Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc board specific updates from Arnd Bergmann:
 "These changes are all for individual board files.  In the long run,
  those files will largely go away, and the amount of changes appears to
  be continuously decreasing, which is a good sign.  This time around,
  changes are focused on tegra, omap and samsung."

Fix conflicts in arch/arm/mach-{omap2/common-board-devices.c,tegra/Makefile.boot}
as per the 'for-linus' branch.

* tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits)
  ARM: EXYNOS: Add leds status1 and status2 on Origen board
  ARM: S3C64XX: Mark most Cragganmore initdata devinitdata
  ARM: EXYNOS: Add missing .reserve field to SMDKC210
  ARM: EXYNOS: Add DRM device to SMDK4X12 board
  ARM: S3C64XX: Clean up after SPI driver platform data updates
  ARM: SAMSUNG: no need to set the value for clk_xusbxti when it is 24Mhz
  ARM: EXYNOS: Add framebuffer support for SMDK4X12
  ARM: EXYNOS: Add HSOTG support to SMDK4X12
  ARM: S5PV210: Add audio platform device in Goni board
  ARM: S5PV210: Add audio platform device in Aquila board
  ARM: EXYNOS: Add audio platform device in SMDKV310 board
  ARM: S3C64XX: Don't specify an irq_base for WM1192-EV1 board
  ARM: OMAP3: Fix omap3evm randconfig error introduced by VBUS support
  ARM: OMAP: board-omap4panda: MUX configuration for sys_nirq2
  ARM: OMAP: board-4430sdp: MUX configuration for sys_nirq2
  ARM: OMAP3530evm: set pendown_state and debounce time for ads7846
  ARM: omap3evm: enable VBUS switch for EHCI tranceiver
  ARM: OMAP3EVM: Adding USB internal LDOs board file
  ARM: OMAP3EVM: Add NAND flash definition
  ARM: OMAP3: cm-t35: add tvp5150 decoder support
  ...

35 files changed, 584 insertions, 681 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index b163962..dc3de40 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -683,6 +683,7 @@ config ARCH_TEGRA
 	select MIGHT_HAVE_CACHE_L2X0
 	select NEED_MACH_IO_H if PCI
 	select ARCH_HAS_CPUFREQ
+	select USE_OF
 	help
 	  This enables support for NVIDIA Tegra based systems (Tegra APX,
 	  Tegra 6xx and Tegra 2 series).
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 6f6d13f..b5b4c8c 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -207,6 +207,7 @@ config MACH_SMDKV310
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_HSMMC3
+	select S3C_DEV_USB_HSOTG
 	select SAMSUNG_DEV_BACKLIGHT
 	select EXYNOS_DEV_DRM
 	select EXYNOS_DEV_SYSMMU
@@ -326,6 +327,7 @@ config MACH_ORIGEN
 	select S3C_DEV_WDT
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC2
+	select S3C_DEV_USB_HSOTG
 	select S5P_DEV_FIMC0
 	select S5P_DEV_FIMC1
 	select S5P_DEV_FIMC2
@@ -360,22 +362,27 @@ config MACH_SMDK4212
 	select S3C_DEV_I2C3
 	select S3C_DEV_I2C7
 	select S3C_DEV_RTC
+	select S3C_DEV_USB_HSOTG
 	select S3C_DEV_WDT
 	select S5P_DEV_FIMC0
 	select S5P_DEV_FIMC1
 	select S5P_DEV_FIMC2
 	select S5P_DEV_FIMC3
+	select S5P_DEV_FIMD0
 	select S5P_DEV_MFC
 	select SAMSUNG_DEV_BACKLIGHT
 	select SAMSUNG_DEV_KEYPAD
 	select SAMSUNG_DEV_PWM
 	select EXYNOS_DEV_SYSMMU
 	select EXYNOS_DEV_DMA
+	select EXYNOS_DEV_DRM
+	select EXYNOS4_SETUP_FIMD0
 	select EXYNOS4_SETUP_I2C1
 	select EXYNOS4_SETUP_I2C3
 	select EXYNOS4_SETUP_I2C7
 	select EXYNOS4_SETUP_KEYPAD
 	select EXYNOS4_SETUP_SDHCI
+	select EXYNOS4_SETUP_USB_PHY
 	help
 	  Machine support for Samsung SMDK4212
 
diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c
index f3b328d..f98a83a8 100644
--- a/arch/arm/mach-exynos/mach-nuri.c
+++ b/arch/arm/mach-exynos/mach-nuri.c
@@ -1341,9 +1341,8 @@ static struct platform_device *nuri_devices[] __initdata = {
 
 static void __init nuri_map_io(void)
 {
-	clk_xusbxti.rate = 24000000;
 	exynos_init_io(NULL, 0);
-	s3c24xx_init_clocks(24000000);
+	s3c24xx_init_clocks(clk_xusbxti.rate);
 	s3c24xx_init_uarts(nuri_uartcfgs, ARRAY_SIZE(nuri_uartcfgs));
 }
 
diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c
index 873c708..5a12dc2 100644
--- a/arch/arm/mach-exynos/mach-origen.c
+++ b/arch/arm/mach-exynos/mach-origen.c
@@ -9,6 +9,7 @@
 */
 
 #include <linux/serial_core.h>
+#include <linux/leds.h>
 #include <linux/gpio.h>
 #include <linux/mmc/host.h>
 #include <linux/platform_device.h>
@@ -21,6 +22,7 @@
 #include <linux/mfd/max8997.h>
 #include <linux/lcd.h>
 #include <linux/rfkill-gpio.h>
+#include <linux/platform_data/s3c-hsotg.h>
 
 #include <asm/mach/arch.h>
 #include <asm/hardware/gic.h>
@@ -498,6 +500,37 @@ static void __init origen_ohci_init(void)
 	exynos4_ohci_set_platdata(pdata);
 }
 
+/* USB OTG */
+static struct s3c_hsotg_plat origen_hsotg_pdata;
+
+static struct gpio_led origen_gpio_leds[] = {
+	{
+		.name			= "origen::status1",
+		.default_trigger	= "heartbeat",
+		.gpio			= EXYNOS4_GPX1(3),
+		.active_low		= 1,
+	},
+	{
+		.name			= "origen::status2",
+		.default_trigger	= "mmc0",
+		.gpio			= EXYNOS4_GPX1(4),
+		.active_low		= 1,
+	},
+};
+
+static struct gpio_led_platform_data origen_gpio_led_info = {
+	.leds		= origen_gpio_leds,
+	.num_leds	= ARRAY_SIZE(origen_gpio_leds),
+};
+
+static struct platform_device origen_leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &origen_gpio_led_info,
+	},
+};
+
 static struct gpio_keys_button origen_gpio_keys_table[] = {
 	{
 		.code			= KEY_MENU,
@@ -654,6 +687,7 @@ static struct platform_device *origen_devices[] __initdata = {
 	&s3c_device_hsmmc0,
 	&s3c_device_i2c0,
 	&s3c_device_rtc,
+	&s3c_device_usb_hsotg,
 	&s3c_device_wdt,
 	&s5p_device_ehci,
 	&s5p_device_fimc0,
@@ -676,6 +710,7 @@ static struct platform_device *origen_devices[] __initdata = {
 	&exynos4_device_ohci,
 	&origen_device_gpiokeys,
 	&origen_lcd_hv070wsa,
+	&origen_leds_gpio,
 	&origen_device_bluetooth,
 };
 
@@ -711,7 +746,7 @@ static void s5p_tv_setup(void)
 static void __init origen_map_io(void)
 {
 	exynos_init_io(NULL, 0);
-	s3c24xx_init_clocks(24000000);
+	s3c24xx_init_clocks(clk_xusbxti.rate);
 	s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs));
 }
 
@@ -743,7 +778,7 @@ static void __init origen_machine_init(void)
 
 	origen_ehci_init();
 	origen_ohci_init();
-	clk_xusbxti.rate = 24000000;
+	s3c_hsotg_set_platdata(&origen_hsotg_pdata);
 
 	s5p_tv_setup();
 	s5p_i2c_hdmiphy_set_platdata(NULL);
diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c b/arch/arm/mach-exynos/mach-smdk4x12.c
index fb09c70..b26beb1 100644
--- a/arch/arm/mach-exynos/mach-smdk4x12.c
+++ b/arch/arm/mach-exynos/mach-smdk4x12.c
@@ -13,12 +13,14 @@
 #include <linux/i2c.h>
 #include <linux/input.h>
 #include <linux/io.h>
+#include <linux/lcd.h>
 #include <linux/mfd/max8997.h>
 #include <linux/mmc/host.h>
 #include <linux/platform_device.h>
 #include <linux/pwm_backlight.h>
 #include <linux/regulator/machine.h>
 #include <linux/serial_core.h>
+#include <linux/platform_data/s3c-hsotg.h>
 
 #include <asm/mach/arch.h>
 #include <asm/hardware/gic.h>
@@ -28,15 +30,18 @@
 #include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
+#include <plat/fb.h>
 #include <plat/gpio-cfg.h>
 #include <plat/iic.h>
 #include <plat/keypad.h>
 #include <plat/mfc.h>
+#include <plat/regs-fb.h>
 #include <plat/regs-serial.h>
 #include <plat/sdhci.h>
 
 #include <mach/map.h>
 
+#include <drm/exynos_drm.h>
 #include "common.h"
 
 /* Following are default values for UCON, ULCON and UFCON UART registers */
@@ -219,8 +224,10 @@ static struct platform_pwm_backlight_data smdk4x12_bl_data = {
 
 static uint32_t smdk4x12_keymap[] __initdata = {
 	/* KEY(row, col, keycode) */
-	KEY(1, 0, KEY_D), KEY(1, 1, KEY_A), KEY(1, 2, KEY_B),
-	KEY(1, 3, KEY_E), KEY(1, 4, KEY_C)
+	KEY(1, 3, KEY_1), KEY(1, 4, KEY_2), KEY(1, 5, KEY_3),
+	KEY(1, 6, KEY_4), KEY(1, 7, KEY_5),
+	KEY(2, 5, KEY_D), KEY(2, 6, KEY_A), KEY(2, 7, KEY_B),
+	KEY(0, 7, KEY_E), KEY(0, 5, KEY_C)
 };
 
 static struct matrix_keymap_data smdk4x12_keymap_data __initdata = {
@@ -230,10 +237,62 @@ static struct matrix_keymap_data smdk4x12_keymap_data __initdata = {
 
 static struct samsung_keypad_platdata smdk4x12_keypad_data __initdata = {
 	.keymap_data	= &smdk4x12_keymap_data,
-	.rows		= 2,
-	.cols		= 5,
+	.rows		= 3,
+	.cols		= 8,
 };
 
+#ifdef CONFIG_DRM_EXYNOS
+static struct exynos_drm_fimd_pdata drm_fimd_pdata = {
+	.panel	= {
+		.timing	= {
+			.left_margin	= 8,
+			.right_margin	= 8,
+			.upper_margin	= 6,
+			.lower_margin	= 6,
+			.hsync_len	= 6,
+			.vsync_len	= 4,
+			.xres		= 480,
+			.yres		= 800,
+		},
+	},
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	.default_win	= 0,
+	.bpp		= 32,
+};
+#else
+static struct s3c_fb_pd_win smdk4x12_fb_win0 = {
+	.xres		= 480,
+	.yres		= 800,
+	.virtual_x	= 480,
+	.virtual_y	= 800 * 2,
+	.max_bpp	= 32,
+	.default_bpp	= 24,
+};
+
+static struct fb_videomode smdk4x12_lcd_timing = {
+	.left_margin	= 8,
+	.right_margin	= 8,
+	.upper_margin	= 6,
+	.lower_margin	= 6,
+	.hsync_len	= 6,
+	.vsync_len	= 4,
+	.xres		= 480,
+	.yres		= 800,
+};
+
+static struct s3c_fb_platdata smdk4x12_lcd_pdata __initdata = {
+	.win[0]		= &smdk4x12_fb_win0,
+	.vtiming	= &smdk4x12_lcd_timing,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
+};
+#endif
+
+/* USB OTG */
+static struct s3c_hsotg_plat smdk4x12_hsotg_pdata;
+
 static struct platform_device *smdk4x12_devices[] __initdata = {
 	&s3c_device_hsmmc2,
 	&s3c_device_hsmmc3,
@@ -242,22 +301,25 @@ static struct platform_device *smdk4x12_devices[] __initdata = {
 	&s3c_device_i2c3,
 	&s3c_device_i2c7,
 	&s3c_device_rtc,
+	&s3c_device_usb_hsotg,
 	&s3c_device_wdt,
 	&s5p_device_fimc0,
 	&s5p_device_fimc1,
 	&s5p_device_fimc2,
 	&s5p_device_fimc3,
 	&s5p_device_fimc_md,
+	&s5p_device_fimd0,
 	&s5p_device_mfc,
 	&s5p_device_mfc_l,
 	&s5p_device_mfc_r,
+#ifdef CONFIG_DRM_EXYNOS
+	&exynos_device_drm,
+#endif
 	&samsung_device_keypad,
 };
 
 static void __init smdk4x12_map_io(void)
 {
-	clk_xusbxti.rate = 24000000;
-
 	exynos_init_io(NULL, 0);
 	s3c24xx_init_clocks(clk_xusbxti.rate);
 	s3c24xx_init_uarts(smdk4x12_uartcfgs, ARRAY_SIZE(smdk4x12_uartcfgs));
@@ -293,6 +355,15 @@ static void __init smdk4x12_machine_init(void)
 	s3c_sdhci2_set_platdata(&smdk4x12_hsmmc2_pdata);
 	s3c_sdhci3_set_platdata(&smdk4x12_hsmmc3_pdata);
 
+	s3c_hsotg_set_platdata(&smdk4x12_hsotg_pdata);
+
+#ifdef CONFIG_DRM_EXYNOS
+	s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
+	exynos4_fimd0_gpio_setup_24bpp();
+#else
+	s5p_fimd0_set_platdata(&smdk4x12_lcd_pdata);
+#endif
+
 	platform_add_devices(smdk4x12_devices, ARRAY_SIZE(smdk4x12_devices));
 }
 
diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c
index 5fb209c..3cfa688 100644
--- a/arch/arm/mach-exynos/mach-smdkv310.c
+++ b/arch/arm/mach-exynos/mach-smdkv310.c
@@ -19,6 +19,7 @@
 #include <linux/i2c.h>
 #include <linux/input.h>
 #include <linux/pwm_backlight.h>
+#include <linux/platform_data/s3c-hsotg.h>
 
 #include <asm/mach/arch.h>
 #include <asm/hardware/gic.h>
@@ -270,6 +271,15 @@ static void __init smdkv310_ohci_init(void)
 	exynos4_ohci_set_platdata(pdata);
 }
 
+/* USB OTG */
+static struct s3c_hsotg_plat smdkv310_hsotg_pdata;
+
+/* Audio device */
+static struct platform_device smdkv310_device_audio = {
+	.name = "smdk-audio",
+	.id = -1,
+};
+
 static struct platform_device *smdkv310_devices[] __initdata = {
 	&s3c_device_hsmmc0,
 	&s3c_device_hsmmc1,
@@ -278,6 +288,7 @@ static struct platform_device *smdkv310_devices[] __initdata = {
 	&s3c_device_i2c1,
 	&s5p_device_i2c_hdmiphy,
 	&s3c_device_rtc,
+	&s3c_device_usb_hsotg,
 	&s3c_device_wdt,
 	&s5p_device_ehci,
 	&s5p_device_fimc0,
@@ -301,6 +312,7 @@ static struct platform_device *smdkv310_devices[] __initdata = {
 	&samsung_asoc_dma,
 	&samsung_asoc_idma,
 	&s5p_device_fimd0,
+	&smdkv310_device_audio,
 	&smdkv310_lcd_lte480wv,
 	&smdkv310_smsc911x,
 	&exynos4_device_ahci,
@@ -353,7 +365,7 @@ static void s5p_tv_setup(void)
 static void __init smdkv310_map_io(void)
 {
 	exynos_init_io(NULL, 0);
-	s3c24xx_init_clocks(24000000);
+	s3c24xx_init_clocks(clk_xusbxti.rate);
 	s3c24xx_init_uarts(smdkv310_uartcfgs, ARRAY_SIZE(smdkv310_uartcfgs));
 }
 
@@ -389,7 +401,7 @@ static void __init smdkv310_machine_init(void)
 
 	smdkv310_ehci_init();
 	smdkv310_ohci_init();
-	clk_xusbxti.rate = 24000000;
+	s3c_hsotg_set_platdata(&smdkv310_hsotg_pdata);
 
 	platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices));
 }
@@ -416,5 +428,6 @@ MACHINE_START(SMDKC210, "SMDKC210")
 	.init_machine	= smdkv310_machine_init,
 	.init_late	= exynos_init_late,
 	.timer		= &exynos4_timer,
+	.reserve	= &smdkv310_reserve,
 	.restart	= exynos4_restart,
 MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index 68719f5..4d1f40d 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -1099,9 +1099,8 @@ static struct platform_device *universal_devices[] __initdata = {
 
 static void __init universal_map_io(void)
 {
-	clk_xusbxti.rate = 24000000;
 	exynos_init_io(NULL, 0);
-	s3c24xx_init_clocks(24000000);
+	s3c24xx_init_clocks(clk_xusbxti.rate);
 	s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));
 	s5p_set_timer_source(S5P_PWM2, S5P_PWM4);
 }
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index b779ddd..19b771d 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -217,6 +217,10 @@ endif
 # OMAP2420 MSDI controller integration support ("MMC")
 obj-$(CONFIG_SOC_OMAP2420)		+= msdi.o
 
+ifneq ($(CONFIG_DRM_OMAP),)
+obj-y					+= drm.o
+endif
+
 # Specific board support
 obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o
 obj-$(CONFIG_MACH_OMAP_H4)		+= board-h4.o
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 8e17284..ad8a7d9 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -821,6 +821,9 @@ static void __init omap_4430sdp_display_init(void)
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
 	OMAP4_MUX(USBB2_ULPITLL_CLK, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+	/* NIRQ2 for twl6040 */
+	OMAP4_MUX(SYS_NIRQ2, OMAP_MUX_MODE0 |
+		  OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE),
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
 
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index ded100c..97d7190 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -490,6 +490,71 @@ static struct twl4030_platform_data cm_t35_twldata = {
 	.power		= &cm_t35_power_data,
 };
 
+#if defined(CONFIG_VIDEO_OMAP3) || defined(CONFIG_VIDEO_OMAP3_MODULE)
+#include <media/omap3isp.h>
+#include "devices.h"
+
+static struct i2c_board_info cm_t35_isp_i2c_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("mt9t001", 0x5d),
+	},
+	{
+		I2C_BOARD_INFO("tvp5150", 0x5c),
+	},
+};
+
+static struct isp_subdev_i2c_board_info cm_t35_isp_primary_subdevs[] = {
+	{
+		.board_info = &cm_t35_isp_i2c_boardinfo[0],
+		.i2c_adapter_id = 3,
+	},
+	{ NULL, 0, },
+};
+
+static struct isp_subdev_i2c_board_info cm_t35_isp_secondary_subdevs[] = {
+	{
+		.board_info = &cm_t35_isp_i2c_boardinfo[1],
+		.i2c_adapter_id = 3,
+	},
+	{ NULL, 0, },
+};
+
+static struct isp_v4l2_subdevs_group cm_t35_isp_subdevs[] = {
+	{
+		.subdevs = cm_t35_isp_primary_subdevs,
+		.interface = ISP_INTERFACE_PARALLEL,
+		.bus = {
+			.parallel = {
+				.clk_pol = 1,
+			},
+		},
+	},
+	{
+		.subdevs = cm_t35_isp_secondary_subdevs,
+		.interface = ISP_INTERFACE_PARALLEL,
+		.bus = {
+			.parallel = {
+				.clk_pol = 0,
+			},
+		},
+	},
+	{ NULL, 0, },
+};
+
+static struct isp_platform_data cm_t35_isp_pdata = {
+	.subdevs = cm_t35_isp_subdevs,
+};
+
+static void __init cm_t35_init_camera(void)
+{
+	if (omap3_init_camera(&cm_t35_isp_pdata) < 0)
+		pr_warn("CM-T3x: Failed registering camera device!\n");
+}
+
+#else
+static inline void cm_t35_init_camera(void) {}
+#endif /* CONFIG_VIDEO_OMAP3 */
+
 static void __init cm_t35_init_i2c(void)
 {
 	omap3_pmic_get_config(&cm_t35_twldata, TWL_COMMON_PDATA_USB,
@@ -497,6 +562,8 @@ static void __init cm_t35_init_i2c(void)
 			      TWL_COMMON_PDATA_AUDIO);
 
 	omap3_pmic_init("tps65930", &cm_t35_twldata);
+
+	omap_register_i2c_bus(3, 400, NULL, 0);
 }
 
 #ifdef CONFIG_OMAP_MUX
@@ -574,6 +641,27 @@ static struct omap_board_mux board_mux[] __initdata = {
 	OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
 	OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
 
+	/* Camera */
+	OMAP3_MUX(CAM_HS, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(CAM_VS, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(CAM_XCLKA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(CAM_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(CAM_FLD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(CAM_D0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(CAM_D1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(CAM_D2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(CAM_D3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(CAM_D4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(CAM_D5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(CAM_D6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(CAM_D7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(CAM_D8, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+	OMAP3_MUX(CAM_D9, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+	OMAP3_MUX(CAM_STROBE, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
+	OMAP3_MUX(CAM_D10, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLDOWN),
+	OMAP3_MUX(CAM_D11, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLDOWN),
+
 	/* display controls */
 	OMAP3_MUX(MCBSP1_FSR, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
 	OMAP3_MUX(GPMC_NCS7, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
@@ -646,6 +734,7 @@ static void __init cm_t3x_common_init(void)
 
 	usb_musb_init(NULL);
 	cm_t35_init_usbh();
+	cm_t35_init_camera();
 }
 
 static void __init cm_t35_init(void)
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 639bd07..ef230a0 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -24,6 +24,10 @@
 #include <linux/leds.h>
 #include <linux/interrupt.h>
 
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/i2c/twl.h>
@@ -43,6 +47,7 @@
 
 #include <plat/board.h>
 #include <plat/usb.h>
+#include <plat/nand.h>
 #include "common.h"
 #include <plat/mcspi.h>
 #include <video/omapdss.h>
@@ -53,7 +58,6 @@
 #include "hsmmc.h"
 #include "common-board-devices.h"
 
-#define OMAP3_EVM_TS_GPIO	175
 #define OMAP3_EVM_EHCI_VBUS	22
 #define OMAP3_EVM_EHCI_SELECT	61
 
@@ -355,6 +359,19 @@ static int omap3evm_twl_gpio_setup(struct device *dev,
 
 	platform_device_register(&leds_gpio);
 
+	/* Enable VBUS switch by setting TWL4030.GPIO2DIR as output
+	 * for starting USB tranceiver
+	 */
+#ifdef CONFIG_TWL4030_CORE
+	if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) {
+		u8 val;
+
+		twl_i2c_read_u8(TWL4030_MODULE_GPIO, &val, REG_GPIODATADIR1);
+		val |= 0x04; /* TWL4030.GPIO2DIR BIT at GPIODATADIR1(0x9B) */
+		twl_i2c_write_u8(TWL4030_MODULE_GPIO, val, REG_GPIODATADIR1);
+	}
+#endif
+
 	return 0;
 }
 
@@ -461,6 +478,28 @@ struct wl12xx_platform_data omap3evm_wlan_data __initdata = {
 };
 #endif
 
+/* VAUX2 for USB */
+static struct regulator_consumer_supply omap3evm_vaux2_supplies[] = {
+	REGULATOR_SUPPLY("VDD_CSIPHY1", "omap3isp"),	/* OMAP ISP */
+	REGULATOR_SUPPLY("VDD_CSIPHY2", "omap3isp"),	/* OMAP ISP */
+	REGULATOR_SUPPLY("hsusb1", "ehci-omap.0"),
+	REGULATOR_SUPPLY("vaux2", NULL),
+};
+
+static struct regulator_init_data omap3evm_vaux2 = {
+	.constraints = {
+		.min_uV		= 2800000,
+		.max_uV		= 2800000,
+		.apply_uV	= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies		= ARRAY_SIZE(omap3evm_vaux2_supplies),
+	.consumer_supplies		= omap3evm_vaux2_supplies,
+};
+
 static struct twl4030_platform_data omap3evm_twldata = {
 	/* platform_data for children goes here */
 	.keypad		= &omap3evm_kp_data,
@@ -607,6 +646,37 @@ static struct regulator_consumer_supply dummy_supplies[] = {
 	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
 };
 
+static struct mtd_partition omap3evm_nand_partitions[] = {
+	/* All the partition sizes are listed in terms of NAND block size */
+	{
+		.name           = "X-Loader",
+		.offset         = 0,
+		.size           = 4*(SZ_128K),
+		.mask_flags     = MTD_WRITEABLE
+	},
+	{
+		.name           = "U-Boot",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 14*(SZ_128K),
+		.mask_flags     = MTD_WRITEABLE
+	},
+	{
+		.name           = "U-Boot Env",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 2*(SZ_128K)
+	},
+	{
+		.name           = "Kernel",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 40*(SZ_128K)
+	},
+	{
+		.name           = "File system",
+		.size           = MTDPART_SIZ_FULL,
+		.offset         = MTDPART_OFS_APPEND,
+	},
+};
+
 static void __init omap3_evm_init(void)
 {
 	struct omap_board_mux *obm;
@@ -623,6 +693,9 @@ static void __init omap3_evm_init(void)
 	omap_mux_init_gpio(63, OMAP_PIN_INPUT);
 	omap_hsmmc_init(mmc);
 
+	if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2)
+		omap3evm_twldata.vaux2 = &omap3evm_vaux2;
+
 	omap3_evm_i2c_init();
 
 	omap_display_init(&omap3_evm_dss_data);
@@ -656,6 +729,9 @@ static void __init omap3_evm_init(void)
 	}
 	usb_musb_init(&musb_board_data);
 	usbhs_init(&usbhs_bdata);
+	omap_nand_flash_init(NAND_BUSWIDTH_16, omap3evm_nand_partitions,
+			     ARRAY_SIZE(omap3evm_nand_partitions));
+
 	omap_ads7846_init(1, OMAP3_EVM_TS_GPIO, 310, NULL);
 	omap3evm_init_smsc911x();
 	omap3_evm_display_init();
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 982fb26..b627cdc 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -379,6 +379,9 @@ static struct omap_board_mux board_mux[] __initdata = {
 	OMAP4_MUX(DPM_EMU18, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
 	/* dispc2_data0 */
 	OMAP4_MUX(DPM_EMU19, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* NIRQ2 for twl6040 */
+	OMAP4_MUX(SYS_NIRQ2, OMAP_MUX_MODE0 |
+		  OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE),
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
 
diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c
index c187586..1473474 100644
--- a/arch/arm/mach-omap2/common-board-devices.c
+++ b/arch/arm/mach-omap2/common-board-devices.c
@@ -35,6 +35,16 @@ static struct omap2_mcspi_device_config ads7846_mcspi_config = {
 	.turbo_mode	= 0,
 };
 
+/*
+ * ADS7846 driver maybe request a gpio according to the value
+ * of pdata->get_pendown_state, but we have done this. So set
+ * get_pendown_state to avoid twice gpio requesting.
+ */
+static int omap3_get_pendown_state(void)
+{
+	return !gpio_get_value(OMAP3_EVM_TS_GPIO);
+}
+
 static struct ads7846_platform_data ads7846_config = {
 	.x_max			= 0x0fff,
 	.y_max			= 0x0fff,
@@ -45,6 +55,7 @@ static struct ads7846_platform_data ads7846_config = {
 	.debounce_rep		= 1,
 	.gpio_pendown		= -EINVAL,
 	.keep_vref_on		= 1,
+	.get_pendown_state	= &omap3_get_pendown_state,
 };
 
 static struct spi_board_info ads7846_spi_board_info __initdata = {
diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h
index a0b4a428..4c4ef6a 100644
--- a/arch/arm/mach-omap2/common-board-devices.h
+++ b/arch/arm/mach-omap2/common-board-devices.h
@@ -4,6 +4,7 @@
 #include "twl-common.h"
 
 #define NAND_BLOCK_SIZE	SZ_128K
+#define OMAP3_EVM_TS_GPIO	175
 
 struct mtd_partition;
 struct ads7846_platform_data;
diff --git a/arch/arm/mach-omap2/drm.c b/arch/arm/mach-omap2/drm.c
new file mode 100644
index 0000000..72e0f01b
--- /dev/null
+++ b/arch/arm/mach-omap2/drm.c
@@ -0,0 +1,61 @@
+/*
+ * DRM/KMS device registration for TI OMAP platforms
+ *
+ * Copyright (C) 2012 Texas Instruments
+ * Author: Rob Clark <rob.clark@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <plat/omap_device.h>
+#include <plat/omap_hwmod.h>
+
+#if defined(CONFIG_DRM_OMAP) || (CONFIG_DRM_OMAP_MODULE)
+
+static struct platform_device omap_drm_device = {
+	.dev = {
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.name = "omapdrm",
+	.id = 0,
+};
+
+static int __init omap_init_drm(void)
+{
+	struct omap_hwmod *oh = NULL;
+	struct platform_device *pdev;
+
+	/* lookup and populate the DMM information, if present - OMAP4+ */
+	oh = omap_hwmod_lookup("dmm");
+
+	if (oh) {
+		pdev = omap_device_build(oh->name, -1, oh, NULL, 0, NULL, 0,
+					false);
+		WARN(IS_ERR(pdev), "Could not build omap_device for %s\n",
+			oh->name);
+	}
+
+	return platform_device_register(&omap_drm_device);
+
+}
+
+arch_initcall(omap_init_drm);
+
+#endif
diff --git a/arch/arm/mach-s3c64xx/include/mach/crag6410.h b/arch/arm/mach-s3c64xx/include/mach/crag6410.h
index 4cb2f951..4c3c999 100644
--- a/arch/arm/mach-s3c64xx/include/mach/crag6410.h
+++ b/arch/arm/mach-s3c64xx/include/mach/crag6410.h
@@ -13,9 +13,7 @@
 
 #include <linux/gpio.h>
 
-#define BANFF_PMIC_IRQ_BASE		IRQ_BOARD_START
-#define GLENFARCLAS_PMIC_IRQ_BASE	(IRQ_BOARD_START + 64)
-#define CODEC_IRQ_BASE			(IRQ_BOARD_START + 128)
+#define GLENFARCLAS_PMIC_IRQ_BASE	IRQ_BOARD_START
 
 #define PCA935X_GPIO_BASE		GPIO_BOARD_START
 #define CODEC_GPIO_BASE			(GPIO_BOARD_START + 8)
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
index 7a27f56..9e382e7 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -29,7 +29,6 @@
 #include <mach/crag6410.h>
 
 static struct s3c64xx_spi_csinfo wm0010_spi_csinfo = {
-	.set_level = gpio_set_value,
 	.line = S3C64XX_GPC(3),
 };
 
@@ -39,6 +38,7 @@ static struct spi_board_info wm1253_devs[] = {
 		.bus_num	= 0,
 		.chip_select	= 0,
 		.mode		= SPI_MODE_0,
+		.irq		= S3C_EINT(5),
 		.controller_data = &wm0010_spi_csinfo,
 	},
 };
@@ -168,7 +168,6 @@ static struct wm8994_pdata wm8994_pdata = {
 	.gpio_defaults = {
 		0x3,          /* IRQ out, active high, CMOS */
 	},
-	.irq_base = CODEC_IRQ_BASE,
 	.ldo = {
 		 { .init_data = &wm8994_ldo1, },
 		 { .init_data = &wm8994_ldo2, },
@@ -182,6 +181,11 @@ static const struct i2c_board_info wm1277_devs[] = {
 	},
 };
 
+static const struct i2c_board_info wm5102_devs[] = {
+	{ I2C_BOARD_INFO("wm5102", 0x1a),
+	  .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, },
+};
+
 static const struct i2c_board_info wm6230_i2c_devs[] = {
 	{ I2C_BOARD_INFO("wm9081", 0x6c),
 	  .platform_data = &wm9081_pdata, },
@@ -209,6 +213,7 @@ static __devinitdata const struct {
 	  .spi_devs = wm1253_devs, .num_spi_devs = ARRAY_SIZE(wm1253_devs) },
 	{ .id = 0x32, .name = "XXXX-EV1 Caol Illa" },
 	{ .id = 0x33, .name = "XXXX-EV1 Oban" },
+	{ .id = 0x34, .name = "WM0010-6320-CS42 Balblair" },
 	{ .id = 0x39, .name = "1254-EV1 Dallas Dhu",
 	  .i2c_devs = wm1254_devs, .num_i2c_devs = ARRAY_SIZE(wm1254_devs) },
 	{ .id = 0x3a, .name = "1259-EV1 Tobermory",
@@ -218,6 +223,8 @@ static __devinitdata const struct {
 	{ .id = 0x3c, .name = "1273-EV1 Longmorn" },
 	{ .id = 0x3d, .name = "1277-EV1 Littlemill",
 	  .i2c_devs = wm1277_devs, .num_i2c_devs = ARRAY_SIZE(wm1277_devs) },
+	{ .id = 0x3e, .name = "WM5102-6271-EV1-CS127",
+	  .i2c_devs = wm5102_devs, .num_i2c_devs = ARRAY_SIZE(wm5102_devs) },
 };
 
 static __devinit int wlf_gf_module_probe(struct i2c_client *i2c,
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index 6dd4fae3..09cd812 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -171,7 +171,7 @@ static struct fb_videomode crag6410_lcd_timing = {
 };
 
 /* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
-static struct s3c_fb_platdata crag6410_lcd_pdata __initdata = {
+static struct s3c_fb_platdata crag6410_lcd_pdata __devinitdata = {
 	.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
 	.vtiming	= &crag6410_lcd_timing,
 	.win[0]		= &crag6410_fb_win0,
@@ -181,7 +181,7 @@ static struct s3c_fb_platdata crag6410_lcd_pdata __initdata = {
 
 /* 2x6 keypad */
 
-static uint32_t crag6410_keymap[] __initdata = {
+static uint32_t crag6410_keymap[] __devinitdata = {
 	/* KEY(row, col, keycode) */
 	KEY(0, 0, KEY_VOLUMEUP),
 	KEY(0, 1, KEY_HOME),
@@ -197,12 +197,12 @@ static uint32_t crag6410_keymap[] __initdata = {
 	KEY(1, 5, KEY_CAMERA),
 };
 
-static struct matrix_keymap_data crag6410_keymap_data __initdata = {
+static struct matrix_keymap_data crag6410_keymap_data __devinitdata = {
 	.keymap		= crag6410_keymap,
 	.keymap_size	= ARRAY_SIZE(crag6410_keymap),
 };
 
-static struct samsung_keypad_platdata crag6410_keypad_data __initdata = {
+static struct samsung_keypad_platdata crag6410_keypad_data __devinitdata = {
 	.keymap_data	= &crag6410_keymap_data,
 	.rows		= 2,
 	.cols		= 6,
@@ -373,11 +373,11 @@ static struct wm831x_buckv_pdata vddarm_pdata = {
 	.dvs_gpio = S3C64XX_GPK(0),
 };
 
-static struct regulator_consumer_supply vddarm_consumers[] __initdata = {
+static struct regulator_consumer_supply vddarm_consumers[] __devinitdata = {
 	REGULATOR_SUPPLY("vddarm", NULL),
 };
 
-static struct regulator_init_data vddarm __initdata = {
+static struct regulator_init_data vddarm __devinitdata = {
 	.constraints = {
 		.name = "VDDARM",
 		.min_uV = 1000000,
@@ -391,11 +391,11 @@ static struct regulator_init_data vddarm __initdata = {
 	.driver_data = &vddarm_pdata,
 };
 
-static struct regulator_consumer_supply vddint_consumers[] __initdata = {
+static struct regulator_consumer_supply vddint_consumers[] __devinitdata = {
 	REGULATOR_SUPPLY("vddint", NULL),
 };
 
-static struct regulator_init_data vddint __initdata = {
+static struct regulator_init_data vddint __devinitdata = {
 	.constraints = {
 		.name = "VDDINT",
 		.min_uV = 1000000,
@@ -408,27 +408,27 @@ static struct regulator_init_data vddint __initdata = {
 	.supply_regulator = "WALLVDD",
 };
 
-static struct regulator_init_data vddmem __initdata = {
+static struct regulator_init_data vddmem __devinitdata = {
 	.constraints = {
 		.name = "VDDMEM",
 		.always_on = 1,
 	},
 };
 
-static struct regulator_init_data vddsys __initdata = {
+static struct regulator_init_data vddsys __devinitdata = {
 	.constraints = {
 		.name = "VDDSYS,VDDEXT,VDDPCM,VDDSS",
 		.always_on = 1,
 	},
 };
 
-static struct regulator_consumer_supply vddmmc_consumers[] __initdata = {
+static struct regulator_consumer_supply vddmmc_consumers[] __devinitdata = {
 	REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"),
 	REGULATOR_SUPPLY("vmmc", "s3c-sdhci.1"),
 	REGULATOR_SUPPLY("vmmc", "s3c-sdhci.2"),
 };
 
-static struct regulator_init_data vddmmc __initdata = {
+static struct regulator_init_data vddmmc __devinitdata = {
 	.constraints = {
 		.name = "VDDMMC,UH",
 		.always_on = 1,
@@ -438,7 +438,7 @@ static struct regulator_init_data vddmmc __initdata = {
 	.supply_regulator = "WALLVDD",
 };
 
-static struct regulator_init_data vddotgi __initdata = {
+static struct regulator_init_data vddotgi __devinitdata = {
 	.constraints = {
 		.name = "VDDOTGi",
 		.always_on = 1,
@@ -446,7 +446,7 @@ static struct regulator_init_data vddotgi __initdata = {
 	.supply_regulator = "WALLVDD",
 };
 
-static struct regulator_init_data vddotg __initdata = {
+static struct regulator_init_data vddotg __devinitdata = {
 	.constraints = {
 		.name = "VDDOTG",
 		.always_on = 1,
@@ -454,7 +454,7 @@ static struct regulator_init_data vddotg __initdata = {
 	.supply_regulator = "WALLVDD",
 };
 
-static struct regulator_init_data vddhi __initdata = {
+static struct regulator_init_data vddhi __devinitdata = {
 	.constraints = {
 		.name = "VDDHI",
 		.always_on = 1,
@@ -462,7 +462,7 @@ static struct regulator_init_data vddhi __initdata = {
 	.supply_regulator = "WALLVDD",
 };
 
-static struct regulator_init_data vddadc __initdata = {
+static struct regulator_init_data vddadc __devinitdata = {
 	.constraints = {
 		.name = "VDDADC,VDDDAC",
 		.always_on = 1,
@@ -470,7 +470,7 @@ static struct regulator_init_data vddadc __initdata = {
 	.supply_regulator = "WALLVDD",
 };
 
-static struct regulator_init_data vddmem0 __initdata = {
+static struct regulator_init_data vddmem0 __devinitdata = {
 	.constraints = {
 		.name = "VDDMEM0",
 		.always_on = 1,
@@ -478,7 +478,7 @@ static struct regulator_init_data vddmem0 __initdata = {
 	.supply_regulator = "WALLVDD",
 };
 
-static struct regulator_init_data vddpll __initdata = {
+static struct regulator_init_data vddpll __devinitdata = {
 	.constraints = {
 		.name = "VDDPLL",
 		.always_on = 1,
@@ -486,7 +486,7 @@ static struct regulator_init_data vddpll __initdata = {
 	.supply_regulator = "WALLVDD",
 };
 
-static struct regulator_init_data vddlcd __initdata = {
+static struct regulator_init_data vddlcd __devinitdata = {
 	.constraints = {
 		.name = "VDDLCD",
 		.always_on = 1,
@@ -494,7 +494,7 @@ static struct regulator_init_data vddlcd __initdata = {
 	.supply_regulator = "WALLVDD",
 };
 
-static struct regulator_init_data vddalive __initdata = {
+static struct regulator_init_data vddalive __devinitdata = {
 	.constraints = {
 		.name = "VDDALIVE",
 		.always_on = 1,
@@ -502,30 +502,29 @@ static struct regulator_init_data vddalive __initdata = {
 	.supply_regulator = "WALLVDD",
 };
 
-static struct wm831x_backup_pdata banff_backup_pdata __initdata = {
+static struct wm831x_backup_pdata banff_backup_pdata __devinitdata = {
 	.charger_enable = 1,
 	.vlim = 2500,  /* mV */
 	.ilim = 200,   /* uA */
 };
 
-static struct wm831x_status_pdata banff_red_led __initdata = {
+static struct wm831x_status_pdata banff_red_led __devinitdata = {
 	.name = "banff:red:",
 	.default_src = WM831X_STATUS_MANUAL,
 };
 
-static struct wm831x_status_pdata banff_green_led __initdata = {
+static struct wm831x_status_pdata banff_green_led __devinitdata = {
 	.name = "banff:green:",
 	.default_src = WM831X_STATUS_MANUAL,
 };
 
-static struct wm831x_touch_pdata touch_pdata __initdata = {
+static struct wm831x_touch_pdata touch_pdata __devinitdata = {
 	.data_irq = S3C_EINT(26),
 	.pd_irq = S3C_EINT(27),
 };
 
-static struct wm831x_pdata crag_pmic_pdata __initdata = {
+static struct wm831x_pdata crag_pmic_pdata __devinitdata = {
 	.wm831x_num = 1,
-	.irq_base = BANFF_PMIC_IRQ_BASE,
 	.gpio_base = BANFF_PMIC_GPIO_BASE,
 	.soft_shutdown = true,
 
@@ -568,7 +567,7 @@ static struct wm831x_pdata crag_pmic_pdata __initdata = {
 	.touch = &touch_pdata,
 };
 
-static struct i2c_board_info i2c_devs0[] __initdata = {
+static struct i2c_board_info i2c_devs0[] __devinitdata = {
 	{ I2C_BOARD_INFO("24c08", 0x50), },
 	{ I2C_BOARD_INFO("tca6408", 0x20),
 	  .platform_data = &crag6410_pca_data,
@@ -583,12 +582,12 @@ static struct s3c2410_platform_i2c i2c0_pdata = {
 	.frequency = 400000,
 };
 
-static struct regulator_consumer_supply pvdd_1v2_consumers[] __initdata = {
+static struct regulator_consumer_supply pvdd_1v2_consumers[] __devinitdata = {
 	REGULATOR_SUPPLY("DCVDD", "spi0.0"),
 	REGULATOR_SUPPLY("AVDD", "spi0.0"),
 };
 
-static struct regulator_init_data pvdd_1v2 __initdata = {
+static struct regulator_init_data pvdd_1v2 __devinitdata = {
 	.constraints = {
 		.name = "PVDD_1V2",
 		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
@@ -598,7 +597,7 @@ static struct regulator_init_data pvdd_1v2 __initdata = {
 	.num_consumer_supplies = ARRAY_SIZE(pvdd_1v2_consumers),
 };
 
-static struct regulator_consumer_supply pvdd_1v8_consumers[] __initdata = {
+static struct regulator_consumer_supply pvdd_1v8_consumers[] __devinitdata = {
 	REGULATOR_SUPPLY("LDOVDD", "1-001a"),
 	REGULATOR_SUPPLY("PLLVDD", "1-001a"),
 	REGULATOR_SUPPLY("DBVDD", "1-001a"),
@@ -612,7 +611,7 @@ static struct regulator_consumer_supply pvdd_1v8_consumers[] __initdata = {
 	REGULATOR_SUPPLY("DBVDD", "spi0.0"),
 };
 
-static struct regulator_init_data pvdd_1v8 __initdata = {
+static struct regulator_init_data pvdd_1v8 __devinitdata = {
 	.constraints = {
 		.name = "PVDD_1V8",
 		.always_on = 1,
@@ -622,12 +621,12 @@ static struct regulator_init_data pvdd_1v8 __initdata = {
 	.num_consumer_supplies = ARRAY_SIZE(pvdd_1v8_consumers),
 };
 
-static struct regulator_consumer_supply pvdd_3v3_consumers[] __initdata = {
+static struct regulator_consumer_supply pvdd_3v3_consumers[] __devinitdata = {
 	REGULATOR_SUPPLY("MICVDD", "1-001a"),
 	REGULATOR_SUPPLY("AVDD1", "1-001a"),
 };
 
-static struct regulator_init_data pvdd_3v3 __initdata = {
+static struct regulator_init_data pvdd_3v3 __devinitdata = {
 	.constraints = {
 		.name = "PVDD_3V3",
 		.always_on = 1,
@@ -637,7 +636,7 @@ static struct regulator_init_data pvdd_3v3 __initdata = {
 	.num_consumer_supplies = ARRAY_SIZE(pvdd_3v3_consumers),
 };
 
-static struct wm831x_pdata glenfarclas_pmic_pdata __initdata = {
+static struct wm831x_pdata glenfarclas_pmic_pdata __devinitdata = {
 	.wm831x_num = 2,
 	.irq_base = GLENFARCLAS_PMIC_IRQ_BASE,
 	.gpio_base = GLENFARCLAS_PMIC_GPIO_BASE,
@@ -669,7 +668,7 @@ static struct wm1250_ev1_pdata wm1250_ev1_pdata = {
 	},
 };
 
-static struct i2c_board_info i2c_devs1[] __initdata = {
+static struct i2c_board_info i2c_devs1[] __devinitdata = {
 	{ I2C_BOARD_INFO("wm8311", 0x34),
 	  .irq = S3C_EINT(0),
 	  .platform_data = &glenfarclas_pmic_pdata },
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index df3103d..0fe4f15 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -566,7 +566,6 @@ static struct wm831x_status_pdata wm1192_led8_pdata = {
 
 static struct wm831x_pdata smdk6410_wm1192_pdata = {
 	.pre_init = wm1192_pre_init,
-	.irq_base = IRQ_BOARD_START,
 
 	.backlight = &wm1192_backlight_pdata,
 	.dcdc = {
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 88e983b..77185c3 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -152,6 +152,7 @@ config MACH_SMDKV210
 	select S3C_DEV_I2C1
 	select S3C_DEV_I2C2
 	select S3C_DEV_RTC
+	select S3C_DEV_USB_HSOTG
 	select S3C_DEV_WDT
 	select S5P_DEV_FIMC0
 	select S5P_DEV_FIMC1
@@ -170,6 +171,7 @@ config MACH_SMDKV210
 	select S5PV210_SETUP_IDE
 	select S5PV210_SETUP_KEYPAD
 	select S5PV210_SETUP_SDHCI
+	select S5PV210_SETUP_USB_PHY
 	help
 	  Machine support for Samsung SMDKV210
 
diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c
index af528f9..78028df 100644
--- a/arch/arm/mach-s5pv210/mach-aquila.c
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
@@ -600,10 +600,17 @@ static void aquila_setup_sdhci(void)
 	s3c_sdhci2_set_platdata(&aquila_hsmmc2_data);
 };
 
+/* Audio device */
+static struct platform_device aquila_device_audio = {
+	.name = "smdk-audio",
+	.id = -1,
+};
+
 static struct platform_device *aquila_devices[] __initdata = {
 	&aquila_i2c_gpio_pmic,
 	&aquila_i2c_gpio5,
 	&aquila_device_gpiokeys,
+	&aquila_device_audio,
 	&s3c_device_fb,
 	&s5p_device_onenand,
 	&s3c_device_hsmmc0,
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index bf5087c..822a559 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -859,12 +859,19 @@ static struct s5p_platform_fimc goni_fimc_md_platdata __initdata = {
 	.num_clients	= ARRAY_SIZE(goni_camera_sensors),
 };
 
+/* Audio device */
+static struct platform_device goni_device_audio = {
+	.name = "smdk-audio",
+	.id = -1,
+};
+
 static struct platform_device *goni_devices[] __initdata = {
 	&s3c_device_fb,
 	&s5p_device_onenand,
 	&goni_spi_gpio,
 	&goni_i2c_gpio_pmic,
 	&goni_i2c_gpio5,
+	&goni_device_audio,
 	&mmc2_fixed_voltage,
 	&goni_device_gpiokeys,
 	&s5p_device_mfc,
@@ -901,7 +908,7 @@ static void __init goni_sound_init(void)
 static void __init goni_map_io(void)
 {
 	s5pv210_init_io(NULL, 0);
-	s3c24xx_init_clocks(24000000);
+	s3c24xx_init_clocks(clk_xusbxti.rate);
 	s3c24xx_init_uarts(goni_uartcfgs, ARRAY_SIZE(goni_uartcfgs));
 	s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
 }
@@ -959,8 +966,6 @@ static void __init goni_machine_init(void)
 	/* KEYPAD */
 	samsung_keypad_set_platdata(&keypad_data);
 
-	clk_xusbxti.rate = 24000000;
-
 	platform_add_devices(goni_devices, ARRAY_SIZE(goni_devices));
 }
 
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index 0d7ddec..918b23d 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -19,6 +19,7 @@
 #include <linux/gpio.h>
 #include <linux/delay.h>
 #include <linux/pwm_backlight.h>
+#include <linux/platform_data/s3c-hsotg.h>
 
 #include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
@@ -47,6 +48,7 @@
 #include <plat/backlight.h>
 #include <plat/regs-fb-v4.h>
 #include <plat/mfc.h>
+#include <plat/clock.h>
 
 #include "common.h"
 
@@ -203,6 +205,9 @@ static struct s3c_fb_platdata smdkv210_lcd0_pdata __initdata = {
 	.setup_gpio	= s5pv210_fb_gpio_setup_24bpp,
 };
 
+/* USB OTG */
+static struct s3c_hsotg_plat smdkv210_hsotg_pdata;
+
 static struct platform_device *smdkv210_devices[] __initdata = {
 	&s3c_device_adc,
 	&s3c_device_cfcon,
@@ -216,6 +221,7 @@ static struct platform_device *smdkv210_devices[] __initdata = {
 	&s3c_device_i2c2,
 	&s3c_device_rtc,
 	&s3c_device_ts,
+	&s3c_device_usb_hsotg,
 	&s3c_device_wdt,
 	&s5p_device_fimc0,
 	&s5p_device_fimc1,
@@ -279,7 +285,7 @@ static struct platform_pwm_backlight_data smdkv210_bl_data = {
 static void __init smdkv210_map_io(void)
 {
 	s5pv210_init_io(NULL, 0);
-	s3c24xx_init_clocks(24000000);
+	s3c24xx_init_clocks(clk_xusbxti.rate);
 	s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs));
 	s5p_set_timer_source(S5P_PWM2, S5P_PWM4);
 }
@@ -314,6 +320,8 @@ static void __init smdkv210_machine_init(void)
 
 	samsung_bl_set(&smdkv210_bl_gpio_info, &smdkv210_bl_data);
 
+	s3c_hsotg_set_platdata(&smdkv210_hsotg_pdata);
+
 	platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices));
 }
 
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index 7c40739..9077aaa 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -66,34 +66,12 @@ config MACH_HARMONY
        help
          Support for nVidia Harmony development platform
 
-config MACH_KAEN
-       bool "Kaen board"
-       depends on ARCH_TEGRA_2x_SOC
-       select MACH_SEABOARD
-       help
-         Support for the Kaen version of Seaboard
-
 config MACH_PAZ00
        bool "Paz00 board"
        depends on ARCH_TEGRA_2x_SOC
        help
          Support for the Toshiba AC100/Dynabook AZ netbook
 
-config MACH_SEABOARD
-       bool "Seaboard board"
-       depends on ARCH_TEGRA_2x_SOC
-       help
-         Support for nVidia Seaboard development platform. It will
-	 also be included for some of the derivative boards that
-	 have large similarities with the seaboard design.
-
-config MACH_TEGRA_DT
-	bool "Generic Tegra20 board (FDT support)"
-	depends on ARCH_TEGRA_2x_SOC
-	select USE_OF
-	help
-	  Support for generic NVIDIA Tegra20 boards using Flattened Device Tree
-
 config MACH_TRIMSLICE
        bool "TrimSlice board"
        depends on ARCH_TEGRA_2x_SOC
@@ -101,20 +79,6 @@ config MACH_TRIMSLICE
        help
          Support for CompuLab TrimSlice platform
 
-config MACH_WARIO
-       bool "Wario board"
-       depends on ARCH_TEGRA_2x_SOC
-       select MACH_SEABOARD
-       help
-         Support for the Wario version of Seaboard
-
-config MACH_VENTANA
-       bool "Ventana board"
-       depends on ARCH_TEGRA_2x_SOC
-       select MACH_TEGRA_DT
-       help
-         Support for the nVidia Ventana development platform
-
 choice
         prompt "Default low-level debug console UART"
         default TEGRA_DEBUG_UART_NONE
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index 90aae34..c3d7303 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -14,7 +14,6 @@ obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
 obj-$(CONFIG_CPU_IDLE)			+= sleep.o
 obj-$(CONFIG_ARCH_TEGRA_2x_SOC)         += tegra2_clocks.o
 obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= tegra2_emc.o
-obj-$(CONFIG_ARCH_TEGRA_3x_SOC)		+= board-dt-tegra30.o
 obj-$(CONFIG_ARCH_TEGRA_3x_SOC)		+= tegra30_clocks.o
 obj-$(CONFIG_SMP)			+= platsmp.o headsmp.o
 obj-$(CONFIG_SMP)                       += reset.o
@@ -24,6 +23,9 @@ obj-$(CONFIG_CPU_FREQ)                  += cpu-tegra.o
 obj-$(CONFIG_TEGRA_PCI)			+= pcie.o
 obj-$(CONFIG_USB_SUPPORT)		+= usb_phy.o
 
+obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= board-dt-tegra20.o
+obj-$(CONFIG_ARCH_TEGRA_3x_SOC)		+= board-dt-tegra30.o
+
 obj-$(CONFIG_MACH_HARMONY)              += board-harmony.o
 obj-$(CONFIG_MACH_HARMONY)              += board-harmony-pinmux.o
 obj-$(CONFIG_MACH_HARMONY)              += board-harmony-pcie.o
@@ -32,14 +34,5 @@ obj-$(CONFIG_MACH_HARMONY)              += board-harmony-power.o
 obj-$(CONFIG_MACH_PAZ00)		+= board-paz00.o
 obj-$(CONFIG_MACH_PAZ00)		+= board-paz00-pinmux.o
 
-obj-$(CONFIG_MACH_SEABOARD)             += board-seaboard.o
-obj-$(CONFIG_MACH_SEABOARD)             += board-seaboard-pinmux.o
-
-obj-$(CONFIG_MACH_TEGRA_DT)             += board-dt-tegra20.o
-obj-$(CONFIG_MACH_TEGRA_DT)             += board-harmony-pinmux.o
-obj-$(CONFIG_MACH_TEGRA_DT)             += board-seaboard-pinmux.o
-obj-$(CONFIG_MACH_TEGRA_DT)             += board-paz00-pinmux.o
-obj-$(CONFIG_MACH_TEGRA_DT)             += board-trimslice-pinmux.o
-
 obj-$(CONFIG_MACH_TRIMSLICE)            += board-trimslice.o
 obj-$(CONFIG_MACH_TRIMSLICE)            += board-trimslice-pinmux.o
diff --git a/arch/arm/mach-tegra/Makefile.boot b/arch/arm/mach-tegra/Makefile.boot
index 435f00c..7a1bb62 100644
--- a/arch/arm/mach-tegra/Makefile.boot
+++ b/arch/arm/mach-tegra/Makefile.boot
@@ -2,10 +2,10 @@ zreladdr-$(CONFIG_ARCH_TEGRA_2x_SOC)	+= 0x00008000
 params_phys-$(CONFIG_ARCH_TEGRA_2x_SOC)	:= 0x00000100
 initrd_phys-$(CONFIG_ARCH_TEGRA_2x_SOC)	:= 0x00800000
 
-dtb-$(CONFIG_MACH_HARMONY) += tegra20-harmony.dtb
-dtb-$(CONFIG_MACH_PAZ00) += tegra20-paz00.dtb
-dtb-$(CONFIG_MACH_SEABOARD) += tegra20-seaboard.dtb
-dtb-$(CONFIG_MACH_TRIMSLICE) += tegra20-trimslice.dtb
-dtb-$(CONFIG_MACH_VENTANA) += tegra20-ventana.dtb
+dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-harmony.dtb
+dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-paz00.dtb
+dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-seaboard.dtb
+dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-trimslice.dtb
+dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-ventana.dtb
 dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-whistler.dtb
 dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30-cardhu.dtb
diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c b/arch/arm/mach-tegra/board-dt-tegra20.c
index eb7249d..d0de9c1 100644
--- a/arch/arm/mach-tegra/board-dt-tegra20.c
+++ b/arch/arm/mach-tegra/board-dt-tegra20.c
@@ -64,6 +64,7 @@ struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = {
 		       &tegra_ehci2_pdata),
 	OF_DEV_AUXDATA("nvidia,tegra20-ehci", TEGRA_USB3_BASE, "tegra-ehci.2",
 		       &tegra_ehci3_pdata),
+	OF_DEV_AUXDATA("nvidia,tegra20-apbdma", 0x6000a000, "tegra-apbdma", NULL),
 	{}
 };
 
@@ -81,11 +82,6 @@ static __initdata struct tegra_clk_init_table tegra_dt_clk_init_table[] = {
 	{ NULL,		NULL,		0,		0},
 };
 
-static struct of_device_id tegra_dt_match_table[] __initdata = {
-	{ .compatible = "simple-bus", },
-	{}
-};
-
 static void __init tegra_dt_init(void)
 {
 	tegra_clk_init_from_table(tegra_dt_clk_init_table);
@@ -94,10 +90,74 @@ static void __init tegra_dt_init(void)
 	 * Finished with the static registrations now; fill in the missing
 	 * devices
 	 */
-	of_platform_populate(NULL, tegra_dt_match_table,
+	of_platform_populate(NULL, of_default_bus_match_table,
 				tegra20_auxdata_lookup, NULL);
 }
 
+#ifdef CONFIG_MACH_TRIMSLICE
+static void __init trimslice_init(void)
+{
+	int ret;
+
+	ret = tegra_pcie_init(true, true);
+	if (ret)
+		pr_err("tegra_pci_init() failed: %d\n", ret);
+}
+#endif
+
+#ifdef CONFIG_MACH_HARMONY
+static void __init harmony_init(void)
+{
+	int ret;
+
+	ret = harmony_regulator_init();
+	if (ret) {
+		pr_err("harmony_regulator_init() failed: %d\n", ret);
+		return;
+	}
+
+	ret = harmony_pcie_init();
+	if (ret)
+		pr_err("harmony_pcie_init() failed: %d\n", ret);
+}
+#endif
+
+#ifdef CONFIG_MACH_PAZ00
+static void __init paz00_init(void)
+{
+	tegra_paz00_wifikill_init();
+}
+#endif
+
+static struct {
+	char *machine;
+	void (*init)(void);
+} board_init_funcs[] = {
+#ifdef CONFIG_MACH_TRIMSLICE
+	{ "compulab,trimslice", trimslice_init },
+#endif
+#ifdef CONFIG_MACH_HARMONY
+	{ "nvidia,harmony", harmony_init },
+#endif
+#ifdef CONFIG_MACH_PAZ00
+	{ "compal,paz00", paz00_init },
+#endif
+};
+
+static void __init tegra_dt_init_late(void)
+{
+	int i;
+
+	tegra_init_late();
+
+	for (i = 0; i < ARRAY_SIZE(board_init_funcs); i++) {
+		if (of_machine_is_compatible(board_init_funcs[i].machine)) {
+			board_init_funcs[i].init();
+			break;
+		}
+	}
+}
+
 static const char *tegra20_dt_board_compat[] = {
 	"nvidia,tegra20",
 	NULL
@@ -110,7 +170,7 @@ DT_MACHINE_START(TEGRA_DT, "nVidia Tegra20 (Flattened Device Tree)")
 	.handle_irq	= gic_handle_irq,
 	.timer		= &tegra_timer,
 	.init_machine	= tegra_dt_init,
-	.init_late	= tegra_init_late,
+	.init_late	= tegra_dt_init_late,
 	.restart	= tegra_assert_system_reset,
 	.dt_compat	= tegra20_dt_board_compat,
 MACHINE_END
diff --git a/arch/arm/mach-tegra/board-dt-tegra30.c b/arch/arm/mach-tegra/board-dt-tegra30.c
index 4f76fa7..ee48214 100644
--- a/arch/arm/mach-tegra/board-dt-tegra30.c
+++ b/arch/arm/mach-tegra/board-dt-tegra30.c
@@ -36,11 +36,6 @@
 #include "board.h"
 #include "clock.h"
 
-static struct of_device_id tegra_dt_match_table[] __initdata = {
-	{ .compatible = "simple-bus", },
-	{}
-};
-
 struct of_dev_auxdata tegra30_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("nvidia,tegra20-sdhci", 0x78000000, "sdhci-tegra.0", NULL),
 	OF_DEV_AUXDATA("nvidia,tegra20-sdhci", 0x78000200, "sdhci-tegra.1", NULL),
@@ -52,6 +47,7 @@ struct of_dev_auxdata tegra30_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000C700, "tegra-i2c.3", NULL),
 	OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000D000, "tegra-i2c.4", NULL),
 	OF_DEV_AUXDATA("nvidia,tegra30-ahub", 0x70080000, "tegra30-ahub", NULL),
+	OF_DEV_AUXDATA("nvidia,tegra30-apbdma", 0x6000a000, "tegra-apbdma", NULL),
 	{}
 };
 
@@ -74,7 +70,7 @@ static void __init tegra30_dt_init(void)
 {
 	tegra_clk_init_from_table(tegra_dt_clk_init_table);
 
-	of_platform_populate(NULL, tegra_dt_match_table,
+	of_platform_populate(NULL, of_default_bus_match_table,
 				tegra30_auxdata_lookup, NULL);
 }
 
diff --git a/arch/arm/mach-tegra/board-harmony-pcie.c b/arch/arm/mach-tegra/board-harmony-pcie.c
index 33c4fed..e8c3fda 100644
--- a/arch/arm/mach-tegra/board-harmony-pcie.c
+++ b/arch/arm/mach-tegra/board-harmony-pcie.c
@@ -27,14 +27,11 @@
 
 #ifdef CONFIG_TEGRA_PCI
 
-static int __init harmony_pcie_init(void)
+int __init harmony_pcie_init(void)
 {
 	struct regulator *regulator = NULL;
 	int err;
 
-	if (!machine_is_harmony())
-		return 0;
-
 	err = gpio_request(TEGRA_GPIO_EN_VDD_1V05_GPIO, "EN_VDD_1V05");
 	if (err)
 		return err;
@@ -62,7 +59,15 @@ err_reg:
 	return err;
 }
 
+static int __init harmony_pcie_initcall(void)
+{
+	if (!machine_is_harmony())
+		return 0;
+
+	return harmony_pcie_init();
+}
+
 /* PCI should be initialized after I2C, mfd and regulators */
-subsys_initcall_sync(harmony_pcie_init);
+subsys_initcall_sync(harmony_pcie_initcall);
 
 #endif
diff --git a/arch/arm/mach-tegra/board-harmony-power.c b/arch/arm/mach-tegra/board-harmony-power.c
index 82f32300..44dcb2e 100644
--- a/arch/arm/mach-tegra/board-harmony-power.c
+++ b/arch/arm/mach-tegra/board-harmony-power.c
@@ -20,6 +20,10 @@
 #include <linux/gpio.h>
 #include <linux/regulator/machine.h>
 #include <linux/mfd/tps6586x.h>
+#include <linux/of.h>
+#include <linux/of_i2c.h>
+
+#include <asm/mach-types.h>
 
 #include <mach/irqs.h>
 
@@ -110,7 +114,26 @@ static struct i2c_board_info __initdata harmony_regulators[] = {
 
 int __init harmony_regulator_init(void)
 {
-	i2c_register_board_info(3, harmony_regulators, 1);
+	if (machine_is_harmony()) {
+		i2c_register_board_info(3, harmony_regulators, 1);
+	} else { /* Harmony, booted using device tree */
+		struct device_node *np;
+		struct i2c_adapter *adapter;
+
+		np = of_find_node_by_path("/i2c@7000d000");
+		if (np == NULL) {
+			pr_err("Could not find device_node for DVC I2C\n");
+			return -ENODEV;
+		}
+
+		adapter = of_find_i2c_adapter_by_node(np);
+		if (!adapter) {
+			pr_err("Could not find i2c_adapter for DVC I2C\n");
+			return -ENODEV;
+		}
+
+		i2c_new_device(adapter, harmony_regulators);
+	}
 
 	return 0;
 }
diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c
index bbc1907..4b64af5 100644
--- a/arch/arm/mach-tegra/board-paz00.c
+++ b/arch/arm/mach-tegra/board-paz00.c
@@ -148,7 +148,6 @@ static struct platform_device *paz00_devices[] __initdata = {
 	&debug_uart,
 	&tegra_sdhci_device4,
 	&tegra_sdhci_device1,
-	&wifi_rfkill_device,
 	&leds_gpio,
 	&gpio_keys_device,
 };
@@ -201,6 +200,11 @@ static struct tegra_sdhci_platform_data sdhci_pdata4 = {
 	.is_8bit	= 1,
 };
 
+void __init tegra_paz00_wifikill_init(void)
+{
+	platform_device_register(&wifi_rfkill_device);
+}
+
 static void __init tegra_paz00_init(void)
 {
 	tegra_clk_init_from_table(paz00_clk_init_table);
@@ -211,6 +215,7 @@ static void __init tegra_paz00_init(void)
 	tegra_sdhci_device4.dev.platform_data = &sdhci_pdata4;
 
 	platform_add_devices(paz00_devices, ARRAY_SIZE(paz00_devices));
+	tegra_paz00_wifikill_init();
 
 	paz00_i2c_init();
 	paz00_usb_init();
diff --git a/arch/arm/mach-tegra/board-seaboard-pinmux.c b/arch/arm/mach-tegra/board-seaboard-pinmux.c
deleted file mode 100644
index 11fc8a5..0000000
--- a/arch/arm/mach-tegra/board-seaboard-pinmux.c
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- * Copyright (C) 2010-2012 NVIDIA Corporation
- * Copyright (C) 2011 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-
-#include "board-seaboard.h"
-#include "board-pinmux.h"
-
-static unsigned long seaboard_pincfg_drive_sdio1[] = {
-	TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_HIGH_SPEED_MODE, 0),
-	TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_SCHMITT, 0),
-	TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_LOW_POWER_MODE, 3),
-	TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_DRIVE_DOWN_STRENGTH, 31),
-	TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_DRIVE_UP_STRENGTH, 31),
-	TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_SLEW_RATE_FALLING, 3),
-	TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_SLEW_RATE_RISING, 3),
-};
-
-static struct pinctrl_map common_map[] = {
-	TEGRA_MAP_MUXCONF("ata",   "ide",           none, driven),
-	TEGRA_MAP_MUXCONF("atb",   "sdio4",         none, driven),
-	TEGRA_MAP_MUXCONF("atc",   "nand",          none, driven),
-	TEGRA_MAP_MUXCONF("atd",   "gmi",           none, driven),
-	TEGRA_MAP_MUXCONF("ate",   "gmi",           none, tristate),
-	TEGRA_MAP_MUXCONF("cdev1", "plla_out",      none, driven),
-	TEGRA_MAP_MUXCONF("cdev2", "pllp_out4",     none, driven),
-	TEGRA_MAP_MUXCONF("crtp",  "crt",           up,   tristate),
-	TEGRA_MAP_MUXCONF("csus",  "vi_sensor_clk", none, tristate),
-	TEGRA_MAP_MUXCONF("dap1",  "dap1",          none, driven),
-	TEGRA_MAP_MUXCONF("dap2",  "dap2",          none, driven),
-	TEGRA_MAP_MUXCONF("dap3",  "dap3",          none, tristate),
-	TEGRA_MAP_MUXCONF("dap4",  "dap4",          none, driven),
-	TEGRA_MAP_MUXCONF("dta",   "vi",            down, driven),
-	TEGRA_MAP_MUXCONF("dtb",   "vi",            down, driven),
-	TEGRA_MAP_MUXCONF("dtc",   "vi",            down, driven),
-	TEGRA_MAP_MUXCONF("dtd",   "vi",            down, driven),
-	TEGRA_MAP_MUXCONF("dte",   "vi",            down, tristate),
-	TEGRA_MAP_MUXCONF("dtf",   "i2c3",          none, driven),
-	TEGRA_MAP_MUXCONF("gma",   "sdio4",         none, driven),
-	TEGRA_MAP_MUXCONF("gmb",   "gmi",           up,   tristate),
-	TEGRA_MAP_MUXCONF("gmc",   "uartd",         none, driven),
-	TEGRA_MAP_MUXCONF("gme",   "sdio4",         none, driven),
-	TEGRA_MAP_MUXCONF("gpu",   "pwm",           none, driven),
-	TEGRA_MAP_MUXCONF("gpu7",  "rtck",          none, driven),
-	TEGRA_MAP_MUXCONF("gpv",   "pcie",          none, tristate),
-	TEGRA_MAP_MUXCONF("hdint", "hdmi",          na,   tristate),
-	TEGRA_MAP_MUXCONF("i2cp",  "i2cp",          none, driven),
-	TEGRA_MAP_MUXCONF("irrx",  "uartb",         none, driven),
-	TEGRA_MAP_MUXCONF("irtx",  "uartb",         none, driven),
-	TEGRA_MAP_MUXCONF("kbca",  "kbc",           up,   driven),
-	TEGRA_MAP_MUXCONF("kbcb",  "kbc",           up,   driven),
-	TEGRA_MAP_MUXCONF("kbcc",  "kbc",           up,   driven),
-	TEGRA_MAP_MUXCONF("kbcd",  "kbc",           up,   driven),
-	TEGRA_MAP_MUXCONF("kbce",  "kbc",           up,   driven),
-	TEGRA_MAP_MUXCONF("kbcf",  "kbc",           up,   driven),
-	TEGRA_MAP_MUXCONF("lcsn",  "rsvd4",         na,   tristate),
-	TEGRA_MAP_MUXCONF("ld0",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld1",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld10",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld11",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld12",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld13",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld14",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld15",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld16",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld17",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld2",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld3",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld4",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld5",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld6",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld7",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld8",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ld9",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("ldc",   "rsvd4",         na,   tristate),
-	TEGRA_MAP_MUXCONF("ldi",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("lhp0",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("lhp1",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("lhp2",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("lhs",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("lm0",   "rsvd4",         na,   driven),
-	TEGRA_MAP_MUXCONF("lm1",   "crt",           na,   tristate),
-	TEGRA_MAP_MUXCONF("lpp",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("lpw1",  "rsvd4",         na,   tristate),
-	TEGRA_MAP_MUXCONF("lsc0",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("lsdi",  "rsvd4",         na,   tristate),
-	TEGRA_MAP_MUXCONF("lspi",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("lvp0",  "rsvd4",         na,   tristate),
-	TEGRA_MAP_MUXCONF("lvp1",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("lvs",   "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("owc",   "rsvd2",         none, tristate),
-	TEGRA_MAP_MUXCONF("pmc",   "pwr_on",        na,   driven),
-	TEGRA_MAP_MUXCONF("pta",   "hdmi",          none, driven),
-	TEGRA_MAP_MUXCONF("rm",    "i2c1",          none, driven),
-	TEGRA_MAP_MUXCONF("sdb",   "sdio3",         na,   driven),
-	TEGRA_MAP_MUXCONF("sdc",   "sdio3",         none, driven),
-	TEGRA_MAP_MUXCONF("sdd",   "sdio3",         none, driven),
-	TEGRA_MAP_MUXCONF("sdio1", "sdio1",         up,   driven),
-	TEGRA_MAP_MUXCONF("slxa",  "pcie",          up,   tristate),
-	TEGRA_MAP_MUXCONF("slxd",  "spdif",         none, driven),
-	TEGRA_MAP_MUXCONF("slxk",  "pcie",          none, driven),
-	TEGRA_MAP_MUXCONF("spdi",  "rsvd2",         none, driven),
-	TEGRA_MAP_MUXCONF("spdo",  "rsvd2",         none, driven),
-	TEGRA_MAP_MUXCONF("spib",  "gmi",           none, tristate),
-	TEGRA_MAP_MUXCONF("spid",  "spi1",          none, tristate),
-	TEGRA_MAP_MUXCONF("spie",  "spi1",          none, tristate),
-	TEGRA_MAP_MUXCONF("spif",  "spi1",          down, tristate),
-	TEGRA_MAP_MUXCONF("spih",  "spi2_alt",      up,   tristate),
-	TEGRA_MAP_MUXCONF("uaa",   "ulpi",          up,   driven),
-	TEGRA_MAP_MUXCONF("uab",   "ulpi",          up,   driven),
-	TEGRA_MAP_MUXCONF("uac",   "rsvd2",         none, driven),
-	TEGRA_MAP_MUXCONF("uad",   "irda",          none, driven),
-	TEGRA_MAP_MUXCONF("uca",   "uartc",         none, driven),
-	TEGRA_MAP_MUXCONF("ucb",   "uartc",         none, driven),
-	TEGRA_MAP_MUXCONF("uda",   "ulpi",          none, driven),
-	TEGRA_MAP_CONF("ck32",    none, na),
-	TEGRA_MAP_CONF("ddrc",    none, na),
-	TEGRA_MAP_CONF("pmca",    none, na),
-	TEGRA_MAP_CONF("pmcb",    none, na),
-	TEGRA_MAP_CONF("pmcc",    none, na),
-	TEGRA_MAP_CONF("pmcd",    none, na),
-	TEGRA_MAP_CONF("pmce",    none, na),
-	TEGRA_MAP_CONF("xm2c",    none, na),
-	TEGRA_MAP_CONF("xm2d",    none, na),
-	TEGRA_MAP_CONF("ls",      up,   na),
-	TEGRA_MAP_CONF("lc",      up,   na),
-	TEGRA_MAP_CONF("ld17_0",  down, na),
-	TEGRA_MAP_CONF("ld19_18", down, na),
-	TEGRA_MAP_CONF("ld21_20", down, na),
-	TEGRA_MAP_CONF("ld23_22", down, na),
-};
-
-static struct pinctrl_map seaboard_map[] = {
-	TEGRA_MAP_MUXCONF("ddc",   "rsvd2",         none, tristate),
-	TEGRA_MAP_MUXCONF("gmd",   "sflash",        none, driven),
-	TEGRA_MAP_MUXCONF("lpw0",  "hdmi",          na,   driven),
-	TEGRA_MAP_MUXCONF("lpw2",  "hdmi",          na,   driven),
-	TEGRA_MAP_MUXCONF("lsc1",  "hdmi",          na,   tristate),
-	TEGRA_MAP_MUXCONF("lsck",  "hdmi",          na,   tristate),
-	TEGRA_MAP_MUXCONF("lsda",  "hdmi",          na,   tristate),
-	TEGRA_MAP_MUXCONF("slxc",  "spdif",         none, tristate),
-	TEGRA_MAP_MUXCONF("spia",  "gmi",           up,   tristate),
-	TEGRA_MAP_MUXCONF("spic",  "gmi",           up,   driven),
-	TEGRA_MAP_MUXCONF("spig",  "spi2_alt",      up,   tristate),
-	PIN_MAP_CONFIGS_GROUP_HOG_DEFAULT(PINMUX_DEV, "drive_sdio1", seaboard_pincfg_drive_sdio1),
-};
-
-static struct pinctrl_map ventana_map[] = {
-	TEGRA_MAP_MUXCONF("ddc",   "rsvd2",         none, driven),
-	TEGRA_MAP_MUXCONF("gmd",   "sflash",        none, tristate),
-	TEGRA_MAP_MUXCONF("lpw0",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("lpw2",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("lsc1",  "displaya",      na,   driven),
-	TEGRA_MAP_MUXCONF("lsck",  "displaya",      na,   tristate),
-	TEGRA_MAP_MUXCONF("lsda",  "displaya",      na,   tristate),
-	TEGRA_MAP_MUXCONF("slxc",  "sdio3",         none, driven),
-	TEGRA_MAP_MUXCONF("spia",  "gmi",           none, tristate),
-	TEGRA_MAP_MUXCONF("spic",  "gmi",           none, tristate),
-	TEGRA_MAP_MUXCONF("spig",  "spi2_alt",      none, tristate),
-};
-
-static struct tegra_board_pinmux_conf common_conf = {
-	.maps = common_map,
-	.map_count = ARRAY_SIZE(common_map),
-};
-
-static struct tegra_board_pinmux_conf seaboard_conf = {
-	.maps = seaboard_map,
-	.map_count = ARRAY_SIZE(seaboard_map),
-};
-
-static struct tegra_board_pinmux_conf ventana_conf = {
-	.maps = ventana_map,
-	.map_count = ARRAY_SIZE(ventana_map),
-};
-
-void seaboard_pinmux_init(void)
-{
-	tegra_board_pinmux_init(&common_conf, &seaboard_conf);
-}
-
-void ventana_pinmux_init(void)
-{
-	tegra_board_pinmux_init(&common_conf, &ventana_conf);
-}
diff --git a/arch/arm/mach-tegra/board-seaboard.c b/arch/arm/mach-tegra/board-seaboard.c
deleted file mode 100644
index 71e9f3f..0000000
--- a/arch/arm/mach-tegra/board-seaboard.c
+++ /dev/null
@@ -1,306 +0,0 @@
-/*
- * Copyright (c) 2010, 2011 NVIDIA Corporation.
- * Copyright (C) 2010, 2011 Google, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/of_serial.h>
-#include <linux/i2c.h>
-#include <linux/delay.h>
-#include <linux/input.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/platform_data/tegra_usb.h>
-
-#include <sound/wm8903.h>
-
-#include <mach/iomap.h>
-#include <mach/irqs.h>
-#include <mach/sdhci.h>
-#include <mach/tegra_wm8903_pdata.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
-
-#include "board.h"
-#include "board-seaboard.h"
-#include "clock.h"
-#include "devices.h"
-#include "gpio-names.h"
-
-static struct plat_serial8250_port debug_uart_platform_data[] = {
-	{
-		/* Memory and IRQ filled in before registration */
-		.flags		= UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
-		.type		= PORT_TEGRA,
-		.handle_break	= tegra_serial_handle_break,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= 216000000,
-	}, {
-		.flags		= 0,
-	}
-};
-
-static struct platform_device debug_uart = {
-	.name = "serial8250",
-	.id = PLAT8250_DEV_PLATFORM,
-	.dev = {
-		.platform_data = debug_uart_platform_data,
-	},
-};
-
-static __initdata struct tegra_clk_init_table seaboard_clk_init_table[] = {
-	/* name		parent		rate		enabled */
-	{ "uartb",	"pll_p",	216000000,	true},
-	{ "uartd",	"pll_p",	216000000,	true},
-	{ "pll_a",	"pll_p_out1",	56448000,	true },
-	{ "pll_a_out0",	"pll_a",	11289600,	true },
-	{ "cdev1",	NULL,		0,		true },
-	{ "i2s1",	"pll_a_out0",	11289600,	false},
-	{ "usbd",	"clk_m",	12000000,	true},
-	{ "usb3",	"clk_m",	12000000,	true},
-	{ NULL,		NULL,		0,		0},
-};
-
-static struct gpio_keys_button seaboard_gpio_keys_buttons[] = {
-	{
-		.code		= SW_LID,
-		.gpio		= TEGRA_GPIO_LIDSWITCH,
-		.active_low	= 0,
-		.desc		= "Lid",
-		.type		= EV_SW,
-		.wakeup		= 1,
-		.debounce_interval = 1,
-	},
-	{
-		.code		= KEY_POWER,
-		.gpio		= TEGRA_GPIO_POWERKEY,
-		.active_low	= 1,
-		.desc		= "Power",
-		.type		= EV_KEY,
-		.wakeup		= 1,
-	},
-};
-
-static struct gpio_keys_platform_data seaboard_gpio_keys = {
-	.buttons	= seaboard_gpio_keys_buttons,
-	.nbuttons	= ARRAY_SIZE(seaboard_gpio_keys_buttons),
-};
-
-static struct platform_device seaboard_gpio_keys_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &seaboard_gpio_keys,
-	}
-};
-
-static struct tegra_sdhci_platform_data sdhci_pdata1 = {
-	.cd_gpio	= -1,
-	.wp_gpio	= -1,
-	.power_gpio	= -1,
-};
-
-static struct tegra_sdhci_platform_data sdhci_pdata3 = {
-	.cd_gpio	= TEGRA_GPIO_SD2_CD,
-	.wp_gpio	= TEGRA_GPIO_SD2_WP,
-	.power_gpio	= TEGRA_GPIO_SD2_POWER,
-};
-
-static struct tegra_sdhci_platform_data sdhci_pdata4 = {
-	.cd_gpio	= -1,
-	.wp_gpio	= -1,
-	.power_gpio	= -1,
-	.is_8bit	= 1,
-};
-
-static struct tegra_wm8903_platform_data seaboard_audio_pdata = {
-	.gpio_spkr_en		= TEGRA_GPIO_SPKR_EN,
-	.gpio_hp_det		= TEGRA_GPIO_HP_DET,
-	.gpio_hp_mute		= -1,
-	.gpio_int_mic_en	= -1,
-	.gpio_ext_mic_en	= -1,
-};
-
-static struct platform_device seaboard_audio_device = {
-	.name	= "tegra-snd-wm8903",
-	.id	= 0,
-	.dev	= {
-		.platform_data  = &seaboard_audio_pdata,
-	},
-};
-
-static struct platform_device *seaboard_devices[] __initdata = {
-	&debug_uart,
-	&tegra_pmu_device,
-	&tegra_sdhci_device4,
-	&tegra_sdhci_device3,
-	&tegra_sdhci_device1,
-	&seaboard_gpio_keys_device,
-	&tegra_i2s_device1,
-	&tegra_das_device,
-	&seaboard_audio_device,
-};
-
-static struct i2c_board_info __initdata isl29018_device = {
-	I2C_BOARD_INFO("isl29018", 0x44),
-};
-
-static struct i2c_board_info __initdata adt7461_device = {
-	I2C_BOARD_INFO("adt7461", 0x4c),
-};
-
-static struct wm8903_platform_data wm8903_pdata = {
-	.irq_active_low = 0,
-	.micdet_cfg = 0,
-	.micdet_delay = 100,
-	.gpio_base = SEABOARD_GPIO_WM8903(0),
-	.gpio_cfg = {
-		0,
-		0,
-		WM8903_GPIO_CONFIG_ZERO,
-		0,
-		0,
-	},
-};
-
-static struct i2c_board_info __initdata wm8903_device = {
-	I2C_BOARD_INFO("wm8903", 0x1a),
-	.platform_data = &wm8903_pdata,
-};
-
-static int seaboard_ehci_init(void)
-{
-	struct tegra_ehci_platform_data *pdata;
-
-	pdata = tegra_ehci1_device.dev.platform_data;
-	pdata->vbus_gpio = TEGRA_GPIO_USB1;
-
-	platform_device_register(&tegra_ehci1_device);
-	platform_device_register(&tegra_ehci3_device);
-
-	return 0;
-}
-
-static void __init seaboard_i2c_init(void)
-{
-	isl29018_device.irq = gpio_to_irq(TEGRA_GPIO_ISL29018_IRQ);
-	i2c_register_board_info(0, &isl29018_device, 1);
-
-	wm8903_device.irq = gpio_to_irq(TEGRA_GPIO_CDC_IRQ);
-	i2c_register_board_info(0, &wm8903_device, 1);
-
-	i2c_register_board_info(3, &adt7461_device, 1);
-
-	platform_device_register(&tegra_i2c_device1);
-	platform_device_register(&tegra_i2c_device2);
-	platform_device_register(&tegra_i2c_device3);
-	platform_device_register(&tegra_i2c_device4);
-}
-
-static void __init seaboard_common_init(void)
-{
-	seaboard_pinmux_init();
-
-	tegra_clk_init_from_table(seaboard_clk_init_table);
-
-	tegra_sdhci_device1.dev.platform_data = &sdhci_pdata1;
-	tegra_sdhci_device3.dev.platform_data = &sdhci_pdata3;
-	tegra_sdhci_device4.dev.platform_data = &sdhci_pdata4;
-
-	platform_add_devices(seaboard_devices, ARRAY_SIZE(seaboard_devices));
-
-	seaboard_ehci_init();
-}
-
-static void __init tegra_seaboard_init(void)
-{
-	/* Seaboard uses UARTD for the debug port. */
-	debug_uart_platform_data[0].membase = IO_ADDRESS(TEGRA_UARTD_BASE);
-	debug_uart_platform_data[0].mapbase = TEGRA_UARTD_BASE;
-	debug_uart_platform_data[0].irq = INT_UARTD;
-
-	seaboard_common_init();
-
-	seaboard_i2c_init();
-}
-
-static void __init tegra_kaen_init(void)
-{
-	/* Kaen uses UARTB for the debug port. */
-	debug_uart_platform_data[0].membase = IO_ADDRESS(TEGRA_UARTB_BASE);
-	debug_uart_platform_data[0].mapbase = TEGRA_UARTB_BASE;
-	debug_uart_platform_data[0].irq = INT_UARTB;
-
-	seaboard_audio_pdata.gpio_hp_mute = TEGRA_GPIO_KAEN_HP_MUTE;
-
-	seaboard_common_init();
-
-	seaboard_i2c_init();
-}
-
-static void __init tegra_wario_init(void)
-{
-	/* Wario uses UARTB for the debug port. */
-	debug_uart_platform_data[0].membase = IO_ADDRESS(TEGRA_UARTB_BASE);
-	debug_uart_platform_data[0].mapbase = TEGRA_UARTB_BASE;
-	debug_uart_platform_data[0].irq = INT_UARTB;
-
-	seaboard_common_init();
-
-	seaboard_i2c_init();
-}
-
-
-MACHINE_START(SEABOARD, "seaboard")
-	.atag_offset    = 0x100,
-	.map_io         = tegra_map_common_io,
-	.init_early     = tegra20_init_early,
-	.init_irq       = tegra_init_irq,
-	.handle_irq	= gic_handle_irq,
-	.timer          = &tegra_timer,
-	.init_machine   = tegra_seaboard_init,
-	.init_late	= tegra_init_late,
-	.restart	= tegra_assert_system_reset,
-MACHINE_END
-
-MACHINE_START(KAEN, "kaen")
-	.atag_offset    = 0x100,
-	.map_io         = tegra_map_common_io,
-	.init_early     = tegra20_init_early,
-	.init_irq       = tegra_init_irq,
-	.handle_irq	= gic_handle_irq,
-	.timer          = &tegra_timer,
-	.init_machine   = tegra_kaen_init,
-	.init_late	= tegra_init_late,
-	.restart	= tegra_assert_system_reset,
-MACHINE_END
-
-MACHINE_START(WARIO, "wario")
-	.atag_offset    = 0x100,
-	.map_io         = tegra_map_common_io,
-	.init_early     = tegra20_init_early,
-	.init_irq       = tegra_init_irq,
-	.handle_irq	= gic_handle_irq,
-	.timer          = &tegra_timer,
-	.init_machine   = tegra_wario_init,
-	.init_late	= tegra_init_late,
-	.restart	= tegra_assert_system_reset,
-MACHINE_END
diff --git a/arch/arm/mach-tegra/board-seaboard.h b/arch/arm/mach-tegra/board-seaboard.h
deleted file mode 100644
index 4c45d4c..0000000
--- a/arch/arm/mach-tegra/board-seaboard.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * arch/arm/mach-tegra/board-seaboard.h
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef _MACH_TEGRA_BOARD_SEABOARD_H
-#define _MACH_TEGRA_BOARD_SEABOARD_H
-
-#include <mach/gpio-tegra.h>
-
-#define SEABOARD_GPIO_TPS6586X(_x_)	(TEGRA_NR_GPIOS + (_x_))
-#define SEABOARD_GPIO_WM8903(_x_)	(SEABOARD_GPIO_TPS6586X(4) + (_x_))
-
-#define TEGRA_GPIO_SD2_CD		TEGRA_GPIO_PI5
-#define TEGRA_GPIO_SD2_WP		TEGRA_GPIO_PH1
-#define TEGRA_GPIO_SD2_POWER		TEGRA_GPIO_PI6
-#define TEGRA_GPIO_LIDSWITCH		TEGRA_GPIO_PC7
-#define TEGRA_GPIO_USB1			TEGRA_GPIO_PD0
-#define TEGRA_GPIO_POWERKEY		TEGRA_GPIO_PV2
-#define TEGRA_GPIO_BACKLIGHT		TEGRA_GPIO_PD4
-#define TEGRA_GPIO_LVDS_SHUTDOWN	TEGRA_GPIO_PB2
-#define TEGRA_GPIO_BACKLIGHT_PWM	TEGRA_GPIO_PU5
-#define TEGRA_GPIO_BACKLIGHT_VDD	TEGRA_GPIO_PW0
-#define TEGRA_GPIO_EN_VDD_PNL		TEGRA_GPIO_PC6
-#define TEGRA_GPIO_MAGNETOMETER		TEGRA_GPIO_PN5
-#define TEGRA_GPIO_ISL29018_IRQ		TEGRA_GPIO_PZ2
-#define TEGRA_GPIO_AC_ONLINE		TEGRA_GPIO_PV3
-#define TEGRA_GPIO_WWAN_PWR		SEABOARD_GPIO_TPS6586X(2)
-#define TEGRA_GPIO_CDC_IRQ		TEGRA_GPIO_PX3
-#define TEGRA_GPIO_SPKR_EN		SEABOARD_GPIO_WM8903(2)
-#define TEGRA_GPIO_HP_DET		TEGRA_GPIO_PX1
-#define TEGRA_GPIO_KAEN_HP_MUTE		TEGRA_GPIO_PA5
-
-void seaboard_pinmux_init(void);
-
-#endif
diff --git a/arch/arm/mach-tegra/board.h b/arch/arm/mach-tegra/board.h
index 6501496..f88e514 100644
--- a/arch/arm/mach-tegra/board.h
+++ b/arch/arm/mach-tegra/board.h
@@ -46,5 +46,14 @@ int __init tegra_powergate_debugfs_init(void);
 static inline int tegra_powergate_debugfs_init(void) { return 0; }
 #endif
 
+int __init harmony_regulator_init(void);
+#ifdef CONFIG_TEGRA_PCI
+int __init harmony_pcie_init(void);
+#else
+static inline int harmony_pcie_init(void) { return 0; }
+#endif
+
+void __init tegra_paz00_wifikill_init(void);
+
 extern struct sys_timer tegra_timer;
 #endif