[POWERPC] Move the exception macros into a header file

It makes head_64.S a bit more readable and will allow us to move the
iSeries exceptions elsewhere.

This also removes the last line of the comment:

 * The following macros define the code that appears as
 * the prologue to each of the exception handlers.  They
 * are split into two parts to allow a single kernel binary
 * to be used for pSeries and iSeries.
 * LOL.  One day... - paulus

Anything is possible. :-)

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

1 files changed, 1 insertions, 335 deletions

diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 97f089b..fe6122b 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -35,6 +35,7 @@
 #include <asm/thread_info.h>
 #include <asm/firmware.h>
 #include <asm/page_64.h>
+#include <asm/exception.h>
 
 #define DO_SOFT_DISABLE
 
@@ -145,344 +146,9 @@ exception_marker:
 	.text
 
 /*
- * The following macros define the code that appears as
- * the prologue to each of the exception handlers.  They
- * are split into two parts to allow a single kernel binary
- * to be used for pSeries and iSeries.
- * LOL.  One day... - paulus
- */
-
-/*
- * We make as much of the exception code common between native
- * exception handlers (including pSeries LPAR) and iSeries LPAR
- * implementations as possible.
- */
-
-/*
  * This is the start of the interrupt handlers for pSeries
  * This code runs with relocation off.
  */
-#define EX_R9		0
-#define EX_R10		8
-#define EX_R11		16
-#define EX_R12		24
-#define EX_R13		32
-#define EX_SRR0		40
-#define EX_DAR		48
-#define EX_DSISR	56
-#define EX_CCR		60
-#define EX_R3		64
-#define EX_LR		72
-
-/*
- * We're short on space and time in the exception prolog, so we can't
- * use the normal SET_REG_IMMEDIATE macro. Normally we just need the
- * low halfword of the address, but for Kdump we need the whole low
- * word.
- */
-#ifdef CONFIG_CRASH_DUMP
-#define LOAD_HANDLER(reg, label)					\
-	oris	reg,reg,(label)@h;	/* virt addr of handler ... */	\
-	ori	reg,reg,(label)@l;	/* .. and the rest */
-#else
-#define LOAD_HANDLER(reg, label)					\
-	ori	reg,reg,(label)@l;	/* virt addr of handler ... */
-#endif
-
-/*
- * Equal to EXCEPTION_PROLOG_PSERIES, except that it forces 64bit mode.
- * The firmware calls the registered system_reset_fwnmi and
- * machine_check_fwnmi handlers in 32bit mode if the cpu happens to run
- * a 32bit application at the time of the event.
- * This firmware bug is present on POWER4 and JS20.
- */
-#define EXCEPTION_PROLOG_PSERIES_FORCE_64BIT(area, label)		\
-	mfspr	r13,SPRN_SPRG3;		/* get paca address into r13 */	\
-	std	r9,area+EX_R9(r13);	/* save r9 - r12 */		\
-	std	r10,area+EX_R10(r13);					\
-	std	r11,area+EX_R11(r13);					\
-	std	r12,area+EX_R12(r13);					\
-	mfspr	r9,SPRN_SPRG1;						\
-	std	r9,area+EX_R13(r13);					\
-	mfcr	r9;							\
-	clrrdi	r12,r13,32;		/* get high part of &label */	\
-	mfmsr	r10;							\
-	/* force 64bit mode */						\
-	li	r11,5;			/* MSR_SF_LG|MSR_ISF_LG */	\
-	rldimi	r10,r11,61,0;		/* insert into top 3 bits */	\
-	/* done 64bit mode */						\
-	mfspr	r11,SPRN_SRR0;		/* save SRR0 */			\
-	LOAD_HANDLER(r12,label)						\
-	ori	r10,r10,MSR_IR|MSR_DR|MSR_RI;				\
-	mtspr	SPRN_SRR0,r12;						\
-	mfspr	r12,SPRN_SRR1;		/* and SRR1 */			\
-	mtspr	SPRN_SRR1,r10;						\
-	rfid;								\
-	b	.	/* prevent speculative execution */
-
-#define EXCEPTION_PROLOG_PSERIES(area, label)				\
-	mfspr	r13,SPRN_SPRG3;		/* get paca address into r13 */	\
-	std	r9,area+EX_R9(r13);	/* save r9 - r12 */		\
-	std	r10,area+EX_R10(r13);					\
-	std	r11,area+EX_R11(r13);					\
-	std	r12,area+EX_R12(r13);					\
-	mfspr	r9,SPRN_SPRG1;						\
-	std	r9,area+EX_R13(r13);					\
-	mfcr	r9;							\
-	clrrdi	r12,r13,32;		/* get high part of &label */	\
-	mfmsr	r10;							\
-	mfspr	r11,SPRN_SRR0;		/* save SRR0 */			\
-	LOAD_HANDLER(r12,label)						\
-	ori	r10,r10,MSR_IR|MSR_DR|MSR_RI;				\
-	mtspr	SPRN_SRR0,r12;						\
-	mfspr	r12,SPRN_SRR1;		/* and SRR1 */			\
-	mtspr	SPRN_SRR1,r10;						\
-	rfid;								\
-	b	.	/* prevent speculative execution */
-
-/*
- * This is the start of the interrupt handlers for iSeries
- * This code runs with relocation on.
- */
-#define EXCEPTION_PROLOG_ISERIES_1(area)				\
-	mfspr	r13,SPRN_SPRG3;		/* get paca address into r13 */	\
-	std	r9,area+EX_R9(r13);	/* save r9 - r12 */		\
-	std	r10,area+EX_R10(r13);					\
-	std	r11,area+EX_R11(r13);					\
-	std	r12,area+EX_R12(r13);					\
-	mfspr	r9,SPRN_SPRG1;						\
-	std	r9,area+EX_R13(r13);					\
-	mfcr	r9
-
-#define EXCEPTION_PROLOG_ISERIES_2					\
-	mfmsr	r10;							\
-	ld	r12,PACALPPACAPTR(r13);					\
-	ld	r11,LPPACASRR0(r12);					\
-	ld	r12,LPPACASRR1(r12);					\
-	ori	r10,r10,MSR_RI;						\
-	mtmsrd	r10,1
-
-/*
- * The common exception prolog is used for all except a few exceptions
- * such as a segment miss on a kernel address.  We have to be prepared
- * to take another exception from the point where we first touch the
- * kernel stack onwards.
- *
- * On entry r13 points to the paca, r9-r13 are saved in the paca,
- * r9 contains the saved CR, r11 and r12 contain the saved SRR0 and
- * SRR1, and relocation is on.
- */
-#define EXCEPTION_PROLOG_COMMON(n, area)				   \
-	andi.	r10,r12,MSR_PR;		/* See if coming from user	*/ \
-	mr	r10,r1;			/* Save r1			*/ \
-	subi	r1,r1,INT_FRAME_SIZE;	/* alloc frame on kernel stack	*/ \
-	beq-	1f;							   \
-	ld	r1,PACAKSAVE(r13);	/* kernel stack to use		*/ \
-1:	cmpdi	cr1,r1,0;		/* check if r1 is in userspace	*/ \
-	bge-	cr1,2f;			/* abort if it is		*/ \
-	b	3f;							   \
-2:	li	r1,(n);			/* will be reloaded later	*/ \
-	sth	r1,PACA_TRAP_SAVE(r13);					   \
-	b	bad_stack;						   \
-3:	std	r9,_CCR(r1);		/* save CR in stackframe	*/ \
-	std	r11,_NIP(r1);		/* save SRR0 in stackframe	*/ \
-	std	r12,_MSR(r1);		/* save SRR1 in stackframe	*/ \
-	std	r10,0(r1);		/* make stack chain pointer	*/ \
-	std	r0,GPR0(r1);		/* save r0 in stackframe	*/ \
-	std	r10,GPR1(r1);		/* save r1 in stackframe	*/ \
-	ACCOUNT_CPU_USER_ENTRY(r9, r10);				   \
-	std	r2,GPR2(r1);		/* save r2 in stackframe	*/ \
-	SAVE_4GPRS(3, r1);		/* save r3 - r6 in stackframe	*/ \
-	SAVE_2GPRS(7, r1);		/* save r7, r8 in stackframe	*/ \
-	ld	r9,area+EX_R9(r13);	/* move r9, r10 to stackframe	*/ \
-	ld	r10,area+EX_R10(r13);					   \
-	std	r9,GPR9(r1);						   \
-	std	r10,GPR10(r1);						   \
-	ld	r9,area+EX_R11(r13);	/* move r11 - r13 to stackframe	*/ \
-	ld	r10,area+EX_R12(r13);					   \
-	ld	r11,area+EX_R13(r13);					   \
-	std	r9,GPR11(r1);						   \
-	std	r10,GPR12(r1);						   \
-	std	r11,GPR13(r1);						   \
-	ld	r2,PACATOC(r13);	/* get kernel TOC into r2	*/ \
-	mflr	r9;			/* save LR in stackframe	*/ \
-	std	r9,_LINK(r1);						   \
-	mfctr	r10;			/* save CTR in stackframe	*/ \
-	std	r10,_CTR(r1);						   \
-	lbz	r10,PACASOFTIRQEN(r13);				   \
-	mfspr	r11,SPRN_XER;		/* save XER in stackframe	*/ \
-	std	r10,SOFTE(r1);						   \
-	std	r11,_XER(r1);						   \
-	li	r9,(n)+1;						   \
-	std	r9,_TRAP(r1);		/* set trap number		*/ \
-	li	r10,0;							   \
-	ld	r11,exception_marker@toc(r2);				   \
-	std	r10,RESULT(r1);		/* clear regs->result		*/ \
-	std	r11,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame	*/
-
-/*
- * Exception vectors.
- */
-#define STD_EXCEPTION_PSERIES(n, label)			\
-	. = n;						\
-	.globl label##_pSeries;				\
-label##_pSeries:					\
-	HMT_MEDIUM;					\
-	mtspr	SPRN_SPRG1,r13;		/* save r13 */	\
-	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)
-
-#define HSTD_EXCEPTION_PSERIES(n, label)		\
-	. = n;						\
-	.globl label##_pSeries;				\
-label##_pSeries:					\
-	HMT_MEDIUM;					\
-	mtspr	SPRN_SPRG1,r20;		/* save r20 */	\
-	mfspr	r20,SPRN_HSRR0;		/* copy HSRR0 to SRR0 */ \
-	mtspr	SPRN_SRR0,r20;				\
-	mfspr	r20,SPRN_HSRR1;		/* copy HSRR0 to SRR0 */ \
-	mtspr	SPRN_SRR1,r20;				\
-	mfspr	r20,SPRN_SPRG1;		/* restore r20 */ \
-	mtspr	SPRN_SPRG1,r13;		/* save r13 */	\
-	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)
-
-
-#define MASKABLE_EXCEPTION_PSERIES(n, label)				\
-	. = n;								\
-	.globl label##_pSeries;						\
-label##_pSeries:							\
-	HMT_MEDIUM;							\
-	mtspr	SPRN_SPRG1,r13;		/* save r13 */			\
-	mfspr	r13,SPRN_SPRG3;		/* get paca address into r13 */	\
-	std	r9,PACA_EXGEN+EX_R9(r13);	/* save r9, r10 */	\
-	std	r10,PACA_EXGEN+EX_R10(r13);				\
-	lbz	r10,PACASOFTIRQEN(r13);					\
-	mfcr	r9;							\
-	cmpwi	r10,0;							\
-	beq	masked_interrupt;					\
-	mfspr	r10,SPRN_SPRG1;						\
-	std	r10,PACA_EXGEN+EX_R13(r13);				\
-	std	r11,PACA_EXGEN+EX_R11(r13);				\
-	std	r12,PACA_EXGEN+EX_R12(r13);				\
-	clrrdi	r12,r13,32;		/* get high part of &label */	\
-	mfmsr	r10;							\
-	mfspr	r11,SPRN_SRR0;		/* save SRR0 */			\
-	LOAD_HANDLER(r12,label##_common)				\
-	ori	r10,r10,MSR_IR|MSR_DR|MSR_RI;				\
-	mtspr	SPRN_SRR0,r12;						\
-	mfspr	r12,SPRN_SRR1;		/* and SRR1 */			\
-	mtspr	SPRN_SRR1,r10;						\
-	rfid;								\
-	b	.	/* prevent speculative execution */
-
-#define STD_EXCEPTION_ISERIES(n, label, area)		\
-	.globl label##_iSeries;				\
-label##_iSeries:					\
-	HMT_MEDIUM;					\
-	mtspr	SPRN_SPRG1,r13;		/* save r13 */	\
-	EXCEPTION_PROLOG_ISERIES_1(area);		\
-	EXCEPTION_PROLOG_ISERIES_2;			\
-	b	label##_common
-
-#define MASKABLE_EXCEPTION_ISERIES(n, label)				\
-	.globl label##_iSeries;						\
-label##_iSeries:							\
-	HMT_MEDIUM;							\
-	mtspr	SPRN_SPRG1,r13;		/* save r13 */			\
-	EXCEPTION_PROLOG_ISERIES_1(PACA_EXGEN);				\
-	lbz	r10,PACASOFTIRQEN(r13);					\
-	cmpwi	0,r10,0;						\
-	beq-	label##_iSeries_masked;					\
-	EXCEPTION_PROLOG_ISERIES_2;					\
-	b	label##_common;						\
-
-#ifdef CONFIG_PPC_ISERIES
-#define DISABLE_INTS				\
-	li	r11,0;				\
-	stb	r11,PACASOFTIRQEN(r13);		\
-BEGIN_FW_FTR_SECTION;				\
-	stb	r11,PACAHARDIRQEN(r13);		\
-END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES);	\
-BEGIN_FW_FTR_SECTION;				\
-	mfmsr	r10;				\
-	ori	r10,r10,MSR_EE;			\
-	mtmsrd	r10,1;				\
-END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
-
-#else
-#define DISABLE_INTS				\
-	li	r11,0;				\
-	stb	r11,PACASOFTIRQEN(r13);		\
-	stb	r11,PACAHARDIRQEN(r13)
-
-#endif /* CONFIG_PPC_ISERIES */
-
-#define ENABLE_INTS				\
-	ld	r12,_MSR(r1);			\
-	mfmsr	r11;				\
-	rlwimi	r11,r12,0,MSR_EE;		\
-	mtmsrd	r11,1
-
-#define STD_EXCEPTION_COMMON(trap, label, hdlr)		\
-	.align	7;					\
-	.globl label##_common;				\
-label##_common:						\
-	EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN);	\
-	DISABLE_INTS;					\
-	bl	.save_nvgprs;				\
-	addi	r3,r1,STACK_FRAME_OVERHEAD;		\
-	bl	hdlr;					\
-	b	.ret_from_except
-
-/*
- * Like STD_EXCEPTION_COMMON, but for exceptions that can occur
- * in the idle task and therefore need the special idle handling.
- */
-#define STD_EXCEPTION_COMMON_IDLE(trap, label, hdlr)	\
-	.align	7;					\
-	.globl label##_common;				\
-label##_common:						\
-	EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN);	\
-	FINISH_NAP;					\
-	DISABLE_INTS;					\
-	bl	.save_nvgprs;				\
-	addi	r3,r1,STACK_FRAME_OVERHEAD;		\
-	bl	hdlr;					\
-	b	.ret_from_except
-
-#define STD_EXCEPTION_COMMON_LITE(trap, label, hdlr)	\
-	.align	7;					\
-	.globl label##_common;				\
-label##_common:						\
-	EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN);	\
-	FINISH_NAP;					\
-	DISABLE_INTS;					\
-	bl	.ppc64_runlatch_on;			\
-	addi	r3,r1,STACK_FRAME_OVERHEAD;		\
-	bl	hdlr;					\
-	b	.ret_from_except_lite
-
-/*
- * When the idle code in power4_idle puts the CPU into NAP mode,
- * it has to do so in a loop, and relies on the external interrupt
- * and decrementer interrupt entry code to get it out of the loop.
- * It sets the _TLF_NAPPING bit in current_thread_info()->local_flags
- * to signal that it is in the loop and needs help to get out.
- */
-#ifdef CONFIG_PPC_970_NAP
-#define FINISH_NAP				\
-BEGIN_FTR_SECTION				\
-	clrrdi	r11,r1,THREAD_SHIFT;		\
-	ld	r9,TI_LOCAL_FLAGS(r11);		\
-	andi.	r10,r9,_TLF_NAPPING;		\
-	bnel	power4_fixup_nap;		\
-END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
-#else
-#define FINISH_NAP
-#endif
-
-/*
- * Start of pSeries system interrupt routines
- */
 	. = 0x100
 	.globl __start_interrupts
 __start_interrupts: