Merge branch 'devel-board' into omap-for-linus

57 files changed, 798 insertions, 528 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index f1d9297..d56d21c 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1311,7 +1311,7 @@ config HZ
 
 config THUMB2_KERNEL
 	bool "Compile the kernel in Thumb-2 mode"
-	depends on CPU_V7 && EXPERIMENTAL
+	depends on CPU_V7 && !CPU_V6 && EXPERIMENTAL
 	select AEABI
 	select ARM_ASM_UNIFIED
 	help
@@ -1759,7 +1759,7 @@ comment "At least one emulation must be selected"
 
 config FPE_NWFPE
 	bool "NWFPE math emulation"
-	depends on !AEABI || OABI_COMPAT
+	depends on (!AEABI || OABI_COMPAT) && !THUMB2_KERNEL
 	---help---
 	  Say Y to include the NWFPE floating point emulator in the kernel.
 	  This is necessary to run most binaries. Linux does not currently
diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c
index daf3993..2e3dd08 100644
--- a/arch/arm/mach-mmp/mmp2.c
+++ b/arch/arm/mach-mmp/mmp2.c
@@ -126,7 +126,6 @@ static APBC_CLK(twsi3, MMP2_TWSI3, 0, 26000000);
 static APBC_CLK(twsi4, MMP2_TWSI4, 0, 26000000);
 static APBC_CLK(twsi5, MMP2_TWSI5, 0, 26000000);
 static APBC_CLK(twsi6, MMP2_TWSI6, 0, 26000000);
-static APBC_CLK(rtc, MMP2_RTC, 0, 32768);
 
 static APMU_CLK(nand, NAND, 0xbf, 100000000);
 
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 144e7bb..925ccb3 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -220,6 +220,12 @@ config MACH_NOKIA_N8X0
 	select MACH_NOKIA_N810
 	select MACH_NOKIA_N810_WIMAX
 
+config MACH_NOKIA_RM680
+	bool "Nokia RM-680 board"
+	depends on ARCH_OMAP3
+	default y
+	select OMAP_PACKAGE_CBB
+
 config MACH_NOKIA_RX51
 	bool "Nokia RX-51 board"
 	depends on ARCH_OMAP3
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index fbc8739..25bc945 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -140,8 +140,11 @@ obj-$(CONFIG_MACH_OMAP_3430SDP)		+= board-3430sdp.o \
 					   hsmmc.o \
 					   board-flash.o
 obj-$(CONFIG_MACH_NOKIA_N8X0)		+= board-n8x0.o
+obj-$(CONFIG_MACH_NOKIA_RM680)		+= board-rm680.o \
+					   sdram-nokia.o \
+					   hsmmc.o
 obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o \
-					   board-rx51-sdram.o \
+					   sdram-nokia.o \
 					   board-rx51-peripherals.o \
 					   board-rx51-video.o \
 					   hsmmc.o
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
new file mode 100644
index 0000000..8da65bd
--- /dev/null
+++ b/arch/arm/mach-omap2/board-rm680.c
@@ -0,0 +1,186 @@
+/*
+ * Board support file for Nokia RM-680.
+ *
+ * Copyright (C) 2010 Nokia
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/i2c/twl.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/consumer.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <plat/i2c.h>
+#include <plat/mmc.h>
+#include <plat/usb.h>
+#include <plat/gpmc.h>
+#include <plat/common.h>
+#include <plat/onenand.h>
+
+#include "mux.h"
+#include "hsmmc.h"
+#include "sdram-nokia.h"
+
+static struct regulator_consumer_supply rm680_vemmc_consumers[] = {
+	REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1"),
+};
+
+/* Fixed regulator for internal eMMC */
+static struct regulator_init_data rm680_vemmc = {
+	.constraints =	{
+		.name			= "rm680_vemmc",
+		.min_uV			= 2900000,
+		.max_uV			= 2900000,
+		.apply_uV		= 1,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_STATUS
+					| REGULATOR_CHANGE_MODE,
+	},
+	.num_consumer_supplies		= ARRAY_SIZE(rm680_vemmc_consumers),
+	.consumer_supplies		= rm680_vemmc_consumers,
+};
+
+static struct fixed_voltage_config rm680_vemmc_config = {
+	.supply_name		= "VEMMC",
+	.microvolts		= 2900000,
+	.gpio			= 157,
+	.startup_delay		= 150,
+	.enable_high		= 1,
+	.init_data		= &rm680_vemmc,
+};
+
+static struct platform_device rm680_vemmc_device = {
+	.name			= "reg-fixed-voltage",
+	.dev			= {
+		.platform_data	= &rm680_vemmc_config,
+	},
+};
+
+static struct platform_device *rm680_peripherals_devices[] __initdata = {
+	&rm680_vemmc_device,
+};
+
+/* TWL */
+static struct twl4030_gpio_platform_data rm680_gpio_data = {
+	.gpio_base		= OMAP_MAX_GPIO_LINES,
+	.irq_base		= TWL4030_GPIO_IRQ_BASE,
+	.irq_end		= TWL4030_GPIO_IRQ_END,
+	.pullups		= BIT(0),
+	.pulldowns		= BIT(1) | BIT(2) | BIT(8) | BIT(15),
+};
+
+static struct twl4030_usb_data rm680_usb_data = {
+	.usb_mode		= T2_USB_MODE_ULPI,
+};
+
+static struct twl4030_platform_data rm680_twl_data = {
+	.irq_base		= TWL4030_IRQ_BASE,
+	.irq_end		= TWL4030_IRQ_END,
+	.gpio			= &rm680_gpio_data,
+	.usb			= &rm680_usb_data,
+	/* add rest of the children here */
+};
+
+static struct i2c_board_info __initdata rm680_twl_i2c_board_info[] = {
+	{
+		I2C_BOARD_INFO("twl5031", 0x48),
+		.flags		= I2C_CLIENT_WAKE,
+		.irq		= INT_34XX_SYS_NIRQ,
+		.platform_data	= &rm680_twl_data,
+	},
+};
+
+static void __init rm680_i2c_init(void)
+{
+	omap_register_i2c_bus(1, 2900, rm680_twl_i2c_board_info,
+				ARRAY_SIZE(rm680_twl_i2c_board_info));
+	omap_register_i2c_bus(2, 400, NULL, 0);
+	omap_register_i2c_bus(3, 400, NULL, 0);
+}
+
+#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
+	defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+static struct omap_onenand_platform_data board_onenand_data[] = {
+	{
+		.gpio_irq	= 65,
+		.flags		= ONENAND_SYNC_READWRITE,
+	}
+};
+#endif
+
+/* eMMC */
+static struct omap2_hsmmc_info mmc[] __initdata = {
+	{
+		.name		= "internal",
+		.mmc		= 2,
+		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL,
+	},
+	{ /* Terminator */ }
+};
+
+static void __init rm680_peripherals_init(void)
+{
+	platform_add_devices(rm680_peripherals_devices,
+				ARRAY_SIZE(rm680_peripherals_devices));
+	rm680_i2c_init();
+	gpmc_onenand_init(board_onenand_data);
+	omap2_hsmmc_init(mmc);
+}
+
+static void __init rm680_init_irq(void)
+{
+	struct omap_sdrc_params *sdrc_params;
+
+	sdrc_params = nokia_get_sdram_timings();
+	omap2_init_common_hw(sdrc_params, sdrc_params);
+	omap_init_irq();
+}
+
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#endif
+
+static struct omap_musb_board_data rm680_musb_data = {
+	.interface_type	= MUSB_INTERFACE_ULPI,
+	.mode		= MUSB_PERIPHERAL,
+	.power		= 100,
+};
+
+static void __init rm680_init(void)
+{
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+	omap_serial_init();
+	usb_musb_init(&rm680_musb_data);
+	rm680_peripherals_init();
+}
+
+static void __init rm680_map_io(void)
+{
+	omap2_set_globals_3xxx();
+	omap34xx_map_common_io();
+}
+
+MACHINE_START(NOKIA_RM680, "Nokia RM-680 board")
+	.boot_params	= 0x80000100,
+	.map_io		= rm680_map_io,
+	.reserve	= omap_reserve,
+	.init_irq	= rm680_init_irq,
+	.init_machine	= rm680_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 6635142..7362c91 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -32,10 +32,10 @@
 
 #include "mux.h"
 #include "pm.h"
+#include "sdram-nokia.h"
 
 #define RX51_GPIO_SLEEP_IND 162
 
-struct omap_sdrc_params *rx51_get_sdram_timings(void);
 extern void rx51_video_mem_init(void);
 
 static struct gpio_led gpio_leds[] = {
@@ -105,7 +105,7 @@ static void __init rx51_init_irq(void)
 	omap_board_config = rx51_config;
 	omap_board_config_size = ARRAY_SIZE(rx51_config);
 	omap3_pm_init_cpuidle(rx51_cpuidle_params);
-	sdrc_params = rx51_get_sdram_timings();
+	sdrc_params = nokia_get_sdram_timings();
 	omap2_init_common_hw(sdrc_params, sdrc_params);
 	omap_init_irq();
 }
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index 86c9b21..9db9203 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -216,7 +216,7 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
 	{
 		.name		= "wl1271",
 		.mmc		= 3,
-		.caps		= MMC_CAP_4_BIT_DATA,
+		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
 		.gpio_wp	= -EINVAL,
 		.gpio_cd	= -EINVAL,
 		.nonremovable	= true,
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 5347741..4605d50 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -298,7 +298,7 @@ static int __init _omap2_init_reprogram_sdrc(void)
 		return 0;
 
 	dpll3_m2_ck = clk_get(NULL, "dpll3_m2_ck");
-	if (!dpll3_m2_ck)
+	if (IS_ERR(dpll3_m2_ck))
 		return -EINVAL;
 
 	rate = clk_get_rate(dpll3_m2_ck);
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index 5e81517..a8afb61 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -161,6 +161,23 @@ void omap2_pm_dump(int mode, int resume, unsigned int us)
 		printk(KERN_INFO "%-20s: 0x%08x\n", regs[i].name, regs[i].val);
 }
 
+void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds)
+{
+	u32 tick_rate, cycles;
+
+	if (!seconds && !milliseconds)
+		return;
+
+	tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup));
+	cycles = tick_rate * seconds + tick_rate * milliseconds / 1000;
+	omap_dm_timer_stop(gptimer_wakeup);
+	omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles);
+
+	pr_info("PM: Resume timer in %u.%03u secs"
+		" (%d ticks at %d ticks/sec.)\n",
+		seconds, milliseconds, cycles, tick_rate);
+}
+
 #ifdef CONFIG_DEBUG_FS
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
@@ -354,23 +371,6 @@ void pm_dbg_update_time(struct powerdomain *pwrdm, int prev)
 	pwrdm->timer = t;
 }
 
-void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds)
-{
-	u32 tick_rate, cycles;
-
-	if (!seconds && !milliseconds)
-		return;
-
-	tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup));
-	cycles = tick_rate * seconds + tick_rate * milliseconds / 1000;
-	omap_dm_timer_stop(gptimer_wakeup);
-	omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles);
-
-	pr_info("PM: Resume timer in %u.%03u secs"
-		" (%d ticks at %d ticks/sec.)\n",
-		seconds, milliseconds, cycles, tick_rate);
-}
-
 static int clkdm_dbg_show_counter(struct clockdomain *clkdm, void *user)
 {
 	struct seq_file *s = (struct seq_file *)user;
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index c85923e..aaeea49 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -53,6 +53,19 @@
 #include <plat/powerdomain.h>
 #include <plat/clockdomain.h>
 
+#ifdef CONFIG_SUSPEND
+static suspend_state_t suspend_state = PM_SUSPEND_ON;
+static inline bool is_suspending(void)
+{
+	return (suspend_state != PM_SUSPEND_ON);
+}
+#else
+static inline bool is_suspending(void)
+{
+	return false;
+}
+#endif
+
 static void (*omap2_sram_idle)(void);
 static void (*omap2_sram_suspend)(u32 dllctrl, void __iomem *sdrc_dlla_ctrl,
 				  void __iomem *sdrc_power);
@@ -120,8 +133,9 @@ static void omap2_enter_full_retention(void)
 		goto no_sleep;
 
 	/* Block console output in case it is on one of the OMAP UARTs */
-	if (try_acquire_console_sem())
-		goto no_sleep;
+	if (!is_suspending())
+		if (try_acquire_console_sem())
+			goto no_sleep;
 
 	omap_uart_prepare_idle(0);
 	omap_uart_prepare_idle(1);
@@ -136,7 +150,8 @@ static void omap2_enter_full_retention(void)
 	omap_uart_resume_idle(1);
 	omap_uart_resume_idle(0);
 
-	release_console_sem();
+	if (!is_suspending())
+		release_console_sem();
 
 no_sleep:
 	if (omap2_pm_debug) {
@@ -284,6 +299,12 @@ out:
 	local_irq_enable();
 }
 
+static int omap2_pm_begin(suspend_state_t state)
+{
+	suspend_state = state;
+	return 0;
+}
+
 static int omap2_pm_prepare(void)
 {
 	/* We cannot sleep in idle until we have resumed */
@@ -333,10 +354,17 @@ static void omap2_pm_finish(void)
 	enable_hlt();
 }
 
+static void omap2_pm_end(void)
+{
+	suspend_state = PM_SUSPEND_ON;
+}
+
 static struct platform_suspend_ops omap_pm_ops = {
+	.begin		= omap2_pm_begin,
 	.prepare	= omap2_pm_prepare,
 	.enter		= omap2_pm_enter,
 	.finish		= omap2_pm_finish,
+	.end		= omap2_pm_end,
 	.valid		= suspend_valid_only_mem,
 };
 
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 0ec8a04..648b8c5 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -50,6 +50,19 @@
 #include "sdrc.h"
 #include "control.h"
 
+#ifdef CONFIG_SUSPEND
+static suspend_state_t suspend_state = PM_SUSPEND_ON;
+static inline bool is_suspending(void)
+{
+	return (suspend_state != PM_SUSPEND_ON);
+}
+#else
+static inline bool is_suspending(void)
+{
+	return false;
+}
+#endif
+
 /* Scratchpad offsets */
 #define OMAP343X_TABLE_ADDRESS_OFFSET	   0xc4
 #define OMAP343X_TABLE_VALUE_OFFSET	   0xc0
@@ -387,10 +400,11 @@ void omap_sram_idle(void)
 	}
 
 	/* Block console output in case it is on one of the OMAP UARTs */
-	if (per_next_state < PWRDM_POWER_ON ||
-	    core_next_state < PWRDM_POWER_ON)
-		if (try_acquire_console_sem())
-			goto console_still_active;
+	if (!is_suspending())
+		if (per_next_state < PWRDM_POWER_ON ||
+		    core_next_state < PWRDM_POWER_ON)
+			if (try_acquire_console_sem())
+				goto console_still_active;
 
 	/* PER */
 	if (per_next_state < PWRDM_POWER_ON) {
@@ -470,7 +484,8 @@ void omap_sram_idle(void)
 		omap_uart_resume_idle(3);
 	}
 
-	release_console_sem();
+	if (!is_suspending())
+		release_console_sem();
 
 console_still_active:
 	/* Disable IO-PAD and IO-CHAIN wakeup */
@@ -514,8 +529,6 @@ out:
 }
 
 #ifdef CONFIG_SUSPEND
-static suspend_state_t suspend_state;
-
 static int omap3_pm_prepare(void)
 {
 	disable_hlt();
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index 298a22a..f81acee 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -243,13 +243,14 @@
 #define OMAP24XX_EN_GPT1_MASK				(1 << 0)
 
 /* PM_WKST_WKUP, CM_IDLEST_WKUP shared bits */
-#define OMAP24XX_ST_GPIOS_SHIFT				(1 << 2)
-#define OMAP24XX_ST_GPIOS_MASK				2
-#define OMAP24XX_ST_GPT1_SHIFT				(1 << 0)
-#define OMAP24XX_ST_GPT1_MASK				0
+#define OMAP24XX_ST_GPIOS_SHIFT				2
+#define OMAP24XX_ST_GPIOS_MASK				(1 << 2)
+#define OMAP24XX_ST_GPT1_SHIFT				0
+#define OMAP24XX_ST_GPT1_MASK				(1 << 0)
 
 /* CM_IDLEST_MDM and PM_WKST_MDM shared bits */
-#define OMAP2430_ST_MDM_SHIFT				(1 << 0)
+#define OMAP2430_ST_MDM_SHIFT				0
+#define OMAP2430_ST_MDM_MASK				(1 << 0)
 
 
 /* 3430 register bits shared between CM & PRM registers */
diff --git a/arch/arm/mach-omap2/board-rx51-sdram.c b/arch/arm/mach-omap2/sdram-nokia.c
index a43b2c5..14caa22 100644
--- a/arch/arm/mach-omap2/board-rx51-sdram.c
+++ b/arch/arm/mach-omap2/sdram-nokia.c
@@ -1,7 +1,7 @@
 /*
- * SDRC register values for RX51
+ * SDRC register values for Nokia boards
  *
- * Copyright (C) 2008 Nokia Corporation
+ * Copyright (C) 2008, 2010 Nokia Corporation
  *
  * Lauri Leukkunen <lauri.leukkunen@nokia.com>
  *
@@ -22,6 +22,7 @@
 #include <plat/clock.h>
 #include <plat/sdrc.h>
 
+#include "sdram-nokia.h"
 
 /* In picoseconds, except for tREF (ns), tXP, tCKE, tWTR (clks) */
 struct sdram_timings {
@@ -43,9 +44,28 @@ struct sdram_timings {
 	u32 tWTR;
 };
 
-static struct omap_sdrc_params rx51_sdrc_params[4];
+static const struct sdram_timings nokia_97dot6mhz_timings[] = {
+	{
+		.casl = 3,
+		.tDAL = 30725,
+		.tDPL = 15362,
+		.tRRD = 10241,
+		.tRCD = 20483,
+		.tRP = 15362,
+		.tRAS = 40967,
+		.tRC = 56330,
+		.tRFC = 138266,
+		.tXSR = 204839,
+
+		.tREF = 7798,
+
+		.tXP = 2,
+		.tCKE = 4,
+		.tWTR = 2,
+	},
+};
 
-static const struct sdram_timings rx51_timings[] = {
+static const struct sdram_timings nokia_166mhz_timings[] = {
 	{
 		.casl = 3,
 		.tDAL = 33000,
@@ -66,6 +86,38 @@ static const struct sdram_timings rx51_timings[] = {
 	},
 };
 
+static const struct sdram_timings nokia_195dot2mhz_timings[] = {
+	{
+		.casl = 3,
+		.tDAL = 30725,
+		.tDPL = 15362,
+		.tRRD = 10241,
+		.tRCD = 20483,
+		.tRP = 15362,
+		.tRAS = 40967,
+		.tRC = 56330,
+		.tRFC = 138266,
+		.tXSR = 204839,
+
+		.tREF = 7752,
+
+		.tXP = 2,
+		.tCKE = 4,
+		.tWTR = 2,
+	},
+};
+
+static const struct {
+	long rate;
+	struct sdram_timings const *data;
+} nokia_timings[] = {
+	{ 83000000, nokia_166mhz_timings },
+	{ 97600000, nokia_97dot6mhz_timings },
+	{ 166000000, nokia_166mhz_timings },
+	{ 195200000, nokia_195dot2mhz_timings },
+};
+static struct omap_sdrc_params nokia_sdrc_params[ARRAY_SIZE(nokia_timings) + 1];
+
 static unsigned long sdrc_get_fclk_period(long rate)
 {
 	/* In picoseconds */
@@ -110,12 +162,12 @@ static int set_sdrc_timing_regval(u32 *regval, int st_bit, int end_bit,
 #ifdef DEBUG
 #define SDRC_SET_ONE(reg, st, end, field, rate) \
 	if (set_sdrc_timing_regval((reg), (st), (end), \
-			rx51_timings->field, (rate), #field) < 0) \
+			memory_timings->field, (rate), #field) < 0) \
 		err = -1;
 #else
 #define SDRC_SET_ONE(reg, st, end, field, rate) \
 	if (set_sdrc_timing_regval((reg), (st), (end), \
-			rx51_timings->field) < 0) \
+			memory_timings->field) < 0) \
 		err = -1;
 #endif
 
@@ -148,18 +200,19 @@ static int set_sdrc_timing_regval_ps(u32 *regval, int st_bit, int end_bit,
 #ifdef DEBUG
 #define SDRC_SET_ONE_PS(reg, st, end, field, rate) \
 	if (set_sdrc_timing_regval_ps((reg), (st), (end), \
-			rx51_timings->field, \
+			memory_timings->field, \
 			(rate), #field) < 0) \
 		err = -1;
 
 #else
 #define SDRC_SET_ONE_PS(reg, st, end, field, rate) \
 	if (set_sdrc_timing_regval_ps((reg), (st), (end), \
-			rx51_timings->field, (rate)) < 0) \
+			memory_timings->field, (rate)) < 0) \
 		err = -1;
 #endif
 
-static int sdrc_timings(int id, long rate)
+static int sdrc_timings(int id, long rate,
+			const struct sdram_timings *memory_timings)
 {
 	u32 ticks_per_ms;
 	u32 rfr, l;
@@ -184,7 +237,7 @@ static int sdrc_timings(int id, long rate)
 	SDRC_SET_ONE(&actim_ctrlb, 16, 17, tWTR, l3_rate);
 
 	ticks_per_ms = l3_rate;
-	rfr = rx51_timings[0].tREF * ticks_per_ms / 1000000;
+	rfr = memory_timings[0].tREF * ticks_per_ms / 1000000;
 	if (rfr > 65535 + 50)
 		rfr = 65535;
 	else
@@ -197,25 +250,30 @@ static int sdrc_timings(int id, long rate)
 	l = rfr << 8;
 	rfr_ctrl = l | 0x1; /* autorefresh, reload counter with 1xARCV */
 
-	rx51_sdrc_params[id].rate = rate;
-	rx51_sdrc_params[id].actim_ctrla = actim_ctrla;
-	rx51_sdrc_params[id].actim_ctrlb = actim_ctrlb;
-	rx51_sdrc_params[id].rfr_ctrl = rfr_ctrl;
-	rx51_sdrc_params[id].mr = 0x32;
+	nokia_sdrc_params[id].rate = rate;
+	nokia_sdrc_params[id].actim_ctrla = actim_ctrla;
+	nokia_sdrc_params[id].actim_ctrlb = actim_ctrlb;
+	nokia_sdrc_params[id].rfr_ctrl = rfr_ctrl;
+	nokia_sdrc_params[id].mr = 0x32;
 
-	rx51_sdrc_params[id + 1].rate = 0;
+	nokia_sdrc_params[id + 1].rate = 0;
 
 	return err;
 }
 
-struct omap_sdrc_params *rx51_get_sdram_timings(void)
+struct omap_sdrc_params *nokia_get_sdram_timings(void)
 {
-	int err;
+	int err = 0;
+	int i;
 
-	err = sdrc_timings(0, 41500000);
-	err |= sdrc_timings(1, 83000000);
-	err |= sdrc_timings(2, 166000000);
+	for (i = 0; i < ARRAY_SIZE(nokia_timings); i++) {
+		err |= sdrc_timings(i, nokia_timings[i].rate,
+				       nokia_timings[i].data);
+		if (err)
+			pr_err("%s: error with rate %ld: %d\n", __func__,
+			       nokia_timings[i].rate, err);
+	}
 
-	return &rx51_sdrc_params[0];
+	return err ? NULL : nokia_sdrc_params;
 }
 
diff --git a/arch/arm/mach-omap2/sdram-nokia.h b/arch/arm/mach-omap2/sdram-nokia.h
new file mode 100644
index 0000000..ee63da5
--- /dev/null
+++ b/arch/arm/mach-omap2/sdram-nokia.h
@@ -0,0 +1,12 @@
+/*
+ * SDRC register values for Nokia boards
+ *
+ * Copyright (C) 2010 Nokia
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+struct omap_sdrc_params *nokia_get_sdram_timings(void);
+
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index d2060a1..e5c9932 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -241,7 +241,8 @@ static inline void palmtx_keys_init(void) {}
 /******************************************************************************
  * NAND Flash
  ******************************************************************************/
-#if defined(CONFIG_MTD_NAND_GPIO) || defined(CONFIG_MTD_NAND_GPIO_MODULE)
+#if defined(CONFIG_MTD_NAND_PLATFORM) || \
+	defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
 static void palmtx_nand_cmd_ctl(struct mtd_info *mtd, int cmd,
 				 unsigned int ctrl)
 {
diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index cef6a65..fa2e5bf 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -16,7 +16,7 @@ config CPU_S3C2412
 config CPU_S3C2412_ONLY
 	bool
 	depends on ARCH_S3C2410 && !CPU_S3C2400 && !CPU_S3C2410 && \
-		   !CPU_2416 && !CPU_S3C2440 && !CPU_S3C2442 && \
+		   !CPU_S3C2416 && !CPU_S3C2440 && !CPU_S3C2442 && \
 		   !CPU_S3C2443 && CPU_S3C2412
 	default y if CPU_S3C2412
 
diff --git a/arch/arm/mach-s3c2416/Kconfig b/arch/arm/mach-s3c2416/Kconfig
index 87b9c9f..27b3e7c 100644
--- a/arch/arm/mach-s3c2416/Kconfig
+++ b/arch/arm/mach-s3c2416/Kconfig
@@ -35,9 +35,12 @@ menu "S3C2416 Machines"
 config MACH_SMDK2416
 	bool "SMDK2416"
 	select CPU_S3C2416
+	select MACH_SMDK
 	select S3C_DEV_FB
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC1
+	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
 	select S3C2416_PM if PM
 	help
 	  Say Y here if you are using an SMDK2416
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index ff024a6..a0cb258 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -18,6 +18,7 @@ config CPU_S3C2440
 config CPU_S3C2442
 	bool
 	select CPU_ARM920T
+	select S3C_GPIO_PULL_DOWN
 	select S3C2410_CLOCK
 	select S3C2410_GPIO
 	select S3C2410_PM if PM
@@ -178,6 +179,9 @@ config MACH_MINI2440
 	bool "MINI2440 development board"
 	select CPU_S3C2440
 	select EEPROM_AT24
+	select NEW_LEDS
+	select LEDS_CLASS
+	select LEDS_TRIGGER
 	select LEDS_TRIGGER_BACKLIGHT
 	select S3C_DEV_NAND
 	select S3C_DEV_USB_HOST
diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c
index d50f3ae..f7663f7 100644
--- a/arch/arm/mach-s3c2440/s3c2440.c
+++ b/arch/arm/mach-s3c2440/s3c2440.c
@@ -46,9 +46,6 @@ int __init s3c2440_init(void)
 {
 	printk("S3C2440: Initialising architecture\n");
 
-	s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up;
-	s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up;
-
 	/* change irq for watchdog */
 
 	s3c_device_wdt.resource[1].start = IRQ_S3C2440_WDT;
@@ -58,3 +55,11 @@ int __init s3c2440_init(void)
 
 	return sysdev_register(&s3c2440_sysdev);
 }
+
+void __init s3c2440_map_io(void)
+{
+	s3c244x_map_io();
+
+	s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up;
+	s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up;
+}
diff --git a/arch/arm/mach-s3c2440/s3c2442.c b/arch/arm/mach-s3c2440/s3c2442.c
index 188ad1e..ecf8135 100644
--- a/arch/arm/mach-s3c2440/s3c2442.c
+++ b/arch/arm/mach-s3c2440/s3c2442.c
@@ -32,6 +32,7 @@
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/mutex.h>
+#include <linux/gpio.h>
 #include <linux/clk.h>
 #include <linux/io.h>
 
@@ -43,6 +44,11 @@
 
 #include <plat/clock.h>
 #include <plat/cpu.h>
+#include <plat/s3c244x.h>
+
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
 
 /* S3C2442 extended clock support */
 
@@ -163,3 +169,11 @@ int __init s3c2442_init(void)
 
 	return sysdev_register(&s3c2442_sysdev);
 }
+
+void __init s3c2442_map_io(void)
+{
+	s3c244x_map_io();
+
+	s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1down;
+	s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1down;
+}
diff --git a/arch/arm/mach-s3c2443/Kconfig b/arch/arm/mach-s3c2443/Kconfig
index 4fef723..31babec 100644
--- a/arch/arm/mach-s3c2443/Kconfig
+++ b/arch/arm/mach-s3c2443/Kconfig
@@ -5,6 +5,7 @@
 config CPU_S3C2443
 	bool
 	depends on ARCH_S3C2410
+	select CPU_ARM920T
 	select S3C2443_DMA if S3C2410_DMA
 	select CPU_LLSERIAL_S3C2440
 	select SAMSUNG_CLKSRC
diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S
index 99fa688..c96fa1b 100644
--- a/arch/arm/mm/cache-v6.S
+++ b/arch/arm/mm/cache-v6.S
@@ -203,6 +203,10 @@ ENTRY(v6_flush_kern_dcache_area)
  *	- end     - virtual end address of region
  */
 v6_dma_inv_range:
+#ifdef CONFIG_DMA_CACHE_RWFO
+	ldrb	r2, [r0]			@ read for ownership
+	strb	r2, [r0]			@ write for ownership
+#endif
 	tst	r0, #D_CACHE_LINE_SIZE - 1
 	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
 #ifdef HARVARD_CACHE
@@ -211,6 +215,10 @@ v6_dma_inv_range:
 	mcrne	p15, 0, r0, c7, c11, 1		@ clean unified line
 #endif
 	tst	r1, #D_CACHE_LINE_SIZE - 1
+#ifdef CONFIG_DMA_CACHE_RWFO
+	ldrneb	r2, [r1, #-1]			@ read for ownership
+	strneb	r2, [r1, #-1]			@ write for ownership
+#endif
 	bic	r1, r1, #D_CACHE_LINE_SIZE - 1
 #ifdef HARVARD_CACHE
 	mcrne	p15, 0, r1, c7, c14, 1		@ clean & invalidate D line
@@ -218,10 +226,6 @@ v6_dma_inv_range:
 	mcrne	p15, 0, r1, c7, c15, 1		@ clean & invalidate unified line
 #endif
 1:
-#ifdef CONFIG_DMA_CACHE_RWFO
-	ldr	r2, [r0]			@ read for ownership
-	str	r2, [r0]			@ write for ownership
-#endif
 #ifdef HARVARD_CACHE
 	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D line
 #else
@@ -229,6 +233,10 @@ v6_dma_inv_range:
 #endif
 	add	r0, r0, #D_CACHE_LINE_SIZE
 	cmp	r0, r1
+#ifdef CONFIG_DMA_CACHE_RWFO
+	ldrlo	r2, [r0]			@ read for ownership
+	strlo	r2, [r0]			@ write for ownership
+#endif
 	blo	1b
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
@@ -263,12 +271,12 @@ v6_dma_clean_range:
  *	- end     - virtual end address of region
  */
 ENTRY(v6_dma_flush_range)
-	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
-1:
 #ifdef CONFIG_DMA_CACHE_RWFO
-	ldr	r2, [r0]			@ read for ownership
-	str	r2, [r0]			@ write for ownership
+	ldrb	r2, [r0]		@ read for ownership
+	strb	r2, [r0]		@ write for ownership
 #endif
+	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
+1:
 #ifdef HARVARD_CACHE
 	mcr	p15, 0, r0, c7, c14, 1		@ clean & invalidate D line
 #else
@@ -276,6 +284,10 @@ ENTRY(v6_dma_flush_range)
 #endif
 	add	r0, r0, #D_CACHE_LINE_SIZE
 	cmp	r0, r1
+#ifdef CONFIG_DMA_CACHE_RWFO
+	ldrlob	r2, [r0]			@ read for ownership
+	strlob	r2, [r0]			@ write for ownership
+#endif
 	blo	1b
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index a3ebf7a..6136e68 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -173,15 +173,22 @@ ENTRY(v7_coherent_user_range)
  UNWIND(.fnstart		)
 	dcache_line_size r2, r3
 	sub	r3, r2, #1
-	bic	r0, r0, r3
+	bic	r12, r0, r3
 1:
- USER(	mcr	p15, 0, r0, c7, c11, 1	)	@ clean D line to the point of unification
+ USER(	mcr	p15, 0, r12, c7, c11, 1	)	@ clean D line to the point of unification
+	add	r12, r12, r2
+	cmp	r12, r1
+	blo	1b
 	dsb
- USER(	mcr	p15, 0, r0, c7, c5, 1	)	@ invalidate I line
-	add	r0, r0, r2
+	icache_line_size r2, r3
+	sub	r3, r2, #1
+	bic	r12, r0, r3
 2:
-	cmp	r0, r1
-	blo	1b
+ USER(	mcr	p15, 0, r12, c7, c5, 1	)	@ invalidate I line
+	add	r12, r12, r2
+	cmp	r12, r1
+	blo	2b
+3:
 	mov	r0, #0
 	ALT_SMP(mcr	p15, 0, r0, c7, c1, 6)	@ invalidate BTB Inner Shareable
 	ALT_UP(mcr	p15, 0, r0, c7, c5, 6)	@ invalidate BTB
@@ -194,10 +201,10 @@ ENTRY(v7_coherent_user_range)
  * isn't mapped, just try the next page.
  */
 9001:
-	mov	r0, r0, lsr #12
-	mov	r0, r0, lsl #12
-	add	r0, r0, #4096
-	b	2b
+	mov	r12, r12, lsr #12
+	mov	r12, r12, lsl #12
+	add	r12, r12, #4096
+	b	3b
  UNWIND(.fnend		)
 ENDPROC(v7_coherent_kern_range)
 ENDPROC(v7_coherent_user_range)
diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S
index 7d63bea..b795afd 100644
--- a/arch/arm/mm/proc-macros.S
+++ b/arch/arm/mm/proc-macros.S
@@ -61,17 +61,27 @@
 	.endm
 
 /*
- * cache_line_size - get the cache line size from the CSIDR register
- * (available on ARMv7+). It assumes that the CSSR register was configured
- * to access the L1 data cache CSIDR.
+ * dcache_line_size - get the minimum D-cache line size from the CTR register
+ * on ARMv7.
  */
 	.macro	dcache_line_size, reg, tmp
-	mrc	p15, 1, \tmp, c0, c0, 0		@ read CSIDR
-	and	\tmp, \tmp, #7			@ cache line size encoding
-	mov	\reg, #16			@ size offset
+	mrc	p15, 0, \tmp, c0, c0, 1		@ read ctr
+	lsr	\tmp, \tmp, #16
+	and	\tmp, \tmp, #0xf		@ cache line size encoding
+	mov	\reg, #4			@ bytes per word
 	mov	\reg, \reg, lsl \tmp		@ actual cache line size
 	.endm
 
+/*
+ * icache_line_size - get the minimum I-cache line size from the CTR register
+ * on ARMv7.
+ */
+	.macro	icache_line_size, reg, tmp
+	mrc	p15, 0, \tmp, c0, c0, 1		@ read ctr
+	and	\tmp, \tmp, #0xf		@ cache line size encoding
+	mov	\reg, #4			@ bytes per word
+	mov	\reg, \reg, lsl \tmp		@ actual cache line size
+	.endm
 
 /*
  * Sanity check the PTE configuration for the code below - which makes
diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c
index 155fe43..8722a13 100644
--- a/arch/arm/plat-omap/counter_32k.c
+++ b/arch/arm/plat-omap/counter_32k.c
@@ -16,6 +16,7 @@
 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/err.h>
 
 #include <plat/common.h>
 #include <plat/board.h>
@@ -164,7 +165,7 @@ static int __init omap_init_clocksource_32k(void)
 			return -ENODEV;
 
 		sync_32k_ick = clk_get(NULL, "omap_32ksync_ick");
-		if (sync_32k_ick)
+		if (!IS_ERR(sync_32k_ick))
 			clk_enable(sync_32k_ick);
 
 		clocksource_32k.mult = clocksource_hz2mult(32768,
diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
index 229fbf2..7bbc074 100644
--- a/arch/arm/plat-omap/include/plat/uncompress.h
+++ b/arch/arm/plat-omap/include/plat/uncompress.h
@@ -148,6 +148,7 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
 		DEBUG_LL_OMAP3(3, craneboard);
 		DEBUG_LL_OMAP3(3, igep0020);
 		DEBUG_LL_OMAP3(3, igep0030);
+		DEBUG_LL_OMAP3(3, nokia_rm680);
 		DEBUG_LL_OMAP3(3, nokia_rx51);
 		DEBUG_LL_OMAP3(3, omap3517evm);
 		DEBUG_LL_OMAP3(3, omap3_beagle);
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 93641df..819ea0c 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -166,7 +166,7 @@ static void __init omap_detect_sram(void)
 		     cpu_is_omap1710())
 			omap_sram_size = 0x4000;	/* 16K */
 		else if (cpu_is_omap1611())
-			omap_sram_size = 0x3e800;	/* 250K */
+			omap_sram_size = SZ_256K;
 		else {
 			printk(KERN_ERR "Could not detect SRAM size\n");
 			omap_sram_size = 0x4000;
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index 76d0858..4a10c0f 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -88,7 +88,7 @@ static struct cpu_table cpu_ids[] __initdata = {
 	{
 		.idcode		= 0x32440000,
 		.idmask		= 0xffffffff,
-		.map_io		= s3c244x_map_io,
+		.map_io		= s3c2440_map_io,
 		.init_clocks	= s3c244x_init_clocks,
 		.init_uarts	= s3c244x_init_uarts,
 		.init		= s3c2440_init,
@@ -97,7 +97,7 @@ static struct cpu_table cpu_ids[] __initdata = {
 	{
 		.idcode		= 0x32440001,
 		.idmask		= 0xffffffff,
-		.map_io		= s3c244x_map_io,
+		.map_io		= s3c2440_map_io,
 		.init_clocks	= s3c244x_init_clocks,
 		.init_uarts	= s3c244x_init_uarts,
 		.init		= s3c2440_init,
@@ -106,7 +106,7 @@ static struct cpu_table cpu_ids[] __initdata = {
 	{
 		.idcode		= 0x32440aaa,
 		.idmask		= 0xffffffff,
-		.map_io		= s3c244x_map_io,
+		.map_io		= s3c2442_map_io,
 		.init_clocks	= s3c244x_init_clocks,
 		.init_uarts	= s3c244x_init_uarts,
 		.init		= s3c2442_init,
@@ -115,7 +115,7 @@ static struct cpu_table cpu_ids[] __initdata = {
 	{
 		.idcode		= 0x32440aab,
 		.idmask		= 0xffffffff,
-		.map_io		= s3c244x_map_io,
+		.map_io		= s3c2442_map_io,
 		.init_clocks	= s3c244x_init_clocks,
 		.init_uarts	= s3c244x_init_uarts,
 		.init		= s3c2442_init,
diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c
index 24c6f5a..243b641 100644
--- a/arch/arm/plat-s3c24xx/gpiolib.c
+++ b/arch/arm/plat-s3c24xx/gpiolib.c
@@ -82,8 +82,6 @@ static struct s3c_gpio_cfg s3c24xx_gpiocfg_banka = {
 struct s3c_gpio_cfg s3c24xx_gpiocfg_default = {
 	.set_config	= s3c_gpio_setcfg_s3c24xx,
 	.get_config	= s3c_gpio_getcfg_s3c24xx,
-	.set_pull	= s3c_gpio_setpull_1up,
-	.get_pull	= s3c_gpio_getpull_1up,
 };
 
 struct s3c_gpio_chip s3c24xx_gpios[] = {
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c244x.h b/arch/arm/plat-s3c24xx/include/plat/s3c244x.h
index 307248d..89e8d0a 100644
--- a/arch/arm/plat-s3c24xx/include/plat/s3c244x.h
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c244x.h
@@ -21,17 +21,22 @@ extern void s3c244x_init_clocks(int xtal);
 #else
 #define s3c244x_init_clocks NULL
 #define s3c244x_init_uarts NULL
-#define s3c244x_map_io NULL
 #endif
 
 #ifdef CONFIG_CPU_S3C2440
 extern  int s3c2440_init(void);
+
+extern void s3c2440_map_io(void);
 #else
 #define s3c2440_init NULL
+#define s3c2440_map_io NULL
 #endif
 
 #ifdef CONFIG_CPU_S3C2442
 extern  int s3c2442_init(void);
+
+extern void s3c2442_map_io(void);
 #else
 #define s3c2442_init NULL
+#define s3c2442_map_io NULL
 #endif
diff --git a/arch/arm/plat-samsung/gpio-config.c b/arch/arm/plat-samsung/gpio-config.c
index b732b77..0aa32f2 100644
--- a/arch/arm/plat-samsung/gpio-config.c
+++ b/arch/arm/plat-samsung/gpio-config.c
@@ -280,18 +280,17 @@ s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip,
 }
 #endif
 
-#ifdef CONFIG_S3C_GPIO_PULL_UP
-int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip,
-			 unsigned int off, s3c_gpio_pull_t pull)
+#if defined(CONFIG_S3C_GPIO_PULL_UP) || defined(CONFIG_S3C_GPIO_PULL_DOWN)
+static int s3c_gpio_setpull_1(struct s3c_gpio_chip *chip,
+			 unsigned int off, s3c_gpio_pull_t pull,
+			 s3c_gpio_pull_t updown)
 {
 	void __iomem *reg = chip->base + 0x08;
 	u32 pup = __raw_readl(reg);
 
-	pup = __raw_readl(reg);
-
-	if (pup == S3C_GPIO_PULL_UP)
+	if (pull == updown)
 		pup &= ~(1 << off);
-	else if (pup == S3C_GPIO_PULL_NONE)
+	else if (pull == S3C_GPIO_PULL_NONE)
 		pup |= (1 << off);
 	else
 		return -EINVAL;
@@ -300,17 +299,45 @@ int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip,
 	return 0;
 }
 
-s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip,
-				     unsigned int off)
+static s3c_gpio_pull_t s3c_gpio_getpull_1(struct s3c_gpio_chip *chip,
+				     unsigned int off, s3c_gpio_pull_t updown)
 {
 	void __iomem *reg = chip->base + 0x08;
 	u32 pup = __raw_readl(reg);
 
 	pup &= (1 << off);
-	return pup ? S3C_GPIO_PULL_NONE : S3C_GPIO_PULL_UP;
+	return pup ? S3C_GPIO_PULL_NONE : updown;
+}
+#endif /* CONFIG_S3C_GPIO_PULL_UP || CONFIG_S3C_GPIO_PULL_DOWN */
+
+#ifdef CONFIG_S3C_GPIO_PULL_UP
+s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip,
+				     unsigned int off)
+{
+	return s3c_gpio_getpull_1(chip, off, S3C_GPIO_PULL_UP);
+}
+
+int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip,
+			 unsigned int off, s3c_gpio_pull_t pull)
+{
+	return s3c_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_UP);
 }
 #endif /* CONFIG_S3C_GPIO_PULL_UP */
 
+#ifdef CONFIG_S3C_GPIO_PULL_DOWN
+s3c_gpio_pull_t s3c_gpio_getpull_1down(struct s3c_gpio_chip *chip,
+				     unsigned int off)
+{
+	return s3c_gpio_getpull_1(chip, off, S3C_GPIO_PULL_DOWN);
+}
+
+int s3c_gpio_setpull_1down(struct s3c_gpio_chip *chip,
+			 unsigned int off, s3c_gpio_pull_t pull)
+{
+	return s3c_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_DOWN);
+}
+#endif /* CONFIG_S3C_GPIO_PULL_DOWN */
+
 #ifdef CONFIG_S5P_GPIO_DRVSTR
 s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin)
 {
diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
index 8fd65d8..0d2c570 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
@@ -210,6 +210,17 @@ extern s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip,
 					    unsigned int off);
 
 /**
+ * s3c_gpio_getpull_1down() - Get configuration for choice of down or none
+ * @chip: The gpio chip that the GPIO pin belongs to
+ * @off: The offset to the pin to get the configuration of.
+ *
+ * This helper function reads the state of the pull-down resistor for the
+ * given GPIO in the same case as s3c_gpio_setpull_1down.
+*/
+extern s3c_gpio_pull_t s3c_gpio_getpull_1down(struct s3c_gpio_chip *chip,
+					    unsigned int off);
+
+/**
  * s3c_gpio_setpull_s3c2443() - Pull configuration for s3c2443.
  * @chip: The gpio chip that is being configured.
  * @off: The offset for the GPIO being configured.
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 55590a4..2fea897 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Thu Sep 9 22:43:01 2010
+# Last update: Sun Dec 12 23:24:27 2010
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -2321,7 +2321,7 @@ mx31txtr		MACH_MX31TXTR		MX31TXTR		2332
 u380			MACH_U380		U380			2333
 oamp3_hualu		MACH_HUALU_BOARD	HUALU_BOARD		2334
 npcmx50			MACH_NPCMX50		NPCMX50			2335
-mx51_lange51		MACH_MX51_LANGE51	MX51_LANGE51		2336
+mx51_efikamx		MACH_MX51_EFIKAMX	MX51_EFIKAMX		2336
 mx51_lange52		MACH_MX51_LANGE52	MX51_LANGE52		2337
 riom			MACH_RIOM		RIOM			2338
 comcas			MACH_COMCAS		COMCAS			2339
@@ -2355,7 +2355,7 @@ at91sam9263cs		MACH_AT91SAM9263CS	AT91SAM9263CS		2366
 csb732			MACH_CSB732		CSB732			2367
 u8500			MACH_U8500		U8500			2368
 huqiu			MACH_HUQIU		HUQIU			2369
-mx51_kunlun		MACH_MX51_KUNLUN	MX51_KUNLUN		2370
+mx51_efikasb		MACH_MX51_EFIKASB	MX51_EFIKASB		2370
 pmt1g			MACH_PMT1G		PMT1G			2371
 htcelf			MACH_HTCELF		HTCELF			2372
 armadillo420		MACH_ARMADILLO420	ARMADILLO420		2373
@@ -2971,7 +2971,7 @@ premierwave_en		MACH_PREMIERWAVE_EN	PREMIERWAVE_EN		2985
 wasabi			MACH_WASABI		WASABI			2986
 vivow			MACH_VIVOW		VIVOW			2987
 mx50_rdp		MACH_MX50_RDP		MX50_RDP		2988
-universal		MACH_UNIVERSAL		UNIVERSAL		2989
+universal_c210		MACH_UNIVERSAL_C210	UNIVERSAL_C210		2989
 real6410		MACH_REAL6410		REAL6410		2990
 spx_sakura		MACH_SPX_SAKURA		SPX_SAKURA		2991
 ij3k_2440		MACH_IJ3K_2440		IJ3K_2440		2992
@@ -3044,3 +3044,178 @@ harvest_desoto		MACH_HARVEST_DESOTO	HARVEST_DESOTO		3059
 msm8x60_qrdc		MACH_MSM8X60_QRDC	MSM8X60_QRDC		3060
 spear900		MACH_SPEAR900		SPEAR900		3061
 pcontrol_g20		MACH_PCONTROL_G20	PCONTROL_G20		3062
+rdstor			MACH_RDSTOR		RDSTOR			3063
+usdloader		MACH_USDLOADER		USDLOADER		3064
+tsoploader		MACH_TSOPLOADER		TSOPLOADER		3065
+kronos			MACH_KRONOS		KRONOS			3066
+ffcore			MACH_FFCORE		FFCORE			3067
+mone			MACH_MONE		MONE			3068
+unit2s			MACH_UNIT2S		UNIT2S			3069
+acer_a5			MACH_ACER_A5		ACER_A5			3070
+etherpro_isp		MACH_ETHERPRO_ISP	ETHERPRO_ISP		3071
+stretchs7000		MACH_STRETCHS7000	STRETCHS7000		3072
+p87_smartsim		MACH_P87_SMARTSIM	P87_SMARTSIM		3073
+tulip			MACH_TULIP		TULIP			3074
+sunflower		MACH_SUNFLOWER		SUNFLOWER		3075
+rib			MACH_RIB		RIB			3076
+clod			MACH_CLOD		CLOD			3077
+rump			MACH_RUMP		RUMP			3078
+tenderloin		MACH_TENDERLOIN		TENDERLOIN		3079
+shortloin		MACH_SHORTLOIN		SHORTLOIN		3080
+crespo			MACH_CRESPO		CRESPO			3081
+antares			MACH_ANTARES		ANTARES			3082
+wb40n			MACH_WB40N		WB40N			3083
+herring			MACH_HERRING		HERRING			3084
+naxy400			MACH_NAXY400		NAXY400			3085
+naxy1200		MACH_NAXY1200		NAXY1200		3086
+vpr200			MACH_VPR200		VPR200			3087
+bug20			MACH_BUG20		BUG20			3088
+goflexnet		MACH_GOFLEXNET		GOFLEXNET		3089
+torbreck		MACH_TORBRECK		TORBRECK		3090
+saarb_mg1		MACH_SAARB_MG1		SAARB_MG1		3091
+callisto		MACH_CALLISTO		CALLISTO		3092
+multhsu			MACH_MULTHSU		MULTHSU			3093
+saluda			MACH_SALUDA		SALUDA			3094
+pemp_omap3_apollo	MACH_PEMP_OMAP3_APOLLO	PEMP_OMAP3_APOLLO	3095
+vc0718			MACH_VC0718		VC0718			3096
+mvblx			MACH_MVBLX		MVBLX			3097
+inhand_apeiron		MACH_INHAND_APEIRON	INHAND_APEIRON		3098
+inhand_fury		MACH_INHAND_FURY	INHAND_FURY		3099
+inhand_siren		MACH_INHAND_SIREN	INHAND_SIREN		3100
+hdnvp			MACH_HDNVP		HDNVP			3101
+softwinner		MACH_SOFTWINNER		SOFTWINNER		3102
+prima2_evb		MACH_PRIMA2_EVB		PRIMA2_EVB		3103
+nas6210			MACH_NAS6210		NAS6210			3104
+unisdev			MACH_UNISDEV		UNISDEV			3105
+sbca11			MACH_SBCA11		SBCA11			3106
+saga			MACH_SAGA		SAGA			3107
+ns_k330			MACH_NS_K330		NS_K330			3108
+tanna			MACH_TANNA		TANNA			3109
+imate8502		MACH_IMATE8502		IMATE8502		3110
+aspen			MACH_ASPEN		ASPEN			3111
+daintree_cwac		MACH_DAINTREE_CWAC	DAINTREE_CWAC		3112
+zmx25			MACH_ZMX25		ZMX25			3113
+maple1			MACH_MAPLE1		MAPLE1			3114
+qsd8x72_surf		MACH_QSD8X72_SURF	QSD8X72_SURF		3115
+qsd8x72_ffa		MACH_QSD8X72_FFA	QSD8X72_FFA		3116
+abilene			MACH_ABILENE		ABILENE			3117
+eigen_ttr		MACH_EIGEN_TTR		EIGEN_TTR		3118
+iomega_ix2_200		MACH_IOMEGA_IX2_200	IOMEGA_IX2_200		3119
+coretec_vcx7400		MACH_CORETEC_VCX7400	CORETEC_VCX7400		3120
+santiago		MACH_SANTIAGO		SANTIAGO		3121
+mx257sol		MACH_MX257SOL		MX257SOL		3122
+strasbourg		MACH_STRASBOURG		STRASBOURG		3123
+msm8x60_fluid		MACH_MSM8X60_FLUID	MSM8X60_FLUID		3124
+smartqv5		MACH_SMARTQV5		SMARTQV5		3125
+smartqv3		MACH_SMARTQV3		SMARTQV3		3126
+smartqv7		MACH_SMARTQV7		SMARTQV7		3127
+paz00			MACH_PAZ00		PAZ00			3128
+acmenetusfoxg20		MACH_ACMENETUSFOXG20	ACMENETUSFOXG20		3129
+htcwillow		MACH_HTCWILLOW		HTCWILLOW		3130
+fwbd_0404		MACH_FWBD_0404		FWBD_0404		3131
+hdgu			MACH_HDGU		HDGU			3132
+pyramid			MACH_PYRAMID		PYRAMID			3133
+epiphan			MACH_EPIPHAN		EPIPHAN			3134
+omap_bender		MACH_OMAP_BENDER	OMAP_BENDER		3135
+gurnard			MACH_GURNARD		GURNARD			3136
+gtl_it5100		MACH_GTL_IT5100		GTL_IT5100		3137
+bcm2708			MACH_BCM2708		BCM2708			3138
+mx51_ggc		MACH_MX51_GGC		MX51_GGC		3139
+sharespace		MACH_SHARESPACE		SHARESPACE		3140
+haba_knx_explorer	MACH_HABA_KNX_EXPLORER	HABA_KNX_EXPLORER	3141
+simtec_kirkmod		MACH_SIMTEC_KIRKMOD	SIMTEC_KIRKMOD		3142
+crux			MACH_CRUX		CRUX			3143
+mx51_bravo		MACH_MX51_BRAVO		MX51_BRAVO		3144
+charon			MACH_CHARON		CHARON			3145
+picocom3		MACH_PICOCOM3		PICOCOM3		3146
+picocom4		MACH_PICOCOM4		PICOCOM4		3147
+serrano			MACH_SERRANO		SERRANO			3148
+doubleshot		MACH_DOUBLESHOT		DOUBLESHOT		3149
+evsy			MACH_EVSY		EVSY			3150
+huashan			MACH_HUASHAN		HUASHAN			3151
+lausanne		MACH_LAUSANNE		LAUSANNE		3152
+emerald			MACH_EMERALD		EMERALD			3153
+tqma35			MACH_TQMA35		TQMA35			3154
+marvel			MACH_MARVEL		MARVEL			3155
+manuae			MACH_MANUAE		MANUAE			3156
+chacha			MACH_CHACHA		CHACHA			3157
+lemon			MACH_LEMON		LEMON			3158
+csc			MACH_CSC		CSC			3159
+gira_knxip_router	MACH_GIRA_KNXIP_ROUTER	GIRA_KNXIP_ROUTER	3160
+t20			MACH_T20		T20			3161
+hdmini			MACH_HDMINI		HDMINI			3162
+sciphone_g2		MACH_SCIPHONE_G2	SCIPHONE_G2		3163
+express			MACH_EXPRESS		EXPRESS			3164
+express_kt		MACH_EXPRESS_KT		EXPRESS_KT		3165
+maximasp		MACH_MAXIMASP		MAXIMASP		3166
+nitrogen_imx51		MACH_NITROGEN_IMX51	NITROGEN_IMX51		3167
+nitrogen_imx53		MACH_NITROGEN_IMX53	NITROGEN_IMX53		3168
+sunfire			MACH_SUNFIRE		SUNFIRE			3169
+arowana			MACH_AROWANA		AROWANA			3170
+tegra_daytona		MACH_TEGRA_DAYTONA	TEGRA_DAYTONA		3171
+tegra_swordfish		MACH_TEGRA_SWORDFISH	TEGRA_SWORDFISH		3172
+edison			MACH_EDISON		EDISON			3173
+svp8500v1		MACH_SVP8500V1		SVP8500V1		3174
+svp8500v2		MACH_SVP8500V2		SVP8500V2		3175
+svp5500			MACH_SVP5500		SVP5500			3176
+b5500			MACH_B5500		B5500			3177
+s5500			MACH_S5500		S5500			3178
+icon			MACH_ICON		ICON			3179
+elephant		MACH_ELEPHANT		ELEPHANT		3180
+msm8x60_fusion		MACH_MSM8X60_FUSION	MSM8X60_FUSION		3181
+shooter			MACH_SHOOTER		SHOOTER			3182
+spade_lte		MACH_SPADE_LTE		SPADE_LTE		3183
+philhwani		MACH_PHILHWANI		PHILHWANI		3184
+gsncomm			MACH_GSNCOMM		GSNCOMM			3185
+strasbourg_a2		MACH_STRASBOURG_A2	STRASBOURG_A2		3186
+mmm			MACH_MMM		MMM			3187
+davinci_dm365_bv	MACH_DAVINCI_DM365_BV	DAVINCI_DM365_BV	3188
+ag5evm			MACH_AG5EVM		AG5EVM			3189
+sc575plc		MACH_SC575PLC		SC575PLC		3190
+sc575hmi		MACH_SC575IPC		SC575IPC		3191
+omap3_tdm3730		MACH_OMAP3_TDM3730	OMAP3_TDM3730		3192
+g7			MACH_G7			G7			3193
+top9000_eval		MACH_TOP9000_EVAL	TOP9000_EVAL		3194
+top9000_su		MACH_TOP9000_SU		TOP9000_SU		3195
+utm300			MACH_UTM300		UTM300			3196
+tsunagi			MACH_TSUNAGI		TSUNAGI			3197
+ts75xx			MACH_TS75XX		TS75XX			3198
+msm8x60_fusn_ffa	MACH_MSM8X60_FUSN_FFA	MSM8X60_FUSN_FFA	3199
+ts47xx			MACH_TS47XX		TS47XX			3200
+da850_k5		MACH_DA850_K5		DA850_K5		3201
+ax502			MACH_AX502		AX502			3202
+igep0032		MACH_IGEP0032		IGEP0032		3203
+antero			MACH_ANTERO		ANTERO			3204
+synergy			MACH_SYNERGY		SYNERGY			3205
+ics_if_voip		MACH_ICS_IF_VOIP	ICS_IF_VOIP		3206
+wlf_cragg_6410		MACH_WLF_CRAGG_6410	WLF_CRAGG_6410		3207
+punica			MACH_PUNICA		PUNICA			3208
+sbc_nt250		MACH_SBC_NT250		SBC_NT250		3209
+mx27_wmultra		MACH_MX27_WMULTRA	MX27_WMULTRA		3210
+mackerel		MACH_MACKEREL		MACKEREL		3211
+fa9x27			MACH_FA9X27		FA9X27			3213
+ns2816tb		MACH_NS2816TB		NS2816TB		3214
+ns2816_ntpad		MACH_NS2816_NTPAD	NS2816_NTPAD		3215
+ns2816_ntnb		MACH_NS2816_NTNB	NS2816_NTNB		3216
+kaen			MACH_KAEN		KAEN			3217
+nv1000			MACH_NV1000		NV1000			3218
+nuc950ts		MACH_NUC950TS		NUC950TS		3219
+nokia_rm680		MACH_NOKIA_RM680	NOKIA_RM680		3220
+ast2200			MACH_AST2200		AST2200			3221
+lead			MACH_LEAD		LEAD			3222
+unino1			MACH_UNINO1		UNINO1			3223
+greeco			MACH_GREECO		GREECO			3224
+verdi			MACH_VERDI		VERDI			3225
+dm6446_adbox		MACH_DM6446_ADBOX	DM6446_ADBOX		3226
+quad_salsa		MACH_QUAD_SALSA		QUAD_SALSA		3227
+abb_gma_1_1		MACH_ABB_GMA_1_1	ABB_GMA_1_1		3228
+svcid			MACH_SVCID		SVCID			3229
+msm8960_sim		MACH_MSM8960_SIM	MSM8960_SIM		3230
+msm8960_rumi3		MACH_MSM8960_RUMI3	MSM8960_RUMI3		3231
+icon_g			MACH_ICON_G		ICON_G			3232
+mb3			MACH_MB3		MB3			3233
+gsia18s			MACH_GSIA18S		GSIA18S			3234
+pivicc			MACH_PIVICC		PIVICC			3235
+pcm048			MACH_PCM048		PCM048			3236
+dds			MACH_DDS		DDS			3237
+chalten_xa1		MACH_CHALTEN_XA1	CHALTEN_XA1		3238
diff --git a/arch/mn10300/kernel/gdb-io-serial.c b/arch/mn10300/kernel/gdb-io-serial.c
index 0d5d63c..f28dc99 100644
--- a/arch/mn10300/kernel/gdb-io-serial.c
+++ b/arch/mn10300/kernel/gdb-io-serial.c
@@ -73,7 +73,8 @@ void gdbstub_io_init(void)
 	GDBPORT_SERIAL_IER = UART_IER_RDI | UART_IER_RLSI;
 
 	/* permit level 0 IRQs to take place */
-	local_change_intr_mask_level(NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1));
+	arch_local_change_intr_mask_level(
+		NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1));
 }
 
 /*
diff --git a/arch/mn10300/kernel/gdb-io-ttysm.c b/arch/mn10300/kernel/gdb-io-ttysm.c
index 97dfda2..abdeea1 100644
--- a/arch/mn10300/kernel/gdb-io-ttysm.c
+++ b/arch/mn10300/kernel/gdb-io-ttysm.c
@@ -87,7 +87,8 @@ void __init gdbstub_io_init(void)
 	tmp = *gdbstub_port->_control;
 
 	/* permit level 0 IRQs only */
-	local_change_intr_mask_level(NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1));
+	arch_local_change_intr_mask_level(
+		NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1));
 }
 
 /*
diff --git a/arch/mn10300/kernel/gdb-stub.c b/arch/mn10300/kernel/gdb-stub.c
index a5fc3f0..b169d99 100644
--- a/arch/mn10300/kernel/gdb-stub.c
+++ b/arch/mn10300/kernel/gdb-stub.c
@@ -1194,7 +1194,8 @@ static int gdbstub(struct pt_regs *regs, enum exception_code excep)
 
 	asm volatile("mov mdr,%0" : "=d"(mdr));
 	local_save_flags(epsw);
-	local_change_intr_mask_level(NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1));
+	arch_local_change_intr_mask_level(
+		NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1));
 
 	gdbstub_store_fpu();
 
diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c
index 56c8687..7eff9b7 100644
--- a/arch/s390/kernel/vtime.c
+++ b/arch/s390/kernel/vtime.c
@@ -19,6 +19,7 @@
 #include <linux/kernel_stat.h>
 #include <linux/rcupdate.h>
 #include <linux/posix-timers.h>
+#include <linux/cpu.h>
 
 #include <asm/s390_ext.h>
 #include <asm/timer.h>
@@ -566,6 +567,23 @@ void init_cpu_vtimer(void)
 	__ctl_set_bit(0,10);
 }
 
+static int __cpuinit s390_nohz_notify(struct notifier_block *self,
+				      unsigned long action, void *hcpu)
+{
+	struct s390_idle_data *idle;
+	long cpu = (long) hcpu;
+
+	idle = &per_cpu(s390_idle, cpu);
+	switch (action) {
+	case CPU_DYING:
+	case CPU_DYING_FROZEN:
+		idle->nohz_delay = 0;
+	default:
+		break;
+	}
+	return NOTIFY_OK;
+}
+
 void __init vtime_init(void)
 {
 	/* request the cpu timer external interrupt */
@@ -574,5 +592,6 @@ void __init vtime_init(void)
 
 	/* Enable cpu timer interrupts on the boot cpu. */
 	init_cpu_vtimer();
+	cpu_notifier(s390_nohz_notify, 0);
 }
 
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 7f217b3..2e9d78d 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -22,7 +22,8 @@ config SUPERH
 	select HAVE_SPARSE_IRQ
 	select RTC_LIB
 	select GENERIC_ATOMIC64
-	select GENERIC_HARDIRQS_NO_DEPRECATED
+	# Support the deprecated APIs until MFD and GPIOLIB catch up.
+	select GENERIC_HARDIRQS_NO_DEPRECATED if !MFD_SUPPORT && !GPIOLIB
 	help
 	  The SuperH is a RISC processor targeted for use in embedded systems
 	  and consumer electronics; it was also used in the Sega Dreamcast
diff --git a/arch/sh/include/asm/unistd_32.h b/arch/sh/include/asm/unistd_32.h
index 903cd618e..d6741fc 100644
--- a/arch/sh/include/asm/unistd_32.h
+++ b/arch/sh/include/asm/unistd_32.h
@@ -368,8 +368,9 @@
 #define __NR_sendmsg		355
 #define __NR_recvmsg		356
 #define __NR_recvmmsg		357
+#define __NR_accept4		358
 
-#define NR_syscalls 358
+#define NR_syscalls 359
 
 #ifdef __KERNEL__
 
diff --git a/arch/sh/kernel/syscalls_32.S b/arch/sh/kernel/syscalls_32.S
index e872e81..6fc347e 100644
--- a/arch/sh/kernel/syscalls_32.S
+++ b/arch/sh/kernel/syscalls_32.S
@@ -375,3 +375,4 @@ ENTRY(sys_call_table)
 	.long sys_sendmsg		/* 355 */
 	.long sys_recvmsg
 	.long sys_recvmmsg
+	.long sys_accept4
diff --git a/arch/sparc/include/asm/openprom.h b/arch/sparc/include/asm/openprom.h
index 81cd434..47eaafa 100644
--- a/arch/sparc/include/asm/openprom.h
+++ b/arch/sparc/include/asm/openprom.h
@@ -39,7 +39,7 @@ struct linux_dev_v2_funcs {
 	int (*v2_dev_open)(char *devpath);
 	void (*v2_dev_close)(int d);
 	int (*v2_dev_read)(int d, char *buf, int nbytes);
-	int (*v2_dev_write)(int d, char *buf, int nbytes);
+	int (*v2_dev_write)(int d, const char *buf, int nbytes);
 	int (*v2_dev_seek)(int d, int hi, int lo);
 
 	/* Never issued (multistage load support) */
diff --git a/arch/sparc/include/asm/oplib_32.h b/arch/sparc/include/asm/oplib_32.h
index 51296a6..9e5c640 100644
--- a/arch/sparc/include/asm/oplib_32.h
+++ b/arch/sparc/include/asm/oplib_32.h
@@ -60,25 +60,6 @@ extern char *prom_getbootargs(void);
 extern char *prom_mapio(char *virt_hint, int io_space, unsigned int phys_addr, unsigned int num_bytes);
 extern void prom_unmapio(char *virt_addr, unsigned int num_bytes);
 
-/* Device operations. */
-
-/* Open the device described by the passed string.  Note, that the format
- * of the string is different on V0 vs. V2->higher proms.  The caller must
- * know what he/she is doing!  Returns the device descriptor, an int.
- */
-extern int prom_devopen(char *device_string);
-
-/* Close a previously opened device described by the passed integer
- * descriptor.
- */
-extern int prom_devclose(int device_handle);
-
-/* Do a seek operation on the device described by the passed integer
- * descriptor.
- */
-extern void prom_seek(int device_handle, unsigned int seek_hival,
-		      unsigned int seek_lowval);
-
 /* Miscellaneous routines, don't really fit in any category per se. */
 
 /* Reboot the machine with the command line passed. */
@@ -121,19 +102,8 @@ extern int prom_getrev(void);
 /* Get the prom firmware revision. */
 extern int prom_getprev(void);
 
-/* Character operations to/from the console.... */
-
-/* Non-blocking get character from console. */
-extern int prom_nbgetchar(void);
-
-/* Non-blocking put character to console. */
-extern int prom_nbputchar(char character);
-
-/* Blocking get character from console. */
-extern char prom_getchar(void);
-
-/* Blocking put character to console. */
-extern void prom_putchar(char character);
+/* Write a buffer of characters to the console. */
+extern void prom_console_write_buf(const char *buf, int len);
 
 /* Prom's internal routines, don't use in kernel/boot code. */
 extern void prom_printf(const char *fmt, ...);
@@ -238,7 +208,6 @@ extern int prom_node_has_property(phandle node, char *property);
 extern int prom_setprop(phandle node, const char *prop_name, char *prop_value,
 			int value_size);
 
-extern phandle prom_pathtoinode(char *path);
 extern phandle prom_inst2pkg(int);
 
 /* Dorking with Bus ranges... */
diff --git a/arch/sparc/include/asm/oplib_64.h b/arch/sparc/include/asm/oplib_64.h
index c9cc078..8cd0df3 100644
--- a/arch/sparc/include/asm/oplib_64.h
+++ b/arch/sparc/include/asm/oplib_64.h
@@ -67,27 +67,6 @@ extern void prom_init(void *cif_handler, void *cif_stack);
 /* Boot argument acquisition, returns the boot command line string. */
 extern char *prom_getbootargs(void);
 
-/* Device utilities. */
-
-/* Device operations. */
-
-/* Open the device described by the passed string.  Note, that the format
- * of the string is different on V0 vs. V2->higher proms.  The caller must
- * know what he/she is doing!  Returns the device descriptor, an int.
- */
-extern int prom_devopen(const char *device_string);
-
-/* Close a previously opened device described by the passed integer
- * descriptor.
- */
-extern int prom_devclose(int device_handle);
-
-/* Do a seek operation on the device described by the passed integer
- * descriptor.
- */
-extern void prom_seek(int device_handle, unsigned int seek_hival,
-		      unsigned int seek_lowval);
-
 /* Miscellaneous routines, don't really fit in any category per se. */
 
 /* Reboot the machine with the command line passed. */
@@ -109,33 +88,14 @@ extern void prom_halt(void) __attribute__ ((noreturn));
 /* Halt and power-off the machine. */
 extern void prom_halt_power_off(void) __attribute__ ((noreturn));
 
-/* Set the PROM 'sync' callback function to the passed function pointer.
- * When the user gives the 'sync' command at the prom prompt while the
- * kernel is still active, the prom will call this routine.
- *
- */
-typedef int (*callback_func_t)(long *cmd);
-extern void prom_setcallback(callback_func_t func_ptr);
-
 /* Acquire the IDPROM of the root node in the prom device tree.  This
  * gets passed a buffer where you would like it stuffed.  The return value
  * is the format type of this idprom or 0xff on error.
  */
 extern unsigned char prom_get_idprom(char *idp_buffer, int idpbuf_size);
 
-/* Character operations to/from the console.... */
-
-/* Non-blocking get character from console. */
-extern int prom_nbgetchar(void);
-
-/* Non-blocking put character to console. */
-extern int prom_nbputchar(char character);
-
-/* Blocking get character from console. */
-extern char prom_getchar(void);
-
-/* Blocking put character to console. */
-extern void prom_putchar(char character);
+/* Write a buffer of characters to the console. */
+extern void prom_console_write_buf(const char *buf, int len);
 
 /* Prom's internal routines, don't use in kernel/boot code. */
 extern void prom_printf(const char *fmt, ...);
@@ -279,9 +239,7 @@ extern phandle prom_finddevice(const char *name);
 extern int prom_setprop(phandle node, const char *prop_name, char *prop_value,
 			int value_size);
 
-extern phandle prom_pathtoinode(const char *path);
 extern phandle prom_inst2pkg(int);
-extern int prom_service_exists(const char *service_name);
 extern void prom_sun4v_guest_soft_state(void);
 
 extern int prom_ihandle2path(int handle, char *buffer, int bufsize);
diff --git a/arch/sparc/kernel/leon_kernel.c b/arch/sparc/kernel/leon_kernel.c
index 2d51527..f01c426 100644
--- a/arch/sparc/kernel/leon_kernel.c
+++ b/arch/sparc/kernel/leon_kernel.c
@@ -114,7 +114,7 @@ void __init leon_init_timers(irq_handler_t counter_fn)
 	if (leon3_gptimer_regs && leon3_irqctrl_regs) {
 		LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[0].val, 0);
 		LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[0].rld,
-				      (((1000000 / 100) - 1)));
+				      (((1000000 / HZ) - 1)));
 		LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[0].ctrl, 0);
 
 #ifdef CONFIG_SMP
@@ -128,7 +128,7 @@ void __init leon_init_timers(irq_handler_t counter_fn)
 		}
 
 		LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[1].val, 0);
-		LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[1].rld, (((1000000/100) - 1)));
+		LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[1].rld, (((1000000/HZ) - 1)));
 		LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[1].ctrl, 0);
 # endif
 
diff --git a/arch/sparc/prom/Makefile b/arch/sparc/prom/Makefile
index 1b8c073..816c0fa 100644
--- a/arch/sparc/prom/Makefile
+++ b/arch/sparc/prom/Makefile
@@ -6,7 +6,6 @@ ccflags := -Werror
 
 lib-y                 := bootstr_$(BITS).o
 lib-$(CONFIG_SPARC32) += devmap.o
-lib-y                 += devops_$(BITS).o
 lib-y                 += init_$(BITS).o
 lib-$(CONFIG_SPARC32) += memory.o
 lib-y                 += misc_$(BITS).o
diff --git a/arch/sparc/prom/console_32.c b/arch/sparc/prom/console_32.c
index 5340264..4886310 100644
--- a/arch/sparc/prom/console_32.c
+++ b/arch/sparc/prom/console_32.c
@@ -16,63 +16,26 @@
 
 extern void restore_current(void);
 
-/* Non blocking get character from console input device, returns -1
- * if no input was taken.  This can be used for polling.
- */
-int
-prom_nbgetchar(void)
-{
-	static char inc;
-	int i = -1;
-	unsigned long flags;
-
-	spin_lock_irqsave(&prom_lock, flags);
-	switch(prom_vers) {
-	case PROM_V0:
-		i = (*(romvec->pv_nbgetchar))();
-		break;
-	case PROM_V2:
-	case PROM_V3:
-		if( (*(romvec->pv_v2devops).v2_dev_read)(*romvec->pv_v2bootargs.fd_stdin , &inc, 0x1) == 1) {
-			i = inc;
-		} else {
-			i = -1;
-		}
-		break;
-	default:
-		i = -1;
-		break;
-	};
-	restore_current();
-	spin_unlock_irqrestore(&prom_lock, flags);
-	return i; /* Ugh, we could spin forever on unsupported proms ;( */
-}
-
 /* Non blocking put character to console device, returns -1 if
  * unsuccessful.
  */
-int
-prom_nbputchar(char c)
+static int prom_nbputchar(const char *buf)
 {
-	static char outc;
 	unsigned long flags;
 	int i = -1;
 
 	spin_lock_irqsave(&prom_lock, flags);
 	switch(prom_vers) {
 	case PROM_V0:
-		i = (*(romvec->pv_nbputchar))(c);
+		i = (*(romvec->pv_nbputchar))(*buf);
 		break;
 	case PROM_V2:
 	case PROM_V3:
-		outc = c;
-		if( (*(romvec->pv_v2devops).v2_dev_write)(*romvec->pv_v2bootargs.fd_stdout, &outc, 0x1) == 1)
+		if ((*(romvec->pv_v2devops).v2_dev_write)(*romvec->pv_v2bootargs.fd_stdout,
+							  buf, 0x1) == 1)
 			i = 0;
-		else
-			i = -1;
 		break;
 	default:
-		i = -1;
 		break;
 	};
 	restore_current();
@@ -80,18 +43,14 @@ prom_nbputchar(char c)
 	return i; /* Ugh, we could spin forever on unsupported proms ;( */
 }
 
-/* Blocking version of get character routine above. */
-char
-prom_getchar(void)
+void prom_console_write_buf(const char *buf, int len)
 {
-	int character;
-	while((character = prom_nbgetchar()) == -1) ;
-	return (char) character;
+	while (len) {
+		int n = prom_nbputchar(buf);
+		if (n)
+			continue;
+		len--;
+		buf++;
+	}
 }
 
-/* Blocking version of put character routine above. */
-void
-prom_putchar(char c)
-{
-	while(prom_nbputchar(c) == -1) ;
-}
diff --git a/arch/sparc/prom/console_64.c b/arch/sparc/prom/console_64.c
index 10322dc..ed39e75 100644
--- a/arch/sparc/prom/console_64.c
+++ b/arch/sparc/prom/console_64.c
@@ -15,85 +15,34 @@
 
 extern int prom_stdin, prom_stdout;
 
-/* Non blocking get character from console input device, returns -1
- * if no input was taken.  This can be used for polling.
- */
-inline int
-prom_nbgetchar(void)
-{
-	unsigned long args[7];
-	char inc;
-
-	args[0] = (unsigned long) "read";
-	args[1] = 3;
-	args[2] = 1;
-	args[3] = (unsigned int) prom_stdin;
-	args[4] = (unsigned long) &inc;
-	args[5] = 1;
-	args[6] = (unsigned long) -1;
-
-	p1275_cmd_direct(args);
-
-	if (args[6] == 1)
-		return inc;
-	return -1;
-}
-
-/* Non blocking put character to console device, returns -1 if
- * unsuccessful.
- */
-inline int
-prom_nbputchar(char c)
+static int __prom_console_write_buf(const char *buf, int len)
 {
 	unsigned long args[7];
-	char outc;
-	
-	outc = c;
+	int ret;
 
 	args[0] = (unsigned long) "write";
 	args[1] = 3;
 	args[2] = 1;
 	args[3] = (unsigned int) prom_stdout;
-	args[4] = (unsigned long) &outc;
-	args[5] = 1;
+	args[4] = (unsigned long) buf;
+	args[5] = (unsigned int) len;
 	args[6] = (unsigned long) -1;
 
 	p1275_cmd_direct(args);
 
-	if (args[6] == 1)
-		return 0;
-	else
+	ret = (int) args[6];
+	if (ret < 0)
 		return -1;
+	return ret;
 }
 
-/* Blocking version of get character routine above. */
-char
-prom_getchar(void)
-{
-	int character;
-	while((character = prom_nbgetchar()) == -1) ;
-	return (char) character;
-}
-
-/* Blocking version of put character routine above. */
-void
-prom_putchar(char c)
+void prom_console_write_buf(const char *buf, int len)
 {
-	prom_nbputchar(c);
-}
-
-void
-prom_puts(const char *s, int len)
-{
-	unsigned long args[7];
-
-	args[0] = (unsigned long) "write";
-	args[1] = 3;
-	args[2] = 1;
-	args[3] = (unsigned int) prom_stdout;
-	args[4] = (unsigned long) s;
-	args[5] = len;
-	args[6] = (unsigned long) -1;
-
-	p1275_cmd_direct(args);
+	while (len) {
+		int n = __prom_console_write_buf(buf, len);
+		if (n < 0)
+			continue;
+		len -= n;
+		buf += len;
+	}
 }
diff --git a/arch/sparc/prom/devops_32.c b/arch/sparc/prom/devops_32.c
deleted file mode 100644
index 9c5d468..0000000
--- a/arch/sparc/prom/devops_32.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * devops.c:  Device operations using the PROM.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-
-#include <asm/openprom.h>
-#include <asm/oplib.h>
-
-extern void restore_current(void);
-
-/* Open the device described by the string 'dstr'.  Returns the handle
- * to that device used for subsequent operations on that device.
- * Returns -1 on failure.
- */
-int
-prom_devopen(char *dstr)
-{
-	int handle;
-	unsigned long flags;
-	spin_lock_irqsave(&prom_lock, flags);
-	switch(prom_vers) {
-	case PROM_V0:
-		handle = (*(romvec->pv_v0devops.v0_devopen))(dstr);
-		if(handle == 0) handle = -1;
-		break;
-	case PROM_V2:
-	case PROM_V3:
-		handle = (*(romvec->pv_v2devops.v2_dev_open))(dstr);
-		break;
-	default:
-		handle = -1;
-		break;
-	};
-	restore_current();
-	spin_unlock_irqrestore(&prom_lock, flags);
-
-	return handle;
-}
-
-/* Close the device described by device handle 'dhandle'. */
-int
-prom_devclose(int dhandle)
-{
-	unsigned long flags;
-	spin_lock_irqsave(&prom_lock, flags);
-	switch(prom_vers) {
-	case PROM_V0:
-		(*(romvec->pv_v0devops.v0_devclose))(dhandle);
-		break;
-	case PROM_V2:
-	case PROM_V3:
-		(*(romvec->pv_v2devops.v2_dev_close))(dhandle);
-		break;
-	default:
-		break;
-	};
-	restore_current();
-	spin_unlock_irqrestore(&prom_lock, flags);
-	return 0;
-}
-
-/* Seek to specified location described by 'seekhi' and 'seeklo'
- * for device 'dhandle'.
- */
-void
-prom_seek(int dhandle, unsigned int seekhi, unsigned int seeklo)
-{
-	unsigned long flags;
-	spin_lock_irqsave(&prom_lock, flags);
-	switch(prom_vers) {
-	case PROM_V0:
-		(*(romvec->pv_v0devops.v0_seekdev))(dhandle, seekhi, seeklo);
-		break;
-	case PROM_V2:
-	case PROM_V3:
-		(*(romvec->pv_v2devops.v2_dev_seek))(dhandle, seekhi, seeklo);
-		break;
-	default:
-		break;
-	};
-	restore_current();
-	spin_unlock_irqrestore(&prom_lock, flags);
-}
diff --git a/arch/sparc/prom/devops_64.c b/arch/sparc/prom/devops_64.c
deleted file mode 100644
index a017119..0000000
--- a/arch/sparc/prom/devops_64.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * devops.c:  Device operations using the PROM.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- * Copyright (C) 1996,1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-
-#include <asm/openprom.h>
-#include <asm/oplib.h>
-
-/* Open the device described by the string 'dstr'.  Returns the handle
- * to that device used for subsequent operations on that device.
- * Returns 0 on failure.
- */
-int
-prom_devopen(const char *dstr)
-{
-	unsigned long args[5];
-
-	args[0] = (unsigned long) "open";
-	args[1] = 1;
-	args[2] = 1;
-	args[3] = (unsigned long) dstr;
-	args[4] = (unsigned long) -1;
-
-	p1275_cmd_direct(args);
-
-	return (int) args[4];
-}
-
-/* Close the device described by device handle 'dhandle'. */
-int
-prom_devclose(int dhandle)
-{
-	unsigned long args[4];
-
-	args[0] = (unsigned long) "close";
-	args[1] = 1;
-	args[2] = 0;
-	args[3] = (unsigned int) dhandle;
-
-	p1275_cmd_direct(args);
-
-	return 0;
-}
-
-/* Seek to specified location described by 'seekhi' and 'seeklo'
- * for device 'dhandle'.
- */
-void
-prom_seek(int dhandle, unsigned int seekhi, unsigned int seeklo)
-{
-	unsigned long args[7];
-
-	args[0] = (unsigned long) "seek";
-	args[1] = 3;
-	args[2] = 1;
-	args[3] = (unsigned int) dhandle;
-	args[4] = seekhi;
-	args[5] = seeklo;
-	args[6] = (unsigned long) -1;
-
-	p1275_cmd_direct(args);
-}
diff --git a/arch/sparc/prom/misc_64.c b/arch/sparc/prom/misc_64.c
index d24bc44..e4f31d4 100644
--- a/arch/sparc/prom/misc_64.c
+++ b/arch/sparc/prom/misc_64.c
@@ -18,7 +18,7 @@
 #include <asm/system.h>
 #include <asm/ldc.h>
 
-int prom_service_exists(const char *service_name)
+static int prom_service_exists(const char *service_name)
 {
 	unsigned long args[5];
 
@@ -150,20 +150,6 @@ void prom_halt_power_off(void)
 	prom_halt();
 }
 
-/* Set prom sync handler to call function 'funcp'. */
-void prom_setcallback(callback_func_t funcp)
-{
-	unsigned long args[5];
-	if (!funcp)
-		return;
-	args[0] = (unsigned long) "set-callback";
-	args[1] = 1;
-	args[2] = 1;
-	args[3] = (unsigned long) funcp;
-	args[4] = (unsigned long) -1;
-	p1275_cmd_direct(args);
-}
-
 /* Get the idprom and stuff it into buffer 'idbuf'.  Returns the
  * format type.  'num_bytes' is the number of bytes that your idbuf
  * has space for.  Returns 0xff on error.
diff --git a/arch/sparc/prom/printf.c b/arch/sparc/prom/printf.c
index ca86926..d9682f0 100644
--- a/arch/sparc/prom/printf.c
+++ b/arch/sparc/prom/printf.c
@@ -15,22 +15,45 @@
 
 #include <linux/kernel.h>
 #include <linux/compiler.h>
+#include <linux/spinlock.h>
 
 #include <asm/openprom.h>
 #include <asm/oplib.h>
 
+#define CONSOLE_WRITE_BUF_SIZE	1024
+
 static char ppbuf[1024];
+static char console_write_buf[CONSOLE_WRITE_BUF_SIZE];
+static DEFINE_RAW_SPINLOCK(console_write_lock);
 
 void notrace prom_write(const char *buf, unsigned int n)
 {
-	char ch;
+	unsigned int dest_len;
+	unsigned long flags;
+	char *dest;
+
+	dest = console_write_buf;
+	raw_spin_lock_irqsave(&console_write_lock, flags);
 
-	while (n != 0) {
-		--n;
-		if ((ch = *buf++) == '\n')
-			prom_putchar('\r');
-		prom_putchar(ch);
+	dest_len = 0;
+	while (n-- != 0) {
+		char ch = *buf++;
+		if (ch == '\n') {
+			*dest++ = '\r';
+			dest_len++;
+		}
+		*dest++ = ch;
+		dest_len++;
+		if (dest_len >= CONSOLE_WRITE_BUF_SIZE - 1) {
+			prom_console_write_buf(console_write_buf, dest_len);
+			dest = console_write_buf;
+			dest_len = 0;
+		}
 	}
+	if (dest_len)
+		prom_console_write_buf(console_write_buf, dest_len);
+
+	raw_spin_unlock_irqrestore(&console_write_lock, flags);
 }
 
 void notrace prom_printf(const char *fmt, ...)
diff --git a/arch/sparc/prom/tree_32.c b/arch/sparc/prom/tree_32.c
index 63e08e1..535e2e6 100644
--- a/arch/sparc/prom/tree_32.c
+++ b/arch/sparc/prom/tree_32.c
@@ -342,19 +342,3 @@ phandle prom_inst2pkg(int inst)
 	if (node == -1) return 0;
 	return node;
 }
-
-/* Return 'node' assigned to a particular prom 'path'
- * FIXME: Should work for v0 as well
- */
-phandle prom_pathtoinode(char *path)
-{
-	phandle node;
-	int inst;
-	
-	inst = prom_devopen (path);
-	if (inst == -1) return 0;
-	node = prom_inst2pkg (inst);
-	prom_devclose (inst);
-	if (node == -1) return 0;
-	return node;
-}
diff --git a/arch/sparc/prom/tree_64.c b/arch/sparc/prom/tree_64.c
index 691be68..d936600 100644
--- a/arch/sparc/prom/tree_64.c
+++ b/arch/sparc/prom/tree_64.c
@@ -374,24 +374,6 @@ inline phandle prom_inst2pkg(int inst)
 	return node;
 }
 
-/* Return 'node' assigned to a particular prom 'path'
- * FIXME: Should work for v0 as well
- */
-phandle prom_pathtoinode(const char *path)
-{
-	phandle node;
-	int inst;
-
-	inst = prom_devopen (path);
-	if (inst == 0)
-		return 0;
-	node = prom_inst2pkg(inst);
-	prom_devclose(inst);
-	if (node == -1)
-		return 0;
-	return node;
-}
-
 int prom_ihandle2path(int handle, char *buffer, int bufsize)
 {
 	unsigned long args[7];
diff --git a/arch/x86/crypto/ghash-clmulni-intel_glue.c b/arch/x86/crypto/ghash-clmulni-intel_glue.c
index cbcc8d8..7a6e68e 100644
--- a/arch/x86/crypto/ghash-clmulni-intel_glue.c
+++ b/arch/x86/crypto/ghash-clmulni-intel_glue.c
@@ -10,6 +10,7 @@
  * by the Free Software Foundation.
  */
 
+#include <linux/err.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
diff --git a/arch/x86/include/asm/pvclock.h b/arch/x86/include/asm/pvclock.h
index 7f7e577..31d84ac 100644
--- a/arch/x86/include/asm/pvclock.h
+++ b/arch/x86/include/asm/pvclock.h
@@ -11,6 +11,7 @@ unsigned long pvclock_tsc_khz(struct pvclock_vcpu_time_info *src);
 void pvclock_read_wallclock(struct pvclock_wall_clock *wall,
 			    struct pvclock_vcpu_time_info *vcpu,
 			    struct timespec *ts);
+void pvclock_resume(void);
 
 /*
  * Scale a 64-bit delta by scaling and multiplying by a 32-bit fraction,
diff --git a/arch/x86/kernel/pvclock.c b/arch/x86/kernel/pvclock.c
index 008b91e..42eb330 100644
--- a/arch/x86/kernel/pvclock.c
+++ b/arch/x86/kernel/pvclock.c
@@ -83,6 +83,11 @@ unsigned long pvclock_tsc_khz(struct pvclock_vcpu_time_info *src)
 
 static atomic64_t last_value = ATOMIC64_INIT(0);
 
+void pvclock_resume(void)
+{
+	atomic64_set(&last_value, 0);
+}
+
 cycle_t pvclock_clocksource_read(struct pvclock_vcpu_time_info *src)
 {
 	struct pvclock_shadow_time shadow;
diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c
index b2bb5aa3..5da5e53 100644
--- a/arch/x86/xen/time.c
+++ b/arch/x86/xen/time.c
@@ -426,6 +426,8 @@ void xen_timer_resume(void)
 {
 	int cpu;
 
+	pvclock_resume();
+
 	if (xen_clockevent != &xen_vcpuop_clockevent)
 		return;