summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
authorKumar Gala <galak@kernel.crashing.org>2008-01-27 14:06:14 -0600
committerKumar Gala <galak@kernel.crashing.org>2008-01-28 08:33:10 -0600
commitc42f3ad7f1bf17f31c3febdc71034ed6d793d40f (patch)
tree5a56c44717cf8fe4a5f402370506e5fbb78368e4 /arch
parent3155f7f23f7865e64f7eb14e226a2dff8197e51f (diff)
downloadop-kernel-dev-c42f3ad7f1bf17f31c3febdc71034ed6d793d40f.zip
op-kernel-dev-c42f3ad7f1bf17f31c3febdc71034ed6d793d40f.tar.gz
[PPC] Remove 85xx from arch/ppc
85xx exists in arch/powerpc as well as cuImage support to boot from a u-boot that doesn't support device trees. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Diffstat (limited to 'arch')
-rw-r--r--arch/ppc/Kconfig51
-rw-r--r--arch/ppc/Makefile8
-rw-r--r--arch/ppc/configs/TQM8540_defconfig973
-rw-r--r--arch/ppc/configs/TQM8541_defconfig986
-rw-r--r--arch/ppc/configs/TQM8555_defconfig983
-rw-r--r--arch/ppc/configs/TQM8560_defconfig992
-rw-r--r--arch/ppc/configs/mpc8540_ads_defconfig706
-rw-r--r--arch/ppc/configs/mpc8548_cds_defconfig658
-rw-r--r--arch/ppc/configs/mpc8555_cds_defconfig784
-rw-r--r--arch/ppc/configs/mpc8560_ads_defconfig769
-rw-r--r--arch/ppc/configs/stx_gp3_defconfig989
-rw-r--r--arch/ppc/kernel/Makefile1
-rw-r--r--arch/ppc/kernel/asm-offsets.c6
-rw-r--r--arch/ppc/kernel/entry.S12
-rw-r--r--arch/ppc/kernel/head_booke.h55
-rw-r--r--arch/ppc/kernel/head_fsl_booke.S1065
-rw-r--r--arch/ppc/kernel/misc.S46
-rw-r--r--arch/ppc/kernel/ppc_ksyms.c8
-rw-r--r--arch/ppc/kernel/setup.c3
-rw-r--r--arch/ppc/kernel/traps.c121
-rw-r--r--arch/ppc/mm/Makefile1
-rw-r--r--arch/ppc/mm/fsl_booke_mmu.c236
-rw-r--r--arch/ppc/mm/init.c6
-rw-r--r--arch/ppc/mm/mmu_decl.h6
-rw-r--r--arch/ppc/mm/pgtable.c28
-rw-r--r--arch/ppc/platforms/85xx/Kconfig106
-rw-r--r--arch/ppc/platforms/85xx/Makefile13
-rw-r--r--arch/ppc/platforms/85xx/mpc8540_ads.c226
-rw-r--r--arch/ppc/platforms/85xx/mpc8540_ads.h22
-rw-r--r--arch/ppc/platforms/85xx/mpc8555_cds.h23
-rw-r--r--arch/ppc/platforms/85xx/mpc8560_ads.c303
-rw-r--r--arch/ppc/platforms/85xx/mpc8560_ads.h24
-rw-r--r--arch/ppc/platforms/85xx/mpc85xx_ads_common.c197
-rw-r--r--arch/ppc/platforms/85xx/mpc85xx_ads_common.h67
-rw-r--r--arch/ppc/platforms/85xx/mpc85xx_cds_common.c601
-rw-r--r--arch/ppc/platforms/85xx/mpc85xx_cds_common.h80
-rw-r--r--arch/ppc/platforms/85xx/sbc8560.c234
-rw-r--r--arch/ppc/platforms/85xx/sbc8560.h47
-rw-r--r--arch/ppc/platforms/85xx/sbc85xx.c166
-rw-r--r--arch/ppc/platforms/85xx/sbc85xx.h70
-rw-r--r--arch/ppc/platforms/85xx/stx_gp3.c339
-rw-r--r--arch/ppc/platforms/85xx/stx_gp3.h69
-rw-r--r--arch/ppc/platforms/85xx/tqm85xx.c412
-rw-r--r--arch/ppc/platforms/85xx/tqm85xx.h53
-rw-r--r--arch/ppc/syslib/Makefile8
-rw-r--r--arch/ppc/syslib/mpc85xx_devices.c826
-rw-r--r--arch/ppc/syslib/mpc85xx_sys.c233
-rw-r--r--arch/ppc/syslib/ocp.c2
-rw-r--r--arch/ppc/syslib/open_pic.c2
-rw-r--r--arch/ppc/syslib/ppc85xx_common.c38
-rw-r--r--arch/ppc/syslib/ppc85xx_common.h22
-rw-r--r--arch/ppc/syslib/ppc85xx_setup.c367
-rw-r--r--arch/ppc/syslib/ppc85xx_setup.h56
53 files changed, 16 insertions, 14083 deletions
diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
index 08e083d..db5934c 100644
--- a/arch/ppc/Kconfig
+++ b/arch/ppc/Kconfig
@@ -104,12 +104,6 @@ config 8xx
bool "8xx"
select PPC_LIB_RHEAP
-config E200
- bool "e200"
-
-config E500
- bool "e500"
-
endchoice
config PPC_FPU
@@ -124,25 +118,14 @@ config PPC_DCR
depends on PPC_DCR_NATIVE
default y
-config BOOKE
- bool
- depends on E200 || E500
- default y
-
-config FSL_BOOKE
- bool
- depends on E200 || E500
- default y
-
config PTE_64BIT
bool
- depends on 44x || E500
+ depends on 44x
default y if 44x
- default y if E500 && PHYS_64BIT
config PHYS_64BIT
- bool 'Large physical address support' if E500
- depends on 44x || E500
+ bool
+ depends on 44x
default y if 44x
---help---
This option enables kernel support for larger than 32-bit physical
@@ -167,21 +150,6 @@ config ALTIVEC
If in doubt, say Y here.
-config SPE
- bool "SPE Support"
- depends on E200 || E500
- ---help---
- This option enables kernel support for the Signal Processing
- Extensions (SPE) to the PowerPC processor. The kernel currently
- supports saving and restoring SPE registers, and turning on the
- 'spe enable' bit so user processes can execute SPE instructions.
-
- This option is only useful if you have a processor that supports
- SPE (e500, otherwise known as 85xx series), but does not have any
- effect on a non-spe cpu (it does, however add code to the kernel).
-
- If in doubt, say Y here.
-
config TAU
bool "Thermal Management Support"
depends on 6xx && !8260
@@ -228,7 +196,7 @@ config TAU_AVERAGE
config MATH_EMULATION
bool "Math emulation"
- depends on 4xx || 8xx || E200 || E500
+ depends on 4xx || 8xx
---help---
Some PowerPC chips designed for embedded applications do not have
a floating-point unit and therefore do not implement the
@@ -279,7 +247,6 @@ config PPC601_SYNC_FIX
If in doubt, say Y here.
source arch/ppc/platforms/4xx/Kconfig
-source arch/ppc/platforms/85xx/Kconfig
config PPC_STD_MMU
bool
@@ -288,7 +255,7 @@ config PPC_STD_MMU
config NOT_COHERENT_CACHE
bool
- depends on 4xx || 8xx || E200
+ depends on 4xx || 8xx
default y
endmenu
@@ -1045,13 +1012,13 @@ config GENERIC_ISA_DMA
config PPC_I8259
bool
- default y if 85xx || PPC_PREP
+ default y if PPC_PREP
default n
config PPC_INDIRECT_PCI
bool
depends on PCI
- default y if 40x || 44x || 85xx || PPC_PREP
+ default y if 40x || 44x || PPC_PREP
default n
config EISA
@@ -1068,8 +1035,8 @@ config MCA
bool
config PCI
- bool "PCI support" if 40x || CPM2 || 85xx || PPC_MPC52xx
- default y if !40x && !CPM2 && !8xx && !85xx
+ bool "PCI support" if 40x || CPM2 || PPC_MPC52xx
+ default y if !40x && !CPM2 && !8xx
default PCI_QSPAN if !4xx && !CPM2 && 8xx
help
Find out whether your system includes a PCI bus. PCI is the name of
diff --git a/arch/ppc/Makefile b/arch/ppc/Makefile
index a4fef18..8df7f0e 100644
--- a/arch/ppc/Makefile
+++ b/arch/ppc/Makefile
@@ -36,14 +36,8 @@ LINUXINCLUDE += -Iarch/$(ARCH)/include
CHECKFLAGS += -D__powerpc__
-ifndef CONFIG_FSL_BOOKE
-KBUILD_CFLAGS += -mstring
-endif
-
cpu-as-$(CONFIG_4xx) += -Wa,-m405
cpu-as-$(CONFIG_6xx) += -Wa,-maltivec
-cpu-as-$(CONFIG_E500) += -Wa,-me500
-cpu-as-$(CONFIG_E200) += -Wa,-me200
KBUILD_AFLAGS += $(cpu-as-y)
KBUILD_CFLAGS += $(cpu-as-y)
@@ -55,7 +49,6 @@ head-y := arch/ppc/kernel/head.o
head-$(CONFIG_8xx) := arch/ppc/kernel/head_8xx.o
head-$(CONFIG_4xx) := arch/ppc/kernel/head_4xx.o
head-$(CONFIG_44x) := arch/ppc/kernel/head_44x.o
-head-$(CONFIG_FSL_BOOKE) := arch/ppc/kernel/head_fsl_booke.o
head-$(CONFIG_PPC_FPU) += arch/powerpc/kernel/fpu.o
@@ -65,7 +58,6 @@ core-y += arch/ppc/kernel/ arch/powerpc/kernel/ \
arch/ppc/syslib/ arch/powerpc/sysdev/ \
arch/powerpc/lib/
core-$(CONFIG_4xx) += arch/ppc/platforms/4xx/
-core-$(CONFIG_85xx) += arch/ppc/platforms/85xx/
core-$(CONFIG_MATH_EMULATION) += arch/powerpc/math-emu/
core-$(CONFIG_XMON) += arch/ppc/xmon/
drivers-$(CONFIG_8xx) += arch/ppc/8xx_io/
diff --git a/arch/ppc/configs/TQM8540_defconfig b/arch/ppc/configs/TQM8540_defconfig
deleted file mode 100644
index f33f0e7..0000000
--- a/arch/ppc/configs/TQM8540_defconfig
+++ /dev/null
@@ -1,973 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Fri Nov 25 17:26:50 2005
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E200 is not set
-CONFIG_E500=y
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_SPE=y
-CONFIG_MATH_EMULATION=y
-# CONFIG_KEXEC is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_WANT_EARLY_SERIAL is not set
-CONFIG_PPC_GEN550=y
-CONFIG_85xx=y
-CONFIG_PPC_INDIRECT_PCI_BE=y
-
-#
-# Freescale 85xx options
-#
-# CONFIG_MPC8540_ADS is not set
-# CONFIG_MPC8548_CDS is not set
-# CONFIG_MPC8555_CDS is not set
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_SBC8560 is not set
-# CONFIG_STX_GP3 is not set
-CONFIG_TQM8540=y
-# CONFIG_TQM8541 is not set
-# CONFIG_TQM8555 is not set
-# CONFIG_TQM8560 is not set
-CONFIG_MPC8540=y
-
-#
-# Platform options
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_CMDLINE_BOOL is not set
-# CONFIG_PM is not set
-# CONFIG_HIBERNATION is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_PPC_I8259=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-# CONFIG_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_AMDSTD_RETRY=0
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_TQM85xx=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-CONFIG_BLK_DEV_VIA82CXXX=y
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-# CONFIG_WINDFARM is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-CONFIG_SENSORS_DS1337=y
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_M41T00 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-CONFIG_SENSORS_LM75=y
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-CONFIG_HWMON_DEBUG_CHIP=y
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# SN Devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/ppc/configs/TQM8541_defconfig b/arch/ppc/configs/TQM8541_defconfig
deleted file mode 100644
index e00cd62..0000000
--- a/arch/ppc/configs/TQM8541_defconfig
+++ /dev/null
@@ -1,986 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Wed Nov 30 13:36:28 2005
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E200 is not set
-CONFIG_E500=y
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_SPE=y
-CONFIG_MATH_EMULATION=y
-# CONFIG_KEXEC is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_WANT_EARLY_SERIAL is not set
-CONFIG_PPC_GEN550=y
-CONFIG_85xx=y
-CONFIG_PPC_INDIRECT_PCI_BE=y
-
-#
-# Freescale 85xx options
-#
-# CONFIG_MPC8540_ADS is not set
-# CONFIG_MPC8548_CDS is not set
-# CONFIG_MPC8555_CDS is not set
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_SBC8560 is not set
-# CONFIG_STX_GP3 is not set
-# CONFIG_TQM8540 is not set
-CONFIG_TQM8541=y
-# CONFIG_TQM8555 is not set
-# CONFIG_TQM8560 is not set
-CONFIG_MPC8555=y
-
-#
-# Platform options
-#
-CONFIG_CPM2=y
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_HIGHMEM is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_CMDLINE_BOOL is not set
-# CONFIG_PM is not set
-# CONFIG_HIBERNATION is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_PPC_I8259=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_AMDSTD_RETRY=0
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_TQM85xx=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-CONFIG_BLK_DEV_VIA82CXXX=y
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-# CONFIG_WINDFARM is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_FS_ENET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_CPM is not set
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
-# CONFIG_I2C_MPC8260 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-CONFIG_SENSORS_DS1337=y
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_MAX6900 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8563 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_M41T00 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-CONFIG_SENSORS_LM75=y
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-CONFIG_HWMON_DEBUG_CHIP=y
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# SN Devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-# CONFIG_SCC_ENET is not set
-# CONFIG_FEC_ENET is not set
-
-#
-# CPM2 Options
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_KGDB_CONSOLE is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/ppc/configs/TQM8555_defconfig b/arch/ppc/configs/TQM8555_defconfig
deleted file mode 100644
index 43a0d9d..0000000
--- a/arch/ppc/configs/TQM8555_defconfig
+++ /dev/null
@@ -1,983 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Thu Nov 24 17:10:52 2005
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E200 is not set
-CONFIG_E500=y
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_SPE=y
-CONFIG_MATH_EMULATION=y
-# CONFIG_KEXEC is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_WANT_EARLY_SERIAL is not set
-CONFIG_PPC_GEN550=y
-CONFIG_85xx=y
-CONFIG_PPC_INDIRECT_PCI_BE=y
-
-#
-# Freescale 85xx options
-#
-# CONFIG_MPC8540_ADS is not set
-# CONFIG_MPC8548_CDS is not set
-# CONFIG_MPC8555_CDS is not set
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_SBC8560 is not set
-# CONFIG_STX_GP3 is not set
-# CONFIG_TQM8540 is not set
-# CONFIG_TQM8541 is not set
-CONFIG_TQM8555=y
-# CONFIG_TQM8560 is not set
-CONFIG_MPC8555=y
-
-#
-# Platform options
-#
-CONFIG_CPM2=y
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_HIGHMEM is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_CMDLINE_BOOL is not set
-# CONFIG_PM is not set
-# CONFIG_HIBERNATION is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_PPC_I8259=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_AMDSTD_RETRY=0
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_TQM85xx=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-CONFIG_BLK_DEV_VIA82CXXX=y
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-# CONFIG_WINDFARM is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_FS_ENET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_CPM is not set
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-CONFIG_SENSORS_DS1337=y
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_M41T00 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-CONFIG_SENSORS_LM75=y
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-CONFIG_HWMON_DEBUG_CHIP=y
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# SN Devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-# CONFIG_SCC_ENET is not set
-# CONFIG_FEC_ENET is not set
-
-#
-# CPM2 Options
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_KGDB_CONSOLE is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/ppc/configs/TQM8560_defconfig b/arch/ppc/configs/TQM8560_defconfig
deleted file mode 100644
index a814d17..0000000
--- a/arch/ppc/configs/TQM8560_defconfig
+++ /dev/null
@@ -1,992 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc2
-# Wed Nov 30 16:47:53 2005
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E200 is not set
-CONFIG_E500=y
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_SPE=y
-CONFIG_MATH_EMULATION=y
-# CONFIG_KEXEC is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_WANT_EARLY_SERIAL is not set
-CONFIG_85xx=y
-CONFIG_PPC_INDIRECT_PCI_BE=y
-
-#
-# Freescale 85xx options
-#
-# CONFIG_MPC8540_ADS is not set
-# CONFIG_MPC8548_CDS is not set
-# CONFIG_MPC8555_CDS is not set
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_SBC8560 is not set
-# CONFIG_STX_GP3 is not set
-# CONFIG_TQM8540 is not set
-# CONFIG_TQM8541 is not set
-# CONFIG_TQM8555 is not set
-CONFIG_TQM8560=y
-CONFIG_MPC8560=y
-
-#
-# Platform options
-#
-CONFIG_CPM2=y
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_HIGHMEM is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_CMDLINE_BOOL is not set
-# CONFIG_PM is not set
-# CONFIG_HIBERNATION is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_PPC_I8259=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-# CONFIG_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_AMDSTD_RETRY=0
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_TQM85xx=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-CONFIG_BLK_DEV_VIA82CXXX=y
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-# CONFIG_WINDFARM is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_FS_ENET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_CPM=y
-CONFIG_SERIAL_CPM_CONSOLE=y
-CONFIG_SERIAL_CPM_SCC1=y
-# CONFIG_SERIAL_CPM_SCC2 is not set
-# CONFIG_SERIAL_CPM_SCC3 is not set
-# CONFIG_SERIAL_CPM_SCC4 is not set
-# CONFIG_SERIAL_CPM_SMC1 is not set
-# CONFIG_SERIAL_CPM_SMC2 is not set
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
-# CONFIG_I2C_MPC8260 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-CONFIG_SENSORS_DS1337=y
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_MAX6900 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8563 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_M41T00 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-CONFIG_SENSORS_LM75=y
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-CONFIG_HWMON_DEBUG_CHIP=y
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# SN Devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-# CONFIG_SCC_ENET is not set
-# CONFIG_FEC_ENET is not set
-
-#
-# CPM2 Options
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_KGDB_CONSOLE is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/ppc/configs/mpc8540_ads_defconfig b/arch/ppc/configs/mpc8540_ads_defconfig
deleted file mode 100644
index bf676eb..0000000
--- a/arch/ppc/configs/mpc8540_ads_defconfig
+++ /dev/null
@@ -1,706 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc1
-# Thu Jan 20 01:23:13 2005
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-CONFIG_E500=y
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-CONFIG_SPE=y
-CONFIG_MATH_EMULATION=y
-# CONFIG_CPU_FREQ is not set
-CONFIG_PPC_GEN550=y
-CONFIG_85xx=y
-CONFIG_PPC_INDIRECT_PCI_BE=y
-
-#
-# Freescale 85xx options
-#
-CONFIG_MPC8540_ADS=y
-# CONFIG_MPC8555_CDS is not set
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_SBC8560 is not set
-CONFIG_MPC8540=y
-
-#
-# Platform options
-#
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Bus options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-CONFIG_PCI_NAMES=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PC-card bridges
-#
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-CONFIG_I2C_MPC=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-
-#
-# Other I2C Chip support
-#
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/ppc/configs/mpc8548_cds_defconfig b/arch/ppc/configs/mpc8548_cds_defconfig
deleted file mode 100644
index f36fc5db..0000000
--- a/arch/ppc/configs/mpc8548_cds_defconfig
+++ /dev/null
@@ -1,658 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc4
-# Tue May 24 22:36:27 2005
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-CONFIG_E500=y
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_SPE=y
-CONFIG_MATH_EMULATION=y
-# CONFIG_CPU_FREQ is not set
-# CONFIG_PM is not set
-CONFIG_85xx=y
-CONFIG_PPC_INDIRECT_PCI_BE=y
-
-#
-# Freescale 85xx options
-#
-# CONFIG_MPC8540_ADS is not set
-CONFIG_MPC8548_CDS=y
-# CONFIG_MPC8555_CDS is not set
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_SBC8560 is not set
-# CONFIG_STX_GP3 is not set
-CONFIG_MPC8548=y
-
-#
-# Platform options
-#
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-
-#
-# Ethernet (1000 Mbit)
-#
-CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-CONFIG_I2C_MPC=y
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-
-#
-# Other I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_M41T00 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/ppc/configs/mpc8555_cds_defconfig b/arch/ppc/configs/mpc8555_cds_defconfig
deleted file mode 100644
index 4f1e320..0000000
--- a/arch/ppc/configs/mpc8555_cds_defconfig
+++ /dev/null
@@ -1,784 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc4
-# Tue May 17 11:56:01 2005
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-CONFIG_E500=y
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_SPE=y
-CONFIG_MATH_EMULATION=y
-# CONFIG_CPU_FREQ is not set
-CONFIG_PPC_GEN550=y
-# CONFIG_PM is not set
-CONFIG_85xx=y
-CONFIG_PPC_INDIRECT_PCI_BE=y
-
-#
-# Freescale 85xx options
-#
-# CONFIG_MPC8540_ADS is not set
-CONFIG_MPC8555_CDS=y
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_SBC8560 is not set
-# CONFIG_STX_GP3 is not set
-CONFIG_MPC8555=y
-CONFIG_85xx_PCI2=y
-
-#
-# Platform options
-#
-CONFIG_CPM2=y
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-CONFIG_PCI_NAMES=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-CONFIG_BLK_DEV_VIA82CXXX=y
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_CPM is not set
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-
-#
-# Other I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_M41T00 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-# CONFIG_SCC_ENET is not set
-# CONFIG_FEC_ENET is not set
-
-#
-# CPM2 Options
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_KGDB_CONSOLE is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/ppc/configs/mpc8560_ads_defconfig b/arch/ppc/configs/mpc8560_ads_defconfig
deleted file mode 100644
index f12d48f..0000000
--- a/arch/ppc/configs/mpc8560_ads_defconfig
+++ /dev/null
@@ -1,769 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc6
-# Thu Aug 11 18:14:45 2005
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E200 is not set
-CONFIG_E500=y
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_SPE=y
-CONFIG_MATH_EMULATION=y
-# CONFIG_KEXEC is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_PM is not set
-CONFIG_85xx=y
-CONFIG_PPC_INDIRECT_PCI_BE=y
-
-#
-# Freescale 85xx options
-#
-# CONFIG_MPC8540_ADS is not set
-# CONFIG_MPC8548_CDS is not set
-# CONFIG_MPC8555_CDS is not set
-CONFIG_MPC8560_ADS=y
-# CONFIG_SBC8560 is not set
-# CONFIG_STX_GP3 is not set
-CONFIG_MPC8560=y
-
-#
-# Platform options
-#
-CONFIG_CPM2=y
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_SMP is not set
-# CONFIG_HIGHMEM is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-CONFIG_PCI_NAMES=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_CPM=y
-CONFIG_SERIAL_CPM_CONSOLE=y
-CONFIG_SERIAL_CPM_SCC1=y
-CONFIG_SERIAL_CPM_SCC2=y
-# CONFIG_SERIAL_CPM_SCC3 is not set
-# CONFIG_SERIAL_CPM_SCC4 is not set
-# CONFIG_SERIAL_CPM_SMC1 is not set
-# CONFIG_SERIAL_CPM_SMC2 is not set
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_SENSOR is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_M41T00 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# SN Devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-# CONFIG_SCC_ENET is not set
-# CONFIG_FEC_ENET is not set
-
-#
-# CPM2 Options
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_KGDB_CONSOLE is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/ppc/configs/stx_gp3_defconfig b/arch/ppc/configs/stx_gp3_defconfig
deleted file mode 100644
index 70d6f84..0000000
--- a/arch/ppc/configs/stx_gp3_defconfig
+++ /dev/null
@@ -1,989 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc4
-# Tue May 24 18:11:04 2005
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-CONFIG_E500=y
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-# CONFIG_PHYS_64BIT is not set
-# CONFIG_SPE is not set
-CONFIG_MATH_EMULATION=y
-# CONFIG_CPU_FREQ is not set
-# CONFIG_PM is not set
-CONFIG_85xx=y
-CONFIG_PPC_INDIRECT_PCI_BE=y
-
-#
-# Freescale 85xx options
-#
-# CONFIG_MPC8540_ADS is not set
-# CONFIG_MPC8555_CDS is not set
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_SBC8560 is not set
-CONFIG_STX_GP3=y
-CONFIG_MPC8560=y
-
-#
-# Platform options
-#
-CONFIG_CPM2=y
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HIGHMEM=y
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=m
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
-# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-CONFIG_RAPIDIO=y
-CONFIG_RAPIDIO_8_BIT_TRANSPORT=y
-CONFIG_RAPIDIO_DISC_TIMEOUT=30
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-CONFIG_PARPORT=m
-CONFIG_PARPORT_PC=m
-# CONFIG_PARPORT_PC_FIFO is not set
-# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_1284 is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=m
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_IDEPCI is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=m
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=m
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=m
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_TFTP is not set
-# CONFIG_IP_NF_AMANDA is not set
-# CONFIG_IP_NF_QUEUE is not set
-CONFIG_IP_NF_IPTABLES=m
-# CONFIG_IP_NF_MATCH_LIMIT is not set
-# CONFIG_IP_NF_MATCH_IPRANGE is not set
-# CONFIG_IP_NF_MATCH_MAC is not set
-# CONFIG_IP_NF_MATCH_PKTTYPE is not set
-# CONFIG_IP_NF_MATCH_MARK is not set
-# CONFIG_IP_NF_MATCH_MULTIPORT is not set
-# CONFIG_IP_NF_MATCH_TOS is not set
-# CONFIG_IP_NF_MATCH_RECENT is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_DSCP is not set
-# CONFIG_IP_NF_MATCH_AH_ESP is not set
-# CONFIG_IP_NF_MATCH_LENGTH is not set
-# CONFIG_IP_NF_MATCH_TTL is not set
-# CONFIG_IP_NF_MATCH_TCPMSS is not set
-# CONFIG_IP_NF_MATCH_HELPER is not set
-# CONFIG_IP_NF_MATCH_STATE is not set
-# CONFIG_IP_NF_MATCH_CONNTRACK is not set
-# CONFIG_IP_NF_MATCH_OWNER is not set
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_REALM is not set
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
-CONFIG_IP_NF_FILTER=m
-# CONFIG_IP_NF_TARGET_REJECT is not set
-# CONFIG_IP_NF_TARGET_LOG is not set
-# CONFIG_IP_NF_TARGET_ULOG is not set
-# CONFIG_IP_NF_TARGET_TCPMSS is not set
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-# CONFIG_IP_NF_TARGET_NETMAP is not set
-# CONFIG_IP_NF_TARGET_SAME is not set
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-# CONFIG_IP_NF_MANGLE is not set
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-CONFIG_NET_PKTGEN=y
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-CONFIG_RIONET=y
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1280
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1024
-CONFIG_INPUT_JOYDEV=m
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_CPM=y
-CONFIG_SERIAL_CPM_CONSOLE=y
-# CONFIG_SERIAL_CPM_SCC1 is not set
-CONFIG_SERIAL_CPM_SCC2=y
-# CONFIG_SERIAL_CPM_SCC3 is not set
-# CONFIG_SERIAL_CPM_SCC4 is not set
-# CONFIG_SERIAL_CPM_SMC1 is not set
-# CONFIG_SERIAL_CPM_SMC2 is not set
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
-# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-CONFIG_AGP=m
-CONFIG_DRM=m
-# CONFIG_DRM_TDFX is not set
-# CONFIG_DRM_R128 is not set
-# CONFIG_DRM_RADEON is not set
-# CONFIG_DRM_MGA is not set
-# CONFIG_DRM_SIS is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=m
-CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=m
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_MPC is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-
-#
-# Other I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_M41T00 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-CONFIG_JBD_DEBUG=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-# CONFIG_DEVFS_MOUNT is not set
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_SCC_ENET is not set
-# CONFIG_FEC_ENET is not set
-
-#
-# CPM2 Options
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=y
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_KGDB_CONSOLE is not set
-# CONFIG_XMON is not set
-CONFIG_BDI_SWITCH=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile
index 5da0ca7..7b73905 100644
--- a/arch/ppc/kernel/Makefile
+++ b/arch/ppc/kernel/Makefile
@@ -4,7 +4,6 @@
extra-$(CONFIG_PPC_STD_MMU) := head.o
extra-$(CONFIG_40x) := head_4xx.o
extra-$(CONFIG_44x) := head_44x.o
-extra-$(CONFIG_FSL_BOOKE) := head_fsl_booke.o
extra-$(CONFIG_8xx) := head_8xx.o
extra-y += vmlinux.lds
diff --git a/arch/ppc/kernel/asm-offsets.c b/arch/ppc/kernel/asm-offsets.c
index e8e9432..a51a177 100644
--- a/arch/ppc/kernel/asm-offsets.c
+++ b/arch/ppc/kernel/asm-offsets.c
@@ -54,12 +54,6 @@ main(void)
DEFINE(THREAD_VSCR, offsetof(struct thread_struct, vscr));
DEFINE(THREAD_USED_VR, offsetof(struct thread_struct, used_vr));
#endif /* CONFIG_ALTIVEC */
-#ifdef CONFIG_SPE
- DEFINE(THREAD_EVR0, offsetof(struct thread_struct, evr[0]));
- DEFINE(THREAD_ACC, offsetof(struct thread_struct, acc));
- DEFINE(THREAD_SPEFSCR, offsetof(struct thread_struct, spefscr));
- DEFINE(THREAD_USED_SPE, offsetof(struct thread_struct, used_spe));
-#endif /* CONFIG_SPE */
/* Interrupt register frame */
DEFINE(STACK_FRAME_OVERHEAD, STACK_FRAME_OVERHEAD);
DEFINE(INT_FRAME_SIZE, STACK_FRAME_OVERHEAD + sizeof(struct pt_regs));
diff --git a/arch/ppc/kernel/entry.S b/arch/ppc/kernel/entry.S
index 59e77eb..5f3a5d0 100644
--- a/arch/ppc/kernel/entry.S
+++ b/arch/ppc/kernel/entry.S
@@ -519,12 +519,7 @@ BEGIN_FTR_SECTION
stw r12,THREAD+THREAD_VRSAVE(r2)
END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
#endif /* CONFIG_ALTIVEC */
-#ifdef CONFIG_SPE
- oris r0,r0,MSR_SPE@h /* Disable SPE */
- mfspr r12,SPRN_SPEFSCR /* save spefscr register value */
- stw r12,THREAD+THREAD_SPEFSCR(r2)
-#endif /* CONFIG_SPE */
- and. r0,r0,r11 /* FP or altivec or SPE enabled? */
+ and. r0,r0,r11 /* FP or altivec enabled? */
beq+ 1f
andc r11,r11,r0
MTMSRD(r11)
@@ -557,11 +552,6 @@ BEGIN_FTR_SECTION
mtspr SPRN_VRSAVE,r0 /* if G4, restore VRSAVE reg */
END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
#endif /* CONFIG_ALTIVEC */
-#ifdef CONFIG_SPE
- lwz r0,THREAD+THREAD_SPEFSCR(r2)
- mtspr SPRN_SPEFSCR,r0 /* restore SPEFSCR reg */
-#endif /* CONFIG_SPE */
-
lwz r0,_CCR(r1)
mtcrf 0xFF,r0
/* r3-r12 are destroyed -- Cort */
diff --git a/arch/ppc/kernel/head_booke.h b/arch/ppc/kernel/head_booke.h
index f3d274c..166d597 100644
--- a/arch/ppc/kernel/head_booke.h
+++ b/arch/ppc/kernel/head_booke.h
@@ -212,60 +212,6 @@ label:
* save (and later restore) the MSR via SPRN_CSRR1, which will still have
* the MSR_DE bit set.
*/
-#ifdef CONFIG_E200
-#define DEBUG_EXCEPTION \
- START_EXCEPTION(Debug); \
- DEBUG_EXCEPTION_PROLOG; \
- \
- /* \
- * If there is a single step or branch-taken exception in an \
- * exception entry sequence, it was probably meant to apply to \
- * the code where the exception occurred (since exception entry \
- * doesn't turn off DE automatically). We simulate the effect \
- * of turning off DE on entry to an exception handler by turning \
- * off DE in the CSRR1 value and clearing the debug status. \
- */ \
- mfspr r10,SPRN_DBSR; /* check single-step/branch taken */ \
- andis. r10,r10,DBSR_IC@h; \
- beq+ 2f; \
- \
- lis r10,KERNELBASE@h; /* check if exception in vectors */ \
- ori r10,r10,KERNELBASE@l; \
- cmplw r12,r10; \
- blt+ 2f; /* addr below exception vectors */ \
- \
- lis r10,Debug@h; \
- ori r10,r10,Debug@l; \
- cmplw r12,r10; \
- bgt+ 2f; /* addr above exception vectors */ \
- \
- /* here it looks like we got an inappropriate debug exception. */ \
-1: rlwinm r9,r9,0,~MSR_DE; /* clear DE in the CDRR1 value */ \
- lis r10,DBSR_IC@h; /* clear the IC event */ \
- mtspr SPRN_DBSR,r10; \
- /* restore state and get out */ \
- lwz r10,_CCR(r11); \
- lwz r0,GPR0(r11); \
- lwz r1,GPR1(r11); \
- mtcrf 0x80,r10; \
- mtspr SPRN_DSRR0,r12; \
- mtspr SPRN_DSRR1,r9; \
- lwz r9,GPR9(r11); \
- lwz r12,GPR12(r11); \
- mtspr DEBUG_SPRG,r8; \
- BOOKE_LOAD_EXC_LEVEL_STACK(DEBUG); /* r8 points to the debug stack */ \
- lwz r10,GPR10-INT_FRAME_SIZE(r8); \
- lwz r11,GPR11-INT_FRAME_SIZE(r8); \
- mfspr r8,DEBUG_SPRG; \
- \
- RFDI; \
- b .; \
- \
- /* continue normal handling for a critical exception... */ \
-2: mfspr r4,SPRN_DBSR; \
- addi r3,r1,STACK_FRAME_OVERHEAD; \
- EXC_XFER_TEMPLATE(DebugException, 0x2002, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), NOCOPY, debug_transfer_to_handler, ret_from_debug_exc)
-#else
#define DEBUG_EXCEPTION \
START_EXCEPTION(Debug); \
CRITICAL_EXCEPTION_PROLOG; \
@@ -318,7 +264,6 @@ label:
2: mfspr r4,SPRN_DBSR; \
addi r3,r1,STACK_FRAME_OVERHEAD; \
EXC_XFER_TEMPLATE(DebugException, 0x2002, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), NOCOPY, crit_transfer_to_handler, ret_from_crit_exc)
-#endif
#define INSTRUCTION_STORAGE_EXCEPTION \
START_EXCEPTION(InstructionStorage) \
diff --git a/arch/ppc/kernel/head_fsl_booke.S b/arch/ppc/kernel/head_fsl_booke.S
deleted file mode 100644
index 1f155d3..0000000
--- a/arch/ppc/kernel/head_fsl_booke.S
+++ /dev/null
@@ -1,1065 +0,0 @@
-/*
- * Kernel execution entry point code.
- *
- * Copyright (c) 1995-1996 Gary Thomas <gdt@linuxppc.org>
- * Initial PowerPC version.
- * Copyright (c) 1996 Cort Dougan <cort@cs.nmt.edu>
- * Rewritten for PReP
- * Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
- * Low-level exception handers, MMU support, and rewrite.
- * Copyright (c) 1997 Dan Malek <dmalek@jlc.net>
- * PowerPC 8xx modifications.
- * Copyright (c) 1998-1999 TiVo, Inc.
- * PowerPC 403GCX modifications.
- * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
- * PowerPC 403GCX/405GP modifications.
- * Copyright 2000 MontaVista Software Inc.
- * PPC405 modifications
- * PowerPC 403GCX/405GP modifications.
- * Author: MontaVista Software, Inc.
- * frank_rowand@mvista.com or source@mvista.com
- * debbie_chu@mvista.com
- * Copyright 2002-2004 MontaVista Software, Inc.
- * PowerPC 44x support, Matt Porter <mporter@kernel.crashing.org>
- * Copyright 2004 Freescale Semiconductor, Inc
- * PowerPC e500 modifications, Kumar Gala <galak@kernel.crashing.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/threads.h>
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/mmu.h>
-#include <asm/pgtable.h>
-#include <asm/cputable.h>
-#include <asm/thread_info.h>
-#include <asm/ppc_asm.h>
-#include <asm/asm-offsets.h>
-#include "head_booke.h"
-
-/* As with the other PowerPC ports, it is expected that when code
- * execution begins here, the following registers contain valid, yet
- * optional, information:
- *
- * r3 - Board info structure pointer (DRAM, frequency, MAC address, etc.)
- * r4 - Starting address of the init RAM disk
- * r5 - Ending address of the init RAM disk
- * r6 - Start of kernel command line string (e.g. "mem=128")
- * r7 - End of kernel command line string
- *
- */
- .text
-_GLOBAL(_stext)
-_GLOBAL(_start)
- /*
- * Reserve a word at a fixed location to store the address
- * of abatron_pteptrs
- */
- nop
-/*
- * Save parameters we are passed
- */
- mr r31,r3
- mr r30,r4
- mr r29,r5
- mr r28,r6
- mr r27,r7
- li r24,0 /* CPU number */
-
-/* We try to not make any assumptions about how the boot loader
- * setup or used the TLBs. We invalidate all mappings from the
- * boot loader and load a single entry in TLB1[0] to map the
- * first 16M of kernel memory. Any boot info passed from the
- * bootloader needs to live in this first 16M.
- *
- * Requirement on bootloader:
- * - The page we're executing in needs to reside in TLB1 and
- * have IPROT=1. If not an invalidate broadcast could
- * evict the entry we're currently executing in.
- *
- * r3 = Index of TLB1 were executing in
- * r4 = Current MSR[IS]
- * r5 = Index of TLB1 temp mapping
- *
- * Later in mapin_ram we will correctly map lowmem, and resize TLB1[0]
- * if needed
- */
-
-/* 1. Find the index of the entry we're executing in */
- bl invstr /* Find our address */
-invstr: mflr r6 /* Make it accessible */
- mfmsr r7
- rlwinm r4,r7,27,31,31 /* extract MSR[IS] */
- mfspr r7, SPRN_PID0
- slwi r7,r7,16
- or r7,r7,r4
- mtspr SPRN_MAS6,r7
- tlbsx 0,r6 /* search MSR[IS], SPID=PID0 */
-#ifndef CONFIG_E200
- mfspr r7,SPRN_MAS1
- andis. r7,r7,MAS1_VALID@h
- bne match_TLB
- mfspr r7,SPRN_PID1
- slwi r7,r7,16
- or r7,r7,r4
- mtspr SPRN_MAS6,r7
- tlbsx 0,r6 /* search MSR[IS], SPID=PID1 */
- mfspr r7,SPRN_MAS1
- andis. r7,r7,MAS1_VALID@h
- bne match_TLB
- mfspr r7, SPRN_PID2
- slwi r7,r7,16
- or r7,r7,r4
- mtspr SPRN_MAS6,r7
- tlbsx 0,r6 /* Fall through, we had to match */
-#endif
-match_TLB:
- mfspr r7,SPRN_MAS0
- rlwinm r3,r7,16,20,31 /* Extract MAS0(Entry) */
-
- mfspr r7,SPRN_MAS1 /* Insure IPROT set */
- oris r7,r7,MAS1_IPROT@h
- mtspr SPRN_MAS1,r7
- tlbwe
-
-/* 2. Invalidate all entries except the entry we're executing in */
- mfspr r9,SPRN_TLB1CFG
- andi. r9,r9,0xfff
- li r6,0 /* Set Entry counter to 0 */
-1: lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */
- rlwimi r7,r6,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r6) */
- mtspr SPRN_MAS0,r7
- tlbre
- mfspr r7,SPRN_MAS1
- rlwinm r7,r7,0,2,31 /* Clear MAS1 Valid and IPROT */
- cmpw r3,r6
- beq skpinv /* Dont update the current execution TLB */
- mtspr SPRN_MAS1,r7
- tlbwe
- isync
-skpinv: addi r6,r6,1 /* Increment */
- cmpw r6,r9 /* Are we done? */
- bne 1b /* If not, repeat */
-
- /* Invalidate TLB0 */
- li r6,0x04
- tlbivax 0,r6
-#ifdef CONFIG_SMP
- tlbsync
-#endif
- /* Invalidate TLB1 */
- li r6,0x0c
- tlbivax 0,r6
-#ifdef CONFIG_SMP
- tlbsync
-#endif
- msync
-
-/* 3. Setup a temp mapping and jump to it */
- andi. r5, r3, 0x1 /* Find an entry not used and is non-zero */
- addi r5, r5, 0x1
- lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */
- rlwimi r7,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */
- mtspr SPRN_MAS0,r7
- tlbre
-
- /* Just modify the entry ID and EPN for the temp mapping */
- lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */
- rlwimi r7,r5,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r5) */
- mtspr SPRN_MAS0,r7
- xori r6,r4,1 /* Setup TMP mapping in the other Address space */
- slwi r6,r6,12
- oris r6,r6,(MAS1_VALID|MAS1_IPROT)@h
- ori r6,r6,(MAS1_TSIZE(BOOKE_PAGESZ_4K))@l
- mtspr SPRN_MAS1,r6
- mfspr r6,SPRN_MAS2
- li r7,0 /* temp EPN = 0 */
- rlwimi r7,r6,0,20,31
- mtspr SPRN_MAS2,r7
- tlbwe
-
- xori r6,r4,1
- slwi r6,r6,5 /* setup new context with other address space */
- bl 1f /* Find our address */
-1: mflr r9
- rlwimi r7,r9,0,20,31
- addi r7,r7,24
- mtspr SPRN_SRR0,r7
- mtspr SPRN_SRR1,r6
- rfi
-
-/* 4. Clear out PIDs & Search info */
- li r6,0
- mtspr SPRN_PID0,r6
-#ifndef CONFIG_E200
- mtspr SPRN_PID1,r6
- mtspr SPRN_PID2,r6
-#endif
- mtspr SPRN_MAS6,r6
-
-/* 5. Invalidate mapping we started in */
- lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */
- rlwimi r7,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */
- mtspr SPRN_MAS0,r7
- tlbre
- mfspr r6,SPRN_MAS1
- rlwinm r6,r6,0,2,0 /* clear IPROT */
- mtspr SPRN_MAS1,r6
- tlbwe
- /* Invalidate TLB1 */
- li r9,0x0c
- tlbivax 0,r9
-#ifdef CONFIG_SMP
- tlbsync
-#endif
- msync
-
-/* 6. Setup KERNELBASE mapping in TLB1[0] */
- lis r6,0x1000 /* Set MAS0(TLBSEL) = TLB1(1), ESEL = 0 */
- mtspr SPRN_MAS0,r6
- lis r6,(MAS1_VALID|MAS1_IPROT)@h
- ori r6,r6,(MAS1_TSIZE(BOOKE_PAGESZ_16M))@l
- mtspr SPRN_MAS1,r6
- li r7,0
- lis r6,KERNELBASE@h
- ori r6,r6,KERNELBASE@l
- rlwimi r6,r7,0,20,31
- mtspr SPRN_MAS2,r6
- li r7,(MAS3_SX|MAS3_SW|MAS3_SR)
- mtspr SPRN_MAS3,r7
- tlbwe
-
-/* 7. Jump to KERNELBASE mapping */
- lis r7,MSR_KERNEL@h
- ori r7,r7,MSR_KERNEL@l
- bl 1f /* Find our address */
-1: mflr r9
- rlwimi r6,r9,0,20,31
- addi r6,r6,24
- mtspr SPRN_SRR0,r6
- mtspr SPRN_SRR1,r7
- rfi /* start execution out of TLB1[0] entry */
-
-/* 8. Clear out the temp mapping */
- lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */
- rlwimi r7,r5,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r5) */
- mtspr SPRN_MAS0,r7
- tlbre
- mfspr r8,SPRN_MAS1
- rlwinm r8,r8,0,2,0 /* clear IPROT */
- mtspr SPRN_MAS1,r8
- tlbwe
- /* Invalidate TLB1 */
- li r9,0x0c
- tlbivax 0,r9
-#ifdef CONFIG_SMP
- tlbsync
-#endif
- msync
-
- /* Establish the interrupt vector offsets */
- SET_IVOR(0, CriticalInput);
- SET_IVOR(1, MachineCheck);
- SET_IVOR(2, DataStorage);
- SET_IVOR(3, InstructionStorage);
- SET_IVOR(4, ExternalInput);
- SET_IVOR(5, Alignment);
- SET_IVOR(6, Program);
- SET_IVOR(7, FloatingPointUnavailable);
- SET_IVOR(8, SystemCall);
- SET_IVOR(9, AuxillaryProcessorUnavailable);
- SET_IVOR(10, Decrementer);
- SET_IVOR(11, FixedIntervalTimer);
- SET_IVOR(12, WatchdogTimer);
- SET_IVOR(13, DataTLBError);
- SET_IVOR(14, InstructionTLBError);
- SET_IVOR(15, Debug);
- SET_IVOR(32, SPEUnavailable);
- SET_IVOR(33, SPEFloatingPointData);
- SET_IVOR(34, SPEFloatingPointRound);
-#ifndef CONFIG_E200
- SET_IVOR(35, PerformanceMonitor);
-#endif
-
- /* Establish the interrupt vector base */
- lis r4,interrupt_base@h /* IVPR only uses the high 16-bits */
- mtspr SPRN_IVPR,r4
-
- /* Setup the defaults for TLB entries */
- li r2,(MAS4_TSIZED(BOOKE_PAGESZ_4K))@l
-#ifdef CONFIG_E200
- oris r2,r2,MAS4_TLBSELD(1)@h
-#endif
- mtspr SPRN_MAS4, r2
-
-#if 0
- /* Enable DOZE */
- mfspr r2,SPRN_HID0
- oris r2,r2,HID0_DOZE@h
- mtspr SPRN_HID0, r2
-#endif
-#ifdef CONFIG_E200
- /* enable dedicated debug exception handling resources (Debug APU) */
- mfspr r2,SPRN_HID0
- ori r2,r2,HID0_DAPUEN@l
- mtspr SPRN_HID0,r2
-#endif
-
-#if !defined(CONFIG_BDI_SWITCH)
- /*
- * The Abatron BDI JTAG debugger does not tolerate others
- * mucking with the debug registers.
- */
- lis r2,DBCR0_IDM@h
- mtspr SPRN_DBCR0,r2
- isync
- /* clear any residual debug events */
- li r2,-1
- mtspr SPRN_DBSR,r2
-#endif
-
- /*
- * This is where the main kernel code starts.
- */
-
- /* ptr to current */
- lis r2,init_task@h
- ori r2,r2,init_task@l
-
- /* ptr to current thread */
- addi r4,r2,THREAD /* init task's THREAD */
- mtspr SPRN_SPRG3,r4
-
- /* stack */
- lis r1,init_thread_union@h
- ori r1,r1,init_thread_union@l
- li r0,0
- stwu r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1)
-
- bl early_init
-
- mfspr r3,SPRN_TLB1CFG
- andi. r3,r3,0xfff
- lis r4,num_tlbcam_entries@ha
- stw r3,num_tlbcam_entries@l(r4)
-/*
- * Decide what sort of machine this is and initialize the MMU.
- */
- mr r3,r31
- mr r4,r30
- mr r5,r29
- mr r6,r28
- mr r7,r27
- bl machine_init
- bl MMU_init
-
- /* Setup PTE pointers for the Abatron bdiGDB */
- lis r6, swapper_pg_dir@h
- ori r6, r6, swapper_pg_dir@l
- lis r5, abatron_pteptrs@h
- ori r5, r5, abatron_pteptrs@l
- lis r4, KERNELBASE@h
- ori r4, r4, KERNELBASE@l
- stw r5, 0(r4) /* Save abatron_pteptrs at a fixed location */
- stw r6, 0(r5)
-
- /* Let's move on */
- lis r4,start_kernel@h
- ori r4,r4,start_kernel@l
- lis r3,MSR_KERNEL@h
- ori r3,r3,MSR_KERNEL@l
- mtspr SPRN_SRR0,r4
- mtspr SPRN_SRR1,r3
- rfi /* change context and jump to start_kernel */
-
-/* Macros to hide the PTE size differences
- *
- * FIND_PTE -- walks the page tables given EA & pgdir pointer
- * r10 -- EA of fault
- * r11 -- PGDIR pointer
- * r12 -- free
- * label 2: is the bailout case
- *
- * if we find the pte (fall through):
- * r11 is low pte word
- * r12 is pointer to the pte
- */
-#ifdef CONFIG_PTE_64BIT
-#define PTE_FLAGS_OFFSET 4
-#define FIND_PTE \
- rlwinm r12, r10, 13, 19, 29; /* Compute pgdir/pmd offset */ \
- lwzx r11, r12, r11; /* Get pgd/pmd entry */ \
- rlwinm. r12, r11, 0, 0, 20; /* Extract pt base address */ \
- beq 2f; /* Bail if no table */ \
- rlwimi r12, r10, 23, 20, 28; /* Compute pte address */ \
- lwz r11, 4(r12); /* Get pte entry */
-#else
-#define PTE_FLAGS_OFFSET 0
-#define FIND_PTE \
- rlwimi r11, r10, 12, 20, 29; /* Create L1 (pgdir/pmd) address */ \
- lwz r11, 0(r11); /* Get L1 entry */ \
- rlwinm. r12, r11, 0, 0, 19; /* Extract L2 (pte) base address */ \
- beq 2f; /* Bail if no table */ \
- rlwimi r12, r10, 22, 20, 29; /* Compute PTE address */ \
- lwz r11, 0(r12); /* Get Linux PTE */
-#endif
-
-/*
- * Interrupt vector entry code
- *
- * The Book E MMUs are always on so we don't need to handle
- * interrupts in real mode as with previous PPC processors. In
- * this case we handle interrupts in the kernel virtual address
- * space.
- *
- * Interrupt vectors are dynamically placed relative to the
- * interrupt prefix as determined by the address of interrupt_base.
- * The interrupt vectors offsets are programmed using the labels
- * for each interrupt vector entry.
- *
- * Interrupt vectors must be aligned on a 16 byte boundary.
- * We align on a 32 byte cache line boundary for good measure.
- */
-
-interrupt_base:
- /* Critical Input Interrupt */
- CRITICAL_EXCEPTION(0x0100, CriticalInput, unknown_exception)
-
- /* Machine Check Interrupt */
-#ifdef CONFIG_E200
- /* no RFMCI, MCSRRs on E200 */
- CRITICAL_EXCEPTION(0x0200, MachineCheck, machine_check_exception)
-#else
- MCHECK_EXCEPTION(0x0200, MachineCheck, machine_check_exception)
-#endif
-
- /* Data Storage Interrupt */
- START_EXCEPTION(DataStorage)
- mtspr SPRN_SPRG0, r10 /* Save some working registers */
- mtspr SPRN_SPRG1, r11
- mtspr SPRN_SPRG4W, r12
- mtspr SPRN_SPRG5W, r13
- mfcr r11
- mtspr SPRN_SPRG7W, r11
-
- /*
- * Check if it was a store fault, if not then bail
- * because a user tried to access a kernel or
- * read-protected page. Otherwise, get the
- * offending address and handle it.
- */
- mfspr r10, SPRN_ESR
- andis. r10, r10, ESR_ST@h
- beq 2f
-
- mfspr r10, SPRN_DEAR /* Get faulting address */
-
- /* If we are faulting a kernel address, we have to use the
- * kernel page tables.
- */
- lis r11, TASK_SIZE@h
- ori r11, r11, TASK_SIZE@l
- cmplw 0, r10, r11
- bge 2f
-
- /* Get the PGD for the current thread */
-3:
- mfspr r11,SPRN_SPRG3
- lwz r11,PGDIR(r11)
-4:
- FIND_PTE
-
- /* Are _PAGE_USER & _PAGE_RW set & _PAGE_HWWRITE not? */
- andi. r13, r11, _PAGE_RW|_PAGE_USER|_PAGE_HWWRITE
- cmpwi 0, r13, _PAGE_RW|_PAGE_USER
- bne 2f /* Bail if not */
-
- /* Update 'changed'. */
- ori r11, r11, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
- stw r11, PTE_FLAGS_OFFSET(r12) /* Update Linux page table */
-
- /* MAS2 not updated as the entry does exist in the tlb, this
- fault taken to detect state transition (eg: COW -> DIRTY)
- */
- andi. r11, r11, _PAGE_HWEXEC
- rlwimi r11, r11, 31, 27, 27 /* SX <- _PAGE_HWEXEC */
- ori r11, r11, (MAS3_UW|MAS3_SW|MAS3_UR|MAS3_SR)@l /* set static perms */
-
- /* update search PID in MAS6, AS = 0 */
- mfspr r12, SPRN_PID0
- slwi r12, r12, 16
- mtspr SPRN_MAS6, r12
-
- /* find the TLB index that caused the fault. It has to be here. */
- tlbsx 0, r10
-
- /* only update the perm bits, assume the RPN is fine */
- mfspr r12, SPRN_MAS3
- rlwimi r12, r11, 0, 20, 31
- mtspr SPRN_MAS3,r12
- tlbwe
-
- /* Done...restore registers and get out of here. */
- mfspr r11, SPRN_SPRG7R
- mtcr r11
- mfspr r13, SPRN_SPRG5R
- mfspr r12, SPRN_SPRG4R
- mfspr r11, SPRN_SPRG1
- mfspr r10, SPRN_SPRG0
- rfi /* Force context change */
-
-2:
- /*
- * The bailout. Restore registers to pre-exception conditions
- * and call the heavyweights to help us out.
- */
- mfspr r11, SPRN_SPRG7R
- mtcr r11
- mfspr r13, SPRN_SPRG5R
- mfspr r12, SPRN_SPRG4R
- mfspr r11, SPRN_SPRG1
- mfspr r10, SPRN_SPRG0
- b data_access
-
- /* Instruction Storage Interrupt */
- INSTRUCTION_STORAGE_EXCEPTION
-
- /* External Input Interrupt */
- EXCEPTION(0x0500, ExternalInput, do_IRQ, EXC_XFER_LITE)
-
- /* Alignment Interrupt */
- ALIGNMENT_EXCEPTION
-
- /* Program Interrupt */
- PROGRAM_EXCEPTION
-
- /* Floating Point Unavailable Interrupt */
-#ifdef CONFIG_PPC_FPU
- FP_UNAVAILABLE_EXCEPTION
-#else
-#ifdef CONFIG_E200
- /* E200 treats 'normal' floating point instructions as FP Unavail exception */
- EXCEPTION(0x0800, FloatingPointUnavailable, program_check_exception, EXC_XFER_EE)
-#else
- EXCEPTION(0x0800, FloatingPointUnavailable, unknown_exception, EXC_XFER_EE)
-#endif
-#endif
-
- /* System Call Interrupt */
- START_EXCEPTION(SystemCall)
- NORMAL_EXCEPTION_PROLOG
- EXC_XFER_EE_LITE(0x0c00, DoSyscall)
-
- /* Auxillary Processor Unavailable Interrupt */
- EXCEPTION(0x2900, AuxillaryProcessorUnavailable, unknown_exception, EXC_XFER_EE)
-
- /* Decrementer Interrupt */
- DECREMENTER_EXCEPTION
-
- /* Fixed Internal Timer Interrupt */
- /* TODO: Add FIT support */
- EXCEPTION(0x3100, FixedIntervalTimer, unknown_exception, EXC_XFER_EE)
-
- /* Watchdog Timer Interrupt */
-#ifdef CONFIG_BOOKE_WDT
- CRITICAL_EXCEPTION(0x3200, WatchdogTimer, WatchdogException)
-#else
- CRITICAL_EXCEPTION(0x3200, WatchdogTimer, unknown_exception)
-#endif
-
- /* Data TLB Error Interrupt */
- START_EXCEPTION(DataTLBError)
- mtspr SPRN_SPRG0, r10 /* Save some working registers */
- mtspr SPRN_SPRG1, r11
- mtspr SPRN_SPRG4W, r12
- mtspr SPRN_SPRG5W, r13
- mfcr r11
- mtspr SPRN_SPRG7W, r11
- mfspr r10, SPRN_DEAR /* Get faulting address */
-
- /* If we are faulting a kernel address, we have to use the
- * kernel page tables.
- */
- lis r11, TASK_SIZE@h
- ori r11, r11, TASK_SIZE@l
- cmplw 5, r10, r11
- blt 5, 3f
- lis r11, swapper_pg_dir@h
- ori r11, r11, swapper_pg_dir@l
-
- mfspr r12,SPRN_MAS1 /* Set TID to 0 */
- rlwinm r12,r12,0,16,1
- mtspr SPRN_MAS1,r12
-
- b 4f
-
- /* Get the PGD for the current thread */
-3:
- mfspr r11,SPRN_SPRG3
- lwz r11,PGDIR(r11)
-
-4:
- FIND_PTE
- andi. r13, r11, _PAGE_PRESENT /* Is the page present? */
- beq 2f /* Bail if not present */
-
-#ifdef CONFIG_PTE_64BIT
- lwz r13, 0(r12)
-#endif
- ori r11, r11, _PAGE_ACCESSED
- stw r11, PTE_FLAGS_OFFSET(r12)
-
- /* Jump to common tlb load */
- b finish_tlb_load
-2:
- /* The bailout. Restore registers to pre-exception conditions
- * and call the heavyweights to help us out.
- */
- mfspr r11, SPRN_SPRG7R
- mtcr r11
- mfspr r13, SPRN_SPRG5R
- mfspr r12, SPRN_SPRG4R
- mfspr r11, SPRN_SPRG1
- mfspr r10, SPRN_SPRG0
- b data_access
-
- /* Instruction TLB Error Interrupt */
- /*
- * Nearly the same as above, except we get our
- * information from different registers and bailout
- * to a different point.
- */
- START_EXCEPTION(InstructionTLBError)
- mtspr SPRN_SPRG0, r10 /* Save some working registers */
- mtspr SPRN_SPRG1, r11
- mtspr SPRN_SPRG4W, r12
- mtspr SPRN_SPRG5W, r13
- mfcr r11
- mtspr SPRN_SPRG7W, r11
- mfspr r10, SPRN_SRR0 /* Get faulting address */
-
- /* If we are faulting a kernel address, we have to use the
- * kernel page tables.
- */
- lis r11, TASK_SIZE@h
- ori r11, r11, TASK_SIZE@l
- cmplw 5, r10, r11
- blt 5, 3f
- lis r11, swapper_pg_dir@h
- ori r11, r11, swapper_pg_dir@l
-
- mfspr r12,SPRN_MAS1 /* Set TID to 0 */
- rlwinm r12,r12,0,16,1
- mtspr SPRN_MAS1,r12
-
- b 4f
-
- /* Get the PGD for the current thread */
-3:
- mfspr r11,SPRN_SPRG3
- lwz r11,PGDIR(r11)
-
-4:
- FIND_PTE
- andi. r13, r11, _PAGE_PRESENT /* Is the page present? */
- beq 2f /* Bail if not present */
-
-#ifdef CONFIG_PTE_64BIT
- lwz r13, 0(r12)
-#endif
- ori r11, r11, _PAGE_ACCESSED
- stw r11, PTE_FLAGS_OFFSET(r12)
-
- /* Jump to common TLB load point */
- b finish_tlb_load
-
-2:
- /* The bailout. Restore registers to pre-exception conditions
- * and call the heavyweights to help us out.
- */
- mfspr r11, SPRN_SPRG7R
- mtcr r11
- mfspr r13, SPRN_SPRG5R
- mfspr r12, SPRN_SPRG4R
- mfspr r11, SPRN_SPRG1
- mfspr r10, SPRN_SPRG0
- b InstructionStorage
-
-#ifdef CONFIG_SPE
- /* SPE Unavailable */
- START_EXCEPTION(SPEUnavailable)
- NORMAL_EXCEPTION_PROLOG
- bne load_up_spe
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_EE_LITE(0x2010, KernelSPE)
-#else
- EXCEPTION(0x2020, SPEUnavailable, unknown_exception, EXC_XFER_EE)
-#endif /* CONFIG_SPE */
-
- /* SPE Floating Point Data */
-#ifdef CONFIG_SPE
- EXCEPTION(0x2030, SPEFloatingPointData, SPEFloatingPointException, EXC_XFER_EE);
-#else
- EXCEPTION(0x2040, SPEFloatingPointData, unknown_exception, EXC_XFER_EE)
-#endif /* CONFIG_SPE */
-
- /* SPE Floating Point Round */
- EXCEPTION(0x2050, SPEFloatingPointRound, unknown_exception, EXC_XFER_EE)
-
- /* Performance Monitor */
- EXCEPTION(0x2060, PerformanceMonitor, performance_monitor_exception, EXC_XFER_STD)
-
-
- /* Debug Interrupt */
- DEBUG_EXCEPTION
-
-/*
- * Local functions
- */
-
- /*
- * Data TLB exceptions will bail out to this point
- * if they can't resolve the lightweight TLB fault.
- */
-data_access:
- NORMAL_EXCEPTION_PROLOG
- mfspr r5,SPRN_ESR /* Grab the ESR, save it, pass arg3 */
- stw r5,_ESR(r11)
- mfspr r4,SPRN_DEAR /* Grab the DEAR, save it, pass arg2 */
- andis. r10,r5,(ESR_ILK|ESR_DLK)@h
- bne 1f
- EXC_XFER_EE_LITE(0x0300, handle_page_fault)
-1:
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_EE_LITE(0x0300, CacheLockingException)
-
-/*
-
- * Both the instruction and data TLB miss get to this
- * point to load the TLB.
- * r10 - EA of fault
- * r11 - TLB (info from Linux PTE)
- * r12, r13 - available to use
- * CR5 - results of addr < TASK_SIZE
- * MAS0, MAS1 - loaded with proper value when we get here
- * MAS2, MAS3 - will need additional info from Linux PTE
- * Upon exit, we reload everything and RFI.
- */
-finish_tlb_load:
- /*
- * We set execute, because we don't have the granularity to
- * properly set this at the page level (Linux problem).
- * Many of these bits are software only. Bits we don't set
- * here we (properly should) assume have the appropriate value.
- */
-
- mfspr r12, SPRN_MAS2
-#ifdef CONFIG_PTE_64BIT
- rlwimi r12, r11, 26, 24, 31 /* extract ...WIMGE from pte */
-#else
- rlwimi r12, r11, 26, 27, 31 /* extract WIMGE from pte */
-#endif
- mtspr SPRN_MAS2, r12
-
- bge 5, 1f
-
- /* is user addr */
- andi. r12, r11, (_PAGE_USER | _PAGE_HWWRITE | _PAGE_HWEXEC)
- andi. r10, r11, _PAGE_USER /* Test for _PAGE_USER */
- srwi r10, r12, 1
- or r12, r12, r10 /* Copy user perms into supervisor */
- iseleq r12, 0, r12
- b 2f
-
- /* is kernel addr */
-1: rlwinm r12, r11, 31, 29, 29 /* Extract _PAGE_HWWRITE into SW */
- ori r12, r12, (MAS3_SX | MAS3_SR)
-
-#ifdef CONFIG_PTE_64BIT
-2: rlwimi r12, r13, 24, 0, 7 /* grab RPN[32:39] */
- rlwimi r12, r11, 24, 8, 19 /* grab RPN[40:51] */
- mtspr SPRN_MAS3, r12
-BEGIN_FTR_SECTION
- srwi r10, r13, 8 /* grab RPN[8:31] */
- mtspr SPRN_MAS7, r10
-END_FTR_SECTION_IFSET(CPU_FTR_BIG_PHYS)
-#else
-2: rlwimi r11, r12, 0, 20, 31 /* Extract RPN from PTE and merge with perms */
- mtspr SPRN_MAS3, r11
-#endif
-#ifdef CONFIG_E200
- /* Round robin TLB1 entries assignment */
- mfspr r12, SPRN_MAS0
-
- /* Extract TLB1CFG(NENTRY) */
- mfspr r11, SPRN_TLB1CFG
- andi. r11, r11, 0xfff
-
- /* Extract MAS0(NV) */
- andi. r13, r12, 0xfff
- addi r13, r13, 1
- cmpw 0, r13, r11
- addi r12, r12, 1
-
- /* check if we need to wrap */
- blt 7f
-
- /* wrap back to first free tlbcam entry */
- lis r13, tlbcam_index@ha
- lwz r13, tlbcam_index@l(r13)
- rlwimi r12, r13, 0, 20, 31
-7:
- mtspr SPRN_MAS0,r12
-#endif /* CONFIG_E200 */
-
- tlbwe
-
- /* Done...restore registers and get out of here. */
- mfspr r11, SPRN_SPRG7R
- mtcr r11
- mfspr r13, SPRN_SPRG5R
- mfspr r12, SPRN_SPRG4R
- mfspr r11, SPRN_SPRG1
- mfspr r10, SPRN_SPRG0
- rfi /* Force context change */
-
-#ifdef CONFIG_SPE
-/* Note that the SPE support is closely modeled after the AltiVec
- * support. Changes to one are likely to be applicable to the
- * other! */
-load_up_spe:
-/*
- * Disable SPE for the task which had SPE previously,
- * and save its SPE registers in its thread_struct.
- * Enables SPE for use in the kernel on return.
- * On SMP we know the SPE units are free, since we give it up every
- * switch. -- Kumar
- */
- mfmsr r5
- oris r5,r5,MSR_SPE@h
- mtmsr r5 /* enable use of SPE now */
- isync
-/*
- * For SMP, we don't do lazy SPE switching because it just gets too
- * horrendously complex, especially when a task switches from one CPU
- * to another. Instead we call giveup_spe in switch_to.
- */
-#ifndef CONFIG_SMP
- lis r3,last_task_used_spe@ha
- lwz r4,last_task_used_spe@l(r3)
- cmpi 0,r4,0
- beq 1f
- addi r4,r4,THREAD /* want THREAD of last_task_used_spe */
- SAVE_32EVRS(0,r10,r4)
- evxor evr10, evr10, evr10 /* clear out evr10 */
- evmwumiaa evr10, evr10, evr10 /* evr10 <- ACC = 0 * 0 + ACC */
- li r5,THREAD_ACC
- evstddx evr10, r4, r5 /* save off accumulator */
- lwz r5,PT_REGS(r4)
- lwz r4,_MSR-STACK_FRAME_OVERHEAD(r5)
- lis r10,MSR_SPE@h
- andc r4,r4,r10 /* disable SPE for previous task */
- stw r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#endif /* CONFIG_SMP */
- /* enable use of SPE after return */
- oris r9,r9,MSR_SPE@h
- mfspr r5,SPRN_SPRG3 /* current task's THREAD (phys) */
- li r4,1
- li r10,THREAD_ACC
- stw r4,THREAD_USED_SPE(r5)
- evlddx evr4,r10,r5
- evmra evr4,evr4
- REST_32EVRS(0,r10,r5)
-#ifndef CONFIG_SMP
- subi r4,r5,THREAD
- stw r4,last_task_used_spe@l(r3)
-#endif /* CONFIG_SMP */
- /* restore registers and return */
-2: REST_4GPRS(3, r11)
- lwz r10,_CCR(r11)
- REST_GPR(1, r11)
- mtcr r10
- lwz r10,_LINK(r11)
- mtlr r10
- REST_GPR(10, r11)
- mtspr SPRN_SRR1,r9
- mtspr SPRN_SRR0,r12
- REST_GPR(9, r11)
- REST_GPR(12, r11)
- lwz r11,GPR11(r11)
- rfi
-
-/*
- * SPE unavailable trap from kernel - print a message, but let
- * the task use SPE in the kernel until it returns to user mode.
- */
-KernelSPE:
- lwz r3,_MSR(r1)
- oris r3,r3,MSR_SPE@h
- stw r3,_MSR(r1) /* enable use of SPE after return */
- lis r3,87f@h
- ori r3,r3,87f@l
- mr r4,r2 /* current */
- lwz r5,_NIP(r1)
- bl printk
- b ret_from_except
-87: .string "SPE used in kernel (task=%p, pc=%x) \n"
- .align 4,0
-
-#endif /* CONFIG_SPE */
-
-/*
- * Global functions
- */
-
-/*
- * extern void loadcam_entry(unsigned int index)
- *
- * Load TLBCAM[index] entry in to the L2 CAM MMU
- */
-_GLOBAL(loadcam_entry)
- lis r4,TLBCAM@ha
- addi r4,r4,TLBCAM@l
- mulli r5,r3,20
- add r3,r5,r4
- lwz r4,0(r3)
- mtspr SPRN_MAS0,r4
- lwz r4,4(r3)
- mtspr SPRN_MAS1,r4
- lwz r4,8(r3)
- mtspr SPRN_MAS2,r4
- lwz r4,12(r3)
- mtspr SPRN_MAS3,r4
- tlbwe
- isync
- blr
-
-/*
- * extern void giveup_altivec(struct task_struct *prev)
- *
- * The e500 core does not have an AltiVec unit.
- */
-_GLOBAL(giveup_altivec)
- blr
-
-#ifdef CONFIG_SPE
-/*
- * extern void giveup_spe(struct task_struct *prev)
- *
- */
-_GLOBAL(giveup_spe)
- mfmsr r5
- oris r5,r5,MSR_SPE@h
- mtmsr r5 /* enable use of SPE now */
- isync
- cmpi 0,r3,0
- beqlr- /* if no previous owner, done */
- addi r3,r3,THREAD /* want THREAD of task */
- lwz r5,PT_REGS(r3)
- cmpi 0,r5,0
- SAVE_32EVRS(0, r4, r3)
- evxor evr6, evr6, evr6 /* clear out evr6 */
- evmwumiaa evr6, evr6, evr6 /* evr6 <- ACC = 0 * 0 + ACC */
- li r4,THREAD_ACC
- evstddx evr6, r4, r3 /* save off accumulator */
- mfspr r6,SPRN_SPEFSCR
- stw r6,THREAD_SPEFSCR(r3) /* save spefscr register value */
- beq 1f
- lwz r4,_MSR-STACK_FRAME_OVERHEAD(r5)
- lis r3,MSR_SPE@h
- andc r4,r4,r3 /* disable SPE for previous task */
- stw r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#ifndef CONFIG_SMP
- li r5,0
- lis r4,last_task_used_spe@ha
- stw r5,last_task_used_spe@l(r4)
-#endif /* CONFIG_SMP */
- blr
-#endif /* CONFIG_SPE */
-
-/*
- * extern void giveup_fpu(struct task_struct *prev)
- *
- * Not all FSL Book-E cores have an FPU
- */
-#ifndef CONFIG_PPC_FPU
-_GLOBAL(giveup_fpu)
- blr
-#endif
-
-/*
- * extern void abort(void)
- *
- * At present, this routine just applies a system reset.
- */
-_GLOBAL(abort)
- li r13,0
- mtspr SPRN_DBCR0,r13 /* disable all debug events */
- isync
- mfmsr r13
- ori r13,r13,MSR_DE@l /* Enable Debug Events */
- mtmsr r13
- isync
- mfspr r13,SPRN_DBCR0
- lis r13,(DBCR0_IDM|DBCR0_RST_CHIP)@h
- mtspr SPRN_DBCR0,r13
- isync
-
-_GLOBAL(set_context)
-
-#ifdef CONFIG_BDI_SWITCH
- /* Context switch the PTE pointer for the Abatron BDI2000.
- * The PGDIR is the second parameter.
- */
- lis r5, abatron_pteptrs@h
- ori r5, r5, abatron_pteptrs@l
- stw r4, 0x4(r5)
-#endif
- mtspr SPRN_PID,r3
- isync /* Force context change */
- blr
-
-/*
- * We put a few things here that have to be page-aligned. This stuff
- * goes at the beginning of the data segment, which is page-aligned.
- */
- .data
- .align 12
- .globl sdata
-sdata:
- .globl empty_zero_page
-empty_zero_page:
- .space 4096
- .globl swapper_pg_dir
-swapper_pg_dir:
- .space 4096
-
-/* Reserved 4k for the critical exception stack & 4k for the machine
- * check stack per CPU for kernel mode exceptions */
- .section .bss
- .align 12
-exception_stack_bottom:
- .space BOOKE_EXCEPTION_STACK_SIZE * NR_CPUS
- .globl exception_stack_top
-exception_stack_top:
-
-/*
- * This space gets a copy of optional info passed to us by the bootstrap
- * which is used to pass parameters into the kernel like root=/dev/sda1, etc.
- */
- .globl cmd_line
-cmd_line:
- .space 512
-
-/*
- * Room for two PTE pointers, usually the kernel and current user pointers
- * to their respective root page table.
- */
-abatron_pteptrs:
- .space 8
diff --git a/arch/ppc/kernel/misc.S b/arch/ppc/kernel/misc.S
index e0c850d..d5e0dfc 100644
--- a/arch/ppc/kernel/misc.S
+++ b/arch/ppc/kernel/misc.S
@@ -165,24 +165,7 @@ _GLOBAL(_tlbia)
ble 1b
isync
-#elif defined(CONFIG_FSL_BOOKE)
- /* Invalidate all entries in TLB0 */
- li r3, 0x04
- tlbivax 0,3
- /* Invalidate all entries in TLB1 */
- li r3, 0x0c
- tlbivax 0,3
- /* Invalidate all entries in TLB2 */
- li r3, 0x14
- tlbivax 0,3
- /* Invalidate all entries in TLB3 */
- li r3, 0x1c
- tlbivax 0,3
- msync
-#ifdef CONFIG_SMP
- tlbsync
-#endif /* CONFIG_SMP */
-#else /* !(CONFIG_40x || CONFIG_44x || CONFIG_FSL_BOOKE) */
+#else /* !(CONFIG_40x || CONFIG_44x) */
#if defined(CONFIG_SMP)
rlwinm r8,r1,0,0,18
lwz r8,TI_CPU(r8)
@@ -268,20 +251,7 @@ _GLOBAL(_tlbie)
tlbwe r3, r3, PPC44x_TLB_PAGEID
isync
10:
-#elif defined(CONFIG_FSL_BOOKE)
- rlwinm r4, r3, 0, 0, 19
- ori r5, r4, 0x08 /* TLBSEL = 1 */
- ori r6, r4, 0x10 /* TLBSEL = 2 */
- ori r7, r4, 0x18 /* TLBSEL = 3 */
- tlbivax 0, r4
- tlbivax 0, r5
- tlbivax 0, r6
- tlbivax 0, r7
- msync
-#if defined(CONFIG_SMP)
- tlbsync
-#endif /* CONFIG_SMP */
-#else /* !(CONFIG_40x || CONFIG_44x || CONFIG_FSL_BOOKE) */
+#else /* !(CONFIG_40x || CONFIG_44x) */
#if defined(CONFIG_SMP)
rlwinm r8,r1,0,0,18
lwz r8,TI_CPU(r8)
@@ -338,18 +308,6 @@ _GLOBAL(flush_instruction_cache)
lis r3, KERNELBASE@h
iccci 0,r3
#endif
-#elif CONFIG_FSL_BOOKE
-BEGIN_FTR_SECTION
- mfspr r3,SPRN_L1CSR0
- ori r3,r3,L1CSR0_CFI|L1CSR0_CLFC
- /* msync; isync recommended here */
- mtspr SPRN_L1CSR0,r3
- isync
- blr
-END_FTR_SECTION_IFSET(CPU_FTR_UNIFIED_ID_CACHE)
- mfspr r3,SPRN_L1CSR1
- ori r3,r3,L1CSR1_ICFI|L1CSR1_ICLFR
- mtspr SPRN_L1CSR1,r3
#else
mfspr r3,SPRN_PVR
rlwinm r3,r3,16,16,31
diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c
index ba729ce..c353502 100644
--- a/arch/ppc/kernel/ppc_ksyms.c
+++ b/arch/ppc/kernel/ppc_ksyms.c
@@ -166,12 +166,6 @@ EXPORT_SYMBOL(last_task_used_altivec);
#endif
EXPORT_SYMBOL(giveup_altivec);
#endif /* CONFIG_ALTIVEC */
-#ifdef CONFIG_SPE
-#ifndef CONFIG_SMP
-EXPORT_SYMBOL(last_task_used_spe);
-#endif
-EXPORT_SYMBOL(giveup_spe);
-#endif /* CONFIG_SPE */
#ifdef CONFIG_SMP
EXPORT_SYMBOL(smp_call_function);
EXPORT_SYMBOL(smp_hw_index);
@@ -244,7 +238,7 @@ EXPORT_SYMBOL(debugger_fault_handler);
EXPORT_SYMBOL(cpm_install_handler);
EXPORT_SYMBOL(cpm_free_handler);
#endif /* CONFIG_8xx */
-#if defined(CONFIG_8xx) || defined(CONFIG_40x) || defined(CONFIG_85xx)
+#if defined(CONFIG_8xx) || defined(CONFIG_40x)
EXPORT_SYMBOL(__res);
#endif
diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c
index 5888ae6..d51368d 100644
--- a/arch/ppc/kernel/setup.c
+++ b/arch/ppc/kernel/setup.c
@@ -38,8 +38,7 @@
#include <asm/xmon.h>
#include <asm/ocp.h>
-#define USES_PPC_SYS (defined(CONFIG_85xx) || \
- defined(CONFIG_MPC10X_BRIDGE) || defined(CONFIG_8260) || \
+#define USES_PPC_SYS (defined(CONFIG_MPC10X_BRIDGE) || defined(CONFIG_8260) || \
defined(CONFIG_PPC_MPC52xx))
#if USES_PPC_SYS
diff --git a/arch/ppc/kernel/traps.c b/arch/ppc/kernel/traps.c
index 25a1085..a467a42 100644
--- a/arch/ppc/kernel/traps.c
+++ b/arch/ppc/kernel/traps.c
@@ -194,11 +194,7 @@ static inline int check_io_access(struct pt_regs *regs)
/* On 4xx, the reason for the machine check or program exception
is in the ESR. */
#define get_reason(regs) ((regs)->dsisr)
-#ifndef CONFIG_FSL_BOOKE
#define get_mc_reason(regs) ((regs)->dsisr)
-#else
-#define get_mc_reason(regs) (mfspr(SPRN_MCSR))
-#endif
#define REASON_FP ESR_FP
#define REASON_ILLEGAL (ESR_PIL | ESR_PUO)
#define REASON_PRIVILEGED ESR_PPR
@@ -281,66 +277,6 @@ int machine_check_440A(struct pt_regs *regs)
}
return 0;
}
-#elif defined(CONFIG_E500)
-int machine_check_e500(struct pt_regs *regs)
-{
- unsigned long reason = get_mc_reason(regs);
-
- printk("Machine check in kernel mode.\n");
- printk("Caused by (from MCSR=%lx): ", reason);
-
- if (reason & MCSR_MCP)
- printk("Machine Check Signal\n");
- if (reason & MCSR_ICPERR)
- printk("Instruction Cache Parity Error\n");
- if (reason & MCSR_DCP_PERR)
- printk("Data Cache Push Parity Error\n");
- if (reason & MCSR_DCPERR)
- printk("Data Cache Parity Error\n");
- if (reason & MCSR_BUS_IAERR)
- printk("Bus - Instruction Address Error\n");
- if (reason & MCSR_BUS_RAERR)
- printk("Bus - Read Address Error\n");
- if (reason & MCSR_BUS_WAERR)
- printk("Bus - Write Address Error\n");
- if (reason & MCSR_BUS_IBERR)
- printk("Bus - Instruction Data Error\n");
- if (reason & MCSR_BUS_RBERR)
- printk("Bus - Read Data Bus Error\n");
- if (reason & MCSR_BUS_WBERR)
- printk("Bus - Read Data Bus Error\n");
- if (reason & MCSR_BUS_IPERR)
- printk("Bus - Instruction Parity Error\n");
- if (reason & MCSR_BUS_RPERR)
- printk("Bus - Read Parity Error\n");
-
- return 0;
-}
-#elif defined(CONFIG_E200)
-int machine_check_e200(struct pt_regs *regs)
-{
- unsigned long reason = get_mc_reason(regs);
-
- printk("Machine check in kernel mode.\n");
- printk("Caused by (from MCSR=%lx): ", reason);
-
- if (reason & MCSR_MCP)
- printk("Machine Check Signal\n");
- if (reason & MCSR_CP_PERR)
- printk("Cache Push Parity Error\n");
- if (reason & MCSR_CPERR)
- printk("Cache Parity Error\n");
- if (reason & MCSR_EXCP_ERR)
- printk("ISI, ITLB, or Bus Error on first instruction fetch for an exception handler\n");
- if (reason & MCSR_BUS_IRERR)
- printk("Bus - Read Bus Error on instruction fetch\n");
- if (reason & MCSR_BUS_DRERR)
- printk("Bus - Read Bus Error on data load\n");
- if (reason & MCSR_BUS_WRERR)
- printk("Bus - Write Bus Error on buffered store or cache line push\n");
-
- return 0;
-}
#else
int machine_check_generic(struct pt_regs *regs)
{
@@ -866,63 +802,6 @@ void altivec_assist_exception(struct pt_regs *regs)
}
#endif /* CONFIG_ALTIVEC */
-#ifdef CONFIG_E500
-void performance_monitor_exception(struct pt_regs *regs)
-{
- perf_irq(regs);
-}
-#endif
-
-#ifdef CONFIG_FSL_BOOKE
-void CacheLockingException(struct pt_regs *regs, unsigned long address,
- unsigned long error_code)
-{
- /* We treat cache locking instructions from the user
- * as priv ops, in the future we could try to do
- * something smarter
- */
- if (error_code & (ESR_DLK|ESR_ILK))
- _exception(SIGILL, regs, ILL_PRVOPC, regs->nip);
- return;
-}
-#endif /* CONFIG_FSL_BOOKE */
-
-#ifdef CONFIG_SPE
-void SPEFloatingPointException(struct pt_regs *regs)
-{
- unsigned long spefscr;
- int fpexc_mode;
- int code = 0;
-
- spefscr = current->thread.spefscr;
- fpexc_mode = current->thread.fpexc_mode;
-
- /* Hardware does not necessarily set sticky
- * underflow/overflow/invalid flags */
- if ((spefscr & SPEFSCR_FOVF) && (fpexc_mode & PR_FP_EXC_OVF)) {
- code = FPE_FLTOVF;
- spefscr |= SPEFSCR_FOVFS;
- }
- else if ((spefscr & SPEFSCR_FUNF) && (fpexc_mode & PR_FP_EXC_UND)) {
- code = FPE_FLTUND;
- spefscr |= SPEFSCR_FUNFS;
- }
- else if ((spefscr & SPEFSCR_FDBZ) && (fpexc_mode & PR_FP_EXC_DIV))
- code = FPE_FLTDIV;
- else if ((spefscr & SPEFSCR_FINV) && (fpexc_mode & PR_FP_EXC_INV)) {
- code = FPE_FLTINV;
- spefscr |= SPEFSCR_FINVS;
- }
- else if ((spefscr & (SPEFSCR_FG | SPEFSCR_FX)) && (fpexc_mode & PR_FP_EXC_RES))
- code = FPE_FLTRES;
-
- current->thread.spefscr = spefscr;
-
- _exception(SIGFPE, regs, code, regs->nip);
- return;
-}
-#endif
-
#ifdef CONFIG_BOOKE_WDT
/*
* Default handler for a Watchdog exception,
diff --git a/arch/ppc/mm/Makefile b/arch/ppc/mm/Makefile
index cd3eae1..691ba2b 100644
--- a/arch/ppc/mm/Makefile
+++ b/arch/ppc/mm/Makefile
@@ -8,4 +8,3 @@ obj-y := fault.o init.o mem_pieces.o \
obj-$(CONFIG_PPC_STD_MMU) += hashtable.o ppc_mmu.o tlb.o
obj-$(CONFIG_40x) += 4xx_mmu.o
obj-$(CONFIG_44x) += 44x_mmu.o
-obj-$(CONFIG_FSL_BOOKE) += fsl_booke_mmu.o
diff --git a/arch/ppc/mm/fsl_booke_mmu.c b/arch/ppc/mm/fsl_booke_mmu.c
deleted file mode 100644
index 123da03..0000000
--- a/arch/ppc/mm/fsl_booke_mmu.c
+++ /dev/null
@@ -1,236 +0,0 @@
-/*
- * Modifications by Kumar Gala (galak@kernel.crashing.org) to support
- * E500 Book E processors.
- *
- * Copyright 2004 Freescale Semiconductor, Inc
- *
- * This file contains the routines for initializing the MMU
- * on the 4xx series of chips.
- * -- paulus
- *
- * Derived from arch/ppc/mm/init.c:
- * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
- * and Cort Dougan (PReP) (cort@cs.nmt.edu)
- * Copyright (C) 1996 Paul Mackerras
- * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
- *
- * Derived from "arch/i386/mm/init.c"
- * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/stddef.h>
-#include <linux/vmalloc.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/highmem.h>
-
-#include <asm/pgalloc.h>
-#include <asm/prom.h>
-#include <asm/io.h>
-#include <asm/mmu_context.h>
-#include <asm/pgtable.h>
-#include <asm/mmu.h>
-#include <asm/uaccess.h>
-#include <asm/smp.h>
-#include <asm/bootx.h>
-#include <asm/machdep.h>
-#include <asm/setup.h>
-
-extern void loadcam_entry(unsigned int index);
-unsigned int tlbcam_index;
-unsigned int num_tlbcam_entries;
-static unsigned long __cam0, __cam1, __cam2;
-extern unsigned long total_lowmem;
-extern unsigned long __max_low_memory;
-#define MAX_LOW_MEM CONFIG_LOWMEM_SIZE
-
-#define NUM_TLBCAMS (16)
-
-struct tlbcam {
- u32 MAS0;
- u32 MAS1;
- u32 MAS2;
- u32 MAS3;
- u32 MAS7;
-} TLBCAM[NUM_TLBCAMS];
-
-struct tlbcamrange {
- unsigned long start;
- unsigned long limit;
- phys_addr_t phys;
-} tlbcam_addrs[NUM_TLBCAMS];
-
-extern unsigned int tlbcam_index;
-
-/*
- * Return PA for this VA if it is mapped by a CAM, or 0
- */
-unsigned long v_mapped_by_tlbcam(unsigned long va)
-{
- int b;
- for (b = 0; b < tlbcam_index; ++b)
- if (va >= tlbcam_addrs[b].start && va < tlbcam_addrs[b].limit)
- return tlbcam_addrs[b].phys + (va - tlbcam_addrs[b].start);
- return 0;
-}
-
-/*
- * Return VA for a given PA or 0 if not mapped
- */
-unsigned long p_mapped_by_tlbcam(unsigned long pa)
-{
- int b;
- for (b = 0; b < tlbcam_index; ++b)
- if (pa >= tlbcam_addrs[b].phys
- && pa < (tlbcam_addrs[b].limit-tlbcam_addrs[b].start)
- +tlbcam_addrs[b].phys)
- return tlbcam_addrs[b].start+(pa-tlbcam_addrs[b].phys);
- return 0;
-}
-
-/*
- * Set up one of the I/D BAT (block address translation) register pairs.
- * The parameters are not checked; in particular size must be a power
- * of 4 between 4k and 256M.
- */
-void settlbcam(int index, unsigned long virt, phys_addr_t phys,
- unsigned int size, int flags, unsigned int pid)
-{
- unsigned int tsize, lz;
-
- asm ("cntlzw %0,%1" : "=r" (lz) : "r" (size));
- tsize = (21 - lz) / 2;
-
-#ifdef CONFIG_SMP
- if ((flags & _PAGE_NO_CACHE) == 0)
- flags |= _PAGE_COHERENT;
-#endif
-
- TLBCAM[index].MAS0 = MAS0_TLBSEL(1) | MAS0_ESEL(index) | MAS0_NV(index+1);
- TLBCAM[index].MAS1 = MAS1_VALID | MAS1_IPROT | MAS1_TSIZE(tsize) | MAS1_TID(pid);
- TLBCAM[index].MAS2 = virt & PAGE_MASK;
-
- TLBCAM[index].MAS2 |= (flags & _PAGE_WRITETHRU) ? MAS2_W : 0;
- TLBCAM[index].MAS2 |= (flags & _PAGE_NO_CACHE) ? MAS2_I : 0;
- TLBCAM[index].MAS2 |= (flags & _PAGE_COHERENT) ? MAS2_M : 0;
- TLBCAM[index].MAS2 |= (flags & _PAGE_GUARDED) ? MAS2_G : 0;
- TLBCAM[index].MAS2 |= (flags & _PAGE_ENDIAN) ? MAS2_E : 0;
-
- TLBCAM[index].MAS3 = (phys & PAGE_MASK) | MAS3_SX | MAS3_SR;
- TLBCAM[index].MAS3 |= ((flags & _PAGE_RW) ? MAS3_SW : 0);
-
-#ifndef CONFIG_KGDB /* want user access for breakpoints */
- if (flags & _PAGE_USER) {
- TLBCAM[index].MAS3 |= MAS3_UX | MAS3_UR;
- TLBCAM[index].MAS3 |= ((flags & _PAGE_RW) ? MAS3_UW : 0);
- }
-#else
- TLBCAM[index].MAS3 |= MAS3_UX | MAS3_UR;
- TLBCAM[index].MAS3 |= ((flags & _PAGE_RW) ? MAS3_UW : 0);
-#endif
-
- tlbcam_addrs[index].start = virt;
- tlbcam_addrs[index].limit = virt + size - 1;
- tlbcam_addrs[index].phys = phys;
-
- loadcam_entry(index);
-}
-
-void invalidate_tlbcam_entry(int index)
-{
- TLBCAM[index].MAS0 = MAS0_TLBSEL(1) | MAS0_ESEL(index);
- TLBCAM[index].MAS1 = ~MAS1_VALID;
-
- loadcam_entry(index);
-}
-
-void __init cam_mapin_ram(unsigned long cam0, unsigned long cam1,
- unsigned long cam2)
-{
- settlbcam(0, KERNELBASE, PPC_MEMSTART, cam0, _PAGE_KERNEL, 0);
- tlbcam_index++;
- if (cam1) {
- tlbcam_index++;
- settlbcam(1, KERNELBASE+cam0, PPC_MEMSTART+cam0, cam1, _PAGE_KERNEL, 0);
- }
- if (cam2) {
- tlbcam_index++;
- settlbcam(2, KERNELBASE+cam0+cam1, PPC_MEMSTART+cam0+cam1, cam2, _PAGE_KERNEL, 0);
- }
-}
-
-/*
- * MMU_init_hw does the chip-specific initialization of the MMU hardware.
- */
-void __init MMU_init_hw(void)
-{
- flush_instruction_cache();
-}
-
-unsigned long __init mmu_mapin_ram(void)
-{
- cam_mapin_ram(__cam0, __cam1, __cam2);
-
- return __cam0 + __cam1 + __cam2;
-}
-
-
-void __init
-adjust_total_lowmem(void)
-{
- unsigned long max_low_mem = MAX_LOW_MEM;
- unsigned long cam_max = 0x10000000;
- unsigned long ram;
-
- /* adjust CAM size to max_low_mem */
- if (max_low_mem < cam_max)
- cam_max = max_low_mem;
-
- /* adjust lowmem size to max_low_mem */
- if (max_low_mem < total_lowmem)
- ram = max_low_mem;
- else
- ram = total_lowmem;
-
- /* Calculate CAM values */
- __cam0 = 1UL << 2 * (__ilog2(ram) / 2);
- if (__cam0 > cam_max)
- __cam0 = cam_max;
- ram -= __cam0;
- if (ram) {
- __cam1 = 1UL << 2 * (__ilog2(ram) / 2);
- if (__cam1 > cam_max)
- __cam1 = cam_max;
- ram -= __cam1;
- }
- if (ram) {
- __cam2 = 1UL << 2 * (__ilog2(ram) / 2);
- if (__cam2 > cam_max)
- __cam2 = cam_max;
- ram -= __cam2;
- }
-
- printk(KERN_INFO "Memory CAM mapping: CAM0=%ldMb, CAM1=%ldMb,"
- " CAM2=%ldMb residual: %ldMb\n",
- __cam0 >> 20, __cam1 >> 20, __cam2 >> 20,
- (total_lowmem - __cam0 - __cam1 - __cam2) >> 20);
- __max_low_memory = max_low_mem = __cam0 + __cam1 + __cam2;
-}
diff --git a/arch/ppc/mm/init.c b/arch/ppc/mm/init.c
index dd898d3..7444df3 100644
--- a/arch/ppc/mm/init.c
+++ b/arch/ppc/mm/init.c
@@ -241,12 +241,6 @@ void __init MMU_init(void)
if (__max_memory && total_memory > __max_memory)
total_memory = __max_memory;
total_lowmem = total_memory;
-#ifdef CONFIG_FSL_BOOKE
- /* Freescale Book-E parts expect lowmem to be mapped by fixed TLB
- * entries, so we need to adjust lowmem to match the amount we can map
- * in the fixed entries */
- adjust_total_lowmem();
-#endif /* CONFIG_FSL_BOOKE */
if (total_lowmem > __max_low_memory) {
total_lowmem = __max_low_memory;
#ifndef CONFIG_HIGHMEM
diff --git a/arch/ppc/mm/mmu_decl.h b/arch/ppc/mm/mmu_decl.h
index b298b60..5f813e3 100644
--- a/arch/ppc/mm/mmu_decl.h
+++ b/arch/ppc/mm/mmu_decl.h
@@ -58,12 +58,6 @@ extern unsigned int num_tlbcam_entries;
extern void MMU_init_hw(void);
extern unsigned long mmu_mapin_ram(void);
-#elif defined(CONFIG_FSL_BOOKE)
-#define flush_HPTE(pid, va, pg) _tlbie(va, pid)
-extern void MMU_init_hw(void);
-extern unsigned long mmu_mapin_ram(void);
-extern void adjust_total_lowmem(void);
-
#else
/* anything except 4xx or 8xx */
extern void MMU_init_hw(void);
diff --git a/arch/ppc/mm/pgtable.c b/arch/ppc/mm/pgtable.c
index 1f51e6c..fadacfd 100644
--- a/arch/ppc/mm/pgtable.c
+++ b/arch/ppc/mm/pgtable.c
@@ -42,10 +42,6 @@ int io_bat_index;
#define HAVE_BATS 1
#endif
-#if defined(CONFIG_FSL_BOOKE)
-#define HAVE_TLBCAM 1
-#endif
-
extern char etext[], _stext[];
#ifdef CONFIG_SMP
@@ -63,15 +59,6 @@ void setbat(int index, unsigned long virt, unsigned long phys,
#define p_mapped_by_bats(x) (0UL)
#endif /* HAVE_BATS */
-#ifdef HAVE_TLBCAM
-extern unsigned int tlbcam_index;
-extern unsigned long v_mapped_by_tlbcam(unsigned long va);
-extern unsigned long p_mapped_by_tlbcam(unsigned long pa);
-#else /* !HAVE_TLBCAM */
-#define v_mapped_by_tlbcam(x) (0UL)
-#define p_mapped_by_tlbcam(x) (0UL)
-#endif /* HAVE_TLBCAM */
-
#ifdef CONFIG_PTE_64BIT
/* 44x uses an 8kB pgdir because it has 8-byte Linux PTEs. */
#define PGDIR_ORDER 1
@@ -213,9 +200,6 @@ __ioremap(phys_addr_t addr, unsigned long size, unsigned long flags)
if ((v = p_mapped_by_bats(p)) /*&& p_mapped_by_bats(p+size-1)*/ )
goto out;
- if ((v = p_mapped_by_tlbcam(p)))
- goto out;
-
if (mem_init_done) {
struct vm_struct *area;
area = get_vm_area(size, VM_IOREMAP);
@@ -341,18 +325,6 @@ void __init io_block_mapping(unsigned long virt, phys_addr_t phys,
}
#endif /* HAVE_BATS */
-#ifdef HAVE_TLBCAM
- /*
- * Use a CAM for this if possible...
- */
- if (tlbcam_index < num_tlbcam_entries && is_power_of_4(size)
- && (virt & (size - 1)) == 0 && (phys & (size - 1)) == 0) {
- settlbcam(tlbcam_index, virt, phys, size, flags, 0);
- ++tlbcam_index;
- return;
- }
-#endif /* HAVE_TLBCAM */
-
/* No BATs available, put it in the page tables. */
for (i = 0; i < size; i += PAGE_SIZE)
map_page(virt + i, phys + i, flags);
diff --git a/arch/ppc/platforms/85xx/Kconfig b/arch/ppc/platforms/85xx/Kconfig
deleted file mode 100644
index 6f2d0ad..0000000
--- a/arch/ppc/platforms/85xx/Kconfig
+++ /dev/null
@@ -1,106 +0,0 @@
-config 85xx
- bool
- depends on E500
- default y
-
-config PPC_INDIRECT_PCI_BE
- bool
- depends on 85xx
- default y
-
-menu "Freescale 85xx options"
- depends on E500
-
-choice
- prompt "Machine Type"
- depends on 85xx
- default MPC8540_ADS
-
-config MPC8540_ADS
- bool "Freescale MPC8540 ADS"
- help
- This option enables support for the MPC 8540 ADS evaluation board.
-
-config MPC8548_CDS
- bool "Freescale MPC8548 CDS"
- help
- This option enables support for the MPC8548 CDS evaluation board.
-
-config MPC8555_CDS
- bool "Freescale MPC8555 CDS"
- help
- This option enables support for the MPC8555 CDS evaluation board.
-
-config MPC8560_ADS
- bool "Freescale MPC8560 ADS"
- help
- This option enables support for the MPC 8560 ADS evaluation board.
-
-config SBC8560
- bool "WindRiver PowerQUICC III SBC8560"
- help
- This option enables support for the WindRiver PowerQUICC III
- SBC8560 board.
-
-config STX_GP3
- bool "Silicon Turnkey Express GP3"
- help
- This option enables support for the Silicon Turnkey Express GP3
- board.
-
-config TQM8540
- bool "TQ Components TQM8540"
- help
- This option enables support for the TQ Components TQM8540 board.
-
-config TQM8541
- bool "TQ Components TQM8541"
- help
- This option enables support for the TQ Components TQM8541 board.
-
-config TQM8555
- bool "TQ Components TQM8555"
- help
- This option enables support for the TQ Components TQM8555 board.
-
-config TQM8560
- bool "TQ Components TQM8560"
- help
- This option enables support for the TQ Components TQM8560 board.
-
-endchoice
-
-# It's often necessary to know the specific 85xx processor type.
-# Fortunately, it is implied (so far) from the board type, so we
-# don't need to ask more redundant questions.
-config MPC8540
- bool
- depends on MPC8540_ADS || TQM8540
- default y
-
-config MPC8548
- bool
- depends on MPC8548_CDS
- default y
-
-config MPC8555
- bool
- depends on MPC8555_CDS || TQM8541 || TQM8555
- default y
-
-config MPC8560
- bool
- depends on SBC8560 || MPC8560_ADS || STX_GP3 || TQM8560
- default y
-
-config 85xx_PCI2
- bool "Support for 2nd PCI host controller"
- depends on MPC8555_CDS
- default y
-
-config PPC_GEN550
- bool
- depends on MPC8540 || SBC8560 || MPC8555
- default y
-
-endmenu
diff --git a/arch/ppc/platforms/85xx/Makefile b/arch/ppc/platforms/85xx/Makefile
deleted file mode 100644
index 6c4753c..0000000
--- a/arch/ppc/platforms/85xx/Makefile
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# Makefile for the PowerPC 85xx linux kernel.
-#
-obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads_common.o mpc8540_ads.o
-obj-$(CONFIG_MPC8548_CDS) += mpc85xx_cds_common.o
-obj-$(CONFIG_MPC8555_CDS) += mpc85xx_cds_common.o
-obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads_common.o mpc8560_ads.o
-obj-$(CONFIG_SBC8560) += sbc85xx.o sbc8560.o
-obj-$(CONFIG_STX_GP3) += stx_gp3.o
-obj-$(CONFIG_TQM8540) += tqm85xx.o
-obj-$(CONFIG_TQM8541) += tqm85xx.o
-obj-$(CONFIG_TQM8555) += tqm85xx.o
-obj-$(CONFIG_TQM8560) += tqm85xx.o
diff --git a/arch/ppc/platforms/85xx/mpc8540_ads.c b/arch/ppc/platforms/85xx/mpc8540_ads.c
deleted file mode 100644
index 00a3ba5..0000000
--- a/arch/ppc/platforms/85xx/mpc8540_ads.c
+++ /dev/null
@@ -1,226 +0,0 @@
-/*
- * MPC8540ADS board specific routines
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * Copyright 2004 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/major.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/serial.h>
-#include <linux/tty.h> /* for linux/serial_core.h */
-#include <linux/serial_core.h>
-#include <linux/initrd.h>
-#include <linux/module.h>
-#include <linux/fsl_devices.h>
-
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/atomic.h>
-#include <asm/time.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/open_pic.h>
-#include <asm/bootinfo.h>
-#include <asm/pci-bridge.h>
-#include <asm/mpc85xx.h>
-#include <asm/irq.h>
-#include <asm/immap_85xx.h>
-#include <asm/kgdb.h>
-#include <asm/ppc_sys.h>
-#include <mm/mmu_decl.h>
-
-#include <syslib/ppc85xx_setup.h>
-
-/* ************************************************************************
- *
- * Setup the architecture
- *
- */
-static void __init
-mpc8540ads_setup_arch(void)
-{
- bd_t *binfo = (bd_t *) __res;
- unsigned int freq;
- struct gianfar_platform_data *pdata;
- struct gianfar_mdio_data *mdata;
-
- /* get the core frequency */
- freq = binfo->bi_intfreq;
-
- if (ppc_md.progress)
- ppc_md.progress("mpc8540ads_setup_arch()", 0);
-
- /* Set loops_per_jiffy to a half-way reasonable value,
- for use until calibrate_delay gets called. */
- loops_per_jiffy = freq / HZ;
-
-#ifdef CONFIG_PCI
- /* setup PCI host bridges */
- mpc85xx_setup_hose();
-#endif
-
-#ifdef CONFIG_SERIAL_8250
- mpc85xx_early_serial_map();
-#endif
-
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
- /* Invalidate the entry we stole earlier the serial ports
- * should be properly mapped */
- invalidate_tlbcam_entry(num_tlbcam_entries - 1);
-#endif
-
- /* setup the board related info for the MDIO bus */
- mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO);
-
- mdata->irq[0] = MPC85xx_IRQ_EXT5;
- mdata->irq[1] = MPC85xx_IRQ_EXT5;
- mdata->irq[2] = PHY_POLL;
- mdata->irq[3] = MPC85xx_IRQ_EXT5;
- mdata->irq[31] = PHY_POLL;
-
- /* setup the board related information for the enet controllers */
- pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1);
- if (pdata) {
- pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
- pdata->bus_id = 0;
- pdata->phy_id = 0;
- memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
- }
-
- pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2);
- if (pdata) {
- pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
- pdata->bus_id = 0;
- pdata->phy_id = 1;
- memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
- }
-
- pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_FEC);
- if (pdata) {
- pdata->board_flags = 0;
- pdata->bus_id = 0;
- pdata->phy_id = 3;
- memcpy(pdata->mac_addr, binfo->bi_enet2addr, 6);
- }
-
-#ifdef CONFIG_BLK_DEV_INITRD
- if (initrd_start)
- ROOT_DEV = Root_RAM0;
- else
-#endif
-#ifdef CONFIG_ROOT_NFS
- ROOT_DEV = Root_NFS;
-#else
- ROOT_DEV = Root_HDA1;
-#endif
-}
-
-/* ************************************************************************ */
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
- unsigned long r6, unsigned long r7)
-{
- /* parse_bootinfo must always be called first */
- parse_bootinfo(find_bootinfo());
-
- /*
- * If we were passed in a board information, copy it into the
- * residual data area.
- */
- if (r3) {
- memcpy((void *) __res, (void *) (r3 + KERNELBASE),
- sizeof (bd_t));
- }
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
- {
- bd_t *binfo = (bd_t *) __res;
- struct uart_port p;
-
- /* Use the last TLB entry to map CCSRBAR to allow access to DUART regs */
- settlbcam(num_tlbcam_entries - 1, binfo->bi_immr_base,
- binfo->bi_immr_base, MPC85xx_CCSRBAR_SIZE, _PAGE_IO, 0);
-
- memset(&p, 0, sizeof (p));
- p.iotype = UPIO_MEM;
- p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART0_OFFSET;
- p.uartclk = binfo->bi_busfreq;
-
- gen550_init(0, &p);
-
- memset(&p, 0, sizeof (p));
- p.iotype = UPIO_MEM;
- p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART1_OFFSET;
- p.uartclk = binfo->bi_busfreq;
-
- gen550_init(1, &p);
- }
-#endif
-
-#if defined(CONFIG_BLK_DEV_INITRD)
- /*
- * If the init RAM disk has been configured in, and there's a valid
- * starting address for it, set it up.
- */
- if (r4) {
- initrd_start = r4 + KERNELBASE;
- initrd_end = r5 + KERNELBASE;
- }
-#endif /* CONFIG_BLK_DEV_INITRD */
-
- /* Copy the kernel command line arguments to a safe place. */
-
- if (r6) {
- *(char *) (r7 + KERNELBASE) = 0;
- strcpy(cmd_line, (char *) (r6 + KERNELBASE));
- }
-
- identify_ppc_sys_by_id(mfspr(SPRN_SVR));
-
- /* setup the PowerPC module struct */
- ppc_md.setup_arch = mpc8540ads_setup_arch;
- ppc_md.show_cpuinfo = mpc85xx_ads_show_cpuinfo;
-
- ppc_md.init_IRQ = mpc85xx_ads_init_IRQ;
- ppc_md.get_irq = openpic_get_irq;
-
- ppc_md.restart = mpc85xx_restart;
- ppc_md.power_off = mpc85xx_power_off;
- ppc_md.halt = mpc85xx_halt;
-
- ppc_md.find_end_of_memory = mpc85xx_find_end_of_memory;
-
- ppc_md.time_init = NULL;
- ppc_md.set_rtc_time = NULL;
- ppc_md.get_rtc_time = NULL;
- ppc_md.calibrate_decr = mpc85xx_calibrate_decr;
-
-#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG)
- ppc_md.progress = gen550_progress;
-#endif /* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */
-#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_KGDB)
- ppc_md.early_serial_map = mpc85xx_early_serial_map;
-#endif /* CONFIG_SERIAL_8250 && CONFIG_KGDB */
-
- if (ppc_md.progress)
- ppc_md.progress("mpc8540ads_init(): exit", 0);
-
- return;
-}
diff --git a/arch/ppc/platforms/85xx/mpc8540_ads.h b/arch/ppc/platforms/85xx/mpc8540_ads.h
deleted file mode 100644
index 7559f9e..0000000
--- a/arch/ppc/platforms/85xx/mpc8540_ads.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * MPC8540ADS board definitions
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * Copyright 2004 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-#ifndef __MACH_MPC8540ADS_H__
-#define __MACH_MPC8540ADS_H__
-
-#include <linux/initrd.h>
-#include <syslib/ppc85xx_setup.h>
-#include <platforms/85xx/mpc85xx_ads_common.h>
-
-#endif /* __MACH_MPC8540ADS_H__ */
diff --git a/arch/ppc/platforms/85xx/mpc8555_cds.h b/arch/ppc/platforms/85xx/mpc8555_cds.h
deleted file mode 100644
index 4f79c37..0000000
--- a/arch/ppc/platforms/85xx/mpc8555_cds.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * MPC8555CDS board definitions
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * Copyright 2004 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-#ifndef __MACH_MPC8555CDS_H__
-#define __MACH_MPC8555CDS_H__
-
-#include <syslib/ppc85xx_setup.h>
-#include <platforms/85xx/mpc85xx_cds_common.h>
-
-#define CPM_MAP_ADDR (CCSRBAR + MPC85xx_CPM_OFFSET)
-
-#endif /* __MACH_MPC8555CDS_H__ */
diff --git a/arch/ppc/platforms/85xx/mpc8560_ads.c b/arch/ppc/platforms/85xx/mpc8560_ads.c
deleted file mode 100644
index 3a06046..0000000
--- a/arch/ppc/platforms/85xx/mpc8560_ads.c
+++ /dev/null
@@ -1,303 +0,0 @@
-/*
- * MPC8560ADS board specific routines
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * Copyright 2004 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/major.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/serial.h>
-#include <linux/tty.h> /* for linux/serial_core.h */
-#include <linux/serial_core.h>
-#include <linux/initrd.h>
-#include <linux/module.h>
-#include <linux/fsl_devices.h>
-#include <linux/fs_enet_pd.h>
-
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/atomic.h>
-#include <asm/time.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/open_pic.h>
-#include <asm/bootinfo.h>
-#include <asm/pci-bridge.h>
-#include <asm/mpc85xx.h>
-#include <asm/irq.h>
-#include <asm/immap_85xx.h>
-#include <asm/kgdb.h>
-#include <asm/ppc_sys.h>
-#include <asm/cpm2.h>
-#include <mm/mmu_decl.h>
-
-#include <syslib/cpm2_pic.h>
-#include <syslib/ppc85xx_common.h>
-#include <syslib/ppc85xx_setup.h>
-
-
-/* ************************************************************************
- *
- * Setup the architecture
- *
- */
-static void init_fcc_ioports(void)
-{
- struct immap *immap;
- struct io_port *io;
- u32 tempval;
-
- immap = cpm2_immr;
-
- io = &immap->im_ioport;
- /* FCC2/3 are on the ports B/C. */
- tempval = in_be32(&io->iop_pdirb);
- tempval &= ~PB2_DIRB0;
- tempval |= PB2_DIRB1;
- out_be32(&io->iop_pdirb, tempval);
-
- tempval = in_be32(&io->iop_psorb);
- tempval &= ~PB2_PSORB0;
- tempval |= PB2_PSORB1;
- out_be32(&io->iop_psorb, tempval);
-
- tempval = in_be32(&io->iop_pparb);
- tempval |= (PB2_DIRB0 | PB2_DIRB1);
- out_be32(&io->iop_pparb, tempval);
-
- tempval = in_be32(&io->iop_pdirb);
- tempval &= ~PB3_DIRB0;
- tempval |= PB3_DIRB1;
- out_be32(&io->iop_pdirb, tempval);
-
- tempval = in_be32(&io->iop_psorb);
- tempval &= ~PB3_PSORB0;
- tempval |= PB3_PSORB1;
- out_be32(&io->iop_psorb, tempval);
-
- tempval = in_be32(&io->iop_pparb);
- tempval |= (PB3_DIRB0 | PB3_DIRB1);
- out_be32(&io->iop_pparb, tempval);
-
- tempval = in_be32(&io->iop_pdirc);
- tempval |= PC3_DIRC1;
- out_be32(&io->iop_pdirc, tempval);
-
- tempval = in_be32(&io->iop_pparc);
- tempval |= PC3_DIRC1;
- out_be32(&io->iop_pparc, tempval);
-
- /* Port C has clocks...... */
- tempval = in_be32(&io->iop_psorc);
- tempval &= ~(CLK_TRX);
- out_be32(&io->iop_psorc, tempval);
-
- tempval = in_be32(&io->iop_pdirc);
- tempval &= ~(CLK_TRX);
- out_be32(&io->iop_pdirc, tempval);
- tempval = in_be32(&io->iop_pparc);
- tempval |= (CLK_TRX);
- out_be32(&io->iop_pparc, tempval);
-
- /* Configure Serial Interface clock routing.
- * First, clear all FCC bits to zero,
- * then set the ones we want.
- */
- immap->im_cpmux.cmx_fcr &= ~(CPMUX_CLK_MASK);
- immap->im_cpmux.cmx_fcr |= CPMUX_CLK_ROUTE;
-}
-
-static void __init
-mpc8560ads_setup_arch(void)
-{
- bd_t *binfo = (bd_t *) __res;
- unsigned int freq;
- struct gianfar_platform_data *pdata;
- struct gianfar_mdio_data *mdata;
- struct fs_platform_info *fpi;
-
- cpm2_reset();
-
- /* get the core frequency */
- freq = binfo->bi_intfreq;
-
- if (ppc_md.progress)
- ppc_md.progress("mpc8560ads_setup_arch()", 0);
-
- /* Set loops_per_jiffy to a half-way reasonable value,
- for use until calibrate_delay gets called. */
- loops_per_jiffy = freq / HZ;
-
-#ifdef CONFIG_PCI
- /* setup PCI host bridges */
- mpc85xx_setup_hose();
-#endif
-
- /* setup the board related info for the MDIO bus */
- mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO);
-
- mdata->irq[0] = MPC85xx_IRQ_EXT5;
- mdata->irq[1] = MPC85xx_IRQ_EXT5;
- mdata->irq[2] = PHY_POLL;
- mdata->irq[3] = MPC85xx_IRQ_EXT5;
- mdata->irq[31] = PHY_POLL;
-
- /* setup the board related information for the enet controllers */
- pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1);
- if (pdata) {
- pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
- pdata->bus_id = 0;
- pdata->phy_id = 0;
- memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
- }
-
- pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2);
- if (pdata) {
- pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
- pdata->bus_id = 0;
- pdata->phy_id = 1;
- memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
- }
-
- init_fcc_ioports();
- ppc_sys_device_remove(MPC85xx_CPM_FCC1);
-
- fpi = (struct fs_platform_info *) ppc_sys_get_pdata(MPC85xx_CPM_FCC2);
- if (fpi) {
- memcpy(fpi->macaddr, binfo->bi_enet2addr, 6);
- fpi->bus_id = "0:02";
- fpi->phy_addr = 2;
- fpi->dpram_offset = (u32)cpm2_immr->im_dprambase;
- fpi->fcc_regs_c = (u32)&cpm2_immr->im_fcc_c[1];
- }
-
- fpi = (struct fs_platform_info *) ppc_sys_get_pdata(MPC85xx_CPM_FCC3);
- if (fpi) {
- memcpy(fpi->macaddr, binfo->bi_enet2addr, 6);
- fpi->macaddr[5] += 1;
- fpi->bus_id = "0:03";
- fpi->phy_addr = 3;
- fpi->dpram_offset = (u32)cpm2_immr->im_dprambase;
- fpi->fcc_regs_c = (u32)&cpm2_immr->im_fcc_c[2];
- }
-
-#ifdef CONFIG_BLK_DEV_INITRD
- if (initrd_start)
- ROOT_DEV = Root_RAM0;
- else
-#endif
-#ifdef CONFIG_ROOT_NFS
- ROOT_DEV = Root_NFS;
-#else
- ROOT_DEV = Root_HDA1;
-#endif
-}
-
-static irqreturn_t cpm2_cascade(int irq, void *dev_id)
-{
- while ((irq = cpm2_get_irq()) >= 0)
- __do_IRQ(irq);
- return IRQ_HANDLED;
-}
-
-static struct irqaction cpm2_irqaction = {
- .handler = cpm2_cascade,
- .flags = IRQF_DISABLED,
- .mask = CPU_MASK_NONE,
- .name = "cpm2_cascade",
-};
-
-static void __init
-mpc8560_ads_init_IRQ(void)
-{
- /* Setup OpenPIC */
- mpc85xx_ads_init_IRQ();
-
- /* Setup CPM2 PIC */
- cpm2_init_IRQ();
-
- setup_irq(MPC85xx_IRQ_CPM, &cpm2_irqaction);
-
- return;
-}
-
-
-
-/* ************************************************************************ */
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
- unsigned long r6, unsigned long r7)
-{
- /* parse_bootinfo must always be called first */
- parse_bootinfo(find_bootinfo());
-
- /*
- * If we were passed in a board information, copy it into the
- * residual data area.
- */
- if (r3) {
- memcpy((void *) __res, (void *) (r3 + KERNELBASE),
- sizeof (bd_t));
-
- }
-#if defined(CONFIG_BLK_DEV_INITRD)
- /*
- * If the init RAM disk has been configured in, and there's a valid
- * starting address for it, set it up.
- */
- if (r4) {
- initrd_start = r4 + KERNELBASE;
- initrd_end = r5 + KERNELBASE;
- }
-#endif /* CONFIG_BLK_DEV_INITRD */
-
- /* Copy the kernel command line arguments to a safe place. */
-
- if (r6) {
- *(char *) (r7 + KERNELBASE) = 0;
- strcpy(cmd_line, (char *) (r6 + KERNELBASE));
- }
-
- identify_ppc_sys_by_id(mfspr(SPRN_SVR));
-
- /* setup the PowerPC module struct */
- ppc_md.setup_arch = mpc8560ads_setup_arch;
- ppc_md.show_cpuinfo = mpc85xx_ads_show_cpuinfo;
-
- ppc_md.init_IRQ = mpc8560_ads_init_IRQ;
- ppc_md.get_irq = openpic_get_irq;
-
- ppc_md.restart = mpc85xx_restart;
- ppc_md.power_off = mpc85xx_power_off;
- ppc_md.halt = mpc85xx_halt;
-
- ppc_md.find_end_of_memory = mpc85xx_find_end_of_memory;
-
- ppc_md.time_init = NULL;
- ppc_md.set_rtc_time = NULL;
- ppc_md.get_rtc_time = NULL;
- ppc_md.calibrate_decr = mpc85xx_calibrate_decr;
-
- if (ppc_md.progress)
- ppc_md.progress("mpc8560ads_init(): exit", 0);
-
- return;
-}
diff --git a/arch/ppc/platforms/85xx/mpc8560_ads.h b/arch/ppc/platforms/85xx/mpc8560_ads.h
deleted file mode 100644
index 9f185ab..0000000
--- a/arch/ppc/platforms/85xx/mpc8560_ads.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * MPC8540ADS board definitions
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * Copyright 2004 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-#ifndef __MACH_MPC8560ADS_H
-#define __MACH_MPC8560ADS_H
-
-#include <syslib/ppc85xx_setup.h>
-#include <platforms/85xx/mpc85xx_ads_common.h>
-
-#define CPM_MAP_ADDR (CCSRBAR + MPC85xx_CPM_OFFSET)
-#define PHY_INTERRUPT MPC85xx_IRQ_EXT7
-
-#endif /* __MACH_MPC8560ADS_H */
diff --git a/arch/ppc/platforms/85xx/mpc85xx_ads_common.c b/arch/ppc/platforms/85xx/mpc85xx_ads_common.c
deleted file mode 100644
index 0706dca..0000000
--- a/arch/ppc/platforms/85xx/mpc85xx_ads_common.c
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- * MPC85xx ADS board common routines
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * Copyright 2004 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/major.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/serial.h>
-#include <linux/module.h>
-
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/atomic.h>
-#include <asm/time.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/open_pic.h>
-#include <asm/bootinfo.h>
-#include <asm/pci-bridge.h>
-#include <asm/mpc85xx.h>
-#include <asm/irq.h>
-#include <asm/immap_85xx.h>
-#include <asm/ppc_sys.h>
-
-#include <mm/mmu_decl.h>
-
-#include <platforms/85xx/mpc85xx_ads_common.h>
-
-#ifndef CONFIG_PCI
-unsigned long isa_io_base = 0;
-unsigned long isa_mem_base = 0;
-#endif
-
-extern unsigned long total_memory; /* in mm/init */
-
-unsigned char __res[sizeof (bd_t)];
-
-/* Internal interrupts are all Level Sensitive, and Positive Polarity */
-static u_char mpc85xx_ads_openpic_initsenses[] __initdata = {
- MPC85XX_INTERNAL_IRQ_SENSES,
- 0x0, /* External 0: */
-#if defined(CONFIG_PCI)
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 1: PCI slot 0 */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 2: PCI slot 1 */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 3: PCI slot 2 */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 4: PCI slot 3 */
-#else
- 0x0, /* External 1: */
- 0x0, /* External 2: */
- 0x0, /* External 3: */
- 0x0, /* External 4: */
-#endif
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 5: PHY */
- 0x0, /* External 6: */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 7: PHY */
- 0x0, /* External 8: */
- 0x0, /* External 9: */
- 0x0, /* External 10: */
- 0x0, /* External 11: */
-};
-
-/* ************************************************************************ */
-int
-mpc85xx_ads_show_cpuinfo(struct seq_file *m)
-{
- uint pvid, svid, phid1;
- uint memsize = total_memory;
- bd_t *binfo = (bd_t *) __res;
- unsigned int freq;
-
- /* get the core frequency */
- freq = binfo->bi_intfreq;
-
- pvid = mfspr(SPRN_PVR);
- svid = mfspr(SPRN_SVR);
-
- seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n");
- seq_printf(m, "Machine\t\t: mpc%sads\n", cur_ppc_sys_spec->ppc_sys_name);
- seq_printf(m, "clock\t\t: %dMHz\n", freq / 1000000);
- seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
- seq_printf(m, "SVR\t\t: 0x%x\n", svid);
-
- /* Display cpu Pll setting */
- phid1 = mfspr(SPRN_HID1);
- seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
-
- /* Display the amount of memory */
- seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
-
- return 0;
-}
-
-void __init
-mpc85xx_ads_init_IRQ(void)
-{
- bd_t *binfo = (bd_t *) __res;
- /* Determine the Physical Address of the OpenPIC regs */
- phys_addr_t OpenPIC_PAddr =
- binfo->bi_immr_base + MPC85xx_OPENPIC_OFFSET;
- OpenPIC_Addr = ioremap(OpenPIC_PAddr, MPC85xx_OPENPIC_SIZE);
- OpenPIC_InitSenses = mpc85xx_ads_openpic_initsenses;
- OpenPIC_NumInitSenses = sizeof (mpc85xx_ads_openpic_initsenses);
-
- /* Skip reserved space and internal sources */
- openpic_set_sources(0, 32, OpenPIC_Addr + 0x10200);
- /* Map PIC IRQs 0-11 */
- openpic_set_sources(48, 12, OpenPIC_Addr + 0x10000);
-
- /* we let openpic interrupts starting from an offset, to
- * leave space for cascading interrupts underneath.
- */
- openpic_init(MPC85xx_OPENPIC_IRQ_OFFSET);
-
- return;
-}
-
-#ifdef CONFIG_PCI
-/*
- * interrupt routing
- */
-
-int
-mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
- static char pci_irq_table[][4] =
- /*
- * This is little evil, but works around the fact
- * that revA boards have IDSEL starting at 18
- * and others boards (older) start at 12
- *
- * PCI IDSEL/INTPIN->INTLINE
- * A B C D
- */
- {
- {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 2 */
- {PIRQD, PIRQA, PIRQB, PIRQC},
- {PIRQC, PIRQD, PIRQA, PIRQB},
- {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 5 */
- {0, 0, 0, 0}, /* -- */
- {0, 0, 0, 0}, /* -- */
- {0, 0, 0, 0}, /* -- */
- {0, 0, 0, 0}, /* -- */
- {0, 0, 0, 0}, /* -- */
- {0, 0, 0, 0}, /* -- */
- {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 12 */
- {PIRQD, PIRQA, PIRQB, PIRQC},
- {PIRQC, PIRQD, PIRQA, PIRQB},
- {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 15 */
- {0, 0, 0, 0}, /* -- */
- {0, 0, 0, 0}, /* -- */
- {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 18 */
- {PIRQD, PIRQA, PIRQB, PIRQC},
- {PIRQC, PIRQD, PIRQA, PIRQB},
- {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 21 */
- };
-
- const long min_idsel = 2, max_idsel = 21, irqs_per_slot = 4;
- return PCI_IRQ_TABLE_LOOKUP;
-}
-
-int
-mpc85xx_exclude_device(u_char bus, u_char devfn)
-{
- if (bus == 0 && PCI_SLOT(devfn) == 0)
- return PCIBIOS_DEVICE_NOT_FOUND;
- else
- return PCIBIOS_SUCCESSFUL;
-}
-
-#endif /* CONFIG_PCI */
-
-#ifdef CONFIG_RAPIDIO
-extern void mpc85xx_rio_setup(int law_start, int law_size);
-void platform_rio_init(void)
-{
- /* 512MB RIO LAW at 0xc0000000 */
- mpc85xx_rio_setup(0xc0000000, 0x20000000);
-}
-#endif /* CONFIG_RAPIDIO */
diff --git a/arch/ppc/platforms/85xx/mpc85xx_ads_common.h b/arch/ppc/platforms/85xx/mpc85xx_ads_common.h
deleted file mode 100644
index c8c322f..0000000
--- a/arch/ppc/platforms/85xx/mpc85xx_ads_common.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * MPC85XX ADS common board definitions
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * Copyright 2004 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-#ifndef __MACH_MPC85XX_ADS_H__
-#define __MACH_MPC85XX_ADS_H__
-
-#include <linux/init.h>
-#include <asm/ppcboot.h>
-
-#define BOARD_CCSRBAR ((uint)0xe0000000)
-#define BCSR_ADDR ((uint)0xf8000000)
-#define BCSR_SIZE ((uint)(32 * 1024))
-
-struct seq_file;
-
-extern int mpc85xx_ads_show_cpuinfo(struct seq_file *m);
-extern void mpc85xx_ads_init_IRQ(void) __init;
-extern void mpc85xx_ads_map_io(void) __init;
-
-/* PCI interrupt controller */
-#define PIRQA MPC85xx_IRQ_EXT1
-#define PIRQB MPC85xx_IRQ_EXT2
-#define PIRQC MPC85xx_IRQ_EXT3
-#define PIRQD MPC85xx_IRQ_EXT4
-
-#define MPC85XX_PCI1_LOWER_IO 0x00000000
-#define MPC85XX_PCI1_UPPER_IO 0x00ffffff
-
-#define MPC85XX_PCI1_LOWER_MEM 0x80000000
-#define MPC85XX_PCI1_UPPER_MEM 0x9fffffff
-
-#define MPC85XX_PCI1_IO_BASE 0xe2000000
-#define MPC85XX_PCI1_MEM_OFFSET 0x00000000
-
-#define MPC85XX_PCI1_IO_SIZE 0x01000000
-
-/* FCC1 Clock Source Configuration. These can be
- * redefined in the board specific file.
- * Can only choose from CLK9-12 */
-#define F1_RXCLK 12
-#define F1_TXCLK 11
-
-/* FCC2 Clock Source Configuration. These can be
- * redefined in the board specific file.
- * Can only choose from CLK13-16 */
-#define F2_RXCLK 13
-#define F2_TXCLK 14
-
-/* FCC3 Clock Source Configuration. These can be
- * redefined in the board specific file.
- * Can only choose from CLK13-16 */
-#define F3_RXCLK 15
-#define F3_TXCLK 16
-
-
-#endif /* __MACH_MPC85XX_ADS_H__ */
diff --git a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c
deleted file mode 100644
index 2d59eb7..0000000
--- a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c
+++ /dev/null
@@ -1,601 +0,0 @@
-/*
- * MPC85xx CDS board specific routines
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * Copyright 2004 Freescale Semiconductor, Inc
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/major.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/serial.h>
-#include <linux/module.h>
-#include <linux/root_dev.h>
-#include <linux/initrd.h>
-#include <linux/tty.h>
-#include <linux/serial_core.h>
-#include <linux/fsl_devices.h>
-
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/atomic.h>
-#include <asm/time.h>
-#include <asm/todc.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/open_pic.h>
-#include <asm/i8259.h>
-#include <asm/bootinfo.h>
-#include <asm/pci-bridge.h>
-#include <asm/mpc85xx.h>
-#include <asm/irq.h>
-#include <asm/immap_85xx.h>
-#include <asm/cpm2.h>
-#include <asm/ppc_sys.h>
-#include <asm/kgdb.h>
-
-#include <mm/mmu_decl.h>
-#include <syslib/cpm2_pic.h>
-#include <syslib/ppc85xx_common.h>
-#include <syslib/ppc85xx_setup.h>
-
-
-#ifndef CONFIG_PCI
-unsigned long isa_io_base = 0;
-unsigned long isa_mem_base = 0;
-#endif
-
-extern unsigned long total_memory; /* in mm/init */
-
-unsigned char __res[sizeof (bd_t)];
-
-static int cds_pci_slot = 2;
-static volatile u8 * cadmus;
-
-/* Internal interrupts are all Level Sensitive, and Positive Polarity */
-static u_char mpc85xx_cds_openpic_initsenses[] __initdata = {
- MPC85XX_INTERNAL_IRQ_SENSES,
-#if defined(CONFIG_PCI)
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 0: PCI1 slot */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 1: PCI1 slot */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 2: PCI1 slot */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 3: PCI1 slot */
-#else
- 0x0, /* External 0: */
- 0x0, /* External 1: */
- 0x0, /* External 2: */
- 0x0, /* External 3: */
-#endif
- 0x0, /* External 4: */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 5: PHY */
- 0x0, /* External 6: */
- 0x0, /* External 7: */
- 0x0, /* External 8: */
- 0x0, /* External 9: */
- 0x0, /* External 10: */
-#if defined(CONFIG_85xx_PCI2) && defined(CONFIG_PCI)
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 11: PCI2 slot 0 */
-#else
- 0x0, /* External 11: */
-#endif
-};
-
-/* ************************************************************************ */
-int
-mpc85xx_cds_show_cpuinfo(struct seq_file *m)
-{
- uint pvid, svid, phid1;
- uint memsize = total_memory;
- bd_t *binfo = (bd_t *) __res;
- unsigned int freq;
-
- /* get the core frequency */
- freq = binfo->bi_intfreq;
-
- pvid = mfspr(SPRN_PVR);
- svid = mfspr(SPRN_SVR);
-
- seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n");
- seq_printf(m, "Machine\t\t: CDS - MPC%s (%x)\n", cur_ppc_sys_spec->ppc_sys_name, cadmus[CM_VER]);
- seq_printf(m, "clock\t\t: %dMHz\n", freq / 1000000);
- seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
- seq_printf(m, "SVR\t\t: 0x%x\n", svid);
-
- /* Display cpu Pll setting */
- phid1 = mfspr(SPRN_HID1);
- seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
-
- /* Display the amount of memory */
- seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
-
- return 0;
-}
-
-#ifdef CONFIG_CPM2
-static irqreturn_t cpm2_cascade(int irq, void *dev_id)
-{
- while((irq = cpm2_get_irq()) >= 0)
- __do_IRQ(irq);
- return IRQ_HANDLED;
-}
-
-static struct irqaction cpm2_irqaction = {
- .handler = cpm2_cascade,
- .flags = IRQF_DISABLED,
- .mask = CPU_MASK_NONE,
- .name = "cpm2_cascade",
-};
-#endif /* CONFIG_CPM2 */
-
-void __init
-mpc85xx_cds_init_IRQ(void)
-{
- bd_t *binfo = (bd_t *) __res;
- int i;
-
- /* Determine the Physical Address of the OpenPIC regs */
- phys_addr_t OpenPIC_PAddr = binfo->bi_immr_base + MPC85xx_OPENPIC_OFFSET;
- OpenPIC_Addr = ioremap(OpenPIC_PAddr, MPC85xx_OPENPIC_SIZE);
- OpenPIC_InitSenses = mpc85xx_cds_openpic_initsenses;
- OpenPIC_NumInitSenses = sizeof (mpc85xx_cds_openpic_initsenses);
-
- /* Skip reserved space and internal sources */
-#ifdef CONFIG_MPC8548
- openpic_set_sources(0, 48, OpenPIC_Addr + 0x10200);
-#else
- openpic_set_sources(0, 32, OpenPIC_Addr + 0x10200);
-#endif
- /* Map PIC IRQs 0-11 */
- openpic_set_sources(48, 12, OpenPIC_Addr + 0x10000);
-
- /* we let openpic interrupts starting from an offset, to
- * leave space for cascading interrupts underneath.
- */
- openpic_init(MPC85xx_OPENPIC_IRQ_OFFSET);
-
-#ifdef CONFIG_PCI
- openpic_hookup_cascade(PIRQ0A, "82c59 cascade", i8259_irq);
-
- i8259_init(0, 0);
-#endif
-
-#ifdef CONFIG_CPM2
- /* Setup CPM2 PIC */
- cpm2_init_IRQ();
-
- setup_irq(MPC85xx_IRQ_CPM, &cpm2_irqaction);
-#endif
-
- return;
-}
-
-#ifdef CONFIG_PCI
-/*
- * interrupt routing
- */
-int
-mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
- struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
-
- if (!hose->index)
- {
- /* Handle PCI1 interrupts */
- char pci_irq_table[][4] =
- /*
- * PCI IDSEL/INTPIN->INTLINE
- * A B C D
- */
-
- /* Note IRQ assignment for slots is based on which slot the elysium is
- * in -- in this setup elysium is in slot #2 (this PIRQA as first
- * interrupt on slot */
- {
- { 0, 1, 2, 3 }, /* 16 - PMC */
- { 0, 1, 2, 3 }, /* 17 P2P (Tsi320) */
- { 0, 1, 2, 3 }, /* 18 - Slot 1 */
- { 1, 2, 3, 0 }, /* 19 - Slot 2 */
- { 2, 3, 0, 1 }, /* 20 - Slot 3 */
- { 3, 0, 1, 2 }, /* 21 - Slot 4 */
- };
-
- const long min_idsel = 16, max_idsel = 21, irqs_per_slot = 4;
- int i, j;
-
- for (i = 0; i < 6; i++)
- for (j = 0; j < 4; j++)
- pci_irq_table[i][j] =
- ((pci_irq_table[i][j] + 5 -
- cds_pci_slot) & 0x3) + PIRQ0A;
-
- return PCI_IRQ_TABLE_LOOKUP;
- } else {
- /* Handle PCI2 interrupts (if we have one) */
- char pci_irq_table[][4] =
- {
- /*
- * We only have one slot and one interrupt
- * going to PIRQA - PIRQD */
- { PIRQ1A, PIRQ1A, PIRQ1A, PIRQ1A }, /* 21 - slot 0 */
- };
-
- const long min_idsel = 21, max_idsel = 21, irqs_per_slot = 4;
-
- return PCI_IRQ_TABLE_LOOKUP;
- }
-}
-
-#define ARCADIA_HOST_BRIDGE_IDSEL 17
-#define ARCADIA_2ND_BRIDGE_IDSEL 3
-
-extern int mpc85xx_pci1_last_busno;
-
-int
-mpc85xx_exclude_device(u_char bus, u_char devfn)
-{
- if (bus == 0 && PCI_SLOT(devfn) == 0)
- return PCIBIOS_DEVICE_NOT_FOUND;
-#ifdef CONFIG_85xx_PCI2
- if (mpc85xx_pci1_last_busno)
- if (bus == (mpc85xx_pci1_last_busno + 1) && PCI_SLOT(devfn) == 0)
- return PCIBIOS_DEVICE_NOT_FOUND;
-#endif
- /* We explicitly do not go past the Tundra 320 Bridge */
- if ((bus == 1) && (PCI_SLOT(devfn) == ARCADIA_2ND_BRIDGE_IDSEL))
- return PCIBIOS_DEVICE_NOT_FOUND;
- if ((bus == 0) && (PCI_SLOT(devfn) == ARCADIA_2ND_BRIDGE_IDSEL))
- return PCIBIOS_DEVICE_NOT_FOUND;
- else
- return PCIBIOS_SUCCESSFUL;
-}
-
-void __init
-mpc85xx_cds_enable_via(struct pci_controller *hose)
-{
- u32 pci_class;
- u16 vid, did;
-
- early_read_config_dword(hose, 0, 0x88, PCI_CLASS_REVISION, &pci_class);
- if ((pci_class >> 16) != PCI_CLASS_BRIDGE_PCI)
- return;
-
- /* Configure P2P so that we can reach bus 1 */
- early_write_config_byte(hose, 0, 0x88, PCI_PRIMARY_BUS, 0);
- early_write_config_byte(hose, 0, 0x88, PCI_SECONDARY_BUS, 1);
- early_write_config_byte(hose, 0, 0x88, PCI_SUBORDINATE_BUS, 0xff);
-
- early_read_config_word(hose, 1, 0x10, PCI_VENDOR_ID, &vid);
- early_read_config_word(hose, 1, 0x10, PCI_DEVICE_ID, &did);
-
- if ((vid != PCI_VENDOR_ID_VIA) ||
- (did != PCI_DEVICE_ID_VIA_82C686))
- return;
-
- /* Enable USB and IDE functions */
- early_write_config_byte(hose, 1, 0x10, 0x48, 0x08);
-}
-
-void __init
-mpc85xx_cds_fixup_via(struct pci_controller *hose)
-{
- u32 pci_class;
- u16 vid, did;
-
- early_read_config_dword(hose, 0, 0x88, PCI_CLASS_REVISION, &pci_class);
- if ((pci_class >> 16) != PCI_CLASS_BRIDGE_PCI)
- return;
-
- /*
- * Force the backplane P2P bridge to have a window
- * open from 0x00000000-0x00001fff in PCI I/O space.
- * This allows legacy I/O (i8259, etc) on the VIA
- * southbridge to be accessed.
- */
- early_write_config_byte(hose, 0, 0x88, PCI_IO_BASE, 0x00);
- early_write_config_word(hose, 0, 0x88, PCI_IO_BASE_UPPER16, 0x0000);
- early_write_config_byte(hose, 0, 0x88, PCI_IO_LIMIT, 0x10);
- early_write_config_word(hose, 0, 0x88, PCI_IO_LIMIT_UPPER16, 0x0000);
-
- early_read_config_word(hose, 1, 0x10, PCI_VENDOR_ID, &vid);
- early_read_config_word(hose, 1, 0x10, PCI_DEVICE_ID, &did);
- if ((vid != PCI_VENDOR_ID_VIA) ||
- (did != PCI_DEVICE_ID_VIA_82C686))
- return;
-
- /*
- * Since the P2P window was forced to cover the fixed
- * legacy I/O addresses, it is necessary to manually
- * place the base addresses for the IDE and USB functions
- * within this window.
- */
- /* Function 1, IDE */
- early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_0, 0x1ff8);
- early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_1, 0x1ff4);
- early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_2, 0x1fe8);
- early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_3, 0x1fe4);
- early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_4, 0x1fd0);
-
- /* Function 2, USB ports 0-1 */
- early_write_config_dword(hose, 1, 0x12, PCI_BASE_ADDRESS_4, 0x1fa0);
-
- /* Function 3, USB ports 2-3 */
- early_write_config_dword(hose, 1, 0x13, PCI_BASE_ADDRESS_4, 0x1f80);
-
- /* Function 5, Power Management */
- early_write_config_dword(hose, 1, 0x15, PCI_BASE_ADDRESS_0, 0x1e00);
- early_write_config_dword(hose, 1, 0x15, PCI_BASE_ADDRESS_1, 0x1dfc);
- early_write_config_dword(hose, 1, 0x15, PCI_BASE_ADDRESS_2, 0x1df8);
-
- /* Function 6, AC97 Interface */
- early_write_config_dword(hose, 1, 0x16, PCI_BASE_ADDRESS_0, 0x1c00);
-}
-
-void __init
-mpc85xx_cds_pcibios_fixup(void)
-{
- struct pci_dev *dev;
- u_char c;
-
- if ((dev = pci_get_device(PCI_VENDOR_ID_VIA,
- PCI_DEVICE_ID_VIA_82C586_1, NULL))) {
- /*
- * U-Boot does not set the enable bits
- * for the IDE device. Force them on here.
- */
- pci_read_config_byte(dev, 0x40, &c);
- c |= 0x03; /* IDE: Chip Enable Bits */
- pci_write_config_byte(dev, 0x40, c);
-
- /*
- * Since only primary interface works, force the
- * IDE function to standard primary IDE interrupt
- * w/ 8259 offset
- */
- dev->irq = 14;
- pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
- pci_dev_put(dev);
- }
-
- /*
- * Force legacy USB interrupt routing
- */
- if ((dev = pci_get_device(PCI_VENDOR_ID_VIA,
- PCI_DEVICE_ID_VIA_82C586_2, NULL))) {
- dev->irq = 10;
- pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 10);
-
- if ((dev = pci_get_device(PCI_VENDOR_ID_VIA,
- PCI_DEVICE_ID_VIA_82C586_2, dev))) {
- dev->irq = 11;
- pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 11);
- }
- pci_dev_put(dev);
- }
-}
-#endif /* CONFIG_PCI */
-
-TODC_ALLOC();
-
-/* ************************************************************************
- *
- * Setup the architecture
- *
- */
-static void __init
-mpc85xx_cds_setup_arch(void)
-{
- bd_t *binfo = (bd_t *) __res;
- unsigned int freq;
- struct gianfar_platform_data *pdata;
- struct gianfar_mdio_data *mdata;
-
- /* get the core frequency */
- freq = binfo->bi_intfreq;
-
- printk("mpc85xx_cds_setup_arch\n");
-
-#ifdef CONFIG_CPM2
- cpm2_reset();
-#endif
-
- cadmus = ioremap(CADMUS_BASE, CADMUS_SIZE);
- cds_pci_slot = ((cadmus[CM_CSR] >> 6) & 0x3) + 1;
- printk("CDS Version = %x in PCI slot %d\n", cadmus[CM_VER], cds_pci_slot);
-
- /* Setup TODC access */
- TODC_INIT(TODC_TYPE_DS1743,
- 0,
- 0,
- ioremap(CDS_RTC_ADDR, CDS_RTC_SIZE),
- 8);
-
- /* Set loops_per_jiffy to a half-way reasonable value,
- for use until calibrate_delay gets called. */
- loops_per_jiffy = freq / HZ;
-
-#ifdef CONFIG_PCI
- /* VIA IDE configuration */
- ppc_md.pcibios_fixup = mpc85xx_cds_pcibios_fixup;
-
- /* setup PCI host bridges */
- mpc85xx_setup_hose();
-#endif
-
-#ifdef CONFIG_SERIAL_8250
- mpc85xx_early_serial_map();
-#endif
-
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
- /* Invalidate the entry we stole earlier the serial ports
- * should be properly mapped */
- invalidate_tlbcam_entry(num_tlbcam_entries - 1);
-#endif
-
- /* setup the board related info for the MDIO bus */
- mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO);
-
- mdata->irq[0] = MPC85xx_IRQ_EXT5;
- mdata->irq[1] = MPC85xx_IRQ_EXT5;
- mdata->irq[2] = PHY_POLL;
- mdata->irq[3] = PHY_POLL;
- mdata->irq[31] = PHY_POLL;
-
- /* setup the board related information for the enet controllers */
- pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1);
- if (pdata) {
- pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
- pdata->bus_id = 0;
- pdata->phy_id = 0;
- memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
- }
-
- pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2);
- if (pdata) {
- pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
- pdata->bus_id = 0;
- pdata->phy_id = 1;
- memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
- }
-
- pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_eTSEC1);
- if (pdata) {
- pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
- pdata->bus_id = 0;
- pdata->phy_id = 0;
- memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
- }
-
- pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_eTSEC2);
- if (pdata) {
- pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
- pdata->bus_id = 0;
- pdata->phy_id = 1;
- memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
- }
-
- ppc_sys_device_remove(MPC85xx_eTSEC3);
- ppc_sys_device_remove(MPC85xx_eTSEC4);
-
-#ifdef CONFIG_BLK_DEV_INITRD
- if (initrd_start)
- ROOT_DEV = Root_RAM0;
- else
-#endif
-#ifdef CONFIG_ROOT_NFS
- ROOT_DEV = Root_NFS;
-#else
- ROOT_DEV = Root_HDA1;
-#endif
-}
-
-/* ************************************************************************ */
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
- unsigned long r6, unsigned long r7)
-{
- /* parse_bootinfo must always be called first */
- parse_bootinfo(find_bootinfo());
-
- /*
- * If we were passed in a board information, copy it into the
- * residual data area.
- */
- if (r3) {
- memcpy((void *) __res, (void *) (r3 + KERNELBASE),
- sizeof (bd_t));
-
- }
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
- {
- bd_t *binfo = (bd_t *) __res;
- struct uart_port p;
-
- /* Use the last TLB entry to map CCSRBAR to allow access to DUART regs */
- settlbcam(num_tlbcam_entries - 1, binfo->bi_immr_base,
- binfo->bi_immr_base, MPC85xx_CCSRBAR_SIZE, _PAGE_IO, 0);
-
- memset(&p, 0, sizeof (p));
- p.iotype = UPIO_MEM;
- p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART0_OFFSET;
- p.uartclk = binfo->bi_busfreq;
-
- gen550_init(0, &p);
-
- memset(&p, 0, sizeof (p));
- p.iotype = UPIO_MEM;
- p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART1_OFFSET;
- p.uartclk = binfo->bi_busfreq;
-
- gen550_init(1, &p);
- }
-#endif
-
-#if defined(CONFIG_BLK_DEV_INITRD)
- /*
- * If the init RAM disk has been configured in, and there's a valid
- * starting address for it, set it up.
- */
- if (r4) {
- initrd_start = r4 + KERNELBASE;
- initrd_end = r5 + KERNELBASE;
- }
-#endif /* CONFIG_BLK_DEV_INITRD */
-
- /* Copy the kernel command line arguments to a safe place. */
-
- if (r6) {
- *(char *) (r7 + KERNELBASE) = 0;
- strcpy(cmd_line, (char *) (r6 + KERNELBASE));
- }
-
- identify_ppc_sys_by_id(mfspr(SPRN_SVR));
-
- /* setup the PowerPC module struct */
- ppc_md.setup_arch = mpc85xx_cds_setup_arch;
- ppc_md.show_cpuinfo = mpc85xx_cds_show_cpuinfo;
-
- ppc_md.init_IRQ = mpc85xx_cds_init_IRQ;
- ppc_md.get_irq = openpic_get_irq;
-
- ppc_md.restart = mpc85xx_restart;
- ppc_md.power_off = mpc85xx_power_off;
- ppc_md.halt = mpc85xx_halt;
-
- ppc_md.find_end_of_memory = mpc85xx_find_end_of_memory;
-
- ppc_md.calibrate_decr = mpc85xx_calibrate_decr;
-
- ppc_md.time_init = todc_time_init;
- ppc_md.set_rtc_time = todc_set_rtc_time;
- ppc_md.get_rtc_time = todc_get_rtc_time;
-
- ppc_md.nvram_read_val = todc_direct_read_val;
- ppc_md.nvram_write_val = todc_direct_write_val;
-
-#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG)
- ppc_md.progress = gen550_progress;
-#endif /* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */
-#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_KGDB)
- ppc_md.early_serial_map = mpc85xx_early_serial_map;
-#endif /* CONFIG_SERIAL_8250 && CONFIG_KGDB */
-
- if (ppc_md.progress)
- ppc_md.progress("mpc85xx_cds_init(): exit", 0);
-
- return;
-}
diff --git a/arch/ppc/platforms/85xx/mpc85xx_cds_common.h b/arch/ppc/platforms/85xx/mpc85xx_cds_common.h
deleted file mode 100644
index 32c5455..0000000
--- a/arch/ppc/platforms/85xx/mpc85xx_cds_common.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * MPC85xx CDS board definitions
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * Copyright 2004 Freescale Semiconductor, Inc
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-#ifndef __MACH_MPC85XX_CDS_H__
-#define __MACH_MPC85XX_CDS_H__
-
-#include <linux/serial.h>
-#include <asm/ppcboot.h>
-#include <linux/initrd.h>
-#include <syslib/ppc85xx_setup.h>
-
-#define BOARD_CCSRBAR ((uint)0xe0000000)
-#define CCSRBAR_SIZE ((uint)1024*1024)
-
-/* CADMUS info */
-#define CADMUS_BASE (0xf8004000)
-#define CADMUS_SIZE (256)
-#define CM_VER (0)
-#define CM_CSR (1)
-#define CM_RST (2)
-
-/* CDS NVRAM/RTC */
-#define CDS_RTC_ADDR (0xf8000000)
-#define CDS_RTC_SIZE (8 * 1024)
-
-/* PCI config */
-#define PCI1_CFG_ADDR_OFFSET (0x8000)
-#define PCI1_CFG_DATA_OFFSET (0x8004)
-
-#define PCI2_CFG_ADDR_OFFSET (0x9000)
-#define PCI2_CFG_DATA_OFFSET (0x9004)
-
-/* PCI interrupt controller */
-#define PIRQ0A MPC85xx_IRQ_EXT0
-#define PIRQ0B MPC85xx_IRQ_EXT1
-#define PIRQ0C MPC85xx_IRQ_EXT2
-#define PIRQ0D MPC85xx_IRQ_EXT3
-#define PIRQ1A MPC85xx_IRQ_EXT11
-
-/* PCI 1 memory map */
-#define MPC85XX_PCI1_LOWER_IO 0x00000000
-#define MPC85XX_PCI1_UPPER_IO 0x00ffffff
-
-#define MPC85XX_PCI1_LOWER_MEM 0x80000000
-#define MPC85XX_PCI1_UPPER_MEM 0x9fffffff
-
-#define MPC85XX_PCI1_IO_BASE 0xe2000000
-#define MPC85XX_PCI1_MEM_OFFSET 0x00000000
-
-#define MPC85XX_PCI1_IO_SIZE 0x01000000
-
-/* PCI 2 memory map */
-/* Note: the standard PPC fixups will cause IO space to get bumped by
- * hose->io_base_virt - isa_io_base => MPC85XX_PCI1_IO_SIZE */
-#define MPC85XX_PCI2_LOWER_IO 0x00000000
-#define MPC85XX_PCI2_UPPER_IO 0x00ffffff
-
-#define MPC85XX_PCI2_LOWER_MEM 0xa0000000
-#define MPC85XX_PCI2_UPPER_MEM 0xbfffffff
-
-#define MPC85XX_PCI2_IO_BASE 0xe3000000
-#define MPC85XX_PCI2_MEM_OFFSET 0x00000000
-
-#define MPC85XX_PCI2_IO_SIZE 0x01000000
-
-#define NR_8259_INTS 16
-#define CPM_IRQ_OFFSET NR_8259_INTS
-
-#endif /* __MACH_MPC85XX_CDS_H__ */
diff --git a/arch/ppc/platforms/85xx/sbc8560.c b/arch/ppc/platforms/85xx/sbc8560.c
deleted file mode 100644
index 3d7addb..0000000
--- a/arch/ppc/platforms/85xx/sbc8560.c
+++ /dev/null
@@ -1,234 +0,0 @@
-/*
- * Wind River SBC8560 board specific routines
- *
- * Maintainer: Kumar Gala
- *
- * Copyright 2004 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/major.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/serial.h>
-#include <linux/tty.h> /* for linux/serial_core.h */
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/initrd.h>
-#include <linux/module.h>
-#include <linux/fsl_devices.h>
-
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/atomic.h>
-#include <asm/time.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/open_pic.h>
-#include <asm/bootinfo.h>
-#include <asm/pci-bridge.h>
-#include <asm/mpc85xx.h>
-#include <asm/irq.h>
-#include <asm/immap_85xx.h>
-#include <asm/kgdb.h>
-#include <asm/ppc_sys.h>
-#include <mm/mmu_decl.h>
-
-#include <syslib/ppc85xx_common.h>
-#include <syslib/ppc85xx_setup.h>
-
-#ifdef CONFIG_SERIAL_8250
-static void __init
-sbc8560_early_serial_map(void)
-{
- struct uart_port uart_req;
-
- /* Setup serial port access */
- memset(&uart_req, 0, sizeof (uart_req));
- uart_req.irq = MPC85xx_IRQ_EXT9;
- uart_req.flags = STD_COM_FLAGS;
- uart_req.uartclk = BASE_BAUD * 16;
- uart_req.iotype = UPIO_MEM;
- uart_req.mapbase = UARTA_ADDR;
- uart_req.membase = ioremap(uart_req.mapbase, MPC85xx_UART0_SIZE);
- uart_req.type = PORT_16650;
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
- gen550_init(0, &uart_req);
-#endif
-
- if (early_serial_setup(&uart_req) != 0)
- printk("Early serial init of port 0 failed\n");
-
- /* Assume early_serial_setup() doesn't modify uart_req */
- uart_req.line = 1;
- uart_req.mapbase = UARTB_ADDR;
- uart_req.membase = ioremap(uart_req.mapbase, MPC85xx_UART1_SIZE);
- uart_req.irq = MPC85xx_IRQ_EXT10;
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
- gen550_init(1, &uart_req);
-#endif
-
- if (early_serial_setup(&uart_req) != 0)
- printk("Early serial init of port 1 failed\n");
-}
-#endif
-
-/* ************************************************************************
- *
- * Setup the architecture
- *
- */
-static void __init
-sbc8560_setup_arch(void)
-{
- bd_t *binfo = (bd_t *) __res;
- unsigned int freq;
- struct gianfar_platform_data *pdata;
- struct gianfar_mdio_data *mdata;
-
- /* get the core frequency */
- freq = binfo->bi_intfreq;
-
- if (ppc_md.progress)
- ppc_md.progress("sbc8560_setup_arch()", 0);
-
- /* Set loops_per_jiffy to a half-way reasonable value,
- for use until calibrate_delay gets called. */
- loops_per_jiffy = freq / HZ;
-
-#ifdef CONFIG_PCI
- /* setup PCI host bridges */
- mpc85xx_setup_hose();
-#endif
-#ifdef CONFIG_SERIAL_8250
- sbc8560_early_serial_map();
-#endif
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
- /* Invalidate the entry we stole earlier the serial ports
- * should be properly mapped */
- invalidate_tlbcam_entry(num_tlbcam_entries - 1);
-#endif
-
- /* setup the board related info for the MDIO bus */
- mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO);
-
- mdata->irq[25] = MPC85xx_IRQ_EXT6;
- mdata->irq[26] = MPC85xx_IRQ_EXT7;
- mdata->irq[31] = PHY_POLL;
-
- /* setup the board related information for the enet controllers */
- pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1);
- if (pdata) {
- pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
- pdata->bus_id = 0;
- pdata->phy_id = 25;
- memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
- }
-
- pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2);
- if (pdata) {
- pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
- pdata->bus_id = 0;
- pdata->phy_id = 26;
- memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
- }
-
-#ifdef CONFIG_BLK_DEV_INITRD
- if (initrd_start)
- ROOT_DEV = Root_RAM0;
- else
-#endif
-#ifdef CONFIG_ROOT_NFS
- ROOT_DEV = Root_NFS;
-#else
- ROOT_DEV = Root_HDA1;
-#endif
-}
-
-/* ************************************************************************ */
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
- unsigned long r6, unsigned long r7)
-{
- /* parse_bootinfo must always be called first */
- parse_bootinfo(find_bootinfo());
-
- /*
- * If we were passed in a board information, copy it into the
- * residual data area.
- */
- if (r3) {
- memcpy((void *) __res, (void *) (r3 + KERNELBASE),
- sizeof (bd_t));
- }
-
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
- /* Use the last TLB entry to map CCSRBAR to allow access to DUART regs */
- settlbcam(num_tlbcam_entries - 1, UARTA_ADDR,
- UARTA_ADDR, 0x1000, _PAGE_IO, 0);
-#endif
-
-#if defined(CONFIG_BLK_DEV_INITRD)
- /*
- * If the init RAM disk has been configured in, and there's a valid
- * starting address for it, set it up.
- */
- if (r4) {
- initrd_start = r4 + KERNELBASE;
- initrd_end = r5 + KERNELBASE;
- }
-#endif /* CONFIG_BLK_DEV_INITRD */
-
- /* Copy the kernel command line arguments to a safe place. */
-
- if (r6) {
- *(char *) (r7 + KERNELBASE) = 0;
- strcpy(cmd_line, (char *) (r6 + KERNELBASE));
- }
-
- identify_ppc_sys_by_id(mfspr(SPRN_SVR));
-
- /* setup the PowerPC module struct */
- ppc_md.setup_arch = sbc8560_setup_arch;
- ppc_md.show_cpuinfo = sbc8560_show_cpuinfo;
-
- ppc_md.init_IRQ = sbc8560_init_IRQ;
- ppc_md.get_irq = openpic_get_irq;
-
- ppc_md.restart = mpc85xx_restart;
- ppc_md.power_off = mpc85xx_power_off;
- ppc_md.halt = mpc85xx_halt;
-
- ppc_md.find_end_of_memory = mpc85xx_find_end_of_memory;
-
- ppc_md.time_init = NULL;
- ppc_md.set_rtc_time = NULL;
- ppc_md.get_rtc_time = NULL;
- ppc_md.calibrate_decr = mpc85xx_calibrate_decr;
-
-#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG)
- ppc_md.progress = gen550_progress;
-#endif /* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */
-#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_KGDB)
- ppc_md.early_serial_map = sbc8560_early_serial_map;
-#endif /* CONFIG_SERIAL_8250 && CONFIG_KGDB */
-
- if (ppc_md.progress)
- ppc_md.progress("sbc8560_init(): exit", 0);
-}
diff --git a/arch/ppc/platforms/85xx/sbc8560.h b/arch/ppc/platforms/85xx/sbc8560.h
deleted file mode 100644
index e5e156f..0000000
--- a/arch/ppc/platforms/85xx/sbc8560.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * Wind River SBC8560 board definitions
- *
- * Copyright 2003 Motorola Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-#ifndef __MACH_SBC8560_H__
-#define __MACH_SBC8560_H__
-
-#include <platforms/85xx/sbc85xx.h>
-#include <asm/irq.h>
-
-#define CPM_MAP_ADDR (CCSRBAR + MPC85xx_CPM_OFFSET)
-
-#ifdef CONFIG_SERIAL_MANY_PORTS
-#define RS_TABLE_SIZE 64
-#else
-#define RS_TABLE_SIZE 2
-#endif
-
-/* Rate for the 1.8432 Mhz clock for the onboard serial chip */
-#define BASE_BAUD ( 1843200 / 16 )
-
-#ifdef CONFIG_SERIAL_DETECT_IRQ
-#define STD_COM_FLAGS (ASYNC_SKIP_TEST|ASYNC_AUTO_IRQ)
-#else
-#define STD_COM_FLAGS (ASYNC_SKIP_TEST)
-#endif
-
-#define STD_SERIAL_PORT_DFNS \
- { 0, BASE_BAUD, UARTA_ADDR, MPC85xx_IRQ_EXT9, STD_COM_FLAGS, /* ttyS0 */ \
- iomem_base: (u8 *)UARTA_ADDR, \
- io_type: SERIAL_IO_MEM }, \
- { 0, BASE_BAUD, UARTB_ADDR, MPC85xx_IRQ_EXT10, STD_COM_FLAGS, /* ttyS1 */ \
- iomem_base: (u8 *)UARTB_ADDR, \
- io_type: SERIAL_IO_MEM },
-
-#define SERIAL_PORT_DFNS \
- STD_SERIAL_PORT_DFNS
-
-#endif /* __MACH_SBC8560_H__ */
diff --git a/arch/ppc/platforms/85xx/sbc85xx.c b/arch/ppc/platforms/85xx/sbc85xx.c
deleted file mode 100644
index 2c587ca..0000000
--- a/arch/ppc/platforms/85xx/sbc85xx.c
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- * WindRiver PowerQUICC III SBC85xx board common routines
- *
- * Copyright 2002, 2003 Motorola Inc.
- * Copyright 2004 Red Hat, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/major.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/serial.h>
-#include <linux/module.h>
-
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/atomic.h>
-#include <asm/time.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/open_pic.h>
-#include <asm/bootinfo.h>
-#include <asm/pci-bridge.h>
-#include <asm/mpc85xx.h>
-#include <asm/irq.h>
-#include <asm/immap_85xx.h>
-#include <asm/ppc_sys.h>
-
-#include <mm/mmu_decl.h>
-
-#include <platforms/85xx/sbc85xx.h>
-
-unsigned char __res[sizeof (bd_t)];
-
-#ifndef CONFIG_PCI
-unsigned long isa_io_base = 0;
-unsigned long isa_mem_base = 0;
-unsigned long pci_dram_offset = 0;
-#endif
-
-extern unsigned long total_memory; /* in mm/init */
-
-/* Internal interrupts are all Level Sensitive, and Positive Polarity */
-static u_char sbc8560_openpic_initsenses[] __initdata = {
- MPC85XX_INTERNAL_IRQ_SENSES,
- 0x0, /* External 0: */
- 0x0, /* External 1: */
-#if defined(CONFIG_PCI)
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 2: PCI slot 0 */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 3: PCI slot 1 */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 4: PCI slot 2 */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 5: PCI slot 3 */
-#else
- 0x0, /* External 2: */
- 0x0, /* External 3: */
- 0x0, /* External 4: */
- 0x0, /* External 5: */
-#endif
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 6: PHY */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 7: PHY */
- 0x0, /* External 8: */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* External 9: PHY */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* External 10: PHY */
- 0x0, /* External 11: */
-};
-
-/* ************************************************************************ */
-int
-sbc8560_show_cpuinfo(struct seq_file *m)
-{
- uint pvid, svid, phid1;
- uint memsize = total_memory;
- bd_t *binfo = (bd_t *) __res;
- unsigned int freq;
-
- /* get the core frequency */
- freq = binfo->bi_intfreq;
-
- pvid = mfspr(SPRN_PVR);
- svid = mfspr(SPRN_SVR);
-
- seq_printf(m, "Vendor\t\t: Wind River\n");
- seq_printf(m, "Machine\t\t: SBC%s\n", cur_ppc_sys_spec->ppc_sys_name);
- seq_printf(m, "clock\t\t: %dMHz\n", freq / 1000000);
- seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
- seq_printf(m, "SVR\t\t: 0x%x\n", svid);
-
- /* Display cpu Pll setting */
- phid1 = mfspr(SPRN_HID1);
- seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
-
- /* Display the amount of memory */
- seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
-
- return 0;
-}
-
-void __init
-sbc8560_init_IRQ(void)
-{
- bd_t *binfo = (bd_t *) __res;
- /* Determine the Physical Address of the OpenPIC regs */
- phys_addr_t OpenPIC_PAddr =
- binfo->bi_immr_base + MPC85xx_OPENPIC_OFFSET;
- OpenPIC_Addr = ioremap(OpenPIC_PAddr, MPC85xx_OPENPIC_SIZE);
- OpenPIC_InitSenses = sbc8560_openpic_initsenses;
- OpenPIC_NumInitSenses = sizeof (sbc8560_openpic_initsenses);
-
- /* Skip reserved space and internal sources */
- openpic_set_sources(0, 32, OpenPIC_Addr + 0x10200);
- /* Map PIC IRQs 0-11 */
- openpic_set_sources(48, 12, OpenPIC_Addr + 0x10000);
-
- /* we let openpic interrupts starting from an offset, to
- * leave space for cascading interrupts underneath.
- */
- openpic_init(MPC85xx_OPENPIC_IRQ_OFFSET);
-
- return;
-}
-
-/*
- * interrupt routing
- */
-
-#ifdef CONFIG_PCI
-int mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel,
- unsigned char pin)
-{
- static char pci_irq_table[][4] =
- /*
- * PCI IDSEL/INTPIN->INTLINE
- * A B C D
- */
- {
- {PIRQA, PIRQB, PIRQC, PIRQD},
- {PIRQD, PIRQA, PIRQB, PIRQC},
- {PIRQC, PIRQD, PIRQA, PIRQB},
- {PIRQB, PIRQC, PIRQD, PIRQA},
- };
-
- const long min_idsel = 12, max_idsel = 15, irqs_per_slot = 4;
- return PCI_IRQ_TABLE_LOOKUP;
-}
-
-int mpc85xx_exclude_device(u_char bus, u_char devfn)
-{
- if (bus == 0 && PCI_SLOT(devfn) == 0)
- return PCIBIOS_DEVICE_NOT_FOUND;
- else
- return PCIBIOS_SUCCESSFUL;
-}
-#endif /* CONFIG_PCI */
diff --git a/arch/ppc/platforms/85xx/sbc85xx.h b/arch/ppc/platforms/85xx/sbc85xx.h
deleted file mode 100644
index 51df4dc..0000000
--- a/arch/ppc/platforms/85xx/sbc85xx.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * WindRiver PowerQUICC III SBC85xx common board definitions
- *
- * Copyright 2003 Motorola Inc.
- * Copyright 2004 Red Hat, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-#ifndef __PLATFORMS_85XX_SBC85XX_H__
-#define __PLATFORMS_85XX_SBC85XX_H__
-
-#include <linux/init.h>
-#include <linux/seq_file.h>
-#include <asm/ppcboot.h>
-
-#define BOARD_CCSRBAR ((uint)0xff700000)
-#define CCSRBAR_SIZE ((uint)1024*1024)
-
-#define BCSR_ADDR ((uint)0xfc000000)
-#define BCSR_SIZE ((uint)(16 * 1024 * 1024))
-
-#define UARTA_ADDR (BCSR_ADDR + 0x00700000)
-#define UARTB_ADDR (BCSR_ADDR + 0x00800000)
-#define RTC_DEVICE_ADDR (BCSR_ADDR + 0x00900000)
-#define EEPROM_ADDR (BCSR_ADDR + 0x00b00000)
-
-extern int sbc8560_show_cpuinfo(struct seq_file *m);
-extern void sbc8560_init_IRQ(void) __init;
-
-/* PCI interrupt controller */
-#define PIRQA MPC85xx_IRQ_EXT1
-#define PIRQB MPC85xx_IRQ_EXT2
-#define PIRQC MPC85xx_IRQ_EXT3
-#define PIRQD MPC85xx_IRQ_EXT4
-
-#define MPC85XX_PCI1_LOWER_IO 0x00000000
-#define MPC85XX_PCI1_UPPER_IO 0x00ffffff
-
-#define MPC85XX_PCI1_LOWER_MEM 0x80000000
-#define MPC85XX_PCI1_UPPER_MEM 0x9fffffff
-
-#define MPC85XX_PCI1_IO_BASE 0xe2000000
-#define MPC85XX_PCI1_MEM_OFFSET 0x00000000
-
-#define MPC85XX_PCI1_IO_SIZE 0x01000000
-
-/* FCC1 Clock Source Configuration. These can be
- * redefined in the board specific file.
- * Can only choose from CLK9-12 */
-#define F1_RXCLK 12
-#define F1_TXCLK 11
-
-/* FCC2 Clock Source Configuration. These can be
- * redefined in the board specific file.
- * Can only choose from CLK13-16 */
-#define F2_RXCLK 13
-#define F2_TXCLK 14
-
-/* FCC3 Clock Source Configuration. These can be
- * redefined in the board specific file.
- * Can only choose from CLK13-16 */
-#define F3_RXCLK 15
-#define F3_TXCLK 16
-
-#endif /* __PLATFORMS_85XX_SBC85XX_H__ */
diff --git a/arch/ppc/platforms/85xx/stx_gp3.c b/arch/ppc/platforms/85xx/stx_gp3.c
deleted file mode 100644
index 8748da3..0000000
--- a/arch/ppc/platforms/85xx/stx_gp3.c
+++ /dev/null
@@ -1,339 +0,0 @@
-/*
- * STx GP3 board specific routines
- *
- * Dan Malek <dan@embeddededge.com>
- * Copyright 2004 Embedded Edge, LLC
- *
- * Copied from mpc8560_ads.c
- * Copyright 2002, 2003 Motorola Inc.
- *
- * Ported to 2.6, Matt Porter <mporter@kernel.crashing.org>
- * Copyright 2004-2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/major.h>
-#include <linux/blkdev.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/root_dev.h>
-#include <linux/seq_file.h>
-#include <linux/serial.h>
-#include <linux/initrd.h>
-#include <linux/module.h>
-#include <linux/fsl_devices.h>
-#include <linux/interrupt.h>
-#include <linux/rio.h>
-
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/atomic.h>
-#include <asm/time.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/open_pic.h>
-#include <asm/bootinfo.h>
-#include <asm/pci-bridge.h>
-#include <asm/mpc85xx.h>
-#include <asm/irq.h>
-#include <asm/immap_85xx.h>
-#include <asm/cpm2.h>
-#include <asm/ppc_sys.h>
-
-#include <syslib/cpm2_pic.h>
-#include <syslib/ppc85xx_common.h>
-
-
-unsigned char __res[sizeof(bd_t)];
-
-#ifndef CONFIG_PCI
-unsigned long isa_io_base = 0;
-unsigned long isa_mem_base = 0;
-unsigned long pci_dram_offset = 0;
-#endif
-
-/* Internal interrupts are all Level Sensitive, and Positive Polarity */
-static u8 gp3_openpic_initsenses[] __initdata = {
- MPC85XX_INTERNAL_IRQ_SENSES,
- 0x0, /* External 0: */
-#if defined(CONFIG_PCI)
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 1: PCI slot 0 */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 2: PCI slot 1 */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 3: PCI slot 2 */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 4: PCI slot 3 */
-#else
- 0x0, /* External 1: */
- 0x0, /* External 2: */
- 0x0, /* External 3: */
- 0x0, /* External 4: */
-#endif
- 0x0, /* External 5: */
- 0x0, /* External 6: */
- 0x0, /* External 7: */
- 0x0, /* External 8: */
- 0x0, /* External 9: */
- 0x0, /* External 10: */
- 0x0, /* External 11: */
-};
-
-/*
- * Setup the architecture
- */
-static void __init
-gp3_setup_arch(void)
-{
- bd_t *binfo = (bd_t *) __res;
- unsigned int freq;
- struct gianfar_platform_data *pdata;
- struct gianfar_mdio_data *mdata;
-
- cpm2_reset();
-
- /* get the core frequency */
- freq = binfo->bi_intfreq;
-
- if (ppc_md.progress)
- ppc_md.progress("gp3_setup_arch()", 0);
-
- /* Set loops_per_jiffy to a half-way reasonable value,
- for use until calibrate_delay gets called. */
- loops_per_jiffy = freq / HZ;
-
-#ifdef CONFIG_PCI
- /* setup PCI host bridges */
- mpc85xx_setup_hose();
-#endif
-
- /* setup the board related info for the MDIO bus */
- mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO);
-
- mdata->irq[2] = MPC85xx_IRQ_EXT5;
- mdata->irq[4] = MPC85xx_IRQ_EXT5;
- mdata->irq[31] = PHY_POLL;
-
- /* setup the board related information for the enet controllers */
- pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1);
- if (pdata) {
- /* pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; */
- pdata->bus_id = 0;
- pdata->phy_id = 2;
- memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
- }
-
- pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2);
- if (pdata) {
- /* pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; */
- pdata->bus_id = 0;
- pdata->phy_id = 4;
- memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
- }
-
-#ifdef CONFIG_BLK_DEV_INITRD
- if (initrd_start)
- ROOT_DEV = Root_RAM0;
- else
-#endif
-#ifdef CONFIG_ROOT_NFS
- ROOT_DEV = Root_NFS;
-#else
- ROOT_DEV = Root_HDA1;
-#endif
-
- printk ("bi_immr_base = %8.8lx\n", binfo->bi_immr_base);
-}
-
-static irqreturn_t cpm2_cascade(int irq, void *dev_id)
-{
- while ((irq = cpm2_get_irq()) >= 0)
- __do_IRQ(irq);
-
- return IRQ_HANDLED;
-}
-
-static struct irqaction cpm2_irqaction = {
- .handler = cpm2_cascade,
- .flags = IRQF_DISABLED,
- .mask = CPU_MASK_NONE,
- .name = "cpm2_cascade",
-};
-
-static void __init
-gp3_init_IRQ(void)
-{
- bd_t *binfo = (bd_t *) __res;
-
- /*
- * Setup OpenPIC
- */
-
- /* Determine the Physical Address of the OpenPIC regs */
- phys_addr_t OpenPIC_PAddr =
- binfo->bi_immr_base + MPC85xx_OPENPIC_OFFSET;
- OpenPIC_Addr = ioremap(OpenPIC_PAddr, MPC85xx_OPENPIC_SIZE);
- OpenPIC_InitSenses = gp3_openpic_initsenses;
- OpenPIC_NumInitSenses = sizeof (gp3_openpic_initsenses);
-
- /* Skip reserved space and internal sources */
- openpic_set_sources(0, 32, OpenPIC_Addr + 0x10200);
-
- /* Map PIC IRQs 0-11 */
- openpic_set_sources(48, 12, OpenPIC_Addr + 0x10000);
-
- /*
- * Let openpic interrupts starting from an offset, to
- * leave space for cascading interrupts underneath.
- */
- openpic_init(MPC85xx_OPENPIC_IRQ_OFFSET);
-
- /* Setup CPM2 PIC */
- cpm2_init_IRQ();
-
- setup_irq(MPC85xx_IRQ_CPM, &cpm2_irqaction);
-
- return;
-}
-
-static int
-gp3_show_cpuinfo(struct seq_file *m)
-{
- uint pvid, svid, phid1;
- bd_t *binfo = (bd_t *) __res;
- uint memsize;
- unsigned int freq;
- extern unsigned long total_memory; /* in mm/init */
-
- /* get the core frequency */
- freq = binfo->bi_intfreq;
-
- pvid = mfspr(SPRN_PVR);
- svid = mfspr(SPRN_SVR);
-
- memsize = total_memory;
-
- seq_printf(m, "Vendor\t\t: RPC Electronics STx \n");
- seq_printf(m, "Machine\t\t: GP3 - MPC%s\n", cur_ppc_sys_spec->ppc_sys_name);
- seq_printf(m, "bus freq\t: %u.%.6u MHz\n", freq / 1000000,
- freq % 1000000);
- seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
- seq_printf(m, "SVR\t\t: 0x%x\n", svid);
-
- /* Display cpu Pll setting */
- phid1 = mfspr(SPRN_HID1);
- seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
-
- /* Display the amount of memory */
- seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
-
- return 0;
-}
-
-#ifdef CONFIG_PCI
-int mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel,
- unsigned char pin)
-{
- static char pci_irq_table[][4] =
- /*
- * PCI IDSEL/INTPIN->INTLINE
- * A B C D
- */
- {
- {PIRQA, PIRQB, PIRQC, PIRQD},
- {PIRQD, PIRQA, PIRQB, PIRQC},
- {PIRQC, PIRQD, PIRQA, PIRQB},
- {PIRQB, PIRQC, PIRQD, PIRQA},
- };
-
- const long min_idsel = 12, max_idsel = 15, irqs_per_slot = 4;
- return PCI_IRQ_TABLE_LOOKUP;
-}
-
-int mpc85xx_exclude_device(u_char bus, u_char devfn)
-{
- if (bus == 0 && PCI_SLOT(devfn) == 0)
- return PCIBIOS_DEVICE_NOT_FOUND;
- else
- return PCIBIOS_SUCCESSFUL;
-}
-#endif /* CONFIG_PCI */
-
-#ifdef CONFIG_RAPIDIO
-extern void mpc85xx_rio_setup(int law_start, int law_size);
-void
-platform_rio_init(void)
-{
- /*
- * The STx firmware configures the RapidIO Local Access Window
- * at 0xc0000000 with a size of 512MB.
- */
- mpc85xx_rio_setup(0xc0000000, 0x20000000);
-}
-#endif /* CONFIG_RAPIDIO */
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
- unsigned long r6, unsigned long r7)
-{
- /* parse_bootinfo must always be called first */
- parse_bootinfo(find_bootinfo());
-
- /*
- * If we were passed in a board information, copy it into the
- * residual data area.
- */
- if (r3) {
- memcpy((void *) __res, (void *) (r3 + KERNELBASE),
- sizeof (bd_t));
-
- }
-#if defined(CONFIG_BLK_DEV_INITRD)
- /*
- * If the init RAM disk has been configured in, and there's a valid
- * starting address for it, set it up.
- */
- if (r4) {
- initrd_start = r4 + KERNELBASE;
- initrd_end = r5 + KERNELBASE;
- }
-#endif /* CONFIG_BLK_DEV_INITRD */
-
- /* Copy the kernel command line arguments to a safe place. */
-
- if (r6) {
- *(char *) (r7 + KERNELBASE) = 0;
- strcpy(cmd_line, (char *) (r6 + KERNELBASE));
- }
-
- identify_ppc_sys_by_id(mfspr(SPRN_SVR));
-
- /* setup the PowerPC module struct */
- ppc_md.setup_arch = gp3_setup_arch;
- ppc_md.show_cpuinfo = gp3_show_cpuinfo;
-
- ppc_md.init_IRQ = gp3_init_IRQ;
- ppc_md.get_irq = openpic_get_irq;
-
- ppc_md.restart = mpc85xx_restart;
- ppc_md.power_off = mpc85xx_power_off;
- ppc_md.halt = mpc85xx_halt;
-
- ppc_md.find_end_of_memory = mpc85xx_find_end_of_memory;
-
- ppc_md.calibrate_decr = mpc85xx_calibrate_decr;
-
- if (ppc_md.progress)
- ppc_md.progress("platform_init(): exit", 0);
-
- return;
-}
diff --git a/arch/ppc/platforms/85xx/stx_gp3.h b/arch/ppc/platforms/85xx/stx_gp3.h
deleted file mode 100644
index c6e34c0..0000000
--- a/arch/ppc/platforms/85xx/stx_gp3.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * STx GP3 board definitions
- *
- * Dan Malek (dan@embeddededge.com)
- * Copyright 2004 Embedded Edge, LLC
- *
- * Ported to 2.6, Matt Porter <mporter@kernel.crashing.org>
- * Copyright 2004-2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-#ifndef __MACH_STX_GP3_H
-#define __MACH_STX_GP3_H
-
-#include <linux/init.h>
-#include <asm/ppcboot.h>
-
-#define BOARD_CCSRBAR ((uint)0xe0000000)
-#define CCSRBAR_SIZE ((uint)1024*1024)
-
-#define CPM_MAP_ADDR (CCSRBAR + MPC85xx_CPM_OFFSET)
-
-#define BCSR_ADDR ((uint)0xfc000000)
-#define BCSR_SIZE ((uint)(16 * 1024))
-
-#define BCSR_TSEC1_RESET 0x00000080
-#define BCSR_TSEC2_RESET 0x00000040
-#define BCSR_LED1 0x00000008
-#define BCSR_LED2 0x00000004
-#define BCSR_LED3 0x00000002
-#define BCSR_LED4 0x00000001
-
-extern void mpc85xx_setup_hose(void) __init;
-extern void mpc85xx_restart(char *cmd);
-extern void mpc85xx_power_off(void);
-extern void mpc85xx_halt(void);
-extern void mpc85xx_init_IRQ(void) __init;
-extern unsigned long mpc85xx_find_end_of_memory(void) __init;
-extern void mpc85xx_calibrate_decr(void) __init;
-
-#define PCI_CFG_ADDR_OFFSET (0x8000)
-#define PCI_CFG_DATA_OFFSET (0x8004)
-
-/* PCI interrupt controller */
-#define PIRQA MPC85xx_IRQ_EXT1
-#define PIRQB MPC85xx_IRQ_EXT2
-#define PIRQC MPC85xx_IRQ_EXT3
-#define PIRQD MPC85xx_IRQ_EXT4
-#define PCI_MIN_IDSEL 16
-#define PCI_MAX_IDSEL 19
-#define PCI_IRQ_SLOT 4
-
-#define MPC85XX_PCI1_LOWER_IO 0x00000000
-#define MPC85XX_PCI1_UPPER_IO 0x00ffffff
-
-#define MPC85XX_PCI1_LOWER_MEM 0x80000000
-#define MPC85XX_PCI1_UPPER_MEM 0x9fffffff
-
-#define MPC85XX_PCI1_IO_BASE 0xe2000000
-#define MPC85XX_PCI1_MEM_OFFSET 0x00000000
-
-#define MPC85XX_PCI1_IO_SIZE 0x01000000
-
-#endif /* __MACH_STX_GP3_H */
diff --git a/arch/ppc/platforms/85xx/tqm85xx.c b/arch/ppc/platforms/85xx/tqm85xx.c
deleted file mode 100644
index 2a863a8..0000000
--- a/arch/ppc/platforms/85xx/tqm85xx.c
+++ /dev/null
@@ -1,412 +0,0 @@
-/*
- * TQM85xx (40/41/55/60) board specific routines
- *
- * Copyright (c) 2005 DENX Software Engineering
- * Stefan Roese <sr@denx.de>
- *
- * Based on original work by
- * Kumar Gala <galak@kernel.crashing.org>
- * Copyright 2004 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/major.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/serial.h>
-#include <linux/tty.h> /* for linux/serial_core.h */
-#include <linux/serial_core.h>
-#include <linux/initrd.h>
-#include <linux/module.h>
-#include <linux/fsl_devices.h>
-
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/atomic.h>
-#include <asm/time.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/open_pic.h>
-#include <asm/bootinfo.h>
-#include <asm/pci-bridge.h>
-#include <asm/mpc85xx.h>
-#include <asm/irq.h>
-#include <asm/immap_85xx.h>
-#include <asm/kgdb.h>
-#include <asm/ppc_sys.h>
-#include <asm/cpm2.h>
-#include <mm/mmu_decl.h>
-
-#include <syslib/ppc85xx_setup.h>
-#include <syslib/cpm2_pic.h>
-#include <syslib/ppc85xx_common.h>
-
-#ifndef CONFIG_PCI
-unsigned long isa_io_base = 0;
-unsigned long isa_mem_base = 0;
-#endif
-
-
-extern unsigned long total_memory; /* in mm/init */
-
-unsigned char __res[sizeof (bd_t)];
-
-/* Internal interrupts are all Level Sensitive, and Positive Polarity */
-static u_char tqm85xx_openpic_initsenses[] __initdata = {
- MPC85XX_INTERNAL_IRQ_SENSES,
- 0x0, /* External 0: */
- 0x0, /* External 1: */
-#if defined(CONFIG_PCI)
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 2: PCI INTA */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 3: PCI INTB */
-#else
- 0x0, /* External 2: */
- 0x0, /* External 3: */
-#endif
- 0x0, /* External 4: */
- 0x0, /* External 5: */
- 0x0, /* External 6: */
- 0x0, /* External 7: */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 8: PHY */
- 0x0, /* External 9: */
- 0x0, /* External 10: */
- 0x0, /* External 11: */
-};
-
-/* ************************************************************************
- *
- * Setup the architecture
- *
- */
-static void __init
-tqm85xx_setup_arch(void)
-{
- bd_t *binfo = (bd_t *) __res;
- unsigned int freq;
- struct gianfar_platform_data *pdata;
- struct gianfar_mdio_data *mdata;
-
-#ifdef CONFIG_MPC8560
- cpm2_reset();
-#endif
-
- /* get the core frequency */
- freq = binfo->bi_intfreq;
-
- if (ppc_md.progress)
- ppc_md.progress("tqm85xx_setup_arch()", 0);
-
- /* Set loops_per_jiffy to a half-way reasonable value,
- for use until calibrate_delay gets called. */
- loops_per_jiffy = freq / HZ;
-
-#ifdef CONFIG_PCI
- /* setup PCI host bridges */
- mpc85xx_setup_hose();
-#endif
-
-#ifndef CONFIG_MPC8560
-#if defined(CONFIG_SERIAL_8250)
- mpc85xx_early_serial_map();
-#endif
-
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
- /* Invalidate the entry we stole earlier the serial ports
- * should be properly mapped */
- invalidate_tlbcam_entry(num_tlbcam_entries - 1);
-#endif
-#endif /* CONFIG_MPC8560 */
-
- /* setup the board related info for the MDIO bus */
- mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO);
-
- mdata->irq[0] = MPC85xx_IRQ_EXT8;
- mdata->irq[1] = MPC85xx_IRQ_EXT8;
- mdata->irq[2] = PHY_POLL;
- mdata->irq[3] = MPC85xx_IRQ_EXT8;
- mdata->irq[31] = PHY_POLL;
-
- /* setup the board related information for the enet controllers */
- pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1);
- if (pdata) {
- pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
- pdata->bus_id = 0;
- pdata->phy_id = 2;
- memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
- }
-
- pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2);
- if (pdata) {
- pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
- pdata->bus_id = 0;
- pdata->phy_id = 1;
- memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
- }
-
-#ifdef CONFIG_MPC8540
- pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_FEC);
- if (pdata) {
- pdata->board_flags = 0;
- pdata->bus_id = 0;
- pdata->phy_id = 3;
- memcpy(pdata->mac_addr, binfo->bi_enet2addr, 6);
- }
-#endif
-
-#ifdef CONFIG_BLK_DEV_INITRD
- if (initrd_start)
- ROOT_DEV = Root_RAM0;
- else
-#endif
-#ifdef CONFIG_ROOT_NFS
- ROOT_DEV = Root_NFS;
-#else
- ROOT_DEV = Root_HDA1;
-#endif
-}
-
-#ifdef CONFIG_MPC8560
-static irqreturn_t cpm2_cascade(int irq, void *dev_id)
-{
- while ((irq = cpm2_get_irq()) >= 0)
- __do_IRQ(irq);
- return IRQ_HANDLED;
-}
-
-static struct irqaction cpm2_irqaction = {
- .handler = cpm2_cascade,
- .flags = IRQF_DISABLED,
- .mask = CPU_MASK_NONE,
- .name = "cpm2_cascade",
-};
-#endif /* CONFIG_MPC8560 */
-
-void __init
-tqm85xx_init_IRQ(void)
-{
- bd_t *binfo = (bd_t *) __res;
-
- /* Determine the Physical Address of the OpenPIC regs */
- phys_addr_t OpenPIC_PAddr =
- binfo->bi_immr_base + MPC85xx_OPENPIC_OFFSET;
- OpenPIC_Addr = ioremap(OpenPIC_PAddr, MPC85xx_OPENPIC_SIZE);
- OpenPIC_InitSenses = tqm85xx_openpic_initsenses;
- OpenPIC_NumInitSenses = sizeof (tqm85xx_openpic_initsenses);
-
- /* Skip reserved space and internal sources */
- openpic_set_sources(0, 32, OpenPIC_Addr + 0x10200);
-
- /* Map PIC IRQs 0-11 */
- openpic_set_sources(48, 12, OpenPIC_Addr + 0x10000);
-
- /* we let openpic interrupts starting from an offset, to
- * leave space for cascading interrupts underneath.
- */
- openpic_init(MPC85xx_OPENPIC_IRQ_OFFSET);
-
-#ifdef CONFIG_MPC8560
- /* Setup CPM2 PIC */
- cpm2_init_IRQ();
-
- setup_irq(MPC85xx_IRQ_CPM, &cpm2_irqaction);
-#endif /* CONFIG_MPC8560 */
-
- return;
-}
-
-int tqm85xx_show_cpuinfo(struct seq_file *m)
-{
- uint pvid, svid, phid1;
- uint memsize = total_memory;
- bd_t *binfo = (bd_t *) __res;
- unsigned int freq;
-
- /* get the core frequency */
- freq = binfo->bi_intfreq;
-
- pvid = mfspr(SPRN_PVR);
- svid = mfspr(SPRN_SVR);
-
- seq_printf(m, "Vendor\t\t: TQ Components\n");
- seq_printf(m, "Machine\t\t: TQM%s\n", cur_ppc_sys_spec->ppc_sys_name);
- seq_printf(m, "clock\t\t: %dMHz\n", freq / 1000000);
- seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
- seq_printf(m, "SVR\t\t: 0x%x\n", svid);
-
- /* Display cpu Pll setting */
- phid1 = mfspr(SPRN_HID1);
- seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
-
- /* Display the amount of memory */
- seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
-
- return 0;
-}
-
-#if defined(CONFIG_I2C) && defined(CONFIG_SENSORS_DS1337)
-extern ulong ds1337_get_rtc_time(void);
-extern int ds1337_set_rtc_time(unsigned long nowtime);
-
-static int __init
-tqm85xx_rtc_hookup(void)
-{
- struct timespec tv;
-
- ppc_md.set_rtc_time = ds1337_set_rtc_time;
- ppc_md.get_rtc_time = ds1337_get_rtc_time;
-
- tv.tv_nsec = 0;
- tv.tv_sec = (ppc_md.get_rtc_time)();
- do_settimeofday(&tv);
-
- return 0;
-}
-late_initcall(tqm85xx_rtc_hookup);
-#endif
-
-#ifdef CONFIG_PCI
-/*
- * interrupt routing
- */
-int mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
- static char pci_irq_table[][4] =
- /*
- * PCI IDSEL/INTPIN->INTLINE
- * A B C D
- */
- {
- {PIRQA, PIRQB, 0, 0},
- };
-
- const long min_idsel = 0x1c, max_idsel = 0x1c, irqs_per_slot = 4;
- return PCI_IRQ_TABLE_LOOKUP;
-}
-
-int mpc85xx_exclude_device(u_char bus, u_char devfn)
-{
- if (bus == 0 && PCI_SLOT(devfn) == 0)
- return PCIBIOS_DEVICE_NOT_FOUND;
- else
- return PCIBIOS_SUCCESSFUL;
-}
-
-#endif /* CONFIG_PCI */
-
-#ifdef CONFIG_RAPIDIO
-extern void mpc85xx_rio_setup(int law_start, int law_size);
-void platform_rio_init(void)
-{
- /* 512MB RIO LAW at 0xc0000000 */
- mpc85xx_rio_setup(0xc0000000, 0x20000000);
-}
-#endif /* CONFIG_RAPIDIO */
-
-/* ************************************************************************ */
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
- unsigned long r6, unsigned long r7)
-{
- /* parse_bootinfo must always be called first */
- parse_bootinfo(find_bootinfo());
-
- /*
- * If we were passed in a board information, copy it into the
- * residual data area.
- */
- if (r3) {
- memcpy((void *) __res, (void *) (r3 + KERNELBASE),
- sizeof (bd_t));
- }
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) && !defined(CONFIG_MPC8560)
- {
- bd_t *binfo = (bd_t *) __res;
- struct uart_port p;
-
- /* Use the last TLB entry to map CCSRBAR to allow access to DUART regs */
- settlbcam(num_tlbcam_entries - 1, binfo->bi_immr_base,
- binfo->bi_immr_base, MPC85xx_CCSRBAR_SIZE, _PAGE_IO, 0);
-
- memset(&p, 0, sizeof (p));
- p.iotype = UPIO_MEM;
- p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART0_OFFSET;
- p.uartclk = binfo->bi_busfreq;
-
- gen550_init(0, &p);
-
- memset(&p, 0, sizeof (p));
- p.iotype = UPIO_MEM;
- p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART1_OFFSET;
- p.uartclk = binfo->bi_busfreq;
-
- gen550_init(1, &p);
- }
-#endif
-
-#if defined(CONFIG_BLK_DEV_INITRD)
- /*
- * If the init RAM disk has been configured in, and there's a valid
- * starting address for it, set it up.
- */
- if (r4) {
- initrd_start = r4 + KERNELBASE;
- initrd_end = r5 + KERNELBASE;
- }
-#endif /* CONFIG_BLK_DEV_INITRD */
-
- /* Copy the kernel command line arguments to a safe place. */
-
- if (r6) {
- *(char *) (r7 + KERNELBASE) = 0;
- strcpy(cmd_line, (char *) (r6 + KERNELBASE));
- }
-
- identify_ppc_sys_by_id(mfspr(SPRN_SVR));
-
- /* setup the PowerPC module struct */
- ppc_md.setup_arch = tqm85xx_setup_arch;
- ppc_md.show_cpuinfo = tqm85xx_show_cpuinfo;
-
- ppc_md.init_IRQ = tqm85xx_init_IRQ;
- ppc_md.get_irq = openpic_get_irq;
-
- ppc_md.restart = mpc85xx_restart;
- ppc_md.power_off = mpc85xx_power_off;
- ppc_md.halt = mpc85xx_halt;
-
- ppc_md.find_end_of_memory = mpc85xx_find_end_of_memory;
-
- ppc_md.time_init = NULL;
- ppc_md.set_rtc_time = NULL;
- ppc_md.get_rtc_time = NULL;
- ppc_md.calibrate_decr = mpc85xx_calibrate_decr;
-
-#ifndef CONFIG_MPC8560
-#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG)
- ppc_md.progress = gen550_progress;
-#endif /* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */
-#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_KGDB)
- ppc_md.early_serial_map = mpc85xx_early_serial_map;
-#endif /* CONFIG_SERIAL_8250 && CONFIG_KGDB */
-#endif /* CONFIG_MPC8560 */
-
- if (ppc_md.progress)
- ppc_md.progress("tqm85xx_init(): exit", 0);
-
- return;
-}
diff --git a/arch/ppc/platforms/85xx/tqm85xx.h b/arch/ppc/platforms/85xx/tqm85xx.h
deleted file mode 100644
index 57284e6..0000000
--- a/arch/ppc/platforms/85xx/tqm85xx.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * TQM85xx (40/41/55/60) board definitions
- *
- * Copyright (c) 2005 DENX Software Engineering
- * Stefan Roese <sr@denx.de>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-#ifndef __MACH_TQM85XX_H
-#define __MACH_TQM85XX_H
-
-#include <linux/init.h>
-#include <asm/ppcboot.h>
-
-#define BOARD_CCSRBAR ((uint)0xe0000000)
-#define CCSRBAR_SIZE ((uint)1024*1024)
-
-#define CPM_MAP_ADDR (CCSRBAR + MPC85xx_CPM_OFFSET)
-
-#define PCI_CFG_ADDR_OFFSET (0x8000)
-#define PCI_CFG_DATA_OFFSET (0x8004)
-
-/* PCI interrupt controller */
-#define PIRQA MPC85xx_IRQ_EXT2
-#define PIRQB MPC85xx_IRQ_EXT3
-
-#define MPC85XX_PCI1_LOWER_IO 0x00000000
-#define MPC85XX_PCI1_UPPER_IO 0x00ffffff
-
-#define MPC85XX_PCI1_LOWER_MEM 0x80000000
-#define MPC85XX_PCI1_UPPER_MEM 0x9fffffff
-
-#define MPC85XX_PCI1_IO_BASE 0xe2000000
-#define MPC85XX_PCI1_MEM_OFFSET 0x00000000
-
-#define MPC85XX_PCI1_IO_SIZE 0x01000000
-
-#define BASE_BAUD 115200
-
-extern void mpc85xx_setup_hose(void) __init;
-extern void mpc85xx_restart(char *cmd);
-extern void mpc85xx_power_off(void);
-extern void mpc85xx_halt(void);
-extern void mpc85xx_init_IRQ(void) __init;
-extern unsigned long mpc85xx_find_end_of_memory(void) __init;
-extern void mpc85xx_calibrate_decr(void) __init;
-
-#endif /* __MACH_TQM85XX_H */
diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile
index 4d158f3..52ddebe 100644
--- a/arch/ppc/syslib/Makefile
+++ b/arch/ppc/syslib/Makefile
@@ -87,14 +87,6 @@ endif
obj-$(CONFIG_BOOTX_TEXT) += btext.o
obj-$(CONFIG_MPC10X_BRIDGE) += mpc10x_common.o ppc_sys.o
obj-$(CONFIG_MPC10X_OPENPIC) += open_pic.o
-obj-$(CONFIG_85xx) += open_pic.o ppc85xx_common.o ppc85xx_setup.o \
- ppc_sys.o mpc85xx_sys.o \
- mpc85xx_devices.o
-ifeq ($(CONFIG_85xx),y)
-obj-$(CONFIG_PCI) += pci_auto.o
-endif
-obj-$(CONFIG_MPC8548_CDS) += todc_time.o
-obj-$(CONFIG_MPC8555_CDS) += todc_time.o
obj-$(CONFIG_PPC_MPC52xx) += mpc52xx_setup.o mpc52xx_pic.o \
mpc52xx_sys.o mpc52xx_devices.o ppc_sys.o
ifeq ($(CONFIG_PPC_MPC52xx),y)
diff --git a/arch/ppc/syslib/mpc85xx_devices.c b/arch/ppc/syslib/mpc85xx_devices.c
deleted file mode 100644
index 325136e..0000000
--- a/arch/ppc/syslib/mpc85xx_devices.c
+++ /dev/null
@@ -1,826 +0,0 @@
-/*
- * MPC85xx Device descriptions
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * Copyright 2005 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/serial_8250.h>
-#include <linux/fsl_devices.h>
-#include <linux/fs_enet_pd.h>
-#include <asm/mpc85xx.h>
-#include <asm/irq.h>
-#include <asm/ppc_sys.h>
-#include <asm/cpm2.h>
-
-/* We use offsets for IORESOURCE_MEM since we do not know at compile time
- * what CCSRBAR is, will get fixed up by mach_mpc85xx_fixup
- */
-struct gianfar_mdio_data mpc85xx_mdio_pdata = {
-};
-
-static struct gianfar_platform_data mpc85xx_tsec1_pdata = {
- .device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT |
- FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON |
- FSL_GIANFAR_DEV_HAS_MULTI_INTR,
-};
-
-static struct gianfar_platform_data mpc85xx_tsec2_pdata = {
- .device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT |
- FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON |
- FSL_GIANFAR_DEV_HAS_MULTI_INTR,
-};
-
-static struct gianfar_platform_data mpc85xx_etsec1_pdata = {
- .device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT |
- FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON |
- FSL_GIANFAR_DEV_HAS_MULTI_INTR |
- FSL_GIANFAR_DEV_HAS_CSUM | FSL_GIANFAR_DEV_HAS_VLAN |
- FSL_GIANFAR_DEV_HAS_EXTENDED_HASH,
-};
-
-static struct gianfar_platform_data mpc85xx_etsec2_pdata = {
- .device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT |
- FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON |
- FSL_GIANFAR_DEV_HAS_MULTI_INTR |
- FSL_GIANFAR_DEV_HAS_CSUM | FSL_GIANFAR_DEV_HAS_VLAN |
- FSL_GIANFAR_DEV_HAS_EXTENDED_HASH,
-};
-
-static struct gianfar_platform_data mpc85xx_etsec3_pdata = {
- .device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT |
- FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON |
- FSL_GIANFAR_DEV_HAS_MULTI_INTR |
- FSL_GIANFAR_DEV_HAS_CSUM | FSL_GIANFAR_DEV_HAS_VLAN |
- FSL_GIANFAR_DEV_HAS_EXTENDED_HASH,
-};
-
-static struct gianfar_platform_data mpc85xx_etsec4_pdata = {
- .device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT |
- FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON |
- FSL_GIANFAR_DEV_HAS_MULTI_INTR |
- FSL_GIANFAR_DEV_HAS_CSUM | FSL_GIANFAR_DEV_HAS_VLAN |
- FSL_GIANFAR_DEV_HAS_EXTENDED_HASH,
-};
-
-static struct gianfar_platform_data mpc85xx_fec_pdata = {
- .device_flags = 0,
-};
-
-static struct fsl_i2c_platform_data mpc85xx_fsl_i2c_pdata = {
- .device_flags = FSL_I2C_DEV_SEPARATE_DFSRR,
-};
-
-static struct fsl_i2c_platform_data mpc85xx_fsl_i2c2_pdata = {
- .device_flags = FSL_I2C_DEV_SEPARATE_DFSRR,
-};
-
-static struct fs_platform_info mpc85xx_fcc1_pdata = {
- .fs_no = fsid_fcc1,
- .cp_page = CPM_CR_FCC1_PAGE,
- .cp_block = CPM_CR_FCC1_SBLOCK,
-
- .rx_ring = 32,
- .tx_ring = 32,
- .rx_copybreak = 240,
- .use_napi = 0,
- .napi_weight = 17,
-
- .clk_mask = CMX1_CLK_MASK,
- .clk_route = CMX1_CLK_ROUTE,
- .clk_trx = (PC_F1RXCLK | PC_F1TXCLK),
-
- .mem_offset = FCC1_MEM_OFFSET,
-};
-
-static struct fs_platform_info mpc85xx_fcc2_pdata = {
- .fs_no = fsid_fcc2,
- .cp_page = CPM_CR_FCC2_PAGE,
- .cp_block = CPM_CR_FCC2_SBLOCK,
-
- .rx_ring = 32,
- .tx_ring = 32,
- .rx_copybreak = 240,
- .use_napi = 0,
- .napi_weight = 17,
-
- .clk_mask = CMX2_CLK_MASK,
- .clk_route = CMX2_CLK_ROUTE,
- .clk_trx = (PC_F2RXCLK | PC_F2TXCLK),
-
- .mem_offset = FCC2_MEM_OFFSET,
-};
-
-static struct fs_platform_info mpc85xx_fcc3_pdata = {
- .fs_no = fsid_fcc3,
- .cp_page = CPM_CR_FCC3_PAGE,
- .cp_block = CPM_CR_FCC3_SBLOCK,
-
- .rx_ring = 32,
- .tx_ring = 32,
- .rx_copybreak = 240,
- .use_napi = 0,
- .napi_weight = 17,
-
- .clk_mask = CMX3_CLK_MASK,
- .clk_route = CMX3_CLK_ROUTE,
- .clk_trx = (PC_F3RXCLK | PC_F3TXCLK),
-
- .mem_offset = FCC3_MEM_OFFSET,
-};
-
-static struct plat_serial8250_port serial_platform_data[] = {
- [0] = {
- .mapbase = 0x4500,
- .irq = MPC85xx_IRQ_DUART,
- .iotype = UPIO_MEM,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ,
- },
- [1] = {
- .mapbase = 0x4600,
- .irq = MPC85xx_IRQ_DUART,
- .iotype = UPIO_MEM,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ,
- },
- { },
-};
-
-struct platform_device ppc_sys_platform_devices[] = {
- [MPC85xx_TSEC1] = {
- .name = "fsl-gianfar",
- .id = 1,
- .dev.platform_data = &mpc85xx_tsec1_pdata,
- .num_resources = 4,
- .resource = (struct resource[]) {
- {
- .start = MPC85xx_ENET1_OFFSET,
- .end = MPC85xx_ENET1_OFFSET +
- MPC85xx_ENET1_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "tx",
- .start = MPC85xx_IRQ_TSEC1_TX,
- .end = MPC85xx_IRQ_TSEC1_TX,
- .flags = IORESOURCE_IRQ,
- },
- {
- .name = "rx",
- .start = MPC85xx_IRQ_TSEC1_RX,
- .end = MPC85xx_IRQ_TSEC1_RX,
- .flags = IORESOURCE_IRQ,
- },
- {
- .name = "error",
- .start = MPC85xx_IRQ_TSEC1_ERROR,
- .end = MPC85xx_IRQ_TSEC1_ERROR,
- .flags = IORESOURCE_IRQ,
- },
- },
- },
- [MPC85xx_TSEC2] = {
- .name = "fsl-gianfar",
- .id = 2,
- .dev.platform_data = &mpc85xx_tsec2_pdata,
- .num_resources = 4,
- .resource = (struct resource[]) {
- {
- .start = MPC85xx_ENET2_OFFSET,
- .end = MPC85xx_ENET2_OFFSET +
- MPC85xx_ENET2_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "tx",
- .start = MPC85xx_IRQ_TSEC2_TX,
- .end = MPC85xx_IRQ_TSEC2_TX,
- .flags = IORESOURCE_IRQ,
- },
- {
- .name = "rx",
- .start = MPC85xx_IRQ_TSEC2_RX,
- .end = MPC85xx_IRQ_TSEC2_RX,
- .flags = IORESOURCE_IRQ,
- },
- {
- .name = "error",
- .start = MPC85xx_IRQ_TSEC2_ERROR,
- .end = MPC85xx_IRQ_TSEC2_ERROR,
- .flags = IORESOURCE_IRQ,
- },
- },
- },
- [MPC85xx_FEC] = {
- .name = "fsl-gianfar",
- .id = 3,
- .dev.platform_data = &mpc85xx_fec_pdata,
- .num_resources = 2,
- .resource = (struct resource[]) {
- {
- .start = MPC85xx_ENET3_OFFSET,
- .end = MPC85xx_ENET3_OFFSET +
- MPC85xx_ENET3_SIZE - 1,
- .flags = IORESOURCE_MEM,
-
- },
- {
- .start = MPC85xx_IRQ_FEC,
- .end = MPC85xx_IRQ_FEC,
- .flags = IORESOURCE_IRQ,
- },
- },
- },
- [MPC85xx_IIC1] = {
- .name = "fsl-i2c",
- .id = 1,
- .dev.platform_data = &mpc85xx_fsl_i2c_pdata,
- .num_resources = 2,
- .resource = (struct resource[]) {
- {
- .start = MPC85xx_IIC1_OFFSET,
- .end = MPC85xx_IIC1_OFFSET +
- MPC85xx_IIC1_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = MPC85xx_IRQ_IIC1,
- .end = MPC85xx_IRQ_IIC1,
- .flags = IORESOURCE_IRQ,
- },
- },
- },
- [MPC85xx_DMA0] = {
- .name = "fsl-dma",
- .id = 0,
- .num_resources = 2,
- .resource = (struct resource[]) {
- {
- .start = MPC85xx_DMA0_OFFSET,
- .end = MPC85xx_DMA0_OFFSET +
- MPC85xx_DMA0_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = MPC85xx_IRQ_DMA0,
- .end = MPC85xx_IRQ_DMA0,
- .flags = IORESOURCE_IRQ,
- },
- },
- },
- [MPC85xx_DMA1] = {
- .name = "fsl-dma",
- .id = 1,
- .num_resources = 2,
- .resource = (struct resource[]) {
- {
- .start = MPC85xx_DMA1_OFFSET,
- .end = MPC85xx_DMA1_OFFSET +
- MPC85xx_DMA1_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = MPC85xx_IRQ_DMA1,
- .end = MPC85xx_IRQ_DMA1,
- .flags = IORESOURCE_IRQ,
- },
- },
- },
- [MPC85xx_DMA2] = {
- .name = "fsl-dma",
- .id = 2,
- .num_resources = 2,
- .resource = (struct resource[]) {
- {
- .start = MPC85xx_DMA2_OFFSET,
- .end = MPC85xx_DMA2_OFFSET +
- MPC85xx_DMA2_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = MPC85xx_IRQ_DMA2,
- .end = MPC85xx_IRQ_DMA2,
- .flags = IORESOURCE_IRQ,
- },
- },
- },
- [MPC85xx_DMA3] = {
- .name = "fsl-dma",
- .id = 3,
- .num_resources = 2,
- .resource = (struct resource[]) {
- {
- .start = MPC85xx_DMA3_OFFSET,
- .end = MPC85xx_DMA3_OFFSET +
- MPC85xx_DMA3_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = MPC85xx_IRQ_DMA3,
- .end = MPC85xx_IRQ_DMA3,
- .flags = IORESOURCE_IRQ,
- },
- },
- },
- [MPC85xx_DUART] = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev.platform_data = serial_platform_data,
- },
- [MPC85xx_PERFMON] = {
- .name = "fsl-perfmon",
- .id = 1,
- .num_resources = 2,
- .resource = (struct resource[]) {
- {
- .start = MPC85xx_PERFMON_OFFSET,
- .end = MPC85xx_PERFMON_OFFSET +
- MPC85xx_PERFMON_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = MPC85xx_IRQ_PERFMON,
- .end = MPC85xx_IRQ_PERFMON,
- .flags = IORESOURCE_IRQ,
- },
- },
- },
- [MPC85xx_SEC2] = {
- .name = "fsl-sec2",
- .id = 1,
- .num_resources = 2,
- .resource = (struct resource[]) {
- {
- .start = MPC85xx_SEC2_OFFSET,
- .end = MPC85xx_SEC2_OFFSET +
- MPC85xx_SEC2_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = MPC85xx_IRQ_SEC2,
- .end = MPC85xx_IRQ_SEC2,
- .flags = IORESOURCE_IRQ,
- },
- },
- },
- [MPC85xx_CPM_FCC1] = {
- .name = "fsl-cpm-fcc",
- .id = 1,
- .num_resources = 4,
- .dev.platform_data = &mpc85xx_fcc1_pdata,
- .resource = (struct resource[]) {
- {
- .name = "fcc_regs",
- .start = 0x91300,
- .end = 0x9131F,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "fcc_regs_c",
- .start = 0x91380,
- .end = 0x9139F,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "fcc_pram",
- .start = 0x88400,
- .end = 0x884ff,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = SIU_INT_FCC1,
- .end = SIU_INT_FCC1,
- .flags = IORESOURCE_IRQ,
- },
- },
- },
- [MPC85xx_CPM_FCC2] = {
- .name = "fsl-cpm-fcc",
- .id = 2,
- .num_resources = 4,
- .dev.platform_data = &mpc85xx_fcc2_pdata,
- .resource = (struct resource[]) {
- {
- .name = "fcc_regs",
- .start = 0x91320,
- .end = 0x9133F,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "fcc_regs_c",
- .start = 0x913A0,
- .end = 0x913CF,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "fcc_pram",
- .start = 0x88500,
- .end = 0x885ff,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = SIU_INT_FCC2,
- .end = SIU_INT_FCC2,
- .flags = IORESOURCE_IRQ,
- },
- },
- },
- [MPC85xx_CPM_FCC3] = {
- .name = "fsl-cpm-fcc",
- .id = 3,
- .num_resources = 4,
- .dev.platform_data = &mpc85xx_fcc3_pdata,
- .resource = (struct resource[]) {
- {
- .name = "fcc_regs",
- .start = 0x91340,
- .end = 0x9135F,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "fcc_regs_c",
- .start = 0x913D0,
- .end = 0x913FF,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "fcc_pram",
- .start = 0x88600,
- .end = 0x886ff,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = SIU_INT_FCC3,
- .end = SIU_INT_FCC3,
- .flags = IORESOURCE_IRQ,
- },
- },
- },
- [MPC85xx_CPM_I2C] = {
- .name = "fsl-cpm-i2c",
- .id = 1,
- .num_resources = 2,
- .resource = (struct resource[]) {
- {
- .start = 0x91860,
- .end = 0x918BF,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = SIU_INT_I2C,
- .end = SIU_INT_I2C,
- .flags = IORESOURCE_IRQ,
- },
- },
- },
- [MPC85xx_CPM_SCC1] = {
- .name = "fsl-cpm-scc",
- .id = 1,
- .num_resources = 2,
- .resource = (struct resource[]) {
- {
- .start = 0x91A00,
- .end = 0x91A1F,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = SIU_INT_SCC1,
- .end = SIU_INT_SCC1,
- .flags = IORESOURCE_IRQ,
- },
- },
- },
- [MPC85xx_CPM_SCC2] = {
- .name = "fsl-cpm-scc",
- .id = 2,
- .num_resources = 2,
- .resource = (struct resource[]) {
- {
- .start = 0x91A20,
- .end = 0x91A3F,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = SIU_INT_SCC2,
- .end = SIU_INT_SCC2,
- .flags = IORESOURCE_IRQ,
- },
- },
- },
- [MPC85xx_CPM_SCC3] = {
- .name = "fsl-cpm-scc",
- .id = 3,
- .num_resources = 2,
- .resource = (struct resource[]) {
- {
- .start = 0x91A40,
- .end = 0x91A5F,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = SIU_INT_SCC3,
- .end = SIU_INT_SCC3,
- .flags = IORESOURCE_IRQ,
- },
- },
- },
- [MPC85xx_CPM_SCC4] = {
- .name = "fsl-cpm-scc",
- .id = 4,
- .num_resources = 2,
- .resource = (struct resource[]) {
- {
- .start = 0x91A60,
- .end = 0x91A7F,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = SIU_INT_SCC4,
- .end = SIU_INT_SCC4,
- .flags = IORESOURCE_IRQ,
- },
- },
- },
- [MPC85xx_CPM_SPI] = {
- .name = "fsl-cpm-spi",
- .id = 1,
- .num_resources = 2,
- .resource = (struct resource[]) {
- {
- .start = 0x91AA0,
- .end = 0x91AFF,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = SIU_INT_SPI,
- .end = SIU_INT_SPI,
- .flags = IORESOURCE_IRQ,
- },
- },
- },
- [MPC85xx_CPM_MCC1] = {
- .name = "fsl-cpm-mcc",
- .id = 1,
- .num_resources = 2,
- .resource = (struct resource[]) {
- {
- .start = 0x91B30,
- .end = 0x91B3F,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = SIU_INT_MCC1,
- .end = SIU_INT_MCC1,
- .flags = IORESOURCE_IRQ,
- },
- },
- },
- [MPC85xx_CPM_MCC2] = {
- .name = "fsl-cpm-mcc",
- .id = 2,
- .num_resources = 2,
- .resource = (struct resource[]) {
- {
- .start = 0x91B50,
- .end = 0x91B5F,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = SIU_INT_MCC2,
- .end = SIU_INT_MCC2,
- .flags = IORESOURCE_IRQ,
- },
- },
- },
- [MPC85xx_CPM_SMC1] = {
- .name = "fsl-cpm-smc",
- .id = 1,
- .num_resources = 2,
- .resource = (struct resource[]) {
- {
- .start = 0x91A80,
- .end = 0x91A8F,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = SIU_INT_SMC1,
- .end = SIU_INT_SMC1,
- .flags = IORESOURCE_IRQ,
- },
- },
- },
- [MPC85xx_CPM_SMC2] = {
- .name = "fsl-cpm-smc",
- .id = 2,
- .num_resources = 2,
- .resource = (struct resource[]) {
- {
- .start = 0x91A90,
- .end = 0x91A9F,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = SIU_INT_SMC2,
- .end = SIU_INT_SMC2,
- .flags = IORESOURCE_IRQ,
- },
- },
- },
- [MPC85xx_CPM_USB] = {
- .name = "fsl-cpm-usb",
- .id = 2,
- .num_resources = 2,
- .resource = (struct resource[]) {
- {
- .start = 0x91B60,
- .end = 0x91B7F,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = SIU_INT_USB,
- .end = SIU_INT_USB,
- .flags = IORESOURCE_IRQ,
- },
- },
- },
- [MPC85xx_eTSEC1] = {
- .name = "fsl-gianfar",
- .id = 1,
- .dev.platform_data = &mpc85xx_etsec1_pdata,
- .num_resources = 4,
- .resource = (struct resource[]) {
- {
- .start = MPC85xx_ENET1_OFFSET,
- .end = MPC85xx_ENET1_OFFSET +
- MPC85xx_ENET1_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "tx",
- .start = MPC85xx_IRQ_TSEC1_TX,
- .end = MPC85xx_IRQ_TSEC1_TX,
- .flags = IORESOURCE_IRQ,
- },
- {
- .name = "rx",
- .start = MPC85xx_IRQ_TSEC1_RX,
- .end = MPC85xx_IRQ_TSEC1_RX,
- .flags = IORESOURCE_IRQ,
- },
- {
- .name = "error",
- .start = MPC85xx_IRQ_TSEC1_ERROR,
- .end = MPC85xx_IRQ_TSEC1_ERROR,
- .flags = IORESOURCE_IRQ,
- },
- },
- },
- [MPC85xx_eTSEC2] = {
- .name = "fsl-gianfar",
- .id = 2,
- .dev.platform_data = &mpc85xx_etsec2_pdata,
- .num_resources = 4,
- .resource = (struct resource[]) {
- {
- .start = MPC85xx_ENET2_OFFSET,
- .end = MPC85xx_ENET2_OFFSET +
- MPC85xx_ENET2_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "tx",
- .start = MPC85xx_IRQ_TSEC2_TX,
- .end = MPC85xx_IRQ_TSEC2_TX,
- .flags = IORESOURCE_IRQ,
- },
- {
- .name = "rx",
- .start = MPC85xx_IRQ_TSEC2_RX,
- .end = MPC85xx_IRQ_TSEC2_RX,
- .flags = IORESOURCE_IRQ,
- },
- {
- .name = "error",
- .start = MPC85xx_IRQ_TSEC2_ERROR,
- .end = MPC85xx_IRQ_TSEC2_ERROR,
- .flags = IORESOURCE_IRQ,
- },
- },
- },
- [MPC85xx_eTSEC3] = {
- .name = "fsl-gianfar",
- .id = 3,
- .dev.platform_data = &mpc85xx_etsec3_pdata,
- .num_resources = 4,
- .resource = (struct resource[]) {
- {
- .start = MPC85xx_ENET3_OFFSET,
- .end = MPC85xx_ENET3_OFFSET +
- MPC85xx_ENET3_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "tx",
- .start = MPC85xx_IRQ_TSEC3_TX,
- .end = MPC85xx_IRQ_TSEC3_TX,
- .flags = IORESOURCE_IRQ,
- },
- {
- .name = "rx",
- .start = MPC85xx_IRQ_TSEC3_RX,
- .end = MPC85xx_IRQ_TSEC3_RX,
- .flags = IORESOURCE_IRQ,
- },
- {
- .name = "error",
- .start = MPC85xx_IRQ_TSEC3_ERROR,
- .end = MPC85xx_IRQ_TSEC3_ERROR,
- .flags = IORESOURCE_IRQ,
- },
- },
- },
- [MPC85xx_eTSEC4] = {
- .name = "fsl-gianfar",
- .id = 4,
- .dev.platform_data = &mpc85xx_etsec4_pdata,
- .num_resources = 4,
- .resource = (struct resource[]) {
- {
- .start = 0x27000,
- .end = 0x27fff,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "tx",
- .start = MPC85xx_IRQ_TSEC4_TX,
- .end = MPC85xx_IRQ_TSEC4_TX,
- .flags = IORESOURCE_IRQ,
- },
- {
- .name = "rx",
- .start = MPC85xx_IRQ_TSEC4_RX,
- .end = MPC85xx_IRQ_TSEC4_RX,
- .flags = IORESOURCE_IRQ,
- },
- {
- .name = "error",
- .start = MPC85xx_IRQ_TSEC4_ERROR,
- .end = MPC85xx_IRQ_TSEC4_ERROR,
- .flags = IORESOURCE_IRQ,
- },
- },
- },
- [MPC85xx_IIC2] = {
- .name = "fsl-i2c",
- .id = 2,
- .dev.platform_data = &mpc85xx_fsl_i2c2_pdata,
- .num_resources = 2,
- .resource = (struct resource[]) {
- {
- .start = 0x03100,
- .end = 0x031ff,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = MPC85xx_IRQ_IIC1,
- .end = MPC85xx_IRQ_IIC1,
- .flags = IORESOURCE_IRQ,
- },
- },
- },
- [MPC85xx_MDIO] = {
- .name = "fsl-gianfar_mdio",
- .id = 0,
- .dev.platform_data = &mpc85xx_mdio_pdata,
- .num_resources = 1,
- .resource = (struct resource[]) {
- {
- .start = 0x24520,
- .end = 0x2453f,
- .flags = IORESOURCE_MEM,
- },
- },
- },
-};
-
-static int __init mach_mpc85xx_fixup(struct platform_device *pdev)
-{
- ppc_sys_fixup_mem_resource(pdev, CCSRBAR);
- return 0;
-}
-
-static int __init mach_mpc85xx_init(void)
-{
- ppc_sys_device_fixup = mach_mpc85xx_fixup;
- return 0;
-}
-
-postcore_initcall(mach_mpc85xx_init);
diff --git a/arch/ppc/syslib/mpc85xx_sys.c b/arch/ppc/syslib/mpc85xx_sys.c
deleted file mode 100644
index d96a93db..0000000
--- a/arch/ppc/syslib/mpc85xx_sys.c
+++ /dev/null
@@ -1,233 +0,0 @@
-/*
- * MPC85xx System descriptions
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * Copyright 2005 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <asm/ppc_sys.h>
-
-struct ppc_sys_spec *cur_ppc_sys_spec;
-struct ppc_sys_spec ppc_sys_specs[] = {
- {
- .ppc_sys_name = "8540",
- .mask = 0xFFFF0000,
- .value = 0x80300000,
- .num_devices = 11,
- .device_list = (enum ppc_sys_devices[])
- {
- MPC85xx_TSEC1, MPC85xx_TSEC2, MPC85xx_FEC, MPC85xx_IIC1,
- MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
- MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_MDIO,
- },
- },
- {
- .ppc_sys_name = "8560",
- .mask = 0xFFFF0000,
- .value = 0x80700000,
- .num_devices = 20,
- .device_list = (enum ppc_sys_devices[])
- {
- MPC85xx_TSEC1, MPC85xx_TSEC2, MPC85xx_IIC1,
- MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
- MPC85xx_PERFMON,
- MPC85xx_CPM_SPI, MPC85xx_CPM_I2C, MPC85xx_CPM_SCC1,
- MPC85xx_CPM_SCC2, MPC85xx_CPM_SCC3, MPC85xx_CPM_SCC4,
- MPC85xx_CPM_FCC1, MPC85xx_CPM_FCC2, MPC85xx_CPM_FCC3,
- MPC85xx_CPM_MCC1, MPC85xx_CPM_MCC2, MPC85xx_MDIO,
- },
- },
- {
- .ppc_sys_name = "8541",
- .mask = 0xFFFF0000,
- .value = 0x80720000,
- .num_devices = 14,
- .device_list = (enum ppc_sys_devices[])
- {
- MPC85xx_TSEC1, MPC85xx_TSEC2, MPC85xx_IIC1,
- MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
- MPC85xx_PERFMON, MPC85xx_DUART,
- MPC85xx_CPM_SPI, MPC85xx_CPM_I2C,
- MPC85xx_CPM_FCC1, MPC85xx_CPM_FCC2,
- MPC85xx_MDIO,
- },
- },
- {
- .ppc_sys_name = "8541E",
- .mask = 0xFFFF0000,
- .value = 0x807A0000,
- .num_devices = 15,
- .device_list = (enum ppc_sys_devices[])
- {
- MPC85xx_TSEC1, MPC85xx_TSEC2, MPC85xx_IIC1,
- MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
- MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2,
- MPC85xx_CPM_SPI, MPC85xx_CPM_I2C,
- MPC85xx_CPM_FCC1, MPC85xx_CPM_FCC2,
- MPC85xx_MDIO,
- },
- },
- {
- .ppc_sys_name = "8555",
- .mask = 0xFFFF0000,
- .value = 0x80710000,
- .num_devices = 20,
- .device_list = (enum ppc_sys_devices[])
- {
- MPC85xx_TSEC1, MPC85xx_TSEC2, MPC85xx_IIC1,
- MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
- MPC85xx_PERFMON, MPC85xx_DUART,
- MPC85xx_CPM_SPI, MPC85xx_CPM_I2C, MPC85xx_CPM_SCC1,
- MPC85xx_CPM_SCC2, MPC85xx_CPM_SCC3,
- MPC85xx_CPM_FCC1, MPC85xx_CPM_FCC2,
- MPC85xx_CPM_SMC1, MPC85xx_CPM_SMC2,
- MPC85xx_CPM_USB,
- MPC85xx_MDIO,
- },
- },
- {
- .ppc_sys_name = "8555E",
- .mask = 0xFFFF0000,
- .value = 0x80790000,
- .num_devices = 21,
- .device_list = (enum ppc_sys_devices[])
- {
- MPC85xx_TSEC1, MPC85xx_TSEC2, MPC85xx_IIC1,
- MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
- MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2,
- MPC85xx_CPM_SPI, MPC85xx_CPM_I2C, MPC85xx_CPM_SCC1,
- MPC85xx_CPM_SCC2, MPC85xx_CPM_SCC3,
- MPC85xx_CPM_FCC1, MPC85xx_CPM_FCC2,
- MPC85xx_CPM_SMC1, MPC85xx_CPM_SMC2,
- MPC85xx_CPM_USB,
- MPC85xx_MDIO,
- },
- },
- /* SVRs on 8548 rev1.0 matches for 8548/8547/8545 */
- {
- .ppc_sys_name = "8548E",
- .mask = 0xFFFF00F0,
- .value = 0x80390010,
- .num_devices = 14,
- .device_list = (enum ppc_sys_devices[])
- {
- MPC85xx_eTSEC1, MPC85xx_eTSEC2, MPC85xx_eTSEC3,
- MPC85xx_eTSEC4, MPC85xx_IIC1, MPC85xx_IIC2,
- MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
- MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2,
- MPC85xx_MDIO,
- },
- },
- {
- .ppc_sys_name = "8548",
- .mask = 0xFFFF00F0,
- .value = 0x80310010,
- .num_devices = 13,
- .device_list = (enum ppc_sys_devices[])
- {
- MPC85xx_eTSEC1, MPC85xx_eTSEC2, MPC85xx_eTSEC3,
- MPC85xx_eTSEC4, MPC85xx_IIC1, MPC85xx_IIC2,
- MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
- MPC85xx_PERFMON, MPC85xx_DUART,
- MPC85xx_MDIO,
- },
- },
- {
- .ppc_sys_name = "8547E",
- .mask = 0xFFFF00F0,
- .value = 0x80390010,
- .num_devices = 14,
- .device_list = (enum ppc_sys_devices[])
- {
- MPC85xx_eTSEC1, MPC85xx_eTSEC2, MPC85xx_eTSEC3,
- MPC85xx_eTSEC4, MPC85xx_IIC1, MPC85xx_IIC2,
- MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
- MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2,
- MPC85xx_MDIO,
- },
- },
- {
- .ppc_sys_name = "8547",
- .mask = 0xFFFF00F0,
- .value = 0x80310010,
- .num_devices = 13,
- .device_list = (enum ppc_sys_devices[])
- {
- MPC85xx_eTSEC1, MPC85xx_eTSEC2, MPC85xx_eTSEC3,
- MPC85xx_eTSEC4, MPC85xx_IIC1, MPC85xx_IIC2,
- MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
- MPC85xx_PERFMON, MPC85xx_DUART,
- MPC85xx_MDIO,
- },
- },
- {
- .ppc_sys_name = "8545E",
- .mask = 0xFFFF00F0,
- .value = 0x80390010,
- .num_devices = 12,
- .device_list = (enum ppc_sys_devices[])
- {
- MPC85xx_eTSEC1, MPC85xx_eTSEC2,
- MPC85xx_IIC1, MPC85xx_IIC2,
- MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
- MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2,
- MPC85xx_MDIO,
- },
- },
- {
- .ppc_sys_name = "8545",
- .mask = 0xFFFF00F0,
- .value = 0x80310010,
- .num_devices = 11,
- .device_list = (enum ppc_sys_devices[])
- {
- MPC85xx_eTSEC1, MPC85xx_eTSEC2,
- MPC85xx_IIC1, MPC85xx_IIC2,
- MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
- MPC85xx_PERFMON, MPC85xx_DUART,
- MPC85xx_MDIO,
- },
- },
- {
- .ppc_sys_name = "8543E",
- .mask = 0xFFFF00F0,
- .value = 0x803A0010,
- .num_devices = 12,
- .device_list = (enum ppc_sys_devices[])
- {
- MPC85xx_eTSEC1, MPC85xx_eTSEC2,
- MPC85xx_IIC1, MPC85xx_IIC2,
- MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
- MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2,
- MPC85xx_MDIO,
- },
- },
- {
- .ppc_sys_name = "8543",
- .mask = 0xFFFF00F0,
- .value = 0x80320010,
- .num_devices = 11,
- .device_list = (enum ppc_sys_devices[])
- {
- MPC85xx_eTSEC1, MPC85xx_eTSEC2,
- MPC85xx_IIC1, MPC85xx_IIC2,
- MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
- MPC85xx_PERFMON, MPC85xx_DUART,
- MPC85xx_MDIO,
- },
- },
- { /* default match */
- .ppc_sys_name = "",
- .mask = 0x00000000,
- .value = 0x00000000,
- },
-};
diff --git a/arch/ppc/syslib/ocp.c b/arch/ppc/syslib/ocp.c
index d42d408..ac80370 100644
--- a/arch/ppc/syslib/ocp.c
+++ b/arch/ppc/syslib/ocp.c
@@ -20,7 +20,7 @@
* of peripherals are found on embedded SoC (System On a Chip)
* processors or highly integrated system controllers that have
* a host bridge and many peripherals. Common examples where
- * this is already used include the PPC4xx, PPC85xx, MPC52xx,
+ * this is already used include the PPC4xx, MPC52xx,
* and MV64xxx parts.
*
* This subsystem creates a standard OCP bus type within the
diff --git a/arch/ppc/syslib/open_pic.c b/arch/ppc/syslib/open_pic.c
index 18ec947..780a3b9 100644
--- a/arch/ppc/syslib/open_pic.c
+++ b/arch/ppc/syslib/open_pic.c
@@ -24,7 +24,7 @@
#include "open_pic_defs.h"
-#if defined(CONFIG_PRPMC800) || defined(CONFIG_85xx)
+#if defined(CONFIG_PRPMC800)
#define OPENPIC_BIG_ENDIAN
#endif
diff --git a/arch/ppc/syslib/ppc85xx_common.c b/arch/ppc/syslib/ppc85xx_common.c
deleted file mode 100644
index e5ac699..0000000
--- a/arch/ppc/syslib/ppc85xx_common.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * MPC85xx support routines
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * Copyright 2004 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/init.h>
-
-#include <asm/mpc85xx.h>
-#include <asm/mmu.h>
-
-/* ************************************************************************ */
-/* Return the value of CCSRBAR for the current board */
-
-phys_addr_t
-get_ccsrbar(void)
-{
- return BOARD_CCSRBAR;
-}
-
-EXPORT_SYMBOL(get_ccsrbar);
-
-/* For now this is a pass through */
-phys_addr_t fixup_bigphys_addr(phys_addr_t addr, phys_addr_t size)
-{
- return addr;
-};
-EXPORT_SYMBOL(fixup_bigphys_addr);
-
diff --git a/arch/ppc/syslib/ppc85xx_common.h b/arch/ppc/syslib/ppc85xx_common.h
deleted file mode 100644
index 4fc4054..0000000
--- a/arch/ppc/syslib/ppc85xx_common.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * MPC85xx support routines
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * Copyright 2004 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __PPC_SYSLIB_PPC85XX_COMMON_H
-#define __PPC_SYSLIB_PPC85XX_COMMON_H
-
-#include <linux/init.h>
-
-/* Provide access to ccsrbar for any modules, etc */
-phys_addr_t get_ccsrbar(void);
-
-#endif /* __PPC_SYSLIB_PPC85XX_COMMON_H */
diff --git a/arch/ppc/syslib/ppc85xx_setup.c b/arch/ppc/syslib/ppc85xx_setup.c
deleted file mode 100644
index 2475ec6..0000000
--- a/arch/ppc/syslib/ppc85xx_setup.c
+++ /dev/null
@@ -1,367 +0,0 @@
-/*
- * MPC85XX common board code
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * Copyright 2004 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/serial.h>
-#include <linux/tty.h> /* for linux/serial_core.h */
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-
-#include <asm/time.h>
-#include <asm/mpc85xx.h>
-#include <asm/immap_85xx.h>
-#include <asm/mmu.h>
-#include <asm/ppc_sys.h>
-#include <asm/kgdb.h>
-#include <asm/machdep.h>
-
-#include <syslib/ppc85xx_setup.h>
-
-extern void abort(void);
-
-/* Return the amount of memory */
-unsigned long __init
-mpc85xx_find_end_of_memory(void)
-{
- bd_t *binfo;
-
- binfo = (bd_t *) __res;
-
- return binfo->bi_memsize;
-}
-
-/* The decrementer counts at the system (internal) clock freq divided by 8 */
-void __init
-mpc85xx_calibrate_decr(void)
-{
- bd_t *binfo = (bd_t *) __res;
- unsigned int freq, divisor;
-
- /* get the core frequency */
- freq = binfo->bi_busfreq;
-
- /* The timebase is updated every 8 bus clocks, HID0[SEL_TBCLK] = 0 */
- divisor = 8;
- tb_ticks_per_jiffy = freq / divisor / HZ;
- tb_to_us = mulhwu_scale_factor(freq / divisor, 1000000);
-
- /* Set the time base to zero */
- mtspr(SPRN_TBWL, 0);
- mtspr(SPRN_TBWU, 0);
-
- /* Clear any pending timer interrupts */
- mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS);
-
- /* Enable decrementer interrupt */
- mtspr(SPRN_TCR, TCR_DIE);
-}
-
-#ifdef CONFIG_SERIAL_8250
-void __init
-mpc85xx_early_serial_map(void)
-{
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
- struct uart_port serial_req;
-#endif
- struct plat_serial8250_port *pdata;
- bd_t *binfo = (bd_t *) __res;
- pdata = (struct plat_serial8250_port *) ppc_sys_get_pdata(MPC85xx_DUART);
-
- /* Setup serial port access */
- pdata[0].uartclk = binfo->bi_busfreq;
- pdata[0].mapbase += binfo->bi_immr_base;
- pdata[0].membase = ioremap(pdata[0].mapbase, MPC85xx_UART0_SIZE);
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
- memset(&serial_req, 0, sizeof (serial_req));
- serial_req.iotype = UPIO_MEM;
- serial_req.mapbase = pdata[0].mapbase;
- serial_req.membase = pdata[0].membase;
- serial_req.regshift = 0;
-
- gen550_init(0, &serial_req);
-#endif
-
- pdata[1].uartclk = binfo->bi_busfreq;
- pdata[1].mapbase += binfo->bi_immr_base;
- pdata[1].membase = ioremap(pdata[1].mapbase, MPC85xx_UART0_SIZE);
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
- /* Assume gen550_init() doesn't modify serial_req */
- serial_req.mapbase = pdata[1].mapbase;
- serial_req.membase = pdata[1].membase;
-
- gen550_init(1, &serial_req);
-#endif
-}
-#endif
-
-void
-mpc85xx_restart(char *cmd)
-{
- local_irq_disable();
- abort();
-}
-
-void
-mpc85xx_power_off(void)
-{
- local_irq_disable();
- for(;;);
-}
-
-void
-mpc85xx_halt(void)
-{
- local_irq_disable();
- for(;;);
-}
-
-#ifdef CONFIG_PCI
-
-#if defined(CONFIG_MPC8555_CDS) || defined(CONFIG_MPC8548_CDS)
-extern void mpc85xx_cds_enable_via(struct pci_controller *hose);
-extern void mpc85xx_cds_fixup_via(struct pci_controller *hose);
-#endif
-
-static void __init
-mpc85xx_setup_pci1(struct pci_controller *hose)
-{
- volatile struct ccsr_pci *pci;
- volatile struct ccsr_guts *guts;
- unsigned short temps;
- bd_t *binfo = (bd_t *) __res;
-
- pci = ioremap(binfo->bi_immr_base + MPC85xx_PCI1_OFFSET,
- MPC85xx_PCI1_SIZE);
-
- guts = ioremap(binfo->bi_immr_base + MPC85xx_GUTS_OFFSET,
- MPC85xx_GUTS_SIZE);
-
- early_read_config_word(hose, 0, 0, PCI_COMMAND, &temps);
- temps |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
- early_write_config_word(hose, 0, 0, PCI_COMMAND, temps);
-
-#define PORDEVSR_PCI (0x00800000) /* PCI Mode */
- if (guts->pordevsr & PORDEVSR_PCI) {
- early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0x80);
- } else {
- /* PCI-X init */
- temps = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ
- | PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E;
- early_write_config_word(hose, 0, 0, PCIX_COMMAND, temps);
- }
-
- /* Disable all windows (except powar0 since its ignored) */
- pci->powar1 = 0;
- pci->powar2 = 0;
- pci->powar3 = 0;
- pci->powar4 = 0;
- pci->piwar1 = 0;
- pci->piwar2 = 0;
- pci->piwar3 = 0;
-
- /* Setup Phys:PCI 1:1 outbound mem window @ MPC85XX_PCI1_LOWER_MEM */
- pci->potar1 = (MPC85XX_PCI1_LOWER_MEM >> 12) & 0x000fffff;
- pci->potear1 = 0x00000000;
- pci->powbar1 = (MPC85XX_PCI1_LOWER_MEM >> 12) & 0x000fffff;
- /* Enable, Mem R/W */
- pci->powar1 = 0x80044000 |
- (__ilog2(MPC85XX_PCI1_UPPER_MEM - MPC85XX_PCI1_LOWER_MEM + 1) - 1);
-
- /* Setup outbound IO windows @ MPC85XX_PCI1_IO_BASE */
- pci->potar2 = (MPC85XX_PCI1_LOWER_IO >> 12) & 0x000fffff;
- pci->potear2 = 0x00000000;
- pci->powbar2 = (MPC85XX_PCI1_IO_BASE >> 12) & 0x000fffff;
- /* Enable, IO R/W */
- pci->powar2 = 0x80088000 | (__ilog2(MPC85XX_PCI1_IO_SIZE) - 1);
-
- /* Setup 2G inbound Memory Window @ 0 */
- pci->pitar1 = 0x00000000;
- pci->piwbar1 = 0x00000000;
- pci->piwar1 = 0xa0f5501e; /* Enable, Prefetch, Local
- Mem, Snoop R/W, 2G */
-}
-
-
-extern int mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin);
-extern int mpc85xx_exclude_device(u_char bus, u_char devfn);
-
-#ifdef CONFIG_85xx_PCI2
-static void __init
-mpc85xx_setup_pci2(struct pci_controller *hose)
-{
- volatile struct ccsr_pci *pci;
- unsigned short temps;
- bd_t *binfo = (bd_t *) __res;
-
- pci = ioremap(binfo->bi_immr_base + MPC85xx_PCI2_OFFSET,
- MPC85xx_PCI2_SIZE);
-
- early_read_config_word(hose, hose->bus_offset, 0, PCI_COMMAND, &temps);
- temps |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
- early_write_config_word(hose, hose->bus_offset, 0, PCI_COMMAND, temps);
- early_write_config_byte(hose, hose->bus_offset, 0, PCI_LATENCY_TIMER, 0x80);
-
- /* Disable all windows (except powar0 since its ignored) */
- pci->powar1 = 0;
- pci->powar2 = 0;
- pci->powar3 = 0;
- pci->powar4 = 0;
- pci->piwar1 = 0;
- pci->piwar2 = 0;
- pci->piwar3 = 0;
-
- /* Setup Phys:PCI 1:1 outbound mem window @ MPC85XX_PCI2_LOWER_MEM */
- pci->potar1 = (MPC85XX_PCI2_LOWER_MEM >> 12) & 0x000fffff;
- pci->potear1 = 0x00000000;
- pci->powbar1 = (MPC85XX_PCI2_LOWER_MEM >> 12) & 0x000fffff;
- /* Enable, Mem R/W */
- pci->powar1 = 0x80044000 |
- (__ilog2(MPC85XX_PCI2_UPPER_MEM - MPC85XX_PCI2_LOWER_MEM + 1) - 1);
-
- /* Setup outbound IO windows @ MPC85XX_PCI2_IO_BASE */
- pci->potar2 = (MPC85XX_PCI2_LOWER_IO >> 12) & 0x000fffff;
- pci->potear2 = 0x00000000;
- pci->powbar2 = (MPC85XX_PCI2_IO_BASE >> 12) & 0x000fffff;
- /* Enable, IO R/W */
- pci->powar2 = 0x80088000 | (__ilog2(MPC85XX_PCI2_IO_SIZE) - 1);
-
- /* Setup 2G inbound Memory Window @ 0 */
- pci->pitar1 = 0x00000000;
- pci->piwbar1 = 0x00000000;
- pci->piwar1 = 0xa0f5501e; /* Enable, Prefetch, Local
- Mem, Snoop R/W, 2G */
-}
-#endif /* CONFIG_85xx_PCI2 */
-
-int mpc85xx_pci1_last_busno = 0;
-
-void __init
-mpc85xx_setup_hose(void)
-{
- struct pci_controller *hose_a;
-#ifdef CONFIG_85xx_PCI2
- struct pci_controller *hose_b;
-#endif
- bd_t *binfo = (bd_t *) __res;
-
- hose_a = pcibios_alloc_controller();
-
- if (!hose_a)
- return;
-
- ppc_md.pci_swizzle = common_swizzle;
- ppc_md.pci_map_irq = mpc85xx_map_irq;
-
- hose_a->first_busno = 0;
- hose_a->bus_offset = 0;
- hose_a->last_busno = 0xff;
-
- setup_indirect_pci(hose_a, binfo->bi_immr_base + PCI1_CFG_ADDR_OFFSET,
- binfo->bi_immr_base + PCI1_CFG_DATA_OFFSET);
- hose_a->set_cfg_type = 1;
-
- mpc85xx_setup_pci1(hose_a);
-
- hose_a->pci_mem_offset = MPC85XX_PCI1_MEM_OFFSET;
- hose_a->mem_space.start = MPC85XX_PCI1_LOWER_MEM;
- hose_a->mem_space.end = MPC85XX_PCI1_UPPER_MEM;
-
- hose_a->io_space.start = MPC85XX_PCI1_LOWER_IO;
- hose_a->io_space.end = MPC85XX_PCI1_UPPER_IO;
- hose_a->io_base_phys = MPC85XX_PCI1_IO_BASE;
-#ifdef CONFIG_85xx_PCI2
- hose_a->io_base_virt = ioremap(MPC85XX_PCI1_IO_BASE,
- MPC85XX_PCI1_IO_SIZE +
- MPC85XX_PCI2_IO_SIZE);
-#else
- hose_a->io_base_virt = ioremap(MPC85XX_PCI1_IO_BASE,
- MPC85XX_PCI1_IO_SIZE);
-#endif
- isa_io_base = (unsigned long)hose_a->io_base_virt;
-
- /* setup resources */
- pci_init_resource(&hose_a->mem_resources[0],
- MPC85XX_PCI1_LOWER_MEM,
- MPC85XX_PCI1_UPPER_MEM,
- IORESOURCE_MEM, "PCI1 host bridge");
-
- pci_init_resource(&hose_a->io_resource,
- MPC85XX_PCI1_LOWER_IO,
- MPC85XX_PCI1_UPPER_IO,
- IORESOURCE_IO, "PCI1 host bridge");
-
- ppc_md.pci_exclude_device = mpc85xx_exclude_device;
-
-#if defined(CONFIG_MPC8555_CDS) || defined(CONFIG_MPC8548_CDS)
- /* Pre pciauto_bus_scan VIA init */
- mpc85xx_cds_enable_via(hose_a);
-#endif
-
- hose_a->last_busno = pciauto_bus_scan(hose_a, hose_a->first_busno);
-
-#if defined(CONFIG_MPC8555_CDS) || defined(CONFIG_MPC8548_CDS)
- /* Post pciauto_bus_scan VIA fixup */
- mpc85xx_cds_fixup_via(hose_a);
-#endif
-
-#ifdef CONFIG_85xx_PCI2
- hose_b = pcibios_alloc_controller();
-
- if (!hose_b)
- return;
-
- hose_b->bus_offset = hose_a->last_busno + 1;
- hose_b->first_busno = hose_a->last_busno + 1;
- hose_b->last_busno = 0xff;
-
- setup_indirect_pci(hose_b, binfo->bi_immr_base + PCI2_CFG_ADDR_OFFSET,
- binfo->bi_immr_base + PCI2_CFG_DATA_OFFSET);
- hose_b->set_cfg_type = 1;
-
- mpc85xx_setup_pci2(hose_b);
-
- hose_b->pci_mem_offset = MPC85XX_PCI2_MEM_OFFSET;
- hose_b->mem_space.start = MPC85XX_PCI2_LOWER_MEM;
- hose_b->mem_space.end = MPC85XX_PCI2_UPPER_MEM;
-
- hose_b->io_space.start = MPC85XX_PCI2_LOWER_IO;
- hose_b->io_space.end = MPC85XX_PCI2_UPPER_IO;
- hose_b->io_base_phys = MPC85XX_PCI2_IO_BASE;
- hose_b->io_base_virt = hose_a->io_base_virt + MPC85XX_PCI1_IO_SIZE;
-
- /* setup resources */
- pci_init_resource(&hose_b->mem_resources[0],
- MPC85XX_PCI2_LOWER_MEM,
- MPC85XX_PCI2_UPPER_MEM,
- IORESOURCE_MEM, "PCI2 host bridge");
-
- pci_init_resource(&hose_b->io_resource,
- MPC85XX_PCI2_LOWER_IO,
- MPC85XX_PCI2_UPPER_IO,
- IORESOURCE_IO, "PCI2 host bridge");
-
- hose_b->last_busno = pciauto_bus_scan(hose_b, hose_b->first_busno);
-
- /* let board code know what the last bus number was on PCI1 */
- mpc85xx_pci1_last_busno = hose_a->last_busno;
-#endif
- return;
-}
-#endif /* CONFIG_PCI */
-
-
diff --git a/arch/ppc/syslib/ppc85xx_setup.h b/arch/ppc/syslib/ppc85xx_setup.h
deleted file mode 100644
index 6ff7999..0000000
--- a/arch/ppc/syslib/ppc85xx_setup.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * MPC85XX common board definitions
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * Copyright 2004 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-#ifndef __PPC_SYSLIB_PPC85XX_SETUP_H
-#define __PPC_SYSLIB_PPC85XX_SETUP_H
-
-#include <linux/init.h>
-#include <asm/ppcboot.h>
-
-extern unsigned long mpc85xx_find_end_of_memory(void) __init;
-extern void mpc85xx_calibrate_decr(void) __init;
-extern void mpc85xx_early_serial_map(void) __init;
-extern void mpc85xx_restart(char *cmd);
-extern void mpc85xx_power_off(void);
-extern void mpc85xx_halt(void);
-extern void mpc85xx_setup_hose(void) __init;
-
-/* PCI config */
-#define PCI1_CFG_ADDR_OFFSET (0x8000)
-#define PCI1_CFG_DATA_OFFSET (0x8004)
-
-#define PCI2_CFG_ADDR_OFFSET (0x9000)
-#define PCI2_CFG_DATA_OFFSET (0x9004)
-
-/* Additional register for PCI-X configuration */
-#define PCIX_NEXT_CAP 0x60
-#define PCIX_CAP_ID 0x61
-#define PCIX_COMMAND 0x62
-#define PCIX_STATUS 0x64
-
-/* Serial Config */
-#ifdef CONFIG_SERIAL_MANY_PORTS
-#define RS_TABLE_SIZE 64
-#else
-#define RS_TABLE_SIZE 2
-#endif
-
-#ifndef BASE_BAUD
-#define BASE_BAUD 115200
-#endif
-
-/* Offset of CPM register space */
-#define CPM_MAP_ADDR (CCSRBAR + MPC85xx_CPM_OFFSET)
-
-#endif /* __PPC_SYSLIB_PPC85XX_SETUP_H */
OpenPOWER on IntegriCloud