diff options
author | Linus Walleij <linus.walleij@linaro.org> | 2014-09-11 18:56:33 +0200 |
---|---|---|
committer | Linus Walleij <linus.walleij@linaro.org> | 2014-10-31 21:44:29 +0100 |
commit | 6bd5e87017bf62a035e123f2334318afa032bcb7 (patch) | |
tree | 506592fb64d706266347c87f36ef1eadd7ee9cf2 /arch | |
parent | f114040e3ea6e07372334ade75d1ee0775c355e1 (diff) | |
download | op-kernel-dev-6bd5e87017bf62a035e123f2334318afa032bcb7.zip op-kernel-dev-6bd5e87017bf62a035e123f2334318afa032bcb7.tar.gz |
ARM: nomadik: move MMC/SD card detect GPIO to board DTS
This pushes the setting of the card detect GPIO pin down into
the top-level file for the board, since it is not a property of
the ASIC (which this DTSI is about) but a property of the board
design.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'arch')
-rw-r--r-- | arch/arm/boot/dts/ste-nomadik-s8815.dts | 7 | ||||
-rw-r--r-- | arch/arm/boot/dts/ste-nomadik-stn8815.dtsi | 1 |
2 files changed, 7 insertions, 1 deletions
diff --git a/arch/arm/boot/dts/ste-nomadik-s8815.dts b/arch/arm/boot/dts/ste-nomadik-s8815.dts index 90d8b6c..c795ee8 100644 --- a/arch/arm/boot/dts/ste-nomadik-s8815.dts +++ b/arch/arm/boot/dts/ste-nomadik-s8815.dts @@ -65,6 +65,13 @@ }; }; + /* Configure card detect for the uSD slot */ + amba { + mmcsd: sdi@101f6000 { + cd-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; + }; + }; + /* Custom board node with GPIO pins to active etc */ usb-s8815 { /* This will bias the MMC/SD card detect line */ diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi index dbcf521..35c79eb 100644 --- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -844,7 +844,6 @@ bus-width = <4>; cap-mmc-highspeed; cap-sd-highspeed; - cd-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&mmcsd_default_mux>, <&mmcsd_default_mode>; vmmc-supply = <&vmmc_regulator>; |