Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

From Tony Lindgren:

Note that this also contains a set of fixes that are not regressions
or oopses to properly deal with the smsc911x regulator issue.

Basically the regulators must be per board file as the regulators
can also come from drivers, such as twl4030. So it's best to dumb
down gpmc-smsc911x.c to not even care about the regulators.

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP: fix section mismatches in usb-host.c
  ARM: OMAP2+: Fix omap2+ build error
  ARM: OMAP2+: smsc911x: Add fixed board regulators
  ARM: OMAP2+: smsc911x: Remove regulator support from gmpc-smsc911x
  ARM: OMAP2+: smsc911x: Remove unused rate calculation
  ARM: OMAP2+ smsc911x: Fix possible stale smsc911x flags
  ARM: OMAP2+: smsc911x: Remove odd gpmc_cfg/board_data redirection
  ARM: OMAP3+: fix oops triggered in omap_prcm_register_chain_handler(v1)
  ARM: OMAP2+: OPP: allow OPP enumeration to continue if device is not present
  arm: omap3: pm34xx.c: Replace printk() with appropriate pr_*()
  arm: omap3: pm34xx.c: Fix omap3_pm_init() error out paths
  ARM: OMAP4: Workaround the OCP synchronisation issue with 32K synctimer.
  ARM: OMAP4: prm: fix interrupt register offsets
  ARM: OMAP: hwmod: Use sysc_fields->srst_shift and get rid of hardcoded SYSC_TYPE2_SOFTRESET_MASK

17 files changed, 122 insertions, 122 deletions

diff --git a/arch/arm/include/asm/barrier.h b/arch/arm/include/asm/barrier.h
index 44f4a09..0511238 100644
--- a/arch/arm/include/asm/barrier.h
+++ b/arch/arm/include/asm/barrier.h
@@ -2,6 +2,7 @@
 #define __ASM_BARRIER_H
 
 #ifndef __ASSEMBLY__
+#include <asm/outercache.h>
 
 #define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t");
 
@@ -39,7 +40,6 @@
 #ifdef CONFIG_ARCH_HAS_BARRIERS
 #include <mach/barriers.h>
 #elif defined(CONFIG_ARM_DMA_MEM_BUFFERABLE) || defined(CONFIG_SMP)
-#include <asm/outercache.h>
 #define mb()		do { dsb(); outer_sync(); } while (0)
 #define rmb()		dsb()
 #define wmb()		mb()
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 41b0a2f..909a8b9 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -26,6 +26,7 @@
 
 #include <linux/i2c/at24.h>
 #include <linux/i2c/twl.h>
+#include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 #include <linux/mmc/host.h>
 
@@ -81,8 +82,23 @@ static struct omap_smsc911x_platform_data sb_t35_smsc911x_cfg = {
 	.flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
 };
 
+static struct regulator_consumer_supply cm_t35_smsc911x_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+
+static struct regulator_consumer_supply sb_t35_smsc911x_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x.1"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x.1"),
+};
+
 static void __init cm_t35_init_ethernet(void)
 {
+	regulator_register_fixed(0, cm_t35_smsc911x_supplies,
+				 ARRAY_SIZE(cm_t35_smsc911x_supplies));
+	regulator_register_fixed(1, sb_t35_smsc911x_supplies,
+				 ARRAY_SIZE(sb_t35_smsc911x_supplies));
+
 	gpmc_smsc911x_init(&cm_t35_smsc911x_cfg);
 	gpmc_smsc911x_init(&sb_t35_smsc911x_cfg);
 }
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index e558800..930c0d3 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -634,8 +634,14 @@ static void __init igep_wlan_bt_init(void)
 static inline void __init igep_wlan_bt_init(void) { }
 #endif
 
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+
 static void __init igep_init(void)
 {
+	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 
 	/* Get IGEP2 hardware revision */
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index d50a562a..1b60495 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -22,6 +22,7 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/spi/spi.h>
+#include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 #include <linux/i2c/twl.h>
 #include <linux/io.h>
@@ -410,8 +411,14 @@ static struct mtd_partition ldp_nand_partitions[] = {
 
 };
 
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+
 static void __init omap_ldp_init(void)
 {
+	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	ldp_init_smsc911x();
 	omap_i2c_init();
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 4c90f07..49df127 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -114,15 +114,6 @@ static struct omap_smsc911x_platform_data smsc911x_cfg = {
 
 static inline void __init omap3evm_init_smsc911x(void)
 {
-	struct clk *l3ck;
-	unsigned int rate;
-
-	l3ck = clk_get(NULL, "l3_ck");
-	if (IS_ERR(l3ck))
-		rate = 100000000;
-	else
-		rate = clk_get_rate(l3ck);
-
 	/* Configure ethernet controller reset gpio */
 	if (cpu_is_omap3430()) {
 		if (get_omap3_evm_rev() == OMAP3EVM_BOARD_GEN_1)
@@ -632,9 +623,15 @@ static void __init omap3_evm_wl12xx_init(void)
 #endif
 }
 
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+
 static void __init omap3_evm_init(void)
 {
 	omap3_evm_get_revision();
+	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
 
 	if (cpu_is_omap3630())
 		omap3_mux_init(omap36x_board_mux, OMAP_PACKAGE_CBB);
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
index 4a7d8c8..9b3c141 100644
--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -23,6 +23,7 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 
+#include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 
 #include <linux/i2c/twl.h>
@@ -188,8 +189,14 @@ static struct omap_board_mux board_mux[] __initdata = {
 };
 #endif
 
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+
 static void __init omap3logic_init(void)
 {
+	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap3torpedo_fix_pbias_voltage();
 	omap3logic_i2c_init();
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 6410043..4dffc95 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -24,6 +24,7 @@
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
 
+#include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 #include <linux/i2c/twl.h>
 #include <linux/mmc/host.h>
@@ -72,15 +73,6 @@ static struct omap_smsc911x_platform_data smsc911x_cfg = {
 
 static inline void __init omap3stalker_init_eth(void)
 {
-	struct clk *l3ck;
-	unsigned int rate;
-
-	l3ck = clk_get(NULL, "l3_ck");
-	if (IS_ERR(l3ck))
-		rate = 100000000;
-	else
-		rate = clk_get_rate(l3ck);
-
 	omap_mux_init_gpio(19, OMAP_PIN_INPUT_PULLUP);
 	gpmc_smsc911x_init(&smsc911x_cfg);
 }
@@ -419,8 +411,14 @@ static struct omap_board_mux board_mux[] __initdata = {
 };
 #endif
 
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+
 static void __init omap3_stalker_init(void)
 {
+	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
 	omap_board_config = omap3_stalker_config;
 	omap_board_config_size = ARRAY_SIZE(omap3_stalker_config);
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 668533e..33aa391 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -498,10 +498,18 @@ static struct gpio overo_bt_gpios[] __initdata = {
 	{ OVERO_GPIO_BT_NRESET, GPIOF_OUT_INIT_HIGH,	"lcd bl enable" },
 };
 
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+	REGULATOR_SUPPLY("vddvario", "smsc911x.1"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x.1"),
+};
+
 static void __init overo_init(void)
 {
 	int ret;
 
+	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap_hsmmc_init(mmc);
 	overo_i2c_init();
diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c
index 1e8540e..f64f441 100644
--- a/arch/arm/mach-omap2/board-zoom-debugboard.c
+++ b/arch/arm/mach-omap2/board-zoom-debugboard.c
@@ -14,6 +14,9 @@
 #include <linux/smsc911x.h>
 #include <linux/interrupt.h>
 
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+
 #include <plat/gpmc.h>
 #include <plat/gpmc-smsc911x.h>
 
@@ -117,11 +120,17 @@ static struct platform_device *zoom_devices[] __initdata = {
 	&zoom_debugboard_serial_device,
 };
 
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+
 int __init zoom_debugboard_init(void)
 {
 	if (!omap_zoom_debugboard_detect())
 		return 0;
 
+	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
 	zoom_init_smsc911x();
 	zoom_init_quaduart();
 	return platform_add_devices(zoom_devices, ARRAY_SIZE(zoom_devices));
diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c
index 5e5880d..b6c77be 100644
--- a/arch/arm/mach-omap2/gpmc-smsc911x.c
+++ b/arch/arm/mach-omap2/gpmc-smsc911x.c
@@ -19,15 +19,11 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/smsc911x.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
 
 #include <plat/board.h>
 #include <plat/gpmc.h>
 #include <plat/gpmc-smsc911x.h>
 
-static struct omap_smsc911x_platform_data *gpmc_cfg;
-
 static struct resource gpmc_smsc911x_resources[] = {
 	[0] = {
 		.flags		= IORESOURCE_MEM,
@@ -41,51 +37,6 @@ static struct smsc911x_platform_config gpmc_smsc911x_config = {
 	.phy_interface	= PHY_INTERFACE_MODE_MII,
 	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
 	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
-	.flags		= SMSC911X_USE_16BIT,
-};
-
-static struct regulator_consumer_supply gpmc_smsc911x_supply[] = {
-	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
-};
-
-/* Generic regulator definition to satisfy smsc911x */
-static struct regulator_init_data gpmc_smsc911x_reg_init_data = {
-	.constraints = {
-		.min_uV			= 3300000,
-		.max_uV			= 3300000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(gpmc_smsc911x_supply),
-	.consumer_supplies	= gpmc_smsc911x_supply,
-};
-
-static struct fixed_voltage_config gpmc_smsc911x_fixed_reg_data = {
-	.supply_name		= "gpmc_smsc911x",
-	.microvolts		= 3300000,
-	.gpio			= -EINVAL,
-	.startup_delay		= 0,
-	.enable_high		= 0,
-	.enabled_at_boot	= 1,
-	.init_data		= &gpmc_smsc911x_reg_init_data,
-};
-
-/*
- * Platform device id of 42 is a temporary fix to avoid conflicts
- * with other reg-fixed-voltage devices. The real fix should
- * involve the driver core providing a way of dynamically
- * assigning a unique id on registration for platform devices
- * in the same name space.
- */
-static struct platform_device gpmc_smsc911x_regulator = {
-	.name		= "reg-fixed-voltage",
-	.id		= 42,
-	.dev = {
-		.platform_data	= &gpmc_smsc911x_fixed_reg_data,
-	},
 };
 
 /*
@@ -93,23 +44,12 @@ static struct platform_device gpmc_smsc911x_regulator = {
  * assume that pin multiplexing is done in the board-*.c file,
  * or in the bootloader.
  */
-void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data)
+void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *gpmc_cfg)
 {
 	struct platform_device *pdev;
 	unsigned long cs_mem_base;
 	int ret;
 
-	gpmc_cfg = board_data;
-
-	if (!gpmc_cfg->id) {
-		ret = platform_device_register(&gpmc_smsc911x_regulator);
-		if (ret < 0) {
-			pr_err("Unable to register smsc911x regulators: %d\n",
-			       ret);
-			return;
-		}
-	}
-
 	if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) {
 		pr_err("Failed to request GPMC mem region\n");
 		return;
@@ -139,8 +79,7 @@ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data)
 		gpio_set_value(gpmc_cfg->gpio_reset, 1);
 	}
 
-	if (gpmc_cfg->flags)
-		gpmc_smsc911x_config.flags = gpmc_cfg->flags;
+	gpmc_smsc911x_config.flags = gpmc_cfg->flags ? : SMSC911X_USE_16BIT;
 
 	pdev = platform_device_register_resndata(NULL, "smsc911x", gpmc_cfg->id,
 		 gpmc_smsc911x_resources, ARRAY_SIZE(gpmc_smsc911x_resources),
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index eba6cd3..f9b9bb9 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1395,7 +1395,7 @@ static int _read_hardreset(struct omap_hwmod *oh, const char *name)
  */
 static int _ocp_softreset(struct omap_hwmod *oh)
 {
-	u32 v;
+	u32 v, softrst_mask;
 	int c = 0;
 	int ret = 0;
 
@@ -1427,11 +1427,13 @@ static int _ocp_softreset(struct omap_hwmod *oh)
 						    oh->class->sysc->syss_offs)
 				   & SYSS_RESETDONE_MASK),
 				  MAX_MODULE_SOFTRESET_WAIT, c);
-	else if (oh->class->sysc->sysc_flags & SYSC_HAS_RESET_STATUS)
+	else if (oh->class->sysc->sysc_flags & SYSC_HAS_RESET_STATUS) {
+		softrst_mask = (0x1 << oh->class->sysc->sysc_fields->srst_shift);
 		omap_test_timeout(!(omap_hwmod_read(oh,
 						     oh->class->sysc->sysc_offs)
-				   & SYSC_TYPE2_SOFTRESET_MASK),
+				   & softrst_mask),
 				  MAX_MODULE_SOFTRESET_WAIT, c);
+	}
 
 	if (c == MAX_MODULE_SOFTRESET_WAIT)
 		pr_warning("omap_hwmod: %s: softreset failed (waited %d usec)\n",
diff --git a/arch/arm/mach-omap2/opp.c b/arch/arm/mach-omap2/opp.c
index 9262a6b..de6d464 100644
--- a/arch/arm/mach-omap2/opp.c
+++ b/arch/arm/mach-omap2/opp.c
@@ -64,10 +64,10 @@ int __init omap_init_opp_table(struct omap_opp_def *opp_def,
 		}
 		oh = omap_hwmod_lookup(opp_def->hwmod_name);
 		if (!oh || !oh->od) {
-			pr_warn("%s: no hwmod or odev for %s, [%d] "
+			pr_debug("%s: no hwmod or odev for %s, [%d] "
 				"cannot add OPPs.\n", __func__,
 				opp_def->hwmod_name, i);
-			return -EINVAL;
+			continue;
 		}
 		dev = &oh->od->pdev->dev;
 
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 238defc..703bd10 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -153,8 +153,7 @@ static void omap3_save_secure_ram_context(void)
 		pwrdm_set_next_pwrst(mpu_pwrdm, mpu_next_state);
 		/* Following is for error tracking, it should not happen */
 		if (ret) {
-			printk(KERN_ERR "save_secure_sram() returns %08x\n",
-				ret);
+			pr_err("save_secure_sram() returns %08x\n", ret);
 			while (1)
 				;
 		}
@@ -289,7 +288,7 @@ void omap_sram_idle(void)
 		break;
 	default:
 		/* Invalid state */
-		printk(KERN_ERR "Invalid mpu state in sram_idle\n");
+		pr_err("Invalid mpu state in sram_idle\n");
 		return;
 	}
 
@@ -439,18 +438,17 @@ restore:
 	list_for_each_entry(pwrst, &pwrst_list, node) {
 		state = pwrdm_read_prev_pwrst(pwrst->pwrdm);
 		if (state > pwrst->next_state) {
-			printk(KERN_INFO "Powerdomain (%s) didn't enter "
-			       "target state %d\n",
+			pr_info("Powerdomain (%s) didn't enter "
+				"target state %d\n",
 			       pwrst->pwrdm->name, pwrst->next_state);
 			ret = -1;
 		}
 		omap_set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
 	}
 	if (ret)
-		printk(KERN_ERR "Could not enter target state in pm_suspend\n");
+		pr_err("Could not enter target state in pm_suspend\n");
 	else
-		printk(KERN_INFO "Successfully put all powerdomains "
-		       "to target state\n");
+		pr_info("Successfully put all powerdomains to target state\n");
 
 	return ret;
 }
@@ -734,21 +732,22 @@ static int __init omap3_pm_init(void)
 
 	if (ret) {
 		pr_err("pm: Failed to request pm_io irq\n");
-		goto err1;
+		goto err2;
 	}
 
 	ret = pwrdm_for_each(pwrdms_setup, NULL);
 	if (ret) {
-		printk(KERN_ERR "Failed to setup powerdomains\n");
-		goto err2;
+		pr_err("Failed to setup powerdomains\n");
+		goto err3;
 	}
 
 	(void) clkdm_for_each(omap_pm_clkdms_setup, NULL);
 
 	mpu_pwrdm = pwrdm_lookup("mpu_pwrdm");
 	if (mpu_pwrdm == NULL) {
-		printk(KERN_ERR "Failed to get mpu_pwrdm\n");
-		goto err2;
+		pr_err("Failed to get mpu_pwrdm\n");
+		ret = -EINVAL;
+		goto err3;
 	}
 
 	neon_pwrdm = pwrdm_lookup("neon_pwrdm");
@@ -781,8 +780,8 @@ static int __init omap3_pm_init(void)
 		omap3_secure_ram_storage =
 			kmalloc(0x803F, GFP_KERNEL);
 		if (!omap3_secure_ram_storage)
-			printk(KERN_ERR "Memory allocation failed when"
-					"allocating for secure sram context\n");
+			pr_err("Memory allocation failed when "
+			       "allocating for secure sram context\n");
 
 		local_irq_disable();
 		local_fiq_disable();
@@ -796,14 +795,17 @@ static int __init omap3_pm_init(void)
 	}
 
 	omap3_save_scratchpad_contents();
-err1:
 	return ret;
-err2:
-	free_irq(INT_34XX_PRCM_MPU_IRQ, NULL);
+
+err3:
 	list_for_each_entry_safe(pwrst, tmp, &pwrst_list, node) {
 		list_del(&pwrst->node);
 		kfree(pwrst);
 	}
+	free_irq(omap_prcm_event_to_irq("io"), omap3_pm_init);
+err2:
+	free_irq(omap_prcm_event_to_irq("wkup"), NULL);
+err1:
 	return ret;
 }
 
diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c
index 9ccaadc..8856253 100644
--- a/arch/arm/mach-omap2/pm44xx.c
+++ b/arch/arm/mach-omap2/pm44xx.c
@@ -144,7 +144,7 @@ static void omap_default_idle(void)
 static int __init omap4_pm_init(void)
 {
 	int ret;
-	struct clockdomain *emif_clkdm, *mpuss_clkdm, *l3_1_clkdm;
+	struct clockdomain *emif_clkdm, *mpuss_clkdm, *l3_1_clkdm, *l4wkup;
 	struct clockdomain *ducati_clkdm, *l3_2_clkdm, *l4_per_clkdm;
 
 	if (!cpu_is_omap44xx())
@@ -168,14 +168,19 @@ static int __init omap4_pm_init(void)
 	 * MPUSS -> L4_PER/L3_* and DUCATI -> L3_* doesn't work as
 	 * expected. The hardware recommendation is to enable static
 	 * dependencies for these to avoid system lock ups or random crashes.
+	 * The L4 wakeup depedency is added to workaround the OCP sync hardware
+	 * BUG with 32K synctimer which lead to incorrect timer value read
+	 * from the 32K counter. The BUG applies for GPTIMER1 and WDT2 which
+	 * are part of L4 wakeup clockdomain.
 	 */
 	mpuss_clkdm = clkdm_lookup("mpuss_clkdm");
 	emif_clkdm = clkdm_lookup("l3_emif_clkdm");
 	l3_1_clkdm = clkdm_lookup("l3_1_clkdm");
 	l3_2_clkdm = clkdm_lookup("l3_2_clkdm");
 	l4_per_clkdm = clkdm_lookup("l4_per_clkdm");
+	l4wkup = clkdm_lookup("l4_wkup_clkdm");
 	ducati_clkdm = clkdm_lookup("ducati_clkdm");
-	if ((!mpuss_clkdm) || (!emif_clkdm) || (!l3_1_clkdm) ||
+	if ((!mpuss_clkdm) || (!emif_clkdm) || (!l3_1_clkdm) || (!l4wkup) ||
 		(!l3_2_clkdm) || (!ducati_clkdm) || (!l4_per_clkdm))
 		goto err2;
 
@@ -183,6 +188,7 @@ static int __init omap4_pm_init(void)
 	ret |= clkdm_add_wkdep(mpuss_clkdm, l3_1_clkdm);
 	ret |= clkdm_add_wkdep(mpuss_clkdm, l3_2_clkdm);
 	ret |= clkdm_add_wkdep(mpuss_clkdm, l4_per_clkdm);
+	ret |= clkdm_add_wkdep(mpuss_clkdm, l4wkup);
 	ret |= clkdm_add_wkdep(ducati_clkdm, l3_1_clkdm);
 	ret |= clkdm_add_wkdep(ducati_clkdm, l3_2_clkdm);
 	if (ret) {
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index eac623c..f106d21 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -147,8 +147,9 @@ static inline u32 _read_pending_irq_reg(u16 irqen_offs, u16 irqst_offs)
 	u32 mask, st;
 
 	/* XXX read mask from RAM? */
-	mask = omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, irqen_offs);
-	st = omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, irqst_offs);
+	mask = omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST,
+				       irqen_offs);
+	st = omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST, irqst_offs);
 
 	return mask & st;
 }
@@ -180,7 +181,7 @@ void omap44xx_prm_read_pending_irqs(unsigned long *events)
  */
 void omap44xx_prm_ocp_barrier(void)
 {
-	omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST,
+	omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST,
 				OMAP4_REVISION_PRM_OFFSET);
 }
 
@@ -198,19 +199,19 @@ void omap44xx_prm_ocp_barrier(void)
 void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask)
 {
 	saved_mask[0] =
-		omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST,
+		omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST,
 					OMAP4_PRM_IRQSTATUS_MPU_OFFSET);
 	saved_mask[1] =
-		omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST,
+		omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST,
 					OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET);
 
-	omap4_prm_write_inst_reg(0, OMAP4430_PRM_DEVICE_INST,
+	omap4_prm_write_inst_reg(0, OMAP4430_PRM_OCP_SOCKET_INST,
 				 OMAP4_PRM_IRQENABLE_MPU_OFFSET);
-	omap4_prm_write_inst_reg(0, OMAP4430_PRM_DEVICE_INST,
+	omap4_prm_write_inst_reg(0, OMAP4430_PRM_OCP_SOCKET_INST,
 				 OMAP4_PRM_IRQENABLE_MPU_2_OFFSET);
 
 	/* OCP barrier */
-	omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST,
+	omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST,
 				OMAP4_REVISION_PRM_OFFSET);
 }
 
@@ -226,9 +227,9 @@ void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask)
  */
 void omap44xx_prm_restore_irqen(u32 *saved_mask)
 {
-	omap4_prm_write_inst_reg(saved_mask[0], OMAP4430_PRM_DEVICE_INST,
+	omap4_prm_write_inst_reg(saved_mask[0], OMAP4430_PRM_OCP_SOCKET_INST,
 				 OMAP4_PRM_IRQENABLE_MPU_OFFSET);
-	omap4_prm_write_inst_reg(saved_mask[1], OMAP4430_PRM_DEVICE_INST,
+	omap4_prm_write_inst_reg(saved_mask[1], OMAP4430_PRM_OCP_SOCKET_INST,
 				 OMAP4_PRM_IRQENABLE_MPU_2_OFFSET);
 }
 
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index 873b51d..d28f848 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -290,7 +290,7 @@ int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup)
 		goto err;
 	}
 
-	for (i = 0; i <= irq_setup->nr_regs; i++) {
+	for (i = 0; i < irq_setup->nr_regs; i++) {
 		gc = irq_alloc_generic_chip("PRCM", 1,
 			irq_setup->base_irq + i * 32, prm_base,
 			handle_level_irq);
diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c
index f51348d..dde8a11 100644
--- a/arch/arm/mach-omap2/usb-host.c
+++ b/arch/arm/mach-omap2/usb-host.c
@@ -54,7 +54,7 @@ static struct omap_device_pm_latency omap_uhhtll_latency[] = {
 /*
  * setup_ehci_io_mux - initialize IO pad mux for USBHOST
  */
-static void setup_ehci_io_mux(const enum usbhs_omap_port_mode *port_mode)
+static void __init setup_ehci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 {
 	switch (port_mode[0]) {
 	case OMAP_EHCI_PORT_MODE_PHY:
@@ -197,7 +197,8 @@ static void setup_ehci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 	return;
 }
 
-static void setup_4430ehci_io_mux(const enum usbhs_omap_port_mode *port_mode)
+static
+void __init setup_4430ehci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 {
 	switch (port_mode[0]) {
 	case OMAP_EHCI_PORT_MODE_PHY:
@@ -315,7 +316,7 @@ static void setup_4430ehci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 	}
 }
 
-static void setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
+static void __init setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 {
 	switch (port_mode[0]) {
 	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
@@ -412,7 +413,8 @@ static void setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 	}
 }
 
-static void setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
+static
+void __init setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 {
 	switch (port_mode[0]) {
 	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: