x86, UML: remove x86-specific implementations of find_first_bit

x86 has been switched to the generic versions of find_first_bit
and find_first_zero_bit, but the original versions were retained.
This patch just removes the now unused x86-specific versions.

also update UML.

Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

6 files changed, 10 insertions, 112 deletions

diff --git a/arch/um/Kconfig.i386 b/arch/um/Kconfig.i386
index be75560..49990ea 100644
--- a/arch/um/Kconfig.i386
+++ b/arch/um/Kconfig.i386
@@ -39,6 +39,10 @@ config ARCH_REUSE_HOST_VSYSCALL_AREA
 	bool
 	default y
 
+config GENERIC_FIND_FIRST_BIT
+	bool
+	default y
+
 config GENERIC_FIND_NEXT_BIT
 	bool
 	default y
diff --git a/arch/um/Kconfig.x86_64 b/arch/um/Kconfig.x86_64
index 4ab5aa6..cc42e59 100644
--- a/arch/um/Kconfig.x86_64
+++ b/arch/um/Kconfig.x86_64
@@ -34,6 +34,10 @@ config SMP_BROKEN
 	bool
 	default y
 
+config GENERIC_FIND_FIRST_BIT
+	bool
+	default y
+
 config GENERIC_FIND_NEXT_BIT
 	bool
 	default y
diff --git a/arch/um/sys-i386/Makefile b/arch/um/sys-i386/Makefile
index 964dc1a0..598b5c1 100644
--- a/arch/um/sys-i386/Makefile
+++ b/arch/um/sys-i386/Makefile
@@ -6,7 +6,7 @@ obj-y = bug.o bugs.o checksum.o delay.o fault.o ksyms.o ldt.o ptrace.o \
 	ptrace_user.o setjmp.o signal.o stub.o stub_segv.o syscalls.o sysrq.o \
 	sys_call_table.o tls.o
 
-subarch-obj-y = lib/bitops_32.o lib/semaphore_32.o lib/string_32.o
+subarch-obj-y = lib/semaphore_32.o lib/string_32.o
 subarch-obj-$(CONFIG_HIGHMEM) += mm/highmem_32.o
 subarch-obj-$(CONFIG_MODULES) += kernel/module_32.o
 
diff --git a/arch/um/sys-x86_64/Makefile b/arch/um/sys-x86_64/Makefile
index 3c22de5..c8b4cce 100644
--- a/arch/um/sys-x86_64/Makefile
+++ b/arch/um/sys-x86_64/Makefile
@@ -10,7 +10,7 @@ obj-y = bug.o bugs.o delay.o fault.o ldt.o mem.o ptrace.o ptrace_user.o \
 
 obj-$(CONFIG_MODULES) += um_module.o
 
-subarch-obj-y = lib/bitops_64.o lib/csum-partial_64.o lib/memcpy_64.o lib/thunk_64.o
+subarch-obj-y = lib/csum-partial_64.o lib/memcpy_64.o lib/thunk_64.o
 subarch-obj-$(CONFIG_MODULES) += kernel/module_64.o
 
 ldt-y = ../sys-i386/ldt.o
diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
index 4360932..76f60f5 100644
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@@ -21,7 +21,6 @@ else
 
         lib-y += csum-partial_64.o csum-copy_64.o csum-wrappers_64.o
         lib-y += thunk_64.o clear_page_64.o copy_page_64.o
-        lib-y += bitops_64.o
         lib-y += memmove_64.o memset_64.o
         lib-y += copy_user_64.o rwlock_64.o copy_user_nocache_64.o
 endif
diff --git a/arch/x86/lib/bitops_64.c b/arch/x86/lib/bitops_64.c
deleted file mode 100644
index 568467d..0000000
--- a/arch/x86/lib/bitops_64.c
+++ /dev/null
@@ -1,109 +0,0 @@
-#ifndef CONFIG_GENERIC_FIND_FIRST_BIT
-#include <linux/bitops.h>
-
-#undef find_first_zero_bit
-#undef find_first_bit
-
-static inline long
-__find_first_zero_bit(const unsigned long * addr, unsigned long size)
-{
-	long d0, d1, d2;
-	long res;
-
-	/*
-	 * We must test the size in words, not in bits, because
-	 * otherwise incoming sizes in the range -63..-1 will not run
-	 * any scasq instructions, and then the flags used by the je
-	 * instruction will have whatever random value was in place
-	 * before.  Nobody should call us like that, but
-	 * find_next_zero_bit() does when offset and size are at the
-	 * same word and it fails to find a zero itself.
-	 */
-	size += 63;
-	size >>= 6;
-	if (!size)
-		return 0;
-	asm volatile(
-		"  repe; scasq\n"
-		"  je 1f\n"
-		"  xorq -8(%%rdi),%%rax\n"
-		"  subq $8,%%rdi\n"
-		"  bsfq %%rax,%%rdx\n"
-		"1:  subq %[addr],%%rdi\n"
-		"  shlq $3,%%rdi\n"
-		"  addq %%rdi,%%rdx"
-		:"=d" (res), "=&c" (d0), "=&D" (d1), "=&a" (d2)
-		:"0" (0ULL), "1" (size), "2" (addr), "3" (-1ULL),
-		 [addr] "S" (addr) : "memory");
-	/*
-	 * Any register would do for [addr] above, but GCC tends to
-	 * prefer rbx over rsi, even though rsi is readily available
-	 * and doesn't have to be saved.
-	 */
-	return res;
-}
-
-/**
- * find_first_zero_bit - find the first zero bit in a memory region
- * @addr: The address to start the search at
- * @size: The maximum size to search
- *
- * Returns the bit-number of the first zero bit, not the number of the byte
- * containing a bit.
- */
-long find_first_zero_bit(const unsigned long * addr, unsigned long size)
-{
-	return __find_first_zero_bit (addr, size);
-}
-
-static inline long
-__find_first_bit(const unsigned long * addr, unsigned long size)
-{
-	long d0, d1;
-	long res;
-
-	/*
-	 * We must test the size in words, not in bits, because
-	 * otherwise incoming sizes in the range -63..-1 will not run
-	 * any scasq instructions, and then the flags used by the jz
-	 * instruction will have whatever random value was in place
-	 * before.  Nobody should call us like that, but
-	 * find_next_bit() does when offset and size are at the same
-	 * word and it fails to find a one itself.
-	 */
-	size += 63;
-	size >>= 6;
-	if (!size)
-		return 0;
-	asm volatile(
-		"   repe; scasq\n"
-		"   jz 1f\n"
-		"   subq $8,%%rdi\n"
-		"   bsfq (%%rdi),%%rax\n"
-		"1: subq %[addr],%%rdi\n"
-		"   shlq $3,%%rdi\n"
-		"   addq %%rdi,%%rax"
-		:"=a" (res), "=&c" (d0), "=&D" (d1)
-		:"0" (0ULL), "1" (size), "2" (addr),
-		 [addr] "r" (addr) : "memory");
-	return res;
-}
-
-/**
- * find_first_bit - find the first set bit in a memory region
- * @addr: The address to start the search at
- * @size: The maximum size to search
- *
- * Returns the bit-number of the first set bit, not the number of the byte
- * containing a bit.
- */
-long find_first_bit(const unsigned long * addr, unsigned long size)
-{
-	return __find_first_bit(addr,size);
-}
-
-#include <linux/module.h>
-
-EXPORT_SYMBOL(find_first_bit);
-EXPORT_SYMBOL(find_first_zero_bit);
-#endif