Merge branch 'master'

78 files changed, 6164 insertions, 1068 deletions

diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 7779f2d..299bc04 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -53,7 +53,7 @@ tune-$(CONFIG_CPU_ARM926T)	:=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_SA110)	:=-mtune=strongarm110
 tune-$(CONFIG_CPU_SA1100)	:=-mtune=strongarm1100
 tune-$(CONFIG_CPU_XSCALE)	:=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
-tune-$(CONFIG_CPU_V6)		:=-mtune=strongarm
+tune-$(CONFIG_CPU_V6)		:=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
 
 # Need -Uarm for gcc < 3.x
 CFLAGS_ABI	:=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) $(call cc-option,-mno-thumb-interwork,)
diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c
index d3a04c2..9e5245c 100644
--- a/arch/arm/common/scoop.c
+++ b/arch/arm/common/scoop.c
@@ -26,6 +26,8 @@ struct scoop_pcmcia_dev *scoop_devs;
 struct  scoop_dev {
 	void  *base;
 	spinlock_t scoop_lock;
+	unsigned short suspend_clr;
+	unsigned short suspend_set;
 	u32 scoop_gpwr;
 };
 
@@ -90,14 +92,24 @@ EXPORT_SYMBOL(reset_scoop);
 EXPORT_SYMBOL(read_scoop_reg);
 EXPORT_SYMBOL(write_scoop_reg);
 
+static void check_scoop_reg(struct scoop_dev *sdev)
+{
+	unsigned short mcr;
+
+	mcr = SCOOP_REG(sdev->base, SCOOP_MCR);
+	if ((mcr & 0x100) == 0)
+		SCOOP_REG(sdev->base, SCOOP_MCR) = 0x0101;
+}
+
 #ifdef CONFIG_PM
 static int scoop_suspend(struct device *dev, pm_message_t state, uint32_t level)
 {
 	if (level == SUSPEND_POWER_DOWN) {
 		struct scoop_dev *sdev = dev_get_drvdata(dev);
 
-		sdev->scoop_gpwr = SCOOP_REG(sdev->base,SCOOP_GPWR);
-		SCOOP_REG(sdev->base,SCOOP_GPWR) = 0;
+		check_scoop_reg(sdev);
+  		sdev->scoop_gpwr = SCOOP_REG(sdev->base, SCOOP_GPWR);
+		SCOOP_REG(sdev->base, SCOOP_GPWR) = (sdev->scoop_gpwr & ~sdev->suspend_clr) | sdev->suspend_set;
 	}
 	return 0;
 }
@@ -107,6 +119,7 @@ static int scoop_resume(struct device *dev, uint32_t level)
 	if (level == RESUME_POWER_ON) {
 		struct scoop_dev *sdev = dev_get_drvdata(dev);
 
+		check_scoop_reg(sdev);
 		SCOOP_REG(sdev->base,SCOOP_GPWR) = sdev->scoop_gpwr;
 	}
 	return 0;
@@ -151,6 +164,9 @@ int __init scoop_probe(struct device *dev)
 	SCOOP_REG(devptr->base, SCOOP_GPCR) = inf->io_dir & 0xffff;
 	SCOOP_REG(devptr->base, SCOOP_GPWR) = inf->io_out & 0xffff;
 
+	devptr->suspend_clr = inf->suspend_clr;
+	devptr->suspend_set = inf->suspend_set;
+
 	return 0;
 }
 
diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig
new file mode 100644
index 0000000..40dfe07
--- /dev/null
+++ b/arch/arm/configs/collie_defconfig
@@ -0,0 +1,888 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14-rc3
+# Sun Oct  9 16:55:14 2005
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+# CONFIG_CLEAN_COMPILE is not set
+CONFIG_BROKEN=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_CAMELOT is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+CONFIG_ARCH_SA1100=y
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
+
+#
+# SA11x0 Implementations
+#
+# CONFIG_SA1100_ASSABET is not set
+# CONFIG_SA1100_CERF is not set
+CONFIG_SA1100_COLLIE=y
+# CONFIG_SA1100_H3100 is not set
+# CONFIG_SA1100_H3600 is not set
+# CONFIG_SA1100_H3800 is not set
+# CONFIG_SA1100_BADGE4 is not set
+# CONFIG_SA1100_JORNADA720 is not set
+# CONFIG_SA1100_HACKKIT is not set
+# CONFIG_SA1100_LART is not set
+# CONFIG_SA1100_PLEB is not set
+# CONFIG_SA1100_SHANNON is not set
+# CONFIG_SA1100_SIMPAD is not set
+# CONFIG_SA1100_SSP is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_SA1100=y
+CONFIG_CPU_32v4=y
+CONFIG_CPU_ABRT_EV4=y
+CONFIG_CPU_CACHE_V4WB=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WB=y
+
+#
+# Processor Features
+#
+CONFIG_SHARP_LOCOMO=y
+CONFIG_SHARP_PARAM=y
+CONFIG_SHARP_SCOOP=y
+
+#
+# Bus support
+#
+CONFIG_ISA=y
+CONFIG_ISA_DMA_API=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_SMP is not set
+CONFIG_PREEMPT=y
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2   debug"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_APM=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+CONFIG_MTD_OBSOLETE_CHIPS=y
+# CONFIG_MTD_AMDSTD is not set
+CONFIG_MTD_SHARP=y
+# CONFIG_MTD_JEDEC is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNP is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_XD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=1024
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_ATA_OVER_ETH=m
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+# CONFIG_NETDEVICES is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_TSDEV=y
+CONFIG_INPUT_TSDEV_SCREEN_X=240
+CONFIG_INPUT_TSDEV_SCREEN_Y=320
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=y
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_LOCOMO=y
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SA1100=y
+CONFIG_SERIAL_SA1100_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_NVRAM is not set
+# CONFIG_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+
+#
+# I2C support
+#
+CONFIG_I2C=m
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=m
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ELEKTOR is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+# CONFIG_MCP_SA11X0 is not set
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=m
+
+#
+# Video For Linux
+#
+
+#
+# Video Adapters
+#
+# CONFIG_VIDEO_PMS is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_TUNER_3036 is not set
+# CONFIG_VIDEO_OVCAMCHIP is not set
+
+#
+# Radio Adapters
+#
+# CONFIG_RADIO_CADET is not set
+# CONFIG_RADIO_RTRACK is not set
+# CONFIG_RADIO_RTRACK2 is not set
+# CONFIG_RADIO_AZTECH is not set
+# CONFIG_RADIO_GEMTEK is not set
+# CONFIG_RADIO_MAESTRO is not set
+# CONFIG_RADIO_SF16FMI is not set
+# CONFIG_RADIO_SF16FMR2 is not set
+# CONFIG_RADIO_TERRATEC is not set
+# CONFIG_RADIO_TRUST is not set
+# CONFIG_RADIO_TYPHOON is not set
+# CONFIG_RADIO_ZOLTRIX is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+CONFIG_FB_SA1100=y
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB is not set
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="cp437"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_WAITQ is not set
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig
new file mode 100644
index 0000000..24987c8
--- /dev/null
+++ b/arch/arm/configs/corgi_defconfig
@@ -0,0 +1,1523 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14-rc3
+# Sun Oct  9 15:46:42 2005
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_CAMELOT is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_L7200 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
+
+#
+# Intel PXA2xx Implementations
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+CONFIG_PXA_SHARPSL=y
+CONFIG_PXA_SHARPSL_25x=y
+# CONFIG_PXA_SHARPSL_27x is not set
+# CONFIG_MACH_POODLE is not set
+CONFIG_MACH_CORGI=y
+CONFIG_MACH_SHEPHERD=y
+CONFIG_MACH_HUSKY=y
+CONFIG_PXA25x=y
+CONFIG_PXA_SHARP_C7xx=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+CONFIG_XSCALE_PMU=y
+CONFIG_SHARP_PARAM=y
+CONFIG_SHARP_SCOOP=y
+
+#
+# Bus support
+#
+CONFIG_ISA_DMA_API=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+
+#
+# PC-card bridges
+#
+CONFIG_PCMCIA_PXA2XX=y
+
+#
+# Kernel Features
+#
+CONFIG_PREEMPT=y
+# CONFIG_NO_IDLE_HZ is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2   debug"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_APM=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_NETLINK is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+# CONFIG_IP_NF_CT_ACCT is not set
+# CONFIG_IP_NF_CONNTRACK_MARK is not set
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+CONFIG_IP_NF_CT_PROTO_SCTP=m
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_LIMIT=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_MAC=m
+CONFIG_IP_NF_MATCH_PKTTYPE=m
+CONFIG_IP_NF_MATCH_MARK=m
+CONFIG_IP_NF_MATCH_MULTIPORT=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_DSCP=m
+CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_TCPMSS=m
+CONFIG_IP_NF_MATCH_HELPER=m
+CONFIG_IP_NF_MATCH_STATE=m
+CONFIG_IP_NF_MATCH_CONNTRACK=m
+CONFIG_IP_NF_MATCH_OWNER=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_REALM=m
+CONFIG_IP_NF_MATCH_SCTP=m
+# CONFIG_IP_NF_MATCH_DCCP is not set
+CONFIG_IP_NF_MATCH_COMMENT=m
+CONFIG_IP_NF_MATCH_HASHLIMIT=m
+# CONFIG_IP_NF_MATCH_STRING is not set
+CONFIG_IP_NF_FILTER=m
+# CONFIG_IP_NF_TARGET_REJECT is not set
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=m
+# CONFIG_IP_NF_TARGET_NFQUEUE is not set
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_NAT_NEEDED=y
+# CONFIG_IP_NF_TARGET_MASQUERADE is not set
+# CONFIG_IP_NF_TARGET_REDIRECT is not set
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_SAME is not set
+# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
+CONFIG_IP_NF_NAT_IRC=m
+CONFIG_IP_NF_NAT_FTP=m
+CONFIG_IP_NF_NAT_TFTP=m
+CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_MANGLE=m
+# CONFIG_IP_NF_TARGET_TOS is not set
+# CONFIG_IP_NF_TARGET_ECN is not set
+# CONFIG_IP_NF_TARGET_DSCP is not set
+# CONFIG_IP_NF_TARGET_MARK is not set
+# CONFIG_IP_NF_TARGET_CLASSIFY is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
+CONFIG_IP_NF_RAW=m
+# CONFIG_IP_NF_TARGET_NOTRACK is not set
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_LIMIT=m
+CONFIG_IP6_NF_MATCH_MAC=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_MULTIPORT=m
+CONFIG_IP6_NF_MATCH_OWNER=m
+CONFIG_IP6_NF_MATCH_MARK=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AHESP=m
+CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+# CONFIG_IP6_NF_TARGET_LOG is not set
+# CONFIG_IP6_NF_TARGET_REJECT is not set
+# CONFIG_IP6_NF_TARGET_NFQUEUE is not set
+CONFIG_IP6_NF_MANGLE=m
+# CONFIG_IP6_NF_TARGET_MARK is not set
+# CONFIG_IP6_NF_TARGET_HL is not set
+CONFIG_IP6_NF_RAW=m
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+# CONFIG_IRDA_CACHE_LAST_LSAP is not set
+# CONFIG_IRDA_FAST_RR is not set
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+# CONFIG_IRTTY_SIR is not set
+
+#
+# Dongle support
+#
+
+#
+# Old SIR device drivers
+#
+# CONFIG_IRPORT_SIR is not set
+
+#
+# Old Serial dongle support
+#
+
+#
+# FIR device drivers
+#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
+# CONFIG_NSC_FIR is not set
+# CONFIG_WINBOND_FIR is not set
+# CONFIG_SMC_IRCC_FIR is not set
+# CONFIG_ALI_FIR is not set
+# CONFIG_VIA_FIR is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUSB=m
+# CONFIG_BT_HCIUSB_SCO is not set
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_BCSP_TXCRC=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIDTL1=m
+CONFIG_BT_HCIBT3C=m
+CONFIG_BT_HCIBLUECARD=m
+CONFIG_BT_HCIBTUART=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+# CONFIG_IEEE80211_CRYPT_CCMP is not set
+# CONFIG_IEEE80211_CRYPT_TKIP is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+CONFIG_MTD_ROM=y
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_SHARP_SL=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_H1900 is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_SHARPSL=y
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECS=y
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# PCMCIA SCSI adapter support
+#
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+# CONFIG_PCMCIA_WAVELAN is not set
+# CONFIG_PCMCIA_NETWAVE is not set
+
+#
+# Wireless 802.11 Frequency Hopping cards support
+#
+# CONFIG_PCMCIA_RAYCS is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+CONFIG_HERMES=m
+# CONFIG_ATMEL is not set
+
+#
+# Wireless 802.11b Pcmcia/Cardbus cards support
+#
+CONFIG_PCMCIA_HERMES=m
+CONFIG_PCMCIA_SPECTRUM=m
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_CS=m
+CONFIG_NET_WIRELESS=y
+
+#
+# PCMCIA network device support
+#
+CONFIG_NET_PCMCIA=y
+# CONFIG_PCMCIA_3C589 is not set
+# CONFIG_PCMCIA_3C574 is not set
+# CONFIG_PCMCIA_FMVJ18X is not set
+CONFIG_PCMCIA_PCNET=m
+# CONFIG_PCMCIA_NMCLAN is not set
+# CONFIG_PCMCIA_SMC91C92 is not set
+# CONFIG_PCMCIA_XIRC2PS is not set
+# CONFIG_PCMCIA_AXNET is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPPOE is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_KEYBOARD_CORGI=y
+CONFIG_KEYBOARD_SPITZ=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_CORGI=y
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_UINPUT=m
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=m
+CONFIG_SERIAL_8250_CS=m
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_NVRAM is not set
+# CONFIG_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=m
+
+#
+# Video For Linux
+#
+
+#
+# Video Adapters
+#
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_TUNER_3036 is not set
+# CONFIG_VIDEO_OVCAMCHIP is not set
+
+#
+# Radio Adapters
+#
+# CONFIG_RADIO_MAESTRO is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_PXA is not set
+CONFIG_FB_W100=y
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_DEVICE=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CORGI=y
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+# CONFIG_SND is not set
+
+#
+# Open Sound System
+#
+CONFIG_SOUND_PRIME=y
+# CONFIG_SOUND_MSNDCLAS is not set
+# CONFIG_SOUND_MSNDPIN is not set
+CONFIG_SOUND_OSS=y
+# CONFIG_SOUND_TRACEINIT is not set
+# CONFIG_SOUND_DMAP is not set
+# CONFIG_SOUND_AD1816 is not set
+# CONFIG_SOUND_SGALAXY is not set
+# CONFIG_SOUND_ADLIB is not set
+# CONFIG_SOUND_ACI_MIXER is not set
+# CONFIG_SOUND_CS4232 is not set
+# CONFIG_SOUND_SSCAPE is not set
+# CONFIG_SOUND_GUS is not set
+# CONFIG_SOUND_VMIDI is not set
+# CONFIG_SOUND_TRIX is not set
+# CONFIG_SOUND_MSS is not set
+# CONFIG_SOUND_MPU401 is not set
+# CONFIG_SOUND_NM256 is not set
+# CONFIG_SOUND_MAD16 is not set
+# CONFIG_SOUND_PAS is not set
+# CONFIG_SOUND_PSS is not set
+# CONFIG_SOUND_SB is not set
+# CONFIG_SOUND_AWE32_SYNTH is not set
+# CONFIG_SOUND_WAVEFRONT is not set
+# CONFIG_SOUND_MAUI is not set
+# CONFIG_SOUND_YM3812 is not set
+# CONFIG_SOUND_OPL3SA1 is not set
+# CONFIG_SOUND_OPL3SA2 is not set
+# CONFIG_SOUND_UART6850 is not set
+# CONFIG_SOUND_AEDSP16 is not set
+# CONFIG_SOUND_TVMIXER is not set
+# CONFIG_SOUND_AD1980 is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_SL811_HCD=m
+CONFIG_USB_SL811_CS=m
+
+#
+# USB Device Class drivers
+#
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
+
+#
+# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+CONFIG_USB_HIDINPUT=y
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+CONFIG_USB_KBD=m
+CONFIG_USB_MOUSE=m
+CONFIG_USB_AIPTEK=m
+CONFIG_USB_WACOM=m
+# CONFIG_USB_ACECAD is not set
+CONFIG_USB_KBTAB=m
+CONFIG_USB_POWERMATE=m
+CONFIG_USB_MTOUCH=m
+# CONFIG_USB_ITMTOUCH is not set
+CONFIG_USB_EGALAX=m
+# CONFIG_USB_YEALINK is not set
+CONFIG_USB_XPAD=m
+CONFIG_USB_ATI_REMOTE=m
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+
+#
+# USB Multimedia devices
+#
+CONFIG_USB_DABUSB=m
+CONFIG_USB_VICAM=m
+CONFIG_USB_DSBR=m
+CONFIG_USB_IBMCAM=m
+CONFIG_USB_KONICAWC=m
+CONFIG_USB_OV511=m
+CONFIG_USB_SE401=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_STV680=m
+# CONFIG_USB_PWC is not set
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=m
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+CONFIG_USB_NET_ZAURUS=m
+# CONFIG_USB_ZD1201 is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+CONFIG_USB_SERIAL_BELKIN=m
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+# CONFIG_USB_SERIAL_CP2101 is not set
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_HP4X is not set
+CONFIG_USB_SERIAL_SAFE=m
+# CONFIG_USB_SERIAL_SAFE_PADDED is not set
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_EZUSB=y
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_AUERSWALD=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_LED=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_PHIDGETKIT=m
+CONFIG_USB_PHIDGETSERVO=m
+CONFIG_USB_IDMOUSE=m
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_NET2280 is not set
+CONFIG_USB_GADGET_PXA2XX=y
+CONFIG_USB_PXA2XX=y
+# CONFIG_USB_PXA2XX_SMALL is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+
+#
+# MMC/SD Card support
+#
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_PXA=y
+# CONFIG_MMC_WBSD is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_SMB_NLS_REMOTE="cp437"
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="cp437"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+
+#
+# Profiling support
+#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_WAITQ is not set
+CONFIG_DEBUG_ERRORS=y
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/poodle_defconfig b/arch/arm/configs/poodle_defconfig
new file mode 100644
index 0000000..7282290
--- /dev/null
+++ b/arch/arm/configs/poodle_defconfig
@@ -0,0 +1,1015 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14-rc3
+# Sun Oct  9 17:04:29 2005
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_CAMELOT is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_L7200 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
+
+#
+# Intel PXA2xx Implementations
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+CONFIG_PXA_SHARPSL=y
+CONFIG_PXA_SHARPSL_25x=y
+# CONFIG_PXA_SHARPSL_27x is not set
+CONFIG_MACH_POODLE=y
+# CONFIG_MACH_CORGI is not set
+# CONFIG_MACH_SHEPHERD is not set
+# CONFIG_MACH_HUSKY is not set
+CONFIG_PXA25x=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+CONFIG_XSCALE_PMU=y
+CONFIG_SHARP_LOCOMO=y
+CONFIG_SHARP_PARAM=y
+CONFIG_SHARP_SCOOP=y
+
+#
+# Bus support
+#
+CONFIG_ISA_DMA_API=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+
+#
+# PC-card bridges
+#
+CONFIG_PCMCIA_PXA2XX=y
+
+#
+# Kernel Features
+#
+CONFIG_PREEMPT=y
+# CONFIG_NO_IDLE_HZ is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2   debug"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_APM=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_SHARP_SL=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_H1900 is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_SHARPSL=y
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECS=y
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+# CONFIG_PCMCIA_WAVELAN is not set
+# CONFIG_PCMCIA_NETWAVE is not set
+
+#
+# Wireless 802.11 Frequency Hopping cards support
+#
+# CONFIG_PCMCIA_RAYCS is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+# CONFIG_HERMES is not set
+# CONFIG_ATMEL is not set
+
+#
+# Wireless 802.11b Pcmcia/Cardbus cards support
+#
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_HOSTAP is not set
+CONFIG_NET_WIRELESS=y
+
+#
+# PCMCIA network device support
+#
+CONFIG_NET_PCMCIA=y
+# CONFIG_PCMCIA_3C589 is not set
+# CONFIG_PCMCIA_3C574 is not set
+# CONFIG_PCMCIA_FMVJ18X is not set
+CONFIG_PCMCIA_PCNET=y
+# CONFIG_PCMCIA_NMCLAN is not set
+# CONFIG_PCMCIA_SMC91C92 is not set
+# CONFIG_PCMCIA_XIRC2PS is not set
+# CONFIG_PCMCIA_AXNET is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPPOE is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_TSDEV=y
+CONFIG_INPUT_TSDEV_SCREEN_X=240
+CONFIG_INPUT_TSDEV_SCREEN_Y=320
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=y
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_LOCOMO=y
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_CORGI is not set
+CONFIG_KEYBOARD_SPITZ=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_NVRAM is not set
+# CONFIG_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_PXA is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+CONFIG_I2C_DEBUG_CORE=y
+CONFIG_I2C_DEBUG_ALGO=y
+CONFIG_I2C_DEBUG_BUS=y
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=m
+
+#
+# Video For Linux
+#
+
+#
+# Video Adapters
+#
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_TUNER_3036 is not set
+# CONFIG_VIDEO_OVCAMCHIP is not set
+
+#
+# Radio Adapters
+#
+# CONFIG_RADIO_MAESTRO is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_W100 is not set
+# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB is not set
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_NET2280 is not set
+CONFIG_USB_GADGET_PXA2XX=y
+CONFIG_USB_PXA2XX=y
+# CONFIG_USB_PXA2XX_SMALL is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+
+#
+# MMC/SD Card support
+#
+CONFIG_MMC=y
+CONFIG_MMC_DEBUG=y
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_PXA=y
+# CONFIG_MMC_WBSD is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="cp437"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_WAITQ is not set
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig
new file mode 100644
index 0000000..900e04f
--- /dev/null
+++ b/arch/arm/configs/spitz_defconfig
@@ -0,0 +1,1401 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14-rc3
+# Sun Oct  9 17:11:19 2005
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_CAMELOT is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_L7200 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
+
+#
+# Intel PXA2xx Implementations
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+CONFIG_PXA_SHARPSL=y
+# CONFIG_PXA_SHARPSL_25x is not set
+CONFIG_PXA_SHARPSL_27x=y
+CONFIG_MACH_SPITZ=y
+CONFIG_MACH_BORZOI=y
+CONFIG_PXA27x=y
+CONFIG_PXA_SHARP_Cxx00=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+CONFIG_XSCALE_PMU=y
+CONFIG_SHARP_PARAM=y
+CONFIG_SHARP_SCOOP=y
+
+#
+# Bus support
+#
+CONFIG_ISA_DMA_API=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+
+#
+# PC-card bridges
+#
+CONFIG_PCMCIA_PXA2XX=y
+
+#
+# Kernel Features
+#
+CONFIG_PREEMPT=y
+# CONFIG_NO_IDLE_HZ is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2   debug"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_APM=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_NETLINK is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+# CONFIG_IP_NF_CT_ACCT is not set
+# CONFIG_IP_NF_CONNTRACK_MARK is not set
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+CONFIG_IP_NF_CT_PROTO_SCTP=m
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_LIMIT=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_MAC=m
+CONFIG_IP_NF_MATCH_PKTTYPE=m
+CONFIG_IP_NF_MATCH_MARK=m
+CONFIG_IP_NF_MATCH_MULTIPORT=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_DSCP=m
+CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_TCPMSS=m
+CONFIG_IP_NF_MATCH_HELPER=m
+CONFIG_IP_NF_MATCH_STATE=m
+CONFIG_IP_NF_MATCH_CONNTRACK=m
+CONFIG_IP_NF_MATCH_OWNER=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_REALM=m
+CONFIG_IP_NF_MATCH_SCTP=m
+# CONFIG_IP_NF_MATCH_DCCP is not set
+CONFIG_IP_NF_MATCH_COMMENT=m
+CONFIG_IP_NF_MATCH_HASHLIMIT=m
+# CONFIG_IP_NF_MATCH_STRING is not set
+CONFIG_IP_NF_FILTER=m
+# CONFIG_IP_NF_TARGET_REJECT is not set
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=m
+# CONFIG_IP_NF_TARGET_NFQUEUE is not set
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_NAT_NEEDED=y
+# CONFIG_IP_NF_TARGET_MASQUERADE is not set
+# CONFIG_IP_NF_TARGET_REDIRECT is not set
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_SAME is not set
+# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
+CONFIG_IP_NF_NAT_IRC=m
+CONFIG_IP_NF_NAT_FTP=m
+CONFIG_IP_NF_NAT_TFTP=m
+CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_MANGLE=m
+# CONFIG_IP_NF_TARGET_TOS is not set
+# CONFIG_IP_NF_TARGET_ECN is not set
+# CONFIG_IP_NF_TARGET_DSCP is not set
+# CONFIG_IP_NF_TARGET_MARK is not set
+# CONFIG_IP_NF_TARGET_CLASSIFY is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
+CONFIG_IP_NF_RAW=m
+# CONFIG_IP_NF_TARGET_NOTRACK is not set
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_LIMIT=m
+CONFIG_IP6_NF_MATCH_MAC=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_MULTIPORT=m
+CONFIG_IP6_NF_MATCH_OWNER=m
+CONFIG_IP6_NF_MATCH_MARK=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AHESP=m
+CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+# CONFIG_IP6_NF_TARGET_LOG is not set
+# CONFIG_IP6_NF_TARGET_REJECT is not set
+# CONFIG_IP6_NF_TARGET_NFQUEUE is not set
+CONFIG_IP6_NF_MANGLE=m
+# CONFIG_IP6_NF_TARGET_MARK is not set
+# CONFIG_IP6_NF_TARGET_HL is not set
+CONFIG_IP6_NF_RAW=m
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+# CONFIG_IRDA_CACHE_LAST_LSAP is not set
+# CONFIG_IRDA_FAST_RR is not set
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+# CONFIG_IRTTY_SIR is not set
+
+#
+# Dongle support
+#
+
+#
+# Old SIR device drivers
+#
+# CONFIG_IRPORT_SIR is not set
+
+#
+# Old Serial dongle support
+#
+
+#
+# FIR device drivers
+#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
+# CONFIG_NSC_FIR is not set
+# CONFIG_WINBOND_FIR is not set
+# CONFIG_SMC_IRCC_FIR is not set
+# CONFIG_ALI_FIR is not set
+# CONFIG_VIA_FIR is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUSB=m
+# CONFIG_BT_HCIUSB_SCO is not set
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_BCSP_TXCRC=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIDTL1=m
+CONFIG_BT_HCIBT3C=m
+CONFIG_BT_HCIBLUECARD=m
+CONFIG_BT_HCIBTUART=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+# CONFIG_IEEE80211_CRYPT_CCMP is not set
+# CONFIG_IEEE80211_CRYPT_TKIP is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+CONFIG_MTD_ROM=y
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_SHARP_SL=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_H1900 is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_SHARPSL=y
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECS=y
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# PCMCIA SCSI adapter support
+#
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+# CONFIG_PCMCIA_WAVELAN is not set
+# CONFIG_PCMCIA_NETWAVE is not set
+
+#
+# Wireless 802.11 Frequency Hopping cards support
+#
+# CONFIG_PCMCIA_RAYCS is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+CONFIG_HERMES=m
+# CONFIG_ATMEL is not set
+
+#
+# Wireless 802.11b Pcmcia/Cardbus cards support
+#
+CONFIG_PCMCIA_HERMES=m
+CONFIG_PCMCIA_SPECTRUM=m
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_CS=m
+CONFIG_NET_WIRELESS=y
+
+#
+# PCMCIA network device support
+#
+CONFIG_NET_PCMCIA=y
+# CONFIG_PCMCIA_3C589 is not set
+# CONFIG_PCMCIA_3C574 is not set
+# CONFIG_PCMCIA_FMVJ18X is not set
+CONFIG_PCMCIA_PCNET=m
+# CONFIG_PCMCIA_NMCLAN is not set
+# CONFIG_PCMCIA_SMC91C92 is not set
+# CONFIG_PCMCIA_XIRC2PS is not set
+# CONFIG_PCMCIA_AXNET is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPPOE is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_CORGI is not set
+CONFIG_KEYBOARD_SPITZ=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_CORGI=y
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_UINPUT=m
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=m
+CONFIG_SERIAL_8250_CS=m
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_NVRAM is not set
+# CONFIG_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_W100 is not set
+# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_DEVICE=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_DEVICE=y
+CONFIG_BACKLIGHT_CORGI=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_SL811_HCD=m
+CONFIG_USB_SL811_CS=m
+
+#
+# USB Device Class drivers
+#
+
+#
+# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+CONFIG_USB_HIDINPUT=y
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+CONFIG_USB_KBD=m
+CONFIG_USB_MOUSE=m
+CONFIG_USB_AIPTEK=m
+CONFIG_USB_WACOM=m
+# CONFIG_USB_ACECAD is not set
+CONFIG_USB_KBTAB=m
+CONFIG_USB_POWERMATE=m
+CONFIG_USB_MTOUCH=m
+# CONFIG_USB_ITMTOUCH is not set
+CONFIG_USB_EGALAX=m
+# CONFIG_USB_YEALINK is not set
+CONFIG_USB_XPAD=m
+CONFIG_USB_ATI_REMOTE=m
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+
+#
+# USB Multimedia devices
+#
+CONFIG_USB_DABUSB=m
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=m
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+CONFIG_USB_NET_ZAURUS=m
+# CONFIG_USB_ZD1201 is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+CONFIG_USB_SERIAL_BELKIN=m
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+# CONFIG_USB_SERIAL_CP2101 is not set
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_HP4X is not set
+CONFIG_USB_SERIAL_SAFE=m
+# CONFIG_USB_SERIAL_SAFE_PADDED is not set
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+# CONFIG_USB_SERIAL_OPTION is not set
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_EZUSB=y
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_AUERSWALD=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_LED=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_PHIDGETKIT=m
+CONFIG_USB_PHIDGETSERVO=m
+CONFIG_USB_IDMOUSE=m
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+CONFIG_USB_GADGET_DUMMY_HCD=y
+CONFIG_USB_DUMMY_HCD=m
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+
+#
+# MMC/SD Card support
+#
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_PXA=y
+# CONFIG_MMC_WBSD is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_SMB_NLS_REMOTE="cp437"
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="cp437"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+
+#
+# Profiling support
+#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_WAITQ is not set
+CONFIG_DEBUG_ERRORS=y
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c
index 835d450..7b17a87 100644
--- a/arch/arm/kernel/armksyms.c
+++ b/arch/arm/kernel/armksyms.c
@@ -45,8 +45,8 @@ extern void fp_enter(void);
 
 #define EXPORT_SYMBOL_ALIAS(sym,orig)		\
  EXPORT_CRC_ALIAS(sym)				\
- const struct kernel_symbol __ksymtab_##sym	\
-  __attribute__((section("__ksymtab"))) =	\
+ static const struct kernel_symbol __ksymtab_##sym	\
+  __attribute_used__ __attribute__((section("__ksymtab"))) =	\
     { (unsigned long)&orig, #sym };
 
 /*
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 81d450a..066597f 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -106,15 +106,10 @@ ENTRY(ret_from_fork)
 	.endm
 
 .Larm700bug:
-	ldr	r0, [sp, #S_PSR]		@ Get calling cpsr
-	sub	lr, lr, #4
-	str	lr, [r8]
-	msr	spsr_cxsf, r0
 	ldmia	sp, {r0 - lr}^			@ Get calling r0 - lr
 	mov	r0, r0
-	ldr	lr, [sp, #S_PC]			@ Get PC
 	add	sp, sp, #S_FRAME_SIZE
-	movs	pc, lr
+	subs	pc, lr, #4
 #else
 	.macro	arm710_bug_check, instr, temp
 	.endm
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index be37586..60c8b9d 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -36,6 +36,7 @@
 #include <asm/arch/mmc.h>
 #include <asm/arch/udc.h>
 #include <asm/arch/corgi.h>
+#include <asm/arch/sharpsl.h>
 
 #include <asm/mach/sharpsl_param.h>
 #include <asm/hardware/scoop.h>
diff --git a/arch/arm/mach-s3c2410/mach-anubis.c b/arch/arm/mach-s3c2410/mach-anubis.c
index 7c05f27..5ae80f4 100644
--- a/arch/arm/mach-s3c2410/mach-anubis.c
+++ b/arch/arm/mach-s3c2410/mach-anubis.c
@@ -125,7 +125,7 @@ static int external_map[]   = { 2 };
 static int chip0_map[]      = { 0 };
 static int chip1_map[]      = { 1 };
 
-struct mtd_partition anubis_default_nand_part[] = {
+static struct mtd_partition anubis_default_nand_part[] = {
 	[0] = {
 		.name	= "Boot Agent",
 		.size	= SZ_16K,
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index ed1f07d..8ca9559 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -230,7 +230,7 @@ static int chip0_map[] = { 1 };
 static int chip1_map[] = { 2 };
 static int chip2_map[] = { 3 };
 
-struct mtd_partition bast_default_nand_part[] = {
+static struct mtd_partition bast_default_nand_part[] = {
 	[0] = {
 		.name	= "Boot Agent",
 		.size	= SZ_16K,
@@ -340,7 +340,7 @@ static struct resource bast_dm9k_resource[] = {
  * better IO routines can be written and tested
 */
 
-struct dm9000_plat_data bast_dm9k_platdata = {
+static struct dm9000_plat_data bast_dm9k_platdata = {
 	.flags		= DM9000_PLATF_16BITONLY
 };
 
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 663a7f9..46b2596 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -288,7 +288,7 @@ static struct resource vr1000_dm9k1_resource[] = {
  * better IO routines can be written and tested
 */
 
-struct dm9000_plat_data vr1000_dm9k_platdata = {
+static struct dm9000_plat_data vr1000_dm9k_platdata = {
 	.flags		= DM9000_PLATF_16BITONLY,
 };
 
diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c
index 0b88993..a8bf5ec 100644
--- a/arch/arm/mach-s3c2410/s3c2410.c
+++ b/arch/arm/mach-s3c2410/s3c2410.c
@@ -125,9 +125,6 @@ static struct platform_device *uart_devices[] __initdata = {
 	&s3c_uart2
 };
 
-/* store our uart devices for the serial driver console */
-struct platform_device *s3c2410_uart_devices[3];
-
 static int s3c2410_uart_count = 0;
 
 /* uart registration process */
diff --git a/arch/arm/mach-s3c2410/s3c2440.c b/arch/arm/mach-s3c2410/s3c2440.c
index d4c8281..833fa36 100644
--- a/arch/arm/mach-s3c2410/s3c2440.c
+++ b/arch/arm/mach-s3c2410/s3c2440.c
@@ -151,7 +151,7 @@ void __init s3c2440_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 
 #ifdef CONFIG_PM
 
-struct sleep_save s3c2440_sleep[] = {
+static struct sleep_save s3c2440_sleep[] = {
 	SAVE_ITEM(S3C2440_DSC0),
 	SAVE_ITEM(S3C2440_DSC1),
 	SAVE_ITEM(S3C2440_GPJDAT),
@@ -260,7 +260,7 @@ void __init s3c2440_init_clocks(int xtal)
  * as a driver which may support both 2410 and 2440 may try and use it.
 */
 
-int __init s3c2440_core_init(void)
+static int __init s3c2440_core_init(void)
 {
 	return sysdev_class_register(&s3c2440_sysclass);
 }
diff --git a/arch/arm/mach-s3c2410/time.c b/arch/arm/mach-s3c2410/time.c
index c0acfb2..8a00e3c 100644
--- a/arch/arm/mach-s3c2410/time.c
+++ b/arch/arm/mach-s3c2410/time.c
@@ -38,6 +38,7 @@
 #include <asm/hardware/clock.h>
 
 #include "clock.h"
+#include "cpu.h"
 
 static unsigned long timer_startval;
 static unsigned long timer_usec_ticks;
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index 25d6a4e..6ecab7e 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -111,11 +111,11 @@ static struct mtd_partition collie_partitions[] = {
 
 static void collie_set_vpp(int vpp)
 {
-	write_scoop_reg(&colliescoop_device.dev, SCOOP_GPCR, read_scoop_reg(SCOOP_GPCR) | COLLIE_SCP_VPEN);
+	write_scoop_reg(&colliescoop_device.dev, SCOOP_GPCR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPCR) | COLLIE_SCP_VPEN);
 	if (vpp)
-		write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(SCOOP_GPWR) | COLLIE_SCP_VPEN);
+		write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR) | COLLIE_SCP_VPEN);
 	else
-		write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(SCOOP_GPWR) & ~COLLIE_SCP_VPEN);
+		write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR) & ~COLLIE_SCP_VPEN);
 }
 
 static struct flash_platform_data collie_flash_data = {
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index db5e47d..c54e04c 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -370,21 +370,21 @@ config CPU_BIG_ENDIAN
 
 config CPU_ICACHE_DISABLE
 	bool "Disable I-Cache"
-	depends on CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020
+	depends on CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 || CPU_V6
 	help
 	  Say Y here to disable the processor instruction cache. Unless
 	  you have a reason not to or are unsure, say N.
 
 config CPU_DCACHE_DISABLE
 	bool "Disable D-Cache"
-	depends on CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020
+	depends on CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 || CPU_V6
 	help
 	  Say Y here to disable the processor data cache. Unless
 	  you have a reason not to or are unsure, say N.
 
 config CPU_DCACHE_WRITETHROUGH
 	bool "Force write through D-cache"
-	depends on (CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020) && !CPU_DCACHE_DISABLE
+	depends on (CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 || CPU_V6) && !CPU_DCACHE_DISABLE
 	default y if CPU_ARM925T
 	help
 	  Say Y here to use the data cache in writethrough mode. Unless you
@@ -399,7 +399,7 @@ config CPU_CACHE_ROUND_ROBIN
 
 config CPU_BPREDICT_DISABLE
 	bool "Disable branch prediction"
-	depends on CPU_ARM1020
+	depends on CPU_ARM1020 || CPU_V6
 	help
 	  Say Y here to disable branch prediction.  If unsure, say N.
 
diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
index 4b39d86..705c989 100644
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -111,7 +111,7 @@ proc_alignment_read(char *page, char **start, off_t off, int count, int *eof,
 }
 
 static int proc_alignment_write(struct file *file, const char __user *buffer,
-			       unsigned long count, void *data)
+				unsigned long count, void *data)
 {
 	char mode;
 
@@ -119,7 +119,7 @@ static int proc_alignment_write(struct file *file, const char __user *buffer,
 		if (get_user(mode, buffer))
 			return -EFAULT;
 		if (mode >= '0' && mode <= '5')
-			   ai_usermode = mode - '0';
+			ai_usermode = mode - '0';
 	}
 	return count;
 }
@@ -262,7 +262,7 @@ union offset_union {
 			goto fault;				\
 	} while (0)
 
-#define put32_unaligned_check(val,addr)	 \
+#define put32_unaligned_check(val,addr) \
 	__put32_unaligned_check("strb", val, addr)
 
 #define put32t_unaligned_check(val,addr) \
@@ -306,19 +306,19 @@ do_alignment_ldrhstrh(unsigned long addr, unsigned long instr, struct pt_regs *r
 	return TYPE_LDST;
 
  user:
- 	if (LDST_L_BIT(instr)) {
- 		unsigned long val;
- 		get16t_unaligned_check(val, addr);
+	if (LDST_L_BIT(instr)) {
+		unsigned long val;
+		get16t_unaligned_check(val, addr);
 
- 		/* signed half-word? */
- 		if (instr & 0x40)
- 			val = (signed long)((signed short) val);
+		/* signed half-word? */
+		if (instr & 0x40)
+			val = (signed long)((signed short) val);
 
- 		regs->uregs[rd] = val;
- 	} else
- 		put16t_unaligned_check(regs->uregs[rd], addr);
+		regs->uregs[rd] = val;
+	} else
+		put16t_unaligned_check(regs->uregs[rd], addr);
 
- 	return TYPE_LDST;
+	return TYPE_LDST;
 
  fault:
 	return TYPE_FAULT;
@@ -330,6 +330,9 @@ do_alignment_ldrdstrd(unsigned long addr, unsigned long instr,
 {
 	unsigned int rd = RD_BITS(instr);
 
+	if (((rd & 1) == 1) || (rd == 14))
+		goto bad;
+
 	ai_dword += 1;
 
 	if (user_mode(regs))
@@ -339,11 +342,11 @@ do_alignment_ldrdstrd(unsigned long addr, unsigned long instr,
 		unsigned long val;
 		get32_unaligned_check(val, addr);
 		regs->uregs[rd] = val;
-		get32_unaligned_check(val, addr+4);
-		regs->uregs[rd+1] = val;
+		get32_unaligned_check(val, addr + 4);
+		regs->uregs[rd + 1] = val;
 	} else {
 		put32_unaligned_check(regs->uregs[rd], addr);
-		put32_unaligned_check(regs->uregs[rd+1], addr+4);
+		put32_unaligned_check(regs->uregs[rd + 1], addr + 4);
 	}
 
 	return TYPE_LDST;
@@ -353,15 +356,16 @@ do_alignment_ldrdstrd(unsigned long addr, unsigned long instr,
 		unsigned long val;
 		get32t_unaligned_check(val, addr);
 		regs->uregs[rd] = val;
-		get32t_unaligned_check(val, addr+4);
-		regs->uregs[rd+1] = val;
+		get32t_unaligned_check(val, addr + 4);
+		regs->uregs[rd + 1] = val;
 	} else {
 		put32t_unaligned_check(regs->uregs[rd], addr);
-		put32t_unaligned_check(regs->uregs[rd+1], addr+4);
+		put32t_unaligned_check(regs->uregs[rd + 1], addr + 4);
 	}
 
 	return TYPE_LDST;
-
+ bad:
+	return TYPE_ERROR;
  fault:
 	return TYPE_FAULT;
 }
@@ -439,7 +443,7 @@ do_alignment_ldmstm(unsigned long addr, unsigned long instr, struct pt_regs *reg
 	if (LDST_P_EQ_U(instr))	/* U = P */
 		eaddr += 4;
 
-	/* 
+	/*
 	 * For alignment faults on the ARM922T/ARM920T the MMU  makes
 	 * the FSR (and hence addr) equal to the updated base address
 	 * of the multiple access rather than the restored value.
@@ -566,7 +570,7 @@ thumb2arm(u16 tinstr)
 	/* 6.5.1 Format 3: */
 	case 0x4800 >> 11:				/* 7.1.28 LDR(3) */
 		/* NOTE: This case is not technically possible. We're
-		 * 	 loading 32-bit memory data via PC relative
+		 *	 loading 32-bit memory data via PC relative
 		 *	 addressing mode. So we can and should eliminate
 		 *	 this case. But I'll leave it here for now.
 		 */
@@ -638,7 +642,7 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 
 	if (fault) {
 		type = TYPE_FAULT;
- 		goto bad_or_fault;
+		goto bad_or_fault;
 	}
 
 	if (user_mode(regs))
@@ -663,6 +667,8 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 		else if ((instr & 0x001000f0) == 0x000000d0 || /* LDRD */
 			 (instr & 0x001000f0) == 0x000000f0)   /* STRD */
 			handler = do_alignment_ldrdstrd;
+		else if ((instr & 0x01f00ff0) == 0x01000090) /* SWP */
+			goto swp;
 		else
 			goto bad;
 		break;
@@ -733,6 +739,9 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	do_bad_area(current, current->mm, addr, fsr, regs);
 	return 0;
 
+ swp:
+	printk(KERN_ERR "Alignment trap: not handling swp instruction\n");
+
  bad:
 	/*
 	 * Oops, we didn't handle the instruction.
diff --git a/arch/arm/nwfpe/fpa11.c b/arch/arm/nwfpe/fpa11.c
index 7690f73..7b3d74d 100644
--- a/arch/arm/nwfpe/fpa11.c
+++ b/arch/arm/nwfpe/fpa11.c
@@ -31,11 +31,6 @@
 #include <linux/string.h>
 #include <asm/system.h>
 
-/* forward declarations */
-unsigned int EmulateCPDO(const unsigned int);
-unsigned int EmulateCPDT(const unsigned int);
-unsigned int EmulateCPRT(const unsigned int);
-
 /* Reset the FPA11 chip.  Called to initialize and reset the emulator. */
 static void resetFPA11(void)
 {
diff --git a/arch/arm/nwfpe/fpa11.h b/arch/arm/nwfpe/fpa11.h
index 93523ae..9677ae8 100644
--- a/arch/arm/nwfpe/fpa11.h
+++ b/arch/arm/nwfpe/fpa11.h
@@ -95,4 +95,24 @@ extern int8 SetRoundingMode(const unsigned int);
 extern int8 SetRoundingPrecision(const unsigned int);
 extern void nwfpe_init_fpa(union fp_state *fp);
 
+extern unsigned int EmulateAll(unsigned int opcode);
+
+extern unsigned int EmulateCPDT(const unsigned int opcode);
+extern unsigned int EmulateCPDO(const unsigned int opcode);
+extern unsigned int EmulateCPRT(const unsigned int opcode);
+
+/* fpa11_cpdt.c */
+extern unsigned int PerformLDF(const unsigned int opcode);
+extern unsigned int PerformSTF(const unsigned int opcode);
+extern unsigned int PerformLFM(const unsigned int opcode);
+extern unsigned int PerformSFM(const unsigned int opcode);
+
+/* single_cpdo.c */
+
+extern unsigned int SingleCPDO(struct roundingData *roundData,
+			       const unsigned int opcode, FPREG * rFd);
+/* double_cpdo.c */
+extern unsigned int DoubleCPDO(struct roundingData *roundData,
+			       const unsigned int opcode, FPREG * rFd);
+
 #endif
diff --git a/arch/arm/nwfpe/fpa11_cprt.c b/arch/arm/nwfpe/fpa11_cprt.c
index adf8d30..7c67023 100644
--- a/arch/arm/nwfpe/fpa11_cprt.c
+++ b/arch/arm/nwfpe/fpa11_cprt.c
@@ -26,12 +26,11 @@
 #include "fpa11.inl"
 #include "fpmodule.h"
 #include "fpmodule.inl"
+#include "softfloat.h"
 
 #ifdef CONFIG_FPE_NWFPE_XP
 extern flag floatx80_is_nan(floatx80);
 #endif
-extern flag float64_is_nan(float64);
-extern flag float32_is_nan(float32);
 
 unsigned int PerformFLT(const unsigned int opcode);
 unsigned int PerformFIX(const unsigned int opcode);
diff --git a/arch/arm/nwfpe/fpopcode.h b/arch/arm/nwfpe/fpopcode.h
index 1777e92..6528e08 100644
--- a/arch/arm/nwfpe/fpopcode.h
+++ b/arch/arm/nwfpe/fpopcode.h
@@ -476,4 +476,10 @@ static inline unsigned int getDestinationSize(const unsigned int opcode)
 	return (nRc);
 }
 
+extern unsigned int checkCondition(const unsigned int opcode,
+				   const unsigned int ccodes);
+
+extern const float64 float64Constant[];
+extern const float32 float32Constant[];
+
 #endif
diff --git a/arch/arm/nwfpe/softfloat.h b/arch/arm/nwfpe/softfloat.h
index 1c8799b..1415170 100644
--- a/arch/arm/nwfpe/softfloat.h
+++ b/arch/arm/nwfpe/softfloat.h
@@ -265,4 +265,7 @@ static inline flag float64_lt_nocheck(float64 a, float64 b)
 	return (a != b) && (aSign ^ (a < b));
 }
 
+extern flag float32_is_nan( float32 a );
+extern flag float64_is_nan( float64 a );
+
 #endif
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 6d3a79e..ae7c64b 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -2,11 +2,17 @@
 #
 # This file is linux/arch/arm/tools/mach-types
 #
+# Up to date versions of this file can be obtained from:
+#
+#   http://www.arm.linux.org.uk/developer/machines/?action=download
+#
 # Please do not send patches to this file; it is automatically generated!
 # To add an entry into this database, please see Documentation/arm/README,
-# or contact rmk@arm.linux.org.uk
+# or visit:
+#
+#   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Thu Jun 23 20:19:33 2005
+# Last update: Mon Oct 10 09:46:25 2005
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -421,7 +427,7 @@ mt02			MACH_MT02		MT02			410
 mport3s			MACH_MPORT3S		MPORT3S			411
 ra_alpha		MACH_RA_ALPHA		RA_ALPHA		412
 xcep			MACH_XCEP		XCEP			413
-arcom_mercury		MACH_ARCOM_MERCURY	ARCOM_MERCURY		414
+arcom_vulcan		MACH_ARCOM_VULCAN	ARCOM_VULCAN		414
 stargate		MACH_STARGATE		STARGATE		415
 armadilloj		MACH_ARMADILLOJ		ARMADILLOJ		416
 elroy_jack		MACH_ELROY_JACK		ELROY_JACK		417
@@ -454,7 +460,7 @@ esl_sarva		MACH_ESL_SARVA		ESL_SARVA		443
 xm250			MACH_XM250		XM250			444
 t6tc1xb			MACH_T6TC1XB		T6TC1XB			445
 ess710			MACH_ESS710		ESS710			446
-mx3ads			MACH_MX3ADS		MX3ADS			447
+mx31ads			MACH_MX3ADS		MX3ADS			447
 himalaya		MACH_HIMALAYA		HIMALAYA		448
 bolfenk			MACH_BOLFENK		BOLFENK			449
 at91rm9200kr		MACH_AT91RM9200KR	AT91RM9200KR		450
@@ -787,3 +793,79 @@ ez_ixp42x		MACH_EZ_IXP42X		EZ_IXP42X		778
 tapwave_zodiac		MACH_TAPWAVE_ZODIAC	TAPWAVE_ZODIAC		779
 universalmeter		MACH_UNIVERSALMETER	UNIVERSALMETER		780
 hicoarm9		MACH_HICOARM9		HICOARM9		781
+pnx4008			MACH_PNX4008		PNX4008			782
+kws6000			MACH_KWS6000		KWS6000			783
+portux920t		MACH_PORTUX920T		PORTUX920T		784
+ez_x5			MACH_EZ_X5		EZ_X5			785
+omap_rudolph		MACH_OMAP_RUDOLPH	OMAP_RUDOLPH		786
+cpuat91			MACH_CPUAT91		CPUAT91			787
+rea9200			MACH_REA9200		REA9200			788
+acts_pune_sa1110	MACH_ACTS_PUNE_SA1110	ACTS_PUNE_SA1110	789
+ixp425			MACH_IXP425		IXP425			790
+argonplusodyssey	MACH_ODYSSEY		ODYSSEY			791
+perch			MACH_PERCH		PERCH			792
+eis05r1			MACH_EIS05R1		EIS05R1			793
+pepperpad		MACH_PEPPERPAD		PEPPERPAD		794
+sb3010			MACH_SB3010		SB3010			795
+rm9200			MACH_RM9200		RM9200			796
+dma03			MACH_DMA03		DMA03			797
+road_s101		MACH_ROAD_S101		ROAD_S101		798
+iq_nextgen_a		MACH_IQ_NEXTGEN_A	IQ_NEXTGEN_A		799
+iq_nextgen_b		MACH_IQ_NEXTGEN_B	IQ_NEXTGEN_B		800
+iq_nextgen_c		MACH_IQ_NEXTGEN_C	IQ_NEXTGEN_C		801
+iq_nextgen_d		MACH_IQ_NEXTGEN_D	IQ_NEXTGEN_D		802
+iq_nextgen_e		MACH_IQ_NEXTGEN_E	IQ_NEXTGEN_E		803
+mallow_at91		MACH_MALLOW_AT91	MALLOW_AT91		804
+cybertracker		MACH_CYBERTRACKER	CYBERTRACKER		805
+gesbc931x		MACH_GESBC931X		GESBC931X		806
+centipad		MACH_CENTIPAD		CENTIPAD		807
+armsoc			MACH_ARMSOC		ARMSOC			808
+se4200			MACH_SE4200		SE4200			809
+ems197a			MACH_EMS197A		EMS197A			810
+micro9			MACH_MICRO9		MICRO9			811
+micro9l			MACH_MICRO9L		MICRO9L			812
+uc5471dsp		MACH_UC5471DSP		UC5471DSP		813
+sj5471eng		MACH_SJ5471ENG		SJ5471ENG		814
+none			MACH_CMPXA26X		CMPXA26X		815
+nc			MACH_NC			NC			816
+omap_palmte		MACH_OMAP_PALMTE	OMAP_PALMTE		817
+ajax52x			MACH_AJAX52X		AJAX52X			818
+siriustar		MACH_SIRIUSTAR		SIRIUSTAR		819
+iodata_hdlg		MACH_IODATA_HDLG	IODATA_HDLG		820
+at91rm9200utl		MACH_AT91RM9200UTL	AT91RM9200UTL		821
+biosafe			MACH_BIOSAFE		BIOSAFE			822
+mp1000			MACH_MP1000		MP1000			823
+parsy			MACH_PARSY		PARSY			824
+ccxp270			MACH_CCXP		CCXP			825
+omap_gsample		MACH_OMAP_GSAMPLE	OMAP_GSAMPLE		826
+realview_eb		MACH_REALVIEW_EB	REALVIEW_EB		827
+samoa			MACH_SAMOA		SAMOA			828
+t3xscale		MACH_T3XSCALE		T3XSCALE		829
+i878			MACH_I878		I878			830
+borzoi			MACH_BORZOI		BORZOI			831
+gecko			MACH_GECKO		GECKO			832
+ds101			MACH_DS101		DS101			833
+omap_palmtt2		MACH_OMAP_PALMTT2	OMAP_PALMTT2		834
+xscale_palmld		MACH_XSCALE_PALMLD	XSCALE_PALMLD		835
+cc9c			MACH_CC9C		CC9C			836
+sbc1670			MACH_SBC1670		SBC1670			837
+ixdp28x5		MACH_IXDP28X5		IXDP28X5		838
+omap_palmtt		MACH_OMAP_PALMTT	OMAP_PALMTT		839
+ml696k			MACH_ML696K		ML696K			840
+arcom_zeus		MACH_ARCOM_ZEUS		ARCOM_ZEUS		841
+osiris			MACH_OSIRIS		OSIRIS			842
+maestro			MACH_MAESTRO		MAESTRO			843
+tunge2			MACH_TUNGE2		TUNGE2			844
+ixbbm			MACH_IXBBM		IXBBM			845
+mx27			MACH_MX27		MX27			846
+ax8004			MACH_AX8004		AX8004			847
+at91sam9261ek		MACH_AT91SAM9261EK	AT91SAM9261EK		848
+loft			MACH_LOFT		LOFT			849
+magpie			MACH_MAGPIE		MAGPIE			850
+mx21			MACH_MX21		MX21			851
+mb87m3400		MACH_MB87M3400		MB87M3400		852
+mguard_delta		MACH_MGUARD_DELTA	MGUARD_DELTA		853
+davinci_dvdp		MACH_DAVINCI_DVDP	DAVINCI_DVDP		854
+htcuniversal		MACH_HTCUNIVERSAL	HTCUNIVERSAL		855
+tpad			MACH_TPAD		TPAD			856
+roverp3			MACH_ROVERP3		ROVERP3			857
diff --git a/arch/cris/arch-v32/drivers/pci/dma.c b/arch/cris/arch-v32/drivers/pci/dma.c
index 1032930..426b098 100644
--- a/arch/cris/arch-v32/drivers/pci/dma.c
+++ b/arch/cris/arch-v32/drivers/pci/dma.c
@@ -24,7 +24,7 @@ struct dma_coherent_mem {
 };
 
 void *dma_alloc_coherent(struct device *dev, size_t size,
-			   dma_addr_t *dma_handle, unsigned int __nocast gfp)
+			   dma_addr_t *dma_handle, gfp_t gfp)
 {
 	void *ret;
 	struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;
diff --git a/arch/cris/arch-v32/kernel/smp.c b/arch/cris/arch-v32/kernel/smp.c
index 2c5cae0..957f551 100644
--- a/arch/cris/arch-v32/kernel/smp.c
+++ b/arch/cris/arch-v32/kernel/smp.c
@@ -15,6 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/cpumask.h>
 #include <linux/interrupt.h>
+#include <linux/module.h>
 
 #define IPI_SCHEDULE 1
 #define IPI_CALL 2
@@ -28,6 +29,7 @@ spinlock_t cris_atomic_locks[] = { [0 ... LOCK_COUNT - 1] = SPIN_LOCK_UNLOCKED};
 /* CPU masks */
 cpumask_t cpu_online_map = CPU_MASK_NONE;
 cpumask_t phys_cpu_present_map = CPU_MASK_NONE;
+EXPORT_SYMBOL(phys_cpu_present_map);
 
 /* Variables used during SMP boot */
 volatile int cpu_now_booting = 0;
diff --git a/arch/i386/kernel/cpu/amd.c b/arch/i386/kernel/cpu/amd.c
index 4c1ddf2b..53a1681 100644
--- a/arch/i386/kernel/cpu/amd.c
+++ b/arch/i386/kernel/cpu/amd.c
@@ -29,7 +29,7 @@ static void __init init_amd(struct cpuinfo_x86 *c)
 	int r;
 
 #ifdef CONFIG_SMP
-	unsigned long value;
+	unsigned long long value;
 
 	/* Disable TLB flush filter by setting HWCR.FFDIS on K8
 	 * bit 6 of msr C001_0015
diff --git a/arch/i386/kernel/pci-dma.c b/arch/i386/kernel/pci-dma.c
index 1e51427..25fe668 100644
--- a/arch/i386/kernel/pci-dma.c
+++ b/arch/i386/kernel/pci-dma.c
@@ -23,7 +23,7 @@ struct dma_coherent_mem {
 };
 
 void *dma_alloc_coherent(struct device *dev, size_t size,
-			   dma_addr_t *dma_handle, unsigned int __nocast gfp)
+			   dma_addr_t *dma_handle, gfp_t gfp)
 {
 	void *ret;
 	struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;
diff --git a/arch/i386/kernel/signal.c b/arch/i386/kernel/signal.c
index 61eb0c8..adcd069 100644
--- a/arch/i386/kernel/signal.c
+++ b/arch/i386/kernel/signal.c
@@ -338,7 +338,11 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size)
 		esp = (unsigned long) ka->sa.sa_restorer;
 	}
 
-	return (void __user *)((esp - frame_size) & -8ul);
+	esp -= frame_size;
+	/* Align the stack pointer according to the i386 ABI,
+	 * i.e. so that on function entry ((sp + 4) & 15) == 0. */
+	esp = ((esp + 4) & -16ul) - 4;
+	return (void __user *) esp;
 }
 
 /* These symbols are defined with the addresses in the vsyscall page.
diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c
index 6dc726a..d0a5106 100644
--- a/arch/ia64/kernel/mca.c
+++ b/arch/ia64/kernel/mca.c
@@ -1016,6 +1016,11 @@ ia64_mca_cmc_int_handler(int cmc_irq, void *arg, struct pt_regs *ptregs)
 
 			cmc_polling_enabled = 1;
 			spin_unlock(&cmc_history_lock);
+			/* If we're being hit with CMC interrupts, we won't
+			 * ever execute the schedule_work() below.  Need to
+			 * disable CMC interrupts on this processor now.
+			 */
+			ia64_mca_cmc_vector_disable(NULL);
 			schedule_work(&cmc_disable_work);
 
 			/*
diff --git a/arch/m32r/kernel/entry.S b/arch/m32r/kernel/entry.S
index dddbf6b..85920fb 100644
--- a/arch/m32r/kernel/entry.S
+++ b/arch/m32r/kernel/entry.S
@@ -681,6 +681,15 @@ ENTRY(debug_trap)
 	bl	do_debug_trap
 	bra	error_code
 
+ENTRY(ill_trap)
+	/* void ill_trap(void) */
+	SWITCH_TO_KERNEL_STACK
+	SAVE_ALL
+	ldi	r1, #0				; error_code ; FIXME
+	mv	r0, sp				; pt_regs
+	bl	do_ill_trap
+	bra	error_code
+
 
 /* Cache flushing handler */
 ENTRY(cache_flushing_handler)
diff --git a/arch/m32r/kernel/traps.c b/arch/m32r/kernel/traps.c
index 0192227..5fe8ed6 100644
--- a/arch/m32r/kernel/traps.c
+++ b/arch/m32r/kernel/traps.c
@@ -5,8 +5,6 @@
  *                            Hitoshi Yamamoto
  */
 
-/* $Id$ */
-
 /*
  * 'traps.c' handles hardware traps and faults after we have saved some
  * state in 'entry.S'.
@@ -35,6 +33,7 @@ asmlinkage void ei_handler(void);
 asmlinkage void rie_handler(void);
 asmlinkage void debug_trap(void);
 asmlinkage void cache_flushing_handler(void);
+asmlinkage void ill_trap(void);
 
 #ifdef CONFIG_SMP
 extern void smp_reschedule_interrupt(void);
@@ -77,22 +76,22 @@ void	set_eit_vector_entries(void)
 	eit_vector[5] = BRA_INSN(default_eit_handler, 5);
 	eit_vector[8] = BRA_INSN(rie_handler, 8);
 	eit_vector[12] = BRA_INSN(alignment_check, 12);
-	eit_vector[16] = 0xff000000UL;
+	eit_vector[16] = BRA_INSN(ill_trap, 16);
 	eit_vector[17] = BRA_INSN(debug_trap, 17);
 	eit_vector[18] = BRA_INSN(system_call, 18);
-	eit_vector[19] = 0xff000000UL;
-	eit_vector[20] = 0xff000000UL;
-	eit_vector[21] = 0xff000000UL;
-	eit_vector[22] = 0xff000000UL;
-	eit_vector[23] = 0xff000000UL;
-	eit_vector[24] = 0xff000000UL;
-	eit_vector[25] = 0xff000000UL;
-	eit_vector[26] = 0xff000000UL;
-	eit_vector[27] = 0xff000000UL;
+	eit_vector[19] = BRA_INSN(ill_trap, 19);
+	eit_vector[20] = BRA_INSN(ill_trap, 20);
+	eit_vector[21] = BRA_INSN(ill_trap, 21);
+	eit_vector[22] = BRA_INSN(ill_trap, 22);
+	eit_vector[23] = BRA_INSN(ill_trap, 23);
+	eit_vector[24] = BRA_INSN(ill_trap, 24);
+	eit_vector[25] = BRA_INSN(ill_trap, 25);
+	eit_vector[26] = BRA_INSN(ill_trap, 26);
+	eit_vector[27] = BRA_INSN(ill_trap, 27);
 	eit_vector[28] = BRA_INSN(cache_flushing_handler, 28);
-	eit_vector[29] = 0xff000000UL;
-	eit_vector[30] = 0xff000000UL;
-	eit_vector[31] = 0xff000000UL;
+	eit_vector[29] = BRA_INSN(ill_trap, 29);
+	eit_vector[30] = BRA_INSN(ill_trap, 30);
+	eit_vector[31] = BRA_INSN(ill_trap, 31);
 	eit_vector[32] = BRA_INSN(ei_handler, 32);
 	eit_vector[64] = BRA_INSN(pie_handler, 64);
 #ifdef CONFIG_MMU
@@ -286,7 +285,8 @@ asmlinkage void do_##name(struct pt_regs * regs, long error_code) \
 
 DO_ERROR( 1, SIGTRAP, "debug trap", debug_trap)
 DO_ERROR_INFO(0x20, SIGILL,  "reserved instruction ", rie_handler, ILL_ILLOPC, regs->bpc)
-DO_ERROR_INFO(0x100, SIGILL,  "privilege instruction", pie_handler, ILL_PRVOPC, regs->bpc)
+DO_ERROR_INFO(0x100, SIGILL,  "privileged instruction", pie_handler, ILL_PRVOPC, regs->bpc)
+DO_ERROR_INFO(-1, SIGILL,  "illegal trap", ill_trap, ILL_ILLTRP, regs->bpc)
 
 extern int handle_unaligned_access(unsigned long, struct pt_regs *);
 
@@ -329,4 +329,3 @@ asmlinkage void do_alignment_check(struct pt_regs *regs, long error_code)
 		set_fs(oldfs);
 	}
 }
-
diff --git a/arch/ppc/kernel/cputable.c b/arch/ppc/kernel/cputable.c
index 546e1ea..6b76cf5 100644
--- a/arch/ppc/kernel/cputable.c
+++ b/arch/ppc/kernel/cputable.c
@@ -91,7 +91,7 @@ struct cpu_spec	cpu_specs[] = {
 		.cpu_features		= CPU_FTR_COMMON | CPU_FTR_601 |
 			CPU_FTR_HPTE_TABLE,
 		.cpu_user_features 	= COMMON_PPC | PPC_FEATURE_601_INSTR |
-			PPC_FEATURE_UNIFIED_CACHE,
+			PPC_FEATURE_UNIFIED_CACHE | PPC_FEATURE_NO_TB,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.cpu_setup		= __setup_cpu_601
@@ -745,7 +745,8 @@ struct cpu_spec	cpu_specs[] = {
 		.cpu_name		= "403GCX",
 		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
 			CPU_FTR_USE_TB,
-		.cpu_user_features	= PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU,
+		.cpu_user_features	= PPC_FEATURE_32 |
+		 	PPC_FEATURE_HAS_MMU | PPC_FEATURE_NO_TB,
 		.icache_bsize		= 16,
 		.dcache_bsize		= 16,
 	},
diff --git a/arch/ppc/kernel/dma-mapping.c b/arch/ppc/kernel/dma-mapping.c
index b566d98..8edee80 100644
--- a/arch/ppc/kernel/dma-mapping.c
+++ b/arch/ppc/kernel/dma-mapping.c
@@ -401,10 +401,10 @@ EXPORT_SYMBOL(__dma_sync);
 static inline void __dma_sync_page_highmem(struct page *page,
 		unsigned long offset, size_t size, int direction)
 {
-	size_t seg_size = min((size_t)PAGE_SIZE, size) - offset;
+	size_t seg_size = min((size_t)(PAGE_SIZE - offset), size);
 	size_t cur_size = seg_size;
 	unsigned long flags, start, seg_offset = offset;
-	int nr_segs = PAGE_ALIGN(size + (PAGE_SIZE - offset))/PAGE_SIZE;
+	int nr_segs = 1 + ((size - seg_size) + PAGE_SIZE - 1)/PAGE_SIZE;
 	int seg_nr = 0;
 
 	local_irq_save(flags);
diff --git a/arch/ppc/platforms/pmac_time.c b/arch/ppc/platforms/pmac_time.c
index 778ce4f..efb819f 100644
--- a/arch/ppc/platforms/pmac_time.c
+++ b/arch/ppc/platforms/pmac_time.c
@@ -195,7 +195,7 @@ via_calibrate_decr(void)
 		;
 	dend = get_dec();
 
-	tb_ticks_per_jiffy = (dstart - dend) / (6 * (HZ/100));
+	tb_ticks_per_jiffy = (dstart - dend) / ((6 * HZ)/100);
 	tb_to_us = mulhwu_scale_factor(dstart - dend, 60000);
 
 	printk(KERN_INFO "via_calibrate_decr: ticks per jiffy = %u (%u ticks)\n",
diff --git a/arch/ppc64/kernel/bpa_iommu.c b/arch/ppc64/kernel/bpa_iommu.c
index 507eb9d..5f24600 100644
--- a/arch/ppc64/kernel/bpa_iommu.c
+++ b/arch/ppc64/kernel/bpa_iommu.c
@@ -310,7 +310,7 @@ static void bpa_map_iommu(void)
 
 
 static void *bpa_alloc_coherent(struct device *hwdev, size_t size,
-			   dma_addr_t *dma_handle, unsigned int __nocast flag)
+			   dma_addr_t *dma_handle, gfp_t flag)
 {
 	void *ret;
 
diff --git a/arch/ppc64/kernel/dma.c b/arch/ppc64/kernel/dma.c
index 4da8e31..7c34196 100644
--- a/arch/ppc64/kernel/dma.c
+++ b/arch/ppc64/kernel/dma.c
@@ -53,7 +53,7 @@ int dma_set_mask(struct device *dev, u64 dma_mask)
 EXPORT_SYMBOL(dma_set_mask);
 
 void *dma_alloc_coherent(struct device *dev, size_t size,
-		dma_addr_t *dma_handle, unsigned int __nocast flag)
+		dma_addr_t *dma_handle, gfp_t flag)
 {
 	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
 
diff --git a/arch/ppc64/kernel/iommu.c b/arch/ppc64/kernel/iommu.c
index 9032b6b..4d9b438 100644
--- a/arch/ppc64/kernel/iommu.c
+++ b/arch/ppc64/kernel/iommu.c
@@ -519,7 +519,7 @@ void iommu_unmap_single(struct iommu_table *tbl, dma_addr_t dma_handle,
  * to the dma address (mapping) of the first page.
  */
 void *iommu_alloc_coherent(struct iommu_table *tbl, size_t size,
-		dma_addr_t *dma_handle, unsigned int __nocast flag)
+		dma_addr_t *dma_handle, gfp_t flag)
 {
 	void *ret = NULL;
 	dma_addr_t mapping;
diff --git a/arch/ppc64/kernel/module.c b/arch/ppc64/kernel/module.c
index c683bf8..928b858 100644
--- a/arch/ppc64/kernel/module.c
+++ b/arch/ppc64/kernel/module.c
@@ -341,6 +341,19 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
 			*(unsigned long *)location = my_r2(sechdrs, me);
 			break;
 
+		case R_PPC64_TOC16:
+			/* Subtact TOC pointer */
+			value -= my_r2(sechdrs, me);
+			if (value + 0x8000 > 0xffff) {
+				printk("%s: bad TOC16 relocation (%lu)\n",
+				       me->name, value);
+				return -ENOEXEC;
+			}
+			*((uint16_t *) location)
+				= (*((uint16_t *) location) & ~0xffff)
+				| (value & 0xffff);
+			break;
+
 		case R_PPC64_TOC16_DS:
 			/* Subtact TOC pointer */
 			value -= my_r2(sechdrs, me);
diff --git a/arch/ppc64/kernel/pSeries_pci.c b/arch/ppc64/kernel/pSeries_pci.c
index 1f5f141..928f8fe 100644
--- a/arch/ppc64/kernel/pSeries_pci.c
+++ b/arch/ppc64/kernel/pSeries_pci.c
@@ -32,7 +32,7 @@
 
 #include "pci.h"
 
-static int __initdata s7a_workaround = -1;
+static int __devinitdata s7a_workaround = -1;
 
 #if 0
 void pcibios_name_device(struct pci_dev *dev)
@@ -60,7 +60,7 @@ void pcibios_name_device(struct pci_dev *dev)
 DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pcibios_name_device);
 #endif
 
-static void __init check_s7a(void)
+static void __devinit check_s7a(void)
 {
 	struct device_node *root;
 	char *model;
diff --git a/arch/ppc64/kernel/pci_direct_iommu.c b/arch/ppc64/kernel/pci_direct_iommu.c
index b8f7f58..54055c8 100644
--- a/arch/ppc64/kernel/pci_direct_iommu.c
+++ b/arch/ppc64/kernel/pci_direct_iommu.c
@@ -31,7 +31,7 @@
 #include "pci.h"
 
 static void *pci_direct_alloc_coherent(struct device *hwdev, size_t size,
-				   dma_addr_t *dma_handle, unsigned int __nocast flag)
+				   dma_addr_t *dma_handle, gfp_t flag)
 {
 	void *ret;
 
diff --git a/arch/ppc64/kernel/pci_iommu.c b/arch/ppc64/kernel/pci_iommu.c
index 14647e0..d9e33b7 100644
--- a/arch/ppc64/kernel/pci_iommu.c
+++ b/arch/ppc64/kernel/pci_iommu.c
@@ -76,7 +76,7 @@ static inline struct iommu_table *devnode_table(struct device *dev)
  * to the dma address (mapping) of the first page.
  */
 static void *pci_iommu_alloc_coherent(struct device *hwdev, size_t size,
-			   dma_addr_t *dma_handle, unsigned int __nocast flag)
+			   dma_addr_t *dma_handle, gfp_t flag)
 {
 	return iommu_alloc_coherent(devnode_table(hwdev), size, dma_handle,
 			flag);
diff --git a/arch/ppc64/kernel/vio.c b/arch/ppc64/kernel/vio.c
index c90e1dd..0e555b7 100644
--- a/arch/ppc64/kernel/vio.c
+++ b/arch/ppc64/kernel/vio.c
@@ -218,7 +218,7 @@ static void vio_unmap_sg(struct device *dev, struct scatterlist *sglist,
 }
 
 static void *vio_alloc_coherent(struct device *dev, size_t size,
-			   dma_addr_t *dma_handle, unsigned int __nocast flag)
+			   dma_addr_t *dma_handle, gfp_t flag)
 {
 	return iommu_alloc_coherent(to_vio_dev(dev)->iommu_table, size,
 			dma_handle, flag);
diff --git a/arch/sh/kernel/smp.c b/arch/sh/kernel/smp.c
index 56a39d6..5ecefc0 100644
--- a/arch/sh/kernel/smp.c
+++ b/arch/sh/kernel/smp.c
@@ -22,6 +22,7 @@
 #include <linux/time.h>
 #include <linux/timex.h>
 #include <linux/sched.h>
+#include <linux/module.h>
 
 #include <asm/atomic.h>
 #include <asm/processor.h>
@@ -39,6 +40,8 @@ struct sh_cpuinfo cpu_data[NR_CPUS];
 extern void per_cpu_trap_init(void);
 
 cpumask_t cpu_possible_map;
+EXPORT_SYMBOL(cpu_possible_map);
+
 cpumask_t cpu_online_map;
 static atomic_t cpus_booted = ATOMIC_INIT(0);
 
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index aba0539..6537445 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -25,62 +25,6 @@ source "init/Kconfig"
 
 menu "General machine setup"
 
-config VT
-	bool
-	select INPUT
-	default y
-	---help---
-	  If you say Y here, you will get support for terminal devices with
-	  display and keyboard devices. These are called "virtual" because you
-	  can run several virtual terminals (also called virtual consoles) on
-	  one physical terminal. This is rather useful, for example one
-	  virtual terminal can collect system messages and warnings, another
-	  one can be used for a text-mode user session, and a third could run
-	  an X session, all in parallel. Switching between virtual terminals
-	  is done with certain key combinations, usually Alt-<function key>.
-
-	  The setterm command ("man setterm") can be used to change the
-	  properties (such as colors or beeping) of a virtual terminal. The
-	  man page console_codes(4) ("man console_codes") contains the special
-	  character sequences that can be used to change those properties
-	  directly. The fonts used on virtual terminals can be changed with
-	  the setfont ("man setfont") command and the key bindings are defined
-	  with the loadkeys ("man loadkeys") command.
-
-	  You need at least one virtual terminal device in order to make use
-	  of your keyboard and monitor. Therefore, only people configuring an
-	  embedded system would want to say N here in order to save some
-	  memory; the only way to log into such a system is then via a serial
-	  or network connection.
-
-	  If unsure, say Y, or else you won't be able to do much with your new
-	  shiny Linux system :-)
-
-config VT_CONSOLE
-	bool
-	default y
-	---help---
-	  The system console is the device which receives all kernel messages
-	  and warnings and which allows logins in single user mode. If you
-	  answer Y here, a virtual terminal (the device used to interact with
-	  a physical terminal) can be used as system console. This is the most
-	  common mode of operations, so you should say Y here unless you want
-	  the kernel messages be output only to a serial port (in which case
-	  you should say Y to "Console on serial port", below).
-
-	  If you do say Y here, by default the currently visible virtual
-	  terminal (/dev/tty0) will be used as system console. You can change
-	  that with a kernel command line option such as "console=tty3" which
-	  would use the third virtual terminal as system console. (Try "man
-	  bootparam" or see the documentation of your boot loader (lilo or
-	  loadlin) about how to pass options to the kernel at boot time.)
-
-	  If unsure, say Y.
-
-config HW_CONSOLE
-	bool
-	default y
-
 config SMP
 	bool "Symmetric multi-processing support (does not work on sun4/sun4c)"
 	depends on BROKEN
diff --git a/arch/sparc64/kernel/dtlb_base.S b/arch/sparc64/kernel/dtlb_base.S
index 702d349..6528786 100644
--- a/arch/sparc64/kernel/dtlb_base.S
+++ b/arch/sparc64/kernel/dtlb_base.S
@@ -53,19 +53,18 @@
  * be guaranteed to be 0 ... mmu_context.h does guarantee this
  * by only using 10 bits in the hwcontext value.
  */
-#define CREATE_VPTE_OFFSET1(r1, r2)
+#define CREATE_VPTE_OFFSET1(r1, r2) nop
 #define CREATE_VPTE_OFFSET2(r1, r2) \
 				srax	r1, 10, r2
-#define CREATE_VPTE_NOP		nop
 #else
 #define CREATE_VPTE_OFFSET1(r1, r2) \
 				srax	r1, PAGE_SHIFT, r2
 #define CREATE_VPTE_OFFSET2(r1, r2) \
 				sllx	r2, 3, r2
-#define CREATE_VPTE_NOP
 #endif
 
 /* DTLB ** ICACHE line 1: Quick user TLB misses		*/
+	mov		TLB_SFSR, %g1
 	ldxa		[%g1 + %g1] ASI_DMMU, %g4	! Get TAG_ACCESS
 	andcc		%g4, TAG_CONTEXT_BITS, %g0	! From Nucleus?
 from_tl1_trap:
@@ -74,18 +73,16 @@ from_tl1_trap:
 	be,pn		%xcc, kvmap			! Yep, special processing
 	 CREATE_VPTE_OFFSET2(%g4, %g6)			! Create VPTE offset
 	cmp		%g5, 4				! Last trap level?
-	be,pn		%xcc, longpath			! Yep, cannot risk VPTE miss
-	 nop						! delay slot
 
 /* DTLB ** ICACHE line 2: User finish + quick kernel TLB misses	*/
+	be,pn		%xcc, longpath			! Yep, cannot risk VPTE miss
+	 nop						! delay slot
 	ldxa		[%g3 + %g6] ASI_S, %g5		! Load VPTE
 1:	brgez,pn	%g5, longpath			! Invalid, branch out
 	 nop						! Delay-slot
 9:	stxa		%g5, [%g0] ASI_DTLB_DATA_IN	! Reload TLB
 	retry						! Trap return
 	nop
-	nop
-	nop
 
 /* DTLB ** ICACHE line 3: winfixups+real_faults		*/
 longpath:
@@ -106,8 +103,7 @@ longpath:
 	nop
 	nop
 	nop
-	CREATE_VPTE_NOP
+	nop
 
 #undef CREATE_VPTE_OFFSET1
 #undef CREATE_VPTE_OFFSET2
-#undef CREATE_VPTE_NOP
diff --git a/arch/sparc64/kernel/dtlb_prot.S b/arch/sparc64/kernel/dtlb_prot.S
index d848bb7..e0a9201 100644
--- a/arch/sparc64/kernel/dtlb_prot.S
+++ b/arch/sparc64/kernel/dtlb_prot.S
@@ -14,14 +14,14 @@
  */
 
 /* PROT ** ICACHE line 1: User DTLB protection trap	*/
-	stxa		%g0, [%g1] ASI_DMMU		! Clear SFSR FaultValid bit
-	membar		#Sync				! Synchronize ASI stores
-	rdpr		%pstate, %g5			! Move into alternate globals
+	mov		TLB_SFSR, %g1
+	stxa		%g0, [%g1] ASI_DMMU		! Clear FaultValid bit
+	membar		#Sync				! Synchronize stores
+	rdpr		%pstate, %g5			! Move into alt-globals
 	wrpr		%g5, PSTATE_AG|PSTATE_MG, %pstate
-	rdpr		%tl, %g1			! Need to do a winfixup?
+	rdpr		%tl, %g1			! Need a winfixup?
 	cmp		%g1, 1				! Trap level >1?
-	mov		TLB_TAG_ACCESS, %g4		! Prepare reload of vaddr
-	nop
+	mov		TLB_TAG_ACCESS, %g4		! For reload of vaddr
 
 /* PROT ** ICACHE line 2: More real fault processing */
 	bgu,pn		%xcc, winfix_trampoline		! Yes, perform winfixup
diff --git a/arch/sparc64/kernel/entry.S b/arch/sparc64/kernel/entry.S
index 2879b10..11a8484 100644
--- a/arch/sparc64/kernel/entry.S
+++ b/arch/sparc64/kernel/entry.S
@@ -33,7 +33,7 @@
 	/* This is trivial with the new code... */
 	.globl		do_fpdis
 do_fpdis:
-	sethi		%hi(TSTATE_PEF), %g4					! IEU0
+	sethi		%hi(TSTATE_PEF), %g4
 	rdpr		%tstate, %g5
 	andcc		%g5, %g4, %g0
 	be,pt		%xcc, 1f
@@ -50,18 +50,18 @@ do_fpdis:
 	add		%g0, %g0, %g0
 	ba,a,pt		%xcc, rtrap_clr_l6
 
-1:	ldub		[%g6 + TI_FPSAVED], %g5					! Load	Group
-	wr		%g0, FPRS_FEF, %fprs					! LSU	Group+4bubbles
-	andcc		%g5, FPRS_FEF, %g0					! IEU1	Group
-	be,a,pt		%icc, 1f						! CTI
-	 clr		%g7							! IEU0
-	ldx		[%g6 + TI_GSR], %g7					! Load	Group
-1:	andcc		%g5, FPRS_DL, %g0					! IEU1
-	bne,pn		%icc, 2f						! CTI
-	 fzero		%f0							! FPA
-	andcc		%g5, FPRS_DU, %g0					! IEU1  Group
-	bne,pn		%icc, 1f						! CTI
-	 fzero		%f2							! FPA
+1:	ldub		[%g6 + TI_FPSAVED], %g5
+	wr		%g0, FPRS_FEF, %fprs
+	andcc		%g5, FPRS_FEF, %g0
+	be,a,pt		%icc, 1f
+	 clr		%g7
+	ldx		[%g6 + TI_GSR], %g7
+1:	andcc		%g5, FPRS_DL, %g0
+	bne,pn		%icc, 2f
+	 fzero		%f0
+	andcc		%g5, FPRS_DU, %g0
+	bne,pn		%icc, 1f
+	 fzero		%f2
 	faddd		%f0, %f2, %f4
 	fmuld		%f0, %f2, %f6
 	faddd		%f0, %f2, %f8
@@ -97,15 +97,17 @@ do_fpdis:
 	faddd		%f0, %f2, %f4
 	fmuld		%f0, %f2, %f6
 	ldxa		[%g3] ASI_DMMU, %g5
-cplus_fptrap_insn_1:
-	sethi		%hi(0), %g2
+	sethi		%hi(sparc64_kern_sec_context), %g2
+	ldx		[%g2 + %lo(sparc64_kern_sec_context)], %g2
 	stxa		%g2, [%g3] ASI_DMMU
 	membar		#Sync
 	add		%g6, TI_FPREGS + 0xc0, %g2
 	faddd		%f0, %f2, %f8
 	fmuld		%f0, %f2, %f10
-	ldda		[%g1] ASI_BLK_S, %f32	! grrr, where is ASI_BLK_NUCLEUS 8-(
+	membar		#Sync
+	ldda		[%g1] ASI_BLK_S, %f32
 	ldda		[%g2] ASI_BLK_S, %f48
+	membar		#Sync
 	faddd		%f0, %f2, %f12
 	fmuld		%f0, %f2, %f14
 	faddd		%f0, %f2, %f16
@@ -116,7 +118,6 @@ cplus_fptrap_insn_1:
 	fmuld		%f0, %f2, %f26
 	faddd		%f0, %f2, %f28
 	fmuld		%f0, %f2, %f30
-	membar		#Sync
 	b,pt		%xcc, fpdis_exit
 	 nop
 2:	andcc		%g5, FPRS_DU, %g0
@@ -126,15 +127,17 @@ cplus_fptrap_insn_1:
 	fzero		%f34
 	ldxa		[%g3] ASI_DMMU, %g5
 	add		%g6, TI_FPREGS, %g1
-cplus_fptrap_insn_2:
-	sethi		%hi(0), %g2
+	sethi		%hi(sparc64_kern_sec_context), %g2
+	ldx		[%g2 + %lo(sparc64_kern_sec_context)], %g2
 	stxa		%g2, [%g3] ASI_DMMU
 	membar		#Sync
 	add		%g6, TI_FPREGS + 0x40, %g2
 	faddd		%f32, %f34, %f36
 	fmuld		%f32, %f34, %f38
-	ldda		[%g1] ASI_BLK_S, %f0	! grrr, where is ASI_BLK_NUCLEUS 8-(
+	membar		#Sync
+	ldda		[%g1] ASI_BLK_S, %f0
 	ldda		[%g2] ASI_BLK_S, %f16
+	membar		#Sync
 	faddd		%f32, %f34, %f40
 	fmuld		%f32, %f34, %f42
 	faddd		%f32, %f34, %f44
@@ -147,18 +150,18 @@ cplus_fptrap_insn_2:
 	fmuld		%f32, %f34, %f58
 	faddd		%f32, %f34, %f60
 	fmuld		%f32, %f34, %f62
-	membar		#Sync
 	ba,pt		%xcc, fpdis_exit
 	 nop
 3:	mov		SECONDARY_CONTEXT, %g3
 	add		%g6, TI_FPREGS, %g1
 	ldxa		[%g3] ASI_DMMU, %g5
-cplus_fptrap_insn_3:
-	sethi		%hi(0), %g2
+	sethi		%hi(sparc64_kern_sec_context), %g2
+	ldx		[%g2 + %lo(sparc64_kern_sec_context)], %g2
 	stxa		%g2, [%g3] ASI_DMMU
 	membar		#Sync
 	mov		0x40, %g2
-	ldda		[%g1] ASI_BLK_S, %f0		! grrr, where is ASI_BLK_NUCLEUS 8-(
+	membar		#Sync
+	ldda		[%g1] ASI_BLK_S, %f0
 	ldda		[%g1 + %g2] ASI_BLK_S, %f16
 	add		%g1, 0x80, %g1
 	ldda		[%g1] ASI_BLK_S, %f32
@@ -319,8 +322,8 @@ do_fptrap_after_fsr:
 	stx		%g3, [%g6 + TI_GSR]
 	mov		SECONDARY_CONTEXT, %g3
 	ldxa		[%g3] ASI_DMMU, %g5
-cplus_fptrap_insn_4:
-	sethi		%hi(0), %g2
+	sethi		%hi(sparc64_kern_sec_context), %g2
+	ldx		[%g2 + %lo(sparc64_kern_sec_context)], %g2
 	stxa		%g2, [%g3] ASI_DMMU
 	membar		#Sync
 	add		%g6, TI_FPREGS, %g2
@@ -341,33 +344,6 @@ cplus_fptrap_insn_4:
 	ba,pt		%xcc, etrap
 	 wr		%g0, 0, %fprs
 
-cplus_fptrap_1:
-	sethi		%hi(CTX_CHEETAH_PLUS_CTX0), %g2
-
-	.globl		cheetah_plus_patch_fpdis
-cheetah_plus_patch_fpdis:
-	/* We configure the dTLB512_0 for 4MB pages and the
-	 * dTLB512_1 for 8K pages when in context zero.
-	 */
-	sethi			%hi(cplus_fptrap_1), %o0
-	lduw			[%o0 + %lo(cplus_fptrap_1)], %o1
-
-	set			cplus_fptrap_insn_1, %o2
-	stw			%o1, [%o2]
-	flush			%o2
-	set			cplus_fptrap_insn_2, %o2
-	stw			%o1, [%o2]
-	flush			%o2
-	set			cplus_fptrap_insn_3, %o2
-	stw			%o1, [%o2]
-	flush			%o2
-	set			cplus_fptrap_insn_4, %o2
-	stw			%o1, [%o2]
-	flush			%o2
-
-	retl
-	 nop
-
 	/* The registers for cross calls will be:
 	 *
 	 * DATA 0: [low 32-bits]  Address of function to call, jmp to this
diff --git a/arch/sparc64/kernel/etrap.S b/arch/sparc64/kernel/etrap.S
index 50d2af1..0d8eba2 100644
--- a/arch/sparc64/kernel/etrap.S
+++ b/arch/sparc64/kernel/etrap.S
@@ -68,12 +68,8 @@ etrap_irq:
 
 		wrpr	%g3, 0, %otherwin
 		wrpr	%g2, 0, %wstate
-cplus_etrap_insn_1:
-		sethi	%hi(0), %g3
-		sllx	%g3, 32, %g3
-cplus_etrap_insn_2:
-		sethi	%hi(0), %g2
-		or	%g3, %g2, %g3
+		sethi	%hi(sparc64_kern_pri_context), %g2
+		ldx	[%g2 + %lo(sparc64_kern_pri_context)], %g3
 		stxa	%g3, [%l4] ASI_DMMU
 		flush	%l6
 		wr	%g0, ASI_AIUS, %asi
@@ -215,12 +211,8 @@ scetrap:	rdpr	%pil, %g2
 		mov	PRIMARY_CONTEXT, %l4
 		wrpr	%g3, 0, %otherwin
 		wrpr	%g2, 0, %wstate
-cplus_etrap_insn_3:
-		sethi	%hi(0), %g3
-		sllx	%g3, 32, %g3
-cplus_etrap_insn_4:
-		sethi	%hi(0), %g2
-		or	%g3, %g2, %g3
+		sethi	%hi(sparc64_kern_pri_context), %g2
+		ldx	[%g2 + %lo(sparc64_kern_pri_context)], %g3
 		stxa	%g3, [%l4] ASI_DMMU
 		flush	%l6
 
@@ -264,38 +256,3 @@ cplus_etrap_insn_4:
 
 #undef TASK_REGOFF
 #undef ETRAP_PSTATE1
-
-cplus_einsn_1:
-		sethi			%uhi(CTX_CHEETAH_PLUS_NUC), %g3
-cplus_einsn_2:
-		sethi			%hi(CTX_CHEETAH_PLUS_CTX0), %g2
-
-		.globl			cheetah_plus_patch_etrap
-cheetah_plus_patch_etrap:
-		/* We configure the dTLB512_0 for 4MB pages and the
-		 * dTLB512_1 for 8K pages when in context zero.
-		 */
-		sethi			%hi(cplus_einsn_1), %o0
-		sethi			%hi(cplus_etrap_insn_1), %o2
-		lduw			[%o0 + %lo(cplus_einsn_1)], %o1
-		or			%o2, %lo(cplus_etrap_insn_1), %o2
-		stw			%o1, [%o2]
-		flush			%o2
-		sethi			%hi(cplus_etrap_insn_3), %o2
-		or			%o2, %lo(cplus_etrap_insn_3), %o2
-		stw			%o1, [%o2]
-		flush			%o2
-
-		sethi			%hi(cplus_einsn_2), %o0
-		sethi			%hi(cplus_etrap_insn_2), %o2
-		lduw			[%o0 + %lo(cplus_einsn_2)], %o1
-		or			%o2, %lo(cplus_etrap_insn_2), %o2
-		stw			%o1, [%o2]
-		flush			%o2
-		sethi			%hi(cplus_etrap_insn_4), %o2
-		or			%o2, %lo(cplus_etrap_insn_4), %o2
-		stw			%o1, [%o2]
-		flush			%o2
-
-		retl
-		 nop
diff --git a/arch/sparc64/kernel/head.S b/arch/sparc64/kernel/head.S
index 89406f9..b49dcd4 100644
--- a/arch/sparc64/kernel/head.S
+++ b/arch/sparc64/kernel/head.S
@@ -28,19 +28,14 @@
 #include <asm/mmu.h>
 	
 /* This section from from _start to sparc64_boot_end should fit into
- * 0x0000.0000.0040.4000 to 0x0000.0000.0040.8000 and will be sharing space
- * with bootup_user_stack, which is from 0x0000.0000.0040.4000 to
- * 0x0000.0000.0040.6000 and empty_bad_page, which is from
- * 0x0000.0000.0040.6000 to 0x0000.0000.0040.8000. 
+ * 0x0000000000404000 to 0x0000000000408000.
  */
-
 	.text
 	.globl	start, _start, stext, _stext
 _start:
 start:
 _stext:
 stext:
-bootup_user_stack:
 ! 0x0000000000404000
 	b	sparc64_boot
 	 flushw					/* Flush register file.      */
@@ -191,8 +186,9 @@ prom_boot_mapping_phys_low:
 	stx	%l3, [%sp + 2047 + 128 + 0x10]	! num_rets, 5
 	stx	%l2, [%sp + 2047 + 128 + 0x18]	! arg1: "translate"
 	stx	%l5, [%sp + 2047 + 128 + 0x20]	! arg2: prom_mmu_ihandle_cache
-	srlx	%l0, 22, %l3
-	sllx	%l3, 22, %l3
+	/* PAGE align */
+	srlx	%l0, 13, %l3
+	sllx	%l3, 13, %l3
 	stx	%l3, [%sp + 2047 + 128 + 0x28]	! arg3: vaddr, our PC
 	stx	%g0, [%sp + 2047 + 128 + 0x30]	! res1
 	stx	%g0, [%sp + 2047 + 128 + 0x38]	! res2
@@ -211,6 +207,9 @@ prom_boot_mapping_phys_low:
 	ldx	[%sp + 2047 + 128 + 0x48], %l2	! physaddr high
 	stx	%l2, [%l4 + 0x0]
 	ldx	[%sp + 2047 + 128 + 0x50], %l3	! physaddr low
+	/* 4MB align */
+	srlx	%l3, 22, %l3
+	sllx	%l3, 22, %l3
 	stx	%l3, [%l4 + 0x8]
 
 	/* Leave service as-is, "call-method" */
@@ -325,23 +324,7 @@ cheetah_tlb_fixup:
 1:	sethi	%hi(tlb_type), %g1
 	stw	%g2, [%g1 + %lo(tlb_type)]
 
-	BRANCH_IF_CHEETAH_PLUS_OR_FOLLOWON(g1,g7,1f)
-	ba,pt	%xcc, 2f
-	 nop
-
-1:	/* Patch context register writes to support nucleus page
-	 * size correctly.
-	 */
-	call	cheetah_plus_patch_etrap
-	 nop
-	call	cheetah_plus_patch_rtrap
-	 nop
-	call	cheetah_plus_patch_fpdis
-	 nop
-	call	cheetah_plus_patch_winfixup
-	 nop
-
-2:	/* Patch copy/page operations to cheetah optimized versions. */
+	/* Patch copy/page operations to cheetah optimized versions. */
 	call	cheetah_patch_copyops
 	 nop
 	call	cheetah_patch_copy_page
@@ -398,32 +381,78 @@ tlb_fixup_done:
 	 nop
 	/* Not reached... */
 
-/* IMPORTANT NOTE: Whenever making changes here, check
- * trampoline.S as well. -jj */
-	.globl	setup_tba
-setup_tba:	/* i0 = is_starfire */
-	save	%sp, -160, %sp
+	/* This is meant to allow the sharing of this code between
+	 * boot processor invocation (via setup_tba() below) and
+	 * secondary processor startup (via trampoline.S).  The
+	 * former does use this code, the latter does not yet due
+	 * to some complexities.  That should be fixed up at some
+	 * point.
+	 *
+	 * There used to be enormous complexity wrt. transferring
+	 * over from the firwmare's trap table to the Linux kernel's.
+	 * For example, there was a chicken & egg problem wrt. building
+	 * the OBP page tables, yet needing to be on the Linux kernel
+	 * trap table (to translate PAGE_OFFSET addresses) in order to
+	 * do that.
+	 *
+	 * We now handle OBP tlb misses differently, via linear lookups
+	 * into the prom_trans[] array.  So that specific problem no
+	 * longer exists.  Yet, unfortunately there are still some issues
+	 * preventing trampoline.S from using this code... ho hum.
+	 */
+	.globl	setup_trap_table
+setup_trap_table:
+	save	%sp, -192, %sp
 
-	rdpr	%tba, %g7
-	sethi	%hi(prom_tba), %o1
-	or	%o1, %lo(prom_tba), %o1
-	stx	%g7, [%o1]
+	/* Force interrupts to be disabled. */
+	rdpr	%pstate, %o1
+	andn	%o1, PSTATE_IE, %o1
+	wrpr	%o1, 0x0, %pstate
+	wrpr	%g0, 15, %pil
+
+	/* Make the firmware call to jump over to the Linux trap table.  */
+	call	prom_set_trap_table
+	 sethi	%hi(sparc64_ttable_tl0), %o0
+
+	/* Start using proper page size encodings in ctx register.  */
+	sethi	%hi(sparc64_kern_pri_context), %g3
+	ldx	[%g3 + %lo(sparc64_kern_pri_context)], %g2
+	mov	PRIMARY_CONTEXT, %g1
+	stxa	%g2, [%g1] ASI_DMMU
+	membar	#Sync
+
+	/* The Linux trap handlers expect various trap global registers
+	 * to be setup with some fixed values.  So here we set these
+	 * up very carefully.  These globals are:
+	 *
+	 * Alternate Globals (PSTATE_AG):
+	 *
+	 * %g6			--> current_thread_info()
+	 *
+	 * MMU Globals (PSTATE_MG):
+	 *
+	 * %g1			--> TLB_SFSR
+	 * %g2			--> ((_PAGE_VALID | _PAGE_SZ4MB |
+	 *			      _PAGE_CP | _PAGE_CV | _PAGE_P | _PAGE_W)
+	 *			     ^ 0xfffff80000000000)
+	 * (this %g2 value is used for computing the PAGE_OFFSET kernel
+	 *  TLB entries quickly, the virtual address of the fault XOR'd
+	 *  with this %g2 value is the PTE to load into the TLB)
+	 * %g3			--> VPTE_BASE_CHEETAH or VPTE_BASE_SPITFIRE
+	 *
+	 * Interrupt Globals (PSTATE_IG, setup by init_irqwork_curcpu()):
+	 *
+	 * %g6			--> __irq_work[smp_processor_id()]
+	 */
 
-	/* Setup "Linux" globals 8-) */
 	rdpr	%pstate, %o1
 	mov	%g6, %o2
-	wrpr	%o1, (PSTATE_AG|PSTATE_IE), %pstate
-	sethi	%hi(sparc64_ttable_tl0), %g1
-	wrpr	%g1, %tba
+	wrpr	%o1, PSTATE_AG, %pstate
 	mov	%o2, %g6
 
-	/* Set up MMU globals */
-	wrpr	%o1, (PSTATE_MG|PSTATE_IE), %pstate
-
-	/* Set fixed globals used by dTLB miss handler. */
 #define KERN_HIGHBITS		((_PAGE_VALID|_PAGE_SZ4MB)^0xfffff80000000000)
 #define KERN_LOWBITS		(_PAGE_CP | _PAGE_CV | _PAGE_P | _PAGE_W)
-
+	wrpr	%o1, PSTATE_MG, %pstate
 	mov	TSB_REG, %g1
 	stxa	%g0, [%g1] ASI_DMMU
 	membar	#Sync
@@ -435,17 +464,17 @@ setup_tba:	/* i0 = is_starfire */
 	sllx	%g2, 32, %g2
 	or	%g2, KERN_LOWBITS, %g2
 
-	BRANCH_IF_ANY_CHEETAH(g3,g7,cheetah_vpte_base)
-	ba,pt	%xcc, spitfire_vpte_base
+	BRANCH_IF_ANY_CHEETAH(g3,g7,8f)
+	ba,pt	%xcc, 9f
 	 nop
 
-cheetah_vpte_base:
+8:
 	sethi		%uhi(VPTE_BASE_CHEETAH), %g3
 	or		%g3, %ulo(VPTE_BASE_CHEETAH), %g3
 	ba,pt		%xcc, 2f
 	 sllx		%g3, 32, %g3
 
-spitfire_vpte_base:
+9:
 	sethi		%uhi(VPTE_BASE_SPITFIRE), %g3
 	or		%g3, %ulo(VPTE_BASE_SPITFIRE), %g3
 	sllx		%g3, 32, %g3
@@ -471,48 +500,55 @@ spitfire_vpte_base:
 	sllx	%o2, 32, %o2
 	wr	%o2, %asr25
 
-	/* Ok, we're done setting up all the state our trap mechanims needs,
-	 * now get back into normal globals and let the PROM know what is up.
-	 */
 2:
 	wrpr	%g0, %g0, %wstate
-	wrpr	%o1, PSTATE_IE, %pstate
+	wrpr	%o1, 0x0, %pstate
 
 	call	init_irqwork_curcpu
 	 nop
 
-	call	prom_set_trap_table
-	 sethi	%hi(sparc64_ttable_tl0), %o0
-
-	BRANCH_IF_CHEETAH_PLUS_OR_FOLLOWON(g2,g3,1f)
-	ba,pt	%xcc, 2f
-	 nop
-
-1:	/* Start using proper page size encodings in ctx register.  */
-	sethi	%uhi(CTX_CHEETAH_PLUS_NUC), %g3
-	mov	PRIMARY_CONTEXT, %g1
-	sllx	%g3, 32, %g3
-	sethi	%hi(CTX_CHEETAH_PLUS_CTX0), %g2
-	or	%g3, %g2, %g3
-	stxa	%g3, [%g1] ASI_DMMU
-	membar	#Sync
-
-2:
+	/* Now we can turn interrupts back on. */
 	rdpr	%pstate, %o1
 	or	%o1, PSTATE_IE, %o1
 	wrpr	%o1, 0, %pstate
+	wrpr	%g0, 0x0, %pil
+
+	ret
+	 restore
+
+	.globl	setup_tba
+setup_tba:	/* i0 = is_starfire */
+	save	%sp, -192, %sp
+
+	/* The boot processor is the only cpu which invokes this
+	 * routine, the other cpus set things up via trampoline.S.
+	 * So save the OBP trap table address here.
+	 */
+	rdpr	%tba, %g7
+	sethi	%hi(prom_tba), %o1
+	or	%o1, %lo(prom_tba), %o1
+	stx	%g7, [%o1]
+
+	call	setup_trap_table
+	 nop
 
 	ret
 	 restore
+sparc64_boot_end:
+
+#include "systbls.S"
+#include "ktlb.S"
+#include "etrap.S"
+#include "rtrap.S"
+#include "winfixup.S"
+#include "entry.S"
 
 /*
- * The following skips make sure the trap table in ttable.S is aligned
+ * The following skip makes sure the trap table in ttable.S is aligned
  * on a 32K boundary as required by the v9 specs for TBA register.
  */
-sparc64_boot_end:
-	.skip	0x2000 + _start - sparc64_boot_end
-bootup_user_stack_end:
-	.skip	0x2000
+1:
+	.skip	0x4000 + _start - 1b
 
 #ifdef CONFIG_SBUS
 /* This is just a hack to fool make depend config.h discovering
@@ -524,15 +560,6 @@ bootup_user_stack_end:
 ! 0x0000000000408000
 
 #include "ttable.S"
-#include "systbls.S"
-#include "ktlb.S"
-#include "etrap.S"
-#include "rtrap.S"
-#include "winfixup.S"
-#include "entry.S"
-
-	/* This is just anal retentiveness on my part... */
-	.align	16384
 
 	.data
 	.align	8
diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c
index c9b6916..233526b 100644
--- a/arch/sparc64/kernel/irq.c
+++ b/arch/sparc64/kernel/irq.c
@@ -27,6 +27,7 @@
 #include <asm/atomic.h>
 #include <asm/system.h>
 #include <asm/irq.h>
+#include <asm/io.h>
 #include <asm/sbus.h>
 #include <asm/iommu.h>
 #include <asm/upa.h>
diff --git a/arch/sparc64/kernel/itlb_base.S b/arch/sparc64/kernel/itlb_base.S
index b5e32df..4951ff8 100644
--- a/arch/sparc64/kernel/itlb_base.S
+++ b/arch/sparc64/kernel/itlb_base.S
@@ -15,14 +15,12 @@
  */
 #define CREATE_VPTE_OFFSET1(r1, r2) \
 				srax	r1, 10, r2
-#define CREATE_VPTE_OFFSET2(r1, r2)
-#define CREATE_VPTE_NOP		nop
+#define CREATE_VPTE_OFFSET2(r1, r2) nop
 #else /* PAGE_SHIFT */
 #define CREATE_VPTE_OFFSET1(r1, r2) \
 				srax	r1, PAGE_SHIFT, r2
 #define CREATE_VPTE_OFFSET2(r1, r2) \
 				sllx	r2, 3, r2
-#define CREATE_VPTE_NOP
 #endif /* PAGE_SHIFT */
 
 
@@ -36,6 +34,7 @@
  */
 
 /* ITLB ** ICACHE line 1: Quick user TLB misses		*/
+	mov		TLB_SFSR, %g1
 	ldxa		[%g1 + %g1] ASI_IMMU, %g4	! Get TAG_ACCESS
 	CREATE_VPTE_OFFSET1(%g4, %g6)			! Create VPTE offset
 	CREATE_VPTE_OFFSET2(%g4, %g6)			! Create VPTE offset
@@ -43,41 +42,38 @@
 1:	brgez,pn	%g5, 3f				! Not valid, branch out
 	 sethi		%hi(_PAGE_EXEC), %g4		! Delay-slot
 	andcc		%g5, %g4, %g0			! Executable?
+
+/* ITLB ** ICACHE line 2: Real faults			*/
 	be,pn		%xcc, 3f			! Nope, branch.
 	 nop						! Delay-slot
 2:	stxa		%g5, [%g0] ASI_ITLB_DATA_IN	! Load PTE into TLB
 	retry						! Trap return
-3:	rdpr		%pstate, %g4			! Move into alternate globals
-
-/* ITLB ** ICACHE line 2: Real faults			*/
+3:	rdpr		%pstate, %g4			! Move into alt-globals
 	wrpr		%g4, PSTATE_AG|PSTATE_MG, %pstate
 	rdpr		%tpc, %g5			! And load faulting VA
 	mov		FAULT_CODE_ITLB, %g4		! It was read from ITLB
-sparc64_realfault_common:				! Called by TL0 dtlb_miss too
+
+/* ITLB ** ICACHE line 3: Finish faults	*/
+sparc64_realfault_common:				! Called by dtlb_miss
 	stb		%g4, [%g6 + TI_FAULT_CODE]
 	stx		%g5, [%g6 + TI_FAULT_ADDR]
 	ba,pt		%xcc, etrap			! Save state
 1:	 rd		%pc, %g7			! ...
-	nop
-
-/* ITLB ** ICACHE line 3: Finish faults + window fixups	*/
 	call		do_sparc64_fault		! Call fault handler
 	 add		%sp, PTREGS_OFF, %o0! Compute pt_regs arg
 	ba,pt		%xcc, rtrap_clr_l6		! Restore cpu state
 	 nop
+
+/* ITLB ** ICACHE line 4: Window fixups */
 winfix_trampoline:
 	rdpr		%tpc, %g3			! Prepare winfixup TNPC
-	or		%g3, 0x7c, %g3			! Compute offset to branch
+	or		%g3, 0x7c, %g3			! Compute branch offset
 	wrpr		%g3, %tnpc			! Write it into TNPC
 	done						! Do it to it
-
-/* ITLB ** ICACHE line 4: Unused...	*/
 	nop
 	nop
 	nop
 	nop
-	CREATE_VPTE_NOP
 
 #undef CREATE_VPTE_OFFSET1
 #undef CREATE_VPTE_OFFSET2
-#undef CREATE_VPTE_NOP
diff --git a/arch/sparc64/kernel/ktlb.S b/arch/sparc64/kernel/ktlb.S
index 7796b37..d9244d3 100644
--- a/arch/sparc64/kernel/ktlb.S
+++ b/arch/sparc64/kernel/ktlb.S
@@ -58,9 +58,6 @@ vpte_noent:
 	done
 
 vpte_insn_obp:
-	sethi		%hi(prom_pmd_phys), %g5
-	ldx		[%g5 + %lo(prom_pmd_phys)], %g5
-
 	/* Behave as if we are at TL0.  */
 	wrpr		%g0, 1, %tl
 	rdpr		%tpc, %g4	/* Find original faulting iaddr */
@@ -71,58 +68,57 @@ vpte_insn_obp:
 	mov		TLB_SFSR, %g1
 	stxa		%g4, [%g1 + %g1] ASI_IMMU
 
-	/* Get PMD offset.  */
-	srlx		%g4, 23, %g6
-	and		%g6, 0x7ff, %g6
-	sllx		%g6, 2, %g6
-
-	/* Load PMD, is it valid?  */
-	lduwa		[%g5 + %g6] ASI_PHYS_USE_EC, %g5
-	brz,pn		%g5, longpath
-	 sllx		%g5, 11, %g5
-
-	/* Get PTE offset.  */
-	srlx		%g4, 13, %g6
-	and		%g6, 0x3ff, %g6
-	sllx		%g6, 3, %g6
-
-	/* Load PTE.  */
-	ldxa		[%g5 + %g6] ASI_PHYS_USE_EC, %g5
-	brgez,pn	%g5, longpath
-	 nop
-
-	/* TLB load and return from trap.  */
+	sethi		%hi(prom_trans), %g5
+	or		%g5, %lo(prom_trans), %g5
+
+1:	ldx		[%g5 + 0x00], %g6	! base
+	brz,a,pn	%g6, longpath		! no more entries, fail
+	 mov		TLB_SFSR, %g1		! and restore %g1
+	ldx		[%g5 + 0x08], %g1	! len
+	add		%g6, %g1, %g1		! end
+	cmp		%g6, %g4
+	bgu,pt		%xcc, 2f
+	 cmp		%g4, %g1
+	bgeu,pt		%xcc, 2f
+	 ldx		[%g5 + 0x10], %g1	! PTE
+
+	/* TLB load, restore %g1, and return from trap.  */
+	sub		%g4, %g6, %g6
+	add		%g1, %g6, %g5
+	mov		TLB_SFSR, %g1
 	stxa		%g5, [%g0] ASI_ITLB_DATA_IN
 	retry
 
-kvmap_do_obp:
-	sethi		%hi(prom_pmd_phys), %g5
-	ldx		[%g5 + %lo(prom_pmd_phys)], %g5
-
-	/* Get PMD offset.  */
-	srlx		%g4, 23, %g6
-	and		%g6, 0x7ff, %g6
-	sllx		%g6, 2, %g6
-
-	/* Load PMD, is it valid?  */
-	lduwa		[%g5 + %g6] ASI_PHYS_USE_EC, %g5
-	brz,pn		%g5, longpath
-	 sllx		%g5, 11, %g5
-
-	/* Get PTE offset.  */
-	srlx		%g4, 13, %g6
-	and		%g6, 0x3ff, %g6
-	sllx		%g6, 3, %g6
-
-	/* Load PTE.  */
-	ldxa		[%g5 + %g6] ASI_PHYS_USE_EC, %g5
-	brgez,pn	%g5, longpath
-	 nop
+2:	ba,pt		%xcc, 1b
+	 add		%g5, (3 * 8), %g5	! next entry
 
-	/* TLB load and return from trap.  */
+kvmap_do_obp:
+	sethi		%hi(prom_trans), %g5
+	or		%g5, %lo(prom_trans), %g5
+	srlx		%g4, 13, %g4
+	sllx		%g4, 13, %g4
+
+1:	ldx		[%g5 + 0x00], %g6	! base
+	brz,a,pn	%g6, longpath		! no more entries, fail
+	 mov		TLB_SFSR, %g1		! and restore %g1
+	ldx		[%g5 + 0x08], %g1	! len
+	add		%g6, %g1, %g1		! end
+	cmp		%g6, %g4
+	bgu,pt		%xcc, 2f
+	 cmp		%g4, %g1
+	bgeu,pt		%xcc, 2f
+	 ldx		[%g5 + 0x10], %g1	! PTE
+
+	/* TLB load, restore %g1, and return from trap.  */
+	sub		%g4, %g6, %g6
+	add		%g1, %g6, %g5
+	mov		TLB_SFSR, %g1
 	stxa		%g5, [%g0] ASI_DTLB_DATA_IN
 	retry
 
+2:	ba,pt		%xcc, 1b
+	 add		%g5, (3 * 8), %g5	! next entry
+
 /*
  * On a first level data miss, check whether this is to the OBP range (note
  * that such accesses can be made by prom, as well as by kernel using
diff --git a/arch/sparc64/kernel/power.c b/arch/sparc64/kernel/power.c
index 946cee0..9e8362e 100644
--- a/arch/sparc64/kernel/power.c
+++ b/arch/sparc64/kernel/power.c
@@ -17,6 +17,7 @@
 
 #include <asm/system.h>
 #include <asm/ebus.h>
+#include <asm/isa.h>
 #include <asm/auxio.h>
 
 #include <linux/unistd.h>
@@ -100,46 +101,83 @@ again:
 	return 0;
 }
 
-static int __init has_button_interrupt(struct linux_ebus_device *edev)
+static int __init has_button_interrupt(unsigned int irq, int prom_node)
 {
-	if (edev->irqs[0] == PCI_IRQ_NONE)
+	if (irq == PCI_IRQ_NONE)
 		return 0;
-	if (!prom_node_has_property(edev->prom_node, "button"))
+	if (!prom_node_has_property(prom_node, "button"))
 		return 0;
 
 	return 1;
 }
 
-void __init power_init(void)
+static int __init power_probe_ebus(struct resource **resp, unsigned int *irq_p, int *prom_node_p)
 {
 	struct linux_ebus *ebus;
 	struct linux_ebus_device *edev;
+
+	for_each_ebus(ebus) {
+		for_each_ebusdev(edev, ebus) {
+			if (!strcmp(edev->prom_name, "power")) {
+				*resp = &edev->resource[0];
+				*irq_p = edev->irqs[0];
+				*prom_node_p = edev->prom_node;
+				return 0;
+			}
+		}
+	}
+	return -ENODEV;
+}
+
+static int __init power_probe_isa(struct resource **resp, unsigned int *irq_p, int *prom_node_p)
+{
+	struct sparc_isa_bridge *isa_bus;
+	struct sparc_isa_device *isa_dev;
+
+	for_each_isa(isa_bus) {
+		for_each_isadev(isa_dev, isa_bus) {
+			if (!strcmp(isa_dev->prom_name, "power")) {
+				*resp = &isa_dev->resource;
+				*irq_p = isa_dev->irq;
+				*prom_node_p = isa_dev->prom_node;
+				return 0;
+			}
+		}
+	}
+	return -ENODEV;
+}
+
+void __init power_init(void)
+{
+	struct resource *res = NULL;
+	unsigned int irq;
+	int prom_node;
 	static int invoked;
 
 	if (invoked)
 		return;
 	invoked = 1;
 
-	for_each_ebus(ebus) {
-		for_each_ebusdev(edev, ebus) {
-			if (!strcmp(edev->prom_name, "power"))
-				goto found;
-		}
-	}
+	if (!power_probe_ebus(&res, &irq, &prom_node))
+		goto found;
+
+	if (!power_probe_isa(&res, &irq, &prom_node))
+		goto found;
+
 	return;
 
 found:
-	power_reg = ioremap(edev->resource[0].start, 0x4);
+	power_reg = ioremap(res->start, 0x4);
 	printk("power: Control reg at %p ... ", power_reg);
 	poweroff_method = machine_halt;  /* able to use the standard halt */
-	if (has_button_interrupt(edev)) {
+	if (has_button_interrupt(irq, prom_node)) {
 		if (kernel_thread(powerd, NULL, CLONE_FS) < 0) {
 			printk("Failed to start power daemon.\n");
 			return;
 		}
 		printk("powerd running.\n");
 
-		if (request_irq(edev->irqs[0],
+		if (request_irq(irq,
 				power_handler, SA_SHIRQ, "power", NULL) < 0)
 			printk("power: Error, cannot register IRQ handler.\n");
 	} else {
diff --git a/arch/sparc64/kernel/rtrap.S b/arch/sparc64/kernel/rtrap.S
index fafd227..090dcca 100644
--- a/arch/sparc64/kernel/rtrap.S
+++ b/arch/sparc64/kernel/rtrap.S
@@ -256,9 +256,8 @@ rt_continue:	ldx			[%sp + PTREGS_OFF + PT_V9_G1], %g1
 		brnz,pn			%l3, kern_rtt
 		 mov			PRIMARY_CONTEXT, %l7
 		ldxa			[%l7 + %l7] ASI_DMMU, %l0
-cplus_rtrap_insn_1:
-		sethi			%hi(0), %l1
-		sllx			%l1, 32, %l1
+		sethi			%hi(sparc64_kern_pri_nuc_bits), %l1
+		ldx			[%l1 + %lo(sparc64_kern_pri_nuc_bits)], %l1
 		or			%l0, %l1, %l0
 		stxa			%l0, [%l7] ASI_DMMU
 		flush			%g6
@@ -313,53 +312,36 @@ kern_fpucheck:	ldub			[%g6 + TI_FPDEPTH], %l5
 		wr			%g1, FPRS_FEF, %fprs
 		ldx			[%o1 + %o5], %g1
 		add			%g6, TI_XFSR, %o1
-		membar			#StoreLoad | #LoadLoad
 		sll			%o0, 8, %o2
 		add			%g6, TI_FPREGS, %o3
 		brz,pn			%l6, 1f
 		 add			%g6, TI_FPREGS+0x40, %o4
 
+		membar			#Sync
 		ldda			[%o3 + %o2] ASI_BLK_P, %f0
 		ldda			[%o4 + %o2] ASI_BLK_P, %f16
+		membar			#Sync
 1:		andcc			%l2, FPRS_DU, %g0
 		be,pn			%icc, 1f
 		 wr			%g1, 0, %gsr
 		add			%o2, 0x80, %o2
+		membar			#Sync
 		ldda			[%o3 + %o2] ASI_BLK_P, %f32
 		ldda			[%o4 + %o2] ASI_BLK_P, %f48
-
 1:		membar			#Sync
 		ldx			[%o1 + %o5], %fsr
 2:		stb			%l5, [%g6 + TI_FPDEPTH]
 		ba,pt			%xcc, rt_continue
 		 nop
 5:		wr			%g0, FPRS_FEF, %fprs
-		membar			#StoreLoad | #LoadLoad
 		sll			%o0, 8, %o2
 
 		add			%g6, TI_FPREGS+0x80, %o3
 		add			%g6, TI_FPREGS+0xc0, %o4
+		membar			#Sync
 		ldda			[%o3 + %o2] ASI_BLK_P, %f32
 		ldda			[%o4 + %o2] ASI_BLK_P, %f48
 		membar			#Sync
 		wr			%g0, FPRS_DU, %fprs
 		ba,pt			%xcc, rt_continue
 		 stb			%l5, [%g6 + TI_FPDEPTH]
-
-cplus_rinsn_1:
-		sethi			%uhi(CTX_CHEETAH_PLUS_NUC), %l1
-
-		.globl			cheetah_plus_patch_rtrap
-cheetah_plus_patch_rtrap:
-		/* We configure the dTLB512_0 for 4MB pages and the
-		 * dTLB512_1 for 8K pages when in context zero.
-		 */
-		sethi			%hi(cplus_rinsn_1), %o0
-		sethi			%hi(cplus_rtrap_insn_1), %o2
-		lduw			[%o0 + %lo(cplus_rinsn_1)], %o1
-		or			%o2, %lo(cplus_rtrap_insn_1), %o2
-		stw			%o1, [%o2]
-		flush			%o2
-
-		retl
-		 nop
diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c
index 4c9c8f2..c1f3423 100644
--- a/arch/sparc64/kernel/setup.c
+++ b/arch/sparc64/kernel/setup.c
@@ -187,17 +187,13 @@ int prom_callback(long *args)
 		}
 
 		if ((va >= KERNBASE) && (va < (KERNBASE + (4 * 1024 * 1024)))) {
-			unsigned long kernel_pctx = 0;
-
-			if (tlb_type == cheetah_plus)
-				kernel_pctx |= (CTX_CHEETAH_PLUS_NUC |
-						CTX_CHEETAH_PLUS_CTX0);
+			extern unsigned long sparc64_kern_pri_context;
 
 			/* Spitfire Errata #32 workaround */
 			__asm__ __volatile__("stxa	%0, [%1] %2\n\t"
 					     "flush	%%g6"
 					     : /* No outputs */
-					     : "r" (kernel_pctx),
+					     : "r" (sparc64_kern_pri_context),
 					       "r" (PRIMARY_CONTEXT),
 					       "i" (ASI_DMMU));
 
diff --git a/arch/sparc64/kernel/trampoline.S b/arch/sparc64/kernel/trampoline.S
index 89f2fcf..9478551 100644
--- a/arch/sparc64/kernel/trampoline.S
+++ b/arch/sparc64/kernel/trampoline.S
@@ -336,20 +336,13 @@ do_unlock:
 	call		init_irqwork_curcpu
 	 nop
 
-	BRANCH_IF_CHEETAH_PLUS_OR_FOLLOWON(g2,g3,1f)
-	ba,pt	%xcc, 2f
-	 nop
-
-1:	/* Start using proper page size encodings in ctx register.  */
-	sethi	%uhi(CTX_CHEETAH_PLUS_NUC), %g3
+	/* Start using proper page size encodings in ctx register.  */
+	sethi	%hi(sparc64_kern_pri_context), %g3
+	ldx	[%g3 + %lo(sparc64_kern_pri_context)], %g2
 	mov	PRIMARY_CONTEXT, %g1
-	sllx	%g3, 32, %g3
-	sethi	%hi(CTX_CHEETAH_PLUS_CTX0), %g2
-	or	%g3, %g2, %g3
-	stxa	%g3, [%g1] ASI_DMMU
+	stxa	%g2, [%g1] ASI_DMMU
 	membar	#Sync
 
-2:
 	rdpr		%pstate, %o1
 	or		%o1, PSTATE_IE, %o1
 	wrpr		%o1, 0, %pstate
diff --git a/arch/sparc64/kernel/winfixup.S b/arch/sparc64/kernel/winfixup.S
index 99c809a..3916092 100644
--- a/arch/sparc64/kernel/winfixup.S
+++ b/arch/sparc64/kernel/winfixup.S
@@ -16,23 +16,14 @@
 	.text
 
 set_pcontext:
-cplus_winfixup_insn_1:
-	sethi	%hi(0), %l1
+	sethi	%hi(sparc64_kern_pri_context), %l1
+	ldx	[%l1 + %lo(sparc64_kern_pri_context)], %l1
 	mov	PRIMARY_CONTEXT, %g1
-	sllx	%l1, 32, %l1
-cplus_winfixup_insn_2:
-	sethi	%hi(0), %g2
-	or	%l1, %g2, %l1
 	stxa	%l1, [%g1] ASI_DMMU
 	flush	%g6
 	retl
 	 nop
 
-cplus_wfinsn_1:
-	sethi	%uhi(CTX_CHEETAH_PLUS_NUC), %l1
-cplus_wfinsn_2:
-	sethi	%hi(CTX_CHEETAH_PLUS_CTX0), %g2
-
 	.align	32
 
 	/* Here are the rules, pay attention.
@@ -395,23 +386,3 @@ window_dax_from_user_common:
 	 add		%sp, PTREGS_OFF, %o0
 	ba,pt		%xcc, rtrap
 	 clr		%l6
-	
-
-	.globl		cheetah_plus_patch_winfixup
-cheetah_plus_patch_winfixup:
-	sethi			%hi(cplus_wfinsn_1), %o0
-	sethi			%hi(cplus_winfixup_insn_1), %o2
-	lduw			[%o0 + %lo(cplus_wfinsn_1)], %o1
-	or			%o2, %lo(cplus_winfixup_insn_1), %o2
-	stw			%o1, [%o2]
-	flush			%o2
-
-	sethi			%hi(cplus_wfinsn_2), %o0
-	sethi			%hi(cplus_winfixup_insn_2), %o2
-	lduw			[%o0 + %lo(cplus_wfinsn_2)], %o1
-	or			%o2, %lo(cplus_winfixup_insn_2), %o2
-	stw			%o1, [%o2]
-	flush			%o2
-
-	retl
-	 nop
diff --git a/arch/sparc64/lib/VISsave.S b/arch/sparc64/lib/VISsave.S
index 4e18989..a0ded5c 100644
--- a/arch/sparc64/lib/VISsave.S
+++ b/arch/sparc64/lib/VISsave.S
@@ -59,15 +59,17 @@ vis1:	ldub		[%g6 + TI_FPSAVED], %g3
 	be,pn		%icc, 9b
 	 add		%g6, TI_FPREGS, %g2
 	andcc		%o5, FPRS_DL, %g0
-	membar		#StoreStore | #LoadStore
 
 	be,pn		%icc, 4f
 	 add		%g6, TI_FPREGS+0x40, %g3
+	membar		#Sync
 	stda		%f0, [%g2 + %g1] ASI_BLK_P
 	stda		%f16, [%g3 + %g1] ASI_BLK_P
+	membar		#Sync
 	andcc		%o5, FPRS_DU, %g0
 	be,pn		%icc, 5f
 4:	 add		%g1, 128, %g1
+	membar		#Sync
 	stda		%f32, [%g2 + %g1] ASI_BLK_P
 
 	stda		%f48, [%g3 + %g1] ASI_BLK_P
@@ -87,7 +89,7 @@ vis1:	ldub		[%g6 + TI_FPSAVED], %g3
 	sll		%g1, 5, %g1
 	add		%g6, TI_FPREGS+0xc0, %g3
 	wr		%g0, FPRS_FEF, %fprs
-	membar		#StoreStore | #LoadStore
+	membar		#Sync
 	stda		%f32, [%g2 + %g1] ASI_BLK_P
 	stda		%f48, [%g3 + %g1] ASI_BLK_P
 	membar		#Sync
@@ -128,8 +130,8 @@ VISenterhalf:
 	be,pn		%icc, 4f
 	 add		%g6, TI_FPREGS, %g2
 
-	membar		#StoreStore | #LoadStore
 	add		%g6, TI_FPREGS+0x40, %g3
+	membar		#Sync
 	stda		%f0, [%g2 + %g1] ASI_BLK_P
 	stda		%f16, [%g3 + %g1] ASI_BLK_P
 	membar		#Sync
diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c
index 5db5052..1e44ee2 100644
--- a/arch/sparc64/mm/init.c
+++ b/arch/sparc64/mm/init.c
@@ -105,7 +105,7 @@ static void __init read_obp_memory(const char *property,
 		regs[i].phys_addr = base;
 		regs[i].reg_size = size;
 	}
-	sort(regs, ents, sizeof(struct  linux_prom64_registers),
+	sort(regs, ents, sizeof(struct linux_prom64_registers),
 	     cmp_p64, NULL);
 }
 
@@ -133,6 +133,12 @@ extern unsigned int sparc_ramdisk_size;
 
 struct page *mem_map_zero __read_mostly;
 
+unsigned int sparc64_highest_unlocked_tlb_ent __read_mostly;
+
+unsigned long sparc64_kern_pri_context __read_mostly;
+unsigned long sparc64_kern_pri_nuc_bits __read_mostly;
+unsigned long sparc64_kern_sec_context __read_mostly;
+
 int bigkernel = 0;
 
 /* XXX Tune this... */
@@ -361,7 +367,11 @@ struct linux_prom_translation {
 	unsigned long size;
 	unsigned long data;
 };
-static struct linux_prom_translation prom_trans[512] __initdata;
+
+/* Exported for kernel TLB miss handling in ktlb.S */
+struct linux_prom_translation prom_trans[512] __read_mostly;
+unsigned int prom_trans_ents __read_mostly;
+unsigned int swapper_pgd_zero __read_mostly;
 
 extern unsigned long prom_boot_page;
 extern void prom_remap(unsigned long physpage, unsigned long virtpage, int mmu_ihandle);
@@ -371,178 +381,57 @@ extern void register_prom_callbacks(void);
 /* Exported for SMP bootup purposes. */
 unsigned long kern_locked_tte_data;
 
-/* Exported for kernel TLB miss handling in ktlb.S */
-unsigned long prom_pmd_phys __read_mostly;
-unsigned int swapper_pgd_zero __read_mostly;
-
-/* Allocate power-of-2 aligned chunks from the end of the
- * kernel image.  Return physical address.
- */
-static inline unsigned long early_alloc_phys(unsigned long size)
-{
-	unsigned long base;
-
-	BUILD_BUG_ON(size & (size - 1));
-
-	kern_size = (kern_size + (size - 1)) & ~(size - 1);
-	base = kern_base + kern_size;
-	kern_size += size;
-
-	return base;
-}
-
-static inline unsigned long load_phys32(unsigned long pa)
-{
-	unsigned long val;
-
-	__asm__ __volatile__("lduwa	[%1] %2, %0"
-			     : "=&r" (val)
-			     : "r" (pa), "i" (ASI_PHYS_USE_EC));
-
-	return val;
-}
-
-static inline unsigned long load_phys64(unsigned long pa)
-{
-	unsigned long val;
-
-	__asm__ __volatile__("ldxa	[%1] %2, %0"
-			     : "=&r" (val)
-			     : "r" (pa), "i" (ASI_PHYS_USE_EC));
-
-	return val;
-}
-
-static inline void store_phys32(unsigned long pa, unsigned long val)
-{
-	__asm__ __volatile__("stwa	%0, [%1] %2"
-			     : /* no outputs */
-			     : "r" (val), "r" (pa), "i" (ASI_PHYS_USE_EC));
-}
-
-static inline void store_phys64(unsigned long pa, unsigned long val)
-{
-	__asm__ __volatile__("stxa	%0, [%1] %2"
-			     : /* no outputs */
-			     : "r" (val), "r" (pa), "i" (ASI_PHYS_USE_EC));
-}
-
-#define BASE_PAGE_SIZE 8192
-
 /*
  * Translate PROM's mapping we capture at boot time into physical address.
  * The second parameter is only set from prom_callback() invocations.
  */
 unsigned long prom_virt_to_phys(unsigned long promva, int *error)
 {
-	unsigned long pmd_phys = (prom_pmd_phys +
-				  ((promva >> 23) & 0x7ff) * sizeof(pmd_t));
-	unsigned long pte_phys;
-	pmd_t pmd_ent;
-	pte_t pte_ent;
-	unsigned long base;
-
-	pmd_val(pmd_ent) = load_phys32(pmd_phys);
-	if (pmd_none(pmd_ent)) {
-		if (error)
-			*error = 1;
-		return 0;
-	}
+	int i;
 
-	pte_phys = (unsigned long)pmd_val(pmd_ent) << 11UL;
-	pte_phys += ((promva >> 13) & 0x3ff) * sizeof(pte_t);
-	pte_val(pte_ent) = load_phys64(pte_phys);
-	if (!pte_present(pte_ent)) {
-		if (error)
-			*error = 1;
-		return 0;
-	}
-	if (error) {
-		*error = 0;
-		return pte_val(pte_ent);
+	for (i = 0; i < prom_trans_ents; i++) {
+		struct linux_prom_translation *p = &prom_trans[i];
+
+		if (promva >= p->virt &&
+		    promva < (p->virt + p->size)) {
+			unsigned long base = p->data & _PAGE_PADDR;
+
+			if (error)
+				*error = 0;
+			return base + (promva & (8192 - 1));
+		}
 	}
-	base = pte_val(pte_ent) & _PAGE_PADDR;
-	return (base + (promva & (BASE_PAGE_SIZE - 1)));
+	if (error)
+		*error = 1;
+	return 0UL;
 }
 
 /* The obp translations are saved based on 8k pagesize, since obp can
  * use a mixture of pagesizes. Misses to the LOW_OBP_ADDRESS ->
- * HI_OBP_ADDRESS range are handled in entry.S and do not use the vpte
+ * HI_OBP_ADDRESS range are handled in ktlb.S and do not use the vpte
  * scheme (also, see rant in inherit_locked_prom_mappings()).
  */
-static void __init build_obp_range(unsigned long start, unsigned long end, unsigned long data)
-{
-	unsigned long vaddr;
-
-	for (vaddr = start; vaddr < end; vaddr += BASE_PAGE_SIZE) {
-		unsigned long val, pte_phys, pmd_phys;
-		pmd_t pmd_ent;
-		int i;
-
-		pmd_phys = (prom_pmd_phys +
-			    (((vaddr >> 23) & 0x7ff) * sizeof(pmd_t)));
-		pmd_val(pmd_ent) = load_phys32(pmd_phys);
-		if (pmd_none(pmd_ent)) {
-			pte_phys = early_alloc_phys(BASE_PAGE_SIZE);
-
-			for (i = 0; i < BASE_PAGE_SIZE / sizeof(pte_t); i++)
-				store_phys64(pte_phys+i*sizeof(pte_t),0);
-
-			pmd_val(pmd_ent) = pte_phys >> 11UL;
-			store_phys32(pmd_phys, pmd_val(pmd_ent));
-		}
-
-		pte_phys = (unsigned long)pmd_val(pmd_ent) << 11UL;
-		pte_phys += (((vaddr >> 13) & 0x3ff) * sizeof(pte_t));
-
-		val = data;
-
-		/* Clear diag TTE bits. */
-		if (tlb_type == spitfire)
-			val &= ~0x0003fe0000000000UL;
-
-		store_phys64(pte_phys, val | _PAGE_MODIFIED);
-
-		data += BASE_PAGE_SIZE;
-	}
-}
-
 static inline int in_obp_range(unsigned long vaddr)
 {
 	return (vaddr >= LOW_OBP_ADDRESS &&
 		vaddr < HI_OBP_ADDRESS);
 }
 
-#define OBP_PMD_SIZE 2048
-static void __init build_obp_pgtable(int prom_trans_ents)
+static int cmp_ptrans(const void *a, const void *b)
 {
-	unsigned long i;
-
-	prom_pmd_phys = early_alloc_phys(OBP_PMD_SIZE);
-	for (i = 0; i < OBP_PMD_SIZE; i += 4)
-		store_phys32(prom_pmd_phys + i, 0);
+	const struct linux_prom_translation *x = a, *y = b;
 
-	for (i = 0; i < prom_trans_ents; i++) {
-		unsigned long start, end;
-
-		if (!in_obp_range(prom_trans[i].virt))
-			continue;
-
-		start = prom_trans[i].virt;
-		end = start + prom_trans[i].size;
-		if (end > HI_OBP_ADDRESS)
-			end = HI_OBP_ADDRESS;
-
-		build_obp_range(start, end, prom_trans[i].data);
-	}
+	if (x->virt > y->virt)
+		return 1;
+	if (x->virt < y->virt)
+		return -1;
+	return 0;
 }
 
-/* Read OBP translations property into 'prom_trans[]'.
- * Return the number of entries.
- */
-static int __init read_obp_translations(void)
+/* Read OBP translations property into 'prom_trans[]'.  */
+static void __init read_obp_translations(void)
 {
-	int n, node;
+	int n, node, ents, first, last, i;
 
 	node = prom_finddevice("/virtual-memory");
 	n = prom_getproplen(node, "translations");
@@ -561,8 +450,44 @@ static int __init read_obp_translations(void)
 		prom_printf("prom_mappings: Couldn't get property.\n");
 		prom_halt();
 	}
+
 	n = n / sizeof(struct linux_prom_translation);
-	return n;
+
+	ents = n;
+
+	sort(prom_trans, ents, sizeof(struct linux_prom_translation),
+	     cmp_ptrans, NULL);
+
+	/* Now kick out all the non-OBP entries.  */
+	for (i = 0; i < ents; i++) {
+		if (in_obp_range(prom_trans[i].virt))
+			break;
+	}
+	first = i;
+	for (; i < ents; i++) {
+		if (!in_obp_range(prom_trans[i].virt))
+			break;
+	}
+	last = i;
+
+	for (i = 0; i < (last - first); i++) {
+		struct linux_prom_translation *src = &prom_trans[i + first];
+		struct linux_prom_translation *dest = &prom_trans[i];
+
+		*dest = *src;
+	}
+	for (; i < ents; i++) {
+		struct linux_prom_translation *dest = &prom_trans[i];
+		dest->virt = dest->size = dest->data = 0x0UL;
+	}
+
+	prom_trans_ents = last - first;
+
+	if (tlb_type == spitfire) {
+		/* Clear diag TTE bits. */
+		for (i = 0; i < prom_trans_ents; i++)
+			prom_trans[i].data &= ~0x0003fe0000000000UL;
+	}
 }
 
 static void __init remap_kernel(void)
@@ -582,29 +507,36 @@ static void __init remap_kernel(void)
 	prom_dtlb_load(tlb_ent, tte_data, tte_vaddr);
 	prom_itlb_load(tlb_ent, tte_data, tte_vaddr);
 	if (bigkernel) {
-		prom_dtlb_load(tlb_ent - 1,
+		tlb_ent -= 1;
+		prom_dtlb_load(tlb_ent,
 			       tte_data + 0x400000, 
 			       tte_vaddr + 0x400000);
-		prom_itlb_load(tlb_ent - 1,
+		prom_itlb_load(tlb_ent,
 			       tte_data + 0x400000, 
 			       tte_vaddr + 0x400000);
 	}
+	sparc64_highest_unlocked_tlb_ent = tlb_ent - 1;
+	if (tlb_type == cheetah_plus) {
+		sparc64_kern_pri_context = (CTX_CHEETAH_PLUS_CTX0 |
+					    CTX_CHEETAH_PLUS_NUC);
+		sparc64_kern_pri_nuc_bits = CTX_CHEETAH_PLUS_NUC;
+		sparc64_kern_sec_context = CTX_CHEETAH_PLUS_CTX0;
+	}
 }
 
+
 static void __init inherit_prom_mappings(void)
 {
-	int n;
-
-	n = read_obp_translations();
-	build_obp_pgtable(n);
+	read_obp_translations();
 
 	/* Now fixup OBP's idea about where we really are mapped. */
 	prom_printf("Remapping the kernel... ");
 	remap_kernel();
-
 	prom_printf("done.\n");
 
+	prom_printf("Registering callbacks... ");
 	register_prom_callbacks();
+	prom_printf("done.\n");
 }
 
 /* The OBP specifications for sun4u mark 0xfffffffc00000000 and
@@ -788,8 +720,8 @@ void inherit_locked_prom_mappings(int save_p)
 		}
 	}
 	if (tlb_type == spitfire) {
-		int high = SPITFIRE_HIGHEST_LOCKED_TLBENT - bigkernel;
-		for (i = 0; i < high; i++) {
+		int high = sparc64_highest_unlocked_tlb_ent;
+		for (i = 0; i <= high; i++) {
 			unsigned long data;
 
 			/* Spitfire Errata #32 workaround */
@@ -877,9 +809,9 @@ void inherit_locked_prom_mappings(int save_p)
 			}
 		}
 	} else if (tlb_type == cheetah || tlb_type == cheetah_plus) {
-		int high = CHEETAH_HIGHEST_LOCKED_TLBENT - bigkernel;
+		int high = sparc64_highest_unlocked_tlb_ent;
 
-		for (i = 0; i < high; i++) {
+		for (i = 0; i <= high; i++) {
 			unsigned long data;
 
 			data = cheetah_get_ldtlb_data(i);
@@ -1556,7 +1488,6 @@ void __init paging_init(void)
 	
 	swapper_pgd_zero = pgd_val(swapper_pg_dir[0]);
 	
-	/* Inherit non-locked OBP mappings. */
 	inherit_prom_mappings();
 	
 	/* Ok, we can use our TLB miss and window trap handlers safely.
diff --git a/arch/um/Makefile b/arch/um/Makefile
index 7af37e3..e1ffad2 100644
--- a/arch/um/Makefile
+++ b/arch/um/Makefile
@@ -152,7 +152,7 @@ archclean:
 $(SYMLINK_HEADERS):
 	@echo '  SYMLINK $@'
 ifneq ($(KBUILD_SRC),)
-	ln -fsn $(srctree)/include/asm-um/$(basename $(notdir $@))-$(SUBARCH)$(suffix $@) $@
+	$(Q)ln -fsn $(srctree)/include/asm-um/$(basename $(notdir $@))-$(SUBARCH)$(suffix $@) $@
 else
 	$(Q)cd $(TOPDIR)/$(dir $@) ; \
 	ln -sf $(basename $(notdir $@))-$(SUBARCH)$(suffix $@) $(notdir $@)
diff --git a/arch/um/drivers/Makefile b/arch/um/drivers/Makefile
index 783e18c..de17d4c 100644
--- a/arch/um/drivers/Makefile
+++ b/arch/um/drivers/Makefile
@@ -13,7 +13,7 @@ mcast-objs := mcast_kern.o mcast_user.o
 net-objs := net_kern.o net_user.o
 mconsole-objs := mconsole_kern.o mconsole_user.o
 hostaudio-objs := hostaudio_kern.o
-ubd-objs := ubd_kern.o
+ubd-objs := ubd_kern.o ubd_user.o
 port-objs := port_kern.o port_user.o
 harddog-objs := harddog_kern.o harddog_user.o
 
diff --git a/arch/um/drivers/cow.h b/arch/um/drivers/cow.h
index 4fcf3a8..dc36b22 100644
--- a/arch/um/drivers/cow.h
+++ b/arch/um/drivers/cow.h
@@ -3,15 +3,40 @@
 
 #include <asm/types.h>
 
-#if defined(__BIG_ENDIAN)
-# define ntohll(x) (x)
-# define htonll(x) (x)
-#elif defined(__LITTLE_ENDIAN)
-# define ntohll(x)  bswap_64(x)
-# define htonll(x)  bswap_64(x)
+#if defined(__KERNEL__)
+
+# include <asm/byteorder.h>
+
+# if defined(__BIG_ENDIAN)
+#	define ntohll(x) (x)
+#	define htonll(x) (x)
+# elif defined(__LITTLE_ENDIAN)
+#	define ntohll(x)  be64_to_cpu(x)
+#	define htonll(x)  cpu_to_be64(x)
+# else
+#	error "Could not determine byte order"
+# endif
+
 #else
-#error "__BYTE_ORDER not defined"
+/* For the definition of ntohl, htonl and __BYTE_ORDER */
+#include <endian.h>
+#include <netinet/in.h>
+#if defined(__BYTE_ORDER)
+
+#  if __BYTE_ORDER == __BIG_ENDIAN
+#	define ntohll(x) (x)
+#	define htonll(x) (x)
+#  elif __BYTE_ORDER == __LITTLE_ENDIAN
+#	define ntohll(x)  bswap_64(x)
+#	define htonll(x)  bswap_64(x)
+#  else
+#	error "Could not determine byte order: __BYTE_ORDER uncorrectly defined"
+#  endif
+
+#else  /* ! defined(__BYTE_ORDER) */
+#	error "Could not determine byte order: __BYTE_ORDER not defined"
 #endif
+#endif /* ! defined(__KERNEL__) */
 
 extern int init_cow_file(int fd, char *cow_file, char *backing_file,
 			 int sectorsize, int alignment, int *bitmap_offset_out,
diff --git a/arch/um/drivers/cow_user.c b/arch/um/drivers/cow_user.c
index a8ce6fc..fbe2217 100644
--- a/arch/um/drivers/cow_user.c
+++ b/arch/um/drivers/cow_user.c
@@ -9,7 +9,6 @@
 #include <sys/time.h>
 #include <sys/param.h>
 #include <sys/user.h>
-#include <netinet/in.h>
 
 #include "os.h"
 
diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c
index e77a38d..f731343 100644
--- a/arch/um/drivers/ubd_kern.c
+++ b/arch/um/drivers/ubd_kern.c
@@ -35,7 +35,6 @@
 #include "linux/blkpg.h"
 #include "linux/genhd.h"
 #include "linux/spinlock.h"
-#include "asm/atomic.h"
 #include "asm/segment.h"
 #include "asm/uaccess.h"
 #include "asm/irq.h"
@@ -54,21 +53,20 @@
 #include "mem.h"
 #include "mem_kern.h"
 #include "cow.h"
-#include "aio.h"
 
 enum ubd_req { UBD_READ, UBD_WRITE };
 
 struct io_thread_req {
-	enum aio_type op;
+	enum ubd_req op;
 	int fds[2];
 	unsigned long offsets[2];
 	unsigned long long offset;
 	unsigned long length;
 	char *buffer;
 	int sectorsize;
-	int bitmap_offset;
-	long bitmap_start;
-	long bitmap_end;
+	unsigned long sector_mask;
+	unsigned long long cow_offset;
+	unsigned long bitmap_words[2];
 	int error;
 };
 
@@ -82,31 +80,28 @@ extern int create_cow_file(char *cow_file, char *backing_file,
 			   unsigned long *bitmap_len_out,
 			   int *data_offset_out);
 extern int read_cow_bitmap(int fd, void *buf, int offset, int len);
-extern void do_io(struct io_thread_req *req, struct request *r,
-		  unsigned long *bitmap);
+extern void do_io(struct io_thread_req *req);
 
-static inline int ubd_test_bit(__u64 bit, void *data)
+static inline int ubd_test_bit(__u64 bit, unsigned char *data)
 {
-	unsigned char *buffer = data;
 	__u64 n;
 	int bits, off;
 
-	bits = sizeof(buffer[0]) * 8;
+	bits = sizeof(data[0]) * 8;
 	n = bit / bits;
 	off = bit % bits;
-	return((buffer[n] & (1 << off)) != 0);
+	return((data[n] & (1 << off)) != 0);
 }
 
-static inline void ubd_set_bit(__u64 bit, void *data)
+static inline void ubd_set_bit(__u64 bit, unsigned char *data)
 {
-	unsigned char *buffer = data;
 	__u64 n;
 	int bits, off;
 
-	bits = sizeof(buffer[0]) * 8;
+	bits = sizeof(data[0]) * 8;
 	n = bit / bits;
 	off = bit % bits;
-	buffer[n] |= (1 << off);
+	data[n] |= (1 << off);
 }
 /*End stuff from ubd_user.h*/
 
@@ -115,6 +110,8 @@ static inline void ubd_set_bit(__u64 bit, void *data)
 static DEFINE_SPINLOCK(ubd_io_lock);
 static DEFINE_SPINLOCK(ubd_lock);
 
+static void (*do_ubd)(void);
+
 static int ubd_open(struct inode * inode, struct file * filp);
 static int ubd_release(struct inode * inode, struct file * file);
 static int ubd_ioctl(struct inode * inode, struct file * file,
@@ -161,8 +158,6 @@ struct cow {
         int data_offset;
 };
 
-#define MAX_SG 64
-
 struct ubd {
 	char *file;
 	int count;
@@ -173,7 +168,6 @@ struct ubd {
 	int no_cow;
 	struct cow cow;
 	struct platform_device pdev;
-        struct scatterlist sg[MAX_SG];
 };
 
 #define DEFAULT_COW { \
@@ -466,114 +460,81 @@ __uml_help(fakehd,
 );
 
 static void do_ubd_request(request_queue_t * q);
-static int in_ubd;
+
+/* Only changed by ubd_init, which is an initcall. */
+int thread_fd = -1;
 
 /* Changed by ubd_handler, which is serialized because interrupts only
  * happen on CPU 0.
  */
 int intr_count = 0;
 
-static void ubd_end_request(struct request *req, int bytes, int uptodate)
+/* call ubd_finish if you need to serialize */
+static void __ubd_finish(struct request *req, int error)
 {
-	if (!end_that_request_first(req, uptodate, bytes >> 9)) {
-		add_disk_randomness(req->rq_disk);
-		end_that_request_last(req);
+	int nsect;
+
+	if(error){
+		end_request(req, 0);
+		return;
 	}
+	nsect = req->current_nr_sectors;
+	req->sector += nsect;
+	req->buffer += nsect << 9;
+	req->errors = 0;
+	req->nr_sectors -= nsect;
+	req->current_nr_sectors = 0;
+	end_request(req, 1);
 }
 
-/* call ubd_finish if you need to serialize */
-static void __ubd_finish(struct request *req, int bytes)
+static inline void ubd_finish(struct request *req, int error)
 {
-	if(bytes < 0){
-		ubd_end_request(req, 0, 0);
-  		return;
-  	}
-
-	ubd_end_request(req, bytes, 1);
+ 	spin_lock(&ubd_io_lock);
+	__ubd_finish(req, error);
+	spin_unlock(&ubd_io_lock);
 }
 
-static inline void ubd_finish(struct request *req, int bytes)
+/* Called without ubd_io_lock held */
+static void ubd_handler(void)
 {
-   	spin_lock(&ubd_io_lock);
-	__ubd_finish(req, bytes);
-  	spin_unlock(&ubd_io_lock);
+	struct io_thread_req req;
+	struct request *rq = elv_next_request(ubd_queue);
+	int n;
+
+	do_ubd = NULL;
+	intr_count++;
+	n = os_read_file(thread_fd, &req, sizeof(req));
+	if(n != sizeof(req)){
+		printk(KERN_ERR "Pid %d - spurious interrupt in ubd_handler, "
+		       "err = %d\n", os_getpid(), -n);
+		spin_lock(&ubd_io_lock);
+		end_request(rq, 0);
+		spin_unlock(&ubd_io_lock);
+		return;
+	}
+        
+	ubd_finish(rq, req.error);
+	reactivate_fd(thread_fd, UBD_IRQ);	
+	do_ubd_request(ubd_queue);
 }
 
-struct bitmap_io {
-        atomic_t count;
-        struct aio_context aio;
-};
-
-struct ubd_aio {
-        struct aio_context aio;
-        struct request *req;
-        int len;
-        struct bitmap_io *bitmap;
-        void *bitmap_buf;
-};
-
-static int ubd_reply_fd = -1;
-
 static irqreturn_t ubd_intr(int irq, void *dev, struct pt_regs *unused)
 {
-	struct aio_thread_reply reply;
-	struct ubd_aio *aio;
-	struct request *req;
-	int err, n, fd = (int) (long) dev;
-
-	while(1){
-		err = os_read_file(fd, &reply, sizeof(reply));
-		if(err == -EAGAIN)
-			break;
-		if(err < 0){
-			printk("ubd_aio_handler - read returned err %d\n",
-			       -err);
-			break;
-		}
-
-                aio = container_of(reply.data, struct ubd_aio, aio);
-                n = reply.err;
-
-		if(n == 0){
-			req = aio->req;
-			req->nr_sectors -= aio->len >> 9;
-
-			if((aio->bitmap != NULL) &&
-			   (atomic_dec_and_test(&aio->bitmap->count))){
-                                aio->aio = aio->bitmap->aio;
-                                aio->len = 0;
-                                kfree(aio->bitmap);
-                                aio->bitmap = NULL;
-                                submit_aio(&aio->aio);
-			}
-			else {
-				if((req->nr_sectors == 0) &&
-                                   (aio->bitmap == NULL)){
-					int len = req->hard_nr_sectors << 9;
-					ubd_finish(req, len);
-				}
-
-                                if(aio->bitmap_buf != NULL)
-                                        kfree(aio->bitmap_buf);
-				kfree(aio);
-			}
-		}
-                else if(n < 0){
-                        ubd_finish(aio->req, n);
-                        if(aio->bitmap != NULL)
-                                kfree(aio->bitmap);
-                        if(aio->bitmap_buf != NULL)
-                                kfree(aio->bitmap_buf);
-                        kfree(aio);
-                }
-	}
-	reactivate_fd(fd, UBD_IRQ);
+	ubd_handler();
+	return(IRQ_HANDLED);
+}
 
-        do_ubd_request(ubd_queue);
+/* Only changed by ubd_init, which is an initcall. */
+static int io_pid = -1;
 
-	return(IRQ_HANDLED);
+void kill_io_thread(void)
+{
+	if(io_pid != -1) 
+		os_kill_process(io_pid, 1);
 }
 
+__uml_exitcall(kill_io_thread);
+
 static int ubd_file_size(struct ubd *dev, __u64 *size_out)
 {
 	char *file;
@@ -608,7 +569,7 @@ static int ubd_open_dev(struct ubd *dev)
 				&dev->cow.data_offset, create_ptr);
 
 	if((dev->fd == -ENOENT) && create_cow){
-		dev->fd = create_cow_file(dev->file, dev->cow.file,
+		dev->fd = create_cow_file(dev->file, dev->cow.file, 
 					  dev->openflags, 1 << 9, PAGE_SIZE,
 					  &dev->cow.bitmap_offset, 
 					  &dev->cow.bitmap_len,
@@ -870,10 +831,6 @@ int ubd_init(void)
 {
         int i;
 
-	ubd_reply_fd = init_aio_irq(UBD_IRQ, "ubd", ubd_intr);
-	if(ubd_reply_fd < 0)
-		printk("Setting up ubd AIO failed, err = %d\n", ubd_reply_fd);
-
 	devfs_mk_dir("ubd");
 	if (register_blkdev(MAJOR_NR, "ubd"))
 		return -1;
@@ -884,7 +841,6 @@ int ubd_init(void)
 		return -1;
 	}
 		
-	blk_queue_max_hw_segments(ubd_queue, MAX_SG);
 	if (fake_major != MAJOR_NR) {
 		char name[sizeof("ubd_nnn\0")];
 
@@ -896,12 +852,40 @@ int ubd_init(void)
 	driver_register(&ubd_driver);
 	for (i = 0; i < MAX_DEV; i++) 
 		ubd_add(i);
-
 	return 0;
 }
 
 late_initcall(ubd_init);
 
+int ubd_driver_init(void){
+	unsigned long stack;
+	int err;
+
+	/* Set by CONFIG_BLK_DEV_UBD_SYNC or ubd=sync.*/
+	if(global_openflags.s){
+		printk(KERN_INFO "ubd: Synchronous mode\n");
+		/* Letting ubd=sync be like using ubd#s= instead of ubd#= is
+		 * enough. So use anyway the io thread. */
+	}
+	stack = alloc_stack(0, 0);
+	io_pid = start_io_thread(stack + PAGE_SIZE - sizeof(void *), 
+				 &thread_fd);
+	if(io_pid < 0){
+		printk(KERN_ERR 
+		       "ubd : Failed to start I/O thread (errno = %d) - "
+		       "falling back to synchronous I/O\n", -io_pid);
+		io_pid = -1;
+		return(0);
+	}
+	err = um_request_irq(UBD_IRQ, thread_fd, IRQ_READ, ubd_intr, 
+			     SA_INTERRUPT, "ubd", ubd_dev);
+	if(err != 0)
+		printk(KERN_ERR "um_request_irq failed - errno = %d\n", -err);
+	return(err);
+}
+
+device_initcall(ubd_driver_init);
+
 static int ubd_open(struct inode *inode, struct file *filp)
 {
 	struct gendisk *disk = inode->i_bdev->bd_disk;
@@ -939,55 +923,105 @@ static int ubd_release(struct inode * inode, struct file * file)
 	return(0);
 }
 
-static void cowify_bitmap(struct io_thread_req *req, unsigned long *bitmap)
+static void cowify_bitmap(__u64 io_offset, int length, unsigned long *cow_mask,
+			  __u64 *cow_offset, unsigned long *bitmap,
+			  __u64 bitmap_offset, unsigned long *bitmap_words,
+			  __u64 bitmap_len)
 {
-        __u64 sector = req->offset / req->sectorsize;
-        int i;
+	__u64 sector = io_offset >> 9;
+	int i, update_bitmap = 0;
+
+	for(i = 0; i < length >> 9; i++){
+		if(cow_mask != NULL)
+			ubd_set_bit(i, (unsigned char *) cow_mask);
+		if(ubd_test_bit(sector + i, (unsigned char *) bitmap))
+			continue;
 
-        for(i = 0; i < req->length / req->sectorsize; i++){
-                if(ubd_test_bit(sector + i, bitmap))
-                        continue;
+		update_bitmap = 1;
+		ubd_set_bit(sector + i, (unsigned char *) bitmap);
+	}
+
+	if(!update_bitmap)
+		return;
 
-                if(req->bitmap_start == -1)
-                        req->bitmap_start = sector + i;
-                req->bitmap_end = sector + i + 1;
+	*cow_offset = sector / (sizeof(unsigned long) * 8);
 
-                ubd_set_bit(sector + i, bitmap);
-        }
+	/* This takes care of the case where we're exactly at the end of the
+	 * device, and *cow_offset + 1 is off the end.  So, just back it up
+	 * by one word.  Thanks to Lynn Kerby for the fix and James McMechan
+	 * for the original diagnosis.
+	 */
+	if(*cow_offset == ((bitmap_len + sizeof(unsigned long) - 1) /
+			   sizeof(unsigned long) - 1))
+		(*cow_offset)--;
+
+	bitmap_words[0] = bitmap[*cow_offset];
+	bitmap_words[1] = bitmap[*cow_offset + 1];
+
+	*cow_offset *= sizeof(unsigned long);
+	*cow_offset += bitmap_offset;
+}
+
+static void cowify_req(struct io_thread_req *req, unsigned long *bitmap,
+		       __u64 bitmap_offset, __u64 bitmap_len)
+{
+	__u64 sector = req->offset >> 9;
+	int i;
+
+	if(req->length > (sizeof(req->sector_mask) * 8) << 9)
+		panic("Operation too long");
+
+	if(req->op == UBD_READ) {
+		for(i = 0; i < req->length >> 9; i++){
+			if(ubd_test_bit(sector + i, (unsigned char *) bitmap))
+				ubd_set_bit(i, (unsigned char *) 
+					    &req->sector_mask);
+                }
+	}
+	else cowify_bitmap(req->offset, req->length, &req->sector_mask,
+			   &req->cow_offset, bitmap, bitmap_offset,
+			   req->bitmap_words, bitmap_len);
 }
 
 /* Called with ubd_io_lock held */
-static int prepare_request(struct request *req, struct io_thread_req *io_req,
-                           unsigned long long offset, int page_offset,
-                           int len, struct page *page)
+static int prepare_request(struct request *req, struct io_thread_req *io_req)
 {
 	struct gendisk *disk = req->rq_disk;
 	struct ubd *dev = disk->private_data;
+	__u64 offset;
+	int len;
+
+	if(req->rq_status == RQ_INACTIVE) return(1);
 
 	/* This should be impossible now */
 	if((rq_data_dir(req) == WRITE) && !dev->openflags.w){
 		printk("Write attempted on readonly ubd device %s\n", 
 		       disk->disk_name);
-                ubd_end_request(req, 0, 0);
+		end_request(req, 0);
 		return(1);
 	}
 
+	offset = ((__u64) req->sector) << 9;
+	len = req->current_nr_sectors << 9;
+
 	io_req->fds[0] = (dev->cow.file != NULL) ? dev->cow.fd : dev->fd;
 	io_req->fds[1] = dev->fd;
+	io_req->cow_offset = -1;
 	io_req->offset = offset;
 	io_req->length = len;
 	io_req->error = 0;
-	io_req->op = (rq_data_dir(req) == READ) ? AIO_READ : AIO_WRITE;
+	io_req->sector_mask = 0;
+
+	io_req->op = (rq_data_dir(req) == READ) ? UBD_READ : UBD_WRITE;
 	io_req->offsets[0] = 0;
 	io_req->offsets[1] = dev->cow.data_offset;
-        io_req->buffer = page_address(page) + page_offset;
+	io_req->buffer = req->buffer;
 	io_req->sectorsize = 1 << 9;
-        io_req->bitmap_offset = dev->cow.bitmap_offset;
-        io_req->bitmap_start = -1;
-        io_req->bitmap_end = -1;
 
-        if((dev->cow.file != NULL) && (io_req->op == UBD_WRITE))
-                cowify_bitmap(io_req, dev->cow.bitmap);
+	if(dev->cow.file != NULL)
+		cowify_req(io_req, dev->cow.bitmap, dev->cow.bitmap_offset,
+			   dev->cow.bitmap_len);
+
 	return(0);
 }
 
@@ -996,36 +1030,30 @@ static void do_ubd_request(request_queue_t *q)
 {
 	struct io_thread_req io_req;
 	struct request *req;
-	__u64 sector;
-	int err;
-
-	if(in_ubd)
-		return;
-	in_ubd = 1;
-	while((req = elv_next_request(q)) != NULL){
-		struct gendisk *disk = req->rq_disk;
-		struct ubd *dev = disk->private_data;
-		int n, i;
-
-		blkdev_dequeue_request(req);
-
-		sector = req->sector;
-		n = blk_rq_map_sg(q, req, dev->sg);
-
-		for(i = 0; i < n; i++){
-			struct scatterlist *sg = &dev->sg[i];
-
-			err = prepare_request(req, &io_req, sector << 9,
-					      sg->offset, sg->length,
-					      sg->page);
-			if(err)
-				continue;
-
-			sector += sg->length >> 9;
-			do_io(&io_req, req, dev->cow.bitmap);
+	int err, n;
+
+	if(thread_fd == -1){
+		while((req = elv_next_request(q)) != NULL){
+			err = prepare_request(req, &io_req);
+			if(!err){
+				do_io(&io_req);
+				__ubd_finish(req, io_req.error);
+			}
+		}
+	}
+	else {
+		if(do_ubd || (req = elv_next_request(q)) == NULL)
+			return;
+		err = prepare_request(req, &io_req);
+		if(!err){
+			do_ubd = ubd_handler;
+			n = os_write_file(thread_fd, (char *) &io_req,
+					 sizeof(io_req));
+			if(n != sizeof(io_req))
+				printk("write to io thread failed, "
+				       "errno = %d\n", -n);
 		}
 	}
-	in_ubd = 0;
 }
 
 static int ubd_ioctl(struct inode * inode, struct file * file,
@@ -1241,95 +1269,131 @@ int create_cow_file(char *cow_file, char *backing_file, struct openflags flags,
 	return(err);
 }
 
-void do_io(struct io_thread_req *req, struct request *r, unsigned long *bitmap)
+static int update_bitmap(struct io_thread_req *req)
 {
-        struct ubd_aio *aio;
-        struct bitmap_io *bitmap_io = NULL;
-        char *buf;
-        void *bitmap_buf = NULL;
-        unsigned long len, sector;
-        int nsectors, start, end, bit, err;
-        __u64 off;
-
-        if(req->bitmap_start != -1){
-                /* Round up to the nearest word */
-                int round = sizeof(unsigned long);
-                len = (req->bitmap_end - req->bitmap_start +
-                       round * 8 - 1) / (round * 8);
-                len *= round;
-
-                off = req->bitmap_start / (8 * round);
-                off *= round;
-
-                bitmap_io = kmalloc(sizeof(*bitmap_io), GFP_KERNEL);
-                if(bitmap_io == NULL){
-                        printk("Failed to kmalloc bitmap IO\n");
-                        req->error = 1;
-                        return;
-                }
+	int n;
 
-                bitmap_buf = kmalloc(len, GFP_KERNEL);
-                if(bitmap_buf == NULL){
-                        printk("do_io : kmalloc of bitmap chunk "
-                               "failed\n");
-                        kfree(bitmap_io);
-                        req->error = 1;
-                        return;
-                }
-                memcpy(bitmap_buf, &bitmap[off / sizeof(bitmap[0])], len);
-
-                *bitmap_io = ((struct bitmap_io)
-                        { .count	= ATOMIC_INIT(0),
-                          .aio		= INIT_AIO(AIO_WRITE, req->fds[1],
-                                                   bitmap_buf, len,
-                                                   req->bitmap_offset + off,
-                                                   ubd_reply_fd) } );
-        }
+	if(req->cow_offset == -1)
+		return(0);
 
-        nsectors = req->length / req->sectorsize;
-        start = 0;
-        end = nsectors;
-        bit = 0;
-        do {
-                if(bitmap != NULL){
-                        sector = req->offset / req->sectorsize;
-                        bit = ubd_test_bit(sector + start, bitmap);
-                        end = start;
-                        while((end < nsectors) &&
-                              (ubd_test_bit(sector + end, bitmap) == bit))
-                                end++;
-                }
+	n = os_seek_file(req->fds[1], req->cow_offset);
+	if(n < 0){
+		printk("do_io - bitmap lseek failed : err = %d\n", -n);
+		return(1);
+	}
 
-                off = req->offsets[bit] + req->offset +
-                        start * req->sectorsize;
-                len = (end - start) * req->sectorsize;
-                buf = &req->buffer[start * req->sectorsize];
+	n = os_write_file(req->fds[1], &req->bitmap_words,
+		          sizeof(req->bitmap_words));
+	if(n != sizeof(req->bitmap_words)){
+		printk("do_io - bitmap update failed, err = %d fd = %d\n", -n,
+		       req->fds[1]);
+		return(1);
+	}
 
-                aio = kmalloc(sizeof(*aio), GFP_KERNEL);
-                if(aio == NULL){
-                        req->error = 1;
-                        return;
-                }
+	return(0);
+}
 
-                *aio = ((struct ubd_aio)
-                        { .aio		= INIT_AIO(req->op, req->fds[bit], buf,
-                                                   len, off, ubd_reply_fd),
-                          .len		= len,
-                          .req		= r,
-                          .bitmap	= bitmap_io,
-                          .bitmap_buf 	= bitmap_buf });
-
-                if(aio->bitmap != NULL)
-                        atomic_inc(&aio->bitmap->count);
-
-                err = submit_aio(&aio->aio);
-                if(err){
-                        printk("do_io - submit_aio failed, "
-                               "err = %d\n", err);
-                        req->error = 1;
-                        return;
-                }
+void do_io(struct io_thread_req *req)
+{
+	char *buf;
+	unsigned long len;
+	int n, nsectors, start, end, bit;
+	int err;
+	__u64 off;
+
+	nsectors = req->length / req->sectorsize;
+	start = 0;
+	do {
+		bit = ubd_test_bit(start, (unsigned char *) &req->sector_mask);
+		end = start;
+		while((end < nsectors) &&
+		      (ubd_test_bit(end, (unsigned char *)
+				    &req->sector_mask) == bit))
+			end++;
+
+		off = req->offset + req->offsets[bit] +
+			start * req->sectorsize;
+		len = (end - start) * req->sectorsize;
+		buf = &req->buffer[start * req->sectorsize];
+
+		err = os_seek_file(req->fds[bit], off);
+		if(err < 0){
+			printk("do_io - lseek failed : err = %d\n", -err);
+			req->error = 1;
+			return;
+		}
+		if(req->op == UBD_READ){
+			n = 0;
+			do {
+				buf = &buf[n];
+				len -= n;
+				n = os_read_file(req->fds[bit], buf, len);
+				if (n < 0) {
+					printk("do_io - read failed, err = %d "
+					       "fd = %d\n", -n, req->fds[bit]);
+					req->error = 1;
+					return;
+				}
+			} while((n < len) && (n != 0));
+			if (n < len) memset(&buf[n], 0, len - n);
+		} else {
+			n = os_write_file(req->fds[bit], buf, len);
+			if(n != len){
+				printk("do_io - write failed err = %d "
+				       "fd = %d\n", -n, req->fds[bit]);
+				req->error = 1;
+				return;
+			}
+		}
+
+		start = end;
+	} while(start < nsectors);
 
-                start = end;
-        } while(start < nsectors);
+	req->error = update_bitmap(req);
 }
+
+/* Changed in start_io_thread, which is serialized by being called only
+ * from ubd_init, which is an initcall.
+ */
+int kernel_fd = -1;
+
+/* Only changed by the io thread */
+int io_count = 0;
+
+int io_thread(void *arg)
+{
+	struct io_thread_req req;
+	int n;
+
+	ignore_sigwinch_sig();
+	while(1){
+		n = os_read_file(kernel_fd, &req, sizeof(req));
+		if(n != sizeof(req)){
+			if(n < 0)
+				printk("io_thread - read failed, fd = %d, "
+				       "err = %d\n", kernel_fd, -n);
+			else {
+				printk("io_thread - short read, fd = %d, "
+				       "length = %d\n", kernel_fd, n);
+			}
+			continue;
+		}
+		io_count++;
+		do_io(&req);
+		n = os_write_file(kernel_fd, &req, sizeof(req));
+		if(n != sizeof(req))
+			printk("io_thread - write failed, fd = %d, err = %d\n",
+			       kernel_fd, -n);
+	}
+}
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * Emacs will notice this stuff at the end of the file and automatically
+ * adjust the settings for this buffer only.  This must remain at the end
+ * of the file.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-file-style: "linux"
+ * End:
+ */
diff --git a/arch/um/drivers/ubd_user.c b/arch/um/drivers/ubd_user.c
new file mode 100644
index 0000000..b94d2bc4f
--- /dev/null
+++ b/arch/um/drivers/ubd_user.c
@@ -0,0 +1,75 @@
+/* 
+ * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
+ * Copyright (C) 2001 Ridgerun,Inc (glonnon@ridgerun.com)
+ * Licensed under the GPL
+ */
+
+#include <stddef.h>
+#include <unistd.h>
+#include <errno.h>
+#include <sched.h>
+#include <signal.h>
+#include <string.h>
+#include <netinet/in.h>
+#include <sys/time.h>
+#include <sys/socket.h>
+#include <sys/mman.h>
+#include <sys/param.h>
+#include "asm/types.h"
+#include "user_util.h"
+#include "kern_util.h"
+#include "user.h"
+#include "ubd_user.h"
+#include "os.h"
+#include "cow.h"
+
+#include <endian.h>
+#include <byteswap.h>
+
+void ignore_sigwinch_sig(void)
+{
+	signal(SIGWINCH, SIG_IGN);
+}
+
+int start_io_thread(unsigned long sp, int *fd_out)
+{
+	int pid, fds[2], err;
+
+	err = os_pipe(fds, 1, 1);
+	if(err < 0){
+		printk("start_io_thread - os_pipe failed, err = %d\n", -err);
+		goto out;
+	}
+
+	kernel_fd = fds[0];
+	*fd_out = fds[1];
+
+	pid = clone(io_thread, (void *) sp, CLONE_FILES | CLONE_VM | SIGCHLD,
+		    NULL);
+	if(pid < 0){
+		printk("start_io_thread - clone failed : errno = %d\n", errno);
+		err = -errno;
+		goto out_close;
+	}
+
+	return(pid);
+
+ out_close:
+	os_close_file(fds[0]);
+	os_close_file(fds[1]);
+	kernel_fd = -1;
+	*fd_out = -1;
+ out:
+	return(err);
+}
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * Emacs will notice this stuff at the end of the file and automatically
+ * adjust the settings for this buffer only.  This must remain at the end
+ * of the file.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-file-style: "linux"
+ * End:
+ */
diff --git a/arch/um/include/aio.h b/arch/um/include/aio.h
index 83f1687..423bae91 100644
--- a/arch/um/include/aio.h
+++ b/arch/um/include/aio.h
@@ -14,27 +14,15 @@ struct aio_thread_reply {
 };
 
 struct aio_context {
-	enum aio_type type;
-	int fd;
-	void *data;
-	int len;
-	unsigned long long offset;
 	int reply_fd;
 	struct aio_context *next;
 };
 
-#define INIT_AIO(aio_type, aio_fd, aio_data, aio_len, aio_offset, \
-		 aio_reply_fd) \
-	{ .type 	= aio_type, \
-	  .fd		= aio_fd, \
-	  .data		= aio_data, \
-	  .len		= aio_len, \
-	  .offset	= aio_offset, \
-	  .reply_fd	= aio_reply_fd }
-
 #define INIT_AIO_CONTEXT { .reply_fd	= -1, \
 			   .next	= NULL }
 
-extern int submit_aio(struct aio_context *aio);
+extern int submit_aio(enum aio_type type, int fd, char *buf, int len,
+		      unsigned long long offset, int reply_fd,
+                      struct aio_context *aio);
 
 #endif
diff --git a/arch/um/include/os.h b/arch/um/include/os.h
index 6f766e1..2e58e30 100644
--- a/arch/um/include/os.h
+++ b/arch/um/include/os.h
@@ -6,6 +6,7 @@
 #ifndef __OS_H__
 #define __OS_H__
 
+#include "uml-config.h"
 #include "asm/types.h"
 #include "../os/include/file.h"
 
@@ -159,7 +160,11 @@ extern int can_do_skas(void);
 
 /* Make sure they are clear when running in TT mode. Required by
  * SEGV_MAYBE_FIXABLE */
+#ifdef UML_CONFIG_MODE_SKAS
 #define clear_can_do_skas() do { ptrace_faultinfo = proc_mm = 0; } while (0)
+#else
+#define clear_can_do_skas() do {} while (0)
+#endif
 
 /* mem.c */
 extern int create_mem_file(unsigned long len);
diff --git a/arch/um/os-Linux/aio.c b/arch/um/os-Linux/aio.c
index f6e6402..41cfb09 100644
--- a/arch/um/os-Linux/aio.c
+++ b/arch/um/os-Linux/aio.c
@@ -6,7 +6,6 @@
 #include <stdlib.h>
 #include <unistd.h>
 #include <signal.h>
-#include <string.h>
 #include <errno.h>
 #include <sched.h>
 #include <sys/syscall.h>
@@ -17,31 +16,18 @@
 #include "user.h"
 #include "mode.h"
 
+struct aio_thread_req {
+        enum aio_type type;
+        int io_fd;
+        unsigned long long offset;
+        char *buf;
+        int len;
+        struct aio_context *aio;
+};
+
 static int aio_req_fd_r = -1;
 static int aio_req_fd_w = -1;
 
-static int update_aio(struct aio_context *aio, int res)
-{
-        if(res < 0)
-                aio->len = res;
-        else if((res == 0) && (aio->type == AIO_READ)){
-                /* This is the EOF case - we have hit the end of the file
-                 * and it ends in a partial block, so we fill the end of
-                 * the block with zeros and claim success.
-                 */
-                memset(aio->data, 0, aio->len);
-                aio->len = 0;
-        }
-        else if(res > 0){
-                aio->len -= res;
-                aio->data += res;
-                aio->offset += res;
-                return aio->len;
-        }
-
-        return 0;
-}
-
 #if defined(HAVE_AIO_ABI)
 #include <linux/aio_abi.h>
 
@@ -80,7 +66,8 @@ static long io_getevents(aio_context_t ctx_id, long min_nr, long nr,
  * that it now backs the mmapped area.
  */
 
-static int do_aio(aio_context_t ctx, struct aio_context *aio)
+static int do_aio(aio_context_t ctx, enum aio_type type, int fd, char *buf,
+                  int len, unsigned long long offset, struct aio_context *aio)
 {
         struct iocb iocb, *iocbp = &iocb;
         char c;
@@ -88,39 +75,40 @@ static int do_aio(aio_context_t ctx, struct aio_context *aio)
 
         iocb = ((struct iocb) { .aio_data 	= (unsigned long) aio,
                                 .aio_reqprio	= 0,
-                                .aio_fildes	= aio->fd,
-                                .aio_buf	= (unsigned long) aio->data,
-                                .aio_nbytes	= aio->len,
-                                .aio_offset	= aio->offset,
+                                .aio_fildes	= fd,
+                                .aio_buf	= (unsigned long) buf,
+                                .aio_nbytes	= len,
+                                .aio_offset	= offset,
                                 .aio_reserved1	= 0,
                                 .aio_reserved2	= 0,
                                 .aio_reserved3	= 0 });
 
-        switch(aio->type){
+        switch(type){
         case AIO_READ:
                 iocb.aio_lio_opcode = IOCB_CMD_PREAD;
+                err = io_submit(ctx, 1, &iocbp);
                 break;
         case AIO_WRITE:
                 iocb.aio_lio_opcode = IOCB_CMD_PWRITE;
+                err = io_submit(ctx, 1, &iocbp);
                 break;
         case AIO_MMAP:
                 iocb.aio_lio_opcode = IOCB_CMD_PREAD;
                 iocb.aio_buf = (unsigned long) &c;
                 iocb.aio_nbytes = sizeof(c);
+                err = io_submit(ctx, 1, &iocbp);
                 break;
         default:
-                printk("Bogus op in do_aio - %d\n", aio->type);
+                printk("Bogus op in do_aio - %d\n", type);
                 err = -EINVAL;
-                goto out;
+                break;
         }
 
-        err = io_submit(ctx, 1, &iocbp);
         if(err > 0)
                 err = 0;
 	else
 		err = -errno;
 
- out:
         return err;
 }
 
@@ -129,9 +117,8 @@ static aio_context_t ctx = 0;
 static int aio_thread(void *arg)
 {
         struct aio_thread_reply reply;
-        struct aio_context *aio;
         struct io_event event;
-        int err, n;
+        int err, n, reply_fd;
 
         signal(SIGWINCH, SIG_IGN);
 
@@ -144,22 +131,14 @@ static int aio_thread(void *arg)
                                "errno = %d\n", errno);
                 }
                 else {
-			/* This is safe as we've just a pointer here. */
-			aio = (struct aio_context *) (long) event.data;
-			if(update_aio(aio, event.res)){
-				do_aio(ctx, aio);
-				continue;
-			}
-
                         reply = ((struct aio_thread_reply)
-				{ .data = aio,
-				  .err	= aio->len });
-			err = os_write_file(aio->reply_fd, &reply,
-					    sizeof(reply));
+				 { .data = (void *) (long) event.data,
+				   .err	= event.res });
+			reply_fd = ((struct aio_context *) reply.data)->reply_fd;
+			err = os_write_file(reply_fd, &reply, sizeof(reply));
                         if(err != sizeof(reply))
-				printk("aio_thread - write failed, "
-				       "fd = %d, err = %d\n", aio->reply_fd,
-				       -err);
+				printk("aio_thread - write failed, fd = %d, "
+                                       "err = %d\n", aio_req_fd_r, -err);
                 }
         }
         return 0;
@@ -167,35 +146,35 @@ static int aio_thread(void *arg)
 
 #endif
 
-static int do_not_aio(struct aio_context *aio)
+static int do_not_aio(struct aio_thread_req *req)
 {
         char c;
         int err;
 
-        switch(aio->type){
+        switch(req->type){
         case AIO_READ:
-                err = os_seek_file(aio->fd, aio->offset);
+                err = os_seek_file(req->io_fd, req->offset);
                 if(err)
                         goto out;
 
-                err = os_read_file(aio->fd, aio->data, aio->len);
+                err = os_read_file(req->io_fd, req->buf, req->len);
                 break;
         case AIO_WRITE:
-                err = os_seek_file(aio->fd, aio->offset);
+                err = os_seek_file(req->io_fd, req->offset);
                 if(err)
                         goto out;
 
-                err = os_write_file(aio->fd, aio->data, aio->len);
+                err = os_write_file(req->io_fd, req->buf, req->len);
                 break;
         case AIO_MMAP:
-                err = os_seek_file(aio->fd, aio->offset);
+                err = os_seek_file(req->io_fd, req->offset);
                 if(err)
                         goto out;
 
-                err = os_read_file(aio->fd, &c, sizeof(c));
+                err = os_read_file(req->io_fd, &c, sizeof(c));
                 break;
         default:
-                printk("do_not_aio - bad request type : %d\n", aio->type);
+                printk("do_not_aio - bad request type : %d\n", req->type);
                 err = -EINVAL;
                 break;
         }
@@ -206,14 +185,14 @@ static int do_not_aio(struct aio_context *aio)
 
 static int not_aio_thread(void *arg)
 {
-        struct aio_context *aio;
+        struct aio_thread_req req;
         struct aio_thread_reply reply;
         int err;
 
         signal(SIGWINCH, SIG_IGN);
         while(1){
-                err = os_read_file(aio_req_fd_r, &aio, sizeof(aio));
-                if(err != sizeof(aio)){
+                err = os_read_file(aio_req_fd_r, &req, sizeof(req));
+                if(err != sizeof(req)){
                         if(err < 0)
                                 printk("not_aio_thread - read failed, "
                                        "fd = %d, err = %d\n", aio_req_fd_r,
@@ -224,34 +203,17 @@ static int not_aio_thread(void *arg)
                         }
                         continue;
                 }
- again:
-                err = do_not_aio(aio);
-
-                if(update_aio(aio, err))
-                        goto again;
-
-                reply = ((struct aio_thread_reply) { .data 	= aio,
-                                                     .err	= aio->len });
-                err = os_write_file(aio->reply_fd, &reply, sizeof(reply));
+                err = do_not_aio(&req);
+                reply = ((struct aio_thread_reply) { .data 	= req.aio,
+                                                     .err	= err });
+                err = os_write_file(req.aio->reply_fd, &reply, sizeof(reply));
                 if(err != sizeof(reply))
                         printk("not_aio_thread - write failed, fd = %d, "
                                "err = %d\n", aio_req_fd_r, -err);
         }
 }
 
-static int submit_aio_24(struct aio_context *aio)
-{
-        int err;
-
-        err = os_write_file(aio_req_fd_w, &aio, sizeof(aio));
-        if(err == sizeof(aio))
-                err = 0;
-
-        return err;
-}
-
 static int aio_pid = -1;
-static int (*submit_proc)(struct aio_context *aio);
 
 static int init_aio_24(void)
 {
@@ -283,33 +245,11 @@ static int init_aio_24(void)
 #endif
 	printk("2.6 host AIO support not used - falling back to I/O "
 	       "thread\n");
-
-	submit_proc = submit_aio_24;
-
         return 0;
 }
 
 #ifdef HAVE_AIO_ABI
 #define DEFAULT_24_AIO 0
-static int submit_aio_26(struct aio_context *aio)
-{
-	struct aio_thread_reply reply;
-	int err;
-
-	err = do_aio(ctx, aio);
-	if(err){
-		reply = ((struct aio_thread_reply) { .data = aio,
-					             .err  = err });
-		err = os_write_file(aio->reply_fd, &reply, sizeof(reply));
-		if(err != sizeof(reply))
-			printk("submit_aio_26 - write failed, "
-			       "fd = %d, err = %d\n", aio->reply_fd, -err);
-		else err = 0;
-	}
-
-	return err;
-}
-
 static int init_aio_26(void)
 {
         unsigned long stack;
@@ -330,22 +270,39 @@ static int init_aio_26(void)
         aio_pid = err;
 
 	printk("Using 2.6 host AIO\n");
+        return 0;
+}
+
+static int submit_aio_26(enum aio_type type, int io_fd, char *buf, int len,
+			 unsigned long long offset, struct aio_context *aio)
+{
+        struct aio_thread_reply reply;
+        int err;
 
-	submit_proc = submit_aio_26;
+        err = do_aio(ctx, type, io_fd, buf, len, offset, aio);
+        if(err){
+                reply = ((struct aio_thread_reply) { .data = aio,
+                                                     .err  = err });
+                err = os_write_file(aio->reply_fd, &reply, sizeof(reply));
+                if(err != sizeof(reply))
+                        printk("submit_aio_26 - write failed, "
+                               "fd = %d, err = %d\n", aio->reply_fd, -err);
+                else err = 0;
+        }
 
-        return 0;
+        return err;
 }
 
 #else
 #define DEFAULT_24_AIO 1
-static int submit_aio_26(struct aio_context *aio)
+static int init_aio_26(void)
 {
         return -ENOSYS;
 }
 
-static int init_aio_26(void)
+static int submit_aio_26(enum aio_type type, int io_fd, char *buf, int len,
+			 unsigned long long offset, struct aio_context *aio)
 {
-	submit_proc = submit_aio_26;
         return -ENOSYS;
 }
 #endif
@@ -412,7 +369,33 @@ static void exit_aio(void)
 
 __uml_exitcall(exit_aio);
 
-int submit_aio(struct aio_context *aio)
+static int submit_aio_24(enum aio_type type, int io_fd, char *buf, int len,
+			 unsigned long long offset, struct aio_context *aio)
 {
-	return (*submit_proc)(aio);
+        struct aio_thread_req req = { .type 		= type,
+                                      .io_fd		= io_fd,
+                                      .offset		= offset,
+                                      .buf		= buf,
+                                      .len		= len,
+                                      .aio		= aio,
+        };
+        int err;
+
+        err = os_write_file(aio_req_fd_w, &req, sizeof(req));
+        if(err == sizeof(req))
+                err = 0;
+
+        return err;
+}
+
+int submit_aio(enum aio_type type, int io_fd, char *buf, int len,
+               unsigned long long offset, int reply_fd,
+               struct aio_context *aio)
+{
+        aio->reply_fd = reply_fd;
+        if(aio_24)
+                return submit_aio_24(type, io_fd, buf, len, offset, aio);
+        else {
+                return submit_aio_26(type, io_fd, buf, len, offset, aio);
+        }
 }
diff --git a/arch/um/os-Linux/start_up.c b/arch/um/os-Linux/start_up.c
index 6af8317..b99ab41 100644
--- a/arch/um/os-Linux/start_up.c
+++ b/arch/um/os-Linux/start_up.c
@@ -143,11 +143,22 @@ static int __init skas0_cmd_param(char *str, int* add)
 	return 0;
 }
 
+/* The two __uml_setup would conflict, without this stupid alias. */
+
+static int __init mode_skas0_cmd_param(char *str, int* add)
+	__attribute__((alias("skas0_cmd_param")));
+
 __uml_setup("skas0", skas0_cmd_param,
 		"skas0\n"
 		"    Disables SKAS3 usage, so that SKAS0 is used, unless \n"
 	        "    you specify mode=tt.\n\n");
 
+__uml_setup("mode=skas0", mode_skas0_cmd_param,
+		"mode=skas0\n"
+		"    Disables SKAS3 usage, so that SKAS0 is used, unless you \n"
+		"    specify mode=tt. Note that this was recently added - on \n"
+		"    older kernels you must use simply \"skas0\".\n\n");
+
 static int force_sysemu_disabled = 0;
 
 static int __init nosysemu_cmd_param(char *str, int* add)
diff --git a/arch/um/scripts/Makefile.rules b/arch/um/scripts/Makefile.rules
index 59a1291..651d9d8 100644
--- a/arch/um/scripts/Makefile.rules
+++ b/arch/um/scripts/Makefile.rules
@@ -7,8 +7,8 @@ USER_SINGLE_OBJS := \
 USER_OBJS += $(filter %_user.o,$(obj-y) $(obj-m)  $(USER_SINGLE_OBJS))
 USER_OBJS := $(foreach file,$(USER_OBJS),$(obj)/$(file))
 
-$(USER_OBJS) : c_flags = -Wp,-MD,$(depfile) $(USER_CFLAGS) \
-	$(CFLAGS_$(notdir $@))
+$(USER_OBJS) $(USER_OBJS:.o=.i) $(USER_OBJS:.o=.s) $(USER_OBJS:.o=.lst): \
+	c_flags = -Wp,-MD,$(depfile) $(USER_CFLAGS) $(CFLAGS_$(notdir $@))
 $(USER_OBJS): cmd_checksrc =
 $(USER_OBJS): quiet_cmd_checksrc =
 $(USER_OBJS): cmd_force_checksrc =
diff --git a/arch/um/sys-x86_64/stub_segv.c b/arch/um/sys-x86_64/stub_segv.c
index 65a131b..d1e53bd 100644
--- a/arch/um/sys-x86_64/stub_segv.c
+++ b/arch/um/sys-x86_64/stub_segv.c
@@ -10,6 +10,22 @@
 #include "uml-config.h"
 #include "sysdep/sigcontext.h"
 #include "sysdep/faultinfo.h"
+#include <stddef.h>
+
+/* Copied from sys-x86_64/signal.c - Can't find an equivalent definition
+ * in the libc headers anywhere.
+ */
+struct rt_sigframe
+{
+	char *pretcode;
+	struct ucontext uc;
+	struct siginfo info;
+};
+
+/* Copied here from <linux/kernel.h> - we're userspace. */
+#define container_of(ptr, type, member) ({                   \
+	const typeof( ((type *)0)->member ) *__mptr = (ptr); \
+	(type *)( (char *)__mptr - offsetof(type,member) );})
 
 void __attribute__ ((__section__ (".__syscall_stub")))
 stub_segv_handler(int sig)
@@ -17,16 +33,19 @@ stub_segv_handler(int sig)
 	struct ucontext *uc;
 
 	__asm__("movq %%rdx, %0" : "=g" (uc) :);
-        GET_FAULTINFO_FROM_SC(*((struct faultinfo *) UML_CONFIG_STUB_DATA),
-                              &uc->uc_mcontext);
+	GET_FAULTINFO_FROM_SC(*((struct faultinfo *) UML_CONFIG_STUB_DATA),
+			      &uc->uc_mcontext);
 
-	__asm__("movq %0, %%rax ; syscall": : "g" (__NR_getpid));
+	__asm__("movq %0, %%rax ; syscall": : "g" (__NR_getpid));	
 	__asm__("movq %%rax, %%rdi ; movq %0, %%rax ; movq %1, %%rsi ;"
-		"syscall": : "g" (__NR_kill), "g" (SIGUSR1));
-	/* Two popqs to restore the stack to the state just before entering
-	 * the handler, one pops the return address, the other pops the frame
-	 * pointer.
+		"syscall": : "g" (__NR_kill), "g" (SIGUSR1) : 
+		"%rdi", "%rax", "%rsi");
+	/* sys_sigreturn expects that the stack pointer will be 8 bytes into
+	 * the signal frame.  So, we use the ucontext pointer, which we know
+	 * already, to get the signal frame pointer, and add 8 to that.
 	 */
-	__asm__("popq %%rax ; popq %%rax ; movq %0, %%rax ; syscall" : : "g"
-		(__NR_rt_sigreturn));
+	__asm__("movq %0, %%rsp": : 
+		"g" ((unsigned long) container_of(uc, struct rt_sigframe, 
+						  uc) + 8));
+	__asm__("movq %0, %%rax ; syscall" : : "g" (__NR_rt_sigreturn));
 }
diff --git a/arch/x86_64/ia32/ia32_signal.c b/arch/x86_64/ia32/ia32_signal.c
index 66e2821..0903cc1 100644
--- a/arch/x86_64/ia32/ia32_signal.c
+++ b/arch/x86_64/ia32/ia32_signal.c
@@ -425,7 +425,11 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size)
 		rsp = (unsigned long) ka->sa.sa_restorer;
 	}
 
-	return (void __user *)((rsp - frame_size) & -8UL);
+	rsp -= frame_size;
+	/* Align the stack pointer according to the i386 ABI,
+	 * i.e. so that on function entry ((sp + 4) & 15) == 0. */
+	rsp = ((rsp + 4) & -16ul) - 4;
+	return (void __user *) rsp;
 }
 
 int ia32_setup_frame(int sig, struct k_sigaction *ka,
diff --git a/arch/x86_64/kernel/setup64.c b/arch/x86_64/kernel/setup64.c
index bd33be2..7919089 100644
--- a/arch/x86_64/kernel/setup64.c
+++ b/arch/x86_64/kernel/setup64.c
@@ -87,6 +87,10 @@ void __init setup_per_cpu_areas(void)
 	int i;
 	unsigned long size;
 
+#ifdef CONFIG_HOTPLUG_CPU
+	prefill_possible_map();
+#endif
+
 	/* Copy section for each CPU (we discard the original) */
 	size = ALIGN(__per_cpu_end - __per_cpu_start, SMP_CACHE_BYTES);
 #ifdef CONFIG_MODULES
diff --git a/arch/x86_64/kernel/smpboot.c b/arch/x86_64/kernel/smpboot.c
index e12d7ba..658a81b 100644
--- a/arch/x86_64/kernel/smpboot.c
+++ b/arch/x86_64/kernel/smpboot.c
@@ -892,7 +892,7 @@ static __init void disable_smp(void)
  * those NR_CPUS, hence cpu_possible_map represents entire NR_CPUS range.
  * - Ashok Raj
  */
-static void prefill_possible_map(void)
+__init void prefill_possible_map(void)
 {
 	int i;
 	for (i = 0; i < NR_CPUS; i++)
@@ -967,10 +967,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	current_cpu_data = boot_cpu_data;
 	current_thread_info()->cpu = 0;  /* needed? */
 
-#ifdef CONFIG_HOTPLUG_CPU
-	prefill_possible_map();
-#endif
-
 	if (smp_sanity_check(max_cpus) < 0) {
 		printk(KERN_INFO "SMP disabled\n");
 		disable_smp();
diff --git a/arch/x86_64/kernel/suspend.c b/arch/x86_64/kernel/suspend.c
index ebb9abf..f066c6a 100644
--- a/arch/x86_64/kernel/suspend.c
+++ b/arch/x86_64/kernel/suspend.c
@@ -11,6 +11,8 @@
 #include <linux/smp.h>
 #include <linux/suspend.h>
 #include <asm/proto.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
 
 struct saved_context saved_context;
 
@@ -140,4 +142,129 @@ void fix_processor_context(void)
 
 }
 
+#ifdef CONFIG_SOFTWARE_SUSPEND
+/* Defined in arch/x86_64/kernel/suspend_asm.S */
+extern int restore_image(void);
 
+pgd_t *temp_level4_pgt;
+
+static void **pages;
+
+static inline void *__add_page(void)
+{
+	void **c;
+
+	c = (void **)get_usable_page(GFP_ATOMIC);
+	if (c) {
+		*c = pages;
+		pages = c;
+	}
+	return c;
+}
+
+static inline void *__next_page(void)
+{
+	void **c;
+
+	c = pages;
+	if (c) {
+		pages = *c;
+		*c = NULL;
+	}
+	return c;
+}
+
+/*
+ * Try to allocate as many usable pages as needed and daisy chain them.
+ * If one allocation fails, free the pages allocated so far
+ */
+static int alloc_usable_pages(unsigned long n)
+{
+	void *p;
+
+	pages = NULL;
+	do
+		if (!__add_page())
+			break;
+	while (--n);
+	if (n) {
+		p = __next_page();
+		while (p) {
+			free_page((unsigned long)p);
+			p = __next_page();
+		}
+		return -ENOMEM;
+	}
+	return 0;
+}
+
+static void res_phys_pud_init(pud_t *pud, unsigned long address, unsigned long end)
+{
+	long i, j;
+
+	i = pud_index(address);
+	pud = pud + i;
+	for (; i < PTRS_PER_PUD; pud++, i++) {
+		unsigned long paddr;
+		pmd_t *pmd;
+
+		paddr = address + i*PUD_SIZE;
+		if (paddr >= end)
+			break;
+
+		pmd = (pmd_t *)__next_page();
+		set_pud(pud, __pud(__pa(pmd) | _KERNPG_TABLE));
+		for (j = 0; j < PTRS_PER_PMD; pmd++, j++, paddr += PMD_SIZE) {
+			unsigned long pe;
+
+			if (paddr >= end)
+				break;
+			pe = _PAGE_NX | _PAGE_PSE | _KERNPG_TABLE | paddr;
+			pe &= __supported_pte_mask;
+			set_pmd(pmd, __pmd(pe));
+		}
+	}
+}
+
+static void set_up_temporary_mappings(void)
+{
+	unsigned long start, end, next;
+
+	temp_level4_pgt = (pgd_t *)__next_page();
+
+	/* It is safe to reuse the original kernel mapping */
+	set_pgd(temp_level4_pgt + pgd_index(__START_KERNEL_map),
+		init_level4_pgt[pgd_index(__START_KERNEL_map)]);
+
+	/* Set up the direct mapping from scratch */
+	start = (unsigned long)pfn_to_kaddr(0);
+	end = (unsigned long)pfn_to_kaddr(end_pfn);
+
+	for (; start < end; start = next) {
+		pud_t *pud = (pud_t *)__next_page();
+		next = start + PGDIR_SIZE;
+		if (next > end)
+			next = end;
+		res_phys_pud_init(pud, __pa(start), __pa(next));
+		set_pgd(temp_level4_pgt + pgd_index(start),
+			mk_kernel_pgd(__pa(pud)));
+	}
+}
+
+int swsusp_arch_resume(void)
+{
+	unsigned long n;
+
+	n = ((end_pfn << PAGE_SHIFT) + PUD_SIZE - 1) >> PUD_SHIFT;
+	n += (n + PTRS_PER_PUD - 1) / PTRS_PER_PUD + 1;
+	pr_debug("swsusp_arch_resume(): pages needed = %lu\n", n);
+	if (alloc_usable_pages(n)) {
+		free_eaten_memory();
+		return -ENOMEM;
+	}
+	/* We have got enough memory and from now on we cannot recover */
+	set_up_temporary_mappings();
+	restore_image();
+	return 0;
+}
+#endif /* CONFIG_SOFTWARE_SUSPEND */
diff --git a/arch/x86_64/kernel/suspend_asm.S b/arch/x86_64/kernel/suspend_asm.S
index 4d659e9..320b6fb 100644
--- a/arch/x86_64/kernel/suspend_asm.S
+++ b/arch/x86_64/kernel/suspend_asm.S
@@ -39,12 +39,13 @@ ENTRY(swsusp_arch_suspend)
 	call swsusp_save
 	ret
 
-ENTRY(swsusp_arch_resume)
-	/* set up cr3 */	
-	leaq	init_level4_pgt(%rip),%rax
-	subq	$__START_KERNEL_map,%rax
-	movq	%rax,%cr3
-
+ENTRY(restore_image)
+	/* switch to temporary page tables */
+	movq	$__PAGE_OFFSET, %rdx
+	movq	temp_level4_pgt(%rip), %rax
+	subq	%rdx, %rax
+	movq	%rax, %cr3
+	/* Flush TLB */
 	movq	mmu_cr4_features(%rip), %rax
 	movq	%rax, %rdx
 	andq	$~(1<<7), %rdx	# PGE
@@ -69,6 +70,10 @@ loop:
 	movq	pbe_next(%rdx), %rdx
 	jmp	loop
 done:
+	/* go back to the original page tables */
+	leaq	init_level4_pgt(%rip), %rax
+	subq	$__START_KERNEL_map, %rax
+	movq	%rax, %cr3
 	/* Flush TLB, including "global" things (vmalloc) */
 	movq	mmu_cr4_features(%rip), %rax
 	movq	%rax, %rdx
diff --git a/arch/x86_64/mm/pageattr.c b/arch/x86_64/mm/pageattr.c
index 94862e1..b90e8fe 100644
--- a/arch/x86_64/mm/pageattr.c
+++ b/arch/x86_64/mm/pageattr.c
@@ -220,8 +220,6 @@ void global_flush_tlb(void)
 	down_read(&init_mm.mmap_sem);
 	df = xchg(&df_list, NULL);
 	up_read(&init_mm.mmap_sem);
-	if (!df)
-		return;
 	flush_map((df && !df->next) ? df->address : 0);
 	for (; df; df = next_df) { 
 		next_df = df->next;