summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
authorMike Rapoport <mike@compulab.co.il>2011-04-25 01:09:07 +0300
committerTony Lindgren <tony@atomide.com>2011-05-03 02:53:37 -0700
commit9a3f39ff36e11ea6b6c8b5f90337a864cb7e81f6 (patch)
treebdce8353ab8670fa603d5ace590c2a467df3537d /arch
parentfbd8071c188e3053fb318d78214e54d4615d93f2 (diff)
downloadop-kernel-dev-9a3f39ff36e11ea6b6c8b5f90337a864cb7e81f6.zip
op-kernel-dev-9a3f39ff36e11ea6b6c8b5f90337a864cb7e81f6.tar.gz
omap: move detection of NAND CS to common-board-devices
and reduce amount of copy/paste Signed-off-by: Mike Rapoport <mike@compulab.co.il> CC: Oleg Drokin <green@linuxhacker.ru> Signed-off-by: Tony Lindgren <tony@atomide.com>
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/mach-omap2/board-devkit8000.c43
-rw-r--r--arch/arm/mach-omap2/board-omap3beagle.c45
-rw-r--r--arch/arm/mach-omap2/board-omap3touchbook.c45
-rw-r--r--arch/arm/mach-omap2/board-overo.c42
-rw-r--r--arch/arm/mach-omap2/common-board-devices.c57
-rw-r--r--arch/arm/mach-omap2/common-board-devices.h11
6 files changed, 67 insertions, 176 deletions
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 983f44b..e7dc057 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -97,13 +97,6 @@ static struct mtd_partition devkit8000_nand_partitions[] = {
},
};
-static struct omap_nand_platform_data devkit8000_nand_data = {
- .options = NAND_BUSWIDTH_16,
- .parts = devkit8000_nand_partitions,
- .nr_parts = ARRAY_SIZE(devkit8000_nand_partitions),
- .dma_channel = -1, /* disable DMA in OMAP NAND driver */
-};
-
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
@@ -516,39 +509,6 @@ static struct platform_device *devkit8000_devices[] __initdata = {
&omap_dm9000_dev,
};
-static void __init devkit8000_flash_init(void)
-{
- u8 cs = 0;
- u8 nandcs = GPMC_CS_NUM + 1;
-
- /* find out the chip-select on which NAND exists */
- while (cs < GPMC_CS_NUM) {
- u32 ret = 0;
- ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
-
- if ((ret & 0xC00) == 0x800) {
- printk(KERN_INFO "Found NAND on CS%d\n", cs);
- if (nandcs > GPMC_CS_NUM)
- nandcs = cs;
- }
- cs++;
- }
-
- if (nandcs > GPMC_CS_NUM) {
- printk(KERN_INFO "NAND: Unable to find configuration "
- "in GPMC\n ");
- return;
- }
-
- if (nandcs < GPMC_CS_NUM) {
- devkit8000_nand_data.cs = nandcs;
-
- printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
- if (gpmc_nand_init(&devkit8000_nand_data) < 0)
- printk(KERN_ERR "Unable to register NAND device\n");
- }
-}
-
static struct omap_musb_board_data musb_board_data = {
.interface_type = MUSB_INTERFACE_ULPI,
.mode = MUSB_OTG,
@@ -740,7 +700,8 @@ static void __init devkit8000_init(void)
usb_musb_init(&musb_board_data);
usbhs_init(&usbhs_bdata);
- devkit8000_flash_init();
+ omap_nand_flash_init(NAND_BUSWIDTH_16, devkit8000_nand_partitions,
+ ARRAY_SIZE(devkit8000_nand_partitions));
/* Ensure SDRC pins are mux'd for self-refresh */
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 13a1664..ce3bc2d 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -174,15 +174,6 @@ static struct mtd_partition omap3beagle_nand_partitions[] = {
},
};
-static struct omap_nand_platform_data omap3beagle_nand_data = {
- .options = NAND_BUSWIDTH_16,
- .parts = omap3beagle_nand_partitions,
- .nr_parts = ARRAY_SIZE(omap3beagle_nand_partitions),
- .dma_channel = -1, /* disable DMA in OMAP NAND driver */
- .nand_setup = NULL,
- .dev_ready = NULL,
-};
-
/* DSS */
static int beagle_enable_dvi(struct omap_dss_device *dssdev)
@@ -542,39 +533,6 @@ static struct platform_device *omap3_beagle_devices[] __initdata = {
&keys_gpio,
};
-static void __init omap3beagle_flash_init(void)
-{
- u8 cs = 0;
- u8 nandcs = GPMC_CS_NUM + 1;
-
- /* find out the chip-select on which NAND exists */
- while (cs < GPMC_CS_NUM) {
- u32 ret = 0;
- ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
-
- if ((ret & 0xC00) == 0x800) {
- printk(KERN_INFO "Found NAND on CS%d\n", cs);
- if (nandcs > GPMC_CS_NUM)
- nandcs = cs;
- }
- cs++;
- }
-
- if (nandcs > GPMC_CS_NUM) {
- printk(KERN_INFO "NAND: Unable to find configuration "
- "in GPMC\n ");
- return;
- }
-
- if (nandcs < GPMC_CS_NUM) {
- omap3beagle_nand_data.cs = nandcs;
-
- printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
- if (gpmc_nand_init(&omap3beagle_nand_data) < 0)
- printk(KERN_ERR "Unable to register NAND device\n");
- }
-}
-
static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
@@ -662,7 +620,8 @@ static void __init omap3_beagle_init(void)
usb_musb_init(&musb_board_data);
usbhs_init(&usbhs_bdata);
- omap3beagle_flash_init();
+ omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions,
+ ARRAY_SIZE(omap3beagle_nand_partitions));
/* Ensure SDRC pins are mux'd for self-refresh */
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 0a9b329..d770802 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -96,15 +96,6 @@ static struct mtd_partition omap3touchbook_nand_partitions[] = {
},
};
-static struct omap_nand_platform_data omap3touchbook_nand_data = {
- .options = NAND_BUSWIDTH_16,
- .parts = omap3touchbook_nand_partitions,
- .nr_parts = ARRAY_SIZE(omap3touchbook_nand_partitions),
- .dma_channel = -1, /* disable DMA in OMAP NAND driver */
- .nand_setup = NULL,
- .dev_ready = NULL,
-};
-
#include "sdram-micron-mt46h32m32lf-6.h"
static struct omap2_hsmmc_info mmc[] = {
@@ -396,39 +387,6 @@ static struct platform_device *omap3_touchbook_devices[] __initdata = {
&keys_gpio,
};
-static void __init omap3touchbook_flash_init(void)
-{
- u8 cs = 0;
- u8 nandcs = GPMC_CS_NUM + 1;
-
- /* find out the chip-select on which NAND exists */
- while (cs < GPMC_CS_NUM) {
- u32 ret = 0;
- ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
-
- if ((ret & 0xC00) == 0x800) {
- printk(KERN_INFO "Found NAND on CS%d\n", cs);
- if (nandcs > GPMC_CS_NUM)
- nandcs = cs;
- }
- cs++;
- }
-
- if (nandcs > GPMC_CS_NUM) {
- printk(KERN_INFO "NAND: Unable to find configuration "
- "in GPMC\n ");
- return;
- }
-
- if (nandcs < GPMC_CS_NUM) {
- omap3touchbook_nand_data.cs = nandcs;
-
- printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
- if (gpmc_nand_init(&omap3touchbook_nand_data) < 0)
- printk(KERN_ERR "Unable to register NAND device\n");
- }
-}
-
static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
@@ -491,7 +449,8 @@ static void __init omap3_touchbook_init(void)
omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata);
usb_musb_init(&musb_board_data);
usbhs_init(&usbhs_bdata);
- omap3touchbook_flash_init();
+ omap_nand_flash_init(NAND_BUSWIDTH_16, omap3touchbook_nand_partitions,
+ ARRAY_SIZE(omap3touchbook_nand_partitions));
/* Ensure SDRC pins are mux'd for self-refresh */
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 809d3944..7ad2d7f 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -304,45 +304,6 @@ static struct mtd_partition overo_nand_partitions[] = {
},
};
-static struct omap_nand_platform_data overo_nand_data = {
- .parts = overo_nand_partitions,
- .nr_parts = ARRAY_SIZE(overo_nand_partitions),
- .dma_channel = -1, /* disable DMA in OMAP NAND driver */
-};
-
-static void __init overo_flash_init(void)
-{
- u8 cs = 0;
- u8 nandcs = GPMC_CS_NUM + 1;
-
- /* find out the chip-select on which NAND exists */
- while (cs < GPMC_CS_NUM) {
- u32 ret = 0;
- ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
-
- if ((ret & 0xC00) == 0x800) {
- printk(KERN_INFO "Found NAND on CS%d\n", cs);
- if (nandcs > GPMC_CS_NUM)
- nandcs = cs;
- }
- cs++;
- }
-
- if (nandcs > GPMC_CS_NUM) {
- printk(KERN_INFO "NAND: Unable to find configuration "
- "in GPMC\n ");
- return;
- }
-
- if (nandcs < GPMC_CS_NUM) {
- overo_nand_data.cs = nandcs;
-
- printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
- if (gpmc_nand_init(&overo_nand_data) < 0)
- printk(KERN_ERR "Unable to register NAND device\n");
- }
-}
-
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
@@ -604,7 +565,8 @@ static void __init overo_init(void)
overo_i2c_init();
omap_display_init(&overo_dss_data);
omap_serial_init();
- overo_flash_init();
+ omap_nand_flash_init(0, overo_nand_partitions,
+ ARRAY_SIZE(overo_nand_partitions));
usb_musb_init(&musb_board_data);
usbhs_init(&usbhs_bdata);
overo_spi_init();
diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c
index cea31dd..e94903b 100644
--- a/arch/arm/mach-omap2/common-board-devices.c
+++ b/arch/arm/mach-omap2/common-board-devices.c
@@ -29,6 +29,7 @@
#include <plat/i2c.h>
#include <plat/mcspi.h>
+#include <plat/nand.h>
#include "common-board-devices.h"
@@ -49,6 +50,8 @@ void __init omap_pmic_init(int bus, u32 clkrate,
omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1);
}
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
+ defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
static struct omap2_mcspi_device_config ads7846_mcspi_config = {
.turbo_mode = 0,
.single_channel = 1, /* 0: slave, 1: master */
@@ -104,3 +107,57 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
spi_register_board_info(&ads7846_spi_board_info, 1);
}
+#else
+void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
+ struct ads7846_platform_data *board_pdata)
+{
+}
+#endif
+
+#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
+static struct omap_nand_platform_data nand_data = {
+ .dma_channel = -1, /* disable DMA in OMAP NAND driver */
+};
+
+void __init omap_nand_flash_init(int options, struct mtd_partition *parts,
+ int nr_parts)
+{
+ u8 cs = 0;
+ u8 nandcs = GPMC_CS_NUM + 1;
+
+ /* find out the chip-select on which NAND exists */
+ while (cs < GPMC_CS_NUM) {
+ u32 ret = 0;
+ ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
+
+ if ((ret & 0xC00) == 0x800) {
+ printk(KERN_INFO "Found NAND on CS%d\n", cs);
+ if (nandcs > GPMC_CS_NUM)
+ nandcs = cs;
+ }
+ cs++;
+ }
+
+ if (nandcs > GPMC_CS_NUM) {
+ printk(KERN_INFO "NAND: Unable to find configuration "
+ "in GPMC\n ");
+ return;
+ }
+
+ if (nandcs < GPMC_CS_NUM) {
+ nand_data.cs = nandcs;
+ nand_data.parts = parts;
+ nand_data.nr_parts = nr_parts;
+ nand_data.options = options;
+
+ printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
+ if (gpmc_nand_init(&nand_data) < 0)
+ printk(KERN_ERR "Unable to register NAND device\n");
+ }
+}
+#else
+void __init omap_nand_flash_init(int options, struct mtd_partition *parts,
+ int nr_parts)
+{
+}
+#endif
diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h
index 0ec3e07..eb80b3b 100644
--- a/arch/arm/mach-omap2/common-board-devices.h
+++ b/arch/arm/mach-omap2/common-board-devices.h
@@ -2,6 +2,7 @@
#define __OMAP_COMMON_BOARD_DEVICES__
struct twl4030_platform_data;
+struct mtd_partition;
void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq,
struct twl4030_platform_data *pmic_data);
@@ -25,18 +26,10 @@ static inline void omap4_pmic_init(const char *pmic_type,
omap_pmic_init(1, 400, pmic_type, OMAP44XX_IRQ_SYS_1N, pmic_data);
}
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
- defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
struct ads7846_platform_data;
void omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
struct ads7846_platform_data *board_pdata);
-#else
-static inline void omap_ads7846_init(int bus_num,
- int gpio_pendown, int gpio_debounce,
- struct ads7846_platform_data *board_data)
-{
-}
-#endif
+void omap_nand_flash_init(int opts, struct mtd_partition *parts, int n_parts);
#endif /* __OMAP_COMMON_BOARD_DEVICES__ */
OpenPOWER on IntegriCloud