ARM: OMAP AM35xx: clock and hwmod data: fix UART4 data

Add missing terminators to the arrays of IRQ, DMA, and address space
structure records in the AM35xx UART4 hwmod data.  Without these
terminators, the following warnings appear on boot:

omap_uart.3: failed to claim resource 58
omap_device: omap_uart: build failed (-16)
WARNING: at /home/paul/linux/arch/arm/mach-omap2/serial.c:375 omap_serial_init_port+0x198/0x284()
Could not build omap_device for omap_uart: uart4.

Also, AM35xx uart4_fck has an incorrect parent clock pointer.  Fix it
and clean up a whitespace issue.

Fix some incorrectly-named macros related to AM35xx UART4.

Cc: Kyle Manna <kyle.manna@fuel7.com>
Cc: Mark A. Greer <mgreer@animalcreek.com>
Cc: Ranjith Lohithakshan <ranjithl@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Tested-by: Mark A. Greer <mgreer@animalcreek.com>

4 files changed, 16 insertions, 13 deletions

diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index 15e6504..58c6e47 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -2490,13 +2490,13 @@ static struct clk uart4_fck = {
 };
 
 static struct clk uart4_fck_am35xx = {
-	.name           = "uart4_fck",
-	.ops            = &clkops_omap2_dflt_wait,
-	.parent         = &per_48m_fck,
-	.enable_reg     = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit     = OMAP3430_EN_UART4_SHIFT,
-	.clkdm_name     = "core_l4_clkdm",
-	.recalc         = &followparent_recalc,
+	.name		= "uart4_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= AM35XX_EN_UART4_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
 };
 
 static struct clk gpt2_fck = {
diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h
index 8083a8c..766338f 100644
--- a/arch/arm/mach-omap2/cm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-34xx.h
@@ -169,8 +169,6 @@
 /* AM35XX specific CM_ICLKEN1_CORE bits */
 #define AM35XX_EN_IPSS_MASK				(1 << 4)
 #define AM35XX_EN_IPSS_SHIFT				4
-#define AM35XX_EN_UART4_MASK				(1 << 23)
-#define AM35XX_EN_UART4_SHIFT				23
 
 /* CM_ICLKEN2_CORE */
 #define OMAP3430_EN_PKA_MASK				(1 << 4)
@@ -207,6 +205,8 @@
 #define OMAP3430_ST_DES2_MASK				(1 << 26)
 #define OMAP3430_ST_MSPRO_SHIFT				23
 #define OMAP3430_ST_MSPRO_MASK				(1 << 23)
+#define AM35XX_ST_UART4_SHIFT				23
+#define AM35XX_ST_UART4_MASK				(1 << 23)
 #define OMAP3430_ST_HDQ_SHIFT				22
 #define OMAP3430_ST_HDQ_MASK				(1 << 22)
 #define OMAP3430ES1_ST_FAC_SHIFT			8
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 21428fe..2f4889e 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -527,11 +527,13 @@ static struct omap_hwmod omap36xx_uart4_hwmod = {
 
 static struct omap_hwmod_irq_info am35xx_uart4_mpu_irqs[] = {
 	{ .irq = INT_35XX_UART4_IRQ, },
+	{ .irq = -1 }
 };
 
 static struct omap_hwmod_dma_info am35xx_uart4_sdma_reqs[] = {
 	{ .name = "rx", .dma_req = AM35XX_DMA_UART4_RX, },
 	{ .name = "tx", .dma_req = AM35XX_DMA_UART4_TX, },
+	{ .dma_req = -1 }
 };
 
 static struct omap_hwmod am35xx_uart4_hwmod = {
@@ -543,9 +545,9 @@ static struct omap_hwmod am35xx_uart4_hwmod = {
 		.omap2 = {
 			.module_offs = CORE_MOD,
 			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_UART4_SHIFT,
+			.module_bit = AM35XX_EN_UART4_SHIFT,
 			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_EN_UART4_SHIFT,
+			.idlest_idle_bit = AM35XX_ST_UART4_SHIFT,
 		},
 	},
 	.class		= &omap2_uart_class,
@@ -2239,6 +2241,7 @@ static struct omap_hwmod_addr_space am35xx_uart4_addr_space[] = {
 		.pa_end		= OMAP3_UART4_AM35XX_BASE + SZ_1K - 1,
 		.flags		= ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
 	},
+	{ }
 };
 
 static struct omap_hwmod_ocp_if am35xx_l4_core__uart4 = {
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index 6da3ba4..cc1398e 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -203,8 +203,8 @@
 #define OMAP3430_EN_MMC2_SHIFT				25
 #define OMAP3430_EN_MMC1_MASK				(1 << 24)
 #define OMAP3430_EN_MMC1_SHIFT				24
-#define OMAP3430_EN_UART4_MASK				(1 << 23)
-#define OMAP3430_EN_UART4_SHIFT				23
+#define AM35XX_EN_UART4_MASK				(1 << 23)
+#define AM35XX_EN_UART4_SHIFT				23
 #define OMAP3430_EN_MCSPI4_MASK				(1 << 21)
 #define OMAP3430_EN_MCSPI4_SHIFT			21
 #define OMAP3430_EN_MCSPI3_MASK				(1 << 20)