Merge branch 'for_2.6.33rc_c' of git://git.pwsan.com/linux-2.6 into omap-fixes-for-linus

13 files changed, 137 insertions, 91 deletions

diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index 6887bf3..65e7b5b 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -599,7 +599,7 @@ static struct clk i2c_ick = {
 static struct omap_clk omap_clks[] = {
 	/* non-ULPD clocks */
 	CLK(NULL,	"ck_ref",	&ck_ref,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
-	CLK(NULL,	"ck_dpll1",	&ck_dpll1,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"ck_dpll1",	&ck_dpll1,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
 	/* CK_GEN1 clocks */
 	CLK(NULL,	"ck_dpll1out",	&ck_dpll1out.clk, CK_16XX),
 	CLK(NULL,	"ck_sossi",	&sossi_ck,	CK_16XX),
@@ -627,7 +627,7 @@ static struct omap_clk omap_clks[] = {
 	CLK(NULL,	"tc2_ck",	&tc2_ck,	CK_16XX),
 	CLK(NULL,	"dma_ck",	&dma_ck,	CK_16XX | CK_1510 | CK_310),
 	CLK(NULL,	"dma_lcdfree_ck", &dma_lcdfree_ck, CK_16XX),
-	CLK(NULL,	"api_ck",	&api_ck.clk,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"api_ck",	&api_ck.clk,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
 	CLK(NULL,	"lb_ck",	&lb_ck.clk,	CK_1510 | CK_310),
 	CLK(NULL,	"rhea1_ck",	&rhea1_ck,	CK_16XX),
 	CLK(NULL,	"rhea2_ck",	&rhea2_ck,	CK_16XX),
@@ -678,7 +678,7 @@ static struct omap_clk omap_clks[] = {
  * init
  */
 
-static struct clk_functions omap1_clk_functions __initdata = {
+static struct clk_functions omap1_clk_functions = {
 	.clk_enable		= omap1_clk_enable,
 	.clk_disable		= omap1_clk_disable,
 	.clk_round_rate		= omap1_clk_round_rate,
diff --git a/arch/arm/mach-omap2/clock2xxx.c b/arch/arm/mach-omap2/clock2xxx.c
index d0e3fb7..5420356 100644
--- a/arch/arm/mach-omap2/clock2xxx.c
+++ b/arch/arm/mach-omap2/clock2xxx.c
@@ -449,40 +449,78 @@ int omap2_select_table_rate(struct clk *clk, unsigned long rate)
 #ifdef CONFIG_CPU_FREQ
 /*
  * Walk PRCM rate table and fillout cpufreq freq_table
+ * XXX This should be replaced by an OPP layer in the near future
  */
-static struct cpufreq_frequency_table freq_table[ARRAY_SIZE(rate_table)];
+static struct cpufreq_frequency_table *freq_table;
 
 void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
 {
-	struct prcm_config *prcm;
+	const struct prcm_config *prcm;
+	long sys_ck_rate;
 	int i = 0;
+	int tbl_sz = 0;
+
+	sys_ck_rate = clk_get_rate(sclk);
 
 	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
 		if (!(prcm->flags & cpu_mask))
 			continue;
-		if (prcm->xtal_speed != sys_ck.rate)
+		if (prcm->xtal_speed != sys_ck_rate)
 			continue;
 
 		/* don't put bypass rates in table */
 		if (prcm->dpll_speed == prcm->xtal_speed)
 			continue;
 
-		freq_table[i].index = i;
-		freq_table[i].frequency = prcm->mpu_speed / 1000;
-		i++;
+		tbl_sz++;
 	}
 
-	if (i == 0) {
-		printk(KERN_WARNING "%s: failed to initialize frequency "
-		       "table\n", __func__);
+	/*
+	 * XXX Ensure that we're doing what CPUFreq expects for this error
+	 * case and the following one
+	 */
+	if (tbl_sz == 0) {
+		pr_warning("%s: no matching entries in rate_table\n",
+			   __func__);
+		return;
+	}
+
+	/* Include the CPUFREQ_TABLE_END terminator entry */
+	tbl_sz++;
+
+	freq_table = kzalloc(sizeof(struct cpufreq_frequency_table) * tbl_sz,
+			     GFP_ATOMIC);
+	if (!freq_table) {
+		pr_err("%s: could not kzalloc frequency table\n", __func__);
 		return;
 	}
 
+	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
+		if (!(prcm->flags & cpu_mask))
+			continue;
+		if (prcm->xtal_speed != sys_ck_rate)
+			continue;
+
+		/* don't put bypass rates in table */
+		if (prcm->dpll_speed == prcm->xtal_speed)
+			continue;
+
+		freq_table[i].index = i;
+		freq_table[i].frequency = prcm->mpu_speed / 1000;
+		i++;
+	}
+
 	freq_table[i].index = i;
 	freq_table[i].frequency = CPUFREQ_TABLE_END;
 
 	*table = &freq_table[0];
 }
+
+void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table)
+{
+	kfree(freq_table);
+}
+
 #endif
 
 struct clk_functions omap2_clk_functions = {
@@ -494,6 +532,7 @@ struct clk_functions omap2_clk_functions = {
 	.clk_disable_unused	= omap2_clk_disable_unused,
 #ifdef	CONFIG_CPU_FREQ
 	.clk_init_cpufreq_table	= omap2_clk_init_cpufreq_table,
+	.clk_exit_cpufreq_table	= omap2_clk_exit_cpufreq_table,
 #endif
 };
 
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index ded3236..d4217b9 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -34,7 +34,6 @@
 #include <asm/div64.h>
 #include <asm/clkdev.h>
 
-#include <plat/sdrc.h>
 #include "clock.h"
 #include "clock34xx.h"
 #include "sdrc.h"
diff --git a/arch/arm/mach-omap2/clock34xx_data.c b/arch/arm/mach-omap2/clock34xx_data.c
index 8bdcc9cc..c6031d7 100644
--- a/arch/arm/mach-omap2/clock34xx_data.c
+++ b/arch/arm/mach-omap2/clock34xx_data.c
@@ -776,6 +776,8 @@ static struct clk dpll4_m5_ck = {
 	.clksel_mask	= OMAP3430_CLKSEL_CAM_MASK,
 	.clksel		= div16_dpll4_clksel,
 	.clkdm_name	= "dpll4_clkdm",
+	.set_rate	= &omap2_clksel_set_rate,
+	.round_rate	= &omap2_clksel_round_rate,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -1500,6 +1502,7 @@ static struct clk uart2_fck = {
 	.parent		= &core_48m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_UART2_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -1509,6 +1512,7 @@ static struct clk uart1_fck = {
 	.parent		= &core_48m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_UART1_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -2745,7 +2749,7 @@ static struct clk mcbsp4_ick = {
 };
 
 static const struct clksel mcbsp_234_clksel[] = {
-	{ .parent = &core_96m_fck, .rates = common_mcbsp_96m_rates },
+	{ .parent = &per_96m_fck,  .rates = common_mcbsp_96m_rates },
 	{ .parent = &mcbsp_clks,   .rates = common_mcbsp_mcbsp_rates },
 	{ .parent = NULL }
 };
diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index 1a45ed1..dd285f0 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -559,7 +559,7 @@ int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk)
 	 * downstream clocks for debugging purposes?
 	 */
 
-	if (!clkdm || !clk)
+	if (!clkdm || !clk || !clkdm->clktrctrl_mask)
 		return -EINVAL;
 
 	if (atomic_inc_return(&clkdm->usecount) > 1)
@@ -610,7 +610,7 @@ int omap2_clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk)
 	 * downstream clocks for debugging purposes?
 	 */
 
-	if (!clkdm || !clk)
+	if (!clkdm || !clk || !clkdm->clktrctrl_mask)
 		return -EINVAL;
 
 #ifdef DEBUG
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index a8749e8..5a79964 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -33,7 +33,6 @@
 #include <plat/sdrc.h>
 #include <plat/gpmc.h>
 #include <plat/serial.h>
-#include <plat/mux.h>
 #include <plat/vram.h>
 
 #include "clock.h"
@@ -73,21 +72,21 @@ static struct map_desc omap24xx_io_desc[] __initdata = {
 #ifdef CONFIG_ARCH_OMAP2420
 static struct map_desc omap242x_io_desc[] __initdata = {
 	{
-		.virtual	= DSP_MEM_24XX_VIRT,
-		.pfn		= __phys_to_pfn(DSP_MEM_24XX_PHYS),
-		.length		= DSP_MEM_24XX_SIZE,
+		.virtual	= DSP_MEM_2420_VIRT,
+		.pfn		= __phys_to_pfn(DSP_MEM_2420_PHYS),
+		.length		= DSP_MEM_2420_SIZE,
 		.type		= MT_DEVICE
 	},
 	{
-		.virtual	= DSP_IPI_24XX_VIRT,
-		.pfn		= __phys_to_pfn(DSP_IPI_24XX_PHYS),
-		.length		= DSP_IPI_24XX_SIZE,
+		.virtual	= DSP_IPI_2420_VIRT,
+		.pfn		= __phys_to_pfn(DSP_IPI_2420_PHYS),
+		.length		= DSP_IPI_2420_SIZE,
 		.type		= MT_DEVICE
 	},
 	{
-		.virtual	= DSP_MMU_24XX_VIRT,
-		.pfn		= __phys_to_pfn(DSP_MMU_24XX_PHYS),
-		.length		= DSP_MMU_24XX_SIZE,
+		.virtual	= DSP_MMU_2420_VIRT,
+		.pfn		= __phys_to_pfn(DSP_MMU_2420_PHYS),
+		.length		= DSP_MMU_2420_SIZE,
 		.type		= MT_DEVICE
 	},
 };
diff --git a/arch/arm/mach-omap2/opp2420_data.c b/arch/arm/mach-omap2/opp2420_data.c
index 126a9396..e6dda69 100644
--- a/arch/arm/mach-omap2/opp2420_data.c
+++ b/arch/arm/mach-omap2/opp2420_data.c
@@ -9,45 +9,47 @@
  * The OMAP2 processor can be run at several discrete 'PRCM configurations'.
  * These configurations are characterized by voltage and speed for clocks.
  * The device is only validated for certain combinations. One way to express
- * these combinations is via the 'ratio's' which the clocks operate with
+ * these combinations is via the 'ratios' which the clocks operate with
  * respect to each other. These ratio sets are for a given voltage/DPLL
- * setting. All configurations can be described by a DPLL setting and a ratio
- * There are 3 ratio sets for the 2430 and X ratio sets for 2420.
- *
- * 2430 differs from 2420 in that there are no more phase synchronizers used.
- * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs
- * 2430 (iva2.1, NOdsp, mdm)
+ * setting. All configurations can be described by a DPLL setting and a ratio.
  *
  * XXX Missing voltage data.
+ * XXX Missing 19.2MHz sys_clk rate sets (needed for N800/N810)
  *
  * THe format described in this file is deprecated.  Once a reasonable
  * OPP API exists, the data in this file should be converted to use it.
  *
  * This is technically part of the OMAP2xxx clock code.
+ *
+ * Considerable work is still needed to fully support dynamic frequency
+ * changes on OMAP2xxx-series chips.  Readers interested in such a
+ * project are encouraged to review the Maemo Diablo RX-34 and RX-44
+ * kernel source at:
+ *     http://repository.maemo.org/pool/diablo/free/k/kernel-source-diablo/
  */
 
 #include "opp2xxx.h"
 #include "sdrc.h"
 #include "clock.h"
 
-/*-------------------------------------------------------------------------
- * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
+/*
+ * Key dividers which make up a PRCM set. Ratios for a PRCM are mandated.
  * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,
  * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL,
  * CM_CLKSEL2_PLL, CM_CLKSEL_MDM
  *
- * Filling in table based on H4 boards and 2430-SDPs variants available.
- * There are quite a few more rates combinations which could be defined.
+ * Filling in table based on H4 boards available.  There are quite a
+ * few more rate combinations which could be defined.
  *
- * When multiple values are defined the start up will try and choose the
- * fastest one. If a 'fast' value is defined, then automatically, the /2
- * one should be included as it can be used.	Generally having more that
- * one fast set does not make sense, as static timings need to be changed
- * to change the set.	 The exception is the bypass setting which is
- * availble for low power bypass.
+ * When multiple values are defined the start up will try and choose
+ * the fastest one. If a 'fast' value is defined, then automatically,
+ * the /2 one should be included as it can be used.  Generally having
+ * more than one fast set does not make sense, as static timings need
+ * to be changed to change the set.  The exception is the bypass
+ * setting which is available for low power bypass.
  *
  * Note: This table needs to be sorted, fastest to slowest.
- *-------------------------------------------------------------------------*/
+ **/
 const struct prcm_config omap2420_rate_table[] = {
 	/* PRCM I - FAST */
 	{S12M, S660M, S330M, RI_CM_CLKSEL_MPU_VAL,		/* 330MHz ARM */
diff --git a/arch/arm/mach-omap2/opp2430_data.c b/arch/arm/mach-omap2/opp2430_data.c
index edb8167..1b9596a 100644
--- a/arch/arm/mach-omap2/opp2430_data.c
+++ b/arch/arm/mach-omap2/opp2430_data.c
@@ -1,5 +1,5 @@
 /*
- * opp2420_data.c - old-style "OPP" table for OMAP2420
+ * opp2430_data.c - old-style "OPP" table for OMAP2430
  *
  * Copyright (C) 2005-2009 Texas Instruments, Inc.
  * Copyright (C) 2004-2009 Nokia Corporation
@@ -9,16 +9,16 @@
  * The OMAP2 processor can be run at several discrete 'PRCM configurations'.
  * These configurations are characterized by voltage and speed for clocks.
  * The device is only validated for certain combinations. One way to express
- * these combinations is via the 'ratio's' which the clocks operate with
+ * these combinations is via the 'ratios' which the clocks operate with
  * respect to each other. These ratio sets are for a given voltage/DPLL
- * setting. All configurations can be described by a DPLL setting and a ratio
- * There are 3 ratio sets for the 2430 and X ratio sets for 2420.
+ * setting. All configurations can be described by a DPLL setting and a ratio.
  *
  * 2430 differs from 2420 in that there are no more phase synchronizers used.
  * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs
  * 2430 (iva2.1, NOdsp, mdm)
  *
  * XXX Missing voltage data.
+ * XXX Missing 19.2MHz sys_clk rate sets.
  *
  * THe format described in this file is deprecated.  Once a reasonable
  * OPP API exists, the data in this file should be converted to use it.
@@ -30,24 +30,24 @@
 #include "sdrc.h"
 #include "clock.h"
 
-/*-------------------------------------------------------------------------
- * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
+/*
+ * Key dividers which make up a PRCM set. Ratios for a PRCM are mandated.
  * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,
  * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL,
  * CM_CLKSEL2_PLL, CM_CLKSEL_MDM
  *
- * Filling in table based on H4 boards and 2430-SDPs variants available.
- * There are quite a few more rates combinations which could be defined.
+ * Filling in table based on 2430-SDPs variants available.  There are
+ * quite a few more rate combinations which could be defined.
  *
- * When multiple values are defined the start up will try and choose the
- * fastest one. If a 'fast' value is defined, then automatically, the /2
- * one should be included as it can be used.	Generally having more that
- * one fast set does not make sense, as static timings need to be changed
- * to change the set.	 The exception is the bypass setting which is
- * availble for low power bypass.
+ * When multiple values are defined the start up will try and choose
+ * the fastest one. If a 'fast' value is defined, then automatically,
+ * the /2 one should be included as it can be used.  Generally having
+ * more than one fast set does not make sense, as static timings need
+ * to be changed to change the set.  The exception is the bypass
+ * setting which is available for low power bypass.
  *
  * Note: This table needs to be sorted, fastest to slowest.
- *-------------------------------------------------------------------------*/
+ */
 const struct prcm_config omap2430_rate_table[] = {
 	/* PRCM #4 - ratio2 (ES2.1) - FAST */
 	{S13M, S798M, S399M, R2_CM_CLKSEL_MPU_VAL,		/* 399MHz ARM */
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 89cafc9..d9f8c84 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -36,10 +36,6 @@ static struct clk_functions *arch_clock;
  * Standard clock functions defined in include/linux/clk.h
  *-------------------------------------------------------------------------*/
 
-/* This functions is moved to arch/arm/common/clkdev.c. For OMAP4 since
- * clock framework is not up , it is defined here to avoid rework in
- * every driver. Also dummy prcm reset function is added */
-
 int clk_enable(struct clk *clk)
 {
 	unsigned long flags;
@@ -305,7 +301,6 @@ void clk_enable_init_clocks(void)
 			clk_enable(clkp);
 	}
 }
-EXPORT_SYMBOL(clk_enable_init_clocks);
 
 /*
  * Low level helpers
@@ -334,7 +329,16 @@ void clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
 		arch_clock->clk_init_cpufreq_table(table);
 	spin_unlock_irqrestore(&clockfw_lock, flags);
 }
-EXPORT_SYMBOL(clk_init_cpufreq_table);
+
+void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&clockfw_lock, flags);
+	if (arch_clock->clk_exit_cpufreq_table)
+		arch_clock->clk_exit_cpufreq_table(table);
+	spin_unlock_irqrestore(&clockfw_lock, flags);
+}
 #endif
 
 /*-------------------------------------------------------------------------*/
diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c
index f8ddbdd..6d3d333 100644
--- a/arch/arm/plat-omap/cpu-omap.c
+++ b/arch/arm/plat-omap/cpu-omap.c
@@ -134,6 +134,7 @@ static int __init omap_cpu_init(struct cpufreq_policy *policy)
 
 static int omap_cpu_exit(struct cpufreq_policy *policy)
 {
+	clk_exit_cpufreq_table(&freq_table);
 	clk_put(mpu_clk);
 	return 0;
 }
diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h
index 309b6d1..94fe2a0 100644
--- a/arch/arm/plat-omap/include/plat/clock.h
+++ b/arch/arm/plat-omap/include/plat/clock.h
@@ -119,6 +119,7 @@ struct clk_functions {
 	void		(*clk_disable_unused)(struct clk *clk);
 #ifdef CONFIG_CPU_FREQ
 	void		(*clk_init_cpufreq_table)(struct cpufreq_frequency_table **);
+	void		(*clk_exit_cpufreq_table)(struct cpufreq_frequency_table **);
 #endif
 };
 
@@ -135,6 +136,7 @@ extern unsigned long followparent_recalc(struct clk *clk);
 extern void clk_enable_init_clocks(void);
 #ifdef CONFIG_CPU_FREQ
 extern void clk_init_cpufreq_table(struct cpufreq_frequency_table **table);
+extern void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table);
 #endif
 
 extern const struct clkops clkops_null;
diff --git a/arch/arm/plat-omap/include/plat/io.h b/arch/arm/plat-omap/include/plat/io.h
index 7e5319f..a3e7b47 100644
--- a/arch/arm/plat-omap/include/plat/io.h
+++ b/arch/arm/plat-omap/include/plat/io.h
@@ -122,16 +122,21 @@
 #define OMAP243X_SMS_VIRT	(OMAP243X_SMS_PHYS + OMAP2_L3_IO_OFFSET)
 #define OMAP243X_SMS_SIZE	SZ_1M
 
-/* DSP */
-#define DSP_MEM_24XX_PHYS	OMAP2420_DSP_MEM_BASE	/* 0x58000000 */
-#define DSP_MEM_24XX_VIRT	0xe0000000
-#define DSP_MEM_24XX_SIZE	0x28000
-#define DSP_IPI_24XX_PHYS	OMAP2420_DSP_IPI_BASE	/* 0x59000000 */
-#define DSP_IPI_24XX_VIRT	0xe1000000
-#define DSP_IPI_24XX_SIZE	SZ_4K
-#define DSP_MMU_24XX_PHYS	OMAP2420_DSP_MMU_BASE	/* 0x5a000000 */
-#define DSP_MMU_24XX_VIRT	0xe2000000
-#define DSP_MMU_24XX_SIZE	SZ_4K
+/* 2420 IVA */
+#define DSP_MEM_2420_PHYS	OMAP2420_DSP_MEM_BASE
+						/* 0x58000000 --> 0xfc100000 */
+#define DSP_MEM_2420_VIRT	0xfc100000
+#define DSP_MEM_2420_SIZE	0x28000
+#define DSP_IPI_2420_PHYS	OMAP2420_DSP_IPI_BASE
+						/* 0x59000000 --> 0xfc128000 */
+#define DSP_IPI_2420_VIRT	0xfc128000
+#define DSP_IPI_2420_SIZE	SZ_4K
+#define DSP_MMU_2420_PHYS	OMAP2420_DSP_MMU_BASE
+						/* 0x5a000000 --> 0xfc129000 */
+#define DSP_MMU_2420_VIRT	0xfc129000
+#define DSP_MMU_2420_SIZE	SZ_4K
+
+/* 2430 IVA2.1 - currently unmapped */
 
 /*
  * ----------------------------------------------------------------------------
@@ -182,16 +187,7 @@
 #define OMAP343X_SDRC_VIRT	(OMAP343X_SDRC_PHYS + OMAP2_L3_IO_OFFSET)
 #define OMAP343X_SDRC_SIZE	SZ_1M
 
-/* DSP */
-#define DSP_MEM_34XX_PHYS	OMAP34XX_DSP_MEM_BASE	/* 0x58000000 */
-#define DSP_MEM_34XX_VIRT	0xe0000000
-#define DSP_MEM_34XX_SIZE	0x28000
-#define DSP_IPI_34XX_PHYS	OMAP34XX_DSP_IPI_BASE	/* 0x59000000 */
-#define DSP_IPI_34XX_VIRT	0xe1000000
-#define DSP_IPI_34XX_SIZE	SZ_4K
-#define DSP_MMU_34XX_PHYS	OMAP34XX_DSP_MMU_BASE	/* 0x5a000000 */
-#define DSP_MMU_34XX_VIRT	0xe2000000
-#define DSP_MMU_34XX_SIZE	SZ_4K
+/* 3430 IVA - currently unmapped */
 
 /*
  * ----------------------------------------------------------------------------
diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c
index 11f5d79..0cfd54f 100644
--- a/arch/arm/plat-omap/io.c
+++ b/arch/arm/plat-omap/io.c
@@ -66,12 +66,12 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type)
 			return XLATE(p, L4_24XX_PHYS, L4_24XX_VIRT);
 	}
 	if (cpu_is_omap2420()) {
-		if (BETWEEN(p, DSP_MEM_24XX_PHYS, DSP_MEM_24XX_SIZE))
-			return XLATE(p, DSP_MEM_24XX_PHYS, DSP_MEM_24XX_VIRT);
-		if (BETWEEN(p, DSP_IPI_24XX_PHYS, DSP_IPI_24XX_SIZE))
-			return XLATE(p, DSP_IPI_24XX_PHYS, DSP_IPI_24XX_SIZE);
-		if (BETWEEN(p, DSP_MMU_24XX_PHYS, DSP_MMU_24XX_SIZE))
-			return XLATE(p, DSP_MMU_24XX_PHYS, DSP_MMU_24XX_VIRT);
+		if (BETWEEN(p, DSP_MEM_2420_PHYS, DSP_MEM_2420_SIZE))
+			return XLATE(p, DSP_MEM_2420_PHYS, DSP_MEM_2420_VIRT);
+		if (BETWEEN(p, DSP_IPI_2420_PHYS, DSP_IPI_2420_SIZE))
+			return XLATE(p, DSP_IPI_2420_PHYS, DSP_IPI_2420_SIZE);
+		if (BETWEEN(p, DSP_MMU_2420_PHYS, DSP_MMU_2420_SIZE))
+			return XLATE(p, DSP_MMU_2420_PHYS, DSP_MMU_2420_VIRT);
 	}
 	if (cpu_is_omap2430()) {
 		if (BETWEEN(p, L4_WK_243X_PHYS, L4_WK_243X_SIZE))