diff options
author | Kirill A. Shutemov <kirill.shutemov@linux.intel.com> | 2017-06-06 14:31:25 +0300 |
---|---|---|
committer | Ingo Molnar <mingo@kernel.org> | 2017-06-13 08:56:53 +0200 |
commit | 34bbb0009f3b7a5eef1ab34f14e5dbf7b8fc389c (patch) | |
tree | e05b4b64ec0d1abfed2917f536df77d8ba94c8cf /arch | |
parent | 919a02d1280a3845bac70e6b7891ca070f21a60a (diff) | |
download | op-kernel-dev-34bbb0009f3b7a5eef1ab34f14e5dbf7b8fc389c.zip op-kernel-dev-34bbb0009f3b7a5eef1ab34f14e5dbf7b8fc389c.tar.gz |
x86/boot/compressed: Enable 5-level paging during decompression stage
We need to cover two basic cases: when bootloader left us in 32-bit mode
and when bootloader enabled long mode.
The patch implements unified codepath to enabled 5-level paging for both
cases. It means case when we start in 32-bit mode, we first enable long
mode with 4-level and then switch over to 5-level paging.
Switching from 4-level to 5-level paging is not trivial. We cannot do it
directly. Setting LA57 in long mode would trigger #GP. So we need to
switch off long mode first and the then re-enable with 5-level paging.
NOTE: The need of switching off long mode means we are in trouble if
bootloader put us above 4G boundary. If bootloader wants to boot 5-level
paging kernel, it has to put kernel below 4G or enable 5-level paging on
it's own, so we could avoid the step.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20170606113133.22974-7-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Diffstat (limited to 'arch')
-rw-r--r-- | arch/x86/boot/compressed/head_64.S | 86 |
1 files changed, 85 insertions, 1 deletions
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S index d2ae1f8..fbf4c32 100644 --- a/arch/x86/boot/compressed/head_64.S +++ b/arch/x86/boot/compressed/head_64.S @@ -346,6 +346,48 @@ preferred_addr: /* Set up the stack */ leaq boot_stack_end(%rbx), %rsp +#ifdef CONFIG_X86_5LEVEL + /* Check if 5-level paging has already enabled */ + movq %cr4, %rax + testl $X86_CR4_LA57, %eax + jnz lvl5 + + /* + * At this point we are in long mode with 4-level paging enabled, + * but we want to enable 5-level paging. + * + * The problem is that we cannot do it directly. Setting LA57 in + * long mode would trigger #GP. So we need to switch off long mode + * first. + * + * NOTE: This is not going to work if bootloader put us above 4G + * limit. + * + * The first step is go into compatibility mode. + */ + + /* Clear additional page table */ + leaq lvl5_pgtable(%rbx), %rdi + xorq %rax, %rax + movq $(PAGE_SIZE/8), %rcx + rep stosq + + /* + * Setup current CR3 as the first and only entry in a new top level + * page table. + */ + movq %cr3, %rdi + leaq 0x7 (%rdi), %rax + movq %rax, lvl5_pgtable(%rbx) + + /* Switch to compatibility mode (CS.L = 0 CS.D = 1) via far return */ + pushq $__KERNEL32_CS + leaq compatible_mode(%rip), %rax + pushq %rax + lretq +lvl5: +#endif + /* Zero EFLAGS */ pushq $0 popfq @@ -429,6 +471,44 @@ relocated: jmp *%rax .code32 +#ifdef CONFIG_X86_5LEVEL +compatible_mode: + /* Setup data and stack segments */ + movl $__KERNEL_DS, %eax + movl %eax, %ds + movl %eax, %ss + + /* Disable paging */ + movl %cr0, %eax + btrl $X86_CR0_PG_BIT, %eax + movl %eax, %cr0 + + /* Point CR3 to 5-level paging */ + leal lvl5_pgtable(%ebx), %eax + movl %eax, %cr3 + + /* Enable PAE and LA57 mode */ + movl %cr4, %eax + orl $(X86_CR4_PAE | X86_CR4_LA57), %eax + movl %eax, %cr4 + + /* Calculate address we are running at */ + call 1f +1: popl %edi + subl $1b, %edi + + /* Prepare stack for far return to Long Mode */ + pushl $__KERNEL_CS + leal lvl5(%edi), %eax + push %eax + + /* Enable paging back */ + movl $(X86_CR0_PG | X86_CR0_PE), %eax + movl %eax, %cr0 + + lret +#endif + no_longmode: /* This isn't an x86-64 CPU so hang */ 1: @@ -442,7 +522,7 @@ gdt: .word gdt_end - gdt .long gdt .word 0 - .quad 0x0000000000000000 /* NULL descriptor */ + .quad 0x00cf9a000000ffff /* __KERNEL32_CS */ .quad 0x00af9a000000ffff /* __KERNEL_CS */ .quad 0x00cf92000000ffff /* __KERNEL_DS */ .quad 0x0080890000000000 /* TS descriptor */ @@ -486,3 +566,7 @@ boot_stack_end: .balign 4096 pgtable: .fill BOOT_PGT_SIZE, 1, 0 +#ifdef CONFIG_X86_5LEVEL +lvl5_pgtable: + .fill PAGE_SIZE, 1, 0 +#endif |