diff options
| author | Paul Gortmaker <paul.gortmaker@windriver.com> | 2009-09-21 10:30:08 -0400 |
|---|---|---|
| committer | Kumar Gala <galak@kernel.crashing.org> | 2009-11-05 07:16:54 -0600 |
| commit | cb5485a0b99b232c5c7c4c21e2346f8ab7ef555d (patch) | |
| tree | 47ee7cb385a0c52c56d64c12cb09e48e723ee0ce /arch | |
| parent | 38634e6769920929385f1ffc8820dc3e893cc630 (diff) | |
| download | op-kernel-dev-cb5485a0b99b232c5c7c4c21e2346f8ab7ef555d.zip op-kernel-dev-cb5485a0b99b232c5c7c4c21e2346f8ab7ef555d.tar.gz | |
powerpc/85xx: sbc8548 - fixup of PCI-e related DTS fields
The PCI-e addressing was originally patterned of the MPC8548CDS
which has PCI1, PCI2, and PCI-e. Since this board only has
PCI1 and PCI-e, it makes more sense to be similar to the MPC8568MDS
board. This does that by cutting the PCI/PCI-e I/O sizes from
16MB to 8MB and pulling the PCI-e I/O range back to 0xe280_0000
(the hole where PCI2 I/O would have been).
This also fixes a typo where an extra zero made an 8MB range a 128MB
range, removes the hole left by PCI2 from the aliases, and sets the
clocks to match the oscillators that are actually on the board.
With accompanying u-boot updates, PCI-e has been validated with
both a sky2 card (1148:9e00) and an e1000 card (8086:108b).
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/powerpc/boot/dts/sbc8548.dts | 17 |
1 files changed, 8 insertions, 9 deletions
diff --git a/arch/powerpc/boot/dts/sbc8548.dts b/arch/powerpc/boot/dts/sbc8548.dts index 9eefe00..94a3322 100644 --- a/arch/powerpc/boot/dts/sbc8548.dts +++ b/arch/powerpc/boot/dts/sbc8548.dts @@ -26,8 +26,7 @@ serial0 = &serial0; serial1 = &serial1; pci0 = &pci0; - /* pci1 doesn't have a corresponding physical connector */ - pci2 = &pci2; + pci1 = &pci1; }; cpus { @@ -381,7 +380,7 @@ bus-range = <0 0>; ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x10000000 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00800000>; - clock-frequency = <66666666>; + clock-frequency = <66000000>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; @@ -390,7 +389,7 @@ device_type = "pci"; }; - pci2: pcie@e000a000 { + pci1: pcie@e000a000 { interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < @@ -403,9 +402,9 @@ interrupt-parent = <&mpic>; interrupts = <0x1a 0x2>; bus-range = <0x0 0xff>; - ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 - 0x01000000 0x0 0x00000000 0xe3000000 0x0 0x08000000>; - clock-frequency = <33333333>; + ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe2800000 0x0 0x08000000>; + clock-frequency = <33000000>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; @@ -419,11 +418,11 @@ device_type = "pci"; ranges = <0x02000000 0x0 0xa0000000 0x02000000 0x0 0xa0000000 - 0x0 0x20000000 + 0x0 0x10000000 0x01000000 0x0 0x00000000 0x01000000 0x0 0x00000000 - 0x0 0x08000000>; + 0x0 0x00800000>; }; }; }; |
