summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@g5.osdl.org>2006-03-28 13:52:37 -0800
committerLinus Torvalds <torvalds@g5.osdl.org>2006-03-28 13:52:37 -0800
commitd4965b3e2ff94d0c7b7e6e7e9794b54950a2f4b9 (patch)
treee96e7a3e02acacd4ee200592ec176b94802d11e7 /arch
parent9561b03dc360068504cb296d325fb84295f91fbb (diff)
parentaee85fe8e8143d3f54d9e6d3c6cdd40ead563267 (diff)
downloadop-kernel-dev-d4965b3e2ff94d0c7b7e6e7e9794b54950a2f4b9.zip
op-kernel-dev-d4965b3e2ff94d0c7b7e6e7e9794b54950a2f4b9.tar.gz
Merge master.kernel.org:/home/rmk/linux-2.6-serial
* master.kernel.org:/home/rmk/linux-2.6-serial: [SERIAL] Provide Cirrus EP93xx AMBA PL010 serial support. [SERIAL] amba-pl010: allow platforms to specify modem control method [SERIAL] Remove obsoleted au1x00_uart driver [SERIAL] Small time UART configuration fix for AU1100 processor
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/mach-ep93xx/core.c68
-rw-r--r--arch/arm/mach-integrator/core.c46
-rw-r--r--arch/mips/au1000/common/setup.c2
3 files changed, 115 insertions, 1 deletions
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 865427b..2d892e4 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -30,7 +30,9 @@
#include <linux/time.h>
#include <linux/timex.h>
#include <linux/delay.h>
+#include <linux/termios.h>
#include <linux/amba/bus.h>
+#include <linux/amba/serial.h>
#include <asm/types.h>
#include <asm/setup.h>
@@ -360,6 +362,68 @@ void __init ep93xx_init_irq(void)
/*************************************************************************
* EP93xx peripheral handling
*************************************************************************/
+#define EP93XX_UART_MCR_OFFSET (0x0100)
+
+static void ep93xx_uart_set_mctrl(struct amba_device *dev,
+ void __iomem *base, unsigned int mctrl)
+{
+ unsigned int mcr;
+
+ mcr = 0;
+ if (!(mctrl & TIOCM_RTS))
+ mcr |= 2;
+ if (!(mctrl & TIOCM_DTR))
+ mcr |= 1;
+
+ __raw_writel(mcr, base + EP93XX_UART_MCR_OFFSET);
+}
+
+static struct amba_pl010_data ep93xx_uart_data = {
+ .set_mctrl = ep93xx_uart_set_mctrl,
+};
+
+static struct amba_device uart1_device = {
+ .dev = {
+ .bus_id = "apb:uart1",
+ .platform_data = &ep93xx_uart_data,
+ },
+ .res = {
+ .start = EP93XX_UART1_PHYS_BASE,
+ .end = EP93XX_UART1_PHYS_BASE + 0x0fff,
+ .flags = IORESOURCE_MEM,
+ },
+ .irq = { IRQ_EP93XX_UART1, NO_IRQ },
+ .periphid = 0x00041010,
+};
+
+static struct amba_device uart2_device = {
+ .dev = {
+ .bus_id = "apb:uart2",
+ .platform_data = &ep93xx_uart_data,
+ },
+ .res = {
+ .start = EP93XX_UART2_PHYS_BASE,
+ .end = EP93XX_UART2_PHYS_BASE + 0x0fff,
+ .flags = IORESOURCE_MEM,
+ },
+ .irq = { IRQ_EP93XX_UART2, NO_IRQ },
+ .periphid = 0x00041010,
+};
+
+static struct amba_device uart3_device = {
+ .dev = {
+ .bus_id = "apb:uart3",
+ .platform_data = &ep93xx_uart_data,
+ },
+ .res = {
+ .start = EP93XX_UART3_PHYS_BASE,
+ .end = EP93XX_UART3_PHYS_BASE + 0x0fff,
+ .flags = IORESOURCE_MEM,
+ },
+ .irq = { IRQ_EP93XX_UART3, NO_IRQ },
+ .periphid = 0x00041010,
+};
+
void __init ep93xx_init_devices(void)
{
unsigned int v;
@@ -371,4 +435,8 @@ void __init ep93xx_init_devices(void)
v &= ~EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE;
__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
__raw_writel(v, EP93XX_SYSCON_DEVICE_CONFIG);
+
+ amba_device_register(&uart1_device, &iomem_resource);
+ amba_device_register(&uart2_device, &iomem_resource);
+ amba_device_register(&uart3_device, &iomem_resource);
}
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index 20071a2..576a5e9 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -15,7 +15,9 @@
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/smp.h>
+#include <linux/termios.h>
#include <linux/amba/bus.h>
+#include <linux/amba/serial.h>
#include <asm/hardware.h>
#include <asm/irq.h>
@@ -28,6 +30,8 @@
#include "common.h"
+static struct amba_pl010_data integrator_uart_data;
+
static struct amba_device rtc_device = {
.dev = {
.bus_id = "mb:15",
@@ -44,6 +48,7 @@ static struct amba_device rtc_device = {
static struct amba_device uart0_device = {
.dev = {
.bus_id = "mb:16",
+ .platform_data = &integrator_uart_data,
},
.res = {
.start = INTEGRATOR_UART0_BASE,
@@ -57,6 +62,7 @@ static struct amba_device uart0_device = {
static struct amba_device uart1_device = {
.dev = {
.bus_id = "mb:17",
+ .platform_data = &integrator_uart_data,
},
.res = {
.start = INTEGRATOR_UART1_BASE,
@@ -115,6 +121,46 @@ static int __init integrator_init(void)
arch_initcall(integrator_init);
+/*
+ * On the Integrator platform, the port RTS and DTR are provided by
+ * bits in the following SC_CTRLS register bits:
+ * RTS DTR
+ * UART0 7 6
+ * UART1 5 4
+ */
+#define SC_CTRLC (IO_ADDRESS(INTEGRATOR_SC_BASE) + INTEGRATOR_SC_CTRLC_OFFSET)
+#define SC_CTRLS (IO_ADDRESS(INTEGRATOR_SC_BASE) + INTEGRATOR_SC_CTRLS_OFFSET)
+
+static void integrator_uart_set_mctrl(struct amba_device *dev, void __iomem *base, unsigned int mctrl)
+{
+ unsigned int ctrls = 0, ctrlc = 0, rts_mask, dtr_mask;
+
+ if (dev == &uart0_device) {
+ rts_mask = 1 << 4;
+ dtr_mask = 1 << 5;
+ } else {
+ rts_mask = 1 << 6;
+ dtr_mask = 1 << 7;
+ }
+
+ if (mctrl & TIOCM_RTS)
+ ctrlc |= rts_mask;
+ else
+ ctrls |= rts_mask;
+
+ if (mctrl & TIOCM_DTR)
+ ctrlc |= dtr_mask;
+ else
+ ctrls |= dtr_mask;
+
+ __raw_writel(ctrls, SC_CTRLS);
+ __raw_writel(ctrlc, SC_CTRLC);
+}
+
+static struct amba_pl010_data integrator_uart_data = {
+ .set_mctrl = integrator_uart_set_mctrl,
+};
+
#define CM_CTRL IO_ADDRESS(INTEGRATOR_HDR_BASE) + INTEGRATOR_HDR_CTRL_OFFSET
static DEFINE_SPINLOCK(cm_lock);
diff --git a/arch/mips/au1000/common/setup.c b/arch/mips/au1000/common/setup.c
index 1080558..307e98c 100644
--- a/arch/mips/au1000/common/setup.c
+++ b/arch/mips/au1000/common/setup.c
@@ -94,7 +94,7 @@ void __init plat_setup(void)
argptr = prom_getcmdline();
-#if defined(CONFIG_SERIAL_AU1X00_CONSOLE) || defined(CONFIG_SERIAL_8250_CONSOLE)
+#ifdef CONFIG_SERIAL_8250_CONSOLE
if ((argptr = strstr(argptr, "console=")) == NULL) {
argptr = prom_getcmdline();
strcat(argptr, " console=ttyS0,115200");
OpenPOWER on IntegriCloud