diff options
author | Olof Johansson <olof@lixom.net> | 2013-05-31 22:44:13 -0700 |
---|---|---|
committer | Olof Johansson <olof@lixom.net> | 2013-05-31 22:44:13 -0700 |
commit | 75ae47f9de39cdea1efc7b5908d5a9ee580ee892 (patch) | |
tree | 2447b5475cb712b2ff0ea165c1d4c115d6d3b852 /arch | |
parent | e4aa937ec75df0eea0bee03bffa3303ad36c986b (diff) | |
parent | 391a16c7783a64309dc930c6d454372d7a8beb12 (diff) | |
download | op-kernel-dev-75ae47f9de39cdea1efc7b5908d5a9ee580ee892.zip op-kernel-dev-75ae47f9de39cdea1efc7b5908d5a9ee580ee892.tar.gz |
Merge tag 'boards-3.11-2' of git://git.infradead.org/users/jcooper/linux into next/boards
From Jason Cooper, mvebu board changes for v3.11.
Signed-off-by: Olof Johansson <olof@lixom.net>
* tag 'boards-3.11-2' of git://git.infradead.org/users/jcooper/linux:
ARM: Kirkwood: Convert LSXL to restart-poweroff driver.
ARM: Kirkwood: Make use of the QNAP Power off driver.
ARM: Kirkwood: add DT support for Sheevaplug and Sheevaplug eSATA
Diffstat (limited to 'arch')
-rw-r--r-- | arch/arm/boot/dts/kirkwood-lsxl.dtsi | 4 | ||||
-rw-r--r-- | arch/arm/boot/dts/kirkwood-ts219.dtsi | 5 | ||||
-rw-r--r-- | arch/arm/mach-kirkwood/Kconfig | 9 | ||||
-rw-r--r-- | arch/arm/mach-kirkwood/Makefile | 1 | ||||
-rw-r--r-- | arch/arm/mach-kirkwood/board-dt.c | 4 | ||||
-rw-r--r-- | arch/arm/mach-kirkwood/board-lsxl.c | 16 | ||||
-rw-r--r-- | arch/arm/mach-kirkwood/board-sheevaplug.c | 27 | ||||
-rw-r--r-- | arch/arm/mach-kirkwood/board-ts219.c | 3 | ||||
-rw-r--r-- | arch/arm/mach-kirkwood/common.h | 5 |
9 files changed, 55 insertions, 19 deletions
diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi index 37d45c4..996c7fe 100644 --- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi +++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi @@ -172,6 +172,10 @@ alarm-gpios = <&gpio1 8 0>; }; + restart_poweroff { + compatible = "restart-poweroff"; + }; + regulators { compatible = "simple-bus"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi index 64ea27c..4e29460 100644 --- a/arch/arm/boot/dts/kirkwood-ts219.dtsi +++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi @@ -31,6 +31,11 @@ clock-frequency = <200000000>; status = "okay"; }; + poweroff@12100 { + compatible = "qnap,power-off"; + reg = <0x12000 0x100>; + clocks = <&gate_clk 7>; + }; spi@10600 { status = "okay"; diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index 7509a89..1f7078e 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -227,6 +227,7 @@ config MACH_KM_KIRKWOOD_DT config MACH_LSXL_DT bool "Buffalo Linkstation LS-XHL, LS-CHLv2 (Flattened Device Tree)" select ARCH_KIRKWOOD_DT + select POWER_RESET_RESTART help Say 'Y' here if you want your kernel to support the Buffalo Linkstation LS-XHL & LS-CHLv2 devices, using @@ -296,6 +297,13 @@ config MACH_READYNAS_DT Say 'Y' here if you want your kernel to support the NETGEAR ReadyNAS Duo v2 using Fattened Device Tree. +config MACH_SHEEVAPLUG_DT + bool "Marvell (eSATA) SheevaPlug (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + Marvell (eSATA) SheevaPlug (Flattened Device Tree). + config MACH_TOPKICK_DT bool "USI Topkick (Flattened Device Tree)" select ARCH_KIRKWOOD_DT @@ -308,6 +316,7 @@ config MACH_TS219_DT select ARCH_KIRKWOOD_DT select ARM_APPENDED_DTB select ARM_ATAG_DTB_COMPAT + select POWER_RESET_QNAP help Say 'Y' here if you want your kernel to support the QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index e1f3735..8846abf 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -40,5 +40,6 @@ obj-$(CONFIG_MACH_NETSPACE_V2_DT) += board-ns2.o obj-$(CONFIG_MACH_NSA310_DT) += board-nsa310.o obj-$(CONFIG_MACH_OPENBLOCKS_A6_DT) += board-openblocks_a6.o obj-$(CONFIG_MACH_READYNAS_DT) += board-readynas.o +obj-$(CONFIG_MACH_SHEEVAPLUG_DT) += board-sheevaplug.o obj-$(CONFIG_MACH_TOPKICK_DT) += board-usi_topkick.o obj-$(CONFIG_MACH_TS219_DT) += board-ts219.o tsx1x-common.o diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index e9647b8..a09dbac 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -112,6 +112,9 @@ static void __init kirkwood_dt_init(void) if (of_machine_is_compatible("globalscale,guruplug")) guruplug_dt_init(); + if (of_machine_is_compatible("globalscale,sheevaplug")) + sheevaplug_dt_init(); + if (of_machine_is_compatible("dlink,dns-kirkwood")) dnskw_init(); @@ -165,6 +168,7 @@ static void __init kirkwood_dt_init(void) static const char * const kirkwood_dt_board_compat[] = { "globalscale,dreamplug", "globalscale,guruplug", + "globalscale,sheevaplug", "dlink,dns-320", "dlink,dns-325", "iom,iconnect", diff --git a/arch/arm/mach-kirkwood/board-lsxl.c b/arch/arm/mach-kirkwood/board-lsxl.c index 4ec8b7a..3483952 100644 --- a/arch/arm/mach-kirkwood/board-lsxl.c +++ b/arch/arm/mach-kirkwood/board-lsxl.c @@ -25,19 +25,6 @@ static struct mv643xx_eth_platform_data lsxl_ge01_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(8), }; -/* - * On the LS-XHL/LS-CHLv2, the shutdown process is following: - * - Userland monitors key events until the power switch goes to off position - * - The board reboots - * - U-boot starts and goes into an idle mode waiting for the user - * to move the switch to ON position - * - */ -static void lsxl_power_off(void) -{ - kirkwood_restart('h', NULL); -} - void __init lsxl_init(void) { /* @@ -46,7 +33,4 @@ void __init lsxl_init(void) kirkwood_ge00_init(&lsxl_ge00_data); kirkwood_ge01_init(&lsxl_ge01_data); - - /* register power-off method */ - pm_power_off = lsxl_power_off; } diff --git a/arch/arm/mach-kirkwood/board-sheevaplug.c b/arch/arm/mach-kirkwood/board-sheevaplug.c new file mode 100644 index 0000000..fa38937 --- /dev/null +++ b/arch/arm/mach-kirkwood/board-sheevaplug.c @@ -0,0 +1,27 @@ +/* + * arch/arm/mach-kirkwood/board-sheevaplug.c + * + * Marvell Sheevaplug Reference Board Init for drivers not converted to + * flattened device tree yet. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mv643xx_eth.h> +#include "common.h" + +static struct mv643xx_eth_platform_data sheevaplug_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +void __init sheevaplug_dt_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_ge00_init(&sheevaplug_ge00_data); +} diff --git a/arch/arm/mach-kirkwood/board-ts219.c b/arch/arm/mach-kirkwood/board-ts219.c index acb0187..10fb397 100644 --- a/arch/arm/mach-kirkwood/board-ts219.c +++ b/arch/arm/mach-kirkwood/board-ts219.c @@ -23,7 +23,6 @@ #include <asm/mach/arch.h> #include <mach/kirkwood.h> #include "common.h" -#include "tsx1x-common.h" static struct mv643xx_eth_platform_data qnap_ts219_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(8), @@ -38,8 +37,6 @@ void __init qnap_dt_ts219_init(void) qnap_ts219_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0); kirkwood_ge00_init(&qnap_ts219_ge00_data); - - pm_power_off = qnap_tsx1x_power_off; } /* FIXME: Will not work with DT. Maybe use MPP40_GPIO? */ diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index 21da3b1..974442e 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -65,6 +65,11 @@ void guruplug_dt_init(void); #else static inline void guruplug_dt_init(void) {}; #endif +#ifdef CONFIG_MACH_SHEEVAPLUG_DT +void sheevaplug_dt_init(void); +#else +static inline void sheevaplug_dt_init(void) {}; +#endif #ifdef CONFIG_MACH_TS219_DT void qnap_dt_ts219_init(void); #else |