Merge branch 'next-s3c24xx-cpufreq' into next-s3c

36 files changed, 3450 insertions, 26 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index aef63c8..f07a4ba 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -126,6 +126,13 @@ config ARCH_HAS_ILOG2_U32
 config ARCH_HAS_ILOG2_U64
 	bool
 
+config ARCH_HAS_CPUFREQ
+	bool
+	help
+	  Internal node to signify that the ARCH has CPUFREQ support
+	  and that the relevant menu configurations are displayed for
+	  it.
+
 config GENERIC_HWEIGHT
 	bool
 	default y
@@ -203,6 +210,7 @@ config ARCH_AAEC2000
 config ARCH_INTEGRATOR
 	bool "ARM Ltd. Integrator family"
 	select ARM_AMBA
+	select ARCH_HAS_CPUFREQ
 	select HAVE_CLK
 	select COMMON_CLKDEV
 	select ICST525
@@ -509,6 +517,7 @@ config ARCH_PXA
 	bool "PXA2xx/PXA3xx-based"
 	depends on MMU
 	select ARCH_MTD_XIP
+	select ARCH_HAS_CPUFREQ
 	select GENERIC_GPIO
 	select HAVE_CLK
 	select COMMON_CLKDEV
@@ -551,6 +560,7 @@ config ARCH_SA1100
 	select ISA
 	select ARCH_SPARSEMEM_ENABLE
 	select ARCH_MTD_XIP
+	select ARCH_HAS_CPUFREQ
 	select GENERIC_GPIO
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
@@ -563,6 +573,7 @@ config ARCH_SA1100
 config ARCH_S3C2410
 	bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"
 	select GENERIC_GPIO
+	select ARCH_HAS_CPUFREQ
 	select HAVE_CLK
 	help
 	  Samsung S3C2410X CPU based systems, such as the Simtec Electronics
@@ -573,6 +584,7 @@ config ARCH_S3C64XX
 	bool "Samsung S3C64XX"
 	select GENERIC_GPIO
 	select HAVE_CLK
+	select ARCH_HAS_CPUFREQ
 	help
 	  Samsung S3C64XX series based systems
 
@@ -632,6 +644,7 @@ config ARCH_OMAP
 	select GENERIC_GPIO
 	select HAVE_CLK
 	select ARCH_REQUIRE_GPIOLIB
+	select ARCH_HAS_CPUFREQ
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	help
@@ -1241,7 +1254,7 @@ endmenu
 
 menu "CPU Power Management"
 
-if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_PXA || ARCH_S3C64XX)
+if ARCH_HAS_CPUFREQ
 
 source "drivers/cpufreq/Kconfig"
 
@@ -1276,6 +1289,52 @@ config CPU_FREQ_S3C64XX
 	bool "CPUfreq support for Samsung S3C64XX CPUs"
 	depends on CPU_FREQ && CPU_S3C6410
 
+config CPU_FREQ_S3C
+	bool
+	help
+	  Internal configuration node for common cpufreq on Samsung SoC
+
+config CPU_FREQ_S3C24XX
+	bool "CPUfreq driver for Samsung S3C24XX series CPUs"
+	depends on ARCH_S3C2410 && CPU_FREQ && EXPERIMENTAL
+	select CPU_FREQ_S3C
+	help
+	  This enables the CPUfreq driver for the Samsung S3C24XX family
+	  of CPUs.
+
+	  For details, take a look at <file:Documentation/cpu-freq>.
+
+	  If in doubt, say N.
+
+config CPU_FREQ_S3C24XX_PLL
+	bool "Support CPUfreq changing of PLL frequency"
+	depends on CPU_FREQ_S3C24XX && EXPERIMENTAL
+	help
+	  Compile in support for changing the PLL frequency from the
+	  S3C24XX series CPUfreq driver. The PLL takes time to settle
+	  after a frequency change, so by default it is not enabled.
+
+	  This also means that the PLL tables for the selected CPU(s) will
+	  be built which may increase the size of the kernel image.
+
+config CPU_FREQ_S3C24XX_DEBUG
+	bool "Debug CPUfreq Samsung driver core"
+	depends on CPU_FREQ_S3C24XX
+	help
+	  Enable s3c_freq_dbg for the Samsung S3C CPUfreq core
+
+config CPU_FREQ_S3C24XX_IODEBUG
+	bool "Debug CPUfreq Samsung driver IO timing"
+	depends on CPU_FREQ_S3C24XX
+	help
+	  Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core
+
+config CPU_FREQ_S3C24XX_DEBUGFS
+	bool "Export debugfs for CPUFreq"
+	depends on CPU_FREQ_S3C24XX && DEBUG_FS
+	help
+	  Export status information via debugfs.
+
 endif
 
 source "drivers/cpuidle/Kconfig"
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 41bb65d..d8c023d 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -12,6 +12,7 @@ config CPU_S3C2410
 	select S3C2410_GPIO
 	select CPU_LLSERIAL_S3C2410
 	select S3C2410_PM if PM
+	select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
 	help
 	  Support for S3C2410 and S3C2410A family from the S3C24XX line
 	  of Samsung Mobile CPUs.
@@ -45,6 +46,22 @@ config MACH_BAST_IDE
 	  Internal node for machines with an BAST style IDE
 	  interface
 
+# cpu frequency scaling support
+
+config S3C2410_CPUFREQ
+	bool
+	depends on CPU_FREQ_S3C24XX && CPU_S3C2410
+	select S3C2410_CPUFREQ_UTILS
+	help
+	  CPU Frequency scaling support for S3C2410
+
+config S3C2410_PLLTABLE
+	bool
+	depends on S3C2410_CPUFREQ && CPU_FREQ_S3C24XX_PLL
+	default y
+	help
+	  Select the PLL table for the S3C2410
+
 menu "S3C2410 Machines"
 
 config ARCH_SMDK2410
@@ -79,6 +96,7 @@ config MACH_N30
 config ARCH_BAST
 	bool "Simtec Electronics BAST (EB2410ITX)"
 	select CPU_S3C2410
+	select S3C2410_IOTIMING if S3C2410_CPUFREQ
 	select PM_SIMTEC if PM
 	select SIMTEC_NOR
 	select MACH_BAST_IDE
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index fca02f8..2ab5ba4 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -15,6 +15,8 @@ obj-$(CONFIG_CPU_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_CPU_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_S3C2410_PM)	+= pm.o sleep.o
 obj-$(CONFIG_S3C2410_GPIO)	+= gpio.o
+obj-$(CONFIG_S3C2410_CPUFREQ)	+= cpu-freq.o
+obj-$(CONFIG_S3C2410_PLLTABLE)	+= pll.o
 
 # Machine support
 
diff --git a/arch/arm/mach-s3c2410/cpu-freq.c b/arch/arm/mach-s3c2410/cpu-freq.c
new file mode 100644
index 0000000..9d11868
--- /dev/null
+++ b/arch/arm/mach-s3c2410/cpu-freq.c
@@ -0,0 +1,159 @@
+/* linux/arch/arm/mach-s3c2410/cpu-freq.c
+ *
+ * Copyright (c) 2006,2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 CPU Frequency scaling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/sysdev.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/cpu-freq-core.h>
+
+/* Note, 2410A has an extra mode for 1:4:4 ratio, bit 2 of CLKDIV */
+
+static void s3c2410_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
+{
+	u32 clkdiv = 0;
+
+	if (cfg->divs.h_divisor == 2)
+		clkdiv |= S3C2410_CLKDIVN_HDIVN;
+
+	if (cfg->divs.p_divisor != cfg->divs.h_divisor)
+		clkdiv |= S3C2410_CLKDIVN_PDIVN;
+
+	__raw_writel(clkdiv, S3C2410_CLKDIVN);
+}
+
+static int s3c2410_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
+{
+	unsigned long hclk, fclk, pclk;
+	unsigned int hdiv, pdiv;
+	unsigned long hclk_max;
+
+	fclk = cfg->freq.fclk;
+	hclk_max = cfg->max.hclk;
+
+	cfg->freq.armclk = fclk;
+
+	s3c_freq_dbg("%s: fclk is %lu, max hclk %lu\n",
+		      __func__, fclk, hclk_max);
+
+	hdiv = (fclk > cfg->max.hclk) ? 2 : 1;
+	hclk = fclk / hdiv;
+
+	if (hclk > cfg->max.hclk) {
+		s3c_freq_dbg("%s: hclk too big\n", __func__);
+		return -EINVAL;
+	}
+
+	pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
+	pclk = hclk / pdiv;
+
+	if (pclk > cfg->max.pclk) {
+		s3c_freq_dbg("%s: pclk too big\n", __func__);
+		return -EINVAL;
+	}
+
+	pdiv *= hdiv;
+
+	/* record the result */
+	cfg->divs.p_divisor = pdiv;
+	cfg->divs.h_divisor = hdiv;
+
+	return 0      ;
+}
+
+static struct s3c_cpufreq_info s3c2410_cpufreq_info = {
+	.max		= {
+		.fclk	= 200000000,
+		.hclk	= 100000000,
+		.pclk	=  50000000,
+	},
+
+	/* transition latency is about 5ms worst-case, so
+	 * set 10ms to be sure */
+	.latency	= 10000000,
+
+	.locktime_m	= 150,
+	.locktime_u	= 150,
+	.locktime_bits	= 12,
+
+	.need_pll	= 1,
+
+	.name		= "s3c2410",
+	.calc_iotiming	= s3c2410_iotiming_calc,
+	.set_iotiming	= s3c2410_iotiming_set,
+	.get_iotiming	= s3c2410_iotiming_get,
+	.resume_clocks	= s3c2410_setup_clocks,
+
+	.set_fvco	= s3c2410_set_fvco,
+	.set_refresh	= s3c2410_cpufreq_setrefresh,
+	.set_divs	= s3c2410_cpufreq_setdivs,
+	.calc_divs	= s3c2410_cpufreq_calcdivs,
+
+	.debug_io_show	= s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
+};
+
+static int s3c2410_cpufreq_add(struct sys_device *sysdev)
+{
+	return s3c_cpufreq_register(&s3c2410_cpufreq_info);
+}
+
+static struct sysdev_driver s3c2410_cpufreq_driver = {
+	.add		= s3c2410_cpufreq_add,
+};
+
+static int __init s3c2410_cpufreq_init(void)
+{
+	return sysdev_driver_register(&s3c2410_sysclass,
+				      &s3c2410_cpufreq_driver);
+}
+
+arch_initcall(s3c2410_cpufreq_init);
+
+static int s3c2410a_cpufreq_add(struct sys_device *sysdev)
+{
+	/* alter the maximum freq settings for S3C2410A. If a board knows
+	 * it only has a maximum of 200, then it should register its own
+	 * limits. */
+
+	s3c2410_cpufreq_info.max.fclk = 266000000;
+	s3c2410_cpufreq_info.max.hclk = 133000000;
+	s3c2410_cpufreq_info.max.pclk =  66500000;
+	s3c2410_cpufreq_info.name = "s3c2410a";
+
+	return s3c2410_cpufreq_add(sysdev);
+}
+
+static struct sysdev_driver s3c2410a_cpufreq_driver = {
+	.add		= s3c2410a_cpufreq_add,
+};
+
+static int __init s3c2410a_cpufreq_init(void)
+{
+	return sysdev_driver_register(&s3c2410a_sysclass,
+				      &s3c2410a_cpufreq_driver);
+}
+
+arch_initcall(s3c2410a_cpufreq_init);
diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index dbf96e6..63b753f 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -164,6 +164,17 @@ static int __init s3c2410_dma_drvinit(void)
 }
 
 arch_initcall(s3c2410_dma_drvinit);
+
+static struct sysdev_driver s3c2410a_dma_driver = {
+	.add	= s3c2410_dma_add,
+};
+
+static int __init s3c2410a_dma_drvinit(void)
+{
+	return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_dma_driver);
+}
+
+arch_initcall(s3c2410a_dma_drvinit);
 #endif
 
 #if defined(CONFIG_CPU_S3C2442)
diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h
index e99b212..11cce09 100644
--- a/arch/arm/mach-s3c2410/include/mach/map.h
+++ b/arch/arm/mach-s3c2410/include/mach/map.h
@@ -67,6 +67,13 @@
 #define S3C2443_PA_HSMMC   (0x4A800000)
 #define S3C2443_SZ_HSMMC   (256)
 
+/* S3C2412 memory and IO controls */
+#define S3C2412_PA_SSMC	(0x4F000000)
+#define S3C2412_VA_SSMC	S3C_ADDR_CPU(0x00000000)
+
+#define S3C2412_PA_EBI	(0x48800000)
+#define S3C2412_VA_EBI	S3C_ADDR_CPU(0x00010000)
+
 /* physical addresses of all the chip-select areas */
 
 #define S3C2410_CS0 (0x00000000)
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-mem.h
index 5775980..7f7c529 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-mem.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-mem.h
@@ -73,6 +73,16 @@
 #define S3C2410_BWSCON_WS7		(1<<30)
 #define S3C2410_BWSCON_ST7		(1<<31)
 
+/* accesor functions for getting BANK(n) configuration. (n != 0) */
+
+#define S3C2410_BWSCON_GET(_bwscon, _bank) (((_bwscon) >> ((_bank) * 4)) & 0xf)
+
+#define S3C2410_BWSCON_DW8		(0)
+#define S3C2410_BWSCON_DW16		(1)
+#define S3C2410_BWSCON_DW32		(2)
+#define S3C2410_BWSCON_WS		(1 << 2)
+#define S3C2410_BWSCON_ST		(1 << 3)
+
 /* memory set (rom, ram) */
 #define S3C2410_BANKCON0		S3C2410_MEMREG(0x0004)
 #define S3C2410_BANKCON1		S3C2410_MEMREG(0x0008)
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h
index a4bf271..fb63525 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h
@@ -14,9 +14,11 @@
 #ifndef __ASM_ARM_REGS_S3C2412_MEM
 #define __ASM_ARM_REGS_S3C2412_MEM
 
-#ifndef S3C2412_MEMREG
 #define S3C2412_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
-#endif
+#define S3C2412_EBIREG(x) (S3C2412_VA_EBI + (x))
+
+#define S3C2412_SSMCREG(x) (S3C2412_VA_SSMC + (x))
+#define S3C2412_SSMC(x, o) (S3C2412_SSMCREG((x * 0x20) + (o)))
 
 #define S3C2412_BANKCFG			S3C2412_MEMREG(0x00)
 #define S3C2412_BANKCON1		S3C2412_MEMREG(0x04)
@@ -26,4 +28,21 @@
 #define S3C2412_REFRESH			S3C2412_MEMREG(0x10)
 #define S3C2412_TIMEOUT			S3C2412_MEMREG(0x14)
 
+/* EBI control registers */
+
+#define S3C2412_EBI_PR			S3C2412_EBIREG(0x00)
+#define S3C2412_EBI_BANKCFG		S3C2412_EBIREG(0x04)
+
+/* SSMC control registers */
+
+#define S3C2412_SSMC_BANK(x)		S3C2412_SSMC(x, 0x00)
+#define S3C2412_SMIDCYR(x)		S3C2412_SSMC(x, 0x00)
+#define S3C2412_SMBWSTRD(x)		S3C2412_SSMC(x, 0x04)
+#define S3C2412_SMBWSTWRR(x)		S3C2412_SSMC(x, 0x08)
+#define S3C2412_SMBWSTOENR(x)		S3C2412_SSMC(x, 0x0C)
+#define S3C2412_SMBWSTWENR(x)		S3C2412_SSMC(x, 0x10)
+#define S3C2412_SMBCR(x)		S3C2412_SSMC(x, 0x14)
+#define S3C2412_SMBSR(x)		S3C2412_SSMC(x, 0x18)
+#define S3C2412_SMBWSTBRDR(x)		S3C2412_SSMC(x, 0x1C)
+
 #endif /*  __ASM_ARM_REGS_S3C2412_MEM */
diff --git a/arch/arm/mach-s3c2410/irq.c b/arch/arm/mach-s3c2410/irq.c
index 9215039..5e2f353 100644
--- a/arch/arm/mach-s3c2410/irq.c
+++ b/arch/arm/mach-s3c2410/irq.c
@@ -39,9 +39,22 @@ static struct sysdev_driver s3c2410_irq_driver = {
 	.resume		= s3c24xx_irq_resume,
 };
 
-static int s3c2410_irq_init(void)
+static int __init s3c2410_irq_init(void)
 {
 	return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_irq_driver);
 }
 
 arch_initcall(s3c2410_irq_init);
+
+static struct sysdev_driver s3c2410a_irq_driver = {
+	.add		= s3c2410_irq_add,
+	.suspend	= s3c24xx_irq_suspend,
+	.resume		= s3c24xx_irq_resume,
+};
+
+static int __init s3c2410a_irq_init(void)
+{
+	return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_irq_driver);
+}
+
+arch_initcall(s3c2410a_irq_init);
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 06670bb..647c9ad 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -60,6 +60,7 @@
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/cpu-freq.h>
 
 #include "usb-simtec.h"
 #include "nor-simtec.h"
@@ -601,6 +602,12 @@ static struct clk *bast_clocks[] __initdata = {
 	&s3c24xx_uclk,
 };
 
+static struct s3c_cpufreq_board __initdata bast_cpufreq = {
+	.refresh	= 7800, /* 7.8usec */
+	.auto_io	= 1,
+	.need_io	= 1,
+};
+
 static void __init bast_map_io(void)
 {
 	/* initialise the clocks */
@@ -640,6 +647,8 @@ static void __init bast_init(void)
 
 	usb_simtec_init();
 	nor_simtec_init();
+
+	s3c_cpufreq_setboard(&bast_cpufreq);
 }
 
 MACHINE_START(BAST, "Simtec-BAST")
diff --git a/arch/arm/mach-s3c2410/pll.c b/arch/arm/mach-s3c2410/pll.c
new file mode 100644
index 0000000..f178c2f
--- /dev/null
+++ b/arch/arm/mach-s3c2410/pll.c
@@ -0,0 +1,95 @@
+/* arch/arm/mach-s3c2410/pll.c
+ *
+ * Copyright (c) 2006,2007 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	Vincent Sanders <vince@arm.linux.org.uk>
+ *
+ * S3C2410 CPU PLL tables
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sysdev.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+
+static struct cpufreq_frequency_table pll_vals_12MHz[] = {
+    { .frequency = 34000000,  .index = PLLVAL(82, 2, 3),   },
+    { .frequency = 45000000,  .index = PLLVAL(82, 1, 3),   },
+    { .frequency = 51000000,  .index = PLLVAL(161, 3, 3),  },
+    { .frequency = 48000000,  .index = PLLVAL(120, 2, 3),  },
+    { .frequency = 56000000,  .index = PLLVAL(142, 2, 3),  },
+    { .frequency = 68000000,  .index = PLLVAL(82, 2, 2),   },
+    { .frequency = 79000000,  .index = PLLVAL(71, 1, 2),   },
+    { .frequency = 85000000,  .index = PLLVAL(105, 2, 2),  },
+    { .frequency = 90000000,  .index = PLLVAL(112, 2, 2),  },
+    { .frequency = 101000000, .index = PLLVAL(127, 2, 2),  },
+    { .frequency = 113000000, .index = PLLVAL(105, 1, 2),  },
+    { .frequency = 118000000, .index = PLLVAL(150, 2, 2),  },
+    { .frequency = 124000000, .index = PLLVAL(116, 1, 2),  },
+    { .frequency = 135000000, .index = PLLVAL(82, 2, 1),   },
+    { .frequency = 147000000, .index = PLLVAL(90, 2, 1),   },
+    { .frequency = 152000000, .index = PLLVAL(68, 1, 1),   },
+    { .frequency = 158000000, .index = PLLVAL(71, 1, 1),   },
+    { .frequency = 170000000, .index = PLLVAL(77, 1, 1),   },
+    { .frequency = 180000000, .index = PLLVAL(82, 1, 1),   },
+    { .frequency = 186000000, .index = PLLVAL(85, 1, 1),   },
+    { .frequency = 192000000, .index = PLLVAL(88, 1, 1),   },
+    { .frequency = 203000000, .index = PLLVAL(161, 3, 1),  },
+
+    /* 2410A extras */
+
+    { .frequency = 210000000, .index = PLLVAL(132, 2, 1),  },
+    { .frequency = 226000000, .index = PLLVAL(105, 1, 1),  },
+    { .frequency = 266000000, .index = PLLVAL(125, 1, 1),  },
+    { .frequency = 268000000, .index = PLLVAL(126, 1, 1),  },
+    { .frequency = 270000000, .index = PLLVAL(127, 1, 1),  },
+};
+
+static int s3c2410_plls_add(struct sys_device *dev)
+{
+	return s3c_plltab_register(pll_vals_12MHz, ARRAY_SIZE(pll_vals_12MHz));
+}
+
+static struct sysdev_driver s3c2410_plls_drv = {
+	.add	= s3c2410_plls_add,
+};
+
+static int __init s3c2410_pll_init(void)
+{
+	return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_plls_drv);
+
+}
+
+arch_initcall(s3c2410_pll_init);
+
+static struct sysdev_driver s3c2410a_plls_drv = {
+	.add	= s3c2410_plls_add,
+};
+
+static int __init s3c2410a_pll_init(void)
+{
+	return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_plls_drv);
+}
+
+arch_initcall(s3c2410a_pll_init);
diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c
index 143e08a..966119c 100644
--- a/arch/arm/mach-s3c2410/pm.c
+++ b/arch/arm/mach-s3c2410/pm.c
@@ -119,6 +119,18 @@ static int __init s3c2410_pm_drvinit(void)
 }
 
 arch_initcall(s3c2410_pm_drvinit);
+
+static struct sysdev_driver s3c2410a_pm_driver = {
+	.add		= s3c2410_pm_add,
+	.resume		= s3c2410_pm_resume,
+};
+
+static int __init s3c2410a_pm_drvinit(void)
+{
+	return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_pm_driver);
+}
+
+arch_initcall(s3c2410a_pm_drvinit);
 #endif
 
 #if defined(CONFIG_CPU_S3C2440)
diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c
index feb141b1..91ba42f 100644
--- a/arch/arm/mach-s3c2410/s3c2410.c
+++ b/arch/arm/mach-s3c2410/s3c2410.c
@@ -105,17 +105,33 @@ void __init_or_cpufreq s3c2410_setup_clocks(void)
 	s3c24xx_setup_clocks(fclk, hclk, pclk);
 }
 
+/* fake ARMCLK for use with cpufreq, etc. */
+
+static struct clk s3c2410_armclk = {
+	.name	= "armclk",
+	.parent	= &clk_f,
+	.id	= -1,
+};
+
 void __init s3c2410_init_clocks(int xtal)
 {
 	s3c24xx_register_baseclocks(xtal);
 	s3c2410_setup_clocks();
 	s3c2410_baseclk_add();
+	s3c24xx_register_clock(&s3c2410_armclk);
 }
 
 struct sysdev_class s3c2410_sysclass = {
 	.name = "s3c2410-core",
 };
 
+/* Note, we would have liked to name this s3c2410-core, but we cannot
+ * register two sysdev_class with the same name.
+ */
+struct sysdev_class s3c2410a_sysclass = {
+	.name = "s3c2410a-core",
+};
+
 static struct sys_device s3c2410_sysdev = {
 	.cls		= &s3c2410_sysclass,
 };
@@ -133,9 +149,22 @@ static int __init s3c2410_core_init(void)
 
 core_initcall(s3c2410_core_init);
 
+static int __init s3c2410a_core_init(void)
+{
+	return sysdev_class_register(&s3c2410a_sysclass);
+}
+
+core_initcall(s3c2410a_core_init);
+
 int __init s3c2410_init(void)
 {
 	printk("S3C2410: Initialising architecture\n");
 
 	return sysdev_register(&s3c2410_sysdev);
 }
+
+int __init s3c2410a_init(void)
+{
+	s3c2410_sysdev.cls = &s3c2410a_sysclass;
+	return s3c2410_init();
+}
diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index 63586ff..35c1bde 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -32,6 +32,15 @@ config S3C2412_PM
 	help
 	  Internal config node to apply S3C2412 power management
 
+# Note, the S3C2412 IOtiming support is in plat-s3c24xx
+
+config S3C2412_CPUFREQ
+	bool
+	depends on CPU_FREQ_S3C24XX && CPU_S3C2412
+	select S3C2412_IOTIMING
+	default y
+	help
+	  CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
 
 menu "S3C2412 Machines"
 
diff --git a/arch/arm/mach-s3c2412/Makefile b/arch/arm/mach-s3c2412/Makefile
index 20918d5..530ec46 100644
--- a/arch/arm/mach-s3c2412/Makefile
+++ b/arch/arm/mach-s3c2412/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_CPU_S3C2412)	+= clock.o
 obj-$(CONFIG_CPU_S3C2412)	+= gpio.o
 obj-$(CONFIG_S3C2412_DMA)	+= dma.o
 obj-$(CONFIG_S3C2412_PM)	+= pm.o sleep.o
+obj-$(CONFIG_S3C2412_CPUFREQ)	+= cpu-freq.o
 
 # Machine support
 
diff --git a/arch/arm/mach-s3c2412/cpu-freq.c b/arch/arm/mach-s3c2412/cpu-freq.c
new file mode 100644
index 0000000..eb3ea17
--- /dev/null
+++ b/arch/arm/mach-s3c2412/cpu-freq.c
@@ -0,0 +1,257 @@
+/* linux/arch/arm/mach-s3c2412/cpu-freq.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2412 CPU Frequency scalling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/sysdev.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-clock.h>
+#include <mach/regs-s3c2412-mem.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/cpu-freq-core.h>
+
+/* our clock resources. */
+static struct clk *xtal;
+static struct clk *fclk;
+static struct clk *hclk;
+static struct clk *armclk;
+
+/* HDIV: 1, 2, 3, 4, 6, 8 */
+
+static int s3c2412_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
+{
+	unsigned int hdiv, pdiv, armdiv, dvs;
+	unsigned long hclk, fclk, armclk, armdiv_clk;
+	unsigned long hclk_max;
+
+	fclk = cfg->freq.fclk;
+	armclk = cfg->freq.armclk;
+	hclk_max = cfg->max.hclk;
+
+	/* We can't run hclk above armclk as at the best we have to
+	 * have armclk and hclk in dvs mode. */
+
+	if (hclk_max > armclk)
+		hclk_max = armclk;
+
+	s3c_freq_dbg("%s: fclk=%lu, armclk=%lu, hclk_max=%lu\n",
+		     __func__, fclk, armclk, hclk_max);
+	s3c_freq_dbg("%s: want f=%lu, arm=%lu, h=%lu, p=%lu\n",
+		     __func__, cfg->freq.fclk, cfg->freq.armclk,
+		     cfg->freq.hclk, cfg->freq.pclk);
+
+	armdiv = fclk / armclk;
+
+	if (armdiv < 1)
+		armdiv = 1;
+	if (armdiv > 2)
+		armdiv = 2;
+
+	cfg->divs.arm_divisor = armdiv;
+	armdiv_clk = fclk / armdiv;
+
+	hdiv = armdiv_clk / hclk_max;
+	if (hdiv < 1)
+		hdiv = 1;
+
+	cfg->freq.hclk = hclk = armdiv_clk / hdiv;
+
+	/* set dvs depending on whether we reached armclk or not. */
+	cfg->divs.dvs = dvs = armclk < armdiv_clk;
+
+	/* update the actual armclk we achieved. */
+	cfg->freq.armclk = dvs ? hclk : armdiv_clk;
+
+	s3c_freq_dbg("%s: armclk %lu, hclk %lu, armdiv %d, hdiv %d, dvs %d\n",
+		     __func__, armclk, hclk, armdiv, hdiv, cfg->divs.dvs);
+
+	if (hdiv > 4)
+		goto invalid;
+
+	pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
+
+	if ((hclk / pdiv) > cfg->max.pclk)
+		pdiv++;
+
+	cfg->freq.pclk = hclk / pdiv;
+
+	s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv);
+
+	if (pdiv > 2)
+		goto invalid;
+
+	pdiv *= hdiv;
+
+	/* store the result, and then return */
+
+	cfg->divs.h_divisor = hdiv * armdiv;
+	cfg->divs.p_divisor = pdiv * armdiv;
+
+	return 0;
+
+ invalid:
+	return -EINVAL;
+}
+
+static void s3c2412_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
+{
+	unsigned long clkdiv;
+	unsigned long olddiv;
+
+	olddiv = clkdiv = __raw_readl(S3C2410_CLKDIVN);
+
+	/* clear off current clock info */
+
+	clkdiv &= ~S3C2412_CLKDIVN_ARMDIVN;
+	clkdiv &= ~S3C2412_CLKDIVN_HDIVN_MASK;
+	clkdiv &= ~S3C2412_CLKDIVN_PDIVN;
+
+	if (cfg->divs.arm_divisor == 2)
+		clkdiv |= S3C2412_CLKDIVN_ARMDIVN;
+
+	clkdiv |= ((cfg->divs.h_divisor / cfg->divs.arm_divisor) - 1);
+
+	if (cfg->divs.p_divisor != cfg->divs.h_divisor)
+		clkdiv |= S3C2412_CLKDIVN_PDIVN;
+
+	s3c_freq_dbg("%s: div %08lx => %08lx\n", __func__, olddiv, clkdiv);
+	__raw_writel(clkdiv, S3C2410_CLKDIVN);
+
+	clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk);
+}
+
+static void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+	struct s3c_cpufreq_board *board = cfg->board;
+	unsigned long refresh;
+
+	s3c_freq_dbg("%s: refresh %u ns, hclk %lu\n", __func__,
+		     board->refresh, cfg->freq.hclk);
+
+	/* Reduce both the refresh time (in ns) and the frequency (in MHz)
+	 * by 10 each to ensure that we do not overflow 32 bit numbers. This
+	 * should work for HCLK up to 133MHz and refresh period up to 30usec.
+	 */
+
+	refresh = (board->refresh / 10);
+	refresh *= (cfg->freq.hclk / 100);
+	refresh /= (1 * 1000 * 1000);	/* 10^6 */
+
+	s3c_freq_dbg("%s: setting refresh 0x%08lx\n", __func__, refresh);
+	__raw_writel(refresh, S3C2412_REFRESH);
+}
+
+/* set the default cpu frequency information, based on an 200MHz part
+ * as we have no other way of detecting the speed rating in software.
+ */
+
+static struct s3c_cpufreq_info s3c2412_cpufreq_info = {
+	.max		= {
+		.fclk	= 200000000,
+		.hclk	= 100000000,
+		.pclk	=  50000000,
+	},
+
+	.latency	= 5000000, /* 5ms */
+
+	.locktime_m	= 150,
+	.locktime_u	= 150,
+	.locktime_bits	= 16,
+
+	.name		= "s3c2412",
+	.set_refresh	= s3c2412_cpufreq_setrefresh,
+	.set_divs	= s3c2412_cpufreq_setdivs,
+	.calc_divs	= s3c2412_cpufreq_calcdivs,
+
+	.calc_iotiming	= s3c2412_iotiming_calc,
+	.set_iotiming	= s3c2412_iotiming_set,
+	.get_iotiming	= s3c2412_iotiming_get,
+
+	.resume_clocks	= s3c2412_setup_clocks,
+
+	.debug_io_show  = s3c_cpufreq_debugfs_call(s3c2412_iotiming_debugfs),
+};
+
+static int s3c2412_cpufreq_add(struct sys_device *sysdev)
+{
+	unsigned long fclk_rate;
+
+	hclk = clk_get(NULL, "hclk");
+	if (IS_ERR(hclk)) {
+		printk(KERN_ERR "%s: cannot find hclk clock\n", __func__);
+		return -ENOENT;
+	}
+
+	fclk = clk_get(NULL, "fclk");
+	if (IS_ERR(fclk)) {
+		printk(KERN_ERR "%s: cannot find fclk clock\n", __func__);
+		goto err_fclk;
+	}
+
+	fclk_rate = clk_get_rate(fclk);
+	if (fclk_rate > 200000000) {
+		printk(KERN_INFO
+		       "%s: fclk %ld MHz, assuming 266MHz capable part\n",
+		       __func__, fclk_rate / 1000000);
+		s3c2412_cpufreq_info.max.fclk = 266000000;
+		s3c2412_cpufreq_info.max.hclk = 133000000;
+		s3c2412_cpufreq_info.max.pclk =  66000000;
+	}
+
+	armclk = clk_get(NULL, "armclk");
+	if (IS_ERR(armclk)) {
+		printk(KERN_ERR "%s: cannot find arm clock\n", __func__);
+		goto err_armclk;
+	}
+
+	xtal = clk_get(NULL, "xtal");
+	if (IS_ERR(xtal)) {
+		printk(KERN_ERR "%s: cannot find xtal clock\n", __func__);
+		goto err_xtal;
+	}
+
+	return s3c_cpufreq_register(&s3c2412_cpufreq_info);
+
+err_xtal:
+	clk_put(armclk);
+err_armclk:
+	clk_put(fclk);
+err_fclk:
+	clk_put(hclk);
+
+	return -ENOENT;
+}
+
+static struct sysdev_driver s3c2412_cpufreq_driver = {
+	.add		= s3c2412_cpufreq_add,
+};
+
+static int s3c2412_cpufreq_init(void)
+{
+	return sysdev_driver_register(&s3c2412_sysclass,
+				      &s3c2412_cpufreq_driver);
+}
+
+arch_initcall(s3c2412_cpufreq_init);
diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c
index 5b5aba6..bef39f7 100644
--- a/arch/arm/mach-s3c2412/s3c2412.c
+++ b/arch/arm/mach-s3c2412/s3c2412.c
@@ -69,6 +69,18 @@ static struct map_desc s3c2412_iodesc[] __initdata = {
 	IODESC_ENT(CLKPWR),
 	IODESC_ENT(TIMER),
 	IODESC_ENT(WATCHDOG),
+	{
+		.virtual = (unsigned long)S3C2412_VA_SSMC,
+		.pfn	 = __phys_to_pfn(S3C2412_PA_SSMC),
+		.length	 = SZ_1M,
+		.type	 = MT_DEVICE,
+	},
+	{
+		.virtual = (unsigned long)S3C2412_VA_EBI,
+		.pfn	 = __phys_to_pfn(S3C2412_PA_EBI),
+		.length	 = SZ_1M,
+		.type	 = MT_DEVICE,
+	},
 };
 
 /* uart registration process */
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index 8cfeaec..8ae1b28 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -33,6 +33,7 @@ config MACH_ANUBIS
 	select PM_SIMTEC if PM
 	select HAVE_PATA_PLATFORM
 	select S3C24XX_GPIO_EXTRA64
+	select S3C2440_XTAL_12000000
 	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Simtec Electronics ANUBIS
@@ -44,6 +45,8 @@ config MACH_OSIRIS
 	select S3C24XX_DCLK
 	select PM_SIMTEC if PM
 	select S3C24XX_GPIO_EXTRA128
+	select S3C2440_XTAL_12000000
+	select S3C2410_IOTIMING if S3C2440_CPUFREQ
 	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Simtec IM2440D20 module, also
@@ -52,6 +55,7 @@ config MACH_OSIRIS
 config MACH_RX3715
 	bool "HP iPAQ rx3715"
 	select CPU_S3C2440
+	select S3C2440_XTAL_16934400
 	select PM_H1940 if PM
 	help
 	  Say Y here if you are using the HP iPAQ rx3715.
@@ -59,6 +63,7 @@ config MACH_RX3715
 config ARCH_S3C2440
 	bool "SMDK2440"
 	select CPU_S3C2440
+	select S3C2440_XTAL_16934400
 	select MACH_SMDK
 	select S3C_DEV_USB_HOST
 	help
@@ -67,6 +72,7 @@ config ARCH_S3C2440
 config MACH_NEXCODER_2440
  	bool "NexVision NEXCODER 2440 Light Board"
  	select CPU_S3C2440
+	select S3C2440_XTAL_12000000
 	select S3C_DEV_USB_HOST
 	help
  	  Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
@@ -75,6 +81,7 @@ config SMDK2440_CPU2440
 	bool "SMDK2440 with S3C2440 CPU module"
 	depends on ARCH_S3C2440
 	default y if ARCH_S3C2440
+	select S3C2440_XTAL_16934400
 	select CPU_S3C2440
 
 config MACH_AT2440EVB
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index cba064b..2105a41 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -34,6 +34,7 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
+#include <plat/cpu-freq.h>
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-mem.h>
@@ -351,6 +352,12 @@ static struct clk *osiris_clocks[] __initdata = {
 	&s3c24xx_uclk,
 };
 
+static struct s3c_cpufreq_board __initdata osiris_cpufreq = {
+	.refresh	= 7800, /* refresh period is 7.8usec */
+	.auto_io	= 1,
+	.need_io	= 1,
+};
+
 static void __init osiris_map_io(void)
 {
 	unsigned long flags;
@@ -402,6 +409,8 @@ static void __init osiris_init(void)
 
 	s3c_i2c0_set_platdata(NULL);
 
+	s3c_cpufreq_setboard(&osiris_cpufreq);
+
 	i2c_register_board_info(0, osiris_i2c_devs,
 				ARRAY_SIZE(osiris_i2c_devs));
 
diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h
index 5057d99..e02e6c3 100644
--- a/arch/arm/mach-s3c6400/include/mach/map.h
+++ b/arch/arm/mach-s3c6400/include/mach/map.h
@@ -49,7 +49,7 @@
 #define S3C64XX_PA_IIC1		(0x7F00F000)
 
 #define S3C64XX_PA_GPIO		(0x7F008000)
-#define S3C64XX_VA_GPIO		S3C_ADDR(0x00500000)
+#define S3C64XX_VA_GPIO		S3C_ADDR_CPU(0x00000000)
 #define S3C64XX_SZ_GPIO		SZ_4K
 
 #define S3C64XX_PA_SDRAM	(0x50000000)
@@ -57,7 +57,7 @@
 #define S3C64XX_PA_VIC1		(0x71300000)
 
 #define S3C64XX_PA_MODEM	(0x74108000)
-#define S3C64XX_VA_MODEM	S3C_ADDR(0x00600000)
+#define S3C64XX_VA_MODEM	S3C_ADDR_CPU(0x00100000)
 
 #define S3C64XX_PA_USBHOST	(0x74300000)
 
diff --git a/arch/arm/plat-s3c/include/plat/cpu-freq.h b/arch/arm/plat-s3c/include/plat/cpu-freq.h
index c86a133..7b982b7 100644
--- a/arch/arm/plat-s3c/include/plat/cpu-freq.h
+++ b/arch/arm/plat-s3c/include/plat/cpu-freq.h
@@ -17,6 +17,21 @@ struct s3c_cpufreq_info;
 struct s3c_cpufreq_board;
 struct s3c_iotimings;
 
+/**
+ * struct s3c_freq - frequency information (mainly for core drivers)
+ * @fclk: The FCLK frequency in Hz.
+ * @armclk: The ARMCLK frequency in Hz.
+ * @hclk_tns: HCLK cycle time in 10ths of nano-seconds.
+ * @hclk: The HCLK frequency in Hz.
+ * @pclk: The PCLK frequency in Hz.
+ *
+ * This contains the frequency information about the current configuration
+ * mainly for the core drivers to ensure we do not end up passing about
+ * a large number of parameters.
+ *
+ * The @hclk_tns field is a useful cache for the parts of the drivers that
+ * need to calculate IO timings and suchlike.
+ */
 struct s3c_freq {
 	unsigned long	fclk;
 	unsigned long	armclk;
@@ -25,48 +40,84 @@ struct s3c_freq {
 	unsigned long	pclk;
 };
 
-/* wrapper 'struct cpufreq_freqs' so that any drivers receiving the
+/**
+ * struct s3c_cpufreq_freqs - s3c cpufreq notification information.
+ * @freqs: The cpufreq setting information.
+ * @old: The old clock settings.
+ * @new: The new clock settings.
+ * @pll_changing: Set if the PLL is changing.
+ *
+ * Wrapper 'struct cpufreq_freqs' so that any drivers receiving the
  * notification can use this information that is not provided by just
  * having the core frequency alone.
+ *
+ * The pll_changing flag is used to indicate if the PLL itself is
+ * being set during this change. This is important as the clocks
+ * will temporarily be set to the XTAL clock during this time, so
+ * drivers may want to close down their output during this time.
+ *
+ * Note, this is not being used by any current drivers and therefore
+ * may be removed in the future.
  */
-
 struct s3c_cpufreq_freqs {
 	struct cpufreq_freqs	freqs;
 	struct s3c_freq		old;
 	struct s3c_freq		new;
+
+	unsigned int		pll_changing:1;
 };
 
 #define to_s3c_cpufreq(_cf) container_of(_cf, struct s3c_cpufreq_freqs, freqs)
 
+/**
+ * struct s3c_clkdivs - clock divisor information
+ * @p_divisor: Divisor from FCLK to PCLK.
+ * @h_divisor: Divisor from FCLK to HCLK.
+ * @arm_divisor: Divisor from FCLK to ARMCLK (not all CPUs).
+ * @dvs: Non-zero if using DVS mode for ARMCLK.
+ *
+ * Divisor settings for the core clocks.
+ */
 struct s3c_clkdivs {
-	int		p_divisor;	/* fclk / pclk */
-	int		h_divisor;	/* fclk / hclk */
-	int		arm_divisor;	/* not all cpus have this. */
-	unsigned char	dvs;		/* using dvs mode to arm. */
+	int		p_divisor;
+	int		h_divisor;
+	int		arm_divisor;
+	unsigned char	dvs;
 };
 
 #define PLLVAL(_m, _p, _s) (((_m) << 12) | ((_p) << 4) | (_s))
 
+/**
+ * struct s3c_pllval - PLL value entry.
+ * @freq: The frequency for this entry in Hz.
+ * @pll_reg: The PLL register setting for this PLL value.
+ */
 struct s3c_pllval {
 	unsigned long		freq;
 	unsigned long		pll_reg;
 };
 
-struct s3c_cpufreq_config {
-	struct s3c_freq		freq;
-	struct s3c_pllval	pll;
-	struct s3c_clkdivs	divs;
-	struct s3c_cpufreq_info *info;	/* for core, not drivers */
-	struct s3c_cpufreq_board *board;
-};
-
-/* s3c_cpufreq_board
+/**
+ * struct s3c_cpufreq_board - per-board cpu frequency informatin
+ * @refresh: The SDRAM refresh period in nanoseconds.
+ * @auto_io: Set if the IO timing settings should be generated from the
+ *	initialisation time hardware registers.
+ * @need_io: Set if the board has external IO on any of the chipselect
+ *	lines that will require the hardware timing registers to be
+ *	updated on a clock change.
+ * @max: The maxium frequency limits for the system. Any field that
+ *	is left at zero will use the CPU's settings.
+ *
+ * This contains the board specific settings that affect how the CPU
+ * drivers chose settings. These include the memory refresh and IO
+ * timing information.
  *
- * per-board configuraton information, such as memory refresh and
- * how to initialise IO timings.
+ * Registration depends on the driver being used, the ARMCLK only
+ * implementation does not currently need this but the older style
+ * driver requires this to be available.
  */
 struct s3c_cpufreq_board {
-	unsigned int	refresh;	/* refresh period in ns */
+	unsigned int	refresh;
 	unsigned int	auto_io:1;	/* automatically init io timings. */
 	unsigned int	need_io:1;	/* set if needs io timing support. */
 
diff --git a/arch/arm/plat-s3c/include/plat/cpu.h b/arch/arm/plat-s3c/include/plat/cpu.h
index be541cb..fbc3d49 100644
--- a/arch/arm/plat-s3c/include/plat/cpu.h
+++ b/arch/arm/plat-s3c/include/plat/cpu.h
@@ -65,6 +65,7 @@ extern struct sys_timer s3c24xx_timer;
 /* system device classes */
 
 extern struct sysdev_class s3c2410_sysclass;
+extern struct sysdev_class s3c2410a_sysclass;
 extern struct sysdev_class s3c2412_sysclass;
 extern struct sysdev_class s3c2440_sysclass;
 extern struct sysdev_class s3c2442_sysclass;
diff --git a/arch/arm/plat-s3c/include/plat/map-base.h b/arch/arm/plat-s3c/include/plat/map-base.h
index b84289d..250be31 100644
--- a/arch/arm/plat-s3c/include/plat/map-base.h
+++ b/arch/arm/plat-s3c/include/plat/map-base.h
@@ -32,9 +32,15 @@
 
 #define S3C_VA_IRQ	S3C_ADDR(0x00000000)	/* irq controller(s) */
 #define S3C_VA_SYS	S3C_ADDR(0x00100000)	/* system control */
-#define S3C_VA_MEM	S3C_ADDR(0x00200000)	/* system control */
+#define S3C_VA_MEM	S3C_ADDR(0x00200000)	/* memory control */
 #define S3C_VA_TIMER	S3C_ADDR(0x00300000)	/* timer block */
 #define S3C_VA_WATCHDOG	S3C_ADDR(0x00400000)	/* watchdog */
 #define S3C_VA_UART	S3C_ADDR(0x01000000)	/* UART */
 
+/* This is used for the CPU specific mappings that may be needed, so that
+ * they do not need to directly used S3C_ADDR() and thus make it easier to
+ * modify the space for mapping.
+ */
+#define S3C_ADDR_CPU(x)	S3C_ADDR(0x00500000 + (x))
+
 #endif /* __ASM_PLAT_MAP_H */
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index aaae456..2f91456 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -34,6 +34,40 @@ config CPU_S3C244X
 	help
 	  Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems.
 
+config S3C2440_CPUFREQ
+	bool "S3C2440/S3C2442 CPU Frequency scaling support"
+	depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
+	select S3C2410_CPUFREQ_UTILS
+	default y
+	help
+	  CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
+
+config S3C2440_XTAL_12000000
+	bool
+	help
+	  Indicate that the build needs to support 12MHz system
+	  crystal.
+
+config S3C2440_XTAL_16934400
+	bool
+	help
+	  Indicate that the build needs to support 16.9344MHz system
+	  crystal.
+
+config S3C2440_PLL_12000000
+	bool
+	depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000
+	default y if CPU_FREQ_S3C24XX_PLL
+	help
+	  PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
+
+config S3C2440_PLL_16934400
+	bool
+	depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400
+	default y if CPU_FREQ_S3C24XX_PLL
+	help
+	  PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
+
 config S3C24XX_PWM
 	bool "PWM device support"
 	select HAVE_PWM
@@ -113,6 +147,31 @@ config S3C24XX_SPI_BUS1_GPD8_GPD9_GPD10
 
 # common code for s3c24xx based machines, such as the SMDKs.
 
+# cpu frequency items common between s3c2410 and s3c2440/s3c2442
+
+config S3C2410_IOTIMING
+	bool
+	depends on CPU_FREQ_S3C24XX
+	help
+	  Internal node to select io timing code that is common to the s3c2410
+	  and s3c2440/s3c2442 cpu frequency support.
+
+config S3C2410_CPUFREQ_UTILS
+	bool
+	depends on CPU_FREQ_S3C24XX
+	help
+	  Internal node to select timing code that is common to the s3c2410
+	  and s3c2440/s3c244 cpu frequency support.
+
+# cpu frequency support common to s3c2412, s3c2413 and s3c2442
+
+config S3C2412_IOTIMING
+	bool
+	depends on CPU_FREQ_S3C24XX && (CPU_S3C2412 || CPU_S3C2443)
+	help
+	  Intel node to select io timing code that is common to the s3c2412
+	  and the s3c2443.
+
 config MACH_SMDK
 	bool
 	help
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 5941679..651315c 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -20,11 +20,18 @@ obj-y				+= gpiolib.o
 obj-y				+= clock.o
 obj-$(CONFIG_S3C24XX_DCLK)	+= clock-dclk.o
 
+obj-$(CONFIG_CPU_FREQ_S3C24XX)	+= cpu-freq.o
+obj-$(CONFIG_CPU_FREQ_S3C24XX_DEBUGFS) += cpu-freq-debugfs.o
+
 # Architecture dependant builds
 
 obj-$(CONFIG_CPU_S3C244X)	+= s3c244x.o
 obj-$(CONFIG_CPU_S3C244X)	+= s3c244x-irq.o
 obj-$(CONFIG_CPU_S3C244X)	+= s3c244x-clock.o
+obj-$(CONFIG_S3C2440_CPUFREQ)	+= s3c2440-cpufreq.o
+obj-$(CONFIG_S3C2440_PLL_12000000) += s3c2440-pll-12000000.o
+obj-$(CONFIG_S3C2440_PLL_16934400) += s3c2440-pll-16934400.o
+
 obj-$(CONFIG_PM_SIMTEC)		+= pm-simtec.o
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_PM)		+= irq-pm.o
@@ -33,6 +40,9 @@ obj-$(CONFIG_S3C24XX_PWM)	+= pwm.o
 obj-$(CONFIG_S3C2410_CLOCK)	+= s3c2410-clock.o
 obj-$(CONFIG_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_S3C24XX_ADC)	+= adc.o
+obj-$(CONFIG_S3C2410_IOTIMING)	+= s3c2410-iotiming.o
+obj-$(CONFIG_S3C2412_IOTIMING)	+= s3c2412-iotiming.o
+obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += s3c2410-cpufreq-utils.o
 
 # device specific setup and/or initialisation
 obj-$(CONFIG_ARCH_S3C2410)	+= setup-i2c.o
diff --git a/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c b/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c
new file mode 100644
index 0000000..a927666
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c
@@ -0,0 +1,199 @@
+/* linux/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c
+ *
+ * Copyright (c) 2009 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX CPU Frequency scaling - debugfs status support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/err.h>
+
+#include <plat/cpu-freq-core.h>
+
+static struct dentry *dbgfs_root;
+static struct dentry *dbgfs_file_io;
+static struct dentry *dbgfs_file_info;
+static struct dentry *dbgfs_file_board;
+
+#define print_ns(x) ((x) / 10), ((x) % 10)
+
+static void show_max(struct seq_file *seq, struct s3c_freq *f)
+{
+	seq_printf(seq, "MAX: F=%lu, H=%lu, P=%lu, A=%lu\n",
+		   f->fclk, f->hclk, f->pclk, f->armclk);
+}
+
+static int board_show(struct seq_file *seq, void *p)
+{
+	struct s3c_cpufreq_config *cfg;
+	struct s3c_cpufreq_board *brd;
+
+	cfg = s3c_cpufreq_getconfig();
+	if (!cfg) {
+		seq_printf(seq, "no configuration registered\n");
+		return 0;
+	}
+
+	brd = cfg->board;
+	if (!brd) {
+		seq_printf(seq, "no board definition set?\n");
+		return 0;
+	}
+
+	seq_printf(seq, "SDRAM refresh %u ns\n", brd->refresh);
+	seq_printf(seq, "auto_io=%u\n", brd->auto_io);
+	seq_printf(seq, "need_io=%u\n", brd->need_io);
+
+	show_max(seq, &brd->max);
+
+
+	return 0;
+}
+
+static int fops_board_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, board_show, NULL);
+}
+
+static const struct file_operations fops_board = {
+	.open		= fops_board_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.owner		= THIS_MODULE,
+};
+
+static int info_show(struct seq_file *seq, void *p)
+{
+	struct s3c_cpufreq_config *cfg;
+
+	cfg = s3c_cpufreq_getconfig();
+	if (!cfg) {
+		seq_printf(seq, "no configuration registered\n");
+		return 0;
+	}
+
+	seq_printf(seq, "  FCLK %ld Hz\n", cfg->freq.fclk);
+	seq_printf(seq, "  HCLK %ld Hz (%lu.%lu ns)\n",
+		   cfg->freq.hclk, print_ns(cfg->freq.hclk_tns));
+	seq_printf(seq, "  PCLK %ld Hz\n", cfg->freq.hclk);
+	seq_printf(seq, "ARMCLK %ld Hz\n", cfg->freq.armclk);
+	seq_printf(seq, "\n");
+
+	show_max(seq, &cfg->max);
+
+	seq_printf(seq, "Divisors: P=%d, H=%d, A=%d, dvs=%s\n",
+		   cfg->divs.h_divisor, cfg->divs.p_divisor,
+		   cfg->divs.arm_divisor, cfg->divs.dvs ? "on" : "off");
+	seq_printf(seq, "\n");
+
+	seq_printf(seq, "lock_pll=%u\n", cfg->lock_pll);
+
+	return 0;
+}
+
+static int fops_info_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, info_show, NULL);
+}
+
+static const struct file_operations fops_info = {
+	.open		= fops_info_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.owner		= THIS_MODULE,
+};
+
+static int io_show(struct seq_file *seq, void *p)
+{
+	void (*show_bank)(struct seq_file *, struct s3c_cpufreq_config *, union s3c_iobank *);
+	struct s3c_cpufreq_config *cfg;
+	struct s3c_iotimings *iot;
+	union s3c_iobank *iob;
+	int bank;
+
+	cfg = s3c_cpufreq_getconfig();
+	if (!cfg) {
+		seq_printf(seq, "no configuration registered\n");
+		return 0;
+	}
+
+	show_bank = cfg->info->debug_io_show;
+	if (!show_bank) {
+		seq_printf(seq, "no code to show bank timing\n");
+		return 0;
+	}
+
+	iot = s3c_cpufreq_getiotimings();
+	if (!iot) {
+		seq_printf(seq, "no io timings registered\n");
+		return 0;
+	}
+
+	seq_printf(seq, "hclk period is %lu.%lu ns\n", print_ns(cfg->freq.hclk_tns));
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		iob = &iot->bank[bank];
+
+		seq_printf(seq, "bank %d: ", bank);
+
+		if (!iob->io_2410) {
+			seq_printf(seq, "nothing set\n");
+			continue;
+		}
+
+		show_bank(seq, cfg, iob);
+	}
+
+	return 0;
+}
+
+static int fops_io_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, io_show, NULL);
+}
+
+static const struct file_operations fops_io = {
+	.open		= fops_io_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.owner		= THIS_MODULE,
+};
+
+
+static int __init s3c_freq_debugfs_init(void)
+{
+	dbgfs_root = debugfs_create_dir("s3c-cpufreq", NULL);
+	if (IS_ERR(dbgfs_root)) {
+		printk(KERN_ERR "%s: error creating debugfs root\n", __func__);
+		return PTR_ERR(dbgfs_root);
+	}
+
+	dbgfs_file_io = debugfs_create_file("io-timing", S_IRUGO, dbgfs_root,
+					    NULL, &fops_io);
+
+	dbgfs_file_info = debugfs_create_file("info", S_IRUGO, dbgfs_root,
+					      NULL, &fops_info);
+
+	dbgfs_file_board = debugfs_create_file("board", S_IRUGO, dbgfs_root,
+					       NULL, &fops_board);
+
+	return 0;
+}
+
+late_initcall(s3c_freq_debugfs_init);
+
diff --git a/arch/arm/plat-s3c24xx/cpu-freq.c b/arch/arm/plat-s3c24xx/cpu-freq.c
new file mode 100644
index 0000000..4f1b789
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/cpu-freq.c
@@ -0,0 +1,716 @@
+/* linux/arch/arm/plat-s3c24xx/cpu-freq.c
+ *
+ * Copyright (c) 2006,2007,2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX CPU Frequency scaling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/cpu.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/kobject.h>
+#include <linux/sysfs.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/cpu-freq-core.h>
+
+#include <mach/regs-clock.h>
+
+/* note, cpufreq support deals in kHz, no Hz */
+
+static struct cpufreq_driver s3c24xx_driver;
+static struct s3c_cpufreq_config cpu_cur;
+static struct s3c_iotimings s3c24xx_iotiming;
+static struct cpufreq_frequency_table *pll_reg;
+static unsigned int last_target = ~0;
+static unsigned int ftab_size;
+static struct cpufreq_frequency_table *ftab;
+
+static struct clk *_clk_mpll;
+static struct clk *_clk_xtal;
+static struct clk *clk_fclk;
+static struct clk *clk_hclk;
+static struct clk *clk_pclk;
+static struct clk *clk_arm;
+
+#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS
+struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void)
+{
+	return &cpu_cur;
+}
+
+struct s3c_iotimings *s3c_cpufreq_getiotimings(void)
+{
+	return &s3c24xx_iotiming;
+}
+#endif /* CONFIG_CPU_FREQ_S3C24XX_DEBUGFS */
+
+static void s3c_cpufreq_getcur(struct s3c_cpufreq_config *cfg)
+{
+	unsigned long fclk, pclk, hclk, armclk;
+
+	cfg->freq.fclk = fclk = clk_get_rate(clk_fclk);
+	cfg->freq.hclk = hclk = clk_get_rate(clk_hclk);
+	cfg->freq.pclk = pclk = clk_get_rate(clk_pclk);
+	cfg->freq.armclk = armclk = clk_get_rate(clk_arm);
+
+	cfg->pll.index = __raw_readl(S3C2410_MPLLCON);
+	cfg->pll.frequency = fclk;
+
+	cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10);
+
+	cfg->divs.h_divisor = fclk / hclk;
+	cfg->divs.p_divisor = fclk / pclk;
+}
+
+static inline void s3c_cpufreq_calc(struct s3c_cpufreq_config *cfg)
+{
+	unsigned long pll = cfg->pll.frequency;
+
+	cfg->freq.fclk = pll;
+	cfg->freq.hclk = pll / cfg->divs.h_divisor;
+	cfg->freq.pclk = pll / cfg->divs.p_divisor;
+
+	/* convert hclk into 10ths of nanoseconds for io calcs */
+	cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10);
+}
+
+static inline int closer(unsigned int target, unsigned int n, unsigned int c)
+{
+	int diff_cur = abs(target - c);
+	int diff_new = abs(target - n);
+
+	return (diff_new < diff_cur);
+}
+
+static void s3c_cpufreq_show(const char *pfx,
+				 struct s3c_cpufreq_config *cfg)
+{
+	s3c_freq_dbg("%s: Fvco=%u, F=%lu, A=%lu, H=%lu (%u), P=%lu (%u)\n",
+		     pfx, cfg->pll.frequency, cfg->freq.fclk, cfg->freq.armclk,
+		     cfg->freq.hclk, cfg->divs.h_divisor,
+		     cfg->freq.pclk, cfg->divs.p_divisor);
+}
+
+/* functions to wrapper the driver info calls to do the cpu specific work */
+
+static void s3c_cpufreq_setio(struct s3c_cpufreq_config *cfg)
+{
+	if (cfg->info->set_iotiming)
+		(cfg->info->set_iotiming)(cfg, &s3c24xx_iotiming);
+}
+
+static int s3c_cpufreq_calcio(struct s3c_cpufreq_config *cfg)
+{
+	if (cfg->info->calc_iotiming)
+		return (cfg->info->calc_iotiming)(cfg, &s3c24xx_iotiming);
+
+	return 0;
+}
+
+static void s3c_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+	(cfg->info->set_refresh)(cfg);
+}
+
+static void s3c_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
+{
+	(cfg->info->set_divs)(cfg);
+}
+
+static int s3c_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
+{
+	return (cfg->info->calc_divs)(cfg);
+}
+
+static void s3c_cpufreq_setfvco(struct s3c_cpufreq_config *cfg)
+{
+	(cfg->info->set_fvco)(cfg);
+}
+
+static inline void s3c_cpufreq_resume_clocks(void)
+{
+	cpu_cur.info->resume_clocks();
+}
+
+static inline void s3c_cpufreq_updateclk(struct clk *clk,
+					 unsigned int freq)
+{
+	clk_set_rate(clk, freq);
+}
+
+static int s3c_cpufreq_settarget(struct cpufreq_policy *policy,
+				 unsigned int target_freq,
+				 struct cpufreq_frequency_table *pll)
+{
+	struct s3c_cpufreq_freqs freqs;
+	struct s3c_cpufreq_config cpu_new;
+	unsigned long flags;
+
+	cpu_new = cpu_cur;  /* copy new from current */
+
+	s3c_cpufreq_show("cur", &cpu_cur);
+
+	/* TODO - check for DMA currently outstanding */
+
+	cpu_new.pll = pll ? *pll : cpu_cur.pll;
+
+	if (pll)
+		freqs.pll_changing = 1;
+
+	/* update our frequencies */
+
+	cpu_new.freq.armclk = target_freq;
+	cpu_new.freq.fclk = cpu_new.pll.frequency;
+
+	if (s3c_cpufreq_calcdivs(&cpu_new) < 0) {
+		printk(KERN_ERR "no divisors for %d\n", target_freq);
+		goto err_notpossible;
+	}
+
+	s3c_freq_dbg("%s: got divs\n", __func__);
+
+	s3c_cpufreq_calc(&cpu_new);
+
+	s3c_freq_dbg("%s: calculated frequencies for new\n", __func__);
+
+	if (cpu_new.freq.hclk != cpu_cur.freq.hclk) {
+		if (s3c_cpufreq_calcio(&cpu_new) < 0) {
+			printk(KERN_ERR "%s: no IO timings\n", __func__);
+			goto err_notpossible;
+		}
+	}
+
+	s3c_cpufreq_show("new", &cpu_new);
+
+	/* setup our cpufreq parameters */
+
+	freqs.old = cpu_cur.freq;
+	freqs.new = cpu_new.freq;
+
+	freqs.freqs.cpu = 0;
+	freqs.freqs.old = cpu_cur.freq.armclk / 1000;
+	freqs.freqs.new = cpu_new.freq.armclk / 1000;
+
+	/* update f/h/p clock settings before we issue the change
+	 * notification, so that drivers do not need to do anything
+	 * special if they want to recalculate on CPUFREQ_PRECHANGE. */
+
+	s3c_cpufreq_updateclk(_clk_mpll, cpu_new.pll.frequency);
+	s3c_cpufreq_updateclk(clk_fclk, cpu_new.freq.fclk);
+	s3c_cpufreq_updateclk(clk_hclk, cpu_new.freq.hclk);
+	s3c_cpufreq_updateclk(clk_pclk, cpu_new.freq.pclk);
+
+	/* start the frequency change */
+
+	if (policy)
+		cpufreq_notify_transition(&freqs.freqs, CPUFREQ_PRECHANGE);
+
+	/* If hclk is staying the same, then we do not need to
+	 * re-write the IO or the refresh timings whilst we are changing
+	 * speed. */
+
+	local_irq_save(flags);
+
+	/* is our memory clock slowing down? */
+	if (cpu_new.freq.hclk < cpu_cur.freq.hclk) {
+		s3c_cpufreq_setrefresh(&cpu_new);
+		s3c_cpufreq_setio(&cpu_new);
+	}
+
+	if (cpu_new.freq.fclk == cpu_cur.freq.fclk) {
+		/* not changing PLL, just set the divisors */
+
+		s3c_cpufreq_setdivs(&cpu_new);
+	} else {
+		if (cpu_new.freq.fclk < cpu_cur.freq.fclk) {
+			/* slow the cpu down, then set divisors */
+
+			s3c_cpufreq_setfvco(&cpu_new);
+			s3c_cpufreq_setdivs(&cpu_new);
+		} else {
+			/* set the divisors, then speed up */
+
+			s3c_cpufreq_setdivs(&cpu_new);
+			s3c_cpufreq_setfvco(&cpu_new);
+		}
+	}
+
+	/* did our memory clock speed up */
+	if (cpu_new.freq.hclk > cpu_cur.freq.hclk) {
+		s3c_cpufreq_setrefresh(&cpu_new);
+		s3c_cpufreq_setio(&cpu_new);
+	}
+
+	/* update our current settings */
+	cpu_cur = cpu_new;
+
+	local_irq_restore(flags);
+
+	/* notify everyone we've done this */
+	if (policy)
+		cpufreq_notify_transition(&freqs.freqs, CPUFREQ_POSTCHANGE);
+
+	s3c_freq_dbg("%s: finished\n", __func__);
+	return 0;
+
+ err_notpossible:
+	printk(KERN_ERR "no compatible settings for %d\n", target_freq);
+	return -EINVAL;
+}
+
+/* s3c_cpufreq_target
+ *
+ * called by the cpufreq core to adjust the frequency that the CPU
+ * is currently running at.
+ */
+
+static int s3c_cpufreq_target(struct cpufreq_policy *policy,
+			      unsigned int target_freq,
+			      unsigned int relation)
+{
+	struct cpufreq_frequency_table *pll;
+	unsigned int index;
+
+	/* avoid repeated calls which cause a needless amout of duplicated
+	 * logging output (and CPU time as the calculation process is
+	 * done) */
+	if (target_freq == last_target)
+		return 0;
+
+	last_target = target_freq;
+
+	s3c_freq_dbg("%s: policy %p, target %u, relation %u\n",
+		     __func__, policy, target_freq, relation);
+
+	if (ftab) {
+		if (cpufreq_frequency_table_target(policy, ftab,
+						   target_freq, relation,
+						   &index)) {
+			s3c_freq_dbg("%s: table failed\n", __func__);
+			return -EINVAL;
+		}
+
+		s3c_freq_dbg("%s: adjust %d to entry %d (%u)\n", __func__,
+			     target_freq, index, ftab[index].frequency);
+		target_freq = ftab[index].frequency;
+	}
+
+	target_freq *= 1000;  /* convert target to Hz */
+
+	/* find the settings for our new frequency */
+
+	if (!pll_reg || cpu_cur.lock_pll) {
+		/* either we've not got any PLL values, or we've locked
+		 * to the current one. */
+		pll = NULL;
+	} else {
+		struct cpufreq_policy tmp_policy;
+		int ret;
+
+		/* we keep the cpu pll table in Hz, to ensure we get an
+		 * accurate value for the PLL output. */
+
+		tmp_policy.min = policy->min * 1000;
+		tmp_policy.max = policy->max * 1000;
+		tmp_policy.cpu = policy->cpu;
+
+		/* cpufreq_frequency_table_target uses a pointer to 'index'
+		 * which is the number of the table entry, not the value of
+		 * the table entry's index field. */
+
+		ret = cpufreq_frequency_table_target(&tmp_policy, pll_reg,
+						     target_freq, relation,
+						     &index);
+
+		if (ret < 0) {
+			printk(KERN_ERR "%s: no PLL available\n", __func__);
+			goto err_notpossible;
+		}
+
+		pll = pll_reg + index;
+
+		s3c_freq_dbg("%s: target %u => %u\n",
+			     __func__, target_freq, pll->frequency);
+
+		target_freq = pll->frequency;
+	}
+
+	return s3c_cpufreq_settarget(policy, target_freq, pll);
+
+ err_notpossible:
+	printk(KERN_ERR "no compatible settings for %d\n", target_freq);
+	return -EINVAL;
+}
+
+static unsigned int s3c_cpufreq_get(unsigned int cpu)
+{
+	return clk_get_rate(clk_arm) / 1000;
+}
+
+struct clk *s3c_cpufreq_clk_get(struct device *dev, const char *name)
+{
+	struct clk *clk;
+
+	clk = clk_get(dev, name);
+	if (IS_ERR(clk))
+		printk(KERN_ERR "cpufreq: failed to get clock '%s'\n", name);
+
+	return clk;
+}
+
+static int s3c_cpufreq_init(struct cpufreq_policy *policy)
+{
+	printk(KERN_INFO "%s: initialising policy %p\n", __func__, policy);
+
+	if (policy->cpu != 0)
+		return -EINVAL;
+
+	policy->cur = s3c_cpufreq_get(0);
+	policy->min = policy->cpuinfo.min_freq = 0;
+	policy->max = policy->cpuinfo.max_freq = cpu_cur.info->max.fclk / 1000;
+	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+
+	/* feed the latency information from the cpu driver */
+	policy->cpuinfo.transition_latency = cpu_cur.info->latency;
+
+	if (ftab)
+		cpufreq_frequency_table_cpuinfo(policy, ftab);
+
+	return 0;
+}
+
+static __init int s3c_cpufreq_initclks(void)
+{
+	_clk_mpll = s3c_cpufreq_clk_get(NULL, "mpll");
+	_clk_xtal = s3c_cpufreq_clk_get(NULL, "xtal");
+	clk_fclk = s3c_cpufreq_clk_get(NULL, "fclk");
+	clk_hclk = s3c_cpufreq_clk_get(NULL, "hclk");
+	clk_pclk = s3c_cpufreq_clk_get(NULL, "pclk");
+	clk_arm = s3c_cpufreq_clk_get(NULL, "armclk");
+
+	if (IS_ERR(clk_fclk) || IS_ERR(clk_hclk) || IS_ERR(clk_pclk) ||
+	    IS_ERR(_clk_mpll) || IS_ERR(clk_arm) || IS_ERR(_clk_xtal)) {
+		printk(KERN_ERR "%s: could not get clock(s)\n", __func__);
+		return -ENOENT;
+	}
+
+	printk(KERN_INFO "%s: clocks f=%lu,h=%lu,p=%lu,a=%lu\n", __func__,
+	       clk_get_rate(clk_fclk) / 1000,
+	       clk_get_rate(clk_hclk) / 1000,
+	       clk_get_rate(clk_pclk) / 1000,
+	       clk_get_rate(clk_arm) / 1000);
+
+	return 0;
+}
+
+static int s3c_cpufreq_verify(struct cpufreq_policy *policy)
+{
+	if (policy->cpu != 0)
+		return -EINVAL;
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static struct cpufreq_frequency_table suspend_pll;
+static unsigned int suspend_freq;
+
+static int s3c_cpufreq_suspend(struct cpufreq_policy *policy, pm_message_t pmsg)
+{
+	suspend_pll.frequency = clk_get_rate(_clk_mpll);
+	suspend_pll.index = __raw_readl(S3C2410_MPLLCON);
+	suspend_freq = s3c_cpufreq_get(0) * 1000;
+
+	return 0;
+}
+
+static int s3c_cpufreq_resume(struct cpufreq_policy *policy)
+{
+	int ret;
+
+	s3c_freq_dbg("%s: resuming with policy %p\n", __func__, policy);
+
+	last_target = ~0;	/* invalidate last_target setting */
+
+	/* first, find out what speed we resumed at. */
+	s3c_cpufreq_resume_clocks();
+
+	/* whilst we will be called later on, we try and re-set the
+	 * cpu frequencies as soon as possible so that we do not end
+	 * up resuming devices and then immediatley having to re-set
+	 * a number of settings once these devices have restarted.
+	 *
+	 * as a note, it is expected devices are not used until they
+	 * have been un-suspended and at that time they should have
+	 * used the updated clock settings.
+	 */
+
+	ret = s3c_cpufreq_settarget(NULL, suspend_freq, &suspend_pll);
+	if (ret) {
+		printk(KERN_ERR "%s: failed to reset pll/freq\n", __func__);
+		return ret;
+	}
+
+	return 0;
+}
+#else
+#define s3c_cpufreq_resume NULL
+#define s3c_cpufreq_suspend NULL
+#endif
+
+static struct cpufreq_driver s3c24xx_driver = {
+	.flags		= CPUFREQ_STICKY,
+	.verify		= s3c_cpufreq_verify,
+	.target		= s3c_cpufreq_target,
+	.get		= s3c_cpufreq_get,
+	.init		= s3c_cpufreq_init,
+	.suspend	= s3c_cpufreq_suspend,
+	.resume		= s3c_cpufreq_resume,
+	.name		= "s3c24xx",
+};
+
+
+int __init s3c_cpufreq_register(struct s3c_cpufreq_info *info)
+{
+	if (!info || !info->name) {
+		printk(KERN_ERR "%s: failed to pass valid information\n",
+		       __func__);
+		return -EINVAL;
+	}
+
+	printk(KERN_INFO "S3C24XX CPU Frequency driver, %s cpu support\n",
+	       info->name);
+
+	/* check our driver info has valid data */
+
+	BUG_ON(info->set_refresh == NULL);
+	BUG_ON(info->set_divs == NULL);
+	BUG_ON(info->calc_divs == NULL);
+
+	/* info->set_fvco is optional, depending on whether there
+	 * is a need to set the clock code. */
+
+	cpu_cur.info = info;
+
+	/* Note, driver registering should probably update locktime */
+
+	return 0;
+}
+
+int __init s3c_cpufreq_setboard(struct s3c_cpufreq_board *board)
+{
+	struct s3c_cpufreq_board *ours;
+
+	if (!board) {
+		printk(KERN_INFO "%s: no board data\n", __func__);
+		return -EINVAL;
+	}
+
+	/* Copy the board information so that each board can make this
+	 * initdata. */
+
+	ours = kzalloc(sizeof(struct s3c_cpufreq_board), GFP_KERNEL);
+	if (ours == NULL) {
+		printk(KERN_ERR "%s: no memory\n", __func__);
+		return -ENOMEM;
+	}
+
+	*ours = *board;
+	cpu_cur.board = ours;
+
+	return 0;
+}
+
+int __init s3c_cpufreq_auto_io(void)
+{
+	int ret;
+
+	if (!cpu_cur.info->get_iotiming) {
+		printk(KERN_ERR "%s: get_iotiming undefined\n", __func__);
+		return -ENOENT;
+	}
+
+	printk(KERN_INFO "%s: working out IO settings\n", __func__);
+
+	ret = (cpu_cur.info->get_iotiming)(&cpu_cur, &s3c24xx_iotiming);
+	if (ret)
+		printk(KERN_ERR "%s: failed to get timings\n", __func__);
+
+	return ret;
+}
+
+/* if one or is zero, then return the other, otherwise return the min */
+#define do_min(_a, _b) ((_a) == 0 ? (_b) : (_b) == 0 ? (_a) : min(_a, _b))
+
+/**
+ * s3c_cpufreq_freq_min - find the minimum settings for the given freq.
+ * @dst: The destination structure
+ * @a: One argument.
+ * @b: The other argument.
+ *
+ * Create a minimum of each frequency entry in the 'struct s3c_freq',
+ * unless the entry is zero when it is ignored and the non-zero argument
+ * used.
+ */
+static void s3c_cpufreq_freq_min(struct s3c_freq *dst,
+				 struct s3c_freq *a, struct s3c_freq *b)
+{
+	dst->fclk = do_min(a->fclk, b->fclk);
+	dst->hclk = do_min(a->hclk, b->hclk);
+	dst->pclk = do_min(a->pclk, b->pclk);
+	dst->armclk = do_min(a->armclk, b->armclk);
+}
+
+static inline u32 calc_locktime(u32 freq, u32 time_us)
+{
+	u32 result;
+
+	result = freq * time_us;
+	result = DIV_ROUND_UP(result, 1000 * 1000);
+
+	return result;
+}
+
+static void s3c_cpufreq_update_loctkime(void)
+{
+	unsigned int bits = cpu_cur.info->locktime_bits;
+	u32 rate = (u32)clk_get_rate(_clk_xtal);
+	u32 val;
+
+	if (bits == 0) {
+		WARN_ON(1);
+		return;
+	}
+
+	val = calc_locktime(rate, cpu_cur.info->locktime_u) << bits;
+	val |= calc_locktime(rate, cpu_cur.info->locktime_m);
+
+	printk(KERN_INFO "%s: new locktime is 0x%08x\n", __func__, val);
+	__raw_writel(val, S3C2410_LOCKTIME);
+}
+
+static int s3c_cpufreq_build_freq(void)
+{
+	int size, ret;
+
+	if (!cpu_cur.info->calc_freqtable)
+		return -EINVAL;
+
+	kfree(ftab);
+	ftab = NULL;
+
+	size = cpu_cur.info->calc_freqtable(&cpu_cur, NULL, 0);
+	size++;
+
+	ftab = kmalloc(sizeof(struct cpufreq_frequency_table) * size, GFP_KERNEL);
+	if (!ftab) {
+		printk(KERN_ERR "%s: no memory for tables\n", __func__);
+		return -ENOMEM;
+	}
+
+	ftab_size = size;
+
+	ret = cpu_cur.info->calc_freqtable(&cpu_cur, ftab, size);
+	s3c_cpufreq_addfreq(ftab, ret, size, CPUFREQ_TABLE_END);
+
+	return 0;
+}
+
+static int __init s3c_cpufreq_initcall(void)
+{
+	int ret = 0;
+
+	if (cpu_cur.info && cpu_cur.board) {
+		ret = s3c_cpufreq_initclks();
+		if (ret)
+			goto out;
+
+		/* get current settings */
+		s3c_cpufreq_getcur(&cpu_cur);
+		s3c_cpufreq_show("cur", &cpu_cur);
+
+		if (cpu_cur.board->auto_io) {
+			ret = s3c_cpufreq_auto_io();
+			if (ret) {
+				printk(KERN_ERR "%s: failed to get io timing\n",
+				       __func__);
+				goto out;
+			}
+		}
+
+		if (cpu_cur.board->need_io && !cpu_cur.info->set_iotiming) {
+			printk(KERN_ERR "%s: no IO support registered\n",
+			       __func__);
+			ret = -EINVAL;
+			goto out;
+		}
+
+		if (!cpu_cur.info->need_pll)
+			cpu_cur.lock_pll = 1;
+
+		s3c_cpufreq_update_loctkime();
+
+		s3c_cpufreq_freq_min(&cpu_cur.max, &cpu_cur.board->max,
+				     &cpu_cur.info->max);
+
+		if (cpu_cur.info->calc_freqtable)
+			s3c_cpufreq_build_freq();
+
+		ret = cpufreq_register_driver(&s3c24xx_driver);
+	}
+
+ out:
+	return ret;
+}
+
+late_initcall(s3c_cpufreq_initcall);
+
+/**
+ * s3c_plltab_register - register CPU PLL table.
+ * @plls: The list of PLL entries.
+ * @plls_no: The size of the PLL entries @plls.
+ *
+ * Register the given set of PLLs with the system.
+ */
+int __init s3c_plltab_register(struct cpufreq_frequency_table *plls,
+			       unsigned int plls_no)
+{
+	struct cpufreq_frequency_table *vals;
+	unsigned int size;
+
+	size = sizeof(struct cpufreq_frequency_table) * (plls_no + 1);
+
+	vals = kmalloc(size, GFP_KERNEL);
+	if (vals) {
+		memcpy(vals, plls, size);
+		pll_reg = vals;
+
+		/* write a terminating entry, we don't store it in the
+		 * table that is stored in the kernel */
+		vals += plls_no;
+		vals->frequency = CPUFREQ_TABLE_END;
+
+		printk(KERN_INFO "cpufreq: %d PLL entries\n", plls_no);
+	} else
+		printk(KERN_ERR "cpufreq: no memory for PLL tables\n");
+
+	return vals ? 0 : -ENOMEM;
+}
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index 1932b7e..5447e60 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -81,7 +81,7 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.map_io		= s3c2410_map_io,
 		.init_clocks	= s3c2410_init_clocks,
 		.init_uarts	= s3c2410_init_uarts,
-		.init		= s3c2410_init,
+		.init		= s3c2410a_init,
 		.name		= name_s3c2410a
 	},
 	{
diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
new file mode 100644
index 0000000..efeb025
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
@@ -0,0 +1,282 @@
+/* arch/arm/plat-s3c/include/plat/cpu-freq.h
+ *
+ * Copyright (c) 2006,2007,2009 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C CPU frequency scaling support - core support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <plat/cpu-freq.h>
+
+struct seq_file;
+
+#define MAX_BANKS (8)
+#define S3C2412_MAX_IO	(8)
+
+/**
+ * struct s3c2410_iobank_timing - IO bank timings for S3C2410 style timings
+ * @bankcon: The cached version of settings in this structure.
+ * @tacp:
+ * @tacs: Time from address valid to nCS asserted.
+ * @tcos: Time from nCS asserted to nOE or nWE asserted.
+ * @tacc: Time that nOE or nWE is asserted.
+ * @tcoh: Time nCS is held after nOE or nWE are released.
+ * @tcah: Time address is held for after
+ * @nwait_en: Whether nWAIT is enabled for this bank.
+ *
+ * This structure represents the IO timings for a S3C2410 style IO bank
+ * used by the CPU frequency support if it needs to change the settings
+ * of the IO.
+ */
+struct s3c2410_iobank_timing {
+	unsigned long	bankcon;
+	unsigned int	tacp;
+	unsigned int	tacs;
+	unsigned int	tcos;
+	unsigned int	tacc;
+	unsigned int	tcoh;		/* nCS hold afrer nOE/nWE */
+	unsigned int	tcah;		/* Address hold after nCS */
+	unsigned char	nwait_en;	/* nWait enabled for bank. */
+};
+
+/**
+ * struct s3c2412_iobank_timing - io timings for PL092 (S3C2412) style IO
+ * @idcy: The idle cycle time between transactions.
+ * @wstrd: nCS release to end of read cycle.
+ * @wstwr: nCS release to end of write cycle.
+ * @wstoen: nCS assertion to nOE assertion time.
+ * @wstwen: nCS assertion to nWE assertion time.
+ * @wstbrd: Burst ready delay.
+ * @smbidcyr: Register cache for smbidcyr value.
+ * @smbwstrd: Register cache for smbwstrd value.
+ * @smbwstwr: Register cache for smbwstwr value.
+ * @smbwstoen: Register cache for smbwstoen value.
+ * @smbwstwen: Register cache for smbwstwen value.
+ * @smbwstbrd: Register cache for smbwstbrd value.
+ *
+ * Timing information for a IO bank on an S3C2412 or similar system which
+ * uses a PL093 block.
+ */
+struct s3c2412_iobank_timing {
+	unsigned int	idcy;
+	unsigned int	wstrd;
+	unsigned int	wstwr;
+	unsigned int	wstoen;
+	unsigned int	wstwen;
+	unsigned int	wstbrd;
+
+	/* register cache */
+	unsigned char	smbidcyr;
+	unsigned char	smbwstrd;
+	unsigned char	smbwstwr;
+	unsigned char	smbwstoen;
+	unsigned char	smbwstwen;
+	unsigned char	smbwstbrd;
+};
+
+union s3c_iobank {
+	struct s3c2410_iobank_timing	*io_2410;
+	struct s3c2412_iobank_timing	*io_2412;
+};
+
+/**
+ * struct s3c_iotimings - Chip IO timings holder
+ * @bank: The timings for each IO bank.
+ */
+struct s3c_iotimings {
+	union s3c_iobank	bank[MAX_BANKS];
+};
+
+/**
+ * struct s3c_plltab - PLL table information.
+ * @vals: List of PLL values.
+ * @size: Size of the PLL table @vals.
+ */
+struct s3c_plltab {
+	struct s3c_pllval	*vals;
+	int			 size;
+};
+
+/**
+ * struct s3c_cpufreq_config - current cpu frequency configuration
+ * @freq: The current settings for the core clocks.
+ * @max: Maxium settings, derived from core, board and user settings.
+ * @pll: The PLL table entry for the current PLL settings.
+ * @divs: The divisor settings for the core clocks.
+ * @info: The current core driver information.
+ * @board: The information for the board we are running on.
+ * @lock_pll: Set if the PLL settings cannot be changed.
+ *
+ * This is for the core drivers that need to know information about
+ * the current settings and values. It should not be needed by any
+ * device drivers.
+*/
+struct s3c_cpufreq_config {
+	struct s3c_freq		freq;
+	struct s3c_freq		max;
+	struct cpufreq_frequency_table pll;
+	struct s3c_clkdivs	divs;
+	struct s3c_cpufreq_info *info;	/* for core, not drivers */
+	struct s3c_cpufreq_board *board;
+
+	unsigned int	lock_pll:1;
+};
+
+/**
+ * struct s3c_cpufreq_info - Information for the CPU frequency driver.
+ * @name: The name of this implementation.
+ * @max: The maximum frequencies for the system.
+ * @latency: Transition latency to give to cpufreq.
+ * @locktime_m: The lock-time in uS for the MPLL.
+ * @locktime_u: The lock-time in uS for the UPLL.
+ * @locttime_bits: The number of bits each LOCKTIME field.
+ * @need_pll: Set if this driver needs to change the PLL values to acheive
+ *	any frequency changes. This is really only need by devices like the
+ *	S3C2410 where there is no or limited divider between the PLL and the
+ *	ARMCLK.
+ * @resume_clocks: Update the clocks on resume.
+ * @get_iotiming: Get the current IO timing data, mainly for use at start.
+ * @set_iotiming: Update the IO timings from the cached copies calculated
+ *	from the @calc_iotiming entry when changing the frequency.
+ * @calc_iotiming: Calculate and update the cached copies of the IO timings
+ *	from the newly calculated frequencies.
+ * @calc_freqtable: Calculate (fill in) the given frequency table from the
+ *	current frequency configuration. If the table passed in is NULL,
+ *	then the return is the number of elements to be filled for allocation
+ *	of the table.
+ * @set_refresh: Set the memory refresh configuration.
+ * @set_fvco: Set the PLL frequencies.
+ * @set_divs: Update the clock divisors.
+ * @calc_divs: Calculate the clock divisors.
+ */
+struct s3c_cpufreq_info {
+	const char		*name;
+	struct s3c_freq		max;
+
+	unsigned int		latency;
+
+	unsigned int		locktime_m;
+	unsigned int		locktime_u;
+	unsigned char		locktime_bits;
+
+	unsigned int		need_pll:1;
+
+	/* driver routines */
+
+	void		(*resume_clocks)(void);
+
+	int		(*get_iotiming)(struct s3c_cpufreq_config *cfg,
+					struct s3c_iotimings *timings);
+
+	void		(*set_iotiming)(struct s3c_cpufreq_config *cfg,
+					struct s3c_iotimings *timings);
+
+	int		(*calc_iotiming)(struct s3c_cpufreq_config *cfg,
+					 struct s3c_iotimings *timings);
+
+	int		(*calc_freqtable)(struct s3c_cpufreq_config *cfg,
+					  struct cpufreq_frequency_table *t,
+					  size_t table_size);
+
+	void		(*debug_io_show)(struct seq_file *seq,
+					 struct s3c_cpufreq_config *cfg,
+					 union s3c_iobank *iob);
+
+	void		(*set_refresh)(struct s3c_cpufreq_config *cfg);
+	void		(*set_fvco)(struct s3c_cpufreq_config *cfg);
+	void		(*set_divs)(struct s3c_cpufreq_config *cfg);
+	int		(*calc_divs)(struct s3c_cpufreq_config *cfg);
+};
+
+extern int s3c_cpufreq_register(struct s3c_cpufreq_info *info);
+
+extern int s3c_plltab_register(struct cpufreq_frequency_table *plls, unsigned int plls_no);
+
+/* exports and utilities for debugfs */
+extern struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void);
+extern struct s3c_iotimings *s3c_cpufreq_getiotimings(void);
+
+extern void s3c2410_iotiming_debugfs(struct seq_file *seq,
+				     struct s3c_cpufreq_config *cfg,
+				     union s3c_iobank *iob);
+
+extern void s3c2412_iotiming_debugfs(struct seq_file *seq,
+				     struct s3c_cpufreq_config *cfg,
+				     union s3c_iobank *iob);
+
+#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS
+#define s3c_cpufreq_debugfs_call(x) x
+#else
+#define s3c_cpufreq_debugfs_call(x) NULL
+#endif
+
+/* Useful utility functions. */
+
+extern struct clk *s3c_cpufreq_clk_get(struct device *, const char *);
+
+/* S3C2410 and compatible exported functions */
+
+extern void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg);
+
+extern int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg,
+				 struct s3c_iotimings *iot);
+
+extern int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg,
+				struct s3c_iotimings *timings);
+
+extern void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
+				 struct s3c_iotimings *iot);
+
+extern void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg);
+
+/* S3C2412 compatible routines */
+
+extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
+				struct s3c_iotimings *timings);
+
+extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
+				struct s3c_iotimings *timings);
+
+extern int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg,
+				 struct s3c_iotimings *iot);
+
+extern void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
+				 struct s3c_iotimings *iot);
+
+#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUG
+#define s3c_freq_dbg(x...) printk(KERN_INFO x)
+#else
+#define s3c_freq_dbg(x...) do { if (0) printk(x); } while (0)
+#endif /* CONFIG_CPU_FREQ_S3C24XX_DEBUG */
+
+#ifdef CONFIG_CPU_FREQ_S3C24XX_IODEBUG
+#define s3c_freq_iodbg(x...) printk(KERN_INFO x)
+#else
+#define s3c_freq_iodbg(x...) do { if (0) printk(x); } while (0)
+#endif /* CONFIG_CPU_FREQ_S3C24XX_IODEBUG */
+
+static inline int s3c_cpufreq_addfreq(struct cpufreq_frequency_table *table,
+				      int index, size_t table_size,
+				      unsigned int freq)
+{
+	if (index < 0)
+		return index;
+
+	if (table) {
+		if (index >= table_size)
+			return -ENOMEM;
+
+		s3c_freq_dbg("%s: { %d = %u kHz }\n",
+			     __func__, index, freq);
+
+		table[index].index = index;
+		table[index].frequency = freq;
+	}
+
+	return index + 1;
+}
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h b/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
index a9ac9e2..b6deeef 100644
--- a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
@@ -14,6 +14,7 @@
 #ifdef CONFIG_CPU_S3C2410
 
 extern  int s3c2410_init(void);
+extern  int s3c2410a_init(void);
 
 extern void s3c2410_map_io(void);
 
diff --git a/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c b/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c
new file mode 100644
index 0000000..43ea801
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c
@@ -0,0 +1,64 @@
+/* linux/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c
+ *
+ * Copyright (c) 2009 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX CPU Frequency scaling - utils for S3C2410/S3C2440/S3C2442
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/cpufreq.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-clock.h>
+
+#include <plat/cpu-freq-core.h>
+
+/**
+ * s3c2410_cpufreq_setrefresh - set SDRAM refresh value
+ * @cfg: The frequency configuration
+ *
+ * Set the SDRAM refresh value appropriately for the configured
+ * frequency.
+ */
+void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+	struct s3c_cpufreq_board *board = cfg->board;
+	unsigned long refresh;
+	unsigned long refval;
+
+	/* Reduce both the refresh time (in ns) and the frequency (in MHz)
+	 * down to ensure that we do not overflow 32 bit numbers.
+	 *
+	 * This should work for HCLK up to 133MHz and refresh period up
+	 * to 30usec.
+	 */
+
+	refresh = (cfg->freq.hclk / 100) * (board->refresh / 10);
+	refresh = DIV_ROUND_UP(refresh, (1000 * 1000)); /* apply scale  */
+	refresh = (1 << 11) + 1 - refresh;
+
+	s3c_freq_dbg("%s: refresh value %lu\n", __func__, refresh);
+
+	refval = __raw_readl(S3C2410_REFRESH);
+	refval &= ~((1 << 12) - 1);
+	refval |= refresh;
+	__raw_writel(refval, S3C2410_REFRESH);
+}
+
+/**
+ * s3c2410_set_fvco - set the PLL value
+ * @cfg: The frequency configuration
+ */
+void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg)
+{
+	__raw_writel(cfg->pll.index, S3C2410_MPLLCON);
+}
diff --git a/arch/arm/plat-s3c24xx/s3c2410-iotiming.c b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
new file mode 100644
index 0000000..d0a3a14
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
@@ -0,0 +1,477 @@
+/* linux/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
+ *
+ * Copyright (c) 2006,2008,2009 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX CPU Frequency scaling - IO timing for S3C2410/S3C2440/S3C2442
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/cpufreq.h>
+#include <linux/seq_file.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-clock.h>
+
+#include <plat/cpu-freq-core.h>
+
+#define print_ns(x) ((x) / 10), ((x) % 10)
+
+/**
+ * s3c2410_print_timing - print bank timing data for debug purposes
+ * @pfx: The prefix to put on the output
+ * @timings: The timing inforamtion to print.
+*/
+static void s3c2410_print_timing(const char *pfx,
+				 struct s3c_iotimings *timings)
+{
+	struct s3c2410_iobank_timing *bt;
+	int bank;
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		bt = timings->bank[bank].io_2410;
+		if (!bt)
+			continue;
+
+		printk(KERN_DEBUG "%s %d: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, "
+		       "Tcoh=%d.%d, Tcah=%d.%d\n", pfx, bank,
+		       print_ns(bt->tacs),
+		       print_ns(bt->tcos),
+		       print_ns(bt->tacc),
+		       print_ns(bt->tcoh),
+		       print_ns(bt->tcah));
+	}
+}
+
+/**
+ * bank_reg - convert bank number to pointer to the control register.
+ * @bank: The IO bank number.
+ */
+static inline void __iomem *bank_reg(unsigned int bank)
+{
+	return S3C2410_BANKCON0 + (bank << 2);
+}
+
+/**
+ * bank_is_io - test whether bank is used for IO
+ * @bankcon: The bank control register.
+ *
+ * This is a simplistic test to see if any BANKCON[x] is not an IO
+ * bank. It currently does not take into account whether BWSCON has
+ * an illegal width-setting in it, or if the pin connected to nCS[x]
+ * is actually being handled as a chip-select.
+ */
+static inline int bank_is_io(unsigned long bankcon)
+{
+	return !(bankcon & S3C2410_BANKCON_SDRAM);
+}
+
+/**
+ * to_div - convert cycle time to divisor
+ * @cyc: The cycle time, in 10ths of nanoseconds.
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ *
+ * Convert the given cycle time into the divisor to use to obtain it from
+ * HCLK.
+*/
+static inline unsigned int to_div(unsigned int cyc, unsigned int hclk_tns)
+{
+	if (cyc == 0)
+		return 0;
+
+	return DIV_ROUND_UP(cyc, hclk_tns);
+}
+
+/**
+ * calc_0124 - calculate divisor control for divisors that do /0, /1. /2 and /4
+ * @cyc: The cycle time, in 10ths of nanoseconds.
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ * @v: Pointer to register to alter.
+ * @shift: The shift to get to the control bits.
+ *
+ * Calculate the divisor, and turn it into the correct control bits to
+ * set in the result, @v.
+ */
+static unsigned int calc_0124(unsigned int cyc, unsigned long hclk_tns,
+			      unsigned long *v, int shift)
+{
+	unsigned int div = to_div(cyc, hclk_tns);
+	unsigned long val;
+
+	s3c_freq_iodbg("%s: cyc=%d, hclk=%lu, shift=%d => div %d\n",
+		       __func__, cyc, hclk_tns, shift, div);
+
+	switch (div) {
+	case 0:
+		val = 0;
+		break;
+	case 1:
+		val = 1;
+		break;
+	case 2:
+		val = 2;
+		break;
+	case 3:
+	case 4:
+		val = 3;
+		break;
+	default:
+		return -1;
+	}
+
+	*v |= val << shift;
+	return 0;
+}
+
+int calc_tacp(unsigned int cyc, unsigned long hclk, unsigned long *v)
+{
+	/* Currently no support for Tacp calculations. */
+	return 0;
+}
+
+/**
+ * calc_tacc - calculate divisor control for tacc.
+ * @cyc: The cycle time, in 10ths of nanoseconds.
+ * @nwait_en: IS nWAIT enabled for this bank.
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ * @v: Pointer to register to alter.
+ *
+ * Calculate the divisor control for tACC, taking into account whether
+ * the bank has nWAIT enabled. The result is used to modify the value
+ * pointed to by @v.
+*/
+static int calc_tacc(unsigned int cyc, int nwait_en,
+		     unsigned long hclk_tns, unsigned long *v)
+{
+	unsigned int div = to_div(cyc, hclk_tns);
+	unsigned long val;
+
+	s3c_freq_iodbg("%s: cyc=%u, nwait=%d, hclk=%lu => div=%u\n",
+		       __func__, cyc, nwait_en, hclk_tns, div);
+
+	/* if nWait enabled on an bank, Tacc must be at-least 4 cycles. */
+	if (nwait_en && div < 4)
+		div = 4;
+
+	switch (div) {
+	case 0:
+		val = 0;
+		break;
+
+	case 1:
+	case 2:
+	case 3:
+	case 4:
+		val = div - 1;
+		break;
+
+	case 5:
+	case 6:
+		val = 4;
+		break;
+
+	case 7:
+	case 8:
+		val = 5;
+		break;
+
+	case 9:
+	case 10:
+		val = 6;
+		break;
+
+	case 11:
+	case 12:
+	case 13:
+	case 14:
+		val = 7;
+		break;
+
+	default:
+		return -1;
+	}
+
+	*v |= val << 8;
+	return 0;
+}
+
+/**
+ * s3c2410_calc_bank - calculate bank timing infromation
+ * @cfg: The configuration we need to calculate for.
+ * @bt: The bank timing information.
+ *
+ * Given the cycle timine for a bank @bt, calculate the new BANKCON
+ * setting for the @cfg timing. This updates the timing information
+ * ready for the cpu frequency change.
+ */
+static int s3c2410_calc_bank(struct s3c_cpufreq_config *cfg,
+			     struct s3c2410_iobank_timing *bt)
+{
+	unsigned long hclk = cfg->freq.hclk_tns;
+	unsigned long res;
+	int ret;
+
+	res  = bt->bankcon;
+	res &= (S3C2410_BANKCON_SDRAM | S3C2410_BANKCON_PMC16);
+
+	/* tacp: 2,3,4,5 */
+	/* tcah: 0,1,2,4 */
+	/* tcoh: 0,1,2,4 */
+	/* tacc: 1,2,3,4,6,7,10,14 (>4 for nwait) */
+	/* tcos: 0,1,2,4 */
+	/* tacs: 0,1,2,4 */
+
+	ret  = calc_0124(bt->tacs, hclk, &res, S3C2410_BANKCON_Tacs_SHIFT);
+	ret |= calc_0124(bt->tcos, hclk, &res, S3C2410_BANKCON_Tcos_SHIFT);
+	ret |= calc_0124(bt->tcah, hclk, &res, S3C2410_BANKCON_Tcah_SHIFT);
+	ret |= calc_0124(bt->tcoh, hclk, &res, S3C2410_BANKCON_Tcoh_SHIFT);
+
+	if (ret)
+		return -EINVAL;
+
+	ret |= calc_tacp(bt->tacp, hclk, &res);
+	ret |= calc_tacc(bt->tacc, bt->nwait_en, hclk, &res);
+
+	if (ret)
+		return -EINVAL;
+
+	bt->bankcon = res;
+	return 0;
+}
+
+static unsigned int tacc_tab[] = {
+	[0]	= 1,
+	[1]	= 2,
+	[2]	= 3,
+	[3]	= 4,
+	[4]	= 6,
+	[5]	= 9,
+	[6]	= 10,
+	[7]	= 14,
+};
+
+/**
+ * get_tacc - turn tACC value into cycle time
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ * @val: The bank timing register value, shifed down.
+ */
+static unsigned int get_tacc(unsigned long hclk_tns,
+			     unsigned long val)
+{
+	val &= 7;
+	return hclk_tns * tacc_tab[val];
+}
+
+/**
+ * get_0124 - turn 0/1/2/4 divider into cycle time
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ * @val: The bank timing register value, shifed down.
+ */
+static unsigned int get_0124(unsigned long hclk_tns,
+			     unsigned long val)
+{
+	val &= 3;
+	return hclk_tns * ((val == 3) ? 4 : val);
+}
+
+/**
+ * s3c2410_iotiming_getbank - turn BANKCON into cycle time information
+ * @cfg: The frequency configuration
+ * @bt: The bank timing to fill in (uses cached BANKCON)
+ *
+ * Given the BANKCON setting in @bt and the current frequency settings
+ * in @cfg, update the cycle timing information.
+ */
+void s3c2410_iotiming_getbank(struct s3c_cpufreq_config *cfg,
+			      struct s3c2410_iobank_timing *bt)
+{
+	unsigned long bankcon = bt->bankcon;
+	unsigned long hclk = cfg->freq.hclk_tns;
+
+	bt->tcah = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcah_SHIFT);
+	bt->tcoh = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcoh_SHIFT);
+	bt->tcos = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcos_SHIFT);
+	bt->tacs = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tacs_SHIFT);
+	bt->tacc = get_tacc(hclk, bankcon >> S3C2410_BANKCON_Tacc_SHIFT);
+}
+
+/**
+ * s3c2410_iotiming_debugfs - debugfs show io bank timing information
+ * @seq: The seq_file to write output to using seq_printf().
+ * @cfg: The current configuration.
+ * @iob: The IO bank information to decode.
+ */
+void s3c2410_iotiming_debugfs(struct seq_file *seq,
+			      struct s3c_cpufreq_config *cfg,
+			      union s3c_iobank *iob)
+{
+	struct s3c2410_iobank_timing *bt = iob->io_2410;
+	unsigned long bankcon = bt->bankcon;
+	unsigned long hclk = cfg->freq.hclk_tns;
+	unsigned int tacs;
+	unsigned int tcos;
+	unsigned int tacc;
+	unsigned int tcoh;
+	unsigned int tcah;
+
+	seq_printf(seq, "BANKCON=0x%08lx\n", bankcon);
+
+	tcah = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcah_SHIFT);
+	tcoh = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcoh_SHIFT);
+	tcos = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcos_SHIFT);
+	tacs = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tacs_SHIFT);
+	tacc = get_tacc(hclk, bankcon >> S3C2410_BANKCON_Tacc_SHIFT);
+
+	seq_printf(seq,
+		   "\tRead: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, Tcoh=%d.%d, Tcah=%d.%d\n",
+		   print_ns(bt->tacs),
+		   print_ns(bt->tcos),
+		   print_ns(bt->tacc),
+		   print_ns(bt->tcoh),
+		   print_ns(bt->tcah));
+
+	seq_printf(seq,
+		   "\t Set: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, Tcoh=%d.%d, Tcah=%d.%d\n",
+		   print_ns(tacs),
+		   print_ns(tcos),
+		   print_ns(tacc),
+		   print_ns(tcoh),
+		   print_ns(tcah));
+}
+
+/**
+ * s3c2410_iotiming_calc - Calculate bank timing for frequency change.
+ * @cfg: The frequency configuration
+ * @iot: The IO timing information to fill out.
+ *
+ * Calculate the new values for the banks in @iot based on the new
+ * frequency information in @cfg. This is then used by s3c2410_iotiming_set()
+ * to update the timing when necessary.
+ */
+int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg,
+			  struct s3c_iotimings *iot)
+{
+	struct s3c2410_iobank_timing *bt;
+	unsigned long bankcon;
+	int bank;
+	int ret;
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		bankcon = __raw_readl(bank_reg(bank));
+		bt = iot->bank[bank].io_2410;
+
+		if (!bt)
+			continue;
+
+		bt->bankcon = bankcon;
+
+		ret = s3c2410_calc_bank(cfg, bt);
+		if (ret) {
+			printk(KERN_ERR "%s: cannot calculate bank %d io\n",
+			       __func__, bank);
+			goto err;
+		}
+
+		s3c_freq_iodbg("%s: bank %d: con=%08lx\n",
+			       __func__, bank, bt->bankcon);
+	}
+
+	return 0;
+ err:
+	return ret;
+}
+
+/**
+ * s3c2410_iotiming_set - set the IO timings from the given setup.
+ * @cfg: The frequency configuration
+ * @iot: The IO timing information to use.
+ *
+ * Set all the currently used IO bank timing information generated
+ * by s3c2410_iotiming_calc() once the core has validated that all
+ * the new values are within permitted bounds.
+ */
+void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
+			  struct s3c_iotimings *iot)
+{
+	struct s3c2410_iobank_timing *bt;
+	int bank;
+
+	/* set the io timings from the specifier */
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		bt = iot->bank[bank].io_2410;
+		if (!bt)
+			continue;
+
+		__raw_writel(bt->bankcon, bank_reg(bank));
+	}
+}
+
+/**
+ * s3c2410_iotiming_get - Get the timing information from current registers.
+ * @cfg: The frequency configuration
+ * @timings: The IO timing information to fill out.
+ *
+ * Calculate the @timings timing information from the current frequency
+ * information in @cfg, and the new frequency configur
+ * through all the IO banks, reading the state and then updating @iot
+ * as necessary.
+ *
+ * This is used at the moment on initialisation to get the current
+ * configuration so that boards do not have to carry their own setup
+ * if the timings are correct on initialisation.
+ */
+
+int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg,
+			 struct s3c_iotimings *timings)
+{
+	struct s3c2410_iobank_timing *bt;
+	unsigned long bankcon;
+	unsigned long bwscon;
+	int bank;
+
+	bwscon = __raw_readl(S3C2410_BWSCON);
+
+	/* look through all banks to see what is currently set. */
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		bankcon = __raw_readl(bank_reg(bank));
+
+		if (!bank_is_io(bankcon))
+			continue;
+
+		s3c_freq_iodbg("%s: bank %d: con %08lx\n",
+			       __func__, bank, bankcon);
+
+		bt = kzalloc(sizeof(struct s3c2410_iobank_timing), GFP_KERNEL);
+		if (!bt) {
+			printk(KERN_ERR "%s: no memory for bank\n", __func__);
+			return -ENOMEM;
+		}
+
+		/* find out in nWait is enabled for bank. */
+
+		if (bank != 0) {
+			unsigned long tmp  = S3C2410_BWSCON_GET(bwscon, bank);
+			if (tmp & S3C2410_BWSCON_WS)
+				bt->nwait_en = 1;
+		}
+
+		timings->bank[bank].io_2410 = bt;
+		bt->bankcon = bankcon;
+
+		s3c2410_iotiming_getbank(cfg, bt);
+	}
+
+	s3c2410_print_timing("get", timings);
+	return 0;
+}
diff --git a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
new file mode 100644
index 0000000..fd45e47f
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
@@ -0,0 +1,285 @@
+/* linux/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
+ *
+ * Copyright (c) 2006,2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2412/S3C2443 (PL093 based) IO timing support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/seq_file.h>
+#include <linux/sysdev.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <linux/amba/pl093.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-s3c2412-mem.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+#include <plat/clock.h>
+
+#define print_ns(x) ((x) / 10), ((x) % 10)
+
+/**
+ * s3c2412_print_timing - print timing infromation via printk.
+ * @pfx: The prefix to print each line with.
+ * @iot: The IO timing information
+ */
+static void s3c2412_print_timing(const char *pfx, struct s3c_iotimings *iot)
+{
+	struct s3c2412_iobank_timing *bt;
+	unsigned int bank;
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		bt = iot->bank[bank].io_2412;
+		if (!bt)
+			continue;
+
+		printk(KERN_DEBUG "%s: %d: idcy=%d.%d wstrd=%d.%d wstwr=%d,%d"
+		       "wstoen=%d.%d wstwen=%d.%d wstbrd=%d.%d\n", pfx, bank,
+		       print_ns(bt->idcy),
+		       print_ns(bt->wstrd),
+		       print_ns(bt->wstwr),
+		       print_ns(bt->wstoen),
+		       print_ns(bt->wstwen),
+		       print_ns(bt->wstbrd));
+	}
+}
+
+/**
+ * to_div - turn a cycle length into a divisor setting.
+ * @cyc_tns: The cycle time in 10ths of nanoseconds.
+ * @clk_tns: The clock period in 10ths of nanoseconds.
+ */
+static inline unsigned int to_div(unsigned int cyc_tns, unsigned int clk_tns)
+{
+	return cyc_tns ? DIV_ROUND_UP(cyc_tns, clk_tns) : 0;
+}
+
+/**
+ * calc_timing - calculate timing divisor value and check in range.
+ * @hwtm: The hardware timing in 10ths of nanoseconds.
+ * @clk_tns: The clock period in 10ths of nanoseconds.
+ * @err: Pointer to err variable to update in event of failure.
+ */
+static unsigned int calc_timing(unsigned int hwtm, unsigned int clk_tns,
+				unsigned int *err)
+{
+	unsigned int ret = to_div(hwtm, clk_tns);
+
+	if (ret > 0xf)
+		*err = -EINVAL;
+
+	return ret;
+}
+
+/**
+ * s3c2412_calc_bank - calculate the bank divisor settings.
+ * @cfg: The current frequency configuration.
+ * @bt: The bank timing.
+ */
+static int s3c2412_calc_bank(struct s3c_cpufreq_config *cfg,
+			     struct s3c2412_iobank_timing *bt)
+{
+	unsigned int hclk = cfg->freq.hclk_tns;
+	int err = 0;
+
+	bt->smbidcyr = calc_timing(bt->idcy, hclk, &err);
+	bt->smbwstrd = calc_timing(bt->wstrd, hclk, &err);
+	bt->smbwstwr = calc_timing(bt->wstwr, hclk, &err);
+	bt->smbwstoen = calc_timing(bt->wstoen, hclk, &err);
+	bt->smbwstwen = calc_timing(bt->wstwen, hclk, &err);
+	bt->smbwstbrd = calc_timing(bt->wstbrd, hclk, &err);
+
+	return err;
+}
+
+/**
+ * s3c2412_iotiming_debugfs - debugfs show io bank timing information
+ * @seq: The seq_file to write output to using seq_printf().
+ * @cfg: The current configuration.
+ * @iob: The IO bank information to decode.
+*/
+void s3c2412_iotiming_debugfs(struct seq_file *seq,
+			      struct s3c_cpufreq_config *cfg,
+			      union s3c_iobank *iob)
+{
+	struct s3c2412_iobank_timing *bt = iob->io_2412;
+
+	seq_printf(seq,
+		   "\tRead: idcy=%d.%d wstrd=%d.%d wstwr=%d,%d"
+		   "wstoen=%d.%d wstwen=%d.%d wstbrd=%d.%d\n",
+		   print_ns(bt->idcy),
+		   print_ns(bt->wstrd),
+		   print_ns(bt->wstwr),
+		   print_ns(bt->wstoen),
+		   print_ns(bt->wstwen),
+		   print_ns(bt->wstbrd));
+}
+
+/**
+ * s3c2412_iotiming_calc - calculate all the bank divisor settings.
+ * @cfg: The current frequency configuration.
+ * @iot: The bank timing information.
+ *
+ * Calculate the timing information for all the banks that are
+ * configured as IO, using s3c2412_calc_bank().
+ */
+int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg,
+			  struct s3c_iotimings *iot)
+{
+	struct s3c2412_iobank_timing *bt;
+	int bank;
+	int ret;
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		bt = iot->bank[bank].io_2412;
+		if (!bt)
+			continue;
+
+		ret = s3c2412_calc_bank(cfg, bt);
+		if (ret) {
+			printk(KERN_ERR "%s: cannot calculate bank %d io\n",
+			       __func__, bank);
+			goto err;
+		}
+	}
+
+	return 0;
+ err:
+	return ret;
+}
+
+/**
+ * s3c2412_iotiming_set - set the timing information
+ * @cfg: The current frequency configuration.
+ * @iot: The bank timing information.
+ *
+ * Set the IO bank information from the details calculated earlier from
+ * calling s3c2412_iotiming_calc().
+ */
+void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
+			  struct s3c_iotimings *iot)
+{
+	struct s3c2412_iobank_timing *bt;
+	void __iomem *regs;
+	int bank;
+
+	/* set the io timings from the specifier */
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		bt = iot->bank[bank].io_2412;
+		if (!bt)
+			continue;
+
+		regs = S3C2412_SSMC_BANK(bank);
+
+		__raw_writel(bt->smbidcyr, regs + SMBIDCYR);
+		__raw_writel(bt->smbwstrd, regs + SMBWSTRDR);
+		__raw_writel(bt->smbwstwr, regs + SMBWSTWRR);
+		__raw_writel(bt->smbwstoen, regs + SMBWSTOENR);
+		__raw_writel(bt->smbwstwen, regs + SMBWSTWENR);
+		__raw_writel(bt->smbwstbrd, regs + SMBWSTBRDR);
+	}
+}
+
+static inline unsigned int s3c2412_decode_timing(unsigned int clock, u32 reg)
+{
+	return (reg & 0xf) * clock;
+}
+
+static void s3c2412_iotiming_getbank(struct s3c_cpufreq_config *cfg,
+				     struct s3c2412_iobank_timing *bt,
+				     unsigned int bank)
+{
+	unsigned long clk = cfg->freq.hclk_tns;  /* ssmc clock??? */
+	void __iomem *regs = S3C2412_SSMC_BANK(bank);
+
+	bt->idcy = s3c2412_decode_timing(clk, __raw_readl(regs + SMBIDCYR));
+	bt->wstrd = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTRDR));
+	bt->wstoen = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTOENR));
+	bt->wstwen = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTWENR));
+	bt->wstbrd = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTBRDR));
+}
+
+/**
+ * bank_is_io - return true if bank is (possibly) IO.
+ * @bank: The bank number.
+ * @bankcfg: The value of S3C2412_EBI_BANKCFG.
+ */
+static inline bool bank_is_io(unsigned int bank, u32 bankcfg)
+{
+	if (bank < 2)
+		return true;
+
+	return !(bankcfg & (1 << bank));
+}
+
+int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
+			 struct s3c_iotimings *timings)
+{
+	struct s3c2412_iobank_timing *bt;
+	u32 bankcfg = __raw_readl(S3C2412_EBI_BANKCFG);
+	unsigned int bank;
+
+	/* look through all banks to see what is currently set. */
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		if (!bank_is_io(bank, bankcfg))
+			continue;
+
+		bt = kzalloc(sizeof(struct s3c2412_iobank_timing), GFP_KERNEL);
+		if (!bt) {
+			printk(KERN_ERR "%s: no memory for bank\n", __func__);
+			return -ENOMEM;
+		}
+
+		timings->bank[bank].io_2412 = bt;
+		s3c2412_iotiming_getbank(cfg, bt, bank);
+	}
+
+	s3c2412_print_timing("get", timings);
+	return 0;
+}
+
+/* this is in here as it is so small, it doesn't currently warrant a file
+ * to itself. We expect that any s3c24xx needing this is going to also
+ * need the iotiming support.
+ */
+void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+	struct s3c_cpufreq_board *board = cfg->board;
+	u32 refresh;
+
+	WARN_ON(board == NULL);
+
+	/* Reduce both the refresh time (in ns) and the frequency (in MHz)
+	 * down to ensure that we do not overflow 32 bit numbers.
+	 *
+	 * This should work for HCLK up to 133MHz and refresh period up
+	 * to 30usec.
+	 */
+
+	refresh = (cfg->freq.hclk / 100) * (board->refresh / 10);
+	refresh = DIV_ROUND_UP(refresh, (1000 * 1000)); /* apply scale  */
+	refresh &= ((1 << 16) - 1);
+
+	s3c_freq_dbg("%s: refresh value %u\n", __func__, (unsigned int)refresh);
+
+	__raw_writel(refresh, S3C2412_REFRESH);
+}
diff --git a/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c b/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
new file mode 100644
index 0000000..ae2e6c6
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
@@ -0,0 +1,311 @@
+/* linux/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
+ *
+ * Copyright (c) 2006,2008,2009 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	Vincent Sanders <vince@simtec.co.uk>
+ *
+ * S3C2440/S3C2442 CPU Frequency scaling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/sysdev.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+#include <plat/clock.h>
+
+static struct clk *xtal;
+static struct clk *fclk;
+static struct clk *hclk;
+static struct clk *armclk;
+
+/* HDIV: 1, 2, 3, 4, 6, 8 */
+
+static inline int within_khz(unsigned long a, unsigned long b)
+{
+	long diff = a - b;
+
+	return (diff >= -1000 && diff <= 1000);
+}
+
+/**
+ * s3c2440_cpufreq_calcdivs - calculate divider settings
+ * @cfg: The cpu frequency settings.
+ *
+ * Calcualte the divider values for the given frequency settings
+ * specified in @cfg. The values are stored in @cfg for later use
+ * by the relevant set routine if the request settings can be reached.
+ */
+int s3c2440_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
+{
+	unsigned int hdiv, pdiv;
+	unsigned long hclk, fclk, armclk;
+	unsigned long hclk_max;
+
+	fclk = cfg->freq.fclk;
+	armclk = cfg->freq.armclk;
+	hclk_max = cfg->max.hclk;
+
+	s3c_freq_dbg("%s: fclk is %lu, armclk %lu, max hclk %lu\n",
+		     __func__, fclk, armclk, hclk_max);
+
+	if (armclk > fclk) {
+		printk(KERN_WARNING "%s: armclk > fclk\n", __func__);
+		armclk = fclk;
+	}
+
+	/* if we are in DVS, we need HCLK to be <= ARMCLK */
+	if (armclk < fclk && armclk < hclk_max)
+		hclk_max = armclk;
+
+	for (hdiv = 1; hdiv < 9; hdiv++) {
+		if (hdiv == 5 || hdiv == 7)
+			hdiv++;
+
+		hclk = (fclk / hdiv);
+		if (hclk <= hclk_max || within_khz(hclk, hclk_max))
+			break;
+	}
+
+	s3c_freq_dbg("%s: hclk %lu, div %d\n", __func__, hclk, hdiv);
+
+	if (hdiv > 8)
+		goto invalid;
+
+	pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
+
+	if ((hclk / pdiv) > cfg->max.pclk)
+		pdiv++;
+
+	s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv);
+
+	if (pdiv > 2)
+		goto invalid;
+
+	pdiv *= hdiv;
+
+	/* calculate a valid armclk */
+
+	if (armclk < hclk)
+		armclk = hclk;
+
+	/* if we're running armclk lower than fclk, this really means
+	 * that the system should go into dvs mode, which means that
+	 * armclk is connected to hclk. */
+	if (armclk < fclk) {
+		cfg->divs.dvs = 1;
+		armclk = hclk;
+	} else
+		cfg->divs.dvs = 0;
+
+	cfg->freq.armclk = armclk;
+
+	/* store the result, and then return */
+
+	cfg->divs.h_divisor = hdiv;
+	cfg->divs.p_divisor = pdiv;
+
+	return 0;
+
+ invalid:
+	return -EINVAL;
+}
+
+#define CAMDIVN_HCLK_HALF (S3C2440_CAMDIVN_HCLK3_HALF | \
+			   S3C2440_CAMDIVN_HCLK4_HALF)
+
+/**
+ * s3c2440_cpufreq_setdivs - set the cpu frequency divider settings
+ * @cfg: The cpu frequency settings.
+ *
+ * Set the divisors from the settings in @cfg, which where generated
+ * during the calculation phase by s3c2440_cpufreq_calcdivs().
+ */
+static void s3c2440_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
+{
+	unsigned long clkdiv, camdiv;
+
+	s3c_freq_dbg("%s: divsiors: h=%d, p=%d\n", __func__,
+		     cfg->divs.h_divisor, cfg->divs.p_divisor);
+
+	clkdiv = __raw_readl(S3C2410_CLKDIVN);
+	camdiv = __raw_readl(S3C2440_CAMDIVN);
+
+	clkdiv &= ~(S3C2440_CLKDIVN_HDIVN_MASK | S3C2440_CLKDIVN_PDIVN);
+	camdiv &= ~CAMDIVN_HCLK_HALF;
+
+	switch (cfg->divs.h_divisor) {
+	case 1:
+		clkdiv |= S3C2440_CLKDIVN_HDIVN_1;
+		break;
+
+	case 2:
+		clkdiv |= S3C2440_CLKDIVN_HDIVN_2;
+		break;
+
+	case 6:
+		camdiv |= S3C2440_CAMDIVN_HCLK3_HALF;
+	case 3:
+		clkdiv |= S3C2440_CLKDIVN_HDIVN_3_6;
+		break;
+
+	case 8:
+		camdiv |= S3C2440_CAMDIVN_HCLK4_HALF;
+	case 4:
+		clkdiv |= S3C2440_CLKDIVN_HDIVN_4_8;
+		break;
+
+	default:
+		BUG();	/* we don't expect to get here. */
+	}
+
+	if (cfg->divs.p_divisor != cfg->divs.h_divisor)
+		clkdiv |= S3C2440_CLKDIVN_PDIVN;
+
+	/* todo - set pclk. */
+
+	/* Write the divisors first with hclk intentionally halved so that
+	 * when we write clkdiv we will under-frequency instead of over. We
+	 * then make a short delay and remove the hclk halving if necessary.
+	 */
+
+	__raw_writel(camdiv | CAMDIVN_HCLK_HALF, S3C2440_CAMDIVN);
+	__raw_writel(clkdiv, S3C2410_CLKDIVN);
+
+	ndelay(20);
+	__raw_writel(camdiv, S3C2440_CAMDIVN);
+
+	clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk);
+}
+
+static int run_freq_for(unsigned long max_hclk, unsigned long fclk,
+			int *divs,
+			struct cpufreq_frequency_table *table,
+			size_t table_size)
+{
+	unsigned long freq;
+	int index = 0;
+	int div;
+
+	for (div = *divs; div > 0; div = *divs++) {
+		freq = fclk / div;
+
+		if (freq > max_hclk && div != 1)
+			continue;
+
+		freq /= 1000; /* table is in kHz */
+		index = s3c_cpufreq_addfreq(table, index, table_size, freq);
+		if (index < 0)
+			break;
+	}
+
+	return index;
+}
+
+static int hclk_divs[] = { 1, 2, 3, 4, 6, 8, -1 };
+
+static int s3c2440_cpufreq_calctable(struct s3c_cpufreq_config *cfg,
+				     struct cpufreq_frequency_table *table,
+				     size_t table_size)
+{
+	int ret;
+
+	WARN_ON(cfg->info == NULL);
+	WARN_ON(cfg->board == NULL);
+
+	ret = run_freq_for(cfg->info->max.hclk,
+			   cfg->info->max.fclk,
+			   hclk_divs,
+			   table, table_size);
+
+	s3c_freq_dbg("%s: returning %d\n", __func__, ret);
+
+	return ret;
+}
+
+struct s3c_cpufreq_info s3c2440_cpufreq_info = {
+	.max		= {
+		.fclk	= 400000000,
+		.hclk	= 133333333,
+		.pclk	=  66666666,
+	},
+
+	.locktime_m	= 300,
+	.locktime_u	= 300,
+	.locktime_bits	= 16,
+
+	.name		= "s3c244x",
+	.calc_iotiming	= s3c2410_iotiming_calc,
+	.set_iotiming	= s3c2410_iotiming_set,
+	.get_iotiming	= s3c2410_iotiming_get,
+	.set_fvco	= s3c2410_set_fvco,
+
+	.set_refresh	= s3c2410_cpufreq_setrefresh,
+	.set_divs	= s3c2440_cpufreq_setdivs,
+	.calc_divs	= s3c2440_cpufreq_calcdivs,
+	.calc_freqtable	= s3c2440_cpufreq_calctable,
+
+	.resume_clocks	= s3c244x_setup_clocks,
+
+	.debug_io_show  = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
+};
+
+static int s3c2440_cpufreq_add(struct sys_device *sysdev)
+{
+	xtal = s3c_cpufreq_clk_get(NULL, "xtal");
+	hclk = s3c_cpufreq_clk_get(NULL, "hclk");
+	fclk = s3c_cpufreq_clk_get(NULL, "fclk");
+	armclk = s3c_cpufreq_clk_get(NULL, "armclk");
+
+	if (IS_ERR(xtal) || IS_ERR(hclk) || IS_ERR(fclk) || IS_ERR(armclk)) {
+		printk(KERN_ERR "%s: failed to get clocks\n", __func__);
+		return -ENOENT;
+	}
+
+	return s3c_cpufreq_register(&s3c2440_cpufreq_info);
+}
+
+static struct sysdev_driver s3c2440_cpufreq_driver = {
+	.add		= s3c2440_cpufreq_add,
+};
+
+static int s3c2440_cpufreq_init(void)
+{
+	return sysdev_driver_register(&s3c2440_sysclass,
+				      &s3c2440_cpufreq_driver);
+}
+
+/* arch_initcall adds the clocks we need, so use subsys_initcall. */
+subsys_initcall(s3c2440_cpufreq_init);
+
+static struct sysdev_driver s3c2442_cpufreq_driver = {
+	.add		= s3c2440_cpufreq_add,
+};
+
+static int s3c2442_cpufreq_init(void)
+{
+	return sysdev_driver_register(&s3c2442_sysclass,
+				      &s3c2442_cpufreq_driver);
+}
+
+subsys_initcall(s3c2442_cpufreq_init);
diff --git a/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c b/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
new file mode 100644
index 0000000..ff9443b
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
@@ -0,0 +1,97 @@
+/* arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
+ *
+ * Copyright (c) 2006,2007 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	Vincent Sanders <vince@arm.linux.org.uk>
+ *
+ * S3C2440/S3C2442 CPU PLL tables (12MHz Crystal)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sysdev.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+
+static struct cpufreq_frequency_table s3c2440_plls_12[] __initdata = {
+	{ .frequency = 75000000,	.index = PLLVAL(0x75, 3, 3),  }, 	/* FVco 600.000000 */
+	{ .frequency = 80000000,	.index = PLLVAL(0x98, 4, 3),  }, 	/* FVco 640.000000 */
+	{ .frequency = 90000000,	.index = PLLVAL(0x70, 2, 3),  }, 	/* FVco 720.000000 */
+	{ .frequency = 100000000,	.index = PLLVAL(0x5c, 1, 3),  }, 	/* FVco 800.000000 */
+	{ .frequency = 110000000,	.index = PLLVAL(0x66, 1, 3),  }, 	/* FVco 880.000000 */
+	{ .frequency = 120000000,	.index = PLLVAL(0x70, 1, 3),  }, 	/* FVco 960.000000 */
+	{ .frequency = 150000000,	.index = PLLVAL(0x75, 3, 2),  }, 	/* FVco 600.000000 */
+	{ .frequency = 160000000,	.index = PLLVAL(0x98, 4, 2),  }, 	/* FVco 640.000000 */
+	{ .frequency = 170000000,	.index = PLLVAL(0x4d, 1, 2),  }, 	/* FVco 680.000000 */
+	{ .frequency = 180000000,	.index = PLLVAL(0x70, 2, 2),  }, 	/* FVco 720.000000 */
+	{ .frequency = 190000000,	.index = PLLVAL(0x57, 1, 2),  }, 	/* FVco 760.000000 */
+	{ .frequency = 200000000,	.index = PLLVAL(0x5c, 1, 2),  }, 	/* FVco 800.000000 */
+	{ .frequency = 210000000,	.index = PLLVAL(0x84, 2, 2),  }, 	/* FVco 840.000000 */
+	{ .frequency = 220000000,	.index = PLLVAL(0x66, 1, 2),  }, 	/* FVco 880.000000 */
+	{ .frequency = 230000000,	.index = PLLVAL(0x6b, 1, 2),  }, 	/* FVco 920.000000 */
+	{ .frequency = 240000000,	.index = PLLVAL(0x70, 1, 2),  }, 	/* FVco 960.000000 */
+	{ .frequency = 300000000,	.index = PLLVAL(0x75, 3, 1),  }, 	/* FVco 600.000000 */
+	{ .frequency = 310000000,	.index = PLLVAL(0x93, 4, 1),  }, 	/* FVco 620.000000 */
+	{ .frequency = 320000000,	.index = PLLVAL(0x98, 4, 1),  }, 	/* FVco 640.000000 */
+	{ .frequency = 330000000,	.index = PLLVAL(0x66, 2, 1),  }, 	/* FVco 660.000000 */
+	{ .frequency = 340000000,	.index = PLLVAL(0x4d, 1, 1),  }, 	/* FVco 680.000000 */
+	{ .frequency = 350000000,	.index = PLLVAL(0xa7, 4, 1),  }, 	/* FVco 700.000000 */
+	{ .frequency = 360000000,	.index = PLLVAL(0x70, 2, 1),  }, 	/* FVco 720.000000 */
+	{ .frequency = 370000000,	.index = PLLVAL(0xb1, 4, 1),  }, 	/* FVco 740.000000 */
+	{ .frequency = 380000000,	.index = PLLVAL(0x57, 1, 1),  }, 	/* FVco 760.000000 */
+	{ .frequency = 390000000,	.index = PLLVAL(0x7a, 2, 1),  }, 	/* FVco 780.000000 */
+	{ .frequency = 400000000,	.index = PLLVAL(0x5c, 1, 1),  }, 	/* FVco 800.000000 */
+};
+
+static int s3c2440_plls12_add(struct sys_device *dev)
+{
+	struct clk *xtal_clk;
+	unsigned long xtal;
+
+	xtal_clk = clk_get(NULL, "xtal");
+	if (IS_ERR(xtal_clk))
+		return PTR_ERR(xtal_clk);
+
+	xtal = clk_get_rate(xtal_clk);
+	clk_put(xtal_clk);
+
+	if (xtal == 12000000) {
+		printk(KERN_INFO "Using PLL table for 12MHz crystal\n");
+		return s3c_plltab_register(s3c2440_plls_12,
+					   ARRAY_SIZE(s3c2440_plls_12));
+	}
+
+	return 0;
+}
+
+static struct sysdev_driver s3c2440_plls12_drv = {
+	.add	= s3c2440_plls12_add,
+};
+
+static int __init s3c2440_pll_12mhz(void)
+{
+	return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_plls12_drv);
+
+}
+
+arch_initcall(s3c2440_pll_12mhz);
+
+static struct sysdev_driver s3c2442_plls12_drv = {
+	.add	= s3c2440_plls12_add,
+};
+
+static int __init s3c2442_pll_12mhz(void)
+{
+	return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_plls12_drv);
+
+}
+
+arch_initcall(s3c2442_pll_12mhz);
diff --git a/arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c b/arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c
new file mode 100644
index 0000000..7679af1
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c
@@ -0,0 +1,127 @@
+/* arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c
+ *
+ * Copyright (c) 2006-2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	Vincent Sanders <vince@arm.linux.org.uk>
+ *
+ * S3C2440/S3C2442 CPU PLL tables (16.93444MHz Crystal)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sysdev.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+
+static struct cpufreq_frequency_table s3c2440_plls_169344[] __initdata = {
+	{ .frequency = 78019200,	.index = PLLVAL(121, 5, 3), 	}, 	/* FVco 624.153600 */
+	{ .frequency = 84067200,	.index = PLLVAL(131, 5, 3), 	}, 	/* FVco 672.537600 */
+	{ .frequency = 90115200,	.index = PLLVAL(141, 5, 3), 	}, 	/* FVco 720.921600 */
+	{ .frequency = 96163200,	.index = PLLVAL(151, 5, 3), 	}, 	/* FVco 769.305600 */
+	{ .frequency = 102135600,	.index = PLLVAL(185, 6, 3), 	}, 	/* FVco 817.084800 */
+	{ .frequency = 108259200,	.index = PLLVAL(171, 5, 3), 	}, 	/* FVco 866.073600 */
+	{ .frequency = 114307200,	.index = PLLVAL(127, 3, 3), 	}, 	/* FVco 914.457600 */
+	{ .frequency = 120234240,	.index = PLLVAL(134, 3, 3), 	}, 	/* FVco 961.873920 */
+	{ .frequency = 126161280,	.index = PLLVAL(141, 3, 3), 	}, 	/* FVco 1009.290240 */
+	{ .frequency = 132088320,	.index = PLLVAL(148, 3, 3), 	}, 	/* FVco 1056.706560 */
+	{ .frequency = 138015360,	.index = PLLVAL(155, 3, 3), 	}, 	/* FVco 1104.122880 */
+	{ .frequency = 144789120,	.index = PLLVAL(163, 3, 3), 	}, 	/* FVco 1158.312960 */
+	{ .frequency = 150100363,	.index = PLLVAL(187, 9, 2), 	}, 	/* FVco 600.401454 */
+	{ .frequency = 156038400,	.index = PLLVAL(121, 5, 2), 	}, 	/* FVco 624.153600 */
+	{ .frequency = 162086400,	.index = PLLVAL(126, 5, 2), 	}, 	/* FVco 648.345600 */
+	{ .frequency = 168134400,	.index = PLLVAL(131, 5, 2), 	}, 	/* FVco 672.537600 */
+	{ .frequency = 174048000,	.index = PLLVAL(177, 7, 2), 	}, 	/* FVco 696.192000 */
+	{ .frequency = 180230400,	.index = PLLVAL(141, 5, 2), 	}, 	/* FVco 720.921600 */
+	{ .frequency = 186278400,	.index = PLLVAL(124, 4, 2), 	}, 	/* FVco 745.113600 */
+	{ .frequency = 192326400,	.index = PLLVAL(151, 5, 2), 	}, 	/* FVco 769.305600 */
+	{ .frequency = 198132480,	.index = PLLVAL(109, 3, 2), 	}, 	/* FVco 792.529920 */
+	{ .frequency = 204271200,	.index = PLLVAL(185, 6, 2), 	}, 	/* FVco 817.084800 */
+	{ .frequency = 210268800,	.index = PLLVAL(141, 4, 2), 	}, 	/* FVco 841.075200 */
+	{ .frequency = 216518400,	.index = PLLVAL(171, 5, 2), 	}, 	/* FVco 866.073600 */
+	{ .frequency = 222264000,	.index = PLLVAL(97, 2, 2), 	}, 	/* FVco 889.056000 */
+	{ .frequency = 228614400,	.index = PLLVAL(127, 3, 2), 	}, 	/* FVco 914.457600 */
+	{ .frequency = 234259200,	.index = PLLVAL(158, 4, 2), 	}, 	/* FVco 937.036800 */
+	{ .frequency = 240468480,	.index = PLLVAL(134, 3, 2), 	}, 	/* FVco 961.873920 */
+	{ .frequency = 246960000,	.index = PLLVAL(167, 4, 2), 	}, 	/* FVco 987.840000 */
+	{ .frequency = 252322560,	.index = PLLVAL(141, 3, 2), 	}, 	/* FVco 1009.290240 */
+	{ .frequency = 258249600,	.index = PLLVAL(114, 2, 2), 	}, 	/* FVco 1032.998400 */
+	{ .frequency = 264176640,	.index = PLLVAL(148, 3, 2), 	}, 	/* FVco 1056.706560 */
+	{ .frequency = 270950400,	.index = PLLVAL(120, 2, 2), 	}, 	/* FVco 1083.801600 */
+	{ .frequency = 276030720,	.index = PLLVAL(155, 3, 2), 	}, 	/* FVco 1104.122880 */
+	{ .frequency = 282240000,	.index = PLLVAL(92, 1, 2), 	}, 	/* FVco 1128.960000 */
+	{ .frequency = 289578240,	.index = PLLVAL(163, 3, 2), 	}, 	/* FVco 1158.312960 */
+	{ .frequency = 294235200,	.index = PLLVAL(131, 2, 2), 	}, 	/* FVco 1176.940800 */
+	{ .frequency = 300200727,	.index = PLLVAL(187, 9, 1), 	}, 	/* FVco 600.401454 */
+	{ .frequency = 306358690,	.index = PLLVAL(191, 9, 1), 	}, 	/* FVco 612.717380 */
+	{ .frequency = 312076800,	.index = PLLVAL(121, 5, 1), 	}, 	/* FVco 624.153600 */
+	{ .frequency = 318366720,	.index = PLLVAL(86, 3, 1), 	}, 	/* FVco 636.733440 */
+	{ .frequency = 324172800,	.index = PLLVAL(126, 5, 1), 	}, 	/* FVco 648.345600 */
+	{ .frequency = 330220800,	.index = PLLVAL(109, 4, 1), 	}, 	/* FVco 660.441600 */
+	{ .frequency = 336268800,	.index = PLLVAL(131, 5, 1), 	}, 	/* FVco 672.537600 */
+	{ .frequency = 342074880,	.index = PLLVAL(93, 3, 1), 	}, 	/* FVco 684.149760 */
+	{ .frequency = 348096000,	.index = PLLVAL(177, 7, 1), 	}, 	/* FVco 696.192000 */
+	{ .frequency = 355622400,	.index = PLLVAL(118, 4, 1), 	}, 	/* FVco 711.244800 */
+	{ .frequency = 360460800,	.index = PLLVAL(141, 5, 1), 	}, 	/* FVco 720.921600 */
+	{ .frequency = 366206400,	.index = PLLVAL(165, 6, 1), 	}, 	/* FVco 732.412800 */
+	{ .frequency = 372556800,	.index = PLLVAL(124, 4, 1), 	}, 	/* FVco 745.113600 */
+	{ .frequency = 378201600,	.index = PLLVAL(126, 4, 1), 	}, 	/* FVco 756.403200 */
+	{ .frequency = 384652800,	.index = PLLVAL(151, 5, 1), 	}, 	/* FVco 769.305600 */
+	{ .frequency = 391608000,	.index = PLLVAL(177, 6, 1), 	}, 	/* FVco 783.216000 */
+	{ .frequency = 396264960,	.index = PLLVAL(109, 3, 1), 	}, 	/* FVco 792.529920 */
+	{ .frequency = 402192000,	.index = PLLVAL(87, 2, 1), 	}, 	/* FVco 804.384000 */
+};
+
+static int s3c2440_plls169344_add(struct sys_device *dev)
+{
+	struct clk *xtal_clk;
+	unsigned long xtal;
+
+	xtal_clk = clk_get(NULL, "xtal");
+	if (IS_ERR(xtal_clk))
+		return PTR_ERR(xtal_clk);
+
+	xtal = clk_get_rate(xtal_clk);
+	clk_put(xtal_clk);
+
+	if (xtal == 169344000) {
+		printk(KERN_INFO "Using PLL table for 16.9344MHz crystal\n");
+		return s3c_plltab_register(s3c2440_plls_169344,
+					   ARRAY_SIZE(s3c2440_plls_169344));
+	}
+
+	return 0;
+}
+
+static struct sysdev_driver s3c2440_plls169344_drv = {
+	.add	= s3c2440_plls169344_add,
+};
+
+static int __init s3c2440_pll_16934400(void)
+{
+	return sysdev_driver_register(&s3c2440_sysclass,
+				      &s3c2440_plls169344_drv);
+
+}
+
+arch_initcall(s3c2440_pll_16934400);
+
+static struct sysdev_driver s3c2442_plls169344_drv = {
+	.add	= s3c2440_plls169344_add,
+};
+
+static int __init s3c2442_pll_16934400(void)
+{
+	return sysdev_driver_register(&s3c2442_sysclass,
+				      &s3c2442_plls169344_drv);
+
+}
+
+arch_initcall(s3c2442_pll_16934400);