Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (45 commits) ARM: 6945/1: Add unwinding support for division functions ARM: kill pmd_off() ARM: 6944/1: mm: allow ASID 0 to be allocated to tasks ARM: 6943/1: mm: use TTBR1 instead of reserved context ID ARM: 6942/1: mm: make TTBR1 always point to swapper_pg_dir on ARMv6/7 ARM: 6941/1: cache: ensure MVA is cacheline aligned in flush_kern_dcache_area ARM: add sendmmsg syscall ARM: 6863/1: allow hotplug on msm ARM: 6832/1: mmci: support for ST-Ericsson db8500v2 ARM: 6830/1: mach-ux500: force PrimeCell revisions ARM: 6829/1: amba: make hardcoded periphid override hardware ARM: 6828/1: mach-ux500: delete SSP PrimeCell ID ARM: 6827/1: mach-netx: delete hardcoded periphid ARM: 6940/1: fiq: Briefly document driver responsibilities for suspend/resume ARM: 6938/1: fiq: Refactor {get,set}_fiq_regs() for Thumb-2 ARM: 6914/1: sparsemem: fix highmem detection when using SPARSEMEM ARM: 6913/1: sparsemem: allow pfn_valid to be overridden when using SPARSEMEM at91: drop at572d940hf support at91rm9200: introduce at91rm9200_set_type to specficy cpu package at91: drop boot_params and PLAT_PHYS_OFFSET ...
author: Linus Torvalds <torvalds@linux-foundation.org> 2011-05-27 19:51:32 -0700
committer: Linus Torvalds <torvalds@linux-foundation.org> 2011-05-27 19:51:32 -0700
commit: 2a56d2220284b0e4dd8569fa475d7053f1c40a63 (patch)
tree: 96f959486a2f31db599e5f97167074bd1ecb3dc6 /arch
parent: 46f2cc80514e389bacfb642a32a4181fa1f1d20b (diff)
parent: 239df0fd5ee25588f8a5ba7f7ee646940cc403f4 (diff)
download: op-kernel-dev-2a56d2220284b0e4dd8569fa475d7053f1c40a63.zip
op-kernel-dev-2a56d2220284b0e4dd8569fa475d7053f1c40a63.tar.gz
190 files changed, 1500 insertions, 6115 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 7275009..9adc278 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -294,6 +294,8 @@ config ARCH_AT91
 	bool "Atmel AT91"
 	select ARCH_REQUIRE_GPIOLIB
 	select HAVE_CLK
+	select CLKDEV_LOOKUP
+	select ARM_PATCH_PHYS_VIRT if MMU
 	help
 	  This enables support for systems based on the Atmel AT91RM9200,
 	  AT91SAM9 and AT91CAP9 processors.
@@ -730,16 +732,6 @@ config ARCH_S5P64X0
 	  Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440,
 	  SMDK6450.
 
-config ARCH_S5P6442
-	bool "Samsung S5P6442"
-	select CPU_V6
-	select GENERIC_GPIO
-	select HAVE_CLK
-	select ARCH_USES_GETTIMEOFFSET
-	select HAVE_S3C2410_WATCHDOG if WATCHDOG
-	help
-	  Samsung S5P6442 CPU based systems
-
 config ARCH_S5PC100
 	bool "Samsung S5PC100"
 	select GENERIC_GPIO
@@ -991,8 +983,6 @@ endif
 
 source "arch/arm/mach-s5p64x0/Kconfig"
 
-source "arch/arm/mach-s5p6442/Kconfig"
-
 source "arch/arm/mach-s5pc100/Kconfig"
 
 source "arch/arm/mach-s5pv210/Kconfig"
@@ -1399,7 +1389,6 @@ config NR_CPUS
 config HOTPLUG_CPU
 	bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
 	depends on SMP && HOTPLUG && EXPERIMENTAL
-	depends on !ARCH_MSM
 	help
 	  Say Y here to experiment with turning CPUs off and on.  CPUs
 	  can be controlled through /sys/devices/system/cpu.
@@ -1420,7 +1409,7 @@ source kernel/Kconfig.preempt
 config HZ
 	int
 	default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P64X0 || \
-		ARCH_S5P6442 || ARCH_S5PV210 || ARCH_EXYNOS4
+		ARCH_S5PV210 || ARCH_EXYNOS4
 	default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
 	default AT91_TIMER_HZ if ARCH_AT91
 	default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE
@@ -1516,6 +1505,9 @@ config ARCH_SPARSEMEM_DEFAULT
 config ARCH_SELECT_MEMORY_MODEL
 	def_bool ARCH_SPARSEMEM_ENABLE
 
+config HAVE_ARCH_PFN_VALID
+	def_bool ARCH_HAS_HOLES_MEMORYMODEL || !SPARSEMEM
+
 config HIGHMEM
 	bool "High Memory Support"
 	depends on MMU
@@ -1683,6 +1675,13 @@ endmenu
 
 menu "Boot options"
 
+config USE_OF
+	bool "Flattened Device Tree support"
+	select OF
+	select OF_EARLY_FLATTREE
+	help
+	  Include support for flattened device tree machine descriptions.
+
 # Compressed boot loader in ROM.  Yes, we really want to ask about
 # TEXT and BSS so we preserve their values in the config files.
 config ZBOOT_ROM_TEXT
@@ -2021,7 +2020,7 @@ menu "Power management options"
 source "kernel/power/Kconfig"
 
 config ARCH_SUSPEND_POSSIBLE
-	depends on !ARCH_S5P64X0 && !ARCH_S5P6442 && !ARCH_S5PC100
+	depends on !ARCH_S5P64X0 && !ARCH_S5PC100
 	depends on CPU_ARM920T || CPU_ARM926T || CPU_SA1100 || \
 		CPU_V6 || CPU_V6K || CPU_V7 || CPU_XSC3 || CPU_XSCALE
 	def_bool y
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 25750bc..f5b2b39 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -176,7 +176,6 @@ machine-$(CONFIG_ARCH_S3C2410)		:= s3c2410 s3c2400 s3c2412 s3c2416 s3c2440 s3c24
 machine-$(CONFIG_ARCH_S3C24A0)		:= s3c24a0
 machine-$(CONFIG_ARCH_S3C64XX)		:= s3c64xx
 machine-$(CONFIG_ARCH_S5P64X0)		:= s5p64x0
-machine-$(CONFIG_ARCH_S5P6442)		:= s5p6442
 machine-$(CONFIG_ARCH_S5PC100)		:= s5pc100
 machine-$(CONFIG_ARCH_S5PV210)		:= s5pv210
 machine-$(CONFIG_ARCH_EXYNOS4)		:= exynos4
diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
index ea5ee4d..4b71766 100644
--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@@ -7,7 +7,7 @@ config ARM_VIC
 config ARM_VIC_NR
 	int
 	default 4 if ARCH_S5PV210
-	default 3 if ARCH_S5P6442 || ARCH_S5PC100
+	default 3 if ARCH_S5PC100
 	default 2
 	depends on ARM_VIC
 	help
diff --git a/arch/arm/configs/at572d940hfek_defconfig b/arch/arm/configs/at572d940hfek_defconfig
deleted file mode 100644
index 1b1158a..0000000
--- a/arch/arm/configs/at572d940hfek_defconfig
+++ /dev/null
@@ -1,358 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCALVERSION="-AT572D940HF"
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_TASKSTATS=y
-CONFIG_TASK_XACCT=y
-CONFIG_TASK_IO_ACCOUNTING=y
-CONFIG_AUDIT=y
-CONFIG_CGROUPS=y
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_CGROUP_SCHED=y
-CONFIG_RT_GROUP_SCHED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT572D940HF=y
-CONFIG_MACH_AT572D940HFEB=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_CMDLINE="mem=48M console=ttyS0 initrd=0x21100000,3145728 root=/dev/ram0 rw ip=172.16.1.181"
-CONFIG_KEXEC=y
-CONFIG_FPE_NWFPE=y
-CONFIG_FPE_NWFPE_XP=y
-CONFIG_NET=y
-CONFIG_PACKET=m
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_NET_PKTGEN=m
-CONFIG_NET_TCPPROBE=m
-CONFIG_CAN=m
-CONFIG_CAN_RAW=m
-CONFIG_CAN_BCM=m
-CONFIG_CAN_VCAN=m
-CONFIG_CAN_DEBUG_DEVICES=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_CONNECTOR=m
-CONFIG_MTD=m
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=1
-CONFIG_MTD_CONCAT=m
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLOCK=m
-CONFIG_MTD_BLOCK_RO=m
-CONFIG_FTL=m
-CONFIG_NFTL=m
-CONFIG_NFTL_RW=y
-CONFIG_INFTL=m
-CONFIG_RFD_FTL=m
-CONFIG_SSFDC=m
-CONFIG_MTD_OOPS=m
-CONFIG_MTD_CFI=m
-CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_CFI_INTELEXT=m
-CONFIG_MTD_CFI_AMDSTD=m
-CONFIG_MTD_CFI_STAA=m
-CONFIG_MTD_ROM=m
-CONFIG_MTD_ABSENT=m
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=m
-CONFIG_MTD_PLATRAM=m
-CONFIG_MTD_DATAFLASH=m
-CONFIG_MTD_M25P80=m
-CONFIG_MTD_SLRAM=m
-CONFIG_MTD_PHRAM=m
-CONFIG_MTD_MTDRAM=m
-CONFIG_MTD_BLOCK2MTD=m
-CONFIG_MTD_NAND=m
-CONFIG_MTD_NAND_VERIFY_WRITE=y
-CONFIG_MTD_NAND_DISKONCHIP=m
-CONFIG_MTD_NAND_NANDSIM=m
-CONFIG_MTD_NAND_PLATFORM=m
-CONFIG_MTD_ALAUDA=m
-CONFIG_MTD_UBI=m
-CONFIG_MTD_UBI_GLUEBI=m
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_ATMEL_TCLIB=y
-CONFIG_ATMEL_SSC=m
-CONFIG_SENSORS_TSL2550=m
-CONFIG_DS1682=m
-CONFIG_RAID_ATTRS=m
-CONFIG_SCSI=m
-CONFIG_SCSI_TGT=m
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_CHR_DEV_SG=m
-CONFIG_CHR_DEV_SCH=m
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_ISCSI_ATTRS=m
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_BONDING=m
-CONFIG_MACVLAN=m
-CONFIG_EQUALIZER=m
-CONFIG_TUN=m
-CONFIG_VETH=m
-CONFIG_PHYLIB=y
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_SMSC_PHY=m
-CONFIG_BROADCOM_PHY=m
-CONFIG_ICPLUS_PHY=m
-CONFIG_MDIO_BITBANG=m
-CONFIG_NET_ETHERNET=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_USB_ZD1201=m
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_DM9601=m
-CONFIG_USB_NET_GL620A=m
-CONFIG_USB_NET_PLUSB=m
-CONFIG_USB_NET_MCS7830=m
-CONFIG_USB_NET_RNDIS_HOST=m
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_KC2190=y
-# CONFIG_USB_NET_ZAURUS is not set
-CONFIG_INPUT_MOUSEDEV=m
-CONFIG_INPUT_EVDEV=m
-CONFIG_INPUT_EVBUG=m
-CONFIG_KEYBOARD_LKKBD=m
-CONFIG_KEYBOARD_GPIO=m
-CONFIG_KEYBOARD_NEWTON=m
-CONFIG_KEYBOARD_STOWAWAY=m
-CONFIG_KEYBOARD_SUNKBD=m
-CONFIG_KEYBOARD_XTKBD=m
-CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_SERIAL=m
-CONFIG_MOUSE_APPLETOUCH=m
-CONFIG_MOUSE_VSXXXAA=m
-CONFIG_MOUSE_GPIO=m
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-CONFIG_SERIO_SERPORT=m
-CONFIG_SERIO_RAW=m
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_NONSTANDARD=y
-CONFIG_N_HDLC=m
-CONFIG_SPECIALIX=m
-CONFIG_STALDRV=y
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_IPMI_HANDLER=m
-CONFIG_IPMI_DEVICE_INTERFACE=m
-CONFIG_IPMI_SI=m
-CONFIG_IPMI_WATCHDOG=m
-CONFIG_IPMI_POWEROFF=m
-CONFIG_HW_RANDOM=y
-CONFIG_R3964=m
-CONFIG_RAW_DRIVER=m
-CONFIG_TCG_TPM=m
-CONFIG_TCG_NSC=m
-CONFIG_TCG_ATMEL=m
-CONFIG_I2C=m
-CONFIG_I2C_CHARDEV=m
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-CONFIG_SPI_BITBANG=m
-CONFIG_SPI_SPIDEV=m
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=m
-CONFIG_SND=m
-CONFIG_SND_SEQUENCER=m
-CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-# CONFIG_SND_PCM_OSS_PLUGINS is not set
-CONFIG_SND_SEQUENCER_OSS=y
-CONFIG_SND_DYNAMIC_MINORS=y
-# CONFIG_SND_VERBOSE_PROCFS is not set
-CONFIG_SND_DUMMY=m
-CONFIG_SND_VIRMIDI=m
-CONFIG_SND_USB_AUDIO=m
-CONFIG_SND_USB_CAIAQ=m
-CONFIG_SND_USB_CAIAQ_INPUT=y
-CONFIG_HID=m
-CONFIG_HIDRAW=y
-CONFIG_USB_HID=m
-CONFIG_USB_HIDDEV=y
-CONFIG_USB_KBD=m
-CONFIG_USB_MOUSE=m
-CONFIG_HID_A4TECH=m
-CONFIG_HID_APPLE=m
-CONFIG_HID_BELKIN=m
-CONFIG_HID_CHERRY=m
-CONFIG_HID_CHICONY=m
-CONFIG_HID_CYPRESS=m
-CONFIG_HID_EZKEY=m
-CONFIG_HID_GYRATION=m
-CONFIG_HID_LOGITECH=m
-CONFIG_HID_MICROSOFT=m
-CONFIG_HID_MONTEREY=m
-CONFIG_HID_PANTHERLORD=m
-CONFIG_HID_PETALYNX=m
-CONFIG_HID_SAMSUNG=m
-CONFIG_HID_SONY=m
-CONFIG_HID_SUNPLUS=m
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_DYNAMIC_MINORS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=m
-CONFIG_USB_STORAGE_DATAFAB=m
-CONFIG_USB_STORAGE_FREECOM=m
-CONFIG_USB_STORAGE_ISD200=m
-CONFIG_USB_STORAGE_USBAT=m
-CONFIG_USB_STORAGE_SDDR09=m
-CONFIG_USB_STORAGE_SDDR55=m
-CONFIG_USB_STORAGE_JUMPSHOT=m
-CONFIG_USB_STORAGE_ALAUDA=m
-CONFIG_USB_STORAGE_KARMA=m
-CONFIG_USB_LIBUSUAL=y
-CONFIG_USB_SERIAL=m
-CONFIG_USB_EZUSB=y
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_SERIAL_SPCP8X5=m
-CONFIG_USB_SERIAL_DEBUG=m
-CONFIG_USB_EMI62=m
-CONFIG_USB_EMI26=m
-CONFIG_USB_ADUTUX=m
-CONFIG_USB_TEST=m
-CONFIG_USB_GADGET=m
-CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_GADGET_DEBUG_FS=y
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_USB_MIDI_GADGET=m
-CONFIG_MMC=y
-CONFIG_SDIO_UART=m
-CONFIG_MMC_AT91=m
-CONFIG_MMC_SPI=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=m
-CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=m
-CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-CONFIG_RTC_DRV_DS1307=m
-CONFIG_RTC_DRV_DS1305=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_JBD_DEBUG=y
-CONFIG_REISERFS_FS=m
-CONFIG_REISERFS_CHECK=y
-CONFIG_REISERFS_PROC_INFO=y
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-CONFIG_INOTIFY=y
-CONFIG_FUSE_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_NTFS_FS=m
-CONFIG_NTFS_RW=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_CMODE_FAVOURLZO=y
-CONFIG_CRAMFS=m
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3_ACL=y
-CONFIG_NFSD_V4=y
-CONFIG_CIFS=m
-CONFIG_CIFS_WEAK_PW_HASH=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAC_PARTITION=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_MINIX_SUBPARTITION=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-CONFIG_LDM_PARTITION=y
-CONFIG_LDM_DEBUG=y
-CONFIG_SGI_PARTITION=y
-CONFIG_SUN_PARTITION=y
-CONFIG_NLS_DEFAULT="cp437"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=m
-CONFIG_DLM=m
-CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_UNUSED_SYMBOLS=y
-CONFIG_DEBUG_FS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
diff --git a/arch/arm/configs/at91sam9261ek_defconfig b/arch/arm/configs/at91sam9261_defconfig
index b46025b..ade6b2f 100644
--- a/arch/arm/configs/at91sam9261ek_defconfig
+++ b/arch/arm/configs/at91sam9261_defconfig
@@ -1,9 +1,13 @@
 CONFIG_EXPERIMENTAL=y
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_KERNEL_LZMA=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
+CONFIG_NAMESPACES=y
+CONFIG_EMBEDDED=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
@@ -15,18 +19,27 @@ CONFIG_ARCH_AT91SAM9261=y
 CONFIG_MACH_AT91SAM9261EK=y
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 # CONFIG_ARM_THUMB is not set
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
+CONFIG_AUTO_ZRELADDR=y
+CONFIG_VFP=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
 CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
+CONFIG_CFG80211=y
+CONFIG_LIB80211=y
+CONFIG_MAC80211=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
 CONFIG_MTD_PARTITIONS=y
@@ -34,8 +47,12 @@ CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_GLUEBI=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_TCLIB=y
 CONFIG_ATMEL_SSC=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
@@ -45,12 +62,27 @@ CONFIG_NET_ETHERNET=y
 CONFIG_DM9000=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
+CONFIG_USB_ZD1201=m
+CONFIG_RTL8187=m
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_SDIO=m
+CONFIG_LIBERTAS_SPI=m
+CONFIG_RT2X00=m
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_ZD1211RW=m
+CONFIG_INPUT_POLLDEV=m
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=240
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
+CONFIG_INPUT_EVDEV=y
 # CONFIG_KEYBOARD_ATKBD is not set
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
 CONFIG_HW_RANDOM=y
@@ -65,31 +97,62 @@ CONFIG_WATCHDOG_NOWAYOUT=y
 CONFIG_AT91SAM9X_WATCHDOG=y
 CONFIG_FB=y
 CONFIG_FB_ATMEL=y
-# CONFIG_VGA_CONSOLE is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_ATMEL_LCDC=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_LOGO=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SEQUENCER=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+CONFIG_SND_AT73C213=y
+CONFIG_SND_USB_AUDIO=m
 # CONFIG_USB_HID is not set
 CONFIG_USB=y
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_STORAGE=y
-CONFIG_USB_STORAGE_DEBUG=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 CONFIG_MMC=y
 CONFIG_MMC_AT91=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AT91SAM9=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
+CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_SQUASHFS=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_ROOT_NFS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
+CONFIG_NLS_ISO8859_15=y
+CONFIG_NLS_UTF8=y
+CONFIG_FTRACE=y
+CONFIG_CRC_CCITT=m
diff --git a/arch/arm/configs/at91sam9263ek_defconfig b/arch/arm/configs/at91sam9263_defconfig
index 8a04d6f..1cf9626 100644
--- a/arch/arm/configs/at91sam9263ek_defconfig
+++ b/arch/arm/configs/at91sam9263_defconfig
@@ -1,9 +1,13 @@
 CONFIG_EXPERIMENTAL=y
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_KERNEL_LZMA=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
+CONFIG_NAMESPACES=y
+CONFIG_EMBEDDED=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
@@ -13,53 +17,81 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91SAM9263=y
 CONFIG_MACH_AT91SAM9263EK=y
+CONFIG_MACH_USB_A9263=y
+CONFIG_MACH_NEOCORE926=y
 CONFIG_MTD_AT91_DATAFLASH_CARD=y
 # CONFIG_ARM_THUMB is not set
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
+CONFIG_AUTO_ZRELADDR=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
+CONFIG_NET_KEY=y
 CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_ROUTE_VERBOSE=y
 CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
+CONFIG_IPV6=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
+CONFIG_NFTL=y
+CONFIG_NFTL_RW=y
 CONFIG_MTD_DATAFLASH=y
+CONFIG_MTD_BLOCK2MTD=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_GLUEBI=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_ATMEL_SSC=y
+CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_PWM=y
+CONFIG_ATMEL_TCLIB=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+CONFIG_SMSC_PHY=y
+CONFIG_NET_ETHERNET=y
 CONFIG_MACB=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_USB_ZD1201=m
+CONFIG_INPUT_POLLDEV=m
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=240
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
 CONFIG_INPUT_EVDEV=y
 # CONFIG_KEYBOARD_ATKBD is not set
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_SERIO is not set
+CONFIG_LEGACY_PTY_COUNT=4
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
 CONFIG_HW_RANDOM=y
@@ -74,8 +106,25 @@ CONFIG_WATCHDOG_NOWAYOUT=y
 CONFIG_AT91SAM9X_WATCHDOG=y
 CONFIG_FB=y
 CONFIG_FB_ATMEL=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_ATMEL_LCDC=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_LOGO=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SEQUENCER=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+CONFIG_SND_ATMEL_AC97C=y
+# CONFIG_SND_SPI is not set
+CONFIG_SND_USB_AUDIO=m
 CONFIG_USB=y
 CONFIG_USB_DEVICEFS=y
 CONFIG_USB_MON=y
@@ -83,24 +132,37 @@ CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 CONFIG_MMC=y
+CONFIG_SDIO_UART=m
 CONFIG_MMC_AT91=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_ATMEL_PWM=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AT91SAM9=y
 CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
+CONFIG_FUSE_FS=m
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
 CONFIG_CRAMFS=y
 CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_KERNEL=y
+CONFIG_FTRACE=y
 CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
+CONFIG_XZ_DEC=y
diff --git a/arch/arm/configs/exynos4_defconfig b/arch/arm/configs/exynos4_defconfig
index 2ffba24..da53ff3 100644
--- a/arch/arm/configs/exynos4_defconfig
+++ b/arch/arm/configs/exynos4_defconfig
@@ -8,7 +8,9 @@ CONFIG_ARCH_EXYNOS4=y
 CONFIG_S3C_LOWLEVEL_UART_PORT=1
 CONFIG_MACH_SMDKC210=y
 CONFIG_MACH_SMDKV310=y
+CONFIG_MACH_ARMLEX4210=y
 CONFIG_MACH_UNIVERSAL_C210=y
+CONFIG_MACH_NURI=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_SMP=y
diff --git a/arch/arm/configs/neocore926_defconfig b/arch/arm/configs/neocore926_defconfig
deleted file mode 100644
index 462dd18..0000000
--- a/arch/arm/configs/neocore926_defconfig
+++ /dev/null
@@ -1,104 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9263=y
-CONFIG_MACH_NEOCORE926=y
-CONFIG_MTD_AT91_DATAFLASH_CARD=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=y
-# CONFIG_INET_LRO is not set
-CONFIG_IPV6=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_NFTL=y
-CONFIG_NFTL_RW=y
-CONFIG_MTD_BLOCK2MTD=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC_SMC=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_PLATFORM=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_ATMEL_PWM=y
-CONFIG_ATMEL_TCLIB=y
-CONFIG_SCSI=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MACB=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_NONSTANDARD=y
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_PDC is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-# CONFIG_HWMON is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-CONFIG_FB=y
-CONFIG_FB_ATMEL=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_ATMEL_LCDC=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_LOGO=y
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=y
-CONFIG_SDIO_UART=y
-CONFIG_MMC_AT91=m
-CONFIG_EXT2_FS=y
-# CONFIG_DNOTIFY is not set
-CONFIG_AUTOFS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_WBUF_VERIFY=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_CRYPTO_HW is not set
diff --git a/arch/arm/configs/s5p6442_defconfig b/arch/arm/configs/s5p6442_defconfig
deleted file mode 100644
index 0e92a78..0000000
--- a/arch/arm/configs/s5p6442_defconfig
+++ /dev/null
@@ -1,65 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_S5P6442=y
-CONFIG_S3C_LOWLEVEL_UART_PORT=1
-CONFIG_MACH_SMDK6442=y
-CONFIG_CPU_32v6K=y
-CONFIG_AEABI=y
-CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
-CONFIG_FPE_NWFPE=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_HW_RANDOM=y
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CRAMFS=y
-CONFIG_ROMFS_FS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_ARM_UNWIND is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_S3C_UART=1
-CONFIG_CRC_CCITT=y
diff --git a/arch/arm/configs/usb-a9263_defconfig b/arch/arm/configs/usb-a9263_defconfig
deleted file mode 100644
index ee82d09..0000000
--- a/arch/arm/configs/usb-a9263_defconfig
+++ /dev/null
@@ -1,106 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9263=y
-CONFIG_MACH_USB_A9263=y
-CONFIG_AT91_SLOW_CLOCK=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_MACB=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_EVBUG=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_FUSE_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-# CONFIG_CRYPTO_HW is not set
diff --git a/arch/arm/include/asm/fiq.h b/arch/arm/include/asm/fiq.h
index 2242ce2..d493d0b 100644
--- a/arch/arm/include/asm/fiq.h
+++ b/arch/arm/include/asm/fiq.h
@@ -4,6 +4,13 @@
  * Support for FIQ on ARM architectures.
  * Written by Philip Blundell <philb@gnu.org>, 1998
  * Re-written by Russell King
+ *
+ * NOTE: The FIQ mode registers are not magically preserved across
+ * suspend/resume.
+ *
+ * Drivers which require these registers to be preserved across power
+ * management operations must implement appropriate suspend/resume handlers to
+ * save and restore them.
  */
 
 #ifndef __ASM_FIQ_H
@@ -29,9 +36,21 @@ struct fiq_handler {
 extern int claim_fiq(struct fiq_handler *f);
 extern void release_fiq(struct fiq_handler *f);
 extern void set_fiq_handler(void *start, unsigned int length);
-extern void set_fiq_regs(struct pt_regs *regs);
-extern void get_fiq_regs(struct pt_regs *regs);
 extern void enable_fiq(int fiq);
 extern void disable_fiq(int fiq);
 
+/* helpers defined in fiqasm.S: */
+extern void __set_fiq_regs(unsigned long const *regs);
+extern void __get_fiq_regs(unsigned long *regs);
+
+static inline void set_fiq_regs(struct pt_regs const *regs)
+{
+	__set_fiq_regs(&regs->ARM_r8);
+}
+
+static inline void get_fiq_regs(struct pt_regs *regs)
+{
+	__get_fiq_regs(&regs->ARM_r8);
+}
+
 #endif
diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h
index bf13b81..946f4d7 100644
--- a/arch/arm/include/asm/mach/arch.h
+++ b/arch/arm/include/asm/mach/arch.h
@@ -18,6 +18,8 @@ struct machine_desc {
 	unsigned int		nr;		/* architecture number	*/
 	const char		*name;		/* architecture name	*/
 	unsigned long		boot_params;	/* tagged list		*/
+	const char		**dt_compat;	/* array of device tree
+						 * 'compatible' strings	*/
 
 	unsigned int		nr_irqs;	/* number of IRQs */
 
@@ -48,6 +50,13 @@ struct machine_desc {
 extern struct machine_desc *machine_desc;
 
 /*
+ * Machine type table - also only accessible during boot
+ */
+extern struct machine_desc __arch_info_begin[], __arch_info_end[];
+#define for_each_machine_desc(p)			\
+	for (p = __arch_info_begin; p < __arch_info_end; p++)
+
+/*
  * Set of macros to define architecture features.  This is built into
  * a table by the linker.
  */
diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h
index f51a695..ac75d08 100644
--- a/arch/arm/include/asm/page.h
+++ b/arch/arm/include/asm/page.h
@@ -197,7 +197,7 @@ typedef unsigned long pgprot_t;
 
 typedef struct page *pgtable_t;
 
-#ifndef CONFIG_SPARSEMEM
+#ifdef CONFIG_HAVE_ARCH_PFN_VALID
 extern int pfn_valid(unsigned long);
 #endif
 
diff --git a/arch/arm/include/asm/prom.h b/arch/arm/include/asm/prom.h
new file mode 100644
index 0000000..11b8708
--- /dev/null
+++ b/arch/arm/include/asm/prom.h
@@ -0,0 +1,37 @@
+/*
+ *  arch/arm/include/asm/prom.h
+ *
+ *  Copyright (C) 2009 Canonical Ltd. <jeremy.kerr@canonical.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef __ASMARM_PROM_H
+#define __ASMARM_PROM_H
+
+#ifdef CONFIG_OF
+
+#include <asm/setup.h>
+#include <asm/irq.h>
+
+static inline void irq_dispose_mapping(unsigned int virq)
+{
+	return;
+}
+
+extern struct machine_desc *setup_machine_fdt(unsigned int dt_phys);
+extern void arm_dt_memblock_reserve(void);
+
+#else /* CONFIG_OF */
+
+static inline struct machine_desc *setup_machine_fdt(unsigned int dt_phys)
+{
+	return NULL;
+}
+
+static inline void arm_dt_memblock_reserve(void) { }
+
+#endif /* CONFIG_OF */
+#endif /* ASMARM_PROM_H */
diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h
index 95176af..ee2ad8a 100644
--- a/arch/arm/include/asm/setup.h
+++ b/arch/arm/include/asm/setup.h
@@ -217,6 +217,10 @@ extern struct meminfo meminfo;
 #define bank_phys_end(bank)	((bank)->start + (bank)->size)
 #define bank_phys_size(bank)	(bank)->size
 
+extern int arm_add_memory(phys_addr_t start, unsigned long size);
+extern void early_print(const char *str, ...);
+extern void dump_machine_table(void);
+
 #endif  /*  __KERNEL__  */
 
 #endif
diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h
index d2b514f..e42d96a 100644
--- a/arch/arm/include/asm/smp.h
+++ b/arch/arm/include/asm/smp.h
@@ -70,6 +70,7 @@ extern void platform_smp_prepare_cpus(unsigned int);
  */
 struct secondary_data {
 	unsigned long pgdir;
+	unsigned long swapper_pg_dir;
 	void *stack;
 };
 extern struct secondary_data secondary_data;
diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h
index 87dbe3e..3de689a 100644
--- a/arch/arm/include/asm/unistd.h
+++ b/arch/arm/include/asm/unistd.h
@@ -400,6 +400,7 @@
 #define __NR_open_by_handle_at		(__NR_SYSCALL_BASE+371)
 #define __NR_clock_adjtime		(__NR_SYSCALL_BASE+372)
 #define __NR_syncfs			(__NR_SYSCALL_BASE+373)
+#define __NR_sendmmsg			(__NR_SYSCALL_BASE+374)
 
 /*
  * The following SWIs are ARM private.
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 8d95446..a5b31af 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -24,7 +24,7 @@ obj-$(CONFIG_OC_ETM)		+= etm.o
 
 obj-$(CONFIG_ISA_DMA_API)	+= dma.o
 obj-$(CONFIG_ARCH_ACORN)	+= ecard.o 
-obj-$(CONFIG_FIQ)		+= fiq.o
+obj-$(CONFIG_FIQ)		+= fiq.o fiqasm.o
 obj-$(CONFIG_MODULES)		+= armksyms.o module.o
 obj-$(CONFIG_ARTHUR)		+= arthur.o
 obj-$(CONFIG_ISA_DMA)		+= dma-isa.o
@@ -44,6 +44,7 @@ obj-$(CONFIG_ARM_THUMBEE)	+= thumbee.o
 obj-$(CONFIG_KGDB)		+= kgdb.o
 obj-$(CONFIG_ARM_UNWIND)	+= unwind.o
 obj-$(CONFIG_HAVE_TCM)		+= tcm.o
+obj-$(CONFIG_OF)		+= devtree.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
 obj-$(CONFIG_SWP_EMULATE)	+= swp_emulate.o
 CFLAGS_swp_emulate.o		:= -Wa,-march=armv7-a
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index 7fbf28c..24cdac3 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -383,6 +383,7 @@
 		CALL(sys_open_by_handle_at)
 		CALL(sys_clock_adjtime)
 		CALL(sys_syncfs)
+		CALL(sys_sendmmsg)
 #ifndef syscalls_counted
 .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
 #define syscalls_counted
diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c
new file mode 100644
index 0000000..a701e42
--- /dev/null
+++ b/arch/arm/kernel/devtree.c
@@ -0,0 +1,145 @@
+/*
+ *  linux/arch/arm/kernel/devtree.c
+ *
+ *  Copyright (C) 2009 Canonical Ltd. <jeremy.kerr@canonical.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/bootmem.h>
+#include <linux/memblock.h>
+#include <linux/of.h>
+#include <linux/of_fdt.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+
+#include <asm/setup.h>
+#include <asm/page.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+void __init early_init_dt_add_memory_arch(u64 base, u64 size)
+{
+	arm_add_memory(base, size);
+}
+
+void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
+{
+	return alloc_bootmem_align(size, align);
+}
+
+void __init arm_dt_memblock_reserve(void)
+{
+	u64 *reserve_map, base, size;
+
+	if (!initial_boot_params)
+		return;
+
+	/* Reserve the dtb region */
+	memblock_reserve(virt_to_phys(initial_boot_params),
+			 be32_to_cpu(initial_boot_params->totalsize));
+
+	/*
+	 * Process the reserve map.  This will probably overlap the initrd
+	 * and dtb locations which are already reserved, but overlaping
+	 * doesn't hurt anything
+	 */
+	reserve_map = ((void*)initial_boot_params) +
+			be32_to_cpu(initial_boot_params->off_mem_rsvmap);
+	while (1) {
+		base = be64_to_cpup(reserve_map++);
+		size = be64_to_cpup(reserve_map++);
+		if (!size)
+			break;
+		memblock_reserve(base, size);
+	}
+}
+
+/**
+ * setup_machine_fdt - Machine setup when an dtb was passed to the kernel
+ * @dt_phys: physical address of dt blob
+ *
+ * If a dtb was passed to the kernel in r2, then use it to choose the
+ * correct machine_desc and to setup the system.
+ */
+struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys)
+{
+	struct boot_param_header *devtree;
+	struct machine_desc *mdesc, *mdesc_best = NULL;
+	unsigned int score, mdesc_score = ~1;
+	unsigned long dt_root;
+	const char *model;
+
+	devtree = phys_to_virt(dt_phys);
+
+	/* check device tree validity */
+	if (be32_to_cpu(devtree->magic) != OF_DT_HEADER)
+		return NULL;
+
+	/* Search the mdescs for the 'best' compatible value match */
+	initial_boot_params = devtree;
+	dt_root = of_get_flat_dt_root();
+	for_each_machine_desc(mdesc) {
+		score = of_flat_dt_match(dt_root, mdesc->dt_compat);
+		if (score > 0 && score < mdesc_score) {
+			mdesc_best = mdesc;
+			mdesc_score = score;
+		}
+	}
+	if (!mdesc_best) {
+		const char *prop;
+		long size;
+
+		early_print("\nError: unrecognized/unsupported "
+			    "device tree compatible list:\n[ ");
+
+		prop = of_get_flat_dt_prop(dt_root, "compatible", &size);
+		while (size > 0) {
+			early_print("'%s' ", prop);
+			size -= strlen(prop) + 1;
+			prop += strlen(prop) + 1;
+		}
+		early_print("]\n\n");
+
+		dump_machine_table(); /* does not return */
+	}
+
+	model = of_get_flat_dt_prop(dt_root, "model", NULL);
+	if (!model)
+		model = of_get_flat_dt_prop(dt_root, "compatible", NULL);
+	if (!model)
+		model = "<unknown>";
+	pr_info("Machine: %s, model: %s\n", mdesc_best->name, model);
+
+	/* Retrieve various information from the /chosen node */
+	of_scan_flat_dt(early_init_dt_scan_chosen, boot_command_line);
+	/* Initialize {size,address}-cells info */
+	of_scan_flat_dt(early_init_dt_scan_root, NULL);
+	/* Setup memory, calling early_init_dt_add_memory_arch */
+	of_scan_flat_dt(early_init_dt_scan_memory, NULL);
+
+	/* Change machine number to match the mdesc we're using */
+	__machine_arch_type = mdesc_best->nr;
+
+	return mdesc_best;
+}
+
+/**
+ * irq_create_of_mapping - Hook to resolve OF irq specifier into a Linux irq#
+ *
+ * Currently the mapping mechanism is trivial; simple flat hwirq numbers are
+ * mapped 1:1 onto Linux irq numbers.  Cascaded irq controllers are not
+ * supported.
+ */
+unsigned int irq_create_of_mapping(struct device_node *controller,
+				   const u32 *intspec, unsigned int intsize)
+{
+	return intspec[0];
+}
+EXPORT_SYMBOL_GPL(irq_create_of_mapping);
diff --git a/arch/arm/kernel/fiq.c b/arch/arm/kernel/fiq.c
index e72dc34..4c164ec 100644
--- a/arch/arm/kernel/fiq.c
+++ b/arch/arm/kernel/fiq.c
@@ -89,47 +89,6 @@ void set_fiq_handler(void *start, unsigned int length)
 		flush_icache_range(0x1c, 0x1c + length);
 }
 
-/*
- * Taking an interrupt in FIQ mode is death, so both these functions
- * disable irqs for the duration.  Note - these functions are almost
- * entirely coded in assembly.
- */
-void __naked set_fiq_regs(struct pt_regs *regs)
-{
-	register unsigned long tmp;
-	asm volatile (
-	"mov	ip, sp\n\
-	stmfd	sp!, {fp, ip, lr, pc}\n\
-	sub	fp, ip, #4\n\
-	mrs	%0, cpsr\n\
-	msr	cpsr_c, %2	@ select FIQ mode\n\
-	mov	r0, r0\n\
-	ldmia	%1, {r8 - r14}\n\
-	msr	cpsr_c, %0	@ return to SVC mode\n\
-	mov	r0, r0\n\
-	ldmfd	sp, {fp, sp, pc}"
-	: "=&r" (tmp)
-	: "r" (&regs->ARM_r8), "I" (PSR_I_BIT | PSR_F_BIT | FIQ_MODE));
-}
-
-void __naked get_fiq_regs(struct pt_regs *regs)
-{
-	register unsigned long tmp;
-	asm volatile (
-	"mov	ip, sp\n\
-	stmfd	sp!, {fp, ip, lr, pc}\n\
-	sub	fp, ip, #4\n\
-	mrs	%0, cpsr\n\
-	msr	cpsr_c, %2	@ select FIQ mode\n\
-	mov	r0, r0\n\
-	stmia	%1, {r8 - r14}\n\
-	msr	cpsr_c, %0	@ return to SVC mode\n\
-	mov	r0, r0\n\
-	ldmfd	sp, {fp, sp, pc}"
-	: "=&r" (tmp)
-	: "r" (&regs->ARM_r8), "I" (PSR_I_BIT | PSR_F_BIT | FIQ_MODE));
-}
-
 int claim_fiq(struct fiq_handler *f)
 {
 	int ret = 0;
@@ -174,8 +133,8 @@ void disable_fiq(int fiq)
 }
 
 EXPORT_SYMBOL(set_fiq_handler);
-EXPORT_SYMBOL(set_fiq_regs);
-EXPORT_SYMBOL(get_fiq_regs);
+EXPORT_SYMBOL(__set_fiq_regs);	/* defined in fiqasm.S */
+EXPORT_SYMBOL(__get_fiq_regs);	/* defined in fiqasm.S */
 EXPORT_SYMBOL(claim_fiq);
 EXPORT_SYMBOL(release_fiq);
 EXPORT_SYMBOL(enable_fiq);
diff --git a/arch/arm/kernel/fiqasm.S b/arch/arm/kernel/fiqasm.S
new file mode 100644
index 0000000..207f9d6
--- /dev/null
+++ b/arch/arm/kernel/fiqasm.S
@@ -0,0 +1,49 @@
+/*
+ *  linux/arch/arm/kernel/fiqasm.S
+ *
+ *  Derived from code originally in linux/arch/arm/kernel/fiq.c:
+ *
+ *  Copyright (C) 1998 Russell King
+ *  Copyright (C) 1998, 1999 Phil Blundell
+ *  Copyright (C) 2011, Linaro Limited
+ *
+ *  FIQ support written by Philip Blundell <philb@gnu.org>, 1998.
+ *
+ *  FIQ support re-written by Russell King to be more generic
+ *
+ *  v7/Thumb-2 compatibility modifications by Linaro Limited, 2011.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * Taking an interrupt in FIQ mode is death, so both these functions
+ * disable irqs for the duration.
+ */
+
+ENTRY(__set_fiq_regs)
+	mov	r2, #PSR_I_BIT | PSR_F_BIT | FIQ_MODE
+	mrs	r1, cpsr
+	msr	cpsr_c, r2	@ select FIQ mode
+	mov	r0, r0		@ avoid hazard prior to ARMv4
+	ldmia	r0!, {r8 - r12}
+	ldr	sp, [r0], #4
+	ldr	lr, [r0]
+	msr	cpsr_c, r1	@ return to SVC mode
+	mov	r0, r0		@ avoid hazard prior to ARMv4
+	mov	pc, lr
+ENDPROC(__set_fiq_regs)
+
+ENTRY(__get_fiq_regs)
+	mov	r2, #PSR_I_BIT | PSR_F_BIT | FIQ_MODE
+	mrs	r1, cpsr
+	msr	cpsr_c, r2	@ select FIQ mode
+	mov	r0, r0		@ avoid hazard prior to ARMv4
+	stmia	r0!, {r8 - r12}
+	str	sp, [r0], #4
+	str	lr, [r0]
+	msr	cpsr_c, r1	@ return to SVC mode
+	mov	r0, r0		@ avoid hazard prior to ARMv4
+	mov	pc, lr
+ENDPROC(__get_fiq_regs)
diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S
index c84b57d..854bd22 100644
--- a/arch/arm/kernel/head-common.S
+++ b/arch/arm/kernel/head-common.S
@@ -15,6 +15,12 @@
 #define ATAG_CORE_SIZE ((2*4 + 3*4) >> 2)
 #define ATAG_CORE_SIZE_EMPTY ((2*4) >> 2)
 
+#ifdef CONFIG_CPU_BIG_ENDIAN
+#define OF_DT_MAGIC 0xd00dfeed
+#else
+#define OF_DT_MAGIC 0xedfe0dd0 /* 0xd00dfeed in big-endian */
+#endif
+
 /*
  * Exception handling.  Something went wrong and we can't proceed.  We
  * ought to tell the user, but since we don't have any guarantee that
@@ -28,20 +34,26 @@
 
 /* Determine validity of the r2 atags pointer.  The heuristic requires
  * that the pointer be aligned, in the first 16k of physical RAM and
- * that the ATAG_CORE marker is first and present.  Future revisions
+ * that the ATAG_CORE marker is first and present.  If CONFIG_OF_FLATTREE
+ * is selected, then it will also accept a dtb pointer.  Future revisions
  * of this function may be more lenient with the physical address and
  * may also be able to move the ATAGS block if necessary.
  *
  * Returns:
- *  r2 either valid atags pointer, or zero
+ *  r2 either valid atags pointer, valid dtb pointer, or zero
  *  r5, r6 corrupted
  */
 __vet_atags:
 	tst	r2, #0x3			@ aligned?
 	bne	1f
 
-	ldr	r5, [r2, #0]			@ is first tag ATAG_CORE?
-	cmp	r5, #ATAG_CORE_SIZE
+	ldr	r5, [r2, #0]
+#ifdef CONFIG_OF_FLATTREE
+	ldr	r6, =OF_DT_MAGIC		@ is it a DTB?
+	cmp	r5, r6
+	beq	2f
+#endif
+	cmp	r5, #ATAG_CORE_SIZE		@ is first tag ATAG_CORE?
 	cmpne	r5, #ATAG_CORE_SIZE_EMPTY
 	bne	1f
 	ldr	r5, [r2, #4]
@@ -49,7 +61,7 @@ __vet_atags:
 	cmp	r5, r6
 	bne	1f
 
-	mov	pc, lr				@ atag pointer is ok
+2:	mov	pc, lr				@ atag/dtb pointer is ok
 
 1:	mov	r2, #0
 	mov	pc, lr
@@ -61,7 +73,7 @@ ENDPROC(__vet_atags)
  *
  *  r0  = cp#15 control register
  *  r1  = machine ID
- *  r2  = atags pointer
+ *  r2  = atags/dtb pointer
  *  r9  = processor ID
  */
 	__INIT
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index c9173cf..278c1b0 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -59,7 +59,7 @@
  *
  * This is normally called from the decompressor code.  The requirements
  * are: MMU = off, D-cache = off, I-cache = dont care, r0 = 0,
- * r1 = machine nr, r2 = atags pointer.
+ * r1 = machine nr, r2 = atags or dtb pointer.
  *
  * This code is mostly position independent, so if you link the kernel at
  * 0xc0008000, you call this at __pa(0xc0008000).
@@ -91,7 +91,7 @@ ENTRY(stext)
 #endif
 
 	/*
-	 * r1 = machine no, r2 = atags,
+	 * r1 = machine no, r2 = atags or dtb,
 	 * r8 = phys_offset, r9 = cpuid, r10 = procinfo
 	 */
 	bl	__vet_atags
@@ -113,6 +113,7 @@ ENTRY(stext)
 	ldr	r13, =__mmap_switched		@ address to jump to after
 						@ mmu has been enabled
 	adr	lr, BSYM(1f)			@ return (PIC) address
+	mov	r8, r4				@ set TTBR1 to swapper_pg_dir
  ARM(	add	pc, r10, #PROCINFO_INITFUNC	)
  THUMB(	add	r12, r10, #PROCINFO_INITFUNC	)
  THUMB(	mov	pc, r12				)
@@ -302,8 +303,10 @@ ENTRY(secondary_startup)
 	 */
 	adr	r4, __secondary_data
 	ldmia	r4, {r5, r7, r12}		@ address to jump to after
-	sub	r4, r4, r5			@ mmu has been enabled
-	ldr	r4, [r7, r4]			@ get secondary_data.pgdir
+	sub	lr, r4, r5			@ mmu has been enabled
+	ldr	r4, [r7, lr]			@ get secondary_data.pgdir
+	add	r7, r7, #4
+	ldr	r8, [r7, lr]			@ get secondary_data.swapper_pg_dir
 	adr	lr, BSYM(__enable_mmu)		@ return address
 	mov	r13, r12			@ __secondary_switched address
  ARM(	add	pc, r10, #PROCINFO_INITFUNC	) @ initialise processor
@@ -339,7 +342,7 @@ __secondary_data:
  *
  *  r0  = cp#15 control register
  *  r1  = machine ID
- *  r2  = atags pointer
+ *  r2  = atags or dtb pointer
  *  r4  = page table pointer
  *  r9  = processor ID
  *  r13 = *virtual* address to jump to upon completion
@@ -376,7 +379,7 @@ ENDPROC(__enable_mmu)
  *
  *  r0  = cp#15 control register
  *  r1  = machine ID
- *  r2  = atags pointer
+ *  r2  = atags or dtb pointer
  *  r9  = processor ID
  *  r13 = *virtual* address to jump to upon completion
  *
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 6dce209..ed11fb0 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -20,6 +20,7 @@
 #include <linux/screen_info.h>
 #include <linux/init.h>
 #include <linux/kexec.h>
+#include <linux/of_fdt.h>
 #include <linux/crash_dump.h>
 #include <linux/root_dev.h>
 #include <linux/cpu.h>
@@ -42,6 +43,7 @@
 #include <asm/cachetype.h>
 #include <asm/tlbflush.h>
 
+#include <asm/prom.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
@@ -309,7 +311,7 @@ static void __init cacheid_init(void)
  */
 extern struct proc_info_list *lookup_processor_type(unsigned int);
 
-static void __init early_print(const char *str, ...)
+void __init early_print(const char *str, ...)
 {
 	extern void printascii(const char *);
 	char buf[256];
@@ -439,25 +441,12 @@ void cpu_init(void)
 	    : "r14");
 }
 
-static struct machine_desc * __init setup_machine(unsigned int nr)
+void __init dump_machine_table(void)
 {
-	extern struct machine_desc __arch_info_begin[], __arch_info_end[];
 	struct machine_desc *p;
 
-	/*
-	 * locate machine in the list of supported machines.
-	 */
-	for (p = __arch_info_begin; p < __arch_info_end; p++)
-		if (nr == p->nr) {
-			printk("Machine: %s\n", p->name);
-			return p;
-		}
-
-	early_print("\n"
-		"Error: unrecognized/unsupported machine ID (r1 = 0x%08x).\n\n"
-		"Available machine support:\n\nID (hex)\tNAME\n", nr);
-
-	for (p = __arch_info_begin; p < __arch_info_end; p++)
+	early_print("Available machine support:\n\nID (hex)\tNAME\n");
+	for_each_machine_desc(p)
 		early_print("%08x\t%s\n", p->nr, p->name);
 
 	early_print("\nPlease check your kernel config and/or bootloader.\n");
@@ -466,7 +455,7 @@ static struct machine_desc * __init setup_machine(unsigned int nr)
 		/* can't use cpu_relax() here as it may require MMU setup */;
 }
 
-static int __init arm_add_memory(phys_addr_t start, unsigned long size)
+int __init arm_add_memory(phys_addr_t start, unsigned long size)
 {
 	struct membank *bank = &meminfo.bank[meminfo.nr_banks];
 
@@ -801,23 +790,29 @@ static void __init squash_mem_tags(struct tag *tag)
 			tag->hdr.tag = ATAG_NONE;
 }
 
-void __init setup_arch(char **cmdline_p)
+static struct machine_desc * __init setup_machine_tags(unsigned int nr)
 {
 	struct tag *tags = (struct tag *)&init_tags;
-	struct machine_desc *mdesc;
+	struct machine_desc *mdesc = NULL, *p;
 	char *from = default_command_line;
 
 	init_tags.mem.start = PHYS_OFFSET;
 
-	unwind_init();
-
-	setup_processor();
-	mdesc = setup_machine(machine_arch_type);
-	machine_desc = mdesc;
-	machine_name = mdesc->name;
+	/*
+	 * locate machine in the list of supported machines.
+	 */
+	for_each_machine_desc(p)
+		if (nr == p->nr) {
+			printk("Machine: %s\n", p->name);
+			mdesc = p;
+			break;
+		}
 
-	if (mdesc->soft_reboot)
-		reboot_setup("s");
+	if (!mdesc) {
+		early_print("\nError: unrecognized/unsupported machine ID"
+			" (r1 = 0x%08x).\n\n", nr);
+		dump_machine_table(); /* does not return */
+	}
 
 	if (__atags_pointer)
 		tags = phys_to_virt(__atags_pointer);
@@ -849,8 +844,17 @@ void __init setup_arch(char **cmdline_p)
 	if (tags->hdr.tag != ATAG_CORE)
 		convert_to_tag_list(tags);
 #endif
-	if (tags->hdr.tag != ATAG_CORE)
+
+	if (tags->hdr.tag != ATAG_CORE) {
+#if defined(CONFIG_OF)
+		/*
+		 * If CONFIG_OF is set, then assume this is a reasonably
+		 * modern system that should pass boot parameters
+		 */
+		early_print("Warning: Neither atags nor dtb found\n");
+#endif
 		tags = (struct tag *)&init_tags;
+	}
 
 	if (mdesc->fixup)
 		mdesc->fixup(mdesc, tags, &from, &meminfo);
@@ -862,14 +866,34 @@ void __init setup_arch(char **cmdline_p)
 		parse_tags(tags);
 	}
 
+	/* parse_early_param needs a boot_command_line */
+	strlcpy(boot_command_line, from, COMMAND_LINE_SIZE);
+
+	return mdesc;
+}
+
+
+void __init setup_arch(char **cmdline_p)
+{
+	struct machine_desc *mdesc;
+
+	unwind_init();
+
+	setup_processor();
+	mdesc = setup_machine_fdt(__atags_pointer);
+	if (!mdesc)
+		mdesc = setup_machine_tags(machine_arch_type);
+	machine_desc = mdesc;
+	machine_name = mdesc->name;
+
+	if (mdesc->soft_reboot)
+		reboot_setup("s");
+
 	init_mm.start_code = (unsigned long) _text;
 	init_mm.end_code   = (unsigned long) _etext;
 	init_mm.end_data   = (unsigned long) _edata;
 	init_mm.brk	   = (unsigned long) _end;
 
-	/* parse_early_param needs a boot_command_line */
-	strlcpy(boot_command_line, from, COMMAND_LINE_SIZE);
-
 	/* populate cmd_line too for later use, preserving boot_command_line */
 	strlcpy(cmd_line, boot_command_line, COMMAND_LINE_SIZE);
 	*cmdline_p = cmd_line;
@@ -881,6 +905,8 @@ void __init setup_arch(char **cmdline_p)
 	paging_init(mdesc);
 	request_standard_resources(mdesc);
 
+	unflatten_device_tree();
+
 #ifdef CONFIG_SMP
 	if (is_smp())
 		smp_init_cpus();
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index d439a8f..344e52b 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -105,6 +105,7 @@ int __cpuinit __cpu_up(unsigned int cpu)
 	 */
 	secondary_data.stack = task_stack_page(idle) + THREAD_START_SP;
 	secondary_data.pgdir = virt_to_phys(pgd);
+	secondary_data.swapper_pg_dir = virt_to_phys(swapper_pg_dir);
 	__cpuc_flush_dcache_area(&secondary_data, sizeof(secondary_data));
 	outer_clean_range(__pa(&secondary_data), __pa(&secondary_data + 1));
 
diff --git a/arch/arm/lib/lib1funcs.S b/arch/arm/lib/lib1funcs.S
index 6dc0648..c562f64 100644
--- a/arch/arm/lib/lib1funcs.S
+++ b/arch/arm/lib/lib1funcs.S
@@ -35,7 +35,7 @@ Boston, MA 02111-1307, USA.  */
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-
+#include <asm/unwind.h>
 
 .macro ARM_DIV_BODY dividend, divisor, result, curbit
 
@@ -207,6 +207,7 @@ Boston, MA 02111-1307, USA.  */
 
 ENTRY(__udivsi3)
 ENTRY(__aeabi_uidiv)
+UNWIND(.fnstart)
 
 	subs	r2, r1, #1
 	moveq	pc, lr
@@ -230,10 +231,12 @@ ENTRY(__aeabi_uidiv)
 	mov	r0, r0, lsr r2
 	mov	pc, lr
 
+UNWIND(.fnend)
 ENDPROC(__udivsi3)
 ENDPROC(__aeabi_uidiv)
 
 ENTRY(__umodsi3)
+UNWIND(.fnstart)
 
 	subs	r2, r1, #1			@ compare divisor with 1
 	bcc	Ldiv0
@@ -247,10 +250,12 @@ ENTRY(__umodsi3)
 
 	mov	pc, lr
 
+UNWIND(.fnend)
 ENDPROC(__umodsi3)
 
 ENTRY(__divsi3)
 ENTRY(__aeabi_idiv)
+UNWIND(.fnstart)
 
 	cmp	r1, #0
 	eor	ip, r0, r1			@ save the sign of the result.
@@ -287,10 +292,12 @@ ENTRY(__aeabi_idiv)
 	rsbmi	r0, r0, #0
 	mov	pc, lr
 
+UNWIND(.fnend)
 ENDPROC(__divsi3)
 ENDPROC(__aeabi_idiv)
 
 ENTRY(__modsi3)
+UNWIND(.fnstart)
 
 	cmp	r1, #0
 	beq	Ldiv0
@@ -310,11 +317,14 @@ ENTRY(__modsi3)
 	rsbmi	r0, r0, #0
 	mov	pc, lr
 
+UNWIND(.fnend)
 ENDPROC(__modsi3)
 
 #ifdef CONFIG_AEABI
 
 ENTRY(__aeabi_uidivmod)
+UNWIND(.fnstart)
+UNWIND(.save {r0, r1, ip, lr}	)
 
 	stmfd	sp!, {r0, r1, ip, lr}
 	bl	__aeabi_uidiv
@@ -323,10 +333,12 @@ ENTRY(__aeabi_uidivmod)
 	sub	r1, r1, r3
 	mov	pc, lr
 
+UNWIND(.fnend)
 ENDPROC(__aeabi_uidivmod)
 
 ENTRY(__aeabi_idivmod)
-
+UNWIND(.fnstart)
+UNWIND(.save {r0, r1, ip, lr}	)
 	stmfd	sp!, {r0, r1, ip, lr}
 	bl	__aeabi_idiv
 	ldmfd	sp!, {r1, r2, ip, lr}
@@ -334,15 +346,18 @@ ENTRY(__aeabi_idivmod)
 	sub	r1, r1, r3
 	mov	pc, lr
 
+UNWIND(.fnend)
 ENDPROC(__aeabi_idivmod)
 
 #endif
 
 Ldiv0:
-
+UNWIND(.fnstart)
+UNWIND(.pad #4)
+UNWIND(.save {lr})
 	str	lr, [sp, #-8]!
 	bl	__div0
 	mov	r0, #0			@ About as wrong as it could be.
 	ldr	pc, [sp], #8
-
-
+UNWIND(.fnend)
+ENDPROC(Ldiv0)
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 2d299bf..2248467 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -3,9 +3,6 @@ if ARCH_AT91
 config HAVE_AT91_DATAFLASH_CARD
 	bool
 
-config HAVE_NAND_ATMEL_BUSWIDTH_16
-	bool
-
 config HAVE_AT91_USART3
 	bool
 
@@ -85,11 +82,6 @@ config ARCH_AT91CAP9
 	select HAVE_FB_ATMEL
 	select HAVE_NET_MACB
 
-config ARCH_AT572D940HF
-	bool "AT572D940HF"
-	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
-
 config ARCH_AT91X40
 	bool "AT91x40"
 	select ARCH_USES_GETTIMEOFFSET
@@ -209,7 +201,6 @@ comment "AT91SAM9260 / AT91SAM9XE Board Type"
 config MACH_AT91SAM9260EK
 	bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
 	select HAVE_AT91_DATAFLASH_CARD
-	select HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
 	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
@@ -270,7 +261,6 @@ comment "AT91SAM9261 Board Type"
 config MACH_AT91SAM9261EK
 	bool "Atmel AT91SAM9261-EK Evaluation Kit"
 	select HAVE_AT91_DATAFLASH_CARD
-	select HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
 	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
@@ -286,7 +276,6 @@ comment "AT91SAM9G10 Board Type"
 config MACH_AT91SAM9G10EK
 	bool "Atmel AT91SAM9G10-EK Evaluation Kit"
 	select HAVE_AT91_DATAFLASH_CARD
-	select HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
 	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
@@ -302,7 +291,6 @@ comment "AT91SAM9263 Board Type"
 config MACH_AT91SAM9263EK
 	bool "Atmel AT91SAM9263-EK Evaluation Kit"
 	select HAVE_AT91_DATAFLASH_CARD
-	select HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
 	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
@@ -343,7 +331,6 @@ comment "AT91SAM9G20 Board Type"
 config MACH_AT91SAM9G20EK
 	bool "Atmel AT91SAM9G20-EK Evaluation Kit"
 	select HAVE_AT91_DATAFLASH_CARD
-	select HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
 	  that embeds only one SD/MMC slot.
@@ -351,7 +338,6 @@ config MACH_AT91SAM9G20EK
 config MACH_AT91SAM9G20EK_2MMC
 	depends on MACH_AT91SAM9G20EK
 	bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots"
-	select HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
 	  with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
@@ -416,7 +402,6 @@ comment "AT91SAM9G45 Board Type"
 
 config MACH_AT91SAM9M10G45EK
 	bool "Atmel AT91SAM9M10G45-EK Evaluation Kits"
-	select HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit.
 	  "ES" at the end of the name means that this board is an
@@ -433,7 +418,6 @@ comment "AT91CAP9 Board Type"
 config MACH_AT91CAP9ADK
 	bool "Atmel AT91CAP9A-DK Evaluation Kit"
 	select HAVE_AT91_DATAFLASH_CARD
-	select HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  Select this if you are using Atmel's AT91CAP9A-DK Evaluation Kit.
 	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4138>
@@ -442,23 +426,6 @@ endif
 
 # ----------------------------------------------------------
 
-if ARCH_AT572D940HF
-
-comment "AT572D940HF Board Type"
-
-config MACH_AT572D940HFEB
-	bool "AT572D940HF-EK"
-	depends on ARCH_AT572D940HF
-	select HAVE_AT91_DATAFLASH_CARD
-	select HAVE_NAND_ATMEL_BUSWIDTH_16
-	help
-	  Select this if you are using Atmel's AT572D940HF-EK evaluation kit.
-	  <http://www.atmel.com/products/diopsis/default.asp>
-
-endif
-
-# ----------------------------------------------------------
-
 if ARCH_AT91X40
 
 comment "AT91X40 Board Type"
@@ -483,13 +450,6 @@ config MTD_AT91_DATAFLASH_CARD
 	help
 	  Enable support for the DataFlash card.
 
-config MTD_NAND_ATMEL_BUSWIDTH_16
-	bool "Enable 16-bit data bus interface to NAND flash"
-	depends on HAVE_NAND_ATMEL_BUSWIDTH_16
-	help
-	  On AT91SAM926x boards both types of NAND flash can be present
-	  (8 and 16 bit data bus width).
-
 # ----------------------------------------------------------
 
 comment "AT91 Feature Selections"
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index a83835e..9696623 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -19,7 +19,6 @@ obj-$(CONFIG_ARCH_AT91SAM9RL)	+= at91sam9rl.o at91sam926x_time.o at91sam9rl_devi
 obj-$(CONFIG_ARCH_AT91SAM9G20)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o at91sam9_alt_reset.o
 obj-$(CONFIG_ARCH_AT91SAM9G45)	+= at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91CAP9)	+= at91cap9.o at91sam926x_time.o at91cap9_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT572D940HF)  += at572d940hf.o at91sam926x_time.o at572d940hf_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91X40)	+= at91x40.o at91x40_time.o
 
 # AT91RM9200 board-specific support
@@ -78,9 +77,6 @@ obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o
 # AT91CAP9 board-specific support
 obj-$(CONFIG_MACH_AT91CAP9ADK)	+= board-cap9adk.o
 
-# AT572D940HF board-specific support
-obj-$(CONFIG_MACH_AT572D940HFEB) += board-at572d940hf_ek.o
-
 # AT91X40 board-specific support
 obj-$(CONFIG_MACH_AT91EB01)	+= board-eb01.o
 
diff --git a/arch/arm/mach-at91/at572d940hf.c b/arch/arm/mach-at91/at572d940hf.c
deleted file mode 100644
index a6b9c68..0000000
--- a/arch/arm/mach-at91/at572d940hf.c
+++ /dev/null
@@ -1,377 +0,0 @@
-/*
- * arch/arm/mach-at91/at572d940hf.c
- *
- * Antonio R. Costa <costa.antonior@gmail.com>
- * Copyright (C) 2008 Atmel
- *
- * Copyright (C) 2005 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#include <linux/module.h>
-
-#include <asm/mach/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <mach/at572d940hf.h>
-#include <mach/at91_pmc.h>
-#include <mach/at91_rstc.h>
-
-#include "generic.h"
-#include "clock.h"
-
-static struct map_desc at572d940hf_io_desc[] __initdata = {
-	{
-		.virtual	= AT91_VA_BASE_SYS,
-		.pfn		= __phys_to_pfn(AT91_BASE_SYS),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= AT91_IO_VIRT_BASE - AT572D940HF_SRAM_SIZE,
-		.pfn		= __phys_to_pfn(AT572D940HF_SRAM_BASE),
-		.length		= AT572D940HF_SRAM_SIZE,
-		.type		= MT_DEVICE,
-	},
-};
-
-/* --------------------------------------------------------------------
- *  Clocks
- * -------------------------------------------------------------------- */
-
-/*
- * The peripheral clocks.
- */
-static struct clk pioA_clk = {
-	.name		= "pioA_clk",
-	.pmc_mask	= 1 << AT572D940HF_ID_PIOA,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioB_clk = {
-	.name		= "pioB_clk",
-	.pmc_mask	= 1 << AT572D940HF_ID_PIOB,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioC_clk = {
-	.name		= "pioC_clk",
-	.pmc_mask	= 1 << AT572D940HF_ID_PIOC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk macb_clk = {
-	.name		= "macb_clk",
-	.pmc_mask	= 1 << AT572D940HF_ID_EMAC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart0_clk = {
-	.name		= "usart0_clk",
-	.pmc_mask	= 1 << AT572D940HF_ID_US0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart1_clk = {
-	.name		= "usart1_clk",
-	.pmc_mask	= 1 << AT572D940HF_ID_US1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart2_clk = {
-	.name		= "usart2_clk",
-	.pmc_mask	= 1 << AT572D940HF_ID_US2,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc_clk = {
-	.name		= "mci_clk",
-	.pmc_mask	= 1 << AT572D940HF_ID_MCI,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk udc_clk = {
-	.name		= "udc_clk",
-	.pmc_mask	= 1 << AT572D940HF_ID_UDP,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk twi0_clk = {
-	.name		= "twi0_clk",
-	.pmc_mask	= 1 << AT572D940HF_ID_TWI0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi0_clk = {
-	.name		= "spi0_clk",
-	.pmc_mask	= 1 << AT572D940HF_ID_SPI0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi1_clk = {
-	.name		= "spi1_clk",
-	.pmc_mask	= 1 << AT572D940HF_ID_SPI1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc0_clk = {
-	.name		= "ssc0_clk",
-	.pmc_mask	= 1 << AT572D940HF_ID_SSC0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc1_clk = {
-	.name		= "ssc1_clk",
-	.pmc_mask	= 1 << AT572D940HF_ID_SSC1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc2_clk = {
-	.name		= "ssc2_clk",
-	.pmc_mask	= 1 << AT572D940HF_ID_SSC2,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc0_clk = {
-	.name		= "tc0_clk",
-	.pmc_mask	= 1 << AT572D940HF_ID_TC0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc1_clk = {
-	.name		= "tc1_clk",
-	.pmc_mask	= 1 << AT572D940HF_ID_TC1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc2_clk = {
-	.name		= "tc2_clk",
-	.pmc_mask	= 1 << AT572D940HF_ID_TC2,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk ohci_clk = {
-	.name		= "ohci_clk",
-	.pmc_mask	= 1 << AT572D940HF_ID_UHP,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc3_clk = {
-	.name		= "ssc3_clk",
-	.pmc_mask	= 1 << AT572D940HF_ID_SSC3,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk twi1_clk = {
-	.name		= "twi1_clk",
-	.pmc_mask	= 1 << AT572D940HF_ID_TWI1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk can0_clk = {
-	.name		= "can0_clk",
-	.pmc_mask	= 1 << AT572D940HF_ID_CAN0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk can1_clk = {
-	.name		= "can1_clk",
-	.pmc_mask	= 1 << AT572D940HF_ID_CAN1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk mAgicV_clk = {
-	.name		= "mAgicV_clk",
-	.pmc_mask	= 1 << AT572D940HF_ID_MSIRQ0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-
-
-static struct clk *periph_clocks[] __initdata = {
-	&pioA_clk,
-	&pioB_clk,
-	&pioC_clk,
-	&macb_clk,
-	&usart0_clk,
-	&usart1_clk,
-	&usart2_clk,
-	&mmc_clk,
-	&udc_clk,
-	&twi0_clk,
-	&spi0_clk,
-	&spi1_clk,
-	&ssc0_clk,
-	&ssc1_clk,
-	&ssc2_clk,
-	&tc0_clk,
-	&tc1_clk,
-	&tc2_clk,
-	&ohci_clk,
-	&ssc3_clk,
-	&twi1_clk,
-	&can0_clk,
-	&can1_clk,
-	&mAgicV_clk,
-	/* irq0 .. irq2 */
-};
-
-/*
- * The five programmable clocks.
- * You must configure pin multiplexing to bring these signals out.
- */
-static struct clk pck0 = {
-	.name		= "pck0",
-	.pmc_mask	= AT91_PMC_PCK0,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 0,
-};
-static struct clk pck1 = {
-	.name		= "pck1",
-	.pmc_mask	= AT91_PMC_PCK1,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 1,
-};
-static struct clk pck2 = {
-	.name		= "pck2",
-	.pmc_mask	= AT91_PMC_PCK2,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 2,
-};
-static struct clk pck3 = {
-	.name		= "pck3",
-	.pmc_mask	= AT91_PMC_PCK3,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 3,
-};
-
-static struct clk mAgicV_mem_clk = {
-	.name		= "mAgicV_mem_clk",
-	.pmc_mask	= AT91_PMC_PCK4,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 4,
-};
-
-/* HClocks */
-static struct clk hck0 = {
-	.name		= "hck0",
-	.pmc_mask	= AT91_PMC_HCK0,
-	.type		= CLK_TYPE_SYSTEM,
-	.id		= 0,
-};
-static struct clk hck1 = {
-	.name		= "hck1",
-	.pmc_mask	= AT91_PMC_HCK1,
-	.type		= CLK_TYPE_SYSTEM,
-	.id		= 1,
-};
-
-static void __init at572d940hf_register_clocks(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
-		clk_register(periph_clocks[i]);
-
-	clk_register(&pck0);
-	clk_register(&pck1);
-	clk_register(&pck2);
-	clk_register(&pck3);
-	clk_register(&mAgicV_mem_clk);
-
-	clk_register(&hck0);
-	clk_register(&hck1);
-}
-
-/* --------------------------------------------------------------------
- *  GPIO
- * -------------------------------------------------------------------- */
-
-static struct at91_gpio_bank at572d940hf_gpio[] = {
-	{
-		.id		= AT572D940HF_ID_PIOA,
-		.offset		= AT91_PIOA,
-		.clock		= &pioA_clk,
-	}, {
-		.id		= AT572D940HF_ID_PIOB,
-		.offset		= AT91_PIOB,
-		.clock		= &pioB_clk,
-	}, {
-		.id		= AT572D940HF_ID_PIOC,
-		.offset		= AT91_PIOC,
-		.clock		= &pioC_clk,
-	}
-};
-
-static void at572d940hf_reset(void)
-{
-	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
-}
-
-
-/* --------------------------------------------------------------------
- *  AT572D940HF processor initialization
- * -------------------------------------------------------------------- */
-
-void __init at572d940hf_initialize(unsigned long main_clock)
-{
-	/* Map peripherals */
-	iotable_init(at572d940hf_io_desc, ARRAY_SIZE(at572d940hf_io_desc));
-
-	at91_arch_reset = at572d940hf_reset;
-	at91_extern_irq = (1 << AT572D940HF_ID_IRQ0) | (1 << AT572D940HF_ID_IRQ1)
-			| (1 << AT572D940HF_ID_IRQ2);
-
-	/* Init clock subsystem */
-	at91_clock_init(main_clock);
-
-	/* Register the processor-specific clocks */
-	at572d940hf_register_clocks();
-
-	/* Register GPIO subsystem */
-	at91_gpio_init(at572d940hf_gpio, 3);
-}
-
-/* --------------------------------------------------------------------
- *  Interrupt initialization
- * -------------------------------------------------------------------- */
-
-/*
- * The default interrupt priority levels (0 = lowest, 7 = highest).
- */
-static unsigned int at572d940hf_default_irq_priority[NR_AIC_IRQS] __initdata = {
-	7,	/* Advanced Interrupt Controller */
-	7,	/* System Peripherals */
-	0,	/* Parallel IO Controller A */
-	0,	/* Parallel IO Controller B */
-	0,	/* Parallel IO Controller C */
-	3,	/* Ethernet */
-	6,	/* USART 0 */
-	6,	/* USART 1 */
-	6,	/* USART 2 */
-	0,	/* Multimedia Card Interface */
-	4,	/* USB Device Port */
-	0,	/* Two-Wire Interface 0 */
-	6,	/* Serial Peripheral Interface 0 */
-	6,	/* Serial Peripheral Interface 1 */
-	5,	/* Serial Synchronous Controller 0 */
-	5,	/* Serial Synchronous Controller 1 */
-	5,	/* Serial Synchronous Controller 2 */
-	0,	/* Timer Counter 0 */
-	0,	/* Timer Counter 1 */
-	0,	/* Timer Counter 2 */
-	3,	/* USB Host port */
-	3,	/* Serial Synchronous Controller 3 */
-	0,	/* Two-Wire Interface 1 */
-	0,	/* CAN Controller 0 */
-	0,	/* CAN Controller 1 */
-	0,	/* mAgicV HALT line */
-	0,	/* mAgicV SIRQ0 line */
-	0,	/* mAgicV exception line */
-	0,	/* mAgicV end of DMA line */
-	0,	/* Advanced Interrupt Controller */
-	0,	/* Advanced Interrupt Controller */
-	0,	/* Advanced Interrupt Controller */
-};
-
-void __init at572d940hf_init_interrupts(unsigned int priority[NR_AIC_IRQS])
-{
-	if (!priority)
-		priority = at572d940hf_default_irq_priority;
-
-	/* Initialize the AIC interrupt controller */
-	at91_aic_init(priority);
-
-	/* Enable GPIO interrupts */
-	at91_gpio_irq_setup();
-}
-
diff --git a/arch/arm/mach-at91/at572d940hf_devices.c b/arch/arm/mach-at91/at572d940hf_devices.c
deleted file mode 100644
index 0fc20a2..0000000
--- a/arch/arm/mach-at91/at572d940hf_devices.c
+++ /dev/null
@@ -1,970 +0,0 @@
-/*
- * arch/arm/mach-at91/at572d940hf_devices.c
- *
- * Copyright (C) 2008 Atmel Antonio R. Costa <costa.antonior@gmail.com>
- * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
- * Copyright (C) 2005 David Brownell
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-
-#include <mach/board.h>
-#include <mach/gpio.h>
-#include <mach/at572d940hf.h>
-#include <mach/at572d940hf_matrix.h>
-#include <mach/at91sam9_smc.h>
-
-#include "generic.h"
-#include "sam9_smc.h"
-
-
-/* --------------------------------------------------------------------
- *  USB Host
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static u64 ohci_dmamask = DMA_BIT_MASK(32);
-static struct at91_usbh_data usbh_data;
-
-static struct resource usbh_resources[] = {
-	[0] = {
-		.start	= AT572D940HF_UHP_BASE,
-		.end	= AT572D940HF_UHP_BASE + SZ_1M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT572D940HF_ID_UHP,
-		.end	= AT572D940HF_ID_UHP,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at572d940hf_usbh_device = {
-	.name		= "at91_ohci",
-	.id		= -1,
-	.dev		= {
-				.dma_mask		= &ohci_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &usbh_data,
-	},
-	.resource	= usbh_resources,
-	.num_resources	= ARRAY_SIZE(usbh_resources),
-};
-
-void __init at91_add_device_usbh(struct at91_usbh_data *data)
-{
-	if (!data)
-		return;
-
-	usbh_data = *data;
-	platform_device_register(&at572d940hf_usbh_device);
-
-}
-#else
-void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  USB Device (Gadget)
- * -------------------------------------------------------------------- */
-
-#ifdef CONFIG_USB_GADGET_AT91
-static struct at91_udc_data udc_data;
-
-static struct resource udc_resources[] = {
-	[0] = {
-		.start	= AT572D940HF_BASE_UDP,
-		.end	= AT572D940HF_BASE_UDP + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT572D940HF_ID_UDP,
-		.end	= AT572D940HF_ID_UDP,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at572d940hf_udc_device = {
-	.name		= "at91_udc",
-	.id		= -1,
-	.dev		= {
-				.platform_data		= &udc_data,
-	},
-	.resource	= udc_resources,
-	.num_resources	= ARRAY_SIZE(udc_resources),
-};
-
-void __init at91_add_device_udc(struct at91_udc_data *data)
-{
-	if (!data)
-		return;
-
-	if (data->vbus_pin) {
-		at91_set_gpio_input(data->vbus_pin, 0);
-		at91_set_deglitch(data->vbus_pin, 1);
-	}
-
-	/* Pullup pin is handled internally */
-
-	udc_data = *data;
-	platform_device_register(&at572d940hf_udc_device);
-}
-#else
-void __init at91_add_device_udc(struct at91_udc_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  Ethernet
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
-static u64 eth_dmamask = DMA_BIT_MASK(32);
-static struct at91_eth_data eth_data;
-
-static struct resource eth_resources[] = {
-	[0] = {
-		.start	= AT572D940HF_BASE_EMAC,
-		.end	= AT572D940HF_BASE_EMAC + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT572D940HF_ID_EMAC,
-		.end	= AT572D940HF_ID_EMAC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at572d940hf_eth_device = {
-	.name		= "macb",
-	.id		= -1,
-	.dev		= {
-			.dma_mask		= &eth_dmamask,
-			.coherent_dma_mask	= DMA_BIT_MASK(32),
-			.platform_data		= &eth_data,
-	},
-	.resource	= eth_resources,
-	.num_resources	= ARRAY_SIZE(eth_resources),
-};
-
-void __init at91_add_device_eth(struct at91_eth_data *data)
-{
-	if (!data)
-		return;
-
-	if (data->phy_irq_pin) {
-		at91_set_gpio_input(data->phy_irq_pin, 0);
-		at91_set_deglitch(data->phy_irq_pin, 1);
-	}
-
-	/* Only RMII is supported */
-	data->is_rmii = 1;
-
-	/* Pins used for RMII */
-	at91_set_A_periph(AT91_PIN_PA16, 0);	/* ETXCK_EREFCK */
-	at91_set_A_periph(AT91_PIN_PA17, 0);	/* ERXDV */
-	at91_set_A_periph(AT91_PIN_PA18, 0);	/* ERX0 */
-	at91_set_A_periph(AT91_PIN_PA19, 0);	/* ERX1 */
-	at91_set_A_periph(AT91_PIN_PA20, 0);	/* ERXER */
-	at91_set_A_periph(AT91_PIN_PA23, 0);	/* ETXEN */
-	at91_set_A_periph(AT91_PIN_PA21, 0);	/* ETX0 */
-	at91_set_A_periph(AT91_PIN_PA22, 0);	/* ETX1 */
-	at91_set_A_periph(AT91_PIN_PA13, 0);	/* EMDIO */
-	at91_set_A_periph(AT91_PIN_PA14, 0);	/* EMDC */
-
-	eth_data = *data;
-	platform_device_register(&at572d940hf_eth_device);
-}
-#else
-void __init at91_add_device_eth(struct at91_eth_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  MMC / SD
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
-static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct at91_mmc_data mmc_data;
-
-static struct resource mmc_resources[] = {
-	[0] = {
-		.start	= AT572D940HF_BASE_MCI,
-		.end	= AT572D940HF_BASE_MCI + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT572D940HF_ID_MCI,
-		.end	= AT572D940HF_ID_MCI,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at572d940hf_mmc_device = {
-	.name		= "at91_mci",
-	.id		= -1,
-	.dev		= {
-				.dma_mask		= &mmc_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &mmc_data,
-	},
-	.resource	= mmc_resources,
-	.num_resources	= ARRAY_SIZE(mmc_resources),
-};
-
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
-{
-	if (!data)
-		return;
-
-	/* input/irq */
-	if (data->det_pin) {
-		at91_set_gpio_input(data->det_pin, 1);
-		at91_set_deglitch(data->det_pin, 1);
-	}
-	if (data->wp_pin)
-		at91_set_gpio_input(data->wp_pin, 1);
-	if (data->vcc_pin)
-		at91_set_gpio_output(data->vcc_pin, 0);
-
-	/* CLK */
-	at91_set_A_periph(AT91_PIN_PC22, 0);
-
-	/* CMD */
-	at91_set_A_periph(AT91_PIN_PC23, 1);
-
-	/* DAT0, maybe DAT1..DAT3 */
-	at91_set_A_periph(AT91_PIN_PC24, 1);
-	if (data->wire4) {
-		at91_set_A_periph(AT91_PIN_PC25, 1);
-		at91_set_A_periph(AT91_PIN_PC26, 1);
-		at91_set_A_periph(AT91_PIN_PC27, 1);
-	}
-
-	mmc_data = *data;
-	platform_device_register(&at572d940hf_mmc_device);
-}
-#else
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  NAND / SmartMedia
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
-static struct atmel_nand_data nand_data;
-
-#define NAND_BASE	AT91_CHIPSELECT_3
-
-static struct resource nand_resources[] = {
-	{
-		.start	= NAND_BASE,
-		.end	= NAND_BASE + SZ_256M - 1,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device at572d940hf_nand_device = {
-	.name		= "atmel_nand",
-	.id		= -1,
-	.dev		= {
-				.platform_data	= &nand_data,
-	},
-	.resource	= nand_resources,
-	.num_resources	= ARRAY_SIZE(nand_resources),
-};
-
-void __init at91_add_device_nand(struct atmel_nand_data *data)
-{
-	unsigned long csa;
-
-	if (!data)
-		return;
-
-	csa = at91_sys_read(AT91_MATRIX_EBICSA);
-	at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
-
-	/* enable pin */
-	if (data->enable_pin)
-		at91_set_gpio_output(data->enable_pin, 1);
-
-	/* ready/busy pin */
-	if (data->rdy_pin)
-		at91_set_gpio_input(data->rdy_pin, 1);
-
-	/* card detect pin */
-	if (data->det_pin)
-		at91_set_gpio_input(data->det_pin, 1);
-
-	at91_set_A_periph(AT91_PIN_PB28, 0);		/* A[22] */
-	at91_set_B_periph(AT91_PIN_PA28, 0);		/* NANDOE */
-	at91_set_B_periph(AT91_PIN_PA29, 0);		/* NANDWE */
-
-	nand_data = *data;
-	platform_device_register(&at572d940hf_nand_device);
-}
-
-#else
-void __init at91_add_device_nand(struct atmel_nand_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  TWI (i2c)
- * -------------------------------------------------------------------- */
-
-/*
- * Prefer the GPIO code since the TWI controller isn't robust
- * (gets overruns and underruns under load) and can only issue
- * repeated STARTs in one scenario (the driver doesn't yet handle them).
- */
-
-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
-
-static struct i2c_gpio_platform_data pdata = {
-	.sda_pin		= AT91_PIN_PC7,
-	.sda_is_open_drain	= 1,
-	.scl_pin		= AT91_PIN_PC8,
-	.scl_is_open_drain	= 1,
-	.udelay			= 2,		/* ~100 kHz */
-};
-
-static struct platform_device at572d940hf_twi_device {
-	.name			= "i2c-gpio",
-	.id			= -1,
-	.dev.platform_data	= &pdata,
-};
-
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
-	at91_set_GPIO_periph(AT91_PIN_PC7, 1);		/* TWD (SDA) */
-	at91_set_multi_drive(AT91_PIN_PC7, 1);
-
-	at91_set_GPIO_periph(AT91_PIN_PA8, 1);		/* TWCK (SCL) */
-	at91_set_multi_drive(AT91_PIN_PC8, 1);
-
-	i2c_register_board_info(0, devices, nr_devices);
-	platform_device_register(&at572d940hf_twi_device);
-}
-
-#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
-
-static struct resource twi0_resources[] = {
-	[0] = {
-		.start	= AT572D940HF_BASE_TWI0,
-		.end	= AT572D940HF_BASE_TWI0 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT572D940HF_ID_TWI0,
-		.end	= AT572D940HF_ID_TWI0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at572d940hf_twi0_device = {
-	.name		= "at91_i2c",
-	.id		= 0,
-	.resource	= twi0_resources,
-	.num_resources	= ARRAY_SIZE(twi0_resources),
-};
-
-static struct resource twi1_resources[] = {
-	[0] = {
-		.start	= AT572D940HF_BASE_TWI1,
-		.end	= AT572D940HF_BASE_TWI1 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT572D940HF_ID_TWI1,
-		.end	= AT572D940HF_ID_TWI1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at572d940hf_twi1_device = {
-	.name		= "at91_i2c",
-	.id		= 1,
-	.resource	= twi1_resources,
-	.num_resources	= ARRAY_SIZE(twi1_resources),
-};
-
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
-	/* pins used for TWI0 interface */
-	at91_set_A_periph(AT91_PIN_PC7, 0);		/* TWD */
-	at91_set_multi_drive(AT91_PIN_PC7, 1);
-
-	at91_set_A_periph(AT91_PIN_PC8, 0);		/* TWCK */
-	at91_set_multi_drive(AT91_PIN_PC8, 1);
-
-	/* pins used for TWI1 interface */
-	at91_set_A_periph(AT91_PIN_PC20, 0);		/* TWD */
-	at91_set_multi_drive(AT91_PIN_PC20, 1);
-
-	at91_set_A_periph(AT91_PIN_PC21, 0);		/* TWCK */
-	at91_set_multi_drive(AT91_PIN_PC21, 1);
-
-	i2c_register_board_info(0, devices, nr_devices);
-	platform_device_register(&at572d940hf_twi0_device);
-	platform_device_register(&at572d940hf_twi1_device);
-}
-#else
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  SPI
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-static u64 spi_dmamask = DMA_BIT_MASK(32);
-
-static struct resource spi0_resources[] = {
-	[0] = {
-		.start	= AT572D940HF_BASE_SPI0,
-		.end	= AT572D940HF_BASE_SPI0 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT572D940HF_ID_SPI0,
-		.end	= AT572D940HF_ID_SPI0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at572d940hf_spi0_device = {
-	.name		= "atmel_spi",
-	.id		= 0,
-	.dev		= {
-				.dma_mask		= &spi_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= spi0_resources,
-	.num_resources	= ARRAY_SIZE(spi0_resources),
-};
-
-static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA5, AT91_PIN_PA6 };
-
-static struct resource spi1_resources[] = {
-	[0] = {
-		.start	= AT572D940HF_BASE_SPI1,
-		.end	= AT572D940HF_BASE_SPI1 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT572D940HF_ID_SPI1,
-		.end	= AT572D940HF_ID_SPI1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at572d940hf_spi1_device = {
-	.name		= "atmel_spi",
-	.id		= 1,
-	.dev		= {
-				.dma_mask		= &spi_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= spi1_resources,
-	.num_resources	= ARRAY_SIZE(spi1_resources),
-};
-
-static const unsigned spi1_standard_cs[4] = { AT91_PIN_PC3, AT91_PIN_PC4, AT91_PIN_PC5, AT91_PIN_PC6 };
-
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
-{
-	int i;
-	unsigned long cs_pin;
-	short enable_spi0 = 0;
-	short enable_spi1 = 0;
-
-	/* Choose SPI chip-selects */
-	for (i = 0; i < nr_devices; i++) {
-		if (devices[i].controller_data)
-			cs_pin = (unsigned long) devices[i].controller_data;
-		else if (devices[i].bus_num == 0)
-			cs_pin = spi0_standard_cs[devices[i].chip_select];
-		else
-			cs_pin = spi1_standard_cs[devices[i].chip_select];
-
-		if (devices[i].bus_num == 0)
-			enable_spi0 = 1;
-		else
-			enable_spi1 = 1;
-
-		/* enable chip-select pin */
-		at91_set_gpio_output(cs_pin, 1);
-
-		/* pass chip-select pin to driver */
-		devices[i].controller_data = (void *) cs_pin;
-	}
-
-	spi_register_board_info(devices, nr_devices);
-
-	/* Configure SPI bus(es) */
-	if (enable_spi0) {
-		at91_set_A_periph(AT91_PIN_PA0, 0);	/* SPI0_MISO */
-		at91_set_A_periph(AT91_PIN_PA1, 0);	/* SPI0_MOSI */
-		at91_set_A_periph(AT91_PIN_PA2, 0);	/* SPI0_SPCK */
-
-		at91_clock_associate("spi0_clk", &at572d940hf_spi0_device.dev, "spi_clk");
-		platform_device_register(&at572d940hf_spi0_device);
-	}
-	if (enable_spi1) {
-		at91_set_A_periph(AT91_PIN_PC0, 0);	/* SPI1_MISO */
-		at91_set_A_periph(AT91_PIN_PC1, 0);	/* SPI1_MOSI */
-		at91_set_A_periph(AT91_PIN_PC2, 0);	/* SPI1_SPCK */
-
-		at91_clock_associate("spi1_clk", &at572d940hf_spi1_device.dev, "spi_clk");
-		platform_device_register(&at572d940hf_spi1_device);
-	}
-}
-#else
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  Timer/Counter blocks
- * -------------------------------------------------------------------- */
-
-#ifdef CONFIG_ATMEL_TCLIB
-
-static struct resource tcb_resources[] = {
-	[0] = {
-		.start	= AT572D940HF_BASE_TCB,
-		.end	= AT572D940HF_BASE_TCB + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT572D940HF_ID_TC0,
-		.end	= AT572D940HF_ID_TC0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= AT572D940HF_ID_TC1,
-		.end	= AT572D940HF_ID_TC1,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= AT572D940HF_ID_TC2,
-		.end	= AT572D940HF_ID_TC2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at572d940hf_tcb_device = {
-	.name		= "atmel_tcb",
-	.id		= 0,
-	.resource	= tcb_resources,
-	.num_resources	= ARRAY_SIZE(tcb_resources),
-};
-
-static void __init at91_add_device_tc(void)
-{
-	/* this chip has a separate clock and irq for each TC channel */
-	at91_clock_associate("tc0_clk", &at572d940hf_tcb_device.dev, "t0_clk");
-	at91_clock_associate("tc1_clk", &at572d940hf_tcb_device.dev, "t1_clk");
-	at91_clock_associate("tc2_clk", &at572d940hf_tcb_device.dev, "t2_clk");
-	platform_device_register(&at572d940hf_tcb_device);
-}
-#else
-static void __init at91_add_device_tc(void) { }
-#endif
-
-
-/* --------------------------------------------------------------------
- *  RTT
- * -------------------------------------------------------------------- */
-
-static struct resource rtt_resources[] = {
-	{
-		.start	= AT91_BASE_SYS + AT91_RTT,
-		.end	= AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device at572d940hf_rtt_device = {
-	.name		= "at91_rtt",
-	.id		= 0,
-	.resource	= rtt_resources,
-	.num_resources	= ARRAY_SIZE(rtt_resources),
-};
-
-static void __init at91_add_device_rtt(void)
-{
-	platform_device_register(&at572d940hf_rtt_device);
-}
-
-
-/* --------------------------------------------------------------------
- *  Watchdog
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
-static struct platform_device at572d940hf_wdt_device = {
-	.name		= "at91_wdt",
-	.id		= -1,
-	.num_resources	= 0,
-};
-
-static void __init at91_add_device_watchdog(void)
-{
-	platform_device_register(&at572d940hf_wdt_device);
-}
-#else
-static void __init at91_add_device_watchdog(void) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  UART
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SERIAL_ATMEL)
-static struct resource dbgu_resources[] = {
-	[0] = {
-		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
-		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91_ID_SYS,
-		.end	= AT91_ID_SYS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data dbgu_data = {
-	.use_dma_tx	= 0,
-	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
-	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
-};
-
-static u64 dbgu_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at572d940hf_dbgu_device = {
-	.name		= "atmel_usart",
-	.id		= 0,
-	.dev		= {
-				.dma_mask		= &dbgu_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &dbgu_data,
-	},
-	.resource	= dbgu_resources,
-	.num_resources	= ARRAY_SIZE(dbgu_resources),
-};
-
-static inline void configure_dbgu_pins(void)
-{
-	at91_set_A_periph(AT91_PIN_PC31, 1);		/* DTXD */
-	at91_set_A_periph(AT91_PIN_PC30, 0);		/* DRXD */
-}
-
-static struct resource uart0_resources[] = {
-	[0] = {
-		.start	= AT572D940HF_BASE_US0,
-		.end	= AT572D940HF_BASE_US0 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT572D940HF_ID_US0,
-		.end	= AT572D940HF_ID_US0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart0_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static u64 uart0_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at572d940hf_uart0_device = {
-	.name		= "atmel_usart",
-	.id		= 1,
-	.dev		= {
-				.dma_mask		= &uart0_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &uart0_data,
-	},
-	.resource	= uart0_resources,
-	.num_resources	= ARRAY_SIZE(uart0_resources),
-};
-
-static inline void configure_usart0_pins(unsigned pins)
-{
-	at91_set_A_periph(AT91_PIN_PA8, 1);		/* TXD0 */
-	at91_set_A_periph(AT91_PIN_PA7, 0);		/* RXD0 */
-
-	if (pins & ATMEL_UART_RTS)
-		at91_set_A_periph(AT91_PIN_PA10, 0);	/* RTS0 */
-	if (pins & ATMEL_UART_CTS)
-		at91_set_A_periph(AT91_PIN_PA9, 0);	/* CTS0 */
-}
-
-static struct resource uart1_resources[] = {
-	[0] = {
-		.start	= AT572D940HF_BASE_US1,
-		.end	= AT572D940HF_BASE_US1 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT572D940HF_ID_US1,
-		.end	= AT572D940HF_ID_US1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart1_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static u64 uart1_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at572d940hf_uart1_device = {
-	.name		= "atmel_usart",
-	.id		= 2,
-	.dev		= {
-				.dma_mask		= &uart1_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &uart1_data,
-	},
-	.resource	= uart1_resources,
-	.num_resources	= ARRAY_SIZE(uart1_resources),
-};
-
-static inline void configure_usart1_pins(unsigned pins)
-{
-	at91_set_A_periph(AT91_PIN_PC10, 1);		/* TXD1 */
-	at91_set_A_periph(AT91_PIN_PC9 , 0);		/* RXD1 */
-
-	if (pins & ATMEL_UART_RTS)
-		at91_set_A_periph(AT91_PIN_PC12, 0);	/* RTS1 */
-	if (pins & ATMEL_UART_CTS)
-		at91_set_A_periph(AT91_PIN_PC11, 0);	/* CTS1 */
-}
-
-static struct resource uart2_resources[] = {
-	[0] = {
-		.start	= AT572D940HF_BASE_US2,
-		.end	= AT572D940HF_BASE_US2 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT572D940HF_ID_US2,
-		.end	= AT572D940HF_ID_US2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart2_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static u64 uart2_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at572d940hf_uart2_device = {
-	.name		= "atmel_usart",
-	.id		= 3,
-	.dev		= {
-				.dma_mask		= &uart2_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &uart2_data,
-	},
-	.resource	= uart2_resources,
-	.num_resources	= ARRAY_SIZE(uart2_resources),
-};
-
-static inline void configure_usart2_pins(unsigned pins)
-{
-	at91_set_A_periph(AT91_PIN_PC15, 1);		/* TXD2 */
-	at91_set_A_periph(AT91_PIN_PC14, 0);		/* RXD2 */
-
-	if (pins & ATMEL_UART_RTS)
-		at91_set_A_periph(AT91_PIN_PC17, 0);	/* RTS2 */
-	if (pins & ATMEL_UART_CTS)
-		at91_set_A_periph(AT91_PIN_PC16, 0);	/* CTS2 */
-}
-
-static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
-struct platform_device *atmel_default_console_device;	/* the serial console device */
-
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
-{
-	struct platform_device *pdev;
-
-	switch (id) {
-		case 0:		/* DBGU */
-			pdev = &at572d940hf_dbgu_device;
-			configure_dbgu_pins();
-			at91_clock_associate("mck", &pdev->dev, "usart");
-			break;
-		case AT572D940HF_ID_US0:
-			pdev = &at572d940hf_uart0_device;
-			configure_usart0_pins(pins);
-			at91_clock_associate("usart0_clk", &pdev->dev, "usart");
-			break;
-		case AT572D940HF_ID_US1:
-			pdev = &at572d940hf_uart1_device;
-			configure_usart1_pins(pins);
-			at91_clock_associate("usart1_clk", &pdev->dev, "usart");
-			break;
-		case AT572D940HF_ID_US2:
-			pdev = &at572d940hf_uart2_device;
-			configure_usart2_pins(pins);
-			at91_clock_associate("usart2_clk", &pdev->dev, "usart");
-			break;
-		default:
-			return;
-	}
-	pdev->id = portnr;		/* update to mapped ID */
-
-	if (portnr < ATMEL_MAX_UART)
-		at91_uarts[portnr] = pdev;
-}
-
-void __init at91_set_serial_console(unsigned portnr)
-{
-	if (portnr < ATMEL_MAX_UART)
-		atmel_default_console_device = at91_uarts[portnr];
-}
-
-void __init at91_add_device_serial(void)
-{
-	int i;
-
-	for (i = 0; i < ATMEL_MAX_UART; i++) {
-		if (at91_uarts[i])
-			platform_device_register(at91_uarts[i]);
-	}
-
-	if (!atmel_default_console_device)
-		printk(KERN_INFO "AT91: No default serial console defined.\n");
-}
-
-#else
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_set_serial_console(unsigned portnr) {}
-void __init at91_add_device_serial(void) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  mAgic
- * -------------------------------------------------------------------- */
-
-#ifdef CONFIG_MAGICV
-static struct resource mAgic_resources[] = {
-	{
-		.start = AT91_MAGIC_PM_BASE,
-		.end   = AT91_MAGIC_PM_BASE + AT91_MAGIC_PM_SIZE - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = AT91_MAGIC_DM_I_BASE,
-		.end   = AT91_MAGIC_DM_I_BASE + AT91_MAGIC_DM_I_SIZE - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = AT91_MAGIC_DM_F_BASE,
-		.end   = AT91_MAGIC_DM_F_BASE + AT91_MAGIC_DM_F_SIZE - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = AT91_MAGIC_DM_DB_BASE,
-		.end   = AT91_MAGIC_DM_DB_BASE + AT91_MAGIC_DM_DB_SIZE - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = AT91_MAGIC_REGS_BASE,
-		.end   = AT91_MAGIC_REGS_BASE + AT91_MAGIC_REGS_SIZE - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = AT91_MAGIC_EXTPAGE_BASE,
-		.end   = AT91_MAGIC_EXTPAGE_BASE + AT91_MAGIC_EXTPAGE_SIZE - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start  = AT572D940HF_ID_MSIRQ0,
-		.end    = AT572D940HF_ID_MSIRQ0,
-		.flags  = IORESOURCE_IRQ,
-	},
-	{
-		.start  = AT572D940HF_ID_MHALT,
-		.end    = AT572D940HF_ID_MHALT,
-		.flags  = IORESOURCE_IRQ,
-	},
-	{
-		.start  = AT572D940HF_ID_MEXC,
-		.end    = AT572D940HF_ID_MEXC,
-		.flags  = IORESOURCE_IRQ,
-	},
-	{
-		.start  = AT572D940HF_ID_MEDMA,
-		.end    = AT572D940HF_ID_MEDMA,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device mAgic_device = {
-	.name           = "mAgic",
-	.id             = -1,
-	.num_resources  = ARRAY_SIZE(mAgic_resources),
-	.resource       = mAgic_resources,
-};
-
-void __init at91_add_device_mAgic(void)
-{
-	platform_device_register(&mAgic_device);
-}
-#else
-void __init at91_add_device_mAgic(void) {}
-#endif
-
-
-/* -------------------------------------------------------------------- */
-
-/*
- * These devices are always present and don't need any board-specific
- * setup.
- */
-static int __init at91_add_standard_devices(void)
-{
-	at91_add_device_rtt();
-	at91_add_device_watchdog();
-	at91_add_device_tc();
-	return 0;
-}
-
-arch_initcall(at91_add_standard_devices);
diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c
index 7337617..17fae4a 100644
--- a/arch/arm/mach-at91/at91cap9.c
+++ b/arch/arm/mach-at91/at91cap9.c
@@ -222,6 +222,25 @@ static struct clk *periph_clocks[] __initdata = {
 	// irq0 .. irq1
 };
 
+static struct clk_lookup periph_clocks_lookups[] = {
+	CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk),
+	CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk),
+	CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk),
+	CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk),
+	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
+	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
+	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk),
+	CLKDEV_CON_DEV_ID("ssc", "ssc.0", &ssc0_clk),
+	CLKDEV_CON_DEV_ID("ssc", "ssc.1", &ssc1_clk),
+};
+
+static struct clk_lookup usart_clocks_lookups[] = {
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
+};
+
 /*
  * The four programmable clocks.
  * You must configure pin multiplexing to bring these signals out.
@@ -258,12 +277,29 @@ static void __init at91cap9_register_clocks(void)
 	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
 		clk_register(periph_clocks[i]);
 
+	clkdev_add_table(periph_clocks_lookups,
+			 ARRAY_SIZE(periph_clocks_lookups));
+	clkdev_add_table(usart_clocks_lookups,
+			 ARRAY_SIZE(usart_clocks_lookups));
+
 	clk_register(&pck0);
 	clk_register(&pck1);
 	clk_register(&pck2);
 	clk_register(&pck3);
 }
 
+static struct clk_lookup console_clock_lookup;
+
+void __init at91cap9_set_console_clock(int id)
+{
+	if (id >= ARRAY_SIZE(usart_clocks_lookups))
+		return;
+
+	console_clock_lookup.con_id = "usart";
+	console_clock_lookup.clk = usart_clocks_lookups[id].clk;
+	clkdev_add(&console_clock_lookup);
+}
+
 /* --------------------------------------------------------------------
  *  GPIO
  * -------------------------------------------------------------------- */
@@ -303,11 +339,14 @@ static void at91cap9_poweroff(void)
  *  AT91CAP9 processor initialization
  * -------------------------------------------------------------------- */
 
-void __init at91cap9_initialize(unsigned long main_clock)
+void __init at91cap9_map_io(void)
 {
 	/* Map peripherals */
 	iotable_init(at91cap9_io_desc, ARRAY_SIZE(at91cap9_io_desc));
+}
 
+void __init at91cap9_initialize(unsigned long main_clock)
+{
 	at91_arch_reset = at91cap9_reset;
 	pm_power_off = at91cap9_poweroff;
 	at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1);
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
index 21020ce..cd850ed 100644
--- a/arch/arm/mach-at91/at91cap9_devices.c
+++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -181,10 +181,6 @@ void __init at91_add_device_usba(struct usba_platform_data *data)
 
 	/* Pullup pin is handled internally by USB device peripheral */
 
-	/* Clocks */
-	at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk");
-	at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk");
-
 	platform_device_register(&at91_usba_udc_device);
 }
 #else
@@ -355,7 +351,6 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
 		}
 
 		mmc0_data = *data;
-		at91_clock_associate("mci0_clk", &at91cap9_mmc0_device.dev, "mci_clk");
 		platform_device_register(&at91cap9_mmc0_device);
 	} else {			/* MCI1 */
 		/* CLK */
@@ -373,7 +368,6 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
 		}
 
 		mmc1_data = *data;
-		at91_clock_associate("mci1_clk", &at91cap9_mmc1_device.dev, "mci_clk");
 		platform_device_register(&at91cap9_mmc1_device);
 	}
 }
@@ -614,7 +608,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 		at91_set_B_periph(AT91_PIN_PA1, 0);	/* SPI0_MOSI */
 		at91_set_B_periph(AT91_PIN_PA2, 0);	/* SPI0_SPCK */
 
-		at91_clock_associate("spi0_clk", &at91cap9_spi0_device.dev, "spi_clk");
 		platform_device_register(&at91cap9_spi0_device);
 	}
 	if (enable_spi1) {
@@ -622,7 +615,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 		at91_set_A_periph(AT91_PIN_PB13, 0);	/* SPI1_MOSI */
 		at91_set_A_periph(AT91_PIN_PB14, 0);	/* SPI1_SPCK */
 
-		at91_clock_associate("spi1_clk", &at91cap9_spi1_device.dev, "spi_clk");
 		platform_device_register(&at91cap9_spi1_device);
 	}
 }
@@ -659,8 +651,6 @@ static struct platform_device at91cap9_tcb_device = {
 
 static void __init at91_add_device_tc(void)
 {
-	/* this chip has one clock and irq for all three TC channels */
-	at91_clock_associate("tcb_clk", &at91cap9_tcb_device.dev, "t0_clk");
 	platform_device_register(&at91cap9_tcb_device);
 }
 #else
@@ -1001,12 +991,10 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins)
 	case AT91CAP9_ID_SSC0:
 		pdev = &at91cap9_ssc0_device;
 		configure_ssc0_pins(pins);
-		at91_clock_associate("ssc0_clk", &pdev->dev, "ssc");
 		break;
 	case AT91CAP9_ID_SSC1:
 		pdev = &at91cap9_ssc1_device;
 		configure_ssc1_pins(pins);
-		at91_clock_associate("ssc1_clk", &pdev->dev, "ssc");
 		break;
 	default:
 		return;
@@ -1199,32 +1187,30 @@ struct platform_device *atmel_default_console_device;	/* the serial console devi
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 {
 	struct platform_device *pdev;
+	struct atmel_uart_data *pdata;
 
 	switch (id) {
 		case 0:		/* DBGU */
 			pdev = &at91cap9_dbgu_device;
 			configure_dbgu_pins();
-			at91_clock_associate("mck", &pdev->dev, "usart");
 			break;
 		case AT91CAP9_ID_US0:
 			pdev = &at91cap9_uart0_device;
 			configure_usart0_pins(pins);
-			at91_clock_associate("usart0_clk", &pdev->dev, "usart");
 			break;
 		case AT91CAP9_ID_US1:
 			pdev = &at91cap9_uart1_device;
 			configure_usart1_pins(pins);
-			at91_clock_associate("usart1_clk", &pdev->dev, "usart");
 			break;
 		case AT91CAP9_ID_US2:
 			pdev = &at91cap9_uart2_device;
 			configure_usart2_pins(pins);
-			at91_clock_associate("usart2_clk", &pdev->dev, "usart");
 			break;
 		default:
 			return;
 	}
-	pdev->id = portnr;		/* update to mapped ID */
+	pdata = pdev->dev.platform_data;
+	pdata->num = portnr;		/* update to mapped ID */
 
 	if (portnr < ATMEL_MAX_UART)
 		at91_uarts[portnr] = pdev;
@@ -1232,8 +1218,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 
 void __init at91_set_serial_console(unsigned portnr)
 {
-	if (portnr < ATMEL_MAX_UART)
+	if (portnr < ATMEL_MAX_UART) {
 		atmel_default_console_device = at91_uarts[portnr];
+		at91cap9_set_console_clock(portnr);
+	}
 }
 
 void __init at91_add_device_serial(void)
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index 2e9ecad..b228ce9 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -18,6 +18,7 @@
 #include <mach/at91rm9200.h>
 #include <mach/at91_pmc.h>
 #include <mach/at91_st.h>
+#include <mach/cpu.h>
 
 #include "generic.h"
 #include "clock.h"
@@ -191,6 +192,26 @@ static struct clk *periph_clocks[] __initdata = {
 	// irq0 .. irq6
 };
 
+static struct clk_lookup periph_clocks_lookups[] = {
+	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
+	CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
+	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
+	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk),
+	CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk),
+	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk),
+	CLKDEV_CON_DEV_ID("ssc", "ssc.0", &ssc0_clk),
+	CLKDEV_CON_DEV_ID("ssc", "ssc.1", &ssc1_clk),
+	CLKDEV_CON_DEV_ID("ssc", "ssc.2", &ssc2_clk),
+};
+
+static struct clk_lookup usart_clocks_lookups[] = {
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk),
+};
+
 /*
  * The four programmable clocks.
  * You must configure pin multiplexing to bring these signals out.
@@ -227,12 +248,29 @@ static void __init at91rm9200_register_clocks(void)
 	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
 		clk_register(periph_clocks[i]);
 
+	clkdev_add_table(periph_clocks_lookups,
+			 ARRAY_SIZE(periph_clocks_lookups));
+	clkdev_add_table(usart_clocks_lookups,
+			 ARRAY_SIZE(usart_clocks_lookups));
+
 	clk_register(&pck0);
 	clk_register(&pck1);
 	clk_register(&pck2);
 	clk_register(&pck3);
 }
 
+static struct clk_lookup console_clock_lookup;
+
+void __init at91rm9200_set_console_clock(int id)
+{
+	if (id >= ARRAY_SIZE(usart_clocks_lookups))
+		return;
+
+	console_clock_lookup.con_id = "usart";
+	console_clock_lookup.clk = usart_clocks_lookups[id].clk;
+	clkdev_add(&console_clock_lookup);
+}
+
 /* --------------------------------------------------------------------
  *  GPIO
  * -------------------------------------------------------------------- */
@@ -266,15 +304,25 @@ static void at91rm9200_reset(void)
 	at91_sys_write(AT91_ST_CR, AT91_ST_WDRST);
 }
 
+int rm9200_type;
+EXPORT_SYMBOL(rm9200_type);
+
+void __init at91rm9200_set_type(int type)
+{
+	rm9200_type = type;
+}
 
 /* --------------------------------------------------------------------
  *  AT91RM9200 processor initialization
  * -------------------------------------------------------------------- */
-void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks)
+void __init at91rm9200_map_io(void)
 {
 	/* Map peripherals */
 	iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc));
+}
 
+void __init at91rm9200_initialize(unsigned long main_clock)
+{
 	at91_arch_reset = at91rm9200_reset;
 	at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1)
 			| (1 << AT91RM9200_ID_IRQ2) | (1 << AT91RM9200_ID_IRQ3)
@@ -288,7 +336,8 @@ void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks
 	at91rm9200_register_clocks();
 
 	/* Initialize GPIO subsystem */
-	at91_gpio_init(at91rm9200_gpio, banks);
+	at91_gpio_init(at91rm9200_gpio,
+		cpu_is_at91rm9200_bga() ? AT91RM9200_BGA : AT91RM9200_PQFP);
 }
 
 
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 7b53922..a0ba475 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -644,15 +644,7 @@ static struct platform_device at91rm9200_tcb1_device = {
 
 static void __init at91_add_device_tc(void)
 {
-	/* this chip has a separate clock and irq for each TC channel */
-	at91_clock_associate("tc0_clk", &at91rm9200_tcb0_device.dev, "t0_clk");
-	at91_clock_associate("tc1_clk", &at91rm9200_tcb0_device.dev, "t1_clk");
-	at91_clock_associate("tc2_clk", &at91rm9200_tcb0_device.dev, "t2_clk");
 	platform_device_register(&at91rm9200_tcb0_device);
-
-	at91_clock_associate("tc3_clk", &at91rm9200_tcb1_device.dev, "t0_clk");
-	at91_clock_associate("tc4_clk", &at91rm9200_tcb1_device.dev, "t1_clk");
-	at91_clock_associate("tc5_clk", &at91rm9200_tcb1_device.dev, "t2_clk");
 	platform_device_register(&at91rm9200_tcb1_device);
 }
 #else
@@ -849,17 +841,14 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins)
 	case AT91RM9200_ID_SSC0:
 		pdev = &at91rm9200_ssc0_device;
 		configure_ssc0_pins(pins);
-		at91_clock_associate("ssc0_clk", &pdev->dev, "ssc");
 		break;
 	case AT91RM9200_ID_SSC1:
 		pdev = &at91rm9200_ssc1_device;
 		configure_ssc1_pins(pins);
-		at91_clock_associate("ssc1_clk", &pdev->dev, "ssc");
 		break;
 	case AT91RM9200_ID_SSC2:
 		pdev = &at91rm9200_ssc2_device;
 		configure_ssc2_pins(pins);
-		at91_clock_associate("ssc2_clk", &pdev->dev, "ssc");
 		break;
 	default:
 		return;
@@ -1109,37 +1098,34 @@ struct platform_device *atmel_default_console_device;	/* the serial console devi
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 {
 	struct platform_device *pdev;
+	struct atmel_uart_data *pdata;
 
 	switch (id) {
 		case 0:		/* DBGU */
 			pdev = &at91rm9200_dbgu_device;
 			configure_dbgu_pins();
-			at91_clock_associate("mck", &pdev->dev, "usart");
 			break;
 		case AT91RM9200_ID_US0:
 			pdev = &at91rm9200_uart0_device;
 			configure_usart0_pins(pins);
-			at91_clock_associate("usart0_clk", &pdev->dev, "usart");
 			break;
 		case AT91RM9200_ID_US1:
 			pdev = &at91rm9200_uart1_device;
 			configure_usart1_pins(pins);
-			at91_clock_associate("usart1_clk", &pdev->dev, "usart");
 			break;
 		case AT91RM9200_ID_US2:
 			pdev = &at91rm9200_uart2_device;
 			configure_usart2_pins(pins);
-			at91_clock_associate("usart2_clk", &pdev->dev, "usart");
 			break;
 		case AT91RM9200_ID_US3:
 			pdev = &at91rm9200_uart3_device;
 			configure_usart3_pins(pins);
-			at91_clock_associate("usart3_clk", &pdev->dev, "usart");
 			break;
 		default:
 			return;
 	}
-	pdev->id = portnr;		/* update to mapped ID */
+	pdata = pdev->dev.platform_data;
+	pdata->num = portnr;		/* update to mapped ID */
 
 	if (portnr < ATMEL_MAX_UART)
 		at91_uarts[portnr] = pdev;
@@ -1147,8 +1133,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 
 void __init at91_set_serial_console(unsigned portnr)
 {
-	if (portnr < ATMEL_MAX_UART)
+	if (portnr < ATMEL_MAX_UART) {
 		atmel_default_console_device = at91_uarts[portnr];
+		at91rm9200_set_console_clock(portnr);
+	}
 }
 
 void __init at91_add_device_serial(void)
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index 195208b..7d606b0 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -231,6 +231,28 @@ static struct clk *periph_clocks[] __initdata = {
 	// irq0 .. irq2
 };
 
+static struct clk_lookup periph_clocks_lookups[] = {
+	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
+	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
+	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
+	CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
+	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
+	CLKDEV_CON_DEV_ID("t3_clk", "atmel_tcb.1", &tc3_clk),
+	CLKDEV_CON_DEV_ID("t4_clk", "atmel_tcb.1", &tc4_clk),
+	CLKDEV_CON_DEV_ID("t5_clk", "atmel_tcb.1", &tc5_clk),
+	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk),
+};
+
+static struct clk_lookup usart_clocks_lookups[] = {
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.5", &usart4_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.6", &usart5_clk),
+};
+
 /*
  * The two programmable clocks.
  * You must configure pin multiplexing to bring these signals out.
@@ -255,10 +277,27 @@ static void __init at91sam9260_register_clocks(void)
 	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
 		clk_register(periph_clocks[i]);
 
+	clkdev_add_table(periph_clocks_lookups,
+			 ARRAY_SIZE(periph_clocks_lookups));
+	clkdev_add_table(usart_clocks_lookups,
+			 ARRAY_SIZE(usart_clocks_lookups));
+
 	clk_register(&pck0);
 	clk_register(&pck1);
 }
 
+static struct clk_lookup console_clock_lookup;
+
+void __init at91sam9260_set_console_clock(int id)
+{
+	if (id >= ARRAY_SIZE(usart_clocks_lookups))
+		return;
+
+	console_clock_lookup.con_id = "usart";
+	console_clock_lookup.clk = usart_clocks_lookups[id].clk;
+	clkdev_add(&console_clock_lookup);
+}
+
 /* --------------------------------------------------------------------
  *  GPIO
  * -------------------------------------------------------------------- */
@@ -289,7 +328,7 @@ static void at91sam9260_poweroff(void)
  *  AT91SAM9260 processor initialization
  * -------------------------------------------------------------------- */
 
-static void __init at91sam9xe_initialize(void)
+static void __init at91sam9xe_map_io(void)
 {
 	unsigned long cidr, sram_size;
 
@@ -310,18 +349,21 @@ static void __init at91sam9xe_initialize(void)
 	iotable_init(at91sam9xe_sram_desc, ARRAY_SIZE(at91sam9xe_sram_desc));
 }
 
-void __init at91sam9260_initialize(unsigned long main_clock)
+void __init at91sam9260_map_io(void)
 {
 	/* Map peripherals */
 	iotable_init(at91sam9260_io_desc, ARRAY_SIZE(at91sam9260_io_desc));
 
 	if (cpu_is_at91sam9xe())
-		at91sam9xe_initialize();
+		at91sam9xe_map_io();
 	else if (cpu_is_at91sam9g20())
 		iotable_init(at91sam9g20_sram_desc, ARRAY_SIZE(at91sam9g20_sram_desc));
 	else
 		iotable_init(at91sam9260_sram_desc, ARRAY_SIZE(at91sam9260_sram_desc));
+}
 
+void __init at91sam9260_initialize(unsigned long main_clock)
+{
 	at91_arch_reset = at91sam9_alt_reset;
 	pm_power_off = at91sam9260_poweroff;
 	at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1)
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 07eb7b0..1fdeb90 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -609,7 +609,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 		at91_set_A_periph(AT91_PIN_PA1, 0);	/* SPI0_MOSI */
 		at91_set_A_periph(AT91_PIN_PA2, 0);	/* SPI1_SPCK */
 
-		at91_clock_associate("spi0_clk", &at91sam9260_spi0_device.dev, "spi_clk");
 		platform_device_register(&at91sam9260_spi0_device);
 	}
 	if (enable_spi1) {
@@ -617,7 +616,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 		at91_set_A_periph(AT91_PIN_PB1, 0);	/* SPI1_MOSI */
 		at91_set_A_periph(AT91_PIN_PB2, 0);	/* SPI1_SPCK */
 
-		at91_clock_associate("spi1_clk", &at91sam9260_spi1_device.dev, "spi_clk");
 		platform_device_register(&at91sam9260_spi1_device);
 	}
 }
@@ -694,15 +692,7 @@ static struct platform_device at91sam9260_tcb1_device = {
 
 static void __init at91_add_device_tc(void)
 {
-	/* this chip has a separate clock and irq for each TC channel */
-	at91_clock_associate("tc0_clk", &at91sam9260_tcb0_device.dev, "t0_clk");
-	at91_clock_associate("tc1_clk", &at91sam9260_tcb0_device.dev, "t1_clk");
-	at91_clock_associate("tc2_clk", &at91sam9260_tcb0_device.dev, "t2_clk");
 	platform_device_register(&at91sam9260_tcb0_device);
-
-	at91_clock_associate("tc3_clk", &at91sam9260_tcb1_device.dev, "t0_clk");
-	at91_clock_associate("tc4_clk", &at91sam9260_tcb1_device.dev, "t1_clk");
-	at91_clock_associate("tc5_clk", &at91sam9260_tcb1_device.dev, "t2_clk");
 	platform_device_register(&at91sam9260_tcb1_device);
 }
 #else
@@ -820,7 +810,6 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins)
 	case AT91SAM9260_ID_SSC:
 		pdev = &at91sam9260_ssc_device;
 		configure_ssc_pins(pins);
-		at91_clock_associate("ssc_clk", &pdev->dev, "pclk");
 		break;
 	default:
 		return;
@@ -1139,47 +1128,42 @@ struct platform_device *atmel_default_console_device;	/* the serial console devi
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 {
 	struct platform_device *pdev;
+	struct atmel_uart_data *pdata;
 
 	switch (id) {
 		case 0:		/* DBGU */
 			pdev = &at91sam9260_dbgu_device;
 			configure_dbgu_pins();
-			at91_clock_associate("mck", &pdev->dev, "usart");
 			break;
 		case AT91SAM9260_ID_US0:
 			pdev = &at91sam9260_uart0_device;
 			configure_usart0_pins(pins);
-			at91_clock_associate("usart0_clk", &pdev->dev, "usart");
 			break;
 		case AT91SAM9260_ID_US1:
 			pdev = &at91sam9260_uart1_device;
 			configure_usart1_pins(pins);
-			at91_clock_associate("usart1_clk", &pdev->dev, "usart");
 			break;
 		case AT91SAM9260_ID_US2:
 			pdev = &at91sam9260_uart2_device;
 			configure_usart2_pins(pins);
-			at91_clock_associate("usart2_clk", &pdev->dev, "usart");
 			break;
 		case AT91SAM9260_ID_US3:
 			pdev = &at91sam9260_uart3_device;
 			configure_usart3_pins(pins);
-			at91_clock_associate("usart3_clk", &pdev->dev, "usart");
 			break;
 		case AT91SAM9260_ID_US4:
 			pdev = &at91sam9260_uart4_device;
 			configure_usart4_pins();
-			at91_clock_associate("usart4_clk", &pdev->dev, "usart");
 			break;
 		case AT91SAM9260_ID_US5:
 			pdev = &at91sam9260_uart5_device;
 			configure_usart5_pins();
-			at91_clock_associate("usart5_clk", &pdev->dev, "usart");
 			break;
 		default:
 			return;
 	}
-	pdev->id = portnr;		/* update to mapped ID */
+	pdata = pdev->dev.platform_data;
+	pdata->num = portnr;		/* update to mapped ID */
 
 	if (portnr < ATMEL_MAX_UART)
 		at91_uarts[portnr] = pdev;
@@ -1187,8 +1171,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 
 void __init at91_set_serial_console(unsigned portnr)
 {
-	if (portnr < ATMEL_MAX_UART)
+	if (portnr < ATMEL_MAX_UART) {
 		atmel_default_console_device = at91_uarts[portnr];
+		at91sam9260_set_console_clock(portnr);
+	}
 }
 
 void __init at91_add_device_serial(void)
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index fcad886..c148316 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -178,6 +178,24 @@ static struct clk *periph_clocks[] __initdata = {
 	// irq0 .. irq2
 };
 
+static struct clk_lookup periph_clocks_lookups[] = {
+	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
+	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
+	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
+	CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
+	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc1_clk),
+	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
+	CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
+	CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk),
+};
+
+static struct clk_lookup usart_clocks_lookups[] = {
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
+};
+
 /*
  * The four programmable clocks.
  * You must configure pin multiplexing to bring these signals out.
@@ -228,6 +246,11 @@ static void __init at91sam9261_register_clocks(void)
 	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
 		clk_register(periph_clocks[i]);
 
+	clkdev_add_table(periph_clocks_lookups,
+			 ARRAY_SIZE(periph_clocks_lookups));
+	clkdev_add_table(usart_clocks_lookups,
+			 ARRAY_SIZE(usart_clocks_lookups));
+
 	clk_register(&pck0);
 	clk_register(&pck1);
 	clk_register(&pck2);
@@ -237,6 +260,18 @@ static void __init at91sam9261_register_clocks(void)
 	clk_register(&hck1);
 }
 
+static struct clk_lookup console_clock_lookup;
+
+void __init at91sam9261_set_console_clock(int id)
+{
+	if (id >= ARRAY_SIZE(usart_clocks_lookups))
+		return;
+
+	console_clock_lookup.con_id = "usart";
+	console_clock_lookup.clk = usart_clocks_lookups[id].clk;
+	clkdev_add(&console_clock_lookup);
+}
+
 /* --------------------------------------------------------------------
  *  GPIO
  * -------------------------------------------------------------------- */
@@ -267,7 +302,7 @@ static void at91sam9261_poweroff(void)
  *  AT91SAM9261 processor initialization
  * -------------------------------------------------------------------- */
 
-void __init at91sam9261_initialize(unsigned long main_clock)
+void __init at91sam9261_map_io(void)
 {
 	/* Map peripherals */
 	iotable_init(at91sam9261_io_desc, ARRAY_SIZE(at91sam9261_io_desc));
@@ -276,8 +311,10 @@ void __init at91sam9261_initialize(unsigned long main_clock)
 		iotable_init(at91sam9g10_sram_desc, ARRAY_SIZE(at91sam9g10_sram_desc));
 	else
 		iotable_init(at91sam9261_sram_desc, ARRAY_SIZE(at91sam9261_sram_desc));
+}
 
-
+void __init at91sam9261_initialize(unsigned long main_clock)
+{
 	at91_arch_reset = at91sam9_alt_reset;
 	pm_power_off = at91sam9261_poweroff;
 	at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 59fc483..3eb4538 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -426,7 +426,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 		at91_set_A_periph(AT91_PIN_PA1, 0);	/* SPI0_MOSI */
 		at91_set_A_periph(AT91_PIN_PA2, 0);	/* SPI0_SPCK */
 
-		at91_clock_associate("spi0_clk", &at91sam9261_spi0_device.dev, "spi_clk");
 		platform_device_register(&at91sam9261_spi0_device);
 	}
 	if (enable_spi1) {
@@ -434,7 +433,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 		at91_set_A_periph(AT91_PIN_PB31, 0);	/* SPI1_MOSI */
 		at91_set_A_periph(AT91_PIN_PB29, 0);	/* SPI1_SPCK */
 
-		at91_clock_associate("spi1_clk", &at91sam9261_spi1_device.dev, "spi_clk");
 		platform_device_register(&at91sam9261_spi1_device);
 	}
 }
@@ -581,10 +579,6 @@ static struct platform_device at91sam9261_tcb_device = {
 
 static void __init at91_add_device_tc(void)
 {
-	/* this chip has a separate clock and irq for each TC channel */
-	at91_clock_associate("tc0_clk", &at91sam9261_tcb_device.dev, "t0_clk");
-	at91_clock_associate("tc1_clk", &at91sam9261_tcb_device.dev, "t1_clk");
-	at91_clock_associate("tc2_clk", &at91sam9261_tcb_device.dev, "t2_clk");
 	platform_device_register(&at91sam9261_tcb_device);
 }
 #else
@@ -786,17 +780,14 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins)
 	case AT91SAM9261_ID_SSC0:
 		pdev = &at91sam9261_ssc0_device;
 		configure_ssc0_pins(pins);
-		at91_clock_associate("ssc0_clk", &pdev->dev, "pclk");
 		break;
 	case AT91SAM9261_ID_SSC1:
 		pdev = &at91sam9261_ssc1_device;
 		configure_ssc1_pins(pins);
-		at91_clock_associate("ssc1_clk", &pdev->dev, "pclk");
 		break;
 	case AT91SAM9261_ID_SSC2:
 		pdev = &at91sam9261_ssc2_device;
 		configure_ssc2_pins(pins);
-		at91_clock_associate("ssc2_clk", &pdev->dev, "pclk");
 		break;
 	default:
 		return;
@@ -989,32 +980,30 @@ struct platform_device *atmel_default_console_device;	/* the serial console devi
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 {
 	struct platform_device *pdev;
+	struct atmel_uart_data *pdata;
 
 	switch (id) {
 		case 0:		/* DBGU */
 			pdev = &at91sam9261_dbgu_device;
 			configure_dbgu_pins();
-			at91_clock_associate("mck", &pdev->dev, "usart");
 			break;
 		case AT91SAM9261_ID_US0:
 			pdev = &at91sam9261_uart0_device;
 			configure_usart0_pins(pins);
-			at91_clock_associate("usart0_clk", &pdev->dev, "usart");
 			break;
 		case AT91SAM9261_ID_US1:
 			pdev = &at91sam9261_uart1_device;
 			configure_usart1_pins(pins);
-			at91_clock_associate("usart1_clk", &pdev->dev, "usart");
 			break;
 		case AT91SAM9261_ID_US2:
 			pdev = &at91sam9261_uart2_device;
 			configure_usart2_pins(pins);
-			at91_clock_associate("usart2_clk", &pdev->dev, "usart");
 			break;
 		default:
 			return;
 	}
-	pdev->id = portnr;		/* update to mapped ID */
+	pdata = pdev->dev.platform_data;
+	pdata->num = portnr;		/* update to mapped ID */
 
 	if (portnr < ATMEL_MAX_UART)
 		at91_uarts[portnr] = pdev;
@@ -1022,8 +1011,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 
 void __init at91_set_serial_console(unsigned portnr)
 {
-	if (portnr < ATMEL_MAX_UART)
+	if (portnr < ATMEL_MAX_UART) {
 		atmel_default_console_device = at91_uarts[portnr];
+		at91sam9261_set_console_clock(portnr);
+	}
 }
 
 void __init at91_add_device_serial(void)
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index 249f900..dc28477 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -199,6 +199,23 @@ static struct clk *periph_clocks[] __initdata = {
 	// irq0 .. irq1
 };
 
+static struct clk_lookup periph_clocks_lookups[] = {
+	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
+	CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
+	CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk),
+	CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk),
+	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
+	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
+	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk),
+};
+
+static struct clk_lookup usart_clocks_lookups[] = {
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
+};
+
 /*
  * The four programmable clocks.
  * You must configure pin multiplexing to bring these signals out.
@@ -235,12 +252,29 @@ static void __init at91sam9263_register_clocks(void)
 	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
 		clk_register(periph_clocks[i]);
 
+	clkdev_add_table(periph_clocks_lookups,
+			 ARRAY_SIZE(periph_clocks_lookups));
+	clkdev_add_table(usart_clocks_lookups,
+			 ARRAY_SIZE(usart_clocks_lookups));
+
 	clk_register(&pck0);
 	clk_register(&pck1);
 	clk_register(&pck2);
 	clk_register(&pck3);
 }
 
+static struct clk_lookup console_clock_lookup;
+
+void __init at91sam9263_set_console_clock(int id)
+{
+	if (id >= ARRAY_SIZE(usart_clocks_lookups))
+		return;
+
+	console_clock_lookup.con_id = "usart";
+	console_clock_lookup.clk = usart_clocks_lookups[id].clk;
+	clkdev_add(&console_clock_lookup);
+}
+
 /* --------------------------------------------------------------------
  *  GPIO
  * -------------------------------------------------------------------- */
@@ -279,11 +313,14 @@ static void at91sam9263_poweroff(void)
  *  AT91SAM9263 processor initialization
  * -------------------------------------------------------------------- */
 
-void __init at91sam9263_initialize(unsigned long main_clock)
+void __init at91sam9263_map_io(void)
 {
 	/* Map peripherals */
 	iotable_init(at91sam9263_io_desc, ARRAY_SIZE(at91sam9263_io_desc));
+}
 
+void __init at91sam9263_initialize(unsigned long main_clock)
+{
 	at91_arch_reset = at91sam9_alt_reset;
 	pm_power_off = at91sam9263_poweroff;
 	at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1);
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index fb5c23a..ffe081b 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -308,7 +308,6 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
 		}
 
 		mmc0_data = *data;
-		at91_clock_associate("mci0_clk", &at91sam9263_mmc0_device.dev, "mci_clk");
 		platform_device_register(&at91sam9263_mmc0_device);
 	} else {			/* MCI1 */
 		/* CLK */
@@ -339,7 +338,6 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
 		}
 
 		mmc1_data = *data;
-		at91_clock_associate("mci1_clk", &at91sam9263_mmc1_device.dev, "mci_clk");
 		platform_device_register(&at91sam9263_mmc1_device);
 	}
 }
@@ -686,7 +684,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 		at91_set_B_periph(AT91_PIN_PA1, 0);	/* SPI0_MOSI */
 		at91_set_B_periph(AT91_PIN_PA2, 0);	/* SPI0_SPCK */
 
-		at91_clock_associate("spi0_clk", &at91sam9263_spi0_device.dev, "spi_clk");
 		platform_device_register(&at91sam9263_spi0_device);
 	}
 	if (enable_spi1) {
@@ -694,7 +691,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 		at91_set_A_periph(AT91_PIN_PB13, 0);	/* SPI1_MOSI */
 		at91_set_A_periph(AT91_PIN_PB14, 0);	/* SPI1_SPCK */
 
-		at91_clock_associate("spi1_clk", &at91sam9263_spi1_device.dev, "spi_clk");
 		platform_device_register(&at91sam9263_spi1_device);
 	}
 }
@@ -941,8 +937,6 @@ static struct platform_device at91sam9263_tcb_device = {
 
 static void __init at91_add_device_tc(void)
 {
-	/* this chip has one clock and irq for all three TC channels */
-	at91_clock_associate("tcb_clk", &at91sam9263_tcb_device.dev, "t0_clk");
 	platform_device_register(&at91sam9263_tcb_device);
 }
 #else
@@ -1171,12 +1165,10 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins)
 	case AT91SAM9263_ID_SSC0:
 		pdev = &at91sam9263_ssc0_device;
 		configure_ssc0_pins(pins);
-		at91_clock_associate("ssc0_clk", &pdev->dev, "pclk");
 		break;
 	case AT91SAM9263_ID_SSC1:
 		pdev = &at91sam9263_ssc1_device;
 		configure_ssc1_pins(pins);
-		at91_clock_associate("ssc1_clk", &pdev->dev, "pclk");
 		break;
 	default:
 		return;
@@ -1370,32 +1362,30 @@ struct platform_device *atmel_default_console_device;	/* the serial console devi
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 {
 	struct platform_device *pdev;
+	struct atmel_uart_data *pdata;
 
 	switch (id) {
 		case 0:		/* DBGU */
 			pdev = &at91sam9263_dbgu_device;
 			configure_dbgu_pins();
-			at91_clock_associate("mck", &pdev->dev, "usart");
 			break;
 		case AT91SAM9263_ID_US0:
 			pdev = &at91sam9263_uart0_device;
 			configure_usart0_pins(pins);
-			at91_clock_associate("usart0_clk", &pdev->dev, "usart");
 			break;
 		case AT91SAM9263_ID_US1:
 			pdev = &at91sam9263_uart1_device;
 			configure_usart1_pins(pins);
-			at91_clock_associate("usart1_clk", &pdev->dev, "usart");
 			break;
 		case AT91SAM9263_ID_US2:
 			pdev = &at91sam9263_uart2_device;
 			configure_usart2_pins(pins);
-			at91_clock_associate("usart2_clk", &pdev->dev, "usart");
 			break;
 		default:
 			return;
 	}
-	pdev->id = portnr;		/* update to mapped ID */
+	pdata = pdev->dev.platform_data;
+	pdata->num = portnr;		/* update to mapped ID */
 
 	if (portnr < ATMEL_MAX_UART)
 		at91_uarts[portnr] = pdev;
@@ -1403,8 +1393,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 
 void __init at91_set_serial_console(unsigned portnr)
 {
-	if (portnr < ATMEL_MAX_UART)
+	if (portnr < ATMEL_MAX_UART) {
 		atmel_default_console_device = at91_uarts[portnr];
+		at91sam9263_set_console_clock(portnr);
+	}
 }
 
 void __init at91_add_device_serial(void)
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index c67b47f..2bb6ff9 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -184,22 +184,6 @@ static struct clk vdec_clk = {
 	.type		= CLK_TYPE_PERIPHERAL,
 };
 
-/* One additional fake clock for ohci */
-static struct clk ohci_clk = {
-	.name		= "ohci_clk",
-	.pmc_mask	= 0,
-	.type		= CLK_TYPE_PERIPHERAL,
-	.parent		= &uhphs_clk,
-};
-
-/* One additional fake clock for second TC block */
-static struct clk tcb1_clk = {
-	.name		= "tcb1_clk",
-	.pmc_mask	= 0,
-	.type		= CLK_TYPE_PERIPHERAL,
-	.parent		= &tcb0_clk,
-};
-
 static struct clk *periph_clocks[] __initdata = {
 	&pioA_clk,
 	&pioB_clk,
@@ -228,8 +212,30 @@ static struct clk *periph_clocks[] __initdata = {
 	&udphs_clk,
 	&mmc1_clk,
 	// irq0
-	&ohci_clk,
-	&tcb1_clk,
+};
+
+static struct clk_lookup periph_clocks_lookups[] = {
+	/* One additional fake clock for ohci */
+	CLKDEV_CON_ID("ohci_clk", &uhphs_clk),
+	CLKDEV_CON_DEV_ID("ehci_clk", "atmel-ehci.0", &uhphs_clk),
+	CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk),
+	CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk),
+	CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk),
+	CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk),
+	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
+	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
+	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb0_clk),
+	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tcb0_clk),
+	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
+	CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
+};
+
+static struct clk_lookup usart_clocks_lookups[] = {
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk),
 };
 
 /*
@@ -256,6 +262,11 @@ static void __init at91sam9g45_register_clocks(void)
 	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
 		clk_register(periph_clocks[i]);
 
+	clkdev_add_table(periph_clocks_lookups,
+			 ARRAY_SIZE(periph_clocks_lookups));
+	clkdev_add_table(usart_clocks_lookups,
+			 ARRAY_SIZE(usart_clocks_lookups));
+
 	if (cpu_is_at91sam9m10() || cpu_is_at91sam9m11())
 		clk_register(&vdec_clk);
 
@@ -263,6 +274,18 @@ static void __init at91sam9g45_register_clocks(void)
 	clk_register(&pck1);
 }
 
+static struct clk_lookup console_clock_lookup;
+
+void __init at91sam9g45_set_console_clock(int id)
+{
+	if (id >= ARRAY_SIZE(usart_clocks_lookups))
+		return;
+
+	console_clock_lookup.con_id = "usart";
+	console_clock_lookup.clk = usart_clocks_lookups[id].clk;
+	clkdev_add(&console_clock_lookup);
+}
+
 /* --------------------------------------------------------------------
  *  GPIO
  * -------------------------------------------------------------------- */
@@ -306,11 +329,14 @@ static void at91sam9g45_poweroff(void)
  *  AT91SAM9G45 processor initialization
  * -------------------------------------------------------------------- */
 
-void __init at91sam9g45_initialize(unsigned long main_clock)
+void __init at91sam9g45_map_io(void)
 {
 	/* Map peripherals */
 	iotable_init(at91sam9g45_io_desc, ARRAY_SIZE(at91sam9g45_io_desc));
+}
 
+void __init at91sam9g45_initialize(unsigned long main_clock)
+{
 	at91_arch_reset = at91sam9g45_reset;
 	pm_power_off = at91sam9g45_poweroff;
 	at91_extern_irq = (1 << AT91SAM9G45_ID_IRQ0);
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 5e9f8a4..0567486 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -180,7 +180,6 @@ void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data)
 	}
 
 	usbh_ehci_data = *data;
-	at91_clock_associate("uhphs_clk", &at91_usbh_ehci_device.dev, "ehci_clk");
 	platform_device_register(&at91_usbh_ehci_device);
 }
 #else
@@ -266,10 +265,6 @@ void __init at91_add_device_usba(struct usba_platform_data *data)
 
 	/* Pullup pin is handled internally by USB device peripheral */
 
-	/* Clocks */
-	at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk");
-	at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk");
-
 	platform_device_register(&at91_usba_udc_device);
 }
 #else
@@ -478,7 +473,6 @@ void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
 		}
 
 		mmc0_data = *data;
-		at91_clock_associate("mci0_clk", &at91sam9g45_mmc0_device.dev, "mci_clk");
 		platform_device_register(&at91sam9g45_mmc0_device);
 
 	} else {			/* MCI1 */
@@ -504,7 +498,6 @@ void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
 		}
 
 		mmc1_data = *data;
-		at91_clock_associate("mci1_clk", &at91sam9g45_mmc1_device.dev, "mci_clk");
 		platform_device_register(&at91sam9g45_mmc1_device);
 
 	}
@@ -801,7 +794,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 		at91_set_A_periph(AT91_PIN_PB1, 0);	/* SPI0_MOSI */
 		at91_set_A_periph(AT91_PIN_PB2, 0);	/* SPI0_SPCK */
 
-		at91_clock_associate("spi0_clk", &at91sam9g45_spi0_device.dev, "spi_clk");
 		platform_device_register(&at91sam9g45_spi0_device);
 	}
 	if (enable_spi1) {
@@ -809,7 +801,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 		at91_set_A_periph(AT91_PIN_PB15, 0);	/* SPI1_MOSI */
 		at91_set_A_periph(AT91_PIN_PB16, 0);	/* SPI1_SPCK */
 
-		at91_clock_associate("spi1_clk", &at91sam9g45_spi1_device.dev, "spi_clk");
 		platform_device_register(&at91sam9g45_spi1_device);
 	}
 }
@@ -999,10 +990,7 @@ static struct platform_device at91sam9g45_tcb1_device = {
 
 static void __init at91_add_device_tc(void)
 {
-	/* this chip has one clock and irq for all six TC channels */
-	at91_clock_associate("tcb0_clk", &at91sam9g45_tcb0_device.dev, "t0_clk");
 	platform_device_register(&at91sam9g45_tcb0_device);
-	at91_clock_associate("tcb1_clk", &at91sam9g45_tcb1_device.dev, "t0_clk");
 	platform_device_register(&at91sam9g45_tcb1_device);
 }
 #else
@@ -1286,12 +1274,10 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins)
 	case AT91SAM9G45_ID_SSC0:
 		pdev = &at91sam9g45_ssc0_device;
 		configure_ssc0_pins(pins);
-		at91_clock_associate("ssc0_clk", &pdev->dev, "pclk");
 		break;
 	case AT91SAM9G45_ID_SSC1:
 		pdev = &at91sam9g45_ssc1_device;
 		configure_ssc1_pins(pins);
-		at91_clock_associate("ssc1_clk", &pdev->dev, "pclk");
 		break;
 	default:
 		return;
@@ -1527,37 +1513,34 @@ struct platform_device *atmel_default_console_device;	/* the serial console devi
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 {
 	struct platform_device *pdev;
+	struct atmel_uart_data *pdata;
 
 	switch (id) {
 		case 0:		/* DBGU */
 			pdev = &at91sam9g45_dbgu_device;
 			configure_dbgu_pins();
-			at91_clock_associate("mck", &pdev->dev, "usart");
 			break;
 		case AT91SAM9G45_ID_US0:
 			pdev = &at91sam9g45_uart0_device;
 			configure_usart0_pins(pins);
-			at91_clock_associate("usart0_clk", &pdev->dev, "usart");
 			break;
 		case AT91SAM9G45_ID_US1:
 			pdev = &at91sam9g45_uart1_device;
 			configure_usart1_pins(pins);
-			at91_clock_associate("usart1_clk", &pdev->dev, "usart");
 			break;
 		case AT91SAM9G45_ID_US2:
 			pdev = &at91sam9g45_uart2_device;
 			configure_usart2_pins(pins);
-			at91_clock_associate("usart2_clk", &pdev->dev, "usart");
 			break;
 		case AT91SAM9G45_ID_US3:
 			pdev = &at91sam9g45_uart3_device;
 			configure_usart3_pins(pins);
-			at91_clock_associate("usart3_clk", &pdev->dev, "usart");
 			break;
 		default:
 			return;
 	}
-	pdev->id = portnr;		/* update to mapped ID */
+	pdata = pdev->dev.platform_data;
+	pdata->num = portnr;		/* update to mapped ID */
 
 	if (portnr < ATMEL_MAX_UART)
 		at91_uarts[portnr] = pdev;
@@ -1565,8 +1548,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 
 void __init at91_set_serial_console(unsigned portnr)
 {
-	if (portnr < ATMEL_MAX_UART)
+	if (portnr < ATMEL_MAX_UART) {
 		atmel_default_console_device = at91_uarts[portnr];
+		at91sam9g45_set_console_clock(portnr);
+	}
 }
 
 void __init at91_add_device_serial(void)
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index 6a9d24e..1a40f16 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -190,6 +190,24 @@ static struct clk *periph_clocks[] __initdata = {
 	// irq0
 };
 
+static struct clk_lookup periph_clocks_lookups[] = {
+	CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk),
+	CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk),
+	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
+	CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
+	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
+	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
+	CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
+};
+
+static struct clk_lookup usart_clocks_lookups[] = {
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk),
+};
+
 /*
  * The two programmable clocks.
  * You must configure pin multiplexing to bring these signals out.
@@ -214,10 +232,27 @@ static void __init at91sam9rl_register_clocks(void)
 	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
 		clk_register(periph_clocks[i]);
 
+	clkdev_add_table(periph_clocks_lookups,
+			 ARRAY_SIZE(periph_clocks_lookups));
+	clkdev_add_table(usart_clocks_lookups,
+			 ARRAY_SIZE(usart_clocks_lookups));
+
 	clk_register(&pck0);
 	clk_register(&pck1);
 }
 
+static struct clk_lookup console_clock_lookup;
+
+void __init at91sam9rl_set_console_clock(int id)
+{
+	if (id >= ARRAY_SIZE(usart_clocks_lookups))
+		return;
+
+	console_clock_lookup.con_id = "usart";
+	console_clock_lookup.clk = usart_clocks_lookups[id].clk;
+	clkdev_add(&console_clock_lookup);
+}
+
 /* --------------------------------------------------------------------
  *  GPIO
  * -------------------------------------------------------------------- */
@@ -252,7 +287,7 @@ static void at91sam9rl_poweroff(void)
  *  AT91SAM9RL processor initialization
  * -------------------------------------------------------------------- */
 
-void __init at91sam9rl_initialize(unsigned long main_clock)
+void __init at91sam9rl_map_io(void)
 {
 	unsigned long cidr, sram_size;
 
@@ -275,7 +310,10 @@ void __init at91sam9rl_initialize(unsigned long main_clock)
 
 	/* Map SRAM */
 	iotable_init(at91sam9rl_sram_desc, ARRAY_SIZE(at91sam9rl_sram_desc));
+}
 
+void __init at91sam9rl_initialize(unsigned long main_clock)
+{
 	at91_arch_reset = at91sam9_alt_reset;
 	pm_power_off = at91sam9rl_poweroff;
 	at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0);
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index c49262b..c296045f 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -155,10 +155,6 @@ void __init at91_add_device_usba(struct usba_platform_data *data)
 
 	/* Pullup pin is handled internally by USB device peripheral */
 
-	/* Clocks */
-	at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk");
-	at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk");
-
 	platform_device_register(&at91_usba_udc_device);
 }
 #else
@@ -605,10 +601,6 @@ static struct platform_device at91sam9rl_tcb_device = {
 
 static void __init at91_add_device_tc(void)
 {
-	/* this chip has a separate clock and irq for each TC channel */
-	at91_clock_associate("tc0_clk", &at91sam9rl_tcb_device.dev, "t0_clk");
-	at91_clock_associate("tc1_clk", &at91sam9rl_tcb_device.dev, "t1_clk");
-	at91_clock_associate("tc2_clk", &at91sam9rl_tcb_device.dev, "t2_clk");
 	platform_device_register(&at91sam9rl_tcb_device);
 }
 #else
@@ -892,12 +884,10 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins)
 	case AT91SAM9RL_ID_SSC0:
 		pdev = &at91sam9rl_ssc0_device;
 		configure_ssc0_pins(pins);
-		at91_clock_associate("ssc0_clk", &pdev->dev, "pclk");
 		break;
 	case AT91SAM9RL_ID_SSC1:
 		pdev = &at91sam9rl_ssc1_device;
 		configure_ssc1_pins(pins);
-		at91_clock_associate("ssc1_clk", &pdev->dev, "pclk");
 		break;
 	default:
 		return;
@@ -1141,37 +1131,34 @@ struct platform_device *atmel_default_console_device;	/* the serial console devi
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 {
 	struct platform_device *pdev;
+	struct atmel_uart_data *pdata;
 
 	switch (id) {
 		case 0:		/* DBGU */
 			pdev = &at91sam9rl_dbgu_device;
 			configure_dbgu_pins();
-			at91_clock_associate("mck", &pdev->dev, "usart");
 			break;
 		case AT91SAM9RL_ID_US0:
 			pdev = &at91sam9rl_uart0_device;
 			configure_usart0_pins(pins);
-			at91_clock_associate("usart0_clk", &pdev->dev, "usart");
 			break;
 		case AT91SAM9RL_ID_US1:
 			pdev = &at91sam9rl_uart1_device;
 			configure_usart1_pins(pins);
-			at91_clock_associate("usart1_clk", &pdev->dev, "usart");
 			break;
 		case AT91SAM9RL_ID_US2:
 			pdev = &at91sam9rl_uart2_device;
 			configure_usart2_pins(pins);
-			at91_clock_associate("usart2_clk", &pdev->dev, "usart");
 			break;
 		case AT91SAM9RL_ID_US3:
 			pdev = &at91sam9rl_uart3_device;
 			configure_usart3_pins(pins);
-			at91_clock_associate("usart3_clk", &pdev->dev, "usart");
 			break;
 		default:
 			return;
 	}
-	pdev->id = portnr;		/* update to mapped ID */
+	pdata = pdev->dev.platform_data;
+	pdata->num = portnr;		/* update to mapped ID */
 
 	if (portnr < ATMEL_MAX_UART)
 		at91_uarts[portnr] = pdev;
@@ -1179,8 +1166,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 
 void __init at91_set_serial_console(unsigned portnr)
 {
-	if (portnr < ATMEL_MAX_UART)
+	if (portnr < ATMEL_MAX_UART) {
 		atmel_default_console_device = at91_uarts[portnr];
+		at91sam9rl_set_console_clock(portnr);
+	}
 }
 
 void __init at91_add_device_serial(void)
diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c
index ad3ec85..56ba3bd 100644
--- a/arch/arm/mach-at91/at91x40.c
+++ b/arch/arm/mach-at91/at91x40.c
@@ -37,11 +37,6 @@ unsigned long clk_get_rate(struct clk *clk)
 	return AT91X40_MASTER_CLOCK;
 }
 
-struct clk *clk_get(struct device *dev, const char *id)
-{
-	return NULL;
-}
-
 void __init at91x40_initialize(unsigned long main_clock)
 {
 	at91_extern_irq = (1 << AT91X40_ID_IRQ0) | (1 << AT91X40_ID_IRQ1)
diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c
index 8a3fc84..ab1d463 100644
--- a/arch/arm/mach-at91/board-1arm.c
+++ b/arch/arm/mach-at91/board-1arm.c
@@ -35,14 +35,18 @@
 
 #include <mach/board.h>
 #include <mach/gpio.h>
+#include <mach/cpu.h>
 
 #include "generic.h"
 
 
-static void __init onearm_map_io(void)
+static void __init onearm_init_early(void)
 {
+	/* Set cpu type: PQFP */
+	at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
+
 	/* Initialize processor: 18.432 MHz crystal */
-	at91rm9200_initialize(18432000, AT91RM9200_PQFP);
+	at91rm9200_initialize(18432000);
 
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
@@ -92,9 +96,9 @@ static void __init onearm_board_init(void)
 
 MACHINE_START(ONEARM, "Ajeco 1ARM single board computer")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91rm9200_timer,
-	.map_io		= onearm_map_io,
+	.map_io		= at91rm9200_map_io,
+	.init_early	= onearm_init_early,
 	.init_irq	= onearm_init_irq,
 	.init_machine	= onearm_board_init,
 MACHINE_END
diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
index cba7f77..a4924de 100644
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -48,7 +48,7 @@
 #include "generic.h"
 
 
-static void __init afeb9260_map_io(void)
+static void __init afeb9260_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91sam9260_initialize(18432000);
@@ -218,9 +218,9 @@ static void __init afeb9260_board_init(void)
 
 MACHINE_START(AFEB9260, "Custom afeb9260 board")
 	/* Maintainer: Sergey Lapin <slapin@ossfans.org> */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
-	.map_io		= afeb9260_map_io,
+	.map_io		= at91sam9260_map_io,
+	.init_early	= afeb9260_init_early,
 	.init_irq	= afeb9260_init_irq,
 	.init_machine	= afeb9260_board_init,
 MACHINE_END
diff --git a/arch/arm/mach-at91/board-at572d940hf_ek.c b/arch/arm/mach-at91/board-at572d940hf_ek.c
deleted file mode 100644
index 3929f1c..0000000
--- a/arch/arm/mach-at91/board-at572d940hf_ek.c
+++ /dev/null
@@ -1,326 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-at572d940hf_ek.c
- *
- * Copyright (C) 2008 Atmel Antonio R. Costa <costa.antonior@gmail.com>
- * Copyright (C) 2005 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ds1305.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/board.h>
-#include <mach/gpio.h>
-#include <mach/at91sam9_smc.h>
-
-#include "sam9_smc.h"
-#include "generic.h"
-
-
-static void __init eb_map_io(void)
-{
-	/* Initialize processor: 12.500 MHz crystal */
-	at572d940hf_initialize(12000000);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1. (Rx & Tx only) */
-	at91_register_uart(AT572D940HF_ID_US0, 1, 0);
-
-	/* USART1 on ttyS2. (Rx & Tx only) */
-	at91_register_uart(AT572D940HF_ID_US1, 2, 0);
-
-	/* USART2 on ttyS3. (Tx & Rx only */
-	at91_register_uart(AT572D940HF_ID_US2, 3, 0);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
-}
-
-static void __init eb_init_irq(void)
-{
-	at572d940hf_init_interrupts(NULL);
-}
-
-
-/*
- * USB Host Port
- */
-static struct at91_usbh_data __initdata eb_usbh_data = {
-	.ports		= 2,
-};
-
-
-/*
- * USB Device Port
- */
-static struct at91_udc_data __initdata eb_udc_data = {
-	.vbus_pin	= 0,		/* no VBUS detection,UDC always on */
-	.pullup_pin	= 0,		/* pull-up driven by UDC */
-};
-
-
-/*
- * MCI (SD/MMC)
- */
-static struct at91_mmc_data __initdata eb_mmc_data = {
-	.wire4		= 1,
-/*	.det_pin	= ... not connected */
-/*	.wp_pin		= ... not connected */
-/*	.vcc_pin	= ... not connected */
-};
-
-
-/*
- * MACB Ethernet device
- */
-static struct at91_eth_data __initdata eb_eth_data = {
-	.phy_irq_pin	= AT91_PIN_PB25,
-	.is_rmii	= 1,
-};
-
-/*
- * NOR flash
- */
-
-static struct mtd_partition eb_nor_partitions[] = {
-	{
-		.name		= "Raw Environment",
-		.offset		= 0,
-		.size		= SZ_4M,
-		.mask_flags	= 0,
-	},
-	{
-		.name		= "OS FS",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 3 * SZ_1M,
-		.mask_flags	= 0,
-	},
-	{
-		.name		= "APP FS",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0,
-	},
-};
-
-static void nor_flash_set_vpp(struct map_info* mi, int i) {
-};
-
-static struct physmap_flash_data nor_flash_data = {
-	.width		= 4,
-	.parts		= eb_nor_partitions,
-	.nr_parts	= ARRAY_SIZE(eb_nor_partitions),
-	.set_vpp	= nor_flash_set_vpp,
-};
-
-static struct resource nor_flash_resources[] = {
-	{
-		.start	= AT91_CHIPSELECT_0,
-		.end	= AT91_CHIPSELECT_0 + SZ_16M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device nor_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-				.platform_data = &nor_flash_data,
-			},
-	.resource	= nor_flash_resources,
-	.num_resources	= ARRAY_SIZE(nor_flash_resources),
-};
-
-static struct sam9_smc_config __initdata eb_nor_smc_config = {
-	.ncs_read_setup		= 1,
-	.nrd_setup		= 1,
-	.ncs_write_setup	= 1,
-	.nwe_setup		= 1,
-
-	.ncs_read_pulse		= 7,
-	.nrd_pulse		= 7,
-	.ncs_write_pulse	= 7,
-	.nwe_pulse		= 7,
-
-	.read_cycle		= 9,
-	.write_cycle		= 9,
-
-	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | AT91_SMC_DBW_32,
-	.tdf_cycles		= 1,
-};
-
-static void __init eb_add_device_nor(void)
-{
-	/* configure chip-select 0 (NOR) */
-	sam9_smc_configure(0, &eb_nor_smc_config);
-	platform_device_register(&nor_flash);
-}
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata eb_nand_partition[] = {
-	{
-		.name	= "Partition 1",
-		.offset	= 0,
-		.size	= SZ_16M,
-	},
-	{
-		.name	= "Partition 2",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size	= MTDPART_SIZ_FULL,
-	}
-};
-
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
-	*num_partitions = ARRAY_SIZE(eb_nand_partition);
-	return eb_nand_partition;
-}
-
-static struct atmel_nand_data __initdata eb_nand_data = {
-	.ale		= 22,
-	.cle		= 21,
-/*	.det_pin	= ... not connected */
-/*	.rdy_pin	= AT91_PIN_PC16, */
-	.enable_pin	= AT91_PIN_PA15,
-	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
-	.bus_width_16	= 1,
-#else
-	.bus_width_16	= 0,
-#endif
-};
-
-static struct sam9_smc_config __initdata eb_nand_smc_config = {
-	.ncs_read_setup		= 0,
-	.nrd_setup		= 0,
-	.ncs_write_setup	= 1,
-	.nwe_setup		= 1,
-
-	.ncs_read_pulse		= 3,
-	.nrd_pulse		= 3,
-	.ncs_write_pulse	= 3,
-	.nwe_pulse		= 3,
-
-	.read_cycle		= 5,
-	.write_cycle		= 5,
-
-	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
-	.tdf_cycles		= 12,
-};
-
-static void __init eb_add_device_nand(void)
-{
-	/* setup bus-width (8 or 16) */
-	if (eb_nand_data.bus_width_16)
-		eb_nand_smc_config.mode |= AT91_SMC_DBW_16;
-	else
-		eb_nand_smc_config.mode |= AT91_SMC_DBW_8;
-
-	/* configure chip-select 3 (NAND) */
-	sam9_smc_configure(3, &eb_nand_smc_config);
-
-	at91_add_device_nand(&eb_nand_data);
-}
-
-
-/*
- * SPI devices
- */
-static struct resource rtc_resources[] = {
-	[0] = {
-		.start	= AT572D940HF_ID_IRQ1,
-		.end	= AT572D940HF_ID_IRQ1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct ds1305_platform_data ds1306_data = {
-	.is_ds1306	= true,
-	.en_1hz		= false,
-};
-
-static struct spi_board_info eb_spi_devices[] = {
-	{	/* RTC Dallas DS1306 */
-		.modalias	= "rtc-ds1305",
-		.chip_select	= 3,
-		.mode		= SPI_CS_HIGH | SPI_CPOL | SPI_CPHA,
-		.max_speed_hz	= 500000,
-		.bus_num	= 0,
-		.irq		= AT572D940HF_ID_IRQ1,
-		.platform_data	= (void *) &ds1306_data,
-	},
-#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
-	{	/* Dataflash card */
-		.modalias	= "mtd_dataflash",
-		.chip_select	= 0,
-		.max_speed_hz	= 15 * 1000 * 1000,
-		.bus_num	= 0,
-	},
-#endif
-};
-
-static void __init eb_board_init(void)
-{
-	/* Serial */
-	at91_add_device_serial();
-	/* USB Host */
-	at91_add_device_usbh(&eb_usbh_data);
-	/* USB Device */
-	at91_add_device_udc(&eb_udc_data);
-	/* I2C */
-	at91_add_device_i2c(NULL, 0);
-	/* NOR */
-	eb_add_device_nor();
-	/* NAND */
-	eb_add_device_nand();
-	/* SPI */
-	at91_add_device_spi(eb_spi_devices, ARRAY_SIZE(eb_spi_devices));
-	/* MMC */
-	at91_add_device_mmc(0, &eb_mmc_data);
-	/* Ethernet */
-	at91_add_device_eth(&eb_eth_data);
-	/* mAgic */
-	at91_add_device_mAgic();
-}
-
-MACHINE_START(AT572D940HFEB, "Atmel AT91D940HF-EB")
-	/* Maintainer: Atmel <costa.antonior@gmail.com> */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
-	.timer		= &at91sam926x_timer,
-	.map_io		= eb_map_io,
-	.init_irq	= eb_init_irq,
-	.init_machine	= eb_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c
index b54e3e6..148fccb 100644
--- a/arch/arm/mach-at91/board-cam60.c
+++ b/arch/arm/mach-at91/board-cam60.c
@@ -45,7 +45,7 @@
 #include "generic.h"
 
 
-static void __init cam60_map_io(void)
+static void __init cam60_init_early(void)
 {
 	/* Initialize processor: 10 MHz crystal */
 	at91sam9260_initialize(10000000);
@@ -198,9 +198,9 @@ static void __init cam60_board_init(void)
 
 MACHINE_START(CAM60, "KwikByte CAM60")
 	/* Maintainer: KwikByte */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
-	.map_io		= cam60_map_io,
+	.map_io		= at91sam9260_map_io,
+	.init_early	= cam60_init_early,
 	.init_irq	= cam60_init_irq,
 	.init_machine	= cam60_board_init,
 MACHINE_END
diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
index e727444..1904fdf 100644
--- a/arch/arm/mach-at91/board-cap9adk.c
+++ b/arch/arm/mach-at91/board-cap9adk.c
@@ -44,12 +44,13 @@
 #include <mach/gpio.h>
 #include <mach/at91cap9_matrix.h>
 #include <mach/at91sam9_smc.h>
+#include <mach/system_rev.h>
 
 #include "sam9_smc.h"
 #include "generic.h"
 
 
-static void __init cap9adk_map_io(void)
+static void __init cap9adk_init_early(void)
 {
 	/* Initialize processor: 12 MHz crystal */
 	at91cap9_initialize(12000000);
@@ -187,11 +188,6 @@ static struct atmel_nand_data __initdata cap9adk_nand_data = {
 //	.rdy_pin	= ... not connected
 	.enable_pin	= AT91_PIN_PD15,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
-	.bus_width_16	= 1,
-#else
-	.bus_width_16	= 0,
-#endif
 };
 
 static struct sam9_smc_config __initdata cap9adk_nand_smc_config = {
@@ -219,6 +215,7 @@ static void __init cap9adk_add_device_nand(void)
 	csa = at91_sys_read(AT91_MATRIX_EBICSA);
 	at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
 
+	cap9adk_nand_data.bus_width_16 = !board_have_nand_8bit();
 	/* setup bus-width (8 or 16) */
 	if (cap9adk_nand_data.bus_width_16)
 		cap9adk_nand_smc_config.mode |= AT91_SMC_DBW_16;
@@ -399,9 +396,9 @@ static void __init cap9adk_board_init(void)
 
 MACHINE_START(AT91CAP9ADK, "Atmel AT91CAP9A-DK")
 	/* Maintainer: Stelian Pop <stelian.pop@leadtechdesign.com> */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
-	.map_io		= cap9adk_map_io,
+	.map_io		= at91cap9_map_io,
+	.init_early	= cap9adk_init_early,
 	.init_irq	= cap9adk_init_irq,
 	.init_machine	= cap9adk_board_init,
 MACHINE_END
diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
index 295e1e7..f36b186 100644
--- a/arch/arm/mach-at91/board-carmeva.c
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -40,10 +40,10 @@
 #include "generic.h"
 
 
-static void __init carmeva_map_io(void)
+static void __init carmeva_init_early(void)
 {
 	/* Initialize processor: 20.000 MHz crystal */
-	at91rm9200_initialize(20000000, AT91RM9200_BGA);
+	at91rm9200_initialize(20000000);
 
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
@@ -162,9 +162,9 @@ static void __init carmeva_board_init(void)
 
 MACHINE_START(CARMEVA, "Carmeva")
 	/* Maintainer: Conitec Datasystems */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91rm9200_timer,
-	.map_io		= carmeva_map_io,
+	.map_io		= at91rm9200_map_io,
+	.init_early	= carmeva_init_early,
 	.init_irq	= carmeva_init_irq,
 	.init_machine	= carmeva_board_init,
 MACHINE_END
diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c
index 3838594..9805110 100644
--- a/arch/arm/mach-at91/board-cpu9krea.c
+++ b/arch/arm/mach-at91/board-cpu9krea.c
@@ -47,7 +47,7 @@
 #include "sam9_smc.h"
 #include "generic.h"
 
-static void __init cpu9krea_map_io(void)
+static void __init cpu9krea_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91sam9260_initialize(18432000);
@@ -375,9 +375,9 @@ MACHINE_START(CPUAT9260, "Eukrea CPU9260")
 MACHINE_START(CPUAT9G20, "Eukrea CPU9G20")
 #endif
 	/* Maintainer: Eric Benard - EUKREA Electromatique */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
-	.map_io		= cpu9krea_map_io,
+	.map_io		= at91sam9260_map_io,
+	.init_early	= cpu9krea_init_early,
 	.init_irq	= cpu9krea_init_irq,
 	.init_machine	= cpu9krea_board_init,
 MACHINE_END
diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c
index 2f4dd8c..6daabe3 100644
--- a/arch/arm/mach-at91/board-cpuat91.c
+++ b/arch/arm/mach-at91/board-cpuat91.c
@@ -38,6 +38,7 @@
 #include <mach/board.h>
 #include <mach/gpio.h>
 #include <mach/at91rm9200_mc.h>
+#include <mach/cpu.h>
 
 #include "generic.h"
 
@@ -50,10 +51,13 @@ static struct gpio_led cpuat91_leds[] = {
 	},
 };
 
-static void __init cpuat91_map_io(void)
+static void __init cpuat91_init_early(void)
 {
+	/* Set cpu type: PQFP */
+	at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
+
 	/* Initialize processor: 18.432 MHz crystal */
-	at91rm9200_initialize(18432000, AT91RM9200_PQFP);
+	at91rm9200_initialize(18432000);
 
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
@@ -175,9 +179,9 @@ static void __init cpuat91_board_init(void)
 
 MACHINE_START(CPUAT91, "Eukrea")
 	/* Maintainer: Eric Benard - EUKREA Electromatique */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91rm9200_timer,
-	.map_io		= cpuat91_map_io,
+	.map_io		= at91rm9200_map_io,
+	.init_early	= cpuat91_init_early,
 	.init_irq	= cpuat91_init_irq,
 	.init_machine	= cpuat91_board_init,
 MACHINE_END
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index 464839d..d98bcec 100644
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -43,10 +43,10 @@
 #include "generic.h"
 
 
-static void __init csb337_map_io(void)
+static void __init csb337_init_early(void)
 {
 	/* Initialize processor: 3.6864 MHz crystal */
-	at91rm9200_initialize(3686400, AT91RM9200_BGA);
+	at91rm9200_initialize(3686400);
 
 	/* Setup the LEDs */
 	at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
@@ -257,9 +257,9 @@ static void __init csb337_board_init(void)
 
 MACHINE_START(CSB337, "Cogent CSB337")
 	/* Maintainer: Bill Gatliff */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91rm9200_timer,
-	.map_io		= csb337_map_io,
+	.map_io		= at91rm9200_map_io,
+	.init_early	= csb337_init_early,
 	.init_irq	= csb337_init_irq,
 	.init_machine	= csb337_board_init,
 MACHINE_END
diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c
index 431688c..019aab4 100644
--- a/arch/arm/mach-at91/board-csb637.c
+++ b/arch/arm/mach-at91/board-csb637.c
@@ -40,10 +40,10 @@
 #include "generic.h"
 
 
-static void __init csb637_map_io(void)
+static void __init csb637_init_early(void)
 {
 	/* Initialize processor: 3.6864 MHz crystal */
-	at91rm9200_initialize(3686400, AT91RM9200_BGA);
+	at91rm9200_initialize(3686400);
 
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
@@ -138,9 +138,9 @@ static void __init csb637_board_init(void)
 
 MACHINE_START(CSB637, "Cogent CSB637")
 	/* Maintainer: Bill Gatliff */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91rm9200_timer,
-	.map_io		= csb637_map_io,
+	.map_io		= at91rm9200_map_io,
+	.init_early	= csb637_init_early,
 	.init_irq	= csb637_init_irq,
 	.init_machine	= csb637_board_init,
 MACHINE_END
diff --git a/arch/arm/mach-at91/board-eb01.c b/arch/arm/mach-at91/board-eb01.c
index d8df59a..d2023f2 100644
--- a/arch/arm/mach-at91/board-eb01.c
+++ b/arch/arm/mach-at91/board-eb01.c
@@ -35,7 +35,7 @@ static void __init at91eb01_init_irq(void)
 	at91x40_init_interrupts(NULL);
 }
 
-static void __init at91eb01_map_io(void)
+static void __init at91eb01_init_early(void)
 {
 	at91x40_initialize(40000000);
 }
@@ -43,7 +43,7 @@ static void __init at91eb01_map_io(void)
 MACHINE_START(AT91EB01, "Atmel AT91 EB01")
 	/* Maintainer: Greg Ungerer <gerg@snapgear.com> */
 	.timer		= &at91x40_timer,
+	.init_early	= at91eb01_init_early,
 	.init_irq	= at91eb01_init_irq,
-	.map_io		= at91eb01_map_io,
 MACHINE_END
 
diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c
index 6cf6566..e948453 100644
--- a/arch/arm/mach-at91/board-eb9200.c
+++ b/arch/arm/mach-at91/board-eb9200.c
@@ -40,10 +40,10 @@
 #include "generic.h"
 
 
-static void __init eb9200_map_io(void)
+static void __init eb9200_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
-	at91rm9200_initialize(18432000, AT91RM9200_BGA);
+	at91rm9200_initialize(18432000);
 
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
@@ -120,9 +120,9 @@ static void __init eb9200_board_init(void)
 }
 
 MACHINE_START(ATEB9200, "Embest ATEB9200")
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91rm9200_timer,
-	.map_io		= eb9200_map_io,
+	.map_io		= at91rm9200_map_io,
+	.init_early	= eb9200_init_early,
 	.init_irq	= eb9200_init_irq,
 	.init_machine	= eb9200_board_init,
 MACHINE_END
diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
index de2fd04..a6f57fa 100644
--- a/arch/arm/mach-at91/board-ecbat91.c
+++ b/arch/arm/mach-at91/board-ecbat91.c
@@ -38,14 +38,18 @@
 
 #include <mach/board.h>
 #include <mach/gpio.h>
+#include <mach/cpu.h>
 
 #include "generic.h"
 
 
-static void __init ecb_at91map_io(void)
+static void __init ecb_at91init_early(void)
 {
+	/* Set cpu type: PQFP */
+	at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
+
 	/* Initialize processor: 18.432 MHz crystal */
-	at91rm9200_initialize(18432000, AT91RM9200_PQFP);
+	at91rm9200_initialize(18432000);
 
 	/* Setup the LEDs */
 	at91_init_leds(AT91_PIN_PC7, AT91_PIN_PC7);
@@ -168,9 +172,9 @@ static void __init ecb_at91board_init(void)
 
 MACHINE_START(ECBAT91, "emQbit's ECB_AT91")
 	/* Maintainer: emQbit.com */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91rm9200_timer,
-	.map_io		= ecb_at91map_io,
+	.map_io		= at91rm9200_map_io,
+	.init_early	= ecb_at91init_early,
 	.init_irq	= ecb_at91init_irq,
 	.init_machine	= ecb_at91board_init,
 MACHINE_END
diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c
index a158a0c..bfc0062 100644
--- a/arch/arm/mach-at91/board-eco920.c
+++ b/arch/arm/mach-at91/board-eco920.c
@@ -26,11 +26,16 @@
 
 #include <mach/board.h>
 #include <mach/at91rm9200_mc.h>
+#include <mach/cpu.h>
+
 #include "generic.h"
 
-static void __init eco920_map_io(void)
+static void __init eco920_init_early(void)
 {
-	at91rm9200_initialize(18432000, AT91RM9200_PQFP);
+	/* Set cpu type: PQFP */
+	at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
+
+	at91rm9200_initialize(18432000);
 
 	/* Setup the LEDs */
 	at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
@@ -86,21 +91,6 @@ static struct platform_device eco920_flash = {
 	.num_resources  = 1,
 };
 
-static struct resource at91_beeper_resources[] = {
-	[0] = {
-		.start          = AT91RM9200_BASE_TC3,
-		.end            = AT91RM9200_BASE_TC3 + 0x39,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device at91_beeper = {
-	.name           = "at91_beeper",
-	.id             = 0,
-	.resource       = at91_beeper_resources,
-	.num_resources  = ARRAY_SIZE(at91_beeper_resources),
-};
-
 static struct spi_board_info eco920_spi_devices[] = {
 	{	/* CAN controller */
 		.modalias	= "tlv5638",
@@ -139,18 +129,14 @@ static void __init eco920_board_init(void)
 		AT91_SMC_TDF_(1)	/* float time */
 	);
 
-	at91_clock_associate("tc3_clk", &at91_beeper.dev, "at91_beeper");
-	at91_set_B_periph(AT91_PIN_PB6, 0);
-	platform_device_register(&at91_beeper);
-
 	at91_add_device_spi(eco920_spi_devices, ARRAY_SIZE(eco920_spi_devices));
 }
 
 MACHINE_START(ECO920, "eco920")
 	/* Maintainer: Sascha Hauer */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91rm9200_timer,
-	.map_io		= eco920_map_io,
+	.map_io		= at91rm9200_map_io,
+	.init_early	= eco920_init_early,
 	.init_irq	= eco920_init_irq,
 	.init_machine	= eco920_board_init,
 MACHINE_END
diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c
index c8a62dc..466c063 100644
--- a/arch/arm/mach-at91/board-flexibity.c
+++ b/arch/arm/mach-at91/board-flexibity.c
@@ -37,7 +37,7 @@
 
 #include "generic.h"
 
-static void __init flexibity_map_io(void)
+static void __init flexibity_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91sam9260_initialize(18432000);
@@ -154,9 +154,9 @@ static void __init flexibity_board_init(void)
 
 MACHINE_START(FLEXIBITY, "Flexibity Connect")
 	/* Maintainer: Maxim Osipov */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
-	.map_io		= flexibity_map_io,
+	.map_io		= at91sam9260_map_io,
+	.init_early	= flexibity_init_early,
 	.init_irq	= flexibity_init_irq,
 	.init_machine	= flexibity_board_init,
 MACHINE_END
diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c
index dfc7dfe..e2d1dc9 100644
--- a/arch/arm/mach-at91/board-foxg20.c
+++ b/arch/arm/mach-at91/board-foxg20.c
@@ -57,7 +57,7 @@
  */
 
 
-static void __init foxg20_map_io(void)
+static void __init foxg20_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91sam9260_initialize(18432000);
@@ -266,9 +266,9 @@ static void __init foxg20_board_init(void)
 
 MACHINE_START(ACMENETUSFOXG20, "Acme Systems srl FOX Board G20")
 	/* Maintainer: Sergio Tanzilli */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
-	.map_io		= foxg20_map_io,
+	.map_io		= at91sam9260_map_io,
+	.init_early	= foxg20_init_early,
 	.init_irq	= foxg20_init_irq,
 	.init_machine	= foxg20_board_init,
 MACHINE_END
diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c
index bc28136..1d4f36b 100644
--- a/arch/arm/mach-at91/board-gsia18s.c
+++ b/arch/arm/mach-at91/board-gsia18s.c
@@ -38,9 +38,9 @@
 #include "sam9_smc.h"
 #include "generic.h"
 
-static void __init gsia18s_map_io(void)
+static void __init gsia18s_init_early(void)
 {
-	stamp9g20_map_io();
+	stamp9g20_init_early();
 
 	/*
 	 * USART0 on ttyS1 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI).
@@ -576,9 +576,9 @@ static void __init gsia18s_board_init(void)
 }
 
 MACHINE_START(GSIA18S, "GS_IA18_S")
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
-	.map_io		= gsia18s_map_io,
+	.map_io		= at91sam9260_map_io,
+	.init_early	= gsia18s_init_early,
 	.init_irq	= init_irq,
 	.init_machine	= gsia18s_board_init,
 MACHINE_END
diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
index d2e1f4e..9b003ff 100644
--- a/arch/arm/mach-at91/board-kafa.c
+++ b/arch/arm/mach-at91/board-kafa.c
@@ -35,14 +35,18 @@
 
 #include <mach/board.h>
 #include <mach/gpio.h>
+#include <mach/cpu.h>
 
 #include "generic.h"
 
 
-static void __init kafa_map_io(void)
+static void __init kafa_init_early(void)
 {
+	/* Set cpu type: PQFP */
+	at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
+
 	/* Initialize processor: 18.432 MHz crystal */
-	at91rm9200_initialize(18432000, AT91RM9200_PQFP);
+	at91rm9200_initialize(18432000);
 
 	/* Set up the LEDs */
 	at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4);
@@ -94,9 +98,9 @@ static void __init kafa_board_init(void)
 
 MACHINE_START(KAFA, "Sperry-Sun KAFA")
 	/* Maintainer: Sergei Sharonov */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91rm9200_timer,
-	.map_io		= kafa_map_io,
+	.map_io		= at91rm9200_map_io,
+	.init_early	= kafa_init_early,
 	.init_irq	= kafa_init_irq,
 	.init_machine	= kafa_board_init,
 MACHINE_END
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index a13d206..a813a74 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -36,16 +36,19 @@
 
 #include <mach/board.h>
 #include <mach/gpio.h>
-
+#include <mach/cpu.h>
 #include <mach/at91rm9200_mc.h>
 
 #include "generic.h"
 
 
-static void __init kb9202_map_io(void)
+static void __init kb9202_init_early(void)
 {
+	/* Set cpu type: PQFP */
+	at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
+
 	/* Initialize processor: 10 MHz crystal */
-	at91rm9200_initialize(10000000, AT91RM9200_PQFP);
+	at91rm9200_initialize(10000000);
 
 	/* Set up the LEDs */
 	at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18);
@@ -136,9 +139,9 @@ static void __init kb9202_board_init(void)
 
 MACHINE_START(KB9200, "KB920x")
 	/* Maintainer: KwikByte, Inc. */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91rm9200_timer,
-	.map_io		= kb9202_map_io,
+	.map_io		= at91rm9200_map_io,
+	.init_early	= kb9202_init_early,
 	.init_irq	= kb9202_init_irq,
 	.init_machine	= kb9202_board_init,
 MACHINE_END
diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c
index fe5f1d4..961e805 100644
--- a/arch/arm/mach-at91/board-neocore926.c
+++ b/arch/arm/mach-at91/board-neocore926.c
@@ -51,7 +51,7 @@
 #include "generic.h"
 
 
-static void __init neocore926_map_io(void)
+static void __init neocore926_init_early(void)
 {
 	/* Initialize processor: 20 MHz crystal */
 	at91sam9263_initialize(20000000);
@@ -387,9 +387,9 @@ static void __init neocore926_board_init(void)
 
 MACHINE_START(NEOCORE926, "ADENEO NEOCORE 926")
 	/* Maintainer: ADENEO */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
-	.map_io		= neocore926_map_io,
+	.map_io		= at91sam9263_map_io,
+	.init_early	= neocore926_init_early,
 	.init_irq	= neocore926_init_irq,
 	.init_machine	= neocore926_board_init,
 MACHINE_END
diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c
index feb6578..21a21af 100644
--- a/arch/arm/mach-at91/board-pcontrol-g20.c
+++ b/arch/arm/mach-at91/board-pcontrol-g20.c
@@ -37,9 +37,9 @@
 #include "generic.h"
 
 
-static void __init pcontrol_g20_map_io(void)
+static void __init pcontrol_g20_init_early(void)
 {
-	stamp9g20_map_io();
+	stamp9g20_init_early();
 
 	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS) piggyback  A2 */
 	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS
@@ -222,9 +222,9 @@ static void __init pcontrol_g20_board_init(void)
 
 MACHINE_START(PCONTROL_G20, "PControl G20")
 	/* Maintainer: pgsellmann@portner-elektronik.at */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
-	.map_io		= pcontrol_g20_map_io,
+	.map_io		= at91sam9260_map_io,
+	.init_early	= pcontrol_g20_init_early,
 	.init_irq	= init_irq,
 	.init_machine	= pcontrol_g20_board_init,
 MACHINE_END
diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c
index 55dad3a..756cc2a 100644
--- a/arch/arm/mach-at91/board-picotux200.c
+++ b/arch/arm/mach-at91/board-picotux200.c
@@ -43,10 +43,10 @@
 #include "generic.h"
 
 
-static void __init picotux200_map_io(void)
+static void __init picotux200_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
-	at91rm9200_initialize(18432000, AT91RM9200_BGA);
+	at91rm9200_initialize(18432000);
 
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
@@ -123,9 +123,9 @@ static void __init picotux200_board_init(void)
 
 MACHINE_START(PICOTUX2XX, "picotux 200")
 	/* Maintainer: Kleinhenz Elektronik GmbH */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91rm9200_timer,
-	.map_io		= picotux200_map_io,
+	.map_io		= at91rm9200_map_io,
+	.init_early	= picotux200_init_early,
 	.init_irq	= picotux200_init_irq,
 	.init_machine	= picotux200_board_init,
 MACHINE_END
diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
index 69d15a8..d1a6001 100644
--- a/arch/arm/mach-at91/board-qil-a9260.c
+++ b/arch/arm/mach-at91/board-qil-a9260.c
@@ -48,7 +48,7 @@
 #include "generic.h"
 
 
-static void __init ek_map_io(void)
+static void __init ek_init_early(void)
 {
 	/* Initialize processor: 12.000 MHz crystal */
 	at91sam9260_initialize(12000000);
@@ -268,9 +268,9 @@ static void __init ek_board_init(void)
 
 MACHINE_START(QIL_A9260, "CALAO QIL_A9260")
 	/* Maintainer: calao-systems */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
-	.map_io		= ek_map_io,
+	.map_io		= at91sam9260_map_io,
+	.init_early	= ek_init_early,
 	.init_irq	= ek_init_irq,
 	.init_machine	= ek_board_init,
 MACHINE_END
diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c
index 4c1047c..aef9627 100644
--- a/arch/arm/mach-at91/board-rm9200dk.c
+++ b/arch/arm/mach-at91/board-rm9200dk.c
@@ -45,10 +45,10 @@
 #include "generic.h"
 
 
-static void __init dk_map_io(void)
+static void __init dk_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
-	at91rm9200_initialize(18432000, AT91RM9200_BGA);
+	at91rm9200_initialize(18432000);
 
 	/* Setup the LEDs */
 	at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
@@ -227,9 +227,9 @@ static void __init dk_board_init(void)
 
 MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK")
 	/* Maintainer: SAN People/Atmel */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91rm9200_timer,
-	.map_io		= dk_map_io,
+	.map_io		= at91rm9200_map_io,
+	.init_early	= dk_init_early,
 	.init_irq	= dk_init_irq,
 	.init_machine	= dk_board_init,
 MACHINE_END
diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c
index 9df1be8..015a021 100644
--- a/arch/arm/mach-at91/board-rm9200ek.c
+++ b/arch/arm/mach-at91/board-rm9200ek.c
@@ -45,10 +45,10 @@
 #include "generic.h"
 
 
-static void __init ek_map_io(void)
+static void __init ek_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
-	at91rm9200_initialize(18432000, AT91RM9200_BGA);
+	at91rm9200_initialize(18432000);
 
 	/* Setup the LEDs */
 	at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
@@ -193,9 +193,9 @@ static void __init ek_board_init(void)
 
 MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK")
 	/* Maintainer: SAN People/Atmel */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91rm9200_timer,
-	.map_io		= ek_map_io,
+	.map_io		= at91rm9200_map_io,
+	.init_early	= ek_init_early,
 	.init_irq	= ek_init_irq,
 	.init_machine	= ek_board_init,
 MACHINE_END
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index 25a26be..aaf1bf0 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -44,7 +44,7 @@
 #include "generic.h"
 
 
-static void __init ek_map_io(void)
+static void __init ek_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91sam9260_initialize(18432000);
@@ -212,9 +212,9 @@ static void __init ek_board_init(void)
 
 MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260")
 	/* Maintainer: Olimex */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
-	.map_io		= ek_map_io,
+	.map_io		= at91sam9260_map_io,
+	.init_early	= ek_init_early,
 	.init_irq	= ek_init_irq,
 	.init_machine	= ek_board_init,
 MACHINE_END
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index de1816e..d600dc1 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -44,12 +44,13 @@
 #include <mach/gpio.h>
 #include <mach/at91sam9_smc.h>
 #include <mach/at91_shdwc.h>
+#include <mach/system_rev.h>
 
 #include "sam9_smc.h"
 #include "generic.h"
 
 
-static void __init ek_map_io(void)
+static void __init ek_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91sam9260_initialize(18432000);
@@ -191,11 +192,6 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 	.rdy_pin	= AT91_PIN_PC13,
 	.enable_pin	= AT91_PIN_PC14,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
-	.bus_width_16	= 1,
-#else
-	.bus_width_16	= 0,
-#endif
 };
 
 static struct sam9_smc_config __initdata ek_nand_smc_config = {
@@ -218,6 +214,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = {
 
 static void __init ek_add_device_nand(void)
 {
+	ek_nand_data.bus_width_16 = !board_have_nand_8bit();
 	/* setup bus-width (8 or 16) */
 	if (ek_nand_data.bus_width_16)
 		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
@@ -356,9 +353,9 @@ static void __init ek_board_init(void)
 
 MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
 	/* Maintainer: Atmel */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
-	.map_io		= ek_map_io,
+	.map_io		= at91sam9260_map_io,
+	.init_early	= ek_init_early,
 	.init_irq	= ek_init_irq,
 	.init_machine	= ek_board_init,
 MACHINE_END
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 14acc90..f897f84 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -48,12 +48,13 @@
 #include <mach/gpio.h>
 #include <mach/at91sam9_smc.h>
 #include <mach/at91_shdwc.h>
+#include <mach/system_rev.h>
 
 #include "sam9_smc.h"
 #include "generic.h"
 
 
-static void __init ek_map_io(void)
+static void __init ek_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91sam9261_initialize(18432000);
@@ -197,11 +198,6 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 	.rdy_pin	= AT91_PIN_PC15,
 	.enable_pin	= AT91_PIN_PC14,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
-	.bus_width_16	= 1,
-#else
-	.bus_width_16	= 0,
-#endif
 };
 
 static struct sam9_smc_config __initdata ek_nand_smc_config = {
@@ -224,6 +220,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = {
 
 static void __init ek_add_device_nand(void)
 {
+	ek_nand_data.bus_width_16 = !board_have_nand_8bit();
 	/* setup bus-width (8 or 16) */
 	if (ek_nand_data.bus_width_16)
 		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
@@ -623,9 +620,9 @@ MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK")
 MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK")
 #endif
 	/* Maintainer: Atmel */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
-	.map_io		= ek_map_io,
+	.map_io		= at91sam9261_map_io,
+	.init_early	= ek_init_early,
 	.init_irq	= ek_init_irq,
 	.init_machine	= ek_board_init,
 MACHINE_END
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index bfe490d..605b26f 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -47,12 +47,13 @@
 #include <mach/gpio.h>
 #include <mach/at91sam9_smc.h>
 #include <mach/at91_shdwc.h>
+#include <mach/system_rev.h>
 
 #include "sam9_smc.h"
 #include "generic.h"
 
 
-static void __init ek_map_io(void)
+static void __init ek_init_early(void)
 {
 	/* Initialize processor: 16.367 MHz crystal */
 	at91sam9263_initialize(16367660);
@@ -198,11 +199,6 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 	.rdy_pin	= AT91_PIN_PA22,
 	.enable_pin	= AT91_PIN_PD15,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
-	.bus_width_16	= 1,
-#else
-	.bus_width_16	= 0,
-#endif
 };
 
 static struct sam9_smc_config __initdata ek_nand_smc_config = {
@@ -225,6 +221,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = {
 
 static void __init ek_add_device_nand(void)
 {
+	ek_nand_data.bus_width_16 = !board_have_nand_8bit();
 	/* setup bus-width (8 or 16) */
 	if (ek_nand_data.bus_width_16)
 		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
@@ -454,9 +451,9 @@ static void __init ek_board_init(void)
 
 MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")
 	/* Maintainer: Atmel */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
-	.map_io		= ek_map_io,
+	.map_io		= at91sam9263_map_io,
+	.init_early	= ek_init_early,
 	.init_irq	= ek_init_irq,
 	.init_machine	= ek_board_init,
 MACHINE_END
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index ca8198b..7624cf0 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -43,6 +43,7 @@
 #include <mach/board.h>
 #include <mach/gpio.h>
 #include <mach/at91sam9_smc.h>
+#include <mach/system_rev.h>
 
 #include "sam9_smc.h"
 #include "generic.h"
@@ -60,7 +61,7 @@ static int inline ek_have_2mmc(void)
 }
 
 
-static void __init ek_map_io(void)
+static void __init ek_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91sam9260_initialize(18432000);
@@ -175,11 +176,6 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 	.rdy_pin	= AT91_PIN_PC13,
 	.enable_pin	= AT91_PIN_PC14,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
-	.bus_width_16	= 1,
-#else
-	.bus_width_16	= 0,
-#endif
 };
 
 static struct sam9_smc_config __initdata ek_nand_smc_config = {
@@ -202,6 +198,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = {
 
 static void __init ek_add_device_nand(void)
 {
+	ek_nand_data.bus_width_16 = !board_have_nand_8bit();
 	/* setup bus-width (8 or 16) */
 	if (ek_nand_data.bus_width_16)
 		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
@@ -406,18 +403,18 @@ static void __init ek_board_init(void)
 
 MACHINE_START(AT91SAM9G20EK, "Atmel AT91SAM9G20-EK")
 	/* Maintainer: Atmel */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
-	.map_io		= ek_map_io,
+	.map_io		= at91sam9260_map_io,
+	.init_early	= ek_init_early,
 	.init_irq	= ek_init_irq,
 	.init_machine	= ek_board_init,
 MACHINE_END
 
 MACHINE_START(AT91SAM9G20EK_2MMC, "Atmel AT91SAM9G20-EK 2 MMC Slot Mod")
 	/* Maintainer: Atmel */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
-	.map_io		= ek_map_io,
+	.map_io		= at91sam9260_map_io,
+	.init_early	= ek_init_early,
 	.init_irq	= ek_init_irq,
 	.init_machine	= ek_board_init,
 MACHINE_END
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index 6c999db..063c95d 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -41,12 +41,13 @@
 #include <mach/gpio.h>
 #include <mach/at91sam9_smc.h>
 #include <mach/at91_shdwc.h>
+#include <mach/system_rev.h>
 
 #include "sam9_smc.h"
 #include "generic.h"
 
 
-static void __init ek_map_io(void)
+static void __init ek_init_early(void)
 {
 	/* Initialize processor: 12.000 MHz crystal */
 	at91sam9g45_initialize(12000000);
@@ -155,11 +156,6 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 	.rdy_pin	= AT91_PIN_PC8,
 	.enable_pin	= AT91_PIN_PC14,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
-	.bus_width_16	= 1,
-#else
-	.bus_width_16	= 0,
-#endif
 };
 
 static struct sam9_smc_config __initdata ek_nand_smc_config = {
@@ -182,6 +178,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = {
 
 static void __init ek_add_device_nand(void)
 {
+	ek_nand_data.bus_width_16 = !board_have_nand_8bit();
 	/* setup bus-width (8 or 16) */
 	if (ek_nand_data.bus_width_16)
 		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
@@ -424,9 +421,9 @@ static void __init ek_board_init(void)
 
 MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK")
 	/* Maintainer: Atmel */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
-	.map_io		= ek_map_io,
+	.map_io		= at91sam9g45_map_io,
+	.init_early	= ek_init_early,
 	.init_irq	= ek_init_irq,
 	.init_machine	= ek_board_init,
 MACHINE_END
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index 3bf3408..effb399 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -38,7 +38,7 @@
 #include "generic.h"
 
 
-static void __init ek_map_io(void)
+static void __init ek_init_early(void)
 {
 	/* Initialize processor: 12.000 MHz crystal */
 	at91sam9rl_initialize(12000000);
@@ -329,9 +329,9 @@ static void __init ek_board_init(void)
 
 MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK")
 	/* Maintainer: Atmel */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
-	.map_io		= ek_map_io,
+	.map_io		= at91sam9rl_map_io,
+	.init_early	= ek_init_early,
 	.init_irq	= ek_init_irq,
 	.init_machine	= ek_board_init,
 MACHINE_END
diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c
index 17f7d9b..3eb0a11 100644
--- a/arch/arm/mach-at91/board-snapper9260.c
+++ b/arch/arm/mach-at91/board-snapper9260.c
@@ -40,7 +40,7 @@
 
 #define SNAPPER9260_IO_EXP_GPIO(x)	(NR_BUILTIN_GPIO + (x))
 
-static void __init snapper9260_map_io(void)
+static void __init snapper9260_init_early(void)
 {
 	at91sam9260_initialize(18432000);
 
@@ -178,9 +178,9 @@ static void __init snapper9260_board_init(void)
 }
 
 MACHINE_START(SNAPPER_9260, "Bluewater Systems Snapper 9260/9G20 module")
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
-	.map_io		= snapper9260_map_io,
+	.map_io		= at91sam9260_map_io,
+	.init_early	= snapper9260_init_early,
 	.init_irq	= snapper9260_init_irq,
 	.init_machine	= snapper9260_board_init,
 MACHINE_END
diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c
index f8902b11..5e5c856 100644
--- a/arch/arm/mach-at91/board-stamp9g20.c
+++ b/arch/arm/mach-at91/board-stamp9g20.c
@@ -32,7 +32,7 @@
 #include "generic.h"
 
 
-void __init stamp9g20_map_io(void)
+void __init stamp9g20_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91sam9260_initialize(18432000);
@@ -44,9 +44,9 @@ void __init stamp9g20_map_io(void)
 	at91_set_serial_console(0);
 }
 
-static void __init stamp9g20evb_map_io(void)
+static void __init stamp9g20evb_init_early(void)
 {
-	stamp9g20_map_io();
+	stamp9g20_init_early();
 
 	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
 	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
@@ -54,9 +54,9 @@ static void __init stamp9g20evb_map_io(void)
 						| ATMEL_UART_DCD | ATMEL_UART_RI);
 }
 
-static void __init portuxg20_map_io(void)
+static void __init portuxg20_init_early(void)
 {
-	stamp9g20_map_io();
+	stamp9g20_init_early();
 
 	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
 	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
@@ -298,18 +298,18 @@ static void __init stamp9g20evb_board_init(void)
 
 MACHINE_START(PORTUXG20, "taskit PortuxG20")
 	/* Maintainer: taskit GmbH */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
-	.map_io		= portuxg20_map_io,
+	.map_io		= at91sam9260_map_io,
+	.init_early	= portuxg20_init_early,
 	.init_irq	= init_irq,
 	.init_machine	= portuxg20_board_init,
 MACHINE_END
 
 MACHINE_START(STAMP9G20, "taskit Stamp9G20")
 	/* Maintainer: taskit GmbH */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
-	.map_io		= stamp9g20evb_map_io,
+	.map_io		= at91sam9260_map_io,
+	.init_early	= stamp9g20evb_init_early,
 	.init_irq	= init_irq,
 	.init_machine	= stamp9g20evb_board_init,
 MACHINE_END
diff --git a/arch/arm/mach-at91/board-usb-a9260.c b/arch/arm/mach-at91/board-usb-a9260.c
index 07784ba..0e784e6 100644
--- a/arch/arm/mach-at91/board-usb-a9260.c
+++ b/arch/arm/mach-at91/board-usb-a9260.c
@@ -48,7 +48,7 @@
 #include "generic.h"
 
 
-static void __init ek_map_io(void)
+static void __init ek_init_early(void)
 {
 	/* Initialize processor: 12.000 MHz crystal */
 	at91sam9260_initialize(12000000);
@@ -228,9 +228,9 @@ static void __init ek_board_init(void)
 
 MACHINE_START(USB_A9260, "CALAO USB_A9260")
 	/* Maintainer: calao-systems */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
-	.map_io		= ek_map_io,
+	.map_io		= at91sam9260_map_io,
+	.init_early	= ek_init_early,
 	.init_irq	= ek_init_irq,
 	.init_machine	= ek_board_init,
 MACHINE_END
diff --git a/arch/arm/mach-at91/board-usb-a9263.c b/arch/arm/mach-at91/board-usb-a9263.c
index b6145089..cf626dd 100644
--- a/arch/arm/mach-at91/board-usb-a9263.c
+++ b/arch/arm/mach-at91/board-usb-a9263.c
@@ -47,7 +47,7 @@
 #include "generic.h"
 
 
-static void __init ek_map_io(void)
+static void __init ek_init_early(void)
 {
 	/* Initialize processor: 12.00 MHz crystal */
 	at91sam9263_initialize(12000000);
@@ -244,9 +244,9 @@ static void __init ek_board_init(void)
 
 MACHINE_START(USB_A9263, "CALAO USB_A9263")
 	/* Maintainer: calao-systems */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
-	.map_io		= ek_map_io,
+	.map_io		= at91sam9263_map_io,
+	.init_early	= ek_init_early,
 	.init_irq	= ek_init_irq,
 	.init_machine	= ek_board_init,
 MACHINE_END
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index e0f0080..c208cc3 100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -45,14 +45,18 @@
 #include <mach/board.h>
 #include <mach/gpio.h>
 #include <mach/at91rm9200_mc.h>
+#include <mach/cpu.h>
 
 #include "generic.h"
 
 
-static void __init yl9200_map_io(void)
+static void __init yl9200_init_early(void)
 {
+	/* Set cpu type: PQFP */
+	at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
+
 	/* Initialize processor: 18.432 MHz crystal */
-	at91rm9200_initialize(18432000, AT91RM9200_PQFP);
+	at91rm9200_initialize(18432000);
 
 	/* Setup the LEDs D2=PB17 (timer), D3=PB16 (cpu) */
 	at91_init_leds(AT91_PIN_PB16, AT91_PIN_PB17);
@@ -594,9 +598,9 @@ static void __init yl9200_board_init(void)
 
 MACHINE_START(YL9200, "uCdragon YL-9200")
 	/* Maintainer: S.Birtles */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91rm9200_timer,
-	.map_io		= yl9200_map_io,
+	.map_io		= at91rm9200_map_io,
+	.init_early	= yl9200_init_early,
 	.init_irq	= yl9200_init_irq,
 	.init_machine	= yl9200_board_init,
 MACHINE_END
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index 9113da6..61873f3 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -163,7 +163,7 @@ static struct clk udpck = {
 	.parent		= &pllb,
 	.mode		= pmc_sys_mode,
 };
-static struct clk utmi_clk = {
+struct clk utmi_clk = {
 	.name		= "utmi_clk",
 	.parent		= &main_clk,
 	.pmc_mask	= AT91_PMC_UPLLEN,	/* in CKGR_UCKR */
@@ -182,7 +182,7 @@ static struct clk uhpck = {
  * memory, interfaces to on-chip peripherals, the AIC, and sometimes more
  * (e.g baud rate generation).  It's sourced from one of the primary clocks.
  */
-static struct clk mck = {
+struct clk mck = {
 	.name		= "mck",
 	.pmc_mask	= AT91_PMC_MCKRDY,	/* in PMC_SR */
 };
@@ -215,43 +215,6 @@ static struct clk __init *at91_css_to_clk(unsigned long css)
 	return NULL;
 }
 
-/*
- * Associate a particular clock with a function (eg, "uart") and device.
- * The drivers can then request the same 'function' with several different
- * devices and not care about which clock name to use.
- */
-void __init at91_clock_associate(const char *id, struct device *dev, const char *func)
-{
-	struct clk *clk = clk_get(NULL, id);
-
-	if (!dev || !clk || !IS_ERR(clk_get(dev, func)))
-		return;
-
-	clk->function = func;
-	clk->dev = dev;
-}
-
-/* clocks cannot be de-registered no refcounting necessary */
-struct clk *clk_get(struct device *dev, const char *id)
-{
-	struct clk *clk;
-
-	list_for_each_entry(clk, &clocks, node) {
-		if (strcmp(id, clk->name) == 0)
-			return clk;
-		if (clk->function && (dev == clk->dev) && strcmp(id, clk->function) == 0)
-			return clk;
-	}
-
-	return ERR_PTR(-ENOENT);
-}
-EXPORT_SYMBOL(clk_get);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
-
 static void __clk_enable(struct clk *clk)
 {
 	if (clk->parent)
@@ -498,32 +461,38 @@ postcore_initcall(at91_clk_debugfs_init);
 /*------------------------------------------------------------------------*/
 
 /* Register a new clock */
+static void __init at91_clk_add(struct clk *clk)
+{
+	list_add_tail(&clk->node, &clocks);
+
+	clk->cl.con_id = clk->name;
+	clk->cl.clk = clk;
+	clkdev_add(&clk->cl);
+}
+
 int __init clk_register(struct clk *clk)
 {
 	if (clk_is_peripheral(clk)) {
 		if (!clk->parent)
 			clk->parent = &mck;
 		clk->mode = pmc_periph_mode;
-		list_add_tail(&clk->node, &clocks);
 	}
 	else if (clk_is_sys(clk)) {
 		clk->parent = &mck;
 		clk->mode = pmc_sys_mode;
-
-		list_add_tail(&clk->node, &clocks);
 	}
 #ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
 	else if (clk_is_programmable(clk)) {
 		clk->mode = pmc_sys_mode;
 		init_programmable_clock(clk);
-		list_add_tail(&clk->node, &clocks);
 	}
 #endif
 
+	at91_clk_add(clk);
+
 	return 0;
 }
 
-
 /*------------------------------------------------------------------------*/
 
 static u32 __init at91_pll_rate(struct clk *pll, u32 freq, u32 reg)
@@ -630,7 +599,7 @@ static void __init at91_pllb_usbfs_clock_init(unsigned long main_clock)
 		at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
 	} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() ||
 		   cpu_is_at91sam9263() || cpu_is_at91sam9g20() ||
-		   cpu_is_at91sam9g10() || cpu_is_at572d940hf()) {
+		   cpu_is_at91sam9g10()) {
 		uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
 		udpck.pmc_mask = AT91SAM926x_PMC_UDP;
 	} else if (cpu_is_at91cap9()) {
@@ -754,19 +723,19 @@ int __init at91_clock_init(unsigned long main_clock)
 
 	/* Register the PMC's standard clocks */
 	for (i = 0; i < ARRAY_SIZE(standard_pmc_clocks); i++)
-		list_add_tail(&standard_pmc_clocks[i]->node, &clocks);
+		at91_clk_add(standard_pmc_clocks[i]);
 
 	if (cpu_has_pllb())
-		list_add_tail(&pllb.node, &clocks);
+		at91_clk_add(&pllb);
 
 	if (cpu_has_uhp())
-		list_add_tail(&uhpck.node, &clocks);
+		at91_clk_add(&uhpck);
 
 	if (cpu_has_udpfs())
-		list_add_tail(&udpck.node, &clocks);
+		at91_clk_add(&udpck);
 
 	if (cpu_has_utmi())
-		list_add_tail(&utmi_clk.node, &clocks);
+		at91_clk_add(&utmi_clk);
 
 	/* MCK and CPU clock are "always on" */
 	clk_enable(&mck);
diff --git a/arch/arm/mach-at91/clock.h b/arch/arm/mach-at91/clock.h
index 6cf4b78..c2e63e4 100644
--- a/arch/arm/mach-at91/clock.h
+++ b/arch/arm/mach-at91/clock.h
@@ -6,6 +6,8 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/clkdev.h>
+
 #define CLK_TYPE_PRIMARY	0x1
 #define CLK_TYPE_PLL		0x2
 #define CLK_TYPE_PROGRAMMABLE	0x4
@@ -16,8 +18,7 @@
 struct clk {
 	struct list_head node;
 	const char	*name;		/* unique clock name */
-	const char	*function;	/* function of the clock */
-	struct device	*dev;		/* device associated with function */
+	struct clk_lookup cl;
 	unsigned long	rate_hz;
 	struct clk	*parent;
 	u32		pmc_mask;
@@ -29,3 +30,18 @@ struct clk {
 
 
 extern int __init clk_register(struct clk *clk);
+extern struct clk mck;
+extern struct clk utmi_clk;
+
+#define CLKDEV_CON_ID(_id, _clk)			\
+	{						\
+		.con_id = _id,				\
+		.clk = _clk,				\
+	}
+
+#define CLKDEV_CON_DEV_ID(_con_id, _dev_id, _clk)	\
+	{						\
+		.con_id = _con_id,			\
+		.dev_id = _dev_id,			\
+		.clk = _clk,				\
+	}
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index 0c66deb..8ff3418 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -8,8 +8,21 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/clkdev.h>
+
+ /* Map io */
+extern void __init at91rm9200_map_io(void);
+extern void __init at91sam9260_map_io(void);
+extern void __init at91sam9261_map_io(void);
+extern void __init at91sam9263_map_io(void);
+extern void __init at91sam9rl_map_io(void);
+extern void __init at91sam9g45_map_io(void);
+extern void __init at91x40_map_io(void);
+extern void __init at91cap9_map_io(void);
+
  /* Processors */
-extern void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks);
+extern void __init at91rm9200_set_type(int type);
+extern void __init at91rm9200_initialize(unsigned long main_clock);
 extern void __init at91sam9260_initialize(unsigned long main_clock);
 extern void __init at91sam9261_initialize(unsigned long main_clock);
 extern void __init at91sam9263_initialize(unsigned long main_clock);
@@ -17,7 +30,6 @@ extern void __init at91sam9rl_initialize(unsigned long main_clock);
 extern void __init at91sam9g45_initialize(unsigned long main_clock);
 extern void __init at91x40_initialize(unsigned long main_clock);
 extern void __init at91cap9_initialize(unsigned long main_clock);
-extern void __init at572d940hf_initialize(unsigned long main_clock);
 
  /* Interrupts */
 extern void __init at91rm9200_init_interrupts(unsigned int priority[]);
@@ -28,7 +40,6 @@ extern void __init at91sam9rl_init_interrupts(unsigned int priority[]);
 extern void __init at91sam9g45_init_interrupts(unsigned int priority[]);
 extern void __init at91x40_init_interrupts(unsigned int priority[]);
 extern void __init at91cap9_init_interrupts(unsigned int priority[]);
-extern void __init at572d940hf_init_interrupts(unsigned int priority[]);
 extern void __init at91_aic_init(unsigned int priority[]);
 
  /* Timer */
@@ -39,8 +50,19 @@ extern struct sys_timer at91x40_timer;
 
  /* Clocks */
 extern int __init at91_clock_init(unsigned long main_clock);
+/*
+ * function to specify the clock of the default console. As we do not
+ * use the device/driver bus, the dev_name is not intialize. So we need
+ * to link the clock to a specific con_id only "usart"
+ */
+extern void __init at91rm9200_set_console_clock(int id);
+extern void __init at91sam9260_set_console_clock(int id);
+extern void __init at91sam9261_set_console_clock(int id);
+extern void __init at91sam9263_set_console_clock(int id);
+extern void __init at91sam9rl_set_console_clock(int id);
+extern void __init at91sam9g45_set_console_clock(int id);
+extern void __init at91cap9_set_console_clock(int id);
 struct device;
-extern void __init at91_clock_associate(const char *id, struct device *dev, const char *func);
 
  /* Power Management */
 extern void at91_irq_suspend(void);
diff --git a/arch/arm/mach-at91/include/mach/at572d940hf.h b/arch/arm/mach-at91/include/mach/at572d940hf.h
deleted file mode 100644
index be510cf..0000000
--- a/arch/arm/mach-at91/include/mach/at572d940hf.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * include/mach/at572d940hf.h
- *
- * Antonio R. Costa <costa.antonior@gmail.com>
- * Copyright (C) 2008 Atmel
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#ifndef AT572D940HF_H
-#define AT572D940HF_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS		1	/* System Peripherals */
-#define AT572D940HF_ID_PIOA	2	/* Parallel IO Controller A */
-#define AT572D940HF_ID_PIOB	3	/* Parallel IO Controller B */
-#define AT572D940HF_ID_PIOC	4	/* Parallel IO Controller C */
-#define AT572D940HF_ID_EMAC	5	/* MACB ethernet controller */
-#define AT572D940HF_ID_US0	6	/* USART 0 */
-#define AT572D940HF_ID_US1	7	/* USART 1 */
-#define AT572D940HF_ID_US2	8	/* USART 2 */
-#define AT572D940HF_ID_MCI	9	/* Multimedia Card Interface */
-#define AT572D940HF_ID_UDP	10	/* USB Device Port */
-#define AT572D940HF_ID_TWI0	11	/* Two-Wire Interface 0 */
-#define AT572D940HF_ID_SPI0	12	/* Serial Peripheral Interface 0 */
-#define AT572D940HF_ID_SPI1	13	/* Serial Peripheral Interface 1 */
-#define AT572D940HF_ID_SSC0	14	/* Serial Synchronous Controller 0 */
-#define AT572D940HF_ID_SSC1	15	/* Serial Synchronous Controller 1 */
-#define AT572D940HF_ID_SSC2	16	/* Serial Synchronous Controller 2 */
-#define AT572D940HF_ID_TC0	17	/* Timer Counter 0 */
-#define AT572D940HF_ID_TC1	18	/* Timer Counter 1 */
-#define AT572D940HF_ID_TC2	19	/* Timer Counter 2 */
-#define AT572D940HF_ID_UHP	20	/* USB Host port */
-#define AT572D940HF_ID_SSC3	21	/* Serial Synchronous Controller 3 */
-#define AT572D940HF_ID_TWI1	22	/* Two-Wire Interface 1 */
-#define AT572D940HF_ID_CAN0	23	/* CAN Controller 0 */
-#define AT572D940HF_ID_CAN1	24	/* CAN Controller 1 */
-#define AT572D940HF_ID_MHALT	25	/* mAgicV HALT line */
-#define AT572D940HF_ID_MSIRQ0	26	/* mAgicV SIRQ0 line */
-#define AT572D940HF_ID_MEXC	27	/* mAgicV exception line */
-#define AT572D940HF_ID_MEDMA	28	/* mAgicV end of DMA line */
-#define AT572D940HF_ID_IRQ0	29	/* External Interrupt Source (IRQ0) */
-#define AT572D940HF_ID_IRQ1	30	/* External Interrupt Source (IRQ1) */
-#define AT572D940HF_ID_IRQ2	31	/* External Interrupt Source (IRQ2) */
-
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT572D940HF_BASE_TCB	0xfffa0000
-#define AT572D940HF_BASE_TC0	0xfffa0000
-#define AT572D940HF_BASE_TC1	0xfffa0040
-#define AT572D940HF_BASE_TC2	0xfffa0080
-#define AT572D940HF_BASE_UDP	0xfffa4000
-#define AT572D940HF_BASE_MCI	0xfffa8000
-#define AT572D940HF_BASE_TWI0	0xfffac000
-#define AT572D940HF_BASE_US0	0xfffb0000
-#define AT572D940HF_BASE_US1	0xfffb4000
-#define AT572D940HF_BASE_US2	0xfffb8000
-#define AT572D940HF_BASE_SSC0	0xfffbc000
-#define AT572D940HF_BASE_SSC1	0xfffc0000
-#define AT572D940HF_BASE_SSC2	0xfffc4000
-#define AT572D940HF_BASE_SPI0	0xfffc8000
-#define AT572D940HF_BASE_SPI1	0xfffcc000
-#define AT572D940HF_BASE_SSC3	0xfffd0000
-#define AT572D940HF_BASE_TWI1	0xfffd4000
-#define AT572D940HF_BASE_EMAC	0xfffd8000
-#define AT572D940HF_BASE_CAN0	0xfffdc000
-#define AT572D940HF_BASE_CAN1	0xfffe0000
-#define AT91_BASE_SYS		0xffffea00
-
-
-/*
- * System Peripherals (offset from AT91_BASE_SYS)
- */
-#define AT91_SDRAMC0	(0xffffea00 - AT91_BASE_SYS)
-#define AT91_SMC	(0xffffec00 - AT91_BASE_SYS)
-#define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
-#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
-#define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)
-#define AT91_PIOA	(0xfffff400 - AT91_BASE_SYS)
-#define AT91_PIOB	(0xfffff600 - AT91_BASE_SYS)
-#define AT91_PIOC	(0xfffff800 - AT91_BASE_SYS)
-#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
-#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
-#define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
-#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
-#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
-
-#define AT91_USART0	AT572D940HF_ID_US0
-#define AT91_USART1	AT572D940HF_ID_US1
-#define AT91_USART2	AT572D940HF_ID_US2
-
-
-/*
- * Internal Memory.
- */
-#define AT572D940HF_SRAM_BASE	0x00300000	/* Internal SRAM base address */
-#define AT572D940HF_SRAM_SIZE	(48 * SZ_1K)	/* Internal SRAM size (48Kb) */
-
-#define AT572D940HF_ROM_BASE	0x00400000	/* Internal ROM base address */
-#define AT572D940HF_ROM_SIZE	SZ_32K		/* Internal ROM size (32Kb) */
-
-#define AT572D940HF_UHP_BASE	0x00500000	/* USB Host controller */
-
-
-#endif
diff --git a/arch/arm/mach-at91/include/mach/at572d940hf_matrix.h b/arch/arm/mach-at91/include/mach/at572d940hf_matrix.h
deleted file mode 100644
index b6751df..0000000
--- a/arch/arm/mach-at91/include/mach/at572d940hf_matrix.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * include/mach//at572d940hf_matrix.h
- *
- * Antonio R. Costa <costa.antonior@gmail.com>
- * Copyright (C) 2008 Atmel
- *
- * Copyright (C) 2005 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef AT572D940HF_MATRIX_H
-#define AT572D940HF_MATRIX_H
-
-#define AT91_MATRIX_MCFG0	(AT91_MATRIX + 0x00)	/* Master Configuration Register 0 */
-#define AT91_MATRIX_MCFG1	(AT91_MATRIX + 0x04)	/* Master Configuration Register 1 */
-#define AT91_MATRIX_MCFG2	(AT91_MATRIX + 0x08)	/* Master Configuration Register 2 */
-#define AT91_MATRIX_MCFG3	(AT91_MATRIX + 0x0C)	/* Master Configuration Register 3 */
-#define AT91_MATRIX_MCFG4	(AT91_MATRIX + 0x10)	/* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x14)	/* Master Configuration Register 5 */
-
-#define		AT91_MATRIX_ULBT	(7 << 0)	/* Undefined Length Burst Type */
-#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
-#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
-#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
-#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
-#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
-
-#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x40)	/* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x44)	/* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x48)	/* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x4C)	/* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x50)	/* Slave Configuration Register 4 */
-#define		AT91_MATRIX_SLOT_CYCLE		(0xff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
-#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
-#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
-#define		AT91_MATRIX_FIXED_DEFMSTR	(0x7  << 18)	/* Fixed Index of Default Master */
-#define		AT91_MATRIX_ARBT		(3    << 24)	/* Arbitration Type */
-#define			AT91_MATRIX_ARBT_ROUND_ROBIN	(0 << 24)
-#define			AT91_MATRIX_ARBT_FIXED_PRIORITY	(1 << 24)
-
-#define AT91_MATRIX_PRAS0	(AT91_MATRIX + 0x80)	/* Priority Register A for Slave 0 */
-#define AT91_MATRIX_PRAS1	(AT91_MATRIX + 0x88)	/* Priority Register A for Slave 1 */
-#define AT91_MATRIX_PRAS2	(AT91_MATRIX + 0x90)	/* Priority Register A for Slave 2 */
-#define AT91_MATRIX_PRAS3	(AT91_MATRIX + 0x98)	/* Priority Register A for Slave 3 */
-#define AT91_MATRIX_PRAS4	(AT91_MATRIX + 0xA0)	/* Priority Register A for Slave 4 */
-
-#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
-#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
-#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
-#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
-#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
-#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
-#define		AT91_MATRIX_M6PR		(3 << 24)	/* Master 6 Priority */
-
-#define AT91_MATRIX_MRCR	(AT91_MATRIX + 0x100)	/* Master Remap Control Register */
-#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-
-#define AT91_MATRIX_SFR0	(AT91_MATRIX + 0x110)	/* Special Function Register 0 */
-#define AT91_MATRIX_SFR1	(AT91_MATRIX + 0x114)	/* Special Function Register 1 */
-#define AT91_MATRIX_SFR2	(AT91_MATRIX + 0x118)	/* Special Function Register 2 */
-#define AT91_MATRIX_SFR3	(AT91_MATRIX + 0x11C)	/* Special Function Register 3 */
-#define AT91_MATRIX_SFR4	(AT91_MATRIX + 0x120)	/* Special Function Register 4 */
-#define AT91_MATRIX_SFR5	(AT91_MATRIX + 0x124)	/* Special Function Register 5 */
-#define AT91_MATRIX_SFR6	(AT91_MATRIX + 0x128)	/* Special Function Register 6 */
-#define AT91_MATRIX_SFR7	(AT91_MATRIX + 0x12C)	/* Special Function Register 7 */
-#define AT91_MATRIX_SFR8	(AT91_MATRIX + 0x130)	/* Special Function Register 8 */
-#define AT91_MATRIX_SFR9	(AT91_MATRIX + 0x134)	/* Special Function Register 9 */
-#define AT91_MATRIX_SFR10	(AT91_MATRIX + 0x138)	/* Special Function Register 10 */
-#define AT91_MATRIX_SFR11	(AT91_MATRIX + 0x13C)	/* Special Function Register 11 */
-#define AT91_MATRIX_SFR12	(AT91_MATRIX + 0x140)	/* Special Function Register 12 */
-#define AT91_MATRIX_SFR13	(AT91_MATRIX + 0x144)	/* Special Function Register 13 */
-#define AT91_MATRIX_SFR14	(AT91_MATRIX + 0x148)	/* Special Function Register 14 */
-#define AT91_MATRIX_SFR15	(AT91_MATRIX + 0x14C)	/* Special Function Register 15 */
-
-
-/*
- * The following registers / bits are not defined in the Datasheet (Revision A)
- */
-
-#define AT91_MATRIX_TCR		(AT91_MATRIX + 0x100)	/* TCM Configuration Register */
-#define		AT91_MATRIX_ITCM_SIZE		(0xf << 0)	/* Size of ITCM enabled memory block */
-#define			AT91_MATRIX_ITCM_0		(0 << 0)
-#define			AT91_MATRIX_ITCM_16		(5 << 0)
-#define			AT91_MATRIX_ITCM_32		(6 << 0)
-#define			AT91_MATRIX_ITCM_64		(7 << 0)
-#define		AT91_MATRIX_DTCM_SIZE		(0xf << 4)	/* Size of DTCM enabled memory block */
-#define			AT91_MATRIX_DTCM_0		(0 << 4)
-#define			AT91_MATRIX_DTCM_16		(5 << 4)
-#define			AT91_MATRIX_DTCM_32		(6 << 4)
-#define			AT91_MATRIX_DTCM_64		(7 << 4)
-
-#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x11C)	/* EBI Chip Select Assignment Register */
-#define		AT91_MATRIX_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
-#define			AT91_MATRIX_CS1A_SMC		(0 << 1)
-#define			AT91_MATRIX_CS1A_SDRAMC		(1 << 1)
-#define		AT91_MATRIX_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
-#define			AT91_MATRIX_CS3A_SMC		(0 << 3)
-#define			AT91_MATRIX_CS3A_SMC_SMARTMEDIA	(1 << 3)
-#define		AT91_MATRIX_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
-#define			AT91_MATRIX_CS4A_SMC		(0 << 4)
-#define			AT91_MATRIX_CS4A_SMC_CF1	(1 << 4)
-#define		AT91_MATRIX_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
-#define			AT91_MATRIX_CS5A_SMC		(0 << 5)
-#define			AT91_MATRIX_CS5A_SMC_CF2	(1 << 5)
-#define		AT91_MATRIX_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
-
-#endif
diff --git a/arch/arm/mach-at91/include/mach/at91cap9.h b/arch/arm/mach-at91/include/mach/at91cap9.h
index 9c6af97..6659938 100644
--- a/arch/arm/mach-at91/include/mach/at91cap9.h
+++ b/arch/arm/mach-at91/include/mach/at91cap9.h
@@ -20,8 +20,6 @@
 /*
  * Peripheral identifiers/interrupts.
  */
-#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS		1	/* System Peripherals */
 #define AT91CAP9_ID_PIOABCD	2	/* Parallel IO Controller A, B, C and D */
 #define AT91CAP9_ID_MPB0	3	/* MP Block Peripheral 0 */
 #define AT91CAP9_ID_MPB1	4	/* MP Block Peripheral 1 */
@@ -123,6 +121,4 @@
 #define AT91CAP9_UDPHS_FIFO	0x00600000	/* USB High Speed Device Port */
 #define AT91CAP9_UHP_BASE	0x00700000	/* USB Host controller */
 
-#define CONFIG_DRAM_BASE	AT91_CHIPSELECT_6
-
 #endif
diff --git a/arch/arm/mach-at91/include/mach/at91rm9200.h b/arch/arm/mach-at91/include/mach/at91rm9200.h
index 7898315..99e0f8d 100644
--- a/arch/arm/mach-at91/include/mach/at91rm9200.h
+++ b/arch/arm/mach-at91/include/mach/at91rm9200.h
@@ -19,8 +19,6 @@
 /*
  * Peripheral identifiers/interrupts.
  */
-#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS		1	/* System Peripheral */
 #define AT91RM9200_ID_PIOA	2	/* Parallel IO Controller A */
 #define AT91RM9200_ID_PIOB	3	/* Parallel IO Controller B */
 #define AT91RM9200_ID_PIOC	4	/* Parallel IO Controller C */
diff --git a/arch/arm/mach-at91/include/mach/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h
index 4e79036..8b6bf83 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9260.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9260.h
@@ -20,8 +20,6 @@
 /*
  * Peripheral identifiers/interrupts.
  */
-#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS		1	/* System Peripherals */
 #define AT91SAM9260_ID_PIOA	2	/* Parallel IO Controller A */
 #define AT91SAM9260_ID_PIOB	3	/* Parallel IO Controller B */
 #define AT91SAM9260_ID_PIOC	4	/* Parallel IO Controller C */
diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h
index 2b56185..eafbdda 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9261.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9261.h
@@ -18,8 +18,6 @@
 /*
  * Peripheral identifiers/interrupts.
  */
-#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS		1	/* System Peripherals */
 #define AT91SAM9261_ID_PIOA	2	/* Parallel IO Controller A */
 #define AT91SAM9261_ID_PIOB	3	/* Parallel IO Controller B */
 #define AT91SAM9261_ID_PIOC	4	/* Parallel IO Controller C */
diff --git a/arch/arm/mach-at91/include/mach/at91sam9263.h b/arch/arm/mach-at91/include/mach/at91sam9263.h
index 2091f1e..e2d3482 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9263.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9263.h
@@ -18,8 +18,6 @@
 /*
  * Peripheral identifiers/interrupts.
  */
-#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS		1	/* System Peripherals */
 #define AT91SAM9263_ID_PIOA	2	/* Parallel IO Controller A */
 #define AT91SAM9263_ID_PIOB	3	/* Parallel IO Controller B */
 #define AT91SAM9263_ID_PIOCDE	4	/* Parallel IO Controller C, D and E */
diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h
index a526869..659304a 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9g45.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h
@@ -18,8 +18,6 @@
 /*
  * Peripheral identifiers/interrupts.
  */
-#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS		1	/* System Controller Interrupt */
 #define AT91SAM9G45_ID_PIOA	2	/* Parallel I/O Controller A */
 #define AT91SAM9G45_ID_PIOB	3	/* Parallel I/O Controller B */
 #define AT91SAM9G45_ID_PIOC	4	/* Parallel I/O Controller C */
@@ -131,8 +129,6 @@
 #define AT91SAM9G45_EHCI_BASE	0x00800000	/* USB Host controller (EHCI) */
 #define AT91SAM9G45_VDEC_BASE	0x00900000	/* Video Decoder Controller */
 
-#define CONFIG_DRAM_BASE	AT91_CHIPSELECT_6
-
 #define CONSISTENT_DMA_SIZE	SZ_4M
 
 /*
diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl.h b/arch/arm/mach-at91/include/mach/at91sam9rl.h
index 87ba851..41dbbe6 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9rl.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9rl.h
@@ -17,8 +17,6 @@
 /*
  * Peripheral identifiers/interrupts.
  */
-#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS		1	/* System Controller */
 #define AT91SAM9RL_ID_PIOA	2	/* Parallel IO Controller A */
 #define AT91SAM9RL_ID_PIOB	3	/* Parallel IO Controller B */
 #define AT91SAM9RL_ID_PIOC	4	/* Parallel IO Controller C */
diff --git a/arch/arm/mach-at91/include/mach/at91x40.h b/arch/arm/mach-at91/include/mach/at91x40.h
index 063ac44..a152ff8 100644
--- a/arch/arm/mach-at91/include/mach/at91x40.h
+++ b/arch/arm/mach-at91/include/mach/at91x40.h
@@ -15,8 +15,6 @@
 /*
  *	IRQ list.
  */
-#define AT91_ID_FIQ		0	/* FIQ */
-#define AT91_ID_SYS		1	/* System Peripheral */
 #define AT91X40_ID_USART0	2	/* USART port 0 */
 #define AT91X40_ID_USART1	3	/* USART port 1 */
 #define AT91X40_ID_TC0		4	/* Timer/Counter 0 */
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index 2b499eb..ed544a0 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -90,7 +90,7 @@ struct at91_eth_data {
 extern void __init at91_add_device_eth(struct at91_eth_data *data);
 
 #if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91SAM9G20) || defined(CONFIG_ARCH_AT91CAP9) \
-	|| defined(CONFIG_ARCH_AT91SAM9G45) || defined(CONFIG_ARCH_AT572D940HF)
+	|| defined(CONFIG_ARCH_AT91SAM9G45)
 #define eth_platform_data	at91_eth_data
 #endif
 
@@ -140,6 +140,7 @@ extern void __init at91_set_serial_console(unsigned portnr);
 extern struct platform_device *atmel_default_console_device;
 
 struct atmel_uart_data {
+	int			num;		/* port num */
 	short			use_dma_tx;	/* use transmit DMA? */
 	short			use_dma_rx;	/* use receive DMA? */
 	void __iomem		*regs;		/* virt. base address, if any */
@@ -203,9 +204,6 @@ extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
 extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
 extern void __init at91_pwm_leds(struct gpio_led *leds, int nr);
 
- /* AT572D940HF DSP */
-extern void __init at91_add_device_mAgic(void);
-
 /* FIXME: this needs a better location, but gets stuff building again */
 extern int at91_suspend_entering_slow_clock(void);
 
diff --git a/arch/arm/mach-at91/include/mach/clkdev.h b/arch/arm/mach-at91/include/mach/clkdev.h
new file mode 100644
index 0000000..04b37a8
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
index 0700f21..df966c2 100644
--- a/arch/arm/mach-at91/include/mach/cpu.h
+++ b/arch/arm/mach-at91/include/mach/cpu.h
@@ -34,8 +34,6 @@
 #define ARCH_ID_AT91SAM9XE256	0x329a93a0
 #define ARCH_ID_AT91SAM9XE512	0x329aa3a0
 
-#define ARCH_ID_AT572D940HF	0x0e0303e0
-
 #define ARCH_ID_AT91M40800	0x14080044
 #define ARCH_ID_AT91R40807	0x44080746
 #define ARCH_ID_AT91M40807	0x14080745
@@ -90,9 +88,16 @@ static inline unsigned long at91cap9_rev_identify(void)
 #endif
 
 #ifdef CONFIG_ARCH_AT91RM9200
+extern int rm9200_type;
+#define ARCH_REVISON_9200_BGA	(0 << 0)
+#define ARCH_REVISON_9200_PQFP	(1 << 0)
 #define cpu_is_at91rm9200()	(at91_cpu_identify() == ARCH_ID_AT91RM9200)
+#define cpu_is_at91rm9200_bga()	(!cpu_is_at91rm9200_pqfp())
+#define cpu_is_at91rm9200_pqfp() (cpu_is_at91rm9200() && rm9200_type & ARCH_REVISON_9200_PQFP)
 #else
 #define cpu_is_at91rm9200()	(0)
+#define cpu_is_at91rm9200_bga()	(0)
+#define cpu_is_at91rm9200_pqfp() (0)
 #endif
 
 #ifdef CONFIG_ARCH_AT91SAM9260
@@ -181,12 +186,6 @@ static inline unsigned long at91cap9_rev_identify(void)
 #define cpu_is_at91cap9_revC()	(0)
 #endif
 
-#ifdef CONFIG_ARCH_AT572D940HF
-#define cpu_is_at572d940hf() (at91_cpu_identify() == ARCH_ID_AT572D940HF)
-#else
-#define cpu_is_at572d940hf() (0)
-#endif
-
 /*
  * Since this is ARM, we will never run on any AVR32 CPU. But these
  * definitions may reduce clutter in common drivers.
diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
index 3d64a75..1008b9f 100644
--- a/arch/arm/mach-at91/include/mach/hardware.h
+++ b/arch/arm/mach-at91/include/mach/hardware.h
@@ -32,13 +32,17 @@
 #include <mach/at91cap9.h>
 #elif defined(CONFIG_ARCH_AT91X40)
 #include <mach/at91x40.h>
-#elif defined(CONFIG_ARCH_AT572D940HF)
-#include <mach/at572d940hf.h>
 #else
 #error "Unsupported AT91 processor"
 #endif
 
 
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS		1	/* System Peripherals */
+
 #ifdef CONFIG_MMU
 /*
  * Remap the peripherals from address 0xFFF78000 .. 0xFFFFFFFF
@@ -82,13 +86,6 @@
 #define AT91_CHIPSELECT_6	0x70000000
 #define AT91_CHIPSELECT_7	0x80000000
 
-/* SDRAM */
-#ifdef CONFIG_DRAM_BASE
-#define AT91_SDRAM_BASE		CONFIG_DRAM_BASE
-#else
-#define AT91_SDRAM_BASE		AT91_CHIPSELECT_1
-#endif
-
 /* Clocks */
 #define AT91_SLOW_CLOCK		32768		/* slow clock */
 
diff --git a/arch/arm/mach-at91/include/mach/memory.h b/arch/arm/mach-at91/include/mach/memory.h
index c2cfe50..401c207 100644
--- a/arch/arm/mach-at91/include/mach/memory.h
+++ b/arch/arm/mach-at91/include/mach/memory.h
@@ -23,6 +23,4 @@
 
 #include <mach/hardware.h>
 
-#define PLAT_PHYS_OFFSET	(AT91_SDRAM_BASE)
-
 #endif
diff --git a/arch/arm/mach-at91/include/mach/stamp9g20.h b/arch/arm/mach-at91/include/mach/stamp9g20.h
index 6120f9c..f62c0ab 100644
--- a/arch/arm/mach-at91/include/mach/stamp9g20.h
+++ b/arch/arm/mach-at91/include/mach/stamp9g20.h
@@ -1,7 +1,7 @@
 #ifndef __MACH_STAMP9G20_H
 #define __MACH_STAMP9G20_H
 
-void stamp9g20_map_io(void);
+void stamp9g20_init_early(void);
 void stamp9g20_board_init(void);
 
 #endif
diff --git a/arch/arm/mach-at91/include/mach/system_rev.h b/arch/arm/mach-at91/include/mach/system_rev.h
new file mode 100644
index 0000000..b855ee7
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/system_rev.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Under GPLv2 only
+ */
+
+#ifndef __ARCH_SYSTEM_REV_H__
+#define __ARCH_SYSTEM_REV_H__
+
+/*
+ * board revision encoding
+ * mach specific
+ * the 16-31 bit are reserved for at91 generic information
+ *
+ * bit 31:
+ *	0 => nand 16 bit
+ *	1 => nand 8 bit
+ */
+#define BOARD_HAVE_NAND_8BIT	(1 << 31)
+static int inline board_have_nand_8bit(void)
+{
+	return system_rev & BOARD_HAVE_NAND_8BIT;
+}
+
+#endif /* __ARCH_SYSTEM_REV_H__ */
diff --git a/arch/arm/mach-at91/include/mach/timex.h b/arch/arm/mach-at91/include/mach/timex.h
index 05a6e8a..31ac2d9 100644
--- a/arch/arm/mach-at91/include/mach/timex.h
+++ b/arch/arm/mach-at91/include/mach/timex.h
@@ -82,11 +82,6 @@
 #define AT91X40_MASTER_CLOCK	40000000
 #define CLOCK_TICK_RATE		(AT91X40_MASTER_CLOCK)
 
-#elif defined(CONFIG_ARCH_AT572D940HF)
-
-#define AT572D940HF_MASTER_CLOCK	80000000
-#define CLOCK_TICK_RATE		(AT572D940HF_MASTER_CLOCK/16)
-
 #endif
 
 #endif
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index b95b919..133aac4 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -1055,7 +1055,7 @@ int da850_register_pm(struct platform_device *pdev)
 	if (!pdata->cpupll_reg_base)
 		return -ENOMEM;
 
-	pdata->ddrpll_reg_base = ioremap(DA8XX_PLL1_BASE, SZ_4K);
+	pdata->ddrpll_reg_base = ioremap(DA850_PLL1_BASE, SZ_4K);
 	if (!pdata->ddrpll_reg_base) {
 		ret = -ENOMEM;
 		goto no_ddrpll_mem;
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 58a02dc..4e66881 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -24,23 +24,25 @@
 #include "clock.h"
 
 #define DA8XX_TPCC_BASE			0x01c00000
-#define DA850_MMCSD1_BASE		0x01e1b000
-#define DA850_TPCC1_BASE		0x01e30000
 #define DA8XX_TPTC0_BASE		0x01c08000
 #define DA8XX_TPTC1_BASE		0x01c08400
-#define DA850_TPTC2_BASE		0x01e38000
 #define DA8XX_WDOG_BASE			0x01c21000 /* DA8XX_TIMER64P1_BASE */
 #define DA8XX_I2C0_BASE			0x01c22000
-#define DA8XX_RTC_BASE			0x01C23000
+#define DA8XX_RTC_BASE			0x01c23000
+#define DA8XX_MMCSD0_BASE		0x01c40000
+#define DA8XX_SPI0_BASE			0x01c41000
+#define DA830_SPI1_BASE			0x01e12000
+#define DA8XX_LCD_CNTRL_BASE		0x01e13000
+#define DA850_MMCSD1_BASE		0x01e1b000
 #define DA8XX_EMAC_CPPI_PORT_BASE	0x01e20000
 #define DA8XX_EMAC_CPGMACSS_BASE	0x01e22000
 #define DA8XX_EMAC_CPGMAC_BASE		0x01e23000
 #define DA8XX_EMAC_MDIO_BASE		0x01e24000
-#define DA8XX_GPIO_BASE			0x01e26000
 #define DA8XX_I2C1_BASE			0x01e28000
-#define DA8XX_SPI0_BASE			0x01c41000
-#define DA830_SPI1_BASE			0x01e12000
+#define DA850_TPCC1_BASE		0x01e30000
+#define DA850_TPTC2_BASE		0x01e38000
 #define DA850_SPI1_BASE			0x01f0e000
+#define DA8XX_DDR2_CTL_BASE		0xb0000000
 
 #define DA8XX_EMAC_CTRL_REG_OFFSET	0x3000
 #define DA8XX_EMAC_MOD_REG_OFFSET	0x2000
diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
index 22ebc64..8f4f736 100644
--- a/arch/arm/mach-davinci/devices.c
+++ b/arch/arm/mach-davinci/devices.c
@@ -33,6 +33,9 @@
 #define DM365_MMCSD0_BASE	     0x01D11000
 #define DM365_MMCSD1_BASE	     0x01D00000
 
+/* System control register offsets */
+#define DM64XX_VDD3P3V_PWDN	0x48
+
 static struct resource i2c_resources[] = {
 	{
 		.start		= DAVINCI_I2C_BASE,
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index e4fc1af..ad64da7 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -64,13 +64,9 @@ extern unsigned int da850_max_speed;
 #define DA8XX_TIMER64P1_BASE	0x01c21000
 #define DA8XX_GPIO_BASE		0x01e26000
 #define DA8XX_PSC1_BASE		0x01e27000
-#define DA8XX_LCD_CNTRL_BASE	0x01e13000
-#define DA8XX_PLL1_BASE		0x01e1a000
-#define DA8XX_MMCSD0_BASE	0x01c40000
 #define DA8XX_AEMIF_CS2_BASE	0x60000000
 #define DA8XX_AEMIF_CS3_BASE	0x62000000
 #define DA8XX_AEMIF_CTL_BASE	0x68000000
-#define DA8XX_DDR2_CTL_BASE	0xb0000000
 #define DA8XX_ARM_RAM_BASE	0xffff0000
 
 void __init da830_init(void);
diff --git a/arch/arm/mach-davinci/include/mach/hardware.h b/arch/arm/mach-davinci/include/mach/hardware.h
index c45ba1f..414e0b9 100644
--- a/arch/arm/mach-davinci/include/mach/hardware.h
+++ b/arch/arm/mach-davinci/include/mach/hardware.h
@@ -21,9 +21,6 @@
  */
 #define DAVINCI_SYSTEM_MODULE_BASE        0x01C40000
 
-/* System control register offsets */
-#define DM64XX_VDD3P3V_PWDN	0x48
-
 /*
  * I/O mapping
  */
diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
index 8051962..b92c1e5 100644
--- a/arch/arm/mach-exynos4/Kconfig
+++ b/arch/arm/mach-exynos4/Kconfig
@@ -169,9 +169,11 @@ config MACH_NURI
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_HSMMC3
 	select S3C_DEV_I2C1
+	select S3C_DEV_I2C3
 	select S3C_DEV_I2C5
 	select S5P_DEV_USB_EHCI
 	select EXYNOS4_SETUP_I2C1
+	select EXYNOS4_SETUP_I2C3
 	select EXYNOS4_SETUP_I2C5
 	select EXYNOS4_SETUP_SDHCI
 	select SAMSUNG_DEV_PWM
diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile
index 7778975..683fc38 100644
--- a/arch/arm/mach-exynos4/Makefile
+++ b/arch/arm/mach-exynos4/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_CPU_EXYNOS4210)	+= cpu.o init.o clock.o irq-combiner.o
 obj-$(CONFIG_CPU_EXYNOS4210)	+= setup-i2c0.o gpiolib.o irq-eint.o dma.o
 obj-$(CONFIG_PM)		+= pm.o sleep.o
 obj-$(CONFIG_CPU_FREQ)		+= cpufreq.o
+obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
 
 obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
 
diff --git a/arch/arm/mach-exynos4/cpuidle.c b/arch/arm/mach-exynos4/cpuidle.c
new file mode 100644
index 0000000..bf7e96f
--- /dev/null
+++ b/arch/arm/mach-exynos4/cpuidle.c
@@ -0,0 +1,86 @@
+/* linux/arch/arm/mach-exynos4/cpuidle.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/cpuidle.h>
+#include <linux/io.h>
+
+#include <asm/proc-fns.h>
+
+static int exynos4_enter_idle(struct cpuidle_device *dev,
+			      struct cpuidle_state *state);
+
+static struct cpuidle_state exynos4_cpuidle_set[] = {
+	[0] = {
+		.enter			= exynos4_enter_idle,
+		.exit_latency		= 1,
+		.target_residency	= 100000,
+		.flags			= CPUIDLE_FLAG_TIME_VALID,
+		.name			= "IDLE",
+		.desc			= "ARM clock gating(WFI)",
+	},
+};
+
+static DEFINE_PER_CPU(struct cpuidle_device, exynos4_cpuidle_device);
+
+static struct cpuidle_driver exynos4_idle_driver = {
+	.name		= "exynos4_idle",
+	.owner		= THIS_MODULE,
+};
+
+static int exynos4_enter_idle(struct cpuidle_device *dev,
+			      struct cpuidle_state *state)
+{
+	struct timeval before, after;
+	int idle_time;
+
+	local_irq_disable();
+	do_gettimeofday(&before);
+
+	cpu_do_idle();
+
+	do_gettimeofday(&after);
+	local_irq_enable();
+	idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC +
+		    (after.tv_usec - before.tv_usec);
+
+	return idle_time;
+}
+
+static int __init exynos4_init_cpuidle(void)
+{
+	int i, max_cpuidle_state, cpu_id;
+	struct cpuidle_device *device;
+
+	cpuidle_register_driver(&exynos4_idle_driver);
+
+	for_each_cpu(cpu_id, cpu_online_mask) {
+		device = &per_cpu(exynos4_cpuidle_device, cpu_id);
+		device->cpu = cpu_id;
+
+		device->state_count = (sizeof(exynos4_cpuidle_set) /
+					       sizeof(struct cpuidle_state));
+
+		max_cpuidle_state = device->state_count;
+
+		for (i = 0; i < max_cpuidle_state; i++) {
+			memcpy(&device->states[i], &exynos4_cpuidle_set[i],
+					sizeof(struct cpuidle_state));
+		}
+
+		if (cpuidle_register_device(device)) {
+			printk(KERN_ERR "CPUidle register device failed\n,");
+			return -EIO;
+		}
+	}
+	return 0;
+}
+device_initcall(exynos4_init_cpuidle);
diff --git a/arch/arm/mach-exynos4/mach-nuri.c b/arch/arm/mach-exynos4/mach-nuri.c
index bb5d12f..642702b 100644
--- a/arch/arm/mach-exynos4/mach-nuri.c
+++ b/arch/arm/mach-exynos4/mach-nuri.c
@@ -12,6 +12,7 @@
 #include <linux/serial_core.h>
 #include <linux/input.h>
 #include <linux/i2c.h>
+#include <linux/i2c/atmel_mxt_ts.h>
 #include <linux/gpio_keys.h>
 #include <linux/gpio.h>
 #include <linux/regulator/machine.h>
@@ -32,6 +33,8 @@
 #include <plat/sdhci.h>
 #include <plat/ehci.h>
 #include <plat/clock.h>
+#include <plat/gpio-cfg.h>
+#include <plat/iic.h>
 
 #include <mach/map.h>
 
@@ -259,6 +262,88 @@ static struct i2c_board_info i2c1_devs[] __initdata = {
 	/* Gyro, To be updated */
 };
 
+/* TSP */
+static u8 mxt_init_vals[] = {
+	/* MXT_GEN_COMMAND(6) */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	/* MXT_GEN_POWER(7) */
+	0x20, 0xff, 0x32,
+	/* MXT_GEN_ACQUIRE(8) */
+	0x0a, 0x00, 0x05, 0x00, 0x00, 0x00, 0x09, 0x23,
+	/* MXT_TOUCH_MULTI(9) */
+	0x00, 0x00, 0x00, 0x13, 0x0b, 0x00, 0x00, 0x00, 0x02, 0x00,
+	0x00, 0x01, 0x01, 0x0e, 0x0a, 0x0a, 0x0a, 0x0a, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00,
+	/* MXT_TOUCH_KEYARRAY(15) */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00,
+	0x00,
+	/* MXT_SPT_GPIOPWM(19) */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	/* MXT_PROCI_GRIPFACE(20) */
+	0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x28, 0x04,
+	0x0f, 0x0a,
+	/* MXT_PROCG_NOISE(22) */
+	0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x23, 0x00,
+	0x00, 0x05, 0x0f, 0x19, 0x23, 0x2d, 0x03,
+	/* MXT_TOUCH_PROXIMITY(23) */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00,
+	/* MXT_PROCI_ONETOUCH(24) */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	/* MXT_SPT_SELFTEST(25) */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00,
+	/* MXT_PROCI_TWOTOUCH(27) */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	/* MXT_SPT_CTECONFIG(28) */
+	0x00, 0x00, 0x02, 0x08, 0x10, 0x00,
+};
+
+static struct mxt_platform_data mxt_platform_data = {
+	.config			= mxt_init_vals,
+	.config_length		= ARRAY_SIZE(mxt_init_vals),
+
+	.x_line			= 18,
+	.y_line			= 11,
+	.x_size			= 1024,
+	.y_size			= 600,
+	.blen			= 0x1,
+	.threshold		= 0x28,
+	.voltage		= 2800000,		/* 2.8V */
+	.orient			= MXT_DIAGONAL_COUNTER,
+	.irqflags		= IRQF_TRIGGER_FALLING,
+};
+
+static struct s3c2410_platform_i2c i2c3_data __initdata = {
+	.flags		= 0,
+	.bus_num	= 3,
+	.slave_addr	= 0x10,
+	.frequency	= 400 * 1000,
+	.sda_delay	= 100,
+};
+
+static struct i2c_board_info i2c3_devs[] __initdata = {
+	{
+		I2C_BOARD_INFO("atmel_mxt_ts", 0x4a),
+		.platform_data	= &mxt_platform_data,
+		.irq		= IRQ_EINT(4),
+	},
+};
+
+static void __init nuri_tsp_init(void)
+{
+	int gpio;
+
+	/* TOUCH_INT: XEINT_4 */
+	gpio = EXYNOS4_GPX0(4);
+	gpio_request(gpio, "TOUCH_INT");
+	s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
+	s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
+}
+
 /* GPIO I2C 5 (PMIC) */
 static struct i2c_board_info i2c5_devs[] __initdata = {
 	/* max8997, To be updated */
@@ -283,6 +368,7 @@ static struct platform_device *nuri_devices[] __initdata = {
 	&s3c_device_wdt,
 	&s3c_device_timer[0],
 	&s5p_device_ehci,
+	&s3c_device_i2c3,
 
 	/* NURI Devices */
 	&nuri_gpio_keys,
@@ -300,8 +386,11 @@ static void __init nuri_map_io(void)
 static void __init nuri_machine_init(void)
 {
 	nuri_sdhci_init();
+	nuri_tsp_init();
 
 	i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
+	s3c_i2c3_set_platdata(&i2c3_data);
+	i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs));
 	i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));
 
 	nuri_ehci_init();
diff --git a/arch/arm/mach-netx/fb.c b/arch/arm/mach-netx/fb.c
index 5b84bcd..b991323 100644
--- a/arch/arm/mach-netx/fb.c
+++ b/arch/arm/mach-netx/fb.c
@@ -103,7 +103,6 @@ static struct amba_device fb_device = {
 		.flags	= IORESOURCE_MEM,
 	},
 	.irq		= { NETX_IRQ_LCD, NO_IRQ },
-	.periphid	= 0x10112400,
 };
 
 int netx_fb_init(struct clcd_board *board, struct clcd_panel *panel)
diff --git a/arch/arm/mach-s3c64xx/dev-spi.c b/arch/arm/mach-s3c64xx/dev-spi.c
index 405e621..82db072 100644
--- a/arch/arm/mach-s3c64xx/dev-spi.c
+++ b/arch/arm/mach-s3c64xx/dev-spi.c
@@ -16,7 +16,6 @@
 
 #include <mach/dma.h>
 #include <mach/map.h>
-#include <mach/gpio-bank-c.h>
 #include <mach/spi-clocks.h>
 #include <mach/irqs.h>
 
@@ -40,23 +39,15 @@ static char *spi_src_clks[] = {
  */
 static int s3c64xx_spi_cfg_gpio(struct platform_device *pdev)
 {
+	unsigned int base;
+
 	switch (pdev->id) {
 	case 0:
-		s3c_gpio_cfgpin(S3C64XX_GPC(0), S3C64XX_GPC0_SPI_MISO0);
-		s3c_gpio_cfgpin(S3C64XX_GPC(1), S3C64XX_GPC1_SPI_CLKO);
-		s3c_gpio_cfgpin(S3C64XX_GPC(2), S3C64XX_GPC2_SPI_MOSIO);
-		s3c_gpio_setpull(S3C64XX_GPC(0), S3C_GPIO_PULL_UP);
-		s3c_gpio_setpull(S3C64XX_GPC(1), S3C_GPIO_PULL_UP);
-		s3c_gpio_setpull(S3C64XX_GPC(2), S3C_GPIO_PULL_UP);
+		base = S3C64XX_GPC(0);
 		break;
 
 	case 1:
-		s3c_gpio_cfgpin(S3C64XX_GPC(4), S3C64XX_GPC4_SPI_MISO1);
-		s3c_gpio_cfgpin(S3C64XX_GPC(5), S3C64XX_GPC5_SPI_CLK1);
-		s3c_gpio_cfgpin(S3C64XX_GPC(6), S3C64XX_GPC6_SPI_MOSI1);
-		s3c_gpio_setpull(S3C64XX_GPC(4), S3C_GPIO_PULL_UP);
-		s3c_gpio_setpull(S3C64XX_GPC(5), S3C_GPIO_PULL_UP);
-		s3c_gpio_setpull(S3C64XX_GPC(6), S3C_GPIO_PULL_UP);
+		base = S3C64XX_GPC(4);
 		break;
 
 	default:
@@ -64,6 +55,9 @@ static int s3c64xx_spi_cfg_gpio(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
+	s3c_gpio_cfgall_range(base, 3,
+			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+
 	return 0;
 }
 
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h
deleted file mode 100644
index 34212e1..0000000
--- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * 	Ben Dooks <ben@simtec.co.uk>
- * 	http://armlinux.simtec.co.uk/
- *
- * GPIO Bank A register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPACON			(S3C64XX_GPA_BASE + 0x00)
-#define S3C64XX_GPADAT			(S3C64XX_GPA_BASE + 0x04)
-#define S3C64XX_GPAPUD			(S3C64XX_GPA_BASE + 0x08)
-#define S3C64XX_GPACONSLP		(S3C64XX_GPA_BASE + 0x0c)
-#define S3C64XX_GPAPUDSLP		(S3C64XX_GPA_BASE + 0x10)
-
-#define S3C64XX_GPA_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
-#define S3C64XX_GPA_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
-#define S3C64XX_GPA_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
-
-#define S3C64XX_GPA0_UART_RXD0		(0x02 << 0)
-#define S3C64XX_GPA0_EINT_G1_0		(0x07 << 0)
-
-#define S3C64XX_GPA1_UART_TXD0		(0x02 << 4)
-#define S3C64XX_GPA1_EINT_G1_1		(0x07 << 4)
-
-#define S3C64XX_GPA2_UART_nCTS0		(0x02 << 8)
-#define S3C64XX_GPA2_EINT_G1_2		(0x07 << 8)
-
-#define S3C64XX_GPA3_UART_nRTS0		(0x02 << 12)
-#define S3C64XX_GPA3_EINT_G1_3		(0x07 << 12)
-
-#define S3C64XX_GPA4_UART_RXD1		(0x02 << 16)
-#define S3C64XX_GPA4_EINT_G1_4		(0x07 << 16)
-
-#define S3C64XX_GPA5_UART_TXD1		(0x02 << 20)
-#define S3C64XX_GPA5_EINT_G1_5		(0x07 << 20)
-
-#define S3C64XX_GPA6_UART_nCTS1		(0x02 << 24)
-#define S3C64XX_GPA6_EINT_G1_6		(0x07 << 24)
-
-#define S3C64XX_GPA7_UART_nRTS1		(0x02 << 28)
-#define S3C64XX_GPA7_EINT_G1_7		(0x07 << 28)
-
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h
deleted file mode 100644
index 7232c03..0000000
--- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * 	Ben Dooks <ben@simtec.co.uk>
- * 	http://armlinux.simtec.co.uk/
- *
- * GPIO Bank B register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPBCON			(S3C64XX_GPB_BASE + 0x00)
-#define S3C64XX_GPBDAT			(S3C64XX_GPB_BASE + 0x04)
-#define S3C64XX_GPBPUD			(S3C64XX_GPB_BASE + 0x08)
-#define S3C64XX_GPBCONSLP		(S3C64XX_GPB_BASE + 0x0c)
-#define S3C64XX_GPBPUDSLP		(S3C64XX_GPB_BASE + 0x10)
-
-#define S3C64XX_GPB_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
-#define S3C64XX_GPB_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
-#define S3C64XX_GPB_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
-
-#define S3C64XX_GPB0_UART_RXD2		(0x02 << 0)
-#define S3C64XX_GPB0_EXTDMA_REQ		(0x03 << 0)
-#define S3C64XX_GPB0_IrDA_RXD		(0x04 << 0)
-#define S3C64XX_GPB0_ADDR_CF0		(0x05 << 0)
-#define S3C64XX_GPB0_EINT_G1_8		(0x07 << 0)
-
-#define S3C64XX_GPB1_UART_TXD2		(0x02 << 4)
-#define S3C64XX_GPB1_EXTDMA_ACK		(0x03 << 4)
-#define S3C64XX_GPB1_IrDA_TXD		(0x04 << 4)
-#define S3C64XX_GPB1_ADDR_CF1		(0x05 << 4)
-#define S3C64XX_GPB1_EINT_G1_9		(0x07 << 4)
-
-#define S3C64XX_GPB2_UART_RXD3		(0x02 << 8)
-#define S3C64XX_GPB2_IrDA_RXD		(0x03 << 8)
-#define S3C64XX_GPB2_EXTDMA_REQ		(0x04 << 8)
-#define S3C64XX_GPB2_ADDR_CF2		(0x05 << 8)
-#define S3C64XX_GPB2_I2C_SCL1		(0x06 << 8)
-#define S3C64XX_GPB2_EINT_G1_10		(0x07 << 8)
-
-#define S3C64XX_GPB3_UART_TXD3		(0x02 << 12)
-#define S3C64XX_GPB3_IrDA_TXD		(0x03 << 12)
-#define S3C64XX_GPB3_EXTDMA_ACK		(0x04 << 12)
-#define S3C64XX_GPB3_I2C_SDA1		(0x06 << 12)
-#define S3C64XX_GPB3_EINT_G1_11		(0x07 << 12)
-
-#define S3C64XX_GPB4_IrDA_SDBW		(0x02 << 16)
-#define S3C64XX_GPB4_CAM_FIELD		(0x03 << 16)
-#define S3C64XX_GPB4_CF_DATA_DIR	(0x04 << 16)
-#define S3C64XX_GPB4_EINT_G1_12		(0x07 << 16)
-
-#define S3C64XX_GPB5_I2C_SCL0		(0x02 << 20)
-#define S3C64XX_GPB5_EINT_G1_13		(0x07 << 20)
-
-#define S3C64XX_GPB6_I2C_SDA0		(0x02 << 24)
-#define S3C64XX_GPB6_EINT_G1_14		(0x07 << 24)
-
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h
deleted file mode 100644
index db189ab..0000000
--- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * 	Ben Dooks <ben@simtec.co.uk>
- * 	http://armlinux.simtec.co.uk/
- *
- * GPIO Bank C register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPCCON			(S3C64XX_GPC_BASE + 0x00)
-#define S3C64XX_GPCDAT			(S3C64XX_GPC_BASE + 0x04)
-#define S3C64XX_GPCPUD			(S3C64XX_GPC_BASE + 0x08)
-#define S3C64XX_GPCCONSLP		(S3C64XX_GPC_BASE + 0x0c)
-#define S3C64XX_GPCPUDSLP		(S3C64XX_GPC_BASE + 0x10)
-
-#define S3C64XX_GPC_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
-#define S3C64XX_GPC_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
-#define S3C64XX_GPC_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
-
-#define S3C64XX_GPC0_SPI_MISO0		(0x02 << 0)
-#define S3C64XX_GPC0_EINT_G2_0		(0x07 << 0)
-
-#define S3C64XX_GPC1_SPI_CLKO		(0x02 << 4)
-#define S3C64XX_GPC1_EINT_G2_1		(0x07 << 4)
-
-#define S3C64XX_GPC2_SPI_MOSIO		(0x02 << 8)
-#define S3C64XX_GPC2_EINT_G2_2		(0x07 << 8)
-
-#define S3C64XX_GPC3_SPI_nCSO		(0x02 << 12)
-#define S3C64XX_GPC3_EINT_G2_3		(0x07 << 12)
-
-#define S3C64XX_GPC4_SPI_MISO1		(0x02 << 16)
-#define S3C64XX_GPC4_MMC2_CMD		(0x03 << 16)
-#define S3C64XX_GPC4_I2S_V40_DO0	(0x05 << 16)
-#define S3C64XX_GPC4_EINT_G2_4		(0x07 << 16)
-
-#define S3C64XX_GPC5_SPI_CLK1		(0x02 << 20)
-#define S3C64XX_GPC5_MMC2_CLK		(0x03 << 20)
-#define S3C64XX_GPC5_I2S_V40_DO1	(0x05 << 20)
-#define S3C64XX_GPC5_EINT_G2_5		(0x07 << 20)
-
-#define S3C64XX_GPC6_SPI_MOSI1		(0x02 << 24)
-#define S3C64XX_GPC6_EINT_G2_6		(0x07 << 24)
-
-#define S3C64XX_GPC7_SPI_nCS1		(0x02 << 28)
-#define S3C64XX_GPC7_I2S_V40_DO2	(0x05 << 28)
-#define S3C64XX_GPC7_EINT_G2_7		(0x07 << 28)
-
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h
deleted file mode 100644
index 1a01cee..0000000
--- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * 	Ben Dooks <ben@simtec.co.uk>
- * 	http://armlinux.simtec.co.uk/
- *
- * GPIO Bank D register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPDCON			(S3C64XX_GPD_BASE + 0x00)
-#define S3C64XX_GPDDAT			(S3C64XX_GPD_BASE + 0x04)
-#define S3C64XX_GPDPUD			(S3C64XX_GPD_BASE + 0x08)
-#define S3C64XX_GPDCONSLP		(S3C64XX_GPD_BASE + 0x0c)
-#define S3C64XX_GPDPUDSLP		(S3C64XX_GPD_BASE + 0x10)
-
-#define S3C64XX_GPD_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
-#define S3C64XX_GPD_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
-#define S3C64XX_GPD_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
-
-#define S3C64XX_GPD0_PCM0_SCLK		(0x02 << 0)
-#define S3C64XX_GPD0_I2S0_CLK		(0x03 << 0)
-#define S3C64XX_GPD0_AC97_BITCLK	(0x04 << 0)
-#define S3C64XX_GPD0_EINT_G3_0		(0x07 << 0)
-
-#define S3C64XX_GPD1_PCM0_EXTCLK	(0x02 << 4)
-#define S3C64XX_GPD1_I2S0_CDCLK		(0x03 << 4)
-#define S3C64XX_GPD1_AC97_nRESET	(0x04 << 4)
-#define S3C64XX_GPD1_EINT_G3_1		(0x07 << 4)
-
-#define S3C64XX_GPD2_PCM0_FSYNC		(0x02 << 8)
-#define S3C64XX_GPD2_I2S0_LRCLK		(0x03 << 8)
-#define S3C64XX_GPD2_AC97_SYNC		(0x04 << 8)
-#define S3C64XX_GPD2_EINT_G3_2		(0x07 << 8)
-
-#define S3C64XX_GPD3_PCM0_SIN		(0x02 << 12)
-#define S3C64XX_GPD3_I2S0_DI		(0x03 << 12)
-#define S3C64XX_GPD3_AC97_SDI		(0x04 << 12)
-#define S3C64XX_GPD3_EINT_G3_3		(0x07 << 12)
-
-#define S3C64XX_GPD4_PCM0_SOUT		(0x02 << 16)
-#define S3C64XX_GPD4_I2S0_D0		(0x03 << 16)
-#define S3C64XX_GPD4_AC97_SDO		(0x04 << 16)
-#define S3C64XX_GPD4_EINT_G3_4		(0x07 << 16)
-
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h
deleted file mode 100644
index f057adb..0000000
--- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * 	Ben Dooks <ben@simtec.co.uk>
- * 	http://armlinux.simtec.co.uk/
- *
- * GPIO Bank E register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPECON			(S3C64XX_GPE_BASE + 0x00)
-#define S3C64XX_GPEDAT			(S3C64XX_GPE_BASE + 0x04)
-#define S3C64XX_GPEPUD			(S3C64XX_GPE_BASE + 0x08)
-#define S3C64XX_GPECONSLP		(S3C64XX_GPE_BASE + 0x0c)
-#define S3C64XX_GPEPUDSLP		(S3C64XX_GPE_BASE + 0x10)
-
-#define S3C64XX_GPE_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
-#define S3C64XX_GPE_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
-#define S3C64XX_GPE_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
-
-#define S3C64XX_GPE0_PCM1_SCLK		(0x02 << 0)
-#define S3C64XX_GPE0_I2S1_CLK		(0x03 << 0)
-#define S3C64XX_GPE0_AC97_BITCLK	(0x04 << 0)
-
-#define S3C64XX_GPE1_PCM1_EXTCLK	(0x02 << 4)
-#define S3C64XX_GPE1_I2S1_CDCLK		(0x03 << 4)
-#define S3C64XX_GPE1_AC97_nRESET	(0x04 << 4)
-
-#define S3C64XX_GPE2_PCM1_FSYNC		(0x02 << 8)
-#define S3C64XX_GPE2_I2S1_LRCLK		(0x03 << 8)
-#define S3C64XX_GPE2_AC97_SYNC		(0x04 << 8)
-
-#define S3C64XX_GPE3_PCM1_SIN		(0x02 << 12)
-#define S3C64XX_GPE3_I2S1_DI		(0x03 << 12)
-#define S3C64XX_GPE3_AC97_SDI		(0x04 << 12)
-
-#define S3C64XX_GPE4_PCM1_SOUT		(0x02 << 16)
-#define S3C64XX_GPE4_I2S1_D0		(0x03 << 16)
-#define S3C64XX_GPE4_AC97_SDO		(0x04 << 16)
-
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h
deleted file mode 100644
index 62ab8f5..0000000
--- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * 	Ben Dooks <ben@simtec.co.uk>
- * 	http://armlinux.simtec.co.uk/
- *
- * GPIO Bank F register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPFCON			(S3C64XX_GPF_BASE + 0x00)
-#define S3C64XX_GPFDAT			(S3C64XX_GPF_BASE + 0x04)
-#define S3C64XX_GPFPUD			(S3C64XX_GPF_BASE + 0x08)
-#define S3C64XX_GPFCONSLP		(S3C64XX_GPF_BASE + 0x0c)
-#define S3C64XX_GPFPUDSLP		(S3C64XX_GPF_BASE + 0x10)
-
-#define S3C64XX_GPF_CONMASK(__gpio)	(0x3 << ((__gpio) * 2))
-#define S3C64XX_GPF_INPUT(__gpio)	(0x0 << ((__gpio) * 2))
-#define S3C64XX_GPF_OUTPUT(__gpio)	(0x1 << ((__gpio) * 2))
-
-#define S3C64XX_GPF0_CAMIF_CLK		(0x02 << 0)
-#define S3C64XX_GPF0_EINT_G4_0		(0x03 << 0)
-
-#define S3C64XX_GPF1_CAMIF_HREF		(0x02 << 2)
-#define S3C64XX_GPF1_EINT_G4_1		(0x03 << 2)
-
-#define S3C64XX_GPF2_CAMIF_PCLK		(0x02 << 4)
-#define S3C64XX_GPF2_EINT_G4_2		(0x03 << 4)
-
-#define S3C64XX_GPF3_CAMIF_nRST		(0x02 << 6)
-#define S3C64XX_GPF3_EINT_G4_3		(0x03 << 6)
-
-#define S3C64XX_GPF4_CAMIF_VSYNC	(0x02 << 8)
-#define S3C64XX_GPF4_EINT_G4_4		(0x03 << 8)
-
-#define S3C64XX_GPF5_CAMIF_YDATA0	(0x02 << 10)
-#define S3C64XX_GPF5_EINT_G4_5		(0x03 << 10)
-
-#define S3C64XX_GPF6_CAMIF_YDATA1	(0x02 << 12)
-#define S3C64XX_GPF6_EINT_G4_6		(0x03 << 12)
-
-#define S3C64XX_GPF7_CAMIF_YDATA2	(0x02 << 14)
-#define S3C64XX_GPF7_EINT_G4_7		(0x03 << 14)
-
-#define S3C64XX_GPF8_CAMIF_YDATA3	(0x02 << 16)
-#define S3C64XX_GPF8_EINT_G4_8		(0x03 << 16)
-
-#define S3C64XX_GPF9_CAMIF_YDATA4	(0x02 << 18)
-#define S3C64XX_GPF9_EINT_G4_9		(0x03 << 18)
-
-#define S3C64XX_GPF10_CAMIF_YDATA5	(0x02 << 20)
-#define S3C64XX_GPF10_EINT_G4_10	(0x03 << 20)
-
-#define S3C64XX_GPF11_CAMIF_YDATA6	(0x02 << 22)
-#define S3C64XX_GPF11_EINT_G4_11	(0x03 << 22)
-
-#define S3C64XX_GPF12_CAMIF_YDATA7	(0x02 << 24)
-#define S3C64XX_GPF12_EINT_G4_12	(0x03 << 24)
-
-#define S3C64XX_GPF13_PWM_ECLK		(0x02 << 26)
-#define S3C64XX_GPF13_EINT_G4_13	(0x03 << 26)
-
-#define S3C64XX_GPF14_PWM_TOUT0		(0x02 << 28)
-#define S3C64XX_GPF14_CLKOUT0		(0x03 << 28)
-
-#define S3C64XX_GPF15_PWM_TOUT1		(0x02 << 30)
-
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h
deleted file mode 100644
index b94954a..0000000
--- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * 	Ben Dooks <ben@simtec.co.uk>
- * 	http://armlinux.simtec.co.uk/
- *
- * GPIO Bank G register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPGCON			(S3C64XX_GPG_BASE + 0x00)
-#define S3C64XX_GPGDAT			(S3C64XX_GPG_BASE + 0x04)
-#define S3C64XX_GPGPUD			(S3C64XX_GPG_BASE + 0x08)
-#define S3C64XX_GPGCONSLP		(S3C64XX_GPG_BASE + 0x0c)
-#define S3C64XX_GPGPUDSLP		(S3C64XX_GPG_BASE + 0x10)
-
-#define S3C64XX_GPG_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
-#define S3C64XX_GPG_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
-#define S3C64XX_GPG_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
-
-#define S3C64XX_GPG0_MMC0_CLK		(0x02 << 0)
-#define S3C64XX_GPG0_EINT_G5_0		(0x07 << 0)
-
-#define S3C64XX_GPG1_MMC0_CMD		(0x02 << 4)
-#define S3C64XX_GPG1_EINT_G5_1		(0x07 << 4)
-
-#define S3C64XX_GPG2_MMC0_DATA0		(0x02 << 8)
-#define S3C64XX_GPG2_EINT_G5_2		(0x07 << 8)
-
-#define S3C64XX_GPG3_MMC0_DATA1		(0x02 << 12)
-#define S3C64XX_GPG3_EINT_G5_3		(0x07 << 12)
-
-#define S3C64XX_GPG4_MMC0_DATA2		(0x02 << 16)
-#define S3C64XX_GPG4_EINT_G5_4		(0x07 << 16)
-
-#define S3C64XX_GPG5_MMC0_DATA3		(0x02 << 20)
-#define S3C64XX_GPG5_EINT_G5_5		(0x07 << 20)
-
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h
deleted file mode 100644
index 5d75aaa..0000000
--- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * 	Ben Dooks <ben@simtec.co.uk>
- * 	http://armlinux.simtec.co.uk/
- *
- * GPIO Bank H register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPHCON0			(S3C64XX_GPH_BASE + 0x00)
-#define S3C64XX_GPHCON1			(S3C64XX_GPH_BASE + 0x04)
-#define S3C64XX_GPHDAT			(S3C64XX_GPH_BASE + 0x08)
-#define S3C64XX_GPHPUD			(S3C64XX_GPH_BASE + 0x0c)
-#define S3C64XX_GPHCONSLP		(S3C64XX_GPH_BASE + 0x10)
-#define S3C64XX_GPHPUDSLP		(S3C64XX_GPH_BASE + 0x14)
-
-#define S3C64XX_GPH_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
-#define S3C64XX_GPH_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
-#define S3C64XX_GPH_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
-
-#define S3C64XX_GPH0_MMC1_CLK		(0x02 << 0)
-#define S3C64XX_GPH0_KP_COL0		(0x04 << 0)
-#define S3C64XX_GPH0_EINT_G6_0		(0x07 << 0)
-
-#define S3C64XX_GPH1_MMC1_CMD		(0x02 << 4)
-#define S3C64XX_GPH1_KP_COL1		(0x04 << 4)
-#define S3C64XX_GPH1_EINT_G6_1		(0x07 << 4)
-
-#define S3C64XX_GPH2_MMC1_DATA0		(0x02 << 8)
-#define S3C64XX_GPH2_KP_COL2		(0x04 << 8)
-#define S3C64XX_GPH2_EINT_G6_2		(0x07 << 8)
-
-#define S3C64XX_GPH3_MMC1_DATA1		(0x02 << 12)
-#define S3C64XX_GPH3_KP_COL3		(0x04 << 12)
-#define S3C64XX_GPH3_EINT_G6_3		(0x07 << 12)
-
-#define S3C64XX_GPH4_MMC1_DATA2		(0x02 << 16)
-#define S3C64XX_GPH4_KP_COL4		(0x04 << 16)
-#define S3C64XX_GPH4_EINT_G6_4		(0x07 << 16)
-
-#define S3C64XX_GPH5_MMC1_DATA3		(0x02 << 20)
-#define S3C64XX_GPH5_KP_COL5		(0x04 << 20)
-#define S3C64XX_GPH5_EINT_G6_5		(0x07 << 20)
-
-#define S3C64XX_GPH6_MMC1_DATA4		(0x02 << 24)
-#define S3C64XX_GPH6_MMC2_DATA0		(0x03 << 24)
-#define S3C64XX_GPH6_KP_COL6		(0x04 << 24)
-#define S3C64XX_GPH6_I2S_V40_BCLK	(0x05 << 24)
-#define S3C64XX_GPH6_ADDR_CF0		(0x06 << 24)
-#define S3C64XX_GPH6_EINT_G6_6		(0x07 << 24)
-
-#define S3C64XX_GPH7_MMC1_DATA5		(0x02 << 28)
-#define S3C64XX_GPH7_MMC2_DATA1		(0x03 << 28)
-#define S3C64XX_GPH7_KP_COL7		(0x04 << 28)
-#define S3C64XX_GPH7_I2S_V40_CDCLK	(0x05 << 28)
-#define S3C64XX_GPH7_ADDR_CF1		(0x06 << 28)
-#define S3C64XX_GPH7_EINT_G6_7		(0x07 << 28)
-
-#define S3C64XX_GPH8_MMC1_DATA6		(0x02 <<  0)
-#define S3C64XX_GPH8_MMC2_DATA2		(0x03 <<  0)
-#define S3C64XX_GPH8_I2S_V40_LRCLK	(0x05 <<  0)
-#define S3C64XX_GPH8_ADDR_CF2		(0x06 <<  0)
-#define S3C64XX_GPH8_EINT_G6_8		(0x07 <<  0)
-
-#define S3C64XX_GPH9_OUTPUT		(0x01 <<  4)
-#define S3C64XX_GPH9_MMC1_DATA7		(0x02 <<  4)
-#define S3C64XX_GPH9_MMC2_DATA3		(0x03 <<  4)
-#define S3C64XX_GPH9_I2S_V40_DI		(0x05 <<  4)
-#define S3C64XX_GPH9_EINT_G6_9		(0x07 <<  4)
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h
deleted file mode 100644
index 4ceaa60..0000000
--- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * 	Ben Dooks <ben@simtec.co.uk>
- * 	http://armlinux.simtec.co.uk/
- *
- * GPIO Bank I register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPICON			(S3C64XX_GPI_BASE + 0x00)
-#define S3C64XX_GPIDAT			(S3C64XX_GPI_BASE + 0x04)
-#define S3C64XX_GPIPUD			(S3C64XX_GPI_BASE + 0x08)
-#define S3C64XX_GPICONSLP		(S3C64XX_GPI_BASE + 0x0c)
-#define S3C64XX_GPIPUDSLP		(S3C64XX_GPI_BASE + 0x10)
-
-#define S3C64XX_GPI_CONMASK(__gpio)	(0x3 << ((__gpio) * 2))
-#define S3C64XX_GPI_INPUT(__gpio)	(0x0 << ((__gpio) * 2))
-#define S3C64XX_GPI_OUTPUT(__gpio)	(0x1 << ((__gpio) * 2))
-
-#define S3C64XX_GPI0_VD0		(0x02 << 0)
-#define S3C64XX_GPI1_VD1		(0x02 << 2)
-#define S3C64XX_GPI2_VD2		(0x02 << 4)
-#define S3C64XX_GPI3_VD3		(0x02 << 6)
-#define S3C64XX_GPI4_VD4		(0x02 << 8)
-#define S3C64XX_GPI5_VD5		(0x02 << 10)
-#define S3C64XX_GPI6_VD6		(0x02 << 12)
-#define S3C64XX_GPI7_VD7		(0x02 << 14)
-#define S3C64XX_GPI8_VD8		(0x02 << 16)
-#define S3C64XX_GPI9_VD9		(0x02 << 18)
-#define S3C64XX_GPI10_VD10		(0x02 << 20)
-#define S3C64XX_GPI11_VD11		(0x02 << 22)
-#define S3C64XX_GPI12_VD12		(0x02 << 24)
-#define S3C64XX_GPI13_VD13		(0x02 << 26)
-#define S3C64XX_GPI14_VD14		(0x02 << 28)
-#define S3C64XX_GPI15_VD15		(0x02 << 30)
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h
deleted file mode 100644
index 6f25cd0..0000000
--- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * 	Ben Dooks <ben@simtec.co.uk>
- * 	http://armlinux.simtec.co.uk/
- *
- * GPIO Bank J register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPJCON			(S3C64XX_GPJ_BASE + 0x00)
-#define S3C64XX_GPJDAT			(S3C64XX_GPJ_BASE + 0x04)
-#define S3C64XX_GPJPUD			(S3C64XX_GPJ_BASE + 0x08)
-#define S3C64XX_GPJCONSLP		(S3C64XX_GPJ_BASE + 0x0c)
-#define S3C64XX_GPJPUDSLP		(S3C64XX_GPJ_BASE + 0x10)
-
-#define S3C64XX_GPJ_CONMASK(__gpio)	(0x3 << ((__gpio) * 2))
-#define S3C64XX_GPJ_INPUT(__gpio)	(0x0 << ((__gpio) * 2))
-#define S3C64XX_GPJ_OUTPUT(__gpio)	(0x1 << ((__gpio) * 2))
-
-#define S3C64XX_GPJ0_VD16		(0x02 << 0)
-#define S3C64XX_GPJ1_VD17		(0x02 << 2)
-#define S3C64XX_GPJ2_VD18		(0x02 << 4)
-#define S3C64XX_GPJ3_VD19		(0x02 << 6)
-#define S3C64XX_GPJ4_VD20		(0x02 << 8)
-#define S3C64XX_GPJ5_VD21		(0x02 << 10)
-#define S3C64XX_GPJ6_VD22		(0x02 << 12)
-#define S3C64XX_GPJ7_VD23		(0x02 << 14)
-#define S3C64XX_GPJ8_LCD_HSYNC		(0x02 << 16)
-#define S3C64XX_GPJ9_LCD_VSYNC		(0x02 << 18)
-#define S3C64XX_GPJ10_LCD_VDEN		(0x02 << 20)
-#define S3C64XX_GPJ11_LCD_VCLK		(0x02 << 22)
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h
deleted file mode 100644
index d0aeda1..0000000
--- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * 	Ben Dooks <ben@simtec.co.uk>
- * 	http://armlinux.simtec.co.uk/
- *
- * GPIO Bank N register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPNCON			(S3C64XX_GPN_BASE + 0x00)
-#define S3C64XX_GPNDAT			(S3C64XX_GPN_BASE + 0x04)
-#define S3C64XX_GPNPUD			(S3C64XX_GPN_BASE + 0x08)
-
-#define S3C64XX_GPN_CONMASK(__gpio)	(0x3 << ((__gpio) * 2))
-#define S3C64XX_GPN_INPUT(__gpio)	(0x0 << ((__gpio) * 2))
-#define S3C64XX_GPN_OUTPUT(__gpio)	(0x1 << ((__gpio) * 2))
-
-#define S3C64XX_GPN0_EINT0		(0x02 << 0)
-#define S3C64XX_GPN0_KP_ROW0		(0x03 << 0)
-
-#define S3C64XX_GPN1_EINT1		(0x02 << 2)
-#define S3C64XX_GPN1_KP_ROW1		(0x03 << 2)
-
-#define S3C64XX_GPN2_EINT2		(0x02 << 4)
-#define S3C64XX_GPN2_KP_ROW2		(0x03 << 4)
-
-#define S3C64XX_GPN3_EINT3		(0x02 << 6)
-#define S3C64XX_GPN3_KP_ROW3		(0x03 << 6)
-
-#define S3C64XX_GPN4_EINT4		(0x02 << 8)
-#define S3C64XX_GPN4_KP_ROW4		(0x03 << 8)
-
-#define S3C64XX_GPN5_EINT5		(0x02 << 10)
-#define S3C64XX_GPN5_KP_ROW5		(0x03 << 10)
-
-#define S3C64XX_GPN6_EINT6		(0x02 << 12)
-#define S3C64XX_GPN6_KP_ROW6		(0x03 << 12)
-
-#define S3C64XX_GPN7_EINT7		(0x02 << 14)
-#define S3C64XX_GPN7_KP_ROW7		(0x03 << 14)
-
-#define S3C64XX_GPN8_EINT8		(0x02 << 16)
-#define S3C64XX_GPN9_EINT9		(0x02 << 18)
-#define S3C64XX_GPN10_EINT10		(0x02 << 20)
-#define S3C64XX_GPN11_EINT11		(0x02 << 22)
-#define S3C64XX_GPN12_EINT12		(0x02 << 24)
-#define S3C64XX_GPN13_EINT13		(0x02 << 26)
-#define S3C64XX_GPN14_EINT14		(0x02 << 28)
-#define S3C64XX_GPN15_EINT15		(0x02 << 30)
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h
deleted file mode 100644
index 21868fa..0000000
--- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * 	Ben Dooks <ben@simtec.co.uk>
- * 	http://armlinux.simtec.co.uk/
- *
- * GPIO Bank O register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPOCON			(S3C64XX_GPO_BASE + 0x00)
-#define S3C64XX_GPODAT			(S3C64XX_GPO_BASE + 0x04)
-#define S3C64XX_GPOPUD			(S3C64XX_GPO_BASE + 0x08)
-#define S3C64XX_GPOCONSLP		(S3C64XX_GPO_BASE + 0x0c)
-#define S3C64XX_GPOPUDSLP		(S3C64XX_GPO_BASE + 0x10)
-
-#define S3C64XX_GPO_CONMASK(__gpio)	(0x3 << ((__gpio) * 2))
-#define S3C64XX_GPO_INPUT(__gpio)	(0x0 << ((__gpio) * 2))
-#define S3C64XX_GPO_OUTPUT(__gpio)	(0x1 << ((__gpio) * 2))
-
-#define S3C64XX_GPO0_MEM0_nCS2		(0x02 << 0)
-#define S3C64XX_GPO0_EINT_G7_0		(0x03 << 0)
-
-#define S3C64XX_GPO1_MEM0_nCS3		(0x02 << 2)
-#define S3C64XX_GPO1_EINT_G7_1		(0x03 << 2)
-
-#define S3C64XX_GPO2_MEM0_nCS4		(0x02 << 4)
-#define S3C64XX_GPO2_EINT_G7_2		(0x03 << 4)
-
-#define S3C64XX_GPO3_MEM0_nCS5		(0x02 << 6)
-#define S3C64XX_GPO3_EINT_G7_3		(0x03 << 6)
-
-#define S3C64XX_GPO4_EINT_G7_4		(0x03 << 8)
-
-#define S3C64XX_GPO5_EINT_G7_5		(0x03 << 10)
-
-#define S3C64XX_GPO6_MEM0_ADDR6		(0x02 << 12)
-#define S3C64XX_GPO6_EINT_G7_6		(0x03 << 12)
-
-#define S3C64XX_GPO7_MEM0_ADDR7		(0x02 << 14)
-#define S3C64XX_GPO7_EINT_G7_7		(0x03 << 14)
-
-#define S3C64XX_GPO8_MEM0_ADDR8		(0x02 << 16)
-#define S3C64XX_GPO8_EINT_G7_8		(0x03 << 16)
-
-#define S3C64XX_GPO9_MEM0_ADDR9		(0x02 << 18)
-#define S3C64XX_GPO9_EINT_G7_9		(0x03 << 18)
-
-#define S3C64XX_GPO10_MEM0_ADDR10	(0x02 << 20)
-#define S3C64XX_GPO10_EINT_G7_10	(0x03 << 20)
-
-#define S3C64XX_GPO11_MEM0_ADDR11	(0x02 << 22)
-#define S3C64XX_GPO11_EINT_G7_11	(0x03 << 22)
-
-#define S3C64XX_GPO12_MEM0_ADDR12	(0x02 << 24)
-#define S3C64XX_GPO12_EINT_G7_12	(0x03 << 24)
-
-#define S3C64XX_GPO13_MEM0_ADDR13	(0x02 << 26)
-#define S3C64XX_GPO13_EINT_G7_13	(0x03 << 26)
-
-#define S3C64XX_GPO14_MEM0_ADDR14	(0x02 << 28)
-#define S3C64XX_GPO14_EINT_G7_14	(0x03 << 28)
-
-#define S3C64XX_GPO15_MEM0_ADDR15	(0x02 << 30)
-#define S3C64XX_GPO15_EINT_G7_15	(0x03 << 30)
-
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h
deleted file mode 100644
index 46bcfb6..0000000
--- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * 	Ben Dooks <ben@simtec.co.uk>
- * 	http://armlinux.simtec.co.uk/
- *
- * GPIO Bank P register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPPCON			(S3C64XX_GPP_BASE + 0x00)
-#define S3C64XX_GPPDAT			(S3C64XX_GPP_BASE + 0x04)
-#define S3C64XX_GPPPUD			(S3C64XX_GPP_BASE + 0x08)
-#define S3C64XX_GPPCONSLP		(S3C64XX_GPP_BASE + 0x0c)
-#define S3C64XX_GPPPUDSLP		(S3C64XX_GPP_BASE + 0x10)
-
-#define S3C64XX_GPP_CONMASK(__gpio)	(0x3 << ((__gpio) * 2))
-#define S3C64XX_GPP_INPUT(__gpio)	(0x0 << ((__gpio) * 2))
-#define S3C64XX_GPP_OUTPUT(__gpio)	(0x1 << ((__gpio) * 2))
-
-#define S3C64XX_GPP0_MEM0_ADDRV		(0x02 << 0)
-#define S3C64XX_GPP0_EINT_G8_0		(0x03 << 0)
-
-#define S3C64XX_GPP1_MEM0_SMCLK		(0x02 << 2)
-#define S3C64XX_GPP1_EINT_G8_1		(0x03 << 2)
-
-#define S3C64XX_GPP2_MEM0_nWAIT		(0x02 << 4)
-#define S3C64XX_GPP2_EINT_G8_2		(0x03 << 4)
-
-#define S3C64XX_GPP3_MEM0_RDY0_ALE	(0x02 << 6)
-#define S3C64XX_GPP3_EINT_G8_3		(0x03 << 6)
-
-#define S3C64XX_GPP4_MEM0_RDY1_CLE	(0x02 << 8)
-#define S3C64XX_GPP4_EINT_G8_4		(0x03 << 8)
-
-#define S3C64XX_GPP5_MEM0_INTsm0_FWE	(0x02 << 10)
-#define S3C64XX_GPP5_EINT_G8_5		(0x03 << 10)
-
-#define S3C64XX_GPP6_MEM0_(null)	(0x02 << 12)
-#define S3C64XX_GPP6_EINT_G8_6		(0x03 << 12)
-
-#define S3C64XX_GPP7_MEM0_INTsm1_FRE	(0x02 << 14)
-#define S3C64XX_GPP7_EINT_G8_7		(0x03 << 14)
-
-#define S3C64XX_GPP8_MEM0_RPn_RnB	(0x02 << 16)
-#define S3C64XX_GPP8_EINT_G8_8		(0x03 << 16)
-
-#define S3C64XX_GPP9_MEM0_ATA_RESET	(0x02 << 18)
-#define S3C64XX_GPP9_EINT_G8_9		(0x03 << 18)
-
-#define S3C64XX_GPP10_MEM0_ATA_INPACK	(0x02 << 20)
-#define S3C64XX_GPP10_EINT_G8_10	(0x03 << 20)
-
-#define S3C64XX_GPP11_MEM0_ATA_REG	(0x02 << 22)
-#define S3C64XX_GPP11_EINT_G8_11	(0x03 << 22)
-
-#define S3C64XX_GPP12_MEM0_ATA_WE	(0x02 << 24)
-#define S3C64XX_GPP12_EINT_G8_12	(0x03 << 24)
-
-#define S3C64XX_GPP13_MEM0_ATA_OE	(0x02 << 26)
-#define S3C64XX_GPP13_EINT_G8_13	(0x03 << 26)
-
-#define S3C64XX_GPP14_MEM0_ATA_CD	(0x02 << 28)
-#define S3C64XX_GPP14_EINT_G8_14	(0x03 << 28)
-
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h
deleted file mode 100644
index 1712223..0000000
--- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * 	Ben Dooks <ben@simtec.co.uk>
- * 	http://armlinux.simtec.co.uk/
- *
- * GPIO Bank Q register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPQCON			(S3C64XX_GPQ_BASE + 0x00)
-#define S3C64XX_GPQDAT			(S3C64XX_GPQ_BASE + 0x04)
-#define S3C64XX_GPQPUD			(S3C64XX_GPQ_BASE + 0x08)
-#define S3C64XX_GPQCONSLP		(S3C64XX_GPQ_BASE + 0x0c)
-#define S3C64XX_GPQPUDSLP		(S3C64XX_GPQ_BASE + 0x10)
-
-#define S3C64XX_GPQ_CONMASK(__gpio)	(0x3 << ((__gpio) * 2))
-#define S3C64XX_GPQ_INPUT(__gpio)	(0x0 << ((__gpio) * 2))
-#define S3C64XX_GPQ_OUTPUT(__gpio)	(0x1 << ((__gpio) * 2))
-
-#define S3C64XX_GPQ0_MEM0_ADDR18_RAS	(0x02 << 0)
-#define S3C64XX_GPQ0_EINT_G9_0		(0x03 << 0)
-
-#define S3C64XX_GPQ1_MEM0_ADDR19_CAS	(0x02 << 2)
-#define S3C64XX_GPQ1_EINT_G9_1		(0x03 << 2)
-
-#define S3C64XX_GPQ2_EINT_G9_2		(0x03 << 4)
-
-#define S3C64XX_GPQ3_EINT_G9_3		(0x03 << 6)
-
-#define S3C64XX_GPQ4_EINT_G9_4		(0x03 << 8)
-
-#define S3C64XX_GPQ5_EINT_G9_5		(0x03 << 10)
-
-#define S3C64XX_GPQ6_EINT_G9_6		(0x03 << 12)
-
-#define S3C64XX_GPQ7_MEM0_ADDR17_WENDMC	(0x02 << 14)
-#define S3C64XX_GPQ7_EINT_G9_7		(0x03 << 14)
-
-#define S3C64XX_GPQ8_MEM0_ADDR16_APDMC	(0x02 << 16)
-#define S3C64XX_GPQ8_EINT_G9_8		(0x03 << 16)
-
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index 686a4f2..2c0353a 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -50,7 +50,6 @@
 #include <mach/hardware.h>
 #include <mach/regs-fb.h>
 #include <mach/map.h>
-#include <mach/gpio-bank-f.h>
 
 #include <asm/irq.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c
index 79412f7..bc1c470 100644
--- a/arch/arm/mach-s3c64xx/pm.c
+++ b/arch/arm/mach-s3c64xx/pm.c
@@ -30,26 +30,18 @@
 #include <mach/regs-gpio-memport.h>
 
 #ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
-#include <mach/gpio-bank-n.h>
-
 void s3c_pm_debug_smdkled(u32 set, u32 clear)
 {
 	unsigned long flags;
-	u32 reg;
+	int i;
 
 	local_irq_save(flags);
-	reg = __raw_readl(S3C64XX_GPNCON);
-	reg &= ~(S3C64XX_GPN_CONMASK(12) | S3C64XX_GPN_CONMASK(13) |
-		 S3C64XX_GPN_CONMASK(14) | S3C64XX_GPN_CONMASK(15));
-	reg |= S3C64XX_GPN_OUTPUT(12) | S3C64XX_GPN_OUTPUT(13) |
-	       S3C64XX_GPN_OUTPUT(14) | S3C64XX_GPN_OUTPUT(15);
-	__raw_writel(reg, S3C64XX_GPNCON);
-
-	reg = __raw_readl(S3C64XX_GPNDAT);
-	reg &= ~(clear << 12);
-	reg |= set << 12;
-	__raw_writel(reg, S3C64XX_GPNDAT);
-
+	for (i = 0; i < 4; i++) {
+		if (clear & (1 << i))
+			gpio_set_value(S3C64XX_GPN(12 + i), 0);
+		if (set & (1 << i))
+			gpio_set_value(S3C64XX_GPN(12 + i), 1);
+	}
 	local_irq_restore(flags);
 }
 #endif
@@ -187,6 +179,18 @@ static int s3c64xx_pm_init(void)
 	pm_cpu_prep = s3c64xx_pm_prepare;
 	pm_cpu_sleep = s3c64xx_cpu_suspend;
 	pm_uart_udivslot = 1;
+
+#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
+	gpio_request(S3C64XX_GPN(12), "DEBUG_LED0");
+	gpio_request(S3C64XX_GPN(13), "DEBUG_LED1");
+	gpio_request(S3C64XX_GPN(14), "DEBUG_LED2");
+	gpio_request(S3C64XX_GPN(15), "DEBUG_LED3");
+	gpio_direction_output(S3C64XX_GPN(12), 0);
+	gpio_direction_output(S3C64XX_GPN(13), 0);
+	gpio_direction_output(S3C64XX_GPN(14), 0);
+	gpio_direction_output(S3C64XX_GPN(15), 0);
+#endif
+
 	return 0;
 }
 
diff --git a/arch/arm/mach-s3c64xx/setup-i2c0.c b/arch/arm/mach-s3c64xx/setup-i2c0.c
index 406192a..241af94 100644
--- a/arch/arm/mach-s3c64xx/setup-i2c0.c
+++ b/arch/arm/mach-s3c64xx/setup-i2c0.c
@@ -18,14 +18,11 @@
 
 struct platform_device; /* don't need the contents */
 
-#include <mach/gpio-bank-b.h>
 #include <plat/iic.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c0_cfg_gpio(struct platform_device *dev)
 {
-	s3c_gpio_cfgpin(S3C64XX_GPB(5), S3C64XX_GPB5_I2C_SCL0);
-	s3c_gpio_cfgpin(S3C64XX_GPB(6), S3C64XX_GPB6_I2C_SDA0);
-	s3c_gpio_setpull(S3C64XX_GPB(5), S3C_GPIO_PULL_UP);
-	s3c_gpio_setpull(S3C64XX_GPB(6), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgall_range(S3C64XX_GPB(5), 2,
+			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
 }
diff --git a/arch/arm/mach-s3c64xx/setup-i2c1.c b/arch/arm/mach-s3c64xx/setup-i2c1.c
index 1ee62c9..3d13a96 100644
--- a/arch/arm/mach-s3c64xx/setup-i2c1.c
+++ b/arch/arm/mach-s3c64xx/setup-i2c1.c
@@ -18,14 +18,11 @@
 
 struct platform_device; /* don't need the contents */
 
-#include <mach/gpio-bank-b.h>
 #include <plat/iic.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c1_cfg_gpio(struct platform_device *dev)
 {
-	s3c_gpio_cfgpin(S3C64XX_GPB(2), S3C64XX_GPB2_I2C_SCL1);
-	s3c_gpio_cfgpin(S3C64XX_GPB(3), S3C64XX_GPB3_I2C_SDA1);
-	s3c_gpio_setpull(S3C64XX_GPB(2), S3C_GPIO_PULL_UP);
-	s3c_gpio_setpull(S3C64XX_GPB(3), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgall_range(S3C64XX_GPB(2), 2,
+			      S3C_GPIO_SFN(6), S3C_GPIO_PULL_UP);
 }
diff --git a/arch/arm/mach-s3c64xx/sleep.S b/arch/arm/mach-s3c64xx/sleep.S
index afe5a76..1f87732 100644
--- a/arch/arm/mach-s3c64xx/sleep.S
+++ b/arch/arm/mach-s3c64xx/sleep.S
@@ -20,7 +20,6 @@
 #define S3C64XX_VA_GPIO (0x0)
 
 #include <mach/regs-gpio.h>
-#include <mach/gpio-bank-n.h>
 
 #define LL_UART (S3C_PA_UART + (0x400 * CONFIG_S3C_LOWLEVEL_UART_PORT))
 
@@ -68,6 +67,13 @@ ENTRY(s3c_cpu_resume)
 	ldr	r2, =LL_UART		/* for debug */
 
 #ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
+
+#define S3C64XX_GPNCON			(S3C64XX_GPN_BASE + 0x00)
+#define S3C64XX_GPNDAT			(S3C64XX_GPN_BASE + 0x04)
+
+#define S3C64XX_GPN_CONMASK(__gpio)	(0x3 << ((__gpio) * 2))
+#define S3C64XX_GPN_OUTPUT(__gpio)	(0x1 << ((__gpio) * 2))
+
 	/* Initialise the GPIO state if we are debugging via the SMDK LEDs,
 	 * as the uboot version supplied resets these to inputs during the
 	 * resume checks.
diff --git a/arch/arm/mach-s5p6442/Kconfig b/arch/arm/mach-s5p6442/Kconfig
deleted file mode 100644
index 33569e4..0000000
--- a/arch/arm/mach-s5p6442/Kconfig
+++ /dev/null
@@ -1,25 +0,0 @@
-# arch/arm/mach-s5p6442/Kconfig
-#
-# Copyright (c) 2010 Samsung Electronics Co., Ltd.
-#		http://www.samsung.com/
-#
-# Licensed under GPLv2
-
-# Configuration options for the S5P6442
-
-if ARCH_S5P6442
-
-config CPU_S5P6442
-	bool
-	select S3C_PL330_DMA
-	help
-	  Enable S5P6442 CPU support
-
-config MACH_SMDK6442
-	bool "SMDK6442"
-	select CPU_S5P6442
-	select S3C_DEV_WDT
-	help
-	  Machine support for Samsung SMDK6442
-
-endif
diff --git a/arch/arm/mach-s5p6442/Makefile b/arch/arm/mach-s5p6442/Makefile
deleted file mode 100644
index 90a3d83..0000000
--- a/arch/arm/mach-s5p6442/Makefile
+++ /dev/null
@@ -1,24 +0,0 @@
-# arch/arm/mach-s5p6442/Makefile
-#
-# Copyright (c) 2010 Samsung Electronics Co., Ltd.
-# 		http://www.samsung.com/
-#
-# Licensed under GPLv2
-
-obj-y				:=
-obj-m				:=
-obj-n				:=
-obj-				:=
-
-# Core support for S5P6442 system
-
-obj-$(CONFIG_CPU_S5P6442)	+= cpu.o init.o clock.o dma.o
-obj-$(CONFIG_CPU_S5P6442)	+= setup-i2c0.o
-
-# machine support
-
-obj-$(CONFIG_MACH_SMDK6442)	+= mach-smdk6442.o
-
-# device support
-obj-y				+= dev-audio.o
-obj-$(CONFIG_S3C64XX_DEV_SPI)	+= dev-spi.o
diff --git a/arch/arm/mach-s5p6442/Makefile.boot b/arch/arm/mach-s5p6442/Makefile.boot
deleted file mode 100644
index ff90aa1..0000000
--- a/arch/arm/mach-s5p6442/Makefile.boot
+++ /dev/null
@@ -1,2 +0,0 @@
-   zreladdr-y	:= 0x20008000
-params_phys-y	:= 0x20000100
diff --git a/arch/arm/mach-s5p6442/clock.c b/arch/arm/mach-s5p6442/clock.c
deleted file mode 100644
index fbbc7be..0000000
--- a/arch/arm/mach-s5p6442/clock.c
+++ /dev/null
@@ -1,420 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/clock.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P6442 - Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/map.h>
-
-#include <plat/cpu-freq.h>
-#include <mach/regs-clock.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/s5p-clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/s5p6442.h>
-
-static struct clksrc_clk clk_mout_apll = {
-	.clk	= {
-		.name		= "mout_apll",
-		.id		= -1,
-	},
-	.sources	= &clk_src_apll,
-	.reg_src	= { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 },
-};
-
-static struct clksrc_clk clk_mout_mpll = {
-	.clk = {
-		.name		= "mout_mpll",
-		.id		= -1,
-	},
-	.sources	= &clk_src_mpll,
-	.reg_src	= { .reg = S5P_CLK_SRC0, .shift = 4, .size = 1 },
-};
-
-static struct clksrc_clk clk_mout_epll = {
-	.clk	= {
-		.name		= "mout_epll",
-		.id		= -1,
-	},
-	.sources	= &clk_src_epll,
-	.reg_src	= { .reg = S5P_CLK_SRC0, .shift = 8, .size = 1 },
-};
-
-/* Possible clock sources for ARM Mux */
-static struct clk *clk_src_arm_list[] = {
-	[1] = &clk_mout_apll.clk,
-	[2] = &clk_mout_mpll.clk,
-};
-
-static struct clksrc_sources clk_src_arm = {
-	.sources	= clk_src_arm_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_arm_list),
-};
-
-static struct clksrc_clk clk_mout_arm = {
-	.clk	= {
-		.name		= "mout_arm",
-		.id		= -1,
-	},
-	.sources	= &clk_src_arm,
-	.reg_src	= { .reg = S5P_CLK_MUX_STAT0, .shift = 16, .size = 3 },
-};
-
-static struct clk clk_dout_a2m = {
-	.name		= "dout_a2m",
-	.id		= -1,
-	.parent		= &clk_mout_apll.clk,
-};
-
-/* Possible clock sources for D0 Mux */
-static struct clk *clk_src_d0_list[] = {
-	[1] = &clk_mout_mpll.clk,
-	[2] = &clk_dout_a2m,
-};
-
-static struct clksrc_sources clk_src_d0 = {
-	.sources	= clk_src_d0_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_d0_list),
-};
-
-static struct clksrc_clk clk_mout_d0 = {
-	.clk = {
-		.name		= "mout_d0",
-		.id		= -1,
-	},
-	.sources	= &clk_src_d0,
-	.reg_src	= { .reg = S5P_CLK_MUX_STAT0, .shift = 20, .size = 3 },
-};
-
-static struct clk clk_dout_apll = {
-	.name		= "dout_apll",
-	.id		= -1,
-	.parent		= &clk_mout_arm.clk,
-};
-
-/* Possible clock sources for D0SYNC Mux */
-static struct clk *clk_src_d0sync_list[] = {
-	[1] = &clk_mout_d0.clk,
-	[2] = &clk_dout_apll,
-};
-
-static struct clksrc_sources clk_src_d0sync = {
-	.sources	= clk_src_d0sync_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_d0sync_list),
-};
-
-static struct clksrc_clk clk_mout_d0sync = {
-	.clk	= {
-		.name		= "mout_d0sync",
-		.id		= -1,
-	},
-	.sources	= &clk_src_d0sync,
-	.reg_src	= { .reg = S5P_CLK_MUX_STAT1, .shift = 28, .size = 3 },
-};
-
-/* Possible clock sources for D1 Mux */
-static struct clk *clk_src_d1_list[] = {
-	[1] = &clk_mout_mpll.clk,
-	[2] = &clk_dout_a2m,
-};
-
-static struct clksrc_sources clk_src_d1 = {
-	.sources	= clk_src_d1_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_d1_list),
-};
-
-static struct clksrc_clk clk_mout_d1 = {
-	.clk	= {
-		.name		= "mout_d1",
-		.id		= -1,
-	},
-	.sources	= &clk_src_d1,
-	.reg_src	= { .reg = S5P_CLK_MUX_STAT0, .shift = 24, .size = 3 },
-};
-
-/* Possible clock sources for D1SYNC Mux */
-static struct clk *clk_src_d1sync_list[] = {
-	[1] = &clk_mout_d1.clk,
-	[2] = &clk_dout_apll,
-};
-
-static struct clksrc_sources clk_src_d1sync = {
-	.sources	= clk_src_d1sync_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_d1sync_list),
-};
-
-static struct clksrc_clk clk_mout_d1sync = {
-	.clk	= {
-		.name		= "mout_d1sync",
-		.id		= -1,
-	},
-	.sources	= &clk_src_d1sync,
-	.reg_src	= { .reg = S5P_CLK_MUX_STAT1, .shift = 24, .size = 3 },
-};
-
-static struct clk clk_hclkd0 = {
-	.name		= "hclkd0",
-	.id		= -1,
-	.parent		= &clk_mout_d0sync.clk,
-};
-
-static struct clk clk_hclkd1 = {
-	.name		= "hclkd1",
-	.id		= -1,
-	.parent		= &clk_mout_d1sync.clk,
-};
-
-static struct clk clk_pclkd0 = {
-	.name		= "pclkd0",
-	.id		= -1,
-	.parent		= &clk_hclkd0,
-};
-
-static struct clk clk_pclkd1 = {
-	.name		= "pclkd1",
-	.id		= -1,
-	.parent		= &clk_hclkd1,
-};
-
-int s5p6442_clk_ip0_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLKGATE_IP0, clk, enable);
-}
-
-int s5p6442_clk_ip3_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLKGATE_IP3, clk, enable);
-}
-
-static struct clksrc_clk clksrcs[] = {
-	{
-		.clk	= {
-			.name		= "dout_a2m",
-			.id		= -1,
-			.parent		= &clk_mout_apll.clk,
-		},
-		.sources = &clk_src_apll,
-		.reg_src = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 },
-		.reg_div = { .reg = S5P_CLK_DIV0, .shift = 4, .size = 3 },
-	}, {
-		.clk	= {
-			.name		= "dout_apll",
-			.id		= -1,
-			.parent		= &clk_mout_arm.clk,
-		},
-		.sources = &clk_src_arm,
-		.reg_src = { .reg = S5P_CLK_MUX_STAT0, .shift = 16, .size = 3 },
-		.reg_div = { .reg = S5P_CLK_DIV0, .shift = 0, .size = 3 },
-	}, {
-		.clk	= {
-			.name		= "hclkd1",
-			.id		= -1,
-			.parent		= &clk_mout_d1sync.clk,
-		},
-		.sources = &clk_src_d1sync,
-		.reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 24, .size = 3 },
-		.reg_div = { .reg = S5P_CLK_DIV0, .shift = 24, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "hclkd0",
-			.id		= -1,
-			.parent		= &clk_mout_d0sync.clk,
-		},
-		.sources = &clk_src_d0sync,
-		.reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 28, .size = 3 },
-		.reg_div = { .reg = S5P_CLK_DIV0, .shift = 16, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "pclkd0",
-			.id		= -1,
-			.parent		= &clk_hclkd0,
-		},
-		.sources = &clk_src_d0sync,
-		.reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 28, .size = 3 },
-		.reg_div = { .reg = S5P_CLK_DIV0, .shift = 20, .size = 3 },
-	}, {
-		.clk	= {
-			.name		= "pclkd1",
-			.id		= -1,
-			.parent		= &clk_hclkd1,
-		},
-		.sources = &clk_src_d1sync,
-		.reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 24, .size = 3 },
-		.reg_div = { .reg = S5P_CLK_DIV0, .shift = 28, .size = 3 },
-	}
-};
-
-/* Clock initialisation code */
-static struct clksrc_clk *init_parents[] = {
-	&clk_mout_apll,
-	&clk_mout_mpll,
-	&clk_mout_epll,
-	&clk_mout_arm,
-	&clk_mout_d0,
-	&clk_mout_d0sync,
-	&clk_mout_d1,
-	&clk_mout_d1sync,
-};
-
-void __init_or_cpufreq s5p6442_setup_clocks(void)
-{
-	struct clk *pclkd0_clk;
-	struct clk *pclkd1_clk;
-
-	unsigned long xtal;
-	unsigned long arm;
-	unsigned long hclkd0 = 0;
-	unsigned long hclkd1 = 0;
-	unsigned long pclkd0 = 0;
-	unsigned long pclkd1 = 0;
-
-	unsigned long apll;
-	unsigned long mpll;
-	unsigned long epll;
-	unsigned int ptr;
-
-	printk(KERN_DEBUG "%s: registering clocks\n", __func__);
-
-	xtal = clk_get_rate(&clk_xtal);
-
-	printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
-
-	apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4508);
-	mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON), pll_4502);
-	epll = s5p_get_pll45xx(xtal, __raw_readl(S5P_EPLL_CON), pll_4500);
-
-	printk(KERN_INFO "S5P6442: PLL settings, A=%ld, M=%ld, E=%ld",
-			apll, mpll, epll);
-
-	clk_fout_apll.rate = apll;
-	clk_fout_mpll.rate = mpll;
-	clk_fout_epll.rate = epll;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
-		s3c_set_clksrc(init_parents[ptr], true);
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
-		s3c_set_clksrc(&clksrcs[ptr], true);
-
-	arm = clk_get_rate(&clk_dout_apll);
-	hclkd0 = clk_get_rate(&clk_hclkd0);
-	hclkd1 = clk_get_rate(&clk_hclkd1);
-
-	pclkd0_clk = clk_get(NULL, "pclkd0");
-	BUG_ON(IS_ERR(pclkd0_clk));
-
-	pclkd0 = clk_get_rate(pclkd0_clk);
-	clk_put(pclkd0_clk);
-
-	pclkd1_clk = clk_get(NULL, "pclkd1");
-	BUG_ON(IS_ERR(pclkd1_clk));
-
-	pclkd1 = clk_get_rate(pclkd1_clk);
-	clk_put(pclkd1_clk);
-
-	printk(KERN_INFO "S5P6442: HCLKD0=%ld, HCLKD1=%ld, PCLKD0=%ld, PCLKD1=%ld\n",
-			hclkd0, hclkd1, pclkd0, pclkd1);
-
-	/* For backward compatibility */
-	clk_f.rate = arm;
-	clk_h.rate = hclkd1;
-	clk_p.rate = pclkd1;
-
-	clk_pclkd0.rate = pclkd0;
-	clk_pclkd1.rate = pclkd1;
-}
-
-static struct clk init_clocks_off[] = {
-	{
-		.name		= "pdma",
-		.id		= -1,
-		.parent		= &clk_pclkd1,
-		.enable		= s5p6442_clk_ip0_ctrl,
-		.ctrlbit	= (1 << 3),
-	},
-};
-
-static struct clk init_clocks[] = {
-	{
-		.name		= "systimer",
-		.id		= -1,
-		.parent		= &clk_pclkd1,
-		.enable		= s5p6442_clk_ip3_ctrl,
-		.ctrlbit	= (1<<16),
-	}, {
-		.name		= "uart",
-		.id		= 0,
-		.parent		= &clk_pclkd1,
-		.enable		= s5p6442_clk_ip3_ctrl,
-		.ctrlbit	= (1<<17),
-	}, {
-		.name		= "uart",
-		.id		= 1,
-		.parent		= &clk_pclkd1,
-		.enable		= s5p6442_clk_ip3_ctrl,
-		.ctrlbit	= (1<<18),
-	}, {
-		.name		= "uart",
-		.id		= 2,
-		.parent		= &clk_pclkd1,
-		.enable		= s5p6442_clk_ip3_ctrl,
-		.ctrlbit	= (1<<19),
-	}, {
-		.name		= "watchdog",
-		.id		= -1,
-		.parent		= &clk_pclkd1,
-		.enable		= s5p6442_clk_ip3_ctrl,
-		.ctrlbit	= (1 << 22),
-	}, {
-		.name		= "timers",
-		.id		= -1,
-		.parent		= &clk_pclkd1,
-		.enable		= s5p6442_clk_ip3_ctrl,
-		.ctrlbit	= (1<<23),
-	},
-};
-
-static struct clk *clks[] __initdata = {
-	&clk_ext,
-	&clk_epll,
-	&clk_mout_apll.clk,
-	&clk_mout_mpll.clk,
-	&clk_mout_epll.clk,
-	&clk_mout_d0.clk,
-	&clk_mout_d0sync.clk,
-	&clk_mout_d1.clk,
-	&clk_mout_d1sync.clk,
-	&clk_hclkd0,
-	&clk_pclkd0,
-	&clk_hclkd1,
-	&clk_pclkd1,
-};
-
-void __init s5p6442_register_clocks(void)
-{
-	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-
-	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
-	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
-
-	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-
-	s3c_pwmclk_init();
-}
diff --git a/arch/arm/mach-s5p6442/cpu.c b/arch/arm/mach-s5p6442/cpu.c
deleted file mode 100644
index 842af86..0000000
--- a/arch/arm/mach-s5p6442/cpu.c
+++ /dev/null
@@ -1,143 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/cpu.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/sysdev.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/sched.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/proc-fns.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <asm/irq.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-#include <plat/s5p6442.h>
-
-/* Initial IO mappings */
-
-static struct map_desc s5p6442_iodesc[] __initdata = {
-	{
-		.virtual	= (unsigned long)S5P_VA_SYSTIMER,
-		.pfn		= __phys_to_pfn(S5P6442_PA_SYSTIMER),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_GPIO,
-		.pfn		= __phys_to_pfn(S5P6442_PA_GPIO),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)VA_VIC0,
-		.pfn		= __phys_to_pfn(S5P6442_PA_VIC0),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)VA_VIC1,
-		.pfn		= __phys_to_pfn(S5P6442_PA_VIC1),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)VA_VIC2,
-		.pfn		= __phys_to_pfn(S5P6442_PA_VIC2),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_UART,
-		.pfn		= __phys_to_pfn(S3C_PA_UART),
-		.length		= SZ_512K,
-		.type		= MT_DEVICE,
-	}
-};
-
-static void s5p6442_idle(void)
-{
-	if (!need_resched())
-		cpu_do_idle();
-
-	local_irq_enable();
-}
-
-/*
- * s5p6442_map_io
- *
- * register the standard cpu IO areas
- */
-
-void __init s5p6442_map_io(void)
-{
-	iotable_init(s5p6442_iodesc, ARRAY_SIZE(s5p6442_iodesc));
-}
-
-void __init s5p6442_init_clocks(int xtal)
-{
-	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
-
-	s3c24xx_register_baseclocks(xtal);
-	s5p_register_clocks(xtal);
-	s5p6442_register_clocks();
-	s5p6442_setup_clocks();
-}
-
-void __init s5p6442_init_irq(void)
-{
-	/* S5P6442 supports 3 VIC */
-	u32 vic[3];
-
-	/* VIC0, VIC1, and VIC2: some interrupt reserved */
-	vic[0] = 0x7fefffff;
-	vic[1] = 0X7f389c81;
-	vic[2] = 0X1bbbcfff;
-
-	s5p_init_irq(vic, ARRAY_SIZE(vic));
-}
-
-struct sysdev_class s5p6442_sysclass = {
-	.name	= "s5p6442-core",
-};
-
-static struct sys_device s5p6442_sysdev = {
-	.cls	= &s5p6442_sysclass,
-};
-
-static int __init s5p6442_core_init(void)
-{
-	return sysdev_class_register(&s5p6442_sysclass);
-}
-
-core_initcall(s5p6442_core_init);
-
-int __init s5p6442_init(void)
-{
-	printk(KERN_INFO "S5P6442: Initializing architecture\n");
-
-	/* set idle function */
-	pm_idle = s5p6442_idle;
-
-	return sysdev_register(&s5p6442_sysdev);
-}
diff --git a/arch/arm/mach-s5p6442/dev-audio.c b/arch/arm/mach-s5p6442/dev-audio.c
deleted file mode 100644
index 8719dc4..0000000
--- a/arch/arm/mach-s5p6442/dev-audio.c
+++ /dev/null
@@ -1,217 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/dev-audio.c
- *
- * Copyright (c) 2010 Samsung Electronics Co. Ltd
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/audio.h>
-
-#include <mach/map.h>
-#include <mach/dma.h>
-#include <mach/irqs.h>
-
-static int s5p6442_cfg_i2s(struct platform_device *pdev)
-{
-	unsigned int base;
-
-	/* configure GPIO for i2s port */
-	switch (pdev->id) {
-	case 1:
-		base = S5P6442_GPC1(0);
-		break;
-
-	case 0:
-		base = S5P6442_GPC0(0);
-		break;
-
-	default:
-		printk(KERN_ERR "Invalid Device %d\n", pdev->id);
-		return -EINVAL;
-	}
-
-	s3c_gpio_cfgpin_range(base, 5, S3C_GPIO_SFN(2));
-	return 0;
-}
-
-static const char *rclksrc_v35[] = {
-	[0] = "busclk",
-	[1] = "i2sclk",
-};
-
-static struct s3c_audio_pdata i2sv35_pdata = {
-	.cfg_gpio = s5p6442_cfg_i2s,
-	.type = {
-		.i2s = {
-			.quirks = QUIRK_SEC_DAI | QUIRK_NEED_RSTCLR,
-			.src_clk = rclksrc_v35,
-		},
-	},
-};
-
-static struct resource s5p6442_iis0_resource[] = {
-	[0] = {
-		.start = S5P6442_PA_I2S0,
-		.end   = S5P6442_PA_I2S0 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_I2S0_TX,
-		.end   = DMACH_I2S0_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_I2S0_RX,
-		.end   = DMACH_I2S0_RX,
-		.flags = IORESOURCE_DMA,
-	},
-	[3] = {
-		.start = DMACH_I2S0S_TX,
-		.end = DMACH_I2S0S_TX,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-struct platform_device s5p6442_device_iis0 = {
-	.name = "samsung-i2s",
-	.id = 0,
-	.num_resources	  = ARRAY_SIZE(s5p6442_iis0_resource),
-	.resource	  = s5p6442_iis0_resource,
-	.dev = {
-		.platform_data = &i2sv35_pdata,
-	},
-};
-
-static const char *rclksrc_v3[] = {
-	[0] = "iis",
-	[1] = "sclk_audio",
-};
-
-static struct s3c_audio_pdata i2sv3_pdata = {
-	.cfg_gpio = s5p6442_cfg_i2s,
-	.type = {
-		.i2s = {
-			.src_clk = rclksrc_v3,
-		},
-	},
-};
-
-static struct resource s5p6442_iis1_resource[] = {
-	[0] = {
-		.start = S5P6442_PA_I2S1,
-		.end   = S5P6442_PA_I2S1 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_I2S1_TX,
-		.end   = DMACH_I2S1_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_I2S1_RX,
-		.end   = DMACH_I2S1_RX,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-struct platform_device s5p6442_device_iis1 = {
-	.name		  = "samsung-i2s",
-	.id		  = 1,
-	.num_resources	  = ARRAY_SIZE(s5p6442_iis1_resource),
-	.resource	  = s5p6442_iis1_resource,
-	.dev = {
-		.platform_data = &i2sv3_pdata,
-	},
-};
-
-/* PCM Controller platform_devices */
-
-static int s5p6442_pcm_cfg_gpio(struct platform_device *pdev)
-{
-	unsigned int base;
-
-	switch (pdev->id) {
-	case 0:
-		base = S5P6442_GPC0(0);
-		break;
-
-	case 1:
-		base = S5P6442_GPC1(0);
-		break;
-
-	default:
-		printk(KERN_DEBUG "Invalid PCM Controller number!");
-		return -EINVAL;
-	}
-
-	s3c_gpio_cfgpin_range(base, 5, S3C_GPIO_SFN(3));
-	return 0;
-}
-
-static struct s3c_audio_pdata s3c_pcm_pdata = {
-	.cfg_gpio = s5p6442_pcm_cfg_gpio,
-};
-
-static struct resource s5p6442_pcm0_resource[] = {
-	[0] = {
-		.start = S5P6442_PA_PCM0,
-		.end   = S5P6442_PA_PCM0 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_PCM0_TX,
-		.end   = DMACH_PCM0_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_PCM0_RX,
-		.end   = DMACH_PCM0_RX,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-struct platform_device s5p6442_device_pcm0 = {
-	.name		  = "samsung-pcm",
-	.id		  = 0,
-	.num_resources	  = ARRAY_SIZE(s5p6442_pcm0_resource),
-	.resource	  = s5p6442_pcm0_resource,
-	.dev = {
-		.platform_data = &s3c_pcm_pdata,
-	},
-};
-
-static struct resource s5p6442_pcm1_resource[] = {
-	[0] = {
-		.start = S5P6442_PA_PCM1,
-		.end   = S5P6442_PA_PCM1 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_PCM1_TX,
-		.end   = DMACH_PCM1_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_PCM1_RX,
-		.end   = DMACH_PCM1_RX,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-struct platform_device s5p6442_device_pcm1 = {
-	.name		  = "samsung-pcm",
-	.id		  = 1,
-	.num_resources	  = ARRAY_SIZE(s5p6442_pcm1_resource),
-	.resource	  = s5p6442_pcm1_resource,
-	.dev = {
-		.platform_data = &s3c_pcm_pdata,
-	},
-};
diff --git a/arch/arm/mach-s5p6442/dev-spi.c b/arch/arm/mach-s5p6442/dev-spi.c
deleted file mode 100644
index cce8c24..0000000
--- a/arch/arm/mach-s5p6442/dev-spi.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/dev-spi.c
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-
-#include <mach/dma.h>
-#include <mach/map.h>
-#include <mach/irqs.h>
-#include <mach/spi-clocks.h>
-
-#include <plat/s3c64xx-spi.h>
-#include <plat/gpio-cfg.h>
-
-static char *spi_src_clks[] = {
-	[S5P6442_SPI_SRCCLK_PCLK] = "pclk",
-	[S5P6442_SPI_SRCCLK_SCLK] = "spi_epll",
-};
-
-/* SPI Controller platform_devices */
-
-/* Since we emulate multi-cs capability, we do not touch the CS.
- * The emulated CS is toggled by board specific mechanism, as it can
- * be either some immediate GPIO or some signal out of some other
- * chip in between ... or some yet another way.
- * We simply do not assume anything about CS.
- */
-static int s5p6442_spi_cfg_gpio(struct platform_device *pdev)
-{
-	switch (pdev->id) {
-	case 0:
-		s3c_gpio_cfgpin(S5P6442_GPB(0), S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(S5P6442_GPB(0), S3C_GPIO_PULL_UP);
-		s3c_gpio_cfgall_range(S5P6442_GPB(2), 2,
-				      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-		break;
-
-	default:
-		dev_err(&pdev->dev, "Invalid SPI Controller number!");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static struct resource s5p6442_spi0_resource[] = {
-	[0] = {
-		.start = S5P6442_PA_SPI,
-		.end   = S5P6442_PA_SPI + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_SPI0_TX,
-		.end   = DMACH_SPI0_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_SPI0_RX,
-		.end   = DMACH_SPI0_RX,
-		.flags = IORESOURCE_DMA,
-	},
-	[3] = {
-		.start = IRQ_SPI0,
-		.end   = IRQ_SPI0,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct s3c64xx_spi_info s5p6442_spi0_pdata = {
-	.cfg_gpio = s5p6442_spi_cfg_gpio,
-	.fifo_lvl_mask = 0x1ff,
-	.rx_lvl_offset = 15,
-};
-
-static u64 spi_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device s5p6442_device_spi = {
-	.name		  = "s3c64xx-spi",
-	.id		  = 0,
-	.num_resources	  = ARRAY_SIZE(s5p6442_spi0_resource),
-	.resource	  = s5p6442_spi0_resource,
-	.dev = {
-		.dma_mask		= &spi_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data = &s5p6442_spi0_pdata,
-	},
-};
-
-void __init s5p6442_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
-{
-	struct s3c64xx_spi_info *pd;
-
-	/* Reject invalid configuration */
-	if (!num_cs || src_clk_nr < 0
-			|| src_clk_nr > S5P6442_SPI_SRCCLK_SCLK) {
-		printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__);
-		return;
-	}
-
-	switch (cntrlr) {
-	case 0:
-		pd = &s5p6442_spi0_pdata;
-		break;
-	default:
-		printk(KERN_ERR "%s: Invalid SPI controller(%d)\n",
-							__func__, cntrlr);
-		return;
-	}
-
-	pd->num_cs = num_cs;
-	pd->src_clk_nr = src_clk_nr;
-	pd->src_clk_name = spi_src_clks[src_clk_nr];
-}
diff --git a/arch/arm/mach-s5p6442/dma.c b/arch/arm/mach-s5p6442/dma.c
deleted file mode 100644
index 7dfb136..0000000
--- a/arch/arm/mach-s5p6442/dma.c
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-
-#include <plat/devs.h>
-#include <plat/irqs.h>
-
-#include <mach/map.h>
-#include <mach/irqs.h>
-
-#include <plat/s3c-pl330-pdata.h>
-
-static u64 dma_dmamask = DMA_BIT_MASK(32);
-
-static struct resource s5p6442_pdma_resource[] = {
-	[0] = {
-		.start  = S5P6442_PA_PDMA,
-		.end    = S5P6442_PA_PDMA + SZ_4K,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_PDMA,
-		.end	= IRQ_PDMA,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct s3c_pl330_platdata s5p6442_pdma_pdata = {
-	.peri = {
-		[0] = DMACH_UART0_RX,
-		[1] = DMACH_UART0_TX,
-		[2] = DMACH_UART1_RX,
-		[3] = DMACH_UART1_TX,
-		[4] = DMACH_UART2_RX,
-		[5] = DMACH_UART2_TX,
-		[6] = DMACH_MAX,
-		[7] = DMACH_MAX,
-		[8] = DMACH_MAX,
-		[9] = DMACH_I2S0_RX,
-		[10] = DMACH_I2S0_TX,
-		[11] = DMACH_I2S0S_TX,
-		[12] = DMACH_I2S1_RX,
-		[13] = DMACH_I2S1_TX,
-		[14] = DMACH_MAX,
-		[15] = DMACH_MAX,
-		[16] = DMACH_SPI0_RX,
-		[17] = DMACH_SPI0_TX,
-		[18] = DMACH_MAX,
-		[19] = DMACH_MAX,
-		[20] = DMACH_PCM0_RX,
-		[21] = DMACH_PCM0_TX,
-		[22] = DMACH_PCM1_RX,
-		[23] = DMACH_PCM1_TX,
-		[24] = DMACH_MAX,
-		[25] = DMACH_MAX,
-		[26] = DMACH_MAX,
-		[27] = DMACH_MSM_REQ0,
-		[28] = DMACH_MSM_REQ1,
-		[29] = DMACH_MSM_REQ2,
-		[30] = DMACH_MSM_REQ3,
-		[31] = DMACH_MAX,
-	},
-};
-
-static struct platform_device s5p6442_device_pdma = {
-	.name		= "s3c-pl330",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s5p6442_pdma_resource),
-	.resource	= s5p6442_pdma_resource,
-	.dev		= {
-		.dma_mask = &dma_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = &s5p6442_pdma_pdata,
-	},
-};
-
-static struct platform_device *s5p6442_dmacs[] __initdata = {
-	&s5p6442_device_pdma,
-};
-
-static int __init s5p6442_dma_init(void)
-{
-	platform_add_devices(s5p6442_dmacs, ARRAY_SIZE(s5p6442_dmacs));
-
-	return 0;
-}
-arch_initcall(s5p6442_dma_init);
diff --git a/arch/arm/mach-s5p6442/include/mach/debug-macro.S b/arch/arm/mach-s5p6442/include/mach/debug-macro.S
deleted file mode 100644
index e2213205..0000000
--- a/arch/arm/mach-s5p6442/include/mach/debug-macro.S
+++ /dev/null
@@ -1,35 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/include/mach/debug-macro.S
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * Based on arch/arm/mach-s3c6400/include/mach/debug-macro.S
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* pull in the relevant register and map files. */
-
-#include <mach/map.h>
-#include <plat/regs-serial.h>
-
-	.macro addruart, rp, rv
-		ldr	\rp, = S3C_PA_UART
-		ldr	\rv, = S3C_VA_UART
-#if CONFIG_DEBUG_S3C_UART != 0
-		add	\rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART)
-		add	\rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART)
-#endif
-	.endm
-
-#define fifo_full fifo_full_s5pv210
-#define fifo_level fifo_level_s5pv210
-
-/* include the reset of the code which will do the work, we're only
- * compiling for a single cpu processor type so the default of s3c2440
- * will be fine with us.
- */
-
-#include <plat/debug-macro.S>
diff --git a/arch/arm/mach-s5p6442/include/mach/dma.h b/arch/arm/mach-s5p6442/include/mach/dma.h
deleted file mode 100644
index 81209eb..0000000
--- a/arch/arm/mach-s5p6442/include/mach/dma.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __MACH_DMA_H
-#define __MACH_DMA_H
-
-/* This platform uses the common S3C DMA API driver for PL330 */
-#include <plat/s3c-dma-pl330.h>
-
-#endif /* __MACH_DMA_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/entry-macro.S b/arch/arm/mach-s5p6442/include/mach/entry-macro.S
deleted file mode 100644
index 6d574ed..0000000
--- a/arch/arm/mach-s5p6442/include/mach/entry-macro.S
+++ /dev/null
@@ -1,48 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/include/mach/entry-macro.S
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * Low-level IRQ helper macros for the Samsung S5P6442
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <asm/hardware/vic.h>
-#include <mach/map.h>
-#include <plat/irqs.h>
-
-	.macro	disable_fiq
-	.endm
-
-	.macro	get_irqnr_preamble, base, tmp
-	ldr	\base, =VA_VIC0
-	.endm
-
-	.macro	arch_ret_to_user, tmp1, tmp2
-	.endm
-
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-	@ check the vic0
-	mov	\irqnr, # S5P_IRQ_OFFSET + 31
-	ldr	\irqstat, [ \base, # VIC_IRQ_STATUS ]
-	teq	\irqstat, #0
-
-	@ otherwise try vic1
-	addeq	\tmp, \base, #(VA_VIC1 - VA_VIC0)
-	addeq	\irqnr, \irqnr, #32
-	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
-	teqeq	\irqstat, #0
-
-	@ otherwise try vic2
-	addeq	\tmp, \base, #(VA_VIC2 - VA_VIC0)
-	addeq	\irqnr, \irqnr, #32
-	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
-	teqeq	\irqstat, #0
-
-	clzne	\irqstat, \irqstat
-	subne	\irqnr, \irqnr, \irqstat
-	.endm
diff --git a/arch/arm/mach-s5p6442/include/mach/gpio.h b/arch/arm/mach-s5p6442/include/mach/gpio.h
deleted file mode 100644
index b8715df..0000000
--- a/arch/arm/mach-s5p6442/include/mach/gpio.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/include/mach/gpio.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P6442 - GPIO lib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H __FILE__
-
-#define gpio_get_value	__gpio_get_value
-#define gpio_set_value	__gpio_set_value
-#define gpio_cansleep	__gpio_cansleep
-#define gpio_to_irq	__gpio_to_irq
-
-/* GPIO bank sizes */
-#define S5P6442_GPIO_A0_NR	(8)
-#define S5P6442_GPIO_A1_NR	(2)
-#define S5P6442_GPIO_B_NR	(4)
-#define S5P6442_GPIO_C0_NR	(5)
-#define S5P6442_GPIO_C1_NR	(5)
-#define S5P6442_GPIO_D0_NR	(2)
-#define S5P6442_GPIO_D1_NR	(6)
-#define S5P6442_GPIO_E0_NR	(8)
-#define S5P6442_GPIO_E1_NR	(5)
-#define S5P6442_GPIO_F0_NR	(8)
-#define S5P6442_GPIO_F1_NR	(8)
-#define S5P6442_GPIO_F2_NR	(8)
-#define S5P6442_GPIO_F3_NR	(6)
-#define S5P6442_GPIO_G0_NR	(7)
-#define S5P6442_GPIO_G1_NR	(7)
-#define S5P6442_GPIO_G2_NR	(7)
-#define S5P6442_GPIO_H0_NR	(8)
-#define S5P6442_GPIO_H1_NR	(8)
-#define S5P6442_GPIO_H2_NR	(8)
-#define S5P6442_GPIO_H3_NR	(8)
-#define S5P6442_GPIO_J0_NR	(8)
-#define S5P6442_GPIO_J1_NR	(6)
-#define S5P6442_GPIO_J2_NR	(8)
-#define S5P6442_GPIO_J3_NR	(8)
-#define S5P6442_GPIO_J4_NR	(5)
-
-/* GPIO bank numbers */
-
-/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
- * space for debugging purposes so that any accidental
- * change from one gpio bank to another can be caught.
-*/
-
-#define S5P6442_GPIO_NEXT(__gpio) \
-	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
-
-enum s5p_gpio_number {
-	S5P6442_GPIO_A0_START	= 0,
-	S5P6442_GPIO_A1_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_A0),
-	S5P6442_GPIO_B_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_A1),
-	S5P6442_GPIO_C0_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_B),
-	S5P6442_GPIO_C1_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_C0),
-	S5P6442_GPIO_D0_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_C1),
-	S5P6442_GPIO_D1_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_D0),
-	S5P6442_GPIO_E0_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_D1),
-	S5P6442_GPIO_E1_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_E0),
-	S5P6442_GPIO_F0_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_E1),
-	S5P6442_GPIO_F1_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_F0),
-	S5P6442_GPIO_F2_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_F1),
-	S5P6442_GPIO_F3_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_F2),
-	S5P6442_GPIO_G0_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_F3),
-	S5P6442_GPIO_G1_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_G0),
-	S5P6442_GPIO_G2_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_G1),
-	S5P6442_GPIO_H0_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_G2),
-	S5P6442_GPIO_H1_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_H0),
-	S5P6442_GPIO_H2_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_H1),
-	S5P6442_GPIO_H3_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_H2),
-	S5P6442_GPIO_J0_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_H3),
-	S5P6442_GPIO_J1_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_J0),
-	S5P6442_GPIO_J2_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_J1),
-	S5P6442_GPIO_J3_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_J2),
-	S5P6442_GPIO_J4_START	= S5P6442_GPIO_NEXT(S5P6442_GPIO_J3),
-};
-
-/* S5P6442 GPIO number definitions. */
-#define S5P6442_GPA0(_nr)	(S5P6442_GPIO_A0_START + (_nr))
-#define S5P6442_GPA1(_nr)	(S5P6442_GPIO_A1_START + (_nr))
-#define S5P6442_GPB(_nr)	(S5P6442_GPIO_B_START + (_nr))
-#define S5P6442_GPC0(_nr)	(S5P6442_GPIO_C0_START + (_nr))
-#define S5P6442_GPC1(_nr)	(S5P6442_GPIO_C1_START + (_nr))
-#define S5P6442_GPD0(_nr)	(S5P6442_GPIO_D0_START + (_nr))
-#define S5P6442_GPD1(_nr)	(S5P6442_GPIO_D1_START + (_nr))
-#define S5P6442_GPE0(_nr)	(S5P6442_GPIO_E0_START + (_nr))
-#define S5P6442_GPE1(_nr)	(S5P6442_GPIO_E1_START + (_nr))
-#define S5P6442_GPF0(_nr)	(S5P6442_GPIO_F0_START + (_nr))
-#define S5P6442_GPF1(_nr)	(S5P6442_GPIO_F1_START + (_nr))
-#define S5P6442_GPF2(_nr)	(S5P6442_GPIO_F2_START + (_nr))
-#define S5P6442_GPF3(_nr)	(S5P6442_GPIO_F3_START + (_nr))
-#define S5P6442_GPG0(_nr)	(S5P6442_GPIO_G0_START + (_nr))
-#define S5P6442_GPG1(_nr)	(S5P6442_GPIO_G1_START + (_nr))
-#define S5P6442_GPG2(_nr)	(S5P6442_GPIO_G2_START + (_nr))
-#define S5P6442_GPH0(_nr)	(S5P6442_GPIO_H0_START + (_nr))
-#define S5P6442_GPH1(_nr)	(S5P6442_GPIO_H1_START + (_nr))
-#define S5P6442_GPH2(_nr)	(S5P6442_GPIO_H2_START + (_nr))
-#define S5P6442_GPH3(_nr)	(S5P6442_GPIO_H3_START + (_nr))
-#define S5P6442_GPJ0(_nr)	(S5P6442_GPIO_J0_START + (_nr))
-#define S5P6442_GPJ1(_nr)	(S5P6442_GPIO_J1_START + (_nr))
-#define S5P6442_GPJ2(_nr)	(S5P6442_GPIO_J2_START + (_nr))
-#define S5P6442_GPJ3(_nr)	(S5P6442_GPIO_J3_START + (_nr))
-#define S5P6442_GPJ4(_nr)	(S5P6442_GPIO_J4_START + (_nr))
-
-/* the end of the S5P6442 specific gpios */
-#define S5P6442_GPIO_END	(S5P6442_GPJ4(S5P6442_GPIO_J4_NR) + 1)
-#define S3C_GPIO_END		S5P6442_GPIO_END
-
-/* define the number of gpios we need to the one after the GPJ4() range */
-#define ARCH_NR_GPIOS		(S5P6442_GPJ4(S5P6442_GPIO_J4_NR) +	\
-				 CONFIG_SAMSUNG_GPIO_EXTRA + 1)
-
-#include <asm-generic/gpio.h>
-
-#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/hardware.h b/arch/arm/mach-s5p6442/include/mach/hardware.h
deleted file mode 100644
index 8cd7b67..0000000
--- a/arch/arm/mach-s5p6442/include/mach/hardware.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/include/mach/hardware.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P6442 - Hardware support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H __FILE__
-
-/* currently nothing here, placeholder */
-
-#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/io.h b/arch/arm/mach-s5p6442/include/mach/io.h
deleted file mode 100644
index 5d2195a..0000000
--- a/arch/arm/mach-s5p6442/include/mach/io.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* arch/arm/mach-s5p6442/include/mach/io.h
- *
- * Copyright 2008-2010 Ben Dooks <ben-linux@fluff.org>
- *
- * Default IO routines for S5P6442
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-/* No current ISA/PCI bus support. */
-#define __io(a)		__typesafe_io(a)
-#define __mem_pci(a)	(a)
-
-#define IO_SPACE_LIMIT (0xFFFFFFFF)
-
-#endif
diff --git a/arch/arm/mach-s5p6442/include/mach/irqs.h b/arch/arm/mach-s5p6442/include/mach/irqs.h
deleted file mode 100644
index 3fbc6c3..0000000
--- a/arch/arm/mach-s5p6442/include/mach/irqs.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/include/mach/irqs.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P6442 - IRQ definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H __FILE__
-
-#include <plat/irqs.h>
-
-/* VIC0 */
-#define IRQ_EINT16_31 		S5P_IRQ_VIC0(16)
-#define IRQ_BATF 		S5P_IRQ_VIC0(17)
-#define IRQ_MDMA 		S5P_IRQ_VIC0(18)
-#define IRQ_PDMA 		S5P_IRQ_VIC0(19)
-#define IRQ_TIMER0_VIC		S5P_IRQ_VIC0(21)
-#define IRQ_TIMER1_VIC		S5P_IRQ_VIC0(22)
-#define IRQ_TIMER2_VIC		S5P_IRQ_VIC0(23)
-#define IRQ_TIMER3_VIC		S5P_IRQ_VIC0(24)
-#define IRQ_TIMER4_VIC		S5P_IRQ_VIC0(25)
-#define IRQ_SYSTIMER		S5P_IRQ_VIC0(26)
-#define IRQ_WDT			S5P_IRQ_VIC0(27)
-#define IRQ_RTC_ALARM		S5P_IRQ_VIC0(28)
-#define IRQ_RTC_TIC		S5P_IRQ_VIC0(29)
-#define IRQ_GPIOINT		S5P_IRQ_VIC0(30)
-
-/* VIC1 */
-#define IRQ_PMU			S5P_IRQ_VIC1(0)
-#define IRQ_ONENAND 		S5P_IRQ_VIC1(7)
-#define IRQ_UART0 		S5P_IRQ_VIC1(10)
-#define IRQ_UART1 		S5P_IRQ_VIC1(11)
-#define IRQ_UART2 		S5P_IRQ_VIC1(12)
-#define IRQ_SPI0 		S5P_IRQ_VIC1(15)
-#define IRQ_IIC 		S5P_IRQ_VIC1(19)
-#define IRQ_IIC1 		S5P_IRQ_VIC1(20)
-#define IRQ_IIC2 		S5P_IRQ_VIC1(21)
-#define IRQ_OTG 		S5P_IRQ_VIC1(24)
-#define IRQ_MSM 		S5P_IRQ_VIC1(25)
-#define IRQ_HSMMC0 		S5P_IRQ_VIC1(26)
-#define IRQ_HSMMC1 		S5P_IRQ_VIC1(27)
-#define IRQ_HSMMC2 		S5P_IRQ_VIC1(28)
-#define IRQ_COMMRX 		S5P_IRQ_VIC1(29)
-#define IRQ_COMMTX 		S5P_IRQ_VIC1(30)
-
-/* VIC2 */
-#define IRQ_LCD0 		S5P_IRQ_VIC2(0)
-#define IRQ_LCD1 		S5P_IRQ_VIC2(1)
-#define IRQ_LCD2 		S5P_IRQ_VIC2(2)
-#define IRQ_LCD3 		S5P_IRQ_VIC2(3)
-#define IRQ_ROTATOR 		S5P_IRQ_VIC2(4)
-#define IRQ_FIMC0 		S5P_IRQ_VIC2(5)
-#define IRQ_FIMC1 		S5P_IRQ_VIC2(6)
-#define IRQ_FIMC2 		S5P_IRQ_VIC2(7)
-#define IRQ_JPEG 		S5P_IRQ_VIC2(8)
-#define IRQ_3D 			S5P_IRQ_VIC2(10)
-#define IRQ_Mixer 		S5P_IRQ_VIC2(11)
-#define IRQ_MFC 		S5P_IRQ_VIC2(14)
-#define IRQ_TVENC 		S5P_IRQ_VIC2(15)
-#define IRQ_I2S0 		S5P_IRQ_VIC2(16)
-#define IRQ_I2S1 		S5P_IRQ_VIC2(17)
-#define IRQ_RP 			S5P_IRQ_VIC2(19)
-#define IRQ_PCM0 		S5P_IRQ_VIC2(20)
-#define IRQ_PCM1 		S5P_IRQ_VIC2(21)
-#define IRQ_ADC 		S5P_IRQ_VIC2(23)
-#define IRQ_PENDN 		S5P_IRQ_VIC2(24)
-#define IRQ_KEYPAD 		S5P_IRQ_VIC2(25)
-#define IRQ_SSS_INT 		S5P_IRQ_VIC2(27)
-#define IRQ_SSS_HASH 		S5P_IRQ_VIC2(28)
-#define IRQ_VIC_END 		S5P_IRQ_VIC2(31)
-
-#define S5P_IRQ_EINT_BASE	(IRQ_VIC_END + 1)
-
-#define S5P_EINT_BASE1		(S5P_IRQ_VIC0(0))
-#define S5P_EINT_BASE2		(S5P_IRQ_EINT_BASE)
-
-/* Set the default NR_IRQS */
-
-#define NR_IRQS 		(IRQ_EINT(31) + 1)
-
-#endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/map.h b/arch/arm/mach-s5p6442/include/mach/map.h
deleted file mode 100644
index 058dab4..0000000
--- a/arch/arm/mach-s5p6442/include/mach/map.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/include/mach/map.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P6442 - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MAP_H
-#define __ASM_ARCH_MAP_H __FILE__
-
-#include <plat/map-base.h>
-#include <plat/map-s5p.h>
-
-#define S5P6442_PA_SDRAM	0x20000000
-
-#define S5P6442_PA_I2S0		0xC0B00000
-#define S5P6442_PA_I2S1		0xF2200000
-
-#define S5P6442_PA_CHIPID	0xE0000000
-
-#define S5P6442_PA_SYSCON	0xE0100000
-
-#define S5P6442_PA_GPIO		0xE0200000
-
-#define S5P6442_PA_VIC0		0xE4000000
-#define S5P6442_PA_VIC1		0xE4100000
-#define S5P6442_PA_VIC2		0xE4200000
-
-#define S5P6442_PA_SROMC	0xE7000000
-
-#define S5P6442_PA_MDMA		0xE8000000
-#define S5P6442_PA_PDMA		0xE9000000
-
-#define S5P6442_PA_TIMER	0xEA000000
-
-#define S5P6442_PA_SYSTIMER	0xEA100000
-
-#define S5P6442_PA_WATCHDOG	0xEA200000
-
-#define S5P6442_PA_UART		0xEC000000
-
-#define S5P6442_PA_IIC0		0xEC100000
-
-#define S5P6442_PA_SPI		0xEC300000
-
-#define S5P6442_PA_PCM0		0xF2400000
-#define S5P6442_PA_PCM1		0xF2500000
-
-/* Compatibiltiy Defines */
-
-#define S3C_PA_IIC		S5P6442_PA_IIC0
-#define S3C_PA_WDT		S5P6442_PA_WATCHDOG
-
-#define S5P_PA_CHIPID		S5P6442_PA_CHIPID
-#define S5P_PA_SDRAM		S5P6442_PA_SDRAM
-#define S5P_PA_SROMC		S5P6442_PA_SROMC
-#define S5P_PA_SYSCON		S5P6442_PA_SYSCON
-#define S5P_PA_TIMER		S5P6442_PA_TIMER
-
-/* UART */
-
-#define S3C_PA_UART		S5P6442_PA_UART
-
-#define S5P_PA_UART(x)		(S3C_PA_UART + ((x) * S3C_UART_OFFSET))
-#define S5P_PA_UART0		S5P_PA_UART(0)
-#define S5P_PA_UART1		S5P_PA_UART(1)
-#define S5P_PA_UART2		S5P_PA_UART(2)
-
-#define S5P_SZ_UART		SZ_256
-
-#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/memory.h b/arch/arm/mach-s5p6442/include/mach/memory.h
deleted file mode 100644
index cfe259d..0000000
--- a/arch/arm/mach-s5p6442/include/mach/memory.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/include/mach/memory.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P6442 - Memory definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET		UL(0x20000000)
-#define CONSISTENT_DMA_SIZE	SZ_8M
-
-#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/pwm-clock.h b/arch/arm/mach-s5p6442/include/mach/pwm-clock.h
deleted file mode 100644
index 2724b37..0000000
--- a/arch/arm/mach-s5p6442/include/mach/pwm-clock.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/include/mach/pwm-clock.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h
- *
- * S5P6442 - pwm clock and timer support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_PWMCLK_H
-#define __ASM_ARCH_PWMCLK_H __FILE__
-
-/**
- * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
- * @tcfg: The timer TCFG1 register bits shifted down to 0.
- *
- * Return true if the given configuration from TCFG1 is a TCLK instead
- * any of the TDIV clocks.
- */
-static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
-{
-	return tcfg == S3C64XX_TCFG1_MUX_TCLK;
-}
-
-/**
- * tcfg_to_divisor() - convert tcfg1 setting to a divisor
- * @tcfg1: The tcfg1 setting, shifted down.
- *
- * Get the divisor value for the given tcfg1 setting. We assume the
- * caller has already checked to see if this is not a TCLK source.
- */
-static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
-{
-	return 1 << tcfg1;
-}
-
-/**
- * pwm_tdiv_has_div1() - does the tdiv setting have a /1
- *
- * Return true if we have a /1 in the tdiv setting.
- */
-static inline unsigned int pwm_tdiv_has_div1(void)
-{
-	return 1;
-}
-
-/**
- * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
- * @div: The divisor to calculate the bit information for.
- *
- * Turn a divisor into the necessary bit field for TCFG1.
- */
-static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
-{
-	return ilog2(div);
-}
-
-#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK
-
-#endif /* __ASM_ARCH_PWMCLK_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/regs-clock.h b/arch/arm/mach-s5p6442/include/mach/regs-clock.h
deleted file mode 100644
index 00828a3..0000000
--- a/arch/arm/mach-s5p6442/include/mach/regs-clock.h
+++ /dev/null
@@ -1,104 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/include/mach/regs-clock.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P6442 - Clock register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_CLOCK_H
-#define __ASM_ARCH_REGS_CLOCK_H __FILE__
-
-#include <mach/map.h>
-
-#define S5P_CLKREG(x)		(S3C_VA_SYS + (x))
-
-#define S5P_APLL_LOCK		S5P_CLKREG(0x00)
-#define S5P_MPLL_LOCK		S5P_CLKREG(0x08)
-#define S5P_EPLL_LOCK		S5P_CLKREG(0x10)
-#define S5P_VPLL_LOCK		S5P_CLKREG(0x20)
-
-#define S5P_APLL_CON		S5P_CLKREG(0x100)
-#define S5P_MPLL_CON		S5P_CLKREG(0x108)
-#define S5P_EPLL_CON		S5P_CLKREG(0x110)
-#define S5P_VPLL_CON		S5P_CLKREG(0x120)
-
-#define S5P_CLK_SRC0		S5P_CLKREG(0x200)
-#define S5P_CLK_SRC1		S5P_CLKREG(0x204)
-#define S5P_CLK_SRC2		S5P_CLKREG(0x208)
-#define S5P_CLK_SRC3		S5P_CLKREG(0x20C)
-#define S5P_CLK_SRC4		S5P_CLKREG(0x210)
-#define S5P_CLK_SRC5		S5P_CLKREG(0x214)
-#define S5P_CLK_SRC6		S5P_CLKREG(0x218)
-
-#define S5P_CLK_SRC_MASK0	S5P_CLKREG(0x280)
-#define S5P_CLK_SRC_MASK1	S5P_CLKREG(0x284)
-
-#define S5P_CLK_DIV0		S5P_CLKREG(0x300)
-#define S5P_CLK_DIV1		S5P_CLKREG(0x304)
-#define S5P_CLK_DIV2		S5P_CLKREG(0x308)
-#define S5P_CLK_DIV3		S5P_CLKREG(0x30C)
-#define S5P_CLK_DIV4		S5P_CLKREG(0x310)
-#define S5P_CLK_DIV5		S5P_CLKREG(0x314)
-#define S5P_CLK_DIV6		S5P_CLKREG(0x318)
-
-#define S5P_CLKGATE_IP0		S5P_CLKREG(0x460)
-#define S5P_CLKGATE_IP3		S5P_CLKREG(0x46C)
-
-/* CLK_OUT */
-#define S5P_CLK_OUT_SHIFT	(12)
-#define S5P_CLK_OUT_MASK	(0x1F << S5P_CLK_OUT_SHIFT)
-#define S5P_CLK_OUT		S5P_CLKREG(0x500)
-
-#define S5P_CLK_DIV_STAT0	S5P_CLKREG(0x1000)
-#define S5P_CLK_DIV_STAT1	S5P_CLKREG(0x1004)
-
-#define S5P_CLK_MUX_STAT0	S5P_CLKREG(0x1100)
-#define S5P_CLK_MUX_STAT1	S5P_CLKREG(0x1104)
-
-#define S5P_MDNIE_SEL		S5P_CLKREG(0x7008)
-
-/* Register Bit definition */
-#define S5P_EPLL_EN     		(1<<31)
-#define S5P_EPLL_MASK   		0xffffffff
-#define S5P_EPLLVAL(_m, _p, _s)   	((_m) << 16 | ((_p) << 8) | ((_s)))
-
-/* CLKDIV0 */
-#define S5P_CLKDIV0_APLL_SHIFT		(0)
-#define S5P_CLKDIV0_APLL_MASK		(0x7 << S5P_CLKDIV0_APLL_SHIFT)
-#define S5P_CLKDIV0_A2M_SHIFT		(4)
-#define S5P_CLKDIV0_A2M_MASK		(0x7 << S5P_CLKDIV0_A2M_SHIFT)
-#define S5P_CLKDIV0_D0CLK_SHIFT		(16)
-#define S5P_CLKDIV0_D0CLK_MASK		(0xF << S5P_CLKDIV0_D0CLK_SHIFT)
-#define S5P_CLKDIV0_P0CLK_SHIFT		(20)
-#define S5P_CLKDIV0_P0CLK_MASK		(0x7 << S5P_CLKDIV0_P0CLK_SHIFT)
-#define S5P_CLKDIV0_D1CLK_SHIFT		(24)
-#define S5P_CLKDIV0_D1CLK_MASK		(0xF << S5P_CLKDIV0_D1CLK_SHIFT)
-#define S5P_CLKDIV0_P1CLK_SHIFT		(28)
-#define S5P_CLKDIV0_P1CLK_MASK		(0x7 << S5P_CLKDIV0_P1CLK_SHIFT)
-
-/* Clock MUX status Registers */
-#define S5P_CLK_MUX_STAT0_APLL_SHIFT	(0)
-#define S5P_CLK_MUX_STAT0_APLL_MASK	(0x7 << S5P_CLK_MUX_STAT0_APLL_SHIFT)
-#define S5P_CLK_MUX_STAT0_MPLL_SHIFT	(4)
-#define S5P_CLK_MUX_STAT0_MPLL_MASK	(0x7 << S5P_CLK_MUX_STAT0_MPLL_SHIFT)
-#define S5P_CLK_MUX_STAT0_EPLL_SHIFT	(8)
-#define S5P_CLK_MUX_STAT0_EPLL_MASK	(0x7 << S5P_CLK_MUX_STAT0_EPLL_SHIFT)
-#define S5P_CLK_MUX_STAT0_VPLL_SHIFT	(12)
-#define S5P_CLK_MUX_STAT0_VPLL_MASK	(0x7 << S5P_CLK_MUX_STAT0_VPLL_SHIFT)
-#define S5P_CLK_MUX_STAT0_MUXARM_SHIFT	(16)
-#define S5P_CLK_MUX_STAT0_MUXARM_MASK	(0x7 << S5P_CLK_MUX_STAT0_MUXARM_SHIFT)
-#define S5P_CLK_MUX_STAT0_MUXD0_SHIFT	(20)
-#define S5P_CLK_MUX_STAT0_MUXD0_MASK	(0x7 << S5P_CLK_MUX_STAT0_MUXD0_SHIFT)
-#define S5P_CLK_MUX_STAT0_MUXD1_SHIFT	(24)
-#define S5P_CLK_MUX_STAT0_MUXD1_MASK	(0x7 << S5P_CLK_MUX_STAT0_MUXD1_SHIFT)
-#define S5P_CLK_MUX_STAT1_D1SYNC_SHIFT	(24)
-#define S5P_CLK_MUX_STAT1_D1SYNC_MASK	(0x7 << S5P_CLK_MUX_STAT1_D1SYNC_SHIFT)
-#define S5P_CLK_MUX_STAT1_D0SYNC_SHIFT	(28)
-#define S5P_CLK_MUX_STAT1_D0SYNC_MASK	(0x7 << S5P_CLK_MUX_STAT1_D0SYNC_SHIFT)
-
-#endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/regs-irq.h b/arch/arm/mach-s5p6442/include/mach/regs-irq.h
deleted file mode 100644
index 73782b5..0000000
--- a/arch/arm/mach-s5p6442/include/mach/regs-irq.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/include/mach/regs-irq.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P6442 - IRQ register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_IRQ_H
-#define __ASM_ARCH_REGS_IRQ_H __FILE__
-
-#include <asm/hardware/vic.h>
-#include <mach/map.h>
-
-#endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/spi-clocks.h b/arch/arm/mach-s5p6442/include/mach/spi-clocks.h
deleted file mode 100644
index 7fd8820..0000000
--- a/arch/arm/mach-s5p6442/include/mach/spi-clocks.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/include/mach/spi-clocks.h
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __S5P6442_PLAT_SPI_CLKS_H
-#define __S5P6442_PLAT_SPI_CLKS_H __FILE__
-
-#define S5P6442_SPI_SRCCLK_PCLK		0
-#define S5P6442_SPI_SRCCLK_SCLK		1
-
-#endif /* __S5P6442_PLAT_SPI_CLKS_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/system.h b/arch/arm/mach-s5p6442/include/mach/system.h
deleted file mode 100644
index c30c1cc..0000000
--- a/arch/arm/mach-s5p6442/include/mach/system.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/include/mach/system.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P6442 - system support header
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H __FILE__
-
-#include <plat/system-reset.h>
-
-static void arch_idle(void)
-{
-	/* nothing here yet */
-}
-
-#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/tick.h b/arch/arm/mach-s5p6442/include/mach/tick.h
deleted file mode 100644
index e1d4cab..0000000
--- a/arch/arm/mach-s5p6442/include/mach/tick.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/include/mach/tick.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * Based on arch/arm/mach-s3c6400/include/mach/tick.h
- *
- * S5P6442 - Timer tick support definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TICK_H
-#define __ASM_ARCH_TICK_H __FILE__
-
-static inline u32 s3c24xx_ostimer_pending(void)
-{
-	u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
-	return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0)));
-}
-
-#define TICK_MAX	(0xffffffff)
-
-#endif /* __ASM_ARCH_TICK_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/timex.h b/arch/arm/mach-s5p6442/include/mach/timex.h
deleted file mode 100644
index ff8f2fc..0000000
--- a/arch/arm/mach-s5p6442/include/mach/timex.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* arch/arm/mach-s5p6442/include/mach/timex.h
- *
- * Copyright (c) 2003-2010 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S5P6442 - time parameters
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
- * a variable is useless. It seems as long as we make our timers an
- * exact multiple of HZ, any value that makes a 1->1 correspondence
- * for the time conversion functions to/from jiffies is acceptable.
-*/
-
-#define CLOCK_TICK_RATE 12000000
-
-#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/uncompress.h b/arch/arm/mach-s5p6442/include/mach/uncompress.h
deleted file mode 100644
index 5ac7cbe..0000000
--- a/arch/arm/mach-s5p6442/include/mach/uncompress.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/include/mach/uncompress.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P6442 - uncompress code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <mach/map.h>
-#include <plat/uncompress.h>
-
-static void arch_detect_cpu(void)
-{
-	/* we do not need to do any cpu detection here at the moment. */
-}
-
-#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/vmalloc.h b/arch/arm/mach-s5p6442/include/mach/vmalloc.h
deleted file mode 100644
index 4aa55e5..0000000
--- a/arch/arm/mach-s5p6442/include/mach/vmalloc.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* arch/arm/mach-s5p6442/include/mach/vmalloc.h
- *
- * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S5P6442 vmalloc definition
-*/
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END	0xF6000000UL
-
-#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s5p6442/init.c b/arch/arm/mach-s5p6442/init.c
deleted file mode 100644
index 1874bdb..0000000
--- a/arch/arm/mach-s5p6442/init.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/s5p6442-init.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/s5p6442.h>
-#include <plat/regs-serial.h>
-
-static struct s3c24xx_uart_clksrc s5p6442_serial_clocks[] = {
-	[0] = {
-		.name		= "pclk",
-		.divisor	= 1,
-		.min_baud	= 0,
-		.max_baud	= 0,
-	},
-};
-
-/* uart registration process */
-void __init s5p6442_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	struct s3c2410_uartcfg *tcfg = cfg;
-	u32 ucnt;
-
-	for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
-		if (!tcfg->clocks) {
-			tcfg->clocks = s5p6442_serial_clocks;
-			tcfg->clocks_size = ARRAY_SIZE(s5p6442_serial_clocks);
-		}
-	}
-
-	s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no);
-}
diff --git a/arch/arm/mach-s5p6442/mach-smdk6442.c b/arch/arm/mach-s5p6442/mach-smdk6442.c
deleted file mode 100644
index eaf6b9c..0000000
--- a/arch/arm/mach-s5p6442/mach-smdk6442.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/mach-smdk6442.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/i2c.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-#include <plat/regs-serial.h>
-#include <plat/s5p6442.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/iic.h>
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define SMDK6442_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
-				 S3C2410_UCON_RXILEVEL |	\
-				 S3C2410_UCON_TXIRQMODE |	\
-				 S3C2410_UCON_RXIRQMODE |	\
-				 S3C2410_UCON_RXFIFO_TOI |	\
-				 S3C2443_UCON_RXERR_IRQEN)
-
-#define SMDK6442_ULCON_DEFAULT	S3C2410_LCON_CS8
-
-#define SMDK6442_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
-				 S5PV210_UFCON_TXTRIG4 |	\
-				 S5PV210_UFCON_RXTRIG4)
-
-static struct s3c2410_uartcfg smdk6442_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport		= 0,
-		.flags		= 0,
-		.ucon		= SMDK6442_UCON_DEFAULT,
-		.ulcon		= SMDK6442_ULCON_DEFAULT,
-		.ufcon		= SMDK6442_UFCON_DEFAULT,
-	},
-	[1] = {
-		.hwport		= 1,
-		.flags		= 0,
-		.ucon		= SMDK6442_UCON_DEFAULT,
-		.ulcon		= SMDK6442_ULCON_DEFAULT,
-		.ufcon		= SMDK6442_UFCON_DEFAULT,
-	},
-	[2] = {
-		.hwport		= 2,
-		.flags		= 0,
-		.ucon		= SMDK6442_UCON_DEFAULT,
-		.ulcon		= SMDK6442_ULCON_DEFAULT,
-		.ufcon		= SMDK6442_UFCON_DEFAULT,
-	},
-};
-
-static struct platform_device *smdk6442_devices[] __initdata = {
-	&s3c_device_i2c0,
-	&samsung_asoc_dma,
-	&s5p6442_device_iis0,
-	&s3c_device_wdt,
-};
-
-static struct i2c_board_info smdk6442_i2c_devs0[] __initdata = {
-	{ I2C_BOARD_INFO("wm8580", 0x1b), },
-};
-
-static void __init smdk6442_map_io(void)
-{
-	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
-	s3c24xx_init_clocks(12000000);
-	s3c24xx_init_uarts(smdk6442_uartcfgs, ARRAY_SIZE(smdk6442_uartcfgs));
-}
-
-static void __init smdk6442_machine_init(void)
-{
-	s3c_i2c0_set_platdata(NULL);
-	i2c_register_board_info(0, smdk6442_i2c_devs0,
-			ARRAY_SIZE(smdk6442_i2c_devs0));
-	platform_add_devices(smdk6442_devices, ARRAY_SIZE(smdk6442_devices));
-}
-
-MACHINE_START(SMDK6442, "SMDK6442")
-	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
-	.boot_params	= S5P_PA_SDRAM + 0x100,
-	.init_irq	= s5p6442_init_irq,
-	.map_io		= smdk6442_map_io,
-	.init_machine	= smdk6442_machine_init,
-	.timer		= &s3c24xx_timer,
-MACHINE_END
diff --git a/arch/arm/mach-s5p6442/setup-i2c0.c b/arch/arm/mach-s5p6442/setup-i2c0.c
deleted file mode 100644
index aad8565..0000000
--- a/arch/arm/mach-s5p6442/setup-i2c0.c
+++ /dev/null
@@ -1,28 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/setup-i2c0.c
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * I2C0 GPIO configuration.
- *
- * Based on plat-s3c64xx/setup-i2c0.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/gpio.h>
-
-struct platform_device; /* don't need the contents */
-
-#include <plat/gpio-cfg.h>
-#include <plat/iic.h>
-
-void s3c_i2c0_cfg_gpio(struct platform_device *dev)
-{
-	s3c_gpio_cfgall_range(S5P6442_GPD1(0), 2,
-			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-}
diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
index bf0b024..7c6cb4fa 100644
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -99,8 +99,11 @@ static void sdi0_configure(void)
 	gpio_direction_output(sdi0_vsel, 0);
 	gpio_direction_output(sdi0_en, 1);
 
-	/* Add the device */
-	db8500_add_sdi0(&mop500_sdi0_data);
+	/* Add the device, force v2 to subrevision 1 */
+	if (cpu_is_u8500v2())
+		db8500_add_sdi0(&mop500_sdi0_data, 0x10480180);
+	else
+		db8500_add_sdi0(&mop500_sdi0_data, 0);
 }
 
 void mop500_sdi_tc35892_init(void)
@@ -188,13 +191,18 @@ static struct mmci_platform_data mop500_sdi4_data = {
 
 void __init mop500_sdi_init(void)
 {
+	u32 periphid = 0;
+
+	/* v2 has a new version of this block that need to be forced */
+	if (cpu_is_u8500v2())
+		periphid = 0x10480180;
 	/* PoP:ed eMMC on top of DB8500 v1.0 has problems with high speed */
 	if (!cpu_is_u8500v10())
 		mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED;
-	db8500_add_sdi2(&mop500_sdi2_data);
+	db8500_add_sdi2(&mop500_sdi2_data, periphid);
 
 	/* On-board eMMC */
-	db8500_add_sdi4(&mop500_sdi4_data);
+	db8500_add_sdi4(&mop500_sdi4_data, periphid);
 
 	if (machine_is_hrefv60()) {
 		mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO;
diff --git a/arch/arm/mach-ux500/devices-common.h b/arch/arm/mach-ux500/devices-common.h
index c719b5a1..7825705 100644
--- a/arch/arm/mach-ux500/devices-common.h
+++ b/arch/arm/mach-ux500/devices-common.h
@@ -28,18 +28,20 @@ dbx500_add_msp_spi(const char *name, resource_size_t base, int irq,
 
 static inline struct amba_device *
 dbx500_add_spi(const char *name, resource_size_t base, int irq,
-				   struct spi_master_cntlr *pdata)
+	       struct spi_master_cntlr *pdata,
+	       u32 periphid)
 {
-	return dbx500_add_amba_device(name, base, irq, pdata, 0);
+	return dbx500_add_amba_device(name, base, irq, pdata, periphid);
 }
 
 struct mmci_platform_data;
 
 static inline struct amba_device *
 dbx500_add_sdi(const char *name, resource_size_t base, int irq,
-	       struct mmci_platform_data *pdata)
+	       struct mmci_platform_data *pdata,
+	       u32 periphid)
 {
-	return dbx500_add_amba_device(name, base, irq, pdata, 0);
+	return dbx500_add_amba_device(name, base, irq, pdata, periphid);
 }
 
 struct amba_pl011_data;
diff --git a/arch/arm/mach-ux500/devices-db5500.h b/arch/arm/mach-ux500/devices-db5500.h
index 94627f7..0c4bccd 100644
--- a/arch/arm/mach-ux500/devices-db5500.h
+++ b/arch/arm/mach-ux500/devices-db5500.h
@@ -38,24 +38,34 @@
 	ux500_add_usb(U5500_USBOTG_BASE, IRQ_DB5500_USBOTG, rx_cfg, tx_cfg)
 
 #define db5500_add_sdi0(pdata) \
-	dbx500_add_sdi("sdi0", U5500_SDI0_BASE, IRQ_DB5500_SDMMC0, pdata)
+	dbx500_add_sdi("sdi0", U5500_SDI0_BASE, IRQ_DB5500_SDMMC0, pdata, \
+		       0x10480180)
 #define db5500_add_sdi1(pdata) \
-	dbx500_add_sdi("sdi1", U5500_SDI1_BASE, IRQ_DB5500_SDMMC1, pdata)
+	dbx500_add_sdi("sdi1", U5500_SDI1_BASE, IRQ_DB5500_SDMMC1, pdata, \
+		       0x10480180)
 #define db5500_add_sdi2(pdata) \
-	dbx500_add_sdi("sdi2", U5500_SDI2_BASE, IRQ_DB5500_SDMMC2, pdata)
+	dbx500_add_sdi("sdi2", U5500_SDI2_BASE, IRQ_DB5500_SDMMC2, pdata \
+		       0x10480180)
 #define db5500_add_sdi3(pdata) \
-	dbx500_add_sdi("sdi3", U5500_SDI3_BASE, IRQ_DB5500_SDMMC3, pdata)
+	dbx500_add_sdi("sdi3", U5500_SDI3_BASE, IRQ_DB5500_SDMMC3, pdata \
+		       0x10480180)
 #define db5500_add_sdi4(pdata) \
-	dbx500_add_sdi("sdi4", U5500_SDI4_BASE, IRQ_DB5500_SDMMC4, pdata)
+	dbx500_add_sdi("sdi4", U5500_SDI4_BASE, IRQ_DB5500_SDMMC4, pdata \
+		       0x10480180)
 
+/* This one has a bad peripheral ID in the U5500 silicon */
 #define db5500_add_spi0(pdata) \
-	dbx500_add_spi("spi0", U5500_SPI0_BASE, IRQ_DB5500_SPI0, pdata)
+	dbx500_add_spi("spi0", U5500_SPI0_BASE, IRQ_DB5500_SPI0, pdata, \
+		       0x10080023)
 #define db5500_add_spi1(pdata) \
-	dbx500_add_spi("spi1", U5500_SPI1_BASE, IRQ_DB5500_SPI1, pdata)
+	dbx500_add_spi("spi1", U5500_SPI1_BASE, IRQ_DB5500_SPI1, pdata, \
+		       0x10080023)
 #define db5500_add_spi2(pdata) \
-	dbx500_add_spi("spi2", U5500_SPI2_BASE, IRQ_DB5500_SPI2, pdata)
+	dbx500_add_spi("spi2", U5500_SPI2_BASE, IRQ_DB5500_SPI2, pdata \
+		       0x10080023)
 #define db5500_add_spi3(pdata) \
-	dbx500_add_spi("spi3", U5500_SPI3_BASE, IRQ_DB5500_SPI3, pdata)
+	dbx500_add_spi("spi3", U5500_SPI3_BASE, IRQ_DB5500_SPI3, pdata \
+		       0x10080023)
 
 #define db5500_add_uart0(plat) \
 	dbx500_add_uart("uart0", U5500_UART0_BASE, IRQ_DB5500_UART0, plat)
diff --git a/arch/arm/mach-ux500/devices-db8500.h b/arch/arm/mach-ux500/devices-db8500.h
index 9cc6f8f..cbd4a9a 100644
--- a/arch/arm/mach-ux500/devices-db8500.h
+++ b/arch/arm/mach-ux500/devices-db8500.h
@@ -25,7 +25,7 @@ static inline struct amba_device *
 db8500_add_ssp(const char *name, resource_size_t base, int irq,
 	       struct pl022_ssp_controller *pdata)
 {
-	return dbx500_add_amba_device(name, base, irq, pdata, SSP_PER_ID);
+	return dbx500_add_amba_device(name, base, irq, pdata, 0);
 }
 
 
@@ -64,18 +64,18 @@ db8500_add_ssp(const char *name, resource_size_t base, int irq,
 #define db8500_add_usb(rx_cfg, tx_cfg) \
 	ux500_add_usb(U8500_USBOTG_BASE, IRQ_DB8500_USBOTG, rx_cfg, tx_cfg)
 
-#define db8500_add_sdi0(pdata) \
-	dbx500_add_sdi("sdi0", U8500_SDI0_BASE, IRQ_DB8500_SDMMC0, pdata)
-#define db8500_add_sdi1(pdata) \
-	dbx500_add_sdi("sdi1", U8500_SDI1_BASE, IRQ_DB8500_SDMMC1, pdata)
-#define db8500_add_sdi2(pdata) \
-	dbx500_add_sdi("sdi2", U8500_SDI2_BASE, IRQ_DB8500_SDMMC2, pdata)
-#define db8500_add_sdi3(pdata) \
-	dbx500_add_sdi("sdi3", U8500_SDI3_BASE, IRQ_DB8500_SDMMC3, pdata)
-#define db8500_add_sdi4(pdata) \
-	dbx500_add_sdi("sdi4", U8500_SDI4_BASE, IRQ_DB8500_SDMMC4, pdata)
-#define db8500_add_sdi5(pdata) \
-	dbx500_add_sdi("sdi5", U8500_SDI5_BASE, IRQ_DB8500_SDMMC5, pdata)
+#define db8500_add_sdi0(pdata, pid) \
+	dbx500_add_sdi("sdi0", U8500_SDI0_BASE, IRQ_DB8500_SDMMC0, pdata, pid)
+#define db8500_add_sdi1(pdata, pid) \
+	dbx500_add_sdi("sdi1", U8500_SDI1_BASE, IRQ_DB8500_SDMMC1, pdata, pid)
+#define db8500_add_sdi2(pdata, pid) \
+	dbx500_add_sdi("sdi2", U8500_SDI2_BASE, IRQ_DB8500_SDMMC2, pdata, pid)
+#define db8500_add_sdi3(pdata, pid) \
+	dbx500_add_sdi("sdi3", U8500_SDI3_BASE, IRQ_DB8500_SDMMC3, pdata, pid)
+#define db8500_add_sdi4(pdata, pid) \
+	dbx500_add_sdi("sdi4", U8500_SDI4_BASE, IRQ_DB8500_SDMMC4, pdata, pid)
+#define db8500_add_sdi5(pdata, pid) \
+	dbx500_add_sdi("sdi5", U8500_SDI5_BASE, IRQ_DB8500_SDMMC5, pdata, pid)
 
 #define db8500_add_ssp0(pdata) \
 	db8500_add_ssp("ssp0", U8500_SSP0_BASE, IRQ_DB8500_SSP0, pdata)
@@ -83,13 +83,13 @@ db8500_add_ssp(const char *name, resource_size_t base, int irq,
 	db8500_add_ssp("ssp1", U8500_SSP1_BASE, IRQ_DB8500_SSP1, pdata)
 
 #define db8500_add_spi0(pdata) \
-	dbx500_add_spi("spi0", U8500_SPI0_BASE, IRQ_DB8500_SPI0, pdata)
+	dbx500_add_spi("spi0", U8500_SPI0_BASE, IRQ_DB8500_SPI0, pdata, 0)
 #define db8500_add_spi1(pdata) \
-	dbx500_add_spi("spi1", U8500_SPI1_BASE, IRQ_DB8500_SPI1, pdata)
+	dbx500_add_spi("spi1", U8500_SPI1_BASE, IRQ_DB8500_SPI1, pdata, 0)
 #define db8500_add_spi2(pdata) \
-	dbx500_add_spi("spi2", U8500_SPI2_BASE, IRQ_DB8500_SPI2, pdata)
+	dbx500_add_spi("spi2", U8500_SPI2_BASE, IRQ_DB8500_SPI2, pdata, 0)
 #define db8500_add_spi3(pdata) \
-	dbx500_add_spi("spi3", U8500_SPI3_BASE, IRQ_DB8500_SPI3, pdata)
+	dbx500_add_spi("spi3", U8500_SPI3_BASE, IRQ_DB8500_SPI3, pdata, 0)
 
 #define db8500_add_uart0(pdata) \
 	dbx500_add_uart("uart0", U8500_UART0_BASE, IRQ_DB8500_UART0, pdata)
diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h
index 2c6f710..470ac52 100644
--- a/arch/arm/mach-ux500/include/mach/hardware.h
+++ b/arch/arm/mach-ux500/include/mach/hardware.h
@@ -29,9 +29,6 @@
 #include <mach/db8500-regs.h>
 #include <mach/db5500-regs.h>
 
-/* ST-Ericsson modified pl022 id */
-#define SSP_PER_ID		0x01080022
-
 #ifndef __ASSEMBLY__
 
 #include <mach/id.h>
diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S
index c96fa1b..73b4a8b 100644
--- a/arch/arm/mm/cache-v6.S
+++ b/arch/arm/mm/cache-v6.S
@@ -176,6 +176,7 @@ ENDPROC(v6_coherent_kern_range)
  */
 ENTRY(v6_flush_kern_dcache_area)
 	add	r1, r0, r1
+	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
 1:
 #ifdef HARVARD_CACHE
 	mcr	p15, 0, r0, c7, c14, 1		@ clean & invalidate D line
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index dc18d81..d32f02b 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -221,6 +221,8 @@ ENDPROC(v7_coherent_user_range)
 ENTRY(v7_flush_kern_dcache_area)
 	dcache_line_size r2, r3
 	add	r1, r0, r1
+	sub	r3, r2, #1
+	bic	r0, r0, r3
 1:
 	mcr	p15, 0, r0, c7, c14, 1		@ clean & invalidate D line / unified line
 	add	r0, r0, r2
diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c
index b0ee9ba..8bfae96 100644
--- a/arch/arm/mm/context.c
+++ b/arch/arm/mm/context.c
@@ -24,9 +24,7 @@ DEFINE_PER_CPU(struct mm_struct *, current_mm);
 
 /*
  * We fork()ed a process, and we need a new context for the child
- * to run in.  We reserve version 0 for initial tasks so we will
- * always allocate an ASID. The ASID 0 is reserved for the TTBR
- * register changing sequence.
+ * to run in.
  */
 void __init_new_context(struct task_struct *tsk, struct mm_struct *mm)
 {
@@ -36,8 +34,11 @@ void __init_new_context(struct task_struct *tsk, struct mm_struct *mm)
 
 static void flush_context(void)
 {
-	/* set the reserved ASID before flushing the TLB */
-	asm("mcr	p15, 0, %0, c13, c0, 1\n" : : "r" (0));
+	u32 ttb;
+	/* Copy TTBR1 into TTBR0 */
+	asm volatile("mrc	p15, 0, %0, c2, c0, 1\n"
+		     "mcr	p15, 0, %0, c2, c0, 0"
+		     : "=r" (ttb));
 	isb();
 	local_flush_tlb_all();
 	if (icache_is_vivt_asid_tagged()) {
@@ -93,7 +94,7 @@ static void reset_context(void *info)
 		return;
 
 	smp_rmb();
-	asid = cpu_last_asid + cpu + 1;
+	asid = cpu_last_asid + cpu;
 
 	flush_context();
 	set_mm_context(mm, asid);
@@ -143,13 +144,13 @@ void __new_context(struct mm_struct *mm)
 	 * to start a new version and flush the TLB.
 	 */
 	if (unlikely((asid & ~ASID_MASK) == 0)) {
-		asid = cpu_last_asid + smp_processor_id() + 1;
+		asid = cpu_last_asid + smp_processor_id();
 		flush_context();
 #ifdef CONFIG_SMP
 		smp_wmb();
 		smp_call_function(reset_context, NULL, 1);
 #endif
-		cpu_last_asid += NR_CPUS;
+		cpu_last_asid += NR_CPUS - 1;
 	}
 
 	set_mm_context(mm, asid);
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 3f17ea1..2c2cce9 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -15,12 +15,14 @@
 #include <linux/mman.h>
 #include <linux/nodemask.h>
 #include <linux/initrd.h>
+#include <linux/of_fdt.h>
 #include <linux/highmem.h>
 #include <linux/gfp.h>
 #include <linux/memblock.h>
 #include <linux/sort.h>
 
 #include <asm/mach-types.h>
+#include <asm/prom.h>
 #include <asm/sections.h>
 #include <asm/setup.h>
 #include <asm/sizes.h>
@@ -71,6 +73,14 @@ static int __init parse_tag_initrd2(const struct tag *tag)
 
 __tagtable(ATAG_INITRD2, parse_tag_initrd2);
 
+#ifdef CONFIG_OF_FLATTREE
+void __init early_init_dt_setup_initrd_arch(unsigned long start, unsigned long end)
+{
+	phys_initrd_start = start;
+	phys_initrd_size = end - start;
+}
+#endif /* CONFIG_OF_FLATTREE */
+
 /*
  * This keeps memory configuration data used by a couple memory
  * initialization functions, as well as show_mem() for the skipping
@@ -273,13 +283,15 @@ static void __init arm_bootmem_free(unsigned long min, unsigned long max_low,
 	free_area_init_node(0, zone_size, min, zhole_size);
 }
 
-#ifndef CONFIG_SPARSEMEM
+#ifdef CONFIG_HAVE_ARCH_PFN_VALID
 int pfn_valid(unsigned long pfn)
 {
 	return memblock_is_memory(pfn << PAGE_SHIFT);
 }
 EXPORT_SYMBOL(pfn_valid);
+#endif
 
+#ifndef CONFIG_SPARSEMEM
 static void arm_memory_present(void)
 {
 }
@@ -334,6 +346,7 @@ void __init arm_memblock_init(struct meminfo *mi, struct machine_desc *mdesc)
 #endif
 
 	arm_mm_memblock_reserve();
+	arm_dt_memblock_reserve();
 
 	/* reserve any platform specific memblock areas */
 	if (mdesc->reserve)
diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h
index d238410..5b3d7d5 100644
--- a/arch/arm/mm/mm.h
+++ b/arch/arm/mm/mm.h
@@ -5,14 +5,9 @@ extern pmd_t *top_pmd;
 
 #define TOP_PTE(x)	pte_offset_kernel(top_pmd, x)
 
-static inline pmd_t *pmd_off(pgd_t *pgd, unsigned long virt)
-{
-	return pmd_offset(pud_offset(pgd, virt), virt);
-}
-
 static inline pmd_t *pmd_off_k(unsigned long virt)
 {
-	return pmd_off(pgd_offset_k(virt), virt);
+	return pmd_offset(pud_offset(pgd_offset_k(virt), virt), virt);
 }
 
 struct mem_type {
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 08a9236..9d9e736 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -763,15 +763,12 @@ static void __init sanity_check_meminfo(void)
 {
 	int i, j, highmem = 0;
 
-	lowmem_limit = __pa(vmalloc_min - 1) + 1;
-	memblock_set_current_limit(lowmem_limit);
-
 	for (i = 0, j = 0; i < meminfo.nr_banks; i++) {
 		struct membank *bank = &meminfo.bank[j];
 		*bank = meminfo.bank[i];
 
 #ifdef CONFIG_HIGHMEM
-		if (__va(bank->start) > vmalloc_min ||
+		if (__va(bank->start) >= vmalloc_min ||
 		    __va(bank->start) < (void *)PAGE_OFFSET)
 			highmem = 1;
 
@@ -829,6 +826,9 @@ static void __init sanity_check_meminfo(void)
 			bank->size = newsize;
 		}
 #endif
+		if (!bank->highmem && bank->start + bank->size > lowmem_limit)
+			lowmem_limit = bank->start + bank->size;
+
 		j++;
 	}
 #ifdef CONFIG_HIGHMEM
@@ -852,6 +852,7 @@ static void __init sanity_check_meminfo(void)
 	}
 #endif
 	meminfo.nr_banks = j;
+	memblock_set_current_limit(lowmem_limit);
 }
 
 static inline void prepare_page_table(void)
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index ab17cc0..1d2b845 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -213,7 +213,9 @@ __v6_setup:
 	mcr	p15, 0, r0, c2, c0, 2		@ TTB control register
 	ALT_SMP(orr	r4, r4, #TTB_FLAGS_SMP)
 	ALT_UP(orr	r4, r4, #TTB_FLAGS_UP)
-	mcr	p15, 0, r4, c2, c0, 1		@ load TTB1
+	ALT_SMP(orr	r8, r8, #TTB_FLAGS_SMP)
+	ALT_UP(orr	r8, r8, #TTB_FLAGS_UP)
+	mcr	p15, 0, r8, c2, c0, 1		@ load TTB1
 #endif /* CONFIG_MMU */
 	adr	r5, v6_crval
 	ldmia	r5, {r5, r6}
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index babfba09..b3b566e 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -108,18 +108,16 @@ ENTRY(cpu_v7_switch_mm)
 #ifdef CONFIG_ARM_ERRATA_430973
 	mcr	p15, 0, r2, c7, c5, 6		@ flush BTAC/BTB
 #endif
-#ifdef CONFIG_ARM_ERRATA_754322
-	dsb
-#endif
-	mcr	p15, 0, r2, c13, c0, 1		@ set reserved context ID
-	isb
-1:	mcr	p15, 0, r0, c2, c0, 0		@ set TTB 0
+	mrc	p15, 0, r2, c2, c0, 1		@ load TTB 1
+	mcr	p15, 0, r2, c2, c0, 0		@ into TTB 0
 	isb
 #ifdef CONFIG_ARM_ERRATA_754322
 	dsb
 #endif
 	mcr	p15, 0, r1, c13, c0, 1		@ set context ID
 	isb
+	mcr	p15, 0, r0, c2, c0, 0		@ set TTB 0
+	isb
 #endif
 	mov	pc, lr
 ENDPROC(cpu_v7_switch_mm)
@@ -368,7 +366,9 @@ __v7_setup:
 	mcr	p15, 0, r10, c2, c0, 2		@ TTB control register
 	ALT_SMP(orr	r4, r4, #TTB_FLAGS_SMP)
 	ALT_UP(orr	r4, r4, #TTB_FLAGS_UP)
-	mcr	p15, 0, r4, c2, c0, 1		@ load TTB1
+	ALT_SMP(orr	r8, r8, #TTB_FLAGS_SMP)
+	ALT_UP(orr	r8, r8, #TTB_FLAGS_UP)
+	mcr	p15, 0, r8, c2, c0, 1		@ load TTB1
 	ldr	r5, =PRRR			@ PRRR
 	ldr	r6, =NMRR			@ NMRR
 	mcr	p15, 0, r5, c10, c2, 0		@ write PRRR
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
index 6751bcf..e98f5c5 100644
--- a/arch/arm/plat-s5p/Kconfig
+++ b/arch/arm/plat-s5p/Kconfig
@@ -7,7 +7,7 @@
 
 config PLAT_S5P
 	bool
-	depends on (ARCH_S5P64X0 || ARCH_S5P6442 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS4)
+	depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS4)
 	default y
 	select ARM_VIC if !ARCH_EXYNOS4
 	select ARM_GIC if ARCH_EXYNOS4
diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c
index 5cf5e72..bbc2aa7 100644
--- a/arch/arm/plat-s5p/cpu.c
+++ b/arch/arm/plat-s5p/cpu.c
@@ -21,7 +21,6 @@
 
 #include <plat/cpu.h>
 #include <plat/s5p6440.h>
-#include <plat/s5p6442.h>
 #include <plat/s5p6450.h>
 #include <plat/s5pc100.h>
 #include <plat/s5pv210.h>
@@ -30,7 +29,6 @@
 /* table of supported CPUs */
 
 static const char name_s5p6440[] = "S5P6440";
-static const char name_s5p6442[] = "S5P6442";
 static const char name_s5p6450[] = "S5P6450";
 static const char name_s5pc100[] = "S5PC100";
 static const char name_s5pv210[] = "S5PV210/S5PC110";
@@ -46,14 +44,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.init		= s5p64x0_init,
 		.name		= name_s5p6440,
 	}, {
-		.idcode		= 0x36442000,
-		.idmask		= 0xfffff000,
-		.map_io		= s5p6442_map_io,
-		.init_clocks	= s5p6442_init_clocks,
-		.init_uarts	= s5p6442_init_uarts,
-		.init		= s5p6442_init,
-		.name		= name_s5p6442,
-	}, {
 		.idcode		= 0x36450000,
 		.idmask		= 0xfffff000,
 		.map_io		= s5p6450_map_io,
diff --git a/arch/arm/plat-s5p/include/plat/s5p6442.h b/arch/arm/plat-s5p/include/plat/s5p6442.h
deleted file mode 100644
index 7b88013..0000000
--- a/arch/arm/plat-s5p/include/plat/s5p6442.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* arch/arm/plat-s5p/include/plat/s5p6442.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * Header file for s5p6442 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* Common init code for S5P6442 related SoCs */
-
-extern void s5p6442_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s5p6442_register_clocks(void);
-extern void s5p6442_setup_clocks(void);
-
-#ifdef CONFIG_CPU_S5P6442
-
-extern  int s5p6442_init(void);
-extern void s5p6442_init_irq(void);
-extern void s5p6442_map_io(void);
-extern void s5p6442_init_clocks(int xtal);
-
-#define s5p6442_init_uarts s5p6442_common_init_uarts
-
-#else
-#define s5p6442_init_clocks NULL
-#define s5p6442_init_uarts NULL
-#define s5p6442_map_io NULL
-#define s5p6442_init NULL
-#endif
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index 3aedac0..c0a5741 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -86,7 +86,6 @@ extern struct sysdev_class s3c2443_sysclass;
 extern struct sysdev_class s3c6410_sysclass;
 extern struct sysdev_class s3c64xx_sysclass;
 extern struct sysdev_class s5p64x0_sysclass;
-extern struct sysdev_class s5p6442_sysclass;
 extern struct sysdev_class s5pv210_sysclass;
 extern struct sysdev_class exynos4_sysclass;
 
diff --git a/arch/arm/plat-samsung/include/plat/debug-macro.S b/arch/arm/plat-samsung/include/plat/debug-macro.S
index dc6efd9..207e275 100644
--- a/arch/arm/plat-samsung/include/plat/debug-macro.S
+++ b/arch/arm/plat-samsung/include/plat/debug-macro.S
@@ -11,7 +11,7 @@
 
 #include <plat/regs-serial.h>
 
-/* The S5PV210/S5PC110 and S5P6442 implementations are as belows. */
+/* The S5PV210/S5PC110 implementations are as belows. */
 
 	.macro fifo_level_s5pv210 rd, rx
 		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
index 39818d8..b61b8ee 100644
--- a/arch/arm/plat-samsung/include/plat/devs.h
+++ b/arch/arm/plat-samsung/include/plat/devs.h
@@ -111,12 +111,6 @@ extern struct platform_device exynos4_device_spdif;
 extern struct platform_device exynos4_device_pd[];
 extern struct platform_device exynos4_device_ahci;
 
-extern struct platform_device s5p6442_device_pcm0;
-extern struct platform_device s5p6442_device_pcm1;
-extern struct platform_device s5p6442_device_iis0;
-extern struct platform_device s5p6442_device_iis1;
-extern struct platform_device s5p6442_device_spi;
-
 extern struct platform_device s5p6440_device_pcm;
 extern struct platform_device s5p6440_device_iis;
 
diff --git a/arch/arm/plat-samsung/include/plat/regs-serial.h b/arch/arm/plat-samsung/include/plat/regs-serial.h
index 788837e9..c151c5f 100644
--- a/arch/arm/plat-samsung/include/plat/regs-serial.h
+++ b/arch/arm/plat-samsung/include/plat/regs-serial.h
@@ -194,7 +194,7 @@
 #define S3C64XX_UINTSP		0x34
 #define S3C64XX_UINTM		0x38
 
-/* Following are specific to S5PV210 and S5P6442 */
+/* Following are specific to S5PV210 */
 #define S5PV210_UCON_CLKMASK	(1<<10)
 #define S5PV210_UCON_PCLK	(0<<10)
 #define S5PV210_UCON_UCLK	(1<<10)
diff --git a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
index ff1a561..0ffe34a 100644
--- a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
+++ b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
@@ -69,6 +69,5 @@ extern void s3c64xx_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
 extern void s5pc100_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
 extern void s5pv210_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
 extern void s5p64x0_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
-extern void s5p6442_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
 
 #endif /* __S3C64XX_PLAT_SPI_H */
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index bfc9d07..aa677e2 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -1014,6 +1014,7 @@ static struct platform_device *__initdata at32_usarts[4];
 void __init at32_map_usart(unsigned int hw_id, unsigned int line, int flags)
 {
 	struct platform_device *pdev;
+	struct atmel_uart_data *pdata;
 
 	switch (hw_id) {
 	case 0:
@@ -1042,7 +1043,8 @@ void __init at32_map_usart(unsigned int hw_id, unsigned int line, int flags)
 		data->regs = (void __iomem *)pdev->resource[0].start;
 	}
 
-	pdev->id = line;
+	pdata = pdev->dev.platform_data;
+	pdata->num = portnr;
 	at32_usarts[line] = pdev;
 }
 
diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h
index 6174020..679458d 100644
--- a/arch/avr32/mach-at32ap/include/mach/board.h
+++ b/arch/avr32/mach-at32ap/include/mach/board.h
@@ -33,6 +33,7 @@ extern struct platform_device *atmel_default_console_device;
 #define	ATMEL_USART_CLK		0x04
 
 struct atmel_uart_data {
+	int		num;		/* port num */
 	short		use_dma_tx;	/* use transmit DMA? */
 	short		use_dma_rx;	/* use receive DMA? */
 	void __iomem	*regs;		/* virtual base address, if any */
diff --git a/arch/microblaze/kernel/prom.c b/arch/microblaze/kernel/prom.c
index 00ee90f..b15cc21 100644
--- a/arch/microblaze/kernel/prom.c
+++ b/arch/microblaze/kernel/prom.c
@@ -130,7 +130,7 @@ void __init early_init_devtree(void *params)
 	 * device-tree, including the platform type, initrd location and
 	 * size, TCE reserve, and more ...
 	 */
-	of_scan_flat_dt(early_init_dt_scan_chosen, NULL);
+	of_scan_flat_dt(early_init_dt_scan_chosen, cmd_line);
 
 	/* Scan memory nodes and rebuild MEMBLOCKs */
 	memblock_init();
diff --git a/arch/mips/include/asm/prom.h b/arch/mips/include/asm/prom.h
index f29b862..857d9b7 100644
--- a/arch/mips/include/asm/prom.h
+++ b/arch/mips/include/asm/prom.h
@@ -14,9 +14,6 @@
 #ifdef CONFIG_OF
 #include <asm/bootinfo.h>
 
-/* which is compatible with the flattened device tree (FDT) */
-#define cmd_line arcs_cmdline
-
 extern int early_init_dt_scan_memory_arch(unsigned long node,
 	const char *uname, int depth, void *data);
 
diff --git a/arch/mips/kernel/prom.c b/arch/mips/kernel/prom.c
index a19811e9..5b7eade4 100644
--- a/arch/mips/kernel/prom.c
+++ b/arch/mips/kernel/prom.c
@@ -83,7 +83,8 @@ void __init early_init_devtree(void *params)
 	 * device-tree, including the platform type, initrd location and
 	 * size, and more ...
 	 */
-	of_scan_flat_dt(early_init_dt_scan_chosen, NULL);
+	of_scan_flat_dt(early_init_dt_scan_chosen, arcs_cmdline);
+
 
 	/* Scan memory nodes */
 	of_scan_flat_dt(early_init_dt_scan_root, NULL);
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 48aeb55..f2c906b 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -694,7 +694,7 @@ void __init early_init_devtree(void *params)
 	 * device-tree, including the platform type, initrd location and
 	 * size, TCE reserve, and more ...
 	 */
-	of_scan_flat_dt(early_init_dt_scan_chosen_ppc, NULL);
+	of_scan_flat_dt(early_init_dt_scan_chosen_ppc, cmd_line);
 
 	/* Scan memory nodes and rebuild MEMBLOCKs */
 	memblock_init();
author	Linus Torvalds <torvalds@linux-foundation.org>	2011-05-27 19:51:32 -0700
committer	Linus Torvalds <torvalds@linux-foundation.org>	2011-05-27 19:51:32 -0700
commit	2a56d2220284b0e4dd8569fa475d7053f1c40a63 (patch)
tree	96f959486a2f31db599e5f97167074bd1ecb3dc6 /arch
parent	46f2cc80514e389bacfb642a32a4181fa1f1d20b (diff)
parent	239df0fd5ee25588f8a5ba7f7ee646940cc403f4 (diff)
download	op-kernel-dev-2a56d2220284b0e4dd8569fa475d7053f1c40a63.zip op-kernel-dev-2a56d2220284b0e4dd8569fa475d7053f1c40a63.tar.gz