irqchip: mips-gic: Stop using per-platform mapping tables

Now that the GIC properly uses IRQ domains, kill off the per-platform
routing tables that were used to make the GIC appear transparent.

This includes:
 - removing the mapping tables and the support for applying them,
 - moving GIC IPI support to the GIC driver,
 - properly routing the i8259 through the GIC on Malta, and
 - updating IRQ assignments on SEAD-3 when the GIC is present.

Platforms no longer will pass an interrupt mapping table to gic_init.
Instead, they will pass the CPU interrupt vector (2 - 7) that they
expect the GIC to route interrupts to.  Note that in EIC mode this
value is ignored and all GIC interrupts are routed to EIC vector 1.

Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Reviewed-by: Qais Yousef <qais.yousef@imgtec.com>
Tested-by: Qais Yousef <qais.yousef@imgtec.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jeffrey Deans <jeffrey.deans@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Jonas Gorski <jogo@openwrt.org>
Cc: John Crispin <blogic@openwrt.org>
Cc: David Daney <ddaney.cavm@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/7816/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 files changed, 93 insertions, 229 deletions

diff --git a/arch/mips/include/asm/gic.h b/arch/mips/include/asm/gic.h
index efcf4de..cfbf907 100644
--- a/arch/mips/include/asm/gic.h
+++ b/arch/mips/include/asm/gic.h
@@ -316,31 +316,6 @@
 	GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_MAP_TO_VPE_REG_OFF(intr, vpe)), \
 		 GIC_SH_MAP_TO_VPE_REG_BIT(vpe))
 
-/*
- * Interrupt Meta-data specification. The ipiflag helps
- * in building ipi_map.
- */
-struct gic_intr_map {
-	unsigned int cpunum;	/* Directed to this CPU */
-#define GIC_UNUSED		0xdead			/* Dummy data */
-	unsigned int pin;	/* Directed to this Pin */
-	unsigned int polarity;	/* Polarity : +/-	*/
-	unsigned int trigtype;	/* Trigger  : Edge/Levl */
-	unsigned int flags;	/* Misc flags	*/
-#define GIC_FLAG_TRANSPARENT   0x01
-};
-
-/*
- * This is only used in EIC mode. This helps to figure out which
- * shared interrupts we need to process when we get a vector interrupt.
- */
-#define GIC_MAX_SHARED_INTR  0x5
-struct gic_shared_intr_map {
-	unsigned int num_shared_intr;
-	unsigned int intr_list[GIC_MAX_SHARED_INTR];
-	unsigned int local_intr_mask;
-};
-
 /* GIC nomenclature for Core Interrupt Pins. */
 #define GIC_CPU_INT0		0 /* Core Interrupt 2 */
 #define GIC_CPU_INT1		1 /* .		      */
@@ -349,6 +324,9 @@ struct gic_shared_intr_map {
 #define GIC_CPU_INT4		4 /* .		      */
 #define GIC_CPU_INT5		5 /* Core Interrupt 7 */
 
+/* Add 2 to convert GIC CPU pin to core interrupt */
+#define GIC_CPU_PIN_OFFSET	2
+
 /* Local GIC interrupts. */
 #define GIC_INT_TMR		(GIC_CPU_INT5)
 #define GIC_INT_PERFCTR		(GIC_CPU_INT5)
@@ -365,13 +343,12 @@ struct gic_shared_intr_map {
 extern unsigned int gic_present;
 extern unsigned int gic_frequency;
 extern unsigned long _gic_base;
-extern unsigned int gic_irq_base;
 extern unsigned int gic_irq_flags[];
-extern struct gic_shared_intr_map gic_shared_intr_map[];
+extern unsigned int gic_cpu_pin;
 
 extern void gic_init(unsigned long gic_base_addr,
-	unsigned long gic_addrspace_size, struct gic_intr_map *intrmap,
-	unsigned int intrmap_size, unsigned int irqbase);
+	unsigned long gic_addrspace_size, unsigned int cpu_vec,
+	unsigned int irqbase);
 extern void gic_clocksource_init(unsigned int);
 extern unsigned int gic_compare_int (void);
 extern cycle_t gic_read_count(void);
diff --git a/arch/mips/include/asm/mips-boards/maltaint.h b/arch/mips/include/asm/mips-boards/maltaint.h
index d741628..bdd6f39 100644
--- a/arch/mips/include/asm/mips-boards/maltaint.h
+++ b/arch/mips/include/asm/mips-boards/maltaint.h
@@ -20,11 +20,10 @@
 #define MIPSCPU_INT_SW1		1
 #define MIPSCPU_INT_MB0		2
 #define MIPSCPU_INT_I8259A	MIPSCPU_INT_MB0
+#define MIPSCPU_INT_GIC		MIPSCPU_INT_MB0 /* GIC chained interrupt */
 #define MIPSCPU_INT_MB1		3
 #define MIPSCPU_INT_SMI		MIPSCPU_INT_MB1
-#define MIPSCPU_INT_IPI0	MIPSCPU_INT_MB1 /* GIC IPI */
 #define MIPSCPU_INT_MB2		4
-#define MIPSCPU_INT_IPI1	MIPSCPU_INT_MB2 /* GIC IPI */
 #define MIPSCPU_INT_MB3		5
 #define MIPSCPU_INT_COREHI	MIPSCPU_INT_MB3
 #define MIPSCPU_INT_MB4		6
@@ -61,14 +60,7 @@
 #define MSC01E_INT_PERFCTR	10
 #define MSC01E_INT_CPUCTR	11
 
-/* External Interrupts used for IPI */
-#define GIC_IPI_EXT_INTR_RESCHED_VPE0	16
-#define GIC_IPI_EXT_INTR_CALLFNC_VPE0	17
-#define GIC_IPI_EXT_INTR_RESCHED_VPE1	18
-#define GIC_IPI_EXT_INTR_CALLFNC_VPE1	19
-#define GIC_IPI_EXT_INTR_RESCHED_VPE2	20
-#define GIC_IPI_EXT_INTR_CALLFNC_VPE2	21
-#define GIC_IPI_EXT_INTR_RESCHED_VPE3	22
-#define GIC_IPI_EXT_INTR_CALLFNC_VPE3	23
+/* GIC external interrupts */
+#define GIC_INT_I8259A		3
 
 #endif /* !(_MIPS_MALTAINT_H) */
diff --git a/arch/mips/include/asm/mips-boards/sead3int.h b/arch/mips/include/asm/mips-boards/sead3int.h
index 11ebec9..a2e0095 100644
--- a/arch/mips/include/asm/mips-boards/sead3int.h
+++ b/arch/mips/include/asm/mips-boards/sead3int.h
@@ -14,4 +14,17 @@
 #define GIC_BASE_ADDR		0x1b1c0000
 #define GIC_ADDRSPACE_SZ	(128 * 1024)
 
+/* CPU interrupt offsets */
+#define CPU_INT_GIC		2
+#define CPU_INT_EHCI		2
+#define CPU_INT_UART0		4
+#define CPU_INT_UART1		4
+#define CPU_INT_NET		6
+
+/* GIC interrupt offsets */
+#define GIC_INT_NET		0
+#define GIC_INT_UART1		2
+#define GIC_INT_UART0		3
+#define GIC_INT_EHCI		5
+
 #endif /* !(_MIPS_SEAD3INT_H) */
diff --git a/arch/mips/kernel/cevt-gic.c b/arch/mips/kernel/cevt-gic.c
index 6093716..a90bd4c 100644
--- a/arch/mips/kernel/cevt-gic.c
+++ b/arch/mips/kernel/cevt-gic.c
@@ -91,7 +91,8 @@ int gic_clockevent_init(void)
 
 	clockevents_register_device(cd);
 
-	GICWRITE(GIC_REG(VPE_LOCAL, GIC_VPE_COMPARE_MAP), 0x80000002);
+	GICWRITE(GIC_REG(VPE_LOCAL, GIC_VPE_COMPARE_MAP),
+		 GIC_MAP_TO_PIN_MSK | gic_cpu_pin);
 	GICWRITE(GIC_REG(VPE_LOCAL, GIC_VPE_SMASK), GIC_VPE_SMASK_CMP_MSK);
 
 	if (gic_timer_irq_installed)
diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c
index e56563c..3b3bc1d 100644
--- a/arch/mips/mti-malta/malta-int.c
+++ b/arch/mips/mti-malta/malta-int.c
@@ -38,14 +38,9 @@
 #include <asm/rtlx.h>
 
 static unsigned long _msc01_biu_base;
-static unsigned int ipi_map[NR_CPUS];
 
 static DEFINE_RAW_SPINLOCK(mips_irq_lock);
 
-#ifdef CONFIG_MIPS_GIC_IPI
-DECLARE_BITMAP(ipi_ints, GIC_NUM_INTRS);
-#endif
-
 static inline int mips_pcibios_iack(void)
 {
 	int irq;
@@ -127,24 +122,10 @@ static void malta_hw0_irqdispatch(void)
 #endif
 }
 
-static void malta_ipi_irqdispatch(void)
+static irqreturn_t i8259_handler(int irq, void *dev_id)
 {
-#ifdef CONFIG_MIPS_GIC_IPI
-	unsigned long irq;
-	DECLARE_BITMAP(pending, GIC_NUM_INTRS);
-
-	gic_get_int_mask(pending, ipi_ints);
-
-	irq = find_first_bit(pending, GIC_NUM_INTRS);
-
-	while (irq < GIC_NUM_INTRS) {
-		do_IRQ(MIPS_GIC_IRQ_BASE + irq);
-
-		irq = find_next_bit(pending, GIC_NUM_INTRS, irq + 1);
-	}
-#endif
-	if (gic_compare_int())
-		do_IRQ(MIPS_GIC_IRQ_BASE);
+	malta_hw0_irqdispatch();
+	return IRQ_HANDLED;
 }
 
 static void corehi_irqdispatch(void)
@@ -203,6 +184,12 @@ static void corehi_irqdispatch(void)
 	die("CoreHi interrupt", regs);
 }
 
+static irqreturn_t corehi_handler(int irq, void *dev_id)
+{
+	corehi_irqdispatch();
+	return IRQ_HANDLED;
+}
+
 static inline int clz(unsigned long x)
 {
 	__asm__(
@@ -286,10 +273,9 @@ asmlinkage void plat_irq_dispatch(void)
 
 	irq = irq_ffs(pending);
 
-	if (irq == MIPSCPU_INT_I8259A)
-		malta_hw0_irqdispatch();
-	else if (gic_present && ((1 << irq) & ipi_map[smp_processor_id()]))
-		malta_ipi_irqdispatch();
+	/* HACK: GIC doesn't properly dispatch local interrupts yet */
+	if (gic_present && irq == MIPSCPU_INT_GIC && gic_compare_int())
+		do_IRQ(MIPS_GIC_IRQ_BASE);
 	else
 		do_IRQ(MIPS_CPU_IRQ_BASE + irq);
 }
@@ -312,13 +298,6 @@ static void ipi_call_dispatch(void)
 	do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ);
 }
 
-#endif /* CONFIG_MIPS_MT_SMP */
-
-#ifdef CONFIG_MIPS_GIC_IPI
-
-#define GIC_MIPS_CPU_IPI_RESCHED_IRQ	3
-#define GIC_MIPS_CPU_IPI_CALL_IRQ	4
-
 static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id)
 {
 #ifdef CONFIG_MIPS_VPE_APSP_API_CMP
@@ -349,31 +328,16 @@ static struct irqaction irq_call = {
 	.flags		= IRQF_PERCPU,
 	.name		= "IPI_call"
 };
-#endif /* CONFIG_MIPS_GIC_IPI */
-
-static int gic_resched_int_base;
-static int gic_call_int_base;
-#define GIC_RESCHED_INT(cpu) (gic_resched_int_base+(cpu))
-#define GIC_CALL_INT(cpu) (gic_call_int_base+(cpu))
-
-unsigned int plat_ipi_call_int_xlate(unsigned int cpu)
-{
-	return GIC_CALL_INT(cpu);
-}
-
-unsigned int plat_ipi_resched_int_xlate(unsigned int cpu)
-{
-	return GIC_RESCHED_INT(cpu);
-}
+#endif /* CONFIG_MIPS_MT_SMP */
 
 static struct irqaction i8259irq = {
-	.handler = no_action,
+	.handler = i8259_handler,
 	.name = "XT-PIC cascade",
 	.flags = IRQF_NO_THREAD,
 };
 
 static struct irqaction corehi_irqaction = {
-	.handler = no_action,
+	.handler = corehi_handler,
 	.name = "CoreHi",
 	.flags = IRQF_NO_THREAD,
 };
@@ -399,60 +363,6 @@ static msc_irqmap_t msc_eicirqmap[] __initdata = {
 
 static int msc_nr_eicirqs __initdata = ARRAY_SIZE(msc_eicirqmap);
 
-/*
- * This GIC specific tabular array defines the association between External
- * Interrupts and CPUs/Core Interrupts. The nature of the External
- * Interrupts is also defined here - polarity/trigger.
- */
-
-#define GIC_CPU_NMI GIC_MAP_TO_NMI_MSK
-#define X GIC_UNUSED
-
-static struct gic_intr_map gic_intr_map[GIC_NUM_INTRS] = {
-	{ X, X,		   X,		X,		0 },
-	{ X, X,		   X,		X,		0 },
-	{ X, X,		   X,		X,		0 },
-	{ 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
-	{ 0, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
-	{ 0, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
-	{ 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
-	{ 0, GIC_CPU_INT4, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
-	{ 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
-	{ 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
-	{ X, X,		   X,		X,		0 },
-	{ X, X,		   X,		X,		0 },
-	{ 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
-	{ 0, GIC_CPU_NMI,  GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
-	{ 0, GIC_CPU_NMI,  GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
-	{ X, X,		   X,		X,		0 },
-	/* The remainder of this table is initialised by fill_ipi_map */
-};
-#undef X
-
-#ifdef CONFIG_MIPS_GIC_IPI
-static void __init fill_ipi_map1(int baseintr, int cpu, int cpupin)
-{
-	int intr = baseintr + cpu;
-	gic_intr_map[intr].cpunum = cpu;
-	gic_intr_map[intr].pin = cpupin;
-	gic_intr_map[intr].polarity = GIC_POL_POS;
-	gic_intr_map[intr].trigtype = GIC_TRIG_EDGE;
-	gic_intr_map[intr].flags = 0;
-	ipi_map[cpu] |= (1 << (cpupin + 2));
-	bitmap_set(ipi_ints, intr, 1);
-}
-
-static void __init fill_ipi_map(void)
-{
-	int cpu;
-
-	for (cpu = 0; cpu < nr_cpu_ids; cpu++) {
-		fill_ipi_map1(gic_resched_int_base, cpu, GIC_CPU_INT1);
-		fill_ipi_map1(gic_call_int_base, cpu, GIC_CPU_INT2);
-	}
-}
-#endif
-
 void __init arch_init_ipiirq(int irq, struct irqaction *action)
 {
 	setup_irq(irq, action);
@@ -461,6 +371,8 @@ void __init arch_init_ipiirq(int irq, struct irqaction *action)
 
 void __init arch_init_irq(void)
 {
+	int corehi_irq, i8259_irq;
+
 	init_i8259_irqs();
 
 	if (!cpu_has_veic)
@@ -507,34 +419,11 @@ void __init arch_init_irq(void)
 					msc_nr_irqs);
 	}
 
-	if (cpu_has_veic) {
-		set_vi_handler(MSC01E_INT_I8259A, malta_hw0_irqdispatch);
-		set_vi_handler(MSC01E_INT_COREHI, corehi_irqdispatch);
-		setup_irq(MSC01E_INT_BASE+MSC01E_INT_I8259A, &i8259irq);
-		setup_irq(MSC01E_INT_BASE+MSC01E_INT_COREHI, &corehi_irqaction);
-	} else if (cpu_has_vint) {
-		set_vi_handler(MIPSCPU_INT_I8259A, malta_hw0_irqdispatch);
-		set_vi_handler(MIPSCPU_INT_COREHI, corehi_irqdispatch);
-		setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_I8259A, &i8259irq);
-		setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_COREHI,
-						&corehi_irqaction);
-	} else {
-		setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_I8259A, &i8259irq);
-		setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_COREHI,
-						&corehi_irqaction);
-	}
-
 	if (gic_present) {
-		/* FIXME */
 		int i;
-#if defined(CONFIG_MIPS_GIC_IPI)
-		gic_call_int_base = GIC_NUM_INTRS -
-			(NR_CPUS - nr_cpu_ids) * 2 - nr_cpu_ids;
-		gic_resched_int_base = gic_call_int_base - nr_cpu_ids;
-		fill_ipi_map();
-#endif
-		gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, gic_intr_map,
-				ARRAY_SIZE(gic_intr_map), MIPS_GIC_IRQ_BASE);
+
+		gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, MIPSCPU_INT_GIC,
+			 MIPS_GIC_IRQ_BASE);
 		if (!mips_cm_present()) {
 			/* Enable the GIC */
 			i = REG(_msc01_biu_base, MSC01_SC_CFG);
@@ -542,28 +431,8 @@ void __init arch_init_irq(void)
 				(i | (0x1 << MSC01_SC_CFG_GICENA_SHF));
 			pr_debug("GIC Enabled\n");
 		}
-#if defined(CONFIG_MIPS_GIC_IPI)
-		/* set up ipi interrupts */
-		if (cpu_has_vint) {
-			set_vi_handler(MIPSCPU_INT_IPI0, malta_ipi_irqdispatch);
-			set_vi_handler(MIPSCPU_INT_IPI1, malta_ipi_irqdispatch);
-		}
-		/* Argh.. this really needs sorting out.. */
-		pr_info("CPU%d: status register was %08x\n",
-			smp_processor_id(), read_c0_status());
-		write_c0_status(read_c0_status() | STATUSF_IP3 | STATUSF_IP4);
-		pr_info("CPU%d: status register now %08x\n",
-			smp_processor_id(), read_c0_status());
-		write_c0_status(0x1100dc00);
-		pr_info("CPU%d: status register frc %08x\n",
-			smp_processor_id(), read_c0_status());
-		for (i = 0; i < nr_cpu_ids; i++) {
-			arch_init_ipiirq(MIPS_GIC_IRQ_BASE +
-					 GIC_RESCHED_INT(i), &irq_resched);
-			arch_init_ipiirq(MIPS_GIC_IRQ_BASE +
-					 GIC_CALL_INT(i), &irq_call);
-		}
-#endif
+		i8259_irq = MIPS_GIC_IRQ_BASE + GIC_INT_I8259A;
+		corehi_irq = MIPS_CPU_IRQ_BASE + MIPSCPU_INT_COREHI;
 	} else {
 #if defined(CONFIG_MIPS_MT_SMP)
 		/* set up ipi interrupts */
@@ -587,7 +456,21 @@ void __init arch_init_irq(void)
 		arch_init_ipiirq(cpu_ipi_resched_irq, &irq_resched);
 		arch_init_ipiirq(cpu_ipi_call_irq, &irq_call);
 #endif
+		if (cpu_has_veic) {
+			set_vi_handler(MSC01E_INT_I8259A,
+				       malta_hw0_irqdispatch);
+			set_vi_handler(MSC01E_INT_COREHI,
+				       corehi_irqdispatch);
+			i8259_irq = MSC01E_INT_BASE + MSC01E_INT_I8259A;
+			corehi_irq = MSC01E_INT_BASE + MSC01E_INT_COREHI;
+		} else {
+			i8259_irq = MIPS_CPU_IRQ_BASE + MIPSCPU_INT_I8259A;
+			corehi_irq = MIPS_CPU_IRQ_BASE + MIPSCPU_INT_COREHI;
+		}
 	}
+
+	setup_irq(i8259_irq, &i8259irq);
+	setup_irq(corehi_irq, &corehi_irqaction);
 }
 
 void malta_be_init(void)
diff --git a/arch/mips/mti-sead3/sead3-ehci.c b/arch/mips/mti-sead3/sead3-ehci.c
index 772fc05..4ddaa0f 100644
--- a/arch/mips/mti-sead3/sead3-ehci.c
+++ b/arch/mips/mti-sead3/sead3-ehci.c
@@ -10,6 +10,9 @@
 #include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
 
+#include <asm/gic.h>
+#include <asm/mips-boards/sead3int.h>
+
 struct resource ehci_resources[] = {
 	{
 		.start			= 0x1b200000,
@@ -17,7 +20,6 @@ struct resource ehci_resources[] = {
 		.flags			= IORESOURCE_MEM
 	},
 	{
-		.start			= MIPS_CPU_IRQ_BASE + 2,
 		.flags			= IORESOURCE_IRQ
 	}
 };
@@ -37,6 +39,10 @@ static struct platform_device ehci_device = {
 
 static int __init ehci_init(void)
 {
+	if (gic_present)
+		ehci_resources[1].start = MIPS_GIC_IRQ_BASE + GIC_INT_EHCI;
+	else
+		ehci_resources[1].start = MIPS_CPU_IRQ_BASE + CPU_INT_EHCI;
 	return platform_device_register(&ehci_device);
 }
 
diff --git a/arch/mips/mti-sead3/sead3-int.c b/arch/mips/mti-sead3/sead3-int.c
index 8f36342..cb06cd9 100644
--- a/arch/mips/mti-sead3/sead3-int.c
+++ b/arch/mips/mti-sead3/sead3-int.c
@@ -22,30 +22,6 @@
 
 static unsigned long sead3_config_reg;
 
-/*
- * This table defines the setup for each external GIC interrupt. It is
- * indexed by interrupt number.
- */
-#define GIC_CPU_NMI GIC_MAP_TO_NMI_MSK
-static struct gic_intr_map gic_intr_map[GIC_NUM_INTRS] = {
-	{ 0, GIC_CPU_INT4, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
-	{ 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
-	{ 0, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
-	{ 0, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
-	{ 0, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
-	{ 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
-	{ 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
-	{ 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
-	{ 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
-	{ GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED },
-	{ GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED },
-	{ GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED },
-	{ GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED },
-	{ GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED },
-	{ GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED },
-	{ GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED },
-};
-
 asmlinkage void plat_irq_dispatch(void)
 {
 	unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
@@ -81,7 +57,7 @@ void __init arch_init_irq(void)
 		(current_cpu_data.options & MIPS_CPU_VEIC) ?  "on" : "off");
 
 	if (gic_present)
-		gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, gic_intr_map,
-			ARRAY_SIZE(gic_intr_map), MIPS_GIC_IRQ_BASE);
+		gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, CPU_INT_GIC,
+			 MIPS_GIC_IRQ_BASE);
 }
 
diff --git a/arch/mips/mti-sead3/sead3-net.c b/arch/mips/mti-sead3/sead3-net.c
index dd11e7e..c9f728a 100644
--- a/arch/mips/mti-sead3/sead3-net.c
+++ b/arch/mips/mti-sead3/sead3-net.c
@@ -10,6 +10,9 @@
 #include <linux/platform_device.h>
 #include <linux/smsc911x.h>
 
+#include <asm/gic.h>
+#include <asm/mips-boards/sead3int.h>
+
 static struct smsc911x_platform_config sead3_smsc911x_data = {
 	.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
 	.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
@@ -17,14 +20,13 @@ static struct smsc911x_platform_config sead3_smsc911x_data = {
 	.phy_interface = PHY_INTERFACE_MODE_MII,
 };
 
-struct resource sead3_net_resourcess[] = {
+struct resource sead3_net_resources[] = {
 	{
 		.start			= 0x1f010000,
 		.end			= 0x1f01ffff,
 		.flags			= IORESOURCE_MEM
 	},
 	{
-		.start			= MIPS_CPU_IRQ_BASE + 6,
 		.flags			= IORESOURCE_IRQ
 	}
 };
@@ -35,12 +37,16 @@ static struct platform_device sead3_net_device = {
 	.dev			= {
 		.platform_data	= &sead3_smsc911x_data,
 	},
-	.num_resources		= ARRAY_SIZE(sead3_net_resourcess),
-	.resource		= sead3_net_resourcess
+	.num_resources		= ARRAY_SIZE(sead3_net_resources),
+	.resource		= sead3_net_resources
 };
 
 static int __init sead3_net_init(void)
 {
+	if (gic_present)
+		sead3_net_resources[1].start = MIPS_GIC_IRQ_BASE + GIC_INT_NET;
+	else
+		sead3_net_resources[1].start = MIPS_CPU_IRQ_BASE + CPU_INT_NET;
 	return platform_device_register(&sead3_net_device);
 }
 
diff --git a/arch/mips/mti-sead3/sead3-platform.c b/arch/mips/mti-sead3/sead3-platform.c
index 6c3b33d..d9661eb 100644
--- a/arch/mips/mti-sead3/sead3-platform.c
+++ b/arch/mips/mti-sead3/sead3-platform.c
@@ -9,10 +9,13 @@
 #include <linux/init.h>
 #include <linux/serial_8250.h>
 
-#define UART(base, int)							\
+#include <asm/gic.h>
+#include <asm/mips-boards/sead3int.h>
+
+#define UART(base)							\
 {									\
 	.mapbase	= base,						\
-	.irq		= int,						\
+	.irq		= -1,						\
 	.uartclk	= 14745600,					\
 	.iotype		= UPIO_MEM32,					\
 	.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, \
@@ -20,8 +23,8 @@
 }
 
 static struct plat_serial8250_port uart8250_data[] = {
-	UART(0x1f000900, MIPS_CPU_IRQ_BASE + 4),   /* ttyS0 = USB   */
-	UART(0x1f000800, MIPS_CPU_IRQ_BASE + 4),   /* ttyS1 = RS232 */
+	UART(0x1f000900),   /* ttyS0 = USB   */
+	UART(0x1f000800),   /* ttyS1 = RS232 */
 	{ },
 };
 
@@ -35,6 +38,13 @@ static struct platform_device uart8250_device = {
 
 static int __init uart8250_init(void)
 {
+	if (gic_present) {
+		uart8250_data[0].irq = MIPS_GIC_IRQ_BASE + GIC_INT_UART0;
+		uart8250_data[1].irq = MIPS_GIC_IRQ_BASE + GIC_INT_UART1;
+	} else {
+		uart8250_data[0].irq = MIPS_CPU_IRQ_BASE + CPU_INT_UART0;
+		uart8250_data[1].irq = MIPS_CPU_IRQ_BASE + CPU_INT_UART1;
+	}
 	return platform_device_register(&uart8250_device);
 }