tree-wide: fix comment/printk typos

"gadget", "through", "command", "maintain", "maintain", "controller", "address",
"between", "initiali[zs]e", "instead", "function", "select", "already",
"equal", "access", "management", "hierarchy", "registration", "interest",
"relative", "memory", "offset", "already",

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

54 files changed, 67 insertions, 67 deletions

diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c
index 1bec96e..60dc077 100644
--- a/arch/arm/common/it8152.c
+++ b/arch/arm/common/it8152.c
@@ -236,7 +236,7 @@ static struct resource it8152_mem = {
 
 /*
  * The following functions are needed for DMA bouncing.
- * ITE8152 chip can addrees up to 64MByte, so all the devices
+ * ITE8152 chip can address up to 64MByte, so all the devices
  * connected to ITE8152 (PCI and USB) should have limited DMA window
  */
 
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index ba65f6e..cb660bc 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -70,7 +70,7 @@ static inline struct vic_device *to_vic(struct sys_device *sys)
  * vic_init2 - common initialisation code
  * @base: Base of the VIC.
  *
- * Common initialisation code for registeration
+ * Common initialisation code for registration
  * and resume.
 */
 static void vic_init2(void __iomem *base)
diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
index 7b58c94..de2fd04 100644
--- a/arch/arm/mach-at91/board-ecbat91.c
+++ b/arch/arm/mach-at91/board-ecbat91.c
@@ -128,17 +128,17 @@ static struct spi_board_info __initdata ecb_at91spi_devices[] = {
 		.platform_data	= &my_flash0_platform,
 #endif
 	},
-	{	/* User accessable spi - cs1 (250KHz) */
+	{	/* User accessible spi - cs1 (250KHz) */
 		.modalias	= "spi-cs1",
 		.chip_select	= 1,
 		.max_speed_hz	= 250 * 1000,
 	},
-	{	/* User accessable spi - cs2 (1MHz) */
+	{	/* User accessible spi - cs2 (1MHz) */
 		.modalias	= "spi-cs2",
 		.chip_select	= 2,
 		.max_speed_hz	= 1 * 1000 * 1000,
 	},
-	{	/* User accessable spi - cs3 (10MHz) */
+	{	/* User accessible spi - cs3 (10MHz) */
 		.modalias	= "spi-cs3",
 		.chip_select	= 3,
 		.max_speed_hz	= 10 * 1000 * 1000,
diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw.c
index b3a61d8..96273ff 100644
--- a/arch/arm/mach-bcmring/csp/chipc/chipcHw.c
+++ b/arch/arm/mach-bcmring/csp/chipc/chipcHw.c
@@ -757,7 +757,7 @@ static int chipcHw_divide(int num, int denom)
 		t = t << 1;
 	}
 
-	/* Intialize the result */
+	/* Initialize the result */
 	r = 0;
 
 	do {
diff --git a/arch/arm/mach-bcmring/csp/dmac/dmacHw.c b/arch/arm/mach-bcmring/csp/dmac/dmacHw.c
index 7b9bac2..6b9be2e 100644
--- a/arch/arm/mach-bcmring/csp/dmac/dmacHw.c
+++ b/arch/arm/mach-bcmring/csp/dmac/dmacHw.c
@@ -893,7 +893,7 @@ int dmacHw_setDataDescriptor(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration
 */
 /****************************************************************************/
 uint32_t dmacHw_getDmaControllerAttribute(dmacHw_HANDLE_t handle,	/*  [ IN ]  DMA Channel handle */
-					  dmacHw_CONTROLLER_ATTRIB_e attr	/*  [ IN ]  DMA Controler attribute of type  dmacHw_CONTROLLER_ATTRIB_e */
+					  dmacHw_CONTROLLER_ATTRIB_e attr	/*  [ IN ]  DMA Controller attribute of type  dmacHw_CONTROLLER_ATTRIB_e */
     ) {
 	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
 
diff --git a/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c
index ff7b436..77f84b4 100644
--- a/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c
+++ b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c
@@ -316,7 +316,7 @@ static void DisplayDescRing(void *pDescriptor,	/*   [ IN ] Descriptor buffer */
 /**
 *  @brief   Check if DMA channel is the flow controller
 *
-*  @return  1 : If DMA is a flow controler
+*  @return  1 : If DMA is a flow controller
 *           0 : Peripheral is the flow controller
 *
 *  @note
diff --git a/arch/arm/mach-bcmring/csp/tmr/tmrHw.c b/arch/arm/mach-bcmring/csp/tmr/tmrHw.c
index 5c1c9a0..16225e4 100644
--- a/arch/arm/mach-bcmring/csp/tmr/tmrHw.c
+++ b/arch/arm/mach-bcmring/csp/tmr/tmrHw.c
@@ -558,7 +558,7 @@ static int tmrHw_divide(int num, int denom)
 		t = t << 1;
 	}
 
-	/* Intialize the result */
+	/* Initialize the result */
 	r = 0;
 
 	do {
diff --git a/arch/arm/mach-bcmring/dma.c b/arch/arm/mach-bcmring/dma.c
index 77eb35c..8d1baf3 100644
--- a/arch/arm/mach-bcmring/dma.c
+++ b/arch/arm/mach-bcmring/dma.c
@@ -671,7 +671,7 @@ static int ConfigChannel(DMA_Handle_t handle)
 
 /****************************************************************************/
 /**
-*   Intializes all of the data structures associated with the DMA.
+*   Initializes all of the data structures associated with the DMA.
 *   @return
 *       >= 0    - Initialization was successfull.
 *
diff --git a/arch/arm/mach-bcmring/include/csp/dmacHw.h b/arch/arm/mach-bcmring/include/csp/dmacHw.h
index 5d51013..6c8da2b 100644
--- a/arch/arm/mach-bcmring/include/csp/dmacHw.h
+++ b/arch/arm/mach-bcmring/include/csp/dmacHw.h
@@ -590,7 +590,7 @@ void dmacHw_printDebugInfo(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle
 */
 /****************************************************************************/
 uint32_t dmacHw_getDmaControllerAttribute(dmacHw_HANDLE_t handle,	/*  [ IN ]  DMA Channel handle  */
-					  dmacHw_CONTROLLER_ATTRIB_e attr	/*  [ IN ]  DMA Controler attribute of type  dmacHw_CONTROLLER_ATTRIB_e */
+					  dmacHw_CONTROLLER_ATTRIB_e attr	/*  [ IN ]  DMA Controller attribute of type  dmacHw_CONTROLLER_ATTRIB_e */
     );
 
 #endif /* _DMACHW_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
index cbf334d..d67e2f8 100644
--- a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
+++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
@@ -28,7 +28,7 @@
 
 /* Data type for DMA Link List Item */
 typedef struct {
-	uint32_t sar;		/* Source Adress Register.
+	uint32_t sar;		/* Source Address Register.
 				   Address must be aligned to CTLx.SRC_TR_WIDTH.             */
 	uint32_t dar;		/* Destination Address Register.
 				   Address must be aligned to CTLx.DST_TR_WIDTH.             */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h
index 891cea8..f1ecf96 100644
--- a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h
+++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h
@@ -35,7 +35,7 @@ typedef struct {
 
 /* Data type representing DMA channel registers */
 typedef struct {
-	dmacHw_REG64_t ChannelSar;	/*  Source Adress Register. 64 bits (upper 32 bits are reserved)
+	dmacHw_REG64_t ChannelSar;	/*  Source Address Register. 64 bits (upper 32 bits are reserved)
 					   Address must be aligned to CTLx.SRC_TR_WIDTH.
 					 */
 	dmacHw_REG64_t ChannelDar;	/*  Destination Address Register.64 bits (upper 32 bits are reserved)
diff --git a/arch/arm/mach-gemini/include/mach/hardware.h b/arch/arm/mach-gemini/include/mach/hardware.h
index 213a4fc..8c950e1 100644
--- a/arch/arm/mach-gemini/include/mach/hardware.h
+++ b/arch/arm/mach-gemini/include/mach/hardware.h
@@ -33,7 +33,7 @@
 #define GEMINI_LPC_HOST_BASE	0x47000000
 #define GEMINI_LPC_IO_BASE	0x47800000
 #define GEMINI_INTERRUPT_BASE	0x48000000
-/* TODO: Different interrupt controlers when SMP
+/* TODO: Different interrupt controllers when SMP
  * #define GEMINI_INTERRUPT0_BASE	0x48000000
  * #define GEMINI_INTERRUPT1_BASE	0x49000000
  */
diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c
index d36b610..7f8d15d 100644
--- a/arch/arm/mach-msm/io.c
+++ b/arch/arm/mach-msm/io.c
@@ -153,7 +153,7 @@ __msm_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype)
 {
 	if (mtype == MT_DEVICE) {
 		/* The peripherals in the 88000000 - D0000000 range
-		 * are only accessable by type MT_DEVICE_NONSHARED.
+		 * are only accessible by type MT_DEVICE_NONSHARED.
 		 * Adjust mtype as necessary to make this "just work."
 		 */
 		if ((phys_addr >= 0x88000000) && (phys_addr < 0xD0000000))
diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c
index 0d50b45..1e6fe6d 100644
--- a/arch/arm/mach-omap2/cpuidle34xx.c
+++ b/arch/arm/mach-omap2/cpuidle34xx.c
@@ -252,7 +252,7 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev,
 	 * FIXME: we currently manage device-specific idle states
 	 *        for PER and CORE in combination with CPU-specific
 	 *        idle states.  This is wrong, and device-specific
-	 *        idle managment needs to be separated out into 
+	 *        idle management needs to be separated out into 
 	 *        its own code.
 	 */
 
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index becf0e3..db79ac6 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -843,7 +843,7 @@ void __init omap_serial_init_port(int port)
 }
 
 /**
- * omap_serial_init() - intialize all supported serial ports
+ * omap_serial_init() - initialize all supported serial ports
  *
  * Initializes all available UARTs as serial ports. Platforms
  * can call this function when they want to have default behaviour
diff --git a/arch/arm/mach-pxa/mxm8x10.c b/arch/arm/mach-pxa/mxm8x10.c
index 462167a..cdf7f41 100644
--- a/arch/arm/mach-pxa/mxm8x10.c
+++ b/arch/arm/mach-pxa/mxm8x10.c
@@ -337,7 +337,7 @@ void __init mxm_8x10_mmc_init(void)
 }
 #endif
 
-/* USB Open Host Controler Interface */
+/* USB Open Host Controller Interface */
 static struct pxaohci_platform_data mxm_8x10_ohci_platform_data = {
 	.port_mode = PMM_NPS_MODE,
 	.flags = ENABLE_PORT_ALL
diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c
index e7d03ab..372ea68 100644
--- a/arch/arm/mach-s3c64xx/dma.c
+++ b/arch/arm/mach-s3c64xx/dma.c
@@ -740,7 +740,7 @@ static int __init s3c64xx_dma_init(void)
 	/* Set all DMA configuration to be DMA, not SDMA */
 	writel(0xffffff, S3C_SYSREG(0x110));
 
-	/* Register standard DMA controlers */
+	/* Register standard DMA controllers */
 	s3c64xx_dma_init1(0, DMACH_UART0, IRQ_DMA0, 0x75000000);
 	s3c64xx_dma_init1(8, DMACH_PCM1_TX, IRQ_DMA1, 0x75100000);
 
diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c
index 3560f8c..5aa2d54 100644
--- a/arch/arm/mach-spear3xx/spear300.c
+++ b/arch/arm/mach-spear3xx/spear300.c
@@ -371,7 +371,7 @@ struct pmx_driver pmx_driver = {
 };
 
 /* Add spear300 specific devices here */
-/* arm gpio1 device registeration */
+/* arm gpio1 device registration */
 static struct pl061_platform_data gpio1_plat_data = {
 	.gpio_base	= 8,
 	.irq_base	= SPEAR_GPIO1_INT_BASE,
@@ -451,7 +451,7 @@ void __init spear300_init(void)
 	/* call spear3xx family common init function */
 	spear3xx_init();
 
-	/* shared irq registeration */
+	/* shared irq registration */
 	shirq_ras1.regs.base =
 		ioremap(SPEAR300_TELECOM_BASE, SPEAR300_TELECOM_REG_SIZE);
 	if (shirq_ras1.regs.base) {
diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c
index 96a1ab8..53b41b5 100644
--- a/arch/arm/mach-spear3xx/spear310.c
+++ b/arch/arm/mach-spear3xx/spear310.c
@@ -266,7 +266,7 @@ void __init spear310_init(void)
 	/* call spear3xx family common init function */
 	spear3xx_init();
 
-	/* shared irq registeration */
+	/* shared irq registration */
 	base = ioremap(SPEAR310_SOC_CONFIG_BASE, SPEAR310_SOC_CONFIG_SIZE);
 	if (base) {
 		/* shirq 1 */
diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c
index 6a121954..88b4652 100644
--- a/arch/arm/mach-spear3xx/spear320.c
+++ b/arch/arm/mach-spear3xx/spear320.c
@@ -519,7 +519,7 @@ void __init spear320_init(void)
 	/* call spear3xx family common init function */
 	spear3xx_init();
 
-	/* shared irq registeration */
+	/* shared irq registration */
 	base = ioremap(SPEAR320_SOC_CONFIG_BASE, SPEAR320_SOC_CONFIG_SIZE);
 	if (base) {
 		/* shirq 1 */
diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c
index e87313a..52f553c 100644
--- a/arch/arm/mach-spear3xx/spear3xx.c
+++ b/arch/arm/mach-spear3xx/spear3xx.c
@@ -22,7 +22,7 @@
 #include <mach/spear.h>
 
 /* Add spear3xx machines common devices here */
-/* gpio device registeration */
+/* gpio device registration */
 static struct pl061_platform_data gpio_plat_data = {
 	.gpio_base	= 0,
 	.irq_base	= SPEAR_GPIO_INT_BASE,
@@ -41,7 +41,7 @@ struct amba_device gpio_device = {
 	.irq = {IRQ_BASIC_GPIO, NO_IRQ},
 };
 
-/* uart device registeration */
+/* uart device registration */
 struct amba_device uart_device = {
 	.dev = {
 		.init_name = "uart",
@@ -543,6 +543,6 @@ void spear_pmx_init(struct pmx_driver *pmx_driver, uint base, uint size)
 
 pmx_fail:
 	if (ret)
-		printk(KERN_ERR "padmux: registeration failed. err no: %d\n",
+		printk(KERN_ERR "padmux: registration failed. err no: %d\n",
 				ret);
 }
diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c
index baf6bcc..f2fe14e 100644
--- a/arch/arm/mach-spear6xx/spear6xx.c
+++ b/arch/arm/mach-spear6xx/spear6xx.c
@@ -23,7 +23,7 @@
 #include <mach/spear.h>
 
 /* Add spear6xx machines common devices here */
-/* uart device registeration */
+/* uart device registration */
 struct amba_device uart_device[] = {
 	{
 		.dev = {
@@ -50,7 +50,7 @@ struct amba_device uart_device[] = {
 	}
 };
 
-/* gpio device registeration */
+/* gpio device registration */
 static struct pl061_platform_data gpio_plat_data[] = {
 	{
 		.gpio_base	= 0,
diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig
index 801b21e..32a7b0f 100644
--- a/arch/arm/mach-u300/Kconfig
+++ b/arch/arm/mach-u300/Kconfig
@@ -64,7 +64,7 @@ config MACH_U300_DUAL_RAM
 	bool "Dual RAM"
 	help
 		Select this if you want support for Dual RAM phones.
-		This is two RAM memorys on different EMIFs.
+		This is two RAM memories on different EMIFs.
 endchoice
 
 config U300_DEBUG
diff --git a/arch/arm/mach-u300/include/mach/coh901318.h b/arch/arm/mach-u300/include/mach/coh901318.h
index 193da2d..6193aaa 100644
--- a/arch/arm/mach-u300/include/mach/coh901318.h
+++ b/arch/arm/mach-u300/include/mach/coh901318.h
@@ -24,7 +24,7 @@
  * @src_addr: transfer source address
  * @dst_addr: transfer destination address
  * @link_addr:  physical address to next lli
- * @virt_link_addr: virtual addres of next lli (only used by pool_free)
+ * @virt_link_addr: virtual address of next lli (only used by pool_free)
  * @phy_this: physical address of current lli (only used by pool_free)
  */
 struct coh901318_lli {
@@ -90,7 +90,7 @@ struct powersave {
  * struct coh901318_platform - platform arch structure
  * @chans_slave: specifying dma slave channels
  * @chans_memcpy: specifying dma memcpy channels
- * @access_memory_state: requesting DMA memeory access (on / off)
+ * @access_memory_state: requesting DMA memory access (on / off)
  * @chan_conf: dma channel configurations
  * @max_channels: max number of dma chanenls
  */
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index 86781f7..664c453 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -66,7 +66,7 @@ extern int imx_irq_set_priority(unsigned char irq, unsigned char prio);
 
 /* all normal IRQs can be FIQs */
 #define FIQ_START	0
-/* switch betwean IRQ and FIQ */
+/* switch between IRQ and FIQ */
 extern int mxc_set_irq_fiq(unsigned int irq, unsigned int type);
 
 #endif /* __ASM_ARCH_MXC_IRQS_H__ */
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 7eaa8ed..79ac24c 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -339,7 +339,7 @@ struct omap_hwmod_omap2_prcm {
 /**
  * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data
  * @clkctrl_reg: PRCM address of the clock control register
- * @rstctrl_reg: adress of the XXX_RSTCTRL register located in the PRM
+ * @rstctrl_reg: address of the XXX_RSTCTRL register located in the PRM
  * @submodule_wkdep_bit: bit shift of the WKDEP range
  */
 struct omap_hwmod_omap4_prcm {
diff --git a/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h b/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h
index 5f84913..750f4d8 100644
--- a/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h
+++ b/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h
@@ -1197,7 +1197,7 @@
 #define	SADD_LEN	0x0002		/* Slave Address Length							*/
 #define	STDVAL		0x0004		/* Slave Transmit Data Valid					*/
 #define	NAK			0x0008		/* NAK/ACK* Generated At Conclusion Of Transfer */
-#define	GEN			0x0010		/* General Call Adrress Matching Enabled		*/
+#define	GEN			0x0010		/* General Call Address Matching Enabled		*/
 
 /* TWI_SLAVE_STAT Masks															*/
 #define	SDIR		0x0001		/* Slave Transfer Direction (Transmit/Receive*)	*/
diff --git a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
index 0947503..e3ab78e 100644
--- a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
+++ b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
@@ -1206,7 +1206,7 @@
 #define	SADD_LEN	0x0002		/* Slave Address Length							*/
 #define	STDVAL		0x0004		/* Slave Transmit Data Valid					*/
 #define	NAK			0x0008		/* NAK/ACK* Generated At Conclusion Of Transfer */
-#define	GEN			0x0010		/* General Call Adrress Matching Enabled		*/
+#define	GEN			0x0010		/* General Call Address Matching Enabled		*/
 
 /* TWI_SLAVE_STAT Masks															*/
 #define	SDIR		0x0001		/* Slave Transfer Direction (Transmit/Receive*)	*/
diff --git a/arch/blackfin/mach-bf537/include/mach/defBF534.h b/arch/blackfin/mach-bf537/include/mach/defBF534.h
index 0323e6b..042064b 100644
--- a/arch/blackfin/mach-bf537/include/mach/defBF534.h
+++ b/arch/blackfin/mach-bf537/include/mach/defBF534.h
@@ -1523,7 +1523,7 @@
 #define	SADD_LEN	0x0002	/* Slave Address Length                                                 */
 #define	STDVAL		0x0004	/* Slave Transmit Data Valid                                    */
 #define	NAK			0x0008	/* NAK/ACK* Generated At Conclusion Of Transfer */
-#define	GEN			0x0010	/* General Call Adrress Matching Enabled                */
+#define	GEN			0x0010	/* General Call Address Matching Enabled                */
 
 /* TWI_SLAVE_STAT Masks															*/
 #define	SDIR		0x0001	/* Slave Transfer Direction (Transmit/Receive*) */
diff --git a/arch/blackfin/mach-bf538/include/mach/defBF539.h b/arch/blackfin/mach-bf538/include/mach/defBF539.h
index 7a8ac5f..d85d128 100644
--- a/arch/blackfin/mach-bf538/include/mach/defBF539.h
+++ b/arch/blackfin/mach-bf538/include/mach/defBF539.h
@@ -2185,7 +2185,7 @@
 #define	SADD_LEN	0x0002		/* Slave Address Length */
 #define	STDVAL		0x0004		/* Slave Transmit Data Valid */
 #define	NAK			0x0008		/* NAK/ACK* Generated At Conclusion Of Transfer */
-#define	GEN			0x0010		/* General Call	Adrress	Matching Enabled */
+#define	GEN			0x0010		/* General Call	Address	Matching Enabled */
 
 /* TWIx_SLAVE_STAT Masks								 */
 #define	SDIR		0x0001		/* Slave Transfer Direction (Transmit/Receive*) */
diff --git a/arch/cris/arch-v32/lib/nand_init.S b/arch/cris/arch-v32/lib/nand_init.S
index e705f5c..d671fed 100644
--- a/arch/cris/arch-v32/lib/nand_init.S
+++ b/arch/cris/arch-v32/lib/nand_init.S
@@ -139,7 +139,7 @@ copy_nand_to_ram:
 	lsrq	8, $r4
 	move.b	$r4, [$r1]	; Row address
 	lsrq	8, $r4
-	move.b	$r4, [$r1]	; Row adddress
+	move.b	$r4, [$r1]	; Row address
 	moveq	20, $r4
 2:	bne	2b
 	subq	1, $r4
diff --git a/arch/cris/include/asm/etraxgpio.h b/arch/cris/include/asm/etraxgpio.h
index d474818..461c089 100644
--- a/arch/cris/include/asm/etraxgpio.h
+++ b/arch/cris/include/asm/etraxgpio.h
@@ -1,5 +1,5 @@
 /*
- * The following devices are accessable using this driver using
+ * The following devices are accessible using this driver using
  * GPIO_MAJOR (120) and a couple of minor numbers.
  *
  * For ETRAX 100LX (CONFIG_ETRAX_ARCH_V10):
diff --git a/arch/h8300/Kconfig.debug b/arch/h8300/Kconfig.debug
index ee671c3..e8d1b23 100644
--- a/arch/h8300/Kconfig.debug
+++ b/arch/h8300/Kconfig.debug
@@ -48,7 +48,7 @@ config DEFAULT_CMDLINE
 	  builtin kernel commandline enabled.
 
 config KERNEL_COMMAND
-	string "Buildin commmand string"
+	string "Buildin command string"
 	depends on DEFAULT_CMDLINE
 	help
 	  builtin kernel commandline strings.
diff --git a/arch/ia64/kvm/mmio.c b/arch/ia64/kvm/mmio.c
index fb8f9f5..f1e17d3 100644
--- a/arch/ia64/kvm/mmio.c
+++ b/arch/ia64/kvm/mmio.c
@@ -130,7 +130,7 @@ static void mmio_access(struct kvm_vcpu *vcpu, u64 src_pa, u64 *dest,
 
 	local_irq_save(psr);
 
-	/*Intercept the acces for PIB range*/
+	/*Intercept the access for PIB range*/
 	if (iot == GPFN_PIB) {
 		if (!dir)
 			lsapic_write(vcpu, src_pa, s, *dest);
diff --git a/arch/mips/alchemy/common/power.c b/arch/mips/alchemy/common/power.c
index e5916a5..647e518 100644
--- a/arch/mips/alchemy/common/power.c
+++ b/arch/mips/alchemy/common/power.c
@@ -130,7 +130,7 @@ static void restore_core_regs(void)
 	au_writel(sleep_usb[1], USBD_ENABLE);
 	au_sync();
 #else
-	/* enable accces to OTG memory */
+	/* enable access to OTG memory */
 	au_writel(au_readl(USB_MSR_BASE + 4) | (1 << 6), USB_MSR_BASE + 4);
 	au_sync();
 
diff --git a/arch/mips/include/asm/mach-powertv/ioremap.h b/arch/mips/include/asm/mach-powertv/ioremap.h
index 076f2ee..c86ef09 100644
--- a/arch/mips/include/asm/mach-powertv/ioremap.h
+++ b/arch/mips/include/asm/mach-powertv/ioremap.h
@@ -88,7 +88,7 @@ static inline dma_addr_t _dma_to_phys_offset_raw(dma_addr_t dma)
 }
 
 /* These are not portable and should not be used in drivers. Drivers should
- * be using ioremap() and friends to map physical addreses to virtual
+ * be using ioremap() and friends to map physical addresses to virtual
  * addresses and dma_map*() and friends to map virtual addresses into DMA
  * addresses and back.
  */
diff --git a/arch/mips/jz4740/board-qi_lb60.c b/arch/mips/jz4740/board-qi_lb60.c
index 5742bb4..de4433c 100644
--- a/arch/mips/jz4740/board-qi_lb60.c
+++ b/arch/mips/jz4740/board-qi_lb60.c
@@ -65,7 +65,7 @@ static struct nand_ecclayout qi_lb60_ecclayout_1gb = {
 
 /* Early prototypes of the QI LB60 had only 1GB of NAND.
  * In order to support these devices aswell the partition and ecc layout is
- * initalized depending on the NAND size */
+ * initialized depending on the NAND size */
 static struct mtd_partition qi_lb60_partitions_1gb[] = {
 	{
 		.name = "NAND BOOT partition",
@@ -464,7 +464,7 @@ static int __init qi_lb60_board_setup(void)
 	board_gpio_setup();
 
 	if (qi_lb60_init_platform_devices())
-		panic("Failed to initalize platform devices\n");
+		panic("Failed to initialize platform devices\n");
 
 	return 0;
 }
diff --git a/arch/mips/jz4740/gpio.c b/arch/mips/jz4740/gpio.c
index 38f60f3..88e6aed 100644
--- a/arch/mips/jz4740/gpio.c
+++ b/arch/mips/jz4740/gpio.c
@@ -546,7 +546,7 @@ static int __init jz4740_gpio_init(void)
 	for (i = 0; i < ARRAY_SIZE(jz4740_gpio_chips); ++i)
 		jz4740_gpio_chip_init(&jz4740_gpio_chips[i], i);
 
-	printk(KERN_INFO "JZ4740 GPIO initalized\n");
+	printk(KERN_INFO "JZ4740 GPIO initialized\n");
 
 	return 0;
 }
diff --git a/arch/mips/mti-malta/malta-memory.c b/arch/mips/mti-malta/malta-memory.c
index b27419c..a96d281 100644
--- a/arch/mips/mti-malta/malta-memory.c
+++ b/arch/mips/mti-malta/malta-memory.c
@@ -43,7 +43,7 @@ static struct prom_pmemblock mdesc[PROM_MAX_PMEMBLOCKS];
 static char *mtypes[3] = {
 	"Dont use memory",
 	"YAMON PROM memory",
-	"Free memmory",
+	"Free memory",
 };
 #endif
 
diff --git a/arch/mips/pci/pcie-octeon.c b/arch/mips/pci/pcie-octeon.c
index 385f035..0583c463 100644
--- a/arch/mips/pci/pcie-octeon.c
+++ b/arch/mips/pci/pcie-octeon.c
@@ -900,7 +900,7 @@ static int cvmx_pcie_rc_initialize(int pcie_port)
 	mem_access_subid.s.ror = 0;
 	/* Disable Relaxed Ordering for Writes. */
 	mem_access_subid.s.row = 0;
-	/* PCIe Adddress Bits <63:34>. */
+	/* PCIe Address Bits <63:34>. */
 	mem_access_subid.s.ba = 0;
 
 	/*
diff --git a/arch/mips/powertv/memory.c b/arch/mips/powertv/memory.c
index 73880ad..fb3d296 100644
--- a/arch/mips/powertv/memory.c
+++ b/arch/mips/powertv/memory.c
@@ -57,7 +57,7 @@
 unsigned long ptv_memsize;
 
 /*
- * struct low_mem_reserved - Items in low memmory that are reserved
+ * struct low_mem_reserved - Items in low memory that are reserved
  * @start:	Physical address of item
  * @size:	Size, in bytes, of this item
  * @is_aliased:	True if this is RAM aliased from another location. If false,
diff --git a/arch/mips/txx9/generic/pci.c b/arch/mips/txx9/generic/pci.c
index 9a0be81..96e69a0 100644
--- a/arch/mips/txx9/generic/pci.c
+++ b/arch/mips/txx9/generic/pci.c
@@ -107,7 +107,7 @@ int txx9_pci_mem_high __initdata;
 
 /*
  * allocate pci_controller and resources.
- * mem_base, io_base: physical addresss.  0 for auto assignment.
+ * mem_base, io_base: physical address.  0 for auto assignment.
  * mem_size and io_size means max size on auto assignment.
  * pcic must be &txx9_primary_pcic or NULL.
  */
diff --git a/arch/powerpc/include/asm/8xx_immap.h b/arch/powerpc/include/asm/8xx_immap.h
index 4b0e152..6b6dc20 100644
--- a/arch/powerpc/include/asm/8xx_immap.h
+++ b/arch/powerpc/include/asm/8xx_immap.h
@@ -93,7 +93,7 @@ typedef struct	mem_ctlr {
 } memctl8xx_t;
 
 /*-----------------------------------------------------------------------
- * BR - Memory Controler: Base Register					16-9
+ * BR - Memory Controller: Base Register					16-9
  */
 #define BR_BA_MSK	0xffff8000	/* Base Address Mask			*/
 #define BR_AT_MSK	0x00007000	/* Address Type Mask			*/
@@ -110,7 +110,7 @@ typedef struct	mem_ctlr {
 #define BR_V		0x00000001	/* Bank Valid				*/
 
 /*-----------------------------------------------------------------------
- * OR - Memory Controler: Option Register				16-11
+ * OR - Memory Controller: Option Register				16-11
  */
 #define OR_AM_MSK	0xffff8000	/* Address Mask Mask			*/
 #define OR_ATM_MSK	0x00007000	/* Address Type Mask Mask		*/
diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c
index 7fd90d0..c4d2b71 100644
--- a/arch/powerpc/oprofile/op_model_cell.c
+++ b/arch/powerpc/oprofile/op_model_cell.c
@@ -1469,7 +1469,7 @@ static int cell_global_start(struct op_counter_config *ctr)
  * The pm_interval register is setup to write the SPU PC value into the
  * trace buffer at the maximum rate possible.  The trace buffer is configured
  * to store the PCs, wrapping when it is full.  The performance counter is
- * intialized to the max hardware count minus the number of events, N, between
+ * initialized to the max hardware count minus the number of events, N, between
  * samples.  Once the N events have occured, a HW counter overflow occurs
  * causing the generation of a HW counter interrupt which also stops the
  * writing of the SPU PC values to the trace buffer.  Hence the last PC
diff --git a/arch/powerpc/platforms/83xx/suspend-asm.S b/arch/powerpc/platforms/83xx/suspend-asm.S
index 1930543..3d1ecd2 100644
--- a/arch/powerpc/platforms/83xx/suspend-asm.S
+++ b/arch/powerpc/platforms/83xx/suspend-asm.S
@@ -231,7 +231,7 @@ _GLOBAL(mpc83xx_enter_deep_sleep)
 	ori	r4, r4, 0x002a
 	mtspr	SPRN_DBAT0L, r4
 	lis	r8, TMP_VIRT_IMMR@h
-	ori	r4, r8, 0x001e	/* 1 MByte accessable from Kernel Space only */
+	ori	r4, r8, 0x001e	/* 1 MByte accessible from Kernel Space only */
 	mtspr	SPRN_DBAT0U, r4
 	isync
 
@@ -241,7 +241,7 @@ _GLOBAL(mpc83xx_enter_deep_sleep)
 	ori	r4, r4, 0x002a
 	mtspr	SPRN_DBAT1L, r4
 	lis	r9, (TMP_VIRT_IMMR + 0x01000000)@h
-	ori	r4, r9, 0x001e	/* 1 MByte accessable from Kernel Space only */
+	ori	r4, r9, 0x001e	/* 1 MByte accessible from Kernel Space only */
 	mtspr	SPRN_DBAT1U, r4
 	isync
 
@@ -253,7 +253,7 @@ _GLOBAL(mpc83xx_enter_deep_sleep)
 	li	r4, 0x0002
 	mtspr	SPRN_DBAT2L, r4
 	lis	r4, KERNELBASE@h
-	ori	r4, r4, 0x001e	/* 1 MByte accessable from Kernel Space only */
+	ori	r4, r4, 0x001e	/* 1 MByte accessible from Kernel Space only */
 	mtspr	SPRN_DBAT2U, r4
 	isync
 
diff --git a/arch/powerpc/platforms/ps3/device-init.c b/arch/powerpc/platforms/ps3/device-init.c
index b341018..6c4b583 100644
--- a/arch/powerpc/platforms/ps3/device-init.c
+++ b/arch/powerpc/platforms/ps3/device-init.c
@@ -566,10 +566,10 @@ static int ps3_setup_dynamic_device(const struct ps3_repository_device *repo)
 	case PS3_DEV_TYPE_STOR_DISK:
 		result = ps3_setup_storage_dev(repo, PS3_MATCH_ID_STOR_DISK);
 
-		/* Some devices are not accessable from the Other OS lpar. */
+		/* Some devices are not accessible from the Other OS lpar. */
 		if (result == -ENODEV) {
 			result = 0;
-			pr_debug("%s:%u: not accessable\n", __func__,
+			pr_debug("%s:%u: not accessible\n", __func__,
 				 __LINE__);
 		}
 
diff --git a/arch/powerpc/platforms/ps3/interrupt.c b/arch/powerpc/platforms/ps3/interrupt.c
index 59d9712..92290ff 100644
--- a/arch/powerpc/platforms/ps3/interrupt.c
+++ b/arch/powerpc/platforms/ps3/interrupt.c
@@ -44,7 +44,7 @@
  * @lock:
  * @ipi_debug_brk_mask:
  *
- * The HV mantains per SMT thread mappings of HV outlet to HV plug on
+ * The HV maintains per SMT thread mappings of HV outlet to HV plug on
  * behalf of the guest.  These mappings are implemented as 256 bit guest
  * supplied bitmaps indexed by plug number.  The addresses of the bitmaps
  * are registered with the HV through lv1_configure_irq_state_bitmap().
diff --git a/arch/sh/mm/cache-sh5.c b/arch/sh/mm/cache-sh5.c
index eb4cc4e..d1bffbc 100644
--- a/arch/sh/mm/cache-sh5.c
+++ b/arch/sh/mm/cache-sh5.c
@@ -568,7 +568,7 @@ static void sh5_flush_dcache_page(void *page)
 }
 
 /*
- * Flush the range [start,end] of kernel virtual adddress space from
+ * Flush the range [start,end] of kernel virtual address space from
  * the I-cache.  The corresponding range must be purged from the
  * D-cache also because the SH-5 doesn't have cache snooping between
  * the caches.  The addresses will be visible through the superpage
diff --git a/arch/sparc/kernel/traps_64.c b/arch/sparc/kernel/traps_64.c
index 42ad2ba..1e97709 100644
--- a/arch/sparc/kernel/traps_64.c
+++ b/arch/sparc/kernel/traps_64.c
@@ -622,7 +622,7 @@ static const char CHAFSR_PERR_msg[] =
 static const char CHAFSR_IERR_msg[] =
 	"Internal processor error";
 static const char CHAFSR_ISAP_msg[] =
-	"System request parity error on incoming addresss";
+	"System request parity error on incoming address";
 static const char CHAFSR_UCU_msg[] =
 	"Uncorrectable E-cache ECC error for ifetch/data";
 static const char CHAFSR_UCC_msg[] =
diff --git a/arch/x86/include/asm/pgalloc.h b/arch/x86/include/asm/pgalloc.h
index 271de94..b4389a4 100644
--- a/arch/x86/include/asm/pgalloc.h
+++ b/arch/x86/include/asm/pgalloc.h
@@ -92,7 +92,7 @@ static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
 extern void ___pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd);
 
 static inline void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd,
-				  unsigned long adddress)
+				  unsigned long address)
 {
 	___pmd_free_tlb(tlb, pmd);
 }
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index cae9c3c..c3e6d9a 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -902,7 +902,7 @@ extern unsigned long thread_saved_pc(struct task_struct *tsk);
 /*
  * The below -8 is to reserve 8 bytes on top of the ring0 stack.
  * This is necessary to guarantee that the entire "struct pt_regs"
- * is accessable even if the CPU haven't stored the SS/ESP registers
+ * is accessible even if the CPU haven't stored the SS/ESP registers
  * on the stack (interrupt gate does not save these registers
  * when switching to the same priv ring).
  * Therefore beware: accessing the ss/esp fields of the
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index d2fdb08..57ca777 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -1086,7 +1086,7 @@ static int alloc_new_range(struct dma_ops_domain *dma_dom,
 
 	dma_dom->aperture_size += APERTURE_RANGE_SIZE;
 
-	/* Intialize the exclusion range if necessary */
+	/* Initialize the exclusion range if necessary */
 	for_each_iommu(iommu) {
 		if (iommu->exclusion_start &&
 		    iommu->exclusion_start >= dma_dom->aperture[index]->offset
@@ -1353,7 +1353,7 @@ static void dma_ops_domain_free(struct dma_ops_domain *dom)
 
 /*
  * Allocates a new protection domain usable for the dma_ops functions.
- * It also intializes the page table and the address allocator data
+ * It also initializes the page table and the address allocator data
  * structures required for the dma_ops interface
  */
 static struct dma_ops_domain *dma_ops_domain_alloc(void)
diff --git a/arch/x86/kernel/early_printk_mrst.c b/arch/x86/kernel/early_printk_mrst.c
index 65df603..25bfdbb 100644
--- a/arch/x86/kernel/early_printk_mrst.c
+++ b/arch/x86/kernel/early_printk_mrst.c
@@ -103,7 +103,7 @@ struct dw_spi_reg {
 static unsigned long mrst_spi_paddr = MRST_REGBASE_SPI0;
 
 static u32 *pclk_spi0;
-/* Always contains an accessable address, start with 0 */
+/* Always contains an accessible address, start with 0 */
 static struct dw_spi_reg *pspi;
 
 static struct kmsg_dumper dw_dumper;
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index bcece91..8e09aa3 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -124,7 +124,7 @@ ENTRY(startup_32)
 	movsl
 	movl pa(boot_params) + NEW_CL_POINTER,%esi
 	andl %esi,%esi
-	jz 1f			# No comand line
+	jz 1f			# No command line
 	movl $pa(boot_command_line),%edi
 	movl $(COMMAND_LINE_SIZE/4),%ecx
 	rep