Merge master.kernel.org:/home/rmk/linux-2.6-arm

5 files changed, 23 insertions, 16 deletions

diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c
index b713c44..835d450 100644
--- a/arch/arm/kernel/armksyms.c
+++ b/arch/arm/kernel/armksyms.c
@@ -41,7 +41,10 @@ extern void fp_enter(void);
  * This has a special calling convention; it doesn't
  * modify any of the usual registers, except for LR.
  */
+#define EXPORT_CRC_ALIAS(sym) __CRC_SYMBOL(sym, "")
+
 #define EXPORT_SYMBOL_ALIAS(sym,orig)		\
+ EXPORT_CRC_ALIAS(sym)				\
  const struct kernel_symbol __ksymtab_##sym	\
   __attribute__((section("__ksymtab"))) =	\
     { (unsigned long)&orig, #sym };
diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c
index aa92e37..2b54436 100644
--- a/arch/arm/mach-ixp4xx/common-pci.c
+++ b/arch/arm/mach-ixp4xx/common-pci.c
@@ -453,8 +453,8 @@ int ixp4xx_setup(int nr, struct pci_sys_data *sys)
 	local_write_config(PCI_COMMAND, 2, PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
 
 	res[0].name = "PCI I/O Space";
-	res[0].start = 0x00001000;
-	res[0].end = 0xffff0000;
+	res[0].start = 0x00000000;
+	res[0].end = 0x0000ffff;
 	res[0].flags = IORESOURCE_IO;
 
 	res[1].name = "PCI Memory Space";
diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c
index c6335f5..4ff4393 100644
--- a/arch/arm/mach-ixp4xx/coyote-setup.c
+++ b/arch/arm/mach-ixp4xx/coyote-setup.c
@@ -56,21 +56,24 @@ static struct resource coyote_uart_resource = {
 	.flags	= IORESOURCE_MEM,
 };
 
-static struct plat_serial8250_port coyote_uart_data = {
-	.mapbase	= IXP4XX_UART2_BASE_PHYS,
-	.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-	.irq		= IRQ_IXP4XX_UART2,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.iotype		= UPIO_MEM,
-	.regshift	= 2,
-	.uartclk	= IXP4XX_UART_XTAL,
+static struct plat_serial8250_port coyote_uart_data[] = {
+	{
+		.mapbase	= IXP4XX_UART2_BASE_PHYS,
+		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
+		.irq		= IRQ_IXP4XX_UART2,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP4XX_UART_XTAL,
+	},
+	{ },
 };
 
 static struct platform_device coyote_uart = {
 	.name		= "serial8250",
 	.id		= 0,
 	.dev			= {
-		.platform_data	= &coyote_uart_data,
+		.platform_data	= coyote_uart_data,
 	},
 	.num_resources	= 1,
 	.resource	= &coyote_uart_resource,
@@ -87,10 +90,10 @@ static void __init coyote_init(void)
 	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
 
 	if (machine_is_ixdpg425()) {
-		coyote_uart_data.membase =
+		coyote_uart_data[0].membase =
 			(char*)(IXP4XX_UART1_BASE_VIRT + REG_OFFSET);
-		coyote_uart_data.mapbase = IXP4XX_UART1_BASE_PHYS;
-		coyote_uart_data.irq = IRQ_IXP4XX_UART1;
+		coyote_uart_data[0].mapbase = IXP4XX_UART1_BASE_PHYS;
+		coyote_uart_data[0].irq = IRQ_IXP4XX_UART1;
 	}
 
 
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index f2e9c0e..c2ba759 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -95,7 +95,8 @@ static struct plat_serial8250_port ixdp425_uart_data[] = {
 		.iotype		= UPIO_MEM,
 		.regshift	= 2,
 		.uartclk	= IXP4XX_UART_XTAL,
-	}
+	},
+	{ },
 };
 
 static struct platform_device ixdp425_uart = {
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index e3d8510..352db98 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -200,7 +200,7 @@ __v6_setup:
 	mcr	p15, 0, r4, c2, c0, 1		@ load TTB1
 #ifdef CONFIG_VFP
 	mrc	p15, 0, r0, c1, c0, 2
-	orr	r0, r0, #(3 << 20)
+	orr	r0, r0, #(0xf << 20)
 	mcr	p15, 0, r0, c1, c0, 2		@ Enable full access to VFP
 #endif
 	mrc	p15, 0, r0, c1, c0, 0		@ read control register