summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
authorPaul Gortmaker <paul.gortmaker@windriver.com>2009-09-21 10:30:08 -0400
committerKumar Gala <galak@kernel.crashing.org>2009-11-05 07:16:54 -0600
commitcb5485a0b99b232c5c7c4c21e2346f8ab7ef555d (patch)
tree47ee7cb385a0c52c56d64c12cb09e48e723ee0ce /arch
parent38634e6769920929385f1ffc8820dc3e893cc630 (diff)
downloadop-kernel-dev-cb5485a0b99b232c5c7c4c21e2346f8ab7ef555d.zip
op-kernel-dev-cb5485a0b99b232c5c7c4c21e2346f8ab7ef555d.tar.gz
powerpc/85xx: sbc8548 - fixup of PCI-e related DTS fields
The PCI-e addressing was originally patterned of the MPC8548CDS which has PCI1, PCI2, and PCI-e. Since this board only has PCI1 and PCI-e, it makes more sense to be similar to the MPC8568MDS board. This does that by cutting the PCI/PCI-e I/O sizes from 16MB to 8MB and pulling the PCI-e I/O range back to 0xe280_0000 (the hole where PCI2 I/O would have been). This also fixes a typo where an extra zero made an 8MB range a 128MB range, removes the hole left by PCI2 from the aliases, and sets the clocks to match the oscillators that are actually on the board. With accompanying u-boot updates, PCI-e has been validated with both a sky2 card (1148:9e00) and an e1000 card (8086:108b). Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Diffstat (limited to 'arch')
-rw-r--r--arch/powerpc/boot/dts/sbc8548.dts17
1 files changed, 8 insertions, 9 deletions
diff --git a/arch/powerpc/boot/dts/sbc8548.dts b/arch/powerpc/boot/dts/sbc8548.dts
index 9eefe00..94a3322 100644
--- a/arch/powerpc/boot/dts/sbc8548.dts
+++ b/arch/powerpc/boot/dts/sbc8548.dts
@@ -26,8 +26,7 @@
serial0 = &serial0;
serial1 = &serial1;
pci0 = &pci0;
- /* pci1 doesn't have a corresponding physical connector */
- pci2 = &pci2;
+ pci1 = &pci1;
};
cpus {
@@ -381,7 +380,7 @@
bus-range = <0 0>;
ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x10000000
0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00800000>;
- clock-frequency = <66666666>;
+ clock-frequency = <66000000>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
@@ -390,7 +389,7 @@
device_type = "pci";
};
- pci2: pcie@e000a000 {
+ pci1: pcie@e000a000 {
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
@@ -403,9 +402,9 @@
interrupt-parent = <&mpic>;
interrupts = <0x1a 0x2>;
bus-range = <0x0 0xff>;
- ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
- 0x01000000 0x0 0x00000000 0xe3000000 0x0 0x08000000>;
- clock-frequency = <33333333>;
+ ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
+ 0x01000000 0x0 0x00000000 0xe2800000 0x0 0x08000000>;
+ clock-frequency = <33000000>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
@@ -419,11 +418,11 @@
device_type = "pci";
ranges = <0x02000000 0x0 0xa0000000
0x02000000 0x0 0xa0000000
- 0x0 0x20000000
+ 0x0 0x10000000
0x01000000 0x0 0x00000000
0x01000000 0x0 0x00000000
- 0x0 0x08000000>;
+ 0x0 0x00800000>;
};
};
};
OpenPOWER on IntegriCloud