Merge tag 'pm+acpi-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI and power management updates from Rafael J Wysocki:

 - New power capping framework and the the Intel Running Average Power
   Limit (RAPL) driver using it from Srinivas Pandruvada and Jacob Pan.

 - Addition of the in-kernel switching feature to the arm_big_little
   cpufreq driver from Viresh Kumar and Nicolas Pitre.

 - cpufreq support for iMac G5 from Aaro Koskinen.

 - Baytrail processors support for intel_pstate from Dirk Brandewie.

 - cpufreq support for Midway/ECX-2000 from Mark Langsdorf.

 - ARM vexpress/TC2 cpufreq support from Sudeep KarkadaNagesha.

 - ACPI power management support for the I2C and SPI bus types from Mika
   Westerberg and Lv Zheng.

 - cpufreq core fixes and cleanups from Viresh Kumar, Srivatsa S Bhat,
   Stratos Karafotis, Xiaoguang Chen, Lan Tianyu.

 - cpufreq drivers updates (mostly fixes and cleanups) from Viresh
   Kumar, Aaro Koskinen, Jungseok Lee, Sudeep KarkadaNagesha, Lukasz
   Majewski, Manish Badarkhe, Hans-Christian Egtvedt, Evgeny Kapaev.

 - intel_pstate updates from Dirk Brandewie and Adrian Huang.

 - ACPICA update to version 20130927 includig fixes and cleanups and
   some reduction of divergences between the ACPICA code in the kernel
   and ACPICA upstream in order to improve the automatic ACPICA patch
   generation process.  From Bob Moore, Lv Zheng, Tomasz Nowicki, Naresh
   Bhat, Bjorn Helgaas, David E Box.

 - ACPI IPMI driver fixes and cleanups from Lv Zheng.

 - ACPI hotplug fixes and cleanups from Bjorn Helgaas, Toshi Kani, Zhang
   Yanfei, Rafael J Wysocki.

 - Conversion of the ACPI AC driver to the platform bus type and
   multiple driver fixes and cleanups related to ACPI from Zhang Rui.

 - ACPI processor driver fixes and cleanups from Hanjun Guo, Jiang Liu,
   Bartlomiej Zolnierkiewicz, Mathieu Rhéaume, Rafael J Wysocki.

 - Fixes and cleanups and new blacklist entries related to the ACPI
   video support from Aaron Lu, Felipe Contreras, Lennart Poettering,
   Kirill Tkhai.

 - cpuidle core cleanups from Viresh Kumar and Lorenzo Pieralisi.

 - cpuidle drivers fixes and cleanups from Daniel Lezcano, Jingoo Han,
   Bartlomiej Zolnierkiewicz, Prarit Bhargava.

 - devfreq updates from Sachin Kamat, Dan Carpenter, Manish Badarkhe.

 - Operation Performance Points (OPP) core updates from Nishanth Menon.

 - Runtime power management core fix from Rafael J Wysocki and update
   from Ulf Hansson.

 - Hibernation fixes from Aaron Lu and Rafael J Wysocki.

 - Device suspend/resume lockup detection mechanism from Benoit Goby.

 - Removal of unused proc directories created for various ACPI drivers
   from Lan Tianyu.

 - ACPI LPSS driver fix and new device IDs for the ACPI platform scan
   handler from Heikki Krogerus and Jarkko Nikula.

 - New ACPI _OSI blacklist entry for Toshiba NB100 from Levente Kurusa.

 - Assorted fixes and cleanups related to ACPI from Andy Shevchenko, Al
   Stone, Bartlomiej Zolnierkiewicz, Colin Ian King, Dan Carpenter,
   Felipe Contreras, Jianguo Wu, Lan Tianyu, Yinghai Lu, Mathias Krause,
   Liu Chuansheng.

 - Assorted PM fixes and cleanups from Andy Shevchenko, Thierry Reding,
   Jean-Christophe Plagniol-Villard.

* tag 'pm+acpi-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (386 commits)
  cpufreq: conservative: fix requested_freq reduction issue
  ACPI / hotplug: Consolidate deferred execution of ACPI hotplug routines
  PM / runtime: Use pm_runtime_put_sync() in __device_release_driver()
  ACPI / event: remove unneeded NULL pointer check
  Revert "ACPI / video: Ignore BIOS initial backlight value for HP 250 G1"
  ACPI / video: Quirk initial backlight level 0
  ACPI / video: Fix initial level validity test
  intel_pstate: skip the driver if ACPI has power mgmt option
  PM / hibernate: Avoid overflow in hibernate_preallocate_memory()
  ACPI / hotplug: Do not execute "insert in progress" _OST
  ACPI / hotplug: Carry out PCI root eject directly
  ACPI / hotplug: Merge device hot-removal routines
  ACPI / hotplug: Make acpi_bus_hot_remove_device() internal
  ACPI / hotplug: Simplify device ejection routines
  ACPI / hotplug: Fix handle_root_bridge_removal()
  ACPI / hotplug: Refuse to hot-remove all objects with disabled hotplug
  ACPI / scan: Start matching drivers after trying scan handlers
  ACPI: Remove acpi_pci_slot_init() headers from internal.h
  ACPI / blacklist: fix name of ThinkPad Edge E530
  PowerCap: Fix build error with option -Werror=format-security
  ...

Conflicts:
	arch/arm/mach-omap2/opp.c
	drivers/Kconfig
	drivers/spi/spi.c

51 files changed, 681 insertions, 396 deletions

diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 3b0a953..c1b7370 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -98,7 +98,6 @@ obj-y				+= leds.o
 # Power Management
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_AT91_SLOW_CLOCK)	+= pm_slowclock.o
-obj-$(CONFIG_CPU_IDLE)	+= cpuidle.o
 
 ifeq ($(CONFIG_PM_DEBUG),y)
 CFLAGS_pm.o += -DDEBUG
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index 4aad93d..25805f2 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -27,6 +27,7 @@
 #include "generic.h"
 #include "clock.h"
 #include "sam9_smc.h"
+#include "pm.h"
 
 /* --------------------------------------------------------------------
  *  Clocks
@@ -327,6 +328,7 @@ static void __init at91rm9200_ioremap_registers(void)
 {
 	at91rm9200_ioremap_st(AT91RM9200_BASE_ST);
 	at91_ioremap_ramc(0, AT91RM9200_BASE_MC, 256);
+	at91_pm_set_standby(at91rm9200_standby);
 }
 
 static void __init at91rm9200_initialize(void)
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index 5de6074..f8629a3 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -28,6 +28,7 @@
 #include "generic.h"
 #include "clock.h"
 #include "sam9_smc.h"
+#include "pm.h"
 
 /* --------------------------------------------------------------------
  *  Clocks
@@ -342,6 +343,7 @@ static void __init at91sam9260_ioremap_registers(void)
 	at91sam926x_ioremap_pit(AT91SAM9260_BASE_PIT);
 	at91sam9_ioremap_smc(0, AT91SAM9260_BASE_SMC);
 	at91_ioremap_matrix(AT91SAM9260_BASE_MATRIX);
+	at91_pm_set_standby(at91sam9_sdram_standby);
 }
 
 static void __init at91sam9260_initialize(void)
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 0e07932..1f3867a 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -27,6 +27,7 @@
 #include "generic.h"
 #include "clock.h"
 #include "sam9_smc.h"
+#include "pm.h"
 
 /* --------------------------------------------------------------------
  *  Clocks
@@ -284,6 +285,7 @@ static void __init at91sam9261_ioremap_registers(void)
 	at91sam926x_ioremap_pit(AT91SAM9261_BASE_PIT);
 	at91sam9_ioremap_smc(0, AT91SAM9261_BASE_SMC);
 	at91_ioremap_matrix(AT91SAM9261_BASE_MATRIX);
+	at91_pm_set_standby(at91sam9_sdram_standby);
 }
 
 static void __init at91sam9261_initialize(void)
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index 6ce7d18..90d455d 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -26,6 +26,7 @@
 #include "generic.h"
 #include "clock.h"
 #include "sam9_smc.h"
+#include "pm.h"
 
 /* --------------------------------------------------------------------
  *  Clocks
@@ -321,6 +322,7 @@ static void __init at91sam9263_ioremap_registers(void)
 	at91sam9_ioremap_smc(0, AT91SAM9263_BASE_SMC0);
 	at91sam9_ioremap_smc(1, AT91SAM9263_BASE_SMC1);
 	at91_ioremap_matrix(AT91SAM9263_BASE_MATRIX);
+	at91_pm_set_standby(at91sam9_sdram_standby);
 }
 
 static void __init at91sam9263_initialize(void)
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index 474ee04..e9bf0b8 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -26,6 +26,7 @@
 #include "generic.h"
 #include "clock.h"
 #include "sam9_smc.h"
+#include "pm.h"
 
 /* --------------------------------------------------------------------
  *  Clocks
@@ -370,6 +371,7 @@ static void __init at91sam9g45_ioremap_registers(void)
 	at91sam926x_ioremap_pit(AT91SAM9G45_BASE_PIT);
 	at91sam9_ioremap_smc(0, AT91SAM9G45_BASE_SMC);
 	at91_ioremap_matrix(AT91SAM9G45_BASE_MATRIX);
+	at91_pm_set_standby(at91_ddr_standby);
 }
 
 static void __init at91sam9g45_initialize(void)
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index d4ec0d9..88995af 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -27,6 +27,7 @@
 #include "generic.h"
 #include "clock.h"
 #include "sam9_smc.h"
+#include "pm.h"
 
 /* --------------------------------------------------------------------
  *  Clocks
@@ -287,6 +288,7 @@ static void __init at91sam9rl_ioremap_registers(void)
 	at91sam926x_ioremap_pit(AT91SAM9RL_BASE_PIT);
 	at91sam9_ioremap_smc(0, AT91SAM9RL_BASE_SMC);
 	at91_ioremap_matrix(AT91SAM9RL_BASE_MATRIX);
+	at91_pm_set_standby(at91sam9_sdram_standby);
 }
 
 static void __init at91sam9rl_initialize(void)
diff --git a/arch/arm/mach-at91/cpuidle.c b/arch/arm/mach-at91/cpuidle.c
deleted file mode 100644
index 4ec6a6d..0000000
--- a/arch/arm/mach-at91/cpuidle.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * based on arch/arm/mach-kirkwood/cpuidle.c
- *
- * CPU idle support for AT91 SoC
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * The cpu idle uses wait-for-interrupt and RAM self refresh in order
- * to implement two idle states -
- * #1 wait-for-interrupt
- * #2 wait-for-interrupt and RAM self refresh
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/cpuidle.h>
-#include <linux/io.h>
-#include <linux/export.h>
-#include <asm/proc-fns.h>
-#include <asm/cpuidle.h>
-#include <mach/cpu.h>
-
-#include "pm.h"
-
-#define AT91_MAX_STATES	2
-
-/* Actual code that puts the SoC in different idle states */
-static int at91_enter_idle(struct cpuidle_device *dev,
-			struct cpuidle_driver *drv,
-			       int index)
-{
-	if (cpu_is_at91rm9200())
-		at91rm9200_standby();
-	else if (cpu_is_at91sam9g45())
-		at91sam9g45_standby();
-	else if (cpu_is_at91sam9263())
-		at91sam9263_standby();
-	else
-		at91sam9_standby();
-
-	return index;
-}
-
-static struct cpuidle_driver at91_idle_driver = {
-	.name			= "at91_idle",
-	.owner			= THIS_MODULE,
-	.states[0]		= ARM_CPUIDLE_WFI_STATE,
-	.states[1]		= {
-		.enter			= at91_enter_idle,
-		.exit_latency		= 10,
-		.target_residency	= 10000,
-		.flags			= CPUIDLE_FLAG_TIME_VALID,
-		.name			= "RAM_SR",
-		.desc			= "WFI and DDR Self Refresh",
-	},
-	.state_count = AT91_MAX_STATES,
-};
-
-/* Initialize CPU idle by registering the idle states */
-static int __init at91_init_cpuidle(void)
-{
-	return cpuidle_register(&at91_idle_driver, NULL);
-}
-
-device_initcall(at91_init_cpuidle);
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 15afb5d..9986542 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -39,6 +39,8 @@
 #include "at91_rstc.h"
 #include "at91_shdwc.h"
 
+static void (*at91_pm_standby)(void);
+
 static void __init show_reset_status(void)
 {
 	static char reset[] __initdata = "reset";
@@ -266,14 +268,8 @@ static int at91_pm_enter(suspend_state_t state)
 			 * For ARM 926 based chips, this requirement is weaker
 			 * as at91sam9 can access a RAM in self-refresh mode.
 			 */
-			if (cpu_is_at91rm9200())
-				at91rm9200_standby();
-			else if (cpu_is_at91sam9g45())
-				at91sam9g45_standby();
-			else if (cpu_is_at91sam9263())
-				at91sam9263_standby();
-			else
-				at91sam9_standby();
+			if (at91_pm_standby)
+				at91_pm_standby();
 			break;
 
 		case PM_SUSPEND_ON:
@@ -314,6 +310,18 @@ static const struct platform_suspend_ops at91_pm_ops = {
 	.end	= at91_pm_end,
 };
 
+static struct platform_device at91_cpuidle_device = {
+	.name = "cpuidle-at91",
+};
+
+void at91_pm_set_standby(void (*at91_standby)(void))
+{
+	if (at91_standby) {
+		at91_cpuidle_device.dev.platform_data = at91_standby;
+		at91_pm_standby = at91_standby;
+	}
+}
+
 static int __init at91_pm_init(void)
 {
 #ifdef CONFIG_AT91_SLOW_CLOCK
@@ -325,6 +333,9 @@ static int __init at91_pm_init(void)
 	/* AT91RM9200 SDRAM low-power mode cannot be used with self-refresh. */
 	if (cpu_is_at91rm9200())
 		at91_ramc_write(0, AT91RM9200_SDRAMC_LPR, 0);
+	
+	if (at91_cpuidle_device.dev.platform_data)
+		platform_device_register(&at91_cpuidle_device);
 
 	suspend_set_ops(&at91_pm_ops);
 
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index 2f5908f..3ed190c 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -11,9 +11,13 @@
 #ifndef __ARCH_ARM_MACH_AT91_PM
 #define __ARCH_ARM_MACH_AT91_PM
 
+#include <asm/proc-fns.h>
+
 #include <mach/at91_ramc.h>
 #include <mach/at91rm9200_sdramc.h>
 
+extern void at91_pm_set_standby(void (*at91_standby)(void));
+
 /*
  * The AT91RM9200 goes into self-refresh mode with this command, and will
  * terminate self-refresh automatically on the next SDRAM access.
@@ -45,16 +49,18 @@ static inline void at91rm9200_standby(void)
 /* We manage both DDRAM/SDRAM controllers, we need more than one value to
  * remember.
  */
-static inline void at91sam9g45_standby(void)
+static inline void at91_ddr_standby(void)
 {
 	/* Those two values allow us to delay self-refresh activation
 	 * to the maximum. */
-	u32 lpr0, lpr1;
-	u32 saved_lpr0, saved_lpr1;
+	u32 lpr0, lpr1 = 0;
+	u32 saved_lpr0, saved_lpr1 = 0;
 
-	saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR);
-	lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB;
-	lpr1 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
+	if (at91_ramc_base[1]) {
+		saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR);
+		lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB;
+		lpr1 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
+	}
 
 	saved_lpr0 = at91_ramc_read(0, AT91_DDRSDRC_LPR);
 	lpr0 = saved_lpr0 & ~AT91_DDRSDRC_LPCB;
@@ -62,25 +68,29 @@ static inline void at91sam9g45_standby(void)
 
 	/* self-refresh mode now */
 	at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0);
-	at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1);
+	if (at91_ramc_base[1])
+		at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1);
 
 	cpu_do_idle();
 
 	at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0);
-	at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1);
+	if (at91_ramc_base[1])
+		at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1);
 }
 
 /* We manage both DDRAM/SDRAM controllers, we need more than one value to
  * remember.
  */
-static inline void at91sam9263_standby(void)
+static inline void at91sam9_sdram_standby(void)
 {
-	u32 lpr0, lpr1;
-	u32 saved_lpr0, saved_lpr1;
+	u32 lpr0, lpr1 = 0;
+	u32 saved_lpr0, saved_lpr1 = 0;
 
-	saved_lpr1 = at91_ramc_read(1, AT91_SDRAMC_LPR);
-	lpr1 = saved_lpr1 & ~AT91_SDRAMC_LPCB;
-	lpr1 |= AT91_SDRAMC_LPCB_SELF_REFRESH;
+	if (at91_ramc_base[1]) {
+		saved_lpr1 = at91_ramc_read(1, AT91_SDRAMC_LPR);
+		lpr1 = saved_lpr1 & ~AT91_SDRAMC_LPCB;
+		lpr1 |= AT91_SDRAMC_LPCB_SELF_REFRESH;
+	}
 
 	saved_lpr0 = at91_ramc_read(0, AT91_SDRAMC_LPR);
 	lpr0 = saved_lpr0 & ~AT91_SDRAMC_LPCB;
@@ -88,27 +98,14 @@ static inline void at91sam9263_standby(void)
 
 	/* self-refresh mode now */
 	at91_ramc_write(0, AT91_SDRAMC_LPR, lpr0);
-	at91_ramc_write(1, AT91_SDRAMC_LPR, lpr1);
+	if (at91_ramc_base[1])
+		at91_ramc_write(1, AT91_SDRAMC_LPR, lpr1);
 
 	cpu_do_idle();
 
 	at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr0);
-	at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1);
-}
-
-static inline void at91sam9_standby(void)
-{
-	u32 saved_lpr, lpr;
-
-	saved_lpr = at91_ramc_read(0, AT91_SDRAMC_LPR);
-
-	lpr = saved_lpr & ~AT91_SDRAMC_LPCB;
-	at91_ramc_write(0, AT91_SDRAMC_LPR, lpr |
-			AT91_SDRAMC_LPCB_SELF_REFRESH);
-
-	cpu_do_idle();
-
-	at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr);
+	if (at91_ramc_base[1])
+		at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1);
 }
 
 #endif
diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index b17fbcf..094b345 100644
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -23,6 +23,7 @@
 #include "at91_shdwc.h"
 #include "soc.h"
 #include "generic.h"
+#include "pm.h"
 
 struct at91_init_soc __initdata at91_boot_soc;
 
@@ -376,15 +377,16 @@ static void at91_dt_rstc(void)
 }
 
 static struct of_device_id ramc_ids[] = {
-	{ .compatible = "atmel,at91rm9200-sdramc" },
-	{ .compatible = "atmel,at91sam9260-sdramc" },
-	{ .compatible = "atmel,at91sam9g45-ddramc" },
+	{ .compatible = "atmel,at91rm9200-sdramc", .data = at91rm9200_standby },
+	{ .compatible = "atmel,at91sam9260-sdramc", .data = at91sam9_sdram_standby },
+	{ .compatible = "atmel,at91sam9g45-ddramc", .data = at91_ddr_standby },
 	{ /*sentinel*/ }
 };
 
 static void at91_dt_ramc(void)
 {
 	struct device_node *np;
+	const struct of_device_id *of_id;
 
 	np = of_find_matching_node(NULL, ramc_ids);
 	if (!np)
@@ -396,6 +398,12 @@ static void at91_dt_ramc(void)
 	/* the controller may have 2 banks */
 	at91_ramc_base[1] = of_iomap(np, 1);
 
+	of_id = of_match_node(ramc_ids, np);
+	if (!of_id)
+		pr_warn("AT91: ramc no standby function available\n");
+	else
+		at91_pm_set_standby(of_id->data);
+
 	of_node_put(np);
 }
 
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index e026b19..a075b3e 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -40,7 +40,6 @@ config ARCH_DAVINCI_DA850
 	bool "DA850/OMAP-L138/AM18x based system"
 	select ARCH_DAVINCI_DA8XX
 	select ARCH_HAS_CPUFREQ
-	select CPU_FREQ_TABLE
 	select CP_INTC
 
 config ARCH_DAVINCI_DA8XX
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index a4e7ba8..61d2906 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -28,6 +28,7 @@
 #include <linux/of_address.h>
 #include <linux/irqchip/arm-gic.h>
 #include <linux/irqchip/chained_irq.h>
+#include <linux/platform_device.h>
 
 #include <asm/proc-fns.h>
 #include <asm/exception.h>
@@ -292,6 +293,16 @@ void exynos5_restart(enum reboot_mode mode, const char *cmd)
 	__raw_writel(val, addr);
 }
 
+static struct platform_device exynos_cpuidle = {
+	.name		= "exynos_cpuidle",
+	.id		= -1,
+};
+
+void __init exynos_cpuidle_init(void)
+{
+	platform_device_register(&exynos_cpuidle);
+}
+
 void __init exynos_init_late(void)
 {
 	if (of_machine_is_compatible("samsung,exynos5440"))
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index f0fa205..ff9b6a9 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -21,6 +21,7 @@ struct map_desc;
 void exynos_init_io(void);
 void exynos4_restart(enum reboot_mode mode, const char *cmd);
 void exynos5_restart(enum reboot_mode mode, const char *cmd);
+void exynos_cpuidle_init(void);
 void exynos_init_late(void);
 
 void exynos_firmware_init(void);
diff --git a/arch/arm/mach-exynos/cpuidle.c b/arch/arm/mach-exynos/cpuidle.c
index ac139226..ddbfe87 100644
--- a/arch/arm/mach-exynos/cpuidle.c
+++ b/arch/arm/mach-exynos/cpuidle.c
@@ -15,6 +15,7 @@
 #include <linux/io.h>
 #include <linux/export.h>
 #include <linux/time.h>
+#include <linux/platform_device.h>
 
 #include <asm/proc-fns.h>
 #include <asm/smp_scu.h>
@@ -192,7 +193,7 @@ static void __init exynos5_core_down_clk(void)
 	__raw_writel(tmp, EXYNOS5_PWR_CTRL2);
 }
 
-static int __init exynos4_init_cpuidle(void)
+static int exynos_cpuidle_probe(struct platform_device *pdev)
 {
 	int cpu_id, ret;
 	struct cpuidle_device *device;
@@ -205,7 +206,7 @@ static int __init exynos4_init_cpuidle(void)
 
 	ret = cpuidle_register_driver(&exynos4_idle_driver);
 	if (ret) {
-		printk(KERN_ERR "CPUidle failed to register driver\n");
+		dev_err(&pdev->dev, "failed to register cpuidle driver\n");
 		return ret;
 	}
 
@@ -219,11 +220,20 @@ static int __init exynos4_init_cpuidle(void)
 
 		ret = cpuidle_register_device(device);
 		if (ret) {
-			printk(KERN_ERR "CPUidle register device failed\n");
+			dev_err(&pdev->dev, "failed to register cpuidle device\n");
 			return ret;
 		}
 	}
 
 	return 0;
 }
-device_initcall(exynos4_init_cpuidle);
+
+static struct platform_driver exynos_cpuidle_driver = {
+	.probe	= exynos_cpuidle_probe,
+	.driver = {
+		.name = "exynos_cpuidle",
+		.owner = THIS_MODULE,
+	},
+};
+
+module_platform_driver(exynos_cpuidle_driver);
diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c
index 4b8f6e2..4603e6b 100644
--- a/arch/arm/mach-exynos/mach-exynos4-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos4-dt.c
@@ -21,6 +21,8 @@
 
 static void __init exynos4_dt_machine_init(void)
 {
+	exynos_cpuidle_init();
+
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c
index 7976ab3..1fe075a 100644
--- a/arch/arm/mach-exynos/mach-exynos5-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos5-dt.c
@@ -43,6 +43,8 @@ static void __init exynos5_dt_machine_init(void)
 		}
 	}
 
+	exynos_cpuidle_init();
+
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 0f9f241..d0cfb22 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -22,7 +22,7 @@
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
-#include <linux/opp.h>
+#include <linux/pm_opp.h>
 #include <linux/phy.h>
 #include <linux/reboot.h>
 #include <linux/regmap.h>
@@ -176,7 +176,7 @@ static void __init imx6q_opp_check_1p2ghz(struct device *cpu_dev)
 	val = readl_relaxed(base + OCOTP_CFG3);
 	val >>= OCOTP_CFG3_SPEED_SHIFT;
 	if ((val & 0x3) != OCOTP_CFG3_SPEED_1P2GHZ)
-		if (opp_disable(cpu_dev, 1200000000))
+		if (dev_pm_opp_disable(cpu_dev, 1200000000))
 			pr_warn("failed to disable 1.2 GHz OPP\n");
 
 put_node:
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 8b9cd06..a516c1b 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -25,7 +25,7 @@
 #include <linux/gpio.h>
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
-#include <linux/opp.h>
+#include <linux/pm_opp.h>
 #include <linux/cpu.h>
 
 #include <linux/mtd/mtd.h>
@@ -516,11 +516,11 @@ static int __init beagle_opp_init(void)
 			return -ENODEV;
 		}
 		/* Enable MPU 1GHz and lower opps */
-		r = opp_enable(mpu_dev, 800000000);
+		r = dev_pm_opp_enable(mpu_dev, 800000000);
 		/* TODO: MPU 1GHz needs SR and ABB */
 
 		/* Enable IVA 800MHz and lower opps */
-		r |= opp_enable(iva_dev, 660000000);
+		r |= dev_pm_opp_enable(iva_dev, 660000000);
 		/* TODO: DSP 800MHz needs SR and ABB */
 		if (r) {
 			pr_err("%s: failed to enable higher opp %d\n",
@@ -529,8 +529,8 @@ static int __init beagle_opp_init(void)
 			 * Cleanup - disable the higher freqs - we dont care
 			 * about the results
 			 */
-			opp_disable(mpu_dev, 800000000);
-			opp_disable(iva_dev, 660000000);
+			dev_pm_opp_disable(mpu_dev, 800000000);
+			dev_pm_opp_disable(iva_dev, 660000000);
 		}
 	}
 	return 0;
diff --git a/arch/arm/mach-omap2/omap-pm.h b/arch/arm/mach-omap2/omap-pm.h
index 67faa7b..1d777e6 100644
--- a/arch/arm/mach-omap2/omap-pm.h
+++ b/arch/arm/mach-omap2/omap-pm.h
@@ -17,7 +17,7 @@
 #include <linux/device.h>
 #include <linux/cpufreq.h>
 #include <linux/clk.h>
-#include <linux/opp.h>
+#include <linux/pm_opp.h>
 
 /*
  * agent_id values for use with omap_pm_set_min_bus_tput():
diff --git a/arch/arm/mach-omap2/opp.c b/arch/arm/mach-omap2/opp.c
index 82fd8c7..a358a07 100644
--- a/arch/arm/mach-omap2/opp.c
+++ b/arch/arm/mach-omap2/opp.c
@@ -18,7 +18,7 @@
  */
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/opp.h>
+#include <linux/pm_opp.h>
 #include <linux/cpu.h>
 
 #include "omap_device.h"
@@ -85,14 +85,14 @@ int __init omap_init_opp_table(struct omap_opp_def *opp_def,
 			dev = &oh->od->pdev->dev;
 		}
 
-		r = opp_add(dev, opp_def->freq, opp_def->u_volt);
+		r = dev_pm_opp_add(dev, opp_def->freq, opp_def->u_volt);
 		if (r) {
 			dev_err(dev, "%s: add OPP %ld failed for %s [%d] result=%d\n",
 				__func__, opp_def->freq,
 				opp_def->hwmod_name, i, r);
 		} else {
 			if (!opp_def->default_available)
-				r = opp_disable(dev, opp_def->freq);
+				r = dev_pm_opp_disable(dev, opp_def->freq);
 			if (r)
 				dev_err(dev, "%s: disable %ld failed for %s [%d] result=%d\n",
 					__func__, opp_def->freq,
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 360b2da..e1b4141 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -13,7 +13,7 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/err.h>
-#include <linux/opp.h>
+#include <linux/pm_opp.h>
 #include <linux/export.h>
 #include <linux/suspend.h>
 #include <linux/cpu.h>
@@ -131,7 +131,7 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name,
 {
 	struct voltagedomain *voltdm;
 	struct clk *clk;
-	struct opp *opp;
+	struct dev_pm_opp *opp;
 	unsigned long freq, bootup_volt;
 	struct device *dev;
 
@@ -172,7 +172,7 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name,
 	clk_put(clk);
 
 	rcu_read_lock();
-	opp = opp_find_freq_ceil(dev, &freq);
+	opp = dev_pm_opp_find_freq_ceil(dev, &freq);
 	if (IS_ERR(opp)) {
 		rcu_read_unlock();
 		pr_err("%s: unable to find boot up OPP for vdd_%s\n",
@@ -180,7 +180,7 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name,
 		goto exit;
 	}
 
-	bootup_volt = opp_get_voltage(opp);
+	bootup_volt = dev_pm_opp_get_voltage(opp);
 	rcu_read_unlock();
 	if (!bootup_volt) {
 		pr_err("%s: unable to find voltage corresponding to the bootup OPP for vdd_%s\n",
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index a842711..96100db 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -615,14 +615,12 @@ endmenu
 config PXA25x
 	bool
 	select CPU_XSCALE
-	select CPU_FREQ_TABLE if CPU_FREQ
 	help
 	  Select code specific to PXA21x/25x/26x variants
 
 config PXA27x
 	bool
 	select CPU_XSCALE
-	select CPU_FREQ_TABLE if CPU_FREQ
 	help
 	  Select code specific to PXA27x variants
 
@@ -635,7 +633,6 @@ config CPU_PXA26x
 config PXA3xx
 	bool
 	select CPU_XSC3
-	select CPU_FREQ_TABLE if CPU_FREQ
 	help
 	  Select code specific to PXA3xx variants
 
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index f25b611..d4ea142 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -42,74 +42,31 @@ EXPORT_SYMBOL(reset_status);
 /*
  * This table is setup for a 3.6864MHz Crystal.
  */
-static const unsigned short cclk_frequency_100khz[NR_FREQS] = {
-	 590,	/*  59.0 MHz */
-	 737,	/*  73.7 MHz */
-	 885,	/*  88.5 MHz */
-	1032,	/* 103.2 MHz */
-	1180,	/* 118.0 MHz */
-	1327,	/* 132.7 MHz */
-	1475,	/* 147.5 MHz */
-	1622,	/* 162.2 MHz */
-	1769,	/* 176.9 MHz */
-	1917,	/* 191.7 MHz */
-	2064,	/* 206.4 MHz */
-	2212,	/* 221.2 MHz */
-	2359,	/* 235.9 MHz */
-	2507,	/* 250.7 MHz */
-	2654,	/* 265.4 MHz */
-	2802	/* 280.2 MHz */
+struct cpufreq_frequency_table sa11x0_freq_table[NR_FREQS+1] = {
+	{ .frequency = 59000,	/*  59.0 MHz */},
+	{ .frequency = 73700,	/*  73.7 MHz */},
+	{ .frequency = 88500,	/*  88.5 MHz */},
+	{ .frequency = 103200,	/* 103.2 MHz */},
+	{ .frequency = 118000,	/* 118.0 MHz */},
+	{ .frequency = 132700,	/* 132.7 MHz */},
+	{ .frequency = 147500,	/* 147.5 MHz */},
+	{ .frequency = 162200,	/* 162.2 MHz */},
+	{ .frequency = 176900,	/* 176.9 MHz */},
+	{ .frequency = 191700,	/* 191.7 MHz */},
+	{ .frequency = 206400,	/* 206.4 MHz */},
+	{ .frequency = 221200,	/* 221.2 MHz */},
+	{ .frequency = 235900,	/* 235.9 MHz */},
+	{ .frequency = 250700,	/* 250.7 MHz */},
+	{ .frequency = 265400,	/* 265.4 MHz */},
+	{ .frequency = 280200,	/* 280.2 MHz */},
+	{ .frequency = CPUFREQ_TABLE_END, },
 };
 
-/* rounds up(!)  */
-unsigned int sa11x0_freq_to_ppcr(unsigned int khz)
-{
-	int i;
-
-	khz /= 100;
-
-	for (i = 0; i < NR_FREQS; i++)
-		if (cclk_frequency_100khz[i] >= khz)
-			break;
-
-	return i;
-}
-
-unsigned int sa11x0_ppcr_to_freq(unsigned int idx)
-{
-	unsigned int freq = 0;
-	if (idx < NR_FREQS)
-		freq = cclk_frequency_100khz[idx] * 100;
-	return freq;
-}
-
-
-/* make sure that only the "userspace" governor is run -- anything else wouldn't make sense on
- * this platform, anyway.
- */
-int sa11x0_verify_speed(struct cpufreq_policy *policy)
-{
-	unsigned int tmp;
-	if (policy->cpu)
-		return -EINVAL;
-
-	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, policy->cpuinfo.max_freq);
-
-	/* make sure that at least one frequency is within the policy */
-	tmp = cclk_frequency_100khz[sa11x0_freq_to_ppcr(policy->min)] * 100;
-	if (tmp > policy->max)
-		policy->max = tmp;
-
-	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, policy->cpuinfo.max_freq);
-
-	return 0;
-}
-
 unsigned int sa11x0_getspeed(unsigned int cpu)
 {
 	if (cpu)
 		return 0;
-	return cclk_frequency_100khz[PPCR & 0xf] * 100;
+	return sa11x0_freq_table[PPCR & 0xf].frequency;
 }
 
 /*
diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h
index 9a33695..0d92e11 100644
--- a/arch/arm/mach-sa1100/generic.h
+++ b/arch/arm/mach-sa1100/generic.h
@@ -3,6 +3,7 @@
  *
  * Author: Nicolas Pitre
  */
+#include <linux/cpufreq.h>
 #include <linux/reboot.h>
 
 extern void sa1100_timer_init(void);
@@ -19,12 +20,8 @@ extern void sa11x0_init_late(void);
 extern void sa1110_mb_enable(void);
 extern void sa1110_mb_disable(void);
 
-struct cpufreq_policy;
-
-extern unsigned int sa11x0_freq_to_ppcr(unsigned int khz);
-extern int sa11x0_verify_speed(struct cpufreq_policy *policy);
+extern struct cpufreq_frequency_table sa11x0_freq_table[];
 extern unsigned int sa11x0_getspeed(unsigned int cpu);
-extern unsigned int sa11x0_ppcr_to_freq(unsigned int idx);
 
 struct flash_platform_data;
 struct resource;
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index c67f8ad..0034d2c 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -29,7 +29,6 @@ if ARCH_U8500
 
 config UX500_SOC_DB8500
 	bool
-	select CPU_FREQ_TABLE if CPU_FREQ
 	select MFD_DB8500_PRCMU
 	select PINCTRL_DB8500
 	select PINCTRL_DB8540
diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
index cbbb81e..4a70be4 100644
--- a/arch/arm/mach-vexpress/Kconfig
+++ b/arch/arm/mach-vexpress/Kconfig
@@ -65,10 +65,22 @@ config ARCH_VEXPRESS_DCSCB
 	  This is needed to provide CPU and cluster power management
 	  on RTSM implementing big.LITTLE.
 
+config ARCH_VEXPRESS_SPC
+	bool "Versatile Express Serial Power Controller (SPC)"
+	select ARCH_HAS_CPUFREQ
+	select ARCH_HAS_OPP
+	select PM_OPP
+	help
+	  The TC2 (A15x2 A7x3) versatile express core tile integrates a logic
+	  block called Serial Power Controller (SPC) that provides the interface
+	  between the dual cluster test-chip and the M3 microcontroller that
+	  carries out power management.
+
 config ARCH_VEXPRESS_TC2_PM
 	bool "Versatile Express TC2 power management"
 	depends on MCPM
 	select ARM_CCI
+	select ARCH_VEXPRESS_SPC
 	help
 	  Support for CPU and cluster power management on Versatile Express
 	  with a TC2 (A15x2 A7x3) big.LITTLE core tile.
diff --git a/arch/arm/mach-vexpress/Makefile b/arch/arm/mach-vexpress/Makefile
index 505e64a..0997e0b 100644
--- a/arch/arm/mach-vexpress/Makefile
+++ b/arch/arm/mach-vexpress/Makefile
@@ -8,7 +8,8 @@ obj-y					:= v2m.o
 obj-$(CONFIG_ARCH_VEXPRESS_CA9X4)	+= ct-ca9x4.o
 obj-$(CONFIG_ARCH_VEXPRESS_DCSCB)	+= dcscb.o	dcscb_setup.o
 CFLAGS_dcscb.o				+= -march=armv7-a
-obj-$(CONFIG_ARCH_VEXPRESS_TC2_PM)	+= tc2_pm.o spc.o
+obj-$(CONFIG_ARCH_VEXPRESS_SPC)		+= spc.o
+obj-$(CONFIG_ARCH_VEXPRESS_TC2_PM)	+= tc2_pm.o
 CFLAGS_tc2_pm.o				+= -march=armv7-a
 obj-$(CONFIG_SMP)			+= platsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)		+= hotplug.o
diff --git a/arch/arm/mach-vexpress/spc.c b/arch/arm/mach-vexpress/spc.c
index eefb029..033d34d 100644
--- a/arch/arm/mach-vexpress/spc.c
+++ b/arch/arm/mach-vexpress/spc.c
@@ -17,14 +17,31 @@
  * GNU General Public License for more details.
  */
 
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/cpu.h>
+#include <linux/delay.h>
 #include <linux/err.h>
+#include <linux/interrupt.h>
 #include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/pm_opp.h>
 #include <linux/slab.h>
+#include <linux/semaphore.h>
 
 #include <asm/cacheflush.h>
 
 #define SPCLOG "vexpress-spc: "
 
+#define PERF_LVL_A15		0x00
+#define PERF_REQ_A15		0x04
+#define PERF_LVL_A7		0x08
+#define PERF_REQ_A7		0x0c
+#define COMMS			0x10
+#define COMMS_REQ		0x14
+#define PWC_STATUS		0x18
+#define PWC_FLAG		0x1c
+
 /* SPC wake-up IRQs status and mask */
 #define WAKE_INT_MASK		0x24
 #define WAKE_INT_RAW		0x28
@@ -36,12 +53,45 @@
 #define A15_BX_ADDR0		0x68
 #define A7_BX_ADDR0		0x78
 
+/* SPC system config interface registers */
+#define SYSCFG_WDATA		0x70
+#define SYSCFG_RDATA		0x74
+
+/* A15/A7 OPP virtual register base */
+#define A15_PERFVAL_BASE	0xC10
+#define A7_PERFVAL_BASE		0xC30
+
+/* Config interface control bits */
+#define SYSCFG_START		(1 << 31)
+#define SYSCFG_SCC		(6 << 20)
+#define SYSCFG_STAT		(14 << 20)
+
 /* wake-up interrupt masks */
 #define GBL_WAKEUP_INT_MSK	(0x3 << 10)
 
 /* TC2 static dual-cluster configuration */
 #define MAX_CLUSTERS		2
 
+/*
+ * Even though the SPC takes max 3-5 ms to complete any OPP/COMMS
+ * operation, the operation could start just before jiffie is about
+ * to be incremented. So setting timeout value of 20ms = 2jiffies@100Hz
+ */
+#define TIMEOUT_US	20000
+
+#define MAX_OPPS	8
+#define CA15_DVFS	0
+#define CA7_DVFS	1
+#define SPC_SYS_CFG	2
+#define STAT_COMPLETE(type)	((1 << 0) << (type << 2))
+#define STAT_ERR(type)		((1 << 1) << (type << 2))
+#define RESPONSE_MASK(type)	(STAT_COMPLETE(type) | STAT_ERR(type))
+
+struct ve_spc_opp {
+	unsigned long freq;
+	unsigned long u_volt;
+};
+
 struct ve_spc_drvdata {
 	void __iomem *baseaddr;
 	/*
@@ -49,6 +99,12 @@ struct ve_spc_drvdata {
 	 * It corresponds to A15 processors MPIDR[15:8] bitfield
 	 */
 	u32 a15_clusid;
+	uint32_t cur_rsp_mask;
+	uint32_t cur_rsp_stat;
+	struct semaphore sem;
+	struct completion done;
+	struct ve_spc_opp *opps[MAX_CLUSTERS];
+	int num_opps[MAX_CLUSTERS];
 };
 
 static struct ve_spc_drvdata *info;
@@ -157,8 +213,197 @@ void ve_spc_powerdown(u32 cluster, bool enable)
 	writel_relaxed(enable, info->baseaddr + pwdrn_reg);
 }
 
-int __init ve_spc_init(void __iomem *baseaddr, u32 a15_clusid)
+static int ve_spc_get_performance(int cluster, u32 *freq)
+{
+	struct ve_spc_opp *opps = info->opps[cluster];
+	u32 perf_cfg_reg = 0;
+	u32 perf;
+
+	perf_cfg_reg = cluster_is_a15(cluster) ? PERF_LVL_A15 : PERF_LVL_A7;
+
+	perf = readl_relaxed(info->baseaddr + perf_cfg_reg);
+	if (perf >= info->num_opps[cluster])
+		return -EINVAL;
+
+	opps += perf;
+	*freq = opps->freq;
+
+	return 0;
+}
+
+/* find closest match to given frequency in OPP table */
+static int ve_spc_round_performance(int cluster, u32 freq)
+{
+	int idx, max_opp = info->num_opps[cluster];
+	struct ve_spc_opp *opps = info->opps[cluster];
+	u32 fmin = 0, fmax = ~0, ftmp;
+
+	freq /= 1000; /* OPP entries in kHz */
+	for (idx = 0; idx < max_opp; idx++, opps++) {
+		ftmp = opps->freq;
+		if (ftmp >= freq) {
+			if (ftmp <= fmax)
+				fmax = ftmp;
+		} else {
+			if (ftmp >= fmin)
+				fmin = ftmp;
+		}
+	}
+	if (fmax != ~0)
+		return fmax * 1000;
+	else
+		return fmin * 1000;
+}
+
+static int ve_spc_find_performance_index(int cluster, u32 freq)
+{
+	int idx, max_opp = info->num_opps[cluster];
+	struct ve_spc_opp *opps = info->opps[cluster];
+
+	for (idx = 0; idx < max_opp; idx++, opps++)
+		if (opps->freq == freq)
+			break;
+	return (idx == max_opp) ? -EINVAL : idx;
+}
+
+static int ve_spc_waitforcompletion(int req_type)
+{
+	int ret = wait_for_completion_interruptible_timeout(
+			&info->done, usecs_to_jiffies(TIMEOUT_US));
+	if (ret == 0)
+		ret = -ETIMEDOUT;
+	else if (ret > 0)
+		ret = info->cur_rsp_stat & STAT_COMPLETE(req_type) ? 0 : -EIO;
+	return ret;
+}
+
+static int ve_spc_set_performance(int cluster, u32 freq)
+{
+	u32 perf_cfg_reg, perf_stat_reg;
+	int ret, perf, req_type;
+
+	if (cluster_is_a15(cluster)) {
+		req_type = CA15_DVFS;
+		perf_cfg_reg = PERF_LVL_A15;
+		perf_stat_reg = PERF_REQ_A15;
+	} else {
+		req_type = CA7_DVFS;
+		perf_cfg_reg = PERF_LVL_A7;
+		perf_stat_reg = PERF_REQ_A7;
+	}
+
+	perf = ve_spc_find_performance_index(cluster, freq);
+
+	if (perf < 0)
+		return perf;
+
+	if (down_timeout(&info->sem, usecs_to_jiffies(TIMEOUT_US)))
+		return -ETIME;
+
+	init_completion(&info->done);
+	info->cur_rsp_mask = RESPONSE_MASK(req_type);
+
+	writel(perf, info->baseaddr + perf_cfg_reg);
+	ret = ve_spc_waitforcompletion(req_type);
+
+	info->cur_rsp_mask = 0;
+	up(&info->sem);
+
+	return ret;
+}
+
+static int ve_spc_read_sys_cfg(int func, int offset, uint32_t *data)
+{
+	int ret;
+
+	if (down_timeout(&info->sem, usecs_to_jiffies(TIMEOUT_US)))
+		return -ETIME;
+
+	init_completion(&info->done);
+	info->cur_rsp_mask = RESPONSE_MASK(SPC_SYS_CFG);
+
+	/* Set the control value */
+	writel(SYSCFG_START | func | offset >> 2, info->baseaddr + COMMS);
+	ret = ve_spc_waitforcompletion(SPC_SYS_CFG);
+
+	if (ret == 0)
+		*data = readl(info->baseaddr + SYSCFG_RDATA);
+
+	info->cur_rsp_mask = 0;
+	up(&info->sem);
+
+	return ret;
+}
+
+static irqreturn_t ve_spc_irq_handler(int irq, void *data)
+{
+	struct ve_spc_drvdata *drv_data = data;
+	uint32_t status = readl_relaxed(drv_data->baseaddr + PWC_STATUS);
+
+	if (info->cur_rsp_mask & status) {
+		info->cur_rsp_stat = status;
+		complete(&drv_data->done);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*
+ *  +--------------------------+
+ *  | 31      20 | 19        0 |
+ *  +--------------------------+
+ *  |   u_volt   |  freq(kHz)  |
+ *  +--------------------------+
+ */
+#define MULT_FACTOR	20
+#define VOLT_SHIFT	20
+#define FREQ_MASK	(0xFFFFF)
+static int ve_spc_populate_opps(uint32_t cluster)
 {
+	uint32_t data = 0, off, ret, idx;
+	struct ve_spc_opp *opps;
+
+	opps = kzalloc(sizeof(*opps) * MAX_OPPS, GFP_KERNEL);
+	if (!opps)
+		return -ENOMEM;
+
+	info->opps[cluster] = opps;
+
+	off = cluster_is_a15(cluster) ? A15_PERFVAL_BASE : A7_PERFVAL_BASE;
+	for (idx = 0; idx < MAX_OPPS; idx++, off += 4, opps++) {
+		ret = ve_spc_read_sys_cfg(SYSCFG_SCC, off, &data);
+		if (!ret) {
+			opps->freq = (data & FREQ_MASK) * MULT_FACTOR;
+			opps->u_volt = data >> VOLT_SHIFT;
+		} else {
+			break;
+		}
+	}
+	info->num_opps[cluster] = idx;
+
+	return ret;
+}
+
+static int ve_init_opp_table(struct device *cpu_dev)
+{
+	int cluster = topology_physical_package_id(cpu_dev->id);
+	int idx, ret = 0, max_opp = info->num_opps[cluster];
+	struct ve_spc_opp *opps = info->opps[cluster];
+
+	for (idx = 0; idx < max_opp; idx++, opps++) {
+		ret = dev_pm_opp_add(cpu_dev, opps->freq * 1000, opps->u_volt);
+		if (ret) {
+			dev_warn(cpu_dev, "failed to add opp %lu %lu\n",
+				 opps->freq, opps->u_volt);
+			return ret;
+		}
+	}
+	return ret;
+}
+
+int __init ve_spc_init(void __iomem *baseaddr, u32 a15_clusid, int irq)
+{
+	int ret;
 	info = kzalloc(sizeof(*info), GFP_KERNEL);
 	if (!info) {
 		pr_err(SPCLOG "unable to allocate mem\n");
@@ -168,6 +413,25 @@ int __init ve_spc_init(void __iomem *baseaddr, u32 a15_clusid)
 	info->baseaddr = baseaddr;
 	info->a15_clusid = a15_clusid;
 
+	if (irq <= 0) {
+		pr_err(SPCLOG "Invalid IRQ %d\n", irq);
+		kfree(info);
+		return -EINVAL;
+	}
+
+	init_completion(&info->done);
+
+	readl_relaxed(info->baseaddr + PWC_STATUS);
+
+	ret = request_irq(irq, ve_spc_irq_handler, IRQF_TRIGGER_HIGH
+				| IRQF_ONESHOT, "vexpress-spc", info);
+	if (ret) {
+		pr_err(SPCLOG "IRQ %d request failed\n", irq);
+		kfree(info);
+		return -ENODEV;
+	}
+
+	sema_init(&info->sem, 1);
 	/*
 	 * Multi-cluster systems may need this data when non-coherent, during
 	 * cluster power-up/power-down. Make sure driver info reaches main
@@ -178,3 +442,103 @@ int __init ve_spc_init(void __iomem *baseaddr, u32 a15_clusid)
 
 	return 0;
 }
+
+struct clk_spc {
+	struct clk_hw hw;
+	int cluster;
+};
+
+#define to_clk_spc(spc) container_of(spc, struct clk_spc, hw)
+static unsigned long spc_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct clk_spc *spc = to_clk_spc(hw);
+	u32 freq;
+
+	if (ve_spc_get_performance(spc->cluster, &freq))
+		return -EIO;
+
+	return freq * 1000;
+}
+
+static long spc_round_rate(struct clk_hw *hw, unsigned long drate,
+		unsigned long *parent_rate)
+{
+	struct clk_spc *spc = to_clk_spc(hw);
+
+	return ve_spc_round_performance(spc->cluster, drate);
+}
+
+static int spc_set_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate)
+{
+	struct clk_spc *spc = to_clk_spc(hw);
+
+	return ve_spc_set_performance(spc->cluster, rate / 1000);
+}
+
+static struct clk_ops clk_spc_ops = {
+	.recalc_rate = spc_recalc_rate,
+	.round_rate = spc_round_rate,
+	.set_rate = spc_set_rate,
+};
+
+static struct clk *ve_spc_clk_register(struct device *cpu_dev)
+{
+	struct clk_init_data init;
+	struct clk_spc *spc;
+
+	spc = kzalloc(sizeof(*spc), GFP_KERNEL);
+	if (!spc) {
+		pr_err("could not allocate spc clk\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	spc->hw.init = &init;
+	spc->cluster = topology_physical_package_id(cpu_dev->id);
+
+	init.name = dev_name(cpu_dev);
+	init.ops = &clk_spc_ops;
+	init.flags = CLK_IS_ROOT | CLK_GET_RATE_NOCACHE;
+	init.num_parents = 0;
+
+	return devm_clk_register(cpu_dev, &spc->hw);
+}
+
+static int __init ve_spc_clk_init(void)
+{
+	int cpu;
+	struct clk *clk;
+
+	if (!info)
+		return 0; /* Continue only if SPC is initialised */
+
+	if (ve_spc_populate_opps(0) || ve_spc_populate_opps(1)) {
+		pr_err("failed to build OPP table\n");
+		return -ENODEV;
+	}
+
+	for_each_possible_cpu(cpu) {
+		struct device *cpu_dev = get_cpu_device(cpu);
+		if (!cpu_dev) {
+			pr_warn("failed to get cpu%d device\n", cpu);
+			continue;
+		}
+		clk = ve_spc_clk_register(cpu_dev);
+		if (IS_ERR(clk)) {
+			pr_warn("failed to register cpu%d clock\n", cpu);
+			continue;
+		}
+		if (clk_register_clkdev(clk, NULL, dev_name(cpu_dev))) {
+			pr_warn("failed to register cpu%d clock lookup\n", cpu);
+			continue;
+		}
+
+		if (ve_init_opp_table(cpu_dev))
+			pr_warn("failed to initialise cpu%d opp table\n", cpu);
+	}
+
+	platform_device_register_simple("vexpress-spc-cpufreq", -1, NULL, 0);
+	return 0;
+}
+module_init(ve_spc_clk_init);
diff --git a/arch/arm/mach-vexpress/spc.h b/arch/arm/mach-vexpress/spc.h
index 5f7e4a4..dbd44c3 100644
--- a/arch/arm/mach-vexpress/spc.h
+++ b/arch/arm/mach-vexpress/spc.h
@@ -15,7 +15,7 @@
 #ifndef __SPC_H_
 #define __SPC_H_
 
-int __init ve_spc_init(void __iomem *base, u32 a15_clusid);
+int __init ve_spc_init(void __iomem *base, u32 a15_clusid, int irq);
 void ve_spc_global_wakeup_irq(bool set);
 void ve_spc_cpu_wakeup_irq(u32 cluster, u32 cpu, bool set);
 void ve_spc_set_resume_addr(u32 cluster, u32 cpu, u32 addr);
diff --git a/arch/arm/mach-vexpress/tc2_pm.c b/arch/arm/mach-vexpress/tc2_pm.c
index 4eb92eb..05a364c50 100644
--- a/arch/arm/mach-vexpress/tc2_pm.c
+++ b/arch/arm/mach-vexpress/tc2_pm.c
@@ -16,6 +16,7 @@
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/of_address.h>
+#include <linux/of_irq.h>
 #include <linux/spinlock.h>
 #include <linux/errno.h>
 #include <linux/irqchip/arm-gic.h>
@@ -267,7 +268,7 @@ static void __naked tc2_pm_power_up_setup(unsigned int affinity_level)
 
 static int __init tc2_pm_init(void)
 {
-	int ret;
+	int ret, irq;
 	void __iomem *scc;
 	u32 a15_cluster_id, a7_cluster_id, sys_info;
 	struct device_node *np;
@@ -292,13 +293,15 @@ static int __init tc2_pm_init(void)
 	tc2_nr_cpus[a15_cluster_id] = (sys_info >> 16) & 0xf;
 	tc2_nr_cpus[a7_cluster_id] = (sys_info >> 20) & 0xf;
 
+	irq = irq_of_parse_and_map(np, 0);
+
 	/*
 	 * A subset of the SCC registers is also used to communicate
 	 * with the SPC (power controller). We need to be able to
 	 * drive it very early in the boot process to power up
 	 * processors, so we initialize the SPC driver here.
 	 */
-	ret = ve_spc_init(scc + SPC_BASE, a15_cluster_id);
+	ret = ve_spc_init(scc + SPC_BASE, a15_cluster_id, irq);
 	if (ret)
 		return ret;
 
diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
index 5f25256..9a7bd13 100644
--- a/arch/arm/mach-zynq/common.c
+++ b/arch/arm/mach-zynq/common.c
@@ -44,6 +44,10 @@ static struct of_device_id zynq_of_bus_ids[] __initdata = {
 	{}
 };
 
+static struct platform_device zynq_cpuidle_device = {
+	.name = "cpuidle-zynq",
+};
+
 /**
  * zynq_init_machine - System specific initialization, intended to be
  *		       called from board specific initialization.
@@ -56,6 +60,8 @@ static void __init zynq_init_machine(void)
 	l2x0_of_init(0x02060000, 0xF0F0FFFF);
 
 	of_platform_bus_probe(NULL, zynq_of_bus_ids, NULL);
+
+	platform_device_register(&zynq_cpuidle_device);
 }
 
 static void __init zynq_timer_init(void)
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 74314bd..e887b57 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -1440,7 +1440,6 @@ source "drivers/cpufreq/Kconfig"
 config BFIN_CPU_FREQ
 	bool
 	depends on CPU_FREQ
-	select CPU_FREQ_TABLE
 	default y
 
 config CPU_VOLTAGE
diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig
index 02380be..9c957c8 100644
--- a/arch/cris/Kconfig
+++ b/arch/cris/Kconfig
@@ -130,13 +130,11 @@ config SVINTO_SIM
 
 config ETRAXFS
 	bool "ETRAX-FS-V32"
-	select CPU_FREQ_TABLE if CPU_FREQ
 	help
 	  Support CRIS V32.
 
 config CRIS_MACH_ARTPEC3
         bool "ARTPEC-3"
-	select CPU_FREQ_TABLE if CPU_FREQ
         help
           Support Axis ARTPEC-3.
 
diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c
index 5eb71d2..59d52e3 100644
--- a/arch/ia64/kernel/acpi.c
+++ b/arch/ia64/kernel/acpi.c
@@ -882,40 +882,10 @@ __init void prefill_possible_map(void)
 		set_cpu_possible(i, true);
 }
 
-static int _acpi_map_lsapic(acpi_handle handle, int *pcpu)
+static int _acpi_map_lsapic(acpi_handle handle, int physid, int *pcpu)
 {
-	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
-	union acpi_object *obj;
-	struct acpi_madt_local_sapic *lsapic;
 	cpumask_t tmp_map;
-	int cpu, physid;
-
-	if (ACPI_FAILURE(acpi_evaluate_object(handle, "_MAT", NULL, &buffer)))
-		return -EINVAL;
-
-	if (!buffer.length || !buffer.pointer)
-		return -EINVAL;
-
-	obj = buffer.pointer;
-	if (obj->type != ACPI_TYPE_BUFFER)
-	{
-		kfree(buffer.pointer);
-		return -EINVAL;
-	}
-
-	lsapic = (struct acpi_madt_local_sapic *)obj->buffer.pointer;
-
-	if ((lsapic->header.type != ACPI_MADT_TYPE_LOCAL_SAPIC) ||
-	    (!(lsapic->lapic_flags & ACPI_MADT_ENABLED))) {
-		kfree(buffer.pointer);
-		return -EINVAL;
-	}
-
-	physid = ((lsapic->id << 8) | (lsapic->eid));
-
-	kfree(buffer.pointer);
-	buffer.length = ACPI_ALLOCATE_BUFFER;
-	buffer.pointer = NULL;
+	int cpu;
 
 	cpumask_complement(&tmp_map, cpu_present_mask);
 	cpu = cpumask_first(&tmp_map);
@@ -934,9 +904,9 @@ static int _acpi_map_lsapic(acpi_handle handle, int *pcpu)
 }
 
 /* wrapper to silence section mismatch warning */
-int __ref acpi_map_lsapic(acpi_handle handle, int *pcpu)
+int __ref acpi_map_lsapic(acpi_handle handle, int physid, int *pcpu)
 {
-	return _acpi_map_lsapic(handle, pcpu);
+	return _acpi_map_lsapic(handle, physid, pcpu);
 }
 EXPORT_SYMBOL(acpi_map_lsapic);
 
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 8e59abc..930cd8a 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -844,18 +844,6 @@ void __cpu_die(unsigned int cpu)
 		smp_ops->cpu_die(cpu);
 }
 
-static DEFINE_MUTEX(powerpc_cpu_hotplug_driver_mutex);
-
-void cpu_hotplug_driver_lock()
-{
-	mutex_lock(&powerpc_cpu_hotplug_driver_mutex);
-}
-
-void cpu_hotplug_driver_unlock()
-{
-	mutex_unlock(&powerpc_cpu_hotplug_driver_mutex);
-}
-
 void cpu_die(void)
 {
 	if (ppc_md.cpu_die)
diff --git a/arch/powerpc/platforms/pseries/dlpar.c b/arch/powerpc/platforms/pseries/dlpar.c
index 7cfdaae..a8fe5aa 100644
--- a/arch/powerpc/platforms/pseries/dlpar.c
+++ b/arch/powerpc/platforms/pseries/dlpar.c
@@ -404,46 +404,38 @@ static ssize_t dlpar_cpu_probe(const char *buf, size_t count)
 	unsigned long drc_index;
 	int rc;
 
-	cpu_hotplug_driver_lock();
 	rc = strict_strtoul(buf, 0, &drc_index);
-	if (rc) {
-		rc = -EINVAL;
-		goto out;
-	}
+	if (rc)
+		return -EINVAL;
 
 	parent = of_find_node_by_path("/cpus");
-	if (!parent) {
-		rc = -ENODEV;
-		goto out;
-	}
+	if (!parent)
+		return -ENODEV;
 
 	dn = dlpar_configure_connector(drc_index, parent);
-	if (!dn) {
-		rc = -EINVAL;
-		goto out;
-	}
+	if (!dn)
+		return -EINVAL;
 
 	of_node_put(parent);
 
 	rc = dlpar_acquire_drc(drc_index);
 	if (rc) {
 		dlpar_free_cc_nodes(dn);
-		rc = -EINVAL;
-		goto out;
+		return -EINVAL;
 	}
 
 	rc = dlpar_attach_node(dn);
 	if (rc) {
 		dlpar_release_drc(drc_index);
 		dlpar_free_cc_nodes(dn);
-		goto out;
+		return rc;
 	}
 
 	rc = dlpar_online_cpu(dn);
-out:
-	cpu_hotplug_driver_unlock();
+	if (rc)
+		return rc;
 
-	return rc ? rc : count;
+	return count;
 }
 
 static int dlpar_offline_cpu(struct device_node *dn)
@@ -516,30 +508,27 @@ static ssize_t dlpar_cpu_release(const char *buf, size_t count)
 		return -EINVAL;
 	}
 
-	cpu_hotplug_driver_lock();
 	rc = dlpar_offline_cpu(dn);
 	if (rc) {
 		of_node_put(dn);
-		rc = -EINVAL;
-		goto out;
+		return -EINVAL;
 	}
 
 	rc = dlpar_release_drc(*drc_index);
 	if (rc) {
 		of_node_put(dn);
-		goto out;
+		return rc;
 	}
 
 	rc = dlpar_detach_node(dn);
 	if (rc) {
 		dlpar_acquire_drc(*drc_index);
-		goto out;
+		return rc;
 	}
 
 	of_node_put(dn);
-out:
-	cpu_hotplug_driver_unlock();
-	return rc ? rc : count;
+
+	return count;
 }
 
 static int __init pseries_dlpar_init(void)
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 725e157..14dc9c7 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -255,10 +255,6 @@ config ARCH_HWEIGHT_CFLAGS
 	default "-fcall-saved-ecx -fcall-saved-edx" if X86_32
 	default "-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11" if X86_64
 
-config ARCH_CPU_PROBE_RELEASE
-	def_bool y
-	depends on HOTPLUG_CPU
-
 config ARCH_SUPPORTS_UPROBES
 	def_bool y
 
diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h
index b1977ba..c8c1e70 100644
--- a/arch/x86/include/asm/acpi.h
+++ b/arch/x86/include/asm/acpi.h
@@ -26,6 +26,7 @@
 #include <acpi/pdc_intel.h>
 
 #include <asm/numa.h>
+#include <asm/fixmap.h>
 #include <asm/processor.h>
 #include <asm/mmu.h>
 #include <asm/mpspec.h>
diff --git a/arch/x86/include/asm/mpspec.h b/arch/x86/include/asm/mpspec.h
index 626cf70..3142a94 100644
--- a/arch/x86/include/asm/mpspec.h
+++ b/arch/x86/include/asm/mpspec.h
@@ -94,7 +94,7 @@ static inline void early_reserve_e820_mpc_new(void) { }
 #define default_get_smp_config x86_init_uint_noop
 #endif
 
-void generic_processor_info(int apicid, int version);
+int generic_processor_info(int apicid, int version);
 #ifdef CONFIG_ACPI
 extern void mp_register_ioapic(int id, u32 address, u32 gsi_base);
 extern void mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger,
diff --git a/arch/x86/include/asm/msr.h b/arch/x86/include/asm/msr.h
index cb75028..e139b13 100644
--- a/arch/x86/include/asm/msr.h
+++ b/arch/x86/include/asm/msr.h
@@ -218,10 +218,14 @@ void msrs_free(struct msr *msrs);
 #ifdef CONFIG_SMP
 int rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h);
 int wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h);
+int rdmsrl_on_cpu(unsigned int cpu, u32 msr_no, u64 *q);
+int wrmsrl_on_cpu(unsigned int cpu, u32 msr_no, u64 q);
 void rdmsr_on_cpus(const struct cpumask *mask, u32 msr_no, struct msr *msrs);
 void wrmsr_on_cpus(const struct cpumask *mask, u32 msr_no, struct msr *msrs);
 int rdmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h);
 int wrmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h);
+int rdmsrl_safe_on_cpu(unsigned int cpu, u32 msr_no, u64 *q);
+int wrmsrl_safe_on_cpu(unsigned int cpu, u32 msr_no, u64 q);
 int rdmsr_safe_regs_on_cpu(unsigned int cpu, u32 regs[8]);
 int wrmsr_safe_regs_on_cpu(unsigned int cpu, u32 regs[8]);
 #else  /*  CONFIG_SMP  */
@@ -235,6 +239,16 @@ static inline int wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
 	wrmsr(msr_no, l, h);
 	return 0;
 }
+static inline int rdmsrl_on_cpu(unsigned int cpu, u32 msr_no, u64 *q)
+{
+	rdmsrl(msr_no, *q);
+	return 0;
+}
+static inline int wrmsrl_on_cpu(unsigned int cpu, u32 msr_no, u64 q)
+{
+	wrmsrl(msr_no, q);
+	return 0;
+}
 static inline void rdmsr_on_cpus(const struct cpumask *m, u32 msr_no,
 				struct msr *msrs)
 {
@@ -254,6 +268,14 @@ static inline int wrmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
 {
 	return wrmsr_safe(msr_no, l, h);
 }
+static inline int rdmsrl_safe_on_cpu(unsigned int cpu, u32 msr_no, u64 *q)
+{
+	return rdmsrl_safe(msr_no, q);
+}
+static inline int wrmsrl_safe_on_cpu(unsigned int cpu, u32 msr_no, u64 q)
+{
+	return wrmsrl_safe(msr_no, q);
+}
 static inline int rdmsr_safe_regs_on_cpu(unsigned int cpu, u32 regs[8])
 {
 	return rdmsr_safe_regs(regs);
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 40c7660..6c0b43b 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -189,24 +189,31 @@ static int __init acpi_parse_madt(struct acpi_table_header *table)
 	return 0;
 }
 
-static void acpi_register_lapic(int id, u8 enabled)
+/**
+ * acpi_register_lapic - register a local apic and generates a logic cpu number
+ * @id: local apic id to register
+ * @enabled: this cpu is enabled or not
+ *
+ * Returns the logic cpu number which maps to the local apic
+ */
+static int acpi_register_lapic(int id, u8 enabled)
 {
 	unsigned int ver = 0;
 
 	if (id >= MAX_LOCAL_APIC) {
 		printk(KERN_INFO PREFIX "skipped apicid that is too big\n");
-		return;
+		return -EINVAL;
 	}
 
 	if (!enabled) {
 		++disabled_cpus;
-		return;
+		return -EINVAL;
 	}
 
 	if (boot_cpu_physical_apicid != -1U)
 		ver = apic_version[boot_cpu_physical_apicid];
 
-	generic_processor_info(id, ver);
+	return generic_processor_info(id, ver);
 }
 
 static int __init
@@ -614,84 +621,27 @@ static void acpi_map_cpu2node(acpi_handle handle, int cpu, int physid)
 #endif
 }
 
-static int _acpi_map_lsapic(acpi_handle handle, int *pcpu)
+static int _acpi_map_lsapic(acpi_handle handle, int physid, int *pcpu)
 {
-	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
-	union acpi_object *obj;
-	struct acpi_madt_local_apic *lapic;
-	cpumask_var_t tmp_map, new_map;
-	u8 physid;
 	int cpu;
-	int retval = -ENOMEM;
-
-	if (ACPI_FAILURE(acpi_evaluate_object(handle, "_MAT", NULL, &buffer)))
-		return -EINVAL;
-
-	if (!buffer.length || !buffer.pointer)
-		return -EINVAL;
-
-	obj = buffer.pointer;
-	if (obj->type != ACPI_TYPE_BUFFER ||
-	    obj->buffer.length < sizeof(*lapic)) {
-		kfree(buffer.pointer);
-		return -EINVAL;
-	}
 
-	lapic = (struct acpi_madt_local_apic *)obj->buffer.pointer;
-
-	if (lapic->header.type != ACPI_MADT_TYPE_LOCAL_APIC ||
-	    !(lapic->lapic_flags & ACPI_MADT_ENABLED)) {
-		kfree(buffer.pointer);
-		return -EINVAL;
-	}
-
-	physid = lapic->id;
-
-	kfree(buffer.pointer);
-	buffer.length = ACPI_ALLOCATE_BUFFER;
-	buffer.pointer = NULL;
-	lapic = NULL;
-
-	if (!alloc_cpumask_var(&tmp_map, GFP_KERNEL))
-		goto out;
-
-	if (!alloc_cpumask_var(&new_map, GFP_KERNEL))
-		goto free_tmp_map;
-
-	cpumask_copy(tmp_map, cpu_present_mask);
-	acpi_register_lapic(physid, ACPI_MADT_ENABLED);
-
-	/*
-	 * If acpi_register_lapic successfully generates a new logical cpu
-	 * number, then the following will get us exactly what was mapped
-	 */
-	cpumask_andnot(new_map, cpu_present_mask, tmp_map);
-	if (cpumask_empty(new_map)) {
-		printk ("Unable to map lapic to logical cpu number\n");
-		retval = -EINVAL;
-		goto free_new_map;
+	cpu = acpi_register_lapic(physid, ACPI_MADT_ENABLED);
+	if (cpu < 0) {
+		pr_info(PREFIX "Unable to map lapic to logical cpu number\n");
+		return cpu;
 	}
 
 	acpi_processor_set_pdc(handle);
-
-	cpu = cpumask_first(new_map);
 	acpi_map_cpu2node(handle, cpu, physid);
 
 	*pcpu = cpu;
-	retval = 0;
-
-free_new_map:
-	free_cpumask_var(new_map);
-free_tmp_map:
-	free_cpumask_var(tmp_map);
-out:
-	return retval;
+	return 0;
 }
 
 /* wrapper to silence section mismatch warning */
-int __ref acpi_map_lsapic(acpi_handle handle, int *pcpu)
+int __ref acpi_map_lsapic(acpi_handle handle, int physid, int *pcpu)
 {
-	return _acpi_map_lsapic(handle, pcpu);
+	return _acpi_map_lsapic(handle, physid, pcpu);
 }
 EXPORT_SYMBOL(acpi_map_lsapic);
 
@@ -745,7 +695,7 @@ static int __init acpi_parse_sbf(struct acpi_table_header *table)
 #ifdef CONFIG_HPET_TIMER
 #include <asm/hpet.h>
 
-static struct __initdata resource *hpet_res;
+static struct resource *hpet_res __initdata;
 
 static int __init acpi_parse_hpet(struct acpi_table_header *table)
 {
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index 3312010..3a2ae4c 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -26,6 +26,17 @@ static char temp_stack[4096];
 #endif
 
 /**
+ * x86_acpi_enter_sleep_state - enter sleep state
+ * @state: Sleep state to enter.
+ *
+ * Wrapper around acpi_enter_sleep_state() to be called by assmebly.
+ */
+acpi_status asmlinkage x86_acpi_enter_sleep_state(u8 state)
+{
+	return acpi_enter_sleep_state(state);
+}
+
+/**
  * x86_acpi_suspend_lowlevel - save kernel state
  *
  * Create an identity mapped page table and copy the wakeup routine to
diff --git a/arch/x86/kernel/acpi/sleep.h b/arch/x86/kernel/acpi/sleep.h
index c9c2c98..65c7b60 100644
--- a/arch/x86/kernel/acpi/sleep.h
+++ b/arch/x86/kernel/acpi/sleep.h
@@ -17,3 +17,5 @@ extern void wakeup_long64(void);
 extern void do_suspend_lowlevel(void);
 
 extern int x86_acpi_suspend_lowlevel(void);
+
+acpi_status asmlinkage x86_acpi_enter_sleep_state(u8 state);
diff --git a/arch/x86/kernel/acpi/wakeup_32.S b/arch/x86/kernel/acpi/wakeup_32.S
index d1daa66..665c6b7 100644
--- a/arch/x86/kernel/acpi/wakeup_32.S
+++ b/arch/x86/kernel/acpi/wakeup_32.S
@@ -73,7 +73,7 @@ ENTRY(do_suspend_lowlevel)
 	call	save_processor_state
 	call	save_registers
 	pushl	$3
-	call	acpi_enter_sleep_state
+	call	x86_acpi_enter_sleep_state
 	addl	$4, %esp
 
 #	In case of S3 failure, we'll emerge here.  Jump
diff --git a/arch/x86/kernel/acpi/wakeup_64.S b/arch/x86/kernel/acpi/wakeup_64.S
index 8ea5164..ae693b5 100644
--- a/arch/x86/kernel/acpi/wakeup_64.S
+++ b/arch/x86/kernel/acpi/wakeup_64.S
@@ -73,7 +73,7 @@ ENTRY(do_suspend_lowlevel)
 	addq	$8, %rsp
 	movl	$3, %edi
 	xorl	%eax, %eax
-	call	acpi_enter_sleep_state
+	call	x86_acpi_enter_sleep_state
 	/* in case something went wrong, restore the machine status and go on */
 	jmp	resume_point
 
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index a7eb82d..ed165d6 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -2107,7 +2107,7 @@ void disconnect_bsp_APIC(int virt_wire_setup)
 	apic_write(APIC_LVT1, value);
 }
 
-void generic_processor_info(int apicid, int version)
+int generic_processor_info(int apicid, int version)
 {
 	int cpu, max = nr_cpu_ids;
 	bool boot_cpu_detected = physid_isset(boot_cpu_physical_apicid,
@@ -2127,7 +2127,7 @@ void generic_processor_info(int apicid, int version)
 			"  Processor %d/0x%x ignored.\n", max, thiscpu, apicid);
 
 		disabled_cpus++;
-		return;
+		return -ENODEV;
 	}
 
 	if (num_processors >= nr_cpu_ids) {
@@ -2138,7 +2138,7 @@ void generic_processor_info(int apicid, int version)
 			"  Processor %d/0x%x ignored.\n", max, thiscpu, apicid);
 
 		disabled_cpus++;
-		return;
+		return -EINVAL;
 	}
 
 	num_processors++;
@@ -2183,6 +2183,8 @@ void generic_processor_info(int apicid, int version)
 #endif
 	set_cpu_possible(cpu, true);
 	set_cpu_present(cpu, true);
+
+	return cpu;
 }
 
 int hard_smp_processor_id(void)
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 2a16558..85dc05a 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -81,27 +81,6 @@
 /* State of each CPU */
 DEFINE_PER_CPU(int, cpu_state) = { 0 };
 
-#ifdef CONFIG_HOTPLUG_CPU
-/*
- * We need this for trampoline_base protection from concurrent accesses when
- * off- and onlining cores wildly.
- */
-static DEFINE_MUTEX(x86_cpu_hotplug_driver_mutex);
-
-void cpu_hotplug_driver_lock(void)
-{
-	mutex_lock(&x86_cpu_hotplug_driver_mutex);
-}
-
-void cpu_hotplug_driver_unlock(void)
-{
-	mutex_unlock(&x86_cpu_hotplug_driver_mutex);
-}
-
-ssize_t arch_cpu_probe(const char *buf, size_t count) { return -1; }
-ssize_t arch_cpu_release(const char *buf, size_t count) { return -1; }
-#endif
-
 /* Number of siblings per CPU package */
 int smp_num_siblings = 1;
 EXPORT_SYMBOL(smp_num_siblings);
diff --git a/arch/x86/kernel/topology.c b/arch/x86/kernel/topology.c
index 6e60b5f..649b010 100644
--- a/arch/x86/kernel/topology.c
+++ b/arch/x86/kernel/topology.c
@@ -65,29 +65,32 @@ int __ref _debug_hotplug_cpu(int cpu, int action)
 	if (!cpu_is_hotpluggable(cpu))
 		return -EINVAL;
 
-	cpu_hotplug_driver_lock();
+	lock_device_hotplug();
 
 	switch (action) {
 	case 0:
 		ret = cpu_down(cpu);
 		if (!ret) {
 			pr_info("CPU %u is now offline\n", cpu);
+			dev->offline = true;
 			kobject_uevent(&dev->kobj, KOBJ_OFFLINE);
 		} else
 			pr_debug("Can't offline CPU%d.\n", cpu);
 		break;
 	case 1:
 		ret = cpu_up(cpu);
-		if (!ret)
+		if (!ret) {
+			dev->offline = false;
 			kobject_uevent(&dev->kobj, KOBJ_ONLINE);
-		else
+		} else {
 			pr_debug("Can't online CPU%d.\n", cpu);
+		}
 		break;
 	default:
 		ret = -EINVAL;
 	}
 
-	cpu_hotplug_driver_unlock();
+	unlock_device_hotplug();
 
 	return ret;
 }
diff --git a/arch/x86/lib/msr-smp.c b/arch/x86/lib/msr-smp.c
index a6b1b86..518532e 100644
--- a/arch/x86/lib/msr-smp.c
+++ b/arch/x86/lib/msr-smp.c
@@ -47,6 +47,21 @@ int rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h)
 }
 EXPORT_SYMBOL(rdmsr_on_cpu);
 
+int rdmsrl_on_cpu(unsigned int cpu, u32 msr_no, u64 *q)
+{
+	int err;
+	struct msr_info rv;
+
+	memset(&rv, 0, sizeof(rv));
+
+	rv.msr_no = msr_no;
+	err = smp_call_function_single(cpu, __rdmsr_on_cpu, &rv, 1);
+	*q = rv.reg.q;
+
+	return err;
+}
+EXPORT_SYMBOL(rdmsrl_on_cpu);
+
 int wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
 {
 	int err;
@@ -63,6 +78,22 @@ int wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
 }
 EXPORT_SYMBOL(wrmsr_on_cpu);
 
+int wrmsrl_on_cpu(unsigned int cpu, u32 msr_no, u64 q)
+{
+	int err;
+	struct msr_info rv;
+
+	memset(&rv, 0, sizeof(rv));
+
+	rv.msr_no = msr_no;
+	rv.reg.q = q;
+
+	err = smp_call_function_single(cpu, __wrmsr_on_cpu, &rv, 1);
+
+	return err;
+}
+EXPORT_SYMBOL(wrmsrl_on_cpu);
+
 static void __rwmsr_on_cpus(const struct cpumask *mask, u32 msr_no,
 			    struct msr *msrs,
 			    void (*msr_func) (void *info))
@@ -159,6 +190,37 @@ int wrmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
 }
 EXPORT_SYMBOL(wrmsr_safe_on_cpu);
 
+int wrmsrl_safe_on_cpu(unsigned int cpu, u32 msr_no, u64 q)
+{
+	int err;
+	struct msr_info rv;
+
+	memset(&rv, 0, sizeof(rv));
+
+	rv.msr_no = msr_no;
+	rv.reg.q = q;
+
+	err = smp_call_function_single(cpu, __wrmsr_safe_on_cpu, &rv, 1);
+
+	return err ? err : rv.err;
+}
+EXPORT_SYMBOL(wrmsrl_safe_on_cpu);
+
+int rdmsrl_safe_on_cpu(unsigned int cpu, u32 msr_no, u64 *q)
+{
+	int err;
+	struct msr_info rv;
+
+	memset(&rv, 0, sizeof(rv));
+
+	rv.msr_no = msr_no;
+	err = smp_call_function_single(cpu, __rdmsr_safe_on_cpu, &rv, 1);
+	*q = rv.reg.q;
+
+	return err ? err : rv.err;
+}
+EXPORT_SYMBOL(rdmsrl_safe_on_cpu);
+
 /*
  * These variants are significantly slower, but allows control over
  * the entire 32-bit GPR set.
diff --git a/arch/x86/platform/olpc/olpc-xo15-sci.c b/arch/x86/platform/olpc/olpc-xo15-sci.c
index fef7d0b..649a12b 100644
--- a/arch/x86/platform/olpc/olpc-xo15-sci.c
+++ b/arch/x86/platform/olpc/olpc-xo15-sci.c
@@ -40,16 +40,9 @@ static bool				lid_wake_on_close;
  */
 static int set_lid_wake_behavior(bool wake_on_close)
 {
-	struct acpi_object_list arg_list;
-	union acpi_object arg;
 	acpi_status status;
 
-	arg_list.count		= 1;
-	arg_list.pointer	= &arg;
-	arg.type		= ACPI_TYPE_INTEGER;
-	arg.integer.value	= wake_on_close;
-
-	status = acpi_evaluate_object(NULL, "\\_SB.PCI0.LID.LIDW", &arg_list, NULL);
+	status = acpi_execute_simple_method(NULL, "\\_SB.PCI0.LID.LIDW", wake_on_close);
 	if (ACPI_FAILURE(status)) {
 		pr_warning(PFX "failed to set lid behavior\n");
 		return 1;