, it's internal name is Northstar.
+	  This inclused the following SoC: BCM53010, BCM53011, BCM53012,
+	  BCM53014, BCM53015, BCM53016, BCM53017, BCM53018, BCM4707,
+	  BCM4708 and BCM4709.
+
+	  Do not confuse this with the BCM4760 which is a totally
+	  different SoC or with the older BCM47XX and BCM53XX based
+	  network SoC using a MIPS CPU, they are supported by arch/mips/bcm47xx
+
+comment "KONA architected SoCs"
+
 config ARCH_BCM_MOBILE
-	bool "Broadcom Mobile SoC Support" if ARCH_MULTI_V7
+	bool
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_775420
@@ -15,16 +63,13 @@ config ARCH_BCM_MOBILE
 	select TICK_ONESHOT
 	select HAVE_ARM_ARCH_TIMER
 	select PINCTRL
+	select ARCH_BCM_MOBILE_SMP if SMP
 	help
 	  This enables support for systems based on Broadcom mobile SoCs.
 
-if ARCH_BCM_MOBILE
-
-menu "Broadcom Mobile SoC Selection"
-
 config ARCH_BCM_281XX
 	bool "Broadcom BCM281XX SoC family"
-	default y
+	select ARCH_BCM_MOBILE
 	select HAVE_SMP
 	help
 	  Enable support for the BCM281XX family, which includes
@@ -33,7 +78,7 @@ config ARCH_BCM_281XX
 
 config ARCH_BCM_21664
 	bool "Broadcom BCM21664 SoC family"
-	default y
+	select ARCH_BCM_MOBILE
 	select HAVE_SMP
 	help
 	  Enable support for the BCM21664 family, which includes
@@ -41,19 +86,18 @@ config ARCH_BCM_21664
 
 config ARCH_BCM_MOBILE_L2_CACHE
 	bool "Broadcom mobile SoC level 2 cache support"
-	depends on (ARCH_BCM_281XX || ARCH_BCM_21664)
+	depends on ARCH_BCM_MOBILE
 	default y
 	select CACHE_L2X0
 	select ARCH_BCM_MOBILE_SMC
 
 config ARCH_BCM_MOBILE_SMC
 	bool
-	depends on ARCH_BCM_281XX || ARCH_BCM_21664
+	depends on ARCH_BCM_MOBILE
 
 config ARCH_BCM_MOBILE_SMP
-	bool "Broadcom mobile SoC SMP support"
-	depends on (ARCH_BCM_281XX || ARCH_BCM_21664) && SMP
-	default y
+	bool
+	depends on ARCH_BCM_MOBILE
 	select HAVE_ARM_SCU
 	select ARM_ERRATA_764369
 	help
@@ -61,9 +105,7 @@ config ARCH_BCM_MOBILE_SMP
 	  Provided as an option so SMP support for SoCs of this type
 	  can be disabled for an SMP-enabled kernel.
 
-endmenu
-
-endif
+comment "Other Architectures"
 
 config ARCH_BCM2835
 	bool "Broadcom BCM2835 family" if ARCH_MULTI_V6
@@ -78,27 +120,6 @@ config ARCH_BCM2835
 	  This enables support for the Broadcom BCM2835 SoC. This SoC is
 	  used in the Raspberry Pi and Roku 2 devices.
 
-config ARCH_BCM_5301X
-	bool "Broadcom BCM470X / BCM5301X ARM SoC" if ARCH_MULTI_V7
-	select ARM_GIC
-	select CACHE_L2X0
-	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if SMP
-	select ARM_GLOBAL_TIMER
-	select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
-	help
-	  Support for Broadcom BCM470X and BCM5301X SoCs with ARM CPU cores.
-
-	  This is a network SoC line mostly used in home routers and
-	  wifi access points, it's internal name is Northstar.
-	  This inclused the following SoC: BCM53010, BCM53011, BCM53012,
-	  BCM53014, BCM53015, BCM53016, BCM53017, BCM53018, BCM4707,
-	  BCM4708 and BCM4709.
-
-	  Do not confuse this with the BCM4760 which is a totally
-	  different SoC or with the older BCM47XX and BCM53XX based
-	  network SoC using a MIPS CPU, they are supported by arch/mips/bcm47xx
-
 config ARCH_BCM_63XX
 	bool "Broadcom BCM63xx DSL SoC" if ARCH_MULTI_V7
 	depends on MMU
@@ -118,10 +139,7 @@ config ARCH_BCM_63XX
 
 config ARCH_BRCMSTB
 	bool "Broadcom BCM7XXX based boards" if ARCH_MULTI_V7
-	depends on MMU
 	select ARM_GIC
-	select MIGHT_HAVE_PCI
-	select HAVE_SMP
 	select HAVE_ARM_ARCH_TIMER
 	select BRCMSTB_GISB_ARB
 	select BRCMSTB_L2_IRQ
diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile
index 300ae4b..4c38674 100644
--- a/arch/arm/mach-bcm/Makefile
+++ b/arch/arm/mach-bcm/Makefile
@@ -10,6 +10,9 @@
 # of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 
+# Cygnus
+obj-$(CONFIG_ARCH_BCM_CYGNUS) +=  bcm_cygnus.o
+
 # BCM281XX
 obj-$(CONFIG_ARCH_BCM_281XX)	+= board_bcm281xx.o
 
@@ -38,5 +41,7 @@ obj-$(CONFIG_ARCH_BCM_5301X)	+= bcm_5301x.o
 obj-$(CONFIG_ARCH_BCM_63XX)	:= bcm63xx.o
 
 ifeq ($(CONFIG_ARCH_BRCMSTB),y)
+CFLAGS_platsmp-brcmstb.o	+= -march=armv7-a
 obj-y				+= brcmstb.o
+obj-$(CONFIG_SMP)		+= headsmp-brcmstb.o platsmp-brcmstb.o
 endif
diff --git a/arch/arm/mach-bcm/bcm_cygnus.c b/arch/arm/mach-bcm/bcm_cygnus.c
new file mode 100644
index 0000000..30dc58b
--- /dev/null
+++ b/arch/arm/mach-bcm/bcm_cygnus.c
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <asm/mach/arch.h>
+
+static const char const *bcm_cygnus_dt_compat[] = {
+	"brcm,cygnus",
+	NULL,
+};
+
+DT_MACHINE_START(BCM_CYGNUS_DT, "Broadcom Cygnus SoC")
+	.l2c_aux_val	= 0,
+	.l2c_aux_mask	= ~0,
+	.dt_compat = bcm_cygnus_dt_compat,
+MACHINE_END
diff --git a/arch/arm/mach-bcm/brcmstb.h b/arch/arm/mach-bcm/brcmstb.h
new file mode 100644
index 0000000..ec0c3d1
--- /dev/null
+++ b/arch/arm/mach-bcm/brcmstb.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (C) 2013-2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __BRCMSTB_H__
+#define __BRCMSTB_H__
+
+void brcmstb_secondary_startup(void);
+
+#endif /* __BRCMSTB_H__ */
diff --git a/arch/arm/mach-bcm/headsmp-brcmstb.S b/arch/arm/mach-bcm/headsmp-brcmstb.S
new file mode 100644
index 0000000..199c1ea
--- /dev/null
+++ b/arch/arm/mach-bcm/headsmp-brcmstb.S
@@ -0,0 +1,33 @@
+/*
+ * SMP boot code for secondary CPUs
+ * Based on arch/arm/mach-tegra/headsmp.S
+ *
+ * Copyright (C) 2010 NVIDIA, Inc.
+ * Copyright (C) 2013-2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <asm/assembler.h>
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+        .section ".text.head", "ax"
+
+ENTRY(brcmstb_secondary_startup)
+        /*
+         * Ensure CPU is in a sane state by disabling all IRQs and switching
+         * into SVC mode.
+         */
+        setmode	PSR_I_BIT | PSR_F_BIT | SVC_MODE, r0
+
+        bl      v7_invalidate_l1
+        b       secondary_startup
+ENDPROC(brcmstb_secondary_startup)
diff --git a/arch/arm/mach-bcm/platsmp-brcmstb.c b/arch/arm/mach-bcm/platsmp-brcmstb.c
new file mode 100644
index 0000000..31c87a2
--- /dev/null
+++ b/arch/arm/mach-bcm/platsmp-brcmstb.c
@@ -0,0 +1,329 @@
+/*
+ * Broadcom STB CPU SMP and hotplug support for ARM
+ *
+ * Copyright (C) 2013-2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/printk.h>
+#include <linux/regmap.h>
+#include <linux/smp.h>
+#include <linux/mfd/syscon.h>
+
+#include <asm/cacheflush.h>
+#include <asm/cp15.h>
+#include <asm/mach-types.h>
+#include <asm/smp_plat.h>
+
+#include "brcmstb.h"
+
+enum {
+	ZONE_MAN_CLKEN_MASK		= BIT(0),
+	ZONE_MAN_RESET_CNTL_MASK	= BIT(1),
+	ZONE_MAN_MEM_PWR_MASK		= BIT(4),
+	ZONE_RESERVED_1_MASK		= BIT(5),
+	ZONE_MAN_ISO_CNTL_MASK		= BIT(6),
+	ZONE_MANUAL_CONTROL_MASK	= BIT(7),
+	ZONE_PWR_DN_REQ_MASK		= BIT(9),
+	ZONE_PWR_UP_REQ_MASK		= BIT(10),
+	ZONE_BLK_RST_ASSERT_MASK	= BIT(12),
+	ZONE_PWR_OFF_STATE_MASK		= BIT(25),
+	ZONE_PWR_ON_STATE_MASK		= BIT(26),
+	ZONE_DPG_PWR_STATE_MASK		= BIT(28),
+	ZONE_MEM_PWR_STATE_MASK		= BIT(29),
+	ZONE_RESET_STATE_MASK		= BIT(31),
+	CPU0_PWR_ZONE_CTRL_REG		= 1,
+	CPU_RESET_CONFIG_REG		= 2,
+};
+
+static void __iomem *cpubiuctrl_block;
+static void __iomem *hif_cont_block;
+static u32 cpu0_pwr_zone_ctrl_reg;
+static u32 cpu_rst_cfg_reg;
+static u32 hif_cont_reg;
+
+#ifdef CONFIG_HOTPLUG_CPU
+/*
+ * We must quiesce a dying CPU before it can be killed by the boot CPU. Because
+ * one or more cache may be disabled, we must flush to ensure coherency. We
+ * cannot use traditionl completion structures or spinlocks as they rely on
+ * coherency.
+ */
+static DEFINE_PER_CPU_ALIGNED(int, per_cpu_sw_state);
+
+static int per_cpu_sw_state_rd(u32 cpu)
+{
+	sync_cache_r(SHIFT_PERCPU_PTR(&per_cpu_sw_state, per_cpu_offset(cpu)));
+	return per_cpu(per_cpu_sw_state, cpu);
+}
+
+static void per_cpu_sw_state_wr(u32 cpu, int val)
+{
+	dmb();
+	per_cpu(per_cpu_sw_state, cpu) = val;
+	sync_cache_w(SHIFT_PERCPU_PTR(&per_cpu_sw_state, per_cpu_offset(cpu)));
+}
+#else
+static inline void per_cpu_sw_state_wr(u32 cpu, int val) { }
+#endif
+
+static void __iomem *pwr_ctrl_get_base(u32 cpu)
+{
+	void __iomem *base = cpubiuctrl_block + cpu0_pwr_zone_ctrl_reg;
+	base += (cpu_logical_map(cpu) * 4);
+	return base;
+}
+
+static u32 pwr_ctrl_rd(u32 cpu)
+{
+	void __iomem *base = pwr_ctrl_get_base(cpu);
+	return readl_relaxed(base);
+}
+
+static void pwr_ctrl_wr(u32 cpu, u32 val)
+{
+	void __iomem *base = pwr_ctrl_get_base(cpu);
+	writel(val, base);
+}
+
+static void cpu_rst_cfg_set(u32 cpu, int set)
+{
+	u32 val;
+	val = readl_relaxed(cpubiuctrl_block + cpu_rst_cfg_reg);
+	if (set)
+		val |= BIT(cpu_logical_map(cpu));
+	else
+		val &= ~BIT(cpu_logical_map(cpu));
+	writel_relaxed(val, cpubiuctrl_block + cpu_rst_cfg_reg);
+}
+
+static void cpu_set_boot_addr(u32 cpu, unsigned long boot_addr)
+{
+	const int reg_ofs = cpu_logical_map(cpu) * 8;
+	writel_relaxed(0, hif_cont_block + hif_cont_reg + reg_ofs);
+	writel_relaxed(boot_addr, hif_cont_block + hif_cont_reg + 4 + reg_ofs);
+}
+
+static void brcmstb_cpu_boot(u32 cpu)
+{
+	/* Mark this CPU as "up" */
+	per_cpu_sw_state_wr(cpu, 1);
+
+	/*
+	 * Set the reset vector to point to the secondary_startup
+	 * routine
+	 */
+	cpu_set_boot_addr(cpu, virt_to_phys(brcmstb_secondary_startup));
+
+	/* Unhalt the cpu */
+	cpu_rst_cfg_set(cpu, 0);
+}
+
+static void brcmstb_cpu_power_on(u32 cpu)
+{
+	/*
+	 * The secondary cores power was cut, so we must go through
+	 * power-on initialization.
+	 */
+	u32 tmp;
+
+	/* Request zone power up */
+	pwr_ctrl_wr(cpu, ZONE_PWR_UP_REQ_MASK);
+
+	/* Wait for the power up FSM to complete */
+	do {
+		tmp = pwr_ctrl_rd(cpu);
+	} while (!(tmp & ZONE_PWR_ON_STATE_MASK));
+}
+
+static int brcmstb_cpu_get_power_state(u32 cpu)
+{
+	int tmp = pwr_ctrl_rd(cpu);
+	return (tmp & ZONE_RESET_STATE_MASK) ? 0 : 1;
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+
+static void brcmstb_cpu_die(u32 cpu)
+{
+	v7_exit_coherency_flush(all);
+
+	per_cpu_sw_state_wr(cpu, 0);
+
+	/* Sit and wait to die */
+	wfi();
+
+	/* We should never get here... */
+	while (1)
+		;
+}
+
+static int brcmstb_cpu_kill(u32 cpu)
+{
+	u32 tmp;
+
+	while (per_cpu_sw_state_rd(cpu))
+		;
+
+	/* Program zone reset */
+	pwr_ctrl_wr(cpu, ZONE_RESET_STATE_MASK | ZONE_BLK_RST_ASSERT_MASK |
+			      ZONE_PWR_DN_REQ_MASK);
+
+	/* Verify zone reset */
+	tmp = pwr_ctrl_rd(cpu);
+	if (!(tmp & ZONE_RESET_STATE_MASK))
+		pr_err("%s: Zone reset bit for CPU %d not asserted!\n",
+			__func__, cpu);
+
+	/* Wait for power down */
+	do {
+		tmp = pwr_ctrl_rd(cpu);
+	} while (!(tmp & ZONE_PWR_OFF_STATE_MASK));
+
+	/* Flush pipeline before resetting CPU */
+	mb();
+
+	/* Assert reset on the CPU */
+	cpu_rst_cfg_set(cpu, 1);
+
+	return 1;
+}
+
+#endif /* CONFIG_HOTPLUG_CPU */
+
+static int __init setup_hifcpubiuctrl_regs(struct device_node *np)
+{
+	int rc = 0;
+	char *name;
+	struct device_node *syscon_np = NULL;
+
+	name = "syscon-cpu";
+
+	syscon_np = of_parse_phandle(np, name, 0);
+	if (!syscon_np) {
+		pr_err("can't find phandle %s\n", name);
+		rc = -EINVAL;
+		goto cleanup;
+	}
+
+	cpubiuctrl_block = of_iomap(syscon_np, 0);
+	if (!cpubiuctrl_block) {
+		pr_err("iomap failed for cpubiuctrl_block\n");
+		rc = -EINVAL;
+		goto cleanup;
+	}
+
+	rc = of_property_read_u32_index(np, name, CPU0_PWR_ZONE_CTRL_REG,
+					&cpu0_pwr_zone_ctrl_reg);
+	if (rc) {
+		pr_err("failed to read 1st entry from %s property (%d)\n", name,
+			rc);
+		rc = -EINVAL;
+		goto cleanup;
+	}
+
+	rc = of_property_read_u32_index(np, name, CPU_RESET_CONFIG_REG,
+					&cpu_rst_cfg_reg);
+	if (rc) {
+		pr_err("failed to read 2nd entry from %s property (%d)\n", name,
+			rc);
+		rc = -EINVAL;
+		goto cleanup;
+	}
+
+cleanup:
+	of_node_put(syscon_np);
+	return rc;
+}
+
+static int __init setup_hifcont_regs(struct device_node *np)
+{
+	int rc = 0;
+	char *name;
+	struct device_node *syscon_np = NULL;
+
+	name = "syscon-cont";
+
+	syscon_np = of_parse_phandle(np, name, 0);
+	if (!syscon_np) {
+		pr_err("can't find phandle %s\n", name);
+		rc = -EINVAL;
+		goto cleanup;
+	}
+
+	hif_cont_block = of_iomap(syscon_np, 0);
+	if (!hif_cont_block) {
+		pr_err("iomap failed for hif_cont_block\n");
+		rc = -EINVAL;
+		goto cleanup;
+	}
+
+	/* Offset is at top of hif_cont_block */
+	hif_cont_reg = 0;
+
+cleanup:
+	of_node_put(syscon_np);
+	return rc;
+}
+
+static void __init brcmstb_cpu_ctrl_setup(unsigned int max_cpus)
+{
+	int rc;
+	struct device_node *np;
+	char *name;
+
+	name = "brcm,brcmstb-smpboot";
+	np = of_find_compatible_node(NULL, NULL, name);
+	if (!np) {
+		pr_err("can't find compatible node %s\n", name);
+		return;
+	}
+
+	rc = setup_hifcpubiuctrl_regs(np);
+	if (rc)
+		return;
+
+	rc = setup_hifcont_regs(np);
+	if (rc)
+		return;
+}
+
+static int brcmstb_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	/* Missing the brcm,brcmstb-smpboot DT node? */
+	if (!cpubiuctrl_block || !hif_cont_block)
+		return -ENODEV;
+
+	/* Bring up power to the core if necessary */
+	if (brcmstb_cpu_get_power_state(cpu) == 0)
+		brcmstb_cpu_power_on(cpu);
+
+	brcmstb_cpu_boot(cpu);
+
+	return 0;
+}
+
+static struct smp_operations brcmstb_smp_ops __initdata = {
+	.smp_prepare_cpus	= brcmstb_cpu_ctrl_setup,
+	.smp_boot_secondary	= brcmstb_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_kill		= brcmstb_cpu_kill,
+	.cpu_die		= brcmstb_cpu_die,
+#endif
+};
+
+CPU_METHOD_OF_DECLARE(brcmstb_smp, "brcm,brahma-b15", &brcmstb_smp_ops);
diff --git a/arch/arm/mach-berlin/Kconfig b/arch/arm/mach-berlin/Kconfig
index 24f85be..3e40a94 100644
--- a/arch/arm/mach-berlin/Kconfig
+++ b/arch/arm/mach-berlin/Kconfig
@@ -1,10 +1,11 @@
 menuconfig ARCH_BERLIN
 	bool "Marvell Berlin SoCs" if ARCH_MULTI_V7
+	select ARCH_HAS_RESET_CONTROLLER
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_GIC
-	select GENERIC_IRQ_CHIP
 	select DW_APB_ICTL
 	select DW_APB_TIMER_OF
+	select GENERIC_IRQ_CHIP
 	select PINCTRL
 
 if ARCH_BERLIN
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 2d0240f..b9e3f1c 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -24,6 +24,7 @@ menuconfig ARCH_EXYNOS
 	select PM_GENERIC_DOMAINS if PM_RUNTIME
 	select S5P_DEV_MFC
 	select SRAM
+	select MFD_SYSCON
 	help
 	  Support for SAMSUNG EXYNOS SoCs (EXYNOS4/5)
 
@@ -75,6 +76,11 @@ config SOC_EXYNOS4412
 	default y
 	depends on ARCH_EXYNOS4
 
+config SOC_EXYNOS4415
+	bool "SAMSUNG EXYNOS4415"
+	default y
+	depends on ARCH_EXYNOS4
+
 config SOC_EXYNOS5250
 	bool "SAMSUNG EXYNOS5250"
 	default y
@@ -123,4 +129,9 @@ config EXYNOS5420_MCPM
 	  This is needed to provide CPU and cluster power management
 	  on Exynos5420 implementing big.LITTLE.
 
+config EXYNOS_CPU_SUSPEND
+	bool
+	select ARM_CPU_SUSPEND
+	default PM_SLEEP || ARM_EXYNOS_CPUIDLE
+
 endif
diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index d634de5..bcefb54 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -11,13 +11,15 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include -I$(srctree)
 
 obj-$(CONFIG_ARCH_EXYNOS)	+= exynos.o pmu.o exynos-smc.o firmware.o
 
-obj-$(CONFIG_PM_SLEEP)		+= pm.o sleep.o
+obj-$(CONFIG_EXYNOS_CPU_SUSPEND) += pm.o sleep.o
+obj-$(CONFIG_PM_SLEEP)		+= suspend.o
 obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o
 
 obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
 
 plus_sec := $(call as-instr,.arch_extension sec,+sec)
 AFLAGS_exynos-smc.o		:=-Wa,-march=armv7-a$(plus_sec)
+AFLAGS_sleep.o			:=-Wa,-march=armv7-a$(plus_sec)
 
 obj-$(CONFIG_EXYNOS5420_MCPM)	+= mcpm-exynos.o
 CFLAGS_mcpm-exynos.o		+= -march=armv7-a
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index 3d3e6af..865f878 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -12,7 +12,6 @@
 #ifndef __ARCH_ARM_MACH_EXYNOS_COMMON_H
 #define __ARCH_ARM_MACH_EXYNOS_COMMON_H
 
-#include <linux/reboot.h>
 #include <linux/of.h>
 
 #define EXYNOS3250_SOC_ID	0xE3472000
@@ -111,11 +110,19 @@ IS_SAMSUNG_CPU(exynos5800, EXYNOS5800_SOC_ID, EXYNOS5_SOC_MASK)
 #define soc_is_exynos5() (soc_is_exynos5250() || soc_is_exynos5410() || \
 			  soc_is_exynos5420() || soc_is_exynos5800())
 
+extern u32 cp15_save_diag;
+extern u32 cp15_save_power;
+
 extern void __iomem *sysram_ns_base_addr;
 extern void __iomem *sysram_base_addr;
 extern void __iomem *pmu_base_addr;
 void exynos_sysram_init(void);
 
+enum {
+	FW_DO_IDLE_SLEEP,
+	FW_DO_IDLE_AFTR,
+};
+
 void exynos_firmware_init(void);
 
 extern u32 exynos_get_eint_wake_mask(void);
@@ -127,32 +134,20 @@ static inline void exynos_pm_init(void) {}
 #endif
 
 extern void exynos_cpu_resume(void);
+extern void exynos_cpu_resume_ns(void);
 
 extern struct smp_operations exynos_smp_ops;
 
-/* PMU(Power Management Unit) support */
-
-#define PMU_TABLE_END	(-1U)
-
-enum sys_powerdown {
-	SYS_AFTR,
-	SYS_LPA,
-	SYS_SLEEP,
-	NUM_SYS_POWERDOWN,
-};
-
-struct exynos_pmu_conf {
-	unsigned int offset;
-	unsigned int val[NUM_SYS_POWERDOWN];
-};
-
-extern void exynos_sys_powerdown_conf(enum sys_powerdown mode);
 extern void exynos_cpu_power_down(int cpu);
 extern void exynos_cpu_power_up(int cpu);
 extern int  exynos_cpu_power_state(int cpu);
 extern void exynos_cluster_power_down(int cluster);
 extern void exynos_cluster_power_up(int cluster);
 extern int  exynos_cluster_power_state(int cluster);
+extern void exynos_cpu_save_register(void);
+extern void exynos_cpu_restore_register(void);
+extern void exynos_pm_central_suspend(void);
+extern int exynos_pm_central_resume(void);
 extern void exynos_enter_aftr(void);
 
 extern void s5p_init_cpu(void __iomem *cpuid_addr);
diff --git a/arch/arm/mach-exynos/exynos-pmu.h b/arch/arm/mach-exynos/exynos-pmu.h
new file mode 100644
index 0000000..a2ab0d5
--- /dev/null
+++ b/arch/arm/mach-exynos/exynos-pmu.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Header for EXYNOS PMU Driver support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __EXYNOS_PMU_H
+#define __EXYNOS_PMU_H
+
+enum sys_powerdown {
+	SYS_AFTR,
+	SYS_LPA,
+	SYS_SLEEP,
+	NUM_SYS_POWERDOWN,
+};
+
+extern void exynos_sys_powerdown_conf(enum sys_powerdown mode);
+
+#endif /* __EXYNOS_PMU_H */
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index 6de7cf5..c13d083 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -87,28 +87,6 @@ static struct map_desc exynos5_iodesc[] __initdata = {
 	},
 };
 
-static void exynos_restart(enum reboot_mode mode, const char *cmd)
-{
-	struct device_node *np;
-	u32 val = 0x1;
-	void __iomem *addr = pmu_base_addr + EXYNOS_SWRESET;
-
-	if (of_machine_is_compatible("samsung,exynos5440")) {
-		u32 status;
-		np = of_find_compatible_node(NULL, NULL, "samsung,exynos5440-clock");
-
-		addr = of_iomap(np, 0) + 0xbc;
-		status = __raw_readl(addr);
-
-		addr = of_iomap(np, 0) + 0xcc;
-		val = __raw_readl(addr);
-
-		val = (val & 0xffff0000) | (status & 0xffff);
-	}
-
-	__raw_writel(val, addr);
-}
-
 static struct platform_device exynos_cpuidle = {
 	.name              = "exynos_cpuidle",
 #ifdef CONFIG_ARM_EXYNOS_CPUIDLE
@@ -202,6 +180,7 @@ static const struct of_device_id exynos_dt_pmu_match[] = {
 	{ .compatible = "samsung,exynos4210-pmu" },
 	{ .compatible = "samsung,exynos4212-pmu" },
 	{ .compatible = "samsung,exynos4412-pmu" },
+	{ .compatible = "samsung,exynos4415-pmu" },
 	{ .compatible = "samsung,exynos5250-pmu" },
 	{ .compatible = "samsung,exynos5260-pmu" },
 	{ .compatible = "samsung,exynos5410-pmu" },
@@ -268,7 +247,10 @@ static void __init exynos_dt_machine_init(void)
 		exynos_sysram_init();
 
 	if (of_machine_is_compatible("samsung,exynos4210") ||
-			of_machine_is_compatible("samsung,exynos5250"))
+	    of_machine_is_compatible("samsung,exynos4212") ||
+	    (of_machine_is_compatible("samsung,exynos4412") &&
+	     of_machine_is_compatible("samsung,trats2")) ||
+	    of_machine_is_compatible("samsung,exynos5250"))
 		platform_device_register(&exynos_cpuidle);
 
 	platform_device_register_simple("exynos-cpufreq", -1, NULL, 0);
@@ -283,6 +265,7 @@ static char const *exynos_dt_compat[] __initconst = {
 	"samsung,exynos4210",
 	"samsung,exynos4212",
 	"samsung,exynos4412",
+	"samsung,exynos4415",
 	"samsung,exynos5",
 	"samsung,exynos5250",
 	"samsung,exynos5260",
@@ -328,7 +311,6 @@ DT_MACHINE_START(EXYNOS_DT, "SAMSUNG EXYNOS (Flattened Device Tree)")
 	.init_machine	= exynos_dt_machine_init,
 	.init_late	= exynos_init_late,
 	.dt_compat	= exynos_dt_compat,
-	.restart	= exynos_restart,
 	.reserve	= exynos_reserve,
 	.dt_fixup	= exynos_dt_fixup,
 MACHINE_END
diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c
index e8797bb..766f57d 100644
--- a/arch/arm/mach-exynos/firmware.c
+++ b/arch/arm/mach-exynos/firmware.c
@@ -14,16 +14,44 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 
+#include <asm/cacheflush.h>
+#include <asm/cputype.h>
 #include <asm/firmware.h>
+#include <asm/suspend.h>
 
 #include <mach/map.h>
 
 #include "common.h"
 #include "smc.h"
 
-static int exynos_do_idle(void)
+#define EXYNOS_SLEEP_MAGIC	0x00000bad
+#define EXYNOS_AFTR_MAGIC	0xfcba0d10
+#define EXYNOS_BOOT_ADDR	0x8
+#define EXYNOS_BOOT_FLAG	0xc
+
+static void exynos_save_cp15(void)
 {
-	exynos_smc(SMC_CMD_SLEEP, 0, 0, 0);
+	/* Save Power control and Diagnostic registers */
+	asm ("mrc p15, 0, %0, c15, c0, 0\n"
+	     "mrc p15, 0, %1, c15, c0, 1\n"
+	     : "=r" (cp15_save_power), "=r" (cp15_save_diag)
+	     : : "cc");
+}
+
+static int exynos_do_idle(unsigned long mode)
+{
+	switch (mode) {
+	case FW_DO_IDLE_AFTR:
+		if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
+			exynos_save_cp15();
+		__raw_writel(virt_to_phys(exynos_cpu_resume_ns),
+			     sysram_ns_base_addr + 0x24);
+		__raw_writel(EXYNOS_AFTR_MAGIC, sysram_ns_base_addr + 0x20);
+		exynos_smc(SMC_CMD_CPU0AFTR, 0, 0, 0);
+		break;
+	case FW_DO_IDLE_SLEEP:
+		exynos_smc(SMC_CMD_SLEEP, 0, 0, 0);
+	}
 	return 0;
 }
 
@@ -69,10 +97,43 @@ static int exynos_set_cpu_boot_addr(int cpu, unsigned long boot_addr)
 	return 0;
 }
 
+static int exynos_cpu_suspend(unsigned long arg)
+{
+	flush_cache_all();
+	outer_flush_all();
+
+	exynos_smc(SMC_CMD_SLEEP, 0, 0, 0);
+
+	pr_info("Failed to suspend the system\n");
+	writel(0, sysram_ns_base_addr + EXYNOS_BOOT_FLAG);
+	return 1;
+}
+
+static int exynos_suspend(void)
+{
+	if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
+		exynos_save_cp15();
+
+	writel(EXYNOS_SLEEP_MAGIC, sysram_ns_base_addr + EXYNOS_BOOT_FLAG);
+	writel(virt_to_phys(exynos_cpu_resume_ns),
+		sysram_ns_base_addr + EXYNOS_BOOT_ADDR);
+
+	return cpu_suspend(0, exynos_cpu_suspend);
+}
+
+static int exynos_resume(void)
+{
+	writel(0, sysram_ns_base_addr + EXYNOS_BOOT_FLAG);
+
+	return 0;
+}
+
 static const struct firmware_ops exynos_firmware_ops = {
-	.do_idle		= exynos_do_idle,
+	.do_idle		= IS_ENABLED(CONFIG_EXYNOS_CPU_SUSPEND) ? exynos_do_idle : NULL,
 	.set_cpu_boot_addr	= exynos_set_cpu_boot_addr,
 	.cpu_boot		= exynos_cpu_boot,
+	.suspend		= IS_ENABLED(CONFIG_PM_SLEEP) ? exynos_suspend : NULL,
+	.resume			= IS_ENABLED(CONFIG_EXYNOS_CPU_SUSPEND) ? exynos_resume : NULL,
 };
 
 void __init exynos_firmware_init(void)
diff --git a/arch/arm/mach-exynos/mcpm-exynos.c b/arch/arm/mach-exynos/mcpm-exynos.c
index dc9a764..b0d3c2e 100644
--- a/arch/arm/mach-exynos/mcpm-exynos.c
+++ b/arch/arm/mach-exynos/mcpm-exynos.c
@@ -15,6 +15,7 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/of_address.h>
+#include <linux/syscore_ops.h>
 
 #include <asm/cputype.h>
 #include <asm/cp15.h>
@@ -30,6 +31,8 @@
 #define EXYNOS5420_USE_ARM_CORE_DOWN_STATE	BIT(29)
 #define EXYNOS5420_USE_L2_COMMON_UP_STATE	BIT(30)
 
+static void __iomem *ns_sram_base_addr;
+
 /*
  * The common v7_exit_coherency_flush API could not be used because of the
  * Erratum 799270 workaround. This macro is the same as the common one (in
@@ -318,10 +321,26 @@ static const struct of_device_id exynos_dt_mcpm_match[] = {
 	{},
 };
 
+static void exynos_mcpm_setup_entry_point(void)
+{
+	/*
+	 * U-Boot SPL is hardcoded to jump to the start of ns_sram_base_addr
+	 * as part of secondary_cpu_start().  Let's redirect it to the
+	 * mcpm_entry_point(). This is done during both secondary boot-up as
+	 * well as system resume.
+	 */
+	__raw_writel(0xe59f0000, ns_sram_base_addr);     /* ldr r0, [pc, #0] */
+	__raw_writel(0xe12fff10, ns_sram_base_addr + 4); /* bx  r0 */
+	__raw_writel(virt_to_phys(mcpm_entry_point), ns_sram_base_addr + 8);
+}
+
+static struct syscore_ops exynos_mcpm_syscore_ops = {
+	.resume	= exynos_mcpm_setup_entry_point,
+};
+
 static int __init exynos_mcpm_init(void)
 {
 	struct device_node *node;
-	void __iomem *ns_sram_base_addr;
 	unsigned int value, i;
 	int ret;
 
@@ -387,16 +406,9 @@ static int __init exynos_mcpm_init(void)
 		pmu_raw_writel(value, EXYNOS_COMMON_OPTION(i));
 	}
 
-	/*
-	 * U-Boot SPL is hardcoded to jump to the start of ns_sram_base_addr
-	 * as part of secondary_cpu_start().  Let's redirect it to the
-	 * mcpm_entry_point().
-	 */
-	__raw_writel(0xe59f0000, ns_sram_base_addr);     /* ldr r0, [pc, #0] */
-	__raw_writel(0xe12fff10, ns_sram_base_addr + 4); /* bx  r0 */
-	__raw_writel(virt_to_phys(mcpm_entry_point), ns_sram_base_addr + 8);
+	exynos_mcpm_setup_entry_point();
 
-	iounmap(ns_sram_base_addr);
+	register_syscore_ops(&exynos_mcpm_syscore_ops);
 
 	return ret;
 }
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index 9c6dd14..7a1ebfe 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -126,6 +126,18 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
  */
 void exynos_cpu_power_down(int cpu)
 {
+	if (cpu == 0 && (of_machine_is_compatible("samsung,exynos5420") ||
+		of_machine_is_compatible("samsung,exynos5800"))) {
+		/*
+		 * Bypass power down for CPU0 during suspend. Check for
+		 * the SYS_PWR_REG value to decide if we are suspending
+		 * the system.
+		 */
+		int val = pmu_raw_readl(EXYNOS5_ARM_CORE0_SYS_PWR_REG);
+
+		if (!(val & S5P_CORE_LOCAL_PWR_EN))
+			return;
+	}
 	pmu_raw_writel(0, EXYNOS_ARM_CORE_CONFIGURATION(cpu));
 }
 
@@ -204,6 +216,26 @@ static inline void __iomem *cpu_boot_reg(int cpu)
 }
 
 /*
+ * Set wake up by local power mode and execute software reset for given core.
+ *
+ * Currently this is needed only when booting secondary CPU on Exynos3250.
+ */
+static void exynos_core_restart(u32 core_id)
+{
+	u32 val;
+
+	if (!of_machine_is_compatible("samsung,exynos3250"))
+		return;
+
+	val = pmu_raw_readl(EXYNOS_ARM_CORE_STATUS(core_id));
+	val |= S5P_CORE_WAKEUP_FROM_LOCAL_CFG;
+	pmu_raw_writel(val, EXYNOS_ARM_CORE_STATUS(core_id));
+
+	pr_info("CPU%u: Software reset\n", core_id);
+	pmu_raw_writel(EXYNOS_CORE_PO_RESET(core_id), EXYNOS_SWRESET);
+}
+
+/*
  * Write pen_release in a way that is guaranteed to be visible to all
  * observers, irrespective of whether they're taking part in coherency
  * or not.  This is necessary for the hotplug code to work reliably.
@@ -279,6 +311,9 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
 			return -ETIMEDOUT;
 		}
 	}
+
+	exynos_core_restart(core_id);
+
 	/*
 	 * Send the secondary CPU a soft interrupt, thereby causing
 	 * the boot monitor to read the system wide flags register,
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index abefacb..86f3ecd 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2011-2014 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
  * EXYNOS - Power Management support
@@ -15,109 +15,45 @@
 
 #include <linux/init.h>
 #include <linux/suspend.h>
-#include <linux/syscore_ops.h>
 #include <linux/cpu_pm.h>
 #include <linux/io.h>
-#include <linux/irqchip/arm-gic.h>
 #include <linux/err.h>
-#include <linux/clk.h>
 
-#include <asm/cacheflush.h>
-#include <asm/hardware/cache-l2x0.h>
+#include <asm/firmware.h>
 #include <asm/smp_scu.h>
 #include <asm/suspend.h>
 
 #include <plat/pm-common.h>
-#include <plat/regs-srom.h>
-
-#include <mach/map.h>
 
 #include "common.h"
+#include "exynos-pmu.h"
 #include "regs-pmu.h"
 #include "regs-sys.h"
 
-/**
- * struct exynos_wkup_irq - Exynos GIC to PMU IRQ mapping
- * @hwirq: Hardware IRQ signal of the GIC
- * @mask: Mask in PMU wake-up mask register
- */
-struct exynos_wkup_irq {
-	unsigned int hwirq;
-	u32 mask;
-};
-
-static struct sleep_save exynos5_sys_save[] = {
-	SAVE_ITEM(EXYNOS5_SYS_I2C_CFG),
-};
-
-static struct sleep_save exynos_core_save[] = {
-	/* SROM side */
-	SAVE_ITEM(S5P_SROM_BW),
-	SAVE_ITEM(S5P_SROM_BC0),
-	SAVE_ITEM(S5P_SROM_BC1),
-	SAVE_ITEM(S5P_SROM_BC2),
-	SAVE_ITEM(S5P_SROM_BC3),
-};
-
-/*
- * GIC wake-up support
- */
-
-static u32 exynos_irqwake_intmask = 0xffffffff;
-
-static const struct exynos_wkup_irq exynos4_wkup_irq[] = {
-	{ 76, BIT(1) }, /* RTC alarm */
-	{ 77, BIT(2) }, /* RTC tick */
-	{ /* sentinel */ },
-};
-
-static const struct exynos_wkup_irq exynos5250_wkup_irq[] = {
-	{ 75, BIT(1) }, /* RTC alarm */
-	{ 76, BIT(2) }, /* RTC tick */
-	{ /* sentinel */ },
-};
-
-static int exynos_irq_set_wake(struct irq_data *data, unsigned int state)
+static inline void __iomem *exynos_boot_vector_addr(void)
 {
-	const struct exynos_wkup_irq *wkup_irq;
-
-	if (soc_is_exynos5250())
-		wkup_irq = exynos5250_wkup_irq;
-	else
-		wkup_irq = exynos4_wkup_irq;
-
-	while (wkup_irq->mask) {
-		if (wkup_irq->hwirq == data->hwirq) {
-			if (!state)
-				exynos_irqwake_intmask |= wkup_irq->mask;
-			else
-				exynos_irqwake_intmask &= ~wkup_irq->mask;
-			return 0;
-		}
-		++wkup_irq;
-	}
-
-	return -ENOENT;
+	if (samsung_rev() == EXYNOS4210_REV_1_1)
+		return pmu_base_addr + S5P_INFORM7;
+	else if (samsung_rev() == EXYNOS4210_REV_1_0)
+		return sysram_base_addr + 0x24;
+	return pmu_base_addr + S5P_INFORM0;
 }
 
-#define EXYNOS_BOOT_VECTOR_ADDR	(samsung_rev() == EXYNOS4210_REV_1_1 ? \
-			pmu_base_addr + S5P_INFORM7 : \
-			(samsung_rev() == EXYNOS4210_REV_1_0 ? \
-			(sysram_base_addr + 0x24) : \
-			pmu_base_addr + S5P_INFORM0))
-#define EXYNOS_BOOT_VECTOR_FLAG	(samsung_rev() == EXYNOS4210_REV_1_1 ? \
-			pmu_base_addr + S5P_INFORM6 : \
-			(samsung_rev() == EXYNOS4210_REV_1_0 ? \
-			(sysram_base_addr + 0x20) : \
-			pmu_base_addr + S5P_INFORM1))
+static inline void __iomem *exynos_boot_vector_flag(void)
+{
+	if (samsung_rev() == EXYNOS4210_REV_1_1)
+		return pmu_base_addr + S5P_INFORM6;
+	else if (samsung_rev() == EXYNOS4210_REV_1_0)
+		return sysram_base_addr + 0x20;
+	return pmu_base_addr + S5P_INFORM1;
+}
 
 #define S5P_CHECK_AFTR  0xFCBA0D10
-#define S5P_CHECK_SLEEP 0x00000BAD
 
 /* For Cortex-A9 Diagnostic and Power control register */
 static unsigned int save_arm_register[2];
 
-static void exynos_cpu_save_register(void)
+void exynos_cpu_save_register(void)
 {
 	unsigned long tmp;
 
@@ -134,7 +70,7 @@ static void exynos_cpu_save_register(void)
 	save_arm_register[1] = tmp;
 }
 
-static void exynos_cpu_restore_register(void)
+void exynos_cpu_restore_register(void)
 {
 	unsigned long tmp;
 
@@ -153,7 +89,7 @@ static void exynos_cpu_restore_register(void)
 		      : "cc");
 }
 
-static void exynos_pm_central_suspend(void)
+void exynos_pm_central_suspend(void)
 {
 	unsigned long tmp;
 
@@ -161,9 +97,13 @@ static void exynos_pm_central_suspend(void)
 	tmp = pmu_raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
 	tmp &= ~S5P_CENTRAL_LOWPWR_CFG;
 	pmu_raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
+
+	/* Setting SEQ_OPTION register */
+	pmu_raw_writel(S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0,
+		       S5P_CENTRAL_SEQ_OPTION);
 }
 
-static int exynos_pm_central_resume(void)
+int exynos_pm_central_resume(void)
 {
 	unsigned long tmp;
 
@@ -194,17 +134,26 @@ static void exynos_set_wakeupmask(long mask)
 
 static void exynos_cpu_set_boot_vector(long flags)
 {
-	__raw_writel(virt_to_phys(exynos_cpu_resume), EXYNOS_BOOT_VECTOR_ADDR);
-	__raw_writel(flags, EXYNOS_BOOT_VECTOR_FLAG);
+	__raw_writel(virt_to_phys(exynos_cpu_resume),
+		     exynos_boot_vector_addr());
+	__raw_writel(flags, exynos_boot_vector_flag());
 }
 
 static int exynos_aftr_finisher(unsigned long flags)
 {
+	int ret;
+
 	exynos_set_wakeupmask(0x0000ff3e);
-	exynos_cpu_set_boot_vector(S5P_CHECK_AFTR);
 	/* Set value of power down register for aftr mode */
 	exynos_sys_powerdown_conf(SYS_AFTR);
-	cpu_do_idle();
+
+	ret = call_firmware_op(do_idle, FW_DO_IDLE_AFTR);
+	if (ret == -ENOSYS) {
+		if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
+			exynos_cpu_save_register();
+		exynos_cpu_set_boot_vector(S5P_CHECK_AFTR);
+		cpu_do_idle();
+	}
 
 	return 1;
 }
@@ -214,196 +163,16 @@ void exynos_enter_aftr(void)
 	cpu_pm_enter();
 
 	exynos_pm_central_suspend();
-	if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
-		exynos_cpu_save_register();
 
 	cpu_suspend(0, exynos_aftr_finisher);
 
 	if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) {
 		scu_enable(S5P_VA_SCU);
-		exynos_cpu_restore_register();
+		if (call_firmware_op(resume) == -ENOSYS)
+			exynos_cpu_restore_register();
 	}
 
 	exynos_pm_central_resume();
 
 	cpu_pm_exit();
 }
-
-static int exynos_cpu_suspend(unsigned long arg)
-{
-#ifdef CONFIG_CACHE_L2X0
-	outer_flush_all();
-#endif
-
-	if (soc_is_exynos5250())
-		flush_cache_all();
-
-	/* issue the standby signal into the pm unit. */
-	cpu_do_idle();
-
-	pr_info("Failed to suspend the system\n");
-	return 1; /* Aborting suspend */
-}
-
-static void exynos_pm_prepare(void)
-{
-	unsigned int tmp;
-
-	/* Set wake-up mask registers */
-	pmu_raw_writel(exynos_get_eint_wake_mask(), S5P_EINT_WAKEUP_MASK);
-	pmu_raw_writel(exynos_irqwake_intmask & ~(1 << 31), S5P_WAKEUP_MASK);
-
-	s3c_pm_do_save(exynos_core_save, ARRAY_SIZE(exynos_core_save));
-
-	if (soc_is_exynos5250()) {
-		s3c_pm_do_save(exynos5_sys_save, ARRAY_SIZE(exynos5_sys_save));
-		/* Disable USE_RETENTION of JPEG_MEM_OPTION */
-		tmp = pmu_raw_readl(EXYNOS5_JPEG_MEM_OPTION);
-		tmp &= ~EXYNOS5_OPTION_USE_RETENTION;
-		pmu_raw_writel(tmp, EXYNOS5_JPEG_MEM_OPTION);
-	}
-
-	/* Set value of power down register for sleep mode */
-
-	exynos_sys_powerdown_conf(SYS_SLEEP);
-	pmu_raw_writel(S5P_CHECK_SLEEP, S5P_INFORM1);
-
-	/* ensure at least INFORM0 has the resume address */
-
-	pmu_raw_writel(virt_to_phys(exynos_cpu_resume), S5P_INFORM0);
-}
-
-static int exynos_pm_suspend(void)
-{
-	unsigned long tmp;
-
-	exynos_pm_central_suspend();
-
-	/* Setting SEQ_OPTION register */
-
-	tmp = (S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0);
-	pmu_raw_writel(tmp, S5P_CENTRAL_SEQ_OPTION);
-
-	if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
-		exynos_cpu_save_register();
-
-	return 0;
-}
-
-static void exynos_pm_resume(void)
-{
-	if (exynos_pm_central_resume())
-		goto early_wakeup;
-
-	if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
-		exynos_cpu_restore_register();
-
-	/* For release retention */
-
-	pmu_raw_writel((1 << 28), S5P_PAD_RET_MAUDIO_OPTION);
-	pmu_raw_writel((1 << 28), S5P_PAD_RET_GPIO_OPTION);
-	pmu_raw_writel((1 << 28), S5P_PAD_RET_UART_OPTION);
-	pmu_raw_writel((1 << 28), S5P_PAD_RET_MMCA_OPTION);
-	pmu_raw_writel((1 << 28), S5P_PAD_RET_MMCB_OPTION);
-	pmu_raw_writel((1 << 28), S5P_PAD_RET_EBIA_OPTION);
-	pmu_raw_writel((1 << 28), S5P_PAD_RET_EBIB_OPTION);
-
-	if (soc_is_exynos5250())
-		s3c_pm_do_restore(exynos5_sys_save,
-			ARRAY_SIZE(exynos5_sys_save));
-
-	s3c_pm_do_restore_core(exynos_core_save, ARRAY_SIZE(exynos_core_save));
-
-	if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
-		scu_enable(S5P_VA_SCU);
-
-early_wakeup:
-
-	/* Clear SLEEP mode set in INFORM1 */
-	pmu_raw_writel(0x0, S5P_INFORM1);
-
-	return;
-}
-
-static struct syscore_ops exynos_pm_syscore_ops = {
-	.suspend	= exynos_pm_suspend,
-	.resume		= exynos_pm_resume,
-};
-
-/*
- * Suspend Ops
- */
-
-static int exynos_suspend_enter(suspend_state_t state)
-{
-	int ret;
-
-	s3c_pm_debug_init();
-
-	S3C_PMDBG("%s: suspending the system...\n", __func__);
-
-	S3C_PMDBG("%s: wakeup masks: %08x,%08x\n", __func__,
-			exynos_irqwake_intmask, exynos_get_eint_wake_mask());
-
-	if (exynos_irqwake_intmask == -1U
-	    && exynos_get_eint_wake_mask() == -1U) {
-		pr_err("%s: No wake-up sources!\n", __func__);
-		pr_err("%s: Aborting sleep\n", __func__);
-		return -EINVAL;
-	}
-
-	s3c_pm_save_uarts();
-	exynos_pm_prepare();
-	flush_cache_all();
-	s3c_pm_check_store();
-
-	ret = cpu_suspend(0, exynos_cpu_suspend);
-	if (ret)
-		return ret;
-
-	s3c_pm_restore_uarts();
-
-	S3C_PMDBG("%s: wakeup stat: %08x\n", __func__,
-			pmu_raw_readl(S5P_WAKEUP_STAT));
-
-	s3c_pm_check_restore();
-
-	S3C_PMDBG("%s: resuming the system...\n", __func__);
-
-	return 0;
-}
-
-static int exynos_suspend_prepare(void)
-{
-	s3c_pm_check_prepare();
-
-	return 0;
-}
-
-static void exynos_suspend_finish(void)
-{
-	s3c_pm_check_cleanup();
-}
-
-static const struct platform_suspend_ops exynos_suspend_ops = {
-	.enter		= exynos_suspend_enter,
-	.prepare	= exynos_suspend_prepare,
-	.finish		= exynos_suspend_finish,
-	.valid		= suspend_valid_only_mem,
-};
-
-void __init exynos_pm_init(void)
-{
-	u32 tmp;
-
-	/* Platform-specific GIC callback */
-	gic_arch_extn.irq_set_wake = exynos_irq_set_wake;
-
-	/* All wakeup disable */
-	tmp = pmu_raw_readl(S5P_WAKEUP_MASK);
-	tmp |= ((0xFF << 8) | (0x1F << 1));
-	pmu_raw_writel(tmp, S5P_WAKEUP_MASK);
-
-	register_syscore_ops(&exynos_pm_syscore_ops);
-	suspend_set_ops(&exynos_suspend_ops);
-}
diff --git a/arch/arm/mach-exynos/pmu.c b/arch/arm/mach-exynos/pmu.c
index d8fa033..c15761c 100644
--- a/arch/arm/mach-exynos/pmu.c
+++ b/arch/arm/mach-exynos/pmu.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2011-2014 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com/
  *
  * EXYNOS - CPU PMU(Power Management Unit) support
@@ -10,12 +10,136 @@
  */
 
 #include <linux/io.h>
-#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
 
-#include "common.h"
+
+#include "exynos-pmu.h"
 #include "regs-pmu.h"
 
-static const struct exynos_pmu_conf *exynos_pmu_config;
+#define PMU_TABLE_END	(-1U)
+
+struct exynos_pmu_conf {
+	unsigned int offset;
+	u8 val[NUM_SYS_POWERDOWN];
+};
+
+struct exynos_pmu_data {
+	const struct exynos_pmu_conf *pmu_config;
+	const struct exynos_pmu_conf *pmu_config_extra;
+
+	void (*pmu_init)(void);
+	void (*powerdown_conf)(enum sys_powerdown);
+	void (*powerdown_conf_extra)(enum sys_powerdown);
+};
+
+struct exynos_pmu_context {
+	struct device *dev;
+	const struct exynos_pmu_data *pmu_data;
+};
+
+static void __iomem *pmu_base_addr;
+static struct exynos_pmu_context *pmu_context;
+
+static inline void pmu_raw_writel(u32 val, u32 offset)
+{
+	writel_relaxed(val, pmu_base_addr + offset);
+}
+
+static inline u32 pmu_raw_readl(u32 offset)
+{
+	return readl_relaxed(pmu_base_addr + offset);
+}
+
+static struct exynos_pmu_conf exynos3250_pmu_config[] = {
+	/* { .offset = offset, .val = { AFTR, W-AFTR, SLEEP } */
+	{ EXYNOS3_ARM_CORE0_SYS_PWR_REG,		{ 0x0, 0x0, 0x2} },
+	{ EXYNOS3_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ EXYNOS3_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+	{ EXYNOS3_ARM_CORE1_SYS_PWR_REG,		{ 0x0, 0x0, 0x2} },
+	{ EXYNOS3_DIS_IRQ_ARM_CORE1_LOCAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ EXYNOS3_DIS_IRQ_ARM_CORE1_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+	{ EXYNOS3_ISP_ARM_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
+	{ EXYNOS3_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ EXYNOS3_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ EXYNOS3_ARM_COMMON_SYS_PWR_REG,		{ 0x0, 0x0, 0x2} },
+	{ EXYNOS3_ARM_L2_SYS_PWR_REG,			{ 0x0, 0x0, 0x3} },
+	{ EXYNOS3_CMU_ACLKSTOP_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_CMU_SCLKSTOP_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_CMU_RESET_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_DRAM_FREQ_DOWN_SYS_PWR_REG,		{ 0x1, 0x1, 0x1} },
+	{ EXYNOS3_DDRPHY_DLLOFF_SYS_PWR_REG,		{ 0x1, 0x1, 0x1} },
+	{ EXYNOS3_LPDDR_PHY_DLL_LOCK_SYS_PWR_REG,	{ 0x1, 0x1, 0x1} },
+	{ EXYNOS3_CMU_ACLKSTOP_COREBLK_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
+	{ EXYNOS3_CMU_SCLKSTOP_COREBLK_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
+	{ EXYNOS3_CMU_RESET_COREBLK_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_APLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS3_MPLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS3_BPLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS3_VPLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_EPLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS3_UPLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x1, 0x1} },
+	{ EXYNOS3_EPLLUSER_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS3_MPLLUSER_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS3_BPLLUSER_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS3_CMU_CLKSTOP_CAM_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS3_CMU_CLKSTOP_MFC_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS3_CMU_CLKSTOP_G3D_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS3_CMU_CLKSTOP_LCD0_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS3_CMU_CLKSTOP_ISP_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS3_CMU_CLKSTOP_MAUDIO_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
+	{ EXYNOS3_CMU_RESET_CAM_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS3_CMU_RESET_MFC_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS3_CMU_RESET_G3D_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS3_CMU_RESET_LCD0_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS3_CMU_RESET_ISP_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS3_CMU_RESET_MAUDIO_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS3_TOP_BUS_SYS_PWR_REG,			{ 0x3, 0x0, 0x0} },
+	{ EXYNOS3_TOP_RETENTION_SYS_PWR_REG,		{ 0x1, 0x1, 0x1} },
+	{ EXYNOS3_TOP_PWR_SYS_PWR_REG,			{ 0x3, 0x3, 0x3} },
+	{ EXYNOS3_TOP_BUS_COREBLK_SYS_PWR_REG,		{ 0x3, 0x0, 0x0} },
+	{ EXYNOS3_TOP_RETENTION_COREBLK_SYS_PWR_REG,	{ 0x1, 0x1, 0x1} },
+	{ EXYNOS3_TOP_PWR_COREBLK_SYS_PWR_REG,		{ 0x3, 0x3, 0x3} },
+	{ EXYNOS3_LOGIC_RESET_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_OSCCLK_GATE_SYS_PWR_REG,		{ 0x1, 0x1, 0x1} },
+	{ EXYNOS3_LOGIC_RESET_COREBLK_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_OSCCLK_GATE_COREBLK_SYS_PWR_REG,	{ 0x1, 0x0, 0x1} },
+	{ EXYNOS3_PAD_RETENTION_DRAM_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_PAD_RETENTION_MAUDIO_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_PAD_RETENTION_GPIO_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_PAD_RETENTION_UART_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_PAD_RETENTION_MMC0_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_PAD_RETENTION_MMC1_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_PAD_RETENTION_MMC2_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_PAD_RETENTION_SPI_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_PAD_RETENTION_EBIA_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_PAD_RETENTION_EBIB_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_PAD_RETENTION_JTAG_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_PAD_ISOLATION_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_PAD_ALV_SEL_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_XUSBXTI_SYS_PWR_REG,			{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_XXTI_SYS_PWR_REG,			{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_EXT_REGULATOR_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_EXT_REGULATOR_COREBLK_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_GPIO_MODE_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_GPIO_MODE_MAUDIO_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_TOP_ASB_RESET_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_TOP_ASB_ISOLATION_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_TOP_ASB_RESET_COREBLK_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
+	{ EXYNOS3_TOP_ASB_ISOLATION_COREBLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+	{ EXYNOS3_CAM_SYS_PWR_REG,			{ 0x7, 0x0, 0x0} },
+	{ EXYNOS3_MFC_SYS_PWR_REG,			{ 0x7, 0x0, 0x0} },
+	{ EXYNOS3_G3D_SYS_PWR_REG,			{ 0x7, 0x0, 0x0} },
+	{ EXYNOS3_LCD0_SYS_PWR_REG,			{ 0x7, 0x0, 0x0} },
+	{ EXYNOS3_ISP_SYS_PWR_REG,			{ 0x7, 0x0, 0x0} },
+	{ EXYNOS3_MAUDIO_SYS_PWR_REG,			{ 0x7, 0x0, 0x0} },
+	{ EXYNOS3_CMU_SYSCLK_ISP_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ PMU_TABLE_END,},
+};
 
 static const struct exynos_pmu_conf exynos4210_pmu_config[] = {
 	/* { .offset = offset, .val = { AFTR, LPA, SLEEP } */
@@ -264,6 +388,7 @@ static const struct exynos_pmu_conf exynos5250_pmu_config[] = {
 	{ EXYNOS5_INTRAM_MEM_SYS_PWR_REG,		{ 0x3, 0x0, 0x0} },
 	{ EXYNOS5_INTROM_MEM_SYS_PWR_REG,		{ 0x3, 0x0, 0x0} },
 	{ EXYNOS5_JPEG_MEM_SYS_PWR_REG,			{ 0x3, 0x0, 0x0} },
+	{ EXYNOS5_JPEG_MEM_OPTION,			{ 0x10, 0x10, 0x0} },
 	{ EXYNOS5_HSI_MEM_SYS_PWR_REG,			{ 0x3, 0x0, 0x0} },
 	{ EXYNOS5_MCUIOP_MEM_SYS_PWR_REG,		{ 0x3, 0x0, 0x0} },
 	{ EXYNOS5_SATA_MEM_SYS_PWR_REG,			{ 0x3, 0x0, 0x0} },
@@ -315,6 +440,189 @@ static const struct exynos_pmu_conf exynos5250_pmu_config[] = {
 	{ PMU_TABLE_END,},
 };
 
+static struct exynos_pmu_conf exynos5420_pmu_config[] = {
+	/* { .offset = offset, .val = { AFTR, LPA, SLEEP } */
+	{ EXYNOS5_ARM_CORE0_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5_ARM_CORE1_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5_DIS_IRQ_ARM_CORE1_LOCAL_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5_DIS_IRQ_ARM_CORE1_CENTRAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_ARM_CORE2_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_DIS_IRQ_ARM_CORE2_LOCAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_DIS_IRQ_ARM_CORE2_CENTRAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_ARM_CORE3_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_DIS_IRQ_ARM_CORE3_LOCAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_DIS_IRQ_ARM_CORE3_CENTRAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_KFC_CORE0_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_DIS_IRQ_KFC_CORE0_LOCAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_DIS_IRQ_KFC_CORE0_CENTRAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_KFC_CORE1_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_DIS_IRQ_KFC_CORE1_LOCAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_DIS_IRQ_KFC_CORE1_CENTRAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_KFC_CORE2_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_DIS_IRQ_KFC_CORE2_LOCAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_DIS_IRQ_KFC_CORE2_CENTRAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_KFC_CORE3_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_DIS_IRQ_KFC_CORE3_LOCAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_DIS_IRQ_KFC_CORE3_CENTRAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5_ISP_ARM_SYS_PWR_REG,				{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5420_ARM_COMMON_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_KFC_COMMON_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5_ARM_L2_SYS_PWR_REG,				{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_KFC_L2_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5_CMU_ACLKSTOP_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_CMU_SCLKSTOP_SYS_PWR_REG,			{ 0x1, 0x0, 0x1} },
+	{ EXYNOS5_CMU_RESET_SYS_PWR_REG,			{ 0x1, 0x1, 0x0} },
+	{ EXYNOS5_CMU_ACLKSTOP_SYSMEM_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_CMU_SCLKSTOP_SYSMEM_SYS_PWR_REG,		{ 0x1, 0x0, 0x1} },
+	{ EXYNOS5_CMU_RESET_SYSMEM_SYS_PWR_REG,			{ 0x1, 0x1, 0x0} },
+	{ EXYNOS5_DRAM_FREQ_DOWN_SYS_PWR_REG,			{ 0x1, 0x0, 0x1} },
+	{ EXYNOS5_DDRPHY_DLLOFF_SYS_PWR_REG,			{ 0x1, 0x1, 0x1} },
+	{ EXYNOS5_DDRPHY_DLLLOCK_SYS_PWR_REG,			{ 0x1, 0x0, 0x1} },
+	{ EXYNOS5_APLL_SYSCLK_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_MPLL_SYSCLK_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_VPLL_SYSCLK_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_EPLL_SYSCLK_SYS_PWR_REG,			{ 0x1, 0x1, 0x0} },
+	{ EXYNOS5_BPLL_SYSCLK_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_CPLL_SYSCLK_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5420_DPLL_SYSCLK_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5420_IPLL_SYSCLK_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5420_KPLL_SYSCLK_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_MPLLUSER_SYSCLK_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_BPLLUSER_SYSCLK_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5420_RPLL_SYSCLK_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5420_SPLL_SYSCLK_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_TOP_BUS_SYS_PWR_REG,				{ 0x3, 0x0, 0x0} },
+	{ EXYNOS5_TOP_RETENTION_SYS_PWR_REG,			{ 0x1, 0x1, 0x1} },
+	{ EXYNOS5_TOP_PWR_SYS_PWR_REG,				{ 0x3, 0x3, 0x0} },
+	{ EXYNOS5_TOP_BUS_SYSMEM_SYS_PWR_REG,			{ 0x3, 0x0, 0x0} },
+	{ EXYNOS5_TOP_RETENTION_SYSMEM_SYS_PWR_REG,		{ 0x1, 0x0, 0x1} },
+	{ EXYNOS5_TOP_PWR_SYSMEM_SYS_PWR_REG,			{ 0x3, 0x0, 0x0} },
+	{ EXYNOS5_LOGIC_RESET_SYS_PWR_REG,			{ 0x1, 0x1, 0x0} },
+	{ EXYNOS5_OSCCLK_GATE_SYS_PWR_REG,			{ 0x1, 0x0, 0x1} },
+	{ EXYNOS5_LOGIC_RESET_SYSMEM_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_OSCCLK_GATE_SYSMEM_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5420_INTRAM_MEM_SYS_PWR_REG,			{ 0x3, 0x0, 0x3} },
+	{ EXYNOS5420_INTROM_MEM_SYS_PWR_REG,			{ 0x3, 0x0, 0x3} },
+	{ EXYNOS5_PAD_RETENTION_DRAM_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_PAD_RETENTION_MAU_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
+	{ EXYNOS5420_PAD_RETENTION_JTAG_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
+	{ EXYNOS5420_PAD_RETENTION_DRAM_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5420_PAD_RETENTION_UART_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5420_PAD_RETENTION_MMC0_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5420_PAD_RETENTION_MMC1_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5420_PAD_RETENTION_MMC2_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5420_PAD_RETENTION_HSI_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5420_PAD_RETENTION_EBIA_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5420_PAD_RETENTION_EBIB_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5420_PAD_RETENTION_SPI_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5420_PAD_RETENTION_DRAM_COREBLK_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_PAD_ISOLATION_SYS_PWR_REG,			{ 0x1, 0x1, 0x0} },
+	{ EXYNOS5_PAD_ISOLATION_SYSMEM_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_PAD_ALV_SEL_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_XUSBXTI_SYS_PWR_REG,				{ 0x1, 0x1, 0x0} },
+	{ EXYNOS5_XXTI_SYS_PWR_REG,				{ 0x1, 0x1, 0x0} },
+	{ EXYNOS5_EXT_REGULATOR_SYS_PWR_REG,			{ 0x1, 0x1, 0x0} },
+	{ EXYNOS5_GPIO_MODE_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_GPIO_MODE_SYSMEM_SYS_PWR_REG,			{ 0x1, 0x1, 0x0} },
+	{ EXYNOS5_GPIO_MODE_MAU_SYS_PWR_REG,			{ 0x1, 0x1, 0x0} },
+	{ EXYNOS5_TOP_ASB_RESET_SYS_PWR_REG,			{ 0x1, 0x1, 0x0} },
+	{ EXYNOS5_TOP_ASB_ISOLATION_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
+	{ EXYNOS5_GSCL_SYS_PWR_REG,				{ 0x7, 0x0, 0x0} },
+	{ EXYNOS5_ISP_SYS_PWR_REG,				{ 0x7, 0x0, 0x0} },
+	{ EXYNOS5_MFC_SYS_PWR_REG,				{ 0x7, 0x0, 0x0} },
+	{ EXYNOS5_G3D_SYS_PWR_REG,				{ 0x7, 0x0, 0x0} },
+	{ EXYNOS5420_DISP1_SYS_PWR_REG,				{ 0x7, 0x0, 0x0} },
+	{ EXYNOS5420_MAU_SYS_PWR_REG,				{ 0x7, 0x7, 0x0} },
+	{ EXYNOS5420_G2D_SYS_PWR_REG,				{ 0x7, 0x0, 0x0} },
+	{ EXYNOS5420_MSC_SYS_PWR_REG,				{ 0x7, 0x0, 0x0} },
+	{ EXYNOS5420_FSYS_SYS_PWR_REG,				{ 0x7, 0x0, 0x0} },
+	{ EXYNOS5420_FSYS2_SYS_PWR_REG,				{ 0x7, 0x0, 0x0} },
+	{ EXYNOS5420_PSGEN_SYS_PWR_REG,				{ 0x7, 0x0, 0x0} },
+	{ EXYNOS5420_PERIC_SYS_PWR_REG,				{ 0x7, 0x0, 0x0} },
+	{ EXYNOS5420_WCORE_SYS_PWR_REG,				{ 0x7, 0x0, 0x0} },
+	{ EXYNOS5_CMU_CLKSTOP_GSCL_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5_CMU_CLKSTOP_ISP_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5_CMU_CLKSTOP_MFC_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5_CMU_CLKSTOP_G3D_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_CMU_CLKSTOP_DISP1_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_CMU_CLKSTOP_MAU_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_CMU_CLKSTOP_G2D_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_CMU_CLKSTOP_MSC_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_CMU_CLKSTOP_FSYS_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_CMU_CLKSTOP_PSGEN_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_CMU_CLKSTOP_PERIC_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_CMU_CLKSTOP_WCORE_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5_CMU_SYSCLK_GSCL_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5_CMU_SYSCLK_ISP_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5_CMU_SYSCLK_MFC_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5_CMU_SYSCLK_G3D_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_CMU_SYSCLK_DISP1_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_CMU_SYSCLK_MAU_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_CMU_SYSCLK_G2D_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_CMU_SYSCLK_MSC_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_CMU_SYSCLK_FSYS_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_CMU_SYSCLK_FSYS2_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_CMU_SYSCLK_PSGEN_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_CMU_SYSCLK_PERIC_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_CMU_SYSCLK_WCORE_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_CMU_RESET_FSYS2_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_CMU_RESET_PSGEN_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_CMU_RESET_PERIC_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_CMU_RESET_WCORE_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5_CMU_RESET_GSCL_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5_CMU_RESET_ISP_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5_CMU_RESET_MFC_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5_CMU_RESET_G3D_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_CMU_RESET_DISP1_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_CMU_RESET_MAU_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_CMU_RESET_G2D_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_CMU_RESET_MSC_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
+	{ EXYNOS5420_CMU_RESET_FSYS_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
+	{ PMU_TABLE_END,},
+};
+
+static unsigned int const exynos3250_list_feed[] = {
+	EXYNOS3_ARM_CORE_OPTION(0),
+	EXYNOS3_ARM_CORE_OPTION(1),
+	EXYNOS3_ARM_CORE_OPTION(2),
+	EXYNOS3_ARM_CORE_OPTION(3),
+	EXYNOS3_ARM_COMMON_OPTION,
+	EXYNOS3_TOP_PWR_OPTION,
+	EXYNOS3_CORE_TOP_PWR_OPTION,
+	S5P_CAM_OPTION,
+	S5P_MFC_OPTION,
+	S5P_G3D_OPTION,
+	S5P_LCD0_OPTION,
+	S5P_ISP_OPTION,
+};
+
+static void exynos3250_powerdown_conf_extra(enum sys_powerdown mode)
+{
+	unsigned int i;
+	unsigned int tmp;
+
+	/* Enable only SC_FEEDBACK */
+	for (i = 0; i < ARRAY_SIZE(exynos3250_list_feed); i++) {
+		tmp = pmu_raw_readl(exynos3250_list_feed[i]);
+		tmp &= ~(EXYNOS3_OPTION_USE_SC_COUNTER);
+		tmp |= EXYNOS3_OPTION_USE_SC_FEEDBACK;
+		pmu_raw_writel(tmp, exynos3250_list_feed[i]);
+	}
+
+	if (mode != SYS_SLEEP)
+		return;
+
+	pmu_raw_writel(XUSBXTI_DURATION, EXYNOS3_XUSBXTI_DURATION);
+	pmu_raw_writel(XXTI_DURATION, EXYNOS3_XXTI_DURATION);
+	pmu_raw_writel(EXT_REGULATOR_DURATION, EXYNOS3_EXT_REGULATOR_DURATION);
+	pmu_raw_writel(EXT_REGULATOR_COREBLK_DURATION,
+		       EXYNOS3_EXT_REGULATOR_COREBLK_DURATION);
+}
+
 static unsigned int const exynos5_list_both_cnt_feed[] = {
 	EXYNOS5_ARM_CORE0_OPTION,
 	EXYNOS5_ARM_CORE1_OPTION,
@@ -335,7 +643,76 @@ static unsigned int const exynos5_list_disable_wfi_wfe[] = {
 	EXYNOS5_ISP_ARM_OPTION,
 };
 
-static void exynos5_init_pmu(void)
+static unsigned int const exynos5420_list_disable_pmu_reg[] = {
+	EXYNOS5_CMU_CLKSTOP_GSCL_SYS_PWR_REG,
+	EXYNOS5_CMU_CLKSTOP_ISP_SYS_PWR_REG,
+	EXYNOS5_CMU_CLKSTOP_G3D_SYS_PWR_REG,
+	EXYNOS5420_CMU_CLKSTOP_DISP1_SYS_PWR_REG,
+	EXYNOS5420_CMU_CLKSTOP_MAU_SYS_PWR_REG,
+	EXYNOS5420_CMU_CLKSTOP_G2D_SYS_PWR_REG,
+	EXYNOS5420_CMU_CLKSTOP_MSC_SYS_PWR_REG,
+	EXYNOS5420_CMU_CLKSTOP_FSYS_SYS_PWR_REG,
+	EXYNOS5420_CMU_CLKSTOP_PSGEN_SYS_PWR_REG,
+	EXYNOS5420_CMU_CLKSTOP_PERIC_SYS_PWR_REG,
+	EXYNOS5420_CMU_CLKSTOP_WCORE_SYS_PWR_REG,
+	EXYNOS5_CMU_SYSCLK_GSCL_SYS_PWR_REG,
+	EXYNOS5_CMU_SYSCLK_ISP_SYS_PWR_REG,
+	EXYNOS5_CMU_SYSCLK_G3D_SYS_PWR_REG,
+	EXYNOS5420_CMU_SYSCLK_DISP1_SYS_PWR_REG,
+	EXYNOS5420_CMU_SYSCLK_MAU_SYS_PWR_REG,
+	EXYNOS5420_CMU_SYSCLK_G2D_SYS_PWR_REG,
+	EXYNOS5420_CMU_SYSCLK_MSC_SYS_PWR_REG,
+	EXYNOS5420_CMU_SYSCLK_FSYS_SYS_PWR_REG,
+	EXYNOS5420_CMU_SYSCLK_FSYS2_SYS_PWR_REG,
+	EXYNOS5420_CMU_SYSCLK_PSGEN_SYS_PWR_REG,
+	EXYNOS5420_CMU_SYSCLK_PERIC_SYS_PWR_REG,
+	EXYNOS5420_CMU_SYSCLK_WCORE_SYS_PWR_REG,
+	EXYNOS5420_CMU_RESET_FSYS2_SYS_PWR_REG,
+	EXYNOS5420_CMU_RESET_PSGEN_SYS_PWR_REG,
+	EXYNOS5420_CMU_RESET_PERIC_SYS_PWR_REG,
+	EXYNOS5420_CMU_RESET_WCORE_SYS_PWR_REG,
+	EXYNOS5_CMU_RESET_GSCL_SYS_PWR_REG,
+	EXYNOS5_CMU_RESET_ISP_SYS_PWR_REG,
+	EXYNOS5_CMU_RESET_G3D_SYS_PWR_REG,
+	EXYNOS5420_CMU_RESET_DISP1_SYS_PWR_REG,
+	EXYNOS5420_CMU_RESET_MAU_SYS_PWR_REG,
+	EXYNOS5420_CMU_RESET_G2D_SYS_PWR_REG,
+	EXYNOS5420_CMU_RESET_MSC_SYS_PWR_REG,
+	EXYNOS5420_CMU_RESET_FSYS_SYS_PWR_REG,
+};
+
+static void exynos5_power_off(void)
+{
+	unsigned int tmp;
+
+	pr_info("Power down.\n");
+	tmp = pmu_raw_readl(EXYNOS_PS_HOLD_CONTROL);
+	tmp ^= (1 << 8);
+	pmu_raw_writel(tmp, EXYNOS_PS_HOLD_CONTROL);
+
+	/* Wait a little so we don't give a false warning below */
+	mdelay(100);
+
+	pr_err("Power down failed, please power off system manually.\n");
+	while (1)
+		;
+}
+
+void exynos5420_powerdown_conf(enum sys_powerdown mode)
+{
+	u32 this_cluster;
+
+	this_cluster = MPIDR_AFFINITY_LEVEL(read_cpuid_mpidr(), 1);
+
+	/*
+	 * set the cluster id to IROM register to ensure that we wake
+	 * up with the current cluster.
+	 */
+	pmu_raw_writel(this_cluster, EXYNOS_IROM_DATA2);
+}
+
+
+static void exynos5_powerdown_conf(enum sys_powerdown mode)
 {
 	unsigned int i;
 	unsigned int tmp;
@@ -343,7 +720,7 @@ static void exynos5_init_pmu(void)
 	/*
 	 * Enable both SC_FEEDBACK and SC_COUNTER
 	 */
-	for (i = 0 ; i < ARRAY_SIZE(exynos5_list_both_cnt_feed) ; i++) {
+	for (i = 0; i < ARRAY_SIZE(exynos5_list_both_cnt_feed); i++) {
 		tmp = pmu_raw_readl(exynos5_list_both_cnt_feed[i]);
 		tmp |= (EXYNOS5_USE_SC_FEEDBACK |
 			EXYNOS5_USE_SC_COUNTER);
@@ -360,7 +737,7 @@ static void exynos5_init_pmu(void)
 	/*
 	 * Disable WFI/WFE on XXX_OPTION
 	 */
-	for (i = 0 ; i < ARRAY_SIZE(exynos5_list_disable_wfi_wfe) ; i++) {
+	for (i = 0; i < ARRAY_SIZE(exynos5_list_disable_wfi_wfe); i++) {
 		tmp = pmu_raw_readl(exynos5_list_disable_wfi_wfe[i]);
 		tmp &= ~(EXYNOS5_OPTION_USE_STANDBYWFE |
 			 EXYNOS5_OPTION_USE_STANDBYWFI);
@@ -372,51 +749,257 @@ void exynos_sys_powerdown_conf(enum sys_powerdown mode)
 {
 	unsigned int i;
 
-	if (soc_is_exynos5250())
-		exynos5_init_pmu();
+	const struct exynos_pmu_data *pmu_data = pmu_context->pmu_data;
+
+	if (pmu_data->powerdown_conf)
+		pmu_data->powerdown_conf(mode);
+
+	if (pmu_data->pmu_config) {
+		for (i = 0; (pmu_data->pmu_config[i].offset != PMU_TABLE_END); i++)
+			pmu_raw_writel(pmu_data->pmu_config[i].val[mode],
+					pmu_data->pmu_config[i].offset);
+	}
 
-	for (i = 0; (exynos_pmu_config[i].offset != PMU_TABLE_END) ; i++)
-		pmu_raw_writel(exynos_pmu_config[i].val[mode],
-				exynos_pmu_config[i].offset);
+	if (pmu_data->powerdown_conf_extra)
+		pmu_data->powerdown_conf_extra(mode);
 
-	if (soc_is_exynos4412()) {
-		for (i = 0; exynos4412_pmu_config[i].offset != PMU_TABLE_END ; i++)
-			pmu_raw_writel(exynos4412_pmu_config[i].val[mode],
-					exynos4412_pmu_config[i].offset);
+	if (pmu_data->pmu_config_extra) {
+		for (i = 0; pmu_data->pmu_config_extra[i].offset != PMU_TABLE_END; i++)
+			pmu_raw_writel(pmu_data->pmu_config_extra[i].val[mode],
+					pmu_data->pmu_config_extra[i].offset);
 	}
 }
 
-static int __init exynos_pmu_init(void)
+static void exynos3250_pmu_init(void)
+{
+	unsigned int value;
+
+	/*
+	 * To prevent from issuing new bus request form L2 memory system
+	 * If core status is power down, should be set '1' to L2 power down
+	 */
+	value = pmu_raw_readl(EXYNOS3_ARM_COMMON_OPTION);
+	value |= EXYNOS3_OPTION_SKIP_DEACTIVATE_ACEACP_IN_PWDN;
+	pmu_raw_writel(value, EXYNOS3_ARM_COMMON_OPTION);
+
+	/* Enable USE_STANDBY_WFI for all CORE */
+	pmu_raw_writel(S5P_USE_STANDBY_WFI_ALL, S5P_CENTRAL_SEQ_OPTION);
+
+	/*
+	 * Set PSHOLD port for output high
+	 */
+	value = pmu_raw_readl(S5P_PS_HOLD_CONTROL);
+	value |= S5P_PS_HOLD_OUTPUT_HIGH;
+	pmu_raw_writel(value, S5P_PS_HOLD_CONTROL);
+
+	/*
+	 * Enable signal for PSHOLD port
+	 */
+	value = pmu_raw_readl(S5P_PS_HOLD_CONTROL);
+	value |= S5P_PS_HOLD_EN;
+	pmu_raw_writel(value, S5P_PS_HOLD_CONTROL);
+}
+
+static void exynos5250_pmu_init(void)
 {
 	unsigned int value;
+	/*
+	 * When SYS_WDTRESET is set, watchdog timer reset request
+	 * is ignored by power management unit.
+	 */
+	value = pmu_raw_readl(EXYNOS5_AUTO_WDTRESET_DISABLE);
+	value &= ~EXYNOS5_SYS_WDTRESET;
+	pmu_raw_writel(value, EXYNOS5_AUTO_WDTRESET_DISABLE);
+
+	value = pmu_raw_readl(EXYNOS5_MASK_WDTRESET_REQUEST);
+	value &= ~EXYNOS5_SYS_WDTRESET;
+	pmu_raw_writel(value, EXYNOS5_MASK_WDTRESET_REQUEST);
+}
+
+static void exynos5420_pmu_init(void)
+{
+	unsigned int value;
+	int i;
+
+	/*
+	 * Set the CMU_RESET, CMU_SYSCLK and CMU_CLKSTOP registers
+	 * for local power blocks to Low initially as per Table 8-4:
+	 * "System-Level Power-Down Configuration Registers".
+	 */
+	for (i = 0; i < ARRAY_SIZE(exynos5420_list_disable_pmu_reg); i++)
+		pmu_raw_writel(0, exynos5420_list_disable_pmu_reg[i]);
+
+	/* Enable USE_STANDBY_WFI for all CORE */
+	pmu_raw_writel(EXYNOS5420_USE_STANDBY_WFI_ALL, S5P_CENTRAL_SEQ_OPTION);
+
+	value  = pmu_raw_readl(EXYNOS_L2_OPTION(0));
+	value &= ~EXYNOS5_USE_RETENTION;
+	pmu_raw_writel(value, EXYNOS_L2_OPTION(0));
+
+	value = pmu_raw_readl(EXYNOS_L2_OPTION(1));
+	value &= ~EXYNOS5_USE_RETENTION;
+	pmu_raw_writel(value, EXYNOS_L2_OPTION(1));
+
+	/*
+	 * If L2_COMMON is turned off, clocks related to ATB async
+	 * bridge are gated. Thus, when ISP power is gated, LPI
+	 * may get stuck.
+	 */
+	value = pmu_raw_readl(EXYNOS5420_LPI_MASK);
+	value |= EXYNOS5420_ATB_ISP_ARM;
+	pmu_raw_writel(value, EXYNOS5420_LPI_MASK);
+
+	value  = pmu_raw_readl(EXYNOS5420_LPI_MASK1);
+	value |= EXYNOS5420_ATB_KFC;
+	pmu_raw_writel(value, EXYNOS5420_LPI_MASK1);
+
+	/* Prevent issue of new bus request from L2 memory */
+	value = pmu_raw_readl(EXYNOS5420_ARM_COMMON_OPTION);
+	value |= EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN;
+	pmu_raw_writel(value, EXYNOS5420_ARM_COMMON_OPTION);
+
+	value = pmu_raw_readl(EXYNOS5420_KFC_COMMON_OPTION);
+	value |= EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN;
+	pmu_raw_writel(value, EXYNOS5420_KFC_COMMON_OPTION);
+
+	/* This setting is to reduce suspend/resume time */
+	pmu_raw_writel(DUR_WAIT_RESET, EXYNOS5420_LOGIC_RESET_DURATION3);
+
+	/* Serialized CPU wakeup of Eagle */
+	pmu_raw_writel(SPREAD_ENABLE, EXYNOS5420_ARM_INTR_SPREAD_ENABLE);
+
+	pmu_raw_writel(SPREAD_USE_STANDWFI,
+			EXYNOS5420_ARM_INTR_SPREAD_USE_STANDBYWFI);
+
+	pmu_raw_writel(0x1, EXYNOS5420_UP_SCHEDULER);
+
+	pm_power_off = exynos5_power_off;
+	pr_info("EXYNOS5420 PMU initialized\n");
+}
+
+static int pmu_restart_notify(struct notifier_block *this,
+		unsigned long code, void *unused)
+{
+	pmu_raw_writel(0x1, EXYNOS_SWRESET);
+
+	return NOTIFY_DONE;
+}
+
+static const struct exynos_pmu_data exynos3250_pmu_data = {
+	.pmu_config	= exynos3250_pmu_config,
+	.pmu_init	= exynos3250_pmu_init,
+	.powerdown_conf_extra	= exynos3250_powerdown_conf_extra,
+};
 
-	exynos_pmu_config = exynos4210_pmu_config;
-
-	if (soc_is_exynos4210()) {
-		exynos_pmu_config = exynos4210_pmu_config;
-		pr_info("EXYNOS4210 PMU Initialize\n");
-	} else if (soc_is_exynos4212() || soc_is_exynos4412()) {
-		exynos_pmu_config = exynos4x12_pmu_config;
-		pr_info("EXYNOS4x12 PMU Initialize\n");
-	} else if (soc_is_exynos5250()) {
-		/*
-		 * When SYS_WDTRESET is set, watchdog timer reset request
-		 * is ignored by power management unit.
-		 */
-		value = pmu_raw_readl(EXYNOS5_AUTO_WDTRESET_DISABLE);
-		value &= ~EXYNOS5_SYS_WDTRESET;
-		pmu_raw_writel(value, EXYNOS5_AUTO_WDTRESET_DISABLE);
-
-		value = pmu_raw_readl(EXYNOS5_MASK_WDTRESET_REQUEST);
-		value &= ~EXYNOS5_SYS_WDTRESET;
-		pmu_raw_writel(value, EXYNOS5_MASK_WDTRESET_REQUEST);
-
-		exynos_pmu_config = exynos5250_pmu_config;
-		pr_info("EXYNOS5250 PMU Initialize\n");
-	} else {
-		pr_info("EXYNOS: PMU not supported\n");
+static const struct exynos_pmu_data exynos4210_pmu_data = {
+	.pmu_config	= exynos4210_pmu_config,
+};
+
+static const struct exynos_pmu_data exynos4212_pmu_data = {
+	.pmu_config	= exynos4x12_pmu_config,
+};
+
+static const struct exynos_pmu_data exynos4412_pmu_data = {
+	.pmu_config		= exynos4x12_pmu_config,
+	.pmu_config_extra	= exynos4412_pmu_config,
+};
+
+static const struct exynos_pmu_data exynos5250_pmu_data = {
+	.pmu_config	= exynos5250_pmu_config,
+	.pmu_init	= exynos5250_pmu_init,
+	.powerdown_conf	= exynos5_powerdown_conf,
+};
+
+static struct exynos_pmu_data exynos5420_pmu_data = {
+	.pmu_config	= exynos5420_pmu_config,
+	.pmu_init	= exynos5420_pmu_init,
+	.powerdown_conf	= exynos5420_powerdown_conf,
+};
+
+/*
+ * PMU platform driver and devicetree bindings.
+ */
+static const struct of_device_id exynos_pmu_of_device_ids[] = {
+	{
+		.compatible = "samsung,exynos3250-pmu",
+		.data = &exynos3250_pmu_data,
+	}, {
+		.compatible = "samsung,exynos4210-pmu",
+		.data = &exynos4210_pmu_data,
+	}, {
+		.compatible = "samsung,exynos4212-pmu",
+		.data = &exynos4212_pmu_data,
+	}, {
+		.compatible = "samsung,exynos4412-pmu",
+		.data = &exynos4412_pmu_data,
+	}, {
+		.compatible = "samsung,exynos5250-pmu",
+		.data = &exynos5250_pmu_data,
+	}, {
+		.compatible = "samsung,exynos5420-pmu",
+		.data = &exynos5420_pmu_data,
+	},
+	{ /*sentinel*/ },
+};
+
+/*
+ * Exynos PMU restart notifier, handles restart functionality
+ */
+static struct notifier_block pmu_restart_handler = {
+	.notifier_call = pmu_restart_notify,
+	.priority = 128,
+};
+
+static int exynos_pmu_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *match;
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	int ret;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	pmu_base_addr = devm_ioremap_resource(dev, res);
+	if (IS_ERR(pmu_base_addr))
+		return PTR_ERR(pmu_base_addr);
+
+	pmu_context = devm_kzalloc(&pdev->dev,
+			sizeof(struct exynos_pmu_context),
+			GFP_KERNEL);
+	if (!pmu_context) {
+		dev_err(dev, "Cannot allocate memory.\n");
+		return -ENOMEM;
 	}
+	pmu_context->dev = dev;
+
+	match = of_match_node(exynos_pmu_of_device_ids, dev->of_node);
+
+	pmu_context->pmu_data = match->data;
+
+	if (pmu_context->pmu_data->pmu_init)
+		pmu_context->pmu_data->pmu_init();
+
+	platform_set_drvdata(pdev, pmu_context);
 
+	ret = register_restart_handler(&pmu_restart_handler);
+	if (ret)
+		dev_warn(dev, "can't register restart handler err=%d\n", ret);
+
+	dev_dbg(dev, "Exynos PMU Driver probe done\n");
 	return 0;
 }
-arch_initcall(exynos_pmu_init);
+
+static struct platform_driver exynos_pmu_driver = {
+	.driver  = {
+		.name   = "exynos-pmu",
+		.owner	= THIS_MODULE,
+		.of_match_table = exynos_pmu_of_device_ids,
+	},
+	.probe = exynos_pmu_probe,
+};
+
+static int __init exynos_pmu_init(void)
+{
+	return platform_driver_register(&exynos_pmu_driver);
+
+}
+postcore_initcall(exynos_pmu_init);
diff --git a/arch/arm/mach-exynos/regs-pmu.h b/arch/arm/mach-exynos/regs-pmu.h
index 4e9b444..b5f4406 100644
--- a/arch/arm/mach-exynos/regs-pmu.h
+++ b/arch/arm/mach-exynos/regs-pmu.h
@@ -19,9 +19,24 @@
 #define S5P_CENTRAL_SEQ_OPTION			0x0208
 
 #define S5P_USE_STANDBY_WFI0			(1 << 16)
+#define S5P_USE_STANDBY_WFI1			(1 << 17)
+#define S5P_USE_STANDBY_WFI2			(1 << 19)
+#define S5P_USE_STANDBY_WFI3			(1 << 20)
 #define S5P_USE_STANDBY_WFE0			(1 << 24)
+#define S5P_USE_STANDBY_WFE1			(1 << 25)
+#define S5P_USE_STANDBY_WFE2			(1 << 27)
+#define S5P_USE_STANDBY_WFE3			(1 << 28)
+
+#define S5P_USE_STANDBY_WFI_ALL \
+	(S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFI1 | \
+	 S5P_USE_STANDBY_WFI2 | S5P_USE_STANDBY_WFI3 | \
+	 S5P_USE_STANDBY_WFE0 | S5P_USE_STANDBY_WFE1 | \
+	 S5P_USE_STANDBY_WFE2 | S5P_USE_STANDBY_WFE3)
+
 #define S5P_USE_DELAYED_RESET_ASSERTION		BIT(12)
 
+#define EXYNOS_CORE_PO_RESET(n)			((1 << 4) << n)
+#define EXYNOS_WAKEUP_FROM_LOWPWR		(1 << 28)
 #define EXYNOS_SWRESET				0x0400
 #define EXYNOS5440_SWRESET			0x00C4
 
@@ -36,6 +51,7 @@
 #define S5P_INFORM7				0x081C
 #define S5P_PMU_SPARE3				0x090C
 
+#define EXYNOS_IROM_DATA2			0x0988
 #define S5P_ARM_CORE0_LOWPWR			0x1000
 #define S5P_DIS_IRQ_CORE0			0x1004
 #define S5P_DIS_IRQ_CENTRAL0			0x1008
@@ -118,6 +134,31 @@
 #define EXYNOS_COMMON_OPTION(_nr)		\
 			(EXYNOS_COMMON_CONFIGURATION(_nr) + 0x8)
 
+#define EXYNOS_CORE_LOCAL_PWR_EN		0x3
+
+#define EXYNOS_ARM_COMMON_STATUS		0x2504
+#define EXYNOS_COMMON_OPTION(_nr)		\
+			(EXYNOS_COMMON_CONFIGURATION(_nr) + 0x8)
+
+#define EXYNOS_ARM_L2_CONFIGURATION		0x2600
+#define EXYNOS_L2_CONFIGURATION(_nr)		\
+			(EXYNOS_ARM_L2_CONFIGURATION + ((_nr) * 0x80))
+#define EXYNOS_L2_STATUS(_nr)			\
+			(EXYNOS_L2_CONFIGURATION(_nr) + 0x4)
+#define EXYNOS_L2_OPTION(_nr)			\
+			(EXYNOS_L2_CONFIGURATION(_nr) + 0x8)
+#define EXYNOS_L2_COMMON_PWR_EN			0x3
+
+#define EXYNOS_ARM_CORE_X_STATUS_OFFSET		0x4
+
+#define EXYNOS5_APLL_SYSCLK_CONFIGURATION	0x2A00
+#define EXYNOS5_APLL_SYSCLK_STATUS		0x2A04
+
+#define EXYNOS5_ARM_L2_OPTION			0x2608
+#define EXYNOS5_USE_RETENTION			BIT(4)
+
+#define EXYNOS5_L2RSTDISABLE_VALUE		BIT(3)
+
 #define S5P_PAD_RET_MAUDIO_OPTION		0x3028
 #define S5P_PAD_RET_GPIO_OPTION			0x3108
 #define S5P_PAD_RET_UART_OPTION			0x3128
@@ -126,7 +167,19 @@
 #define S5P_PAD_RET_EBIA_OPTION			0x3188
 #define S5P_PAD_RET_EBIB_OPTION			0x31A8
 
+#define S5P_PS_HOLD_CONTROL			0x330C
+#define S5P_PS_HOLD_EN				(1 << 31)
+#define S5P_PS_HOLD_OUTPUT_HIGH			(3 << 8)
+
+#define S5P_CAM_OPTION				0x3C08
+#define S5P_MFC_OPTION				0x3C48
+#define S5P_G3D_OPTION				0x3C68
+#define S5P_LCD0_OPTION				0x3C88
+#define S5P_LCD1_OPTION				0x3CA8
+#define S5P_ISP_OPTION				S5P_LCD1_OPTION
+
 #define S5P_CORE_LOCAL_PWR_EN			0x3
+#define S5P_CORE_WAKEUP_FROM_LOCAL_CFG		(0x3 << 8)
 
 /* Only for EXYNOS4210 */
 #define S5P_CMU_CLKSTOP_LCD1_LOWPWR	0x1154
@@ -185,11 +238,116 @@
 #define S5P_DIS_IRQ_CORE3			0x1034
 #define S5P_DIS_IRQ_CENTRAL3			0x1038
 
+/* Only for EXYNOS3XXX */
+#define EXYNOS3_ARM_CORE0_SYS_PWR_REG			0x1000
+#define EXYNOS3_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG	0x1004
+#define EXYNOS3_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG	0x1008
+#define EXYNOS3_ARM_CORE1_SYS_PWR_REG			0x1010
+#define EXYNOS3_DIS_IRQ_ARM_CORE1_LOCAL_SYS_PWR_REG	0x1014
+#define EXYNOS3_DIS_IRQ_ARM_CORE1_CENTRAL_SYS_PWR_REG	0x1018
+#define EXYNOS3_ISP_ARM_SYS_PWR_REG			0x1050
+#define EXYNOS3_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG	0x1054
+#define EXYNOS3_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG	0x1058
+#define EXYNOS3_ARM_COMMON_SYS_PWR_REG			0x1080
+#define EXYNOS3_ARM_L2_SYS_PWR_REG			0x10C0
+#define EXYNOS3_CMU_ACLKSTOP_SYS_PWR_REG		0x1100
+#define EXYNOS3_CMU_SCLKSTOP_SYS_PWR_REG		0x1104
+#define EXYNOS3_CMU_RESET_SYS_PWR_REG			0x110C
+#define EXYNOS3_CMU_ACLKSTOP_COREBLK_SYS_PWR_REG	0x1110
+#define EXYNOS3_CMU_SCLKSTOP_COREBLK_SYS_PWR_REG	0x1114
+#define EXYNOS3_CMU_RESET_COREBLK_SYS_PWR_REG		0x111C
+#define EXYNOS3_APLL_SYSCLK_SYS_PWR_REG			0x1120
+#define EXYNOS3_MPLL_SYSCLK_SYS_PWR_REG			0x1124
+#define EXYNOS3_VPLL_SYSCLK_SYS_PWR_REG			0x1128
+#define EXYNOS3_EPLL_SYSCLK_SYS_PWR_REG			0x112C
+#define EXYNOS3_MPLLUSER_SYSCLK_SYS_PWR_REG		0x1130
+#define EXYNOS3_BPLLUSER_SYSCLK_SYS_PWR_REG		0x1134
+#define EXYNOS3_EPLLUSER_SYSCLK_SYS_PWR_REG		0x1138
+#define EXYNOS3_CMU_CLKSTOP_CAM_SYS_PWR_REG		0x1140
+#define EXYNOS3_CMU_CLKSTOP_MFC_SYS_PWR_REG		0x1148
+#define EXYNOS3_CMU_CLKSTOP_G3D_SYS_PWR_REG		0x114C
+#define EXYNOS3_CMU_CLKSTOP_LCD0_SYS_PWR_REG		0x1150
+#define EXYNOS3_CMU_CLKSTOP_ISP_SYS_PWR_REG		0x1154
+#define EXYNOS3_CMU_CLKSTOP_MAUDIO_SYS_PWR_REG		0x1158
+#define EXYNOS3_CMU_RESET_CAM_SYS_PWR_REG		0x1160
+#define EXYNOS3_CMU_RESET_MFC_SYS_PWR_REG		0x1168
+#define EXYNOS3_CMU_RESET_G3D_SYS_PWR_REG		0x116C
+#define EXYNOS3_CMU_RESET_LCD0_SYS_PWR_REG		0x1170
+#define EXYNOS3_CMU_RESET_ISP_SYS_PWR_REG		0x1174
+#define EXYNOS3_CMU_RESET_MAUDIO_SYS_PWR_REG		0x1178
+#define EXYNOS3_TOP_BUS_SYS_PWR_REG			0x1180
+#define EXYNOS3_TOP_RETENTION_SYS_PWR_REG		0x1184
+#define EXYNOS3_TOP_PWR_SYS_PWR_REG			0x1188
+#define EXYNOS3_TOP_BUS_COREBLK_SYS_PWR_REG		0x1190
+#define EXYNOS3_TOP_RETENTION_COREBLK_SYS_PWR_REG	0x1194
+#define EXYNOS3_TOP_PWR_COREBLK_SYS_PWR_REG		0x1198
+#define EXYNOS3_LOGIC_RESET_SYS_PWR_REG			0x11A0
+#define EXYNOS3_OSCCLK_GATE_SYS_PWR_REG			0x11A4
+#define EXYNOS3_LOGIC_RESET_COREBLK_SYS_PWR_REG		0x11B0
+#define EXYNOS3_OSCCLK_GATE_COREBLK_SYS_PWR_REG		0x11B4
+#define EXYNOS3_PAD_RETENTION_DRAM_SYS_PWR_REG		0x1200
+#define EXYNOS3_PAD_RETENTION_MAUDIO_SYS_PWR_REG	0x1204
+#define EXYNOS3_PAD_RETENTION_SPI_SYS_PWR_REG		0x1208
+#define EXYNOS3_PAD_RETENTION_MMC2_SYS_PWR_REG		0x1218
+#define EXYNOS3_PAD_RETENTION_GPIO_SYS_PWR_REG		0x1220
+#define EXYNOS3_PAD_RETENTION_UART_SYS_PWR_REG		0x1224
+#define EXYNOS3_PAD_RETENTION_MMC0_SYS_PWR_REG		0x1228
+#define EXYNOS3_PAD_RETENTION_MMC1_SYS_PWR_REG		0x122C
+#define EXYNOS3_PAD_RETENTION_EBIA_SYS_PWR_REG		0x1230
+#define EXYNOS3_PAD_RETENTION_EBIB_SYS_PWR_REG		0x1234
+#define EXYNOS3_PAD_RETENTION_JTAG_SYS_PWR_REG		0x1238
+#define EXYNOS3_PAD_ISOLATION_SYS_PWR_REG		0x1240
+#define EXYNOS3_PAD_ALV_SEL_SYS_PWR_REG			0x1260
+#define EXYNOS3_XUSBXTI_SYS_PWR_REG			0x1280
+#define EXYNOS3_XXTI_SYS_PWR_REG			0x1284
+#define EXYNOS3_EXT_REGULATOR_SYS_PWR_REG		0x12C0
+#define EXYNOS3_EXT_REGULATOR_COREBLK_SYS_PWR_REG	0x12C4
+#define EXYNOS3_GPIO_MODE_SYS_PWR_REG			0x1300
+#define EXYNOS3_GPIO_MODE_MAUDIO_SYS_PWR_REG		0x1340
+#define EXYNOS3_TOP_ASB_RESET_SYS_PWR_REG		0x1344
+#define EXYNOS3_TOP_ASB_ISOLATION_SYS_PWR_REG		0x1348
+#define EXYNOS3_TOP_ASB_RESET_COREBLK_SYS_PWR_REG	0x1350
+#define EXYNOS3_TOP_ASB_ISOLATION_COREBLK_SYS_PWR_REG	0x1354
+#define EXYNOS3_CAM_SYS_PWR_REG				0x1380
+#define EXYNOS3_MFC_SYS_PWR_REG				0x1388
+#define EXYNOS3_G3D_SYS_PWR_REG				0x138C
+#define EXYNOS3_LCD0_SYS_PWR_REG			0x1390
+#define EXYNOS3_ISP_SYS_PWR_REG				0x1394
+#define EXYNOS3_MAUDIO_SYS_PWR_REG			0x1398
+#define EXYNOS3_DRAM_FREQ_DOWN_SYS_PWR_REG		0x13B0
+#define EXYNOS3_DDRPHY_DLLOFF_SYS_PWR_REG		0x13B4
+#define EXYNOS3_CMU_SYSCLK_ISP_SYS_PWR_REG		0x13B8
+#define EXYNOS3_LPDDR_PHY_DLL_LOCK_SYS_PWR_REG		0x13C0
+#define EXYNOS3_BPLL_SYSCLK_SYS_PWR_REG			0x13C4
+#define EXYNOS3_UPLL_SYSCLK_SYS_PWR_REG			0x13C8
+
+#define EXYNOS3_ARM_CORE0_OPTION			0x2008
+#define EXYNOS3_ARM_CORE_OPTION(_nr)	\
+			(EXYNOS3_ARM_CORE0_OPTION + ((_nr) * 0x80))
+
+#define EXYNOS3_ARM_COMMON_OPTION			0x2408
+#define EXYNOS3_TOP_PWR_OPTION				0x2C48
+#define EXYNOS3_CORE_TOP_PWR_OPTION			0x2CA8
+#define EXYNOS3_XUSBXTI_DURATION			0x341C
+#define EXYNOS3_XXTI_DURATION				0x343C
+#define EXYNOS3_EXT_REGULATOR_DURATION			0x361C
+#define EXYNOS3_EXT_REGULATOR_COREBLK_DURATION		0x363C
+#define XUSBXTI_DURATION				0x00000BB8
+#define XXTI_DURATION					XUSBXTI_DURATION
+#define EXT_REGULATOR_DURATION				0x00001D4C
+#define EXT_REGULATOR_COREBLK_DURATION			EXT_REGULATOR_DURATION
+
+/* for XXX_OPTION */
+#define EXYNOS3_OPTION_USE_SC_COUNTER			(1 << 0)
+#define EXYNOS3_OPTION_USE_SC_FEEDBACK			(1 << 1)
+#define EXYNOS3_OPTION_SKIP_DEACTIVATE_ACEACP_IN_PWDN	(1 << 7)
+
 /* For EXYNOS5 */
 
 #define EXYNOS5_AUTO_WDTRESET_DISABLE				0x0408
 #define EXYNOS5_MASK_WDTRESET_REQUEST				0x040C
 
+#define EXYNOS5_USE_RETENTION			BIT(4)
 #define EXYNOS5_SYS_WDTRESET					(1 << 20)
 
 #define EXYNOS5_ARM_CORE0_SYS_PWR_REG				0x1000
@@ -329,4 +487,204 @@ static inline unsigned int exynos_pmu_cpunr(unsigned int mpidr)
 		 + MPIDR_AFFINITY_LEVEL(mpidr, 0));
 }
 
+/* Only for EXYNOS5420 */
+#define EXYNOS5420_ISP_ARM_OPTION				0x2488
+#define EXYNOS5420_L2RSTDISABLE_VALUE				BIT(3)
+
+#define EXYNOS5420_LPI_MASK					0x0004
+#define EXYNOS5420_LPI_MASK1					0x0008
+#define EXYNOS5420_UFS						BIT(8)
+#define EXYNOS5420_ATB_KFC					BIT(13)
+#define EXYNOS5420_ATB_ISP_ARM					BIT(19)
+#define EXYNOS5420_EMULATION					BIT(31)
+#define ATB_ISP_ARM						BIT(12)
+#define ATB_KFC							BIT(13)
+#define ATB_NOC							BIT(14)
+
+#define EXYNOS5420_ARM_INTR_SPREAD_ENABLE			0x0100
+#define EXYNOS5420_ARM_INTR_SPREAD_USE_STANDBYWFI		0x0104
+#define EXYNOS5420_UP_SCHEDULER					0x0120
+#define SPREAD_ENABLE						0xF
+#define SPREAD_USE_STANDWFI					0xF
+
+#define EXYNOS5420_BB_CON1					0x0784
+#define EXYNOS5420_BB_SEL_EN					BIT(31)
+#define EXYNOS5420_BB_PMOS_EN					BIT(7)
+#define EXYNOS5420_BB_1300X					0XF
+
+#define EXYNOS5420_ARM_CORE2_SYS_PWR_REG			0x1020
+#define EXYNOS5420_DIS_IRQ_ARM_CORE2_LOCAL_SYS_PWR_REG		0x1024
+#define EXYNOS5420_DIS_IRQ_ARM_CORE2_CENTRAL_SYS_PWR_REG	0x1028
+#define EXYNOS5420_ARM_CORE3_SYS_PWR_REG			0x1030
+#define EXYNOS5420_DIS_IRQ_ARM_CORE3_LOCAL_SYS_PWR_REG		0x1034
+#define EXYNOS5420_DIS_IRQ_ARM_CORE3_CENTRAL_SYS_PWR_REG	0x1038
+#define EXYNOS5420_KFC_CORE0_SYS_PWR_REG			0x1040
+#define EXYNOS5420_DIS_IRQ_KFC_CORE0_LOCAL_SYS_PWR_REG		0x1044
+#define EXYNOS5420_DIS_IRQ_KFC_CORE0_CENTRAL_SYS_PWR_REG	0x1048
+#define EXYNOS5420_KFC_CORE1_SYS_PWR_REG			0x1050
+#define EXYNOS5420_DIS_IRQ_KFC_CORE1_LOCAL_SYS_PWR_REG		0x1054
+#define EXYNOS5420_DIS_IRQ_KFC_CORE1_CENTRAL_SYS_PWR_REG	0x1058
+#define EXYNOS5420_KFC_CORE2_SYS_PWR_REG			0x1060
+#define EXYNOS5420_DIS_IRQ_KFC_CORE2_LOCAL_SYS_PWR_REG		0x1064
+#define EXYNOS5420_DIS_IRQ_KFC_CORE2_CENTRAL_SYS_PWR_REG	0x1068
+#define EXYNOS5420_KFC_CORE3_SYS_PWR_REG			0x1070
+#define EXYNOS5420_DIS_IRQ_KFC_CORE3_LOCAL_SYS_PWR_REG		0x1074
+#define EXYNOS5420_DIS_IRQ_KFC_CORE3_CENTRAL_SYS_PWR_REG	0x1078
+#define EXYNOS5420_ISP_ARM_SYS_PWR_REG				0x1090
+#define EXYNOS5420_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG		0x1094
+#define EXYNOS5420_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG		0x1098
+#define EXYNOS5420_ARM_COMMON_SYS_PWR_REG			0x10A0
+#define EXYNOS5420_KFC_COMMON_SYS_PWR_REG			0x10B0
+#define EXYNOS5420_KFC_L2_SYS_PWR_REG				0x10D0
+#define EXYNOS5420_DPLL_SYSCLK_SYS_PWR_REG			0x1158
+#define EXYNOS5420_IPLL_SYSCLK_SYS_PWR_REG			0x115C
+#define EXYNOS5420_KPLL_SYSCLK_SYS_PWR_REG			0x1160
+#define EXYNOS5420_RPLL_SYSCLK_SYS_PWR_REG                      0x1174
+#define EXYNOS5420_SPLL_SYSCLK_SYS_PWR_REG                      0x1178
+#define EXYNOS5420_INTRAM_MEM_SYS_PWR_REG                       0x11B8
+#define EXYNOS5420_INTROM_MEM_SYS_PWR_REG                       0x11BC
+#define EXYNOS5420_ONENANDXL_MEM_SYS_PWR			0x11C0
+#define EXYNOS5420_USBDEV_MEM_SYS_PWR				0x11CC
+#define EXYNOS5420_USBDEV1_MEM_SYS_PWR				0x11D0
+#define EXYNOS5420_SDMMC_MEM_SYS_PWR				0x11D4
+#define EXYNOS5420_CSSYS_MEM_SYS_PWR				0x11D8
+#define EXYNOS5420_SECSS_MEM_SYS_PWR				0x11DC
+#define EXYNOS5420_ROTATOR_MEM_SYS_PWR				0x11E0
+#define EXYNOS5420_INTRAM_MEM_SYS_PWR				0x11E4
+#define EXYNOS5420_INTROM_MEM_SYS_PWR				0x11E8
+#define EXYNOS5420_PAD_RETENTION_JTAG_SYS_PWR_REG		0x1208
+#define EXYNOS5420_PAD_RETENTION_DRAM_SYS_PWR_REG		0x1210
+#define EXYNOS5420_PAD_RETENTION_UART_SYS_PWR_REG		0x1214
+#define EXYNOS5420_PAD_RETENTION_MMC0_SYS_PWR_REG		0x1218
+#define EXYNOS5420_PAD_RETENTION_MMC1_SYS_PWR_REG		0x121C
+#define EXYNOS5420_PAD_RETENTION_MMC2_SYS_PWR_REG		0x1220
+#define EXYNOS5420_PAD_RETENTION_HSI_SYS_PWR_REG		0x1224
+#define EXYNOS5420_PAD_RETENTION_EBIA_SYS_PWR_REG		0x1228
+#define EXYNOS5420_PAD_RETENTION_EBIB_SYS_PWR_REG		0x122C
+#define EXYNOS5420_PAD_RETENTION_SPI_SYS_PWR_REG		0x1230
+#define EXYNOS5420_PAD_RETENTION_DRAM_COREBLK_SYS_PWR_REG	0x1234
+#define EXYNOS5420_DISP1_SYS_PWR_REG				0x1410
+#define EXYNOS5420_MAU_SYS_PWR_REG				0x1414
+#define EXYNOS5420_G2D_SYS_PWR_REG				0x1418
+#define EXYNOS5420_MSC_SYS_PWR_REG				0x141C
+#define EXYNOS5420_FSYS_SYS_PWR_REG				0x1420
+#define EXYNOS5420_FSYS2_SYS_PWR_REG				0x1424
+#define EXYNOS5420_PSGEN_SYS_PWR_REG				0x1428
+#define EXYNOS5420_PERIC_SYS_PWR_REG				0x142C
+#define EXYNOS5420_WCORE_SYS_PWR_REG				0x1430
+#define EXYNOS5420_CMU_CLKSTOP_DISP1_SYS_PWR_REG		0x1490
+#define EXYNOS5420_CMU_CLKSTOP_MAU_SYS_PWR_REG			0x1494
+#define EXYNOS5420_CMU_CLKSTOP_G2D_SYS_PWR_REG			0x1498
+#define EXYNOS5420_CMU_CLKSTOP_MSC_SYS_PWR_REG			0x149C
+#define EXYNOS5420_CMU_CLKSTOP_FSYS_SYS_PWR_REG			0x14A0
+#define EXYNOS5420_CMU_CLKSTOP_FSYS2_SYS_PWR_REG		0x14A4
+#define EXYNOS5420_CMU_CLKSTOP_PSGEN_SYS_PWR_REG		0x14A8
+#define EXYNOS5420_CMU_CLKSTOP_PERIC_SYS_PWR_REG		0x14AC
+#define EXYNOS5420_CMU_CLKSTOP_WCORE_SYS_PWR_REG		0x14B0
+#define EXYNOS5420_CMU_SYSCLK_TOPPWR_SYS_PWR_REG		0x14BC
+#define EXYNOS5420_CMU_SYSCLK_DISP1_SYS_PWR_REG			0x14D0
+#define EXYNOS5420_CMU_SYSCLK_MAU_SYS_PWR_REG			0x14D4
+#define EXYNOS5420_CMU_SYSCLK_G2D_SYS_PWR_REG			0x14D8
+#define EXYNOS5420_CMU_SYSCLK_MSC_SYS_PWR_REG			0x14DC
+#define EXYNOS5420_CMU_SYSCLK_FSYS_SYS_PWR_REG			0x14E0
+#define EXYNOS5420_CMU_SYSCLK_FSYS2_SYS_PWR_REG			0x14E4
+#define EXYNOS5420_CMU_SYSCLK_PSGEN_SYS_PWR_REG			0x14E8
+#define EXYNOS5420_CMU_SYSCLK_PERIC_SYS_PWR_REG			0x14EC
+#define EXYNOS5420_CMU_SYSCLK_WCORE_SYS_PWR_REG			0x14F0
+#define EXYNOS5420_CMU_SYSCLK_SYSMEM_TOPPWR_SYS_PWR_REG		0x14F4
+#define EXYNOS5420_CMU_RESET_FSYS2_SYS_PWR_REG			0x1570
+#define EXYNOS5420_CMU_RESET_PSGEN_SYS_PWR_REG			0x1574
+#define EXYNOS5420_CMU_RESET_PERIC_SYS_PWR_REG			0x1578
+#define EXYNOS5420_CMU_RESET_WCORE_SYS_PWR_REG			0x157C
+#define EXYNOS5420_CMU_RESET_DISP1_SYS_PWR_REG			0x1590
+#define EXYNOS5420_CMU_RESET_MAU_SYS_PWR_REG			0x1594
+#define EXYNOS5420_CMU_RESET_G2D_SYS_PWR_REG			0x1598
+#define EXYNOS5420_CMU_RESET_MSC_SYS_PWR_REG			0x159C
+#define EXYNOS5420_CMU_RESET_FSYS_SYS_PWR_REG			0x15A0
+#define EXYNOS5420_SFR_AXI_CGDIS1				0x15E4
+#define EXYNOS_ARM_CORE2_CONFIGURATION				0x2100
+#define EXYNOS5420_ARM_CORE2_OPTION				0x2108
+#define EXYNOS_ARM_CORE3_CONFIGURATION				0x2180
+#define EXYNOS5420_ARM_CORE3_OPTION				0x2188
+#define EXYNOS5420_ARM_COMMON_STATUS				0x2504
+#define EXYNOS5420_ARM_COMMON_OPTION				0x2508
+#define EXYNOS5420_KFC_COMMON_STATUS				0x2584
+#define EXYNOS5420_KFC_COMMON_OPTION				0x2588
+#define EXYNOS5420_LOGIC_RESET_DURATION3			0x2D1C
+
+#define EXYNOS5420_PAD_RET_GPIO_OPTION				0x30C8
+#define EXYNOS5420_PAD_RET_UART_OPTION				0x30E8
+#define EXYNOS5420_PAD_RET_MMCA_OPTION				0x3108
+#define EXYNOS5420_PAD_RET_MMCB_OPTION				0x3128
+#define EXYNOS5420_PAD_RET_MMCC_OPTION				0x3148
+#define EXYNOS5420_PAD_RET_HSI_OPTION				0x3168
+#define EXYNOS5420_PAD_RET_SPI_OPTION				0x31C8
+#define EXYNOS5420_PAD_RET_DRAM_COREBLK_OPTION			0x31E8
+#define EXYNOS_PAD_RET_DRAM_OPTION				0x3008
+#define EXYNOS_PAD_RET_MAUDIO_OPTION				0x3028
+#define EXYNOS_PAD_RET_JTAG_OPTION				0x3048
+#define EXYNOS_PAD_RET_GPIO_OPTION				0x3108
+#define EXYNOS_PAD_RET_UART_OPTION				0x3128
+#define EXYNOS_PAD_RET_MMCA_OPTION				0x3148
+#define EXYNOS_PAD_RET_MMCB_OPTION				0x3168
+#define EXYNOS_PAD_RET_EBIA_OPTION				0x3188
+#define EXYNOS_PAD_RET_EBIB_OPTION				0x31A8
+
+#define EXYNOS_PS_HOLD_CONTROL					0x330C
+
+/* For SYS_PWR_REG */
+#define EXYNOS_SYS_PWR_CFG					BIT(0)
+
+#define EXYNOS5420_MFC_CONFIGURATION				0x4060
+#define EXYNOS5420_MFC_STATUS					0x4064
+#define EXYNOS5420_MFC_OPTION					0x4068
+#define EXYNOS5420_G3D_CONFIGURATION				0x4080
+#define EXYNOS5420_G3D_STATUS					0x4084
+#define EXYNOS5420_G3D_OPTION					0x4088
+#define EXYNOS5420_DISP0_CONFIGURATION				0x40A0
+#define EXYNOS5420_DISP0_STATUS					0x40A4
+#define EXYNOS5420_DISP0_OPTION					0x40A8
+#define EXYNOS5420_DISP1_CONFIGURATION				0x40C0
+#define EXYNOS5420_DISP1_STATUS					0x40C4
+#define EXYNOS5420_DISP1_OPTION					0x40C8
+#define EXYNOS5420_MAU_CONFIGURATION				0x40E0
+#define EXYNOS5420_MAU_STATUS					0x40E4
+#define EXYNOS5420_MAU_OPTION					0x40E8
+#define EXYNOS5420_FSYS2_OPTION					0x4168
+#define EXYNOS5420_PSGEN_OPTION					0x4188
+
+/* For EXYNOS_CENTRAL_SEQ_OPTION */
+#define EXYNOS5_USE_STANDBYWFI_ARM_CORE0			BIT(16)
+#define EXYNOS5_USE_STANDBYWFI_ARM_CORE1			BUT(17)
+#define EXYNOS5_USE_STANDBYWFE_ARM_CORE0			BIT(24)
+#define EXYNOS5_USE_STANDBYWFE_ARM_CORE1			BIT(25)
+
+#define EXYNOS5420_ARM_USE_STANDBY_WFI0				BIT(4)
+#define EXYNOS5420_ARM_USE_STANDBY_WFI1				BIT(5)
+#define EXYNOS5420_ARM_USE_STANDBY_WFI2				BIT(6)
+#define EXYNOS5420_ARM_USE_STANDBY_WFI3				BIT(7)
+#define EXYNOS5420_KFC_USE_STANDBY_WFI0				BIT(8)
+#define EXYNOS5420_KFC_USE_STANDBY_WFI1				BIT(9)
+#define EXYNOS5420_KFC_USE_STANDBY_WFI2				BIT(10)
+#define EXYNOS5420_KFC_USE_STANDBY_WFI3				BIT(11)
+#define EXYNOS5420_ARM_USE_STANDBY_WFE0				BIT(16)
+#define EXYNOS5420_ARM_USE_STANDBY_WFE1				BIT(17)
+#define EXYNOS5420_ARM_USE_STANDBY_WFE2				BIT(18)
+#define EXYNOS5420_ARM_USE_STANDBY_WFE3				BIT(19)
+#define EXYNOS5420_KFC_USE_STANDBY_WFE0				BIT(20)
+#define EXYNOS5420_KFC_USE_STANDBY_WFE1				BIT(21)
+#define EXYNOS5420_KFC_USE_STANDBY_WFE2				BIT(22)
+#define EXYNOS5420_KFC_USE_STANDBY_WFE3				BIT(23)
+
+#define DUR_WAIT_RESET				0xF
+
+#define EXYNOS5420_USE_STANDBY_WFI_ALL	(EXYNOS5420_ARM_USE_STANDBY_WFI0    \
+					 | EXYNOS5420_ARM_USE_STANDBY_WFI1  \
+					 | EXYNOS5420_ARM_USE_STANDBY_WFI2  \
+					 | EXYNOS5420_ARM_USE_STANDBY_WFI3  \
+					 | EXYNOS5420_KFC_USE_STANDBY_WFI0  \
+					 | EXYNOS5420_KFC_USE_STANDBY_WFI1  \
+					 | EXYNOS5420_KFC_USE_STANDBY_WFI2  \
+					 | EXYNOS5420_KFC_USE_STANDBY_WFI3)
+
 #endif /* __ASM_ARCH_REGS_PMU_H */
diff --git a/arch/arm/mach-exynos/sleep.S b/arch/arm/mach-exynos/sleep.S
index 108a45f..e3c3730 100644
--- a/arch/arm/mach-exynos/sleep.S
+++ b/arch/arm/mach-exynos/sleep.S
@@ -16,6 +16,7 @@
  */
 
 #include <linux/linkage.h>
+#include "smc.h"
 
 #define CPU_MASK	0xff0ffff0
 #define CPU_CORTEX_A9	0x410fc090
@@ -55,3 +56,30 @@ ENTRY(exynos_cpu_resume)
 #endif
 	b	cpu_resume
 ENDPROC(exynos_cpu_resume)
+
+	.align
+
+ENTRY(exynos_cpu_resume_ns)
+	mrc	p15, 0, r0, c0, c0, 0
+	ldr	r1, =CPU_MASK
+	and	r0, r0, r1
+	ldr	r1, =CPU_CORTEX_A9
+	cmp	r0, r1
+	bne	skip_cp15
+
+	adr	r0, cp15_save_power
+	ldr	r1, [r0]
+	adr	r0, cp15_save_diag
+	ldr	r2, [r0]
+	mov	r0, #SMC_CMD_C15RESUME
+	dsb
+	smc	#0
+skip_cp15:
+	b	cpu_resume
+ENDPROC(exynos_cpu_resume_ns)
+	.globl cp15_save_diag
+cp15_save_diag:
+	.long	0	@ cp15 diagnostic
+	.globl cp15_save_power
+cp15_save_power:
+	.long	0	@ cp15 power control
diff --git a/arch/arm/mach-exynos/smc.h b/arch/arm/mach-exynos/smc.h
index 13a1dc8..f7b82f9 100644
--- a/arch/arm/mach-exynos/smc.h
+++ b/arch/arm/mach-exynos/smc.h
@@ -26,6 +26,10 @@
 #define SMC_CMD_L2X0INVALL	(-24)
 #define SMC_CMD_L2X0DEBUG	(-25)
 
+#ifndef __ASSEMBLY__
+
 extern void exynos_smc(u32 cmd, u32 arg1, u32 arg2, u32 arg3);
 
+#endif /* __ASSEMBLY__ */
+
 #endif
diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c
new file mode 100644
index 0000000..f8e7dcd
--- /dev/null
+++ b/arch/arm/mach-exynos/suspend.c
@@ -0,0 +1,566 @@
+/*
+ * Copyright (c) 2011-2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * EXYNOS - Suspend support
+ *
+ * Based on arch/arm/mach-s3c2410/pm.c
+ * Copyright (c) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <linux/syscore_ops.h>
+#include <linux/cpu_pm.h>
+#include <linux/io.h>
+#include <linux/irqchip/arm-gic.h>
+#include <linux/err.h>
+#include <linux/regulator/machine.h>
+
+#include <asm/cacheflush.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/firmware.h>
+#include <asm/mcpm.h>
+#include <asm/smp_scu.h>
+#include <asm/suspend.h>
+
+#include <plat/pm-common.h>
+#include <plat/regs-srom.h>
+
+#include "common.h"
+#include "regs-pmu.h"
+#include "regs-sys.h"
+#include "exynos-pmu.h"
+
+#define S5P_CHECK_SLEEP 0x00000BAD
+
+#define REG_TABLE_END (-1U)
+
+#define EXYNOS5420_CPU_STATE	0x28
+
+/**
+ * struct exynos_wkup_irq - Exynos GIC to PMU IRQ mapping
+ * @hwirq: Hardware IRQ signal of the GIC
+ * @mask: Mask in PMU wake-up mask register
+ */
+struct exynos_wkup_irq {
+	unsigned int hwirq;
+	u32 mask;
+};
+
+static struct sleep_save exynos5_sys_save[] = {
+	SAVE_ITEM(EXYNOS5_SYS_I2C_CFG),
+};
+
+static struct sleep_save exynos_core_save[] = {
+	/* SROM side */
+	SAVE_ITEM(S5P_SROM_BW),
+	SAVE_ITEM(S5P_SROM_BC0),
+	SAVE_ITEM(S5P_SROM_BC1),
+	SAVE_ITEM(S5P_SROM_BC2),
+	SAVE_ITEM(S5P_SROM_BC3),
+};
+
+struct exynos_pm_data {
+	const struct exynos_wkup_irq *wkup_irq;
+	struct sleep_save *extra_save;
+	int num_extra_save;
+	unsigned int wake_disable_mask;
+	unsigned int *release_ret_regs;
+
+	void (*pm_prepare)(void);
+	void (*pm_resume_prepare)(void);
+	void (*pm_resume)(void);
+	int (*pm_suspend)(void);
+	int (*cpu_suspend)(unsigned long);
+};
+
+struct exynos_pm_data *pm_data;
+
+static int exynos5420_cpu_state;
+static unsigned int exynos_pmu_spare3;
+
+/*
+ * GIC wake-up support
+ */
+
+static u32 exynos_irqwake_intmask = 0xffffffff;
+
+static const struct exynos_wkup_irq exynos4_wkup_irq[] = {
+	{ 76, BIT(1) }, /* RTC alarm */
+	{ 77, BIT(2) }, /* RTC tick */
+	{ /* sentinel */ },
+};
+
+static const struct exynos_wkup_irq exynos5250_wkup_irq[] = {
+	{ 75, BIT(1) }, /* RTC alarm */
+	{ 76, BIT(2) }, /* RTC tick */
+	{ /* sentinel */ },
+};
+
+unsigned int exynos_release_ret_regs[] = {
+	S5P_PAD_RET_MAUDIO_OPTION,
+	S5P_PAD_RET_GPIO_OPTION,
+	S5P_PAD_RET_UART_OPTION,
+	S5P_PAD_RET_MMCA_OPTION,
+	S5P_PAD_RET_MMCB_OPTION,
+	S5P_PAD_RET_EBIA_OPTION,
+	S5P_PAD_RET_EBIB_OPTION,
+	REG_TABLE_END,
+};
+
+unsigned int exynos5420_release_ret_regs[] = {
+	EXYNOS_PAD_RET_DRAM_OPTION,
+	EXYNOS_PAD_RET_MAUDIO_OPTION,
+	EXYNOS_PAD_RET_JTAG_OPTION,
+	EXYNOS5420_PAD_RET_GPIO_OPTION,
+	EXYNOS5420_PAD_RET_UART_OPTION,
+	EXYNOS5420_PAD_RET_MMCA_OPTION,
+	EXYNOS5420_PAD_RET_MMCB_OPTION,
+	EXYNOS5420_PAD_RET_MMCC_OPTION,
+	EXYNOS5420_PAD_RET_HSI_OPTION,
+	EXYNOS_PAD_RET_EBIA_OPTION,
+	EXYNOS_PAD_RET_EBIB_OPTION,
+	EXYNOS5420_PAD_RET_SPI_OPTION,
+	EXYNOS5420_PAD_RET_DRAM_COREBLK_OPTION,
+	REG_TABLE_END,
+};
+
+static int exynos_irq_set_wake(struct irq_data *data, unsigned int state)
+{
+	const struct exynos_wkup_irq *wkup_irq;
+
+	if (!pm_data->wkup_irq)
+		return -ENOENT;
+	wkup_irq = pm_data->wkup_irq;
+
+	while (wkup_irq->mask) {
+		if (wkup_irq->hwirq == data->hwirq) {
+			if (!state)
+				exynos_irqwake_intmask |= wkup_irq->mask;
+			else
+				exynos_irqwake_intmask &= ~wkup_irq->mask;
+			return 0;
+		}
+		++wkup_irq;
+	}
+
+	return -ENOENT;
+}
+
+static int exynos_cpu_do_idle(void)
+{
+	/* issue the standby signal into the pm unit. */
+	cpu_do_idle();
+
+	pr_info("Failed to suspend the system\n");
+	return 1; /* Aborting suspend */
+}
+static void exynos_flush_cache_all(void)
+{
+	flush_cache_all();
+	outer_flush_all();
+}
+
+static int exynos_cpu_suspend(unsigned long arg)
+{
+	exynos_flush_cache_all();
+	return exynos_cpu_do_idle();
+}
+
+static int exynos5420_cpu_suspend(unsigned long arg)
+{
+	/* MCPM works with HW CPU identifiers */
+	unsigned int mpidr = read_cpuid_mpidr();
+	unsigned int cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+	unsigned int cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+
+	__raw_writel(0x0, sysram_base_addr + EXYNOS5420_CPU_STATE);
+
+	if (IS_ENABLED(CONFIG_EXYNOS5420_MCPM)) {
+		mcpm_set_entry_vector(cpu, cluster, exynos_cpu_resume);
+
+		/*
+		 * Residency value passed to mcpm_cpu_suspend back-end
+		 * has to be given clear semantics. Set to 0 as a
+		 * temporary value.
+		 */
+		mcpm_cpu_suspend(0);
+	}
+
+	pr_info("Failed to suspend the system\n");
+
+	/* return value != 0 means failure */
+	return 1;
+}
+
+static void exynos_pm_set_wakeup_mask(void)
+{
+	/* Set wake-up mask registers */
+	pmu_raw_writel(exynos_get_eint_wake_mask(), S5P_EINT_WAKEUP_MASK);
+	pmu_raw_writel(exynos_irqwake_intmask & ~(1 << 31), S5P_WAKEUP_MASK);
+}
+
+static void exynos_pm_enter_sleep_mode(void)
+{
+	/* Set value of power down register for sleep mode */
+	exynos_sys_powerdown_conf(SYS_SLEEP);
+	pmu_raw_writel(S5P_CHECK_SLEEP, S5P_INFORM1);
+}
+
+static void exynos_pm_prepare(void)
+{
+	/* Set wake-up mask registers */
+	exynos_pm_set_wakeup_mask();
+
+	s3c_pm_do_save(exynos_core_save, ARRAY_SIZE(exynos_core_save));
+
+	 if (pm_data->extra_save)
+		s3c_pm_do_save(pm_data->extra_save,
+				pm_data->num_extra_save);
+
+	exynos_pm_enter_sleep_mode();
+
+	/* ensure at least INFORM0 has the resume address */
+	pmu_raw_writel(virt_to_phys(exynos_cpu_resume), S5P_INFORM0);
+}
+
+static void exynos5420_pm_prepare(void)
+{
+	unsigned int tmp;
+
+	/* Set wake-up mask registers */
+	exynos_pm_set_wakeup_mask();
+
+	s3c_pm_do_save(exynos_core_save, ARRAY_SIZE(exynos_core_save));
+
+	exynos_pmu_spare3 = pmu_raw_readl(S5P_PMU_SPARE3);
+	/*
+	 * The cpu state needs to be saved and restored so that the
+	 * secondary CPUs will enter low power start. Though the U-Boot
+	 * is setting the cpu state with low power flag, the kernel
+	 * needs to restore it back in case, the primary cpu fails to
+	 * suspend for any reason.
+	 */
+	exynos5420_cpu_state = __raw_readl(sysram_base_addr +
+						EXYNOS5420_CPU_STATE);
+
+	exynos_pm_enter_sleep_mode();
+
+	/* ensure at least INFORM0 has the resume address */
+	if (IS_ENABLED(CONFIG_EXYNOS5420_MCPM))
+		pmu_raw_writel(virt_to_phys(mcpm_entry_point), S5P_INFORM0);
+
+	tmp = pmu_raw_readl(EXYNOS5_ARM_L2_OPTION);
+	tmp &= ~EXYNOS5_USE_RETENTION;
+	pmu_raw_writel(tmp, EXYNOS5_ARM_L2_OPTION);
+
+	tmp = pmu_raw_readl(EXYNOS5420_SFR_AXI_CGDIS1);
+	tmp |= EXYNOS5420_UFS;
+	pmu_raw_writel(tmp, EXYNOS5420_SFR_AXI_CGDIS1);
+
+	tmp = pmu_raw_readl(EXYNOS5420_ARM_COMMON_OPTION);
+	tmp &= ~EXYNOS5420_L2RSTDISABLE_VALUE;
+	pmu_raw_writel(tmp, EXYNOS5420_ARM_COMMON_OPTION);
+
+	tmp = pmu_raw_readl(EXYNOS5420_FSYS2_OPTION);
+	tmp |= EXYNOS5420_EMULATION;
+	pmu_raw_writel(tmp, EXYNOS5420_FSYS2_OPTION);
+
+	tmp = pmu_raw_readl(EXYNOS5420_PSGEN_OPTION);
+	tmp |= EXYNOS5420_EMULATION;
+	pmu_raw_writel(tmp, EXYNOS5420_PSGEN_OPTION);
+}
+
+
+static int exynos_pm_suspend(void)
+{
+	exynos_pm_central_suspend();
+
+	if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
+		exynos_cpu_save_register();
+
+	return 0;
+}
+
+static int exynos5420_pm_suspend(void)
+{
+	u32 this_cluster;
+
+	exynos_pm_central_suspend();
+
+	/* Setting SEQ_OPTION register */
+
+	this_cluster = MPIDR_AFFINITY_LEVEL(read_cpuid_mpidr(), 1);
+	if (!this_cluster)
+		pmu_raw_writel(EXYNOS5420_ARM_USE_STANDBY_WFI0,
+				S5P_CENTRAL_SEQ_OPTION);
+	else
+		pmu_raw_writel(EXYNOS5420_KFC_USE_STANDBY_WFI0,
+				S5P_CENTRAL_SEQ_OPTION);
+	return 0;
+}
+
+static void exynos_pm_release_retention(void)
+{
+	unsigned int i;
+
+	for (i = 0; (pm_data->release_ret_regs[i] != REG_TABLE_END); i++)
+		pmu_raw_writel(EXYNOS_WAKEUP_FROM_LOWPWR,
+				pm_data->release_ret_regs[i]);
+}
+
+static void exynos_pm_resume(void)
+{
+	u32 cpuid = read_cpuid_part();
+
+	if (exynos_pm_central_resume())
+		goto early_wakeup;
+
+	/* For release retention */
+	exynos_pm_release_retention();
+
+	if (pm_data->extra_save)
+		s3c_pm_do_restore_core(pm_data->extra_save,
+					pm_data->num_extra_save);
+
+	s3c_pm_do_restore_core(exynos_core_save, ARRAY_SIZE(exynos_core_save));
+
+	if (cpuid == ARM_CPU_PART_CORTEX_A9)
+		scu_enable(S5P_VA_SCU);
+
+	if (call_firmware_op(resume) == -ENOSYS
+	    && cpuid == ARM_CPU_PART_CORTEX_A9)
+		exynos_cpu_restore_register();
+
+early_wakeup:
+
+	/* Clear SLEEP mode set in INFORM1 */
+	pmu_raw_writel(0x0, S5P_INFORM1);
+}
+
+static void exynos5420_prepare_pm_resume(void)
+{
+	if (IS_ENABLED(CONFIG_EXYNOS5420_MCPM))
+		WARN_ON(mcpm_cpu_powered_up());
+}
+
+static void exynos5420_pm_resume(void)
+{
+	unsigned long tmp;
+
+	/* Restore the CPU0 low power state register */
+	tmp = pmu_raw_readl(EXYNOS5_ARM_CORE0_SYS_PWR_REG);
+	pmu_raw_writel(tmp | S5P_CORE_LOCAL_PWR_EN,
+		EXYNOS5_ARM_CORE0_SYS_PWR_REG);
+
+	/* Restore the sysram cpu state register */
+	__raw_writel(exynos5420_cpu_state,
+		sysram_base_addr + EXYNOS5420_CPU_STATE);
+
+	pmu_raw_writel(EXYNOS5420_USE_STANDBY_WFI_ALL,
+			S5P_CENTRAL_SEQ_OPTION);
+
+	if (exynos_pm_central_resume())
+		goto early_wakeup;
+
+	/* For release retention */
+	exynos_pm_release_retention();
+
+	pmu_raw_writel(exynos_pmu_spare3, S5P_PMU_SPARE3);
+
+	s3c_pm_do_restore_core(exynos_core_save, ARRAY_SIZE(exynos_core_save));
+
+early_wakeup:
+
+	tmp = pmu_raw_readl(EXYNOS5420_SFR_AXI_CGDIS1);
+	tmp &= ~EXYNOS5420_UFS;
+	pmu_raw_writel(tmp, EXYNOS5420_SFR_AXI_CGDIS1);
+
+	tmp = pmu_raw_readl(EXYNOS5420_FSYS2_OPTION);
+	tmp &= ~EXYNOS5420_EMULATION;
+	pmu_raw_writel(tmp, EXYNOS5420_FSYS2_OPTION);
+
+	tmp = pmu_raw_readl(EXYNOS5420_PSGEN_OPTION);
+	tmp &= ~EXYNOS5420_EMULATION;
+	pmu_raw_writel(tmp, EXYNOS5420_PSGEN_OPTION);
+
+	/* Clear SLEEP mode set in INFORM1 */
+	pmu_raw_writel(0x0, S5P_INFORM1);
+}
+
+/*
+ * Suspend Ops
+ */
+
+static int exynos_suspend_enter(suspend_state_t state)
+{
+	int ret;
+
+	s3c_pm_debug_init();
+
+	S3C_PMDBG("%s: suspending the system...\n", __func__);
+
+	S3C_PMDBG("%s: wakeup masks: %08x,%08x\n", __func__,
+			exynos_irqwake_intmask, exynos_get_eint_wake_mask());
+
+	if (exynos_irqwake_intmask == -1U
+	    && exynos_get_eint_wake_mask() == -1U) {
+		pr_err("%s: No wake-up sources!\n", __func__);
+		pr_err("%s: Aborting sleep\n", __func__);
+		return -EINVAL;
+	}
+
+	s3c_pm_save_uarts();
+	if (pm_data->pm_prepare)
+		pm_data->pm_prepare();
+	flush_cache_all();
+	s3c_pm_check_store();
+
+	ret = call_firmware_op(suspend);
+	if (ret == -ENOSYS)
+		ret = cpu_suspend(0, pm_data->cpu_suspend);
+	if (ret)
+		return ret;
+
+	if (pm_data->pm_resume_prepare)
+		pm_data->pm_resume_prepare();
+	s3c_pm_restore_uarts();
+
+	S3C_PMDBG("%s: wakeup stat: %08x\n", __func__,
+			pmu_raw_readl(S5P_WAKEUP_STAT));
+
+	s3c_pm_check_restore();
+
+	S3C_PMDBG("%s: resuming the system...\n", __func__);
+
+	return 0;
+}
+
+static int exynos_suspend_prepare(void)
+{
+	int ret;
+
+	/*
+	 * REVISIT: It would be better if struct platform_suspend_ops
+	 * .prepare handler get the suspend_state_t as a parameter to
+	 * avoid hard-coding the suspend to mem state. It's safe to do
+	 * it now only because the suspend_valid_only_mem function is
+	 * used as the .valid callback used to check if a given state
+	 * is supported by the platform anyways.
+	 */
+	ret = regulator_suspend_prepare(PM_SUSPEND_MEM);
+	if (ret) {
+		pr_err("Failed to prepare regulators for suspend (%d)\n", ret);
+		return ret;
+	}
+
+	s3c_pm_check_prepare();
+
+	return 0;
+}
+
+static void exynos_suspend_finish(void)
+{
+	int ret;
+
+	s3c_pm_check_cleanup();
+
+	ret = regulator_suspend_finish();
+	if (ret)
+		pr_warn("Failed to resume regulators from suspend (%d)\n", ret);
+}
+
+static const struct platform_suspend_ops exynos_suspend_ops = {
+	.enter		= exynos_suspend_enter,
+	.prepare	= exynos_suspend_prepare,
+	.finish		= exynos_suspend_finish,
+	.valid		= suspend_valid_only_mem,
+};
+
+static const struct exynos_pm_data exynos4_pm_data = {
+	.wkup_irq	= exynos4_wkup_irq,
+	.wake_disable_mask = ((0xFF << 8) | (0x1F << 1)),
+	.release_ret_regs = exynos_release_ret_regs,
+	.pm_suspend	= exynos_pm_suspend,
+	.pm_resume	= exynos_pm_resume,
+	.pm_prepare	= exynos_pm_prepare,
+	.cpu_suspend	= exynos_cpu_suspend,
+};
+
+static const struct exynos_pm_data exynos5250_pm_data = {
+	.wkup_irq	= exynos5250_wkup_irq,
+	.wake_disable_mask = ((0xFF << 8) | (0x1F << 1)),
+	.release_ret_regs = exynos_release_ret_regs,
+	.extra_save	= exynos5_sys_save,
+	.num_extra_save	= ARRAY_SIZE(exynos5_sys_save),
+	.pm_suspend	= exynos_pm_suspend,
+	.pm_resume	= exynos_pm_resume,
+	.pm_prepare	= exynos_pm_prepare,
+	.cpu_suspend	= exynos_cpu_suspend,
+};
+
+static struct exynos_pm_data exynos5420_pm_data = {
+	.wkup_irq	= exynos5250_wkup_irq,
+	.wake_disable_mask = (0x7F << 7) | (0x1F << 1),
+	.release_ret_regs = exynos5420_release_ret_regs,
+	.pm_resume_prepare = exynos5420_prepare_pm_resume,
+	.pm_resume	= exynos5420_pm_resume,
+	.pm_suspend	= exynos5420_pm_suspend,
+	.pm_prepare	= exynos5420_pm_prepare,
+	.cpu_suspend	= exynos5420_cpu_suspend,
+};
+
+static struct of_device_id exynos_pmu_of_device_ids[] = {
+	{
+		.compatible = "samsung,exynos4210-pmu",
+		.data = &exynos4_pm_data,
+	}, {
+		.compatible = "samsung,exynos4212-pmu",
+		.data = &exynos4_pm_data,
+	}, {
+		.compatible = "samsung,exynos4412-pmu",
+		.data = &exynos4_pm_data,
+	}, {
+		.compatible = "samsung,exynos5250-pmu",
+		.data = &exynos5250_pm_data,
+	}, {
+		.compatible = "samsung,exynos5420-pmu",
+		.data = &exynos5420_pm_data,
+	},
+	{ /*sentinel*/ },
+};
+
+static struct syscore_ops exynos_pm_syscore_ops;
+
+void __init exynos_pm_init(void)
+{
+	const struct of_device_id *match;
+	u32 tmp;
+
+	of_find_matching_node_and_match(NULL, exynos_pmu_of_device_ids, &match);
+	if (!match) {
+		pr_err("Failed to find PMU node\n");
+		return;
+	}
+	pm_data = (struct exynos_pm_data *) match->data;
+
+	/* Platform-specific GIC callback */
+	gic_arch_extn.irq_set_wake = exynos_irq_set_wake;
+
+	/* All wakeup disable */
+	tmp = pmu_raw_readl(S5P_WAKEUP_MASK);
+	tmp |= pm_data->wake_disable_mask;
+	pmu_raw_writel(tmp, S5P_WAKEUP_MASK);
+
+	exynos_pm_syscore_ops.suspend	= pm_data->pm_suspend;
+	exynos_pm_syscore_ops.resume	= pm_data->pm_resume;
+
+	register_syscore_ops(&exynos_pm_syscore_ops);
+	suspend_set_ops(&exynos_suspend_ops);
+}
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 11b2957..e8627e0 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -633,12 +633,41 @@ config SOC_VF610
 	bool "Vybrid Family VF610 support"
 	select ARM_GIC
 	select PINCTRL_VF610
-	select VF_PIT_TIMER
 	select PL310_ERRATA_769419 if CACHE_L2X0
 
 	help
 	  This enable support for Freescale Vybrid VF610 processor.
 
+choice
+	prompt "Clocksource for scheduler clock"
+	depends on SOC_VF610
+	default VF_USE_ARM_GLOBAL_TIMER
+
+	config VF_USE_ARM_GLOBAL_TIMER
+		bool "Use ARM Global Timer"
+		select ARM_GLOBAL_TIMER
+		select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
+		help
+		  Use the ARM Global Timer as clocksource
+
+	config VF_USE_PIT_TIMER
+		bool "Use PIT timer"
+		select VF_PIT_TIMER
+		help
+		  Use SoC Periodic Interrupt Timer (PIT) as clocksource
+
+endchoice
+
+config SOC_LS1021A
+	bool "Freescale LS1021A support"
+	select ARM_GIC
+	select HAVE_ARM_ARCH_TIMER
+	select PCI_DOMAINS if PCI
+	select ZONE_DMA if ARM_LPAE
+
+	help
+	  This enable support for Freescale LS1021A processor.
+
 endif
 
 source "arch/arm/mach-imx/devices/Kconfig"
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 6e4fcd8..f5ac685 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -12,7 +12,7 @@ obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clk-imx31.o iomux-imx31.o ehci-
 obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clk-imx35.o ehci-imx35.o pm-imx3.o
 
 imx5-pm-$(CONFIG_PM) += pm-imx5.o
-obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o clk-imx51-imx53.o $(imx5-pm-y)
+obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o clk-imx51-imx53.o clk-cpu.o $(imx5-pm-y)
 
 obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \
 			    clk-pfd.o clk-busy.o clk.o \
@@ -89,7 +89,7 @@ obj-$(CONFIG_HAVE_IMX_ANATOP) += anatop.o
 obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
 obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o
 obj-$(CONFIG_HAVE_IMX_SRC) += src.o
-ifdef CONFIG_SOC_IMX6
+ifneq ($(CONFIG_SOC_IMX6)$(CONFIG_SOC_LS1021A),)
 AFLAGS_headsmp.o :=-Wa,-march=armv7-a
 obj-$(CONFIG_SMP) += headsmp.o platsmp.o
 obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
@@ -110,4 +110,6 @@ obj-$(CONFIG_SOC_IMX53) += mach-imx53.o
 
 obj-$(CONFIG_SOC_VF610) += clk-vf610.o mach-vf610.o
 
+obj-$(CONFIG_SOC_LS1021A) += mach-ls1021a.o
+
 obj-y += devices/
diff --git a/arch/arm/mach-imx/anatop.c b/arch/arm/mach-imx/anatop.c
index 8259a62..7f262fe 100644
--- a/arch/arm/mach-imx/anatop.c
+++ b/arch/arm/mach-imx/anatop.c
@@ -30,8 +30,11 @@
 #define ANADIG_DIGPROG_IMX6SL	0x280
 
 #define BM_ANADIG_REG_2P5_ENABLE_WEAK_LINREG	0x40000
+#define BM_ANADIG_REG_2P5_ENABLE_PULLDOWN	0x8
 #define BM_ANADIG_REG_CORE_FET_ODRIVE		0x20000000
 #define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG	0x1000
+/* Below MISC0_DISCON_HIGH_SNVS is only for i.MX6SL */
+#define BM_ANADIG_ANA_MISC0_DISCON_HIGH_SNVS	0x2000
 #define BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B	0x80000
 #define BM_ANADIG_USB_CHRG_DETECT_EN_B		0x100000
 
@@ -56,16 +59,43 @@ static void imx_anatop_enable_fet_odrive(bool enable)
 		BM_ANADIG_REG_CORE_FET_ODRIVE);
 }
 
+static inline void imx_anatop_enable_2p5_pulldown(bool enable)
+{
+	regmap_write(anatop, ANADIG_REG_2P5 + (enable ? REG_SET : REG_CLR),
+		BM_ANADIG_REG_2P5_ENABLE_PULLDOWN);
+}
+
+static inline void imx_anatop_disconnect_high_snvs(bool enable)
+{
+	regmap_write(anatop, ANADIG_ANA_MISC0 + (enable ? REG_SET : REG_CLR),
+		BM_ANADIG_ANA_MISC0_DISCON_HIGH_SNVS);
+}
+
 void imx_anatop_pre_suspend(void)
 {
-	imx_anatop_enable_weak2p5(true);
+	if (imx_mmdc_get_ddr_type() == IMX_DDR_TYPE_LPDDR2)
+		imx_anatop_enable_2p5_pulldown(true);
+	else
+		imx_anatop_enable_weak2p5(true);
+
 	imx_anatop_enable_fet_odrive(true);
+
+	if (cpu_is_imx6sl())
+		imx_anatop_disconnect_high_snvs(true);
 }
 
 void imx_anatop_post_resume(void)
 {
+	if (imx_mmdc_get_ddr_type() == IMX_DDR_TYPE_LPDDR2)
+		imx_anatop_enable_2p5_pulldown(false);
+	else
+		imx_anatop_enable_weak2p5(false);
+
 	imx_anatop_enable_fet_odrive(false);
-	imx_anatop_enable_weak2p5(false);
+
+	if (cpu_is_imx6sl())
+		imx_anatop_disconnect_high_snvs(false);
+
 }
 
 static void imx_anatop_usb_chrg_detect_disable(void)
diff --git a/arch/arm/mach-imx/clk-cpu.c b/arch/arm/mach-imx/clk-cpu.c
new file mode 100644
index 0000000..aa1c345
--- /dev/null
+++ b/arch/arm/mach-imx/clk-cpu.c
@@ -0,0 +1,107 @@
+/*
+ * Copyright (c) 2014 Lucas Stach <l.stach@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+
+struct clk_cpu {
+	struct clk_hw	hw;
+	struct clk	*div;
+	struct clk	*mux;
+	struct clk	*pll;
+	struct clk	*step;
+};
+
+static inline struct clk_cpu *to_clk_cpu(struct clk_hw *hw)
+{
+	return container_of(hw, struct clk_cpu, hw);
+}
+
+static unsigned long clk_cpu_recalc_rate(struct clk_hw *hw,
+					 unsigned long parent_rate)
+{
+	struct clk_cpu *cpu = to_clk_cpu(hw);
+
+	return clk_get_rate(cpu->div);
+}
+
+static long clk_cpu_round_rate(struct clk_hw *hw, unsigned long rate,
+			       unsigned long *prate)
+{
+	struct clk_cpu *cpu = to_clk_cpu(hw);
+
+	return clk_round_rate(cpu->pll, rate);
+}
+
+static int clk_cpu_set_rate(struct clk_hw *hw, unsigned long rate,
+			    unsigned long parent_rate)
+{
+	struct clk_cpu *cpu = to_clk_cpu(hw);
+	int ret;
+
+	/* switch to PLL bypass clock */
+	ret = clk_set_parent(cpu->mux, cpu->step);
+	if (ret)
+		return ret;
+
+	/* reprogram PLL */
+	ret = clk_set_rate(cpu->pll, rate);
+	if (ret) {
+		clk_set_parent(cpu->mux, cpu->pll);
+		return ret;
+	}
+	/* switch back to PLL clock */
+	clk_set_parent(cpu->mux, cpu->pll);
+
+	/* Ensure the divider is what we expect */
+	clk_set_rate(cpu->div, rate);
+
+	return 0;
+}
+
+static const struct clk_ops clk_cpu_ops = {
+	.recalc_rate	= clk_cpu_recalc_rate,
+	.round_rate	= clk_cpu_round_rate,
+	.set_rate	= clk_cpu_set_rate,
+};
+
+struct clk *imx_clk_cpu(const char *name, const char *parent_name,
+		struct clk *div, struct clk *mux, struct clk *pll,
+		struct clk *step)
+{
+	struct clk_cpu *cpu;
+	struct clk *clk;
+	struct clk_init_data init;
+
+	cpu = kzalloc(sizeof(*cpu), GFP_KERNEL);
+	if (!cpu)
+		return ERR_PTR(-ENOMEM);
+
+	cpu->div = div;
+	cpu->mux = mux;
+	cpu->pll = pll;
+	cpu->step = step;
+
+	init.name = name;
+	init.ops = &clk_cpu_ops;
+	init.flags = 0;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	cpu->hw.init = &init;
+
+	clk = clk_register(NULL, &cpu->hw);
+	if (IS_ERR(clk))
+		kfree(cpu);
+
+	return clk;
+}
diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c
index 72d6521..0f7e536 100644
--- a/arch/arm/mach-imx/clk-imx51-imx53.c
+++ b/arch/arm/mach-imx/clk-imx51-imx53.c
@@ -125,6 +125,8 @@ static const char *mx53_spdif_xtal_sel[] = { "osc", "ckih", "ckih2", "pll4_sw",
 static const char *spdif_sel[] = { "pll1_sw", "pll2_sw", "pll3_sw", "spdif_xtal_sel", };
 static const char *spdif0_com_sel[] = { "spdif0_podf", "ssi1_root_gate", };
 static const char *mx51_spdif1_com_sel[] = { "spdif1_podf", "ssi2_root_gate", };
+static const char *step_sels[] = { "lp_apm", };
+static const char *cpu_podf_sels[] = { "pll1_sw", "step_sel" };
 
 static struct clk *clk[IMX5_CLK_END];
 static struct clk_onecell_data clk_data;
@@ -193,7 +195,9 @@ static void __init mx5_clocks_common_init(void __iomem *ccm_base)
 	clk[IMX5_CLK_USB_PHY_PODF]	= imx_clk_divider("usb_phy_podf", "usb_phy_pred", MXC_CCM_CDCDR, 0, 3);
 	clk[IMX5_CLK_USB_PHY_SEL]	= imx_clk_mux("usb_phy_sel", MXC_CCM_CSCMR1, 26, 1,
 						usb_phy_sel_str, ARRAY_SIZE(usb_phy_sel_str));
-	clk[IMX5_CLK_CPU_PODF]		= imx_clk_divider("cpu_podf", "pll1_sw", MXC_CCM_CACRR, 0, 3);
+	clk[IMX5_CLK_STEP_SEL]		= imx_clk_mux("step_sel", MXC_CCM_CCSR, 7, 2, step_sels, ARRAY_SIZE(step_sels));
+	clk[IMX5_CLK_CPU_PODF_SEL]	= imx_clk_mux("cpu_podf_sel", MXC_CCM_CCSR, 2, 1, cpu_podf_sels, ARRAY_SIZE(cpu_podf_sels));
+	clk[IMX5_CLK_CPU_PODF]		= imx_clk_divider("cpu_podf", "cpu_podf_sel", MXC_CCM_CACRR, 0, 3);
 	clk[IMX5_CLK_DI_PRED]		= imx_clk_divider("di_pred", "pll3_sw", MXC_CCM_CDCDR, 6, 3);
 	clk[IMX5_CLK_IIM_GATE]		= imx_clk_gate2("iim_gate", "ipg", MXC_CCM_CCGR0, 30);
 	clk[IMX5_CLK_UART1_IPG_GATE]	= imx_clk_gate2("uart1_ipg_gate", "ipg", MXC_CCM_CCGR1, 6);
@@ -537,6 +541,11 @@ static void __init mx53_clocks_init(struct device_node *np)
 	clk[IMX5_CLK_CKO2]		= imx_clk_gate2("cko2", "cko2_podf", MXC_CCM_CCOSR, 24);
 	clk[IMX5_CLK_SPDIF_XTAL_SEL]	= imx_clk_mux("spdif_xtal_sel", MXC_CCM_CSCMR1, 2, 2,
 						mx53_spdif_xtal_sel, ARRAY_SIZE(mx53_spdif_xtal_sel));
+	clk[IMX5_CLK_ARM]		= imx_clk_cpu("arm", "cpu_podf",
+						clk[IMX5_CLK_CPU_PODF],
+						clk[IMX5_CLK_CPU_PODF_SEL],
+						clk[IMX5_CLK_PLL1_SW],
+						clk[IMX5_CLK_STEP_SEL]);
 
 	imx_check_clocks(clk, ARRAY_SIZE(clk));
 
@@ -551,6 +560,9 @@ static void __init mx53_clocks_init(struct device_node *np)
 	/* move can bus clk to 24MHz */
 	clk_set_parent(clk[IMX5_CLK_CAN_SEL], clk[IMX5_CLK_LP_APM]);
 
+	/* make sure step clock is running from 24MHz */
+	clk_set_parent(clk[IMX5_CLK_STEP_SEL], clk[IMX5_CLK_LP_APM]);
+
 	clk_prepare_enable(clk[IMX5_CLK_IIM_GATE]);
 	imx_print_silicon_rev("i.MX53", mx53_revision());
 	clk_disable_unprepare(clk[IMX5_CLK_IIM_GATE]);
diff --git a/arch/arm/mach-imx/clk-vf610.c b/arch/arm/mach-imx/clk-vf610.c
index 4096372..5937dde 100644
--- a/arch/arm/mach-imx/clk-vf610.c
+++ b/arch/arm/mach-imx/clk-vf610.c
@@ -120,6 +120,17 @@ static unsigned int const clks_init_on[] __initconst = {
 	VF610_CLK_DDR_SEL,
 };
 
+static struct clk * __init vf610_get_fixed_clock(
+				struct device_node *ccm_node, const char *name)
+{
+	struct clk *clk = of_clk_get_by_name(ccm_node, name);
+
+	/* Backward compatibility if device tree is missing clks assignments */
+	if (IS_ERR(clk))
+		clk = imx_obtain_fixed_clock(name, 0);
+	return clk;
+};
+
 static void __init vf610_clocks_init(struct device_node *ccm_node)
 {
 	struct device_node *np;
@@ -130,13 +141,13 @@ static void __init vf610_clocks_init(struct device_node *ccm_node)
 	clk[VF610_CLK_SIRC_32K] = imx_clk_fixed("sirc_32k", 32000);
 	clk[VF610_CLK_FIRC] = imx_clk_fixed("firc", 24000000);
 
-	clk[VF610_CLK_SXOSC] = imx_obtain_fixed_clock("sxosc", 0);
-	clk[VF610_CLK_FXOSC] = imx_obtain_fixed_clock("fxosc", 0);
-	clk[VF610_CLK_AUDIO_EXT] = imx_obtain_fixed_clock("audio_ext", 0);
-	clk[VF610_CLK_ENET_EXT] = imx_obtain_fixed_clock("enet_ext", 0);
+	clk[VF610_CLK_SXOSC] = vf610_get_fixed_clock(ccm_node, "sxosc");
+	clk[VF610_CLK_FXOSC] = vf610_get_fixed_clock(ccm_node, "fxosc");
+	clk[VF610_CLK_AUDIO_EXT] = vf610_get_fixed_clock(ccm_node, "audio_ext");
+	clk[VF610_CLK_ENET_EXT] = vf610_get_fixed_clock(ccm_node, "enet_ext");
 
 	/* Clock source from external clock via LVDs PAD */
-	clk[VF610_CLK_ANACLK1] = imx_obtain_fixed_clock("anaclk1", 0);
+	clk[VF610_CLK_ANACLK1] = vf610_get_fixed_clock(ccm_node, "anaclk1");
 
 	clk[VF610_CLK_FXOSC_HALF] = imx_clk_fixed_factor("fxosc_half", "fxosc", 1, 2);
 
diff --git a/arch/arm/mach-imx/clk.h b/arch/arm/mach-imx/clk.h
index 4cdf8b6..5ef82e2 100644
--- a/arch/arm/mach-imx/clk.h
+++ b/arch/arm/mach-imx/clk.h
@@ -131,4 +131,8 @@ static inline struct clk *imx_clk_fixed_factor(const char *name,
 			CLK_SET_RATE_PARENT, mult, div);
 }
 
+struct clk *imx_clk_cpu(const char *name, const char *parent_name,
+		struct clk *div, struct clk *mux, struct clk *pll,
+		struct clk *step);
+
 #endif
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index 3d383cb..cfcdb62 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -115,6 +115,7 @@ void imx_anatop_post_resume(void);
 int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
 void imx6q_set_int_mem_clk_lpm(bool enable);
 void imx6sl_set_wait_clk(bool enter);
+int imx_mmdc_get_ddr_type(void);
 
 void imx_cpu_die(unsigned int cpu);
 int imx_cpu_kill(unsigned int cpu);
@@ -156,5 +157,6 @@ static inline void imx_init_l2cache(void) {}
 #endif
 
 extern struct smp_operations imx_smp_ops;
+extern struct smp_operations ls1021a_smp_ops;
 
 #endif
diff --git a/arch/arm/mach-imx/mach-imx53.c b/arch/arm/mach-imx/mach-imx53.c
index 18b5c5c13..86316a9 100644
--- a/arch/arm/mach-imx/mach-imx53.c
+++ b/arch/arm/mach-imx/mach-imx53.c
@@ -40,6 +40,8 @@ static void __init imx53_dt_init(void)
 static void __init imx53_init_late(void)
 {
 	imx53_pm_init();
+
+	platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
 }
 
 static const char * const imx53_dt_board_compat[] __initconst = {
diff --git a/arch/arm/mach-imx/mach-imx6sx.c b/arch/arm/mach-imx/mach-imx6sx.c
index 4111c0f..7a96c65 100644
--- a/arch/arm/mach-imx/mach-imx6sx.c
+++ b/arch/arm/mach-imx/mach-imx6sx.c
@@ -8,12 +8,62 @@
 
 #include <linux/irqchip.h>
 #include <linux/of_platform.h>
+#include <linux/phy.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
 #include "common.h"
 #include "cpuidle.h"
 
+static int ar8031_phy_fixup(struct phy_device *dev)
+{
+	u16 val;
+
+	/* Set RGMII IO voltage to 1.8V */
+	phy_write(dev, 0x1d, 0x1f);
+	phy_write(dev, 0x1e, 0x8);
+
+	/* introduce tx clock delay */
+	phy_write(dev, 0x1d, 0x5);
+	val = phy_read(dev, 0x1e);
+	val |= 0x0100;
+	phy_write(dev, 0x1e, val);
+
+	return 0;
+}
+
+#define PHY_ID_AR8031   0x004dd074
+static void __init imx6sx_enet_phy_init(void)
+{
+	if (IS_BUILTIN(CONFIG_PHYLIB))
+		phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffff,
+					   ar8031_phy_fixup);
+}
+
+static void __init imx6sx_enet_clk_sel(void)
+{
+	struct regmap *gpr;
+
+	gpr = syscon_regmap_lookup_by_compatible("fsl,imx6sx-iomuxc-gpr");
+	if (!IS_ERR(gpr)) {
+		regmap_update_bits(gpr, IOMUXC_GPR1,
+				   IMX6SX_GPR1_FEC_CLOCK_MUX_SEL_MASK, 0);
+		regmap_update_bits(gpr, IOMUXC_GPR1,
+				   IMX6SX_GPR1_FEC_CLOCK_PAD_DIR_MASK, 0);
+	} else {
+		pr_err("failed to find fsl,imx6sx-iomux-gpr regmap\n");
+	}
+}
+
+static inline void imx6sx_enet_init(void)
+{
+	imx6sx_enet_phy_init();
+	imx6sx_enet_clk_sel();
+}
+
 static void __init imx6sx_init_machine(void)
 {
 	struct device *parent;
@@ -24,6 +74,7 @@ static void __init imx6sx_init_machine(void)
 
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
 
+	imx6sx_enet_init();
 	imx_anatop_init();
 	imx6sx_pm_init();
 }
diff --git a/arch/arm/mach-imx/mach-ls1021a.c b/arch/arm/mach-imx/mach-ls1021a.c
new file mode 100644
index 0000000..b89c858
--- /dev/null
+++ b/arch/arm/mach-imx/mach-ls1021a.c
@@ -0,0 +1,22 @@
+/*
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <asm/mach/arch.h>
+
+#include "common.h"
+
+static const char * const ls1021a_dt_compat[] __initconst = {
+	"fsl,ls1021a",
+	NULL,
+};
+
+DT_MACHINE_START(LS1021A, "Freescale LS1021A")
+	.smp		= smp_ops(ls1021a_smp_ops),
+	.dt_compat	= ls1021a_dt_compat,
+MACHINE_END
diff --git a/arch/arm/mach-imx/mmdc.c b/arch/arm/mach-imx/mmdc.c
index 7a9686a..3729d90 100644
--- a/arch/arm/mach-imx/mmdc.c
+++ b/arch/arm/mach-imx/mmdc.c
@@ -21,6 +21,12 @@
 #define BP_MMDC_MAPSR_PSD	0
 #define BP_MMDC_MAPSR_PSS	4
 
+#define MMDC_MDMISC		0x18
+#define BM_MMDC_MDMISC_DDR_TYPE	0x18
+#define BP_MMDC_MDMISC_DDR_TYPE	0x3
+
+static int ddr_type;
+
 static int imx_mmdc_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
@@ -31,6 +37,12 @@ static int imx_mmdc_probe(struct platform_device *pdev)
 	mmdc_base = of_iomap(np, 0);
 	WARN_ON(!mmdc_base);
 
+	reg = mmdc_base + MMDC_MDMISC;
+	/* Get ddr type */
+	val = readl_relaxed(reg);
+	ddr_type = (val & BM_MMDC_MDMISC_DDR_TYPE) >>
+		 BP_MMDC_MDMISC_DDR_TYPE;
+
 	reg = mmdc_base + MMDC_MAPSR;
 
 	/* Enable automatic power saving */
@@ -51,6 +63,11 @@ static int imx_mmdc_probe(struct platform_device *pdev)
 	return 0;
 }
 
+int imx_mmdc_get_ddr_type(void)
+{
+	return ddr_type;
+}
+
 static struct of_device_id imx_mmdc_dt_ids[] = {
 	{ .compatible = "fsl,imx6q-mmdc", },
 	{ /* sentinel */ }
diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h
index 17a41ca..4c1343d 100644
--- a/arch/arm/mach-imx/mxc.h
+++ b/arch/arm/mach-imx/mxc.h
@@ -55,6 +55,8 @@
 #define IMX_CHIP_REVISION_3_3		0x33
 #define IMX_CHIP_REVISION_UNKNOWN	0xff
 
+#define IMX_DDR_TYPE_LPDDR2		1
+
 #ifndef __ASSEMBLY__
 extern unsigned int __mxc_cpu_type;
 #endif
diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c
index 771bd25..7f27001 100644
--- a/arch/arm/mach-imx/platsmp.c
+++ b/arch/arm/mach-imx/platsmp.c
@@ -11,7 +11,10 @@
  */
 
 #include <linux/init.h>
+#include <linux/of_address.h>
+#include <linux/of.h>
 #include <linux/smp.h>
+
 #include <asm/cacheflush.h>
 #include <asm/page.h>
 #include <asm/smp_scu.h>
@@ -94,3 +97,33 @@ struct smp_operations  imx_smp_ops __initdata = {
 	.cpu_kill		= imx_cpu_kill,
 #endif
 };
+
+#define DCFG_CCSR_SCRATCHRW1	0x200
+
+static int ls1021a_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+
+	return 0;
+}
+
+static void __init ls1021a_smp_prepare_cpus(unsigned int max_cpus)
+{
+	struct device_node *np;
+	void __iomem *dcfg_base;
+	unsigned long paddr;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,ls1021a-dcfg");
+	dcfg_base = of_iomap(np, 0);
+	BUG_ON(!dcfg_base);
+
+	paddr = virt_to_phys(secondary_startup);
+	writel_relaxed(cpu_to_be32(paddr), dcfg_base + DCFG_CCSR_SCRATCHRW1);
+
+	iounmap(dcfg_base);
+}
+
+struct smp_operations  ls1021a_smp_ops __initdata = {
+	.smp_prepare_cpus	= ls1021a_smp_prepare_cpus,
+	.smp_boot_secondary	= ls1021a_boot_secondary,
+};
diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c
index d815d1b..5d2c1bd 100644
--- a/arch/arm/mach-imx/pm-imx6.c
+++ b/arch/arm/mach-imx/pm-imx6.c
@@ -88,7 +88,7 @@ struct imx6_pm_base {
 };
 
 struct imx6_pm_socdata {
-	u32 cpu_type;
+	u32 ddr_type;
 	const char *mmdc_compat;
 	const char *src_compat;
 	const char *iomuxc_compat;
@@ -138,7 +138,6 @@ static const u32 imx6sx_mmdc_io_offset[] __initconst = {
 };
 
 static const struct imx6_pm_socdata imx6q_pm_data __initconst = {
-	.cpu_type = MXC_CPU_IMX6Q,
 	.mmdc_compat = "fsl,imx6q-mmdc",
 	.src_compat = "fsl,imx6q-src",
 	.iomuxc_compat = "fsl,imx6q-iomuxc",
@@ -148,7 +147,6 @@ static const struct imx6_pm_socdata imx6q_pm_data __initconst = {
 };
 
 static const struct imx6_pm_socdata imx6dl_pm_data __initconst = {
-	.cpu_type = MXC_CPU_IMX6DL,
 	.mmdc_compat = "fsl,imx6q-mmdc",
 	.src_compat = "fsl,imx6q-src",
 	.iomuxc_compat = "fsl,imx6dl-iomuxc",
@@ -158,7 +156,6 @@ static const struct imx6_pm_socdata imx6dl_pm_data __initconst = {
 };
 
 static const struct imx6_pm_socdata imx6sl_pm_data __initconst = {
-	.cpu_type = MXC_CPU_IMX6SL,
 	.mmdc_compat = "fsl,imx6sl-mmdc",
 	.src_compat = "fsl,imx6sl-src",
 	.iomuxc_compat = "fsl,imx6sl-iomuxc",
@@ -168,7 +165,6 @@ static const struct imx6_pm_socdata imx6sl_pm_data __initconst = {
 };
 
 static const struct imx6_pm_socdata imx6sx_pm_data __initconst = {
-	.cpu_type = MXC_CPU_IMX6SX,
 	.mmdc_compat = "fsl,imx6sx-mmdc",
 	.src_compat = "fsl,imx6sx-src",
 	.iomuxc_compat = "fsl,imx6sx-iomuxc",
@@ -187,7 +183,7 @@ static const struct imx6_pm_socdata imx6sx_pm_data __initconst = {
 struct imx6_cpu_pm_info {
 	phys_addr_t pbase; /* The physical address of pm_info. */
 	phys_addr_t resume_addr; /* The physical resume address for asm code */
-	u32 cpu_type;
+	u32 ddr_type;
 	u32 pm_info_size; /* Size of pm_info. */
 	struct imx6_pm_base mmdc_base;
 	struct imx6_pm_base src_base;
@@ -521,7 +517,7 @@ static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata)
 		goto pl310_cache_map_failed;
 	}
 
-	pm_info->cpu_type = socdata->cpu_type;
+	pm_info->ddr_type = imx_mmdc_get_ddr_type();
 	pm_info->mmdc_io_num = socdata->mmdc_io_num;
 	mmdc_offset_array = socdata->mmdc_io_offset;
 
diff --git a/arch/arm/mach-imx/suspend-imx6.S b/arch/arm/mach-imx/suspend-imx6.S
index ca4ea2d..b99987b 100644
--- a/arch/arm/mach-imx/suspend-imx6.S
+++ b/arch/arm/mach-imx/suspend-imx6.S
@@ -45,7 +45,7 @@
  */
 #define PM_INFO_PBASE_OFFSET			0x0
 #define PM_INFO_RESUME_ADDR_OFFSET		0x4
-#define PM_INFO_CPU_TYPE_OFFSET			0x8
+#define PM_INFO_DDR_TYPE_OFFSET			0x8
 #define PM_INFO_PM_INFO_SIZE_OFFSET		0xC
 #define PM_INFO_MX6Q_MMDC_P_OFFSET		0x10
 #define PM_INFO_MX6Q_MMDC_V_OFFSET		0x14
@@ -110,7 +110,7 @@
 	ldreq	r11, [r0, #PM_INFO_MX6Q_MMDC_V_OFFSET]
 	ldrne	r11, [r0, #PM_INFO_MX6Q_MMDC_P_OFFSET]
 
-	cmp 	r3, #MXC_CPU_IMX6SL
+	cmp	r3, #IMX_DDR_TYPE_LPDDR2
 	bne	4f
 
 	/* reset read FIFO, RST_RD_FIFO */
@@ -151,7 +151,7 @@
 ENTRY(imx6_suspend)
 	ldr	r1, [r0, #PM_INFO_PBASE_OFFSET]
 	ldr	r2, [r0, #PM_INFO_RESUME_ADDR_OFFSET]
-	ldr	r3, [r0, #PM_INFO_CPU_TYPE_OFFSET]
+	ldr	r3, [r0, #PM_INFO_DDR_TYPE_OFFSET]
 	ldr	r4, [r0, #PM_INFO_PM_INFO_SIZE_OFFSET]
 
 	/*
@@ -209,8 +209,8 @@ poll_dvfs_set:
 	ldr	r7, [r0, #PM_INFO_MMDC_IO_NUM_OFFSET]
 	ldr	r8, =PM_INFO_MMDC_IO_VAL_OFFSET
 	add	r8, r8, r0
-	/* i.MX6SL's last 3 IOs need special setting */
-	cmp	r3, #MXC_CPU_IMX6SL
+	/* LPDDR2's last 3 IOs need special setting */
+	cmp	r3, #IMX_DDR_TYPE_LPDDR2
 	subeq	r7, r7, #0x3
 set_mmdc_io_lpm:
 	ldr	r9, [r8], #0x8
@@ -218,7 +218,7 @@ set_mmdc_io_lpm:
 	subs	r7, r7, #0x1
 	bne	set_mmdc_io_lpm
 
-	cmp 	r3, #MXC_CPU_IMX6SL
+	cmp 	r3, #IMX_DDR_TYPE_LPDDR2
 	bne	set_mmdc_io_lpm_done
 	ldr	r6, =0x1000
 	ldr	r9, [r8], #0x8
@@ -324,7 +324,7 @@ resume:
 	str	r7, [r11, #MX6Q_SRC_GPR1]
 	str	r7, [r11, #MX6Q_SRC_GPR2]
 
-	ldr	r3, [r0, #PM_INFO_CPU_TYPE_OFFSET]
+	ldr	r3, [r0, #PM_INFO_DDR_TYPE_OFFSET]
 	mov	r5, #0x1
 	resume_mmdc
 
diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig
index c455e97..02d0834 100644
--- a/arch/arm/mach-integrator/Kconfig
+++ b/arch/arm/mach-integrator/Kconfig
@@ -1,3 +1,26 @@
+config ARCH_INTEGRATOR
+	bool "ARM Ltd. Integrator family" if (ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V6)
+	select ARM_AMBA
+	select ARM_PATCH_PHYS_VIRT if MMU
+	select AUTO_ZRELADDR
+	select COMMON_CLK
+	select COMMON_CLK_VERSATILE
+	select GENERIC_CLOCKEVENTS
+	select HAVE_TCM
+	select ICST
+	select MFD_SYSCON
+	select MULTI_IRQ_HANDLER
+	select PLAT_VERSATILE
+	select POWER_RESET
+	select POWER_RESET_VERSATILE
+	select POWER_SUPPLY
+	select SOC_INTEGRATOR_CM
+	select SPARSE_IRQ
+	select USE_OF
+	select VERSATILE_FPGA_IRQ
+	help
+	  Support for ARM's Integrator platform.
+
 if ARCH_INTEGRATOR
 
 menu "Integrator Options"
diff --git a/arch/arm/mach-integrator/Makefile b/arch/arm/mach-integrator/Makefile
index ec759de..1ebe453 100644
--- a/arch/arm/mach-integrator/Makefile
+++ b/arch/arm/mach-integrator/Makefile
@@ -4,7 +4,7 @@
 
 # Object file lists.
 
-obj-y					:= core.o lm.o leds.o
+obj-y					:= core.o lm.o
 obj-$(CONFIG_ARCH_INTEGRATOR_AP)	+= integrator_ap.o
 obj-$(CONFIG_ARCH_INTEGRATOR_CP)	+= integrator_cp.o
 
diff --git a/arch/arm/mach-integrator/cm.h b/arch/arm/mach-integrator/cm.h
index 4ecff7b..5b8ba82 100644
--- a/arch/arm/mach-integrator/cm.h
+++ b/arch/arm/mach-integrator/cm.h
@@ -11,7 +11,6 @@ void cm_clear_irqs(void);
 #define CM_CTRL_LED			(1 << 0)
 #define CM_CTRL_nMBDET			(1 << 1)
 #define CM_CTRL_REMAP			(1 << 2)
-#define CM_CTRL_RESET			(1 << 3)
 
 /*
  * Integrator/AP,PP2 specific
diff --git a/arch/arm/mach-integrator/common.h b/arch/arm/mach-integrator/common.h
index ad0ac554..96c9dc5 100644
--- a/arch/arm/mach-integrator/common.h
+++ b/arch/arm/mach-integrator/common.h
@@ -4,5 +4,3 @@ extern struct amba_pl010_data ap_uart_data;
 void integrator_init_early(void);
 int integrator_init(bool is_cp);
 void integrator_reserve(void);
-void integrator_restart(enum reboot_mode, const char *);
-void integrator_init_sysfs(struct device *parent, u32 id);
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index e3f3aca..948872a 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -60,40 +60,6 @@ void cm_control(u32 mask, u32 set)
 	raw_spin_unlock_irqrestore(&cm_lock, flags);
 }
 
-static const char *integrator_arch_str(u32 id)
-{
-	switch ((id >> 16) & 0xff) {
-	case 0x00:
-		return "ASB little-endian";
-	case 0x01:
-		return "AHB little-endian";
-	case 0x03:
-		return "AHB-Lite system bus, bi-endian";
-	case 0x04:
-		return "AHB";
-	case 0x08:
-		return "AHB system bus, ASB processor bus";
-	default:
-		return "Unknown";
-	}
-}
-
-static const char *integrator_fpga_str(u32 id)
-{
-	switch ((id >> 12) & 0xf) {
-	case 0x01:
-		return "XC4062";
-	case 0x02:
-		return "XC4085";
-	case 0x03:
-		return "XVC600";
-	case 0x04:
-		return "EPM7256AE (Altera PLD)";
-	default:
-		return "Unknown";
-	}
-}
-
 void cm_clear_irqs(void)
 {
 	/* disable core module IRQs */
@@ -109,7 +75,6 @@ static const struct of_device_id cm_match[] = {
 void cm_init(void)
 {
 	struct device_node *cm = of_find_matching_node(NULL, cm_match);
-	u32 val;
 
 	if (!cm) {
 		pr_crit("no core module node found in device tree\n");
@@ -121,13 +86,6 @@ void cm_init(void)
 		return;
 	}
 	cm_clear_irqs();
-	val = readl(cm_base + INTEGRATOR_HDR_ID_OFFSET);
-	pr_info("Detected ARM core module:\n");
-	pr_info("    Manufacturer: %02x\n", (val >> 24));
-	pr_info("    Architecture: %s\n", integrator_arch_str(val));
-	pr_info("    FPGA: %s\n", integrator_fpga_str(val));
-	pr_info("    Build: %02x\n", (val >> 4) & 0xFF);
-	pr_info("    Rev: %c\n", ('A' + (val & 0x03)));
 }
 
 /*
@@ -139,64 +97,3 @@ void __init integrator_reserve(void)
 {
 	memblock_reserve(PHYS_OFFSET, __pa(swapper_pg_dir) - PHYS_OFFSET);
 }
-
-/*
- * To reset, we hit the on-board reset register in the system FPGA
- */
-void integrator_restart(enum reboot_mode mode, const char *cmd)
-{
-	cm_control(CM_CTRL_RESET, CM_CTRL_RESET);
-}
-
-static u32 integrator_id;
-
-static ssize_t intcp_get_manf(struct device *dev,
-			      struct device_attribute *attr,
-			      char *buf)
-{
-	return sprintf(buf, "%02x\n", integrator_id >> 24);
-}
-
-static struct device_attribute intcp_manf_attr =
-	__ATTR(manufacturer,  S_IRUGO, intcp_get_manf,  NULL);
-
-static ssize_t intcp_get_arch(struct device *dev,
-			      struct device_attribute *attr,
-			      char *buf)
-{
-	return sprintf(buf, "%s\n", integrator_arch_str(integrator_id));
-}
-
-static struct device_attribute intcp_arch_attr =
-	__ATTR(architecture,  S_IRUGO, intcp_get_arch,  NULL);
-
-static ssize_t intcp_get_fpga(struct device *dev,
-			      struct device_attribute *attr,
-			      char *buf)
-{
-	return sprintf(buf, "%s\n", integrator_fpga_str(integrator_id));
-}
-
-static struct device_attribute intcp_fpga_attr =
-	__ATTR(fpga,  S_IRUGO, intcp_get_fpga,  NULL);
-
-static ssize_t intcp_get_build(struct device *dev,
-			       struct device_attribute *attr,
-			       char *buf)
-{
-	return sprintf(buf, "%02x\n", (integrator_id >> 4) & 0xFF);
-}
-
-static struct device_attribute intcp_build_attr =
-	__ATTR(build,  S_IRUGO, intcp_get_build,  NULL);
-
-
-
-void integrator_init_sysfs(struct device *parent, u32 id)
-{
-	integrator_id = id;
-	device_create_file(parent, &intcp_manf_attr);
-	device_create_file(parent, &intcp_arch_attr);
-	device_create_file(parent, &intcp_fpga_attr);
-	device_create_file(parent, &intcp_build_attr);
-}
diff --git a/arch/arm/mach-integrator/include/mach/uncompress.h b/arch/arm/mach-integrator/include/mach/uncompress.h
deleted file mode 100644
index 8f3cc99..0000000
--- a/arch/arm/mach-integrator/include/mach/uncompress.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- *  arch/arm/mach-integrator/include/mach/uncompress.h
- *
- *  Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define AMBA_UART_DR	(*(volatile unsigned char *)0x16000000)
-#define AMBA_UART_LCRH	(*(volatile unsigned char *)0x16000008)
-#define AMBA_UART_LCRM	(*(volatile unsigned char *)0x1600000c)
-#define AMBA_UART_LCRL	(*(volatile unsigned char *)0x16000010)
-#define AMBA_UART_CR	(*(volatile unsigned char *)0x16000014)
-#define AMBA_UART_FR	(*(volatile unsigned char *)0x16000018)
-
-/*
- * This does not append a newline
- */
-static void putc(int c)
-{
-	while (AMBA_UART_FR & (1 << 5))
-		barrier();
-
-	AMBA_UART_DR = c;
-}
-
-static inline void flush(void)
-{
-	while (AMBA_UART_FR & (1 << 3))
-		barrier();
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index 8ca290b..30003ba 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -27,22 +27,15 @@
 #include <linux/syscore_ops.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/kmi.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/irqchip.h>
 #include <linux/mtd/physmap.h>
-#include <linux/clk.h>
 #include <linux/platform_data/clk-integrator.h>
 #include <linux/of_irq.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/stat.h>
-#include <linux/sys_soc.h>
 #include <linux/termios.h>
-#include <linux/sched_clock.h>
-#include <linux/clk-provider.h>
 
 #include <asm/hardware/arm_timer.h>
 #include <asm/setup.h>
@@ -89,11 +82,6 @@ static void __iomem *ebi_base;
 
 static struct map_desc ap_io_desc[] __initdata __maybe_unused = {
 	{
-		.virtual	= IO_ADDRESS(INTEGRATOR_CT_BASE),
-		.pfn		= __phys_to_pfn(INTEGRATOR_CT_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
 		.virtual	= IO_ADDRESS(INTEGRATOR_IC_BASE),
 		.pfn		= __phys_to_pfn(INTEGRATOR_IC_BASE),
 		.length		= SZ_4K,
@@ -257,188 +245,10 @@ struct amba_pl010_data ap_uart_data = {
 	.set_mctrl = integrator_uart_set_mctrl,
 };
 
-/*
- * Where is the timer (VA)?
- */
-#define TIMER0_VA_BASE __io_address(INTEGRATOR_TIMER0_BASE)
-#define TIMER1_VA_BASE __io_address(INTEGRATOR_TIMER1_BASE)
-#define TIMER2_VA_BASE __io_address(INTEGRATOR_TIMER2_BASE)
-
-static unsigned long timer_reload;
-
-static u64 notrace integrator_read_sched_clock(void)
-{
-	return -readl((void __iomem *) TIMER2_VA_BASE + TIMER_VALUE);
-}
-
-static void integrator_clocksource_init(unsigned long inrate,
-					void __iomem *base)
-{
-	u32 ctrl = TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC;
-	unsigned long rate = inrate;
-
-	if (rate >= 1500000) {
-		rate /= 16;
-		ctrl |= TIMER_CTRL_DIV16;
-	}
-
-	writel(0xffff, base + TIMER_LOAD);
-	writel(ctrl, base + TIMER_CTRL);
-
-	clocksource_mmio_init(base + TIMER_VALUE, "timer2",
-			rate, 200, 16, clocksource_mmio_readl_down);
-	sched_clock_register(integrator_read_sched_clock, 16, rate);
-}
-
-static void __iomem * clkevt_base;
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t integrator_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = dev_id;
-
-	/* clear the interrupt */
-	writel(1, clkevt_base + TIMER_INTCLR);
-
-	evt->event_handler(evt);
-
-	return IRQ_HANDLED;
-}
-
-static void clkevt_set_mode(enum clock_event_mode mode, struct clock_event_device *evt)
-{
-	u32 ctrl = readl(clkevt_base + TIMER_CTRL) & ~TIMER_CTRL_ENABLE;
-
-	/* Disable timer */
-	writel(ctrl, clkevt_base + TIMER_CTRL);
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		/* Enable the timer and start the periodic tick */
-		writel(timer_reload, clkevt_base + TIMER_LOAD);
-		ctrl |= TIMER_CTRL_PERIODIC | TIMER_CTRL_ENABLE;
-		writel(ctrl, clkevt_base + TIMER_CTRL);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* Leave the timer disabled, .set_next_event will enable it */
-		ctrl &= ~TIMER_CTRL_PERIODIC;
-		writel(ctrl, clkevt_base + TIMER_CTRL);
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_RESUME:
-	default:
-		/* Just leave in disabled state */
-		break;
-	}
-
-}
-
-static int clkevt_set_next_event(unsigned long next, struct clock_event_device *evt)
-{
-	unsigned long ctrl = readl(clkevt_base + TIMER_CTRL);
-
-	writel(ctrl & ~TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL);
-	writel(next, clkevt_base + TIMER_LOAD);
-	writel(ctrl | TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL);
-
-	return 0;
-}
-
-static struct clock_event_device integrator_clockevent = {
-	.name		= "timer1",
-	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_mode	= clkevt_set_mode,
-	.set_next_event	= clkevt_set_next_event,
-	.rating		= 300,
-};
-
-static struct irqaction integrator_timer_irq = {
-	.name		= "timer",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= integrator_timer_interrupt,
-	.dev_id		= &integrator_clockevent,
-};
-
-static void integrator_clockevent_init(unsigned long inrate,
-				void __iomem *base, int irq)
-{
-	unsigned long rate = inrate;
-	unsigned int ctrl = 0;
-
-	clkevt_base = base;
-	/* Calculate and program a divisor */
-	if (rate > 0x100000 * HZ) {
-		rate /= 256;
-		ctrl |= TIMER_CTRL_DIV256;
-	} else if (rate > 0x10000 * HZ) {
-		rate /= 16;
-		ctrl |= TIMER_CTRL_DIV16;
-	}
-	timer_reload = rate / HZ;
-	writel(ctrl, clkevt_base + TIMER_CTRL);
-
-	setup_irq(irq, &integrator_timer_irq);
-	clockevents_config_and_register(&integrator_clockevent,
-					rate,
-					1,
-					0xffffU);
-}
-
 void __init ap_init_early(void)
 {
 }
 
-static void __init ap_of_timer_init(void)
-{
-	struct device_node *node;
-	const char *path;
-	void __iomem *base;
-	int err;
-	int irq;
-	struct clk *clk;
-	unsigned long rate;
-
-	of_clk_init(NULL);
-
-	err = of_property_read_string(of_aliases,
-				"arm,timer-primary", &path);
-	if (WARN_ON(err))
-		return;
-	node = of_find_node_by_path(path);
-	base = of_iomap(node, 0);
-	if (WARN_ON(!base))
-		return;
-
-	clk = of_clk_get(node, 0);
-	BUG_ON(IS_ERR(clk));
-	clk_prepare_enable(clk);
-	rate = clk_get_rate(clk);
-
-	writel(0, base + TIMER_CTRL);
-	integrator_clocksource_init(rate, base);
-
-	err = of_property_read_string(of_aliases,
-				"arm,timer-secondary", &path);
-	if (WARN_ON(err))
-		return;
-	node = of_find_node_by_path(path);
-	base = of_iomap(node, 0);
-	if (WARN_ON(!base))
-		return;
-	irq = irq_of_parse_and_map(node, 0);
-
-	clk = of_clk_get(node, 0);
-	BUG_ON(IS_ERR(clk));
-	clk_prepare_enable(clk);
-	rate = clk_get_rate(clk);
-
-	writel(0, base + TIMER_CTRL);
-	integrator_clockevent_init(rate, base, irq);
-}
-
 static void __init ap_init_irq_of(void)
 {
 	cm_init();
@@ -477,10 +287,6 @@ static void __init ap_init_of(void)
 	unsigned long sc_dec;
 	struct device_node *syscon;
 	struct device_node *ebi;
-	struct device *parent;
-	struct soc_device *soc_dev;
-	struct soc_device_attribute *soc_dev_attr;
-	u32 ap_sc_id;
 	int i;
 
 	syscon = of_find_matching_node(NULL, ap_syscon_match);
@@ -500,28 +306,6 @@ static void __init ap_init_of(void)
 	of_platform_populate(NULL, of_default_bus_match_table,
 			ap_auxdata_lookup, NULL);
 
-	ap_sc_id = readl(ap_syscon_base);
-
-	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
-	if (!soc_dev_attr)
-		return;
-
-	soc_dev_attr->soc_id = "XVC";
-	soc_dev_attr->machine = "Integrator/AP";
-	soc_dev_attr->family = "Integrator";
-	soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%c",
-					   'A' + (ap_sc_id & 0x0f));
-
-	soc_dev = soc_device_register(soc_dev_attr);
-	if (IS_ERR(soc_dev)) {
-		kfree(soc_dev_attr->revision);
-		kfree(soc_dev_attr);
-		return;
-	}
-
-	parent = soc_device_to_device(soc_dev);
-	integrator_init_sysfs(parent, ap_sc_id);
-
 	sc_dec = readl(ap_syscon_base + INTEGRATOR_SC_DEC_OFFSET);
 	for (i = 0; i < 4; i++) {
 		struct lm_device *lmdev;
@@ -553,8 +337,6 @@ DT_MACHINE_START(INTEGRATOR_AP_DT, "ARM Integrator/AP (Device Tree)")
 	.map_io		= ap_map_io,
 	.init_early	= ap_init_early,
 	.init_irq	= ap_init_irq_of,
-	.init_time	= ap_of_timer_init,
 	.init_machine	= ap_init_of,
-	.restart	= integrator_restart,
 	.dt_compat      = ap_dt_board_compat,
 MACHINE_END
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index cca02eb..b5fb71a 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -27,7 +27,6 @@
 #include <linux/of_irq.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
-#include <linux/sys_soc.h>
 #include <linux/sched_clock.h>
 
 #include <asm/setup.h>
@@ -274,10 +273,6 @@ static const struct of_device_id intcp_syscon_match[] = {
 static void __init intcp_init_of(void)
 {
 	struct device_node *cpcon;
-	struct device *parent;
-	struct soc_device *soc_dev;
-	struct soc_device_attribute *soc_dev_attr;
-	u32 intcp_sc_id;
 
 	cpcon = of_find_matching_node(NULL, intcp_syscon_match);
 	if (!cpcon)
@@ -289,28 +284,6 @@ static void __init intcp_init_of(void)
 
 	of_platform_populate(NULL, of_default_bus_match_table,
 			     intcp_auxdata_lookup, NULL);
-
-	intcp_sc_id = readl(intcp_con_base);
-
-	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
-	if (!soc_dev_attr)
-		return;
-
-	soc_dev_attr->soc_id = "XCV";
-	soc_dev_attr->machine = "Integrator/CP";
-	soc_dev_attr->family = "Integrator";
-	soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%c",
-					   'A' + (intcp_sc_id & 0x0f));
-
-	soc_dev = soc_device_register(soc_dev_attr);
-	if (IS_ERR(soc_dev)) {
-		kfree(soc_dev_attr->revision);
-		kfree(soc_dev_attr);
-		return;
-	}
-
-	parent = soc_device_to_device(soc_dev);
-	integrator_init_sysfs(parent, intcp_sc_id);
 }
 
 static const char * intcp_dt_board_compat[] = {
@@ -324,6 +297,5 @@ DT_MACHINE_START(INTEGRATOR_CP_DT, "ARM Integrator/CP (Device Tree)")
 	.init_early	= intcp_init_early,
 	.init_irq	= intcp_init_irq_of,
 	.init_machine	= intcp_init_of,
-	.restart	= integrator_restart,
 	.dt_compat      = intcp_dt_board_compat,
 MACHINE_END
diff --git a/arch/arm/mach-integrator/leds.c b/arch/arm/mach-integrator/leds.c
deleted file mode 100644
index f1dcb57..0000000
--- a/arch/arm/mach-integrator/leds.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * Driver for the 4 user LEDs found on the Integrator AP/CP baseboard
- * Based on Versatile and RealView machine LED code
- *
- * License terms: GNU General Public License (GPL) version 2
- * Author: Bryan Wu <bryan.wu@canonical.com>
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/leds.h>
-
-#include "hardware.h"
-#include "cm.h"
-
-#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
-
-#define ALPHA_REG __io_address(INTEGRATOR_DBG_BASE)
-#define LEDREG	(__io_address(INTEGRATOR_DBG_BASE) + INTEGRATOR_DBG_LEDS_OFFSET)
-
-struct integrator_led {
-	struct led_classdev	cdev;
-	u8			mask;
-};
-
-/*
- * The triggers lines up below will only be used if the
- * LED triggers are compiled in.
- */
-static const struct {
-	const char *name;
-	const char *trigger;
-} integrator_leds[] = {
-	{ "integrator:green0", "heartbeat", },
-	{ "integrator:yellow", },
-	{ "integrator:red", },
-	{ "integrator:green1", },
-	{ "integrator:core_module", "cpu0", },
-};
-
-static void integrator_led_set(struct led_classdev *cdev,
-			      enum led_brightness b)
-{
-	struct integrator_led *led = container_of(cdev,
-						 struct integrator_led, cdev);
-	u32 reg = __raw_readl(LEDREG);
-
-	if (b != LED_OFF)
-		reg |= led->mask;
-	else
-		reg &= ~led->mask;
-
-	while (__raw_readl(ALPHA_REG) & 1)
-		cpu_relax();
-
-	__raw_writel(reg, LEDREG);
-}
-
-static enum led_brightness integrator_led_get(struct led_classdev *cdev)
-{
-	struct integrator_led *led = container_of(cdev,
-						 struct integrator_led, cdev);
-	u32 reg = __raw_readl(LEDREG);
-
-	return (reg & led->mask) ? LED_FULL : LED_OFF;
-}
-
-static void cm_led_set(struct led_classdev *cdev,
-			      enum led_brightness b)
-{
-	if (b != LED_OFF)
-		cm_control(CM_CTRL_LED, CM_CTRL_LED);
-	else
-		cm_control(CM_CTRL_LED, 0);
-}
-
-static enum led_brightness cm_led_get(struct led_classdev *cdev)
-{
-	u32 reg = cm_get();
-
-	return (reg & CM_CTRL_LED) ? LED_FULL : LED_OFF;
-}
-
-static int __init integrator_leds_init(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(integrator_leds); i++) {
-		struct integrator_led *led;
-
-		led = kzalloc(sizeof(*led), GFP_KERNEL);
-		if (!led)
-			break;
-
-
-		led->cdev.name = integrator_leds[i].name;
-
-		if (i == 4) { /* Setting for LED in core module */
-			led->cdev.brightness_set = cm_led_set;
-			led->cdev.brightness_get = cm_led_get;
-		} else {
-			led->cdev.brightness_set = integrator_led_set;
-			led->cdev.brightness_get = integrator_led_get;
-		}
-
-		led->cdev.default_trigger = integrator_leds[i].trigger;
-		led->mask = BIT(i);
-
-		if (led_classdev_register(NULL, &led->cdev) < 0) {
-			kfree(led);
-			break;
-		}
-	}
-
-	return 0;
-}
-
-/*
- * Since we may have triggers on any subsystem, defer registration
- * until after subsystem_init.
- */
-fs_initcall(integrator_leds_init);
-#endif
diff --git a/arch/arm/mach-mediatek/Kconfig b/arch/arm/mach-mediatek/Kconfig
index 2c043a2..f73f588 100644
--- a/arch/arm/mach-mediatek/Kconfig
+++ b/arch/arm/mach-mediatek/Kconfig
@@ -1,6 +1,6 @@
 config ARCH_MEDIATEK
-	bool "Mediatek MT6589 SoC" if ARCH_MULTI_V7
+	bool "Mediatek MT65xx & MT81xx SoC" if ARCH_MULTI_V7
 	select ARM_GIC
 	select MTK_TIMER
 	help
-	  Support for Mediatek Cortex-A7 Quad-Core-SoC MT6589.
+	  Support for Mediatek MT65xx & MT81xx SoCs
diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig
index 2c1154e..18301dc 100644
--- a/arch/arm/mach-meson/Kconfig
+++ b/arch/arm/mach-meson/Kconfig
@@ -2,6 +2,7 @@ menuconfig ARCH_MESON
 	bool "Amlogic Meson SoCs" if ARCH_MULTI_V7
 	select GENERIC_IRQ_CHIP
 	select ARM_GIC
+	select CACHE_L2X0
 
 if ARCH_MESON
 
@@ -10,4 +11,9 @@ config MACH_MESON6
 	default ARCH_MESON
 	select MESON6_TIMER
 
+config MACH_MESON8
+	bool "Amlogic Meson8 SoCs support"
+	default ARCH_MESON
+	select MESON6_TIMER
+
 endif
diff --git a/arch/arm/mach-meson/meson.c b/arch/arm/mach-meson/meson.c
index 5ee064f..5d6affe 100644
--- a/arch/arm/mach-meson/meson.c
+++ b/arch/arm/mach-meson/meson.c
@@ -16,12 +16,14 @@
 #include <linux/of_platform.h>
 #include <asm/mach/arch.h>
 
-static const char * const m6_common_board_compat[] = {
+static const char * const meson_common_board_compat[] = {
 	"amlogic,meson6",
+	"amlogic,meson8",
 	NULL,
 };
 
-DT_MACHINE_START(AML8726_MX, "Amlogic Meson6 platform")
-	.dt_compat	= m6_common_board_compat,
+DT_MACHINE_START(MESON, "Amlogic Meson platform")
+	.dt_compat	= meson_common_board_compat,
+	.l2c_aux_val	= 0,
+	.l2c_aux_mask	= ~0,
 MACHINE_END
-
diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile
index e24136b..b4f0149 100644
--- a/arch/arm/mach-mvebu/Makefile
+++ b/arch/arm/mach-mvebu/Makefile
@@ -7,7 +7,7 @@ CFLAGS_pmsu.o			:= -march=armv7-a
 obj-$(CONFIG_MACH_MVEBU_ANY)	 += system-controller.o mvebu-soc-id.o
 
 ifeq ($(CONFIG_MACH_MVEBU_V7),y)
-obj-y				 += cpu-reset.o board-v7.o coherency.o coherency_ll.o pmsu.o pmsu_ll.o
+obj-y				 += cpu-reset.o board-v7.o coherency.o coherency_ll.o pmsu.o pmsu_ll.o pm.o pm-board.o
 obj-$(CONFIG_SMP)		 += platsmp.o headsmp.o platsmp-a9.o headsmp-a9.o
 endif
 
diff --git a/arch/arm/mach-mvebu/armada-370-xp.h b/arch/arm/mach-mvebu/armada-370-xp.h
index 84cd90d..c55bbf8 100644
--- a/arch/arm/mach-mvebu/armada-370-xp.h
+++ b/arch/arm/mach-mvebu/armada-370-xp.h
@@ -16,14 +16,8 @@
 #define __MACH_ARMADA_370_XP_H
 
 #ifdef CONFIG_SMP
-#include <linux/cpumask.h>
-
-#define ARMADA_XP_MAX_CPUS 4
-
 void armada_xp_secondary_startup(void);
 extern struct smp_operations armada_xp_smp_ops;
 #endif
 
-int armada_370_xp_pmsu_idle_enter(unsigned long deepidle);
-
 #endif /* __MACH_ARMADA_370_XP_H */
diff --git a/arch/arm/mach-mvebu/board-v7.c b/arch/arm/mach-mvebu/board-v7.c
index d0d39f1..89a139e 100644
--- a/arch/arm/mach-mvebu/board-v7.c
+++ b/arch/arm/mach-mvebu/board-v7.c
@@ -16,10 +16,12 @@
 #include <linux/init.h>
 #include <linux/clk-provider.h>
 #include <linux/of_address.h>
+#include <linux/of_fdt.h>
 #include <linux/of_platform.h>
 #include <linux/io.h>
 #include <linux/clocksource.h>
 #include <linux/dma-mapping.h>
+#include <linux/memblock.h>
 #include <linux/mbus.h>
 #include <linux/signal.h>
 #include <linux/slab.h>
@@ -57,6 +59,54 @@ void __iomem *mvebu_get_scu_base(void)
 }
 
 /*
+ * When returning from suspend, the platform goes through the
+ * bootloader, which executes its DDR3 training code. This code has
+ * the unfortunate idea of using the first 10 KB of each DRAM bank to
+ * exercise the RAM and calculate the optimal timings. Therefore, this
+ * area of RAM is overwritten, and shouldn't be used by the kernel if
+ * suspend/resume is supported.
+ */
+
+#ifdef CONFIG_SUSPEND
+#define MVEBU_DDR_TRAINING_AREA_SZ (10 * SZ_1K)
+static int __init mvebu_scan_mem(unsigned long node, const char *uname,
+				 int depth, void *data)
+{
+	const char *type = of_get_flat_dt_prop(node, "device_type", NULL);
+	const __be32 *reg, *endp;
+	int l;
+
+	if (type == NULL || strcmp(type, "memory"))
+		return 0;
+
+	reg = of_get_flat_dt_prop(node, "linux,usable-memory", &l);
+	if (reg == NULL)
+		reg = of_get_flat_dt_prop(node, "reg", &l);
+	if (reg == NULL)
+		return 0;
+
+	endp = reg + (l / sizeof(__be32));
+	while ((endp - reg) >= (dt_root_addr_cells + dt_root_size_cells)) {
+		u64 base, size;
+
+		base = dt_mem_next_cell(dt_root_addr_cells, &reg);
+		size = dt_mem_next_cell(dt_root_size_cells, &reg);
+
+		memblock_reserve(base, MVEBU_DDR_TRAINING_AREA_SZ);
+	}
+
+	return 0;
+}
+
+static void __init mvebu_memblock_reserve(void)
+{
+	of_scan_flat_dt(mvebu_scan_mem, NULL);
+}
+#else
+static void __init mvebu_memblock_reserve(void) {}
+#endif
+
+/*
  * Early versions of Armada 375 SoC have a bug where the BootROM
  * leaves an external data abort pending. The kernel is hit by this
  * data abort as soon as it enters userspace, because it unmasks the
@@ -124,76 +174,12 @@ static void __init i2c_quirk(void)
 	return;
 }
 
-#define A375_Z1_THERMAL_FIXUP_OFFSET 0xc
-
-static void __init thermal_quirk(void)
-{
-	struct device_node *np;
-	u32 dev, rev;
-	int res;
-
-	/*
-	 * The early SoC Z1 revision needs a quirk to be applied in order
-	 * for the thermal controller to work properly. This quirk breaks
-	 * the thermal support if applied on a SoC that doesn't need it,
-	 * so we enforce the SoC revision to be known.
-	 */
-	res = mvebu_get_soc_id(&dev, &rev);
-	if (res < 0 || (res == 0 && rev > ARMADA_375_Z1_REV))
-		return;
-
-	for_each_compatible_node(np, NULL, "marvell,armada375-thermal") {
-		struct property *prop;
-		__be32 newval, *newprop, *oldprop;
-		int len;
-
-		/*
-		 * The register offset is at a wrong location. This quirk
-		 * creates a new reg property as a clone of the previous
-		 * one and corrects the offset.
-		 */
-		oldprop = (__be32 *)of_get_property(np, "reg", &len);
-		if (!oldprop)
-			continue;
-
-		/* Create a duplicate of the 'reg' property */
-		prop = kzalloc(sizeof(*prop), GFP_KERNEL);
-		prop->length = len;
-		prop->name = kstrdup("reg", GFP_KERNEL);
-		prop->value = kzalloc(len, GFP_KERNEL);
-		memcpy(prop->value, oldprop, len);
-
-		/* Fixup the register offset of the second entry */
-		oldprop += 2;
-		newprop = (__be32 *)prop->value + 2;
-		newval = cpu_to_be32(be32_to_cpu(*oldprop) -
-				     A375_Z1_THERMAL_FIXUP_OFFSET);
-		*newprop = newval;
-		of_update_property(np, prop);
-
-		/*
-		 * The thermal controller needs some quirk too, so let's change
-		 * the compatible string to reflect this and allow the driver
-		 * the take the necessary action.
-		 */
-		prop = kzalloc(sizeof(*prop), GFP_KERNEL);
-		prop->name = kstrdup("compatible", GFP_KERNEL);
-		prop->length = sizeof("marvell,armada375-z1-thermal");
-		prop->value = kstrdup("marvell,armada375-z1-thermal",
-						GFP_KERNEL);
-		of_update_property(np, prop);
-	}
-	return;
-}
-
 static void __init mvebu_dt_init(void)
 {
 	if (of_machine_is_compatible("marvell,armadaxp"))
 		i2c_quirk();
-	if (of_machine_is_compatible("marvell,a375-db")) {
+	if (of_machine_is_compatible("marvell,a375-db"))
 		external_abort_quirk();
-		thermal_quirk();
-	}
 
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
@@ -206,10 +192,16 @@ static const char * const armada_370_xp_dt_compat[] = {
 DT_MACHINE_START(ARMADA_370_XP_DT, "Marvell Armada 370/XP (Device Tree)")
 	.l2c_aux_val	= 0,
 	.l2c_aux_mask	= ~0,
+/*
+ * The following field (.smp) is still needed to ensure backward
+ * compatibility with old Device Trees that were not specifying the
+ * cpus enable-method property.
+ */
 	.smp		= smp_ops(armada_xp_smp_ops),
 	.init_machine	= mvebu_dt_init,
 	.init_irq       = mvebu_init_irq,
 	.restart	= mvebu_restart,
+	.reserve        = mvebu_memblock_reserve,
 	.dt_compat	= armada_370_xp_dt_compat,
 MACHINE_END
 
diff --git a/arch/arm/mach-mvebu/coherency.c b/arch/arm/mach-mvebu/coherency.c
index 044b511..3585cb3 100644
--- a/arch/arm/mach-mvebu/coherency.c
+++ b/arch/arm/mach-mvebu/coherency.c
@@ -1,5 +1,6 @@
 /*
- * Coherency fabric (Aurora) support for Armada 370 and XP platforms.
+ * Coherency fabric (Aurora) support for Armada 370, 375, 38x and XP
+ * platforms.
  *
  * Copyright (C) 2012 Marvell
  *
@@ -11,7 +12,7 @@
  * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  *
- * The Armada 370 and Armada XP SOCs have a coherency fabric which is
+ * The Armada 370, 375, 38x and XP SOCs have a coherency fabric which is
  * responsible for ensuring hardware coherency between all CPUs and between
  * CPUs and I/O masters. This file initializes the coherency fabric and
  * supplies basic routines for configuring and controlling hardware coherency
@@ -28,12 +29,10 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/mbus.h>
-#include <linux/clk.h>
 #include <linux/pci.h>
 #include <asm/smp_plat.h>
 #include <asm/cacheflush.h>
 #include <asm/mach/map.h>
-#include "armada-370-xp.h"
 #include "coherency.h"
 #include "mvebu-soc-id.h"
 
@@ -42,8 +41,6 @@ void __iomem *coherency_base;
 static void __iomem *coherency_cpu_base;
 
 /* Coherency fabric registers */
-#define COHERENCY_FABRIC_CFG_OFFSET		   0x4
-
 #define IO_SYNC_BARRIER_CTL_OFFSET		   0x0
 
 enum {
@@ -79,157 +76,8 @@ int set_cpu_coherent(void)
 	return ll_enable_coherency();
 }
 
-/*
- * The below code implements the I/O coherency workaround on Armada
- * 375. This workaround consists in using the two channels of the
- * first XOR engine to trigger a XOR transaction that serves as the
- * I/O coherency barrier.
- */
-
-static void __iomem *xor_base, *xor_high_base;
-static dma_addr_t coherency_wa_buf_phys[CONFIG_NR_CPUS];
-static void *coherency_wa_buf[CONFIG_NR_CPUS];
-static bool coherency_wa_enabled;
-
-#define XOR_CONFIG(chan)            (0x10 + (chan * 4))
-#define XOR_ACTIVATION(chan)        (0x20 + (chan * 4))
-#define WINDOW_BAR_ENABLE(chan)     (0x240 + ((chan) << 2))
-#define WINDOW_BASE(w)              (0x250 + ((w) << 2))
-#define WINDOW_SIZE(w)              (0x270 + ((w) << 2))
-#define WINDOW_REMAP_HIGH(w)        (0x290 + ((w) << 2))
-#define WINDOW_OVERRIDE_CTRL(chan)  (0x2A0 + ((chan) << 2))
-#define XOR_DEST_POINTER(chan)      (0x2B0 + (chan * 4))
-#define XOR_BLOCK_SIZE(chan)        (0x2C0 + (chan * 4))
-#define XOR_INIT_VALUE_LOW           0x2E0
-#define XOR_INIT_VALUE_HIGH          0x2E4
-
-static inline void mvebu_hwcc_armada375_sync_io_barrier_wa(void)
-{
-	int idx = smp_processor_id();
-
-	/* Write '1' to the first word of the buffer */
-	writel(0x1, coherency_wa_buf[idx]);
-
-	/* Wait until the engine is idle */
-	while ((readl(xor_base + XOR_ACTIVATION(idx)) >> 4) & 0x3)
-		;
-
-	dmb();
-
-	/* Trigger channel */
-	writel(0x1, xor_base + XOR_ACTIVATION(idx));
-
-	/* Poll the data until it is cleared by the XOR transaction */
-	while (readl(coherency_wa_buf[idx]))
-		;
-}
-
-static void __init armada_375_coherency_init_wa(void)
-{
-	const struct mbus_dram_target_info *dram;
-	struct device_node *xor_node;
-	struct property *xor_status;
-	struct clk *xor_clk;
-	u32 win_enable = 0;
-	int i;
-
-	pr_warn("enabling coherency workaround for Armada 375 Z1, one XOR engine disabled\n");
-
-	/*
-	 * Since the workaround uses one XOR engine, we grab a
-	 * reference to its Device Tree node first.
-	 */
-	xor_node = of_find_compatible_node(NULL, NULL, "marvell,orion-xor");
-	BUG_ON(!xor_node);
-
-	/*
-	 * Then we mark it as disabled so that the real XOR driver
-	 * will not use it.
-	 */
-	xor_status = kzalloc(sizeof(struct property), GFP_KERNEL);
-	BUG_ON(!xor_status);
-
-	xor_status->value = kstrdup("disabled", GFP_KERNEL);
-	BUG_ON(!xor_status->value);
-
-	xor_status->length = 8;
-	xor_status->name = kstrdup("status", GFP_KERNEL);
-	BUG_ON(!xor_status->name);
-
-	of_update_property(xor_node, xor_status);
-
-	/*
-	 * And we remap the registers, get the clock, and do the
-	 * initial configuration of the XOR engine.
-	 */
-	xor_base = of_iomap(xor_node, 0);
-	xor_high_base = of_iomap(xor_node, 1);
-
-	xor_clk = of_clk_get_by_name(xor_node, NULL);
-	BUG_ON(!xor_clk);
-
-	clk_prepare_enable(xor_clk);
-
-	dram = mv_mbus_dram_info();
-
-	for (i = 0; i < 8; i++) {
-		writel(0, xor_base + WINDOW_BASE(i));
-		writel(0, xor_base + WINDOW_SIZE(i));
-		if (i < 4)
-			writel(0, xor_base + WINDOW_REMAP_HIGH(i));
-	}
-
-	for (i = 0; i < dram->num_cs; i++) {
-		const struct mbus_dram_window *cs = dram->cs + i;
-		writel((cs->base & 0xffff0000) |
-		       (cs->mbus_attr << 8) |
-		       dram->mbus_dram_target_id, xor_base + WINDOW_BASE(i));
-		writel((cs->size - 1) & 0xffff0000, xor_base + WINDOW_SIZE(i));
-
-		win_enable |= (1 << i);
-		win_enable |= 3 << (16 + (2 * i));
-	}
-
-	writel(win_enable, xor_base + WINDOW_BAR_ENABLE(0));
-	writel(win_enable, xor_base + WINDOW_BAR_ENABLE(1));
-	writel(0, xor_base + WINDOW_OVERRIDE_CTRL(0));
-	writel(0, xor_base + WINDOW_OVERRIDE_CTRL(1));
-
-	for (i = 0; i < CONFIG_NR_CPUS; i++) {
-		coherency_wa_buf[i] = kzalloc(PAGE_SIZE, GFP_KERNEL);
-		BUG_ON(!coherency_wa_buf[i]);
-
-		/*
-		 * We can't use the DMA mapping API, since we don't
-		 * have a valid 'struct device' pointer
-		 */
-		coherency_wa_buf_phys[i] =
-			virt_to_phys(coherency_wa_buf[i]);
-		BUG_ON(!coherency_wa_buf_phys[i]);
-
-		/*
-		 * Configure the XOR engine for memset operation, with
-		 * a 128 bytes block size
-		 */
-		writel(0x444, xor_base + XOR_CONFIG(i));
-		writel(128, xor_base + XOR_BLOCK_SIZE(i));
-		writel(coherency_wa_buf_phys[i],
-		       xor_base + XOR_DEST_POINTER(i));
-	}
-
-	writel(0x0, xor_base + XOR_INIT_VALUE_LOW);
-	writel(0x0, xor_base + XOR_INIT_VALUE_HIGH);
-
-	coherency_wa_enabled = true;
-}
-
 static inline void mvebu_hwcc_sync_io_barrier(void)
 {
-	if (coherency_wa_enabled) {
-		mvebu_hwcc_armada375_sync_io_barrier_wa();
-		return;
-	}
-
 	writel(0x1, coherency_cpu_base + IO_SYNC_BARRIER_CTL_OFFSET);
 	while (readl(coherency_cpu_base + IO_SYNC_BARRIER_CTL_OFFSET) & 0x1);
 }
@@ -361,25 +209,41 @@ static int coherency_type(void)
 {
 	struct device_node *np;
 	const struct of_device_id *match;
+	int type;
 
-	np = of_find_matching_node_and_match(NULL, of_coherency_table, &match);
-	if (np) {
-		int type = (int) match->data;
+	/*
+	 * The coherency fabric is needed:
+	 * - For coherency between processors on Armada XP, so only
+	 *   when SMP is enabled.
+	 * - For coherency between the processor and I/O devices, but
+	 *   this coherency requires many pre-requisites (write
+	 *   allocate cache policy, shareable pages, SMP bit set) that
+	 *   are only meant in SMP situations.
+	 *
+	 * Note that this means that on Armada 370, there is currently
+	 * no way to use hardware I/O coherency, because even when
+	 * CONFIG_SMP is enabled, is_smp() returns false due to the
+	 * Armada 370 being a single-core processor. To lift this
+	 * limitation, we would have to find a way to make the cache
+	 * policy set to write-allocate (on all Armada SoCs), and to
+	 * set the shareable attribute in page tables (on all Armada
+	 * SoCs except the Armada 370). Unfortunately, such decisions
+	 * are taken very early in the kernel boot process, at a point
+	 * where we don't know yet on which SoC we are running.
 
-		/* Armada 370/XP coherency works in both UP and SMP */
-		if (type == COHERENCY_FABRIC_TYPE_ARMADA_370_XP)
-			return type;
+	 */
+	if (!is_smp())
+		return COHERENCY_FABRIC_TYPE_NONE;
 
-		/* Armada 375 coherency works only on SMP */
-		else if (type == COHERENCY_FABRIC_TYPE_ARMADA_375 && is_smp())
-			return type;
+	np = of_find_matching_node_and_match(NULL, of_coherency_table, &match);
+	if (!np)
+		return COHERENCY_FABRIC_TYPE_NONE;
 
-		/* Armada 380 coherency works only on SMP */
-		else if (type == COHERENCY_FABRIC_TYPE_ARMADA_380 && is_smp())
-			return type;
-	}
+	type = (int) match->data;
 
-	return COHERENCY_FABRIC_TYPE_NONE;
+	of_node_put(np);
+
+	return type;
 }
 
 int coherency_available(void)
@@ -407,22 +271,9 @@ int __init coherency_init(void)
 
 static int __init coherency_late_init(void)
 {
-	int type = coherency_type();
-
-	if (type == COHERENCY_FABRIC_TYPE_NONE)
-		return 0;
-
-	if (type == COHERENCY_FABRIC_TYPE_ARMADA_375) {
-		u32 dev, rev;
-
-		if (mvebu_get_soc_id(&dev, &rev) == 0 &&
-		    rev == ARMADA_375_Z1_REV)
-			armada_375_coherency_init_wa();
-	}
-
-	bus_register_notifier(&platform_bus_type,
-			      &mvebu_hwcc_nb);
-
+	if (coherency_available())
+		bus_register_notifier(&platform_bus_type,
+				      &mvebu_hwcc_nb);
 	return 0;
 }
 
diff --git a/arch/arm/mach-mvebu/coherency_ll.S b/arch/arm/mach-mvebu/coherency_ll.S
index f5d881b..8b2fbc8 100644
--- a/arch/arm/mach-mvebu/coherency_ll.S
+++ b/arch/arm/mach-mvebu/coherency_ll.S
@@ -24,7 +24,10 @@
 #include <asm/cp15.h>
 
 	.text
-/* Returns the coherency base address in r1 (r0 is untouched) */
+/*
+ * Returns the coherency base address in r1 (r0 is untouched), or 0 if
+ * the coherency fabric is not enabled.
+ */
 ENTRY(ll_get_coherency_base)
 	mrc	p15, 0, r1, c1, c0, 0
 	tst	r1, #CR_M @ Check MMU bit enabled
@@ -32,8 +35,13 @@ ENTRY(ll_get_coherency_base)
 
 	/*
 	 * MMU is disabled, use the physical address of the coherency
-	 * base address.
+	 * base address. However, if the coherency fabric isn't mapped
+	 * (i.e its virtual address is zero), it means coherency is
+	 * not enabled, so we return 0.
 	 */
+	ldr	r1, =coherency_base
+	cmp	r1, #0
+	beq	2f
 	adr	r1, 3f
 	ldr	r3, [r1]
 	ldr	r1, [r1, r3]
@@ -85,6 +93,9 @@ ENTRY(ll_add_cpu_to_smp_group)
 	 */
 	mov 	r0, lr
 	bl	ll_get_coherency_base
+	/* Bail out if the coherency is not enabled */
+	cmp	r1, #0
+	reteq	r0
 	bl	ll_get_coherency_cpumask
 	mov 	lr, r0
 	add	r0, r1, #ARMADA_XP_CFB_CFG_REG_OFFSET
@@ -107,6 +118,9 @@ ENTRY(ll_enable_coherency)
 	 */
 	mov r0, lr
 	bl	ll_get_coherency_base
+	/* Bail out if the coherency is not enabled */
+	cmp	r1, #0
+	reteq	r0
 	bl	ll_get_coherency_cpumask
 	mov lr, r0
 	add	r0, r1, #ARMADA_XP_CFB_CTL_REG_OFFSET
@@ -131,6 +145,9 @@ ENTRY(ll_disable_coherency)
 	 */
 	mov 	r0, lr
 	bl	ll_get_coherency_base
+	/* Bail out if the coherency is not enabled */
+	cmp	r1, #0
+	reteq	r0
 	bl	ll_get_coherency_cpumask
 	mov 	lr, r0
 	add	r0, r1, #ARMADA_XP_CFB_CTL_REG_OFFSET
diff --git a/arch/arm/mach-mvebu/common.h b/arch/arm/mach-mvebu/common.h
index 3ccb40c..3e0aca1 100644
--- a/arch/arm/mach-mvebu/common.h
+++ b/arch/arm/mach-mvebu/common.h
@@ -25,4 +25,6 @@ int mvebu_system_controller_get_soc_id(u32 *dev, u32 *rev);
 
 void __iomem *mvebu_get_scu_base(void);
 
+int mvebu_pm_init(void (*board_pm_enter)(void __iomem *sdram_reg, u32 srcmd));
+
 #endif
diff --git a/arch/arm/mach-mvebu/cpu-reset.c b/arch/arm/mach-mvebu/cpu-reset.c
index 60fb537..4a2cadd 100644
--- a/arch/arm/mach-mvebu/cpu-reset.c
+++ b/arch/arm/mach-mvebu/cpu-reset.c
@@ -15,7 +15,6 @@
 #include <linux/of_address.h>
 #include <linux/io.h>
 #include <linux/resource.h>
-#include "armada-370-xp.h"
 
 static void __iomem *cpu_reset_base;
 static size_t cpu_reset_size;
diff --git a/arch/arm/mach-mvebu/headsmp-a9.S b/arch/arm/mach-mvebu/headsmp-a9.S
index be51c99..08d5ed4 100644
--- a/arch/arm/mach-mvebu/headsmp-a9.S
+++ b/arch/arm/mach-mvebu/headsmp-a9.S
@@ -22,5 +22,6 @@
 ENTRY(mvebu_cortex_a9_secondary_startup)
 ARM_BE8(setend	be)
 	bl      v7_invalidate_l1
+	bl	armada_38x_scu_power_up
 	b	secondary_startup
 ENDPROC(mvebu_cortex_a9_secondary_startup)
diff --git a/arch/arm/mach-mvebu/platsmp-a9.c b/arch/arm/mach-mvebu/platsmp-a9.c
index 47a71a9..2ec1a42 100644
--- a/arch/arm/mach-mvebu/platsmp-a9.c
+++ b/arch/arm/mach-mvebu/platsmp-a9.c
@@ -43,21 +43,70 @@ static int __cpuinit mvebu_cortex_a9_boot_secondary(unsigned int cpu,
 	else
 		mvebu_pmsu_set_cpu_boot_addr(hw_cpu, mvebu_cortex_a9_secondary_startup);
 	smp_wmb();
+
+	/*
+	 * Doing this before deasserting the CPUs is needed to wake up CPUs
+	 * in the offline state after using CPU hotplug.
+	 */
+	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+
 	ret = mvebu_cpu_reset_deassert(hw_cpu);
 	if (ret) {
 		pr_err("Could not start the secondary CPU: %d\n", ret);
 		return ret;
 	}
-	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
 
 	return 0;
 }
+/*
+ * When a CPU is brought back online, either through CPU hotplug, or
+ * because of the boot of a kexec'ed kernel, the PMSU configuration
+ * for this CPU might be in the deep idle state, preventing this CPU
+ * from receiving interrupts. Here, we therefore take out the current
+ * CPU from this state, which was entered by armada_38x_cpu_die()
+ * below.
+ */
+static void armada_38x_secondary_init(unsigned int cpu)
+{
+	mvebu_v7_pmsu_idle_exit();
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+static void armada_38x_cpu_die(unsigned int cpu)
+{
+	/*
+	 * CPU hotplug is implemented by putting offline CPUs into the
+	 * deep idle sleep state.
+	 */
+	armada_38x_do_cpu_suspend(true);
+}
+
+/*
+ * We need a dummy function, so that platform_can_cpu_hotplug() knows
+ * we support CPU hotplug. However, the function does not need to do
+ * anything, because CPUs going offline can enter the deep idle state
+ * by themselves, without any help from a still alive CPU.
+ */
+static int armada_38x_cpu_kill(unsigned int cpu)
+{
+	return 1;
+}
+#endif
 
 static struct smp_operations mvebu_cortex_a9_smp_ops __initdata = {
 	.smp_boot_secondary	= mvebu_cortex_a9_boot_secondary,
 };
 
+static struct smp_operations armada_38x_smp_ops __initdata = {
+	.smp_boot_secondary	= mvebu_cortex_a9_boot_secondary,
+	.smp_secondary_init     = armada_38x_secondary_init,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_die		= armada_38x_cpu_die,
+	.cpu_kill               = armada_38x_cpu_kill,
+#endif
+};
+
 CPU_METHOD_OF_DECLARE(mvebu_armada_375_smp, "marvell,armada-375-smp",
 		      &mvebu_cortex_a9_smp_ops);
 CPU_METHOD_OF_DECLARE(mvebu_armada_380_smp, "marvell,armada-380-smp",
-		      &mvebu_cortex_a9_smp_ops);
+		      &armada_38x_smp_ops);
diff --git a/arch/arm/mach-mvebu/platsmp.c b/arch/arm/mach-mvebu/platsmp.c
index 895dc37..58cc8c1 100644
--- a/arch/arm/mach-mvebu/platsmp.c
+++ b/arch/arm/mach-mvebu/platsmp.c
@@ -30,10 +30,12 @@
 #include "pmsu.h"
 #include "coherency.h"
 
+#define ARMADA_XP_MAX_CPUS 4
+
 #define AXP_BOOTROM_BASE 0xfff00000
 #define AXP_BOOTROM_SIZE 0x100000
 
-static struct clk *__init get_cpu_clk(int cpu)
+static struct clk *get_cpu_clk(int cpu)
 {
 	struct clk *cpu_clk;
 	struct device_node *np = of_get_cpu_node(cpu, NULL);
@@ -46,29 +48,28 @@ static struct clk *__init get_cpu_clk(int cpu)
 	return cpu_clk;
 }
 
-static void __init set_secondary_cpus_clock(void)
+static void set_secondary_cpu_clock(unsigned int cpu)
 {
-	int thiscpu, cpu;
+	int thiscpu;
 	unsigned long rate;
 	struct clk *cpu_clk;
 
-	thiscpu = smp_processor_id();
+	thiscpu = get_cpu();
+
 	cpu_clk = get_cpu_clk(thiscpu);
 	if (!cpu_clk)
-		return;
+		goto out;
 	clk_prepare_enable(cpu_clk);
 	rate = clk_get_rate(cpu_clk);
 
-	/* set all the other CPU clk to the same rate than the boot CPU */
-	for_each_possible_cpu(cpu) {
-		if (cpu == thiscpu)
-			continue;
-		cpu_clk = get_cpu_clk(cpu);
-		if (!cpu_clk)
-			return;
-		clk_set_rate(cpu_clk, rate);
-		clk_prepare_enable(cpu_clk);
-	}
+	cpu_clk = get_cpu_clk(cpu);
+	if (!cpu_clk)
+		goto out;
+	clk_set_rate(cpu_clk, rate);
+	clk_prepare_enable(cpu_clk);
+
+out:
+	put_cpu();
 }
 
 static int armada_xp_boot_secondary(unsigned int cpu, struct task_struct *idle)
@@ -78,6 +79,7 @@ static int armada_xp_boot_secondary(unsigned int cpu, struct task_struct *idle)
 	pr_info("Booting CPU %d\n", cpu);
 
 	hw_cpu = cpu_logical_map(cpu);
+	set_secondary_cpu_clock(hw_cpu);
 	mvebu_pmsu_set_cpu_boot_addr(hw_cpu, armada_xp_secondary_startup);
 
 	/*
@@ -126,7 +128,6 @@ static void __init armada_xp_smp_prepare_cpus(unsigned int max_cpus)
 	struct resource res;
 	int err;
 
-	set_secondary_cpus_clock();
 	flush_cache_all();
 	set_cpu_coherent();
 
diff --git a/arch/arm/mach-mvebu/pm-board.c b/arch/arm/mach-mvebu/pm-board.c
new file mode 100644
index 0000000..6dfd4ab
--- /dev/null
+++ b/arch/arm/mach-mvebu/pm-board.c
@@ -0,0 +1,141 @@
+/*
+ * Board-level suspend/resume support.
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_gpio.h>
+#include <linux/slab.h>
+#include "common.h"
+
+#define ARMADA_XP_GP_PIC_NR_GPIOS 3
+
+static void __iomem *gpio_ctrl;
+static int pic_gpios[ARMADA_XP_GP_PIC_NR_GPIOS];
+static int pic_raw_gpios[ARMADA_XP_GP_PIC_NR_GPIOS];
+
+static void mvebu_armada_xp_gp_pm_enter(void __iomem *sdram_reg, u32 srcmd)
+{
+	u32 reg, ackcmd;
+	int i;
+
+	/* Put 001 as value on the GPIOs */
+	reg = readl(gpio_ctrl);
+	for (i = 0; i < ARMADA_XP_GP_PIC_NR_GPIOS; i++)
+		reg &= ~BIT(pic_raw_gpios[i]);
+	reg |= BIT(pic_raw_gpios[0]);
+	writel(reg, gpio_ctrl);
+
+	/* Prepare writing 111 to the GPIOs */
+	ackcmd = readl(gpio_ctrl);
+	for (i = 0; i < ARMADA_XP_GP_PIC_NR_GPIOS; i++)
+		ackcmd |= BIT(pic_raw_gpios[i]);
+
+	/*
+	 * Wait a while, the PIC needs quite a bit of time between the
+	 * two GPIO commands.
+	 */
+	mdelay(3000);
+
+	asm volatile (
+		/* Align to a cache line */
+		".balign 32\n\t"
+
+		/* Enter self refresh */
+		"str %[srcmd], [%[sdram_reg]]\n\t"
+
+		/*
+		 * Wait 100 cycles for DDR to enter self refresh, by
+		 * doing 50 times two instructions.
+		 */
+		"mov r1, #50\n\t"
+		"1: subs r1, r1, #1\n\t"
+		"bne 1b\n\t"
+
+		/* Issue the command ACK */
+		"str %[ackcmd], [%[gpio_ctrl]]\n\t"
+
+		/* Trap the processor */
+		"b .\n\t"
+		: : [srcmd] "r" (srcmd), [sdram_reg] "r" (sdram_reg),
+		  [ackcmd] "r" (ackcmd), [gpio_ctrl] "r" (gpio_ctrl) : "r1");
+}
+
+static int mvebu_armada_xp_gp_pm_init(void)
+{
+	struct device_node *np;
+	struct device_node *gpio_ctrl_np;
+	int ret = 0, i;
+
+	if (!of_machine_is_compatible("marvell,axp-gp"))
+		return -ENODEV;
+
+	np = of_find_node_by_name(NULL, "pm_pic");
+	if (!np)
+		return -ENODEV;
+
+	for (i = 0; i < ARMADA_XP_GP_PIC_NR_GPIOS; i++) {
+		char *name;
+		struct of_phandle_args args;
+
+		pic_gpios[i] = of_get_named_gpio(np, "ctrl-gpios", i);
+		if (pic_gpios[i] < 0) {
+			ret = -ENODEV;
+			goto out;
+		}
+
+		name = kasprintf(GFP_KERNEL, "pic-pin%d", i);
+		if (!name) {
+			ret = -ENOMEM;
+			goto out;
+		}
+
+		ret = gpio_request(pic_gpios[i], name);
+		if (ret < 0) {
+			kfree(name);
+			goto out;
+		}
+
+		ret = gpio_direction_output(pic_gpios[i], 0);
+		if (ret < 0) {
+			gpio_free(pic_gpios[i]);
+			kfree(name);
+			goto out;
+		}
+
+		ret = of_parse_phandle_with_fixed_args(np, "ctrl-gpios", 2,
+						       i, &args);
+		if (ret < 0) {
+			gpio_free(pic_gpios[i]);
+			kfree(name);
+			goto out;
+		}
+
+		gpio_ctrl_np = args.np;
+		pic_raw_gpios[i] = args.args[0];
+	}
+
+	gpio_ctrl = of_iomap(gpio_ctrl_np, 0);
+	if (!gpio_ctrl)
+		return -ENOMEM;
+
+	mvebu_pm_init(mvebu_armada_xp_gp_pm_enter);
+
+out:
+	of_node_put(np);
+	return ret;
+}
+
+late_initcall(mvebu_armada_xp_gp_pm_init);
diff --git a/arch/arm/mach-mvebu/pm.c b/arch/arm/mach-mvebu/pm.c
new file mode 100644
index 0000000..6573a8f
--- /dev/null
+++ b/arch/arm/mach-mvebu/pm.c
@@ -0,0 +1,218 @@
+/*
+ * Suspend/resume support. Currently supporting Armada XP only.
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/cpu_pm.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mbus.h>
+#include <linux/of_address.h>
+#include <linux/suspend.h>
+#include <asm/cacheflush.h>
+#include <asm/outercache.h>
+#include <asm/suspend.h>
+
+#include "coherency.h"
+#include "pmsu.h"
+
+#define SDRAM_CONFIG_OFFS                  0x0
+#define  SDRAM_CONFIG_SR_MODE_BIT          BIT(24)
+#define SDRAM_OPERATION_OFFS               0x18
+#define  SDRAM_OPERATION_SELF_REFRESH      0x7
+#define SDRAM_DLB_EVICTION_OFFS            0x30c
+#define  SDRAM_DLB_EVICTION_THRESHOLD_MASK 0xff
+
+static void (*mvebu_board_pm_enter)(void __iomem *sdram_reg, u32 srcmd);
+static void __iomem *sdram_ctrl;
+
+static int mvebu_pm_powerdown(unsigned long data)
+{
+	u32 reg, srcmd;
+
+	flush_cache_all();
+	outer_flush_all();
+
+	/*
+	 * Issue a Data Synchronization Barrier instruction to ensure
+	 * that all state saving has been completed.
+	 */
+	dsb();
+
+	/* Flush the DLB and wait ~7 usec */
+	reg = readl(sdram_ctrl + SDRAM_DLB_EVICTION_OFFS);
+	reg &= ~SDRAM_DLB_EVICTION_THRESHOLD_MASK;
+	writel(reg, sdram_ctrl + SDRAM_DLB_EVICTION_OFFS);
+
+	udelay(7);
+
+	/* Set DRAM in battery backup mode */
+	reg = readl(sdram_ctrl + SDRAM_CONFIG_OFFS);
+	reg &= ~SDRAM_CONFIG_SR_MODE_BIT;
+	writel(reg, sdram_ctrl + SDRAM_CONFIG_OFFS);
+
+	/* Prepare to go to self-refresh */
+
+	srcmd = readl(sdram_ctrl + SDRAM_OPERATION_OFFS);
+	srcmd &= ~0x1F;
+	srcmd |= SDRAM_OPERATION_SELF_REFRESH;
+
+	mvebu_board_pm_enter(sdram_ctrl + SDRAM_OPERATION_OFFS, srcmd);
+
+	return 0;
+}
+
+#define BOOT_INFO_ADDR      0x3000
+#define BOOT_MAGIC_WORD	    0xdeadb002
+#define BOOT_MAGIC_LIST_END 0xffffffff
+
+/*
+ * Those registers are accessed before switching the internal register
+ * base, which is why we hardcode the 0xd0000000 base address, the one
+ * used by the SoC out of reset.
+ */
+#define MBUS_WINDOW_12_CTRL       0xd00200b0
+#define MBUS_INTERNAL_REG_ADDRESS 0xd0020080
+
+#define SDRAM_WIN_BASE_REG(x)	(0x20180 + (0x8*x))
+#define SDRAM_WIN_CTRL_REG(x)	(0x20184 + (0x8*x))
+
+static phys_addr_t mvebu_internal_reg_base(void)
+{
+	struct device_node *np;
+	__be32 in_addr[2];
+
+	np = of_find_node_by_name(NULL, "internal-regs");
+	BUG_ON(!np);
+
+	/*
+	 * Ask the DT what is the internal register address on this
+	 * platform. In the mvebu-mbus DT binding, 0xf0010000
+	 * corresponds to the internal register window.
+	 */
+	in_addr[0] = cpu_to_be32(0xf0010000);
+	in_addr[1] = 0x0;
+
+	return of_translate_address(np, in_addr);
+}
+
+static void mvebu_pm_store_bootinfo(void)
+{
+	u32 *store_addr;
+	phys_addr_t resume_pc;
+
+	store_addr = phys_to_virt(BOOT_INFO_ADDR);
+	resume_pc = virt_to_phys(armada_370_xp_cpu_resume);
+
+	/*
+	 * The bootloader expects the first two words to be a magic
+	 * value (BOOT_MAGIC_WORD), followed by the address of the
+	 * resume code to jump to. Then, it expects a sequence of
+	 * (address, value) pairs, which can be used to restore the
+	 * value of certain registers. This sequence must end with the
+	 * BOOT_MAGIC_LIST_END magic value.
+	 */
+
+	writel(BOOT_MAGIC_WORD, store_addr++);
+	writel(resume_pc, store_addr++);
+
+	/*
+	 * Some platforms remap their internal register base address
+	 * to 0xf1000000. However, out of reset, window 12 starts at
+	 * 0xf0000000 and ends at 0xf7ffffff, which would overlap with
+	 * the internal registers. Therefore, disable window 12.
+	 */
+	writel(MBUS_WINDOW_12_CTRL, store_addr++);
+	writel(0x0, store_addr++);
+
+	/*
+	 * Set the internal register base address to the value
+	 * expected by Linux, as read from the Device Tree.
+	 */
+	writel(MBUS_INTERNAL_REG_ADDRESS, store_addr++);
+	writel(mvebu_internal_reg_base(), store_addr++);
+
+	/*
+	 * Ask the mvebu-mbus driver to store the SDRAM window
+	 * configuration, which has to be restored by the bootloader
+	 * before re-entering the kernel on resume.
+	 */
+	store_addr += mvebu_mbus_save_cpu_target(store_addr);
+
+	writel(BOOT_MAGIC_LIST_END, store_addr);
+}
+
+static int mvebu_pm_enter(suspend_state_t state)
+{
+	if (state != PM_SUSPEND_MEM)
+		return -EINVAL;
+
+	cpu_pm_enter();
+
+	mvebu_pm_store_bootinfo();
+	cpu_suspend(0, mvebu_pm_powerdown);
+
+	outer_resume();
+
+	mvebu_v7_pmsu_idle_exit();
+
+	set_cpu_coherent();
+
+	cpu_pm_exit();
+
+	return 0;
+}
+
+static const struct platform_suspend_ops mvebu_pm_ops = {
+	.enter = mvebu_pm_enter,
+	.valid = suspend_valid_only_mem,
+};
+
+int mvebu_pm_init(void (*board_pm_enter)(void __iomem *sdram_reg, u32 srcmd))
+{
+	struct device_node *np;
+	struct resource res;
+
+	if (!of_machine_is_compatible("marvell,armadaxp"))
+		return -ENODEV;
+
+	np = of_find_compatible_node(NULL, NULL,
+				     "marvell,armada-xp-sdram-controller");
+	if (!np)
+		return -ENODEV;
+
+	if (of_address_to_resource(np, 0, &res)) {
+		of_node_put(np);
+		return -ENODEV;
+	}
+
+	if (!request_mem_region(res.start, resource_size(&res),
+				np->full_name)) {
+		of_node_put(np);
+		return -EBUSY;
+	}
+
+	sdram_ctrl = ioremap(res.start, resource_size(&res));
+	if (!sdram_ctrl) {
+		release_mem_region(res.start, resource_size(&res));
+		of_node_put(np);
+		return -ENOMEM;
+	}
+
+	of_node_put(np);
+
+	mvebu_board_pm_enter = board_pm_enter;
+
+	suspend_set_ops(&mvebu_pm_ops);
+
+	return 0;
+}
diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c
index bbd8664..d8ab605 100644
--- a/arch/arm/mach-mvebu/pmsu.c
+++ b/arch/arm/mach-mvebu/pmsu.c
@@ -20,6 +20,7 @@
 
 #include <linux/clk.h>
 #include <linux/cpu_pm.h>
+#include <linux/cpufreq-dt.h>
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/io.h>
@@ -39,7 +40,6 @@
 #include <asm/suspend.h>
 #include <asm/tlbflush.h>
 #include "common.h"
-#include "armada-370-xp.h"
 
 
 #define PMSU_BASE_OFFSET    0x100
@@ -312,7 +312,7 @@ static int armada_370_xp_cpu_suspend(unsigned long deepidle)
 	return cpu_suspend(deepidle, armada_370_xp_pmsu_idle_enter);
 }
 
-static int armada_38x_do_cpu_suspend(unsigned long deepidle)
+int armada_38x_do_cpu_suspend(unsigned long deepidle)
 {
 	unsigned long flags = 0;
 
@@ -572,6 +572,10 @@ int mvebu_pmsu_dfs_request(int cpu)
 	return 0;
 }
 
+struct cpufreq_dt_platform_data cpufreq_dt_pd = {
+	.independent_clocks = true,
+};
+
 static int __init armada_xp_pmsu_cpufreq_init(void)
 {
 	struct device_node *np;
@@ -644,7 +648,8 @@ static int __init armada_xp_pmsu_cpufreq_init(void)
 		}
 	}
 
-	platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
+	platform_device_register_data(NULL, "cpufreq-dt", -1,
+				      &cpufreq_dt_pd, sizeof(cpufreq_dt_pd));
 	return 0;
 }
 
diff --git a/arch/arm/mach-mvebu/pmsu.h b/arch/arm/mach-mvebu/pmsu.h
index 6b58c1f..ea79269 100644
--- a/arch/arm/mach-mvebu/pmsu.h
+++ b/arch/arm/mach-mvebu/pmsu.h
@@ -17,5 +17,8 @@ int mvebu_setup_boot_addr_wa(unsigned int crypto_eng_target,
                              phys_addr_t resume_addr_reg);
 
 void mvebu_v7_pmsu_idle_exit(void);
+void armada_370_xp_cpu_resume(void);
 
+int armada_370_xp_pmsu_idle_enter(unsigned long deepidle);
+int armada_38x_do_cpu_suspend(unsigned long deepidle);
 #endif	/* __MACH_370_XP_PMSU_H */
diff --git a/arch/arm/mach-mvebu/pmsu_ll.S b/arch/arm/mach-mvebu/pmsu_ll.S
index a945756..8865122 100644
--- a/arch/arm/mach-mvebu/pmsu_ll.S
+++ b/arch/arm/mach-mvebu/pmsu_ll.S
@@ -12,12 +12,32 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 
+
+ENTRY(armada_38x_scu_power_up)
+	mrc     p15, 4, r1, c15, c0	@ get SCU base address
+	orr	r1, r1, #0x8		@ SCU CPU Power Status Register
+	mrc	15, 0, r0, cr0, cr0, 5	@ get the CPU ID
+	and	r0, r0, #15
+	add	r1, r1, r0
+	mov	r0, #0x0
+	strb	r0, [r1]		@ switch SCU power state to Normal mode
+	ret	lr
+ENDPROC(armada_38x_scu_power_up)
+
 /*
  * This is the entry point through which CPUs exiting cpuidle deep
  * idle state are going.
  */
 ENTRY(armada_370_xp_cpu_resume)
 ARM_BE8(setend	be )			@ go BE8 if entered LE
+	/*
+	 * Disable the MMU that might have been enabled in BootROM if
+	 * this code is used in the resume path of a suspend/resume
+	 * cycle.
+	 */
+	mrc	p15, 0, r1, c1, c0, 0
+	bic	r1, #1
+	mcr	p15, 0, r1, c1, c0, 0
 	bl	ll_add_cpu_to_smp_group
 	bl	ll_enable_coherency
 	b	cpu_resume
@@ -27,13 +47,7 @@ ENTRY(armada_38x_cpu_resume)
 	/* do we need it for Armada 38x*/
 ARM_BE8(setend	be )			@ go BE8 if entered LE
 	bl	v7_invalidate_l1
-	mrc     p15, 4, r1, c15, c0	@ get SCU base address
-	orr	r1, r1, #0x8		@ SCU CPU Power Status Register
-	mrc	15, 0, r0, cr0, cr0, 5	@ get the CPU ID
-	and	r0, r0, #15
-	add	r1, r1, r0
-	mov	r0, #0x0
-	strb	r0, [r1]		@ switch SCU power state to Normal mode
+	bl	armada_38x_scu_power_up
 	b	cpu_resume
 ENDPROC(armada_38x_cpu_resume)
 
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index d9e9412..3b653b3 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -113,7 +113,7 @@ obj-y					+= prm_common.o cm_common.o
 obj-$(CONFIG_ARCH_OMAP2)		+= prm2xxx_3xxx.o prm2xxx.o cm2xxx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= prm2xxx_3xxx.o prm3xxx.o cm3xxx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= vc3xxx_data.o vp3xxx_data.o
-omap-prcm-4-5-common			=  cminst44xx.o cm44xx.o prm44xx.o \
+omap-prcm-4-5-common			=  cminst44xx.o prm44xx.o \
 					   prcm_mpu44xx.o prminst44xx.o \
 					   vc44xx_data.o vp44xx_data.o
 obj-$(CONFIG_ARCH_OMAP4)		+= $(omap-prcm-4-5-common)
diff --git a/arch/arm/mach-omap2/am33xx-restart.c b/arch/arm/mach-omap2/am33xx-restart.c
index c88d8df7..5bace6a 100644
--- a/arch/arm/mach-omap2/am33xx-restart.c
+++ b/arch/arm/mach-omap2/am33xx-restart.c
@@ -9,8 +9,7 @@
 #include <linux/reboot.h>
 
 #include "common.h"
-#include "prm-regbits-33xx.h"
-#include "prm33xx.h"
+#include "prm.h"
 
 /**
  * am3xx_restart - trigger a software restart of the SoC
@@ -24,12 +23,5 @@ void am33xx_restart(enum reboot_mode mode, const char *cmd)
 {
 	/* TODO: Handle mode and cmd if necessary */
 
-	am33xx_prm_rmw_reg_bits(AM33XX_RST_GLOBAL_WARM_SW_MASK,
-				AM33XX_RST_GLOBAL_WARM_SW_MASK,
-				AM33XX_PRM_DEVICE_MOD,
-				AM33XX_PRM_RSTCTRL_OFFSET);
-
-	/* OCP barrier */
-	(void)am33xx_prm_read_reg(AM33XX_PRM_DEVICE_MOD,
-				  AM33XX_PRM_RSTCTRL_OFFSET);
+	omap_prm_reset_system();
 }
diff --git a/arch/arm/mach-omap2/cclock3xxx_data.c b/arch/arm/mach-omap2/cclock3xxx_data.c
index eb8c75e..5c5ebb4 100644
--- a/arch/arm/mach-omap2/cclock3xxx_data.c
+++ b/arch/arm/mach-omap2/cclock3xxx_data.c
@@ -257,6 +257,9 @@ static const struct clk_ops dpll1_ck_ops = {
 	.get_parent	= &omap2_init_dpll_parent,
 	.recalc_rate	= &omap3_dpll_recalc,
 	.set_rate	= &omap3_noncore_dpll_set_rate,
+	.set_parent	= &omap3_noncore_dpll_set_parent,
+	.set_rate_and_parent	= &omap3_noncore_dpll_set_rate_and_parent,
+	.determine_rate	= &omap3_noncore_dpll_determine_rate,
 	.round_rate	= &omap2_dpll_round_rate,
 };
 
@@ -367,6 +370,9 @@ static const struct clk_ops dpll4_ck_ops = {
 	.get_parent	= &omap2_init_dpll_parent,
 	.recalc_rate	= &omap3_dpll_recalc,
 	.set_rate	= &omap3_dpll4_set_rate,
+	.set_parent	= &omap3_noncore_dpll_set_parent,
+	.set_rate_and_parent	= &omap3_dpll4_set_rate_and_parent,
+	.determine_rate	= &omap3_noncore_dpll_determine_rate,
 	.round_rate	= &omap2_dpll_round_rate,
 };
 
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 500530d..6ad5b4d 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -171,7 +171,8 @@ static void _omap2_module_wait_ready(struct clk_hw_omap *clk)
 		_wait_idlest_generic(clk, idlest_reg, (1 << idlest_bit),
 				     idlest_val, __clk_get_name(clk->hw.clk));
 	} else {
-		cm_wait_module_ready(prcm_mod, idlest_reg_id, idlest_bit);
+		omap_cm_wait_module_ready(0, prcm_mod, idlest_reg_id,
+					  idlest_bit);
 	};
 }
 
@@ -771,4 +772,8 @@ void __init ti_clk_init_features(void)
 		ti_clk_features.cm_idlest_val = OMAP24XX_CM_IDLEST_VAL;
 	else if (cpu_is_omap34xx())
 		ti_clk_features.cm_idlest_val = OMAP34XX_CM_IDLEST_VAL;
+
+	/* On OMAP3430 ES1.0, DPLL4 can't be re-programmed */
+	if (omap_rev() == OMAP3430_REV_ES1_0)
+		ti_clk_features.flags |= TI_CLK_DPLL4_DENY_REPROGRAM;
 }
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 4592a27..641337c 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -234,6 +234,7 @@ struct ti_clk_features {
 };
 
 #define TI_CLK_DPLL_HAS_FREQSEL		(1 << 0)
+#define TI_CLK_DPLL4_DENY_REPROGRAM	(1 << 1)
 
 extern struct ti_clk_features ti_clk_features;
 
diff --git a/arch/arm/mach-omap2/clock3xxx.c b/arch/arm/mach-omap2/clock3xxx.c
index 0b02b41..a9e86db 100644
--- a/arch/arm/mach-omap2/clock3xxx.c
+++ b/arch/arm/mach-omap2/clock3xxx.c
@@ -38,6 +38,18 @@
 
 /* needed by omap3_core_dpll_m2_set_rate() */
 struct clk *sdrc_ick_p, *arm_fck_p;
+
+/**
+ * omap3_dpll4_set_rate - set rate for omap3 per-dpll
+ * @hw: clock to change
+ * @rate: target rate for clock
+ * @parent_rate: rate of the parent clock
+ *
+ * Check if the current SoC supports the per-dpll reprogram operation
+ * or not, and then do the rate change if supported. Returns -EINVAL
+ * if not supported, 0 for success, and potential error codes from the
+ * clock rate change.
+ */
 int omap3_dpll4_set_rate(struct clk_hw *hw, unsigned long rate,
 				unsigned long parent_rate)
 {
@@ -46,7 +58,7 @@ int omap3_dpll4_set_rate(struct clk_hw *hw, unsigned long rate,
 	 * on 3430ES1 prevents us from changing DPLL multipliers or dividers
 	 * on DPLL4.
 	 */
-	if (omap_rev() == OMAP3430_REV_ES1_0) {
+	if (ti_clk_features.flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
 		pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");
 		return -EINVAL;
 	}
@@ -54,6 +66,30 @@ int omap3_dpll4_set_rate(struct clk_hw *hw, unsigned long rate,
 	return omap3_noncore_dpll_set_rate(hw, rate, parent_rate);
 }
 
+/**
+ * omap3_dpll4_set_rate_and_parent - set rate and parent for omap3 per-dpll
+ * @hw: clock to change
+ * @rate: target rate for clock
+ * @parent_rate: rate of the parent clock
+ * @index: parent index, 0 - reference clock, 1 - bypass clock
+ *
+ * Check if the current SoC support the per-dpll reprogram operation
+ * or not, and then do the rate + parent change if supported. Returns
+ * -EINVAL if not supported, 0 for success, and potential error codes
+ * from the clock rate change.
+ */
+int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate,
+				    unsigned long parent_rate, u8 index)
+{
+	if (ti_clk_features.flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
+		pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");
+		return -EINVAL;
+	}
+
+	return omap3_noncore_dpll_set_rate_and_parent(hw, rate, parent_rate,
+						      index);
+}
+
 void __init omap3_clk_lock_dpll5(void)
 {
 	struct clk *dpll5_clk;
diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h
index 93473f9..6222e87 100644
--- a/arch/arm/mach-omap2/cm.h
+++ b/arch/arm/mach-omap2/cm.h
@@ -45,17 +45,29 @@ extern void omap2_set_globals_cm(void __iomem *cm, void __iomem *cm2);
  * struct cm_ll_data - fn ptrs to per-SoC CM function implementations
  * @split_idlest_reg: ptr to the SoC CM-specific split_idlest_reg impl
  * @wait_module_ready: ptr to the SoC CM-specific wait_module_ready impl
+ * @wait_module_idle: ptr to the SoC CM-specific wait_module_idle impl
+ * @module_enable: ptr to the SoC CM-specific module_enable impl
+ * @module_disable: ptr to the SoC CM-specific module_disable impl
  */
 struct cm_ll_data {
 	int (*split_idlest_reg)(void __iomem *idlest_reg, s16 *prcm_inst,
 				u8 *idlest_reg_id);
-	int (*wait_module_ready)(s16 prcm_mod, u8 idlest_id, u8 idlest_shift);
+	int (*wait_module_ready)(u8 part, s16 prcm_mod, u16 idlest_reg,
+				 u8 idlest_shift);
+	int (*wait_module_idle)(u8 part, s16 prcm_mod, u16 idlest_reg,
+				u8 idlest_shift);
+	void (*module_enable)(u8 mode, u8 part, u16 inst, u16 clkctrl_offs);
+	void (*module_disable)(u8 part, u16 inst, u16 clkctrl_offs);
 };
 
 extern int cm_split_idlest_reg(void __iomem *idlest_reg, s16 *prcm_inst,
 			       u8 *idlest_reg_id);
-extern int cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift);
-
+int omap_cm_wait_module_ready(u8 part, s16 prcm_mod, u16 idlest_reg,
+			      u8 idlest_shift);
+int omap_cm_wait_module_idle(u8 part, s16 prcm_mod, u16 idlest_reg,
+			     u8 idlest_shift);
+int omap_cm_module_enable(u8 mode, u8 part, u16 inst, u16 clkctrl_offs);
+int omap_cm_module_disable(u8 part, u16 inst, u16 clkctrl_offs);
 extern int cm_register(struct cm_ll_data *cld);
 extern int cm_unregister(struct cm_ll_data *cld);
 
diff --git a/arch/arm/mach-omap2/cm1_44xx.h b/arch/arm/mach-omap2/cm1_44xx.h
index 5ae8fe3..a594992 100644
--- a/arch/arm/mach-omap2/cm1_44xx.h
+++ b/arch/arm/mach-omap2/cm1_44xx.h
@@ -25,8 +25,6 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_CM1_44XX_H
 #define __ARCH_ARM_MACH_OMAP2_CM1_44XX_H
 
-#include "cm_44xx_54xx.h"
-
 /* CM1 base address */
 #define OMAP4430_CM1_BASE		0x4a004000
 
diff --git a/arch/arm/mach-omap2/cm1_54xx.h b/arch/arm/mach-omap2/cm1_54xx.h
index 90b3348..fd245df 100644
--- a/arch/arm/mach-omap2/cm1_54xx.h
+++ b/arch/arm/mach-omap2/cm1_54xx.h
@@ -22,8 +22,6 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_CM1_54XX_H
 #define __ARCH_ARM_MACH_OMAP2_CM1_54XX_H
 
-#include "cm_44xx_54xx.h"
-
 /* CM1 base address */
 #define OMAP54XX_CM_CORE_AON_BASE		0x4a004000
 
diff --git a/arch/arm/mach-omap2/cm1_7xx.h b/arch/arm/mach-omap2/cm1_7xx.h
index ca6fa1f..2f1c09e 100644
--- a/arch/arm/mach-omap2/cm1_7xx.h
+++ b/arch/arm/mach-omap2/cm1_7xx.h
@@ -23,8 +23,6 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_CM1_7XX_H
 #define __ARCH_ARM_MACH_OMAP2_CM1_7XX_H
 
-#include "cm_44xx_54xx.h"
-
 /* CM1 base address */
 #define DRA7XX_CM_CORE_AON_BASE		0x4a005000
 
diff --git a/arch/arm/mach-omap2/cm2_44xx.h b/arch/arm/mach-omap2/cm2_44xx.h
index ee5136d..7521abf 100644
--- a/arch/arm/mach-omap2/cm2_44xx.h
+++ b/arch/arm/mach-omap2/cm2_44xx.h
@@ -25,8 +25,6 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_CM2_44XX_H
 #define __ARCH_ARM_MACH_OMAP2_CM2_44XX_H
 
-#include "cm_44xx_54xx.h"
-
 /* CM2 base address */
 #define OMAP4430_CM2_BASE		0x4a008000
 
diff --git a/arch/arm/mach-omap2/cm2_54xx.h b/arch/arm/mach-omap2/cm2_54xx.h
index 2683231..ff4040c 100644
--- a/arch/arm/mach-omap2/cm2_54xx.h
+++ b/arch/arm/mach-omap2/cm2_54xx.h
@@ -21,8 +21,6 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_CM2_54XX_H
 #define __ARCH_ARM_MACH_OMAP2_CM2_54XX_H
 
-#include "cm_44xx_54xx.h"
-
 /* CM2 base address */
 #define OMAP54XX_CM_CORE_BASE		0x4a008000
 
diff --git a/arch/arm/mach-omap2/cm2_7xx.h b/arch/arm/mach-omap2/cm2_7xx.h
index e966e3a..ce63fdb 100644
--- a/arch/arm/mach-omap2/cm2_7xx.h
+++ b/arch/arm/mach-omap2/cm2_7xx.h
@@ -22,8 +22,6 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_CM2_7XX_H
 #define __ARCH_ARM_MACH_OMAP2_CM2_7XX_H
 
-#include "cm_44xx_54xx.h"
-
 /* CM2 base address */
 #define DRA7XX_CM_CORE_BASE		0x4a008000
 
diff --git a/arch/arm/mach-omap2/cm2xxx.c b/arch/arm/mach-omap2/cm2xxx.c
index 8be6ea5..a96d901 100644
--- a/arch/arm/mach-omap2/cm2xxx.c
+++ b/arch/arm/mach-omap2/cm2xxx.c
@@ -53,7 +53,7 @@ static void _write_clktrctrl(u8 c, s16 module, u32 mask)
 	omap2_cm_write_mod_reg(v, module, OMAP2_CM_CLKSTCTRL);
 }
 
-bool omap2xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask)
+static bool omap2xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask)
 {
 	u32 v;
 
@@ -64,12 +64,12 @@ bool omap2xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask)
 	return (v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO) ? 1 : 0;
 }
 
-void omap2xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask)
+static void omap2xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask)
 {
 	_write_clktrctrl(OMAP24XX_CLKSTCTRL_ENABLE_AUTO, module, mask);
 }
 
-void omap2xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask)
+static void omap2xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask)
 {
 	_write_clktrctrl(OMAP24XX_CLKSTCTRL_DISABLE_AUTO, module, mask);
 }
@@ -150,7 +150,7 @@ static int _omap2xxx_apll_enable(u8 enable_bit, u8 status_bit)
 	v |= m;
 	omap2_cm_write_mod_reg(v, PLL_MOD, CM_CLKEN);
 
-	omap2xxx_cm_wait_module_ready(PLL_MOD, 1, status_bit);
+	omap2xxx_cm_wait_module_ready(0, PLL_MOD, 1, status_bit);
 
 	/*
 	 * REVISIT: Should we return an error code if
@@ -204,8 +204,9 @@ void omap2xxx_cm_apll96_disable(void)
  * XXX This function is only needed until absolute register addresses are
  * removed from the OMAP struct clk records.
  */
-int omap2xxx_cm_split_idlest_reg(void __iomem *idlest_reg, s16 *prcm_inst,
-				 u8 *idlest_reg_id)
+static int omap2xxx_cm_split_idlest_reg(void __iomem *idlest_reg,
+					s16 *prcm_inst,
+					u8 *idlest_reg_id)
 {
 	unsigned long offs;
 	u8 idlest_offs;
@@ -238,6 +239,7 @@ int omap2xxx_cm_split_idlest_reg(void __iomem *idlest_reg, s16 *prcm_inst,
 
 /**
  * omap2xxx_cm_wait_module_ready - wait for a module to leave idle or standby
+ * @part: PRCM partition, ignored for OMAP2
  * @prcm_mod: PRCM module offset
  * @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3)
  * @idlest_shift: shift of the bit in the CM_IDLEST* register to check
@@ -246,7 +248,8 @@ int omap2xxx_cm_split_idlest_reg(void __iomem *idlest_reg, s16 *prcm_inst,
  * (@prcm_mod, @idlest_id, @idlest_shift) is clocked.  Return 0 upon
  * success or -EBUSY if the module doesn't enable in time.
  */
-int omap2xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift)
+int omap2xxx_cm_wait_module_ready(u8 part, s16 prcm_mod, u16 idlest_id,
+				  u8 idlest_shift)
 {
 	int ena = 0, i = 0;
 	u8 cm_idlest_reg;
diff --git a/arch/arm/mach-omap2/cm2xxx.h b/arch/arm/mach-omap2/cm2xxx.h
index 891d81c..c89502b 100644
--- a/arch/arm/mach-omap2/cm2xxx.h
+++ b/arch/arm/mach-omap2/cm2xxx.h
@@ -46,9 +46,6 @@
 
 #ifndef __ASSEMBLER__
 
-extern void omap2xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask);
-extern void omap2xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask);
-
 extern void omap2xxx_cm_set_dpll_disable_autoidle(void);
 extern void omap2xxx_cm_set_dpll_auto_low_power_stop(void);
 
@@ -57,11 +54,8 @@ extern void omap2xxx_cm_set_apll54_auto_low_power_stop(void);
 extern void omap2xxx_cm_set_apll96_disable_autoidle(void);
 extern void omap2xxx_cm_set_apll96_auto_low_power_stop(void);
 
-extern bool omap2xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask);
-extern int omap2xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id,
-					 u8 idlest_shift);
-extern int omap2xxx_cm_split_idlest_reg(void __iomem *idlest_reg,
-					s16 *prcm_inst, u8 *idlest_reg_id);
+int omap2xxx_cm_wait_module_ready(u8 part, s16 prcm_mod, u16 idlest_id,
+				  u8 idlest_shift);
 extern int omap2xxx_cm_fclks_active(void);
 extern int omap2xxx_cm_mpu_retention_allowed(void);
 extern u32 omap2xxx_cm_get_core_clk_src(void);
diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c
index b3f99e9..b9ad463 100644
--- a/arch/arm/mach-omap2/cm33xx.c
+++ b/arch/arm/mach-omap2/cm33xx.c
@@ -96,13 +96,12 @@ static inline u32 am33xx_cm_read_reg_bits(u16 inst, s16 idx, u32 mask)
 /**
  * _clkctrl_idlest - read a CM_*_CLKCTRL register; mask & shift IDLEST bitfield
  * @inst: CM instance register offset (*_INST macro)
- * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
  * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
  *
  * Return the IDLEST bitfield of a CM_*_CLKCTRL register, shifted down to
  * bit 0.
  */
-static u32 _clkctrl_idlest(u16 inst, s16 cdoffs, u16 clkctrl_offs)
+static u32 _clkctrl_idlest(u16 inst, u16 clkctrl_offs)
 {
 	u32 v = am33xx_cm_read_reg(inst, clkctrl_offs);
 	v &= AM33XX_IDLEST_MASK;
@@ -113,17 +112,16 @@ static u32 _clkctrl_idlest(u16 inst, s16 cdoffs, u16 clkctrl_offs)
 /**
  * _is_module_ready - can module registers be accessed without causing an abort?
  * @inst: CM instance register offset (*_INST macro)
- * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
  * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
  *
  * Returns true if the module's CM_*_CLKCTRL.IDLEST bitfield is either
  * *FUNCTIONAL or *INTERFACE_IDLE; false otherwise.
  */
-static bool _is_module_ready(u16 inst, s16 cdoffs, u16 clkctrl_offs)
+static bool _is_module_ready(u16 inst, u16 clkctrl_offs)
 {
 	u32 v;
 
-	v = _clkctrl_idlest(inst, cdoffs, clkctrl_offs);
+	v = _clkctrl_idlest(inst, clkctrl_offs);
 
 	return (v == CLKCTRL_IDLEST_FUNCTIONAL ||
 		v == CLKCTRL_IDLEST_INTERFACE_IDLE) ? true : false;
@@ -158,7 +156,7 @@ static void _clktrctrl_write(u8 c, u16 inst, u16 cdoffs)
  * Returns true if the clockdomain referred to by (@inst, @cdoffs)
  * is in hardware-supervised idle mode, or 0 otherwise.
  */
-bool am33xx_cm_is_clkdm_in_hwsup(u16 inst, u16 cdoffs)
+static bool am33xx_cm_is_clkdm_in_hwsup(u16 inst, u16 cdoffs)
 {
 	u32 v;
 
@@ -177,7 +175,7 @@ bool am33xx_cm_is_clkdm_in_hwsup(u16 inst, u16 cdoffs)
  * Put a clockdomain referred to by (@inst, @cdoffs) into
  * hardware-supervised idle mode.  No return value.
  */
-void am33xx_cm_clkdm_enable_hwsup(u16 inst, u16 cdoffs)
+static void am33xx_cm_clkdm_enable_hwsup(u16 inst, u16 cdoffs)
 {
 	_clktrctrl_write(OMAP34XX_CLKSTCTRL_ENABLE_AUTO, inst, cdoffs);
 }
@@ -191,7 +189,7 @@ void am33xx_cm_clkdm_enable_hwsup(u16 inst, u16 cdoffs)
  * software-supervised idle mode, i.e., controlled manually by the
  * Linux OMAP clockdomain code.  No return value.
  */
-void am33xx_cm_clkdm_disable_hwsup(u16 inst, u16 cdoffs)
+static void am33xx_cm_clkdm_disable_hwsup(u16 inst, u16 cdoffs)
 {
 	_clktrctrl_write(OMAP34XX_CLKSTCTRL_DISABLE_AUTO, inst, cdoffs);
 }
@@ -204,7 +202,7 @@ void am33xx_cm_clkdm_disable_hwsup(u16 inst, u16 cdoffs)
  * Put a clockdomain referred to by (@inst, @cdoffs) into idle
  * No return value.
  */
-void am33xx_cm_clkdm_force_sleep(u16 inst, u16 cdoffs)
+static void am33xx_cm_clkdm_force_sleep(u16 inst, u16 cdoffs)
 {
 	_clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_SLEEP, inst, cdoffs);
 }
@@ -217,7 +215,7 @@ void am33xx_cm_clkdm_force_sleep(u16 inst, u16 cdoffs)
  * Take a clockdomain referred to by (@inst, @cdoffs) out of idle,
  * waking it up.  No return value.
  */
-void am33xx_cm_clkdm_force_wakeup(u16 inst, u16 cdoffs)
+static void am33xx_cm_clkdm_force_wakeup(u16 inst, u16 cdoffs)
 {
 	_clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_WAKEUP, inst, cdoffs);
 }
@@ -228,20 +226,22 @@ void am33xx_cm_clkdm_force_wakeup(u16 inst, u16 cdoffs)
 
 /**
  * am33xx_cm_wait_module_ready - wait for a module to be in 'func' state
+ * @part: PRCM partition, ignored for AM33xx
  * @inst: CM instance register offset (*_INST macro)
- * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
  * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
+ * @bit_shift: bit shift for the register, ignored for AM33xx
  *
  * Wait for the module IDLEST to be functional. If the idle state is in any
  * the non functional state (trans, idle or disabled), module and thus the
  * sysconfig cannot be accessed and will probably lead to an "imprecise
  * external abort"
  */
-int am33xx_cm_wait_module_ready(u16 inst, s16 cdoffs, u16 clkctrl_offs)
+static int am33xx_cm_wait_module_ready(u8 part, s16 inst, u16 clkctrl_offs,
+				       u8 bit_shift)
 {
 	int i = 0;
 
-	omap_test_timeout(_is_module_ready(inst, cdoffs, clkctrl_offs),
+	omap_test_timeout(_is_module_ready(inst, clkctrl_offs),
 			  MAX_MODULE_READY_TIME, i);
 
 	return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
@@ -250,22 +250,24 @@ int am33xx_cm_wait_module_ready(u16 inst, s16 cdoffs, u16 clkctrl_offs)
 /**
  * am33xx_cm_wait_module_idle - wait for a module to be in 'disabled'
  * state
+ * @part: CM partition, ignored for AM33xx
  * @inst: CM instance register offset (*_INST macro)
- * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
  * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
+ * @bit_shift: bit shift for the register, ignored for AM33xx
  *
  * Wait for the module IDLEST to be disabled. Some PRCM transition,
  * like reset assertion or parent clock de-activation must wait the
  * module to be fully disabled.
  */
-int am33xx_cm_wait_module_idle(u16 inst, s16 cdoffs, u16 clkctrl_offs)
+static int am33xx_cm_wait_module_idle(u8 part, s16 inst, u16 clkctrl_offs,
+				      u8 bit_shift)
 {
 	int i = 0;
 
 	if (!clkctrl_offs)
 		return 0;
 
-	omap_test_timeout((_clkctrl_idlest(inst, cdoffs, clkctrl_offs) ==
+	omap_test_timeout((_clkctrl_idlest(inst, clkctrl_offs) ==
 				CLKCTRL_IDLEST_DISABLED),
 				MAX_MODULE_READY_TIME, i);
 
@@ -275,13 +277,14 @@ int am33xx_cm_wait_module_idle(u16 inst, s16 cdoffs, u16 clkctrl_offs)
 /**
  * am33xx_cm_module_enable - Enable the modulemode inside CLKCTRL
  * @mode: Module mode (SW or HW)
+ * @part: CM partition, ignored for AM33xx
  * @inst: CM instance register offset (*_INST macro)
- * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
  * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
  *
  * No return value.
  */
-void am33xx_cm_module_enable(u8 mode, u16 inst, s16 cdoffs, u16 clkctrl_offs)
+static void am33xx_cm_module_enable(u8 mode, u8 part, u16 inst,
+				    u16 clkctrl_offs)
 {
 	u32 v;
 
@@ -293,13 +296,13 @@ void am33xx_cm_module_enable(u8 mode, u16 inst, s16 cdoffs, u16 clkctrl_offs)
 
 /**
  * am33xx_cm_module_disable - Disable the module inside CLKCTRL
+ * @part: CM partition, ignored for AM33xx
  * @inst: CM instance register offset (*_INST macro)
- * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
  * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
  *
  * No return value.
  */
-void am33xx_cm_module_disable(u16 inst, s16 cdoffs, u16 clkctrl_offs)
+static void am33xx_cm_module_disable(u8 part, u16 inst, u16 clkctrl_offs)
 {
 	u32 v;
 
@@ -362,3 +365,21 @@ struct clkdm_ops am33xx_clkdm_operations = {
 	.clkdm_clk_enable	= am33xx_clkdm_clk_enable,
 	.clkdm_clk_disable	= am33xx_clkdm_clk_disable,
 };
+
+static struct cm_ll_data am33xx_cm_ll_data = {
+	.wait_module_ready	= &am33xx_cm_wait_module_ready,
+	.wait_module_idle	= &am33xx_cm_wait_module_idle,
+	.module_enable		= &am33xx_cm_module_enable,
+	.module_disable		= &am33xx_cm_module_disable,
+};
+
+int __init am33xx_cm_init(void)
+{
+	return cm_register(&am33xx_cm_ll_data);
+}
+
+static void __exit am33xx_cm_exit(void)
+{
+	cm_unregister(&am33xx_cm_ll_data);
+}
+__exitcall(am33xx_cm_exit);
diff --git a/arch/arm/mach-omap2/cm33xx.h b/arch/arm/mach-omap2/cm33xx.h
index bd24417..046b4b2 100644
--- a/arch/arm/mach-omap2/cm33xx.h
+++ b/arch/arm/mach-omap2/cm33xx.h
@@ -374,41 +374,6 @@
 
 
 #ifndef __ASSEMBLER__
-bool am33xx_cm_is_clkdm_in_hwsup(u16 inst, u16 cdoffs);
-void am33xx_cm_clkdm_enable_hwsup(u16 inst, u16 cdoffs);
-void am33xx_cm_clkdm_disable_hwsup(u16 inst, u16 cdoffs);
-void am33xx_cm_clkdm_force_sleep(u16 inst, u16 cdoffs);
-void am33xx_cm_clkdm_force_wakeup(u16 inst, u16 cdoffs);
-
-#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX)
-extern int am33xx_cm_wait_module_idle(u16 inst, s16 cdoffs,
-					u16 clkctrl_offs);
-extern void am33xx_cm_module_enable(u8 mode, u16 inst, s16 cdoffs,
-					u16 clkctrl_offs);
-extern void am33xx_cm_module_disable(u16 inst, s16 cdoffs,
-					u16 clkctrl_offs);
-extern int am33xx_cm_wait_module_ready(u16 inst, s16 cdoffs,
-					u16 clkctrl_offs);
-#else
-static inline int am33xx_cm_wait_module_idle(u16 inst, s16 cdoffs,
-					u16 clkctrl_offs)
-{
-	return 0;
-}
-static inline void am33xx_cm_module_enable(u8 mode, u16 inst, s16 cdoffs,
-					u16 clkctrl_offs)
-{
-}
-static inline void am33xx_cm_module_disable(u16 inst, s16 cdoffs,
-					u16 clkctrl_offs)
-{
-}
-static inline int am33xx_cm_wait_module_ready(u16 inst, s16 cdoffs,
-					u16 clkctrl_offs)
-{
-	return 0;
-}
-#endif
-
+int am33xx_cm_init(void);
 #endif /* ASSEMBLER */
 #endif
diff --git a/arch/arm/mach-omap2/cm3xxx.c b/arch/arm/mach-omap2/cm3xxx.c
index 129a4e7..ebead8f 100644
--- a/arch/arm/mach-omap2/cm3xxx.c
+++ b/arch/arm/mach-omap2/cm3xxx.c
@@ -42,7 +42,7 @@ static void _write_clktrctrl(u8 c, s16 module, u32 mask)
 	omap2_cm_write_mod_reg(v, module, OMAP2_CM_CLKSTCTRL);
 }
 
-bool omap3xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask)
+static bool omap3xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask)
 {
 	u32 v;
 
@@ -53,22 +53,22 @@ bool omap3xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask)
 	return (v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) ? 1 : 0;
 }
 
-void omap3xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask)
+static void omap3xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask)
 {
 	_write_clktrctrl(OMAP34XX_CLKSTCTRL_ENABLE_AUTO, module, mask);
 }
 
-void omap3xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask)
+static void omap3xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask)
 {
 	_write_clktrctrl(OMAP34XX_CLKSTCTRL_DISABLE_AUTO, module, mask);
 }
 
-void omap3xxx_cm_clkdm_force_sleep(s16 module, u32 mask)
+static void omap3xxx_cm_clkdm_force_sleep(s16 module, u32 mask)
 {
 	_write_clktrctrl(OMAP34XX_CLKSTCTRL_FORCE_SLEEP, module, mask);
 }
 
-void omap3xxx_cm_clkdm_force_wakeup(s16 module, u32 mask)
+static void omap3xxx_cm_clkdm_force_wakeup(s16 module, u32 mask)
 {
 	_write_clktrctrl(OMAP34XX_CLKSTCTRL_FORCE_WAKEUP, module, mask);
 }
@@ -79,6 +79,7 @@ void omap3xxx_cm_clkdm_force_wakeup(s16 module, u32 mask)
 
 /**
  * omap3xxx_cm_wait_module_ready - wait for a module to leave idle or standby
+ * @part: PRCM partition, ignored for OMAP3
  * @prcm_mod: PRCM module offset
  * @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3)
  * @idlest_shift: shift of the bit in the CM_IDLEST* register to check
@@ -87,7 +88,8 @@ void omap3xxx_cm_clkdm_force_wakeup(s16 module, u32 mask)
  * (@prcm_mod, @idlest_id, @idlest_shift) is clocked.  Return 0 upon
  * success or -EBUSY if the module doesn't enable in time.
  */
-int omap3xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift)
+static int omap3xxx_cm_wait_module_ready(u8 part, s16 prcm_mod, u16 idlest_id,
+					 u8 idlest_shift)
 {
 	int ena = 0, i = 0;
 	u8 cm_idlest_reg;
@@ -116,8 +118,9 @@ int omap3xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift)
  * XXX This function is only needed until absolute register addresses are
  * removed from the OMAP struct clk records.
  */
-int omap3xxx_cm_split_idlest_reg(void __iomem *idlest_reg, s16 *prcm_inst,
-				 u8 *idlest_reg_id)
+static int omap3xxx_cm_split_idlest_reg(void __iomem *idlest_reg,
+					s16 *prcm_inst,
+					u8 *idlest_reg_id)
 {
 	unsigned long offs;
 	u8 idlest_offs;
diff --git a/arch/arm/mach-omap2/cm3xxx.h b/arch/arm/mach-omap2/cm3xxx.h
index 7a16b55..734a858 100644
--- a/arch/arm/mach-omap2/cm3xxx.h
+++ b/arch/arm/mach-omap2/cm3xxx.h
@@ -68,18 +68,6 @@
 
 #ifndef __ASSEMBLER__
 
-extern void omap3xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask);
-extern void omap3xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask);
-extern void omap3xxx_cm_clkdm_force_sleep(s16 module, u32 mask);
-extern void omap3xxx_cm_clkdm_force_wakeup(s16 module, u32 mask);
-
-extern bool omap3xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask);
-extern int omap3xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id,
-					 u8 idlest_shift);
-
-extern int omap3xxx_cm_split_idlest_reg(void __iomem *idlest_reg,
-					s16 *prcm_inst, u8 *idlest_reg_id);
-
 extern void omap3_cm_save_context(void);
 extern void omap3_cm_restore_context(void);
 extern void omap3_cm_save_scratchpad_contents(u32 *ptr);
diff --git a/arch/arm/mach-omap2/cm44xx.c b/arch/arm/mach-omap2/cm44xx.c
deleted file mode 100644
index fe5cc7b..0000000
--- a/arch/arm/mach-omap2/cm44xx.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * OMAP4 CM1, CM2 module low-level functions
- *
- * Copyright (C) 2010 Nokia Corporation
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * These functions are intended to be used only by the cminst44xx.c file.
- * XXX Perhaps we should just move them there and make them static.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include "cm.h"
-#include "cm1_44xx.h"
-#include "cm2_44xx.h"
-
-/* CM1 hardware module low-level functions */
-
-/* Read a register in CM1 */
-u32 omap4_cm1_read_inst_reg(s16 inst, u16 reg)
-{
-	return readl_relaxed(cm_base + inst + reg);
-}
-
-/* Write into a register in CM1 */
-void omap4_cm1_write_inst_reg(u32 val, s16 inst, u16 reg)
-{
-	writel_relaxed(val, cm_base + inst + reg);
-}
-
-/* Read a register in CM2 */
-u32 omap4_cm2_read_inst_reg(s16 inst, u16 reg)
-{
-	return readl_relaxed(cm2_base + inst + reg);
-}
-
-/* Write into a register in CM2 */
-void omap4_cm2_write_inst_reg(u32 val, s16 inst, u16 reg)
-{
-	writel_relaxed(val, cm2_base + inst + reg);
-}
diff --git a/arch/arm/mach-omap2/cm44xx.h b/arch/arm/mach-omap2/cm44xx.h
index 3380bee..728d06a 100644
--- a/arch/arm/mach-omap2/cm44xx.h
+++ b/arch/arm/mach-omap2/cm44xx.h
@@ -23,4 +23,7 @@
 #define OMAP4_CM_CLKSTCTRL				0x0000
 #define OMAP4_CM_STATICDEP				0x0004
 
+void omap_cm_base_init(void);
+int omap4_cm_init(void);
+
 #endif
diff --git a/arch/arm/mach-omap2/cm_44xx_54xx.h b/arch/arm/mach-omap2/cm_44xx_54xx.h
deleted file mode 100644
index cbb2116..0000000
--- a/arch/arm/mach-omap2/cm_44xx_54xx.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * OMAP44xx and OMAP54xx CM1/CM2 function prototypes
- *
- * Copyright (C) 2009-2013 Texas Instruments, Inc.
- * Copyright (C) 2009-2010 Nokia Corporation
- *
- * Paul Walmsley (paul@pwsan.com)
- * Rajendra Nayak (rnayak@ti.com)
- * Benoit Cousson (b-cousson@ti.com)
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CM_44XX_54XX_H
-#define __ARCH_ARM_MACH_OMAP2_CM_44XX_55XX_H
-
-/* CM1 Function prototypes */
-extern u32 omap4_cm1_read_inst_reg(s16 inst, u16 idx);
-extern void omap4_cm1_write_inst_reg(u32 val, s16 inst, u16 idx);
-extern u32 omap4_cm1_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx);
-
-/* CM2 Function prototypes */
-extern u32 omap4_cm2_read_inst_reg(s16 inst, u16 idx);
-extern void omap4_cm2_write_inst_reg(u32 val, s16 inst, u16 idx);
-extern u32 omap4_cm2_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx);
-
-#endif
diff --git a/arch/arm/mach-omap2/cm_common.c b/arch/arm/mach-omap2/cm_common.c
index 8f6c471..8fe02fce 100644
--- a/arch/arm/mach-omap2/cm_common.c
+++ b/arch/arm/mach-omap2/cm_common.c
@@ -72,9 +72,10 @@ int cm_split_idlest_reg(void __iomem *idlest_reg, s16 *prcm_inst,
 }
 
 /**
- * cm_wait_module_ready - wait for a module to leave idle or standby
+ * omap_cm_wait_module_ready - wait for a module to leave idle or standby
+ * @part: PRCM partition
  * @prcm_mod: PRCM module offset
- * @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3)
+ * @idlest_reg: CM_IDLESTx register
  * @idlest_shift: shift of the bit in the CM_IDLEST* register to check
  *
  * Wait for the PRCM to indicate that the module identified by
@@ -83,7 +84,8 @@ int cm_split_idlest_reg(void __iomem *idlest_reg, s16 *prcm_inst,
  * no per-SoC wait_module_ready() function pointer has been registered
  * or if the idlest register is unknown on the SoC.
  */
-int cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift)
+int omap_cm_wait_module_ready(u8 part, s16 prcm_mod, u16 idlest_reg,
+			      u8 idlest_shift)
 {
 	if (!cm_ll_data->wait_module_ready) {
 		WARN_ONCE(1, "cm: %s: no low-level function defined\n",
@@ -91,7 +93,79 @@ int cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift)
 		return -EINVAL;
 	}
 
-	return cm_ll_data->wait_module_ready(prcm_mod, idlest_id, idlest_shift);
+	return cm_ll_data->wait_module_ready(part, prcm_mod, idlest_reg,
+					     idlest_shift);
+}
+
+/**
+ * omap_cm_wait_module_idle - wait for a module to enter idle or standby
+ * @part: PRCM partition
+ * @prcm_mod: PRCM module offset
+ * @idlest_reg: CM_IDLESTx register
+ * @idlest_shift: shift of the bit in the CM_IDLEST* register to check
+ *
+ * Wait for the PRCM to indicate that the module identified by
+ * (@prcm_mod, @idlest_id, @idlest_shift) is no longer clocked.  Return
+ * 0 upon success, -EBUSY if the module doesn't enable in time, or
+ * -EINVAL if no per-SoC wait_module_idle() function pointer has been
+ * registered or if the idlest register is unknown on the SoC.
+ */
+int omap_cm_wait_module_idle(u8 part, s16 prcm_mod, u16 idlest_reg,
+			     u8 idlest_shift)
+{
+	if (!cm_ll_data->wait_module_idle) {
+		WARN_ONCE(1, "cm: %s: no low-level function defined\n",
+			  __func__);
+		return -EINVAL;
+	}
+
+	return cm_ll_data->wait_module_idle(part, prcm_mod, idlest_reg,
+					    idlest_shift);
+}
+
+/**
+ * omap_cm_module_enable - enable a module
+ * @mode: target mode for the module
+ * @part: PRCM partition
+ * @inst: PRCM instance
+ * @clkctrl_offs: CM_CLKCTRL register offset for the module
+ *
+ * Enables clocks for a module identified by (@part, @inst, @clkctrl_offs)
+ * making its IO space accessible. Return 0 upon success, -EINVAL if no
+ * per-SoC module_enable() function pointer has been registered.
+ */
+int omap_cm_module_enable(u8 mode, u8 part, u16 inst, u16 clkctrl_offs)
+{
+	if (!cm_ll_data->module_enable) {
+		WARN_ONCE(1, "cm: %s: no low-level function defined\n",
+			  __func__);
+		return -EINVAL;
+	}
+
+	cm_ll_data->module_enable(mode, part, inst, clkctrl_offs);
+	return 0;
+}
+
+/**
+ * omap_cm_module_disable - disable a module
+ * @part: PRCM partition
+ * @inst: PRCM instance
+ * @clkctrl_offs: CM_CLKCTRL register offset for the module
+ *
+ * Disables clocks for a module identified by (@part, @inst, @clkctrl_offs)
+ * makings its IO space inaccessible. Return 0 upon success, -EINVAL if
+ * no per-SoC module_disable() function pointer has been registered.
+ */
+int omap_cm_module_disable(u8 part, u16 inst, u16 clkctrl_offs)
+{
+	if (!cm_ll_data->module_disable) {
+		WARN_ONCE(1, "cm: %s: no low-level function defined\n",
+			  __func__);
+		return -EINVAL;
+	}
+
+	cm_ll_data->module_disable(part, inst, clkctrl_offs);
+	return 0;
 }
 
 /**
diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c
index 12aca56..95a8cff 100644
--- a/arch/arm/mach-omap2/cminst44xx.c
+++ b/arch/arm/mach-omap2/cminst44xx.c
@@ -26,7 +26,6 @@
 #include "cm1_44xx.h"
 #include "cm2_44xx.h"
 #include "cm44xx.h"
-#include "cminst44xx.h"
 #include "cm-regbits-34xx.h"
 #include "prcm44xx.h"
 #include "prm44xx.h"
@@ -74,17 +73,18 @@ void omap_cm_base_init(void)
 
 /* Private functions */
 
+static u32 omap4_cminst_read_inst_reg(u8 part, u16 inst, u16 idx);
+
 /**
  * _clkctrl_idlest - read a CM_*_CLKCTRL register; mask & shift IDLEST bitfield
  * @part: PRCM partition ID that the CM_CLKCTRL register exists in
  * @inst: CM instance register offset (*_INST macro)
- * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
  * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
  *
  * Return the IDLEST bitfield of a CM_*_CLKCTRL register, shifted down to
  * bit 0.
  */
-static u32 _clkctrl_idlest(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs)
+static u32 _clkctrl_idlest(u8 part, u16 inst, u16 clkctrl_offs)
 {
 	u32 v = omap4_cminst_read_inst_reg(part, inst, clkctrl_offs);
 	v &= OMAP4430_IDLEST_MASK;
@@ -96,26 +96,23 @@ static u32 _clkctrl_idlest(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs)
  * _is_module_ready - can module registers be accessed without causing an abort?
  * @part: PRCM partition ID that the CM_CLKCTRL register exists in
  * @inst: CM instance register offset (*_INST macro)
- * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
  * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
  *
  * Returns true if the module's CM_*_CLKCTRL.IDLEST bitfield is either
  * *FUNCTIONAL or *INTERFACE_IDLE; false otherwise.
  */
-static bool _is_module_ready(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs)
+static bool _is_module_ready(u8 part, u16 inst, u16 clkctrl_offs)
 {
 	u32 v;
 
-	v = _clkctrl_idlest(part, inst, cdoffs, clkctrl_offs);
+	v = _clkctrl_idlest(part, inst, clkctrl_offs);
 
 	return (v == CLKCTRL_IDLEST_FUNCTIONAL ||
 		v == CLKCTRL_IDLEST_INTERFACE_IDLE) ? true : false;
 }
 
-/* Public functions */
-
 /* Read a register in a CM instance */
-u32 omap4_cminst_read_inst_reg(u8 part, u16 inst, u16 idx)
+static u32 omap4_cminst_read_inst_reg(u8 part, u16 inst, u16 idx)
 {
 	BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS ||
 	       part == OMAP4430_INVALID_PRCM_PARTITION ||
@@ -124,7 +121,7 @@ u32 omap4_cminst_read_inst_reg(u8 part, u16 inst, u16 idx)
 }
 
 /* Write into a register in a CM instance */
-void omap4_cminst_write_inst_reg(u32 val, u8 part, u16 inst, u16 idx)
+static void omap4_cminst_write_inst_reg(u32 val, u8 part, u16 inst, u16 idx)
 {
 	BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS ||
 	       part == OMAP4430_INVALID_PRCM_PARTITION ||
@@ -133,8 +130,8 @@ void omap4_cminst_write_inst_reg(u32 val, u8 part, u16 inst, u16 idx)
 }
 
 /* Read-modify-write a register in CM1. Caller must lock */
-u32 omap4_cminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part, u16 inst,
-				   s16 idx)
+static u32 omap4_cminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part, u16 inst,
+					  s16 idx)
 {
 	u32 v;
 
@@ -146,17 +143,18 @@ u32 omap4_cminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part, u16 inst,
 	return v;
 }
 
-u32 omap4_cminst_set_inst_reg_bits(u32 bits, u8 part, u16 inst, s16 idx)
+static u32 omap4_cminst_set_inst_reg_bits(u32 bits, u8 part, u16 inst, s16 idx)
 {
 	return omap4_cminst_rmw_inst_reg_bits(bits, bits, part, inst, idx);
 }
 
-u32 omap4_cminst_clear_inst_reg_bits(u32 bits, u8 part, u16 inst, s16 idx)
+static u32 omap4_cminst_clear_inst_reg_bits(u32 bits, u8 part, u16 inst,
+					    s16 idx)
 {
 	return omap4_cminst_rmw_inst_reg_bits(bits, 0x0, part, inst, idx);
 }
 
-u32 omap4_cminst_read_inst_reg_bits(u8 part, u16 inst, s16 idx, u32 mask)
+static u32 omap4_cminst_read_inst_reg_bits(u8 part, u16 inst, s16 idx, u32 mask)
 {
 	u32 v;
 
@@ -200,7 +198,7 @@ static void _clktrctrl_write(u8 c, u8 part, u16 inst, u16 cdoffs)
  * Returns true if the clockdomain referred to by (@part, @inst, @cdoffs)
  * is in hardware-supervised idle mode, or 0 otherwise.
  */
-bool omap4_cminst_is_clkdm_in_hwsup(u8 part, u16 inst, u16 cdoffs)
+static bool omap4_cminst_is_clkdm_in_hwsup(u8 part, u16 inst, u16 cdoffs)
 {
 	u32 v;
 
@@ -220,7 +218,7 @@ bool omap4_cminst_is_clkdm_in_hwsup(u8 part, u16 inst, u16 cdoffs)
  * Put a clockdomain referred to by (@part, @inst, @cdoffs) into
  * hardware-supervised idle mode.  No return value.
  */
-void omap4_cminst_clkdm_enable_hwsup(u8 part, u16 inst, u16 cdoffs)
+static void omap4_cminst_clkdm_enable_hwsup(u8 part, u16 inst, u16 cdoffs)
 {
 	_clktrctrl_write(OMAP34XX_CLKSTCTRL_ENABLE_AUTO, part, inst, cdoffs);
 }
@@ -235,7 +233,7 @@ void omap4_cminst_clkdm_enable_hwsup(u8 part, u16 inst, u16 cdoffs)
  * software-supervised idle mode, i.e., controlled manually by the
  * Linux OMAP clockdomain code.  No return value.
  */
-void omap4_cminst_clkdm_disable_hwsup(u8 part, u16 inst, u16 cdoffs)
+static void omap4_cminst_clkdm_disable_hwsup(u8 part, u16 inst, u16 cdoffs)
 {
 	_clktrctrl_write(OMAP34XX_CLKSTCTRL_DISABLE_AUTO, part, inst, cdoffs);
 }
@@ -249,7 +247,7 @@ void omap4_cminst_clkdm_disable_hwsup(u8 part, u16 inst, u16 cdoffs)
  * Take a clockdomain referred to by (@part, @inst, @cdoffs) out of idle,
  * waking it up.  No return value.
  */
-void omap4_cminst_clkdm_force_wakeup(u8 part, u16 inst, u16 cdoffs)
+static void omap4_cminst_clkdm_force_wakeup(u8 part, u16 inst, u16 cdoffs)
 {
 	_clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_WAKEUP, part, inst, cdoffs);
 }
@@ -258,7 +256,7 @@ void omap4_cminst_clkdm_force_wakeup(u8 part, u16 inst, u16 cdoffs)
  *
  */
 
-void omap4_cminst_clkdm_force_sleep(u8 part, u16 inst, u16 cdoffs)
+static void omap4_cminst_clkdm_force_sleep(u8 part, u16 inst, u16 cdoffs)
 {
 	_clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_SLEEP, part, inst, cdoffs);
 }
@@ -267,23 +265,23 @@ void omap4_cminst_clkdm_force_sleep(u8 part, u16 inst, u16 cdoffs)
  * omap4_cminst_wait_module_ready - wait for a module to be in 'func' state
  * @part: PRCM partition ID that the CM_CLKCTRL register exists in
  * @inst: CM instance register offset (*_INST macro)
- * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
  * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
+ * @bit_shift: bit shift for the register, ignored for OMAP4+
  *
  * Wait for the module IDLEST to be functional. If the idle state is in any
  * the non functional state (trans, idle or disabled), module and thus the
  * sysconfig cannot be accessed and will probably lead to an "imprecise
  * external abort"
  */
-int omap4_cminst_wait_module_ready(u8 part, u16 inst, s16 cdoffs,
-				   u16 clkctrl_offs)
+static int omap4_cminst_wait_module_ready(u8 part, s16 inst, u16 clkctrl_offs,
+					  u8 bit_shift)
 {
 	int i = 0;
 
 	if (!clkctrl_offs)
 		return 0;
 
-	omap_test_timeout(_is_module_ready(part, inst, cdoffs, clkctrl_offs),
+	omap_test_timeout(_is_module_ready(part, inst, clkctrl_offs),
 			  MAX_MODULE_READY_TIME, i);
 
 	return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
@@ -294,21 +292,22 @@ int omap4_cminst_wait_module_ready(u8 part, u16 inst, s16 cdoffs,
  * state
  * @part: PRCM partition ID that the CM_CLKCTRL register exists in
  * @inst: CM instance register offset (*_INST macro)
- * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
  * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
+ * @bit_shift: Bit shift for the register, ignored for OMAP4+
  *
  * Wait for the module IDLEST to be disabled. Some PRCM transition,
  * like reset assertion or parent clock de-activation must wait the
  * module to be fully disabled.
  */
-int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs)
+static int omap4_cminst_wait_module_idle(u8 part, s16 inst, u16 clkctrl_offs,
+					 u8 bit_shift)
 {
 	int i = 0;
 
 	if (!clkctrl_offs)
 		return 0;
 
-	omap_test_timeout((_clkctrl_idlest(part, inst, cdoffs, clkctrl_offs) ==
+	omap_test_timeout((_clkctrl_idlest(part, inst, clkctrl_offs) ==
 			   CLKCTRL_IDLEST_DISABLED),
 			  MAX_MODULE_DISABLE_TIME, i);
 
@@ -320,13 +319,12 @@ int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_off
  * @mode: Module mode (SW or HW)
  * @part: PRCM partition ID that the CM_CLKCTRL register exists in
  * @inst: CM instance register offset (*_INST macro)
- * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
  * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
  *
  * No return value.
  */
-void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst, s16 cdoffs,
-			    u16 clkctrl_offs)
+static void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst,
+				       u16 clkctrl_offs)
 {
 	u32 v;
 
@@ -340,13 +338,11 @@ void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst, s16 cdoffs,
  * omap4_cminst_module_disable - Disable the module inside CLKCTRL
  * @part: PRCM partition ID that the CM_CLKCTRL register exists in
  * @inst: CM instance register offset (*_INST macro)
- * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
  * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
  *
  * No return value.
  */
-void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs,
-			     u16 clkctrl_offs)
+static void omap4_cminst_module_disable(u8 part, u16 inst, u16 clkctrl_offs)
 {
 	u32 v;
 
@@ -510,3 +506,21 @@ struct clkdm_ops am43xx_clkdm_operations = {
 	.clkdm_clk_enable	= omap4_clkdm_clk_enable,
 	.clkdm_clk_disable	= omap4_clkdm_clk_disable,
 };
+
+static struct cm_ll_data omap4xxx_cm_ll_data = {
+	.wait_module_ready	= &omap4_cminst_wait_module_ready,
+	.wait_module_idle	= &omap4_cminst_wait_module_idle,
+	.module_enable		= &omap4_cminst_module_enable,
+	.module_disable		= &omap4_cminst_module_disable,
+};
+
+int __init omap4_cm_init(void)
+{
+	return cm_register(&omap4xxx_cm_ll_data);
+}
+
+static void __exit omap4_cm_exit(void)
+{
+	cm_unregister(&omap4xxx_cm_ll_data);
+}
+__exitcall(omap4_cm_exit);
diff --git a/arch/arm/mach-omap2/cminst44xx.h b/arch/arm/mach-omap2/cminst44xx.h
deleted file mode 100644
index 7f56ea4..0000000
--- a/arch/arm/mach-omap2/cminst44xx.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * OMAP4 Clock Management (CM) function prototypes
- *
- * Copyright (C) 2010 Nokia Corporation
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ARCH_ASM_MACH_OMAP2_CMINST44XX_H
-#define __ARCH_ASM_MACH_OMAP2_CMINST44XX_H
-
-bool omap4_cminst_is_clkdm_in_hwsup(u8 part, u16 inst, u16 cdoffs);
-void omap4_cminst_clkdm_enable_hwsup(u8 part, u16 inst, u16 cdoffs);
-void omap4_cminst_clkdm_disable_hwsup(u8 part, u16 inst, u16 cdoffs);
-void omap4_cminst_clkdm_force_sleep(u8 part, u16 inst, u16 cdoffs);
-void omap4_cminst_clkdm_force_wakeup(u8 part, u16 inst, u16 cdoffs);
-extern int omap4_cminst_wait_module_ready(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs);
-extern int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs,
-					 u16 clkctrl_offs);
-extern void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst, s16 cdoffs,
-				       u16 clkctrl_offs);
-extern void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs,
-					u16 clkctrl_offs);
-/*
- * In an ideal world, we would not export these low-level functions,
- * but this will probably take some time to fix properly
- */
-u32 omap4_cminst_read_inst_reg(u8 part, u16 inst, u16 idx);
-void omap4_cminst_write_inst_reg(u32 val, u8 part, u16 inst, u16 idx);
-u32 omap4_cminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part,
-				   u16 inst, s16 idx);
-u32 omap4_cminst_set_inst_reg_bits(u32 bits, u8 part, u16 inst,
-				   s16 idx);
-u32 omap4_cminst_clear_inst_reg_bits(u32 bits, u8 part, u16 inst,
-				     s16 idx);
-extern u32 omap4_cminst_read_inst_reg_bits(u8 part, u16 inst, s16 idx,
-					   u32 mask);
-
-extern void omap_cm_base_init(void);
-
-#endif
diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c
index ac3d789..20e120d 100644
--- a/arch/arm/mach-omap2/dpll3xxx.c
+++ b/arch/arm/mach-omap2/dpll3xxx.c
@@ -460,25 +460,24 @@ void omap3_noncore_dpll_disable(struct clk_hw *hw)
 /* Non-CORE DPLL rate set code */
 
 /**
- * omap3_noncore_dpll_set_rate - set non-core DPLL rate
- * @clk: struct clk * of DPLL to set
- * @rate: rounded target rate
+ * omap3_noncore_dpll_determine_rate - determine rate for a DPLL
+ * @hw: pointer to the clock to determine rate for
+ * @rate: target rate for the DPLL
+ * @best_parent_rate: pointer for returning best parent rate
+ * @best_parent_clk: pointer for returning best parent clock
  *
- * Set the DPLL CLKOUT to the target rate.  If the DPLL can enter
- * low-power bypass, and the target rate is the bypass source clock
- * rate, then configure the DPLL for bypass.  Otherwise, round the
- * target rate if it hasn't been done already, then program and lock
- * the DPLL.  Returns -EINVAL upon error, or 0 upon success.
+ * Determines which DPLL mode to use for reaching a desired target rate.
+ * Checks whether the DPLL shall be in bypass or locked mode, and if
+ * locked, calculates the M,N values for the DPLL via round-rate.
+ * Returns a positive clock rate with success, negative error value
+ * in failure.
  */
-int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
-					unsigned long parent_rate)
+long omap3_noncore_dpll_determine_rate(struct clk_hw *hw, unsigned long rate,
+				       unsigned long *best_parent_rate,
+				       struct clk **best_parent_clk)
 {
 	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-	struct clk *new_parent = NULL;
-	unsigned long rrate;
-	u16 freqsel = 0;
 	struct dpll_data *dd;
-	int ret;
 
 	if (!hw || !rate)
 		return -EINVAL;
@@ -489,61 +488,121 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
 
 	if (__clk_get_rate(dd->clk_bypass) == rate &&
 	    (dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
-		pr_debug("%s: %s: set rate: entering bypass.\n",
-			 __func__, __clk_get_name(hw->clk));
+		*best_parent_clk = dd->clk_bypass;
+	} else {
+		rate = omap2_dpll_round_rate(hw, rate, best_parent_rate);
+		*best_parent_clk = dd->clk_ref;
+	}
+
+	*best_parent_rate = rate;
+
+	return rate;
+}
+
+/**
+ * omap3_noncore_dpll_set_parent - set parent for a DPLL clock
+ * @hw: pointer to the clock to set parent for
+ * @index: parent index to select
+ *
+ * Sets parent for a DPLL clock. This sets the DPLL into bypass or
+ * locked mode. Returns 0 with success, negative error value otherwise.
+ */
+int omap3_noncore_dpll_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+	int ret;
 
-		__clk_prepare(dd->clk_bypass);
-		clk_enable(dd->clk_bypass);
+	if (!hw)
+		return -EINVAL;
+
+	if (index)
 		ret = _omap3_noncore_dpll_bypass(clk);
-		if (!ret)
-			new_parent = dd->clk_bypass;
-		clk_disable(dd->clk_bypass);
-		__clk_unprepare(dd->clk_bypass);
-	} else {
-		__clk_prepare(dd->clk_ref);
-		clk_enable(dd->clk_ref);
-
-		/* XXX this check is probably pointless in the CCF context */
-		if (dd->last_rounded_rate != rate) {
-			rrate = __clk_round_rate(hw->clk, rate);
-			if (rrate != rate) {
-				pr_warn("%s: %s: final rate %lu does not match desired rate %lu\n",
-					__func__, __clk_get_name(hw->clk),
-					rrate, rate);
-				rate = rrate;
-			}
-		}
+	else
+		ret = _omap3_noncore_dpll_lock(clk);
 
-		if (dd->last_rounded_rate == 0)
-			return -EINVAL;
+	return ret;
+}
 
-		/* Freqsel is available only on OMAP343X devices */
-		if (ti_clk_features.flags & TI_CLK_DPLL_HAS_FREQSEL) {
-			freqsel = _omap3_dpll_compute_freqsel(clk,
-						dd->last_rounded_n);
-			WARN_ON(!freqsel);
-		}
+/**
+ * omap3_noncore_dpll_set_rate - set rate for a DPLL clock
+ * @hw: pointer to the clock to set parent for
+ * @rate: target rate for the clock
+ * @parent_rate: rate of the parent clock
+ *
+ * Sets rate for a DPLL clock. First checks if the clock parent is
+ * reference clock (in bypass mode, the rate of the clock can't be
+ * changed) and proceeds with the rate change operation. Returns 0
+ * with success, negative error value otherwise.
+ */
+int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long parent_rate)
+{
+	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+	struct dpll_data *dd;
+	u16 freqsel = 0;
+	int ret;
+
+	if (!hw || !rate)
+		return -EINVAL;
+
+	dd = clk->dpll_data;
+	if (!dd)
+		return -EINVAL;
 
-		pr_debug("%s: %s: set rate: locking rate to %lu.\n",
-			 __func__, __clk_get_name(hw->clk), rate);
+	if (__clk_get_parent(hw->clk) != dd->clk_ref)
+		return -EINVAL;
+
+	if (dd->last_rounded_rate == 0)
+		return -EINVAL;
 
-		ret = omap3_noncore_dpll_program(clk, freqsel);
-		if (!ret)
-			new_parent = dd->clk_ref;
-		clk_disable(dd->clk_ref);
-		__clk_unprepare(dd->clk_ref);
+	/* Freqsel is available only on OMAP343X devices */
+	if (ti_clk_features.flags & TI_CLK_DPLL_HAS_FREQSEL) {
+		freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n);
+		WARN_ON(!freqsel);
 	}
-	/*
-	* FIXME - this is all wrong.  common code handles reparenting and
-	* migrating prepare/enable counts.  dplls should be a multiplexer
-	* clock and this should be a set_parent operation so that all of that
-	* stuff is inherited for free
-	*/
 
-	if (!ret && clk_get_parent(hw->clk) != new_parent)
-		__clk_reparent(hw->clk, new_parent);
+	pr_debug("%s: %s: set rate: locking rate to %lu.\n", __func__,
+		 __clk_get_name(hw->clk), rate);
 
-	return 0;
+	ret = omap3_noncore_dpll_program(clk, freqsel);
+
+	return ret;
+}
+
+/**
+ * omap3_noncore_dpll_set_rate_and_parent - set rate and parent for a DPLL clock
+ * @hw: pointer to the clock to set rate and parent for
+ * @rate: target rate for the DPLL
+ * @parent_rate: clock rate of the DPLL parent
+ * @index: new parent index for the DPLL, 0 - reference, 1 - bypass
+ *
+ * Sets rate and parent for a DPLL clock. If new parent is the bypass
+ * clock, only selects the parent. Otherwise proceeds with a rate
+ * change, as this will effectively also change the parent as the
+ * DPLL is put into locked mode. Returns 0 with success, negative error
+ * value otherwise.
+ */
+int omap3_noncore_dpll_set_rate_and_parent(struct clk_hw *hw,
+					   unsigned long rate,
+					   unsigned long parent_rate,
+					   u8 index)
+{
+	int ret;
+
+	if (!hw || !rate)
+		return -EINVAL;
+
+	/*
+	 * clk-ref at index[0], in which case we only need to set rate,
+	 * the parent will be changed automatically with the lock sequence.
+	 * With clk-bypass case we only need to change parent.
+	 */
+	if (index)
+		ret = omap3_noncore_dpll_set_parent(hw, index);
+	else
+		ret = omap3_noncore_dpll_set_rate(hw, rate, parent_rate);
+
+	return ret;
 }
 
 /* DPLL autoidle read/set code */
diff --git a/arch/arm/mach-omap2/dpll44xx.c b/arch/arm/mach-omap2/dpll44xx.c
index 4613f1e..535822f 100644
--- a/arch/arm/mach-omap2/dpll44xx.c
+++ b/arch/arm/mach-omap2/dpll44xx.c
@@ -207,3 +207,44 @@ out:
 
 	return dd->last_rounded_rate;
 }
+
+/**
+ * omap4_dpll_regm4xen_determine_rate - determine rate for a DPLL
+ * @hw: pointer to the clock to determine rate for
+ * @rate: target rate for the DPLL
+ * @best_parent_rate: pointer for returning best parent rate
+ * @best_parent_clk: pointer for returning best parent clock
+ *
+ * Determines which DPLL mode to use for reaching a desired rate.
+ * Checks whether the DPLL shall be in bypass or locked mode, and if
+ * locked, calculates the M,N values for the DPLL via round-rate.
+ * Returns a positive clock rate with success, negative error value
+ * in failure.
+ */
+long omap4_dpll_regm4xen_determine_rate(struct clk_hw *hw, unsigned long rate,
+					unsigned long *best_parent_rate,
+					struct clk **best_parent_clk)
+{
+	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+	struct dpll_data *dd;
+
+	if (!hw || !rate)
+		return -EINVAL;
+
+	dd = clk->dpll_data;
+	if (!dd)
+		return -EINVAL;
+
+	if (__clk_get_rate(dd->clk_bypass) == rate &&
+	    (dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
+		*best_parent_clk = dd->clk_bypass;
+	} else {
+		rate = omap4_dpll_regm4xen_round_rate(hw, rate,
+						      best_parent_rate);
+		*best_parent_clk = dd->clk_ref;
+	}
+
+	*best_parent_rate = rate;
+
+	return rate;
+}
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 03cbb16..4fc8383 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -45,13 +45,15 @@
 #include "sram.h"
 #include "cm2xxx.h"
 #include "cm3xxx.h"
+#include "cm33xx.h"
+#include "cm44xx.h"
 #include "prm.h"
 #include "cm.h"
 #include "prcm_mpu44xx.h"
 #include "prminst44xx.h"
-#include "cminst44xx.h"
 #include "prm2xxx.h"
 #include "prm3xxx.h"
+#include "prm33xx.h"
 #include "prm44xx.h"
 #include "opp2xxx.h"
 
@@ -565,6 +567,8 @@ void __init am33xx_init_early(void)
 	omap2_set_globals_cm(AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE), NULL);
 	omap3xxx_check_revision();
 	am33xx_check_features();
+	am33xx_prm_init();
+	am33xx_cm_init();
 	am33xx_powerdomains_init();
 	am33xx_clockdomains_init();
 	am33xx_hwmod_init();
@@ -591,6 +595,8 @@ void __init am43xx_init_early(void)
 	omap_cm_base_init();
 	omap3xxx_check_revision();
 	am33xx_check_features();
+	omap44xx_prm_init();
+	omap4_cm_init();
 	am43xx_powerdomains_init();
 	am43xx_clockdomains_init();
 	am43xx_hwmod_init();
@@ -620,6 +626,7 @@ void __init omap4430_init_early(void)
 	omap_cm_base_init();
 	omap4xxx_check_revision();
 	omap4xxx_check_features();
+	omap4_cm_init();
 	omap4_pm_init_early();
 	omap44xx_prm_init();
 	omap44xx_voltagedomains_init();
@@ -655,6 +662,7 @@ void __init omap5_init_early(void)
 	omap_cm_base_init();
 	omap44xx_prm_init();
 	omap5xxx_check_revision();
+	omap4_cm_init();
 	omap54xx_voltagedomains_init();
 	omap54xx_powerdomains_init();
 	omap54xx_clockdomains_init();
@@ -686,6 +694,7 @@ void __init dra7xx_init_early(void)
 	omap_cm_base_init();
 	omap44xx_prm_init();
 	dra7xxx_check_revision();
+	omap4_cm_init();
 	dra7xx_powerdomains_init();
 	dra7xx_clockdomains_init();
 	dra7xx_hwmod_init();
diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
index 6944ae3..79f49d9 100644
--- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c
+++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
@@ -227,7 +227,7 @@ static void __init save_l2x0_context(void)
 int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state)
 {
 	struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu);
-	unsigned int save_state = 0;
+	unsigned int save_state = 0, cpu_logic_state = PWRDM_POWER_RET;
 	unsigned int wakeup_cpu;
 
 	if (omap_rev() == OMAP4430_REV_ES1_0)
@@ -239,6 +239,7 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state)
 		save_state = 0;
 		break;
 	case PWRDM_POWER_OFF:
+		cpu_logic_state = PWRDM_POWER_OFF;
 		save_state = 1;
 		break;
 	case PWRDM_POWER_RET:
@@ -270,6 +271,7 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state)
 
 	cpu_clear_prev_logic_pwrst(cpu);
 	pwrdm_set_next_pwrst(pm_info->pwrdm, power_state);
+	pwrdm_set_logic_retst(pm_info->pwrdm, cpu_logic_state);
 	set_cpu_wakeup_addr(cpu, virt_to_phys(omap_pm_ops.resume));
 	omap_pm_ops.scu_prepare(cpu, power_state);
 	l2x0_pwrst_prepare(cpu, save_state);
diff --git a/arch/arm/mach-omap2/omap2-restart.c b/arch/arm/mach-omap2/omap2-restart.c
index 68423e2..d937b2e 100644
--- a/arch/arm/mach-omap2/omap2-restart.c
+++ b/arch/arm/mach-omap2/omap2-restart.c
@@ -15,7 +15,7 @@
 
 #include "soc.h"
 #include "common.h"
-#include "prm2xxx.h"
+#include "prm.h"
 
 /*
  * reset_virt_prcm_set_ck, reset_sys_ck: pointers to the virt_prcm_set
@@ -40,8 +40,7 @@ void omap2xxx_restart(enum reboot_mode mode, const char *cmd)
 
 	/* XXX Should save the cmd argument for use after the reboot */
 
-	omap2xxx_prm_dpll_reset(); /* never returns */
-	while (1);
+	omap_prm_reset_system();
 }
 
 /**
diff --git a/arch/arm/mach-omap2/omap3-restart.c b/arch/arm/mach-omap2/omap3-restart.c
index 5de2a0c..103a49f 100644
--- a/arch/arm/mach-omap2/omap3-restart.c
+++ b/arch/arm/mach-omap2/omap3-restart.c
@@ -14,10 +14,8 @@
 #include <linux/init.h>
 #include <linux/reboot.h>
 
-#include "iomap.h"
-#include "common.h"
 #include "control.h"
-#include "prm3xxx.h"
+#include "prm.h"
 
 /* Global address base setup code */
 
@@ -32,6 +30,5 @@
 void omap3xxx_restart(enum reboot_mode mode, const char *cmd)
 {
 	omap3_ctrl_write_boot_mode((cmd ? (u8)*cmd : 0));
-	omap3xxx_prm_dpll3_reset(); /* never returns */
-	while (1);
+	omap_prm_reset_system();
 }
diff --git a/arch/arm/mach-omap2/omap4-restart.c b/arch/arm/mach-omap2/omap4-restart.c
index 41dfd7d..a99e7f7 100644
--- a/arch/arm/mach-omap2/omap4-restart.c
+++ b/arch/arm/mach-omap2/omap4-restart.c
@@ -9,7 +9,7 @@
 
 #include <linux/types.h>
 #include <linux/reboot.h>
-#include "prminst44xx.h"
+#include "prm.h"
 
 /**
  * omap44xx_restart - trigger a software restart of the SoC
@@ -22,7 +22,5 @@
 void omap44xx_restart(enum reboot_mode mode, const char *cmd)
 {
 	/* XXX Should save 'cmd' into scratchpad for use after reboot */
-	omap4_prminst_global_warm_sw_reset(); /* never returns */
-	while (1)
-		;
+	omap_prm_reset_system();
 }
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 716247e..cbb908d 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -153,7 +153,6 @@
 #include "powerdomain.h"
 #include "cm2xxx.h"
 #include "cm3xxx.h"
-#include "cminst44xx.h"
 #include "cm33xx.h"
 #include "prm.h"
 #include "prm3xxx.h"
@@ -979,31 +978,9 @@ static void _omap4_enable_module(struct omap_hwmod *oh)
 	pr_debug("omap_hwmod: %s: %s: %d\n",
 		 oh->name, __func__, oh->prcm.omap4.modulemode);
 
-	omap4_cminst_module_enable(oh->prcm.omap4.modulemode,
-				   oh->clkdm->prcm_partition,
-				   oh->clkdm->cm_inst,
-				   oh->clkdm->clkdm_offs,
-				   oh->prcm.omap4.clkctrl_offs);
-}
-
-/**
- * _am33xx_enable_module - enable CLKCTRL modulemode on AM33XX
- * @oh: struct omap_hwmod *
- *
- * Enables the PRCM module mode related to the hwmod @oh.
- * No return value.
- */
-static void _am33xx_enable_module(struct omap_hwmod *oh)
-{
-	if (!oh->clkdm || !oh->prcm.omap4.modulemode)
-		return;
-
-	pr_debug("omap_hwmod: %s: %s: %d\n",
-		 oh->name, __func__, oh->prcm.omap4.modulemode);
-
-	am33xx_cm_module_enable(oh->prcm.omap4.modulemode, oh->clkdm->cm_inst,
-				oh->clkdm->clkdm_offs,
-				oh->prcm.omap4.clkctrl_offs);
+	omap_cm_module_enable(oh->prcm.omap4.modulemode,
+			      oh->clkdm->prcm_partition,
+			      oh->clkdm->cm_inst, oh->prcm.omap4.clkctrl_offs);
 }
 
 /**
@@ -1026,35 +1003,9 @@ static int _omap4_wait_target_disable(struct omap_hwmod *oh)
 	if (oh->flags & HWMOD_NO_IDLEST)
 		return 0;
 
-	return omap4_cminst_wait_module_idle(oh->clkdm->prcm_partition,
-					     oh->clkdm->cm_inst,
-					     oh->clkdm->clkdm_offs,
-					     oh->prcm.omap4.clkctrl_offs);
-}
-
-/**
- * _am33xx_wait_target_disable - wait for a module to be disabled on AM33XX
- * @oh: struct omap_hwmod *
- *
- * Wait for a module @oh to enter slave idle.  Returns 0 if the module
- * does not have an IDLEST bit or if the module successfully enters
- * slave idle; otherwise, pass along the return value of the
- * appropriate *_cm*_wait_module_idle() function.
- */
-static int _am33xx_wait_target_disable(struct omap_hwmod *oh)
-{
-	if (!oh)
-		return -EINVAL;
-
-	if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
-		return 0;
-
-	if (oh->flags & HWMOD_NO_IDLEST)
-		return 0;
-
-	return am33xx_cm_wait_module_idle(oh->clkdm->cm_inst,
-					     oh->clkdm->clkdm_offs,
-					     oh->prcm.omap4.clkctrl_offs);
+	return omap_cm_wait_module_idle(oh->clkdm->prcm_partition,
+					oh->clkdm->cm_inst,
+					oh->prcm.omap4.clkctrl_offs, 0);
 }
 
 /**
@@ -1859,10 +1810,8 @@ static int _omap4_disable_module(struct omap_hwmod *oh)
 
 	pr_debug("omap_hwmod: %s: %s\n", oh->name, __func__);
 
-	omap4_cminst_module_disable(oh->clkdm->prcm_partition,
-				    oh->clkdm->cm_inst,
-				    oh->clkdm->clkdm_offs,
-				    oh->prcm.omap4.clkctrl_offs);
+	omap_cm_module_disable(oh->clkdm->prcm_partition, oh->clkdm->cm_inst,
+			       oh->prcm.omap4.clkctrl_offs);
 
 	v = _omap4_wait_target_disable(oh);
 	if (v)
@@ -1873,36 +1822,6 @@ static int _omap4_disable_module(struct omap_hwmod *oh)
 }
 
 /**
- * _am33xx_disable_module - enable CLKCTRL modulemode on AM33XX
- * @oh: struct omap_hwmod *
- *
- * Disable the PRCM module mode related to the hwmod @oh.
- * Return EINVAL if the modulemode is not supported and 0 in case of success.
- */
-static int _am33xx_disable_module(struct omap_hwmod *oh)
-{
-	int v;
-
-	if (!oh->clkdm || !oh->prcm.omap4.modulemode)
-		return -EINVAL;
-
-	pr_debug("omap_hwmod: %s: %s\n", oh->name, __func__);
-
-	if (_are_any_hardreset_lines_asserted(oh))
-		return 0;
-
-	am33xx_cm_module_disable(oh->clkdm->cm_inst, oh->clkdm->clkdm_offs,
-				 oh->prcm.omap4.clkctrl_offs);
-
-	v = _am33xx_wait_target_disable(oh);
-	if (v)
-		pr_warn("omap_hwmod: %s: _wait_target_disable failed\n",
-			oh->name);
-
-	return 0;
-}
-
-/**
  * _ocp_softreset - reset an omap_hwmod via the OCP_SYSCONFIG bit
  * @oh: struct omap_hwmod *
  *
@@ -2065,10 +1984,7 @@ static void _reconfigure_io_chain(void)
 
 	spin_lock_irqsave(&io_chain_lock, flags);
 
-	if (cpu_is_omap34xx())
-		omap3xxx_prm_reconfigure_io_chain();
-	else if (cpu_is_omap44xx())
-		omap44xx_prm_reconfigure_io_chain();
+	omap_prm_reconfigure_io_chain();
 
 	spin_unlock_irqrestore(&io_chain_lock, flags);
 }
@@ -2719,11 +2635,33 @@ static int __init _setup(struct omap_hwmod *oh, void *data)
 	if (oh->_state != _HWMOD_STATE_INITIALIZED)
 		return 0;
 
+	if (oh->parent_hwmod) {
+		int r;
+
+		r = _enable(oh->parent_hwmod);
+		WARN(r, "hwmod: %s: setup: failed to enable parent hwmod %s\n",
+		     oh->name, oh->parent_hwmod->name);
+	}
+
 	_setup_iclk_autoidle(oh);
 
 	if (!_setup_reset(oh))
 		_setup_postsetup(oh);
 
+	if (oh->parent_hwmod) {
+		u8 postsetup_state;
+
+		postsetup_state = oh->parent_hwmod->_postsetup_state;
+
+		if (postsetup_state == _HWMOD_STATE_IDLE)
+			_idle(oh->parent_hwmod);
+		else if (postsetup_state == _HWMOD_STATE_DISABLED)
+			_shutdown(oh->parent_hwmod);
+		else if (postsetup_state != _HWMOD_STATE_ENABLED)
+			WARN(1, "hwmod: %s: unknown postsetup state %d! defaulting to enabled\n",
+			     oh->parent_hwmod->name, postsetup_state);
+	}
+
 	return 0;
 }
 
@@ -2832,12 +2770,10 @@ static int __init _add_link(struct omap_hwmod_ocp_if *oi)
 	_alloc_links(&ml, &sl);
 
 	ml->ocp_if = oi;
-	INIT_LIST_HEAD(&ml->node);
 	list_add(&ml->node, &oi->master->master_ports);
 	oi->master->masters_cnt++;
 
 	sl->ocp_if = oi;
-	INIT_LIST_HEAD(&sl->node);
 	list_add(&sl->node, &oi->slave->slave_ports);
 	oi->slave->slaves_cnt++;
 
@@ -2927,34 +2863,7 @@ static int __init _alloc_linkspace(struct omap_hwmod_ocp_if **ois)
 /* Static functions intended only for use in soc_ops field function pointers */
 
 /**
- * _omap2xxx_wait_target_ready - wait for a module to leave slave idle
- * @oh: struct omap_hwmod *
- *
- * Wait for a module @oh to leave slave idle.  Returns 0 if the module
- * does not have an IDLEST bit or if the module successfully leaves
- * slave idle; otherwise, pass along the return value of the
- * appropriate *_cm*_wait_module_ready() function.
- */
-static int _omap2xxx_wait_target_ready(struct omap_hwmod *oh)
-{
-	if (!oh)
-		return -EINVAL;
-
-	if (oh->flags & HWMOD_NO_IDLEST)
-		return 0;
-
-	if (!_find_mpu_rt_port(oh))
-		return 0;
-
-	/* XXX check module SIDLEMODE, hardreset status, enabled clocks */
-
-	return omap2xxx_cm_wait_module_ready(oh->prcm.omap2.module_offs,
-					     oh->prcm.omap2.idlest_reg_id,
-					     oh->prcm.omap2.idlest_idle_bit);
-}
-
-/**
- * _omap3xxx_wait_target_ready - wait for a module to leave slave idle
+ * _omap2xxx_3xxx_wait_target_ready - wait for a module to leave slave idle
  * @oh: struct omap_hwmod *
  *
  * Wait for a module @oh to leave slave idle.  Returns 0 if the module
@@ -2962,7 +2871,7 @@ static int _omap2xxx_wait_target_ready(struct omap_hwmod *oh)
  * slave idle; otherwise, pass along the return value of the
  * appropriate *_cm*_wait_module_ready() function.
  */
-static int _omap3xxx_wait_target_ready(struct omap_hwmod *oh)
+static int _omap2xxx_3xxx_wait_target_ready(struct omap_hwmod *oh)
 {
 	if (!oh)
 		return -EINVAL;
@@ -2975,9 +2884,9 @@ static int _omap3xxx_wait_target_ready(struct omap_hwmod *oh)
 
 	/* XXX check module SIDLEMODE, hardreset status, enabled clocks */
 
-	return omap3xxx_cm_wait_module_ready(oh->prcm.omap2.module_offs,
-					     oh->prcm.omap2.idlest_reg_id,
-					     oh->prcm.omap2.idlest_idle_bit);
+	return omap_cm_wait_module_ready(0, oh->prcm.omap2.module_offs,
+					 oh->prcm.omap2.idlest_reg_id,
+					 oh->prcm.omap2.idlest_idle_bit);
 }
 
 /**
@@ -3002,37 +2911,9 @@ static int _omap4_wait_target_ready(struct omap_hwmod *oh)
 
 	/* XXX check module SIDLEMODE, hardreset status */
 
-	return omap4_cminst_wait_module_ready(oh->clkdm->prcm_partition,
-					      oh->clkdm->cm_inst,
-					      oh->clkdm->clkdm_offs,
-					      oh->prcm.omap4.clkctrl_offs);
-}
-
-/**
- * _am33xx_wait_target_ready - wait for a module to leave slave idle
- * @oh: struct omap_hwmod *
- *
- * Wait for a module @oh to leave slave idle.  Returns 0 if the module
- * does not have an IDLEST bit or if the module successfully leaves
- * slave idle; otherwise, pass along the return value of the
- * appropriate *_cm*_wait_module_ready() function.
- */
-static int _am33xx_wait_target_ready(struct omap_hwmod *oh)
-{
-	if (!oh || !oh->clkdm)
-		return -EINVAL;
-
-	if (oh->flags & HWMOD_NO_IDLEST)
-		return 0;
-
-	if (!_find_mpu_rt_port(oh))
-		return 0;
-
-	/* XXX check module SIDLEMODE, hardreset status */
-
-	return am33xx_cm_wait_module_ready(oh->clkdm->cm_inst,
-					      oh->clkdm->clkdm_offs,
-					      oh->prcm.omap4.clkctrl_offs);
+	return omap_cm_wait_module_ready(oh->clkdm->prcm_partition,
+					 oh->clkdm->cm_inst,
+					 oh->prcm.omap4.clkctrl_offs, 0);
 }
 
 /**
@@ -3049,8 +2930,8 @@ static int _am33xx_wait_target_ready(struct omap_hwmod *oh)
 static int _omap2_assert_hardreset(struct omap_hwmod *oh,
 				   struct omap_hwmod_rst_info *ohri)
 {
-	return omap2_prm_assert_hardreset(oh->prcm.omap2.module_offs,
-					  ohri->rst_shift);
+	return omap_prm_assert_hardreset(ohri->rst_shift, 0,
+					 oh->prcm.omap2.module_offs, 0);
 }
 
 /**
@@ -3067,9 +2948,8 @@ static int _omap2_assert_hardreset(struct omap_hwmod *oh,
 static int _omap2_deassert_hardreset(struct omap_hwmod *oh,
 				     struct omap_hwmod_rst_info *ohri)
 {
-	return omap2_prm_deassert_hardreset(oh->prcm.omap2.module_offs,
-					    ohri->rst_shift,
-					    ohri->st_shift);
+	return omap_prm_deassert_hardreset(ohri->rst_shift, ohri->st_shift, 0,
+					   oh->prcm.omap2.module_offs, 0, 0);
 }
 
 /**
@@ -3087,8 +2967,8 @@ static int _omap2_deassert_hardreset(struct omap_hwmod *oh,
 static int _omap2_is_hardreset_asserted(struct omap_hwmod *oh,
 					struct omap_hwmod_rst_info *ohri)
 {
-	return omap2_prm_is_hardreset_asserted(oh->prcm.omap2.module_offs,
-					       ohri->st_shift);
+	return omap_prm_is_hardreset_asserted(ohri->st_shift, 0,
+					      oh->prcm.omap2.module_offs, 0);
 }
 
 /**
@@ -3109,10 +2989,10 @@ static int _omap4_assert_hardreset(struct omap_hwmod *oh,
 	if (!oh->clkdm)
 		return -EINVAL;
 
-	return omap4_prminst_assert_hardreset(ohri->rst_shift,
-				oh->clkdm->pwrdm.ptr->prcm_partition,
-				oh->clkdm->pwrdm.ptr->prcm_offs,
-				oh->prcm.omap4.rstctrl_offs);
+	return omap_prm_assert_hardreset(ohri->rst_shift,
+					 oh->clkdm->pwrdm.ptr->prcm_partition,
+					 oh->clkdm->pwrdm.ptr->prcm_offs,
+					 oh->prcm.omap4.rstctrl_offs);
 }
 
 /**
@@ -3136,10 +3016,10 @@ static int _omap4_deassert_hardreset(struct omap_hwmod *oh,
 	if (ohri->st_shift)
 		pr_err("omap_hwmod: %s: %s: hwmod data error: OMAP4 does not support st_shift\n",
 		       oh->name, ohri->name);
-	return omap4_prminst_deassert_hardreset(ohri->rst_shift,
-				oh->clkdm->pwrdm.ptr->prcm_partition,
-				oh->clkdm->pwrdm.ptr->prcm_offs,
-				oh->prcm.omap4.rstctrl_offs);
+	return omap_prm_deassert_hardreset(ohri->rst_shift, 0,
+					   oh->clkdm->pwrdm.ptr->prcm_partition,
+					   oh->clkdm->pwrdm.ptr->prcm_offs,
+					   oh->prcm.omap4.rstctrl_offs, 0);
 }
 
 /**
@@ -3160,10 +3040,11 @@ static int _omap4_is_hardreset_asserted(struct omap_hwmod *oh,
 	if (!oh->clkdm)
 		return -EINVAL;
 
-	return omap4_prminst_is_hardreset_asserted(ohri->rst_shift,
-				oh->clkdm->pwrdm.ptr->prcm_partition,
-				oh->clkdm->pwrdm.ptr->prcm_offs,
-				oh->prcm.omap4.rstctrl_offs);
+	return omap_prm_is_hardreset_asserted(ohri->rst_shift,
+					      oh->clkdm->pwrdm.ptr->
+					      prcm_partition,
+					      oh->clkdm->pwrdm.ptr->prcm_offs,
+					      oh->prcm.omap4.rstctrl_offs);
 }
 
 /**
@@ -3182,9 +3063,9 @@ static int _am33xx_assert_hardreset(struct omap_hwmod *oh,
 				   struct omap_hwmod_rst_info *ohri)
 
 {
-	return am33xx_prm_assert_hardreset(ohri->rst_shift,
-				oh->clkdm->pwrdm.ptr->prcm_offs,
-				oh->prcm.omap4.rstctrl_offs);
+	return omap_prm_assert_hardreset(ohri->rst_shift, 0,
+					 oh->clkdm->pwrdm.ptr->prcm_offs,
+					 oh->prcm.omap4.rstctrl_offs);
 }
 
 /**
@@ -3202,11 +3083,10 @@ static int _am33xx_assert_hardreset(struct omap_hwmod *oh,
 static int _am33xx_deassert_hardreset(struct omap_hwmod *oh,
 				     struct omap_hwmod_rst_info *ohri)
 {
-	return am33xx_prm_deassert_hardreset(ohri->rst_shift,
-				ohri->st_shift,
-				oh->clkdm->pwrdm.ptr->prcm_offs,
-				oh->prcm.omap4.rstctrl_offs,
-				oh->prcm.omap4.rstst_offs);
+	return omap_prm_deassert_hardreset(ohri->rst_shift, ohri->st_shift, 0,
+					   oh->clkdm->pwrdm.ptr->prcm_offs,
+					   oh->prcm.omap4.rstctrl_offs,
+					   oh->prcm.omap4.rstst_offs);
 }
 
 /**
@@ -3224,9 +3104,9 @@ static int _am33xx_deassert_hardreset(struct omap_hwmod *oh,
 static int _am33xx_is_hardreset_asserted(struct omap_hwmod *oh,
 					struct omap_hwmod_rst_info *ohri)
 {
-	return am33xx_prm_is_hardreset_asserted(ohri->rst_shift,
-				oh->clkdm->pwrdm.ptr->prcm_offs,
-				oh->prcm.omap4.rstctrl_offs);
+	return omap_prm_is_hardreset_asserted(ohri->rst_shift, 0,
+					      oh->clkdm->pwrdm.ptr->prcm_offs,
+					      oh->prcm.omap4.rstctrl_offs);
 }
 
 /* Public functions */
@@ -4234,12 +4114,12 @@ int omap_hwmod_pad_route_irq(struct omap_hwmod *oh, int pad_idx, int irq_idx)
 void __init omap_hwmod_init(void)
 {
 	if (cpu_is_omap24xx()) {
-		soc_ops.wait_target_ready = _omap2xxx_wait_target_ready;
+		soc_ops.wait_target_ready = _omap2xxx_3xxx_wait_target_ready;
 		soc_ops.assert_hardreset = _omap2_assert_hardreset;
 		soc_ops.deassert_hardreset = _omap2_deassert_hardreset;
 		soc_ops.is_hardreset_asserted = _omap2_is_hardreset_asserted;
 	} else if (cpu_is_omap34xx()) {
-		soc_ops.wait_target_ready = _omap3xxx_wait_target_ready;
+		soc_ops.wait_target_ready = _omap2xxx_3xxx_wait_target_ready;
 		soc_ops.assert_hardreset = _omap2_assert_hardreset;
 		soc_ops.deassert_hardreset = _omap2_deassert_hardreset;
 		soc_ops.is_hardreset_asserted = _omap2_is_hardreset_asserted;
@@ -4258,14 +4138,14 @@ void __init omap_hwmod_init(void)
 		soc_ops.enable_module = _omap4_enable_module;
 		soc_ops.disable_module = _omap4_disable_module;
 		soc_ops.wait_target_ready = _omap4_wait_target_ready;
-		soc_ops.assert_hardreset = _am33xx_assert_hardreset;
-		soc_ops.deassert_hardreset = _am33xx_deassert_hardreset;
-		soc_ops.is_hardreset_asserted = _am33xx_is_hardreset_asserted;
+		soc_ops.assert_hardreset = _omap4_assert_hardreset;
+		soc_ops.deassert_hardreset = _omap4_deassert_hardreset;
+		soc_ops.is_hardreset_asserted = _omap4_is_hardreset_asserted;
 		soc_ops.init_clkdm = _init_clkdm;
 	} else if (soc_is_am33xx()) {
-		soc_ops.enable_module = _am33xx_enable_module;
-		soc_ops.disable_module = _am33xx_disable_module;
-		soc_ops.wait_target_ready = _am33xx_wait_target_ready;
+		soc_ops.enable_module = _omap4_enable_module;
+		soc_ops.disable_module = _omap4_disable_module;
+		soc_ops.wait_target_ready = _omap4_wait_target_ready;
 		soc_ops.assert_hardreset = _am33xx_assert_hardreset;
 		soc_ops.deassert_hardreset = _am33xx_deassert_hardreset;
 		soc_ops.is_hardreset_asserted = _am33xx_is_hardreset_asserted;
diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h
index 512f809..35ca6ef 100644
--- a/arch/arm/mach-omap2/omap_hwmod.h
+++ b/arch/arm/mach-omap2/omap_hwmod.h
@@ -633,6 +633,7 @@ struct omap_hwmod_link {
  * @flags: hwmod flags (documented below)
  * @_lock: spinlock serializing operations on this hwmod
  * @node: list node for hwmod list (internal use)
+ * @parent_hwmod: (temporary) a pointer to the hierarchical parent of this hwmod
  *
  * @main_clk refers to this module's "main clock," which for our
  * purposes is defined as "the functional clock needed for register
@@ -643,6 +644,12 @@ struct omap_hwmod_link {
  * the omap_hwmod code and should not be set during initialization.
  *
  * @masters and @slaves are now deprecated.
+ *
+ * @parent_hwmod is temporary; there should be no need for it, as this
+ * information should already be expressed in the OCP interface
+ * structures.  @parent_hwmod is present as a workaround until we improve
+ * handling for hwmods with multiple parents (e.g., OMAP4+ DSS with
+ * multiple register targets across different interconnects).
  */
 struct omap_hwmod {
 	const char			*name;
@@ -680,6 +687,7 @@ struct omap_hwmod {
 	u8				_int_flags;
 	u8				_state;
 	u8				_postsetup_state;
+	struct omap_hwmod		*parent_hwmod;
 };
 
 struct omap_hwmod *omap_hwmod_lookup(const char *name);
diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
index fea01aa..5c6c841 100644
--- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
@@ -417,6 +417,37 @@ static struct omap_hwmod am43xx_qspi_hwmod = {
 	},
 };
 
+/*
+ * 'adc/tsc' class
+ * TouchScreen Controller (Analog-To-Digital Converter)
+ */
+static struct omap_hwmod_class_sysconfig am43xx_adc_tsc_sysc = {
+	.rev_offs	= 0x00,
+	.sysc_offs	= 0x10,
+	.sysc_flags	= SYSC_HAS_SIDLEMODE,
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			  SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class am43xx_adc_tsc_hwmod_class = {
+	.name		= "adc_tsc",
+	.sysc		= &am43xx_adc_tsc_sysc,
+};
+
+static struct omap_hwmod am43xx_adc_tsc_hwmod = {
+	.name		= "adc_tsc",
+	.class		= &am43xx_adc_tsc_hwmod_class,
+	.clkdm_name	= "l3s_tsc_clkdm",
+	.main_clk	= "adc_tsc_fck",
+	.prcm		= {
+		.omap4  = {
+			.clkctrl_offs   = AM43XX_CM_WKUP_ADC_TSC_CLKCTRL_OFFSET,
+			.modulemode     = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
 /* dss */
 
 static struct omap_hwmod am43xx_dss_core_hwmod = {
@@ -547,6 +578,13 @@ static struct omap_hwmod_ocp_if am43xx_l4_wkup__gpio0 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+static struct omap_hwmod_ocp_if am43xx_l4_wkup__adc_tsc = {
+	.master         = &am33xx_l4_wkup_hwmod,
+	.slave          = &am43xx_adc_tsc_hwmod,
+	.clk            = "dpll_core_m4_div2_ck",
+	.user           = OCP_USER_MPU,
+};
+
 static struct omap_hwmod_ocp_if am43xx_l4_hs__cpgmac0 = {
 	.master		= &am43xx_l4_hs_hwmod,
 	.slave		= &am33xx_cpgmac0_hwmod,
@@ -789,6 +827,7 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
 	&am43xx_l4_wkup__i2c1,
 	&am43xx_l4_wkup__gpio0,
 	&am43xx_l4_wkup__wd_timer1,
+	&am43xx_l4_wkup__adc_tsc,
 	&am43xx_l3_s__qspi,
 	&am33xx_l4_per__dcan0,
 	&am33xx_l4_per__dcan1,
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index d8a3cf1..c314b3c 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -589,6 +589,7 @@ static struct omap_hwmod omap44xx_dss_hwmod = {
 		.omap4 = {
 			.clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET,
 			.context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
 		},
 	},
 	.opt_clks	= dss_opt_clks,
@@ -647,7 +648,8 @@ static struct omap_hwmod omap44xx_dss_dispc_hwmod = {
 			.context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET,
 		},
 	},
-	.dev_attr	= &omap44xx_dss_dispc_dev_attr
+	.dev_attr	= &omap44xx_dss_dispc_dev_attr,
+	.parent_hwmod	= &omap44xx_dss_hwmod,
 };
 
 /*
@@ -701,6 +703,7 @@ static struct omap_hwmod omap44xx_dss_dsi1_hwmod = {
 	},
 	.opt_clks	= dss_dsi1_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(dss_dsi1_opt_clks),
+	.parent_hwmod	= &omap44xx_dss_hwmod,
 };
 
 /* dss_dsi2 */
@@ -733,6 +736,7 @@ static struct omap_hwmod omap44xx_dss_dsi2_hwmod = {
 	},
 	.opt_clks	= dss_dsi2_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(dss_dsi2_opt_clks),
+	.parent_hwmod	= &omap44xx_dss_hwmod,
 };
 
 /*
@@ -790,6 +794,7 @@ static struct omap_hwmod omap44xx_dss_hdmi_hwmod = {
 	},
 	.opt_clks	= dss_hdmi_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(dss_hdmi_opt_clks),
+	.parent_hwmod	= &omap44xx_dss_hwmod,
 };
 
 /*
@@ -819,7 +824,7 @@ static struct omap_hwmod_dma_info omap44xx_dss_rfbi_sdma_reqs[] = {
 };
 
 static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = {
-	{ .role = "ick", .clk = "dss_fck" },
+	{ .role = "ick", .clk = "l3_div_ck" },
 };
 
 static struct omap_hwmod omap44xx_dss_rfbi_hwmod = {
@@ -836,6 +841,7 @@ static struct omap_hwmod omap44xx_dss_rfbi_hwmod = {
 	},
 	.opt_clks	= dss_rfbi_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(dss_rfbi_opt_clks),
+	.parent_hwmod	= &omap44xx_dss_hwmod,
 };
 
 /*
@@ -859,6 +865,7 @@ static struct omap_hwmod omap44xx_dss_venc_hwmod = {
 			.context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET,
 		},
 	},
+	.parent_hwmod	= &omap44xx_dss_hwmod,
 };
 
 /*
@@ -3671,7 +3678,7 @@ static struct omap_hwmod_addr_space omap44xx_dss_dma_addrs[] = {
 static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss = {
 	.master		= &omap44xx_l3_main_2_hwmod,
 	.slave		= &omap44xx_dss_hwmod,
-	.clk		= "dss_fck",
+	.clk		= "l3_div_ck",
 	.addr		= omap44xx_dss_dma_addrs,
 	.user		= OCP_USER_SDMA,
 };
@@ -3707,7 +3714,7 @@ static struct omap_hwmod_addr_space omap44xx_dss_dispc_dma_addrs[] = {
 static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dispc = {
 	.master		= &omap44xx_l3_main_2_hwmod,
 	.slave		= &omap44xx_dss_dispc_hwmod,
-	.clk		= "dss_fck",
+	.clk		= "l3_div_ck",
 	.addr		= omap44xx_dss_dispc_dma_addrs,
 	.user		= OCP_USER_SDMA,
 };
@@ -3743,7 +3750,7 @@ static struct omap_hwmod_addr_space omap44xx_dss_dsi1_dma_addrs[] = {
 static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dsi1 = {
 	.master		= &omap44xx_l3_main_2_hwmod,
 	.slave		= &omap44xx_dss_dsi1_hwmod,
-	.clk		= "dss_fck",
+	.clk		= "l3_div_ck",
 	.addr		= omap44xx_dss_dsi1_dma_addrs,
 	.user		= OCP_USER_SDMA,
 };
@@ -3779,7 +3786,7 @@ static struct omap_hwmod_addr_space omap44xx_dss_dsi2_dma_addrs[] = {
 static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dsi2 = {
 	.master		= &omap44xx_l3_main_2_hwmod,
 	.slave		= &omap44xx_dss_dsi2_hwmod,
-	.clk		= "dss_fck",
+	.clk		= "l3_div_ck",
 	.addr		= omap44xx_dss_dsi2_dma_addrs,
 	.user		= OCP_USER_SDMA,
 };
@@ -3815,7 +3822,7 @@ static struct omap_hwmod_addr_space omap44xx_dss_hdmi_dma_addrs[] = {
 static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_hdmi = {
 	.master		= &omap44xx_l3_main_2_hwmod,
 	.slave		= &omap44xx_dss_hdmi_hwmod,
-	.clk		= "dss_fck",
+	.clk		= "l3_div_ck",
 	.addr		= omap44xx_dss_hdmi_dma_addrs,
 	.user		= OCP_USER_SDMA,
 };
@@ -3851,7 +3858,7 @@ static struct omap_hwmod_addr_space omap44xx_dss_rfbi_dma_addrs[] = {
 static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_rfbi = {
 	.master		= &omap44xx_l3_main_2_hwmod,
 	.slave		= &omap44xx_dss_rfbi_hwmod,
-	.clk		= "dss_fck",
+	.clk		= "l3_div_ck",
 	.addr		= omap44xx_dss_rfbi_dma_addrs,
 	.user		= OCP_USER_SDMA,
 };
@@ -3887,7 +3894,7 @@ static struct omap_hwmod_addr_space omap44xx_dss_venc_dma_addrs[] = {
 static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_venc = {
 	.master		= &omap44xx_l3_main_2_hwmod,
 	.slave		= &omap44xx_dss_venc_hwmod,
-	.clk		= "dss_fck",
+	.clk		= "l3_div_ck",
 	.addr		= omap44xx_dss_venc_dma_addrs,
 	.user		= OCP_USER_SDMA,
 };
diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
index 5ec786a..3e95230 100644
--- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
@@ -421,6 +421,7 @@ static struct omap_hwmod omap54xx_dss_dispc_hwmod = {
 	.opt_clks	= dss_dispc_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(dss_dispc_opt_clks),
 	.dev_attr	= &dss_dispc_dev_attr,
+	.parent_hwmod	= &omap54xx_dss_hwmod,
 };
 
 /*
@@ -462,6 +463,7 @@ static struct omap_hwmod omap54xx_dss_dsi1_a_hwmod = {
 	},
 	.opt_clks	= dss_dsi1_a_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(dss_dsi1_a_opt_clks),
+	.parent_hwmod	= &omap54xx_dss_hwmod,
 };
 
 /* dss_dsi1_c */
@@ -482,6 +484,7 @@ static struct omap_hwmod omap54xx_dss_dsi1_c_hwmod = {
 	},
 	.opt_clks	= dss_dsi1_c_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(dss_dsi1_c_opt_clks),
+	.parent_hwmod	= &omap54xx_dss_hwmod,
 };
 
 /*
@@ -521,6 +524,7 @@ static struct omap_hwmod omap54xx_dss_hdmi_hwmod = {
 	},
 	.opt_clks	= dss_hdmi_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(dss_hdmi_opt_clks),
+	.parent_hwmod	= &omap54xx_dss_hwmod,
 };
 
 /*
@@ -560,6 +564,7 @@ static struct omap_hwmod omap54xx_dss_rfbi_hwmod = {
 	},
 	.opt_clks	= dss_rfbi_opt_clks,
 	.opt_clks_cnt	= ARRAY_SIZE(dss_rfbi_opt_clks),
+	.parent_hwmod	= &omap54xx_dss_hwmod,
 };
 
 /*
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index 711c97e..ffd6604 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -2075,6 +2075,70 @@ static struct omap_hwmod dra7xx_uart6_hwmod = {
 	},
 };
 
+/* uart7 */
+static struct omap_hwmod dra7xx_uart7_hwmod = {
+	.name		= "uart7",
+	.class		= &dra7xx_uart_hwmod_class,
+	.clkdm_name	= "l4per2_clkdm",
+	.main_clk	= "uart7_gfclk_mux",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER2_UART7_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER2_UART7_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* uart8 */
+static struct omap_hwmod dra7xx_uart8_hwmod = {
+	.name		= "uart8",
+	.class		= &dra7xx_uart_hwmod_class,
+	.clkdm_name	= "l4per2_clkdm",
+	.main_clk	= "uart8_gfclk_mux",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER2_UART8_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER2_UART8_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* uart9 */
+static struct omap_hwmod dra7xx_uart9_hwmod = {
+	.name		= "uart9",
+	.class		= &dra7xx_uart_hwmod_class,
+	.clkdm_name	= "l4per2_clkdm",
+	.main_clk	= "uart9_gfclk_mux",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER2_UART9_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER2_UART9_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+/* uart10 */
+static struct omap_hwmod dra7xx_uart10_hwmod = {
+	.name		= "uart10",
+	.class		= &dra7xx_uart_hwmod_class,
+	.clkdm_name	= "wkupaon_clkdm",
+	.main_clk	= "uart10_gfclk_mux",
+	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_WKUPAON_UART10_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_WKUPAON_UART10_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
 /*
  * 'usb_otg_ss' class
  *
@@ -3095,6 +3159,38 @@ static struct omap_hwmod_ocp_if dra7xx_l4_per1__uart6 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+/* l4_per2 -> uart7 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per2__uart7 = {
+	.master		= &dra7xx_l4_per2_hwmod,
+	.slave		= &dra7xx_uart7_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per2 -> uart8 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per2__uart8 = {
+	.master		= &dra7xx_l4_per2_hwmod,
+	.slave		= &dra7xx_uart8_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per2 -> uart9 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per2__uart9 = {
+	.master		= &dra7xx_l4_per2_hwmod,
+	.slave		= &dra7xx_uart9_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_wkup -> uart10 */
+static struct omap_hwmod_ocp_if dra7xx_l4_wkup__uart10 = {
+	.master		= &dra7xx_l4_wkup_hwmod,
+	.slave		= &dra7xx_uart10_hwmod,
+	.clk		= "wkupaon_iclk_mux",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
 /* l4_per3 -> usb_otg_ss1 */
 static struct omap_hwmod_ocp_if dra7xx_l4_per3__usb_otg_ss1 = {
 	.master		= &dra7xx_l4_per3_hwmod,
@@ -3259,6 +3355,10 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
 	&dra7xx_l4_per1__uart4,
 	&dra7xx_l4_per1__uart5,
 	&dra7xx_l4_per1__uart6,
+	&dra7xx_l4_per2__uart7,
+	&dra7xx_l4_per2__uart8,
+	&dra7xx_l4_per2__uart9,
+	&dra7xx_l4_wkup__uart10,
 	&dra7xx_l4_per3__usb_otg_ss1,
 	&dra7xx_l4_per3__usb_otg_ss2,
 	&dra7xx_l4_per3__usb_otg_ss3,
diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c
index 503097c..d697cec 100644
--- a/arch/arm/mach-omap2/pm44xx.c
+++ b/arch/arm/mach-omap2/pm44xx.c
@@ -37,6 +37,16 @@ struct power_state {
 	struct list_head node;
 };
 
+/**
+ * struct static_dep_map - Static dependency map
+ * @from:	from clockdomain
+ * @to:		to clockdomain
+  */
+struct static_dep_map {
+	const char *from;
+	const char *to;
+};
+
 static u32 cpu_suspend_state = PWRDM_POWER_OFF;
 
 static LIST_HEAD(pwrst_list);
@@ -148,94 +158,61 @@ static void omap_default_idle(void)
 	omap_do_wfi();
 }
 
-/**
- * omap4_init_static_deps - Add OMAP4 static dependencies
- *
- * Add needed static clockdomain dependencies on OMAP4 devices.
- * Return: 0 on success or 'err' on failures
+/*
+ * The dynamic dependency between MPUSS -> MEMIF and
+ * MPUSS -> L4_PER/L3_* and DUCATI -> L3_* doesn't work as
+ * expected. The hardware recommendation is to enable static
+ * dependencies for these to avoid system lock ups or random crashes.
+ * The L4 wakeup depedency is added to workaround the OCP sync hardware
+ * BUG with 32K synctimer which lead to incorrect timer value read
+ * from the 32K counter. The BUG applies for GPTIMER1 and WDT2 which
+ * are part of L4 wakeup clockdomain.
  */
-static inline int omap4_init_static_deps(void)
-{
-	struct clockdomain *emif_clkdm, *mpuss_clkdm, *l3_1_clkdm;
-	struct clockdomain *ducati_clkdm, *l3_2_clkdm;
-	int ret = 0;
-
-	if (omap_rev() == OMAP4430_REV_ES1_0) {
-		WARN(1, "Power Management not supported on OMAP4430 ES1.0\n");
-		return -ENODEV;
-	}
-
-	pr_err("Power Management for TI OMAP4.\n");
-	/*
-	 * OMAP4 chip PM currently works only with certain (newer)
-	 * versions of bootloaders. This is due to missing code in the
-	 * kernel to properly reset and initialize some devices.
-	 * http://www.spinics.net/lists/arm-kernel/msg218641.html
-	 */
-	pr_warn("OMAP4 PM: u-boot >= v2012.07 is required for full PM support\n");
-
-	ret = pwrdm_for_each(pwrdms_setup, NULL);
-	if (ret) {
-		pr_err("Failed to setup powerdomains\n");
-		return ret;
-	}
-
-	/*
-	 * The dynamic dependency between MPUSS -> MEMIF and
-	 * MPUSS -> L4_PER/L3_* and DUCATI -> L3_* doesn't work as
-	 * expected. The hardware recommendation is to enable static
-	 * dependencies for these to avoid system lock ups or random crashes.
-	 * The L4 wakeup depedency is added to workaround the OCP sync hardware
-	 * BUG with 32K synctimer which lead to incorrect timer value read
-	 * from the 32K counter. The BUG applies for GPTIMER1 and WDT2 which
-	 * are part of L4 wakeup clockdomain.
-	 */
-	mpuss_clkdm = clkdm_lookup("mpuss_clkdm");
-	emif_clkdm = clkdm_lookup("l3_emif_clkdm");
-	l3_1_clkdm = clkdm_lookup("l3_1_clkdm");
-	l3_2_clkdm = clkdm_lookup("l3_2_clkdm");
-	ducati_clkdm = clkdm_lookup("ducati_clkdm");
-	if ((!mpuss_clkdm) || (!emif_clkdm) || (!l3_1_clkdm) ||
-		(!l3_2_clkdm) || (!ducati_clkdm))
-		return -EINVAL;
-
-	ret = clkdm_add_wkdep(mpuss_clkdm, emif_clkdm);
-	ret |= clkdm_add_wkdep(mpuss_clkdm, l3_1_clkdm);
-	ret |= clkdm_add_wkdep(mpuss_clkdm, l3_2_clkdm);
-	ret |= clkdm_add_wkdep(ducati_clkdm, l3_1_clkdm);
-	ret |= clkdm_add_wkdep(ducati_clkdm, l3_2_clkdm);
-	if (ret) {
-		pr_err("Failed to add MPUSS -> L3/EMIF/L4PER, DUCATI -> L3 wakeup dependency\n");
-		return -EINVAL;
-	}
+static const struct static_dep_map omap4_static_dep_map[] = {
+	{.from = "mpuss_clkdm", .to = "l3_emif_clkdm"},
+	{.from = "mpuss_clkdm", .to = "l3_1_clkdm"},
+	{.from = "mpuss_clkdm", .to = "l3_2_clkdm"},
+	{.from = "ducati_clkdm", .to = "l3_1_clkdm"},
+	{.from = "ducati_clkdm", .to = "l3_2_clkdm"},
+	{.from  = NULL} /* TERMINATION */
+};
 
-	return ret;
-}
+static const struct static_dep_map omap5_dra7_static_dep_map[] = {
+	{.from = "mpu_clkdm", .to = "emif_clkdm"},
+	{.from  = NULL} /* TERMINATION */
+};
 
 /**
- * omap5_dra7_init_static_deps - Init static clkdm dependencies on OMAP5 and
- *				 DRA7
- *
- * The dynamic dependency between MPUSS -> EMIF is broken and has
- * not worked as expected. The hardware recommendation is to
- * enable static dependencies for these to avoid system
- * lock ups or random crashes.
+ * omap4plus_init_static_deps() - Initialize a static dependency map
+ * @map:	Mapping of clock domains
  */
-static inline int omap5_dra7_init_static_deps(void)
+static inline int omap4plus_init_static_deps(const struct static_dep_map *map)
 {
-	struct clockdomain *mpuss_clkdm, *emif_clkdm;
 	int ret;
+	struct clockdomain *from, *to;
+
+	if (!map)
+		return 0;
 
-	mpuss_clkdm = clkdm_lookup("mpu_clkdm");
-	emif_clkdm = clkdm_lookup("emif_clkdm");
-	if (!mpuss_clkdm || !emif_clkdm)
-		return -EINVAL;
+	while (map->from) {
+		from = clkdm_lookup(map->from);
+		to = clkdm_lookup(map->to);
+		if (!from || !to) {
+			pr_err("Failed lookup %s or %s for wakeup dependency\n",
+			       map->from, map->to);
+			return -EINVAL;
+		}
+		ret = clkdm_add_wkdep(from, to);
+		if (ret) {
+			pr_err("Failed to add %s -> %s wakeup dependency(%d)\n",
+			       map->from, map->to, ret);
+			return ret;
+		}
 
-	ret = clkdm_add_wkdep(mpuss_clkdm, emif_clkdm);
-	if (ret)
-		pr_err("Failed to add MPUSS -> EMIF wakeup dependency\n");
+		map++;
+	};
 
-	return ret;
+	return 0;
 }
 
 /**
@@ -272,6 +249,15 @@ int __init omap4_pm_init(void)
 
 	pr_info("Power Management for TI OMAP4+ devices.\n");
 
+	/*
+	 * OMAP4 chip PM currently works only with certain (newer)
+	 * versions of bootloaders. This is due to missing code in the
+	 * kernel to properly reset and initialize some devices.
+	 * http://www.spinics.net/lists/arm-kernel/msg218641.html
+	 */
+	if (cpu_is_omap44xx())
+		pr_warn("OMAP4 PM: u-boot >= v2012.07 is required for full PM support\n");
+
 	ret = pwrdm_for_each(pwrdms_setup, NULL);
 	if (ret) {
 		pr_err("Failed to setup powerdomains.\n");
@@ -279,9 +265,9 @@ int __init omap4_pm_init(void)
 	}
 
 	if (cpu_is_omap44xx())
-		ret = omap4_init_static_deps();
+		ret = omap4plus_init_static_deps(omap4_static_dep_map);
 	else if (soc_is_omap54xx() || soc_is_dra7xx())
-		ret = omap5_dra7_init_static_deps();
+		ret = omap4plus_init_static_deps(omap5_dra7_static_dep_map);
 
 	if (ret) {
 		pr_err("Failed to initialise static dependencies.\n");
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index 48480d5..77752e4 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -29,6 +29,7 @@ int of_prcm_init(void);
  * PRM_HAS_VOLTAGE: has voltage domains
  */
 #define PRM_HAS_IO_WAKEUP	(1 << 0)
+#define PRM_HAS_VOLTAGE		(1 << 1)
 
 /*
  * MAX_MODULE_SOFTRESET_WAIT: Maximum microseconds to wait for OMAP
@@ -127,6 +128,8 @@ struct prm_reset_src_map {
  * @was_any_context_lost_old: ptr to the SoC PRM context loss test fn
  * @clear_context_loss_flags_old: ptr to the SoC PRM context loss flag clear fn
  * @late_init: ptr to the late init function
+ * @assert_hardreset: ptr to the SoC PRM hardreset assert impl
+ * @deassert_hardreset: ptr to the SoC PRM hardreset deassert impl
  *
  * XXX @was_any_context_lost_old and @clear_context_loss_flags_old are
  * deprecated.
@@ -136,14 +139,27 @@ struct prm_ll_data {
 	bool (*was_any_context_lost_old)(u8 part, s16 inst, u16 idx);
 	void (*clear_context_loss_flags_old)(u8 part, s16 inst, u16 idx);
 	int (*late_init)(void);
+	int (*assert_hardreset)(u8 shift, u8 part, s16 prm_mod, u16 offset);
+	int (*deassert_hardreset)(u8 shift, u8 st_shift, u8 part, s16 prm_mod,
+				  u16 offset, u16 st_offset);
+	int (*is_hardreset_asserted)(u8 shift, u8 part, s16 prm_mod,
+				     u16 offset);
+	void (*reset_system)(void);
 };
 
 extern int prm_register(struct prm_ll_data *pld);
 extern int prm_unregister(struct prm_ll_data *pld);
 
+int omap_prm_assert_hardreset(u8 shift, u8 part, s16 prm_mod, u16 offset);
+int omap_prm_deassert_hardreset(u8 shift, u8 st_shift, u8 part, s16 prm_mod,
+				u16 offset, u16 st_offset);
+int omap_prm_is_hardreset_asserted(u8 shift, u8 part, s16 prm_mod, u16 offset);
 extern u32 prm_read_reset_sources(void);
 extern bool prm_was_any_context_lost_old(u8 part, s16 inst, u16 idx);
 extern void prm_clear_context_loss_flags_old(u8 part, s16 inst, u16 idx);
+void omap_prm_reset_system(void);
+
+void omap_prm_reconfigure_io_chain(void);
 
 #endif
 
diff --git a/arch/arm/mach-omap2/prm2xxx.c b/arch/arm/mach-omap2/prm2xxx.c
index 8695805..af0f152 100644
--- a/arch/arm/mach-omap2/prm2xxx.c
+++ b/arch/arm/mach-omap2/prm2xxx.c
@@ -106,7 +106,7 @@ static int omap2xxx_pwrst_to_common_pwrst(u8 omap2xxx_pwrst)
  * Set the DPLL reset bit, which should reboot the SoC.  This is the
  * recommended way to restart the SoC.  No return value.
  */
-void omap2xxx_prm_dpll_reset(void)
+static void omap2xxx_prm_dpll_reset(void)
 {
 	omap2_prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, WKUP_MOD,
 				   OMAP2_RM_RSTCTRL);
@@ -212,6 +212,10 @@ struct pwrdm_ops omap2_pwrdm_operations = {
 
 static struct prm_ll_data omap2xxx_prm_ll_data = {
 	.read_reset_sources = &omap2xxx_prm_read_reset_sources,
+	.assert_hardreset = &omap2_prm_assert_hardreset,
+	.deassert_hardreset = &omap2_prm_deassert_hardreset,
+	.is_hardreset_asserted = &omap2_prm_is_hardreset_asserted,
+	.reset_system = &omap2xxx_prm_dpll_reset,
 };
 
 int __init omap2xxx_prm_init(void)
diff --git a/arch/arm/mach-omap2/prm2xxx.h b/arch/arm/mach-omap2/prm2xxx.h
index d734141..1d51643 100644
--- a/arch/arm/mach-omap2/prm2xxx.h
+++ b/arch/arm/mach-omap2/prm2xxx.h
@@ -124,7 +124,6 @@
 extern int omap2xxx_clkdm_sleep(struct clockdomain *clkdm);
 extern int omap2xxx_clkdm_wakeup(struct clockdomain *clkdm);
 
-extern void omap2xxx_prm_dpll_reset(void);
 void omap2xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask);
 
 extern int __init omap2xxx_prm_init(void);
diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c
index c13b4e2..cc3341f 100644
--- a/arch/arm/mach-omap2/prm2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c
@@ -24,14 +24,16 @@
 /**
  * omap2_prm_is_hardreset_asserted - read the HW reset line state of
  * submodules contained in the hwmod module
- * @prm_mod: PRM submodule base (e.g. CORE_MOD)
  * @shift: register bit shift corresponding to the reset line to check
+ * @part: PRM partition, ignored for OMAP2
+ * @prm_mod: PRM submodule base (e.g. CORE_MOD)
+ * @offset: register offset, ignored for OMAP2
  *
  * Returns 1 if the (sub)module hardreset line is currently asserted,
  * 0 if the (sub)module hardreset line is not currently asserted, or
  * -EINVAL if called while running on a non-OMAP2/3 chip.
  */
-int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift)
+int omap2_prm_is_hardreset_asserted(u8 shift, u8 part, s16 prm_mod, u16 offset)
 {
 	return omap2_prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTCTRL,
 				       (1 << shift));
@@ -39,8 +41,10 @@ int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift)
 
 /**
  * omap2_prm_assert_hardreset - assert the HW reset line of a submodule
- * @prm_mod: PRM submodule base (e.g. CORE_MOD)
  * @shift: register bit shift corresponding to the reset line to assert
+ * @part: PRM partition, ignored for OMAP2
+ * @prm_mod: PRM submodule base (e.g. CORE_MOD)
+ * @offset: register offset, ignored for OMAP2
  *
  * Some IPs like dsp or iva contain processors that require an HW
  * reset line to be asserted / deasserted in order to fully enable the
@@ -49,7 +53,7 @@ int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift)
  * place the submodule into reset.  Returns 0 upon success or -EINVAL
  * upon an argument error.
  */
-int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift)
+int omap2_prm_assert_hardreset(u8 shift, u8 part, s16 prm_mod, u16 offset)
 {
 	u32 mask;
 
@@ -64,6 +68,10 @@ int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift)
  * @prm_mod: PRM submodule base (e.g. CORE_MOD)
  * @rst_shift: register bit shift corresponding to the reset line to deassert
  * @st_shift: register bit shift for the status of the deasserted submodule
+ * @part: PRM partition, not used for OMAP2
+ * @prm_mod: PRM submodule base (e.g. CORE_MOD)
+ * @rst_offset: reset register offset, not used for OMAP2
+ * @st_offset: reset status register offset, not used for OMAP2
  *
  * Some IPs like dsp or iva contain processors that require an HW
  * reset line to be asserted / deasserted in order to fully enable the
@@ -74,7 +82,8 @@ int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift)
  * -EINVAL upon an argument error, -EEXIST if the submodule was already out
  * of reset, or -EBUSY if the submodule did not exit reset promptly.
  */
-int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, u8 st_shift)
+int omap2_prm_deassert_hardreset(u8 rst_shift, u8 st_shift, u8 part,
+				 s16 prm_mod, u16 rst_offset, u16 st_offset)
 {
 	u32 rst, st;
 	int c;
diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.h b/arch/arm/mach-omap2/prm2xxx_3xxx.h
index 1a3a963..f57e29b 100644
--- a/arch/arm/mach-omap2/prm2xxx_3xxx.h
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.h
@@ -100,9 +100,12 @@ static inline u32 omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
 }
 
 /* These omap2_ PRM functions apply to both OMAP2 and 3 */
-extern int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift);
-extern int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift);
-extern int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, u8 st_shift);
+int omap2_prm_is_hardreset_asserted(u8 shift, u8 part, s16 prm_mod, u16 offset);
+int omap2_prm_assert_hardreset(u8 shift, u8 part, s16 prm_mod,
+			       u16 offset);
+int omap2_prm_deassert_hardreset(u8 rst_shift, u8 st_shift, u8 part,
+				 s16 prm_mod, u16 reset_offset,
+				 u16 st_offset);
 
 extern int omap2_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst);
 extern int omap2_pwrdm_read_next_pwrst(struct powerdomain *pwrdm);
diff --git a/arch/arm/mach-omap2/prm33xx.c b/arch/arm/mach-omap2/prm33xx.c
index 62709cd..02f62860 100644
--- a/arch/arm/mach-omap2/prm33xx.c
+++ b/arch/arm/mach-omap2/prm33xx.c
@@ -23,20 +23,24 @@
 #include "prm33xx.h"
 #include "prm-regbits-33xx.h"
 
+#define AM33XX_PRM_RSTCTRL_OFFSET		0x0000
+
+#define AM33XX_RST_GLOBAL_WARM_SW_MASK		(1 << 0)
+
 /* Read a register in a PRM instance */
-u32 am33xx_prm_read_reg(s16 inst, u16 idx)
+static u32 am33xx_prm_read_reg(s16 inst, u16 idx)
 {
 	return readl_relaxed(prm_base + inst + idx);
 }
 
 /* Write into a register in a PRM instance */
-void am33xx_prm_write_reg(u32 val, s16 inst, u16 idx)
+static void am33xx_prm_write_reg(u32 val, s16 inst, u16 idx)
 {
 	writel_relaxed(val, prm_base + inst + idx);
 }
 
 /* Read-modify-write a register in PRM. Caller must lock */
-u32 am33xx_prm_rmw_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx)
+static u32 am33xx_prm_rmw_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx)
 {
 	u32 v;
 
@@ -52,6 +56,7 @@ u32 am33xx_prm_rmw_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx)
  * am33xx_prm_is_hardreset_asserted - read the HW reset line state of
  * submodules contained in the hwmod module
  * @shift: register bit shift corresponding to the reset line to check
+ * @part: PRM partition, ignored for AM33xx
  * @inst: CM instance register offset (*_INST macro)
  * @rstctrl_offs: RM_RSTCTRL register address offset for this module
  *
@@ -59,7 +64,8 @@ u32 am33xx_prm_rmw_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx)
  * 0 if the (sub)module hardreset line is not currently asserted, or
  * -EINVAL upon parameter error.
  */
-int am33xx_prm_is_hardreset_asserted(u8 shift, s16 inst, u16 rstctrl_offs)
+static int am33xx_prm_is_hardreset_asserted(u8 shift, u8 part, s16 inst,
+					    u16 rstctrl_offs)
 {
 	u32 v;
 
@@ -73,6 +79,7 @@ int am33xx_prm_is_hardreset_asserted(u8 shift, s16 inst, u16 rstctrl_offs)
 /**
  * am33xx_prm_assert_hardreset - assert the HW reset line of a submodule
  * @shift: register bit shift corresponding to the reset line to assert
+ * @part: CM partition, ignored for AM33xx
  * @inst: CM instance register offset (*_INST macro)
  * @rstctrl_reg: RM_RSTCTRL register address for this module
  *
@@ -83,7 +90,8 @@ int am33xx_prm_is_hardreset_asserted(u8 shift, s16 inst, u16 rstctrl_offs)
  * place the submodule into reset.  Returns 0 upon success or -EINVAL
  * upon an argument error.
  */
-int am33xx_prm_assert_hardreset(u8 shift, s16 inst, u16 rstctrl_offs)
+static int am33xx_prm_assert_hardreset(u8 shift, u8 part, s16 inst,
+				       u16 rstctrl_offs)
 {
 	u32 mask = 1 << shift;
 
@@ -96,6 +104,8 @@ int am33xx_prm_assert_hardreset(u8 shift, s16 inst, u16 rstctrl_offs)
  * am33xx_prm_deassert_hardreset - deassert a submodule hardreset line and
  * wait
  * @shift: register bit shift corresponding to the reset line to deassert
+ * @st_shift: reset status register bit shift corresponding to the reset line
+ * @part: PRM partition, not used for AM33xx
  * @inst: CM instance register offset (*_INST macro)
  * @rstctrl_reg: RM_RSTCTRL register address for this module
  * @rstst_reg: RM_RSTST register address for this module
@@ -109,14 +119,15 @@ int am33xx_prm_assert_hardreset(u8 shift, s16 inst, u16 rstctrl_offs)
  * -EINVAL upon an argument error, -EEXIST if the submodule was already out
  * of reset, or -EBUSY if the submodule did not exit reset promptly.
  */
-int am33xx_prm_deassert_hardreset(u8 shift, u8 st_shift, s16 inst,
-		u16 rstctrl_offs, u16 rstst_offs)
+static int am33xx_prm_deassert_hardreset(u8 shift, u8 st_shift, u8 part,
+					 s16 inst, u16 rstctrl_offs,
+					 u16 rstst_offs)
 {
 	int c;
 	u32 mask = 1 << st_shift;
 
 	/* Check the current status to avoid  de-asserting the line twice */
-	if (am33xx_prm_is_hardreset_asserted(shift, inst, rstctrl_offs) == 0)
+	if (am33xx_prm_is_hardreset_asserted(shift, 0, inst, rstctrl_offs) == 0)
 		return -EEXIST;
 
 	/* Clear the reset status by writing 1 to the status bit */
@@ -128,7 +139,7 @@ int am33xx_prm_deassert_hardreset(u8 shift, u8 st_shift, s16 inst,
 	am33xx_prm_rmw_reg_bits(mask, 0, inst, rstctrl_offs);
 
 	/* wait the status to be set */
-	omap_test_timeout(am33xx_prm_is_hardreset_asserted(st_shift, inst,
+	omap_test_timeout(am33xx_prm_is_hardreset_asserted(st_shift, 0, inst,
 							   rstst_offs),
 			  MAX_MODULE_HARDRESET_WAIT, c);
 
@@ -325,6 +336,23 @@ static int am33xx_check_vcvp(void)
 	return 0;
 }
 
+/**
+ * am33xx_prm_global_warm_sw_reset - reboot the device via warm reset
+ *
+ * Immediately reboots the device through warm reset.
+ */
+static void am33xx_prm_global_warm_sw_reset(void)
+{
+	am33xx_prm_rmw_reg_bits(AM33XX_RST_GLOBAL_WARM_SW_MASK,
+				AM33XX_RST_GLOBAL_WARM_SW_MASK,
+				AM33XX_PRM_DEVICE_MOD,
+				AM33XX_PRM_RSTCTRL_OFFSET);
+
+	/* OCP barrier */
+	(void)am33xx_prm_read_reg(AM33XX_PRM_DEVICE_MOD,
+				  AM33XX_PRM_RSTCTRL_OFFSET);
+}
+
 struct pwrdm_ops am33xx_pwrdm_operations = {
 	.pwrdm_set_next_pwrst		= am33xx_pwrdm_set_next_pwrst,
 	.pwrdm_read_next_pwrst		= am33xx_pwrdm_read_next_pwrst,
@@ -342,3 +370,21 @@ struct pwrdm_ops am33xx_pwrdm_operations = {
 	.pwrdm_wait_transition		= am33xx_pwrdm_wait_transition,
 	.pwrdm_has_voltdm		= am33xx_check_vcvp,
 };
+
+static struct prm_ll_data am33xx_prm_ll_data = {
+	.assert_hardreset		= am33xx_prm_assert_hardreset,
+	.deassert_hardreset		= am33xx_prm_deassert_hardreset,
+	.is_hardreset_asserted		= am33xx_prm_is_hardreset_asserted,
+	.reset_system			= am33xx_prm_global_warm_sw_reset,
+};
+
+int __init am33xx_prm_init(void)
+{
+	return prm_register(&am33xx_prm_ll_data);
+}
+
+static void __exit am33xx_prm_exit(void)
+{
+	prm_unregister(&am33xx_prm_ll_data);
+}
+__exitcall(am33xx_prm_exit);
diff --git a/arch/arm/mach-omap2/prm33xx.h b/arch/arm/mach-omap2/prm33xx.h
index 9b9918d..98ac41f 100644
--- a/arch/arm/mach-omap2/prm33xx.h
+++ b/arch/arm/mach-omap2/prm33xx.h
@@ -118,14 +118,7 @@
 #define AM33XX_PM_CEFUSE_PWRSTST		AM33XX_PRM_REGADDR(AM33XX_PRM_CEFUSE_MOD, 0x0004)
 
 #ifndef __ASSEMBLER__
-extern u32 am33xx_prm_read_reg(s16 inst, u16 idx);
-extern void am33xx_prm_write_reg(u32 val, s16 inst, u16 idx);
-extern u32 am33xx_prm_rmw_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx);
-extern void am33xx_prm_global_warm_sw_reset(void);
-extern int am33xx_prm_is_hardreset_asserted(u8 shift, s16 inst,
-		u16 rstctrl_offs);
-extern int am33xx_prm_assert_hardreset(u8 shift, s16 inst, u16 rstctrl_offs);
-extern int am33xx_prm_deassert_hardreset(u8 shift, u8 st_shift, s16 inst,
-		u16 rstctrl_offs, u16 rstst_offs);
+int am33xx_prm_init(void);
+
 #endif /* ASSEMBLER */
 #endif
diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c
index ff08da3..c5e00c6 100644
--- a/arch/arm/mach-omap2/prm3xxx.c
+++ b/arch/arm/mach-omap2/prm3xxx.c
@@ -30,6 +30,11 @@
 #include "cm3xxx.h"
 #include "cm-regbits-34xx.h"
 
+static void omap3xxx_prm_read_pending_irqs(unsigned long *events);
+static void omap3xxx_prm_ocp_barrier(void);
+static void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask);
+static void omap3xxx_prm_restore_irqen(u32 *saved_mask);
+
 static const struct omap_prcm_irq omap3_prcm_irqs[] = {
 	OMAP_PRCM_IRQ("wkup",	0,	0),
 	OMAP_PRCM_IRQ("io",	9,	1),
@@ -131,7 +136,7 @@ u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset)
  * recommended way to restart the SoC, considering Errata i520.  No
  * return value.
  */
-void omap3xxx_prm_dpll3_reset(void)
+static void omap3xxx_prm_dpll3_reset(void)
 {
 	omap2_prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, OMAP3430_GR_MOD,
 				   OMAP2_RM_RSTCTRL);
@@ -147,7 +152,7 @@ void omap3xxx_prm_dpll3_reset(void)
  * MPU IRQs, and store the result into the u32 pointed to by @events.
  * No return value.
  */
-void omap3xxx_prm_read_pending_irqs(unsigned long *events)
+static void omap3xxx_prm_read_pending_irqs(unsigned long *events)
 {
 	u32 mask, st;
 
@@ -166,7 +171,7 @@ void omap3xxx_prm_read_pending_irqs(unsigned long *events)
  * block, to avoid race conditions after acknowledging or clearing IRQ
  * bits.  No return value.
  */
-void omap3xxx_prm_ocp_barrier(void)
+static void omap3xxx_prm_ocp_barrier(void)
 {
 	omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET);
 }
@@ -182,7 +187,7 @@ void omap3xxx_prm_ocp_barrier(void)
  * returning; otherwise, spurious interrupts might occur.  No return
  * value.
  */
-void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask)
+static void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask)
 {
 	saved_mask[0] = omap2_prm_read_mod_reg(OCP_MOD,
 					       OMAP3_PRM_IRQENABLE_MPU_OFFSET);
@@ -202,7 +207,7 @@ void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask)
  * barrier should be needed here; any pending PRM interrupts will fire
  * once the writes reach the PRM.  No return value.
  */
-void omap3xxx_prm_restore_irqen(u32 *saved_mask)
+static void omap3xxx_prm_restore_irqen(u32 *saved_mask)
 {
 	omap2_prm_write_mod_reg(saved_mask[0], OCP_MOD,
 				OMAP3_PRM_IRQENABLE_MPU_OFFSET);
@@ -375,7 +380,7 @@ void __init omap3_prm_init_pm(bool has_uart4, bool has_iva)
  * The ST_IO_CHAIN bit does not exist in 3430 before es3.1. The only
  * thing we can do is toggle EN_IO bit for earlier omaps.
  */
-void omap3430_pre_es3_1_reconfigure_io_chain(void)
+static void omap3430_pre_es3_1_reconfigure_io_chain(void)
 {
 	omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD,
 				     PM_WKEN);
@@ -393,7 +398,7 @@ void omap3430_pre_es3_1_reconfigure_io_chain(void)
  * deasserting WUCLKIN and clearing the ST_IO_CHAIN WKST bit.  No
  * return value. These registers are only available in 3430 es3.1 and later.
  */
-void omap3_prm_reconfigure_io_chain(void)
+static void omap3_prm_reconfigure_io_chain(void)
 {
 	int i = 0;
 
@@ -416,15 +421,6 @@ void omap3_prm_reconfigure_io_chain(void)
 }
 
 /**
- * omap3xxx_prm_reconfigure_io_chain - reconfigure I/O chain
- */
-void omap3xxx_prm_reconfigure_io_chain(void)
-{
-	if (omap3_prcm_irq_setup.reconfigure_io_chain)
-		omap3_prcm_irq_setup.reconfigure_io_chain();
-}
-
-/**
  * omap3xxx_prm_enable_io_wakeup - enable wakeup events from I/O wakeup latches
  *
  * Activates the I/O wakeup event latches and allows events logged by
@@ -664,6 +660,10 @@ static int omap3xxx_prm_late_init(void);
 static struct prm_ll_data omap3xxx_prm_ll_data = {
 	.read_reset_sources = &omap3xxx_prm_read_reset_sources,
 	.late_init = &omap3xxx_prm_late_init,
+	.assert_hardreset = &omap2_prm_assert_hardreset,
+	.deassert_hardreset = &omap2_prm_deassert_hardreset,
+	.is_hardreset_asserted = &omap2_prm_is_hardreset_asserted,
+	.reset_system = &omap3xxx_prm_dpll3_reset,
 };
 
 int __init omap3xxx_prm_init(void)
diff --git a/arch/arm/mach-omap2/prm3xxx.h b/arch/arm/mach-omap2/prm3xxx.h
index bc37d42..cfde3f4 100644
--- a/arch/arm/mach-omap2/prm3xxx.h
+++ b/arch/arm/mach-omap2/prm3xxx.h
@@ -144,22 +144,6 @@ extern u32 omap3_prm_vcvp_read(u8 offset);
 extern void omap3_prm_vcvp_write(u32 val, u8 offset);
 extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
 
-#ifdef CONFIG_ARCH_OMAP3
-void omap3xxx_prm_reconfigure_io_chain(void);
-#else
-static inline void omap3xxx_prm_reconfigure_io_chain(void)
-{
-}
-#endif
-
-/* PRM interrupt-related functions */
-extern void omap3xxx_prm_read_pending_irqs(unsigned long *events);
-extern void omap3xxx_prm_ocp_barrier(void);
-extern void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask);
-extern void omap3xxx_prm_restore_irqen(u32 *saved_mask);
-
-extern void omap3xxx_prm_dpll3_reset(void);
-
 extern int __init omap3xxx_prm_init(void);
 extern u32 omap3xxx_prm_get_reset_sources(void);
 int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits);
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index 0958d07..cc170fb 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -32,6 +32,12 @@
 
 /* Static data */
 
+static void omap44xx_prm_read_pending_irqs(unsigned long *events);
+static void omap44xx_prm_ocp_barrier(void);
+static void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask);
+static void omap44xx_prm_restore_irqen(u32 *saved_mask);
+static void omap44xx_prm_reconfigure_io_chain(void);
+
 static const struct omap_prcm_irq omap4_prcm_irqs[] = {
 	OMAP_PRCM_IRQ("io",     9,      1),
 };
@@ -80,19 +86,19 @@ static struct prm_reset_src_map omap44xx_prm_reset_src_map[] = {
 /* PRM low-level functions */
 
 /* Read a register in a CM/PRM instance in the PRM module */
-u32 omap4_prm_read_inst_reg(s16 inst, u16 reg)
+static u32 omap4_prm_read_inst_reg(s16 inst, u16 reg)
 {
 	return readl_relaxed(prm_base + inst + reg);
 }
 
 /* Write into a register in a CM/PRM instance in the PRM module */
-void omap4_prm_write_inst_reg(u32 val, s16 inst, u16 reg)
+static void omap4_prm_write_inst_reg(u32 val, s16 inst, u16 reg)
 {
 	writel_relaxed(val, prm_base + inst + reg);
 }
 
 /* Read-modify-write a register in a PRM module. Caller must lock */
-u32 omap4_prm_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 reg)
+static u32 omap4_prm_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 reg)
 {
 	u32 v;
 
@@ -207,7 +213,7 @@ static inline u32 _read_pending_irq_reg(u16 irqen_offs, u16 irqst_offs)
  * MPU IRQs, and store the result into the two u32s pointed to by @events.
  * No return value.
  */
-void omap44xx_prm_read_pending_irqs(unsigned long *events)
+static void omap44xx_prm_read_pending_irqs(unsigned long *events)
 {
 	events[0] = _read_pending_irq_reg(OMAP4_PRM_IRQENABLE_MPU_OFFSET,
 					  OMAP4_PRM_IRQSTATUS_MPU_OFFSET);
@@ -224,7 +230,7 @@ void omap44xx_prm_read_pending_irqs(unsigned long *events)
  * block, to avoid race conditions after acknowledging or clearing IRQ
  * bits.  No return value.
  */
-void omap44xx_prm_ocp_barrier(void)
+static void omap44xx_prm_ocp_barrier(void)
 {
 	omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST,
 				OMAP4_REVISION_PRM_OFFSET);
@@ -241,7 +247,7 @@ void omap44xx_prm_ocp_barrier(void)
  * interrupts reaches the PRM before returning; otherwise, spurious
  * interrupts might occur.  No return value.
  */
-void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask)
+static void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask)
 {
 	saved_mask[0] =
 		omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST,
@@ -270,7 +276,7 @@ void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask)
  * No OCP barrier should be needed here; any pending PRM interrupts will fire
  * once the writes reach the PRM.  No return value.
  */
-void omap44xx_prm_restore_irqen(u32 *saved_mask)
+static void omap44xx_prm_restore_irqen(u32 *saved_mask)
 {
 	omap4_prm_write_inst_reg(saved_mask[0], OMAP4430_PRM_OCP_SOCKET_INST,
 				 OMAP4_PRM_IRQENABLE_MPU_OFFSET);
@@ -287,7 +293,7 @@ void omap44xx_prm_restore_irqen(u32 *saved_mask)
  * deasserting WUCLKIN and waiting for WUCLKOUT to be deasserted.
  * No return value. XXX Are the final two steps necessary?
  */
-void omap44xx_prm_reconfigure_io_chain(void)
+static void omap44xx_prm_reconfigure_io_chain(void)
 {
 	int i = 0;
 	s32 inst = omap4_prmst_get_prm_dev_inst();
@@ -652,11 +658,10 @@ static int omap4_pwrdm_wait_transition(struct powerdomain *pwrdm)
 
 static int omap4_check_vcvp(void)
 {
-	/* No VC/VP on dra7xx devices */
-	if (soc_is_dra7xx())
-		return 0;
+	if (prm_features & PRM_HAS_VOLTAGE)
+		return 1;
 
-	return 1;
+	return 0;
 }
 
 struct pwrdm_ops omap4_pwrdm_operations = {
@@ -689,6 +694,10 @@ static struct prm_ll_data omap44xx_prm_ll_data = {
 	.was_any_context_lost_old = &omap44xx_prm_was_any_context_lost_old,
 	.clear_context_loss_flags_old = &omap44xx_prm_clear_context_loss_flags_old,
 	.late_init = &omap44xx_prm_late_init,
+	.assert_hardreset	= omap4_prminst_assert_hardreset,
+	.deassert_hardreset	= omap4_prminst_deassert_hardreset,
+	.is_hardreset_asserted	= omap4_prminst_is_hardreset_asserted,
+	.reset_system		= omap4_prminst_global_warm_sw_reset,
 };
 
 int __init omap44xx_prm_init(void)
@@ -696,6 +705,9 @@ int __init omap44xx_prm_init(void)
 	if (cpu_is_omap44xx() || soc_is_omap54xx() || soc_is_dra7xx())
 		prm_features |= PRM_HAS_IO_WAKEUP;
 
+	if (!soc_is_dra7xx())
+		prm_features |= PRM_HAS_VOLTAGE;
+
 	return prm_register(&omap44xx_prm_ll_data);
 }
 
diff --git a/arch/arm/mach-omap2/prm44xx_54xx.h b/arch/arm/mach-omap2/prm44xx_54xx.h
index 8d95aa5..f751251 100644
--- a/arch/arm/mach-omap2/prm44xx_54xx.h
+++ b/arch/arm/mach-omap2/prm44xx_54xx.h
@@ -26,10 +26,6 @@
 /* Function prototypes */
 #ifndef __ASSEMBLER__
 
-extern u32 omap4_prm_read_inst_reg(s16 inst, u16 idx);
-extern void omap4_prm_write_inst_reg(u32 val, s16 inst, u16 idx);
-extern u32 omap4_prm_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx);
-
 /* OMAP4/OMAP5-specific VP functions */
 u32 omap4_prm_vp_check_txdone(u8 vp_id);
 void omap4_prm_vp_clear_txdone(u8 vp_id);
@@ -42,21 +38,6 @@ extern u32 omap4_prm_vcvp_read(u8 offset);
 extern void omap4_prm_vcvp_write(u32 val, u8 offset);
 extern u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
 
-#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
-	defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM43XX)
-void omap44xx_prm_reconfigure_io_chain(void);
-#else
-static inline void omap44xx_prm_reconfigure_io_chain(void)
-{
-}
-#endif
-
-/* PRM interrupt-related functions */
-extern void omap44xx_prm_read_pending_irqs(unsigned long *events);
-extern void omap44xx_prm_ocp_barrier(void);
-extern void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask);
-extern void omap44xx_prm_restore_irqen(u32 *saved_mask);
-
 extern int __init omap44xx_prm_init(void);
 extern u32 omap44xx_prm_get_reset_sources(void);
 
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index ee2b522..779940c 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -423,6 +423,105 @@ void prm_clear_context_loss_flags_old(u8 part, s16 inst, u16 idx)
 }
 
 /**
+ * omap_prm_assert_hardreset - assert hardreset for an IP block
+ * @shift: register bit shift corresponding to the reset line
+ * @part: PRM partition
+ * @prm_mod: PRM submodule base or instance offset
+ * @offset: register offset
+ *
+ * Asserts a hardware reset line for an IP block.
+ */
+int omap_prm_assert_hardreset(u8 shift, u8 part, s16 prm_mod, u16 offset)
+{
+	if (!prm_ll_data->assert_hardreset) {
+		WARN_ONCE(1, "prm: %s: no mapping function defined\n",
+			  __func__);
+		return -EINVAL;
+	}
+
+	return prm_ll_data->assert_hardreset(shift, part, prm_mod, offset);
+}
+
+/**
+ * omap_prm_deassert_hardreset - deassert hardreset for an IP block
+ * @shift: register bit shift corresponding to the reset line
+ * @st_shift: reset status bit shift corresponding to the reset line
+ * @part: PRM partition
+ * @prm_mod: PRM submodule base or instance offset
+ * @offset: register offset
+ * @st_offset: status register offset
+ *
+ * Deasserts a hardware reset line for an IP block.
+ */
+int omap_prm_deassert_hardreset(u8 shift, u8 st_shift, u8 part, s16 prm_mod,
+				u16 offset, u16 st_offset)
+{
+	if (!prm_ll_data->deassert_hardreset) {
+		WARN_ONCE(1, "prm: %s: no mapping function defined\n",
+			  __func__);
+		return -EINVAL;
+	}
+
+	return prm_ll_data->deassert_hardreset(shift, st_shift, part, prm_mod,
+					       offset, st_offset);
+}
+
+/**
+ * omap_prm_is_hardreset_asserted - check the hardreset status for an IP block
+ * @shift: register bit shift corresponding to the reset line
+ * @part: PRM partition
+ * @prm_mod: PRM submodule base or instance offset
+ * @offset: register offset
+ *
+ * Checks if a hardware reset line for an IP block is enabled or not.
+ */
+int omap_prm_is_hardreset_asserted(u8 shift, u8 part, s16 prm_mod, u16 offset)
+{
+	if (!prm_ll_data->is_hardreset_asserted) {
+		WARN_ONCE(1, "prm: %s: no mapping function defined\n",
+			  __func__);
+		return -EINVAL;
+	}
+
+	return prm_ll_data->is_hardreset_asserted(shift, part, prm_mod, offset);
+}
+
+/**
+ * omap_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain
+ *
+ * Clear any previously-latched I/O wakeup events and ensure that the
+ * I/O wakeup gates are aligned with the current mux settings.
+ * Calls SoC specific I/O chain reconfigure function if available,
+ * otherwise does nothing.
+ */
+void omap_prm_reconfigure_io_chain(void)
+{
+	if (!prcm_irq_setup || !prcm_irq_setup->reconfigure_io_chain)
+		return;
+
+	prcm_irq_setup->reconfigure_io_chain();
+}
+
+/**
+ * omap_prm_reset_system - trigger global SW reset
+ *
+ * Triggers SoC specific global warm reset to reboot the device.
+ */
+void omap_prm_reset_system(void)
+{
+	if (!prm_ll_data->reset_system) {
+		WARN_ONCE(1, "prm: %s: no mapping function defined\n",
+			  __func__);
+		return;
+	}
+
+	prm_ll_data->reset_system();
+
+	while (1)
+		cpu_relax();
+}
+
+/**
  * prm_register - register per-SoC low-level data with the PRM
  * @pld: low-level per-SoC OMAP PRM data & function pointers to register
  *
diff --git a/arch/arm/mach-omap2/prminst44xx.c b/arch/arm/mach-omap2/prminst44xx.c
index 225e025..8adf7b1 100644
--- a/arch/arm/mach-omap2/prminst44xx.c
+++ b/arch/arm/mach-omap2/prminst44xx.c
@@ -148,8 +148,12 @@ int omap4_prminst_assert_hardreset(u8 shift, u8 part, s16 inst,
 /**
  * omap4_prminst_deassert_hardreset - deassert a submodule hardreset line and
  * wait
- * @rstctrl_reg: RM_RSTCTRL register address for this module
  * @shift: register bit shift corresponding to the reset line to deassert
+ * @st_shift: status bit offset, not used for OMAP4+
+ * @part: PRM partition
+ * @inst: PRM instance offset
+ * @rstctrl_offs: reset register offset
+ * @st_offs: reset status register offset, not used for OMAP4+
  *
  * Some IPs like dsp, ipu or iva contain processors that require an HW
  * reset line to be asserted / deasserted in order to fully enable the
@@ -160,8 +164,8 @@ int omap4_prminst_assert_hardreset(u8 shift, u8 part, s16 inst,
  * -EINVAL upon an argument error, -EEXIST if the submodule was already out
  * of reset, or -EBUSY if the submodule did not exit reset promptly.
  */
-int omap4_prminst_deassert_hardreset(u8 shift, u8 part, s16 inst,
-				     u16 rstctrl_offs)
+int omap4_prminst_deassert_hardreset(u8 shift, u8 st_shift, u8 part, s16 inst,
+				     u16 rstctrl_offs, u16 st_offs)
 {
 	int c;
 	u32 mask = 1 << shift;
diff --git a/arch/arm/mach-omap2/prminst44xx.h b/arch/arm/mach-omap2/prminst44xx.h
index 583aa37..fb1c9d7 100644
--- a/arch/arm/mach-omap2/prminst44xx.h
+++ b/arch/arm/mach-omap2/prminst44xx.h
@@ -30,8 +30,9 @@ extern int omap4_prminst_is_hardreset_asserted(u8 shift, u8 part, s16 inst,
 					       u16 rstctrl_offs);
 extern int omap4_prminst_assert_hardreset(u8 shift, u8 part, s16 inst,
 					  u16 rstctrl_offs);
-extern int omap4_prminst_deassert_hardreset(u8 shift, u8 part, s16 inst,
-					    u16 rstctrl_offs);
+int omap4_prminst_deassert_hardreset(u8 shift, u8 st_shift, u8 part,
+				     s16 inst, u16 rstctrl_offs,
+				     u16 rstst_offs);
 
 extern void omap_prm_base_init(void);
 
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index e6690a4..83efe91 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -4,6 +4,17 @@ menu "Intel PXA2xx/PXA3xx Implementations"
 
 comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
 
+config MACH_PXA27X_DT
+	bool "Support PXA27x platforms from device tree"
+	select CPU_PXA27x
+	select POWER_SUPPLY
+	select PXA27x
+	select USE_OF
+	help
+	  Include support for Marvell PXA27x based platforms using
+	  the device tree. Needn't select any other machine while
+	  MACH_PXA27X_DT is enabled.
+
 config MACH_PXA3XX_DT
 	bool "Support PXA3xx platforms from device tree"
 	select CPU_PXA300
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 2fe1824..eb0bf76 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_CPU_PXA930)	+= pxa930.o
 
 # Device Tree support
 obj-$(CONFIG_MACH_PXA3XX_DT)	+= pxa-dt.o
+obj-$(CONFIG_MACH_PXA27X_DT)	+= pxa-dt.o
 
 # Intel/Marvell Dev Platforms
 obj-$(CONFIG_ARCH_LUBBOCK)	+= lubbock.o
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 6915a9f..51531ec 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -378,7 +378,7 @@ static void __init em_x270_init_nand(void)
 
 	err = gpio_request(GPIO11_NAND_CS, "NAND CS");
 	if (err) {
-		pr_warning("EM-X270: failed to request NAND CS gpio\n");
+		pr_warn("EM-X270: failed to request NAND CS gpio\n");
 		return;
 	}
 
@@ -386,7 +386,7 @@ static void __init em_x270_init_nand(void)
 
 	err = gpio_request(nand_rb, "NAND R/B");
 	if (err) {
-		pr_warning("EM-X270: failed to request NAND R/B gpio\n");
+		pr_warn("EM-X270: failed to request NAND R/B gpio\n");
 		gpio_free(GPIO11_NAND_CS);
 		return;
 	}
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index 8963984..7a9fa1a 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -13,11 +13,11 @@
 
 struct irq_data;
 
-extern void pxa_timer_init(void);
-
-extern void __init pxa_map_io(void);
-
 extern unsigned int get_clk_frequency_khz(int info);
+extern void __init pxa_dt_irq_init(int (*fn)(struct irq_data *,
+					     unsigned int));
+extern void __init pxa_map_io(void);
+extern void pxa_timer_init(void);
 
 #define SET_BANK(__nr,__start,__size) \
 	mi->bank[__nr].start = (__start), \
@@ -25,6 +25,43 @@ extern unsigned int get_clk_frequency_khz(int info);
 
 #define ARRAY_AND_SIZE(x)	(x), ARRAY_SIZE(x)
 
+#define pxa25x_handle_irq icip_handle_irq
+extern void __init pxa25x_init_irq(void);
+extern void __init pxa25x_map_io(void);
+extern void __init pxa26x_init_irq(void);
+
+#define pxa27x_handle_irq ichp_handle_irq
+extern void __init pxa27x_dt_init_irq(void);
+extern unsigned	pxa27x_get_clk_frequency_khz(int);
+extern void __init pxa27x_init_irq(void);
+extern void __init pxa27x_map_io(void);
+
+#define pxa3xx_handle_irq ichp_handle_irq
+extern void __init pxa3xx_dt_init_irq(void);
+extern void __init pxa3xx_init_irq(void);
+extern void __init pxa3xx_map_io(void);
+
+extern struct syscore_ops pxa_irq_syscore_ops;
+extern struct syscore_ops pxa2xx_mfp_syscore_ops;
+extern struct syscore_ops pxa3xx_mfp_syscore_ops;
+
+void __init pxa_set_ffuart_info(void *info);
+void __init pxa_set_btuart_info(void *info);
+void __init pxa_set_stuart_info(void *info);
+void __init pxa_set_hwuart_info(void *info);
+
+void pxa_restart(enum reboot_mode, const char *);
+
+#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
+extern void pxa2xx_clear_reset_status(unsigned int);
+#else
+static inline void pxa2xx_clear_reset_status(unsigned int mask) {}
+#endif
+
+/*
+ * Once fully converted to the clock framework, all these functions should be
+ * removed, and replaced with a clk_get(NULL, "core").
+ */
 #ifdef CONFIG_PXA25x
 extern unsigned pxa25x_get_clk_frequency_khz(int);
 #else
@@ -32,30 +69,12 @@ extern unsigned pxa25x_get_clk_frequency_khz(int);
 #endif
 
 #ifdef CONFIG_PXA27x
-extern unsigned pxa27x_get_clk_frequency_khz(int);
 #else
 #define pxa27x_get_clk_frequency_khz(x)		(0)
 #endif
 
-#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
-extern void pxa2xx_clear_reset_status(unsigned int);
-#else
-static inline void pxa2xx_clear_reset_status(unsigned int mask) {}
-#endif
-
 #ifdef CONFIG_PXA3xx
-extern unsigned pxa3xx_get_clk_frequency_khz(int);
+extern unsigned	pxa3xx_get_clk_frequency_khz(int);
 #else
 #define pxa3xx_get_clk_frequency_khz(x)		(0)
 #endif
-
-extern struct syscore_ops pxa_irq_syscore_ops;
-extern struct syscore_ops pxa2xx_mfp_syscore_ops;
-extern struct syscore_ops pxa3xx_mfp_syscore_ops;
-
-void __init pxa_set_ffuart_info(void *info);
-void __init pxa_set_btuart_info(void *info);
-void __init pxa_set_stuart_info(void *info);
-void __init pxa_set_hwuart_info(void *info);
-
-void pxa_restart(enum reboot_mode, const char *);
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index 00b92da..f6c76a3 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -140,8 +140,7 @@ static void gumstix_setup_bt_clock(void)
 	int timeout = 500;
 
 	if (!(OSCC & OSCC_OOK))
-		pr_warning("32kHz clock was not on. Bootloader may need to "
-				"be updated\n");
+		pr_warn("32kHz clock was not on. Bootloader may need to be updated\n");
 	else
 		return;
 
diff --git a/arch/arm/mach-pxa/include/mach/pxa25x.h b/arch/arm/mach-pxa/include/mach/pxa25x.h
index 3ac0baa..5a34175 100644
--- a/arch/arm/mach-pxa/include/mach/pxa25x.h
+++ b/arch/arm/mach-pxa/include/mach/pxa25x.h
@@ -6,12 +6,4 @@
 #include <mach/mfp-pxa25x.h>
 #include <mach/irqs.h>
 
-extern void __init pxa25x_map_io(void);
-extern void __init pxa25x_init_irq(void);
-#ifdef CONFIG_CPU_PXA26x
-extern void __init pxa26x_init_irq(void);
-#endif
-
-#define pxa25x_handle_irq	icip_handle_irq
-
 #endif /* __MACH_PXA25x_H */
diff --git a/arch/arm/mach-pxa/include/mach/pxa27x.h b/arch/arm/mach-pxa/include/mach/pxa27x.h
index 7cff640..599b925 100644
--- a/arch/arm/mach-pxa/include/mach/pxa27x.h
+++ b/arch/arm/mach-pxa/include/mach/pxa27x.h
@@ -19,11 +19,7 @@
 #define ARB_CORE_PARK		(1<<24)	   /* Be parked with core when idle */
 #define ARB_LOCK_FLAG		(1<<23)	   /* Only Locking masters gain access to the bus */
 
-extern void __init pxa27x_map_io(void);
-extern void __init pxa27x_init_irq(void);
 extern int __init pxa27x_set_pwrmode(unsigned int mode);
 extern void pxa27x_cpu_pm_enter(suspend_state_t state);
 
-#define pxa27x_handle_irq	ichp_handle_irq
-
 #endif /* __MACH_PXA27x_H */
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx.h b/arch/arm/mach-pxa/include/mach/pxa3xx.h
index 6dd7fa1..b4143fb 100644
--- a/arch/arm/mach-pxa/include/mach/pxa3xx.h
+++ b/arch/arm/mach-pxa/include/mach/pxa3xx.h
@@ -5,9 +5,4 @@
 #include <mach/pxa3xx-regs.h>
 #include <mach/irqs.h>
 
-extern void __init pxa3xx_map_io(void);
-extern void __init pxa3xx_init_irq(void);
-
-#define pxa3xx_handle_irq	ichp_handle_irq
-
 #endif /* __MACH_PXA3XX_H */
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index ef0426a..666b789 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -93,8 +93,8 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c)
 		break;
 	default:
 		/* warning and fall through, treat as MFP_LPM_DEFAULT */
-		pr_warning("%s: GPIO%d: unsupported low power mode\n",
-				__func__, gpio);
+		pr_warn("%s: GPIO%d: unsupported low power mode\n",
+			__func__, gpio);
 		break;
 	}
 
@@ -107,14 +107,12 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c)
 	 * configurations of those pins not able to wakeup
 	 */
 	if ((c & MFP_LPM_CAN_WAKEUP) && !gpio_desc[gpio].can_wakeup) {
-		pr_warning("%s: GPIO%d unable to wakeup\n",
-				__func__, gpio);
+		pr_warn("%s: GPIO%d unable to wakeup\n", __func__, gpio);
 		return -EINVAL;
 	}
 
 	if ((c & MFP_LPM_CAN_WAKEUP) && is_out) {
-		pr_warning("%s: output GPIO%d unable to wakeup\n",
-				__func__, gpio);
+		pr_warn("%s: output GPIO%d unable to wakeup\n", __func__, gpio);
 		return -EINVAL;
 	}
 
@@ -126,7 +124,7 @@ static inline int __mfp_validate(int mfp)
 	int gpio = mfp_to_gpio(mfp);
 
 	if ((mfp > MFP_PIN_GPIO127) || !gpio_desc[gpio].valid) {
-		pr_warning("%s: GPIO%d is invalid pin\n", __func__, gpio);
+		pr_warn("%s: GPIO%d is invalid pin\n", __func__, gpio);
 		return -1;
 	}
 
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 1319916..29019be 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -446,7 +446,7 @@ static void __init poodle_init(void)
 
 	ret = platform_add_devices(devices, ARRAY_SIZE(devices));
 	if (ret)
-		pr_warning("poodle: Unable to register LoCoMo device\n");
+		pr_warn("poodle: Unable to register LoCoMo device\n");
 
 	pxa_set_fb_info(&poodle_locomo_device.dev, &poodle_fb_info);
 	pxa_set_udc_info(&udc_info);
diff --git a/arch/arm/mach-pxa/pxa-dt.c b/arch/arm/mach-pxa/pxa-dt.c
index f6a2c4b..7e0e5bd 100644
--- a/arch/arm/mach-pxa/pxa-dt.c
+++ b/arch/arm/mach-pxa/pxa-dt.c
@@ -15,13 +15,10 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <mach/irqs.h>
-#include <mach/pxa3xx.h>
 
 #include "generic.h"
 
 #ifdef CONFIG_PXA3xx
-extern void __init pxa3xx_dt_init_irq(void);
-
 static const struct of_dev_auxdata pxa3xx_auxdata_lookup[] __initconst = {
 	OF_DEV_AUXDATA("mrvl,pxa-uart",		0x40100000, "pxa2xx-uart.0", NULL),
 	OF_DEV_AUXDATA("mrvl,pxa-uart",		0x40200000, "pxa2xx-uart.1", NULL),
@@ -61,3 +58,18 @@ DT_MACHINE_START(PXA_DT, "Marvell PXA3xx (Device Tree Support)")
 	.dt_compat	= pxa3xx_dt_board_compat,
 MACHINE_END
 #endif
+
+#ifdef CONFIG_PXA27x
+static const char * const pxa27x_dt_board_compat[] __initconst = {
+	"marvell,pxa270",
+	NULL,
+};
+
+DT_MACHINE_START(PXA27X_DT, "Marvell PXA2xx (Device Tree Support)")
+	.map_io		= pxa27x_map_io,
+	.init_irq	= pxa27x_dt_init_irq,
+	.handle_irq	= pxa27x_handle_irq,
+	.restart	= pxa_restart,
+	.dt_compat	= pxa27x_dt_board_compat,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index b040d7d..af423a4 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -398,6 +398,12 @@ void __init pxa27x_init_irq(void)
 	pxa_init_irq(34, pxa27x_set_wake);
 }
 
+void __init pxa27x_dt_init_irq(void)
+{
+	if (IS_ENABLED(CONFIG_OF))
+		pxa_dt_irq_init(pxa27x_set_wake);
+}
+
 static struct map_desc pxa27x_io_desc[] __initdata = {
 	{	/* Mem Ctl */
 		.virtual	= (unsigned long)SMEMC_VIRT,
diff --git a/arch/arm/mach-pxa/pxa3xx-ulpi.c b/arch/arm/mach-pxa/pxa3xx-ulpi.c
index e329cce..614003e 100644
--- a/arch/arm/mach-pxa/pxa3xx-ulpi.c
+++ b/arch/arm/mach-pxa/pxa3xx-ulpi.c
@@ -74,7 +74,7 @@ static int pxa310_ulpi_poll(void)
 		cpu_relax();
 	}
 
-	pr_warning("%s: ULPI access timed out!\n", __func__);
+	pr_warn("%s: ULPI access timed out!\n", __func__);
 
 	return -ETIMEDOUT;
 }
@@ -84,7 +84,7 @@ static int pxa310_ulpi_read(struct usb_phy *otg, u32 reg)
 	int err;
 
 	if (pxa310_ulpi_get_phymode() != SYNCH) {
-		pr_warning("%s: PHY is not in SYNCH mode!\n", __func__);
+		pr_warn("%s: PHY is not in SYNCH mode!\n", __func__);
 		return -EBUSY;
 	}
 
@@ -101,7 +101,7 @@ static int pxa310_ulpi_read(struct usb_phy *otg, u32 reg)
 static int pxa310_ulpi_write(struct usb_phy *otg, u32 val, u32 reg)
 {
 	if (pxa310_ulpi_get_phymode() != SYNCH) {
-		pr_warning("%s: PHY is not in SYNCH mode!\n", __func__);
+		pr_warn("%s: PHY is not in SYNCH mode!\n", __func__);
 		return -EBUSY;
 	}
 
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index 8386dc3..a762b23 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -521,7 +521,7 @@ static void __init raumfeld_w1_init(void)
 				"W1 external pullup enable");
 
 	if (ret < 0)
-		pr_warning("Unable to request GPIO_W1_PULLUP_ENABLE\n");
+		pr_warn("Unable to request GPIO_W1_PULLUP_ENABLE\n");
 	else
 		gpio_direction_output(GPIO_W1_PULLUP_ENABLE, 0);
 
@@ -600,7 +600,7 @@ static void __init raumfeld_lcd_init(void)
 
 	ret = gpio_request(GPIO_TFT_VA_EN, "display VA enable");
 	if (ret < 0)
-		pr_warning("Unable to request GPIO_TFT_VA_EN\n");
+		pr_warn("Unable to request GPIO_TFT_VA_EN\n");
 	else
 		gpio_direction_output(GPIO_TFT_VA_EN, 1);
 
@@ -608,7 +608,7 @@ static void __init raumfeld_lcd_init(void)
 
 	ret = gpio_request(GPIO_DISPLAY_ENABLE, "display enable");
 	if (ret < 0)
-		pr_warning("Unable to request GPIO_DISPLAY_ENABLE\n");
+		pr_warn("Unable to request GPIO_DISPLAY_ENABLE\n");
 	else
 		gpio_direction_output(GPIO_DISPLAY_ENABLE, 1);
 
@@ -814,17 +814,17 @@ static void __init raumfeld_power_init(void)
 	/* Set PEN2 high to enable maximum charge current */
 	ret = gpio_request(GPIO_CHRG_PEN2, "CHRG_PEN2");
 	if (ret < 0)
-		pr_warning("Unable to request GPIO_CHRG_PEN2\n");
+		pr_warn("Unable to request GPIO_CHRG_PEN2\n");
 	else
 		gpio_direction_output(GPIO_CHRG_PEN2, 1);
 
 	ret = gpio_request(GPIO_CHARGE_DC_OK, "CABLE_DC_OK");
 	if (ret < 0)
-		pr_warning("Unable to request GPIO_CHARGE_DC_OK\n");
+		pr_warn("Unable to request GPIO_CHARGE_DC_OK\n");
 
 	ret = gpio_request(GPIO_CHARGE_USB_SUSP, "CHARGE_USB_SUSP");
 	if (ret < 0)
-		pr_warning("Unable to request GPIO_CHARGE_USB_SUSP\n");
+		pr_warn("Unable to request GPIO_CHARGE_USB_SUSP\n");
 	else
 		gpio_direction_output(GPIO_CHARGE_USB_SUSP, 0);
 
@@ -976,19 +976,19 @@ static void __init raumfeld_audio_init(void)
 
 	ret = gpio_request(GPIO_CODEC_RESET, "cs4270 reset");
 	if (ret < 0)
-		pr_warning("unable to request GPIO_CODEC_RESET\n");
+		pr_warn("unable to request GPIO_CODEC_RESET\n");
 	else
 		gpio_direction_output(GPIO_CODEC_RESET, 1);
 
 	ret = gpio_request(GPIO_SPDIF_RESET, "ak4104 s/pdif reset");
 	if (ret < 0)
-		pr_warning("unable to request GPIO_SPDIF_RESET\n");
+		pr_warn("unable to request GPIO_SPDIF_RESET\n");
 	else
 		gpio_direction_output(GPIO_SPDIF_RESET, 1);
 
 	ret = gpio_request(GPIO_MCLK_RESET, "MCLK reset");
 	if (ret < 0)
-		pr_warning("unable to request GPIO_MCLK_RESET\n");
+		pr_warn("unable to request GPIO_MCLK_RESET\n");
 	else
 		gpio_direction_output(GPIO_MCLK_RESET, 1);
 
@@ -1019,20 +1019,20 @@ static void __init raumfeld_common_init(void)
 
 	ret = gpio_request(GPIO_W2W_RESET, "Wi2Wi reset");
 	if (ret < 0)
-		pr_warning("Unable to request GPIO_W2W_RESET\n");
+		pr_warn("Unable to request GPIO_W2W_RESET\n");
 	else
 		gpio_direction_output(GPIO_W2W_RESET, 0);
 
 	ret = gpio_request(GPIO_W2W_PDN, "Wi2Wi powerup");
 	if (ret < 0)
-		pr_warning("Unable to request GPIO_W2W_PDN\n");
+		pr_warn("Unable to request GPIO_W2W_PDN\n");
 	else
 		gpio_direction_output(GPIO_W2W_PDN, 0);
 
 	/* this can be used to switch off the device */
 	ret = gpio_request(GPIO_SHUTDOWN_SUPPLY, "supply shutdown");
 	if (ret < 0)
-		pr_warning("Unable to request GPIO_SHUTDOWN_SUPPLY\n");
+		pr_warn("Unable to request GPIO_SHUTDOWN_SUPPLY\n");
 	else
 		gpio_direction_output(GPIO_SHUTDOWN_SUPPLY, 0);
 
@@ -1051,7 +1051,7 @@ static void __init raumfeld_controller_init(void)
 
 	ret = gpio_request(GPIO_SHUTDOWN_BATT, "battery shutdown");
 	if (ret < 0)
-		pr_warning("Unable to request GPIO_SHUTDOWN_BATT\n");
+		pr_warn("Unable to request GPIO_SHUTDOWN_BATT\n");
 	else
 		gpio_direction_output(GPIO_SHUTDOWN_BATT, 0);
 
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index c158a6e..7780d1fa 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -30,7 +30,7 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/gpio.h>
-#include <linux/pda_power.h>
+#include <linux/power/gpio-charger.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/pxa2xx_spi.h>
 #include <linux/input/matrix_keypad.h>
@@ -361,44 +361,17 @@ static struct pxaficp_platform_data tosa_ficp_platform_data = {
 /*
  * Tosa AC IN
  */
-static int tosa_power_init(struct device *dev)
-{
-	int ret = gpio_request(TOSA_GPIO_AC_IN, "ac in");
-	if (ret)
-		goto err_gpio_req;
-
-	ret = gpio_direction_input(TOSA_GPIO_AC_IN);
-	if (ret)
-		goto err_gpio_in;
-
-	return 0;
-
-err_gpio_in:
-	gpio_free(TOSA_GPIO_AC_IN);
-err_gpio_req:
-	return ret;
-}
-
-static void tosa_power_exit(struct device *dev)
-{
-	gpio_free(TOSA_GPIO_AC_IN);
-}
-
-static int tosa_power_ac_online(void)
-{
-	return gpio_get_value(TOSA_GPIO_AC_IN) == 0;
-}
-
 static char *tosa_ac_supplied_to[] = {
 	"main-battery",
 	"backup-battery",
 	"jacket-battery",
 };
 
-static struct pda_power_pdata tosa_power_data = {
-	.init			= tosa_power_init,
-	.is_ac_online		= tosa_power_ac_online,
-	.exit			= tosa_power_exit,
+static struct gpio_charger_platform_data tosa_power_data = {
+	.name			= "charger",
+	.type			= POWER_SUPPLY_TYPE_MAINS,
+	.gpio			= TOSA_GPIO_AC_IN,
+	.gpio_active_low	= 1,
 	.supplied_to		= tosa_ac_supplied_to,
 	.num_supplicants	= ARRAY_SIZE(tosa_ac_supplied_to),
 };
@@ -415,7 +388,7 @@ static struct resource tosa_power_resource[] = {
 };
 
 static struct platform_device tosa_power_device = {
-	.name			= "pda-power",
+	.name			= "gpio-charger",
 	.id			= -1,
 	.dev.platform_data	= &tosa_power_data,
 	.resource		= tosa_power_resource,
diff --git a/arch/arm/mach-rockchip/headsmp.S b/arch/arm/mach-rockchip/headsmp.S
index 73206e3..46c22de 100644
--- a/arch/arm/mach-rockchip/headsmp.S
+++ b/arch/arm/mach-rockchip/headsmp.S
@@ -16,7 +16,10 @@
 #include <linux/init.h>
 
 ENTRY(rockchip_secondary_startup)
-	bl	v7_invalidate_l1
+	mrc	p15, 0, r0, c0, c0, 0	@ read main ID register
+	ldr	r1, =0x00000c09		@ Cortex-A9 primary part number
+	teq	r0, r1
+	beq	v7_invalidate_l1
 	b	secondary_startup
 ENDPROC(rockchip_secondary_startup)
 
diff --git a/arch/arm/mach-rockchip/platsmp.c b/arch/arm/mach-rockchip/platsmp.c
index 189684f..f26fcdc 100644
--- a/arch/arm/mach-rockchip/platsmp.c
+++ b/arch/arm/mach-rockchip/platsmp.c
@@ -19,7 +19,11 @@
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
 
+#include <linux/reset.h>
+#include <linux/cpu.h>
 #include <asm/cacheflush.h>
 #include <asm/cp15.h>
 #include <asm/smp_scu.h>
@@ -37,23 +41,78 @@ static int ncores;
 
 #define PMU_PWRDN_SCU		4
 
-static void __iomem *pmu_base_addr;
+static struct regmap *pmu;
 
-static inline bool pmu_power_domain_is_on(int pd)
+static int pmu_power_domain_is_on(int pd)
 {
-	return !(readl_relaxed(pmu_base_addr + PMU_PWRDN_ST) & BIT(pd));
+	u32 val;
+	int ret;
+
+	ret = regmap_read(pmu, PMU_PWRDN_ST, &val);
+	if (ret < 0)
+		return ret;
+
+	return !(val & BIT(pd));
 }
 
-static void pmu_set_power_domain(int pd, bool on)
+struct reset_control *rockchip_get_core_reset(int cpu)
 {
-	u32 val = readl_relaxed(pmu_base_addr + PMU_PWRDN_CON);
-	if (on)
-		val &= ~BIT(pd);
+	struct device *dev = get_cpu_device(cpu);
+	struct device_node *np;
+
+	/* The cpu device is only available after the initial core bringup */
+	if (dev)
+		np = dev->of_node;
 	else
-		val |=  BIT(pd);
-	writel(val, pmu_base_addr + PMU_PWRDN_CON);
+		np = of_get_cpu_node(cpu, 0);
 
-	while (pmu_power_domain_is_on(pd) != on) { }
+	return of_reset_control_get(np, NULL);
+}
+
+static int pmu_set_power_domain(int pd, bool on)
+{
+	u32 val = (on) ? 0 : BIT(pd);
+	int ret;
+
+	/*
+	 * We need to soft reset the cpu when we turn off the cpu power domain,
+	 * or else the active processors might be stalled when the individual
+	 * processor is powered down.
+	 */
+	if (read_cpuid_part() != ARM_CPU_PART_CORTEX_A9) {
+		struct reset_control *rstc = rockchip_get_core_reset(pd);
+
+		if (IS_ERR(rstc)) {
+			pr_err("%s: could not get reset control for core %d\n",
+			       __func__, pd);
+			return PTR_ERR(rstc);
+		}
+
+		if (on)
+			reset_control_deassert(rstc);
+		else
+			reset_control_assert(rstc);
+
+		reset_control_put(rstc);
+	}
+
+	ret = regmap_update_bits(pmu, PMU_PWRDN_CON, BIT(pd), val);
+	if (ret < 0) {
+		pr_err("%s: could not update power domain\n", __func__);
+		return ret;
+	}
+
+	ret = -1;
+	while (ret != on) {
+		ret = pmu_power_domain_is_on(pd);
+		if (ret < 0) {
+			pr_err("%s: could not read power domain state\n",
+				 __func__);
+			return ret;
+		}
+	}
+
+	return 0;
 }
 
 /*
@@ -63,7 +122,9 @@ static void pmu_set_power_domain(int pd, bool on)
 static int __cpuinit rockchip_boot_secondary(unsigned int cpu,
 					     struct task_struct *idle)
 {
-	if (!sram_base_addr || !pmu_base_addr) {
+	int ret;
+
+	if (!sram_base_addr || !pmu) {
 		pr_err("%s: sram or pmu missing for cpu boot\n", __func__);
 		return -ENXIO;
 	}
@@ -75,7 +136,24 @@ static int __cpuinit rockchip_boot_secondary(unsigned int cpu,
 	}
 
 	/* start the core */
-	pmu_set_power_domain(0 + cpu, true);
+	ret = pmu_set_power_domain(0 + cpu, true);
+	if (ret < 0)
+		return ret;
+
+	if (read_cpuid_part() != ARM_CPU_PART_CORTEX_A9) {
+		/* We communicate with the bootrom to active the cpus other
+		 * than cpu0, after a blob of initialize code, they will
+		 * stay at wfe state, once they are actived, they will check
+		 * the mailbox:
+		 * sram_base_addr + 4: 0xdeadbeaf
+		 * sram_base_addr + 8: start address for pc
+		 * */
+		udelay(10);
+		writel(virt_to_phys(rockchip_secondary_startup),
+			sram_base_addr + 8);
+		writel(0xDEADBEAF, sram_base_addr + 4);
+		dsb_sev();
+	}
 
 	return 0;
 }
@@ -110,8 +188,6 @@ static int __init rockchip_smp_prepare_sram(struct device_node *node)
 		return -EINVAL;
 	}
 
-	sram_base_addr = of_iomap(node, 0);
-
 	/* set the boot function for the sram code */
 	rockchip_boot_fn = virt_to_phys(rockchip_secondary_startup);
 
@@ -125,54 +201,115 @@ static int __init rockchip_smp_prepare_sram(struct device_node *node)
 	return 0;
 }
 
-static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus)
+static struct regmap_config rockchip_pmu_regmap_config = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+};
+
+static int __init rockchip_smp_prepare_pmu(void)
 {
 	struct device_node *node;
-	unsigned int i;
+	void __iomem *pmu_base;
 
-	node = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu");
+	/*
+	 * This function is only called via smp_ops->smp_prepare_cpu().
+	 * That only happens if a "/cpus" device tree node exists
+	 * and has an "enable-method" property that selects the SMP
+	 * operations defined herein.
+	 */
+	node = of_find_node_by_path("/cpus");
+
+	pmu = syscon_regmap_lookup_by_phandle(node, "rockchip,pmu");
+	of_node_put(node);
+	if (!IS_ERR(pmu))
+		return 0;
+
+	pmu = syscon_regmap_lookup_by_compatible("rockchip,rk3066-pmu");
+	if (!IS_ERR(pmu))
+		return 0;
+
+	/* fallback, create our own regmap for the pmu area */
+	pmu = NULL;
+	node = of_find_compatible_node(NULL, NULL, "rockchip,rk3066-pmu");
 	if (!node) {
-		pr_err("%s: missing scu\n", __func__);
-		return;
+		pr_err("%s: could not find pmu dt node\n", __func__);
+		return -ENODEV;
 	}
 
-	scu_base_addr = of_iomap(node, 0);
-	if (!scu_base_addr) {
-		pr_err("%s: could not map scu registers\n", __func__);
-		return;
+	pmu_base = of_iomap(node, 0);
+	if (!pmu_base) {
+		pr_err("%s: could not map pmu registers\n", __func__);
+		return -ENOMEM;
 	}
 
-	node = of_find_compatible_node(NULL, NULL, "rockchip,rk3066-smp-sram");
-	if (!node) {
-		pr_err("%s: could not find sram dt node\n", __func__);
-		return;
+	pmu = regmap_init_mmio(NULL, pmu_base, &rockchip_pmu_regmap_config);
+	if (IS_ERR(pmu)) {
+		int ret = PTR_ERR(pmu);
+
+		iounmap(pmu_base);
+		pmu = NULL;
+		pr_err("%s: regmap init failed\n", __func__);
+		return ret;
 	}
 
-	if (rockchip_smp_prepare_sram(node))
-		return;
+	return 0;
+}
 
-	node = of_find_compatible_node(NULL, NULL, "rockchip,rk3066-pmu");
+static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus)
+{
+	struct device_node *node;
+	unsigned int i;
+
+	node = of_find_compatible_node(NULL, NULL, "rockchip,rk3066-smp-sram");
 	if (!node) {
-		pr_err("%s: could not find pmu dt node\n", __func__);
+		pr_err("%s: could not find sram dt node\n", __func__);
 		return;
 	}
 
-	pmu_base_addr = of_iomap(node, 0);
-	if (!pmu_base_addr) {
-		pr_err("%s: could not map pmu registers\n", __func__);
+	sram_base_addr = of_iomap(node, 0);
+	if (!sram_base_addr) {
+		pr_err("%s: could not map sram registers\n", __func__);
 		return;
 	}
 
-	/* enable the SCU power domain */
-	pmu_set_power_domain(PMU_PWRDN_SCU, true);
-
-	/*
-	 * While the number of cpus is gathered from dt, also get the number
-	 * of cores from the scu to verify this value when booting the cores.
-	 */
-	ncores = scu_get_core_count(scu_base_addr);
+	if (rockchip_smp_prepare_pmu())
+		return;
 
-	scu_enable(scu_base_addr);
+	if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) {
+		if (rockchip_smp_prepare_sram(node))
+			return;
+
+		/* enable the SCU power domain */
+		pmu_set_power_domain(PMU_PWRDN_SCU, true);
+
+		node = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu");
+		if (!node) {
+			pr_err("%s: missing scu\n", __func__);
+			return;
+		}
+
+		scu_base_addr = of_iomap(node, 0);
+		if (!scu_base_addr) {
+			pr_err("%s: could not map scu registers\n", __func__);
+			return;
+		}
+
+		/*
+		 * While the number of cpus is gathered from dt, also get the
+		 * number of cores from the scu to verify this value when
+		 * booting the cores.
+		 */
+		ncores = scu_get_core_count(scu_base_addr);
+		pr_err("%s: ncores %d\n", __func__, ncores);
+
+		scu_enable(scu_base_addr);
+	} else {
+		unsigned int l2ctlr;
+
+		asm ("mrc p15, 1, %0, c9, c0, 2\n" : "=r" (l2ctlr));
+		ncores = ((l2ctlr >> 24) & 0x3) + 1;
+	}
 
 	/* Make sure that all cores except the first are really off */
 	for (i = 1; i < ncores; i++)
diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c
index 8ab9e0e..d226b71 100644
--- a/arch/arm/mach-rockchip/rockchip.c
+++ b/arch/arm/mach-rockchip/rockchip.c
@@ -24,6 +24,12 @@
 #include <asm/hardware/cache-l2x0.h>
 #include "core.h"
 
+static void __init rockchip_dt_init(void)
+{
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+	platform_device_register_simple("cpufreq-dt", 0, NULL, 0);
+}
+
 static const char * const rockchip_board_dt_compat[] = {
 	"rockchip,rk2928",
 	"rockchip,rk3066a",
@@ -37,4 +43,5 @@ DT_MACHINE_START(ROCKCHIP_DT, "Rockchip Cortex-A9 (Device Tree)")
 	.l2c_aux_val	= 0,
 	.l2c_aux_mask	= ~0,
 	.dt_compat	= rockchip_board_dt_compat,
+	.init_machine	= rockchip_dt_init,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 0f25395..1b4fafe 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -1,5 +1,6 @@
 config ARCH_SHMOBILE
 	bool
+	select ZONE_DMA if ARM_LPAE
 
 config PM_RCAR
 	bool
@@ -18,6 +19,7 @@ config ARCH_RCAR_GEN2
 	select PM_RCAR if PM || SMP
 	select RENESAS_IRQC
 	select SYS_SUPPORTS_SH_CMT
+	select PCI_DOMAINS if PCI
 
 config ARCH_RMOBILE
 	bool
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 7d68eba..b55cac0 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -35,6 +35,7 @@ cpu-y				:= platsmp.o headsmp.o
 
 # Shared SoC family objects
 obj-$(CONFIG_ARCH_RCAR_GEN2)	+= setup-rcar-gen2.o platsmp-apmu.o $(cpu-y)
+CFLAGS_setup-rcar-gen2.o	+= -march=armv7-a
 
 # SMP objects
 smp-y				:= $(cpu-y)
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
index de95181..6d949f1 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -1229,8 +1229,15 @@ static void __init eva_init(void)
 	static struct pm_domain_device domain_devices[] __initdata = {
 		{ "A4LC", &lcdc0_device },
 		{ "A4LC", &hdmi_lcdc_device },
+		{ "A4MP", &hdmi_device },
+		{ "A4MP", &fsi_device },
+		{ "A4R",  &ceu0_device },
+		{ "A4S",  &sh_eth_device },
+		{ "A3SP", &pwm_device },
+		{ "A3SP", &sdhi0_device },
+		{ "A3SP", &sh_mmcif_device },
 	};
-	struct platform_device *usb = NULL;
+	struct platform_device *usb = NULL, *sdhi1 = NULL;
 
 	regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
 				     ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
@@ -1299,6 +1306,7 @@ static void __init eva_init(void)
 
 		platform_device_register(&vcc_sdhi1);
 		platform_device_register(&sdhi1_device);
+		sdhi1 = &sdhi1_device;
 	}
 
 
@@ -1319,6 +1327,8 @@ static void __init eva_init(void)
 				       ARRAY_SIZE(domain_devices));
 	if (usb)
 		rmobile_add_device_to_domain("A3SP", usb);
+	if (sdhi1)
+		rmobile_add_device_to_domain("A3SP", sdhi1);
 
 	r8a7740_pm_init();
 }
diff --git a/arch/arm/mach-shmobile/board-kzm9g-reference.c b/arch/arm/mach-shmobile/board-kzm9g-reference.c
index f2ef759b..2e82e44 100644
--- a/arch/arm/mach-shmobile/board-kzm9g-reference.c
+++ b/arch/arm/mach-shmobile/board-kzm9g-reference.c
@@ -39,6 +39,13 @@ static void __init kzm_init(void)
 #endif
 }
 
+#define RESCNT2 IOMEM(0xe6188020)
+static void kzm9g_restart(enum reboot_mode mode, const char *cmd)
+{
+	/* Do soft power on reset */
+	writel((1 << 31), RESCNT2);
+}
+
 static const char *kzm9g_boards_compat_dt[] __initdata = {
 	"renesas,kzm9g-reference",
 	NULL,
@@ -50,5 +57,6 @@ DT_MACHINE_START(KZM9G_DT, "kzm9g-reference")
 	.init_early	= shmobile_init_delay,
 	.init_machine	= kzm_init,
 	.init_late	= shmobile_init_late,
+	.restart	= kzm9g_restart,
 	.dt_compat	= kzm9g_boards_compat_dt,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/common.h b/arch/arm/mach-shmobile/common.h
index 72087c7..309025e 100644
--- a/arch/arm/mach-shmobile/common.h
+++ b/arch/arm/mach-shmobile/common.h
@@ -19,11 +19,6 @@ extern void shmobile_boot_scu(void);
 extern void shmobile_smp_scu_prepare_cpus(unsigned int max_cpus);
 extern void shmobile_smp_scu_cpu_die(unsigned int cpu);
 extern int shmobile_smp_scu_cpu_kill(unsigned int cpu);
-extern void shmobile_smp_apmu_prepare_cpus(unsigned int max_cpus);
-extern int shmobile_smp_apmu_boot_secondary(unsigned int cpu,
-					    struct task_struct *idle);
-extern void shmobile_smp_apmu_cpu_die(unsigned int cpu);
-extern int shmobile_smp_apmu_cpu_kill(unsigned int cpu);
 struct clk;
 extern int shmobile_clk_init(void);
 extern void shmobile_handle_irq_intc(struct pt_regs *);
diff --git a/arch/arm/mach-shmobile/platsmp-apmu.c b/arch/arm/mach-shmobile/platsmp-apmu.c
index 2c06810..f483b56 100644
--- a/arch/arm/mach-shmobile/platsmp-apmu.c
+++ b/arch/arm/mach-shmobile/platsmp-apmu.c
@@ -1,6 +1,7 @@
 /*
  * SMP support for SoCs with APMU
  *
+ * Copyright (C) 2014  Renesas Electronics Corporation
  * Copyright (C) 2013  Magnus Damm
  *
  * This program is free software; you can redistribute it and/or modify
@@ -22,6 +23,7 @@
 #include <asm/smp_plat.h>
 #include <asm/suspend.h>
 #include "common.h"
+#include "platsmp-apmu.h"
 
 static struct {
 	void __iomem *iomem;
@@ -83,28 +85,15 @@ static void apmu_init_cpu(struct resource *res, int cpu, int bit)
 	pr_debug("apmu ioremap %d %d %pr\n", cpu, bit, res);
 }
 
-static struct {
-	struct resource iomem;
-	int cpus[4];
-} apmu_config[] = {
-	{
-		.iomem = DEFINE_RES_MEM(0xe6152000, 0x88),
-		.cpus = { 0, 1, 2, 3 },
-	},
-	{
-		.iomem = DEFINE_RES_MEM(0xe6151000, 0x88),
-		.cpus = { 0x100, 0x101, 0x102, 0x103 },
-	}
-};
-
-static void apmu_parse_cfg(void (*fn)(struct resource *res, int cpu, int bit))
+static void apmu_parse_cfg(void (*fn)(struct resource *res, int cpu, int bit),
+			   struct rcar_apmu_config *apmu_config, int num)
 {
 	u32 id;
 	int k;
 	int bit, index;
 	bool is_allowed;
 
-	for (k = 0; k < ARRAY_SIZE(apmu_config); k++) {
+	for (k = 0; k < num; k++) {
 		/* only enable the cluster that includes the boot CPU */
 		is_allowed = false;
 		for (bit = 0; bit < ARRAY_SIZE(apmu_config[k].cpus); bit++) {
@@ -128,14 +117,16 @@ static void apmu_parse_cfg(void (*fn)(struct resource *res, int cpu, int bit))
 	}
 }
 
-void __init shmobile_smp_apmu_prepare_cpus(unsigned int max_cpus)
+void __init shmobile_smp_apmu_prepare_cpus(unsigned int max_cpus,
+					   struct rcar_apmu_config *apmu_config,
+					   int num)
 {
 	/* install boot code shared by all CPUs */
 	shmobile_boot_fn = virt_to_phys(shmobile_smp_boot);
 	shmobile_boot_arg = MPIDR_HWID_BITMASK;
 
 	/* perform per-cpu setup */
-	apmu_parse_cfg(apmu_init_cpu);
+	apmu_parse_cfg(apmu_init_cpu, apmu_config, num);
 }
 
 #ifdef CONFIG_SMP
diff --git a/arch/arm/mach-shmobile/platsmp-apmu.h b/arch/arm/mach-shmobile/platsmp-apmu.h
new file mode 100644
index 0000000..76512c9
--- /dev/null
+++ b/arch/arm/mach-shmobile/platsmp-apmu.h
@@ -0,0 +1,32 @@
+/*
+ * rmobile apmu definition
+ *
+ * Copyright (C) 2014  Renesas Electronics Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef PLATSMP_APMU_H
+#define PLATSMP_APMU_H
+
+struct rcar_apmu_config {
+	struct resource iomem;
+	int cpus[4];
+};
+
+extern void shmobile_smp_apmu_prepare_cpus(unsigned int max_cpus,
+					   struct rcar_apmu_config *apmu_config,
+					   int num);
+extern int shmobile_smp_apmu_boot_secondary(unsigned int cpu,
+					    struct task_struct *idle);
+extern void shmobile_smp_apmu_cpu_die(unsigned int cpu);
+extern int shmobile_smp_apmu_cpu_kill(unsigned int cpu);
+
+#endif /* PLATSMP_APMU_H */
diff --git a/arch/arm/mach-shmobile/pm-r8a7740.c b/arch/arm/mach-shmobile/pm-r8a7740.c
index e3f1464..ac2eecd 100644
--- a/arch/arm/mach-shmobile/pm-r8a7740.c
+++ b/arch/arm/mach-shmobile/pm-r8a7740.c
@@ -14,10 +14,10 @@
 #include "pm-rmobile.h"
 
 #if defined(CONFIG_PM) && !defined(CONFIG_ARCH_MULTIPLATFORM)
-static int r8a7740_pd_a4s_suspend(void)
+static int r8a7740_pd_a3sm_suspend(void)
 {
 	/*
-	 * The A4S domain contains the CPU core and therefore it should
+	 * The A3SM domain contains the CPU core and therefore it should
 	 * only be turned off if the CPU is not in use.
 	 */
 	return -EBUSY;
@@ -32,29 +32,65 @@ static int r8a7740_pd_a3sp_suspend(void)
 	return console_suspend_enabled ? 0 : -EBUSY;
 }
 
+static int r8a7740_pd_d4_suspend(void)
+{
+	/*
+	 * The D4 domain contains the Coresight-ETM hardware block and
+	 * therefore it should only be turned off if the debug module is
+	 * not in use.
+	 */
+	return -EBUSY;
+}
+
 static struct rmobile_pm_domain r8a7740_pm_domains[] = {
 	{
 		.genpd.name	= "A4LC",
 		.bit_shift	= 1,
 	}, {
+		.genpd.name	= "A4MP",
+		.bit_shift	= 2,
+	}, {
+		.genpd.name	= "D4",
+		.bit_shift	= 3,
+		.gov		= &pm_domain_always_on_gov,
+		.suspend	= r8a7740_pd_d4_suspend,
+	}, {
+		.genpd.name	= "A4R",
+		.bit_shift	= 5,
+	}, {
+		.genpd.name	= "A3RV",
+		.bit_shift	= 6,
+	}, {
 		.genpd.name	= "A4S",
 		.bit_shift	= 10,
-		.gov		= &pm_domain_always_on_gov,
 		.no_debug	= true,
-		.suspend	= r8a7740_pd_a4s_suspend,
 	}, {
 		.genpd.name	= "A3SP",
 		.bit_shift	= 11,
 		.gov		= &pm_domain_always_on_gov,
 		.no_debug	= true,
 		.suspend	= r8a7740_pd_a3sp_suspend,
+	}, {
+		.genpd.name	= "A3SM",
+		.bit_shift	= 12,
+		.gov		= &pm_domain_always_on_gov,
+		.suspend	= r8a7740_pd_a3sm_suspend,
+	}, {
+		.genpd.name	= "A3SG",
+		.bit_shift	= 13,
+	}, {
+		.genpd.name	= "A4SU",
+		.bit_shift	= 20,
 	},
 };
 
 void __init r8a7740_init_pm_domains(void)
 {
 	rmobile_init_domains(r8a7740_pm_domains, ARRAY_SIZE(r8a7740_pm_domains));
+	pm_genpd_add_subdomain_names("A4R", "A3RV");
 	pm_genpd_add_subdomain_names("A4S", "A3SP");
+	pm_genpd_add_subdomain_names("A4S", "A3SM");
+	pm_genpd_add_subdomain_names("A4S", "A3SG");
 }
 #endif /* CONFIG_PM && !CONFIG_ARCH_MULTIPLATFORM */
 
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index fe15dd2..79ad93d 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -67,6 +67,7 @@ static struct map_desc r8a7740_io_desc[] __initdata = {
 
 void __init r8a7740_map_io(void)
 {
+	debug_ll_io_init();
 	iotable_init(r8a7740_io_desc, ARRAY_SIZE(r8a7740_io_desc));
 }
 
@@ -742,6 +743,12 @@ static void r8a7740_i2c_workaround(struct platform_device *pdev)
 void __init r8a7740_add_standard_devices(void)
 {
 	static struct pm_domain_device domain_devices[] __initdata = {
+		{ "A4R",  &tmu0_device },
+		{ "A4R",  &i2c0_device },
+		{ "A4S",  &irqpin0_device },
+		{ "A4S",  &irqpin1_device },
+		{ "A4S",  &irqpin2_device },
+		{ "A4S",  &irqpin3_device },
 		{ "A3SP", &scif0_device },
 		{ "A3SP", &scif1_device },
 		{ "A3SP", &scif2_device },
@@ -752,6 +759,11 @@ void __init r8a7740_add_standard_devices(void)
 		{ "A3SP", &scif7_device },
 		{ "A3SP", &scif8_device },
 		{ "A3SP", &i2c1_device },
+		{ "A3SP", &ipmmu_device },
+		{ "A3SP", &dma0_device },
+		{ "A3SP", &dma1_device },
+		{ "A3SP", &dma2_device },
+		{ "A3SP", &usb_dma_device },
 	};
 
 	/* I2C work-around */
diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c
index 645d7cc..6156d17 100644
--- a/arch/arm/mach-shmobile/setup-r8a7779.c
+++ b/arch/arm/mach-shmobile/setup-r8a7779.c
@@ -66,6 +66,7 @@ static struct map_desc r8a7779_io_desc[] __initdata = {
 
 void __init r8a7779_map_io(void)
 {
+	debug_ll_io_init();
 	iotable_init(r8a7779_io_desc, ARRAY_SIZE(r8a7779_io_desc));
 }
 
diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c
index a669377..3dd6edd 100644
--- a/arch/arm/mach-shmobile/setup-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c
@@ -3,6 +3,7 @@
  *
  * Copyright (C) 2013  Renesas Solutions Corp.
  * Copyright (C) 2013  Magnus Damm
+ * Copyright (C) 2014  Ulrich Hecht
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -20,6 +21,7 @@
 #include <linux/dma-contiguous.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
+#include <linux/of.h>
 #include <linux/of_fdt.h>
 #include <asm/mach/arch.h>
 #include "common.h"
@@ -50,37 +52,61 @@ void __init rcar_gen2_timer_init(void)
 {
 #if defined(CONFIG_ARM_ARCH_TIMER) || defined(CONFIG_COMMON_CLK)
 	u32 mode = rcar_gen2_read_mode_pins();
+	bool is_e2 = (bool)of_find_compatible_node(NULL, NULL,
+		"renesas,r8a7794");
 #endif
 #ifdef CONFIG_ARM_ARCH_TIMER
 	void __iomem *base;
 	int extal_mhz = 0;
 	u32 freq;
 
-	/* At Linux boot time the r8a7790 arch timer comes up
-	 * with the counter disabled. Moreover, it may also report
-	 * a potentially incorrect fixed 13 MHz frequency. To be
-	 * correct these registers need to be updated to use the
-	 * frequency EXTAL / 2 which can be determined by the MD pins.
-	 */
-
-	switch (mode & (MD(14) | MD(13))) {
-	case 0:
-		extal_mhz = 15;
-		break;
-	case MD(13):
-		extal_mhz = 20;
-		break;
-	case MD(14):
-		extal_mhz = 26;
-		break;
-	case MD(13) | MD(14):
-		extal_mhz = 30;
-		break;
+	if (is_e2) {
+		freq = 260000000 / 8;	/* ZS / 8 */
+		/* CNTVOFF has to be initialized either from non-secure
+		 * Hypervisor mode or secure Monitor mode with SCR.NS==1.
+		 * If TrustZone is enabled then it should be handled by the
+		 * secure code.
+		 */
+		asm volatile(
+		"	cps	0x16\n"
+		"	mrc	p15, 0, r1, c1, c1, 0\n"
+		"	orr	r0, r1, #1\n"
+		"	mcr	p15, 0, r0, c1, c1, 0\n"
+		"	isb\n"
+		"	mov	r0, #0\n"
+		"	mcrr	p15, 4, r0, r0, c14\n"
+		"	isb\n"
+		"	mcr	p15, 0, r1, c1, c1, 0\n"
+		"	isb\n"
+		"	cps	0x13\n"
+			: : : "r0", "r1");
+	} else {
+		/* At Linux boot time the r8a7790 arch timer comes up
+		 * with the counter disabled. Moreover, it may also report
+		 * a potentially incorrect fixed 13 MHz frequency. To be
+		 * correct these registers need to be updated to use the
+		 * frequency EXTAL / 2 which can be determined by the MD pins.
+		 */
+
+		switch (mode & (MD(14) | MD(13))) {
+		case 0:
+			extal_mhz = 15;
+			break;
+		case MD(13):
+			extal_mhz = 20;
+			break;
+		case MD(14):
+			extal_mhz = 26;
+			break;
+		case MD(13) | MD(14):
+			extal_mhz = 30;
+			break;
+		}
+
+		/* The arch timer frequency equals EXTAL / 2 */
+		freq = extal_mhz * (1000000 / 2);
 	}
 
-	/* The arch timer frequency equals EXTAL / 2 */
-	freq = extal_mhz * (1000000 / 2);
-
 	/* Remap "armgcnt address map" space */
 	base = ioremap(0xe6080000, PAGE_SIZE);
 
diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c
index ca2b80b..458a2cf 100644
--- a/arch/arm/mach-shmobile/setup-sh7372.c
+++ b/arch/arm/mach-shmobile/setup-sh7372.c
@@ -56,6 +56,7 @@ static struct map_desc sh7372_io_desc[] __initdata = {
 
 void __init sh7372_map_io(void)
 {
+	debug_ll_io_init();
 	iotable_init(sh7372_io_desc, ARRAY_SIZE(sh7372_io_desc));
 }
 
@@ -1008,6 +1009,7 @@ DT_MACHINE_START(SH7372_DT, "Generic SH7372 (Flattened Device Tree)")
 	.init_irq	= sh7372_init_irq,
 	.handle_irq	= shmobile_handle_irq_intc,
 	.init_machine	= sh7372_add_standard_devices_dt,
+	.init_late	= shmobile_init_late,
 	.dt_compat	= sh7372_boards_compat_dt,
 MACHINE_END
 
diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c
index 1ff4bd6..93ebe34 100644
--- a/arch/arm/mach-shmobile/setup-sh73a0.c
+++ b/arch/arm/mach-shmobile/setup-sh73a0.c
@@ -55,6 +55,7 @@ static struct map_desc sh73a0_io_desc[] __initdata = {
 
 void __init sh73a0_map_io(void)
 {
+	debug_ll_io_init();
 	iotable_init(sh73a0_io_desc, ARRAY_SIZE(sh73a0_io_desc));
 }
 
@@ -786,6 +787,13 @@ void __init sh73a0_add_standard_devices_dt(void)
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
+#define RESCNT2 IOMEM(0xe6188020)
+static void sh73a0_restart(enum reboot_mode mode, const char *cmd)
+{
+	/* Do soft power on reset */
+	writel((1 << 31), RESCNT2);
+}
+
 static const char *sh73a0_boards_compat_dt[] __initdata = {
 	"renesas,sh73a0",
 	NULL,
@@ -797,6 +805,7 @@ DT_MACHINE_START(SH73A0_DT, "Generic SH73A0 (Flattened Device Tree)")
 	.init_early	= shmobile_init_delay,
 	.init_machine	= sh73a0_add_standard_devices_dt,
 	.init_late	= shmobile_init_late,
+	.restart	= sh73a0_restart,
 	.dt_compat	= sh73a0_boards_compat_dt,
 MACHINE_END
 #endif /* CONFIG_USE_OF */
diff --git a/arch/arm/mach-shmobile/smp-r8a7790.c b/arch/arm/mach-shmobile/smp-r8a7790.c
index 2311694..9c3da13 100644
--- a/arch/arm/mach-shmobile/smp-r8a7790.c
+++ b/arch/arm/mach-shmobile/smp-r8a7790.c
@@ -21,6 +21,7 @@
 #include <asm/smp_plat.h>
 
 #include "common.h"
+#include "platsmp-apmu.h"
 #include "pm-rcar.h"
 #include "r8a7790.h"
 
@@ -34,10 +35,23 @@ static struct rcar_sysc_ch r8a7790_ca7_scu = {
 	.isr_bit = 21, /* CA7-SCU */
 };
 
+static struct rcar_apmu_config r8a7790_apmu_config[] = {
+	{
+		.iomem = DEFINE_RES_MEM(0xe6152000, 0x88),
+		.cpus = { 0, 1, 2, 3 },
+	},
+	{
+		.iomem = DEFINE_RES_MEM(0xe6151000, 0x88),
+		.cpus = { 0x100, 0x0101, 0x102, 0x103 },
+	}
+};
+
 static void __init r8a7790_smp_prepare_cpus(unsigned int max_cpus)
 {
 	/* let APMU code install data related to shmobile_boot_vector */
-	shmobile_smp_apmu_prepare_cpus(max_cpus);
+	shmobile_smp_apmu_prepare_cpus(max_cpus,
+				       r8a7790_apmu_config,
+				       ARRAY_SIZE(r8a7790_apmu_config));
 
 	/* turn on power to SCU */
 	r8a7790_pm_init();
diff --git a/arch/arm/mach-shmobile/smp-r8a7791.c b/arch/arm/mach-shmobile/smp-r8a7791.c
index f743386..7e49e0a 100644
--- a/arch/arm/mach-shmobile/smp-r8a7791.c
+++ b/arch/arm/mach-shmobile/smp-r8a7791.c
@@ -21,13 +21,23 @@
 #include <asm/smp_plat.h>
 
 #include "common.h"
+#include "platsmp-apmu.h"
 #include "r8a7791.h"
 #include "rcar-gen2.h"
 
+static struct rcar_apmu_config r8a7791_apmu_config[] = {
+	{
+		.iomem = DEFINE_RES_MEM(0xe6152000, 0x88),
+		.cpus = { 0, 1 },
+	}
+};
+
 static void __init r8a7791_smp_prepare_cpus(unsigned int max_cpus)
 {
 	/* let APMU code install data related to shmobile_boot_vector */
-	shmobile_smp_apmu_prepare_cpus(max_cpus);
+	shmobile_smp_apmu_prepare_cpus(max_cpus,
+				       r8a7791_apmu_config,
+				       ARRAY_SIZE(r8a7791_apmu_config));
 
 	r8a7791_pm_init();
 }
diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c
index 1081b76..f1d027a 100644
--- a/arch/arm/mach-shmobile/timer.c
+++ b/arch/arm/mach-shmobile/timer.c
@@ -40,6 +40,7 @@ void __init shmobile_init_delay(void)
 	struct device_node *np, *cpus;
 	bool is_a7_a8_a9 = false;
 	bool is_a15 = false;
+	bool has_arch_timer = false;
 	u32 max_freq = 0;
 
 	cpus = of_find_node_by_path("/cpus");
@@ -52,12 +53,16 @@ void __init shmobile_init_delay(void)
 		if (!of_property_read_u32(np, "clock-frequency", &freq))
 			max_freq = max(max_freq, freq);
 
-		if (of_device_is_compatible(np, "arm,cortex-a7") ||
-		    of_device_is_compatible(np, "arm,cortex-a8") ||
-		    of_device_is_compatible(np, "arm,cortex-a9"))
+		if (of_device_is_compatible(np, "arm,cortex-a8") ||
+		    of_device_is_compatible(np, "arm,cortex-a9")) {
 			is_a7_a8_a9 = true;
-		else if (of_device_is_compatible(np, "arm,cortex-a15"))
+		} else if (of_device_is_compatible(np, "arm,cortex-a7")) {
+			is_a7_a8_a9 = true;
+			has_arch_timer = true;
+		} else if (of_device_is_compatible(np, "arm,cortex-a15")) {
 			is_a15 = true;
+			has_arch_timer = true;
+		}
 	}
 
 	of_node_put(cpus);
@@ -65,10 +70,12 @@ void __init shmobile_init_delay(void)
 	if (!max_freq)
 		return;
 
-	if (is_a7_a8_a9)
-		shmobile_setup_delay_hz(max_freq, 1, 3);
-	else if (is_a15 && !IS_ENABLED(CONFIG_ARM_ARCH_TIMER))
-		shmobile_setup_delay_hz(max_freq, 2, 4);
+	if (!has_arch_timer || !IS_ENABLED(CONFIG_ARM_ARCH_TIMER)) {
+		if (is_a7_a8_a9)
+			shmobile_setup_delay_hz(max_freq, 1, 3);
+		else if (is_a15)
+			shmobile_setup_delay_hz(max_freq, 2, 4);
+	}
 }
 
 static void __init shmobile_late_time_init(void)
diff --git a/arch/arm/mach-socfpga/core.h b/arch/arm/mach-socfpga/core.h
index 60c443d..483cb46 100644
--- a/arch/arm/mach-socfpga/core.h
+++ b/arch/arm/mach-socfpga/core.h
@@ -21,6 +21,7 @@
 #define __MACH_CORE_H
 
 #define SOCFPGA_RSTMGR_CTRL	0x04
+#define SOCFPGA_RSTMGR_MODMPURST	0x10
 #define SOCFPGA_RSTMGR_MODPERRST	0x14
 #define SOCFPGA_RSTMGR_BRGMODRST	0x1c
 
@@ -28,6 +29,8 @@
 #define RSTMGR_CTRL_SWCOLDRSTREQ	0x1	/* Cold Reset */
 #define RSTMGR_CTRL_SWWARMRSTREQ	0x2	/* Warm Reset */
 
+#define RSTMGR_MPUMODRST_CPU1		0x2     /* CPU1 Reset */
+
 extern void socfpga_secondary_startup(void);
 extern void __iomem *socfpga_scu_base_addr;
 
diff --git a/arch/arm/mach-socfpga/platsmp.c b/arch/arm/mach-socfpga/platsmp.c
index 16ca97b..c64d89b 100644
--- a/arch/arm/mach-socfpga/platsmp.c
+++ b/arch/arm/mach-socfpga/platsmp.c
@@ -34,17 +34,21 @@ static int socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle)
 	int trampoline_size = &secondary_trampoline_end - &secondary_trampoline;
 
 	if (socfpga_cpu1start_addr) {
+		/* This will put CPU #1 into reset. */
+		writel(RSTMGR_MPUMODRST_CPU1,
+		       rst_manager_base_addr + SOCFPGA_RSTMGR_MODMPURST);
+
 		memcpy(phys_to_virt(0), &secondary_trampoline, trampoline_size);
 
-		__raw_writel(virt_to_phys(socfpga_secondary_startup),
-			(sys_manager_base_addr + (socfpga_cpu1start_addr & 0x000000ff)));
+		writel(virt_to_phys(socfpga_secondary_startup),
+		       sys_manager_base_addr + (socfpga_cpu1start_addr & 0x000000ff));
 
 		flush_cache_all();
 		smp_wmb();
 		outer_clean_range(0, trampoline_size);
 
-		/* This will release CPU #1 out of reset.*/
-		__raw_writel(0, rst_manager_base_addr + 0x10);
+		/* This will release CPU #1 out of reset. */
+		writel(0, rst_manager_base_addr + SOCFPGA_RSTMGR_MODMPURST);
 	}
 
 	return 0;
@@ -86,10 +90,9 @@ static void __init socfpga_smp_prepare_cpus(unsigned int max_cpus)
  */
 static void socfpga_cpu_die(unsigned int cpu)
 {
-	cpu_do_idle();
-
-	/* We should have never returned from idle */
-	panic("cpu %d unexpectedly exit from shutdown\n", cpu);
+	/* Do WFI. If we wake up early, go back into WFI */
+	while (1)
+		cpu_do_idle();
 }
 
 struct smp_operations socfpga_smp_ops __initdata = {
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 1aaa1e1..a77604f 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -42,4 +42,11 @@ config MACH_SUN8I
 	select MFD_SUN6I_PRCM
 	select RESET_CONTROLLER
 
+config MACH_SUN9I
+	bool "Allwinner (sun9i) SoCs support"
+	default ARCH_SUNXI
+	select ARCH_HAS_RESET_CONTROLLER
+	select ARM_GIC
+	select RESET_CONTROLLER
+
 endif
diff --git a/arch/arm/mach-sunxi/platsmp.c b/arch/arm/mach-sunxi/platsmp.c
index c53077b..e44d028 100644
--- a/arch/arm/mach-sunxi/platsmp.c
+++ b/arch/arm/mach-sunxi/platsmp.c
@@ -116,7 +116,7 @@ static int sun6i_smp_boot_secondary(unsigned int cpu,
 	return 0;
 }
 
-struct smp_operations sun6i_smp_ops __initdata = {
+static struct smp_operations sun6i_smp_ops __initdata = {
 	.smp_prepare_cpus	= sun6i_smp_prepare_cpus,
 	.smp_boot_secondary	= sun6i_smp_boot_secondary,
 };
diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c
index d7598ae..1f98675 100644
--- a/arch/arm/mach-sunxi/sunxi.c
+++ b/arch/arm/mach-sunxi/sunxi.c
@@ -63,3 +63,12 @@ static const char * const sun8i_board_dt_compat[] = {
 DT_MACHINE_START(SUN8I_DT, "Allwinner sun8i (A23) Family")
 	.dt_compat	= sun8i_board_dt_compat,
 MACHINE_END
+
+static const char * const sun9i_board_dt_compat[] = {
+	"allwinner,sun9i-a80",
+	NULL,
+};
+
+DT_MACHINE_START(SUN9I_DT, "Allwinner sun9i Family")
+	.dt_compat	= sun9i_board_dt_compat,
+MACHINE_END
diff --git a/arch/arm/mach-tegra/cpuidle-tegra114.c b/arch/arm/mach-tegra/cpuidle-tegra114.c
index e3ebdce..425b6c8 100644
--- a/arch/arm/mach-tegra/cpuidle-tegra114.c
+++ b/arch/arm/mach-tegra/cpuidle-tegra114.c
@@ -49,7 +49,7 @@ static int tegra114_idle_power_down(struct cpuidle_device *dev,
 	call_firmware_op(prepare_idle);
 
 	/* Do suspend by ourselves if the firmware does not implement it */
-	if (call_firmware_op(do_idle) == -ENOSYS)
+	if (call_firmware_op(do_idle, 0) == -ENOSYS)
 		cpu_suspend(0, tegra30_sleep_cpu_secondary_finish);
 
 	clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &dev->cpu);
diff --git a/arch/arm/mach-u300/dummyspichip.c b/arch/arm/mach-u300/dummyspichip.c
index ec0283c..1319968 100644
--- a/arch/arm/mach-u300/dummyspichip.c
+++ b/arch/arm/mach-u300/dummyspichip.c
@@ -80,8 +80,8 @@ static ssize_t dummy_looptest(struct device *dev,
 		"in 8bit mode\n");
 	status = spi_w8r8(spi, 0xAA);
 	if (status < 0)
-		pr_warning("Siple test 1: FAILURE: spi_write_then_read "
-			   "failed with status %d\n", status);
+		pr_warn("Simple test 1: FAILURE: spi_write_then_read failed with status %d\n",
+			status);
 	else
 		pr_info("Simple test 1: SUCCESS!\n");
 
@@ -89,8 +89,8 @@ static ssize_t dummy_looptest(struct device *dev,
 		"in 8bit mode (full FIFO)\n");
 	status = spi_write_then_read(spi, &txbuf[0], 8, &rxbuf[0], 8);
 	if (status < 0)
-		pr_warning("Simple test 2: FAILURE: spi_write_then_read() "
-			   "failed with status %d\n", status);
+		pr_warn("Simple test 2: FAILURE: spi_write_then_read() failed with status %d\n",
+			status);
 	else
 		pr_info("Simple test 2: SUCCESS!\n");
 
@@ -98,8 +98,8 @@ static ssize_t dummy_looptest(struct device *dev,
 		"in 8bit mode (see if we overflow FIFO)\n");
 	status = spi_write_then_read(spi, &txbuf[0], 14, &rxbuf[0], 14);
 	if (status < 0)
-		pr_warning("Simple test 3: FAILURE: failed with status %d "
-			   "(probably FIFO overrun)\n", status);
+		pr_warn("Simple test 3: FAILURE: failed with status %d (probably FIFO overrun)\n",
+			status);
 	else
 		pr_info("Simple test 3: SUCCESS!\n");
 
@@ -107,14 +107,14 @@ static ssize_t dummy_looptest(struct device *dev,
 		"bytes garbage with spi_read() in 8bit mode\n");
 	status = spi_write(spi, &txbuf[0], 8);
 	if (status < 0)
-		pr_warning("Simple test 4 step 1: FAILURE: spi_write() "
-			   "failed with status %d\n", status);
+		pr_warn("Simple test 4 step 1: FAILURE: spi_write() failed with status %d\n",
+			status);
 	else
 		pr_info("Simple test 4 step 1: SUCCESS!\n");
 	status = spi_read(spi, &rxbuf[0], 8);
 	if (status < 0)
-		pr_warning("Simple test 4 step 2: FAILURE: spi_read() "
-			   "failed with status %d\n", status);
+		pr_warn("Simple test 4 step 2: FAILURE: spi_read() failed with status %d\n",
+			status);
 	else
 		pr_info("Simple test 4 step 2: SUCCESS!\n");
 
@@ -122,16 +122,14 @@ static ssize_t dummy_looptest(struct device *dev,
 		"14 bytes garbage with spi_read() in 8bit mode\n");
 	status = spi_write(spi, &txbuf[0], 14);
 	if (status < 0)
-		pr_warning("Simple test 5 step 1: FAILURE: spi_write() "
-			   "failed with status %d (probably FIFO overrun)\n",
-			   status);
+		pr_warn("Simple test 5 step 1: FAILURE: spi_write() failed with status %d (probably FIFO overrun)\n",
+			status);
 	else
 		pr_info("Simple test 5 step 1: SUCCESS!\n");
 	status = spi_read(spi, &rxbuf[0], 14);
 	if (status < 0)
-		pr_warning("Simple test 5 step 2: FAILURE: spi_read() "
-			   "failed with status %d (probably FIFO overrun)\n",
-			   status);
+		pr_warn("Simple test 5 step 2: FAILURE: spi_read() failed with status %d (probably FIFO overrun)\n",
+			status);
 	else
 		pr_info("Simple test 5: SUCCESS!\n");
 
@@ -140,16 +138,14 @@ static ssize_t dummy_looptest(struct device *dev,
 		DMA_TEST_SIZE, DMA_TEST_SIZE);
 	status = spi_write(spi, &bigtxbuf_virtual[0], DMA_TEST_SIZE);
 	if (status < 0)
-		pr_warning("Simple test 6 step 1: FAILURE: spi_write() "
-			   "failed with status %d (probably FIFO overrun)\n",
-			   status);
+		pr_warn("Simple test 6 step 1: FAILURE: spi_write() failed with status %d (probably FIFO overrun)\n",
+			status);
 	else
 		pr_info("Simple test 6 step 1: SUCCESS!\n");
 	status = spi_read(spi, &bigrxbuf_virtual[0], DMA_TEST_SIZE);
 	if (status < 0)
-		pr_warning("Simple test 6 step 2: FAILURE: spi_read() "
-			   "failed with status %d (probably FIFO overrun)\n",
-			   status);
+		pr_warn("Simple test 6 step 2: FAILURE: spi_read() failed with status %d (probably FIFO overrun)\n",
+			status);
 	else
 		pr_info("Simple test 6: SUCCESS!\n");
 
@@ -169,18 +165,17 @@ static ssize_t dummy_looptest(struct device *dev,
 		pr_info("Simple test 7: SUCCESS! (expected failure with "
 			"status EIO)\n");
 	else if (status < 0)
-		pr_warning("Siple test 7: FAILURE: spi_write_then_read "
-			   "failed with status %d\n", status);
+		pr_warn("Simple test 7: FAILURE: spi_write_then_read failed with status %d\n",
+			status);
 	else
-		pr_warning("Siple test 7: FAILURE: spi_write_then_read "
-			   "succeeded but it was expected to fail!\n");
+		pr_warn("Simple test 7: FAILURE: spi_write_then_read succeeded but it was expected to fail!\n");
 
 	pr_info("Simple test 8: write 8 bytes, read back 8 bytes garbage "
 		"in 16bit mode (full FIFO)\n");
 	status = spi_write_then_read(spi, &txbuf[0], 8, &rxbuf[0], 8);
 	if (status < 0)
-		pr_warning("Simple test 8: FAILURE: spi_write_then_read() "
-			   "failed with status %d\n", status);
+		pr_warn("Simple test 8: FAILURE: spi_write_then_read() failed with status %d\n",
+			status);
 	else
 		pr_info("Simple test 8: SUCCESS!\n");
 
@@ -188,8 +183,8 @@ static ssize_t dummy_looptest(struct device *dev,
 		"in 16bit mode (see if we overflow FIFO)\n");
 	status = spi_write_then_read(spi, &txbuf[0], 14, &rxbuf[0], 14);
 	if (status < 0)
-		pr_warning("Simple test 9: FAILURE: failed with status %d "
-			   "(probably FIFO overrun)\n", status);
+		pr_warn("Simple test 9: FAILURE: failed with status %d (probably FIFO overrun)\n",
+			status);
 	else
 		pr_info("Simple test 9: SUCCESS!\n");
 
@@ -198,17 +193,15 @@ static ssize_t dummy_looptest(struct device *dev,
 	       DMA_TEST_SIZE, DMA_TEST_SIZE);
 	status = spi_write(spi, &bigtxbuf_virtual[0], DMA_TEST_SIZE);
 	if (status < 0)
-		pr_warning("Simple test 10 step 1: FAILURE: spi_write() "
-			   "failed with status %d (probably FIFO overrun)\n",
-			   status);
+		pr_warn("Simple test 10 step 1: FAILURE: spi_write() failed with status %d (probably FIFO overrun)\n",
+			status);
 	else
 		pr_info("Simple test 10 step 1: SUCCESS!\n");
 
 	status = spi_read(spi, &bigrxbuf_virtual[0], DMA_TEST_SIZE);
 	if (status < 0)
-		pr_warning("Simple test 10 step 2: FAILURE: spi_read() "
-			   "failed with status %d (probably FIFO overrun)\n",
-			   status);
+		pr_warn("Simple test 10 step 2: FAILURE: spi_read() failed with status %d (probably FIFO overrun)\n",
+			status);
 	else
 		pr_info("Simple test 10: SUCCESS!\n");
 
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 699e860..c9ac19b 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -32,6 +32,7 @@ config UX500_SOC_DB8500
 	select PINCTRL_AB8540
 	select REGULATOR
 	select REGULATOR_DB8500_PRCMU
+	select PM_GENERIC_DOMAINS if PM
 
 config MACH_MOP500
 	bool "U8500 Development platform, MOP500 versions"
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index 9741de95..4418a50 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -9,5 +9,6 @@ obj-$(CONFIG_MACH_MOP500)	+= board-mop500-regulators.o \
 				board-mop500-audio.o
 obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
+obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o
 
 CFLAGS_hotplug.o		+= -march=armv7-a
diff --git a/arch/arm/mach-ux500/pm.c b/arch/arm/mach-ux500/pm.c
index b80a9a2..2cb587b 100644
--- a/arch/arm/mach-ux500/pm.c
+++ b/arch/arm/mach-ux500/pm.c
@@ -17,6 +17,7 @@
 #include <linux/platform_data/arm-ux500-pm.h>
 
 #include "db8500-regs.h"
+#include "pm_domains.h"
 
 /* ARM WFI Standby signal register */
 #define PRCM_ARM_WFI_STANDBY    (prcmu_base + 0x130)
@@ -191,4 +192,7 @@ void __init ux500_pm_init(u32 phy_base, u32 size)
 
 	/* Set up ux500 suspend callbacks. */
 	suspend_set_ops(UX500_SUSPEND_OPS);
+
+	/* Initialize ux500 power domains */
+	ux500_pm_domains_init();
 }
diff --git a/arch/arm/mach-ux500/pm_domains.c b/arch/arm/mach-ux500/pm_domains.c
new file mode 100644
index 0000000..0d4b5b4
--- /dev/null
+++ b/arch/arm/mach-ux500/pm_domains.c
@@ -0,0 +1,79 @@
+/*
+ * Copyright (C) 2014 Linaro Ltd.
+ *
+ * Author: Ulf Hansson <ulf.hansson@linaro.org>
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ * Implements PM domains using the generic PM domain for ux500.
+ */
+#include <linux/printk.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/pm_domain.h>
+
+#include <dt-bindings/arm/ux500_pm_domains.h>
+#include "pm_domains.h"
+
+static int pd_power_off(struct generic_pm_domain *domain)
+{
+	/*
+	 * Handle the gating of the PM domain regulator here.
+	 *
+	 * Drivers/subsystems handling devices in the PM domain needs to perform
+	 * register context save/restore from their respective runtime PM
+	 * callbacks, to be able to enable PM domain gating/ungating.
+	 */
+	return 0;
+}
+
+static int pd_power_on(struct generic_pm_domain *domain)
+{
+	/*
+	 * Handle the ungating of the PM domain regulator here.
+	 *
+	 * Drivers/subsystems handling devices in the PM domain needs to perform
+	 * register context save/restore from their respective runtime PM
+	 * callbacks, to be able to enable PM domain gating/ungating.
+	 */
+	return 0;
+}
+
+static struct generic_pm_domain ux500_pm_domain_vape = {
+	.name = "VAPE",
+	.power_off = pd_power_off,
+	.power_on = pd_power_on,
+};
+
+static struct generic_pm_domain *ux500_pm_domains[NR_DOMAINS] = {
+	[DOMAIN_VAPE] = &ux500_pm_domain_vape,
+};
+
+static struct of_device_id ux500_pm_domain_matches[] = {
+	{ .compatible = "stericsson,ux500-pm-domains", },
+	{ },
+};
+
+int __init ux500_pm_domains_init(void)
+{
+	struct device_node *np;
+	struct genpd_onecell_data *genpd_data;
+	int i;
+
+	np = of_find_matching_node(NULL, ux500_pm_domain_matches);
+	if (!np)
+		return -ENODEV;
+
+	genpd_data = kzalloc(sizeof(*genpd_data), GFP_KERNEL);
+	if (!genpd_data)
+		return -ENOMEM;
+
+	genpd_data->domains = ux500_pm_domains;
+	genpd_data->num_domains = ARRAY_SIZE(ux500_pm_domains);
+
+	for (i = 0; i < ARRAY_SIZE(ux500_pm_domains); ++i)
+		pm_genpd_init(ux500_pm_domains[i], NULL, false);
+
+	of_genpd_add_provider_onecell(np, genpd_data);
+	return 0;
+}
diff --git a/arch/arm/mach-ux500/pm_domains.h b/arch/arm/mach-ux500/pm_domains.h
new file mode 100644
index 0000000..263d3ba
--- /dev/null
+++ b/arch/arm/mach-ux500/pm_domains.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2014 Linaro Ltd.
+ *
+ * Author: Ulf Hansson <ulf.hansson@linaro.org>
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef __MACH_UX500_PM_DOMAINS_H
+#define __MACH_UX500_PM_DOMAINS_H
+
+#ifdef CONFIG_PM_GENERIC_DOMAINS
+extern int __init ux500_pm_domains_init(void);
+#else
+static inline int ux500_pm_domains_init(void) { return 0; }
+#endif
+
+#endif
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 7eb94e6..ab906b8 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -21,7 +21,7 @@ config CPU_ARM7TDMI
 
 # ARM720T
 config CPU_ARM720T
-	bool "Support ARM720T processor" if ARCH_INTEGRATOR
+	bool "Support ARM720T processor" if (ARCH_MULTI_V4T && ARCH_INTEGRATOR)
 	select CPU_32v4T
 	select CPU_ABRT_LV4T
 	select CPU_CACHE_V4
@@ -39,7 +39,7 @@ config CPU_ARM720T
 
 # ARM740T
 config CPU_ARM740T
-	bool "Support ARM740T processor" if ARCH_INTEGRATOR
+	bool "Support ARM740T processor" if (ARCH_MULTI_V4T && ARCH_INTEGRATOR)
 	depends on !MMU
 	select CPU_32v4T
 	select CPU_ABRT_LV4T
@@ -71,7 +71,7 @@ config CPU_ARM9TDMI
 
 # ARM920T
 config CPU_ARM920T
-	bool "Support ARM920T processor" if ARCH_INTEGRATOR
+	bool "Support ARM920T processor" if (ARCH_MULTI_V4T && ARCH_INTEGRATOR)
 	select CPU_32v4T
 	select CPU_ABRT_EV4T
 	select CPU_CACHE_V4WT
@@ -89,7 +89,7 @@ config CPU_ARM920T
 
 # ARM922T
 config CPU_ARM922T
-	bool "Support ARM922T processor" if ARCH_INTEGRATOR
+	bool "Support ARM922T processor" if (ARCH_MULTI_V4T && ARCH_INTEGRATOR)
 	select CPU_32v4T
 	select CPU_ABRT_EV4T
 	select CPU_CACHE_V4WT
@@ -127,7 +127,7 @@ config CPU_ARM925T
 
 # ARM926T
 config CPU_ARM926T
-	bool "Support ARM926T processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB
+	bool "Support ARM926T processor" if (!ARCH_MULTIPLATFORM || ARCH_MULTI_V5) && (ARCH_INTEGRATOR || MACH_REALVIEW_EB)
 	select CPU_32v5
 	select CPU_ABRT_EV5TJ
 	select CPU_CACHE_VIVT
@@ -163,7 +163,7 @@ config CPU_FA526
 
 # ARM940T
 config CPU_ARM940T
-	bool "Support ARM940T processor" if ARCH_INTEGRATOR
+	bool "Support ARM940T processor" if (ARCH_MULTI_V4T && ARCH_INTEGRATOR)
 	depends on !MMU
 	select CPU_32v4T
 	select CPU_ABRT_NOMMU
@@ -181,7 +181,7 @@ config CPU_ARM940T
 
 # ARM946E-S
 config CPU_ARM946E
-	bool "Support ARM946E-S processor" if ARCH_INTEGRATOR
+	bool "Support ARM946E-S processor" if (ARCH_MULTI_V5 && ARCH_INTEGRATOR)
 	depends on !MMU
 	select CPU_32v5
 	select CPU_ABRT_NOMMU
@@ -198,7 +198,7 @@ config CPU_ARM946E
 
 # ARM1020 - needs validating
 config CPU_ARM1020
-	bool "Support ARM1020T (rev 0) processor" if ARCH_INTEGRATOR
+	bool "Support ARM1020T (rev 0) processor" if (ARCH_MULTI_V5 && ARCH_INTEGRATOR)
 	select CPU_32v5
 	select CPU_ABRT_EV4T
 	select CPU_CACHE_V4WT
@@ -216,7 +216,7 @@ config CPU_ARM1020
 
 # ARM1020E - needs validating
 config CPU_ARM1020E
-	bool "Support ARM1020E processor" if ARCH_INTEGRATOR
+	bool "Support ARM1020E processor" if (ARCH_MULTI_V5 && ARCH_INTEGRATOR)
 	depends on n
 	select CPU_32v5
 	select CPU_ABRT_EV4T
@@ -229,7 +229,7 @@ config CPU_ARM1020E
 
 # ARM1022E
 config CPU_ARM1022
-	bool "Support ARM1022E processor" if ARCH_INTEGRATOR
+	bool "Support ARM1022E processor" if (ARCH_MULTI_V5 && ARCH_INTEGRATOR)
 	select CPU_32v5
 	select CPU_ABRT_EV4T
 	select CPU_CACHE_VIVT
@@ -247,7 +247,7 @@ config CPU_ARM1022
 
 # ARM1026EJ-S
 config CPU_ARM1026
-	bool "Support ARM1026EJ-S processor" if ARCH_INTEGRATOR
+	bool "Support ARM1026EJ-S processor" if (ARCH_MULTI_V5 && ARCH_INTEGRATOR)
 	select CPU_32v5
 	select CPU_ABRT_EV5T # But need Jazelle, but EV5TJ ignores bit 10
 	select CPU_CACHE_VIVT
@@ -358,7 +358,7 @@ config CPU_PJ4B
 
 # ARMv6
 config CPU_V6
-	bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
+	bool "Support ARM V6 processor" if (!ARCH_MULTIPLATFORM || ARCH_MULTI_V6) && (ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX)
 	select CPU_32v6
 	select CPU_ABRT_EV6
 	select CPU_CACHE_V6
@@ -371,7 +371,7 @@ config CPU_V6
 
 # ARMv6k
 config CPU_V6K
-	bool "Support ARM V6K processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
+	bool "Support ARM V6K processor" if (!ARCH_MULTIPLATFORM || ARCH_MULTI_V6) && (ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX)
 	select CPU_32v6
 	select CPU_32v6K
 	select CPU_ABRT_EV6
@@ -385,7 +385,7 @@ config CPU_V6K
 
 # ARMv7
 config CPU_V7
-	bool "Support ARM V7 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
+	bool "Support ARM V7 processor" if (!ARCH_MULTIPLATFORM || ARCH_MULTI_V7) && (ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX)
 	select CPU_32v6K
 	select CPU_32v7
 	select CPU_ABRT_EV7
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index f0a0084..87746c3 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -35,6 +35,7 @@ obj-$(CONFIG_SAMSUNG_DMADEV)	+= dma-ops.o
 # PM support
 
 obj-$(CONFIG_PM_SLEEP)		+= pm-common.o
+obj-$(CONFIG_EXYNOS_CPU_SUSPEND) += pm-common.o
 obj-$(CONFIG_SAMSUNG_PM)	+= pm.o
 obj-$(CONFIG_SAMSUNG_PM_GPIO)	+= pm-gpio.o
 obj-$(CONFIG_SAMSUNG_PM_CHECK)	+= pm-check.o