Merge with master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6.git

128 files changed, 2187 insertions, 1393 deletions

diff --git a/arch/h8300/kernel/process.c b/arch/h8300/kernel/process.c
index 134aec1..b5f83e9f 100644
--- a/arch/h8300/kernel/process.c
+++ b/arch/h8300/kernel/process.c
@@ -54,7 +54,7 @@ asmlinkage void ret_from_fork(void);
 void default_idle(void)
 {
 	while(1) {
-		if (need_resched()) {
+		if (!need_resched()) {
 			local_irq_enable();
 			__asm__("sleep");
 			local_irq_disable();
diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig
index e382f32..dfd904f 100644
--- a/arch/i386/Kconfig
+++ b/arch/i386/Kconfig
@@ -1163,7 +1163,7 @@ config PCI_DIRECT
 
 config PCI_MMCONFIG
 	bool
-	depends on PCI && (PCI_GOMMCONFIG || (PCI_GOANY && ACPI))
+	depends on PCI && ACPI && (PCI_GOMMCONFIG || PCI_GOANY)
 	select ACPI_BOOT
 	default y
 
diff --git a/arch/i386/kernel/cpu/amd.c b/arch/i386/kernel/cpu/amd.c
index fa34a06..73aeaf5 100644
--- a/arch/i386/kernel/cpu/amd.c
+++ b/arch/i386/kernel/cpu/amd.c
@@ -195,7 +195,7 @@ static void __init init_amd(struct cpuinfo_x86 *c)
 			c->x86_num_cores = 1;
 	}
 
-#ifdef CONFIG_X86_SMP
+#ifdef CONFIG_X86_HT
 	/*
 	 * On a AMD dual core setup the lower bits of the APIC id
 	 * distingush the cores.  Assumes number of cores is a power
@@ -203,8 +203,11 @@ static void __init init_amd(struct cpuinfo_x86 *c)
 	 */
 	if (c->x86_num_cores > 1) {
 		int cpu = smp_processor_id();
-		/* Fix up the APIC ID following AMD specifications. */
-		cpu_core_id[cpu] >>= hweight32(c->x86_num_cores - 1);
+		unsigned bits = 0;
+		while ((1 << bits) < c->x86_num_cores)
+			bits++;
+		cpu_core_id[cpu] = phys_proc_id[cpu] & ((1<<bits)-1);
+		phys_proc_id[cpu] >>= bits;
 		printk(KERN_INFO "CPU %d(%d) -> Core %d\n",
 		       cpu, c->x86_num_cores, cpu_core_id[cpu]);
 	}
diff --git a/arch/i386/kernel/cpu/common.c b/arch/i386/kernel/cpu/common.c
index 11e6e6f..d199e52 100644
--- a/arch/i386/kernel/cpu/common.c
+++ b/arch/i386/kernel/cpu/common.c
@@ -244,11 +244,8 @@ static void __init early_cpu_detect(void)
 
 	early_intel_workaround(c);
 
-#ifdef CONFIG_SMP
 #ifdef CONFIG_X86_HT
-	phys_proc_id[smp_processor_id()] =
-#endif
-	cpu_core_id[smp_processor_id()] = (cpuid_ebx(1) >> 24) & 0xff;
+	phys_proc_id[smp_processor_id()] = (cpuid_ebx(1) >> 24) & 0xff;
 #endif
 }
 
diff --git a/arch/i386/kernel/cpu/cpufreq/Kconfig b/arch/i386/kernel/cpu/cpufreq/Kconfig
index f25ffd7..0f1eb50 100644
--- a/arch/i386/kernel/cpu/cpufreq/Kconfig
+++ b/arch/i386/kernel/cpu/cpufreq/Kconfig
@@ -23,7 +23,7 @@ config X86_ACPI_CPUFREQ
 	  If in doubt, say N.
 
 config ELAN_CPUFREQ
-	tristate "AMD Elan"
+	tristate "AMD Elan SC400 and SC410"
 	select CPU_FREQ_TABLE
 	depends on X86_ELAN
 	---help---
@@ -38,6 +38,18 @@ config ELAN_CPUFREQ
 
 	  If in doubt, say N.
 
+config SC520_CPUFREQ
+	tristate "AMD Elan SC520"
+	select CPU_FREQ_TABLE
+	depends on X86_ELAN
+	---help---
+	  This adds the CPUFreq driver for AMD Elan SC520 processor.
+
+	  For details, take a look at <file:Documentation/cpu-freq/>.
+
+	  If in doubt, say N.
+
+
 config X86_POWERNOW_K6
 	tristate "AMD Mobile K6-2/K6-3 PowerNow!"
 	select CPU_FREQ_TABLE
diff --git a/arch/i386/kernel/cpu/cpufreq/Makefile b/arch/i386/kernel/cpu/cpufreq/Makefile
index a922e97..2e894f1 100644
--- a/arch/i386/kernel/cpu/cpufreq/Makefile
+++ b/arch/i386/kernel/cpu/cpufreq/Makefile
@@ -3,6 +3,7 @@ obj-$(CONFIG_X86_POWERNOW_K7)		+= powernow-k7.o
 obj-$(CONFIG_X86_POWERNOW_K8)		+= powernow-k8.o
 obj-$(CONFIG_X86_LONGHAUL)		+= longhaul.o
 obj-$(CONFIG_ELAN_CPUFREQ)		+= elanfreq.o
+obj-$(CONFIG_SC520_CPUFREQ)		+= sc520_freq.o
 obj-$(CONFIG_X86_LONGRUN)		+= longrun.o  
 obj-$(CONFIG_X86_GX_SUSPMOD)		+= gx-suspmod.o
 obj-$(CONFIG_X86_SPEEDSTEP_ICH)		+= speedstep-ich.o
diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c
index ab0f9f5..04e3563d 100644
--- a/arch/i386/kernel/cpu/cpufreq/longhaul.c
+++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c
@@ -29,6 +29,7 @@
 #include <linux/cpufreq.h>
 #include <linux/slab.h>
 #include <linux/string.h>
+#include <linux/pci.h>
 
 #include <asm/msr.h>
 #include <asm/timex.h>
@@ -119,7 +120,13 @@ static int longhaul_get_cpu_mult(void)
 static void do_powersaver(union msr_longhaul *longhaul,
 			unsigned int clock_ratio_index)
 {
+	struct pci_dev *dev;
+	unsigned long flags;
+	unsigned int tmp_mask;
 	int version;
+	int i;
+	u16 pci_cmd;
+	u16 cmd_state[64];
 
 	switch (cpu_model) {
 	case CPU_EZRA_T:
@@ -137,17 +144,58 @@ static void do_powersaver(union msr_longhaul *longhaul,
 	longhaul->bits.SoftBusRatio4 = (clock_ratio_index & 0x10) >> 4;
 	longhaul->bits.EnableSoftBusRatio = 1;
 	longhaul->bits.RevisionKey = 0;
-	local_irq_disable();
-	wrmsrl(MSR_VIA_LONGHAUL, longhaul->val);
+
+	preempt_disable();
+	local_irq_save(flags);
+
+	/*
+	 * get current pci bus master state for all devices
+	 * and clear bus master bit
+	 */
+	dev = NULL;
+	i = 0;
+	do {
+		dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev);
+		if (dev != NULL) {
+			pci_read_config_word(dev, PCI_COMMAND, &pci_cmd);
+			cmd_state[i++] = pci_cmd;
+			pci_cmd &= ~PCI_COMMAND_MASTER;
+			pci_write_config_word(dev, PCI_COMMAND, pci_cmd);
+		}
+	} while (dev != NULL);
+
+	tmp_mask=inb(0x21);	/* works on C3. save mask. */
+	outb(0xFE,0x21);	/* TMR0 only */
+	outb(0xFF,0x80);	/* delay */
+
 	local_irq_enable();
+
+	__hlt();
+	wrmsrl(MSR_VIA_LONGHAUL, longhaul->val);
 	__hlt();
 
+	local_irq_disable();
+
+	outb(tmp_mask,0x21);	/* restore mask */
+
+	/* restore pci bus master state for all devices */
+	dev = NULL;
+	i = 0;
+	do {
+		dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev);
+		if (dev != NULL) {
+			pci_cmd = cmd_state[i++];
+			pci_write_config_byte(dev, PCI_COMMAND, pci_cmd);
+		}
+	} while (dev != NULL);
+	local_irq_restore(flags);
+	preempt_enable();
+
+	/* disable bus ratio bit */
 	rdmsrl(MSR_VIA_LONGHAUL, longhaul->val);
 	longhaul->bits.EnableSoftBusRatio = 0;
 	longhaul->bits.RevisionKey = version;
-	local_irq_disable();
 	wrmsrl(MSR_VIA_LONGHAUL, longhaul->val);
-	local_irq_enable();
 }
 
 /**
@@ -578,7 +626,7 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy)
 		longhaul_setup_voltagescaling();
 
 	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
-	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+	policy->cpuinfo.transition_latency = 200000;	/* nsec */
 	policy->cur = calc_speed(longhaul_get_cpu_mult());
 
 	ret = cpufreq_frequency_table_cpuinfo(policy, longhaul_table);
diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k7.c b/arch/i386/kernel/cpu/cpufreq/powernow-k7.c
index 913f652..5c53006 100644
--- a/arch/i386/kernel/cpu/cpufreq/powernow-k7.c
+++ b/arch/i386/kernel/cpu/cpufreq/powernow-k7.c
@@ -23,6 +23,7 @@
 #include <linux/dmi.h>
 
 #include <asm/msr.h>
+#include <asm/timer.h>
 #include <asm/timex.h>
 #include <asm/io.h>
 #include <asm/system.h>
@@ -586,13 +587,17 @@ static int __init powernow_cpu_init (struct cpufreq_policy *policy)
 
 	rdmsrl (MSR_K7_FID_VID_STATUS, fidvidstatus.val);
 
-	/* A K7 with powernow technology is set to max frequency by BIOS */
-	fsb = (10 * cpu_khz) / fid_codes[fidvidstatus.bits.MFID];
+	/* recalibrate cpu_khz */
+	result = recalibrate_cpu_khz();
+	if (result)
+		return result;
+
+	fsb = (10 * cpu_khz) / fid_codes[fidvidstatus.bits.CFID];
 	if (!fsb) {
 		printk(KERN_WARNING PFX "can not determine bus frequency\n");
 		return -EINVAL;
 	}
-	dprintk("FSB: %3d.%03d MHz\n", fsb/1000, fsb%1000);
+	dprintk("FSB: %3dMHz\n", fsb/1000);
 
 	if (dmi_check_system(powernow_dmi_table) || acpi_force) {
 		printk (KERN_INFO PFX "PSB/PST known to be broken.  Trying ACPI instead\n");
diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
index a65ff7e..10cc096 100644
--- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
@@ -4,7 +4,7 @@
  *  GNU general public license version 2. See "COPYING" or
  *  http://www.gnu.org/licenses/gpl.html
  *
- *  Support : paul.devriendt@amd.com
+ *  Support : mark.langsdorf@amd.com
  *
  *  Based on the powernow-k7.c module written by Dave Jones.
  *  (C) 2003 Dave Jones <davej@codemonkey.org.uk> on behalf of SuSE Labs
@@ -15,12 +15,13 @@
  *
  *  Valuable input gratefully received from Dave Jones, Pavel Machek,
  *  Dominik Brodowski, and others.
+ *  Originally developed by Paul Devriendt.
  *  Processor information obtained from Chapter 9 (Power and Thermal Management)
  *  of the "BIOS and Kernel Developer's Guide for the AMD Athlon 64 and AMD
  *  Opteron Processors" available for download from www.amd.com
  *
  *  Tables for specific CPUs can be infrerred from
- *	http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/30430.pdf
+ *     http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/30430.pdf
  */
 
 #include <linux/kernel.h>
@@ -30,6 +31,7 @@
 #include <linux/cpufreq.h>
 #include <linux/slab.h>
 #include <linux/string.h>
+#include <linux/cpumask.h>
 
 #include <asm/msr.h>
 #include <asm/io.h>
@@ -42,7 +44,7 @@
 
 #define PFX "powernow-k8: "
 #define BFX PFX "BIOS error: "
-#define VERSION "version 1.00.09e"
+#define VERSION "version 1.40.2"
 #include "powernow-k8.h"
 
 /* serialize freq changes  */
@@ -50,6 +52,10 @@ static DECLARE_MUTEX(fidvid_sem);
 
 static struct powernow_k8_data *powernow_data[NR_CPUS];
 
+#ifndef CONFIG_SMP
+static cpumask_t cpu_core_map[1];
+#endif
+
 /* Return a frequency in MHz, given an input fid */
 static u32 find_freq_from_fid(u32 fid)
 {
@@ -274,11 +280,18 @@ static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid
 {
 	u32 rvosteps = data->rvo;
 	u32 savefid = data->currfid;
+	u32 maxvid, lo;
 
 	dprintk("ph1 (cpu%d): start, currfid 0x%x, currvid 0x%x, reqvid 0x%x, rvo 0x%x\n",
 		smp_processor_id(),
 		data->currfid, data->currvid, reqvid, data->rvo);
 
+	rdmsr(MSR_FIDVID_STATUS, lo, maxvid);
+	maxvid = 0x1f & (maxvid >> 16);
+	dprintk("ph1 maxvid=0x%x\n", maxvid);
+	if (reqvid < maxvid) /* lower numbers are higher voltages */
+		reqvid = maxvid;
+
 	while (data->currvid > reqvid) {
 		dprintk("ph1: curr 0x%x, req vid 0x%x\n",
 			data->currvid, reqvid);
@@ -286,8 +299,8 @@ static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid
 			return 1;
 	}
 
-	while ((rvosteps > 0)  && ((data->rvo + data->currvid) > reqvid)) {
-		if (data->currvid == 0) {
+	while ((rvosteps > 0) && ((data->rvo + data->currvid) > reqvid)) {
+		if (data->currvid == maxvid) {
 			rvosteps = 0;
 		} else {
 			dprintk("ph1: changing vid for rvo, req 0x%x\n",
@@ -671,7 +684,7 @@ static int find_psb_table(struct powernow_k8_data *data)
 	 * BIOS and Kernel Developer's Guide, which is available on
 	 * www.amd.com
 	 */
-	printk(KERN_ERR PFX "BIOS error - no PSB\n");
+	printk(KERN_INFO PFX "BIOS error - no PSB or ACPI _PSS objects\n");
 	return -ENODEV;
 }
 
@@ -695,7 +708,7 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
 	struct cpufreq_frequency_table *powernow_table;
 
 	if (acpi_processor_register_performance(&data->acpi_data, data->cpu)) {
-		dprintk("register performance failed\n");
+		dprintk("register performance failed: bad ACPI data\n");
 		return -EIO;
 	}
 
@@ -746,22 +759,23 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
 			continue;
 		}
 
- 		if (fid < HI_FID_TABLE_BOTTOM) {
- 			if (cntlofreq) {
- 				/* if both entries are the same, ignore this
- 				 * one... 
- 				 */
- 				if ((powernow_table[i].frequency != powernow_table[cntlofreq].frequency) ||
- 				    (powernow_table[i].index != powernow_table[cntlofreq].index)) {
- 					printk(KERN_ERR PFX "Too many lo freq table entries\n");
- 					goto err_out_mem;
- 				}
-				
- 				dprintk("double low frequency table entry, ignoring it.\n");
- 				powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
- 				continue;
- 			} else
- 				cntlofreq = i;
+		/* verify only 1 entry from the lo frequency table */
+		if (fid < HI_FID_TABLE_BOTTOM) {
+			if (cntlofreq) {
+				/* if both entries are the same, ignore this
+				 * one... 
+				 */
+				if ((powernow_table[i].frequency != powernow_table[cntlofreq].frequency) ||
+				    (powernow_table[i].index != powernow_table[cntlofreq].index)) {
+					printk(KERN_ERR PFX "Too many lo freq table entries\n");
+					goto err_out_mem;
+				}
+
+				dprintk("double low frequency table entry, ignoring it.\n");
+				powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+				continue;
+			} else
+				cntlofreq = i;
 		}
 
 		if (powernow_table[i].frequency != (data->acpi_data.states[i].core_frequency * 1000)) {
@@ -816,7 +830,7 @@ static int transition_frequency(struct powernow_k8_data *data, unsigned int inde
 {
 	u32 fid;
 	u32 vid;
-	int res;
+	int res, i;
 	struct cpufreq_freqs freqs;
 
 	dprintk("cpu %d transition to index %u\n", smp_processor_id(), index);
@@ -841,7 +855,8 @@ static int transition_frequency(struct powernow_k8_data *data, unsigned int inde
 	}
 
 	if ((fid < HI_FID_TABLE_BOTTOM) && (data->currfid < HI_FID_TABLE_BOTTOM)) {
-		printk("ignoring illegal change in lo freq table-%x to 0x%x\n",
+		printk(KERN_ERR PFX
+		       "ignoring illegal change in lo freq table-%x to 0x%x\n",
 		       data->currfid, fid);
 		return 1;
 	}
@@ -850,18 +865,20 @@ static int transition_frequency(struct powernow_k8_data *data, unsigned int inde
 		smp_processor_id(), fid, vid);
 
 	freqs.cpu = data->cpu;
-
 	freqs.old = find_khz_freq_from_fid(data->currfid);
 	freqs.new = find_khz_freq_from_fid(fid);
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+	for_each_cpu_mask(i, cpu_core_map[data->cpu]) {
+		freqs.cpu = i;
+		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+	}
 
-	down(&fidvid_sem);
 	res = transition_fid_vid(data, fid, vid);
-	up(&fidvid_sem);
 
 	freqs.new = find_khz_freq_from_fid(data->currfid);
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
+	for_each_cpu_mask(i, cpu_core_map[data->cpu]) {
+		freqs.cpu = i;
+		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+        }
 	return res;
 }
 
@@ -874,6 +891,7 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi
 	u32 checkvid = data->currvid;
 	unsigned int newstate;
 	int ret = -EIO;
+	int i;
 
 	/* only run on specific CPU from here on */
 	oldmask = current->cpus_allowed;
@@ -902,22 +920,41 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi
 		data->currfid, data->currvid);
 
 	if ((checkvid != data->currvid) || (checkfid != data->currfid)) {
-		printk(KERN_ERR PFX
-		       "error - out of sync, fid 0x%x 0x%x, vid 0x%x 0x%x\n",
-		       checkfid, data->currfid, checkvid, data->currvid);
+		printk(KERN_INFO PFX
+			"error - out of sync, fix 0x%x 0x%x, vid 0x%x 0x%x\n",
+			checkfid, data->currfid, checkvid, data->currvid);
 	}
 
 	if (cpufreq_frequency_table_target(pol, data->powernow_table, targfreq, relation, &newstate))
 		goto err_out;
 
+	down(&fidvid_sem);
+
+	for_each_cpu_mask(i, cpu_core_map[pol->cpu]) {
+		/* make sure the sibling is initialized */
+		if (!powernow_data[i]) {
+                        ret = 0;
+                        up(&fidvid_sem);
+                        goto err_out;
+                }
+	}
+
 	powernow_k8_acpi_pst_values(data, newstate);
 
 	if (transition_frequency(data, newstate)) {
 		printk(KERN_ERR PFX "transition frequency failed\n");
 		ret = 1;
+		up(&fidvid_sem);
 		goto err_out;
 	}
 
+	/* Update all the fid/vids of our siblings */
+	for_each_cpu_mask(i, cpu_core_map[pol->cpu]) {
+		powernow_data[i]->currvid = data->currvid;
+		powernow_data[i]->currfid = data->currfid;
+	}	
+	up(&fidvid_sem);
+
 	pol->cur = find_khz_freq_from_fid(data->currfid);
 	ret = 0;
 
@@ -962,7 +999,7 @@ static int __init powernowk8_cpu_init(struct cpufreq_policy *pol)
 		 */
 
 		if ((num_online_cpus() != 1) || (num_possible_cpus() != 1)) {
-			printk(KERN_INFO PFX "MP systems not supported by PSB BIOS structure\n");
+			printk(KERN_ERR PFX "MP systems not supported by PSB BIOS structure\n");
 			kfree(data);
 			return -ENODEV;
 		}
@@ -1003,6 +1040,7 @@ static int __init powernowk8_cpu_init(struct cpufreq_policy *pol)
 	schedule();
 
 	pol->governor = CPUFREQ_DEFAULT_GOVERNOR;
+	pol->cpus = cpu_core_map[pol->cpu];
 
 	/* Take a crude guess here. 
 	 * That guess was in microseconds, so multiply with 1000 */
@@ -1069,7 +1107,7 @@ static unsigned int powernowk8_get (unsigned int cpu)
 		return 0;
 	}
 	preempt_disable();
-
+	
 	if (query_current_values_with_pending_wait(data))
 		goto out;
 
@@ -1127,9 +1165,10 @@ static void __exit powernowk8_exit(void)
 	cpufreq_unregister_driver(&cpufreq_amd64_driver);
 }
 
-MODULE_AUTHOR("Paul Devriendt <paul.devriendt@amd.com>");
+MODULE_AUTHOR("Paul Devriendt <paul.devriendt@amd.com> and Mark Langsdorf <mark.langsdorf@amd.com.");
 MODULE_DESCRIPTION("AMD Athlon 64 and Opteron processor frequency driver.");
 MODULE_LICENSE("GPL");
 
 late_initcall(powernowk8_init);
 module_exit(powernowk8_exit);
+
diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.h b/arch/i386/kernel/cpu/cpufreq/powernow-k8.h
index 63ebc84..9ed5bf2 100644
--- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.h
+++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.h
@@ -174,3 +174,18 @@ static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvi
 static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid);
 
 static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index);
+
+#ifndef for_each_cpu_mask
+#define for_each_cpu_mask(i,mask) for (i=0;i<1;i++)
+#endif
+                                                                                
+#ifdef CONFIG_SMP
+static inline void define_siblings(int cpu, cpumask_t cpu_sharedcore_mask[])
+{
+}
+#else
+static inline void define_siblings(int cpu, cpumask_t cpu_sharedcore_mask[])
+{
+	cpu_set(0, cpu_sharedcore_mask[0]);
+}
+#endif
diff --git a/arch/i386/kernel/cpu/cpufreq/sc520_freq.c b/arch/i386/kernel/cpu/cpufreq/sc520_freq.c
new file mode 100644
index 0000000..ef457d5
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/sc520_freq.c
@@ -0,0 +1,186 @@
+/*
+ *	sc520_freq.c: cpufreq driver for the AMD Elan sc520
+ *
+ *	Copyright (C) 2005 Sean Young <sean@mess.org>
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	Based on elanfreq.c
+ *
+ *	2005-03-30: - initial revision
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include <linux/delay.h>
+#include <linux/cpufreq.h>
+
+#include <asm/msr.h>
+#include <asm/timex.h>
+#include <asm/io.h>
+
+#define MMCR_BASE	0xfffef000	/* The default base address */
+#define OFFS_CPUCTL	0x2   /* CPU Control Register */
+
+static __u8 __iomem *cpuctl;
+
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "sc520_freq", msg)
+
+static struct cpufreq_frequency_table sc520_freq_table[] = {
+	{0x01,	100000},
+	{0x02,	133000},
+	{0,	CPUFREQ_TABLE_END},
+};
+
+static unsigned int sc520_freq_get_cpu_frequency(unsigned int cpu)
+{
+	u8 clockspeed_reg = *cpuctl;
+
+	switch (clockspeed_reg & 0x03) {
+	default:
+		printk(KERN_ERR "sc520_freq: error: cpuctl register has unexpected value %02x\n", clockspeed_reg);
+	case 0x01:
+		return 100000;
+	case 0x02:
+		return 133000;
+	}
+}
+
+static void sc520_freq_set_cpu_state (unsigned int state)
+{
+
+	struct cpufreq_freqs	freqs;
+	u8 clockspeed_reg;
+
+	freqs.old = sc520_freq_get_cpu_frequency(0);
+	freqs.new = sc520_freq_table[state].frequency;
+	freqs.cpu = 0; /* AMD Elan is UP */
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+	dprintk("attempting to set frequency to %i kHz\n",
+			sc520_freq_table[state].frequency);
+
+	local_irq_disable();
+
+	clockspeed_reg = *cpuctl & ~0x03;
+	*cpuctl = clockspeed_reg | sc520_freq_table[state].index;
+
+	local_irq_enable();
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+};
+
+static int sc520_freq_verify (struct cpufreq_policy *policy)
+{
+	return cpufreq_frequency_table_verify(policy, &sc520_freq_table[0]);
+}
+
+static int sc520_freq_target (struct cpufreq_policy *policy,
+			    unsigned int target_freq,
+			    unsigned int relation)
+{
+	unsigned int newstate = 0;
+
+	if (cpufreq_frequency_table_target(policy, sc520_freq_table, target_freq, relation, &newstate))
+		return -EINVAL;
+
+	sc520_freq_set_cpu_state(newstate);
+
+	return 0;
+}
+
+
+/*
+ *	Module init and exit code
+ */
+
+static int sc520_freq_cpu_init(struct cpufreq_policy *policy)
+{
+	struct cpuinfo_x86 *c = cpu_data;
+	int result;
+
+	/* capability check */
+	if (c->x86_vendor != X86_VENDOR_AMD ||
+	    c->x86 != 4 || c->x86_model != 9)
+		return -ENODEV;
+
+	/* cpuinfo and default policy values */
+	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+	policy->cpuinfo.transition_latency = 1000000; /* 1ms */
+	policy->cur = sc520_freq_get_cpu_frequency(0);
+
+	result = cpufreq_frequency_table_cpuinfo(policy, sc520_freq_table);
+	if (result)
+		return (result);
+
+	cpufreq_frequency_table_get_attr(sc520_freq_table, policy->cpu);
+
+	return 0;
+}
+
+
+static int sc520_freq_cpu_exit(struct cpufreq_policy *policy)
+{
+	cpufreq_frequency_table_put_attr(policy->cpu);
+	return 0;
+}
+
+
+static struct freq_attr* sc520_freq_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	NULL,
+};
+
+
+static struct cpufreq_driver sc520_freq_driver = {
+	.get	= sc520_freq_get_cpu_frequency,
+	.verify	= sc520_freq_verify,
+	.target	= sc520_freq_target,
+	.init	= sc520_freq_cpu_init,
+	.exit	= sc520_freq_cpu_exit,
+	.name	= "sc520_freq",
+	.owner	= THIS_MODULE,
+	.attr	= sc520_freq_attr,
+};
+
+
+static int __init sc520_freq_init(void)
+{
+	struct cpuinfo_x86 *c = cpu_data;
+
+	/* Test if we have the right hardware */
+	if(c->x86_vendor != X86_VENDOR_AMD ||
+				c->x86 != 4 || c->x86_model != 9) {
+		dprintk("no Elan SC520 processor found!\n");
+		return -ENODEV;
+	}
+	cpuctl = ioremap((unsigned long)(MMCR_BASE + OFFS_CPUCTL), 1);
+	if(!cpuctl) {
+		printk(KERN_ERR "sc520_freq: error: failed to remap memory\n");
+		return -ENOMEM;
+	}
+
+	return cpufreq_register_driver(&sc520_freq_driver);
+}
+
+
+static void __exit sc520_freq_exit(void)
+{
+	cpufreq_unregister_driver(&sc520_freq_driver);
+	iounmap(cpuctl);
+}
+
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Sean Young <sean@mess.org>");
+MODULE_DESCRIPTION("cpufreq driver for AMD's Elan sc520 CPU");
+
+module_init(sc520_freq_init);
+module_exit(sc520_freq_exit);
+
diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
index 07d5612..7dcbf70 100644
--- a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
+++ b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
@@ -54,6 +54,8 @@ enum {
 	CPU_DOTHAN_A1,
 	CPU_DOTHAN_A2,
 	CPU_DOTHAN_B0,
+	CPU_MP4HT_D0,
+	CPU_MP4HT_E0,
 };
 
 static const struct cpu_id cpu_ids[] = {
@@ -61,6 +63,8 @@ static const struct cpu_id cpu_ids[] = {
 	[CPU_DOTHAN_A1]	= { 6, 13, 1 },
 	[CPU_DOTHAN_A2]	= { 6, 13, 2 },
 	[CPU_DOTHAN_B0]	= { 6, 13, 6 },
+	[CPU_MP4HT_D0]	= {15,  3, 4 },
+	[CPU_MP4HT_E0]	= {15,  4, 1 },
 };
 #define N_IDS	(sizeof(cpu_ids)/sizeof(cpu_ids[0]))
 
@@ -226,6 +230,8 @@ static struct cpu_model models[] =
 	{ &cpu_ids[CPU_DOTHAN_A1], NULL, 0, NULL },
 	{ &cpu_ids[CPU_DOTHAN_A2], NULL, 0, NULL },
 	{ &cpu_ids[CPU_DOTHAN_B0], NULL, 0, NULL },
+	{ &cpu_ids[CPU_MP4HT_D0], NULL, 0, NULL },
+	{ &cpu_ids[CPU_MP4HT_E0], NULL, 0, NULL },
 
 	{ NULL, }
 };
diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c b/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c
index 8ba430a..d368b3f 100644
--- a/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c
+++ b/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c
@@ -336,7 +336,7 @@ unsigned int speedstep_get_freqs(unsigned int processor,
 	if (!prev_speed)
 		return -EIO;
 
-	dprintk("previous seped is %u\n", prev_speed);
+	dprintk("previous speed is %u\n", prev_speed);
 	
 	local_irq_save(flags);
 
@@ -348,7 +348,7 @@ unsigned int speedstep_get_freqs(unsigned int processor,
 		goto out;
 	}
 
-	dprintk("low seped is %u\n", *low_speed);
+	dprintk("low speed is %u\n", *low_speed);
 
 	/* switch to high state */
 	set_state(SPEEDSTEP_HIGH);
@@ -358,7 +358,7 @@ unsigned int speedstep_get_freqs(unsigned int processor,
 		goto out;
 	}
 
-	dprintk("high seped is %u\n", *high_speed);
+	dprintk("high speed is %u\n", *high_speed);
 
 	if (*low_speed == *high_speed) {
 		ret = -ENODEV;
diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c b/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c
index 79440b3..b25fb6b 100644
--- a/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c
+++ b/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c
@@ -357,6 +357,9 @@ static int __init speedstep_init(void)
 	case SPEEDSTEP_PROCESSOR_PIII_C:
 	case SPEEDSTEP_PROCESSOR_PIII_C_EARLY:
 		break;
+	case SPEEDSTEP_PROCESSOR_P4M:
+		printk(KERN_INFO "speedstep-smi: you're trying to use this cpufreq driver on a Pentium 4-based CPU. Most likely it will not work.\n");
+		break;
 	default:
 		speedstep_processor = 0;
 	}
diff --git a/arch/i386/kernel/cpu/intel_cacheinfo.c b/arch/i386/kernel/cpu/intel_cacheinfo.c
index aeb5b4e..a710dc4 100644
--- a/arch/i386/kernel/cpu/intel_cacheinfo.c
+++ b/arch/i386/kernel/cpu/intel_cacheinfo.c
@@ -118,7 +118,7 @@ struct _cpuid4_info {
 };
 
 #define MAX_CACHE_LEAVES		4
-static unsigned short __devinitdata	num_cache_leaves;
+static unsigned short			num_cache_leaves;
 
 static int __devinit cpuid4_cache_lookup(int index, struct _cpuid4_info *this_leaf)
 {
diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c
index 945ec73..2bfbdde 100644
--- a/arch/i386/kernel/setup.c
+++ b/arch/i386/kernel/setup.c
@@ -1502,11 +1502,13 @@ void __init setup_arch(char **cmdline_p)
 	if (efi_enabled)
 		efi_map_memmap();
 
+#ifdef CONFIG_ACPI_BOOT
 	/*
 	 * Parse the ACPI tables for possible boot-time SMP configuration.
 	 */
 	acpi_boot_table_init();
 	acpi_boot_init();
+#endif
 
 #ifdef CONFIG_X86_LOCAL_APIC
 	if (smp_found_config)
diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c
index cbea7ac..bc1bb69 100644
--- a/arch/i386/kernel/smpboot.c
+++ b/arch/i386/kernel/smpboot.c
@@ -888,6 +888,7 @@ void *xquad_portio;
 
 cpumask_t cpu_sibling_map[NR_CPUS] __cacheline_aligned;
 cpumask_t cpu_core_map[NR_CPUS] __cacheline_aligned;
+EXPORT_SYMBOL(cpu_core_map);
 
 static void __init smp_boot_cpus(unsigned int max_cpus)
 {
@@ -1073,8 +1074,10 @@ static void __init smp_boot_cpus(unsigned int max_cpus)
 			cpu_set(cpu, cpu_sibling_map[cpu]);
 		}
 
-		if (siblings != smp_num_siblings)
+		if (siblings != smp_num_siblings) {
 			printk(KERN_WARNING "WARNING: %d siblings found for CPU%d, should be %d\n", siblings, cpu, smp_num_siblings);
+			smp_num_siblings = siblings;
+		}
 
 		if (c->x86_num_cores > 1) {
 			for (i = 0; i < NR_CPUS; i++) {
diff --git a/arch/i386/kernel/timers/common.c b/arch/i386/kernel/timers/common.c
index f7f9000..8e20121 100644
--- a/arch/i386/kernel/timers/common.c
+++ b/arch/i386/kernel/timers/common.c
@@ -6,6 +6,7 @@
 #include <linux/timex.h>
 #include <linux/errno.h>
 #include <linux/jiffies.h>
+#include <linux/module.h>
 
 #include <asm/io.h>
 #include <asm/timer.h>
@@ -24,7 +25,7 @@
 
 #define CALIBRATE_TIME	(5 * 1000020/HZ)
 
-unsigned long __init calibrate_tsc(void)
+unsigned long calibrate_tsc(void)
 {
 	mach_prepare_counter();
 
@@ -139,7 +140,7 @@ bad_calibration:
 #endif
 
 /* calculate cpu_khz */
-void __init init_cpu_khz(void)
+void init_cpu_khz(void)
 {
 	if (cpu_has_tsc) {
 		unsigned long tsc_quotient = calibrate_tsc();
@@ -158,3 +159,4 @@ void __init init_cpu_khz(void)
 		}
 	}
 }
+
diff --git a/arch/i386/kernel/timers/timer_tsc.c b/arch/i386/kernel/timers/timer_tsc.c
index 7926d96..180444d 100644
--- a/arch/i386/kernel/timers/timer_tsc.c
+++ b/arch/i386/kernel/timers/timer_tsc.c
@@ -320,6 +320,26 @@ core_initcall(cpufreq_tsc);
 static inline void cpufreq_delayed_get(void) { return; }
 #endif 
 
+int recalibrate_cpu_khz(void)
+{
+#ifndef CONFIG_SMP
+	unsigned long cpu_khz_old = cpu_khz;
+
+	if (cpu_has_tsc) {
+		init_cpu_khz();
+		cpu_data[0].loops_per_jiffy =
+		    cpufreq_scale(cpu_data[0].loops_per_jiffy,
+			          cpu_khz_old,
+				  cpu_khz);
+		return 0;
+	} else
+		return -ENODEV;
+#else
+	return -ENODEV;
+#endif
+}
+EXPORT_SYMBOL(recalibrate_cpu_khz);
+
 static void mark_offset_tsc(void)
 {
 	unsigned long lost,delay;
diff --git a/arch/i386/mach-voyager/voyager_smp.c b/arch/i386/mach-voyager/voyager_smp.c
index 903d739..a6e0ddd 100644
--- a/arch/i386/mach-voyager/voyager_smp.c
+++ b/arch/i386/mach-voyager/voyager_smp.c
@@ -97,7 +97,6 @@ static void ack_vic_irq(unsigned int irq);
 static void vic_enable_cpi(void);
 static void do_boot_cpu(__u8 cpuid);
 static void do_quad_bootstrap(void);
-static inline void wrapper_smp_local_timer_interrupt(struct pt_regs *);
 
 int hard_smp_processor_id(void);
 
@@ -126,6 +125,14 @@ send_QIC_CPI(__u32 cpuset, __u8 cpi)
 }
 
 static inline void
+wrapper_smp_local_timer_interrupt(struct pt_regs *regs)
+{
+	irq_enter();
+	smp_local_timer_interrupt(regs);
+	irq_exit();
+}
+
+static inline void
 send_one_CPI(__u8 cpu, __u8 cpi)
 {
 	if(voyager_quad_processors & (1<<cpu))
@@ -1249,14 +1256,6 @@ smp_vic_timer_interrupt(struct pt_regs *regs)
 	smp_local_timer_interrupt(regs);
 }
 
-static inline void
-wrapper_smp_local_timer_interrupt(struct pt_regs *regs)
-{
-	irq_enter();
-	smp_local_timer_interrupt(regs);
-	irq_exit();
-}
-
 /* local (per CPU) timer interrupt.  It does both profiling and
  * process statistics/rescheduling.
  *
diff --git a/arch/i386/mm/ioremap.c b/arch/i386/mm/ioremap.c
index db06f73..ab54279 100644
--- a/arch/i386/mm/ioremap.c
+++ b/arch/i386/mm/ioremap.c
@@ -238,19 +238,21 @@ void iounmap(volatile void __iomem *addr)
 			addr < phys_to_virt(ISA_END_ADDRESS))
 		return;
 
-	p = remove_vm_area((void *) (PAGE_MASK & (unsigned long __force) addr));
+	write_lock(&vmlist_lock);
+	p = __remove_vm_area((void *) (PAGE_MASK & (unsigned long __force) addr));
 	if (!p) { 
-		printk("__iounmap: bad address %p\n", addr);
-		return;
+		printk("iounmap: bad address %p\n", addr);
+		goto out_unlock;
 	}
 
 	if ((p->flags >> 20) && p->phys_addr < virt_to_phys(high_memory) - 1) {
-		/* p->size includes the guard page, but cpa doesn't like that */
 		change_page_attr(virt_to_page(__va(p->phys_addr)),
 				 p->size >> PAGE_SHIFT,
 				 PAGE_KERNEL);
 		global_flush_tlb();
 	} 
+out_unlock:
+	write_unlock(&vmlist_lock);
 	kfree(p); 
 }
 
diff --git a/arch/i386/pci/irq.c b/arch/i386/pci/irq.c
index d6598da..da21b1d 100644
--- a/arch/i386/pci/irq.c
+++ b/arch/i386/pci/irq.c
@@ -1029,7 +1029,6 @@ void pcibios_penalize_isa_irq(int irq)
 static int pirq_enable_irq(struct pci_dev *dev)
 {
 	u8 pin;
-	extern int via_interrupt_line_quirk;
 	struct pci_dev *temp_dev;
 
 	pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
@@ -1084,10 +1083,6 @@ static int pirq_enable_irq(struct pci_dev *dev)
 		printk(KERN_WARNING "PCI: No IRQ known for interrupt pin %c of device %s.%s\n",
 		       'A' + pin, pci_name(dev), msg);
 	}
-	/* VIA bridges use interrupt line for apic/pci steering across
-	   the V-Link */
-	else if (via_interrupt_line_quirk)
-		pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq & 15);
 	return 0;
 }
 
diff --git a/arch/ia64/ia32/sys_ia32.c b/arch/ia64/ia32/sys_ia32.c
index 247a21c..c1e20d6 100644
--- a/arch/ia64/ia32/sys_ia32.c
+++ b/arch/ia64/ia32/sys_ia32.c
@@ -2427,7 +2427,7 @@ sys32_epoll_wait(int epfd, struct epoll_event32 __user * events, int maxevents,
 {
 	struct epoll_event *events64 = NULL;
 	mm_segment_t old_fs = get_fs();
-	int error, numevents, size;
+	int numevents, size;
 	int evt_idx;
 	int do_free_pages = 0;
 
diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S
index 81c45d4..d99316c 100644
--- a/arch/ia64/kernel/entry.S
+++ b/arch/ia64/kernel/entry.S
@@ -1182,7 +1182,7 @@ ENTRY(notify_resume_user)
 	;;
 (pNonSys) mov out2=0				// out2==0 => not a syscall
 	.fframe 16
-	.spillpsp ar.unat, 16			// (note that offset is relative to psp+0x10!)
+	.spillsp ar.unat, 16
 	st8 [sp]=r9,-16				// allocate space for ar.unat and save it
 	st8 [out1]=loc1,-8			// save ar.pfs, out1=&sigscratch
 	.body
@@ -1208,7 +1208,7 @@ GLOBAL_ENTRY(sys_rt_sigsuspend)
 	adds out2=8,sp				// out2=&sigscratch->ar_pfs
 	;;
 	.fframe 16
-	.spillpsp ar.unat, 16			// (note that offset is relative to psp+0x10!)
+	.spillsp ar.unat, 16
 	st8 [sp]=r9,-16				// allocate space for ar.unat and save it
 	st8 [out2]=loc1,-8			// save ar.pfs, out2=&sigscratch
 	.body
diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c
index 4d6c7b8f..736e328 100644
--- a/arch/ia64/kernel/mca.c
+++ b/arch/ia64/kernel/mca.c
@@ -1103,8 +1103,6 @@ ia64_mca_cpe_int_caller(int cpe_irq, void *arg, struct pt_regs *ptregs)
 	return IRQ_HANDLED;
 }
 
-#endif /* CONFIG_ACPI */
-
 /*
  *  ia64_mca_cpe_poll
  *
@@ -1122,6 +1120,8 @@ ia64_mca_cpe_poll (unsigned long dummy)
 	platform_send_ipi(first_cpu(cpu_online_map), IA64_CPEP_VECTOR, IA64_IPI_DM_INT, 0);
 }
 
+#endif /* CONFIG_ACPI */
+
 /*
  * C portion of the OS INIT handler
  *
@@ -1390,8 +1390,7 @@ ia64_mca_init(void)
 	register_percpu_irq(IA64_MCA_WAKEUP_VECTOR, &mca_wkup_irqaction);
 
 #ifdef CONFIG_ACPI
-	/* Setup the CPEI/P vector and handler */
-	cpe_vector = acpi_request_vector(ACPI_INTERRUPT_CPEI);
+	/* Setup the CPEI/P handler */
 	register_percpu_irq(IA64_CPEP_VECTOR, &mca_cpep_irqaction);
 #endif
 
@@ -1436,6 +1435,7 @@ ia64_mca_late_init(void)
 
 #ifdef CONFIG_ACPI
 	/* Setup the CPEI/P vector and handler */
+	cpe_vector = acpi_request_vector(ACPI_INTERRUPT_CPEI);
 	init_timer(&cpe_poll_timer);
 	cpe_poll_timer.function = ia64_mca_cpe_poll;
 
diff --git a/arch/ia64/kernel/minstate.h b/arch/ia64/kernel/minstate.h
index 1dbc7b2..f6d8a01 100644
--- a/arch/ia64/kernel/minstate.h
+++ b/arch/ia64/kernel/minstate.h
@@ -41,7 +41,7 @@
 (pKStk) addl r3=THIS_CPU(ia64_mca_data),r3;;							\
 (pKStk) ld8 r3 = [r3];;										\
 (pKStk) addl r3=IA64_MCA_CPU_INIT_STACK_OFFSET,r3;;						\
-(pKStk) addl sp=IA64_STK_OFFSET-IA64_PT_REGS_SIZE,r3;						\
+(pKStk) addl r1=IA64_STK_OFFSET-IA64_PT_REGS_SIZE,r3;						\
 (pUStk)	mov ar.rsc=0;		/* set enforced lazy mode, pl 0, little-endian, loadrs=0 */	\
 (pUStk)	addl r22=IA64_RBS_OFFSET,r1;		/* compute base of register backing store */	\
 	;;											\
@@ -50,7 +50,6 @@
 (pUStk)	mov r23=ar.bspstore;				/* save ar.bspstore */			\
 (pUStk)	dep r22=-1,r22,61,3;			/* compute kernel virtual addr of RBS */	\
 	;;											\
-(pKStk) addl r1=-IA64_PT_REGS_SIZE,r1;		/* if in kernel mode, use sp (r12) */		\
 (pUStk)	mov ar.bspstore=r22;			/* switch to kernel RBS */			\
 	;;											\
 (pUStk)	mov r18=ar.bsp;										\
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index 71c1016..6407bff 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -11,7 +11,7 @@
  * Version Perfmon-2.x is a rewrite of perfmon-1.x
  * by Stephane Eranian, Hewlett Packard Co.
  *
- * Copyright (C) 1999-2003, 2005  Hewlett Packard Co
+ * Copyright (C) 1999-2005  Hewlett Packard Co
  *               Stephane Eranian <eranian@hpl.hp.com>
  *               David Mosberger-Tang <davidm@hpl.hp.com>
  *
@@ -497,6 +497,9 @@ typedef struct {
 static pfm_stats_t		pfm_stats[NR_CPUS];
 static pfm_session_t		pfm_sessions;	/* global sessions information */
 
+static spinlock_t pfm_alt_install_check = SPIN_LOCK_UNLOCKED;
+static pfm_intr_handler_desc_t  *pfm_alt_intr_handler;
+
 static struct proc_dir_entry 	*perfmon_dir;
 static pfm_uuid_t		pfm_null_uuid = {0,};
 
@@ -606,6 +609,7 @@ DEFINE_PER_CPU(unsigned long, pfm_syst_info);
 DEFINE_PER_CPU(struct task_struct *, pmu_owner);
 DEFINE_PER_CPU(pfm_context_t  *, pmu_ctx);
 DEFINE_PER_CPU(unsigned long, pmu_activation_number);
+EXPORT_PER_CPU_SYMBOL_GPL(pfm_syst_info);
 
 
 /* forward declaration */
@@ -1325,7 +1329,7 @@ pfm_reserve_session(struct task_struct *task, int is_syswide, unsigned int cpu)
 error_conflict:
 	DPRINT(("system wide not possible, conflicting session [%d] on CPU%d\n",
   		pfm_sessions.pfs_sys_session[cpu]->pid,
-		smp_processor_id()));
+		cpu));
 abort:
 	UNLOCK_PFS(flags);
 
@@ -5555,26 +5559,32 @@ pfm_interrupt_handler(int irq, void *arg, struct pt_regs *regs)
 	int ret;
 
 	this_cpu = get_cpu();
-	min      = pfm_stats[this_cpu].pfm_ovfl_intr_cycles_min;
-	max      = pfm_stats[this_cpu].pfm_ovfl_intr_cycles_max;
+	if (likely(!pfm_alt_intr_handler)) {
+		min = pfm_stats[this_cpu].pfm_ovfl_intr_cycles_min;
+		max = pfm_stats[this_cpu].pfm_ovfl_intr_cycles_max;
 
-	start_cycles = ia64_get_itc();
+		start_cycles = ia64_get_itc();
 
-	ret = pfm_do_interrupt_handler(irq, arg, regs);
+		ret = pfm_do_interrupt_handler(irq, arg, regs);
 
-	total_cycles = ia64_get_itc();
+		total_cycles = ia64_get_itc();
 
-	/*
-	 * don't measure spurious interrupts
-	 */
-	if (likely(ret == 0)) {
-		total_cycles -= start_cycles;
+		/*
+		 * don't measure spurious interrupts
+		 */
+		if (likely(ret == 0)) {
+			total_cycles -= start_cycles;
 
-		if (total_cycles < min) pfm_stats[this_cpu].pfm_ovfl_intr_cycles_min = total_cycles;
-		if (total_cycles > max) pfm_stats[this_cpu].pfm_ovfl_intr_cycles_max = total_cycles;
+			if (total_cycles < min) pfm_stats[this_cpu].pfm_ovfl_intr_cycles_min = total_cycles;
+			if (total_cycles > max) pfm_stats[this_cpu].pfm_ovfl_intr_cycles_max = total_cycles;
 
-		pfm_stats[this_cpu].pfm_ovfl_intr_cycles += total_cycles;
+			pfm_stats[this_cpu].pfm_ovfl_intr_cycles += total_cycles;
+		}
+	}
+	else {
+		(*pfm_alt_intr_handler->handler)(irq, arg, regs);
 	}
+
 	put_cpu_no_resched();
 	return IRQ_HANDLED;
 }
@@ -6425,6 +6435,141 @@ static struct irqaction perfmon_irqaction = {
 	.name    = "perfmon"
 };
 
+static void
+pfm_alt_save_pmu_state(void *data)
+{
+	struct pt_regs *regs;
+
+	regs = ia64_task_regs(current);
+
+	DPRINT(("called\n"));
+
+	/*
+	 * should not be necessary but
+	 * let's take not risk
+	 */
+	pfm_clear_psr_up();
+	pfm_clear_psr_pp();
+	ia64_psr(regs)->pp = 0;
+
+	/*
+	 * This call is required
+	 * May cause a spurious interrupt on some processors
+	 */
+	pfm_freeze_pmu();
+
+	ia64_srlz_d();
+}
+
+void
+pfm_alt_restore_pmu_state(void *data)
+{
+	struct pt_regs *regs;
+
+	regs = ia64_task_regs(current);
+
+	DPRINT(("called\n"));
+
+	/*
+	 * put PMU back in state expected
+	 * by perfmon
+	 */
+	pfm_clear_psr_up();
+	pfm_clear_psr_pp();
+	ia64_psr(regs)->pp = 0;
+
+	/*
+	 * perfmon runs with PMU unfrozen at all times
+	 */
+	pfm_unfreeze_pmu();
+
+	ia64_srlz_d();
+}
+
+int
+pfm_install_alt_pmu_interrupt(pfm_intr_handler_desc_t *hdl)
+{
+	int ret, i;
+	int reserve_cpu;
+
+	/* some sanity checks */
+	if (hdl == NULL || hdl->handler == NULL) return -EINVAL;
+
+	/* do the easy test first */
+	if (pfm_alt_intr_handler) return -EBUSY;
+
+	/* one at a time in the install or remove, just fail the others */
+	if (!spin_trylock(&pfm_alt_install_check)) {
+		return -EBUSY;
+	}
+
+	/* reserve our session */
+	for_each_online_cpu(reserve_cpu) {
+		ret = pfm_reserve_session(NULL, 1, reserve_cpu);
+		if (ret) goto cleanup_reserve;
+	}
+
+	/* save the current system wide pmu states */
+	ret = on_each_cpu(pfm_alt_save_pmu_state, NULL, 0, 1);
+	if (ret) {
+		DPRINT(("on_each_cpu() failed: %d\n", ret));
+		goto cleanup_reserve;
+	}
+
+	/* officially change to the alternate interrupt handler */
+	pfm_alt_intr_handler = hdl;
+
+	spin_unlock(&pfm_alt_install_check);
+
+	return 0;
+
+cleanup_reserve:
+	for_each_online_cpu(i) {
+		/* don't unreserve more than we reserved */
+		if (i >= reserve_cpu) break;
+
+		pfm_unreserve_session(NULL, 1, i);
+	}
+
+	spin_unlock(&pfm_alt_install_check);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(pfm_install_alt_pmu_interrupt);
+
+int
+pfm_remove_alt_pmu_interrupt(pfm_intr_handler_desc_t *hdl)
+{
+	int i;
+	int ret;
+
+	if (hdl == NULL) return -EINVAL;
+
+	/* cannot remove someone else's handler! */
+	if (pfm_alt_intr_handler != hdl) return -EINVAL;
+
+	/* one at a time in the install or remove, just fail the others */
+	if (!spin_trylock(&pfm_alt_install_check)) {
+		return -EBUSY;
+	}
+
+	pfm_alt_intr_handler = NULL;
+
+	ret = on_each_cpu(pfm_alt_restore_pmu_state, NULL, 0, 1);
+	if (ret) {
+		DPRINT(("on_each_cpu() failed: %d\n", ret));
+	}
+
+	for_each_online_cpu(i) {
+		pfm_unreserve_session(NULL, 1, i);
+	}
+
+	spin_unlock(&pfm_alt_install_check);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(pfm_remove_alt_pmu_interrupt);
+
 /*
  * perfmon initialization routine, called from the initcall() table
  */
diff --git a/arch/ia64/kernel/ptrace.c b/arch/ia64/kernel/ptrace.c
index 907464e..08c8a5e 100644
--- a/arch/ia64/kernel/ptrace.c
+++ b/arch/ia64/kernel/ptrace.c
@@ -692,16 +692,30 @@ convert_to_non_syscall (struct task_struct *child, struct pt_regs  *pt,
 			unsigned long cfm)
 {
 	struct unw_frame_info info, prev_info;
-	unsigned long ip, pr;
+	unsigned long ip, sp, pr;
 
 	unw_init_from_blocked_task(&info, child);
 	while (1) {
 		prev_info = info;
 		if (unw_unwind(&info) < 0)
 			return;
-		if (unw_get_rp(&info, &ip) < 0)
+
+		unw_get_sp(&info, &sp);
+		if ((long)((unsigned long)child + IA64_STK_OFFSET - sp)
+		    < IA64_PT_REGS_SIZE) {
+			dprintk("ptrace.%s: ran off the top of the kernel "
+				"stack\n", __FUNCTION__);
+			return;
+		}
+		if (unw_get_pr (&prev_info, &pr) < 0) {
+			unw_get_rp(&prev_info, &ip);
+			dprintk("ptrace.%s: failed to read "
+				"predicate register (ip=0x%lx)\n",
+				__FUNCTION__, ip);
 			return;
-		if (ip < FIXADDR_USER_END)
+		}
+		if (unw_is_intr_frame(&info)
+		    && (pr & (1UL << PRED_USER_STACK)))
 			break;
 	}
 
diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c
index 0d5ee57..3865f08 100644
--- a/arch/ia64/kernel/smpboot.c
+++ b/arch/ia64/kernel/smpboot.c
@@ -624,7 +624,7 @@ static struct {
 	__u16   thread_id;
 	__u16   proc_fixed_addr;
 	__u8    valid;
-}mt_info[NR_CPUS] __devinit;
+} mt_info[NR_CPUS] __devinitdata;
 
 #ifdef CONFIG_HOTPLUG_CPU
 static inline void
diff --git a/arch/ia64/kernel/sys_ia64.c b/arch/ia64/kernel/sys_ia64.c
index a8cf6d8..770fab3 100644
--- a/arch/ia64/kernel/sys_ia64.c
+++ b/arch/ia64/kernel/sys_ia64.c
@@ -182,13 +182,6 @@ do_mmap2 (unsigned long addr, unsigned long len, int prot, int flags, int fd, un
 		}
 	}
 
-	/*
-	 * A zero mmap always succeeds in Linux, independent of whether or not the
-	 * remaining arguments are valid.
-	 */
-	if (len == 0)
-		goto out;
-
 	/* Careful about overflows.. */
 	len = PAGE_ALIGN(len);
 	if (!len || len > TASK_SIZE) {
diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c
index 4fb4498..e64cb81 100644
--- a/arch/ia64/sn/kernel/setup.c
+++ b/arch/ia64/sn/kernel/setup.c
@@ -271,6 +271,8 @@ void __init sn_setup(char **cmdline_p)
 	int major = sn_sal_rev_major(), minor = sn_sal_rev_minor();
 	extern void sn_cpu_init(void);
 
+	ia64_sn_plat_set_error_handling_features();
+
 	/*
 	 * If the generic code has enabled vga console support - lets
 	 * get rid of it again. This is a kludge for the fact that ACPI
diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
index cd752a3..54ce6da 100644
--- a/arch/ppc/Kconfig
+++ b/arch/ppc/Kconfig
@@ -1160,12 +1160,12 @@ config PCI_QSPAN
 
 config PCI_8260
 	bool
-	depends on PCI && 8260 && !8272
+	depends on PCI && 8260
 	default y
 
 config 8260_PCI9
 	bool "  Enable workaround for MPC826x erratum PCI 9"
-	depends on PCI_8260
+	depends on PCI_8260 && !ADS8272
 	default y
 
 choice
diff --git a/arch/ppc/boot/images/Makefile b/arch/ppc/boot/images/Makefile
index f850fb0..c9ac5f5 100644
--- a/arch/ppc/boot/images/Makefile
+++ b/arch/ppc/boot/images/Makefile
@@ -22,7 +22,8 @@ targets += uImage
 $(obj)/uImage: $(obj)/vmlinux.gz
 	$(Q)rm -f $@
 	$(call if_changed,uimage)
-	@echo '  Image: $@' $(if $(wildcard $@),'is ready','not made')
+	@echo -n '  Image: $@ '
+	@if [ -f $@ ]; then echo 'is ready' ; else echo 'not made'; fi
 
 # Files generated that shall be removed upon make clean
 clean-files	:= sImage vmapus vmlinux* miboot* zImage* uImage
diff --git a/arch/ppc/configs/mpc8555_cds_defconfig b/arch/ppc/configs/mpc8555_cds_defconfig
index 728bd9e..15abebf 100644
--- a/arch/ppc/configs/mpc8555_cds_defconfig
+++ b/arch/ppc/configs/mpc8555_cds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc1
-# Thu Jan 20 01:25:35 2005
+# Linux kernel version: 2.6.12-rc4
+# Tue May 17 11:56:01 2005
 #
 CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -11,6 +11,7 @@ CONFIG_HAVE_DEC_LOCK=y
 CONFIG_PPC=y
 CONFIG_PPC32=y
 CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 
 #
 # Code maturity level options
@@ -18,6 +19,7 @@ CONFIG_GENERIC_NVRAM=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
@@ -29,12 +31,14 @@ CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_HOTPLUG is not set
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
 CONFIG_EMBEDDED=y
 # CONFIG_KALLSYMS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 # CONFIG_EPOLL is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -44,6 +48,7 @@ CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -62,10 +67,12 @@ CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_E500=y
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
+# CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 CONFIG_MATH_EMULATION=y
 # CONFIG_CPU_FREQ is not set
 CONFIG_PPC_GEN550=y
+# CONFIG_PM is not set
 CONFIG_85xx=y
 CONFIG_PPC_INDIRECT_PCI_BE=y
 
@@ -76,6 +83,7 @@ CONFIG_PPC_INDIRECT_PCI_BE=y
 CONFIG_MPC8555_CDS=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_SBC8560 is not set
+# CONFIG_STX_GP3 is not set
 CONFIG_MPC8555=y
 CONFIG_85xx_PCI2=y
 
@@ -90,6 +98,7 @@ CONFIG_CPM2=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_ISA_DMA_API=y
 
 #
 # Bus options
@@ -105,10 +114,6 @@ CONFIG_PCI_NAMES=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
-#
-
-#
 # Advanced setup
 #
 # CONFIG_ADVANCED_OPTIONS is not set
@@ -180,7 +185,59 @@ CONFIG_IOSCHED_CFQ=y
 #
 # ATA/ATAPI/MFM/RLL support
 #
-# CONFIG_IDE is not set
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_SHARE_IRQ=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+CONFIG_IDEDMA_PCI_AUTO=y
+# CONFIG_IDEDMA_ONLYDISK is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+CONFIG_BLK_DEV_VIA82CXXX=y
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+CONFIG_IDEDMA_AUTO=y
+# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -220,7 +277,6 @@ CONFIG_NET=y
 #
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
@@ -370,14 +426,6 @@ CONFIG_INPUT=y
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -387,6 +435,13 @@ CONFIG_SOUND_GAMEPORT=y
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+
+#
 # Character devices
 #
 # CONFIG_VT is not set
@@ -406,6 +461,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_CPM is not set
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -434,6 +490,11 @@ CONFIG_GEN_RTC=y
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
 # I2C support
 #
 CONFIG_I2C=y
@@ -456,11 +517,11 @@ CONFIG_I2C_CHARDEV=y
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_ISA is not set
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
 # CONFIG_SCx200_ACB is not set
@@ -483,7 +544,9 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_ASB100 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
 # CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
 # CONFIG_SENSORS_LM75 is not set
@@ -494,9 +557,11 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_LM85 is not set
 # CONFIG_SENSORS_LM87 is not set
 # CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_W83781D is not set
@@ -506,10 +571,12 @@ CONFIG_I2C_MPC=y
 #
 # Other I2C Chip support
 #
+# CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_M41T00 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -538,7 +605,6 @@ CONFIG_I2C_MPC=y
 # Graphics support
 #
 # CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -548,13 +614,9 @@ CONFIG_I2C_MPC=y
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
 
 #
 # USB Gadget Support
@@ -585,6 +647,10 @@ CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+
+#
+# XFS support
+#
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -646,7 +712,6 @@ CONFIG_NFS_FS=y
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -698,7 +763,9 @@ CONFIG_CRC32=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_KGDB_CONSOLE is not set
 # CONFIG_SERIAL_TEXT_DEBUG is not set
 
diff --git a/arch/ppc/kernel/head_44x.S b/arch/ppc/kernel/head_44x.S
index 9b6a8e5..6c7ae60 100644
--- a/arch/ppc/kernel/head_44x.S
+++ b/arch/ppc/kernel/head_44x.S
@@ -330,8 +330,9 @@ interrupt_base:
 	/* If we are faulting a kernel address, we have to use the
 	 * kernel page tables.
 	 */
-	andis.	r11, r10, 0x8000
-	beq	3f
+	lis	r11, TASK_SIZE@h
+	cmplw	r10, r11
+	blt+	3f
 	lis	r11, swapper_pg_dir@h
 	ori	r11, r11, swapper_pg_dir@l
 
@@ -464,8 +465,9 @@ interrupt_base:
 	/* If we are faulting a kernel address, we have to use the
 	 * kernel page tables.
 	 */
-	andis.	r11, r10, 0x8000
-	beq	3f
+	lis	r11, TASK_SIZE@h
+	cmplw	r10, r11
+	blt+	3f
 	lis	r11, swapper_pg_dir@h
 	ori	r11, r11, swapper_pg_dir@l
 
@@ -533,8 +535,9 @@ interrupt_base:
 	/* If we are faulting a kernel address, we have to use the
 	 * kernel page tables.
 	 */
-	andis.	r11, r10, 0x8000
-	beq	3f
+	lis	r11, TASK_SIZE@h
+	cmplw	r10, r11
+	blt+	3f
 	lis	r11, swapper_pg_dir@h
 	ori	r11, r11, swapper_pg_dir@l
 
diff --git a/arch/ppc/kernel/head_fsl_booke.S b/arch/ppc/kernel/head_fsl_booke.S
index f22ddce..ce36e88 100644
--- a/arch/ppc/kernel/head_fsl_booke.S
+++ b/arch/ppc/kernel/head_fsl_booke.S
@@ -232,7 +232,8 @@ skpinv:	addi	r6,r6,1				/* Increment */
 	tlbwe
 
 /* 7. Jump to KERNELBASE mapping */
-	li	r7,0
+	lis	r7,MSR_KERNEL@h
+	ori	r7,r7,MSR_KERNEL@l
 	bl	1f			/* Find our address */
 1:	mflr	r9
 	rlwimi	r6,r9,0,20,31
@@ -293,6 +294,18 @@ skpinv:	addi	r6,r6,1				/* Increment */
 	mtspr	SPRN_HID0, r2
 #endif
 
+#if !defined(CONFIG_BDI_SWITCH)
+	/*
+	 * The Abatron BDI JTAG debugger does not tolerate others
+	 * mucking with the debug registers.
+	 */
+	lis	r2,DBCR0_IDM@h
+	mtspr	SPRN_DBCR0,r2
+	/* clear any residual debug events */
+	li	r2,-1
+	mtspr	SPRN_DBSR,r2
+#endif
+
 	/*
 	 * This is where the main kernel code starts.
 	 */
diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c
index 309797d..5c20266 100644
--- a/arch/ppc/kernel/setup.c
+++ b/arch/ppc/kernel/setup.c
@@ -499,7 +499,7 @@ static int __init set_preferred_console(void)
 {
 	struct device_node *prom_stdout;
 	char *name;
-	int offset;
+	int offset = 0;
 
 	if (of_stdout_device == NULL)
 		return -ENODEV;
diff --git a/arch/ppc/kernel/traps.c b/arch/ppc/kernel/traps.c
index f8e7e32..c65731e 100644
--- a/arch/ppc/kernel/traps.c
+++ b/arch/ppc/kernel/traps.c
@@ -408,12 +408,7 @@ static int emulate_string_inst(struct pt_regs *regs, u32 instword)
 
 	/* Early out if we are an invalid form of lswx */
 	if ((instword & INST_STRING_MASK) == INST_LSWX)
-		if ((rA >= rT) || (NB_RB >= rT) || (rT == rA) || (rT == NB_RB))
-			return -EINVAL;
-
-	/* Early out if we are an invalid form of lswi */
-	if ((instword & INST_STRING_MASK) == INST_LSWI)
-		if ((rA >= rT) || (rT == rA))
+		if ((rT == rA) || (rT == NB_RB))
 			return -EINVAL;
 
 	EA = (rA == 0) ? 0 : regs->gpr[rA];
diff --git a/arch/ppc/lib/string.S b/arch/ppc/lib/string.S
index 8d08a2e..36c9b97 100644
--- a/arch/ppc/lib/string.S
+++ b/arch/ppc/lib/string.S
@@ -446,6 +446,7 @@ _GLOBAL(__copy_tofrom_user)
 #ifdef CONFIG_8xx
 	/* Don't use prefetch on 8xx */
 	mtctr	r0
+	li	r0,0
 53:	COPY_16_BYTES_WITHEX(0)
 	bdnz	53b
 
@@ -564,7 +565,9 @@ _GLOBAL(__copy_tofrom_user)
 /* or write fault in cacheline loop */
 105:	li	r9,1
 92:	li	r3,LG_CACHELINE_BYTES
-	b	99f
+	mfctr	r8
+	add	r0,r0,r8
+	b	106f
 /* read fault in final word loop */
 108:	li	r9,0
 	b	93f
@@ -585,7 +588,7 @@ _GLOBAL(__copy_tofrom_user)
  * r5 + (ctr << r3), and r9 is 0 for read or 1 for write.
  */
 99:	mfctr	r0
-	slw	r3,r0,r3
+106:	slw	r3,r0,r3
 	add.	r3,r3,r5
 	beq	120f			/* shouldn't happen */
 	cmpwi	0,r9,0
diff --git a/arch/ppc/mm/init.c b/arch/ppc/mm/init.c
index be02a7f..363c157 100644
--- a/arch/ppc/mm/init.c
+++ b/arch/ppc/mm/init.c
@@ -179,6 +179,7 @@ void free_initmem(void)
 	if (!have_of)
 		FREESEC(openfirmware);
  	printk("\n");
+	ppc_md.progress = NULL;
 #undef FREESEC
 }
 
diff --git a/arch/ppc/platforms/83xx/mpc834x_sys.c b/arch/ppc/platforms/83xx/mpc834x_sys.c
index b3b0f51..e6348b5 100644
--- a/arch/ppc/platforms/83xx/mpc834x_sys.c
+++ b/arch/ppc/platforms/83xx/mpc834x_sys.c
@@ -127,7 +127,6 @@ mpc834x_sys_map_io(void)
 {
 	/* we steal the lowest ioremap addr for virt space */
 	io_block_mapping(VIRT_IMMRBAR, immrbar, 1024*1024, _PAGE_IO);
-	io_block_mapping(BCSR_VIRT_ADDR, BCSR_PHYS_ADDR, BCSR_SIZE, _PAGE_IO);
 }
 
 int
diff --git a/arch/ppc/platforms/83xx/mpc834x_sys.h b/arch/ppc/platforms/83xx/mpc834x_sys.h
index f4d055a..a2f6e49 100644
--- a/arch/ppc/platforms/83xx/mpc834x_sys.h
+++ b/arch/ppc/platforms/83xx/mpc834x_sys.h
@@ -26,9 +26,14 @@
 #define VIRT_IMMRBAR		((uint)0xfe000000)
 
 #define BCSR_PHYS_ADDR		((uint)0xf8000000)
-#define BCSR_VIRT_ADDR		((uint)0xfe100000)
 #define BCSR_SIZE		((uint)(32 * 1024))
 
+#define BCSR_MISC_REG2_OFF	0x07
+#define BCSR_MISC_REG2_PORESET	0x01
+
+#define BCSR_MISC_REG3_OFF	0x08
+#define BCSR_MISC_REG3_CNFLOCK	0x80
+
 #ifdef CONFIG_PCI
 /* PCI interrupt controller */
 #define PIRQA        MPC83xx_IRQ_IRQ4
diff --git a/arch/ppc/platforms/85xx/mpc8540_ads.c b/arch/ppc/platforms/85xx/mpc8540_ads.c
index 4d857d6..583838a 100644
--- a/arch/ppc/platforms/85xx/mpc8540_ads.c
+++ b/arch/ppc/platforms/85xx/mpc8540_ads.c
@@ -210,6 +210,9 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
 #if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG)
 	ppc_md.progress = gen550_progress;
 #endif	/* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */
+#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_KGDB)
+	ppc_md.early_serial_map = mpc85xx_early_serial_map;
+#endif	/* CONFIG_SERIAL_8250 && CONFIG_KGDB */
 
 	if (ppc_md.progress)
 		ppc_md.progress("mpc8540ads_init(): exit", 0);
diff --git a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c
index 6c020d6..e7cfa49 100644
--- a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c
+++ b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c
@@ -44,6 +44,7 @@
 #include <asm/machdep.h>
 #include <asm/prom.h>
 #include <asm/open_pic.h>
+#include <asm/i8259.h>
 #include <asm/bootinfo.h>
 #include <asm/pci-bridge.h>
 #include <asm/mpc85xx.h>
@@ -181,6 +182,7 @@ void __init
 mpc85xx_cds_init_IRQ(void)
 {
 	bd_t *binfo = (bd_t *) __res;
+	int i;
 
 	/* Determine the Physical Address of the OpenPIC regs */
 	phys_addr_t OpenPIC_PAddr = binfo->bi_immr_base + MPC85xx_OPENPIC_OFFSET;
@@ -198,6 +200,15 @@ mpc85xx_cds_init_IRQ(void)
 	 */
 	openpic_init(MPC85xx_OPENPIC_IRQ_OFFSET);
 
+#ifdef CONFIG_PCI
+	openpic_hookup_cascade(PIRQ0A, "82c59 cascade", i8259_irq);
+
+	for (i = 0; i < NUM_8259_INTERRUPTS; i++)
+		irq_desc[i].handler = &i8259_pic;
+
+	i8259_init(0);
+#endif
+
 #ifdef CONFIG_CPM2
 	/* Setup CPM2 PIC */
         cpm2_init_IRQ();
@@ -231,7 +242,7 @@ mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
 			 * interrupt on slot */
 		{
 			{ 0, 1, 2, 3 }, /* 16 - PMC */
-			{ 3, 0, 0, 0 }, /* 17 P2P (Tsi320) */
+			{ 0, 1, 2, 3 }, /* 17 P2P (Tsi320) */
 			{ 0, 1, 2, 3 }, /* 18 - Slot 1 */
 			{ 1, 2, 3, 0 }, /* 19 - Slot 2 */
 			{ 2, 3, 0, 1 }, /* 20 - Slot 3 */
@@ -280,13 +291,135 @@ mpc85xx_exclude_device(u_char bus, u_char devfn)
 			return PCIBIOS_DEVICE_NOT_FOUND;
 #endif
 	/* We explicitly do not go past the Tundra 320 Bridge */
-	if (bus == 1)
+	if ((bus == 1) && (PCI_SLOT(devfn) == ARCADIA_2ND_BRIDGE_IDSEL))
 		return PCIBIOS_DEVICE_NOT_FOUND;
 	if ((bus == 0) && (PCI_SLOT(devfn) == ARCADIA_2ND_BRIDGE_IDSEL))
 		return PCIBIOS_DEVICE_NOT_FOUND;
 	else
 		return PCIBIOS_SUCCESSFUL;
 }
+
+void __init
+mpc85xx_cds_enable_via(struct pci_controller *hose)
+{
+	u32 pci_class;
+	u16 vid, did;
+
+	early_read_config_dword(hose, 0, 0x88, PCI_CLASS_REVISION, &pci_class);
+	if ((pci_class >> 16) != PCI_CLASS_BRIDGE_PCI)
+		return;
+
+	/* Configure P2P so that we can reach bus 1 */
+	early_write_config_byte(hose, 0, 0x88, PCI_PRIMARY_BUS, 0);
+	early_write_config_byte(hose, 0, 0x88, PCI_SECONDARY_BUS, 1);
+	early_write_config_byte(hose, 0, 0x88, PCI_SUBORDINATE_BUS, 0xff);
+
+	early_read_config_word(hose, 1, 0x10, PCI_VENDOR_ID, &vid);
+	early_read_config_word(hose, 1, 0x10, PCI_DEVICE_ID, &did);
+
+	if ((vid != PCI_VENDOR_ID_VIA) ||
+			(did != PCI_DEVICE_ID_VIA_82C686))
+		return;
+
+	/* Enable USB and IDE functions */
+	early_write_config_byte(hose, 1, 0x10, 0x48, 0x08);
+}
+
+void __init
+mpc85xx_cds_fixup_via(struct pci_controller *hose)
+{
+	u32 pci_class;
+	u16 vid, did;
+
+	early_read_config_dword(hose, 0, 0x88, PCI_CLASS_REVISION, &pci_class);
+	if ((pci_class >> 16) != PCI_CLASS_BRIDGE_PCI)
+		return;
+
+	/*
+	 * Force the backplane P2P bridge to have a window
+	 * open from 0x00000000-0x00001fff in PCI I/O space.
+	 * This allows legacy I/O (i8259, etc) on the VIA
+	 * southbridge to be accessed.
+	 */
+	early_write_config_byte(hose, 0, 0x88, PCI_IO_BASE, 0x00);
+	early_write_config_word(hose, 0, 0x88, PCI_IO_BASE_UPPER16, 0x0000);
+	early_write_config_byte(hose, 0, 0x88, PCI_IO_LIMIT, 0x10);
+	early_write_config_word(hose, 0, 0x88, PCI_IO_LIMIT_UPPER16, 0x0000);
+
+	early_read_config_word(hose, 1, 0x10, PCI_VENDOR_ID, &vid);
+	early_read_config_word(hose, 1, 0x10, PCI_DEVICE_ID, &did);
+	if ((vid != PCI_VENDOR_ID_VIA) ||
+			(did != PCI_DEVICE_ID_VIA_82C686))
+		return;
+
+	/*
+	 * Since the P2P window was forced to cover the fixed
+	 * legacy I/O addresses, it is necessary to manually
+	 * place the base addresses for the IDE and USB functions
+	 * within this window.
+	 */
+	/* Function 1, IDE */
+	early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_0, 0x1ff8);
+	early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_1, 0x1ff4);
+	early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_2, 0x1fe8);
+	early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_3, 0x1fe4);
+	early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_4, 0x1fd0);
+
+	/* Function 2, USB ports 0-1 */
+	early_write_config_dword(hose, 1, 0x12, PCI_BASE_ADDRESS_4, 0x1fa0);
+
+	/* Function 3, USB ports 2-3 */
+	early_write_config_dword(hose, 1, 0x13, PCI_BASE_ADDRESS_4, 0x1f80);
+
+	/* Function 5, Power Management */
+	early_write_config_dword(hose, 1, 0x15, PCI_BASE_ADDRESS_0, 0x1e00);
+	early_write_config_dword(hose, 1, 0x15, PCI_BASE_ADDRESS_1, 0x1dfc);
+	early_write_config_dword(hose, 1, 0x15, PCI_BASE_ADDRESS_2, 0x1df8);
+
+	/* Function 6, AC97 Interface */
+	early_write_config_dword(hose, 1, 0x16, PCI_BASE_ADDRESS_0, 0x1c00);
+}
+
+void __init
+mpc85xx_cds_pcibios_fixup(void)
+{
+        struct pci_dev *dev = NULL;
+	u_char		c;
+
+        if ((dev = pci_find_device(PCI_VENDOR_ID_VIA,
+                                        PCI_DEVICE_ID_VIA_82C586_1, NULL))) {
+                /*
+                 * U-Boot does not set the enable bits
+                 * for the IDE device. Force them on here.
+                 */
+                pci_read_config_byte(dev, 0x40, &c);
+                c |= 0x03; /* IDE: Chip Enable Bits */
+                pci_write_config_byte(dev, 0x40, c);
+
+		/*
+		 * Since only primary interface works, force the
+		 * IDE function to standard primary IDE interrupt
+		 * w/ 8259 offset
+		 */
+                dev->irq = 14;
+                pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+        }
+
+	/*
+	 * Force legacy USB interrupt routing
+	 */
+        if ((dev = pci_find_device(PCI_VENDOR_ID_VIA,
+                                        PCI_DEVICE_ID_VIA_82C586_2, NULL))) {
+                dev->irq = 10;
+                pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 10);
+        }
+
+        if ((dev = pci_find_device(PCI_VENDOR_ID_VIA,
+                                        PCI_DEVICE_ID_VIA_82C586_2, dev))) {
+                dev->irq = 11;
+                pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 11);
+        }
+}
 #endif /* CONFIG_PCI */
 
 TODC_ALLOC();
@@ -328,6 +461,9 @@ mpc85xx_cds_setup_arch(void)
 	loops_per_jiffy = freq / HZ;
 
 #ifdef CONFIG_PCI
+	/* VIA IDE configuration */
+        ppc_md.pcibios_fixup = mpc85xx_cds_pcibios_fixup;
+
 	/* setup PCI host bridges */
 	mpc85xx_setup_hose();
 #endif
@@ -459,6 +595,9 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
 #if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG)
 	ppc_md.progress = gen550_progress;
 #endif /* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */
+#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_KGDB)
+	ppc_md.early_serial_map = mpc85xx_early_serial_map;
+#endif	/* CONFIG_SERIAL_8250 && CONFIG_KGDB */
 
 	if (ppc_md.progress)
 		ppc_md.progress("mpc85xx_cds_init(): exit", 0);
diff --git a/arch/ppc/platforms/85xx/mpc85xx_cds_common.h b/arch/ppc/platforms/85xx/mpc85xx_cds_common.h
index 7627d77..12b292c 100644
--- a/arch/ppc/platforms/85xx/mpc85xx_cds_common.h
+++ b/arch/ppc/platforms/85xx/mpc85xx_cds_common.h
@@ -77,4 +77,7 @@
 
 #define MPC85XX_PCI2_IO_SIZE         0x01000000
 
+#define NR_8259_INTS		     16
+#define CPM_IRQ_OFFSET		     NR_8259_INTS
+
 #endif /* __MACH_MPC85XX_CDS_H__ */
diff --git a/arch/ppc/platforms/85xx/sbc8560.c b/arch/ppc/platforms/85xx/sbc8560.c
index 9ab05e5..7b9e154 100644
--- a/arch/ppc/platforms/85xx/sbc8560.c
+++ b/arch/ppc/platforms/85xx/sbc8560.c
@@ -221,6 +221,9 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
 #if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG)
 	ppc_md.progress = gen550_progress;
 #endif	/* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */
+#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_KGDB)
+	ppc_md.early_serial_map = sbc8560_early_serial_map;
+#endif	/* CONFIG_SERIAL_8250 && CONFIG_KGDB */
 
 	if (ppc_md.progress)
 		ppc_md.progress("sbc8560_init(): exit", 0);
diff --git a/arch/ppc/platforms/pmac_cpufreq.c b/arch/ppc/platforms/pmac_cpufreq.c
index f7fb278..937f46d 100644
--- a/arch/ppc/platforms/pmac_cpufreq.c
+++ b/arch/ppc/platforms/pmac_cpufreq.c
@@ -85,14 +85,11 @@ static int no_schedule;
 static int has_cpu_l2lve;
 
 
-#define PMAC_CPU_LOW_SPEED	1
-#define PMAC_CPU_HIGH_SPEED	0
-
 /* There are only two frequency states for each processor. Values
  * are in kHz for the time being.
  */
-#define CPUFREQ_HIGH                  PMAC_CPU_HIGH_SPEED
-#define CPUFREQ_LOW                   PMAC_CPU_LOW_SPEED
+#define CPUFREQ_HIGH                  0
+#define CPUFREQ_LOW                   1
 
 static struct cpufreq_frequency_table pmac_cpu_freqs[] = {
 	{CPUFREQ_HIGH, 		0},
@@ -100,6 +97,11 @@ static struct cpufreq_frequency_table pmac_cpu_freqs[] = {
 	{0,			CPUFREQ_TABLE_END},
 };
 
+static struct freq_attr* pmac_cpu_freqs_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	NULL,
+};
+
 static inline void local_delay(unsigned long ms)
 {
 	if (no_schedule)
@@ -269,6 +271,8 @@ static int __pmac pmu_set_cpu_speed(int low_speed)
 #ifdef DEBUG_FREQ
 	printk(KERN_DEBUG "HID1, before: %x\n", mfspr(SPRN_HID1));
 #endif
+	pmu_suspend();
+
 	/* Disable all interrupt sources on openpic */
  	pic_prio = openpic_get_priority();
 	openpic_set_priority(0xf);
@@ -343,6 +347,8 @@ static int __pmac pmu_set_cpu_speed(int low_speed)
 	debug_calc_bogomips();
 #endif
 
+	pmu_resume();
+
 	preempt_enable();
 
 	return 0;
@@ -355,7 +361,7 @@ static int __pmac do_set_cpu_speed(int speed_mode, int notify)
 	static unsigned long prev_l3cr;
 
 	freqs.old = cur_freq;
-	freqs.new = (speed_mode == PMAC_CPU_HIGH_SPEED) ? hi_freq : low_freq;
+	freqs.new = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq;
 	freqs.cpu = smp_processor_id();
 
 	if (freqs.old == freqs.new)
@@ -363,7 +369,7 @@ static int __pmac do_set_cpu_speed(int speed_mode, int notify)
 
 	if (notify)
 		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-	if (speed_mode == PMAC_CPU_LOW_SPEED &&
+	if (speed_mode == CPUFREQ_LOW &&
 	    cpu_has_feature(CPU_FTR_L3CR)) {
 		l3cr = _get_L3CR();
 		if (l3cr & L3CR_L3E) {
@@ -371,8 +377,8 @@ static int __pmac do_set_cpu_speed(int speed_mode, int notify)
 			_set_L3CR(0);
 		}
 	}
-	set_speed_proc(speed_mode == PMAC_CPU_LOW_SPEED);
-	if (speed_mode == PMAC_CPU_HIGH_SPEED &&
+	set_speed_proc(speed_mode == CPUFREQ_LOW);
+	if (speed_mode == CPUFREQ_HIGH &&
 	    cpu_has_feature(CPU_FTR_L3CR)) {
 		l3cr = _get_L3CR();
 		if ((prev_l3cr & L3CR_L3E) && l3cr != prev_l3cr)
@@ -380,7 +386,7 @@ static int __pmac do_set_cpu_speed(int speed_mode, int notify)
 	}
 	if (notify)
 		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-	cur_freq = (speed_mode == PMAC_CPU_HIGH_SPEED) ? hi_freq : low_freq;
+	cur_freq = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq;
 
 	return 0;
 }
@@ -423,7 +429,8 @@ static int __pmac pmac_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	policy->cpuinfo.transition_latency	= CPUFREQ_ETERNAL;
 	policy->cur = cur_freq;
 
-	return cpufreq_frequency_table_cpuinfo(policy, &pmac_cpu_freqs[0]);
+	cpufreq_frequency_table_get_attr(pmac_cpu_freqs, policy->cpu);
+	return cpufreq_frequency_table_cpuinfo(policy, pmac_cpu_freqs);
 }
 
 static u32 __pmac read_gpio(struct device_node *np)
@@ -457,7 +464,7 @@ static int __pmac pmac_cpufreq_suspend(struct cpufreq_policy *policy, u32 state)
 	no_schedule = 1;
 	sleep_freq = cur_freq;
 	if (cur_freq == low_freq)
-		do_set_cpu_speed(PMAC_CPU_HIGH_SPEED, 0);
+		do_set_cpu_speed(CPUFREQ_HIGH, 0);
 	return 0;
 }
 
@@ -473,8 +480,8 @@ static int __pmac pmac_cpufreq_resume(struct cpufreq_policy *policy)
 	 * is that we force a switch to whatever it was, which is
 	 * probably high speed due to our suspend() routine
 	 */
-	do_set_cpu_speed(sleep_freq == low_freq ? PMAC_CPU_LOW_SPEED
-			 : PMAC_CPU_HIGH_SPEED, 0);
+	do_set_cpu_speed(sleep_freq == low_freq ?
+			 CPUFREQ_LOW : CPUFREQ_HIGH, 0);
 
 	no_schedule = 0;
 	return 0;
@@ -488,6 +495,7 @@ static struct cpufreq_driver pmac_cpufreq_driver = {
 	.suspend	= pmac_cpufreq_suspend,
 	.resume		= pmac_cpufreq_resume,
 	.flags		= CPUFREQ_PM_NO_WARN,
+	.attr		= pmac_cpu_freqs_attr,
 	.name		= "powermac",
 	.owner		= THIS_MODULE,
 };
diff --git a/arch/ppc/platforms/pq2ads.h b/arch/ppc/platforms/pq2ads.h
index cf5e5dd..067d9a5 100644
--- a/arch/ppc/platforms/pq2ads.h
+++ b/arch/ppc/platforms/pq2ads.h
@@ -49,10 +49,10 @@
 /* PCI interrupt controller */
 #define PCI_INT_STAT_REG	0xF8200000
 #define PCI_INT_MASK_REG	0xF8200004
-#define PIRQA			(NR_SIU_INTS + 0)
-#define PIRQB			(NR_SIU_INTS + 1)
-#define PIRQC			(NR_SIU_INTS + 2)
-#define PIRQD			(NR_SIU_INTS + 3)
+#define PIRQA			(NR_CPM_INTS + 0)
+#define PIRQB			(NR_CPM_INTS + 1)
+#define PIRQC			(NR_CPM_INTS + 2)
+#define PIRQD			(NR_CPM_INTS + 3)
 
 /*
  * PCI memory map definitions for MPC8266ADS-PCI.
@@ -68,28 +68,23 @@
  *	0x00000000-0x1FFFFFFF	0x00000000-0x1FFFFFFF	MPC8266 local memory
  */
 
-/* window for a PCI master to access MPC8266 memory */
-#define PCI_SLV_MEM_LOCAL	0x00000000	/* Local base */
-#define PCI_SLV_MEM_BUS		0x00000000	/* PCI base */
+/* All the other PCI memory map definitions reside at syslib/m82xx_pci.h
+   Here we should redefine what is unique for this board */
+#define M82xx_PCI_SLAVE_MEM_LOCAL	0x00000000	/* Local base */
+#define M82xx_PCI_SLAVE_MEM_BUS		0x00000000	/* PCI base */
+#define M82xx_PCI_SLAVE_MEM_SIZE	0x10000000	/* 256 Mb */
 
-/* window for the processor to access PCI memory with prefetching */
-#define PCI_MSTR_MEM_LOCAL	0x80000000	/* Local base */
-#define PCI_MSTR_MEM_BUS	0x80000000	/* PCI base   */
-#define PCI_MSTR_MEM_SIZE	0x20000000	/* 512MB */
+#define M82xx_PCI_SLAVE_SEC_WND_SIZE	~(0x40000000 - 1U)	/* 2 x 512Mb  */
+#define M82xx_PCI_SLAVE_SEC_WND_BASE	0x80000000		/* PCI Memory base */
 
-/* window for the processor to access PCI memory without prefetching */
-#define PCI_MSTR_MEMIO_LOCAL	0xA0000000	/* Local base */
-#define PCI_MSTR_MEMIO_BUS	0xA0000000	/* PCI base   */
-#define PCI_MSTR_MEMIO_SIZE	0x20000000	/* 512MB */
+#if defined(CONFIG_ADS8272)
+#define PCI_INT_TO_SIU 	SIU_INT_IRQ2
+#elif defined(CONFIG_PQ2FADS)
+#define PCI_INT_TO_SIU 	SIU_INT_IRQ6
+#else
+#warning PCI Bridge will be without interrupts support
+#endif
 
-/* window for the processor to access PCI I/O */
-#define PCI_MSTR_IO_LOCAL	0xF4000000	/* Local base */
-#define PCI_MSTR_IO_BUS         0x00000000	/* PCI base   */
-#define PCI_MSTR_IO_SIZE        0x04000000	/* 64MB */
-
-#define _IO_BASE		PCI_MSTR_IO_LOCAL
-#define _ISA_MEM_BASE		PCI_MSTR_MEMIO_LOCAL
-#define PCI_DRAM_OFFSET		PCI_SLV_MEM_BUS
 #endif /* CONFIG_PCI */
 
 #endif /* __MACH_ADS8260_DEFS */
diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile
index dd418ea..96acf85 100644
--- a/arch/ppc/syslib/Makefile
+++ b/arch/ppc/syslib/Makefile
@@ -81,7 +81,7 @@ obj-$(CONFIG_SBC82xx)		+= todc_time.o
 obj-$(CONFIG_SPRUCE)		+= cpc700_pic.o indirect_pci.o pci_auto.o \
 				   todc_time.o
 obj-$(CONFIG_8260)		+= m8260_setup.o
-obj-$(CONFIG_PCI_8260)		+= m8260_pci.o indirect_pci.o
+obj-$(CONFIG_PCI_8260)		+= m82xx_pci.o indirect_pci.o pci_auto.o
 obj-$(CONFIG_8260_PCI9)		+= m8260_pci_erratum9.o
 obj-$(CONFIG_CPM2)		+= cpm2_common.o cpm2_pic.o
 ifeq ($(CONFIG_PPC_GEN550),y)
@@ -97,7 +97,7 @@ obj-$(CONFIG_MPC10X_OPENPIC)	+= open_pic.o
 obj-$(CONFIG_40x)		+= dcr.o
 obj-$(CONFIG_BOOKE)		+= dcr.o
 obj-$(CONFIG_85xx)		+= open_pic.o ppc85xx_common.o ppc85xx_setup.o \
-					ppc_sys.o mpc85xx_sys.o \
+					ppc_sys.o i8259.o mpc85xx_sys.o \
 					mpc85xx_devices.o
 ifeq ($(CONFIG_85xx),y)
 obj-$(CONFIG_PCI)		+= indirect_pci.o pci_auto.o
diff --git a/arch/ppc/syslib/ipic.c b/arch/ppc/syslib/ipic.c
index acb2cde..580ed65 100644
--- a/arch/ppc/syslib/ipic.c
+++ b/arch/ppc/syslib/ipic.c
@@ -479,7 +479,7 @@ void __init ipic_init(phys_addr_t phys_addr,
 	temp = 0;
 	for (i = 0 ; i < senses_count ; i++) {
 		if ((senses[i] & IRQ_SENSE_MASK) == IRQ_SENSE_EDGE) {
-			temp |= 1 << (16 - i);
+			temp |= 1 << (15 - i);
 			if (i != 0)
 				irq_desc[i + irq_offset + MPC83xx_IRQ_EXT1 - 1].status = 0;
 			else
diff --git a/arch/ppc/syslib/m8260_pci.c b/arch/ppc/syslib/m8260_pci.c
deleted file mode 100644
index 057cc3f..0000000
--- a/arch/ppc/syslib/m8260_pci.c
+++ /dev/null
@@ -1,193 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2004 Red Hat, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <asm/immap_cpm2.h>
-#include <asm/mpc8260.h>
-
-#include "m8260_pci.h"
-
-
-/* PCI bus configuration registers.
- */
-
-static void __init m8260_setup_pci(struct pci_controller *hose)
-{
-	volatile cpm2_map_t *immap = cpm2_immr;
-	unsigned long pocmr;
-	u16 tempShort;
-
-#ifndef CONFIG_ATC 	/* already done in U-Boot */
-	/* 
-	 * Setting required to enable IRQ1-IRQ7 (SIUMCR [DPPC]), 
-	 * and local bus for PCI (SIUMCR [LBPC]).
-	 */
-	immap->im_siu_conf.siu_82xx.sc_siumcr = 0x00640000;
-#endif
-
-	/* Make PCI lowest priority */
-	/* Each 4 bits is a device bus request  and the MS 4bits 
-	   is highest priority */
-	/* Bus               4bit value 
-	   ---               ----------
-	   CPM high          0b0000
-	   CPM middle        0b0001
-	   CPM low           0b0010
-	   PCI reguest       0b0011
-	   Reserved          0b0100
-	   Reserved          0b0101
-	   Internal Core     0b0110
-	   External Master 1 0b0111
-	   External Master 2 0b1000
-	   External Master 3 0b1001
-	   The rest are reserved */
-	immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x61207893;
-
-	/* Park bus on core while modifying PCI Bus accesses */
-	immap->im_siu_conf.siu_82xx.sc_ppc_acr = 0x6;
-
-	/* 
-	 * Set up master window that allows the CPU to access PCI space. This 
-	 * window is set up using the first SIU PCIBR registers.
-	 */
-	immap->im_memctl.memc_pcimsk0 = MPC826x_PCI_MASK;
-	immap->im_memctl.memc_pcibr0 =	MPC826x_PCI_BASE | PCIBR_ENABLE;
-
-	/* Disable machine check on no response or target abort */
-	immap->im_pci.pci_emr = cpu_to_le32(0x1fe7);
-	/* Release PCI RST (by default the PCI RST signal is held low)  */
-	immap->im_pci.pci_gcr = cpu_to_le32(PCIGCR_PCI_BUS_EN);
-
-	/* give it some time */
-	mdelay(1);
-
-	/* 
-	 * Set up master window that allows the CPU to access PCI Memory (prefetch) 
-	 * space. This window is set up using the first set of Outbound ATU registers.
-	 */
-	immap->im_pci.pci_potar0 = cpu_to_le32(MPC826x_PCI_LOWER_MEM >> 12);
-	immap->im_pci.pci_pobar0 = cpu_to_le32((MPC826x_PCI_LOWER_MEM - MPC826x_PCI_MEM_OFFSET) >> 12);
-	pocmr = ((MPC826x_PCI_UPPER_MEM - MPC826x_PCI_LOWER_MEM) >> 12) ^ 0xfffff;
-	immap->im_pci.pci_pocmr0 = cpu_to_le32(pocmr | POCMR_ENABLE | POCMR_PREFETCH_EN);
-
-	/* 
-	 * Set up master window that allows the CPU to access PCI Memory (non-prefetch) 
-	 * space. This window is set up using the second set of Outbound ATU registers.
-	 */
-	immap->im_pci.pci_potar1 = cpu_to_le32(MPC826x_PCI_LOWER_MMIO >> 12);
-	immap->im_pci.pci_pobar1 = cpu_to_le32((MPC826x_PCI_LOWER_MMIO - MPC826x_PCI_MMIO_OFFSET) >> 12);
-	pocmr = ((MPC826x_PCI_UPPER_MMIO - MPC826x_PCI_LOWER_MMIO) >> 12) ^ 0xfffff;
-	immap->im_pci.pci_pocmr1 = cpu_to_le32(pocmr | POCMR_ENABLE);
-
-	/* 
-	 * Set up master window that allows the CPU to access PCI IO space. This window
-	 * is set up using the third set of Outbound ATU registers.
-	 */
-	immap->im_pci.pci_potar2 = cpu_to_le32(MPC826x_PCI_IO_BASE >> 12);
-	immap->im_pci.pci_pobar2 = cpu_to_le32(MPC826x_PCI_LOWER_IO >> 12);
-	pocmr = ((MPC826x_PCI_UPPER_IO - MPC826x_PCI_LOWER_IO) >> 12) ^ 0xfffff;
-	immap->im_pci.pci_pocmr2 = cpu_to_le32(pocmr | POCMR_ENABLE | POCMR_PCI_IO);
-
-	/* 
-	 * Set up slave window that allows PCI masters to access MPC826x local memory. 
-	 * This window is set up using the first set of Inbound ATU registers
-	 */
-
-	immap->im_pci.pci_pitar0 = cpu_to_le32(MPC826x_PCI_SLAVE_MEM_LOCAL >> 12);
-	immap->im_pci.pci_pibar0 = cpu_to_le32(MPC826x_PCI_SLAVE_MEM_BUS >> 12);
-	pocmr = ((MPC826x_PCI_SLAVE_MEM_SIZE-1) >> 12) ^ 0xfffff;
-	immap->im_pci.pci_picmr0 = cpu_to_le32(pocmr | PICMR_ENABLE | PICMR_PREFETCH_EN);
-
-	/* See above for description - puts PCI request as highest priority */
-	immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x03124567;
-
-	/* Park the bus on the PCI */
-	immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_PCI;
-
-	/* Host mode - specify the bridge as a host-PCI bridge */
-	early_write_config_word(hose, 0, 0, PCI_CLASS_DEVICE, PCI_CLASS_BRIDGE_HOST);
-
-	/* Enable the host bridge to be a master on the PCI bus, and to act as a PCI memory target */
-	early_read_config_word(hose, 0, 0, PCI_COMMAND, &tempShort);
-	early_write_config_word(hose, 0, 0, PCI_COMMAND,
-				tempShort | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
-}
-
-void __init m8260_find_bridges(void)
-{
-	extern int pci_assign_all_busses;
-	struct pci_controller * hose;
-
-	pci_assign_all_busses = 1;
-
-	hose = pcibios_alloc_controller();
-
-	if (!hose)
-		return;
-
-	ppc_md.pci_swizzle = common_swizzle;
-
-	hose->first_busno = 0;
-	hose->bus_offset = 0;
-	hose->last_busno = 0xff;
-
-	setup_m8260_indirect_pci(hose, 
-				 (unsigned long)&cpm2_immr->im_pci.pci_cfg_addr,
-				 (unsigned long)&cpm2_immr->im_pci.pci_cfg_data);
-
-	m8260_setup_pci(hose);
-        hose->pci_mem_offset = MPC826x_PCI_MEM_OFFSET;
-
-        hose->io_base_virt = ioremap(MPC826x_PCI_IO_BASE,
-                                        MPC826x_PCI_IO_SIZE);
-        isa_io_base = (unsigned long) hose->io_base_virt;
- 
-        /* setup resources */
-        pci_init_resource(&hose->mem_resources[0],
-			  MPC826x_PCI_LOWER_MEM,
-			  MPC826x_PCI_UPPER_MEM,
-			  IORESOURCE_MEM|IORESOURCE_PREFETCH, "PCI prefetchable memory");
-
-        pci_init_resource(&hose->mem_resources[1],
-			  MPC826x_PCI_LOWER_MMIO,
-			  MPC826x_PCI_UPPER_MMIO,
-			  IORESOURCE_MEM, "PCI memory");
-
-        pci_init_resource(&hose->io_resource,
-			  MPC826x_PCI_LOWER_IO,
-			  MPC826x_PCI_UPPER_IO,
-			  IORESOURCE_IO, "PCI I/O");
-}
diff --git a/arch/ppc/syslib/m8260_pci.h b/arch/ppc/syslib/m8260_pci.h
deleted file mode 100644
index d1352120..0000000
--- a/arch/ppc/syslib/m8260_pci.h
+++ /dev/null
@@ -1,76 +0,0 @@
-
-#ifndef _PPC_KERNEL_M8260_PCI_H
-#define _PPC_KERNEL_M8260_PCI_H
-
-#include <asm/m8260_pci.h>
-
-/*
- *   Local->PCI map (from CPU)                             controlled by
- *   MPC826x master window
- *
- *   0x80000000 - 0xBFFFFFFF    Total CPU2PCI space        PCIBR0
- *                       
- *   0x80000000 - 0x9FFFFFFF    PCI Mem with prefetch      (Outbound ATU #1)
- *   0xA0000000 - 0xAFFFFFFF    PCI Mem w/o  prefetch      (Outbound ATU #2)
- *   0xB0000000 - 0xB0FFFFFF    32-bit PCI IO              (Outbound ATU #3)
- *                      
- *   PCI->Local map (from PCI)
- *   MPC826x slave window                                  controlled by
- *
- *   0x00000000 - 0x07FFFFFF    MPC826x local memory       (Inbound ATU #1)
- */
-
-/* 
- * Slave window that allows PCI masters to access MPC826x local memory. 
- * This window is set up using the first set of Inbound ATU registers
- */
-
-#ifndef MPC826x_PCI_SLAVE_MEM_LOCAL
-#define MPC826x_PCI_SLAVE_MEM_LOCAL	(((struct bd_info *)__res)->bi_memstart)
-#define MPC826x_PCI_SLAVE_MEM_BUS	(((struct bd_info *)__res)->bi_memstart)
-#define MPC826x_PCI_SLAVE_MEM_SIZE	(((struct bd_info *)__res)->bi_memsize)
-#endif
-
-/* 
- * This is the window that allows the CPU to access PCI address space.
- * It will be setup with the SIU PCIBR0 register. All three PCI master
- * windows, which allow the CPU to access PCI prefetch, non prefetch,
- * and IO space (see below), must all fit within this window. 
- */
-#ifndef MPC826x_PCI_BASE
-#define MPC826x_PCI_BASE	0x80000000
-#define MPC826x_PCI_MASK	0xc0000000
-#endif
-
-#ifndef MPC826x_PCI_LOWER_MEM
-#define MPC826x_PCI_LOWER_MEM  0x80000000
-#define MPC826x_PCI_UPPER_MEM  0x9fffffff
-#define MPC826x_PCI_MEM_OFFSET 0x00000000
-#endif
-
-#ifndef MPC826x_PCI_LOWER_MMIO
-#define MPC826x_PCI_LOWER_MMIO  0xa0000000
-#define MPC826x_PCI_UPPER_MMIO  0xafffffff
-#define MPC826x_PCI_MMIO_OFFSET 0x00000000
-#endif
-
-#ifndef MPC826x_PCI_LOWER_IO
-#define MPC826x_PCI_LOWER_IO   0x00000000
-#define MPC826x_PCI_UPPER_IO   0x00ffffff
-#define MPC826x_PCI_IO_BASE    0xb0000000
-#define MPC826x_PCI_IO_SIZE    0x01000000
-#endif
-
-#ifndef _IO_BASE
-#define _IO_BASE isa_io_base
-#endif
-
-#ifdef CONFIG_8260_PCI9
-struct pci_controller;
-extern void setup_m8260_indirect_pci(struct pci_controller* hose,
-				     u32 cfg_addr, u32 cfg_data);
-#else
-#define setup_m8260_indirect_pci setup_indirect_pci
-#endif
-
-#endif /* _PPC_KERNEL_M8260_PCI_H */
diff --git a/arch/ppc/syslib/m8260_pci_erratum9.c b/arch/ppc/syslib/m8260_pci_erratum9.c
index 9c0582d..1dc7e4e 100644
--- a/arch/ppc/syslib/m8260_pci_erratum9.c
+++ b/arch/ppc/syslib/m8260_pci_erratum9.c
@@ -31,7 +31,7 @@
 #include <asm/immap_cpm2.h>
 #include <asm/cpm2.h>
 
-#include "m8260_pci.h"
+#include "m82xx_pci.h"
 
 #ifdef CONFIG_8260_PCI9
 /*#include <asm/mpc8260_pci9.h>*/ /* included in asm/io.h */
@@ -248,11 +248,11 @@ EXPORT_SYMBOL(idma_pci9_read_le);
 
 static inline int is_pci_mem(unsigned long addr)
 {
-	if (addr >= MPC826x_PCI_LOWER_MMIO &&
-	    addr <= MPC826x_PCI_UPPER_MMIO)
+	if (addr >= M82xx_PCI_LOWER_MMIO &&
+		addr <= M82xx_PCI_UPPER_MMIO)
 		return 1;
-	if (addr >= MPC826x_PCI_LOWER_MEM &&
-	    addr <= MPC826x_PCI_UPPER_MEM)
+	if (addr >= M82xx_PCI_LOWER_MEM &&
+		addr <= M82xx_PCI_UPPER_MEM)
 		return 1;
 	return 0;
 }
diff --git a/arch/ppc/syslib/m8260_setup.c b/arch/ppc/syslib/m8260_setup.c
index 23ea3f69..fda75d7 100644
--- a/arch/ppc/syslib/m8260_setup.c
+++ b/arch/ppc/syslib/m8260_setup.c
@@ -34,7 +34,8 @@
 unsigned char __res[sizeof(bd_t)];
 
 extern void cpm2_reset(void);
-extern void m8260_find_bridges(void);
+extern void pq2_find_bridges(void);
+extern void pq2pci_init_irq(void);
 extern void idma_pci9_init(void);
 
 /* Place-holder for board-specific init */
@@ -56,7 +57,7 @@ m8260_setup_arch(void)
 	idma_pci9_init();
 #endif
 #ifdef CONFIG_PCI_8260
-	m8260_find_bridges();
+	pq2_find_bridges();
 #endif
 #ifdef CONFIG_BLK_DEV_INITRD
 	if (initrd_start)
@@ -173,6 +174,12 @@ m8260_init_IRQ(void)
 	 * in case the boot rom changed something on us.
 	 */
 	cpm2_immr->im_intctl.ic_siprr = 0x05309770;
+
+#if defined(CONFIG_PCI) && (defined(CONFIG_ADS8272) || defined(CONFIG_PQ2FADS))
+ 	/* Initialize stuff for the 82xx CPLD IC and install demux  */
+ 	pq2pci_init_irq();
+#endif
+
 }
 
 /*
diff --git a/arch/ppc/syslib/m82xx_pci.c b/arch/ppc/syslib/m82xx_pci.c
new file mode 100644
index 0000000..5e7a7ed
--- /dev/null
+++ b/arch/ppc/syslib/m82xx_pci.c
@@ -0,0 +1,383 @@
+/*
+ *
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2004 Red Hat, Inc.
+ *
+ * 2005 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/immap_cpm2.h>
+#include <asm/mpc8260.h>
+#include <asm/cpm2.h>
+
+#include "m82xx_pci.h"
+
+/*
+ * Interrupt routing
+ */
+
+static inline int
+pq2pci_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+{
+	static char pci_irq_table[][4] =
+	/*
+	 *	PCI IDSEL/INTPIN->INTLINE
+	 * 	  A      B      C      D
+	 */
+	{
+		{ PIRQA, PIRQB, PIRQC, PIRQD },	/* IDSEL 22 - PCI slot 0 */
+		{ PIRQD, PIRQA, PIRQB, PIRQC },	/* IDSEL 23 - PCI slot 1 */
+		{ PIRQC, PIRQD, PIRQA, PIRQB },	/* IDSEL 24 - PCI slot 2 */
+	};
+
+	const long min_idsel = 22, max_idsel = 24, irqs_per_slot = 4;
+	return PCI_IRQ_TABLE_LOOKUP;
+}
+
+static void
+pq2pci_mask_irq(unsigned int irq)
+{
+	int bit = irq - NR_CPM_INTS;
+
+	*(volatile unsigned long *) PCI_INT_MASK_REG |= (1 << (31 - bit));
+	return;
+}
+
+static void
+pq2pci_unmask_irq(unsigned int irq)
+{
+	int bit = irq - NR_CPM_INTS;
+
+	*(volatile unsigned long *) PCI_INT_MASK_REG &= ~(1 << (31 - bit));
+	return;
+}
+
+static void
+pq2pci_mask_and_ack(unsigned int irq)
+{
+	int bit = irq - NR_CPM_INTS;
+
+	*(volatile unsigned long *) PCI_INT_MASK_REG |= (1 << (31 - bit));
+	return;
+}
+
+static void
+pq2pci_end_irq(unsigned int irq)
+{
+	int bit = irq - NR_CPM_INTS;
+
+	*(volatile unsigned long *) PCI_INT_MASK_REG &= ~(1 << (31 - bit));
+	return;
+}
+
+struct hw_interrupt_type pq2pci_ic = {
+	"PQ2 PCI",
+	NULL,
+	NULL,
+	pq2pci_unmask_irq,
+	pq2pci_mask_irq,
+	pq2pci_mask_and_ack,
+	pq2pci_end_irq,
+	0
+};
+
+static irqreturn_t
+pq2pci_irq_demux(int irq, void *dev_id, struct pt_regs *regs)
+{
+	unsigned long stat, mask, pend;
+	int bit;
+
+	for(;;) {
+		stat = *(volatile unsigned long *) PCI_INT_STAT_REG;
+		mask = *(volatile unsigned long *) PCI_INT_MASK_REG;
+		pend = stat & ~mask & 0xf0000000;
+		if (!pend)
+			break;
+		for (bit = 0; pend != 0; ++bit, pend <<= 1) {
+			if (pend & 0x80000000)
+				__do_IRQ(NR_CPM_INTS + bit, regs);
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction pq2pci_irqaction = {
+	.handler = pq2pci_irq_demux,
+	.flags 	 = SA_INTERRUPT,
+	.mask	 = CPU_MASK_NONE,
+	.name	 = "PQ2 PCI cascade",
+};
+
+
+void
+pq2pci_init_irq(void)
+{
+	int irq;
+	volatile cpm2_map_t *immap = cpm2_immr;
+#if defined CONFIG_ADS8272
+	/* configure chip select for PCI interrupt controller */
+	immap->im_memctl.memc_br3 = PCI_INT_STAT_REG | 0x00001801;
+	immap->im_memctl.memc_or3 = 0xffff8010;
+#elif defined CONFIG_PQ2FADS
+	immap->im_memctl.memc_br8 = PCI_INT_STAT_REG | 0x00001801;
+	immap->im_memctl.memc_or8 = 0xffff8010;
+#endif
+	for (irq = NR_CPM_INTS; irq < NR_CPM_INTS + 4; irq++)
+		irq_desc[irq].handler = &pq2pci_ic;
+
+	/* make PCI IRQ level sensitive */
+	immap->im_intctl.ic_siexr &=
+		~(1 << (14 - (PCI_INT_TO_SIU - SIU_INT_IRQ1)));
+
+	/* mask all PCI interrupts */
+	*(volatile unsigned long *) PCI_INT_MASK_REG |= 0xfff00000;
+
+	/* install the demultiplexer for the PCI cascade interrupt */
+	setup_irq(PCI_INT_TO_SIU, &pq2pci_irqaction);
+	return;
+}
+
+static int
+pq2pci_exclude_device(u_char bus, u_char devfn)
+{
+	return PCIBIOS_SUCCESSFUL;
+}
+
+/* PCI bus configuration registers.
+ */
+static void
+pq2ads_setup_pci(struct pci_controller *hose)
+{
+	__u32 val;
+	volatile cpm2_map_t *immap = cpm2_immr;
+	bd_t* binfo = (bd_t*) __res;
+	u32 sccr = immap->im_clkrst.car_sccr;
+	uint pci_div,freq,time;
+		/* PCI int lowest prio */
+	/* Each 4 bits is a device bus request	and the MS 4bits
+	 is highest priority */
+	/* Bus                4bit value
+	   ---                ----------
+	   CPM high      	0b0000
+	   CPM middle           0b0001
+	   CPM low       	0b0010
+	   PCI reguest          0b0011
+	   Reserved      	0b0100
+	   Reserved      	0b0101
+	   Internal Core     	0b0110
+	   External Master 1 	0b0111
+	   External Master 2 	0b1000
+	   External Master 3 	0b1001
+	   The rest are reserved
+	 */
+	immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x61207893;
+	/* park bus on core */
+	immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_CORE;
+	/*
+	 * Set up master windows that allow the CPU to access PCI space. These
+	 * windows are set up using the two SIU PCIBR registers.
+	 */
+
+	immap->im_memctl.memc_pcimsk0 = M82xx_PCI_PRIM_WND_SIZE;
+	immap->im_memctl.memc_pcibr0  = M82xx_PCI_PRIM_WND_BASE | PCIBR_ENABLE;
+
+#ifdef M82xx_PCI_SEC_WND_SIZE
+	immap->im_memctl.memc_pcimsk1 = M82xx_PCI_SEC_WND_SIZE;
+	immap->im_memctl.memc_pcibr1  = M82xx_PCI_SEC_WND_BASE | PCIBR_ENABLE;
+#endif
+
+#if defined CONFIG_ADS8272
+	immap->im_siu_conf.siu_82xx.sc_siumcr =
+		(immap->im_siu_conf.siu_82xx.sc_siumcr &
+		~(SIUMCR_BBD | SIUMCR_ESE | SIUMCR_PBSE |
+		SIUMCR_CDIS | SIUMCR_DPPC11 | SIUMCR_L2CPC11 |
+		SIUMCR_LBPC11 | SIUMCR_APPC11 |
+		SIUMCR_CS10PC11 | SIUMCR_BCTLC11 | SIUMCR_MMR11)) |
+		SIUMCR_DPPC11 | SIUMCR_L2CPC01 | SIUMCR_LBPC00 |
+		SIUMCR_APPC10 | SIUMCR_CS10PC00 |
+		SIUMCR_BCTLC00 | SIUMCR_MMR11 ;
+
+#elif defined CONFIG_PQ2FADS
+	/*
+	 * Setting required to enable IRQ1-IRQ7 (SIUMCR [DPPC]),
+	 * and local bus for PCI (SIUMCR [LBPC]).
+	 */
+	immap->im_siu_conf.siu_82xx.sc_siumcr = (immap->im_siu_conf.sc_siumcr &
+				~(SIUMCR_L2PC11 | SIUMCR_LBPC11 | SIUMCR_CS10PC11 | SIUMCR_APPC11) |
+				SIUMCR_BBD | SIUMCR_LBPC01 | SIUMCR_DPPC11 | SIUMCR_APPC10;
+#endif
+	/* Enable PCI  */
+	immap->im_pci.pci_gcr = cpu_to_le32(PCIGCR_PCI_BUS_EN);
+
+	pci_div = ( (sccr & SCCR_PCI_MODCK) ? 2 : 1) *
+			( ( (sccr & SCCR_PCIDF_MSK) >> SCCR_PCIDF_SHIFT) + 1);
+	freq = (uint)((2*binfo->bi_cpmfreq)/(pci_div));
+	time = (int)666666/freq;
+	/* due to PCI Local Bus spec, some devices needs to wait such a long
+	time after RST 	deassertion. More specifically, 0.508s for 66MHz & twice more for 33 */
+	printk("%s: The PCI bus is %d Mhz.\nWaiting %s after deasserting RST...\n",__FILE__,freq,
+	(time==1) ? "0.5 seconds":"1 second" );
+
+	{
+		int i;
+		for(i=0;i<(500*time);i++)
+			udelay(1000);
+	}
+
+	/* setup ATU registers */
+	immap->im_pci.pci_pocmr0 = cpu_to_le32(POCMR_ENABLE | POCMR_PCI_IO |
+				((~(M82xx_PCI_IO_SIZE - 1U)) >> POTA_ADDR_SHIFT));
+	immap->im_pci.pci_potar0 = cpu_to_le32(M82xx_PCI_LOWER_IO >> POTA_ADDR_SHIFT);
+	immap->im_pci.pci_pobar0 = cpu_to_le32(M82xx_PCI_IO_BASE >> POTA_ADDR_SHIFT);
+
+	/* Set-up non-prefetchable window */
+	immap->im_pci.pci_pocmr1 = cpu_to_le32(POCMR_ENABLE | ((~(M82xx_PCI_MMIO_SIZE-1U)) >> POTA_ADDR_SHIFT));
+	immap->im_pci.pci_potar1 = cpu_to_le32(M82xx_PCI_LOWER_MMIO >> POTA_ADDR_SHIFT);
+	immap->im_pci.pci_pobar1 = cpu_to_le32((M82xx_PCI_LOWER_MMIO - M82xx_PCI_MMIO_OFFSET) >> POTA_ADDR_SHIFT);
+
+	/* Set-up prefetchable window */
+	immap->im_pci.pci_pocmr2 = cpu_to_le32(POCMR_ENABLE |POCMR_PREFETCH_EN |
+		(~(M82xx_PCI_MEM_SIZE-1U) >> POTA_ADDR_SHIFT));
+	immap->im_pci.pci_potar2 = cpu_to_le32(M82xx_PCI_LOWER_MEM >> POTA_ADDR_SHIFT);
+	immap->im_pci.pci_pobar2 = cpu_to_le32((M82xx_PCI_LOWER_MEM - M82xx_PCI_MEM_OFFSET) >> POTA_ADDR_SHIFT);
+
+ 	/* Inbound transactions from PCI memory space */
+	immap->im_pci.pci_picmr0 = cpu_to_le32(PICMR_ENABLE | PICMR_PREFETCH_EN |
+					((~(M82xx_PCI_SLAVE_MEM_SIZE-1U)) >> PITA_ADDR_SHIFT));
+	immap->im_pci.pci_pibar0 = cpu_to_le32(M82xx_PCI_SLAVE_MEM_BUS  >> PITA_ADDR_SHIFT);
+	immap->im_pci.pci_pitar0 = cpu_to_le32(M82xx_PCI_SLAVE_MEM_LOCAL>> PITA_ADDR_SHIFT);
+
+#if defined CONFIG_ADS8272
+	/* PCI int highest prio */
+	immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x01236745;
+#elif defined CONFIG_PQ2FADS
+	immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x03124567;
+#endif
+	/* park bus on PCI */
+	immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_PCI;
+
+	/* Enable bus mastering and inbound memory transactions */
+	early_read_config_dword(hose, hose->first_busno, 0, PCI_COMMAND, &val);
+	val &= 0xffff0000;
+	val |= PCI_COMMAND_MEMORY|PCI_COMMAND_MASTER;
+	early_write_config_dword(hose, hose->first_busno, 0, PCI_COMMAND, val);
+
+}
+
+void __init pq2_find_bridges(void)
+{
+	extern int pci_assign_all_busses;
+	struct pci_controller * hose;
+	int host_bridge;
+
+	pci_assign_all_busses = 1;
+
+	hose = pcibios_alloc_controller();
+
+	if (!hose)
+		return;
+
+	ppc_md.pci_swizzle = common_swizzle;
+
+	hose->first_busno = 0;
+	hose->bus_offset = 0;
+	hose->last_busno = 0xff;
+
+#ifdef CONFIG_ADS8272
+	hose->set_cfg_type = 1;
+#endif
+
+	setup_m8260_indirect_pci(hose,
+				 (unsigned long)&cpm2_immr->im_pci.pci_cfg_addr,
+				 (unsigned long)&cpm2_immr->im_pci.pci_cfg_data);
+
+	/* Make sure it is a supported bridge */
+	early_read_config_dword(hose,
+				0,
+				PCI_DEVFN(0,0),
+				PCI_VENDOR_ID,
+				&host_bridge);
+	switch (host_bridge) {
+		case PCI_DEVICE_ID_MPC8265:
+			break;
+		case PCI_DEVICE_ID_MPC8272:
+			break;
+		default:
+			printk("Attempting to use unrecognized host bridge ID"
+				" 0x%08x.\n", host_bridge);
+			break;
+	}
+
+	pq2ads_setup_pci(hose);
+
+	hose->io_space.start =	M82xx_PCI_LOWER_IO;
+	hose->io_space.end = M82xx_PCI_UPPER_IO;
+	hose->mem_space.start = M82xx_PCI_LOWER_MEM;
+	hose->mem_space.end = M82xx_PCI_UPPER_MMIO;
+	hose->pci_mem_offset = M82xx_PCI_MEM_OFFSET;
+
+	isa_io_base =
+	(unsigned long) ioremap(M82xx_PCI_IO_BASE,
+					M82xx_PCI_IO_SIZE);
+	hose->io_base_virt = (void *) isa_io_base;
+
+	/* setup resources */
+	pci_init_resource(&hose->mem_resources[0],
+			M82xx_PCI_LOWER_MEM,
+			M82xx_PCI_UPPER_MEM,
+			IORESOURCE_MEM|IORESOURCE_PREFETCH, "PCI prefetchable memory");
+
+	pci_init_resource(&hose->mem_resources[1],
+			M82xx_PCI_LOWER_MMIO,
+			M82xx_PCI_UPPER_MMIO,
+			IORESOURCE_MEM, "PCI memory");
+
+	pci_init_resource(&hose->io_resource,
+			M82xx_PCI_LOWER_IO,
+			M82xx_PCI_UPPER_IO,
+			IORESOURCE_IO | 1, "PCI I/O");
+
+	ppc_md.pci_exclude_device = pq2pci_exclude_device;
+	hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
+
+	ppc_md.pci_map_irq = pq2pci_map_irq;
+	ppc_md.pcibios_fixup = NULL;
+	ppc_md.pcibios_fixup_bus = NULL;
+
+}
diff --git a/arch/ppc/syslib/m82xx_pci.h b/arch/ppc/syslib/m82xx_pci.h
new file mode 100644
index 0000000..924f73f
--- /dev/null
+++ b/arch/ppc/syslib/m82xx_pci.h
@@ -0,0 +1,92 @@
+
+#ifndef _PPC_KERNEL_M82XX_PCI_H
+#define _PPC_KERNEL_M82XX_PCI_H
+
+#include <asm/m8260_pci.h>
+/*
+ *   Local->PCI map (from CPU)                             controlled by
+ *   MPC826x master window
+ *
+ *   0xF6000000 - 0xF7FFFFFF    IO space
+ *   0x80000000 - 0xBFFFFFFF    CPU2PCI memory space       PCIBR0
+ *
+ *   0x80000000 - 0x9FFFFFFF    PCI Mem with prefetch      (Outbound ATU #1)
+ *   0xA0000000 - 0xBFFFFFFF    PCI Mem w/o  prefetch      (Outbound ATU #2)
+ *   0xF6000000 - 0xF7FFFFFF    32-bit PCI IO              (Outbound ATU #3)
+ *
+ *   PCI->Local map (from PCI)
+ *   MPC826x slave window                                  controlled by
+ *
+ *   0x00000000 - 0x07FFFFFF    MPC826x local memory       (Inbound ATU #1)
+ */
+
+/*
+ * Slave window that allows PCI masters to access MPC826x local memory.
+ * This window is set up using the first set of Inbound ATU registers
+ */
+
+#ifndef M82xx_PCI_SLAVE_MEM_LOCAL
+#define M82xx_PCI_SLAVE_MEM_LOCAL	(((struct bd_info *)__res)->bi_memstart)
+#define M82xx_PCI_SLAVE_MEM_BUS		(((struct bd_info *)__res)->bi_memstart)
+#define M82xx_PCI_SLAVE_MEM_SIZE	(((struct bd_info *)__res)->bi_memsize)
+#endif
+
+/*
+ * This is the window that allows the CPU to access PCI address space.
+ * It will be setup with the SIU PCIBR0 register. All three PCI master
+ * windows, which allow the CPU to access PCI prefetch, non prefetch,
+ * and IO space (see below), must all fit within this window.
+ */
+
+#ifndef M82xx_PCI_LOWER_MEM
+#define M82xx_PCI_LOWER_MEM		0x80000000
+#define M82xx_PCI_UPPER_MEM		0x9fffffff
+#define M82xx_PCI_MEM_OFFSET		0x00000000
+#define M82xx_PCI_MEM_SIZE		0x20000000
+#endif
+
+#ifndef M82xx_PCI_LOWER_MMIO
+#define M82xx_PCI_LOWER_MMIO		0xa0000000
+#define M82xx_PCI_UPPER_MMIO		0xafffffff
+#define M82xx_PCI_MMIO_OFFSET		0x00000000
+#define M82xx_PCI_MMIO_SIZE		0x20000000
+#endif
+
+#ifndef M82xx_PCI_LOWER_IO
+#define M82xx_PCI_LOWER_IO		0x00000000
+#define M82xx_PCI_UPPER_IO		0x01ffffff
+#define M82xx_PCI_IO_BASE		0xf6000000
+#define M82xx_PCI_IO_SIZE		0x02000000
+#endif
+
+#ifndef M82xx_PCI_PRIM_WND_SIZE
+#define M82xx_PCI_PRIM_WND_SIZE 	~(M82xx_PCI_IO_SIZE - 1U)
+#define M82xx_PCI_PRIM_WND_BASE		(M82xx_PCI_IO_BASE)
+#endif
+
+#ifndef M82xx_PCI_SEC_WND_SIZE
+#define M82xx_PCI_SEC_WND_SIZE 		~(M82xx_PCI_MEM_SIZE + M82xx_PCI_MMIO_SIZE - 1U)
+#define M82xx_PCI_SEC_WND_BASE 		(M82xx_PCI_LOWER_MEM)
+#endif
+
+#ifndef POTA_ADDR_SHIFT
+#define POTA_ADDR_SHIFT		12
+#endif
+
+#ifndef PITA_ADDR_SHIFT
+#define PITA_ADDR_SHIFT		12
+#endif
+
+#ifndef _IO_BASE
+#define _IO_BASE isa_io_base
+#endif
+
+#ifdef CONFIG_8260_PCI9
+struct pci_controller;
+extern void setup_m8260_indirect_pci(struct pci_controller* hose,
+					u32 cfg_addr, u32 cfg_data);
+#else
+#define setup_m8260_indirect_pci setup_indirect_pci
+#endif
+
+#endif /* _PPC_KERNEL_M8260_PCI_H */
diff --git a/arch/ppc/syslib/mpc83xx_devices.c b/arch/ppc/syslib/mpc83xx_devices.c
index 5c1a919e..75c8e98 100644
--- a/arch/ppc/syslib/mpc83xx_devices.c
+++ b/arch/ppc/syslib/mpc83xx_devices.c
@@ -61,6 +61,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.iotype		= UPIO_MEM,
 		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 	},
+	{ },
 };
 
 struct platform_device ppc_sys_platform_devices[] = {
diff --git a/arch/ppc/syslib/mpc85xx_devices.c b/arch/ppc/syslib/mpc85xx_devices.c
index a231795..1e658ef 100644
--- a/arch/ppc/syslib/mpc85xx_devices.c
+++ b/arch/ppc/syslib/mpc85xx_devices.c
@@ -61,6 +61,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.iotype		= UPIO_MEM,
 		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ,
 	},
+	{ },
 };
 
 struct platform_device ppc_sys_platform_devices[] = {
diff --git a/arch/ppc/syslib/open_pic.c b/arch/ppc/syslib/open_pic.c
index 7619e16..000ba47c 100644
--- a/arch/ppc/syslib/open_pic.c
+++ b/arch/ppc/syslib/open_pic.c
@@ -275,7 +275,7 @@ static void __init openpic_enable_sie(void)
 }
 #endif
 
-#if defined(CONFIG_EPIC_SERIAL_MODE) || defined(CONFIG_PM)
+#if defined(CONFIG_EPIC_SERIAL_MODE)
 static void openpic_reset(void)
 {
 	openpic_setfield(&OpenPIC->Global.Global_Configuration0,
@@ -557,12 +557,10 @@ static void __init openpic_initipi(u_int ipi, u_int pri, u_int vec)
  */
 void openpic_cause_IPI(u_int ipi, cpumask_t cpumask)
 {
-	cpumask_t phys;
 	DECL_THIS_CPU;
 
 	CHECK_THIS_CPU;
 	check_arg_ipi(ipi);
-	phys = physmask(cpumask);
 	openpic_write(&OpenPIC->THIS_CPU.IPI_Dispatch(ipi),
 		      cpus_addr(physmask(cpumask))[0]);
 }
@@ -995,8 +993,6 @@ int openpic_resume(struct sys_device *sysdev)
 		return 0;
 	}
 
-	openpic_reset();
-
 	/* OpenPIC sometimes seem to need some time to be fully back up... */
 	do {
 		openpic_set_spurious(OPENPIC_VEC_SPURIOUS);
diff --git a/arch/ppc/syslib/ppc83xx_setup.c b/arch/ppc/syslib/ppc83xx_setup.c
index c28f9d6..843cf88 100644
--- a/arch/ppc/syslib/ppc83xx_setup.c
+++ b/arch/ppc/syslib/ppc83xx_setup.c
@@ -29,6 +29,7 @@
 #include <asm/mmu.h>
 #include <asm/ppc_sys.h>
 #include <asm/kgdb.h>
+#include <asm/delay.h>
 
 #include <syslib/ppc83xx_setup.h>
 
@@ -117,7 +118,34 @@ mpc83xx_early_serial_map(void)
 void
 mpc83xx_restart(char *cmd)
 {
+	volatile unsigned char __iomem *reg;
+	unsigned char tmp;
+
+	reg = ioremap(BCSR_PHYS_ADDR, BCSR_SIZE);
+
 	local_irq_disable();
+
+	/*
+	 * Unlock the BCSR bits so a PRST will update the contents.
+	 * Otherwise the reset asserts but doesn't clear.
+	 */
+	tmp = in_8(reg + BCSR_MISC_REG3_OFF);
+	tmp |= BCSR_MISC_REG3_CNFLOCK; /* low true, high false */
+	out_8(reg + BCSR_MISC_REG3_OFF, tmp);
+
+	/*
+	 * Trigger a reset via a low->high transition of the
+	 * PORESET bit.
+	 */
+	tmp = in_8(reg + BCSR_MISC_REG2_OFF);
+	tmp &= ~BCSR_MISC_REG2_PORESET;
+	out_8(reg + BCSR_MISC_REG2_OFF, tmp);
+
+	udelay(1);
+
+	tmp |= BCSR_MISC_REG2_PORESET;
+	out_8(reg + BCSR_MISC_REG2_OFF, tmp);
+
 	for(;;);
 }
 
diff --git a/arch/ppc/syslib/ppc85xx_setup.c b/arch/ppc/syslib/ppc85xx_setup.c
index 152c3ef..f3277f4 100644
--- a/arch/ppc/syslib/ppc85xx_setup.c
+++ b/arch/ppc/syslib/ppc85xx_setup.c
@@ -132,6 +132,12 @@ mpc85xx_halt(void)
 }
 
 #ifdef CONFIG_PCI
+
+#if defined(CONFIG_MPC8555_CDS)
+extern void mpc85xx_cds_enable_via(struct pci_controller *hose);
+extern void mpc85xx_cds_fixup_via(struct pci_controller *hose);
+#endif
+
 static void __init
 mpc85xx_setup_pci1(struct pci_controller *hose)
 {
@@ -302,8 +308,18 @@ mpc85xx_setup_hose(void)
 
 	ppc_md.pci_exclude_device = mpc85xx_exclude_device;
 
+#if defined(CONFIG_MPC8555_CDS)
+	/* Pre pciauto_bus_scan VIA init */
+	mpc85xx_cds_enable_via(hose_a);
+#endif
+
 	hose_a->last_busno = pciauto_bus_scan(hose_a, hose_a->first_busno);
 
+#if defined(CONFIG_MPC8555_CDS)
+	/* Post pciauto_bus_scan VIA fixup */
+	mpc85xx_cds_fixup_via(hose_a);
+#endif
+
 #ifdef CONFIG_85xx_PCI2
 	hose_b = pcibios_alloc_controller();
 
diff --git a/arch/ppc/syslib/prom_init.c b/arch/ppc/syslib/prom_init.c
index 2cee871..7f15136 100644
--- a/arch/ppc/syslib/prom_init.c
+++ b/arch/ppc/syslib/prom_init.c
@@ -626,8 +626,18 @@ inspect_node(phandle node, struct device_node *dad,
 	l = call_prom("package-to-path", 3, 1, node,
 		      mem_start, mem_end - mem_start);
 	if (l >= 0) {
+		char *p, *ep;
+
 		np->full_name = PTRUNRELOC((char *) mem_start);
 		*(char *)(mem_start + l) = 0;
+		/* Fixup an Apple bug where they have bogus \0 chars in the
+		 * middle of the path in some properties
+		 */
+		for (p = (char *)mem_start, ep = p + l; p < ep; p++)
+			if ((*p) == '\0') {
+				memmove(p, p+1, ep - p);
+				ep--;
+			}
 		mem_start = ALIGNUL(mem_start + l + 1);
 	}
 
diff --git a/arch/ppc64/kernel/mf.c b/arch/ppc64/kernel/mf.c
index 1bd52ec..5aca7e8 100644
--- a/arch/ppc64/kernel/mf.c
+++ b/arch/ppc64/kernel/mf.c
@@ -1,7 +1,7 @@
 /*
   * mf.c
   * Copyright (C) 2001 Troy D. Armstrong  IBM Corporation
-  * Copyright (C) 2004 Stephen Rothwell  IBM Corporation
+  * Copyright (C) 2004-2005 Stephen Rothwell  IBM Corporation
   *
   * This modules exists as an interface between a Linux secondary partition
   * running on an iSeries and the primary partition's Virtual Service
@@ -36,10 +36,12 @@
 
 #include <asm/time.h>
 #include <asm/uaccess.h>
+#include <asm/paca.h>
 #include <asm/iSeries/vio.h>
 #include <asm/iSeries/mf.h>
 #include <asm/iSeries/HvLpConfig.h>
 #include <asm/iSeries/ItSpCommArea.h>
+#include <asm/iSeries/ItLpQueue.h>
 
 /*
  * This is the structure layout for the Machine Facilites LPAR event
@@ -696,36 +698,23 @@ static void get_rtc_time_complete(void *token, struct ce_msg_data *ce_msg)
 	complete(&rtc->com);
 }
 
-int mf_get_rtc(struct rtc_time *tm)
+static int rtc_set_tm(int rc, u8 *ce_msg, struct rtc_time *tm)
 {
-	struct ce_msg_comp_data ce_complete;
-	struct rtc_time_data rtc_data;
-	int rc;
-
-	memset(&ce_complete, 0, sizeof(ce_complete));
-	memset(&rtc_data, 0, sizeof(rtc_data));
-	init_completion(&rtc_data.com);
-	ce_complete.handler = &get_rtc_time_complete;
-	ce_complete.token = &rtc_data;
-	rc = signal_ce_msg_simple(0x40, &ce_complete);
-	if (rc)
-		return rc;
-	wait_for_completion(&rtc_data.com);
 	tm->tm_wday = 0;
 	tm->tm_yday = 0;
 	tm->tm_isdst = 0;
-	if (rtc_data.rc) {
+	if (rc) {
 		tm->tm_sec = 0;
 		tm->tm_min = 0;
 		tm->tm_hour = 0;
 		tm->tm_mday = 15;
 		tm->tm_mon = 5;
 		tm->tm_year = 52;
-		return rtc_data.rc;
+		return rc;
 	}
 
-	if ((rtc_data.ce_msg.ce_msg[2] == 0xa9) ||
-	    (rtc_data.ce_msg.ce_msg[2] == 0xaf)) {
+	if ((ce_msg[2] == 0xa9) ||
+	    (ce_msg[2] == 0xaf)) {
 		/* TOD clock is not set */
 		tm->tm_sec = 1;
 		tm->tm_min = 1;
@@ -736,7 +725,6 @@ int mf_get_rtc(struct rtc_time *tm)
 		mf_set_rtc(tm);
 	}
 	{
-		u8 *ce_msg = rtc_data.ce_msg.ce_msg;
 		u8 year = ce_msg[5];
 		u8 sec = ce_msg[6];
 		u8 min = ce_msg[7];
@@ -765,6 +753,63 @@ int mf_get_rtc(struct rtc_time *tm)
 	return 0;
 }
 
+int mf_get_rtc(struct rtc_time *tm)
+{
+	struct ce_msg_comp_data ce_complete;
+	struct rtc_time_data rtc_data;
+	int rc;
+
+	memset(&ce_complete, 0, sizeof(ce_complete));
+	memset(&rtc_data, 0, sizeof(rtc_data));
+	init_completion(&rtc_data.com);
+	ce_complete.handler = &get_rtc_time_complete;
+	ce_complete.token = &rtc_data;
+	rc = signal_ce_msg_simple(0x40, &ce_complete);
+	if (rc)
+		return rc;
+	wait_for_completion(&rtc_data.com);
+	return rtc_set_tm(rtc_data.rc, rtc_data.ce_msg.ce_msg, tm);
+}
+
+struct boot_rtc_time_data {
+	int busy;
+	struct ce_msg_data ce_msg;
+	int rc;
+};
+
+static void get_boot_rtc_time_complete(void *token, struct ce_msg_data *ce_msg)
+{
+	struct boot_rtc_time_data *rtc = token;
+
+	memcpy(&rtc->ce_msg, ce_msg, sizeof(rtc->ce_msg));
+	rtc->rc = 0;
+	rtc->busy = 0;
+}
+
+int mf_get_boot_rtc(struct rtc_time *tm)
+{
+	struct ce_msg_comp_data ce_complete;
+	struct boot_rtc_time_data rtc_data;
+	int rc;
+
+	memset(&ce_complete, 0, sizeof(ce_complete));
+	memset(&rtc_data, 0, sizeof(rtc_data));
+	rtc_data.busy = 1;
+	ce_complete.handler = &get_boot_rtc_time_complete;
+	ce_complete.token = &rtc_data;
+	rc = signal_ce_msg_simple(0x40, &ce_complete);
+	if (rc)
+		return rc;
+	/* We need to poll here as we are not yet taking interrupts */
+	while (rtc_data.busy) {
+		extern unsigned long lpevent_count;
+		struct ItLpQueue *lpq = get_paca()->lpqueue_ptr;
+		if (lpq && ItLpQueue_isLpIntPending(lpq))
+			lpevent_count += ItLpQueue_process(lpq, NULL);
+	}
+	return rtc_set_tm(rtc_data.rc, rtc_data.ce_msg.ce_msg, tm);
+}
+
 int mf_set_rtc(struct rtc_time *tm)
 {
 	char ce_time[12];
diff --git a/arch/ppc64/kernel/pSeries_reconfig.c b/arch/ppc64/kernel/pSeries_reconfig.c
index cb5443f..dc2a69d 100644
--- a/arch/ppc64/kernel/pSeries_reconfig.c
+++ b/arch/ppc64/kernel/pSeries_reconfig.c
@@ -47,14 +47,6 @@ static void remove_node_proc_entries(struct device_node *np)
 		remove_proc_entry(pp->name, np->pde);
 		pp = pp->next;
 	}
-
-	/* Assuming that symlinks have the same parent directory as
-	 * np->pde.
-	 */
-	if (np->name_link)
-		remove_proc_entry(np->name_link->name, parent->pde);
-	if (np->addr_link)
-		remove_proc_entry(np->addr_link->name, parent->pde);
 	if (np->pde)
 		remove_proc_entry(np->pde->name, parent->pde);
 }
diff --git a/arch/ppc64/kernel/pmac_smp.c b/arch/ppc64/kernel/pmac_smp.c
index c27588e..a23de37 100644
--- a/arch/ppc64/kernel/pmac_smp.c
+++ b/arch/ppc64/kernel/pmac_smp.c
@@ -68,6 +68,7 @@ extern struct smp_ops_t *smp_ops;
 
 static void (*pmac_tb_freeze)(int freeze);
 static struct device_node *pmac_tb_clock_chip_host;
+static u8 pmac_tb_pulsar_addr;
 static DEFINE_SPINLOCK(timebase_lock);
 static unsigned long timebase;
 
@@ -106,12 +107,9 @@ static void smp_core99_pulsar_tb_freeze(int freeze)
 	u8 data;
 	int rc;
 
-	/* Strangely, the device-tree says address is 0xd2, but darwin
-	 * accesses 0xd0 ...
-	 */
 	pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_combined);
 	rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host,
-			       0xd4 | pmac_low_i2c_read,
+			       pmac_tb_pulsar_addr | pmac_low_i2c_read,
 			       0x2e, &data, 1);
 	if (rc != 0)
 		goto bail;
@@ -120,7 +118,7 @@ static void smp_core99_pulsar_tb_freeze(int freeze)
 
 	pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_stdsub);
 	rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host,
-			       0xd4 | pmac_low_i2c_write,
+			       pmac_tb_pulsar_addr | pmac_low_i2c_write,
 			       0x2e, &data, 1);
  bail:
 	if (rc != 0) {
@@ -185,6 +183,12 @@ static int __init smp_core99_probe(void)
 	if (ncpus <= 1)
 		return 1;
 
+	/* HW sync only on these platforms */
+	if (!machine_is_compatible("PowerMac7,2") &&
+	    !machine_is_compatible("PowerMac7,3") &&
+	    !machine_is_compatible("RackMac3,1"))
+		goto nohwsync;
+
 	/* Look for the clock chip */
 	for (cc = NULL; (cc = of_find_node_by_name(cc, "i2c-hwclock")) != NULL;) {
 		struct device_node *p = of_get_parent(cc);
@@ -198,11 +202,18 @@ static int __init smp_core99_probe(void)
 			goto next;
 		switch (*reg) {
 		case 0xd2:
-			pmac_tb_freeze = smp_core99_cypress_tb_freeze;
-			printk(KERN_INFO "Timebase clock is Cypress chip\n");
+			if (device_is_compatible(cc, "pulsar-legacy-slewing")) {
+				pmac_tb_freeze = smp_core99_pulsar_tb_freeze;
+				pmac_tb_pulsar_addr = 0xd2;
+				printk(KERN_INFO "Timebase clock is Pulsar chip\n");
+			} else if (device_is_compatible(cc, "cy28508")) {
+				pmac_tb_freeze = smp_core99_cypress_tb_freeze;
+				printk(KERN_INFO "Timebase clock is Cypress chip\n");
+			}
 			break;
 		case 0xd4:
 			pmac_tb_freeze = smp_core99_pulsar_tb_freeze;
+			pmac_tb_pulsar_addr = 0xd4;
 			printk(KERN_INFO "Timebase clock is Pulsar chip\n");
 			break;
 		}
@@ -210,12 +221,15 @@ static int __init smp_core99_probe(void)
 			pmac_tb_clock_chip_host = p;
 			smp_ops->give_timebase = smp_core99_give_timebase;
 			smp_ops->take_timebase = smp_core99_take_timebase;
+			of_node_put(cc);
+			of_node_put(p);
 			break;
 		}
 	next:
 		of_node_put(p);
 	}
 
+ nohwsync:
 	mpic_request_ipis();
 
 	return ncpus;
diff --git a/arch/ppc64/kernel/prom_init.c b/arch/ppc64/kernel/prom_init.c
index 35ec42d..3de950d 100644
--- a/arch/ppc64/kernel/prom_init.c
+++ b/arch/ppc64/kernel/prom_init.c
@@ -1566,7 +1566,7 @@ static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start,
 {
 	int l, align;
 	phandle child;
-	char *namep, *prev_name, *sstart;
+	char *namep, *prev_name, *sstart, *p, *ep;
 	unsigned long soff;
 	unsigned char *valp;
 	unsigned long offset = reloc_offset();
@@ -1588,6 +1588,14 @@ static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start,
 			call_prom("package-to-path", 3, 1, node, namep, l);
 		}
 		namep[l] = '\0';
+		/* Fixup an Apple bug where they have bogus \0 chars in the
+		 * middle of the path in some properties
+		 */
+		for (p = namep, ep = namep + l; p < ep; p++)
+			if (*p == '\0') {
+				memmove(p, p+1, ep - p);
+				ep--; l--;
+			}
 		*mem_start = _ALIGN(((unsigned long) namep) + strlen(namep) + 1, 4);
 	}
 
@@ -1750,7 +1758,44 @@ static void __init flatten_device_tree(void)
 	prom_printf("Device tree struct  0x%x -> 0x%x\n",
 		    RELOC(dt_struct_start), RELOC(dt_struct_end));
 
- }
+}
+
+
+static void __init fixup_device_tree(void)
+{
+	unsigned long offset = reloc_offset();
+	phandle u3, i2c, mpic;
+	u32 u3_rev;
+	u32 interrupts[2];
+	u32 parent;
+
+	/* Some G5s have a missing interrupt definition, fix it up here */
+	u3 = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000"));
+	if ((long)u3 <= 0)
+		return;
+	i2c = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000/i2c@f8001000"));
+	if ((long)i2c <= 0)
+		return;
+	mpic = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000/mpic@f8040000"));
+	if ((long)mpic <= 0)
+		return;
+
+	/* check if proper rev of u3 */
+	if (prom_getprop(u3, "device-rev", &u3_rev, sizeof(u3_rev)) <= 0)
+		return;
+	if (u3_rev != 0x35)
+		return;
+	/* does it need fixup ? */
+	if (prom_getproplen(i2c, "interrupts") > 0)
+		return;
+	/* interrupt on this revision of u3 is number 0 and level */
+	interrupts[0] = 0;
+	interrupts[1] = 1;
+	prom_setprop(i2c, "interrupts", &interrupts, sizeof(interrupts));
+	parent = (u32)mpic;
+	prom_setprop(i2c, "interrupt-parent", &parent, sizeof(parent));
+}
+
 
 static void __init prom_find_boot_cpu(void)
 {
@@ -1844,6 +1889,12 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, unsigned long
 		     &getprop_rval, sizeof(getprop_rval));
 
 	/*
+	 * On pSeries, inform the firmware about our capabilities
+	 */
+	if (RELOC(of_platform) & PLATFORM_PSERIES)
+		prom_send_capabilities();
+
+	/*
 	 * On pSeries, copy the CPU hold code
 	 */
        	if (RELOC(of_platform) & PLATFORM_PSERIES)
@@ -1920,6 +1971,11 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, unsigned long
 	}
 
 	/*
+	 * Fixup any known bugs in the device-tree
+	 */
+	fixup_device_tree();
+
+	/*
 	 * Now finally create the flattened device-tree
 	 */
        	prom_printf("copying OF device tree ...\n");
diff --git a/arch/ppc64/kernel/rtc.c b/arch/ppc64/kernel/rtc.c
index 3e70b91..6798905 100644
--- a/arch/ppc64/kernel/rtc.c
+++ b/arch/ppc64/kernel/rtc.c
@@ -292,47 +292,10 @@ int iSeries_set_rtc_time(struct rtc_time *tm)
 
 void iSeries_get_boot_time(struct rtc_time *tm)
 {
-	unsigned long time;
-	static unsigned long lastsec = 1;
-
-	u32 dataWord1 = *((u32 *)(&xSpCommArea.xBcdTimeAtIplStart));
-	u32 dataWord2 = *(((u32 *)&(xSpCommArea.xBcdTimeAtIplStart)) + 1);
-	int year = 1970;
-	int year1 = ( dataWord1 >> 24 ) & 0x000000FF;
-	int year2 = ( dataWord1 >> 16 ) & 0x000000FF;
-	int sec = ( dataWord1 >> 8 ) & 0x000000FF;
-	int min = dataWord1 & 0x000000FF;
-	int hour = ( dataWord2 >> 24 ) & 0x000000FF;
-	int day = ( dataWord2 >> 8 ) & 0x000000FF;
-	int mon = dataWord2 & 0x000000FF;
-
 	if ( piranha_simulator )
 		return;
 
-	BCD_TO_BIN(sec);
-	BCD_TO_BIN(min);
-	BCD_TO_BIN(hour);
-	BCD_TO_BIN(day);
-	BCD_TO_BIN(mon);
-	BCD_TO_BIN(year1);
-	BCD_TO_BIN(year2);
-	year = year1 * 100 + year2;
-
-	time = mktime(year, mon, day, hour, min, sec);
-	time += ( jiffies / HZ );
-
-	/* Now THIS is a nasty hack!
-	* It ensures that the first two calls get different answers.  
-	* That way the loop in init_time (time.c) will not think
-	* the clock is stuck.
-	*/
-	if ( lastsec ) {
-		time -= lastsec;
-		--lastsec;
-	}
-
-	to_tm(time, tm); 
-	tm->tm_year -= 1900;
+	mf_get_boot_rtc(tm);
 	tm->tm_mon  -= 1;
 }
 #endif
diff --git a/arch/ppc64/kernel/time.c b/arch/ppc64/kernel/time.c
index 772a465..33364a7 100644
--- a/arch/ppc64/kernel/time.c
+++ b/arch/ppc64/kernel/time.c
@@ -325,9 +325,7 @@ int timer_interrupt(struct pt_regs * regs)
 
 	irq_enter();
 
-#ifndef CONFIG_PPC_ISERIES
 	profile_tick(CPU_PROFILING, regs);
-#endif
 
 	lpaca->lppaca.int_dword.fields.decr_int = 0;
 
@@ -515,6 +513,7 @@ void __init time_init(void)
 	do_gtod.varp = &do_gtod.vars[0];
 	do_gtod.var_idx = 0;
 	do_gtod.varp->tb_orig_stamp = tb_last_stamp;
+	get_paca()->next_jiffy_update_tb = tb_last_stamp + tb_ticks_per_jiffy;
 	do_gtod.varp->stamp_xsec = xtime.tv_sec * XSEC_PER_SEC;
 	do_gtod.tb_ticks_per_sec = tb_ticks_per_sec;
 	do_gtod.varp->tb_to_xs = tb_to_xs;
diff --git a/arch/sparc64/kernel/pci_iommu.c b/arch/sparc64/kernel/pci_iommu.c
index 2929834..2803bc7 100644
--- a/arch/sparc64/kernel/pci_iommu.c
+++ b/arch/sparc64/kernel/pci_iommu.c
@@ -8,6 +8,7 @@
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/mm.h>
+#include <linux/delay.h>
 
 #include <asm/pbm.h>
 
@@ -195,6 +196,34 @@ static iopte_t *alloc_consistent_cluster(struct pci_iommu *iommu, unsigned long
 	return NULL;
 }
 
+static int iommu_alloc_ctx(struct pci_iommu *iommu)
+{
+	int lowest = iommu->ctx_lowest_free;
+	int sz = IOMMU_NUM_CTXS - lowest;
+	int n = find_next_zero_bit(iommu->ctx_bitmap, sz, lowest);
+
+	if (unlikely(n == sz)) {
+		n = find_next_zero_bit(iommu->ctx_bitmap, lowest, 1);
+		if (unlikely(n == lowest)) {
+			printk(KERN_WARNING "IOMMU: Ran out of contexts.\n");
+			n = 0;
+		}
+	}
+	if (n)
+		__set_bit(n, iommu->ctx_bitmap);
+
+	return n;
+}
+
+static inline void iommu_free_ctx(struct pci_iommu *iommu, int ctx)
+{
+	if (likely(ctx)) {
+		__clear_bit(ctx, iommu->ctx_bitmap);
+		if (ctx < iommu->ctx_lowest_free)
+			iommu->ctx_lowest_free = ctx;
+	}
+}
+
 /* Allocate and map kernel buffer of size SIZE using consistent mode
  * DMA for PCI device PDEV.  Return non-NULL cpu-side address if
  * successful and set *DMA_ADDRP to the PCI side dma address.
@@ -235,7 +264,7 @@ void *pci_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_ad
 	npages = size >> IO_PAGE_SHIFT;
 	ctx = 0;
 	if (iommu->iommu_ctxflush)
-		ctx = iommu->iommu_cur_ctx++;
+		ctx = iommu_alloc_ctx(iommu);
 	first_page = __pa(first_page);
 	while (npages--) {
 		iopte_val(*iopte) = (IOPTE_CONSISTENT(ctx) |
@@ -316,6 +345,8 @@ void pci_free_consistent(struct pci_dev *pdev, size_t size, void *cpu, dma_addr_
 		}
 	}
 
+	iommu_free_ctx(iommu, ctx);
+
 	spin_unlock_irqrestore(&iommu->lock, flags);
 
 	order = get_order(size);
@@ -359,7 +390,7 @@ dma_addr_t pci_map_single(struct pci_dev *pdev, void *ptr, size_t sz, int direct
 	base_paddr = __pa(oaddr & IO_PAGE_MASK);
 	ctx = 0;
 	if (iommu->iommu_ctxflush)
-		ctx = iommu->iommu_cur_ctx++;
+		ctx = iommu_alloc_ctx(iommu);
 	if (strbuf->strbuf_enabled)
 		iopte_protection = IOPTE_STREAMING(ctx);
 	else
@@ -379,6 +410,70 @@ bad:
 	return PCI_DMA_ERROR_CODE;
 }
 
+static void pci_strbuf_flush(struct pci_strbuf *strbuf, struct pci_iommu *iommu, u32 vaddr, unsigned long ctx, unsigned long npages, int direction)
+{
+	int limit;
+
+	if (strbuf->strbuf_ctxflush &&
+	    iommu->iommu_ctxflush) {
+		unsigned long matchreg, flushreg;
+		u64 val;
+
+		flushreg = strbuf->strbuf_ctxflush;
+		matchreg = PCI_STC_CTXMATCH_ADDR(strbuf, ctx);
+
+		pci_iommu_write(flushreg, ctx);
+		val = pci_iommu_read(matchreg);
+		val &= 0xffff;
+		if (!val)
+			goto do_flush_sync;
+
+		while (val) {
+			if (val & 0x1)
+				pci_iommu_write(flushreg, ctx);
+			val >>= 1;
+		}
+		val = pci_iommu_read(matchreg);
+		if (unlikely(val)) {
+			printk(KERN_WARNING "pci_strbuf_flush: ctx flush "
+			       "timeout matchreg[%lx] ctx[%lx]\n",
+			       val, ctx);
+			goto do_page_flush;
+		}
+	} else {
+		unsigned long i;
+
+	do_page_flush:
+		for (i = 0; i < npages; i++, vaddr += IO_PAGE_SIZE)
+			pci_iommu_write(strbuf->strbuf_pflush, vaddr);
+	}
+
+do_flush_sync:
+	/* If the device could not have possibly put dirty data into
+	 * the streaming cache, no flush-flag synchronization needs
+	 * to be performed.
+	 */
+	if (direction == PCI_DMA_TODEVICE)
+		return;
+
+	PCI_STC_FLUSHFLAG_INIT(strbuf);
+	pci_iommu_write(strbuf->strbuf_fsync, strbuf->strbuf_flushflag_pa);
+	(void) pci_iommu_read(iommu->write_complete_reg);
+
+	limit = 100000;
+	while (!PCI_STC_FLUSHFLAG_SET(strbuf)) {
+		limit--;
+		if (!limit)
+			break;
+		udelay(1);
+		membar("#LoadLoad");
+	}
+	if (!limit)
+		printk(KERN_WARNING "pci_strbuf_flush: flushflag timeout "
+		       "vaddr[%08x] ctx[%lx] npages[%ld]\n",
+		       vaddr, ctx, npages);
+}
+
 /* Unmap a single streaming mode DMA translation. */
 void pci_unmap_single(struct pci_dev *pdev, dma_addr_t bus_addr, size_t sz, int direction)
 {
@@ -386,7 +481,7 @@ void pci_unmap_single(struct pci_dev *pdev, dma_addr_t bus_addr, size_t sz, int
 	struct pci_iommu *iommu;
 	struct pci_strbuf *strbuf;
 	iopte_t *base;
-	unsigned long flags, npages, i, ctx;
+	unsigned long flags, npages, ctx;
 
 	if (direction == PCI_DMA_NONE)
 		BUG();
@@ -414,29 +509,8 @@ void pci_unmap_single(struct pci_dev *pdev, dma_addr_t bus_addr, size_t sz, int
 		ctx = (iopte_val(*base) & IOPTE_CONTEXT) >> 47UL;
 
 	/* Step 1: Kick data out of streaming buffers if necessary. */
-	if (strbuf->strbuf_enabled) {
-		u32 vaddr = bus_addr;
-
-		PCI_STC_FLUSHFLAG_INIT(strbuf);
-		if (strbuf->strbuf_ctxflush &&
-		    iommu->iommu_ctxflush) {
-			unsigned long matchreg, flushreg;
-
-			flushreg = strbuf->strbuf_ctxflush;
-			matchreg = PCI_STC_CTXMATCH_ADDR(strbuf, ctx);
-			do {
-				pci_iommu_write(flushreg, ctx);
-			} while(((long)pci_iommu_read(matchreg)) < 0L);
-		} else {
-			for (i = 0; i < npages; i++, vaddr += IO_PAGE_SIZE)
-				pci_iommu_write(strbuf->strbuf_pflush, vaddr);
-		}
-
-		pci_iommu_write(strbuf->strbuf_fsync, strbuf->strbuf_flushflag_pa);
-		(void) pci_iommu_read(iommu->write_complete_reg);
-		while (!PCI_STC_FLUSHFLAG_SET(strbuf))
-			membar("#LoadLoad");
-	}
+	if (strbuf->strbuf_enabled)
+		pci_strbuf_flush(strbuf, iommu, bus_addr, ctx, npages, direction);
 
 	/* Step 2: Clear out first TSB entry. */
 	iopte_make_dummy(iommu, base);
@@ -444,6 +518,8 @@ void pci_unmap_single(struct pci_dev *pdev, dma_addr_t bus_addr, size_t sz, int
 	free_streaming_cluster(iommu, bus_addr - iommu->page_table_map_base,
 			       npages, ctx);
 
+	iommu_free_ctx(iommu, ctx);
+
 	spin_unlock_irqrestore(&iommu->lock, flags);
 }
 
@@ -583,7 +659,7 @@ int pci_map_sg(struct pci_dev *pdev, struct scatterlist *sglist, int nelems, int
 	/* Step 4: Choose a context if necessary. */
 	ctx = 0;
 	if (iommu->iommu_ctxflush)
-		ctx = iommu->iommu_cur_ctx++;
+		ctx = iommu_alloc_ctx(iommu);
 
 	/* Step 5: Create the mappings. */
 	if (strbuf->strbuf_enabled)
@@ -647,29 +723,8 @@ void pci_unmap_sg(struct pci_dev *pdev, struct scatterlist *sglist, int nelems,
 		ctx = (iopte_val(*base) & IOPTE_CONTEXT) >> 47UL;
 
 	/* Step 1: Kick data out of streaming buffers if necessary. */
-	if (strbuf->strbuf_enabled) {
-		u32 vaddr = (u32) bus_addr;
-
-		PCI_STC_FLUSHFLAG_INIT(strbuf);
-		if (strbuf->strbuf_ctxflush &&
-		    iommu->iommu_ctxflush) {
-			unsigned long matchreg, flushreg;
-
-			flushreg = strbuf->strbuf_ctxflush;
-			matchreg = PCI_STC_CTXMATCH_ADDR(strbuf, ctx);
-			do {
-				pci_iommu_write(flushreg, ctx);
-			} while(((long)pci_iommu_read(matchreg)) < 0L);
-		} else {
-			for (i = 0; i < npages; i++, vaddr += IO_PAGE_SIZE)
-				pci_iommu_write(strbuf->strbuf_pflush, vaddr);
-		}
-
-		pci_iommu_write(strbuf->strbuf_fsync, strbuf->strbuf_flushflag_pa);
-		(void) pci_iommu_read(iommu->write_complete_reg);
-		while (!PCI_STC_FLUSHFLAG_SET(strbuf))
-			membar("#LoadLoad");
-	}
+	if (strbuf->strbuf_enabled)
+		pci_strbuf_flush(strbuf, iommu, bus_addr, ctx, npages, direction);
 
 	/* Step 2: Clear out first TSB entry. */
 	iopte_make_dummy(iommu, base);
@@ -677,6 +732,8 @@ void pci_unmap_sg(struct pci_dev *pdev, struct scatterlist *sglist, int nelems,
 	free_streaming_cluster(iommu, bus_addr - iommu->page_table_map_base,
 			       npages, ctx);
 
+	iommu_free_ctx(iommu, ctx);
+
 	spin_unlock_irqrestore(&iommu->lock, flags);
 }
 
@@ -715,28 +772,7 @@ void pci_dma_sync_single_for_cpu(struct pci_dev *pdev, dma_addr_t bus_addr, size
 	}
 
 	/* Step 2: Kick data out of streaming buffers. */
-	PCI_STC_FLUSHFLAG_INIT(strbuf);
-	if (iommu->iommu_ctxflush &&
-	    strbuf->strbuf_ctxflush) {
-		unsigned long matchreg, flushreg;
-
-		flushreg = strbuf->strbuf_ctxflush;
-		matchreg = PCI_STC_CTXMATCH_ADDR(strbuf, ctx);
-		do {
-			pci_iommu_write(flushreg, ctx);
-		} while(((long)pci_iommu_read(matchreg)) < 0L);
-	} else {
-		unsigned long i;
-
-		for (i = 0; i < npages; i++, bus_addr += IO_PAGE_SIZE)
-			pci_iommu_write(strbuf->strbuf_pflush, bus_addr);
-	}
-
-	/* Step 3: Perform flush synchronization sequence. */
-	pci_iommu_write(strbuf->strbuf_fsync, strbuf->strbuf_flushflag_pa);
-	(void) pci_iommu_read(iommu->write_complete_reg);
-	while (!PCI_STC_FLUSHFLAG_SET(strbuf))
-		membar("#LoadLoad");
+	pci_strbuf_flush(strbuf, iommu, bus_addr, ctx, npages, direction);
 
 	spin_unlock_irqrestore(&iommu->lock, flags);
 }
@@ -749,7 +785,8 @@ void pci_dma_sync_sg_for_cpu(struct pci_dev *pdev, struct scatterlist *sglist, i
 	struct pcidev_cookie *pcp;
 	struct pci_iommu *iommu;
 	struct pci_strbuf *strbuf;
-	unsigned long flags, ctx;
+	unsigned long flags, ctx, npages, i;
+	u32 bus_addr;
 
 	pcp = pdev->sysdata;
 	iommu = pcp->pbm->iommu;
@@ -772,36 +809,14 @@ void pci_dma_sync_sg_for_cpu(struct pci_dev *pdev, struct scatterlist *sglist, i
 	}
 
 	/* Step 2: Kick data out of streaming buffers. */
-	PCI_STC_FLUSHFLAG_INIT(strbuf);
-	if (iommu->iommu_ctxflush &&
-	    strbuf->strbuf_ctxflush) {
-		unsigned long matchreg, flushreg;
-
-		flushreg = strbuf->strbuf_ctxflush;
-		matchreg = PCI_STC_CTXMATCH_ADDR(strbuf, ctx);
-		do {
-			pci_iommu_write(flushreg, ctx);
-		} while (((long)pci_iommu_read(matchreg)) < 0L);
-	} else {
-		unsigned long i, npages;
-		u32 bus_addr;
-
-		bus_addr = sglist[0].dma_address & IO_PAGE_MASK;
-
-		for(i = 1; i < nelems; i++)
-			if (!sglist[i].dma_length)
-				break;
-		i--;
-		npages = (IO_PAGE_ALIGN(sglist[i].dma_address + sglist[i].dma_length) - bus_addr) >> IO_PAGE_SHIFT;
-		for (i = 0; i < npages; i++, bus_addr += IO_PAGE_SIZE)
-			pci_iommu_write(strbuf->strbuf_pflush, bus_addr);
-	}
-
-	/* Step 3: Perform flush synchronization sequence. */
-	pci_iommu_write(strbuf->strbuf_fsync, strbuf->strbuf_flushflag_pa);
-	(void) pci_iommu_read(iommu->write_complete_reg);
-	while (!PCI_STC_FLUSHFLAG_SET(strbuf))
-		membar("#LoadLoad");
+	bus_addr = sglist[0].dma_address & IO_PAGE_MASK;
+	for(i = 1; i < nelems; i++)
+		if (!sglist[i].dma_length)
+			break;
+	i--;
+	npages = (IO_PAGE_ALIGN(sglist[i].dma_address + sglist[i].dma_length)
+		  - bus_addr) >> IO_PAGE_SHIFT;
+	pci_strbuf_flush(strbuf, iommu, bus_addr, ctx, npages, direction);
 
 	spin_unlock_irqrestore(&iommu->lock, flags);
 }
diff --git a/arch/sparc64/kernel/pci_psycho.c b/arch/sparc64/kernel/pci_psycho.c
index 3567fa8..534320e 100644
--- a/arch/sparc64/kernel/pci_psycho.c
+++ b/arch/sparc64/kernel/pci_psycho.c
@@ -1212,7 +1212,7 @@ static void __init psycho_iommu_init(struct pci_controller_info *p)
 
 	/* Setup initial software IOMMU state. */
 	spin_lock_init(&iommu->lock);
-	iommu->iommu_cur_ctx = 0;
+	iommu->ctx_lowest_free = 1;
 
 	/* Register addresses. */
 	iommu->iommu_control  = p->pbm_A.controller_regs + PSYCHO_IOMMU_CONTROL;
diff --git a/arch/sparc64/kernel/pci_sabre.c b/arch/sparc64/kernel/pci_sabre.c
index 5525d1e..53d333b 100644
--- a/arch/sparc64/kernel/pci_sabre.c
+++ b/arch/sparc64/kernel/pci_sabre.c
@@ -1265,7 +1265,7 @@ static void __init sabre_iommu_init(struct pci_controller_info *p,
 
 	/* Setup initial software IOMMU state. */
 	spin_lock_init(&iommu->lock);
-	iommu->iommu_cur_ctx = 0;
+	iommu->ctx_lowest_free = 1;
 
 	/* Register addresses. */
 	iommu->iommu_control  = p->pbm_A.controller_regs + SABRE_IOMMU_CONTROL;
diff --git a/arch/sparc64/kernel/pci_schizo.c b/arch/sparc64/kernel/pci_schizo.c
index e93fcad..5753175 100644
--- a/arch/sparc64/kernel/pci_schizo.c
+++ b/arch/sparc64/kernel/pci_schizo.c
@@ -1753,7 +1753,7 @@ static void schizo_pbm_iommu_init(struct pci_pbm_info *pbm)
 
 	/* Setup initial software IOMMU state. */
 	spin_lock_init(&iommu->lock);
-	iommu->iommu_cur_ctx = 0;
+	iommu->ctx_lowest_free = 1;
 
 	/* Register addresses, SCHIZO has iommu ctx flushing. */
 	iommu->iommu_control  = pbm->pbm_regs + SCHIZO_IOMMU_CONTROL;
diff --git a/arch/sparc64/kernel/sbus.c b/arch/sparc64/kernel/sbus.c
index 14d9c3a..89f5e01 100644
--- a/arch/sparc64/kernel/sbus.c
+++ b/arch/sparc64/kernel/sbus.c
@@ -117,19 +117,42 @@ static void iommu_flush(struct sbus_iommu *iommu, u32 base, unsigned long npages
 
 #define STRBUF_TAG_VALID	0x02UL
 
-static void strbuf_flush(struct sbus_iommu *iommu, u32 base, unsigned long npages)
+static void sbus_strbuf_flush(struct sbus_iommu *iommu, u32 base, unsigned long npages, int direction)
 {
-	iommu->strbuf_flushflag = 0UL;
-	while (npages--)
-		upa_writeq(base + (npages << IO_PAGE_SHIFT),
+	unsigned long n;
+	int limit;
+
+	n = npages;
+	while (n--)
+		upa_writeq(base + (n << IO_PAGE_SHIFT),
 			   iommu->strbuf_regs + STRBUF_PFLUSH);
 
+	/* If the device could not have possibly put dirty data into
+	 * the streaming cache, no flush-flag synchronization needs
+	 * to be performed.
+	 */
+	if (direction == SBUS_DMA_TODEVICE)
+		return;
+
+	iommu->strbuf_flushflag = 0UL;
+
 	/* Whoopee cushion! */
 	upa_writeq(__pa(&iommu->strbuf_flushflag),
 		   iommu->strbuf_regs + STRBUF_FSYNC);
 	upa_readq(iommu->sbus_control_reg);
-	while (iommu->strbuf_flushflag == 0UL)
+
+	limit = 100000;
+	while (iommu->strbuf_flushflag == 0UL) {
+		limit--;
+		if (!limit)
+			break;
+		udelay(1);
 		membar("#LoadLoad");
+	}
+	if (!limit)
+		printk(KERN_WARNING "sbus_strbuf_flush: flushflag timeout "
+		       "vaddr[%08x] npages[%ld]\n",
+		       base, npages);
 }
 
 static iopte_t *alloc_streaming_cluster(struct sbus_iommu *iommu, unsigned long npages)
@@ -406,7 +429,7 @@ void sbus_unmap_single(struct sbus_dev *sdev, dma_addr_t dma_addr, size_t size,
 
 	spin_lock_irqsave(&iommu->lock, flags);
 	free_streaming_cluster(iommu, dma_base, size >> IO_PAGE_SHIFT);
-	strbuf_flush(iommu, dma_base, size >> IO_PAGE_SHIFT);
+	sbus_strbuf_flush(iommu, dma_base, size >> IO_PAGE_SHIFT, direction);
 	spin_unlock_irqrestore(&iommu->lock, flags);
 }
 
@@ -569,7 +592,7 @@ void sbus_unmap_sg(struct sbus_dev *sdev, struct scatterlist *sg, int nents, int
 	iommu = sdev->bus->iommu;
 	spin_lock_irqsave(&iommu->lock, flags);
 	free_streaming_cluster(iommu, dvma_base, size >> IO_PAGE_SHIFT);
-	strbuf_flush(iommu, dvma_base, size >> IO_PAGE_SHIFT);
+	sbus_strbuf_flush(iommu, dvma_base, size >> IO_PAGE_SHIFT, direction);
 	spin_unlock_irqrestore(&iommu->lock, flags);
 }
 
@@ -581,7 +604,7 @@ void sbus_dma_sync_single_for_cpu(struct sbus_dev *sdev, dma_addr_t base, size_t
 	size = (IO_PAGE_ALIGN(base + size) - (base & IO_PAGE_MASK));
 
 	spin_lock_irqsave(&iommu->lock, flags);
-	strbuf_flush(iommu, base & IO_PAGE_MASK, size >> IO_PAGE_SHIFT);
+	sbus_strbuf_flush(iommu, base & IO_PAGE_MASK, size >> IO_PAGE_SHIFT, direction);
 	spin_unlock_irqrestore(&iommu->lock, flags);
 }
 
@@ -605,7 +628,7 @@ void sbus_dma_sync_sg_for_cpu(struct sbus_dev *sdev, struct scatterlist *sg, int
 	size = IO_PAGE_ALIGN(sg[i].dma_address + sg[i].dma_length) - base;
 
 	spin_lock_irqsave(&iommu->lock, flags);
-	strbuf_flush(iommu, base, size >> IO_PAGE_SHIFT);
+	sbus_strbuf_flush(iommu, base, size >> IO_PAGE_SHIFT, direction);
 	spin_unlock_irqrestore(&iommu->lock, flags);
 }
 
diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c
index 12c3d84b..b7e6a91 100644
--- a/arch/sparc64/kernel/setup.c
+++ b/arch/sparc64/kernel/setup.c
@@ -383,6 +383,17 @@ static void __init process_switch(char c)
 		/* Use PROM debug console. */
 		register_console(&prom_debug_console);
 		break;
+	case 'P':
+		/* Force UltraSPARC-III P-Cache on. */
+		if (tlb_type != cheetah) {
+			printk("BOOT: Ignoring P-Cache force option.\n");
+			break;
+		}
+		cheetah_pcache_forced_on = 1;
+		add_taint(TAINT_MACHINE_CHECK);
+		cheetah_enable_pcache();
+		break;
+
 	default:
 		printk("Unknown boot switch (-%c)\n", c);
 		break;
diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c
index 6dff06a..e5b9c7a 100644
--- a/arch/sparc64/kernel/smp.c
+++ b/arch/sparc64/kernel/smp.c
@@ -123,6 +123,9 @@ void __init smp_callin(void)
 
 	smp_setup_percpu_timer();
 
+	if (cheetah_pcache_forced_on)
+		cheetah_enable_pcache();
+
 	local_irq_enable();
 
 	calibrate_delay();
diff --git a/arch/sparc64/kernel/traps.c b/arch/sparc64/kernel/traps.c
index 56b203a..a9f4596 100644
--- a/arch/sparc64/kernel/traps.c
+++ b/arch/sparc64/kernel/traps.c
@@ -421,6 +421,25 @@ asmlinkage void cee_log(unsigned long ce_status,
 	}
 }
 
+int cheetah_pcache_forced_on;
+
+void cheetah_enable_pcache(void)
+{
+	unsigned long dcr;
+
+	printk("CHEETAH: Enabling P-Cache on cpu %d.\n",
+	       smp_processor_id());
+
+	__asm__ __volatile__("ldxa [%%g0] %1, %0"
+			     : "=r" (dcr)
+			     : "i" (ASI_DCU_CONTROL_REG));
+	dcr |= (DCU_PE | DCU_HPE | DCU_SPE | DCU_SL);
+	__asm__ __volatile__("stxa %0, [%%g0] %1\n\t"
+			     "membar #Sync"
+			     : /* no outputs */
+			     : "r" (dcr), "i" (ASI_DCU_CONTROL_REG));
+}
+
 /* Cheetah error trap handling. */
 static unsigned long ecache_flush_physbase;
 static unsigned long ecache_flush_linesize;
diff --git a/arch/um/Kconfig.debug b/arch/um/Kconfig.debug
index b89989d..bd41e42 100644
--- a/arch/um/Kconfig.debug
+++ b/arch/um/Kconfig.debug
@@ -2,10 +2,6 @@ menu "Kernel hacking"
 
 source "lib/Kconfig.debug"
 
-config FRAME_POINTER
-	bool
-	default y if DEBUG_INFO
-
 config PT_PROXY
 	bool "Enable ptrace proxy"
 	depends on XTERM_CHAN && DEBUG_INFO && MODE_TT
diff --git a/arch/um/Kconfig_x86_64 b/arch/um/Kconfig_x86_64
index fd8d7e8..f162f50 100644
--- a/arch/um/Kconfig_x86_64
+++ b/arch/um/Kconfig_x86_64
@@ -6,6 +6,10 @@ config 64BIT
 	bool
 	default y
 
+config TOP_ADDR
+ 	hex
+	default 0x80000000
+
 config 3_LEVEL_PGTABLES
        bool
        default y
diff --git a/arch/um/drivers/chan_kern.c b/arch/um/drivers/chan_kern.c
index 0150038..14a12d6 100644
--- a/arch/um/drivers/chan_kern.c
+++ b/arch/um/drivers/chan_kern.c
@@ -20,9 +20,17 @@
 #include "os.h"
 
 #ifdef CONFIG_NOCONFIG_CHAN
+
+/* The printk's here are wrong because we are complaining that there is no
+ * output device, but printk is printing to that output device.  The user will
+ * never see the error.  printf would be better, except it can't run on a
+ * kernel stack because it will overflow it.
+ * Use printk for now since that will avoid crashing.
+ */
+
 static void *not_configged_init(char *str, int device, struct chan_opts *opts)
 {
-	printf(KERN_ERR "Using a channel type which is configured out of "
+	printk(KERN_ERR "Using a channel type which is configured out of "
 	       "UML\n");
 	return(NULL);
 }
@@ -30,27 +38,27 @@ static void *not_configged_init(char *str, int device, struct chan_opts *opts)
 static int not_configged_open(int input, int output, int primary, void *data,
 			      char **dev_out)
 {
-	printf(KERN_ERR "Using a channel type which is configured out of "
+	printk(KERN_ERR "Using a channel type which is configured out of "
 	       "UML\n");
 	return(-ENODEV);
 }
 
 static void not_configged_close(int fd, void *data)
 {
-	printf(KERN_ERR "Using a channel type which is configured out of "
+	printk(KERN_ERR "Using a channel type which is configured out of "
 	       "UML\n");
 }
 
 static int not_configged_read(int fd, char *c_out, void *data)
 {
-	printf(KERN_ERR "Using a channel type which is configured out of "
+	printk(KERN_ERR "Using a channel type which is configured out of "
 	       "UML\n");
 	return(-EIO);
 }
 
 static int not_configged_write(int fd, const char *buf, int len, void *data)
 {
-	printf(KERN_ERR "Using a channel type which is configured out of "
+	printk(KERN_ERR "Using a channel type which is configured out of "
 	       "UML\n");
 	return(-EIO);
 }
@@ -58,7 +66,7 @@ static int not_configged_write(int fd, const char *buf, int len, void *data)
 static int not_configged_console_write(int fd, const char *buf, int len,
 				       void *data)
 {
-	printf(KERN_ERR "Using a channel type which is configured out of "
+	printk(KERN_ERR "Using a channel type which is configured out of "
 	       "UML\n");
 	return(-EIO);
 }
@@ -66,7 +74,7 @@ static int not_configged_console_write(int fd, const char *buf, int len,
 static int not_configged_window_size(int fd, void *data, unsigned short *rows,
 				     unsigned short *cols)
 {
-	printf(KERN_ERR "Using a channel type which is configured out of "
+	printk(KERN_ERR "Using a channel type which is configured out of "
 	       "UML\n");
 	return(-ENODEV);
 }
diff --git a/arch/um/drivers/mcast_kern.c b/arch/um/drivers/mcast_kern.c
index faf714e..217438c 100644
--- a/arch/um/drivers/mcast_kern.c
+++ b/arch/um/drivers/mcast_kern.c
@@ -73,7 +73,6 @@ int mcast_setup(char *str, char **mac_out, void *data)
 	struct mcast_init *init = data;
 	char *port_str = NULL, *ttl_str = NULL, *remain;
 	char *last;
-	int n;
 
 	*init = ((struct mcast_init)
 		{ .addr 	= "239.192.168.1",
@@ -89,13 +88,12 @@ int mcast_setup(char *str, char **mac_out, void *data)
 	}
 	
 	if(port_str != NULL){
-		n = simple_strtoul(port_str, &last, 10);
+		init->port = simple_strtoul(port_str, &last, 10);
 		if((*last != '\0') || (last == port_str)){
 			printk(KERN_ERR "mcast_setup - Bad port : '%s'\n", 
 			       port_str);
 			return(0);
 		}
-		init->port = htons(n);
 	}
 
 	if(ttl_str != NULL){
diff --git a/arch/um/drivers/mcast_user.c b/arch/um/drivers/mcast_user.c
index 0fe1d9f..7a0d115 100644
--- a/arch/um/drivers/mcast_user.c
+++ b/arch/um/drivers/mcast_user.c
@@ -38,7 +38,7 @@ static struct sockaddr_in *new_addr(char *addr, unsigned short port)
 	}
 	sin->sin_family = AF_INET;
 	sin->sin_addr.s_addr = in_aton(addr);
-	sin->sin_port = port;
+	sin->sin_port = htons(port);
 	return(sin);
 }
 
@@ -55,28 +55,25 @@ static int mcast_open(void *data)
 	struct mcast_data *pri = data;
 	struct sockaddr_in *sin = pri->mcast_addr;
 	struct ip_mreq mreq;
-	int fd, yes = 1;
+	int fd = -EINVAL, yes = 1, err = -EINVAL;;
 
 
-	if ((sin->sin_addr.s_addr == 0) || (sin->sin_port == 0)) {
-		fd = -EINVAL;
+	if ((sin->sin_addr.s_addr == 0) || (sin->sin_port == 0))
 		goto out;
-	}
 
 	fd = socket(AF_INET, SOCK_DGRAM, 0);
+
 	if (fd < 0){
 		printk("mcast_open : data socket failed, errno = %d\n", 
 		       errno);
-		fd = -ENOMEM;
+		fd = -errno;
 		goto out;
 	}
 
 	if (setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, &yes, sizeof(yes)) < 0) {
 		printk("mcast_open: SO_REUSEADDR failed, errno = %d\n",
 			errno);
-		os_close_file(fd);
-		fd = -EINVAL;
-		goto out;
+		goto out_close;
 	}
 
 	/* set ttl according to config */
@@ -84,26 +81,20 @@ static int mcast_open(void *data)
 		       sizeof(pri->ttl)) < 0) {
 		printk("mcast_open: IP_MULTICAST_TTL failed, error = %d\n",
 			errno);
-		os_close_file(fd);
-		fd = -EINVAL;
-		goto out;
+		goto out_close;
 	}
 
 	/* set LOOP, so data does get fed back to local sockets */
 	if (setsockopt(fd, SOL_IP, IP_MULTICAST_LOOP, &yes, sizeof(yes)) < 0) {
 		printk("mcast_open: IP_MULTICAST_LOOP failed, error = %d\n",
 			errno);
-		os_close_file(fd);
-		fd = -EINVAL;
-		goto out;
+		goto out_close;
 	}
 
 	/* bind socket to mcast address */
 	if (bind(fd, (struct sockaddr *) sin, sizeof(*sin)) < 0) {
 		printk("mcast_open : data bind failed, errno = %d\n", errno);
-		os_close_file(fd);
-		fd = -EINVAL;
-		goto out;
+		goto out_close;
 	}		
 	
 	/* subscribe to the multicast group */
@@ -117,12 +108,15 @@ static int mcast_open(void *data)
 		       "interface on the host.\n");
 		printk("eth0 should be configured in order to use the "
 		       "multicast transport.\n");
-		os_close_file(fd);
-		fd = -EINVAL;
+                goto out_close;
 	}
 
  out:
-	return(fd);
+	return fd;
+
+ out_close:
+        os_close_file(fd);
+        return err;
 }
 
 static void mcast_close(int fd, void *data)
@@ -164,14 +158,3 @@ struct net_user_info mcast_user_info = {
 	.delete_address = NULL,
 	.max_packet	= MAX_PACKET - ETH_HEADER_OTHER
 };
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/drivers/random.c b/arch/um/drivers/random.c
index d43e9fa..f9e2219 100644
--- a/arch/um/drivers/random.c
+++ b/arch/um/drivers/random.c
@@ -1,5 +1,10 @@
-/* Much of this ripped from hw_random.c */
-
+/* Copyright (C) 2005 Jeff Dike <jdike@addtoit.com> */
+/* Much of this ripped from drivers/char/hw_random.c, see there for other
+ * copyright.
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ */
 #include <linux/module.h>
 #include <linux/fs.h>
 #include <linux/miscdevice.h>
@@ -12,8 +17,6 @@
  */
 #define RNG_VERSION "1.0.0"
 #define RNG_MODULE_NAME "random"
-#define RNG_DRIVER_NAME   RNG_MODULE_NAME " virtual driver " RNG_VERSION
-#define PFX RNG_MODULE_NAME ": "
 
 #define RNG_MISCDEV_MINOR		183 /* official */
 
@@ -98,7 +101,7 @@ static int __init rng_init (void)
 
 	err = misc_register (&rng_miscdev);
 	if (err) {
-		printk (KERN_ERR PFX "misc device register failed\n");
+		printk (KERN_ERR RNG_MODULE_NAME ": misc device register failed\n");
 		goto err_out_cleanup_hw;
 	}
 
@@ -120,3 +123,6 @@ static void __exit rng_cleanup (void)
 
 module_init (rng_init);
 module_exit (rng_cleanup);
+
+MODULE_DESCRIPTION("UML Host Random Number Generator (RNG) driver");
+MODULE_LICENSE("GPL");
diff --git a/arch/um/drivers/ssl.c b/arch/um/drivers/ssl.c
index a2bac42..b32a770 100644
--- a/arch/um/drivers/ssl.c
+++ b/arch/um/drivers/ssl.c
@@ -22,7 +22,6 @@
 #include "init.h"
 #include "irq_user.h"
 #include "mconsole_kern.h"
-#include "2_5compat.h"
 
 static int ssl_version = 1;
 
diff --git a/arch/um/drivers/stdio_console.c b/arch/um/drivers/stdio_console.c
index 361d0be..afbe1e7 100644
--- a/arch/um/drivers/stdio_console.c
+++ b/arch/um/drivers/stdio_console.c
@@ -28,7 +28,6 @@
 #include "irq_user.h"
 #include "mconsole_kern.h"
 #include "init.h"
-#include "2_5compat.h"
 
 #define MAX_TTYS (16)
 
diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c
index 9a56ff9..2a7f689 100644
--- a/arch/um/drivers/ubd_kern.c
+++ b/arch/um/drivers/ubd_kern.c
@@ -49,13 +49,12 @@
 #include "irq_user.h"
 #include "irq_kern.h"
 #include "ubd_user.h"
-#include "2_5compat.h"
 #include "os.h"
 #include "mem.h"
 #include "mem_kern.h"
 #include "cow.h"
 
-enum ubd_req { UBD_READ, UBD_WRITE, UBD_MMAP };
+enum ubd_req { UBD_READ, UBD_WRITE };
 
 struct io_thread_req {
 	enum ubd_req op;
@@ -68,8 +67,6 @@ struct io_thread_req {
 	unsigned long sector_mask;
 	unsigned long long cow_offset;
 	unsigned long bitmap_words[2];
-	int map_fd;
-	unsigned long long map_offset;
 	int error;
 };
 
@@ -122,10 +119,6 @@ static int ubd_ioctl(struct inode * inode, struct file * file,
 
 #define MAX_DEV (8)
 
-/* Changed in early boot */
-static int ubd_do_mmap = 0;
-#define UBD_MMAP_BLOCK_SIZE PAGE_SIZE
-
 static struct block_device_operations ubd_blops = {
         .owner		= THIS_MODULE,
         .open		= ubd_open,
@@ -175,12 +168,6 @@ struct ubd {
 	int no_cow;
 	struct cow cow;
 	struct platform_device pdev;
-
-	int map_writes;
-	int map_reads;
-	int nomap_writes;
-	int nomap_reads;
-	int write_maps;
 };
 
 #define DEFAULT_COW { \
@@ -200,11 +187,6 @@ struct ubd {
 	.openflags =		OPEN_FLAGS, \
         .no_cow =               0, \
         .cow =			DEFAULT_COW, \
-	.map_writes		= 0, \
-	.map_reads		= 0, \
-	.nomap_writes		= 0, \
-	.nomap_reads		= 0, \
-	.write_maps		= 0, \
 }
 
 struct ubd ubd_dev[MAX_DEV] = { [ 0 ... MAX_DEV - 1 ] = DEFAULT_UBD };
@@ -314,13 +296,6 @@ static int ubd_setup_common(char *str, int *index_out)
 		int major;
 
 		str++;
-		if(!strcmp(str, "mmap")){
-			CHOOSE_MODE(printk("mmap not supported by the ubd "
-					   "driver in tt mode\n"),
-				    ubd_do_mmap = 1);
-			return(0);
-		}
-
 		if(!strcmp(str, "sync")){
 			global_openflags = of_sync(global_openflags);
 			return(0);
@@ -464,9 +439,9 @@ static int udb_setup(char *str)
 __setup("udb", udb_setup);
 __uml_help(udb_setup,
 "udb\n"
-"    This option is here solely to catch ubd -> udb typos, which can be\n\n"
-"    to impossible to catch visually unless you specifically look for\n\n"
-"    them.  The only result of any option starting with 'udb' is an error\n\n"
+"    This option is here solely to catch ubd -> udb typos, which can be\n"
+"    to impossible to catch visually unless you specifically look for\n"
+"    them.  The only result of any option starting with 'udb' is an error\n"
 "    in the boot output.\n\n"
 );
 
@@ -524,7 +499,7 @@ static void ubd_handler(void)
 {
 	struct io_thread_req req;
 	struct request *rq = elv_next_request(ubd_queue);
-	int n, err;
+	int n;
 
 	do_ubd = NULL;
 	intr_count++;
@@ -538,19 +513,6 @@ static void ubd_handler(void)
 		return;
 	}
         
-	if((req.op != UBD_MMAP) &&
-	   ((req.offset != ((__u64) (rq->sector)) << 9) ||
-	    (req.length != (rq->current_nr_sectors) << 9)))
-		panic("I/O op mismatch");
-	
-	if(req.map_fd != -1){
-		err = physmem_subst_mapping(req.buffer, req.map_fd,
-					    req.map_offset, 1);
-		if(err)
-			printk("ubd_handler - physmem_subst_mapping failed, "
-			       "err = %d\n", -err);
-	}
-
 	ubd_finish(rq, req.error);
 	reactivate_fd(thread_fd, UBD_IRQ);	
 	do_ubd_request(ubd_queue);
@@ -583,14 +545,10 @@ static int ubd_file_size(struct ubd *dev, __u64 *size_out)
 
 static void ubd_close(struct ubd *dev)
 {
-	if(ubd_do_mmap)
-		physmem_forget_descriptor(dev->fd);
 	os_close_file(dev->fd);
 	if(dev->cow.file == NULL)
 		return;
 
-	if(ubd_do_mmap)
-		physmem_forget_descriptor(dev->cow.fd);
 	os_close_file(dev->cow.fd);
 	vfree(dev->cow.bitmap);
 	dev->cow.bitmap = NULL;
@@ -1010,94 +968,13 @@ static void cowify_req(struct io_thread_req *req, unsigned long *bitmap,
 			   req->bitmap_words, bitmap_len);
 }
 
-static int mmap_fd(struct request *req, struct ubd *dev, __u64 offset)
-{
-	__u64 sector;
-	unsigned char *bitmap;
-	int bit, i;
-
-	/* mmap must have been requested on the command line */
-	if(!ubd_do_mmap)
-		return(-1);
-
-	/* The buffer must be page aligned */
-	if(((unsigned long) req->buffer % UBD_MMAP_BLOCK_SIZE) != 0)
-		return(-1);
-
-	/* The request must be a page long */
-	if((req->current_nr_sectors << 9) != PAGE_SIZE)
-		return(-1);
-
-	if(dev->cow.file == NULL)
-		return(dev->fd);
-
-	sector = offset >> 9;
-	bitmap = (unsigned char *) dev->cow.bitmap;
-	bit = ubd_test_bit(sector, bitmap);
-
-	for(i = 1; i < req->current_nr_sectors; i++){
-		if(ubd_test_bit(sector + i, bitmap) != bit)
-			return(-1);
-	}
-
-	if(bit || (rq_data_dir(req) == WRITE))
-		offset += dev->cow.data_offset;
-
-	/* The data on disk must be page aligned */
-	if((offset % UBD_MMAP_BLOCK_SIZE) != 0)
-		return(-1);
-
-	return(bit ? dev->fd : dev->cow.fd);
-}
-
-static int prepare_mmap_request(struct ubd *dev, int fd, __u64 offset,
-				struct request *req,
-				struct io_thread_req *io_req)
-{
-	int err;
-
-	if(rq_data_dir(req) == WRITE){
-		/* Writes are almost no-ops since the new data is already in the
-		 * host page cache
-		 */
-		dev->map_writes++;
-		if(dev->cow.file != NULL)
-			cowify_bitmap(io_req->offset, io_req->length,
-				      &io_req->sector_mask, &io_req->cow_offset,
-				      dev->cow.bitmap, dev->cow.bitmap_offset,
-				      io_req->bitmap_words,
-				      dev->cow.bitmap_len);
-	}
-	else {
-		int w;
-
-		if((dev->cow.file != NULL) && (fd == dev->cow.fd))
-			w = 0;
-		else w = dev->openflags.w;
-
-		if((dev->cow.file != NULL) && (fd == dev->fd))
-			offset += dev->cow.data_offset;
-
-		err = physmem_subst_mapping(req->buffer, fd, offset, w);
-		if(err){
-			printk("physmem_subst_mapping failed, err = %d\n",
-			       -err);
-			return(1);
-		}
-		dev->map_reads++;
-	}
-	io_req->op = UBD_MMAP;
-	io_req->buffer = req->buffer;
-	return(0);
-}
-
 /* Called with ubd_io_lock held */
 static int prepare_request(struct request *req, struct io_thread_req *io_req)
 {
 	struct gendisk *disk = req->rq_disk;
 	struct ubd *dev = disk->private_data;
 	__u64 offset;
-	int len, fd;
+	int len;
 
 	if(req->rq_status == RQ_INACTIVE) return(1);
 
@@ -1114,34 +991,12 @@ static int prepare_request(struct request *req, struct io_thread_req *io_req)
 
 	io_req->fds[0] = (dev->cow.file != NULL) ? dev->cow.fd : dev->fd;
 	io_req->fds[1] = dev->fd;
-	io_req->map_fd = -1;
 	io_req->cow_offset = -1;
 	io_req->offset = offset;
 	io_req->length = len;
 	io_req->error = 0;
 	io_req->sector_mask = 0;
 
-	fd = mmap_fd(req, dev, io_req->offset);
-	if(fd > 0){
-		/* If mmapping is otherwise OK, but the first access to the
-		 * page is a write, then it's not mapped in yet.  So we have
-		 * to write the data to disk first, then we can map the disk
-		 * page in and continue normally from there.
-		 */
-		if((rq_data_dir(req) == WRITE) && !is_remapped(req->buffer)){
-			io_req->map_fd = dev->fd;
-			io_req->map_offset = io_req->offset +
-				dev->cow.data_offset;
-			dev->write_maps++;
-		}
-		else return(prepare_mmap_request(dev, fd, io_req->offset, req,
-						 io_req));
-	}
-
-	if(rq_data_dir(req) == READ)
-		dev->nomap_reads++;
-	else dev->nomap_writes++;
-
 	io_req->op = (rq_data_dir(req) == READ) ? UBD_READ : UBD_WRITE;
 	io_req->offsets[0] = 0;
 	io_req->offsets[1] = dev->cow.data_offset;
@@ -1229,143 +1084,6 @@ static int ubd_ioctl(struct inode * inode, struct file * file,
 	return(-EINVAL);
 }
 
-static int ubd_check_remapped(int fd, unsigned long address, int is_write,
-			      __u64 offset)
-{
-	__u64 bitmap_offset;
-	unsigned long new_bitmap[2];
-	int i, err, n;
-
-	/* If it's not a write access, we can't do anything about it */
-	if(!is_write)
-		return(0);
-
-	/* We have a write */
-	for(i = 0; i < sizeof(ubd_dev) / sizeof(ubd_dev[0]); i++){
-		struct ubd *dev = &ubd_dev[i];
-
-		if((dev->fd != fd) && (dev->cow.fd != fd))
-			continue;
-
-		/* It's a write to a ubd device */
-
-		/* This should be impossible now */
-		if(!dev->openflags.w){
-			/* It's a write access on a read-only device - probably
-			 * shouldn't happen.  If the kernel is trying to change
-			 * something with no intention of writing it back out,
-			 * then this message will clue us in that this needs
-			 * fixing
-			 */
-			printk("Write access to mapped page from readonly ubd "
-			       "device %d\n", i);
-			return(0);
-		}
-
-		/* It's a write to a writeable ubd device - it must be COWed
-		 * because, otherwise, the page would have been mapped in
-		 * writeable
-		 */
-
-		if(!dev->cow.file)
-			panic("Write fault on writeable non-COW ubd device %d",
-			      i);
-
-		/* It should also be an access to the backing file since the
-		 * COW pages should be mapped in read-write
-		 */
-
-		if(fd == dev->fd)
-			panic("Write fault on a backing page of ubd "
-			      "device %d\n", i);
-
-		/* So, we do the write, copying the backing data to the COW
-		 * file...
-		 */
-
-		err = os_seek_file(dev->fd, offset + dev->cow.data_offset);
-		if(err < 0)
-			panic("Couldn't seek to %lld in COW file of ubd "
-			      "device %d, err = %d",
-			      offset + dev->cow.data_offset, i, -err);
-
-		n = os_write_file(dev->fd, (void *) address, PAGE_SIZE);
-		if(n != PAGE_SIZE)
-			panic("Couldn't copy data to COW file of ubd "
-			      "device %d, err = %d", i, -n);
-
-		/* ... updating the COW bitmap... */
-
-		cowify_bitmap(offset, PAGE_SIZE, NULL, &bitmap_offset,
-			      dev->cow.bitmap, dev->cow.bitmap_offset,
-			      new_bitmap, dev->cow.bitmap_len);
-
-		err = os_seek_file(dev->fd, bitmap_offset);
-		if(err < 0)
-			panic("Couldn't seek to %lld in COW file of ubd "
-			      "device %d, err = %d", bitmap_offset, i, -err);
-
-		n = os_write_file(dev->fd, new_bitmap, sizeof(new_bitmap));
-		if(n != sizeof(new_bitmap))
-			panic("Couldn't update bitmap  of ubd device %d, "
-			      "err = %d", i, -n);
-
-		/* Maybe we can map the COW page in, and maybe we can't.  If
-		 * it is a pre-V3 COW file, we can't, since the alignment will
-		 * be wrong.  If it is a V3 or later COW file which has been
-		 * moved to a system with a larger page size, then maybe we
-		 * can't, depending on the exact location of the page.
-		 */
-
-		offset += dev->cow.data_offset;
-
-		/* Remove the remapping, putting the original anonymous page
-		 * back.  If the COW file can be mapped in, that is done.
-		 * Otherwise, the COW page is read in.
-		 */
-
-		if(!physmem_remove_mapping((void *) address))
-			panic("Address 0x%lx not remapped by ubd device %d",
-			      address, i);
-		if((offset % UBD_MMAP_BLOCK_SIZE) == 0)
-			physmem_subst_mapping((void *) address, dev->fd,
-					      offset, 1);
-		else {
-			err = os_seek_file(dev->fd, offset);
-			if(err < 0)
-				panic("Couldn't seek to %lld in COW file of "
-				      "ubd device %d, err = %d", offset, i,
-				      -err);
-
-			n = os_read_file(dev->fd, (void *) address, PAGE_SIZE);
-			if(n != PAGE_SIZE)
-				panic("Failed to read page from offset %llx of "
-				      "COW file of ubd device %d, err = %d",
-				      offset, i, -n);
-		}
-
-		return(1);
-	}
-
-	/* It's not a write on a ubd device */
-	return(0);
-}
-
-static struct remapper ubd_remapper = {
-	.list	= LIST_HEAD_INIT(ubd_remapper.list),
-	.proc	= ubd_check_remapped,
-};
-
-static int ubd_remapper_setup(void)
-{
-	if(ubd_do_mmap)
-		register_remapper(&ubd_remapper);
-
-	return(0);
-}
-
-__initcall(ubd_remapper_setup);
-
 static int same_backing_files(char *from_cmdline, char *from_cow, char *cow)
 {
 	struct uml_stat buf1, buf2;
@@ -1568,15 +1286,6 @@ void do_io(struct io_thread_req *req)
 	int err;
 	__u64 off;
 
-	if(req->op == UBD_MMAP){
-		/* Touch the page to force the host to do any necessary IO to
-		 * get it into memory
-		 */
-		n = *((volatile int *) req->buffer);
-		req->error = update_bitmap(req);
-		return;
-	}
-
 	nsectors = req->length / req->sectorsize;
 	start = 0;
 	do {
diff --git a/arch/um/include/2_5compat.h b/arch/um/include/2_5compat.h
deleted file mode 100644
index abdb015..0000000
--- a/arch/um/include/2_5compat.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* 
- * Copyright (C) 2001 Jeff Dike (jdike@karaya.com)
- * Licensed under the GPL
- */
-
-#ifndef __2_5_COMPAT_H__
-#define __2_5_COMPAT_H__
-
-#define INIT_HARDSECT(arr, maj, sizes)
-
-#define SET_PRI(task) do ; while(0)
-
-#endif
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/include/sysdep-i386/ptrace.h b/arch/um/include/sysdep-i386/ptrace.h
index 84ec7ff..6eaeb99 100644
--- a/arch/um/include/sysdep-i386/ptrace.h
+++ b/arch/um/include/sysdep-i386/ptrace.h
@@ -31,7 +31,6 @@ extern int sysemu_supported;
 #ifdef UML_CONFIG_MODE_SKAS
 
 #include "skas_ptregs.h"
-#include "sysdep/faultinfo.h"
 
 #define REGS_IP(r) ((r)[HOST_IP])
 #define REGS_SP(r) ((r)[HOST_SP])
@@ -59,6 +58,7 @@ extern int sysemu_supported;
 #define PTRACE_SYSEMU_SINGLESTEP 32
 #endif
 
+#include "sysdep/faultinfo.h"
 #include "choose-mode.h"
 
 union uml_pt_regs {
diff --git a/arch/um/include/sysdep-x86_64/checksum.h b/arch/um/include/sysdep-x86_64/checksum.h
index 572c6c1..ea97005 100644
--- a/arch/um/include/sysdep-x86_64/checksum.h
+++ b/arch/um/include/sysdep-x86_64/checksum.h
@@ -9,8 +9,6 @@
 #include "linux/in6.h"
 #include "asm/uaccess.h"
 
-extern unsigned int csum_partial_copy_from(const unsigned char *src, unsigned char *dst, int len,
-					   int sum, int *err_ptr);
 extern unsigned csum_partial(const unsigned char *buff, unsigned len,
                              unsigned sum);
 
@@ -31,10 +29,15 @@ unsigned int csum_partial_copy_nocheck(const unsigned char *src, unsigned char *
 }
 
 static __inline__
-unsigned int csum_partial_copy_from_user(const unsigned char *src, unsigned char *dst,
-					 int len, int sum, int *err_ptr)
+unsigned int csum_partial_copy_from_user(const unsigned char *src,
+                                         unsigned char *dst, int len, int sum,
+                                         int *err_ptr)
 {
-	return csum_partial_copy_from(src, dst, len, sum, err_ptr);
+        if(copy_from_user(dst, src, len)){
+                *err_ptr = -EFAULT;
+                return(-1);
+        }
+        return csum_partial(dst, len, sum);
 }
 
 /**
@@ -137,15 +140,6 @@ static inline unsigned add32_with_carry(unsigned a, unsigned b)
         return a;
 }
 
-#endif
+extern unsigned short ip_compute_csum(unsigned char * buff, int len);
 
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
+#endif
diff --git a/arch/um/include/sysdep-x86_64/ptrace.h b/arch/um/include/sysdep-x86_64/ptrace.h
index 348e8fc..be8acd5 100644
--- a/arch/um/include/sysdep-x86_64/ptrace.h
+++ b/arch/um/include/sysdep-x86_64/ptrace.h
@@ -135,6 +135,7 @@ extern int mode_tt;
 	__CHOOSE_MODE(SC_EFLAGS(UPT_SC(r)), REGS_EFLAGS((r)->skas.regs))
 #define UPT_SC(r) ((r)->tt.sc)
 #define UPT_SYSCALL_NR(r) __CHOOSE_MODE((r)->tt.syscall, (r)->skas.syscall)
+#define UPT_SYSCALL_RET(r) UPT_RAX(r)
 
 extern int user_context(unsigned long sp);
 
@@ -196,32 +197,32 @@ struct syscall_args {
 
 
 #define UPT_SET(regs, reg, val) \
-        ({      unsigned long val; \
+        ({      unsigned long __upt_val = val; \
                 switch(reg){ \
-		case R8: UPT_R8(regs) = val; break; \
-		case R9: UPT_R9(regs) = val; break; \
-		case R10: UPT_R10(regs) = val; break; \
-		case R11: UPT_R11(regs) = val; break; \
-		case R12: UPT_R12(regs) = val; break; \
-		case R13: UPT_R13(regs) = val; break; \
-		case R14: UPT_R14(regs) = val; break; \
-		case R15: UPT_R15(regs) = val; break; \
-                case RIP: UPT_IP(regs) = val; break; \
-                case RSP: UPT_SP(regs) = val; break; \
-                case RAX: UPT_RAX(regs) = val; break; \
-                case RBX: UPT_RBX(regs) = val; break; \
-                case RCX: UPT_RCX(regs) = val; break; \
-                case RDX: UPT_RDX(regs) = val; break; \
-                case RSI: UPT_RSI(regs) = val; break; \
-                case RDI: UPT_RDI(regs) = val; break; \
-                case RBP: UPT_RBP(regs) = val; break; \
-                case ORIG_RAX: UPT_ORIG_RAX(regs) = val; break; \
-                case CS: UPT_CS(regs) = val; break; \
-                case DS: UPT_DS(regs) = val; break; \
-                case ES: UPT_ES(regs) = val; break; \
-                case FS: UPT_FS(regs) = val; break; \
-                case GS: UPT_GS(regs) = val; break; \
-                case EFLAGS: UPT_EFLAGS(regs) = val; break; \
+                case R8: UPT_R8(regs) = __upt_val; break; \
+                case R9: UPT_R9(regs) = __upt_val; break; \
+                case R10: UPT_R10(regs) = __upt_val; break; \
+                case R11: UPT_R11(regs) = __upt_val; break; \
+                case R12: UPT_R12(regs) = __upt_val; break; \
+                case R13: UPT_R13(regs) = __upt_val; break; \
+                case R14: UPT_R14(regs) = __upt_val; break; \
+                case R15: UPT_R15(regs) = __upt_val; break; \
+                case RIP: UPT_IP(regs) = __upt_val; break; \
+                case RSP: UPT_SP(regs) = __upt_val; break; \
+                case RAX: UPT_RAX(regs) = __upt_val; break; \
+                case RBX: UPT_RBX(regs) = __upt_val; break; \
+                case RCX: UPT_RCX(regs) = __upt_val; break; \
+                case RDX: UPT_RDX(regs) = __upt_val; break; \
+                case RSI: UPT_RSI(regs) = __upt_val; break; \
+                case RDI: UPT_RDI(regs) = __upt_val; break; \
+                case RBP: UPT_RBP(regs) = __upt_val; break; \
+                case ORIG_RAX: UPT_ORIG_RAX(regs) = __upt_val; break; \
+                case CS: UPT_CS(regs) = __upt_val; break; \
+                case DS: UPT_DS(regs) = __upt_val; break; \
+                case ES: UPT_ES(regs) = __upt_val; break; \
+                case FS: UPT_FS(regs) = __upt_val; break; \
+                case GS: UPT_GS(regs) = __upt_val; break; \
+                case EFLAGS: UPT_EFLAGS(regs) = __upt_val; break; \
                 default :  \
                         panic("Bad register in UPT_SET : %d\n", reg);  \
 			break; \
@@ -245,14 +246,3 @@ struct syscall_args {
         CHOOSE_MODE((&(r)->tt.faultinfo), (&(r)->skas.faultinfo))
 
 #endif
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/include/sysrq.h b/arch/um/include/sysrq.h
index 2ce9423..c8d332b 100644
--- a/arch/um/include/sysrq.h
+++ b/arch/um/include/sysrq.h
@@ -1,6 +1,7 @@
 #ifndef __UM_SYSRQ_H
 #define __UM_SYSRQ_H
 
-extern void show_trace(unsigned long *stack);
+struct task_struct;
+extern void show_trace(struct task_struct* task, unsigned long *stack);
 
 #endif
diff --git a/arch/um/kernel/Makefile b/arch/um/kernel/Makefile
index 9736ca2..a8918e80 100644
--- a/arch/um/kernel/Makefile
+++ b/arch/um/kernel/Makefile
@@ -14,7 +14,7 @@ obj-y = config.o exec_kern.o exitcode.o \
 	tlb.o trap_kern.o trap_user.o uaccess_user.o um_arch.o umid.o \
 	user_util.o
 
-obj-$(CONFIG_BLK_DEV_INITRD) += initrd_kern.o initrd_user.o
+obj-$(CONFIG_BLK_DEV_INITRD) += initrd.o
 obj-$(CONFIG_GPROF)	+= gprof_syms.o
 obj-$(CONFIG_GCOV)	+= gmon_syms.o
 obj-$(CONFIG_TTY_LOG)	+= tty_log.o
diff --git a/arch/um/kernel/checksum.c b/arch/um/kernel/checksum.c
deleted file mode 100644
index e69de29..0000000
--- a/arch/um/kernel/checksum.c
+++ /dev/null
diff --git a/arch/um/kernel/exec_kern.c b/arch/um/kernel/exec_kern.c
index 49ddabe..efd222f 100644
--- a/arch/um/kernel/exec_kern.c
+++ b/arch/um/kernel/exec_kern.c
@@ -16,7 +16,6 @@
 #include "kern.h"
 #include "irq_user.h"
 #include "tlb.h"
-#include "2_5compat.h"
 #include "os.h"
 #include "time_user.h"
 #include "choose-mode.h"
diff --git a/arch/um/kernel/initrd_kern.c b/arch/um/kernel/initrd.c
index fc568af..82ecf90 100644
--- a/arch/um/kernel/initrd_kern.c
+++ b/arch/um/kernel/initrd.c
@@ -41,12 +41,31 @@ static int __init uml_initrd_setup(char *line, int *add)
 	return 0;
 }
 
-__uml_setup("initrd=", uml_initrd_setup, 
+__uml_setup("initrd=", uml_initrd_setup,
 "initrd=<initrd image>\n"
 "    This is used to boot UML from an initrd image.  The argument is the\n"
 "    name of the file containing the image.\n\n"
 );
 
+int load_initrd(char *filename, void *buf, int size)
+{
+	int fd, n;
+
+	fd = os_open_file(filename, of_read(OPENFLAGS()), 0);
+	if(fd < 0){
+		printk("Opening '%s' failed - err = %d\n", filename, -fd);
+		return(-1);
+	}
+	n = os_read_file(fd, buf, size);
+	if(n != size){
+		printk("Read of %d bytes from '%s' failed, err = %d\n", size,
+		       filename, -n);
+		return(-1);
+	}
+
+	os_close_file(fd);
+	return(0);
+}
 /*
  * Overrides for Emacs so that we follow Linus's tabbing style.
  * Emacs will notice this stuff at the end of the file and automatically
diff --git a/arch/um/kernel/initrd_user.c b/arch/um/kernel/initrd_user.c
deleted file mode 100644
index cb90681..0000000
--- a/arch/um/kernel/initrd_user.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * Copyright (C) 2000, 2001 Jeff Dike (jdike@karaya.com)
- * Licensed under the GPL
- */
-
-#include <unistd.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <errno.h>
-
-#include "user_util.h"
-#include "kern_util.h"
-#include "user.h"
-#include "initrd.h"
-#include "os.h"
-
-int load_initrd(char *filename, void *buf, int size)
-{
-	int fd, n;
-
-	fd = os_open_file(filename, of_read(OPENFLAGS()), 0);
-	if(fd < 0){
-		printk("Opening '%s' failed - err = %d\n", filename, -fd);
-		return(-1);
-	}
-	n = os_read_file(fd, buf, size);
-	if(n != size){
-		printk("Read of %d bytes from '%s' failed, err = %d\n", size,
-		       filename, -n);
-		return(-1);
-	}
-
-	os_close_file(fd);
-	return(0);
-}
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/kernel/ksyms.c b/arch/um/kernel/ksyms.c
index 78d69dc..99439fa 100644
--- a/arch/um/kernel/ksyms.c
+++ b/arch/um/kernel/ksyms.c
@@ -57,6 +57,7 @@ EXPORT_SYMBOL(copy_to_user_tt);
 EXPORT_SYMBOL(strncpy_from_user_skas);
 EXPORT_SYMBOL(copy_to_user_skas);
 EXPORT_SYMBOL(copy_from_user_skas);
+EXPORT_SYMBOL(clear_user_skas);
 #endif
 EXPORT_SYMBOL(uml_strdup);
 
diff --git a/arch/um/kernel/main.c b/arch/um/kernel/main.c
index a17c497..e42e636 100644
--- a/arch/um/kernel/main.c
+++ b/arch/um/kernel/main.c
@@ -71,7 +71,7 @@ static __init void do_uml_initcalls(void)
 
 static void last_ditch_exit(int sig)
 {
-	CHOOSE_MODE(kmalloc_ok = 0, (void) 0);
+        kmalloc_ok = 0;
 	signal(SIGINT, SIG_DFL);
 	signal(SIGTERM, SIG_DFL);
 	signal(SIGHUP, SIG_DFL);
@@ -87,7 +87,7 @@ int main(int argc, char **argv, char **envp)
 {
 	char **new_argv;
 	sigset_t mask;
-	int ret, i;
+	int ret, i, err;
 
 	/* Enable all signals except SIGIO - in some environments, we can
 	 * enter with some signals blocked
@@ -160,27 +160,29 @@ int main(int argc, char **argv, char **envp)
 	 */
 	change_sig(SIGPROF, 0);
 
-	/* Reboot */
-	if(ret){
-		int err;
-
-		printf("\n");
+        /* This signal stuff used to be in the reboot case.  However,
+         * sometimes a SIGVTALRM can come in when we're halting (reproducably
+         * when writing out gcov information, presumably because that takes
+         * some time) and cause a segfault.
+         */
 
-		/* stop timers and set SIG*ALRM to be ignored */
-		disable_timer();
+        /* stop timers and set SIG*ALRM to be ignored */
+        disable_timer();
 
-		/* disable SIGIO for the fds and set SIGIO to be ignored */
-		err = deactivate_all_fds();
-		if(err)
-			printf("deactivate_all_fds failed, errno = %d\n",
-			       -err);
+        /* disable SIGIO for the fds and set SIGIO to be ignored */
+        err = deactivate_all_fds();
+        if(err)
+                printf("deactivate_all_fds failed, errno = %d\n", -err);
 
-		/* Let any pending signals fire now.  This ensures
-		 * that they won't be delivered after the exec, when
-		 * they are definitely not expected.
-		 */
-		unblock_signals();
+        /* Let any pending signals fire now.  This ensures
+         * that they won't be delivered after the exec, when
+         * they are definitely not expected.
+         */
+        unblock_signals();
 
+	/* Reboot */
+	if(ret){
+		printf("\n");
 		execvp(new_argv[0], new_argv);
 		perror("Failed to exec kernel");
 		ret = 1;
diff --git a/arch/um/kernel/mem.c b/arch/um/kernel/mem.c
index f156661..c22825f 100644
--- a/arch/um/kernel/mem.c
+++ b/arch/um/kernel/mem.c
@@ -100,12 +100,37 @@ void mem_init(void)
 #endif
 }
 
+/*
+ * Create a page table and place a pointer to it in a middle page
+ * directory entry.
+ */
+static void __init one_page_table_init(pmd_t *pmd)
+{
+	if (pmd_none(*pmd)) {
+		pte_t *pte = (pte_t *) alloc_bootmem_low_pages(PAGE_SIZE);
+		set_pmd(pmd, __pmd(_KERNPG_TABLE +
+					   (unsigned long) __pa(pte)));
+		if (pte != pte_offset_kernel(pmd, 0))
+			BUG();
+	}
+}
+
+static void __init one_md_table_init(pud_t *pud)
+{
+#ifdef CONFIG_3_LEVEL_PGTABLES
+	pmd_t *pmd_table = (pmd_t *) alloc_bootmem_low_pages(PAGE_SIZE);
+	set_pud(pud, __pud(_KERNPG_TABLE + (unsigned long) __pa(pmd_table)));
+	if (pmd_table != pmd_offset(pud, 0))
+		BUG();
+#endif
+}
+
 static void __init fixrange_init(unsigned long start, unsigned long end, 
 				 pgd_t *pgd_base)
 {
 	pgd_t *pgd;
+	pud_t *pud;
 	pmd_t *pmd;
-	pte_t *pte;
 	int i, j;
 	unsigned long vaddr;
 
@@ -115,15 +140,12 @@ static void __init fixrange_init(unsigned long start, unsigned long end,
 	pgd = pgd_base + i;
 
 	for ( ; (i < PTRS_PER_PGD) && (vaddr < end); pgd++, i++) {
-		pmd = (pmd_t *)pgd;
+		pud = pud_offset(pgd, vaddr);
+		if (pud_none(*pud))
+			one_md_table_init(pud);
+		pmd = pmd_offset(pud, vaddr);
 		for (; (j < PTRS_PER_PMD) && (vaddr != end); pmd++, j++) {
-			if (pmd_none(*pmd)) {
-				pte = (pte_t *) alloc_bootmem_low_pages(PAGE_SIZE);
-				set_pmd(pmd, __pmd(_KERNPG_TABLE + 
-						   (unsigned long) __pa(pte)));
-				if (pte != pte_offset_kernel(pmd, 0))
-					BUG();
-			}
+			one_page_table_init(pmd);
 			vaddr += PMD_SIZE;
 		}
 		j = 0;
diff --git a/arch/um/kernel/process_kern.c b/arch/um/kernel/process_kern.c
index c1adf7b..804c6bb 100644
--- a/arch/um/kernel/process_kern.c
+++ b/arch/um/kernel/process_kern.c
@@ -43,7 +43,6 @@
 #include "tlb.h"
 #include "frame_kern.h"
 #include "sigcontext.h"
-#include "2_5compat.h"
 #include "os.h"
 #include "mode.h"
 #include "mode_kern.h"
@@ -55,18 +54,6 @@
  */
 struct cpu_task cpu_tasks[NR_CPUS] = { [0 ... NR_CPUS - 1] = { -1, NULL } };
 
-struct task_struct *get_task(int pid, int require)
-{
-        struct task_struct *ret;
-
-        read_lock(&tasklist_lock);
-	ret = find_task_by_pid(pid);
-        read_unlock(&tasklist_lock);
-
-        if(require && (ret == NULL)) panic("get_task couldn't find a task\n");
-        return(ret);
-}
-
 int external_pid(void *t)
 {
 	struct task_struct *task = t ? t : current;
@@ -189,7 +176,6 @@ void default_idle(void)
 
 	while(1){
 		/* endless idle loop with no priority at all */
-		SET_PRI(current);
 
 		/*
 		 * although we are an idle CPU, we do not want to
@@ -212,11 +198,6 @@ int page_size(void)
 	return(PAGE_SIZE);
 }
 
-unsigned long page_mask(void)
-{
-	return(PAGE_MASK);
-}
-
 void *um_virt_to_phys(struct task_struct *task, unsigned long addr, 
 		      pte_t *pte_out)
 {
@@ -349,11 +330,6 @@ char *uml_strdup(char *string)
 	return(new);
 }
 
-void *get_init_task(void)
-{
-	return(&init_thread_union.thread_info.task);
-}
-
 int copy_to_user_proc(void __user *to, void *from, int size)
 {
 	return(copy_to_user(to, from, size));
@@ -480,15 +456,3 @@ unsigned long arch_align_stack(unsigned long sp)
 	return sp & ~0xf;
 }
 #endif
-
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/kernel/ptrace.c b/arch/um/kernel/ptrace.c
index 2b75d8d..71af4d5 100644
--- a/arch/um/kernel/ptrace.c
+++ b/arch/um/kernel/ptrace.c
@@ -28,9 +28,9 @@ static inline void set_singlestepping(struct task_struct *child, int on)
         child->thread.singlestep_syscall = 0;
 
 #ifdef SUBARCH_SET_SINGLESTEPPING
-        SUBARCH_SET_SINGLESTEPPING(child, on)
+        SUBARCH_SET_SINGLESTEPPING(child, on);
 #endif
-                }
+}
 
 /*
  * Called by kernel/ptrace.c when detaching..
@@ -83,7 +83,7 @@ long sys_ptrace(long request, long pid, long addr, long data)
 	}
 
 #ifdef SUBACH_PTRACE_SPECIAL
-        SUBARCH_PTRACE_SPECIAL(child,request,addr,data)
+        SUBARCH_PTRACE_SPECIAL(child,request,addr,data);
 #endif
 
 	ret = ptrace_check_attach(child, request == PTRACE_KILL);
@@ -322,11 +322,9 @@ void syscall_trace(union uml_pt_regs *regs, int entryexit)
 					    UPT_SYSCALL_ARG2(regs),
 					    UPT_SYSCALL_ARG3(regs),
 					    UPT_SYSCALL_ARG4(regs));
-		else {
-                        int res = UPT_SYSCALL_RET(regs);
-			audit_syscall_exit(current, AUDITSC_RESULT(res),
-                                           res);
-                }
+		else audit_syscall_exit(current,
+                                        AUDITSC_RESULT(UPT_SYSCALL_RET(regs)),
+                                        UPT_SYSCALL_RET(regs));
 	}
 
 	/* Fake a debug trap */
@@ -356,14 +354,3 @@ void syscall_trace(union uml_pt_regs *regs, int entryexit)
 		current->exit_code = 0;
 	}
 }
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/kernel/sysrq.c b/arch/um/kernel/sysrq.c
index e630438..f808500 100644
--- a/arch/um/kernel/sysrq.c
+++ b/arch/um/kernel/sysrq.c
@@ -3,6 +3,7 @@
  * Licensed under the GPL
  */
 
+#include "linux/config.h"
 #include "linux/sched.h"
 #include "linux/kernel.h"
 #include "linux/module.h"
@@ -12,14 +13,14 @@
 #include "sysrq.h"
 #include "user_util.h"
 
-void show_trace(unsigned long * stack)
+/* Catch non-i386 SUBARCH's. */
+#if !defined(CONFIG_UML_X86) || defined(CONFIG_64BIT)
+void show_trace(struct task_struct *task, unsigned long * stack)
 {
-	/* XXX: Copy the CONFIG_FRAME_POINTER stack-walking backtrace from
-	 * arch/i386/kernel/traps.c, and then move this to sys-i386/sysrq.c.*/
         unsigned long addr;
 
         if (!stack) {
-                stack = (unsigned long*) &stack;
+		stack = (unsigned long*) &stack;
 		WARN_ON(1);
 	}
 
@@ -35,6 +36,7 @@ void show_trace(unsigned long * stack)
         }
         printk("\n");
 }
+#endif
 
 /*
  * stack dumps generator - this is used by arch-independent code.
@@ -44,7 +46,7 @@ void dump_stack(void)
 {
 	unsigned long stack;
 
-	show_trace(&stack);
+	show_trace(current, &stack);
 }
 EXPORT_SYMBOL(dump_stack);
 
@@ -59,7 +61,11 @@ void show_stack(struct task_struct *task, unsigned long *esp)
 	int i;
 
 	if (esp == NULL) {
-		if (task != current) {
+		if (task != current && task != NULL) {
+			/* XXX: Isn't this bogus? I.e. isn't this the
+			 * *userspace* stack of this task? If not so, use this
+			 * even when task == current (as in i386).
+			 */
 			esp = (unsigned long *) KSTK_ESP(task);
 			/* Which one? No actual difference - just coding style.*/
 			//esp = (unsigned long *) PT_REGS_IP(&task->thread.regs);
@@ -77,5 +83,6 @@ void show_stack(struct task_struct *task, unsigned long *esp)
 		printk("%08lx ", *stack++);
 	}
 
-	show_trace(esp);
+	printk("Call Trace: \n");
+	show_trace(current, esp);
 }
diff --git a/arch/um/kernel/trap_kern.c b/arch/um/kernel/trap_kern.c
index 5fca2c6..c20aef1 100644
--- a/arch/um/kernel/trap_kern.c
+++ b/arch/um/kernel/trap_kern.c
@@ -23,7 +23,6 @@
 #include "kern.h"
 #include "chan_kern.h"
 #include "mconsole_kern.h"
-#include "2_5compat.h"
 #include "mem.h"
 #include "mem_kern.h"
 
@@ -57,10 +56,11 @@ int handle_page_fault(unsigned long address, unsigned long ip,
 	*code_out = SEGV_ACCERR;
 	if(is_write && !(vma->vm_flags & VM_WRITE)) 
 		goto out;
+
+        if(!(vma->vm_flags & (VM_READ | VM_EXEC)))
+                goto out;
+
 	page = address & PAGE_MASK;
-	pgd = pgd_offset(mm, page);
-	pud = pud_offset(pgd, page);
-	pmd = pmd_offset(pud, page);
 	do {
  survive:
 		switch (handle_mm_fault(mm, vma, address, is_write)){
@@ -106,33 +106,6 @@ out_of_memory:
 	goto out;
 }
 
-LIST_HEAD(physmem_remappers);
-
-void register_remapper(struct remapper *info)
-{
-	list_add(&info->list, &physmem_remappers);
-}
-
-static int check_remapped_addr(unsigned long address, int is_write)
-{
-	struct remapper *remapper;
-	struct list_head *ele;
-	__u64 offset;
-	int fd;
-
-	fd = phys_mapping(__pa(address), &offset);
-	if(fd == -1)
-		return(0);
-
-	list_for_each(ele, &physmem_remappers){
-		remapper = list_entry(ele, struct remapper, list);
-		if((*remapper->proc)(fd, address, is_write, offset))
-			return(1);
-	}
-
-	return(0);
-}
-
 /*
  * We give a *copy* of the faultinfo in the regs to segv.
  * This must be done, since nesting SEGVs could overwrite
@@ -151,8 +124,6 @@ unsigned long segv(struct faultinfo fi, unsigned long ip, int is_user, void *sc)
                 flush_tlb_kernel_vm();
                 return(0);
         }
-	else if(check_remapped_addr(address & PAGE_MASK, is_write))
-		return(0);
 	else if(current->mm == NULL)
 		panic("Segfault with no mm");
 	err = handle_page_fault(address, ip, is_write, is_user, &si.si_code);
diff --git a/arch/um/kernel/tt/ksyms.c b/arch/um/kernel/tt/ksyms.c
index 92ec85d..84a9385 100644
--- a/arch/um/kernel/tt/ksyms.c
+++ b/arch/um/kernel/tt/ksyms.c
@@ -12,6 +12,7 @@ EXPORT_SYMBOL(__do_copy_to_user);
 EXPORT_SYMBOL(__do_strncpy_from_user);
 EXPORT_SYMBOL(__do_strnlen_user); 
 EXPORT_SYMBOL(__do_clear_user);
+EXPORT_SYMBOL(clear_user_tt);
 
 EXPORT_SYMBOL(tracing_pid);
 EXPORT_SYMBOL(honeypot);
diff --git a/arch/um/kernel/tt/process_kern.c b/arch/um/kernel/tt/process_kern.c
index df810ca..776310f 100644
--- a/arch/um/kernel/tt/process_kern.c
+++ b/arch/um/kernel/tt/process_kern.c
@@ -32,10 +32,6 @@ void *switch_to_tt(void *prev, void *next, void *last)
 	unsigned long flags;
 	int err, vtalrm, alrm, prof, cpu;
 	char c;
-	/* jailing and SMP are incompatible, so this doesn't need to be 
-	 * made per-cpu 
-	 */
-	static int reading;
 
 	from = prev;
 	to = next;
@@ -59,13 +55,11 @@ void *switch_to_tt(void *prev, void *next, void *last)
 	c = 0;
 	set_current(to);
 
-	reading = 0;
 	err = os_write_file(to->thread.mode.tt.switch_pipe[1], &c, sizeof(c));
 	if(err != sizeof(c))
 		panic("write of switch_pipe failed, err = %d", -err);
 
-	reading = 1;
-        if(from->thread.mode.tt.switch_pipe[0] == -1)
+	if(from->thread.mode.tt.switch_pipe[0] == -1)
 		os_kill_process(os_getpid(), 0);
 
 	err = os_read_file(from->thread.mode.tt.switch_pipe[0], &c, sizeof(c));
diff --git a/arch/um/kernel/um_arch.c b/arch/um/kernel/um_arch.c
index 4d10ec3..4184271 100644
--- a/arch/um/kernel/um_arch.c
+++ b/arch/um/kernel/um_arch.c
@@ -111,12 +111,6 @@ struct seq_operations cpuinfo_op = {
 	.show	= show_cpuinfo,
 };
 
-pte_t * __bad_pagetable(void)
-{
-	panic("Someone should implement __bad_pagetable");
-	return(NULL);
-}
-
 /* Set in linux_main */
 unsigned long host_task_size;
 unsigned long task_size;
diff --git a/arch/um/kernel/uml.lds.S b/arch/um/kernel/uml.lds.S
index 76eadb3..dd53555 100644
--- a/arch/um/kernel/uml.lds.S
+++ b/arch/um/kernel/uml.lds.S
@@ -73,6 +73,8 @@ SECTIONS
 
   .got           : { *(.got.plt) *(.got) }
   .dynamic       : { *(.dynamic) }
+  .tdata	  : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
+  .tbss		  : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
   /* We want the small data sections together, so single-instruction offsets
      can access them all, and initialized data all before uninitialized, so
      we can shorten the on-disk segment size.  */
diff --git a/arch/um/sys-i386/Makefile b/arch/um/sys-i386/Makefile
index fcd67c3..4351e56 100644
--- a/arch/um/sys-i386/Makefile
+++ b/arch/um/sys-i386/Makefile
@@ -9,11 +9,11 @@ USER_OBJS := bugs.o ptrace_user.o sigcontext.o fault.o
 
 SYMLINKS = bitops.c semaphore.c highmem.c module.c
 
+include arch/um/scripts/Makefile.rules
+
 bitops.c-dir = lib
 semaphore.c-dir = kernel
 highmem.c-dir = mm
 module.c-dir = kernel
 
 subdir- := util
-
-include arch/um/scripts/Makefile.rules
diff --git a/arch/um/sys-i386/delay.c b/arch/um/sys-i386/delay.c
index e9892ee..2c11b97 100644
--- a/arch/um/sys-i386/delay.c
+++ b/arch/um/sys-i386/delay.c
@@ -1,5 +1,7 @@
-#include "linux/delay.h"
-#include "asm/param.h"
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <asm/param.h>
 
 void __delay(unsigned long time)
 {
@@ -20,13 +22,19 @@ void __udelay(unsigned long usecs)
 	int i, n;
 
 	n = (loops_per_jiffy * HZ * usecs) / MILLION;
-	for(i=0;i<n;i++) ;
+        for(i=0;i<n;i++)
+                cpu_relax();
 }
 
+EXPORT_SYMBOL(__udelay);
+
 void __const_udelay(unsigned long usecs)
 {
 	int i, n;
 
 	n = (loops_per_jiffy * HZ * usecs) / MILLION;
-	for(i=0;i<n;i++) ;
+        for(i=0;i<n;i++)
+                cpu_relax();
 }
+
+EXPORT_SYMBOL(__const_udelay);
diff --git a/arch/um/sys-i386/sysrq.c b/arch/um/sys-i386/sysrq.c
index 281fc7b..e3706d1 100644
--- a/arch/um/sys-i386/sysrq.c
+++ b/arch/um/sys-i386/sysrq.c
@@ -3,12 +3,15 @@
  * Licensed under the GPL
  */
 
+#include "linux/config.h"
 #include "linux/kernel.h"
 #include "linux/smp.h"
 #include "linux/sched.h"
+#include "linux/kallsyms.h"
 #include "asm/ptrace.h"
 #include "sysrq.h"
 
+/* This is declared by <linux/sched.h> */
 void show_regs(struct pt_regs *regs)
 {
         printk("\n");
@@ -31,5 +34,80 @@ void show_regs(struct pt_regs *regs)
 	       0xffff & PT_REGS_DS(regs), 
 	       0xffff & PT_REGS_ES(regs));
 
-        show_trace((unsigned long *) &regs);
+        show_trace(NULL, (unsigned long *) &regs);
 }
+
+/* Copied from i386. */
+static inline int valid_stack_ptr(struct thread_info *tinfo, void *p)
+{
+	return	p > (void *)tinfo &&
+		p < (void *)tinfo + THREAD_SIZE - 3;
+}
+
+/* Adapted from i386 (we also print the address we read from). */
+static inline unsigned long print_context_stack(struct thread_info *tinfo,
+				unsigned long *stack, unsigned long ebp)
+{
+	unsigned long addr;
+
+#ifdef CONFIG_FRAME_POINTER
+	while (valid_stack_ptr(tinfo, (void *)ebp)) {
+		addr = *(unsigned long *)(ebp + 4);
+		printk("%08lx:  [<%08lx>]", ebp + 4, addr);
+		print_symbol(" %s", addr);
+		printk("\n");
+		ebp = *(unsigned long *)ebp;
+	}
+#else
+	while (valid_stack_ptr(tinfo, stack)) {
+		addr = *stack;
+		if (__kernel_text_address(addr)) {
+			printk("%08lx:  [<%08lx>]", (unsigned long) stack, addr);
+			print_symbol(" %s", addr);
+			printk("\n");
+		}
+		stack++;
+	}
+#endif
+	return ebp;
+}
+
+void show_trace(struct task_struct* task, unsigned long * stack)
+{
+	unsigned long ebp;
+	struct thread_info *context;
+
+	/* Turn this into BUG_ON if possible. */
+	if (!stack) {
+		stack = (unsigned long*) &stack;
+		printk("show_trace: got NULL stack, implicit assumption task == current");
+		WARN_ON(1);
+	}
+
+	if (!task)
+		task = current;
+
+	if (task != current) {
+		//ebp = (unsigned long) KSTK_EBP(task);
+		/* Which one? No actual difference - just coding style.*/
+		ebp = (unsigned long) PT_REGS_EBP(&task->thread.regs);
+	} else {
+		asm ("movl %%ebp, %0" : "=r" (ebp) : );
+	}
+
+	context = (struct thread_info *)
+		((unsigned long)stack & (~(THREAD_SIZE - 1)));
+	print_context_stack(context, stack, ebp);
+
+	/*while (((long) stack & (THREAD_SIZE-1)) != 0) {
+		addr = *stack;
+		if (__kernel_text_address(addr)) {
+			printk("%08lx:	[<%08lx>]", (unsigned long) stack, addr);
+			print_symbol(" %s", addr);
+			printk("\n");
+		}
+		stack++;
+	}*/
+	printk("\n");
+}
+
diff --git a/arch/um/sys-ppc/sysrq.c b/arch/um/sys-ppc/sysrq.c
index 82d6e93..2f816f1 100644
--- a/arch/um/sys-ppc/sysrq.c
+++ b/arch/um/sys-ppc/sysrq.c
@@ -27,17 +27,5 @@ void show_regs(struct pt_regs_subarch *regs)
                 0xffff & regs->xds, 0xffff & regs->xes);
 #endif
 
-        show_trace(&regs->gpr[1]);
+        show_trace(current, &regs->gpr[1]);
 }
-
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/sys-x86_64/Makefile b/arch/um/sys-x86_64/Makefile
index 3d7da911..608466a 100644
--- a/arch/um/sys-x86_64/Makefile
+++ b/arch/um/sys-x86_64/Makefile
@@ -14,11 +14,11 @@ obj-$(CONFIG_MODULES) += module.o um_module.o
 
 USER_OBJS := ptrace_user.o sigcontext.o
 
-include arch/um/scripts/Makefile.rules
-
 SYMLINKS = bitops.c csum-copy.S csum-partial.c csum-wrappers.c memcpy.S \
 	semaphore.c thunk.S module.c
 
+include arch/um/scripts/Makefile.rules
+
 bitops.c-dir = lib
 csum-copy.S-dir = lib
 csum-partial.c-dir = lib
@@ -28,6 +28,4 @@ semaphore.c-dir = kernel
 thunk.S-dir = lib
 module.c-dir = kernel
 
-CFLAGS_csum-partial.o := -Dcsum_partial=arch_csum_partial
-
 subdir- := util
diff --git a/arch/um/sys-x86_64/delay.c b/arch/um/sys-x86_64/delay.c
index 651332a..137f444 100644
--- a/arch/um/sys-x86_64/delay.c
+++ b/arch/um/sys-x86_64/delay.c
@@ -5,40 +5,37 @@
  * Licensed under the GPL
  */
 
-#include "linux/delay.h"
-#include "asm/processor.h"
-#include "asm/param.h"
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <asm/processor.h>
+#include <asm/param.h>
 
 void __delay(unsigned long loops)
 {
 	unsigned long i;
 
-	for(i = 0; i < loops; i++) ;
+        for(i = 0; i < loops; i++)
+                cpu_relax();
 }
 
 void __udelay(unsigned long usecs)
 {
-	int i, n;
+	unsigned long i, n;
 
 	n = (loops_per_jiffy * HZ * usecs) / MILLION;
-	for(i=0;i<n;i++) ;
+        for(i=0;i<n;i++)
+                cpu_relax();
 }
 
+EXPORT_SYMBOL(__udelay);
+
 void __const_udelay(unsigned long usecs)
 {
-	int i, n;
+	unsigned long i, n;
 
 	n = (loops_per_jiffy * HZ * usecs) / MILLION;
-	for(i=0;i<n;i++) ;
+        for(i=0;i<n;i++)
+                cpu_relax();
 }
 
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
+EXPORT_SYMBOL(__const_udelay);
diff --git a/arch/um/sys-x86_64/ksyms.c b/arch/um/sys-x86_64/ksyms.c
index a27f0ee..8592738 100644
--- a/arch/um/sys-x86_64/ksyms.c
+++ b/arch/um/sys-x86_64/ksyms.c
@@ -16,5 +16,4 @@ EXPORT_SYMBOL(__up_wakeup);
 EXPORT_SYMBOL(__memcpy);
 
 /* Networking helper routines. */
-/*EXPORT_SYMBOL(csum_partial_copy_from);
-EXPORT_SYMBOL(csum_partial_copy_to);*/
+EXPORT_SYMBOL(ip_compute_csum);
diff --git a/arch/um/sys-x86_64/ptrace.c b/arch/um/sys-x86_64/ptrace.c
index b593bb2..74eee5c 100644
--- a/arch/um/sys-x86_64/ptrace.c
+++ b/arch/um/sys-x86_64/ptrace.c
@@ -5,10 +5,11 @@
  */
 
 #define __FRAME_OFFSETS
-#include "asm/ptrace.h"
-#include "linux/sched.h"
-#include "linux/errno.h"
-#include "asm/elf.h"
+#include <asm/ptrace.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <asm/uaccess.h>
+#include <asm/elf.h>
 
 /* XXX x86_64 */
 unsigned long not_ss;
diff --git a/arch/um/sys-x86_64/syscalls.c b/arch/um/sys-x86_64/syscalls.c
index dd99146..6f44f40 100644
--- a/arch/um/sys-x86_64/syscalls.c
+++ b/arch/um/sys-x86_64/syscalls.c
@@ -15,6 +15,7 @@
 #include "asm/unistd.h"
 #include "asm/prctl.h" /* XXX This should get the constants from libc */
 #include "choose-mode.h"
+#include "kern.h"
 
 asmlinkage long sys_uname64(struct new_utsname __user * name)
 {
@@ -132,23 +133,27 @@ static long arch_prctl_tt(int code, unsigned long addr)
 
 #ifdef CONFIG_MODE_SKAS
 
+/* XXX: Must also call arch_prctl in the host, beside saving the segment bases! */
 static long arch_prctl_skas(int code, unsigned long addr)
 {
 	long ret = 0;
 
 	switch(code){
-	case ARCH_SET_GS:
-		current->thread.regs.regs.skas.regs[GS_BASE / sizeof(unsigned long)] = addr;
-		break;
 	case ARCH_SET_FS:
 		current->thread.regs.regs.skas.regs[FS_BASE / sizeof(unsigned long)] = addr;
 		break;
+	case ARCH_SET_GS:
+		current->thread.regs.regs.skas.regs[GS_BASE / sizeof(unsigned long)] = addr;
+		break;
 	case ARCH_GET_FS:
-		ret = put_user(current->thread.regs.regs.skas.regs[GS / sizeof(unsigned long)], &addr);
+		ret = put_user(current->thread.regs.regs.skas.
+				regs[FS_BASE / sizeof(unsigned long)],
+				(unsigned long __user *)addr);
 	        break;
 	case ARCH_GET_GS:
-		ret = put_user(current->thread.regs.regs.skas.regs[FS / sizeof(unsigned \
-long)], &addr);
+		ret = put_user(current->thread.regs.regs.skas.
+				regs[GS_BASE / sizeof(unsigned long)],
+				(unsigned long __user *)addr);
 	        break;
 	default:
 		ret = -EINVAL;
diff --git a/arch/um/sys-x86_64/sysrq.c b/arch/um/sys-x86_64/sysrq.c
index ddf7469..d0a25af 100644
--- a/arch/um/sys-x86_64/sysrq.c
+++ b/arch/um/sys-x86_64/sysrq.c
@@ -36,14 +36,5 @@ void __show_regs(struct pt_regs * regs)
 void show_regs(struct pt_regs *regs)
 {
 	__show_regs(regs);
-	show_trace((unsigned long *) &regs);
+	show_trace(current, (unsigned long *) &regs);
 }
-
-/* Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/sys-x86_64/user-offsets.c b/arch/um/sys-x86_64/user-offsets.c
index 5e14792..513d17c 100644
--- a/arch/um/sys-x86_64/user-offsets.c
+++ b/arch/um/sys-x86_64/user-offsets.c
@@ -3,6 +3,14 @@
 #include <signal.h>
 #define __FRAME_OFFSETS
 #include <asm/ptrace.h>
+#include <asm/types.h>
+/* For some reason, x86_64 defines u64 and u32 only in <pci/types.h>, which I
+ * refuse to include here, even though they're used throughout the headers.
+ * These are used in asm/user.h, and that include can't be avoided because of
+ * the sizeof(struct user_regs_struct) below.
+ */
+typedef __u64 u64;
+typedef __u32 u32;
 #include <asm/user.h>
 
 #define DEFINE(sym, val) \
diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig
index 82cb2a3..289f448 100644
--- a/arch/x86_64/Kconfig
+++ b/arch/x86_64/Kconfig
@@ -305,6 +305,7 @@ config HPET_TIMER
 
 config X86_PM_TIMER
 	bool "PM timer"
+	depends on ACPI
 	default y
 	help
 	  Support the ACPI PM timer for time keeping. This is slow,
@@ -421,7 +422,7 @@ config PCI_DIRECT
 
 config PCI_MMCONFIG
 	bool "Support mmconfig PCI config space access"
-	depends on PCI
+	depends on PCI && ACPI
 	select ACPI_BOOT
 
 config UNORDERED_IO
diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c
index ac76843..afd87e6 100644
--- a/arch/x86_64/kernel/io_apic.c
+++ b/arch/x86_64/kernel/io_apic.c
@@ -37,11 +37,14 @@
 #include <asm/desc.h>
 #include <asm/proto.h>
 #include <asm/mach_apic.h>
+#include <asm/acpi.h>
 
 #define __apicdebuginit  __init
 
 int sis_apic_bug; /* not actually supported, dummy for compile */
 
+static int no_timer_check;
+
 static DEFINE_SPINLOCK(ioapic_lock);
 
 /*
@@ -1601,7 +1604,7 @@ static inline void check_timer(void)
 		 * Ok, does IRQ0 through the IOAPIC work?
 		 */
 		unmask_IO_APIC_irq(0);
-		if (timer_irq_works()) {
+		if (!no_timer_check && timer_irq_works()) {
 			nmi_watchdog_default();
 			if (nmi_watchdog == NMI_IO_APIC) {
 				disable_8259A_irq(0);
@@ -1671,6 +1674,13 @@ static inline void check_timer(void)
 	panic("IO-APIC + timer doesn't work! Try using the 'noapic' kernel parameter\n");
 }
 
+static int __init notimercheck(char *s)
+{
+	no_timer_check = 1;
+	return 1;
+}
+__setup("no_timer_check", notimercheck);
+
 /*
  *
  * IRQ's that are handled by the PIC in the MPS IOAPIC case.
diff --git a/arch/x86_64/kernel/mpparse.c b/arch/x86_64/kernel/mpparse.c
index f86d9db..61a63be 100644
--- a/arch/x86_64/kernel/mpparse.c
+++ b/arch/x86_64/kernel/mpparse.c
@@ -30,6 +30,7 @@
 #include <asm/pgalloc.h>
 #include <asm/io_apic.h>
 #include <asm/proto.h>
+#include <asm/acpi.h>
 
 /* Have we found an MP table */
 int smp_found_config;
diff --git a/arch/x86_64/kernel/ptrace.c b/arch/x86_64/kernel/ptrace.c
index 60dc9b9..525f6a1 100644
--- a/arch/x86_64/kernel/ptrace.c
+++ b/arch/x86_64/kernel/ptrace.c
@@ -380,7 +380,7 @@ asmlinkage long sys_ptrace(long request, long pid, unsigned long addr, long data
 			break;
 
 		switch (addr) { 
-		case 0 ... sizeof(struct user_regs_struct):
+		case 0 ... sizeof(struct user_regs_struct) - sizeof(long):
 			tmp = getreg(child, addr);
 			break;
 		case offsetof(struct user, u_debugreg[0]):
@@ -425,7 +425,7 @@ asmlinkage long sys_ptrace(long request, long pid, unsigned long addr, long data
 			break;
 
 		switch (addr) { 
-		case 0 ... sizeof(struct user_regs_struct): 
+		case 0 ... sizeof(struct user_regs_struct) - sizeof(long):
 			ret = putreg(child, addr, data);
 			break;
 		/* Disallows to set a breakpoint into the vsyscall */
diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c
index b9fd025..99f038ed 100644
--- a/arch/x86_64/kernel/setup.c
+++ b/arch/x86_64/kernel/setup.c
@@ -719,7 +719,6 @@ static void __init display_cacheinfo(struct cpuinfo_x86 *c)
 	}
 }
 
-#ifdef CONFIG_SMP
 /*
  * On a AMD dual core setup the lower bits of the APIC id distingush the cores.
  * Assumes number of cores is a power of two.
@@ -729,16 +728,24 @@ static void __init amd_detect_cmp(struct cpuinfo_x86 *c)
 #ifdef CONFIG_SMP
 	int cpu = smp_processor_id();
 	int node = 0;
+	unsigned bits;
 	if (c->x86_num_cores == 1)
 		return;
-	/* Fix up the APIC ID following the AMD specification. */
- 	cpu_core_id[cpu] >>= hweight32(c->x86_num_cores - 1);
+
+	bits = 0;
+	while ((1 << bits) < c->x86_num_cores)
+		bits++;
+
+	/* Low order bits define the core id (index of core in socket) */
+	cpu_core_id[cpu] = phys_proc_id[cpu] & ((1 << bits)-1);
+	/* Convert the APIC ID into the socket ID */
+	phys_proc_id[cpu] >>= bits;
 
 #ifdef CONFIG_NUMA
 	/* When an ACPI SRAT table is available use the mappings from SRAT
  	   instead. */
 	if (acpi_numa <= 0) {
-		node = cpu_core_id[cpu];
+		node = phys_proc_id[cpu];
 		if (!node_online(node))
 			node = first_node(node_online_map);
 		cpu_to_node[cpu] = node;
@@ -746,18 +753,11 @@ static void __init amd_detect_cmp(struct cpuinfo_x86 *c)
 		node = cpu_to_node[cpu];
 	}
 #endif
-	/* For now: - better than BAD_APIC_ID at least*/
-	phys_proc_id[cpu] = cpu_core_id[cpu];
 
 	printk(KERN_INFO "CPU %d(%d) -> Node %d -> Core %d\n",
 			cpu, c->x86_num_cores, node, cpu_core_id[cpu]);
 #endif
 }
-#else
-static void __init amd_detect_cmp(struct cpuinfo_x86 *c)
-{
-}
-#endif
 
 static int __init init_amd(struct cpuinfo_x86 *c)
 {
@@ -963,8 +963,7 @@ void __init early_identify_cpu(struct cpuinfo_x86 *c)
 	}
 
 #ifdef CONFIG_SMP
-	phys_proc_id[smp_processor_id()] =
-	cpu_core_id[smp_processor_id()] = (cpuid_ebx(1) >> 24) & 0xff;
+	phys_proc_id[smp_processor_id()] = (cpuid_ebx(1) >> 24) & 0xff;
 #endif
 }
 
diff --git a/arch/x86_64/kernel/signal.c b/arch/x86_64/kernel/signal.c
index d439ced..429c026 100644
--- a/arch/x86_64/kernel/signal.c
+++ b/arch/x86_64/kernel/signal.c
@@ -28,6 +28,7 @@
 #include <asm/uaccess.h>
 #include <asm/i387.h>
 #include <asm/proto.h>
+#include <asm/ia32_unistd.h>
 
 /* #define DEBUG_SIG 1 */
 
@@ -452,7 +453,9 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset)
 			regs->rip -= 2;
 		}
 		if (regs->rax == (unsigned long)-ERESTART_RESTARTBLOCK) {
-			regs->rax = __NR_restart_syscall;
+			regs->rax = test_thread_flag(TIF_IA32) ?
+					__NR_ia32_restart_syscall :
+					__NR_restart_syscall;
 			regs->rip -= 2;
 		}
 	}
diff --git a/arch/x86_64/kernel/smpboot.c b/arch/x86_64/kernel/smpboot.c
index 5abdee1..f1ec0f3 100644
--- a/arch/x86_64/kernel/smpboot.c
+++ b/arch/x86_64/kernel/smpboot.c
@@ -94,6 +94,7 @@ int smp_threads_ready;
 
 cpumask_t cpu_sibling_map[NR_CPUS] __cacheline_aligned;
 cpumask_t cpu_core_map[NR_CPUS] __cacheline_aligned;
+EXPORT_SYMBOL(cpu_core_map);
 
 /*
  * Trampoline 80x86 program as an array.
diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c
index 735b676..fb8c809 100644
--- a/arch/x86_64/kernel/time.c
+++ b/arch/x86_64/kernel/time.c
@@ -27,7 +27,9 @@
 #include <linux/bcd.h>
 #include <linux/kallsyms.h>
 #include <linux/acpi.h>
+#ifdef CONFIG_ACPI
 #include <acpi/achware.h>	/* for PM timer frequency */
+#endif
 #include <asm/8253pit.h>
 #include <asm/pgtable.h>
 #include <asm/vsyscall.h>
diff --git a/arch/x86_64/kernel/traps.c b/arch/x86_64/kernel/traps.c
index 65a37f5..3dfec8f 100644
--- a/arch/x86_64/kernel/traps.c
+++ b/arch/x86_64/kernel/traps.c
@@ -332,10 +332,12 @@ void handle_BUG(struct pt_regs *regs)
 	printk(KERN_ALERT "Kernel BUG at %.50s:%d\n", f.filename, f.line);
 } 
 
+#ifdef CONFIG_BUG
 void out_of_line_bug(void)
 { 
 	BUG(); 
 } 
+#endif
 
 static DEFINE_SPINLOCK(die_lock);
 static int die_owner = -1;
diff --git a/arch/x86_64/kernel/x8664_ksyms.c b/arch/x86_64/kernel/x8664_ksyms.c
index a43dedb..68ec030 100644
--- a/arch/x86_64/kernel/x8664_ksyms.c
+++ b/arch/x86_64/kernel/x8664_ksyms.c
@@ -193,8 +193,9 @@ EXPORT_SYMBOL(smp_num_siblings);
 extern void do_softirq_thunk(void);
 EXPORT_SYMBOL(do_softirq_thunk);
 
-void out_of_line_bug(void);
+#ifdef CONFIG_BUG
 EXPORT_SYMBOL(out_of_line_bug);
+#endif
 
 EXPORT_SYMBOL(init_level4_pgt);
 
diff --git a/arch/x86_64/mm/ioremap.c b/arch/x86_64/mm/ioremap.c
index c6fb0cb..58aac23 100644
--- a/arch/x86_64/mm/ioremap.c
+++ b/arch/x86_64/mm/ioremap.c
@@ -133,7 +133,7 @@ ioremap_change_attr(unsigned long phys_addr, unsigned long size,
 					unsigned long flags)
 {
 	int err = 0;
-	if (flags && phys_addr + size - 1 < (end_pfn_map << PAGE_SHIFT)) {
+	if (phys_addr + size - 1 < (end_pfn_map << PAGE_SHIFT)) {
 		unsigned long npages = (size + PAGE_SIZE - 1) >> PAGE_SHIFT;
 		unsigned long vaddr = (unsigned long) __va(phys_addr);
 
@@ -214,7 +214,7 @@ void __iomem * __ioremap(unsigned long phys_addr, unsigned long size, unsigned l
 		remove_vm_area((void *)(PAGE_MASK & (unsigned long) addr));
 		return NULL;
 	}
-	if (ioremap_change_attr(phys_addr, size, flags) < 0) {
+	if (flags && ioremap_change_attr(phys_addr, size, flags) < 0) {
 		area->flags &= 0xffffff;
 		vunmap(addr);
 		return NULL;
@@ -251,7 +251,7 @@ void __iomem *ioremap_nocache (unsigned long phys_addr, unsigned long size)
 
 void iounmap(volatile void __iomem *addr)
 {
-	struct vm_struct *p, **pprev;
+	struct vm_struct *p;
 
 	if (addr <= high_memory) 
 		return; 
@@ -260,24 +260,11 @@ void iounmap(volatile void __iomem *addr)
 		return;
 
 	write_lock(&vmlist_lock);
-	for (p = vmlist, pprev = &vmlist; p != NULL; pprev = &p->next, p = *pprev)
-		if (p->addr == (void *)(PAGE_MASK & (unsigned long)addr))
-			break;
-	if (!p) { 
-		printk("__iounmap: bad address %p\n", addr);
-		goto out_unlock;
-	}
-	*pprev = p->next;
-	unmap_vm_area(p);
-	if ((p->flags >> 20) &&
-		p->phys_addr + p->size - 1 < virt_to_phys(high_memory)) {
-		/* p->size includes the guard page, but cpa doesn't like that */
-		change_page_attr_addr((unsigned long)__va(p->phys_addr),
-				 p->size >> PAGE_SHIFT,
-				 PAGE_KERNEL);
-		global_flush_tlb();
-	} 
-out_unlock:
+	p = __remove_vm_area((void *)((unsigned long)addr & PAGE_MASK));
+	if (!p)
+		printk("iounmap: bad address %p\n", addr);
+	else if (p->flags >> 20)
+		ioremap_change_attr(p->phys_addr, p->size, 0);
 	write_unlock(&vmlist_lock);
 	kfree(p); 
 }