[POWERPC] Support for the Ebony 440GP reference board in arch/powerpc

This adds platform support code for the Ebony (440GP) evaluation
board.  This includes both code in arch/powerpc/platforms/44x for
board initialization, and zImage wrapper code to correctly tweak the
flattened device tree based on information from the firmware.  The
zImage supports both IBM OpenBIOS (aka "treeboot") and old versions of
uboot which don't support a flattened device tree.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

15 files changed, 1418 insertions, 11 deletions

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index abb13cf..808d2ef 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -214,6 +214,7 @@ config 40x
 config 44x
 	bool "AMCC 44x"
 	select PPC_DCR_NATIVE
+	select WANT_DEVICE_TREE
 
 config E200
 	bool "Freescale e200"
@@ -278,9 +279,14 @@ config PPC_OF_PLATFORM_PCI
 	depends on PPC64 # not supported on 32 bits yet
 	default n
 
+config 4xx
+	bool
+	depends on 40x || 44x
+	default y
+
 config BOOKE
 	bool
-	depends on E200 || E500
+	depends on E200 || E500 || 44x
 	default y
 
 config FSL_BOOKE
diff --git a/arch/powerpc/boot/44x.c b/arch/powerpc/boot/44x.c
new file mode 100644
index 0000000..d51377d
--- /dev/null
+++ b/arch/powerpc/boot/44x.c
@@ -0,0 +1,40 @@
+/*
+ * Copyright 2007 David Gibson, IBM Corporation.
+ *
+ * Based on earlier code:
+ *   Matt Porter <mporter@kernel.crashing.org>
+ *   Copyright 2002-2005 MontaVista Software Inc.
+ *
+ *   Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ *   Copyright (c) 2003, 2004 Zultys Technologies
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <stddef.h>
+#include "types.h"
+#include "string.h"
+#include "stdio.h"
+#include "ops.h"
+#include "reg.h"
+#include "dcr.h"
+
+/* Read the 44x memory controller to get size of system memory. */
+void ibm44x_fixup_memsize(void)
+{
+	int i;
+	unsigned long memsize, bank_config;
+
+	memsize = 0;
+	for (i = 0; i < ARRAY_SIZE(sdram_bxcr); i++) {
+		mtdcr(DCRN_SDRAM0_CFGADDR, sdram_bxcr[i]);
+		bank_config = mfdcr(DCRN_SDRAM0_CFGDATA);
+
+		if (bank_config & SDRAM_CONFIG_BANK_ENABLE)
+			memsize += SDRAM_CONFIG_BANK_SIZE(bank_config);
+	}
+
+	dt_fixup_memory(0, memsize);
+}
diff --git a/arch/powerpc/boot/44x.h b/arch/powerpc/boot/44x.h
new file mode 100644
index 0000000..7b129ad
--- /dev/null
+++ b/arch/powerpc/boot/44x.h
@@ -0,0 +1,16 @@
+/*
+ * PowerPC 44x related functions
+ *
+ * Copyright 2007 David Gibson, IBM Corporation.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef _PPC_BOOT_44X_H_
+#define _PPC_BOOT_44X_H_
+
+void ibm44x_fixup_memsize(void);
+void ebony_init(void *mac0, void *mac1);
+
+#endif /* _PPC_BOOT_44X_H_ */
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index ccd757c..5c384aa 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -42,8 +42,10 @@ $(addprefix $(obj)/,$(zlib) gunzip_util.o main.o): \
 
 src-wlib := string.S crt0.S stdio.c main.c flatdevtree.c flatdevtree_misc.c \
 		ns16550.c serial.c simple_alloc.c div64.S util.S \
-		gunzip_util.c elf_util.c $(zlib) devtree.c
-src-plat := of.c cuboot-83xx.c cuboot-85xx.c holly.c
+		gunzip_util.c elf_util.c $(zlib) devtree.c \
+		44x.c ebony.c
+src-plat := of.c cuboot-83xx.c cuboot-85xx.c holly.c \
+		cuboot-ebony.c treeboot-ebony.c
 src-boot := $(src-wlib) $(src-plat) empty.c
 
 src-boot := $(addprefix $(obj)/, $(src-boot))
@@ -135,6 +137,7 @@ image-$(CONFIG_DEFAULT_UIMAGE)		+= uImage
 ifneq ($(CONFIG_DEVICE_TREE),"")
 image-$(CONFIG_PPC_83xx)		+= cuImage.83xx
 image-$(CONFIG_PPC_85xx)		+= cuImage.85xx
+image-$(CONFIG_EBONY)			+= treeImage.ebony cuImage.ebony
 endif
 
 # For 32-bit powermacs, build the COFF and miboot images
@@ -144,7 +147,8 @@ image-$(CONFIG_PPC_PMAC)	+= zImage.coff zImage.miboot
 endif
 
 initrd-  := $(patsubst zImage%, zImage.initrd%, $(image-n) $(image-))
-initrd-y := $(patsubst zImage%, zImage.initrd%, $(image-y))
+initrd-y := $(patsubst zImage%, zImage.initrd%, \
+		$(patsubst treeImage%, treeImage.initrd%, $(image-y)))
 initrd-y := $(filter-out $(image-y), $(initrd-y))
 targets	+= $(image-y) $(initrd-y)
 
@@ -181,6 +185,12 @@ dts = $(if $(shell echo $(CONFIG_DEVICE_TREE) | grep '^/'),\
 $(obj)/cuImage.%: vmlinux $(dts) $(wrapperbits)
 	$(call if_changed,wrap,cuboot-$*,$(dts))
 
+$(obj)/treeImage.%: vmlinux $(dts) $(wrapperbits)
+	$(call if_changed,wrap,treeboot-$*,$(dts))
+
+$(obj)/treeImage.initrd.%: vmlinux $(dts) $(wrapperbits)
+	$(call if_changed,wrap,treeboot-$*,$(dts),,$(obj)/ramdisk.image.gz)
+
 $(obj)/zImage:		$(addprefix $(obj)/, $(image-y))
 	@rm -f $@; ln $< $@
 $(obj)/zImage.initrd:	$(addprefix $(obj)/, $(initrd-y))
@@ -190,7 +200,8 @@ install: $(CONFIGURE) $(addprefix $(obj)/, $(image-y))
 	sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)" $<
 
 # anything not in $(targets)
-clean-files += $(image-) $(initrd-) zImage zImage.initrd cuImage.*
+clean-files += $(image-) $(initrd-) zImage zImage.initrd cuImage.* \
+	treeImage.*
 
 # clean up files cached by wrapper
 clean-kernel := vmlinux.strip vmlinux.bin
diff --git a/arch/powerpc/boot/cuboot-ebony.c b/arch/powerpc/boot/cuboot-ebony.c
new file mode 100644
index 0000000..4464c5f
--- /dev/null
+++ b/arch/powerpc/boot/cuboot-ebony.c
@@ -0,0 +1,42 @@
+/*
+ * Old U-boot compatibility for Ebony
+ *
+ * Author: David Gibson <david@gibson.dropbear.id.au>
+ *
+ * Copyright 2007 David Gibson, IBM Corporatio.
+ *   Based on cuboot-83xx.c, which is:
+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "stdio.h"
+#include "44x.h"
+
+#define TARGET_44x
+#include "ppcboot.h"
+
+static bd_t bd;
+extern char _end[];
+
+BSS_STACK(4096);
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+                   unsigned long r6, unsigned long r7)
+{
+	unsigned long end_of_ram = bd.bi_memstart + bd.bi_memsize;
+	unsigned long avail_ram = end_of_ram - (unsigned long)_end;
+
+	memcpy(&bd, (bd_t *)r3, sizeof(bd));
+	loader_info.initrd_addr = r4;
+	loader_info.initrd_size = r4 ? r5 : 0;
+	loader_info.cmdline = (char *)r6;
+	loader_info.cmdline_len = r7 - r6;
+
+	simple_alloc_init(_end, avail_ram, 32, 64);
+
+	ebony_init(&bd.bi_enetaddr, &bd.bi_enet1addr);
+}
diff --git a/arch/powerpc/boot/dcr.h b/arch/powerpc/boot/dcr.h
new file mode 100644
index 0000000..877bc97
--- /dev/null
+++ b/arch/powerpc/boot/dcr.h
@@ -0,0 +1,87 @@
+#ifndef _PPC_BOOT_DCR_H_
+#define _PPC_BOOT_DCR_H_
+
+#define mfdcr(rn) \
+	({	\
+		unsigned long rval; \
+		asm volatile("mfdcr %0,%1" : "=r"(rval) : "i"(rn)); \
+		rval; \
+	})
+#define mtdcr(rn, val) \
+	asm volatile("mtdcr %0,%1" : : "i"(rn), "r"(val))
+
+/* 440GP/440GX SDRAM controller DCRs */
+#define DCRN_SDRAM0_CFGADDR				0x010
+#define DCRN_SDRAM0_CFGDATA				0x011
+
+#define 	SDRAM0_B0CR				0x40
+#define 	SDRAM0_B1CR				0x44
+#define 	SDRAM0_B2CR				0x48
+#define 	SDRAM0_B3CR				0x4c
+
+static const unsigned long sdram_bxcr[] = { SDRAM0_B0CR, SDRAM0_B1CR, SDRAM0_B2CR, SDRAM0_B3CR };
+
+#define			SDRAM_CONFIG_BANK_ENABLE        0x00000001
+#define			SDRAM_CONFIG_SIZE_MASK          0x000e0000
+#define			SDRAM_CONFIG_BANK_SIZE(reg)	\
+	(0x00400000 << ((reg & SDRAM_CONFIG_SIZE_MASK) >> 17))
+
+/* 440GP Clock, PM, chip control */
+#define DCRN_CPC0_SR					0x0b0
+#define DCRN_CPC0_ER					0x0b1
+#define DCRN_CPC0_FR					0x0b2
+#define DCRN_CPC0_SYS0					0x0e0
+#define	  CPC0_SYS0_TUNE				  0xffc00000
+#define	  CPC0_SYS0_FBDV_MASK				  0x003c0000
+#define	  CPC0_SYS0_FWDVA_MASK				  0x00038000
+#define	  CPC0_SYS0_FWDVB_MASK				  0x00007000
+#define	  CPC0_SYS0_OPDV_MASK				  0x00000c00
+#define	  CPC0_SYS0_EPDV_MASK				  0x00000300
+/* Helper macros to compute the actual clock divider values from the
+ * encodings in the CPC0 register */
+#define	  CPC0_SYS0_FBDV(reg) \
+		((((((reg) & CPC0_SYS0_FBDV_MASK) >> 18) - 1) & 0xf) + 1)
+#define	  CPC0_SYS0_FWDVA(reg) \
+		(8 - (((reg) & CPC0_SYS0_FWDVA_MASK) >> 15))
+#define	  CPC0_SYS0_FWDVB(reg) \
+		(8 - (((reg) & CPC0_SYS0_FWDVB_MASK) >> 12))
+#define	  CPC0_SYS0_OPDV(reg) \
+		((((reg) & CPC0_SYS0_OPDV_MASK) >> 10) + 1)
+#define	  CPC0_SYS0_EPDV(reg) \
+		((((reg) & CPC0_SYS0_EPDV_MASK) >> 8) + 1)
+#define	  CPC0_SYS0_EXTSL				  0x00000080
+#define	  CPC0_SYS0_RW_MASK				  0x00000060
+#define	  CPC0_SYS0_RL					  0x00000010
+#define	  CPC0_SYS0_ZMIISL_MASK				  0x0000000c
+#define	  CPC0_SYS0_BYPASS				  0x00000002
+#define	  CPC0_SYS0_NTO1				  0x00000001
+#define DCRN_CPC0_SYS1					0x0e1
+#define DCRN_CPC0_CUST0					0x0e2
+#define DCRN_CPC0_CUST1					0x0e3
+#define DCRN_CPC0_STRP0					0x0e4
+#define DCRN_CPC0_STRP1					0x0e5
+#define DCRN_CPC0_STRP2					0x0e6
+#define DCRN_CPC0_STRP3					0x0e7
+#define DCRN_CPC0_GPIO					0x0e8
+#define DCRN_CPC0_PLB					0x0e9
+#define DCRN_CPC0_CR1					0x0ea
+#define DCRN_CPC0_CR0					0x0eb
+#define	  CPC0_CR0_SWE					  0x80000000
+#define	  CPC0_CR0_CETE					  0x40000000
+#define	  CPC0_CR0_U1FCS				  0x20000000
+#define	  CPC0_CR0_U0DTE				  0x10000000
+#define	  CPC0_CR0_U0DRE				  0x08000000
+#define	  CPC0_CR0_U0DC					  0x04000000
+#define	  CPC0_CR0_U1DTE				  0x02000000
+#define	  CPC0_CR0_U1DRE				  0x01000000
+#define	  CPC0_CR0_U1DC					  0x00800000
+#define	  CPC0_CR0_U0EC					  0x00400000
+#define	  CPC0_CR0_U1EC					  0x00200000
+#define	  CPC0_CR0_UDIV_MASK				  0x001f0000
+#define	  CPC0_CR0_UDIV(reg) \
+		((((reg) & CPC0_CR0_UDIV_MASK) >> 16) + 1)
+#define DCRN_CPC0_MIRQ0					0x0ec
+#define DCRN_CPC0_MIRQ1					0x0ed
+#define DCRN_CPC0_JTAGID				0x0ef
+
+#endif	/* _PPC_BOOT_DCR_H_ */
diff --git a/arch/powerpc/boot/ebony.c b/arch/powerpc/boot/ebony.c
new file mode 100644
index 0000000..b1251ee
--- /dev/null
+++ b/arch/powerpc/boot/ebony.c
@@ -0,0 +1,129 @@
+/*
+ * Copyright 2007 David Gibson, IBM Corporation.
+ *
+ * Based on earlier code:
+ *   Copyright (C) Paul Mackerras 1997.
+ *
+ *   Matt Porter <mporter@kernel.crashing.org>
+ *   Copyright 2002-2005 MontaVista Software Inc.
+ *
+ *   Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ *   Copyright (c) 2003, 2004 Zultys Technologies
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <stdarg.h>
+#include <stddef.h>
+#include "types.h"
+#include "elf.h"
+#include "string.h"
+#include "stdio.h"
+#include "page.h"
+#include "ops.h"
+#include "reg.h"
+#include "dcr.h"
+#include "44x.h"
+
+extern char _dtb_start[];
+extern char _dtb_end[];
+
+static u8 *ebony_mac0, *ebony_mac1;
+
+/* Calculate 440GP clocks */
+void ibm440gp_fixup_clocks(unsigned int sysclk, unsigned int ser_clk)
+{
+	u32 sys0 = mfdcr(DCRN_CPC0_SYS0);
+	u32 cr0 = mfdcr(DCRN_CPC0_CR0);
+	u32 cpu, plb, opb, ebc, tb, uart0, uart1, m;
+	u32 opdv = CPC0_SYS0_OPDV(sys0);
+	u32 epdv = CPC0_SYS0_EPDV(sys0);
+
+	if (sys0 & CPC0_SYS0_BYPASS) {
+		/* Bypass system PLL */
+		cpu = plb = sysclk;
+	} else {
+		if (sys0 & CPC0_SYS0_EXTSL)
+			/* PerClk */
+			m = CPC0_SYS0_FWDVB(sys0) * opdv * epdv;
+		else
+			/* CPU clock */
+			m = CPC0_SYS0_FBDV(sys0) * CPC0_SYS0_FWDVA(sys0);
+		cpu = sysclk * m / CPC0_SYS0_FWDVA(sys0);
+		plb = sysclk * m / CPC0_SYS0_FWDVB(sys0);
+	}
+
+	opb = plb / opdv;
+	ebc = opb / epdv;
+
+	/* FIXME: Check if this is for all 440GP, or just Ebony */
+	if ((mfpvr() & 0xf0000fff) == 0x40000440)
+		/* Rev. B 440GP, use external system clock */
+		tb = sysclk;
+	else
+		/* Rev. C 440GP, errata force us to use internal clock */
+		tb = cpu;
+
+	if (cr0 & CPC0_CR0_U0EC)
+		/* External UART clock */
+		uart0 = ser_clk;
+	else
+		/* Internal UART clock */
+		uart0 = plb / CPC0_CR0_UDIV(cr0);
+
+	if (cr0 & CPC0_CR0_U1EC)
+		/* External UART clock */
+		uart1 = ser_clk;
+	else
+		/* Internal UART clock */
+		uart1 = plb / CPC0_CR0_UDIV(cr0);
+
+	printf("PPC440GP: SysClk = %dMHz (%x)\n\r",
+	       (sysclk + 500000) / 1000000, sysclk);
+
+	dt_fixup_cpu_clocks(cpu, tb, 0);
+
+	dt_fixup_clock("/plb", plb);
+	dt_fixup_clock("/plb/opb", opb);
+	dt_fixup_clock("/plb/opb/ebc", ebc);
+	dt_fixup_clock("/plb/opb/serial@40000200", uart0);
+	dt_fixup_clock("/plb/opb/serial@40000300", uart1);
+}
+
+static void ebony_fixups(void)
+{
+	// FIXME: sysclk should be derived by reading the FPGA registers
+	unsigned long sysclk = 33000000;
+
+	ibm440gp_fixup_clocks(sysclk, 6 * 1843200);
+	ibm44x_fixup_memsize();
+	dt_fixup_mac_addresses(ebony_mac0, ebony_mac1);
+}
+
+#define SPRN_DBCR0		0x134
+#define   DBCR0_RST_SYSTEM	0x30000000
+
+static void ebony_exit(void)
+{
+	unsigned long tmp;
+
+	asm volatile (
+		"mfspr	%0,%1\n"
+		"oris	%0,%0,%2@h\n"
+		"mtspr	%1,%0"
+		: "=&r"(tmp) : "i"(SPRN_DBCR0), "i"(DBCR0_RST_SYSTEM)
+		);
+
+}
+
+void ebony_init(void *mac0, void *mac1)
+{
+	platform_ops.fixups = ebony_fixups;
+	platform_ops.exit = ebony_exit;
+	ebony_mac0 = mac0;
+	ebony_mac1 = mac1;
+	ft_init(_dtb_start, _dtb_end - _dtb_start, 32);
+	serial_console_init();
+}
diff --git a/arch/powerpc/boot/mktree.c b/arch/powerpc/boot/mktree.c
index 4cb8929..45d06a8 100644
--- a/arch/powerpc/boot/mktree.c
+++ b/arch/powerpc/boot/mktree.c
@@ -46,8 +46,8 @@ int main(int argc, char *argv[])
 	struct	stat	st;
 	boot_block_t	bt;
 
-	if (argc < 3) {
-		fprintf(stderr, "usage: %s <zImage-file> <boot-image> [entry-point]\n",argv[0]);
+	if (argc < 5) {
+		fprintf(stderr, "usage: %s <zImage-file> <boot-image> <load address> <entry point>\n",argv[0]);
 		exit(1);
 	}
 
@@ -61,10 +61,8 @@ int main(int argc, char *argv[])
 	bt.bb_magic = htonl(0x0052504F);
 
 	/* If we have the optional entry point parameter, use it */
-	if (argc == 4)
-		bt.bb_dest = bt.bb_entry_point = htonl(strtoul(argv[3], NULL, 0));
-	else
-		bt.bb_dest = bt.bb_entry_point = htonl(0x500000);
+	bt.bb_dest = htonl(strtoul(argv[3], NULL, 0));
+	bt.bb_entry_point = htonl(strtoul(argv[4], NULL, 0));
 
 	/* We know these from the linker command.
 	 * ...and then move it up into memory a little more so the
diff --git a/arch/powerpc/boot/treeboot-ebony.c b/arch/powerpc/boot/treeboot-ebony.c
new file mode 100644
index 0000000..8436a9c
--- /dev/null
+++ b/arch/powerpc/boot/treeboot-ebony.c
@@ -0,0 +1,34 @@
+/*
+ * Old U-boot compatibility for Ebony
+ *
+ * Author: David Gibson <david@gibson.dropbear.id.au>
+ *
+ * Copyright 2007 David Gibson, IBM Corporatio.
+ *   Based on cuboot-83xx.c, which is:
+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "stdio.h"
+#include "44x.h"
+
+extern char _end[];
+
+BSS_STACK(4096);
+
+#define OPENBIOS_MAC_BASE	0xfffffe0c
+#define OPENBIOS_MAC_OFFSET	0xc
+
+void platform_init(void)
+{
+	unsigned long end_of_ram = 0x8000000;
+	unsigned long avail_ram = end_of_ram - (unsigned long)_end;
+
+	simple_alloc_init(_end, avail_ram, 32, 64);
+	ebony_init((u8 *)OPENBIOS_MAC_BASE,
+		   (u8 *)(OPENBIOS_MAC_BASE + OPENBIOS_MAC_OFFSET));
+}
diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index 1ea2080..2ed8b8b 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -231,4 +231,12 @@ cuboot*)
     mkimage -A ppc -O linux -T kernel -C gzip -a "$base" -e "$entry" \
             $uboot_version -d "$ofile".bin.gz "$ofile"
     ;;
+treeboot*)
+    mv "$ofile" "$ofile.elf"
+    $object/mktree "$ofile.elf" "$ofile" "$base" "$entry"
+    if [ -z "$cacheit" ]; then
+	rm -f "$ofile.elf"
+    fi
+    exit 0
+    ;;
 esac
diff --git a/arch/powerpc/configs/ebony_defconfig b/arch/powerpc/configs/ebony_defconfig
new file mode 100644
index 0000000..c3b96ef
--- /dev/null
+++ b/arch/powerpc/configs/ebony_defconfig
@@ -0,0 +1,905 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.21
+# Fri May  4 13:47:08 2007
+#
+# CONFIG_PPC64 is not set
+CONFIG_PPC32=y
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+# CONFIG_PPC_UDBG_16550 is not set
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+
+#
+# Processor support
+#
+# CONFIG_CLASSIC32 is not set
+# CONFIG_PPC_82xx is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_86xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+CONFIG_44x=y
+# CONFIG_E200 is not set
+CONFIG_PPC_DCR_NATIVE=y
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_DCR=y
+CONFIG_4xx=y
+CONFIG_BOOKE=y
+CONFIG_PTE_64BIT=y
+CONFIG_PHYS_64BIT=y
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# Platform support
+#
+# CONFIG_PPC_MPC52xx is not set
+# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+CONFIG_EBONY=y
+CONFIG_440GP=y
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPM2 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_MATH_EMULATION=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_SECCOMP=y
+CONFIG_WANT_DEVICE_TREE=y
+CONFIG_DEVICE_TREE="ebony.dts"
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+# CONFIG_PPC_INDIRECT_PCI_BE is not set
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCIEPORTBUS is not set
+# CONFIG_PCI_DEBUG is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_BOOT_LOAD=0x01000000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=35000
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+
+#
+# Ethernet (10 or 100Mbit)
+#
+# CONFIG_NET_ETHERNET is not set
+CONFIG_IBM_NEW_EMAC=y
+CONFIG_IBM_NEW_EMAC_RXB=128
+CONFIG_IBM_NEW_EMAC_TXB=64
+CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
+CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
+CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
+# CONFIG_IBM_NEW_EMAC_DEBUG is not set
+CONFIG_IBM_NEW_EMAC_ZMII=y
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_FB is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+# CONFIG_UCC_SLOW is not set
+# CONFIG_UCC_FAST is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+
+#
+# Instrumentation Support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUGGER is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
+# CONFIG_SERIAL_TEXT_DEBUG is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
new file mode 100644
index 0000000..8e66949
--- /dev/null
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -0,0 +1,56 @@
+#config BAMBOO
+#	bool "Bamboo"
+#	depends on 44x
+#	default n
+#	select 440EP
+#	help
+#	  This option enables support for the IBM PPC440EP evaluation board.
+
+config EBONY
+	bool "Ebony"
+	depends on 44x
+	default y
+	select 440GP
+	help
+	  This option enables support for the IBM PPC440GP evaluation board.
+
+#config LUAN
+#	bool "Luan"
+#	depends on 44x
+#	default n
+#	select 440SP
+#	help
+#	  This option enables support for the IBM PPC440SP evaluation board.
+
+#config OCOTEA
+#	bool "Ocotea"
+#	depends on 44x
+#	default n
+#	select 440GX
+#	help
+#	  This option enables support for the IBM PPC440GX evaluation board.
+
+# 44x specific CPU modules, selected based on the board above.
+config 440EP
+	bool
+	select PPC_FPU
+	select IBM440EP_ERR42
+
+config 440GP
+	bool
+	select IBM_NEW_EMAC_ZMII
+
+config 440GX
+	bool
+
+config 440SP
+	bool
+
+config 440A
+	bool
+	depends on 440GX
+	default y
+
+# 44x errata/workaround config symbols, selected by the CPU models above
+config IBM440EP_ERR42
+	bool
diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile
index 575fdde..41d0a18 100644
--- a/arch/powerpc/platforms/44x/Makefile
+++ b/arch/powerpc/platforms/44x/Makefile
@@ -1 +1,2 @@
 obj-$(CONFIG_44x)	:= misc_44x.o
+obj-$(CONFIG_EBONY)	+= ebony.o
diff --git a/arch/powerpc/platforms/44x/ebony.c b/arch/powerpc/platforms/44x/ebony.c
new file mode 100644
index 0000000..ad526ea
--- /dev/null
+++ b/arch/powerpc/platforms/44x/ebony.c
@@ -0,0 +1,73 @@
+/*
+ * Ebony board specific routines
+ *
+ * Matt Porter <mporter@kernel.crashing.org>
+ * Copyright 2002-2005 MontaVista Software Inc.
+ *
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ * Copyright (c) 2003-2005 Zultys Technologies
+ *
+ * Rewritten and ported to the merged powerpc tree:
+ * Copyright 2007 David Gibson <dwg@au1.ibm.com>, IBM Corporation.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/time.h>
+#include <asm/uic.h>
+#include <asm/of_platform.h>
+
+#include "44x.h"
+
+static struct of_device_id ebony_of_bus[] = {
+	{ .type = "ibm,plb", },
+	{ .type = "ibm,opb", },
+	{ .type = "ibm,ebc", },
+	{},
+};
+
+static int __init ebony_device_probe(void)
+{
+	if (!machine_is(ebony))
+		return 0;
+
+	of_platform_bus_probe(NULL, ebony_of_bus, NULL);
+
+	return 0;
+}
+device_initcall(ebony_device_probe);
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init ebony_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	if (!of_flat_dt_is_compatible(root, "ibm,ebony"))
+		return 0;
+
+	return 1;
+}
+
+static void __init ebony_setup_arch(void)
+{
+}
+
+define_machine(ebony) {
+	.name			= "Ebony",
+	.probe			= ebony_probe,
+	.setup_arch		= ebony_setup_arch,
+	.progress		= udbg_progress,
+	.init_IRQ		= uic_init_tree,
+	.get_irq		= uic_get_irq,
+	.restart		= ppc44x_reset_system,
+	.calibrate_decr		= generic_calibrate_decr,
+};
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 51e3334..361acfa 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -42,6 +42,7 @@ source "arch/powerpc/platforms/83xx/Kconfig"
 source "arch/powerpc/platforms/85xx/Kconfig"
 source "arch/powerpc/platforms/86xx/Kconfig"
 source "arch/powerpc/platforms/embedded6xx/Kconfig"
+source "arch/powerpc/platforms/44x/Kconfig"
 #source "arch/powerpc/platforms/4xx/Kconfig
 
 config PPC_NATIVE