diff options
| author | Linus Torvalds <torvalds@woody.linux-foundation.org> | 2007-07-24 20:26:25 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@woody.linux-foundation.org> | 2007-07-24 20:26:25 -0700 |
| commit | 0de085bb474f64e4fdb2f1ff3268590792648c7b (patch) | |
| tree | 67c88c8215b85e01430531dba7d7c8ad73173b67 /arch | |
| parent | 3836df6b520a2f93033bf53200b12a2cb5137395 (diff) | |
| parent | e58712111fe6eb7573fd6dd12d80de3bec13f277 (diff) | |
| download | op-kernel-dev-0de085bb474f64e4fdb2f1ff3268590792648c7b.zip op-kernel-dev-0de085bb474f64e4fdb2f1ff3268590792648c7b.tar.gz | |
Merge branch 'for_paulus' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc
* 'for_paulus' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc: (25 commits)
[POWERPC] 85xx: Added needed MPC85xx PCI device IDs
[POWERPC] Add Freescale PCI VENDOR ID and 8641 device IDs
[POWERPC] 85xxCDS: MPC8548 DTS cleanup.
[POWERPC] 85xxCDS: Misc 8548 PCI Corrections.
[POWERPC] 85xxCDS: Delay 8259 cascade hookup.
[POWERPC] 85xxCDS: Make sure restart resets the PCI bus.
[POWERPC] 85xxCDS: Allow 8259 cascade to share an MPIC interrupt line.
[POWERPC] FSL: Add support for PCI-X controllers
[POWERPC] Make sure virtual P2P bridge registers are setup on PCIe PHB
[POWERPC] Provide ability to setup P2P bridge registers from struct resource
[POWERPC] Add basic PCI/PCI Express support for 8544DS board
[POWERPC] Make endianess of cfg_addr for indirect pci ops runtime
[POWERPC] Removed setup_indirect_pci_nomap
[POWERPC] 85xx: Add quirk to ignore bogus FPGA on CDS
[POWERPC] 85xx: Added 8568 PCIe support
[POWERPC] Fixup resources on pci_bus for PCIe PHB when no device is connected
[POWERPC] Add basic PCI node for mpc8568mds board
[POWERPC] Use Freescale pci/pcie common code for 85xx boards
[POWERPC] Update PCI nodes in the 83xx/85xx boards device tree
[POWERPC] Add 8548 CDS PCI express controller node and PCI-X device node
...
Diffstat (limited to 'arch')
43 files changed, 1630 insertions, 837 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 853c282..00099ef 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -411,11 +411,6 @@ config PPC_INDIRECT_PCI default y if 40x || 44x default n -config PPC_INDIRECT_PCI_BE - bool - depends PPC_INDIRECT_PCI - default n - config EISA bool @@ -425,6 +420,10 @@ config SBUS config FSL_SOC bool +config FSL_PCI + bool + select PPC_INDIRECT_PCI + # Yes MCA RS/6000s exist but Linux-PPC does not currently support any config MCA bool diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts index a1533cc..c5adbe4 100644 --- a/arch/powerpc/boot/dts/mpc8313erdb.dts +++ b/arch/powerpc/boot/dts/mpc8313erdb.dts @@ -178,7 +178,7 @@ #size-cells = <2>; #address-cells = <3>; reg = <8500 100>; - compatible = "83xx"; + compatible = "fsl,mpc8349-pci"; device_type = "pci"; }; diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts index 4fc0c4d..f158ed7 100644 --- a/arch/powerpc/boot/dts/mpc832x_mds.dts +++ b/arch/powerpc/boot/dts/mpc832x_mds.dts @@ -154,7 +154,7 @@ #size-cells = <2>; #address-cells = <3>; reg = <8500 100>; - compatible = "83xx"; + compatible = "fsl,mpc8349-pci"; device_type = "pci"; }; diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts index 447c03f..7c4beff 100644 --- a/arch/powerpc/boot/dts/mpc832x_rdb.dts +++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts @@ -123,7 +123,7 @@ #size-cells = <2>; #address-cells = <3>; reg = <8500 100>; - compatible = "83xx"; + compatible = "fsl,mpc8349-pci"; device_type = "pci"; }; diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts index ae9bca5..502f47c 100644 --- a/arch/powerpc/boot/dts/mpc8349emitx.dts +++ b/arch/powerpc/boot/dts/mpc8349emitx.dts @@ -197,7 +197,7 @@ #size-cells = <2>; #address-cells = <3>; reg = <8500 100>; - compatible = "83xx"; + compatible = "fsl,mpc8349-pci"; device_type = "pci"; }; @@ -222,7 +222,7 @@ #size-cells = <2>; #address-cells = <3>; reg = <8600 100>; - compatible = "83xx"; + compatible = "fsl,mpc8349-pci"; device_type = "pci"; }; diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts index f636528..0b83871 100644 --- a/arch/powerpc/boot/dts/mpc8349emitxgp.dts +++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts @@ -154,7 +154,7 @@ #size-cells = <2>; #address-cells = <3>; reg = <8600 100>; - compatible = "83xx"; + compatible = "fsl,mpc8349-pci"; device_type = "pci"; }; diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts index 310e877..4810997 100644 --- a/arch/powerpc/boot/dts/mpc834x_mds.dts +++ b/arch/powerpc/boot/dts/mpc834x_mds.dts @@ -241,7 +241,7 @@ #size-cells = <2>; #address-cells = <3>; reg = <8500 100>; - compatible = "83xx"; + compatible = "fsl,mpc8349-pci"; device_type = "pci"; }; @@ -301,7 +301,7 @@ #size-cells = <2>; #address-cells = <3>; reg = <8600 100>; - compatible = "83xx"; + compatible = "fsl,mpc8349-pci"; device_type = "pci"; }; diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts index 1e914f31..e3f7c12 100644 --- a/arch/powerpc/boot/dts/mpc836x_mds.dts +++ b/arch/powerpc/boot/dts/mpc836x_mds.dts @@ -169,7 +169,7 @@ #size-cells = <2>; #address-cells = <3>; reg = <8500 100>; - compatible = "83xx"; + compatible = "fsl,mpc8349-pci"; device_type = "pci"; }; diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts index 364a969..fc8dff9 100644 --- a/arch/powerpc/boot/dts/mpc8540ads.dts +++ b/arch/powerpc/boot/dts/mpc8540ads.dts @@ -258,7 +258,7 @@ #size-cells = <2>; #address-cells = <3>; reg = <8000 1000>; - compatible = "85xx"; + compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; device_type = "pci"; }; diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts index 070206f..fb0b647 100644 --- a/arch/powerpc/boot/dts/mpc8541cds.dts +++ b/arch/powerpc/boot/dts/mpc8541cds.dts @@ -193,7 +193,7 @@ #size-cells = <2>; #address-cells = <3>; reg = <8000 1000>; - compatible = "85xx"; + compatible = "fsl,mpc8540-pci"; device_type = "pci"; i8259@19000 { @@ -230,7 +230,7 @@ #size-cells = <2>; #address-cells = <3>; reg = <9000 1000>; - compatible = "85xx"; + compatible = "fsl,mpc8540-pci"; device_type = "pci"; }; diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts index 8285925..4a900c6 100644 --- a/arch/powerpc/boot/dts/mpc8544ds.dts +++ b/arch/powerpc/boot/dts/mpc8544ds.dts @@ -137,6 +137,217 @@ interrupt-parent = <&mpic>; }; + pci@8000 { + compatible = "fsl,mpc8540-pci"; + device_type = "pci"; + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x11 J17 Slot 1 */ + 8800 0 0 1 &mpic 2 1 + 8800 0 0 2 &mpic 3 1 + 8800 0 0 3 &mpic 4 1 + 8800 0 0 4 &mpic 1 1 + + /* IDSEL 0x12 J16 Slot 2 */ + + 9000 0 0 1 &mpic 3 1 + 9000 0 0 2 &mpic 4 1 + 9000 0 0 3 &mpic 2 1 + 9000 0 0 4 &mpic 1 1>; + + interrupt-parent = <&mpic>; + interrupts = <18 2>; + bus-range = <0 ff>; + ranges = <02000000 0 80000000 80000000 0 10000000 + 01000000 0 00000000 e2000000 0 00800000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <8000 1000>; + }; + + pcie@9000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <9000 1000>; + bus-range = <0 ff>; + ranges = <02000000 0 90000000 90000000 0 10000000 + 01000000 0 00000000 e3000000 0 00800000>; + clock-frequency = <1fca055>; + interrupt-parent = <&mpic>; + interrupts = <1a 2>; + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 4 1 + 0000 0 0 2 &mpic 5 1 + 0000 0 0 3 &mpic 6 1 + 0000 0 0 4 &mpic 7 1 + >; + }; + + pcie@a000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <a000 1000>; + bus-range = <0 ff>; + ranges = <02000000 0 a0000000 a0000000 0 10000000 + 01000000 0 00000000 e2800000 0 00800000>; + clock-frequency = <1fca055>; + interrupt-parent = <&mpic>; + interrupts = <19 2>; + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 0 1 + 0000 0 0 2 &mpic 1 1 + 0000 0 0 3 &mpic 2 1 + 0000 0 0 4 &mpic 3 1 + >; + }; + + pcie@b000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <b000 1000>; + bus-range = <0 ff>; + ranges = <02000000 0 b0000000 b0000000 0 10000000 + 01000000 0 00000000 e3800000 0 00800000>; + clock-frequency = <1fca055>; + interrupt-parent = <&mpic>; + interrupts = <1b 2>; + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + + // IDSEL 0x1a + d000 0 0 1 &i8259 6 2 + d000 0 0 2 &i8259 3 2 + d000 0 0 3 &i8259 4 2 + d000 0 0 4 &i8259 5 2 + + // IDSEL 0x1b + d800 0 0 1 &i8259 5 2 + d800 0 0 2 &i8259 0 0 + d800 0 0 3 &i8259 0 0 + d800 0 0 4 &i8259 0 0 + + // IDSEL 0x1c USB + e000 0 0 1 &i8259 9 2 + e000 0 0 2 &i8259 a 2 + e000 0 0 3 &i8259 c 2 + e000 0 0 4 &i8259 7 2 + + // IDSEL 0x1d Audio + e800 0 0 1 &i8259 9 2 + e800 0 0 2 &i8259 a 2 + e800 0 0 3 &i8259 b 2 + e800 0 0 4 &i8259 0 0 + + // IDSEL 0x1e Legacy + f000 0 0 1 &i8259 c 2 + f000 0 0 2 &i8259 0 0 + f000 0 0 3 &i8259 0 0 + f000 0 0 4 &i8259 0 0 + + // IDSEL 0x1f IDE/SATA + f800 0 0 1 &i8259 6 2 + f800 0 0 2 &i8259 0 0 + f800 0 0 3 &i8259 0 0 + f800 0 0 4 &i8259 0 0 + >; + uli1575@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + ranges = <02000000 0 b0000000 + 02000000 0 b0000000 + 0 10000000 + 01000000 0 00000000 + 01000000 0 00000000 + 0 00080000>; + + pci_bridge@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + ranges = <02000000 0 b0000000 + 02000000 0 b0000000 + 0 20000000 + 01000000 0 00000000 + 01000000 0 00000000 + 0 00100000>; + + isa@1e { + device_type = "isa"; + #interrupt-cells = <2>; + #size-cells = <1>; + #address-cells = <2>; + reg = <f000 0 0 0 0>; + ranges = <1 0 01000000 0 0 + 00001000>; + interrupt-parent = <&i8259>; + + i8259: interrupt-controller@20 { + reg = <1 20 2 + 1 a0 2 + 1 4d0 2>; + clock-frequency = <0>; + interrupt-controller; + device_type = "interrupt-controller"; + #address-cells = <0>; + #interrupt-cells = <2>; + built-in; + compatible = "chrp,iic"; + interrupts = <9 2>; + interrupt-parent = + <&mpic>; + }; + + i8042@60 { + #size-cells = <0>; + #address-cells = <1>; + reg = <1 60 1 1 64 1>; + interrupts = <1 3 c 3>; + interrupt-parent = + <&i8259>; + + keyboard@0 { + reg = <0>; + compatible = "pnpPNP,303"; + }; + + mouse@1 { + reg = <1>; + compatible = "pnpPNP,f03"; + }; + }; + + rtc@70 { + compatible = + "pnpPNP,b00"; + reg = <1 70 2>; + }; + + gpio@400 { + reg = <1 400 80>; + }; + }; + }; + }; + + }; + mpic: pic@40000 { clock-frequency = <0>; interrupt-controller; diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts index 9d0b84b..d215d21 100644 --- a/arch/powerpc/boot/dts/mpc8548cds.dts +++ b/arch/powerpc/boot/dts/mpc8548cds.dts @@ -1,5 +1,5 @@ /* - * MPC8555 CDS Device Tree Source + * MPC8548 CDS Device Tree Source * * Copyright 2006 Freescale Semiconductor Inc. * @@ -44,8 +44,14 @@ #size-cells = <1>; #interrupt-cells = <2>; device_type = "soc"; - ranges = <0 e0000000 00100000>; - reg = <e0000000 00100000>; // CCSRBAR 1M + ranges = <00001000 e0001000 000ff000 + 80000000 80000000 10000000 + e2000000 e2000000 00800000 + 90000000 90000000 10000000 + e2800000 e2800000 00800000 + a0000000 a0000000 20000000 + e3000000 e3000000 01000000>; + reg = <e0000000 00001000>; // CCSRBAR bus-frequency = <0>; memory-controller@2000 { @@ -162,8 +168,8 @@ serial@4500 { device_type = "serial"; compatible = "ns16550"; - reg = <4500 100>; // reg base, size - clock-frequency = <0>; // should we fill in in uboot? + reg = <4500 100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? interrupts = <2a 2>; interrupt-parent = <&mpic>; }; @@ -172,7 +178,7 @@ device_type = "serial"; compatible = "ns16550"; reg = <4600 100>; // reg base, size - clock-frequency = <0>; // should we fill in in uboot? + clock-frequency = <0>; // should we fill in in uboot? interrupts = <2a 2>; interrupt-parent = <&mpic>; }; @@ -183,77 +189,154 @@ fsl,has-rstcr; }; - pci1: pci@8000 { - interrupt-map-mask = <1f800 0 0 7>; + pci@8000 { + interrupt-map-mask = <f800 0 0 7>; interrupt-map = < + /* IDSEL 0x4 (PCIX Slot 2) */ + 02000 0 0 1 &mpic 0 1 + 02000 0 0 2 &mpic 1 1 + 02000 0 0 3 &mpic 2 1 + 02000 0 0 4 &mpic 3 1 + + /* IDSEL 0x5 (PCIX Slot 3) */ + 02800 0 0 1 &mpic 1 1 + 02800 0 0 2 &mpic 2 1 + 02800 0 0 3 &mpic 3 1 + 02800 0 0 4 &mpic 0 1 + + /* IDSEL 0x6 (PCIX Slot 4) */ + 03000 0 0 1 &mpic 2 1 + 03000 0 0 2 &mpic 3 1 + 03000 0 0 3 &mpic 0 1 + 03000 0 0 4 &mpic 1 1 + + /* IDSEL 0x8 (PCIX Slot 5) */ + 04000 0 0 1 &mpic 0 1 + 04000 0 0 2 &mpic 1 1 + 04000 0 0 3 &mpic 2 1 + 04000 0 0 4 &mpic 3 1 + + /* IDSEL 0xC (Tsi310 bridge) */ + 06000 0 0 1 &mpic 0 1 + 06000 0 0 2 &mpic 1 1 + 06000 0 0 3 &mpic 2 1 + 06000 0 0 4 &mpic 3 1 + + /* IDSEL 0x14 (Slot 2) */ + 0a000 0 0 1 &mpic 0 1 + 0a000 0 0 2 &mpic 1 1 + 0a000 0 0 3 &mpic 2 1 + 0a000 0 0 4 &mpic 3 1 + + /* IDSEL 0x15 (Slot 3) */ + 0a800 0 0 1 &mpic 1 1 + 0a800 0 0 2 &mpic 2 1 + 0a800 0 0 3 &mpic 3 1 + 0a800 0 0 4 &mpic 0 1 + + /* IDSEL 0x16 (Slot 4) */ + 0b000 0 0 1 &mpic 2 1 + 0b000 0 0 2 &mpic 3 1 + 0b000 0 0 3 &mpic 0 1 + 0b000 0 0 4 &mpic 1 1 + + /* IDSEL 0x18 (Slot 5) */ + 0c000 0 0 1 &mpic 0 1 + 0c000 0 0 2 &mpic 1 1 + 0c000 0 0 3 &mpic 2 1 + 0c000 0 0 4 &mpic 3 1 + + /* IDSEL 0x1C (Tsi310 bridge PCI primary) */ + 0E000 0 0 1 &mpic 0 1 + 0E000 0 0 2 &mpic 1 1 + 0E000 0 0 3 &mpic 2 1 + 0E000 0 0 4 &mpic 3 1>; - /* IDSEL 0x10 */ - 08000 0 0 1 &mpic 0 1 - 08000 0 0 2 &mpic 1 1 - 08000 0 0 3 &mpic 2 1 - 08000 0 0 4 &mpic 3 1 - - /* IDSEL 0x11 */ - 08800 0 0 1 &mpic 0 1 - 08800 0 0 2 &mpic 1 1 - 08800 0 0 3 &mpic 2 1 - 08800 0 0 4 &mpic 3 1 - - /* IDSEL 0x12 (Slot 1) */ - 09000 0 0 1 &mpic 0 1 - 09000 0 0 2 &mpic 1 1 - 09000 0 0 3 &mpic 2 1 - 09000 0 0 4 &mpic 3 1 - - /* IDSEL 0x13 (Slot 2) */ - 09800 0 0 1 &mpic 1 1 - 09800 0 0 2 &mpic 2 1 - 09800 0 0 3 &mpic 3 1 - 09800 0 0 4 &mpic 0 1 - - /* IDSEL 0x14 (Slot 3) */ - 0a000 0 0 1 &mpic 2 1 - 0a000 0 0 2 &mpic 3 1 - 0a000 0 0 3 &mpic 0 1 - 0a000 0 0 4 &mpic 1 1 - - /* IDSEL 0x15 (Slot 4) */ - 0a800 0 0 1 &mpic 3 1 - 0a800 0 0 2 &mpic 0 1 - 0a800 0 0 3 &mpic 1 1 - 0a800 0 0 4 &mpic 2 1 - - /* Bus 1 (Tundra Bridge) */ - /* IDSEL 0x12 (ISA bridge) */ - 19000 0 0 1 &mpic 0 1 - 19000 0 0 2 &mpic 1 1 - 19000 0 0 3 &mpic 2 1 - 19000 0 0 4 &mpic 3 1>; interrupt-parent = <&mpic>; interrupts = <18 2>; bus-range = <0 0>; - ranges = <02000000 0 80000000 80000000 0 20000000 - 01000000 0 00000000 e2000000 0 00100000>; + ranges = <02000000 0 80000000 80000000 0 10000000 + 01000000 0 00000000 e2000000 0 00800000>; clock-frequency = <3f940aa>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; reg = <8000 1000>; - compatible = "85xx"; + compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; device_type = "pci"; - i8259@19000 { - clock-frequency = <0>; - interrupt-controller; - device_type = "interrupt-controller"; - reg = <19000 0 0 0 1>; - #address-cells = <0>; - #interrupt-cells = <2>; - built-in; - compatible = "chrp,iic"; - big-endian; - interrupts = <1>; - interrupt-parent = <&pci1>; + pci_bridge@1c { + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x00 (PrPMC Site) */ + 0000 0 0 1 &mpic 0 1 + 0000 0 0 2 &mpic 1 1 + 0000 0 0 3 &mpic 2 1 + 0000 0 0 4 &mpic 3 1 + + /* IDSEL 0x04 (VIA chip) */ + 2000 0 0 1 &mpic 0 1 + 2000 0 0 2 &mpic 1 1 + 2000 0 0 3 &mpic 2 1 + 2000 0 0 4 &mpic 3 1 + + /* IDSEL 0x05 (8139) */ + 2800 0 0 1 &mpic 1 1 + + /* IDSEL 0x06 (Slot 6) */ + 3000 0 0 1 &mpic 2 1 + 3000 0 0 2 &mpic 3 1 + 3000 0 0 3 &mpic 0 1 + 3000 0 0 4 &mpic 1 1 + + /* IDESL 0x07 (Slot 7) */ + 3800 0 0 1 &mpic 3 1 + 3800 0 0 2 &mpic 0 1 + 3800 0 0 3 &mpic 1 1 + 3800 0 0 4 &mpic 2 1>; + + reg = <e000 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + ranges = <02000000 0 80000000 + 02000000 0 80000000 + 0 20000000 + 01000000 0 00000000 + 01000000 0 00000000 + 0 00080000>; + clock-frequency = <1fca055>; + + isa@4 { + device_type = "isa"; + #interrupt-cells = <2>; + #size-cells = <1>; + #address-cells = <2>; + reg = <2000 0 0 0 0>; + ranges = <1 0 01000000 0 0 00001000>; + interrupt-parent = <&i8259>; + + i8259: interrupt-controller@20 { + clock-frequency = <0>; + interrupt-controller; + device_type = "interrupt-controller"; + reg = <1 20 2 + 1 a0 2 + 1 4d0 2>; + #address-cells = <0>; + #interrupt-cells = <2>; + built-in; + compatible = "chrp,iic"; + interrupts = <0 1>; + interrupt-parent = <&mpic>; + }; + + rtc@70 { + compatible = "pnpPNP,b00"; + reg = <1 70 2>; + }; + }; }; }; @@ -263,20 +346,45 @@ /* IDSEL 0x15 */ a800 0 0 1 &mpic b 1 - a800 0 0 2 &mpic b 1 - a800 0 0 3 &mpic b 1 - a800 0 0 4 &mpic b 1>; + a800 0 0 2 &mpic 1 1 + a800 0 0 3 &mpic 2 1 + a800 0 0 4 &mpic 3 1>; + interrupt-parent = <&mpic>; interrupts = <19 2>; bus-range = <0 0>; - ranges = <02000000 0 a0000000 a0000000 0 20000000 - 01000000 0 00000000 e3000000 0 00100000>; + ranges = <02000000 0 90000000 90000000 0 10000000 + 01000000 0 00000000 e2800000 0 00800000>; clock-frequency = <3f940aa>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; reg = <9000 1000>; - compatible = "85xx"; + compatible = "fsl,mpc8540-pci"; + device_type = "pci"; + }; + /* PCI Express */ + pcie@a000 { + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x0 (PEX) */ + 00000 0 0 1 &mpic 0 1 + 00000 0 0 2 &mpic 1 1 + 00000 0 0 3 &mpic 2 1 + 00000 0 0 4 &mpic 3 1>; + + interrupt-parent = <&mpic>; + interrupts = <1a 2>; + bus-range = <0 ff>; + ranges = <02000000 0 a0000000 a0000000 0 20000000 + 01000000 0 00000000 e3000000 0 08000000>; + clock-frequency = <1fca055>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <a000 1000>; + compatible = "fsl,mpc8548-pcie"; device_type = "pci"; }; diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts index 17e45d9..c3c8882 100644 --- a/arch/powerpc/boot/dts/mpc8555cds.dts +++ b/arch/powerpc/boot/dts/mpc8555cds.dts @@ -193,7 +193,7 @@ #size-cells = <2>; #address-cells = <3>; reg = <8000 1000>; - compatible = "85xx"; + compatible = "fsl,mpc8540-pci"; device_type = "pci"; i8259@19000 { @@ -230,7 +230,7 @@ #size-cells = <2>; #address-cells = <3>; reg = <9000 1000>; - compatible = "85xx"; + compatible = "fsl,mpc8540-pci"; device_type = "pci"; }; diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts index 21ccaaa..16dbe84 100644 --- a/arch/powerpc/boot/dts/mpc8560ads.dts +++ b/arch/powerpc/boot/dts/mpc8560ads.dts @@ -136,7 +136,7 @@ #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - compatible = "85xx"; + compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; device_type = "pci"; reg = <8000 1000>; clock-frequency = <3f940aa>; diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts index 6bb18f2..99fa5a0 100644 --- a/arch/powerpc/boot/dts/mpc8568mds.dts +++ b/arch/powerpc/boot/dts/mpc8568mds.dts @@ -170,6 +170,60 @@ interrupt-parent = <&mpic>; }; + pci@8000 { + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + /* IDSEL 0x12 AD18 */ + 9000 0 0 1 &mpic 5 1 + 9000 0 0 2 &mpic 6 1 + 9000 0 0 3 &mpic 7 1 + 9000 0 0 4 &mpic 4 1 + + /* IDSEL 0x13 AD19 */ + 9800 0 0 1 &mpic 6 1 + 9800 0 0 2 &mpic 7 1 + 9800 0 0 3 &mpic 4 1 + 9800 0 0 4 &mpic 5 1>; + + interrupt-parent = <&mpic>; + interrupts = <18 2>; + bus-range = <0 ff>; + ranges = <02000000 0 80000000 80000000 0 20000000 + 01000000 0 00000000 e2000000 0 00800000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <8000 1000>; + compatible = "fsl,mpc8540-pci"; + device_type = "pci"; + }; + + /* PCI Express */ + pcie@a000 { + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x0 (PEX) */ + 00000 0 0 1 &mpic 0 1 + 00000 0 0 2 &mpic 1 1 + 00000 0 0 3 &mpic 2 1 + 00000 0 0 4 &mpic 3 1>; + + interrupt-parent = <&mpic>; + interrupts = <1a 2>; + bus-range = <0 ff>; + ranges = <02000000 0 a0000000 a0000000 0 20000000 + 01000000 0 00000000 e3000000 0 08000000>; + clock-frequency = <1fca055>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <a000 1000>; + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + }; + serial@4600 { device_type = "serial"; compatible = "ns16550"; diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts index 6a78a2b..5d82709 100644 --- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts +++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts @@ -211,8 +211,8 @@ interrupt-parent = <&mpic>; }; - pci@8000 { - compatible = "86xx"; + pcie@8000 { + compatible = "fsl,mpc8641-pcie"; device_type = "pci"; #interrupt-cells = <1>; #size-cells = <2>; @@ -399,8 +399,8 @@ }; - pci@9000 { - compatible = "86xx"; + pcie@9000 { + compatible = "fsl,mpc8641-pcie"; device_type = "pci"; #interrupt-cells = <1>; #size-cells = <2>; diff --git a/arch/powerpc/configs/mpc8544_ds_defconfig b/arch/powerpc/configs/mpc8544_ds_defconfig index c40a25a..7995231 100644 --- a/arch/powerpc/configs/mpc8544_ds_defconfig +++ b/arch/powerpc/configs/mpc8544_ds_defconfig @@ -1,9 +1,26 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22-rc7 -# Sun Jul 1 23:56:58 2007 +# Linux kernel version: 2.6.22 +# Fri Jul 20 14:09:13 2007 # # CONFIG_PPC64 is not set + +# +# Processor support +# +# CONFIG_6xx is not set +CONFIG_PPC_85xx=y +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_85xx=y +CONFIG_E500=y +CONFIG_BOOKE=y +CONFIG_FSL_BOOKE=y +# CONFIG_PHYS_64BIT is not set +# CONFIG_SPE is not set +# CONFIG_PPC_MM_SLICES is not set CONFIG_PPC32=y CONFIG_PPC_MERGE=y CONFIG_MMU=y @@ -14,6 +31,7 @@ CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y @@ -25,28 +43,8 @@ CONFIG_PPC_UDBG_16550=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y - -# -# Processor support -# -# CONFIG_CLASSIC32 is not set -# CONFIG_PPC_82xx is not set -# CONFIG_PPC_83xx is not set -CONFIG_PPC_85xx=y -# CONFIG_PPC_86xx is not set -# CONFIG_PPC_8xx is not set -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_E200 is not set -CONFIG_85xx=y -CONFIG_E500=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set -CONFIG_BOOKE=y -CONFIG_FSL_BOOKE=y -# CONFIG_PHYS_64BIT is not set -# CONFIG_SPE is not set -# CONFIG_PPC_MM_SLICES is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -63,13 +61,12 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -CONFIG_IPC_NS=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set CONFIG_AUDIT=y # CONFIG_AUDITSYSCALL is not set CONFIG_IKCONFIG=y @@ -86,7 +83,7 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_HOTPLUG is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y @@ -105,24 +102,17 @@ CONFIG_SLAB=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -153,7 +143,7 @@ CONFIG_MPC8544_DS=y CONFIG_MPC85xx=y CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set -# CONFIG_PPC_I8259 is not set +CONFIG_PPC_I8259=y # CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set # CONFIG_PPC_MPC106 is not set @@ -191,6 +181,8 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="root=/dev/sda3 rw console=ttyS0,115200" @@ -205,15 +197,21 @@ CONFIG_ISA_DMA_API=y # CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y -CONFIG_PPC_INDIRECT_PCI_BE=y CONFIG_FSL_SOC=y -# CONFIG_PCI is not set -# CONFIG_PCI_DOMAINS is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_FSL_PCI=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_SYSCALL=y +# CONFIG_PCIEPORTBUS is not set +CONFIG_ARCH_SUPPORTS_MSI=y +# CONFIG_PCI_MSI is not set +# CONFIG_PCI_DEBUG is not set # # PCCARD (PCMCIA/CardBus) support # +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set # # Advanced setup @@ -254,7 +252,6 @@ CONFIG_ASK_IP_FIB_HASH=y CONFIG_IP_FIB_HASH=y CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_MULTIPATH=y -# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set CONFIG_IP_ROUTE_VERBOSE=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y @@ -330,6 +327,7 @@ CONFIG_FIB_RULES=y # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -340,45 +338,35 @@ CONFIG_FIB_RULES=y # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set CONFIG_BLK_DEV_NBD=y +# CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=2 CONFIG_BLK_DEV_RAM_SIZE=16384 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# -# CONFIG_BLINK is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set # CONFIG_IDE is not set # @@ -386,6 +374,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y @@ -422,25 +411,120 @@ CONFIG_SCSI_WAIT_SCAN=m # SCSI low-level drivers # # CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SVW is not set +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set +# CONFIG_MD is not set # -# Multi-device support (RAID and LVM) +# Fusion MPT device support # -# CONFIG_MD is not set -# CONFIG_MACINTOSH_DRIVERS is not set +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # -# Network device support +# IEEE 1394 (FireWire) support # +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +# CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_ARCNET is not set CONFIG_PHYLIB=y # @@ -454,17 +538,44 @@ CONFIG_PHYLIB=y CONFIG_VITESSE_PHY=y # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set # CONFIG_FIXED_PHY is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_NET_PCI is not set CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set CONFIG_GIANFAR=y CONFIG_GFAR_NAPI=y +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set CONFIG_NETDEV_10000=y +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TR is not set # # Wireless LAN @@ -472,21 +583,16 @@ CONFIG_NETDEV_10000=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set +# CONFIG_NET_FC is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -521,6 +627,7 @@ CONFIG_INPUT=y CONFIG_SERIO=y CONFIG_SERIO_I8042=y CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set @@ -539,6 +646,7 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -550,14 +658,11 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set @@ -565,12 +670,12 @@ CONFIG_NVRAM=y CONFIG_GEN_RTC=y CONFIG_GEN_RTC_X=y # CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_AGP is not set +# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y # CONFIG_I2C is not set # @@ -578,11 +683,8 @@ CONFIG_GEN_RTC_X=y # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # @@ -655,19 +757,14 @@ CONFIG_DUMMY_CONSOLE=y # Sound # # CONFIG_SOUND is not set - -# -# HID Devices -# +CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_USB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -691,14 +788,7 @@ CONFIG_HID=y # # LED Triggers # - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# +# CONFIG_INFINIBAND is not set # # Real Time Clock @@ -719,19 +809,13 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_TEST is not set # -# I2C RTC drivers -# - -# -# SPI RTC drivers -# - -# # Platform RTC drivers # +# CONFIG_RTC_DRV_CMOS is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -752,6 +836,11 @@ CONFIG_RTC_INTF_DEV=y # # +# Userspace I/O +# +# CONFIG_UIO is not set + +# # File systems # CONFIG_EXT2_FS=y @@ -859,7 +948,6 @@ CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -941,6 +1029,7 @@ CONFIG_BITREVERSE=y # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_PLIST=y @@ -965,6 +1054,7 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_SLAB is not set @@ -996,10 +1086,6 @@ CONFIG_FORCED_INLINING=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y @@ -1038,7 +1124,4 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# +CONFIG_CRYPTO_HW=y diff --git a/arch/powerpc/configs/mpc8568mds_defconfig b/arch/powerpc/configs/mpc8568mds_defconfig index 6451d4d..417d3e6 100644 --- a/arch/powerpc/configs/mpc8568mds_defconfig +++ b/arch/powerpc/configs/mpc8568mds_defconfig @@ -1,9 +1,26 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22-rc7 -# Sun Jul 1 23:56:59 2007 +# Linux kernel version: 2.6.22 +# Fri Jul 20 13:55:04 2007 # # CONFIG_PPC64 is not set + +# +# Processor support +# +# CONFIG_6xx is not set +CONFIG_PPC_85xx=y +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_85xx=y +CONFIG_E500=y +CONFIG_BOOKE=y +CONFIG_FSL_BOOKE=y +# CONFIG_PHYS_64BIT is not set +CONFIG_SPE=y +# CONFIG_PPC_MM_SLICES is not set CONFIG_PPC32=y CONFIG_PPC_MERGE=y CONFIG_MMU=y @@ -14,6 +31,7 @@ CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y @@ -25,28 +43,8 @@ CONFIG_PPC_UDBG_16550=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y - -# -# Processor support -# -# CONFIG_CLASSIC32 is not set -# CONFIG_PPC_82xx is not set -# CONFIG_PPC_83xx is not set -CONFIG_PPC_85xx=y -# CONFIG_PPC_86xx is not set -# CONFIG_PPC_8xx is not set -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_E200 is not set -CONFIG_85xx=y -CONFIG_E500=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set -CONFIG_BOOKE=y -CONFIG_FSL_BOOKE=y -# CONFIG_PHYS_64BIT is not set -CONFIG_SPE=y -# CONFIG_PPC_MM_SLICES is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -63,12 +61,11 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 @@ -100,24 +97,17 @@ CONFIG_SLAB=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set # CONFIG_KMOD is not set - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -186,6 +176,8 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -201,14 +193,20 @@ CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_PPC_INDIRECT_PCI_BE=y CONFIG_FSL_SOC=y -# CONFIG_PCI is not set -# CONFIG_PCI_DOMAINS is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_FSL_PCI=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_SYSCALL=y +# CONFIG_PCIEPORTBUS is not set +CONFIG_ARCH_SUPPORTS_MSI=y +# CONFIG_PCI_MSI is not set +# CONFIG_PCI_DEBUG is not set # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set # # Advanced setup @@ -309,6 +307,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -323,42 +322,31 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32768 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# -# CONFIG_BLINK is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set # CONFIG_IDE is not set # @@ -366,6 +354,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y @@ -402,23 +391,65 @@ CONFIG_SCSI_WAIT_SCAN=m # SCSI low-level drivers # # CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set # CONFIG_ATA is not set +# CONFIG_MD is not set # -# Multi-device support (RAID and LVM) +# Fusion MPT device support # -# CONFIG_MD is not set -# CONFIG_MACINTOSH_DRIVERS is not set +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # -# Network device support +# IEEE 1394 (FireWire) support # +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +# CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_ARCNET is not set CONFIG_PHYLIB=y # @@ -432,17 +463,44 @@ CONFIG_MARVELL_PHY=y # CONFIG_VITESSE_PHY is not set # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set # CONFIG_FIXED_PHY is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_NET_PCI is not set CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set CONFIG_GIANFAR=y CONFIG_GFAR_NAPI=y +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set CONFIG_NETDEV_10000=y +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TR is not set # # Wireless LAN @@ -450,21 +508,16 @@ CONFIG_NETDEV_10000=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set +# CONFIG_NET_FC is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -510,6 +563,7 @@ CONFIG_INPUT=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -521,14 +575,11 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -538,17 +589,23 @@ CONFIG_WATCHDOG=y # # CONFIG_SOFT_WATCHDOG is not set # CONFIG_BOOKE_WDT is not set + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set # CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_AGP is not set +# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y @@ -563,23 +620,43 @@ CONFIG_I2C_CHARDEV=y # # I2C Hardware Bus support # +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set CONFIG_I2C_MPC=y +# CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set # # Miscellaneous I2C Chip support # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_M41T00 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -590,11 +667,8 @@ CONFIG_I2C_MPC=y # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set @@ -628,10 +702,13 @@ CONFIG_HWMON=y # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set @@ -670,19 +747,14 @@ CONFIG_DAB=y # Sound # # CONFIG_SOUND is not set - -# -# HID Devices -# +CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_USB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -706,14 +778,7 @@ CONFIG_HID=y # # LED Triggers # - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# +# CONFIG_INFINIBAND is not set # # Real Time Clock @@ -734,6 +799,11 @@ CONFIG_HID=y # # +# Userspace I/O +# +# CONFIG_UIO is not set + +# # File systems # CONFIG_EXT2_FS=y @@ -829,7 +899,6 @@ CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -868,6 +937,7 @@ CONFIG_BITREVERSE=y # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_PLIST=y CONFIG_HAS_IOMEM=y @@ -892,6 +962,7 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_SLAB is not set @@ -915,7 +986,7 @@ CONFIG_FORCED_INLINING=y CONFIG_DEBUGGER=y # CONFIG_XMON is not set # CONFIG_BDI_SWITCH is not set -CONFIG_BOOTX_TEXT=y +# CONFIG_BOOTX_TEXT is not set CONFIG_PPC_EARLY_DEBUG=y # CONFIG_PPC_EARLY_DEBUG_LPAR is not set # CONFIG_PPC_EARLY_DEBUG_G5 is not set @@ -932,10 +1003,6 @@ CONFIG_PPC_EARLY_DEBUG=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y @@ -973,7 +1040,4 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# +CONFIG_CRYPTO_HW=y diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c index 0adf077..721a694 100644 --- a/arch/powerpc/kernel/pci_32.c +++ b/arch/powerpc/kernel/pci_32.c @@ -415,15 +415,13 @@ probe_resource(struct pci_bus *parent, struct resource *pr, return 0; } -static void __init -update_bridge_base(struct pci_bus *bus, int i) +void __init +update_bridge_resource(struct pci_dev *dev, struct resource *res) { - struct resource *res = bus->resource[i]; u8 io_base_lo, io_limit_lo; u16 mem_base, mem_limit; u16 cmd; unsigned long start, end, off; - struct pci_dev *dev = bus->self; struct pci_controller *hose = dev->sysdata; if (!hose) { @@ -467,12 +465,20 @@ update_bridge_base(struct pci_bus *bus, int i) pci_write_config_word(dev, PCI_PREF_MEMORY_LIMIT, mem_limit); } else { - DBG(KERN_ERR "PCI: ugh, bridge %s res %d has flags=%lx\n", - pci_name(dev), i, res->flags); + DBG(KERN_ERR "PCI: ugh, bridge %s res has flags=%lx\n", + pci_name(dev), res->flags); } pci_write_config_word(dev, PCI_COMMAND, cmd); } +static void __init +update_bridge_base(struct pci_bus *bus, int i) +{ + struct resource *res = bus->resource[i]; + struct pci_dev *dev = bus->self; + update_bridge_resource(dev, res); +} + static inline void alloc_resource(struct pci_dev *dev, int idx) { struct resource *pr, *r = &dev->resource[idx]; @@ -1468,3 +1474,10 @@ EARLY_PCI_OP(read, dword, u32 *) EARLY_PCI_OP(write, byte, u8) EARLY_PCI_OP(write, word, u16) EARLY_PCI_OP(write, dword, u32) + +extern int pci_bus_find_capability (struct pci_bus *bus, unsigned int devfn, int cap); +int early_find_capability(struct pci_controller *hose, int bus, int devfn, + int cap) +{ + return pci_bus_find_capability(fake_pci_bus(hose, bus), devfn, cap); +} diff --git a/arch/powerpc/platforms/82xx/mpc82xx_ads.c b/arch/powerpc/platforms/82xx/mpc82xx_ads.c index da20832..2d1b05b 100644 --- a/arch/powerpc/platforms/82xx/mpc82xx_ads.c +++ b/arch/powerpc/platforms/82xx/mpc82xx_ads.c @@ -553,7 +553,8 @@ static void __init mpc82xx_add_bridge(struct device_node *np) setup_indirect_pci(hose, r.start + offsetof(pci_cpm2_t, pci_cfg_addr), - r.start + offsetof(pci_cpm2_t, pci_cfg_data)); + r.start + offsetof(pci_cpm2_t, pci_cfg_data), + 0); pci_process_bridge_OF_ranges(hose, np, 1); } diff --git a/arch/powerpc/platforms/83xx/pci.c b/arch/powerpc/platforms/83xx/pci.c index c0e2b89..9206946 100644 --- a/arch/powerpc/platforms/83xx/pci.c +++ b/arch/powerpc/platforms/83xx/pci.c @@ -74,11 +74,11 @@ int __init mpc83xx_add_bridge(struct device_node *dev) */ /* PCI 1 */ if ((rsrc.start & 0xfffff) == 0x8500) { - setup_indirect_pci(hose, immr + 0x8300, immr + 0x8304); + setup_indirect_pci(hose, immr + 0x8300, immr + 0x8304, 0); } /* PCI 2 */ if ((rsrc.start & 0xfffff) == 0x8600) { - setup_indirect_pci(hose, immr + 0x8380, immr + 0x8384); + setup_indirect_pci(hose, immr + 0x8380, immr + 0x8384, 0); primary = 0; } diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index 629926e..f581840 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -18,6 +18,7 @@ config MPC8560_ADS config MPC85xx_CDS bool "Freescale MPC85xx CDS" select DEFAULT_UIMAGE + select PPC_I8259 help This option enables support for the MPC85xx CDS board @@ -30,6 +31,7 @@ config MPC85xx_MDS config MPC8544_DS bool "Freescale MPC8544 DS" + select PPC_I8259 select DEFAULT_UIMAGE help This option enables support for the MPC8544 DS board @@ -50,9 +52,9 @@ config MPC8560 config MPC85xx bool select PPC_UDBG_16550 - select PPC_INDIRECT_PCI - select PPC_INDIRECT_PCI_BE + select PPC_INDIRECT_PCI if PCI select MPIC + select FSL_PCI if PCI select SERIAL_8250_SHARE_IRQ if SERIAL_8250 default y if MPC8540_ADS || MPC85xx_CDS || MPC8560_ADS \ || MPC85xx_MDS || MPC8544_DS diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index 4e02cbb..d70f2d0 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -1,7 +1,7 @@ # # Makefile for the PowerPC 85xx linux kernel. # -obj-$(CONFIG_PPC_85xx) += misc.o pci.o +obj-$(CONFIG_PPC_85xx) += misc.o obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o diff --git a/arch/powerpc/platforms/85xx/mpc8544_ds.c b/arch/powerpc/platforms/85xx/mpc8544_ds.c index 6fb90aa..4905f6f 100644 --- a/arch/powerpc/platforms/85xx/mpc8544_ds.c +++ b/arch/powerpc/platforms/85xx/mpc8544_ds.c @@ -2,6 +2,8 @@ * MPC8544 DS Board Setup * * Author Xianghua Xiao (x.xiao@freescale.com) + * Roy Zang <tie-fei.zang@freescale.com> + * - Add PCI/PCI Exprees support * Copyright 2007 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it @@ -12,13 +14,16 @@ #include <linux/stddef.h> #include <linux/kernel.h> +#include <linux/pci.h> #include <linux/kdev_t.h> #include <linux/delay.h> #include <linux/seq_file.h> +#include <linux/interrupt.h> #include <asm/system.h> #include <asm/time.h> #include <asm/machdep.h> +#include <asm/pci-bridge.h> #include <asm/mpc85xx.h> #include <mm/mmu_decl.h> #include <asm/prom.h> @@ -27,6 +32,7 @@ #include <asm/i8259.h> #include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> #include "mpc85xx.h" #undef DEBUG @@ -37,6 +43,17 @@ #define DBG(fmt, args...) #endif +#ifdef CONFIG_PPC_I8259 +static void mpc8544_8259_cascade(unsigned int irq, struct irq_desc *desc) +{ + unsigned int cascade_irq = i8259_irq(); + + if (cascade_irq != NO_IRQ) { + generic_handle_irq(cascade_irq); + } + desc->chip->eoi(irq); +} +#endif /* CONFIG_PPC_I8259 */ void __init mpc8544_ds_pic_init(void) { @@ -96,19 +113,240 @@ void __init mpc8544_ds_pic_init(void) #endif /* CONFIG_PPC_I8259 */ } +#ifdef CONFIG_PCI +enum pirq { PIRQA = 8, PIRQB, PIRQC, PIRQD, PIRQE, PIRQF, PIRQG, PIRQH }; + +/* + * Value in table -- IRQ number + */ +const unsigned char uli1575_irq_route_table[16] = { + 0, /* 0: Reserved */ + 0x8, + 0, /* 2: Reserved */ + 0x2, + 0x4, + 0x5, + 0x7, + 0x6, + 0, /* 8: Reserved */ + 0x1, + 0x3, + 0x9, + 0xb, + 0, /* 13: Reserved */ + 0xd, + 0xf, +}; + +static int __devinit +get_pci_irq_from_of(struct pci_controller *hose, int slot, int pin) +{ + struct of_irq oirq; + u32 laddr[3]; + struct device_node *hosenode = hose ? hose->arch_data : NULL; + + if (!hosenode) + return -EINVAL; + + laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(slot, 0) << 8); + laddr[1] = laddr[2] = 0; + of_irq_map_raw(hosenode, &pin, 1, laddr, &oirq); + DBG("mpc8544_ds: pci irq addr %x, slot %d, pin %d, irq %d\n", + laddr[0], slot, pin, oirq.specifier[0]); + return oirq.specifier[0]; +} + +/*8259*/ +static void __devinit quirk_uli1575(struct pci_dev *dev) +{ + unsigned short temp; + struct pci_controller *hose = pci_bus_to_host(dev->bus); + unsigned char irq2pin[16]; + unsigned long pirq_map_word = 0; + u32 irq; + int i; + + /* + * ULI1575 interrupts route setup + */ + memset(irq2pin, 0, 16); /* Initialize default value 0 */ + + irq2pin[6]=PIRQA+3; /* enabled mapping for IRQ6 to PIRQD, used by SATA */ + + /* + * PIRQE -> PIRQF mapping set manually + * + * IRQ pin IRQ# + * PIRQE ---- 9 + * PIRQF ---- 10 + * PIRQG ---- 11 + * PIRQH ---- 12 + */ + for (i = 0; i < 4; i++) + irq2pin[i + 9] = PIRQE + i; + + /* Set IRQ-PIRQ Mapping to ULI1575 */ + for (i = 0; i < 16; i++) + if (irq2pin[i]) + pirq_map_word |= (uli1575_irq_route_table[i] & 0xf) + << ((irq2pin[i] - PIRQA) * 4); + + pirq_map_word |= 1<<26; /* disable INTx in EP mode*/ + + /* ULI1575 IRQ mapping conf register default value is 0xb9317542 */ + DBG("Setup ULI1575 IRQ mapping configuration register value = 0x%x\n", + (int)pirq_map_word); + pci_write_config_dword(dev, 0x48, pirq_map_word); + +#define ULI1575_SET_DEV_IRQ(slot, pin, reg) \ + do { \ + int irq; \ + irq = get_pci_irq_from_of(hose, slot, pin); \ + if (irq > 0 && irq < 16) \ + pci_write_config_byte(dev, reg, irq2pin[irq]); \ + else \ + printk(KERN_WARNING "ULI1575 device" \ + "(slot %d, pin %d) irq %d is invalid.\n", \ + slot, pin, irq); \ + } while(0) + + /* USB 1.1 OHCI controller 1, slot 28, pin 1 */ + ULI1575_SET_DEV_IRQ(28, 1, 0x86); + + /* USB 1.1 OHCI controller 2, slot 28, pin 2 */ + ULI1575_SET_DEV_IRQ(28, 2, 0x87); + + /* USB 1.1 OHCI controller 3, slot 28, pin 3 */ + ULI1575_SET_DEV_IRQ(28, 3, 0x88); + + /* USB 2.0 controller, slot 28, pin 4 */ + irq = get_pci_irq_from_of(hose, 28, 4); + if (irq >= 0 && irq <= 15) + pci_write_config_dword(dev, 0x74, uli1575_irq_route_table[irq]); + + /* Audio controller, slot 29, pin 1 */ + ULI1575_SET_DEV_IRQ(29, 1, 0x8a); + + /* Modem controller, slot 29, pin 2 */ + ULI1575_SET_DEV_IRQ(29, 2, 0x8b); + + /* HD audio controller, slot 29, pin 3 */ + ULI1575_SET_DEV_IRQ(29, 3, 0x8c); + + /* SMB interrupt: slot 30, pin 1 */ + ULI1575_SET_DEV_IRQ(30, 1, 0x8e); + + /* PMU ACPI SCI interrupt: slot 30, pin 2 */ + ULI1575_SET_DEV_IRQ(30, 2, 0x8f); + + /* Serial ATA interrupt: slot 31, pin 1 */ + ULI1575_SET_DEV_IRQ(31, 1, 0x8d); + + /* Primary PATA IDE IRQ: 14 + * Secondary PATA IDE IRQ: 15 + */ + pci_write_config_byte(dev, 0x44, 0x30 | uli1575_irq_route_table[14]); + pci_write_config_byte(dev, 0x75, uli1575_irq_route_table[15]); + + /* Set IRQ14 and IRQ15 to legacy IRQs */ + pci_read_config_word(dev, 0x46, &temp); + temp |= 0xc000; + pci_write_config_word(dev, 0x46, temp); + + /* Set i8259 interrupt trigger + * IRQ 3: Level + * IRQ 4: Level + * IRQ 5: Level + * IRQ 6: Level + * IRQ 7: Level + * IRQ 9: Level + * IRQ 10: Level + * IRQ 11: Level + * IRQ 12: Level + * IRQ 14: Edge + * IRQ 15: Edge + */ + outb(0xfa, 0x4d0); + outb(0x1e, 0x4d1); + +#undef ULI1575_SET_DEV_IRQ +} + +/* SATA */ +static void __devinit quirk_uli5288(struct pci_dev *dev) +{ + unsigned char c; + + pci_read_config_byte(dev, 0x83, &c); + c |= 0x80; /* read/write lock */ + pci_write_config_byte(dev, 0x83, c); + + pci_write_config_byte(dev, 0x09, 0x01); /* Base class code: storage */ + pci_write_config_byte(dev, 0x0a, 0x06); /* IDE disk */ + + pci_read_config_byte(dev, 0x83, &c); + c &= 0x7f; + pci_write_config_byte(dev, 0x83, c); + + pci_read_config_byte(dev, 0x84, &c); + c |= 0x01; /* emulated PATA mode enabled */ + pci_write_config_byte(dev, 0x84, c); +} + +/* PATA */ +static void __devinit quirk_uli5229(struct pci_dev *dev) +{ + unsigned short temp; + pci_write_config_word(dev, 0x04, 0x0405); /* MEM IO MSI */ + pci_read_config_word(dev, 0x4a, &temp); + temp |= 0x1000; /* Enable Native IRQ 14/15 */ + pci_write_config_word(dev, 0x4a, temp); +} + +/*Bridge*/ +static void __devinit early_uli5249(struct pci_dev *dev) +{ + unsigned char temp; + pci_write_config_word(dev, 0x04, 0x0007); /* mem access */ + pci_read_config_byte(dev, 0x7c, &temp); + pci_write_config_byte(dev, 0x7c, 0x80); /* R/W lock control */ + pci_write_config_byte(dev, 0x09, 0x01); /* set as pci-pci bridge */ + pci_write_config_byte(dev, 0x7c, temp); /* restore pci bus debug control */ + dev->class |= 0x1; +} + +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_uli1575); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, 0x5249, early_uli5249); +#endif /* CONFIG_PCI */ /* * Setup the architecture */ static void __init mpc8544_ds_setup_arch(void) { +#ifdef CONFIG_PCI + struct device_node *np; +#endif + if (ppc_md.progress) ppc_md.progress("mpc8544_ds_setup_arch()", 0); +#ifdef CONFIG_PCI + for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) { + struct resource rsrc; + of_address_to_resource(np, 0, &rsrc); + if ((rsrc.start & 0xfffff) == 0xb000) + fsl_add_bridge(np, 1); + else + fsl_add_bridge(np, 0); + } +#endif + printk("MPC8544 DS board from Freescale Semiconductor\n"); } - /* * Called very early, device-tree isn't unflattened */ @@ -124,6 +362,7 @@ define_machine(mpc8544_ds) { .probe = mpc8544_ds_probe, .setup_arch = mpc8544_ds_setup_arch, .init_IRQ = mpc8544_ds_pic_init, + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, .get_irq = mpic_get_irq, .restart = mpc85xx_restart, .calibrate_decr = generic_calibrate_decr, diff --git a/arch/powerpc/platforms/85xx/mpc85xx.h b/arch/powerpc/platforms/85xx/mpc85xx.h index 7286ffa..5b34dee 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx.h +++ b/arch/powerpc/platforms/85xx/mpc85xx.h @@ -15,4 +15,3 @@ */ extern void mpc85xx_restart(char *); -extern int mpc85xx_add_bridge(struct device_node *dev); diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c index 7235f70..40a8286 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c @@ -29,6 +29,7 @@ #include <asm/udbg.h> #include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> #include "mpc85xx.h" #ifdef CONFIG_CPM2 @@ -217,7 +218,7 @@ static void __init mpc85xx_ads_setup_arch(void) #ifdef CONFIG_PCI for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) - mpc85xx_add_bridge(np); + fsl_add_bridge(np, 1); ppc_md.pci_exclude_device = mpc85xx_exclude_device; #endif } diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c index 50c8d64..6a171e9 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c @@ -24,6 +24,7 @@ #include <linux/seq_file.h> #include <linux/initrd.h> #include <linux/module.h> +#include <linux/interrupt.h> #include <linux/fsl_devices.h> #include <asm/system.h> @@ -45,6 +46,7 @@ #include <asm/i8259.h> #include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> #include "mpc85xx.h" static int cds_pci_slot = 2; @@ -58,8 +60,6 @@ static volatile u8 *cadmus; static int mpc85xx_exclude_device(struct pci_controller *hose, u_char bus, u_char devfn) { - if ((bus == hose->first_busno) && PCI_SLOT(devfn) == 0) - return PCIBIOS_DEVICE_NOT_FOUND; /* We explicitly do not go past the Tundra 320 Bridge */ if ((bus == 1) && (PCI_SLOT(devfn) == ARCADIA_2ND_BRIDGE_IDSEL)) return PCIBIOS_DEVICE_NOT_FOUND; @@ -69,6 +69,37 @@ static int mpc85xx_exclude_device(struct pci_controller *hose, return PCIBIOS_SUCCESSFUL; } +static void mpc85xx_cds_restart(char *cmd) +{ + struct pci_dev *dev; + u_char tmp; + + if ((dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, + NULL))) { + + /* Use the VIA Super Southbridge to force a PCI reset */ + pci_read_config_byte(dev, 0x47, &tmp); + pci_write_config_byte(dev, 0x47, tmp | 1); + + /* Flush the outbound PCI write queues */ + pci_read_config_byte(dev, 0x47, &tmp); + + /* + * At this point, the harware reset should have triggered. + * However, if it doesn't work for some mysterious reason, + * just fall through to the default reset below. + */ + + pci_dev_put(dev); + } + + /* + * If we can't find the VIA chip (maybe the P2P bridge is disabled) + * or the VIA chip reset didn't work, just use the default reset. + */ + mpc85xx_restart(NULL); +} + static void __init mpc85xx_cds_pci_irq_fixup(struct pci_dev *dev) { u_char c; @@ -98,7 +129,7 @@ static void __init mpc85xx_cds_pci_irq_fixup(struct pci_dev *dev) /* There are two USB controllers. * Identify them by functon number */ - if (PCI_FUNC(dev->devfn)) + if (PCI_FUNC(dev->devfn) == 3) dev->irq = 11; else dev->irq = 10; @@ -109,17 +140,41 @@ static void __init mpc85xx_cds_pci_irq_fixup(struct pci_dev *dev) } } +static void __devinit skip_fake_bridge(struct pci_dev *dev) +{ + /* Make it an error to skip the fake bridge + * in pci_setup_device() in probe.c */ + dev->hdr_type = 0x7f; +} +DECLARE_PCI_FIXUP_EARLY(0x1957, 0x3fff, skip_fake_bridge); +DECLARE_PCI_FIXUP_EARLY(0x3fff, 0x1957, skip_fake_bridge); +DECLARE_PCI_FIXUP_EARLY(0xff3f, 0x5719, skip_fake_bridge); + #ifdef CONFIG_PPC_I8259 -#warning The i8259 PIC support is currently broken -static void mpc85xx_8259_cascade(unsigned int irq, struct irq_desc *desc) +static void mpc85xx_8259_cascade_handler(unsigned int irq, + struct irq_desc *desc) { unsigned int cascade_irq = i8259_irq(); if (cascade_irq != NO_IRQ) + /* handle an interrupt from the 8259 */ generic_handle_irq(cascade_irq); - desc->chip->eoi(irq); + /* check for any interrupts from the shared IRQ line */ + handle_fasteoi_irq(irq, desc); +} + +static irqreturn_t mpc85xx_8259_cascade_action(int irq, void *dev_id) +{ + return IRQ_HANDLED; } + +static struct irqaction mpc85xxcds_8259_irqaction = { + .handler = mpc85xx_8259_cascade_action, + .flags = IRQF_SHARED, + .mask = CPU_MASK_NONE, + .name = "8259 cascade", +}; #endif /* PPC_I8259 */ #endif /* CONFIG_PCI */ @@ -128,10 +183,6 @@ static void __init mpc85xx_cds_pic_init(void) struct mpic *mpic; struct resource r; struct device_node *np = NULL; -#ifdef CONFIG_PPC_I8259 - struct device_node *cascade_node = NULL; - int cascade_irq; -#endif np = of_find_node_by_type(np, "open-pic"); @@ -155,8 +206,19 @@ static void __init mpc85xx_cds_pic_init(void) of_node_put(np); mpic_init(mpic); +} + +#if defined(CONFIG_PPC_I8259) && defined(CONFIG_PCI) +static int mpc85xx_cds_8259_attach(void) +{ + int ret; + struct device_node *np = NULL; + struct device_node *cascade_node = NULL; + int cascade_irq; + + if (!machine_is(mpc85xx_cds)) + return 0; -#ifdef CONFIG_PPC_I8259 /* Initialize the i8259 controller */ for_each_node_by_type(np, "interrupt-controller") if (of_device_is_compatible(np, "chrp,iic")) { @@ -166,22 +228,39 @@ static void __init mpc85xx_cds_pic_init(void) if (cascade_node == NULL) { printk(KERN_DEBUG "Could not find i8259 PIC\n"); - return; + return -ENODEV; } cascade_irq = irq_of_parse_and_map(cascade_node, 0); if (cascade_irq == NO_IRQ) { printk(KERN_ERR "Failed to map cascade interrupt\n"); - return; + return -ENXIO; } i8259_init(cascade_node, 0); of_node_put(cascade_node); - set_irq_chained_handler(cascade_irq, mpc85xx_8259_cascade); -#endif /* CONFIG_PPC_I8259 */ + /* + * Hook the interrupt to make sure desc->action is never NULL. + * This is required to ensure that the interrupt does not get + * disabled when the last user of the shared IRQ line frees their + * interrupt. + */ + if ((ret = setup_irq(cascade_irq, &mpc85xxcds_8259_irqaction))) { + printk(KERN_ERR "Failed to setup cascade interrupt\n"); + return ret; + } + + /* Success. Connect our low-level cascade handler. */ + set_irq_handler(cascade_irq, mpc85xx_8259_cascade_handler); + + return 0; } +device_initcall(mpc85xx_cds_8259_attach); + +#endif /* CONFIG_PPC_I8259 */ + /* * Setup the architecture */ @@ -218,9 +297,14 @@ static void __init mpc85xx_cds_setup_arch(void) } #ifdef CONFIG_PCI - for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) - mpc85xx_add_bridge(np); - + for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) { + struct resource rsrc; + of_address_to_resource(np, 0, &rsrc); + if ((rsrc.start & 0xfffff) == 0x8000) + fsl_add_bridge(np, 1); + else + fsl_add_bridge(np, 0); + } ppc_md.pci_irq_fixup = mpc85xx_cds_pci_irq_fixup; ppc_md.pci_exclude_device = mpc85xx_exclude_device; #endif @@ -265,7 +349,12 @@ define_machine(mpc85xx_cds) { .init_IRQ = mpc85xx_cds_pic_init, .show_cpuinfo = mpc85xx_cds_show_cpuinfo, .get_irq = mpic_get_irq, +#ifdef CONFIG_PCI + .restart = mpc85xx_cds_restart, +#else .restart = mpc85xx_restart, +#endif .calibrate_decr = generic_calibrate_decr, .progress = udbg_progress, + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, }; diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c index 004b80b..e8003bf 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c @@ -46,6 +46,7 @@ #include <asm/prom.h> #include <asm/udbg.h> #include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> #include <asm/qe.h> #include <asm/qe_ic.h> #include <asm/mpic.h> @@ -94,9 +95,8 @@ static void __init mpc85xx_mds_setup_arch(void) } #ifdef CONFIG_PCI - for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) { - mpc85xx_add_bridge(np); - } + for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) + fsl_add_bridge(np, 1); of_node_put(np); #endif @@ -208,4 +208,5 @@ define_machine(mpc85xx_mds) { .restart = mpc85xx_restart, .calibrate_decr = generic_calibrate_decr, .progress = udbg_progress, + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, }; diff --git a/arch/powerpc/platforms/85xx/pci.c b/arch/powerpc/platforms/85xx/pci.c deleted file mode 100644 index 8118417..0000000 --- a/arch/powerpc/platforms/85xx/pci.c +++ /dev/null @@ -1,91 +0,0 @@ -/* - * FSL SoC setup code - * - * Maintained by Kumar Gala (see MAINTAINERS for contact information) - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/stddef.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/pci.h> -#include <linux/delay.h> -#include <linux/irq.h> -#include <linux/module.h> - -#include <asm/system.h> -#include <asm/atomic.h> -#include <asm/io.h> -#include <asm/pci-bridge.h> -#include <asm/prom.h> -#include <sysdev/fsl_soc.h> - -#undef DEBUG - -#ifdef DEBUG -#define DBG(x...) printk(x) -#else -#define DBG(x...) -#endif - -#ifdef CONFIG_PCI -int __init mpc85xx_add_bridge(struct device_node *dev) -{ - int len; - struct pci_controller *hose; - struct resource rsrc; - const int *bus_range; - int primary = 1, has_address = 0; - phys_addr_t immr = get_immrbase(); - - DBG("Adding PCI host bridge %s\n", dev->full_name); - - /* Fetch host bridge registers address */ - has_address = (of_address_to_resource(dev, 0, &rsrc) == 0); - - /* Get bus range if any */ - bus_range = of_get_property(dev, "bus-range", &len); - if (bus_range == NULL || len < 2 * sizeof(int)) { - printk(KERN_WARNING "Can't get bus-range for %s, assume" - " bus 0\n", dev->full_name); - } - - pci_assign_all_buses = 1; - hose = pcibios_alloc_controller(dev); - if (!hose) - return -ENOMEM; - - hose->first_busno = bus_range ? bus_range[0] : 0; - hose->last_busno = bus_range ? bus_range[1] : 0xff; - - /* PCI 1 */ - if ((rsrc.start & 0xfffff) == 0x8000) { - setup_indirect_pci(hose, immr + 0x8000, immr + 0x8004); - } - /* PCI 2 */ - if ((rsrc.start & 0xfffff) == 0x9000) { - setup_indirect_pci(hose, immr + 0x9000, immr + 0x9004); - primary = 0; - } - - printk(KERN_INFO "Found MPC85xx PCI host bridge at 0x%016llx. " - "Firmware bus number: %d->%d\n", - (unsigned long long)rsrc.start, hose->first_busno, - hose->last_busno); - - DBG(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n", - hose, hose->cfg_addr, hose->cfg_data); - - /* Interpret the "ranges" property */ - /* This also maps the I/O region and sets isa_io/mem_base */ - pci_process_bridge_OF_ranges(hose, dev, primary); - - return 0; -} - -#endif diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig index 0faebfd..343b76d 100644 --- a/arch/powerpc/platforms/86xx/Kconfig +++ b/arch/powerpc/platforms/86xx/Kconfig @@ -14,8 +14,7 @@ endchoice config MPC8641 bool - select PPC_INDIRECT_PCI - select PPC_INDIRECT_PCI_BE + select FSL_PCI if PCI select PPC_UDBG_16550 select MPIC default y if MPC8641_HPCN diff --git a/arch/powerpc/platforms/86xx/Makefile b/arch/powerpc/platforms/86xx/Makefile index 418fd8f..3376c77 100644 --- a/arch/powerpc/platforms/86xx/Makefile +++ b/arch/powerpc/platforms/86xx/Makefile @@ -4,4 +4,3 @@ obj-$(CONFIG_SMP) += mpc86xx_smp.o obj-$(CONFIG_MPC8641_HPCN) += mpc86xx_hpcn.o -obj-$(CONFIG_PCI) += pci.o diff --git a/arch/powerpc/platforms/86xx/mpc86xx.h b/arch/powerpc/platforms/86xx/mpc86xx.h index 23f7ed2..525ffa1 100644 --- a/arch/powerpc/platforms/86xx/mpc86xx.h +++ b/arch/powerpc/platforms/86xx/mpc86xx.h @@ -15,11 +15,6 @@ * mpc86xx_* files. Mostly for use by mpc86xx_setup(). */ -extern int mpc86xx_add_bridge(struct device_node *dev); - -extern int mpc86xx_exclude_device(struct pci_controller *hose, - u_char bus, u_char devfn); - extern void __init mpc86xx_smp_init(void); #endif /* __MPC86XX_H__ */ diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c index 5b01ec7..e9eaa07 100644 --- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c +++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c @@ -31,6 +31,7 @@ #include <asm/mpic.h> +#include <sysdev/fsl_pci.h> #include <sysdev/fsl_soc.h> #include "mpc86xx.h" @@ -344,8 +345,14 @@ mpc86xx_hpcn_setup_arch(void) } #ifdef CONFIG_PCI - for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) - mpc86xx_add_bridge(np); + for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) { + struct resource rsrc; + of_address_to_resource(np, 0, &rsrc); + if ((rsrc.start & 0xfffff) == 0x8000) + fsl_add_bridge(np, 1); + else + fsl_add_bridge(np, 0); + } #endif printk("MPC86xx HPCN board from Freescale Semiconductor\n"); @@ -424,7 +431,6 @@ mpc86xx_time_init(void) return 0; } - define_machine(mpc86xx_hpcn) { .name = "MPC86xx HPCN", .probe = mpc86xx_hpcn_probe, @@ -436,4 +442,5 @@ define_machine(mpc86xx_hpcn) { .time_init = mpc86xx_time_init, .calibrate_decr = generic_calibrate_decr, .progress = udbg_progress, + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, }; diff --git a/arch/powerpc/platforms/86xx/pci.c b/arch/powerpc/platforms/86xx/pci.c deleted file mode 100644 index 73cd5b05..0000000 --- a/arch/powerpc/platforms/86xx/pci.c +++ /dev/null @@ -1,238 +0,0 @@ -/* - * MPC86XX pci setup code - * - * Recode: ZHANG WEI <wei.zhang@freescale.com> - * Initial author: Xianghua Xiao <x.xiao@freescale.com> - * - * Copyright 2006 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/types.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/serial.h> - -#include <asm/system.h> -#include <asm/atomic.h> -#include <asm/io.h> -#include <asm/prom.h> -#include <asm/pci-bridge.h> -#include <sysdev/fsl_soc.h> -#include <sysdev/fsl_pcie.h> - -#include "mpc86xx.h" - -#undef DEBUG - -#ifdef DEBUG -#define DBG(fmt, args...) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args) -#else -#define DBG(fmt, args...) -#endif - -struct pcie_outbound_window_regs { - uint pexotar; /* 0x.0 - PCI Express outbound translation address register */ - uint pexotear; /* 0x.4 - PCI Express outbound translation extended address register */ - uint pexowbar; /* 0x.8 - PCI Express outbound window base address register */ - char res1[4]; - uint pexowar; /* 0x.10 - PCI Express outbound window attributes register */ - char res2[12]; -}; - -struct pcie_inbound_window_regs { - uint pexitar; /* 0x.0 - PCI Express inbound translation address register */ - char res1[4]; - uint pexiwbar; /* 0x.8 - PCI Express inbound window base address register */ - uint pexiwbear; /* 0x.c - PCI Express inbound window base extended address register */ - uint pexiwar; /* 0x.10 - PCI Express inbound window attributes register */ - char res2[12]; -}; - -static void __init setup_pcie_atmu(struct pci_controller *hose, struct resource *rsrc) -{ - volatile struct ccsr_pex *pcie; - volatile struct pcie_outbound_window_regs *pcieow; - volatile struct pcie_inbound_window_regs *pcieiw; - int i = 0; - - DBG("PCIE memory map start 0x%x, size 0x%x\n", rsrc->start, - rsrc->end - rsrc->start + 1); - pcie = ioremap(rsrc->start, rsrc->end - rsrc->start + 1); - - /* Disable all windows (except pexowar0 since its ignored) */ - pcie->pexowar1 = 0; - pcie->pexowar2 = 0; - pcie->pexowar3 = 0; - pcie->pexowar4 = 0; - pcie->pexiwar1 = 0; - pcie->pexiwar2 = 0; - pcie->pexiwar3 = 0; - - pcieow = (struct pcie_outbound_window_regs *)&pcie->pexotar1; - pcieiw = (struct pcie_inbound_window_regs *)&pcie->pexitar1; - - /* Setup outbound MEM window */ - for(i = 0; i < 3; i++) - if (hose->mem_resources[i].flags & IORESOURCE_MEM){ - DBG("PCIE MEM resource start 0x%08x, size 0x%08x.\n", - hose->mem_resources[i].start, - hose->mem_resources[i].end - - hose->mem_resources[i].start + 1); - pcieow->pexotar = (hose->mem_resources[i].start) >> 12 - & 0x000fffff; - pcieow->pexotear = 0; - pcieow->pexowbar = (hose->mem_resources[i].start) >> 12 - & 0x000fffff; - /* Enable, Mem R/W */ - pcieow->pexowar = 0x80044000 | - (__ilog2(hose->mem_resources[i].end - - hose->mem_resources[i].start + 1) - - 1); - pcieow++; - } - - /* Setup outbound IO window */ - if (hose->io_resource.flags & IORESOURCE_IO){ - DBG("PCIE IO resource start 0x%08x, size 0x%08x, phy base 0x%08x.\n", - hose->io_resource.start, - hose->io_resource.end - hose->io_resource.start + 1, - hose->io_base_phys); - pcieow->pexotar = (hose->io_resource.start) >> 12 & 0x000fffff; - pcieow->pexotear = 0; - pcieow->pexowbar = (hose->io_base_phys) >> 12 & 0x000fffff; - /* Enable, IO R/W */ - pcieow->pexowar = 0x80088000 | (__ilog2(hose->io_resource.end - - hose->io_resource.start + 1) - 1); - } - - /* Setup 2G inbound Memory Window @ 0 */ - pcieiw->pexitar = 0x00000000; - pcieiw->pexiwbar = 0x00000000; - /* Enable, Prefetch, Local Mem, Snoop R/W, 2G */ - pcieiw->pexiwar = 0xa0f5501e; -} - -static void __init -mpc86xx_setup_pcie(struct pci_controller *hose, u32 pcie_offset, u32 pcie_size) -{ - u16 cmd; - - DBG("PCIE host controller register offset 0x%08x, size 0x%08x.\n", - pcie_offset, pcie_size); - - early_read_config_word(hose, 0, 0, PCI_COMMAND, &cmd); - cmd |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY - | PCI_COMMAND_IO; - early_write_config_word(hose, 0, 0, PCI_COMMAND, cmd); - - early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0x80); -} - -static void __devinit quirk_fsl_pcie_transparent(struct pci_dev *dev) -{ - struct resource *res; - int i, res_idx = PCI_BRIDGE_RESOURCES; - struct pci_controller *hose; - - /* - * Make the bridge be transparent. - */ - dev->transparent = 1; - - hose = pci_bus_to_host(dev->bus); - if (!hose) { - printk(KERN_ERR "Can't find hose for bus %d\n", - dev->bus->number); - return; - } - - if (hose->io_resource.flags) { - res = &dev->resource[res_idx++]; - res->start = hose->io_resource.start; - res->end = hose->io_resource.end; - res->flags = hose->io_resource.flags; - } - - for (i = 0; i < 3; i++) { - res = &dev->resource[res_idx + i]; - res->start = hose->mem_resources[i].start; - res->end = hose->mem_resources[i].end; - res->flags = hose->mem_resources[i].flags; - } -} - - -DECLARE_PCI_FIXUP_EARLY(0x1957, 0x7010, quirk_fsl_pcie_transparent); -DECLARE_PCI_FIXUP_EARLY(0x1957, 0x7011, quirk_fsl_pcie_transparent); - -#define PCIE_LTSSM 0x404 /* PCIe Link Training and Status */ -#define PCIE_LTSSM_L0 0x16 /* L0 state */ - -int __init mpc86xx_add_bridge(struct device_node *dev) -{ - int len; - struct pci_controller *hose; - struct resource rsrc; - const int *bus_range; - int has_address = 0; - int primary = 0; - u16 val; - - DBG("Adding PCIE host bridge %s\n", dev->full_name); - - /* Fetch host bridge registers address */ - has_address = (of_address_to_resource(dev, 0, &rsrc) == 0); - - /* Get bus range if any */ - bus_range = of_get_property(dev, "bus-range", &len); - if (bus_range == NULL || len < 2 * sizeof(int)) - printk(KERN_WARNING "Can't get bus-range for %s, assume" - " bus 0\n", dev->full_name); - - pci_assign_all_buses = 1; - hose = pcibios_alloc_controller(dev); - if (!hose) - return -ENOMEM; - - hose->indirect_type = PPC_INDIRECT_TYPE_EXT_REG | - PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS; - - hose->first_busno = bus_range ? bus_range[0] : 0x0; - hose->last_busno = bus_range ? bus_range[1] : 0xff; - - setup_indirect_pci(hose, rsrc.start, rsrc.start + 0x4); - - /* Probe the hose link training status */ - early_read_config_word(hose, 0, 0, PCIE_LTSSM, &val); - if (val < PCIE_LTSSM_L0) - return -ENXIO; - - /* Setup the PCIE host controller. */ - mpc86xx_setup_pcie(hose, rsrc.start, rsrc.end - rsrc.start + 1); - - if ((rsrc.start & 0xfffff) == 0x8000) - primary = 1; - - printk(KERN_INFO "Found MPC86xx PCIE host bridge at 0x%08lx. " - "Firmware bus number: %d->%d\n", - (unsigned long) rsrc.start, - hose->first_busno, hose->last_busno); - - DBG(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n", - hose, hose->cfg_addr, hose->cfg_data); - - /* Interpret the "ranges" property */ - /* This also maps the I/O region and sets isa_io/mem_base */ - pci_process_bridge_OF_ranges(hose, dev, primary); - - /* Setup PEX window registers */ - setup_pcie_atmu(hose, &rsrc); - - return 0; -} diff --git a/arch/powerpc/platforms/chrp/pci.c b/arch/powerpc/platforms/chrp/pci.c index 3690624..28d1647 100644 --- a/arch/powerpc/platforms/chrp/pci.c +++ b/arch/powerpc/platforms/chrp/pci.c @@ -181,7 +181,7 @@ setup_python(struct pci_controller *hose, struct device_node *dev) } iounmap(reg); - setup_indirect_pci(hose, r.start + 0xf8000, r.start + 0xf8010); + setup_indirect_pci(hose, r.start + 0xf8000, r.start + 0xf8010, 0); } /* Marvell Discovery II based Pegasos 2 */ @@ -277,13 +277,14 @@ chrp_find_bridges(void) hose->cfg_data = p; gg2_pci_config_base = p; } else if (is_pegasos == 1) { - setup_indirect_pci(hose, 0xfec00cf8, 0xfee00cfc); + setup_indirect_pci(hose, 0xfec00cf8, 0xfee00cfc, 0); } else if (is_pegasos == 2) { setup_peg2(hose, dev); } else if (!strncmp(model, "IBM,CPC710", 10)) { setup_indirect_pci(hose, r.start + 0x000f8000, - r.start + 0x000f8010); + r.start + 0x000f8010, + 0); if (index == 0) { dma = of_get_property(dev, "system-dma-base", &len); diff --git a/arch/powerpc/platforms/embedded6xx/linkstation.c b/arch/powerpc/platforms/embedded6xx/linkstation.c index f4d0a7a..bd5ca58 100644 --- a/arch/powerpc/platforms/embedded6xx/linkstation.c +++ b/arch/powerpc/platforms/embedded6xx/linkstation.c @@ -73,7 +73,7 @@ static int __init linkstation_add_bridge(struct device_node *dev) return -ENOMEM; hose->first_busno = bus_range ? bus_range[0] : 0; hose->last_busno = bus_range ? bus_range[1] : 0xff; - setup_indirect_pci(hose, 0xfec00000, 0xfee00000); + setup_indirect_pci(hose, 0xfec00000, 0xfee00000, 0); /* Interpret the "ranges" property */ /* This also maps the I/O region and sets isa_io/mem_base */ diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index 484eb4e..08ce31e 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_PPC_PMI) += pmi.o obj-$(CONFIG_U3_DART) += dart_iommu.o obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o obj-$(CONFIG_FSL_SOC) += fsl_soc.o +obj-$(CONFIG_FSL_PCI) += fsl_pci.o obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o obj-$(CONFIG_QUICC_ENGINE) += qe_lib/ mv64x60-$(CONFIG_PCI) += mv64x60_pci.o diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c new file mode 100644 index 0000000..51c2233 --- /dev/null +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -0,0 +1,257 @@ +/* + * MPC85xx/86xx PCI/PCIE support routing. + * + * Copyright 2007 Freescale Semiconductor, Inc + * + * Initial author: Xianghua Xiao <x.xiao@freescale.com> + * Recode: ZHANG WEI <wei.zhang@freescale.com> + * Rewrite the routing for Frescale PCI and PCI Express + * Roy Zang <tie-fei.zang@freescale.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/string.h> +#include <linux/init.h> +#include <linux/bootmem.h> + +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/pci-bridge.h> +#include <asm/machdep.h> +#include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> + +/* atmu setup for fsl pci/pcie controller */ +void __init setup_pci_atmu(struct pci_controller *hose, struct resource *rsrc) +{ + struct ccsr_pci __iomem *pci; + int i; + + pr_debug("PCI memory map start 0x%x, size 0x%x\n", rsrc->start, + rsrc->end - rsrc->start + 1); + pci = ioremap(rsrc->start, rsrc->end - rsrc->start + 1); + + /* Disable all windows (except powar0 since its ignored) */ + for(i = 1; i < 5; i++) + out_be32(&pci->pow[i].powar, 0); + for(i = 0; i < 3; i++) + out_be32(&pci->piw[i].piwar, 0); + + /* Setup outbound MEM window */ + for(i = 0; i < 3; i++) + if (hose->mem_resources[i].flags & IORESOURCE_MEM){ + pr_debug("PCI MEM resource start 0x%08x, size 0x%08x.\n", + hose->mem_resources[i].start, + hose->mem_resources[i].end + - hose->mem_resources[i].start + 1); + out_be32(&pci->pow[i+1].potar, + (hose->mem_resources[i].start >> 12) + & 0x000fffff); + out_be32(&pci->pow[i+1].potear, 0); + out_be32(&pci->pow[i+1].powbar, + (hose->mem_resources[i].start >> 12) + & 0x000fffff); + /* Enable, Mem R/W */ + out_be32(&pci->pow[i+1].powar, 0x80044000 + | (__ilog2(hose->mem_resources[i].end + - hose->mem_resources[i].start + 1) - 1)); + } + + /* Setup outbound IO window */ + if (hose->io_resource.flags & IORESOURCE_IO){ + pr_debug("PCI IO resource start 0x%08x, size 0x%08x, phy base 0x%08x.\n", + hose->io_resource.start, + hose->io_resource.end - hose->io_resource.start + 1, + hose->io_base_phys); + out_be32(&pci->pow[i+1].potar, (hose->io_resource.start >> 12) + & 0x000fffff); + out_be32(&pci->pow[i+1].potear, 0); + out_be32(&pci->pow[i+1].powbar, (hose->io_base_phys >> 12) + & 0x000fffff); + /* Enable, IO R/W */ + out_be32(&pci->pow[i+1].powar, 0x80088000 + | (__ilog2(hose->io_resource.end + - hose->io_resource.start + 1) - 1)); + } + + /* Setup 2G inbound Memory Window @ 1 */ + out_be32(&pci->piw[2].pitar, 0x00000000); + out_be32(&pci->piw[2].piwbar,0x00000000); + out_be32(&pci->piw[2].piwar, PIWAR_2G); +} + +void __init setup_pci_cmd(struct pci_controller *hose) +{ + u16 cmd; + int cap_x; + + early_read_config_word(hose, 0, 0, PCI_COMMAND, &cmd); + cmd |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY + | PCI_COMMAND_IO; + early_write_config_word(hose, 0, 0, PCI_COMMAND, cmd); + + cap_x = early_find_capability(hose, 0, 0, PCI_CAP_ID_PCIX); + if (cap_x) { + int pci_x_cmd = cap_x + PCI_X_CMD; + cmd = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ + | PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E; + early_write_config_word(hose, 0, 0, pci_x_cmd, cmd); + } else { + early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0x80); + } +} + +static void __devinit quirk_fsl_pcie_transparent(struct pci_dev *dev) +{ + struct resource *res; + int i, res_idx = PCI_BRIDGE_RESOURCES; + struct pci_controller *hose; + + /* if we aren't a PCIe don't bother */ + if (!pci_find_capability(dev, PCI_CAP_ID_EXP)) + return ; + + /* + * Make the bridge be transparent. + */ + dev->transparent = 1; + + hose = pci_bus_to_host(dev->bus); + if (!hose) { + printk(KERN_ERR "Can't find hose for bus %d\n", + dev->bus->number); + return; + } + + /* Clear out any of the virtual P2P bridge registers */ + pci_write_config_word(dev, PCI_IO_BASE_UPPER16, 0); + pci_write_config_word(dev, PCI_IO_LIMIT_UPPER16, 0); + pci_write_config_byte(dev, PCI_IO_BASE, 0x10); + pci_write_config_byte(dev, PCI_IO_LIMIT, 0); + pci_write_config_word(dev, PCI_MEMORY_BASE, 0x10); + pci_write_config_word(dev, PCI_MEMORY_LIMIT, 0); + pci_write_config_word(dev, PCI_PREF_BASE_UPPER32, 0x0); + pci_write_config_word(dev, PCI_PREF_LIMIT_UPPER32, 0x0); + pci_write_config_word(dev, PCI_PREF_MEMORY_BASE, 0x10); + pci_write_config_word(dev, PCI_PREF_MEMORY_LIMIT, 0); + + if (hose->io_resource.flags) { + res = &dev->resource[res_idx++]; + res->start = hose->io_resource.start; + res->end = hose->io_resource.end; + res->flags = hose->io_resource.flags; + update_bridge_resource(dev, res); + } + + for (i = 0; i < 3; i++) { + res = &dev->resource[res_idx + i]; + res->start = hose->mem_resources[i].start; + res->end = hose->mem_resources[i].end; + res->flags = hose->mem_resources[i].flags; + update_bridge_resource(dev, res); + } +} + +int __init fsl_pcie_check_link(struct pci_controller *hose) +{ + u16 val; + early_read_config_word(hose, 0, 0, PCIE_LTSSM, &val); + if (val < PCIE_LTSSM_L0) + return 1; + return 0; +} + +void fsl_pcibios_fixup_bus(struct pci_bus *bus) +{ + struct pci_controller *hose = (struct pci_controller *) bus->sysdata; + int i; + + /* deal with bogus pci_bus when we don't have anything connected on PCIe */ + if (hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK) { + if (bus->parent) { + for (i = 0; i < 4; ++i) + bus->resource[i] = bus->parent->resource[i]; + } + } +} + +int __init fsl_add_bridge(struct device_node *dev, int is_primary) +{ + int len; + struct pci_controller *hose; + struct resource rsrc; + const int *bus_range; + + pr_debug("Adding PCI host bridge %s\n", dev->full_name); + + /* Fetch host bridge registers address */ + if (of_address_to_resource(dev, 0, &rsrc)) { + printk(KERN_WARNING "Can't get pci register base!"); + return -ENOMEM; + } + + /* Get bus range if any */ + bus_range = of_get_property(dev, "bus-range", &len); + if (bus_range == NULL || len < 2 * sizeof(int)) + printk(KERN_WARNING "Can't get bus-range for %s, assume" + " bus 0\n", dev->full_name); + + pci_assign_all_buses = 1; + hose = pcibios_alloc_controller(dev); + if (!hose) + return -ENOMEM; + + hose->first_busno = bus_range ? bus_range[0] : 0x0; + hose->last_busno = bus_range ? bus_range[1] : 0xff; + + setup_indirect_pci(hose, rsrc.start, rsrc.start + 0x4, + PPC_INDIRECT_TYPE_BIG_ENDIAN); + setup_pci_cmd(hose); + + /* check PCI express link status */ + if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) { + hose->indirect_type = PPC_INDIRECT_TYPE_EXT_REG | + PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS; + if (fsl_pcie_check_link(hose)) + hose->indirect_type |= PPC_INDIRECT_TYPE_NO_PCIE_LINK; + } + + printk(KERN_INFO "Found FSL PCI host bridge at 0x%016llx." + "Firmware bus number: %d->%d\n", + (unsigned long long)rsrc.start, hose->first_busno, + hose->last_busno); + + pr_debug(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n", + hose, hose->cfg_addr, hose->cfg_data); + + /* Interpret the "ranges" property */ + /* This also maps the I/O region and sets isa_io/mem_base */ + pci_process_bridge_OF_ranges(hose, dev, is_primary); + + /* Setup PEX window registers */ + setup_pci_atmu(hose, &rsrc); + + return 0; +} + +DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8548E, quirk_fsl_pcie_transparent); +DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8548, quirk_fsl_pcie_transparent); +DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8543E, quirk_fsl_pcie_transparent); +DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8543, quirk_fsl_pcie_transparent); +DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8547E, quirk_fsl_pcie_transparent); +DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8545E, quirk_fsl_pcie_transparent); +DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8545, quirk_fsl_pcie_transparent); +DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8568E, quirk_fsl_pcie_transparent); +DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8568, quirk_fsl_pcie_transparent); +DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8567E, quirk_fsl_pcie_transparent); +DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8567, quirk_fsl_pcie_transparent); +DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8544E, quirk_fsl_pcie_transparent); +DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8544, quirk_fsl_pcie_transparent); +DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8641, quirk_fsl_pcie_transparent); +DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8641D, quirk_fsl_pcie_transparent); diff --git a/arch/powerpc/sysdev/fsl_pci.h b/arch/powerpc/sysdev/fsl_pci.h new file mode 100644 index 0000000..37b04ad --- /dev/null +++ b/arch/powerpc/sysdev/fsl_pci.h @@ -0,0 +1,88 @@ +/* + * MPC85xx/86xx PCI Express structure define + * + * Copyright 2007 Freescale Semiconductor, Inc + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifdef __KERNEL__ +#ifndef __POWERPC_FSL_PCI_H +#define __POWERPC_FSL_PCI_H + +#define PCIE_LTSSM 0x0404 /* PCIE Link Training and Status */ +#define PCIE_LTSSM_L0 0x16 /* L0 state */ +#define PIWAR_2G 0xa0f5501e /* Enable, Prefetch, Local Mem, Snoop R/W, 2G */ + +/* PCI/PCI Express outbound window reg */ +struct pci_outbound_window_regs { + __be32 potar; /* 0x.0 - Outbound translation address register */ + __be32 potear; /* 0x.4 - Outbound translation extended address register */ + __be32 powbar; /* 0x.8 - Outbound window base address register */ + u8 res1[4]; + __be32 powar; /* 0x.10 - Outbound window attributes register */ + u8 res2[12]; +}; + +/* PCI/PCI Express inbound window reg */ +struct pci_inbound_window_regs { + __be32 pitar; /* 0x.0 - Inbound translation address register */ + u8 res1[4]; + __be32 piwbar; /* 0x.8 - Inbound window base address register */ + __be32 piwbear; /* 0x.c - Inbound window base extended address register */ + __be32 piwar; /* 0x.10 - Inbound window attributes register */ + u8 res2[12]; +}; + +/* PCI/PCI Express IO block registers for 85xx/86xx */ +struct ccsr_pci { + __be32 config_addr; /* 0x.000 - PCI/PCIE Configuration Address Register */ + __be32 config_data; /* 0x.004 - PCI/PCIE Configuration Data Register */ + __be32 int_ack; /* 0x.008 - PCI Interrupt Acknowledge Register */ + __be32 pex_otb_cpl_tor; /* 0x.00c - PCIE Outbound completion timeout register */ + __be32 pex_conf_tor; /* 0x.010 - PCIE configuration timeout register */ + u8 res2[12]; + __be32 pex_pme_mes_dr; /* 0x.020 - PCIE PME and message detect register */ + __be32 pex_pme_mes_disr; /* 0x.024 - PCIE PME and message disable register */ + __be32 pex_pme_mes_ier; /* 0x.028 - PCIE PME and message interrupt enable register */ + __be32 pex_pmcr; /* 0x.02c - PCIE power management command register */ + u8 res3[3024]; + +/* PCI/PCI Express outbound window 0-4 + * Window 0 is the default window and is the only window enabled upon reset. + * The default outbound register set is used when a transaction misses + * in all of the other outbound windows. + */ + struct pci_outbound_window_regs pow[5]; + + u8 res14[256]; + +/* PCI/PCI Express inbound window 3-1 + * inbound window 1 supports only a 32-bit base address and does not + * define an inbound window base extended address register. + */ + struct pci_inbound_window_regs piw[3]; + + __be32 pex_err_dr; /* 0x.e00 - PCI/PCIE error detect register */ + u8 res21[4]; + __be32 pex_err_en; /* 0x.e08 - PCI/PCIE error interrupt enable register */ + u8 res22[4]; + __be32 pex_err_disr; /* 0x.e10 - PCI/PCIE error disable register */ + u8 res23[12]; + __be32 pex_err_cap_stat; /* 0x.e20 - PCI/PCIE error capture status register */ + u8 res24[4]; + __be32 pex_err_cap_r0; /* 0x.e28 - PCIE error capture register 0 */ + __be32 pex_err_cap_r1; /* 0x.e2c - PCIE error capture register 0 */ + __be32 pex_err_cap_r2; /* 0x.e30 - PCIE error capture register 0 */ + __be32 pex_err_cap_r3; /* 0x.e34 - PCIE error capture register 0 */ +}; + +extern int fsl_add_bridge(struct device_node *dev, int is_primary); +extern void fsl_pcibios_fixup_bus(struct pci_bus *bus); + +#endif /* __POWERPC_FSL_PCI_H */ +#endif /* __KERNEL__ */ diff --git a/arch/powerpc/sysdev/fsl_pcie.h b/arch/powerpc/sysdev/fsl_pcie.h deleted file mode 100644 index 8d9779c..0000000 --- a/arch/powerpc/sysdev/fsl_pcie.h +++ /dev/null @@ -1,94 +0,0 @@ -/* - * MPC85xx/86xx PCI Express structure define - * - * Copyright 2007 Freescale Semiconductor, Inc - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#ifdef __KERNEL__ -#ifndef __POWERPC_FSL_PCIE_H -#define __POWERPC_FSL_PCIE_H - -/* PCIE Express IO block registers in 85xx/86xx */ - -struct ccsr_pex { - __be32 __iomem pex_config_addr; /* 0x.000 - PCI Express Configuration Address Register */ - __be32 __iomem pex_config_data; /* 0x.004 - PCI Express Configuration Data Register */ - u8 __iomem res1[4]; - __be32 __iomem pex_otb_cpl_tor; /* 0x.00c - PCI Express Outbound completion timeout register */ - __be32 __iomem pex_conf_tor; /* 0x.010 - PCI Express configuration timeout register */ - u8 __iomem res2[12]; - __be32 __iomem pex_pme_mes_dr; /* 0x.020 - PCI Express PME and message detect register */ - __be32 __iomem pex_pme_mes_disr; /* 0x.024 - PCI Express PME and message disable register */ - __be32 __iomem pex_pme_mes_ier; /* 0x.028 - PCI Express PME and message interrupt enable register */ - __be32 __iomem pex_pmcr; /* 0x.02c - PCI Express power management command register */ - u8 __iomem res3[3024]; - __be32 __iomem pexotar0; /* 0x.c00 - PCI Express outbound translation address register 0 */ - __be32 __iomem pexotear0; /* 0x.c04 - PCI Express outbound translation extended address register 0*/ - u8 __iomem res4[8]; - __be32 __iomem pexowar0; /* 0x.c10 - PCI Express outbound window attributes register 0*/ - u8 __iomem res5[12]; - __be32 __iomem pexotar1; /* 0x.c20 - PCI Express outbound translation address register 1 */ - __be32 __iomem pexotear1; /* 0x.c24 - PCI Express outbound translation extended address register 1*/ - __be32 __iomem pexowbar1; /* 0x.c28 - PCI Express outbound window base address register 1*/ - u8 __iomem res6[4]; - __be32 __iomem pexowar1; /* 0x.c30 - PCI Express outbound window attributes register 1*/ - u8 __iomem res7[12]; - __be32 __iomem pexotar2; /* 0x.c40 - PCI Express outbound translation address register 2 */ - __be32 __iomem pexotear2; /* 0x.c44 - PCI Express outbound translation extended address register 2*/ - __be32 __iomem pexowbar2; /* 0x.c48 - PCI Express outbound window base address register 2*/ - u8 __iomem res8[4]; - __be32 __iomem pexowar2; /* 0x.c50 - PCI Express outbound window attributes register 2*/ - u8 __iomem res9[12]; - __be32 __iomem pexotar3; /* 0x.c60 - PCI Express outbound translation address register 3 */ - __be32 __iomem pexotear3; /* 0x.c64 - PCI Express outbound translation extended address register 3*/ - __be32 __iomem pexowbar3; /* 0x.c68 - PCI Express outbound window base address register 3*/ - u8 __iomem res10[4]; - __be32 __iomem pexowar3; /* 0x.c70 - PCI Express outbound window attributes register 3*/ - u8 __iomem res11[12]; - __be32 __iomem pexotar4; /* 0x.c80 - PCI Express outbound translation address register 4 */ - __be32 __iomem pexotear4; /* 0x.c84 - PCI Express outbound translation extended address register 4*/ - __be32 __iomem pexowbar4; /* 0x.c88 - PCI Express outbound window base address register 4*/ - u8 __iomem res12[4]; - __be32 __iomem pexowar4; /* 0x.c90 - PCI Express outbound window attributes register 4*/ - u8 __iomem res13[12]; - u8 __iomem res14[256]; - __be32 __iomem pexitar3; /* 0x.da0 - PCI Express inbound translation address register 3 */ - u8 __iomem res15[4]; - __be32 __iomem pexiwbar3; /* 0x.da8 - PCI Express inbound window base address register 3 */ - __be32 __iomem pexiwbear3; /* 0x.dac - PCI Express inbound window base extended address register 3 */ - __be32 __iomem pexiwar3; /* 0x.db0 - PCI Express inbound window attributes register 3 */ - u8 __iomem res16[12]; - __be32 __iomem pexitar2; /* 0x.dc0 - PCI Express inbound translation address register 2 */ - u8 __iomem res17[4]; - __be32 __iomem pexiwbar2; /* 0x.dc8 - PCI Express inbound window base address register 2 */ - __be32 __iomem pexiwbear2; /* 0x.dcc - PCI Express inbound window base extended address register 2 */ - __be32 __iomem pexiwar2; /* 0x.dd0 - PCI Express inbound window attributes register 2 */ - u8 __iomem res18[12]; - __be32 __iomem pexitar1; /* 0x.de0 - PCI Express inbound translation address register 2 */ - u8 __iomem res19[4]; - __be32 __iomem pexiwbar1; /* 0x.de8 - PCI Express inbound window base address register 2 */ - __be32 __iomem pexiwbear1; /* 0x.dec - PCI Express inbound window base extended address register 2 */ - __be32 __iomem pexiwar1; /* 0x.df0 - PCI Express inbound window attributes register 2 */ - u8 __iomem res20[12]; - __be32 __iomem pex_err_dr; /* 0x.e00 - PCI Express error detect register */ - u8 __iomem res21[4]; - __be32 __iomem pex_err_en; /* 0x.e08 - PCI Express error interrupt enable register */ - u8 __iomem res22[4]; - __be32 __iomem pex_err_disr; /* 0x.e10 - PCI Express error disable register */ - u8 __iomem res23[12]; - __be32 __iomem pex_err_cap_stat; /* 0x.e20 - PCI Express error capture status register */ - u8 __iomem res24[4]; - __be32 __iomem pex_err_cap_r0; /* 0x.e28 - PCI Express error capture register 0 */ - __be32 __iomem pex_err_cap_r1; /* 0x.e2c - PCI Express error capture register 0 */ - __be32 __iomem pex_err_cap_r2; /* 0x.e30 - PCI Express error capture register 0 */ - __be32 __iomem pex_err_cap_r3; /* 0x.e34 - PCI Express error capture register 0 */ -}; - -#endif /* __POWERPC_FSL_PCIE_H */ -#endif /* __KERNEL__ */ diff --git a/arch/powerpc/sysdev/grackle.c b/arch/powerpc/sysdev/grackle.c index 4205362..11ad562 100644 --- a/arch/powerpc/sysdev/grackle.c +++ b/arch/powerpc/sysdev/grackle.c @@ -55,7 +55,7 @@ static inline void grackle_set_loop_snoop(struct pci_controller *bp, int enable) void __init setup_grackle(struct pci_controller *hose) { - setup_indirect_pci(hose, 0xfec00000, 0xfee00000); + setup_indirect_pci(hose, 0xfec00000, 0xfee00000, 0); if (machine_is_compatible("PowerMac1,1")) pci_assign_all_buses = 1; if (machine_is_compatible("AAPL,PowerBook1998")) diff --git a/arch/powerpc/sysdev/indirect_pci.c b/arch/powerpc/sysdev/indirect_pci.c index c7e6e85..a8ac2df 100644 --- a/arch/powerpc/sysdev/indirect_pci.c +++ b/arch/powerpc/sysdev/indirect_pci.c @@ -20,12 +20,6 @@ #include <asm/pci-bridge.h> #include <asm/machdep.h> -#ifdef CONFIG_PPC_INDIRECT_PCI_BE -#define PCI_CFG_OUT out_be32 -#else -#define PCI_CFG_OUT out_le32 -#endif - static int indirect_read_config(struct pci_bus *bus, unsigned int devfn, int offset, int len, u32 *val) @@ -35,10 +29,17 @@ indirect_read_config(struct pci_bus *bus, unsigned int devfn, int offset, u8 cfg_type = 0; u32 bus_no, reg; + if (hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK) { + if (bus->number != hose->first_busno) + return PCIBIOS_DEVICE_NOT_FOUND; + if (devfn != 0) + return PCIBIOS_DEVICE_NOT_FOUND; + } + if (ppc_md.pci_exclude_device) if (ppc_md.pci_exclude_device(hose, bus->number, devfn)) return PCIBIOS_DEVICE_NOT_FOUND; - + if (hose->indirect_type & PPC_INDIRECT_TYPE_SET_CFG_TYPE) if (bus->number != hose->first_busno) cfg_type = 1; @@ -51,9 +52,12 @@ indirect_read_config(struct pci_bus *bus, unsigned int devfn, int offset, else reg = offset & 0xfc; - PCI_CFG_OUT(hose->cfg_addr, - (0x80000000 | (bus_no << 16) - | (devfn << 8) | reg | cfg_type)); + if (hose->indirect_type & PPC_INDIRECT_TYPE_BIG_ENDIAN) + out_be32(hose->cfg_addr, (0x80000000 | (bus_no << 16) | + (devfn << 8) | reg | cfg_type)); + else + out_le32(hose->cfg_addr, (0x80000000 | (bus_no << 16) | + (devfn << 8) | reg | cfg_type)); /* * Note: the caller has already checked that offset is @@ -83,6 +87,13 @@ indirect_write_config(struct pci_bus *bus, unsigned int devfn, int offset, u8 cfg_type = 0; u32 bus_no, reg; + if (hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK) { + if (bus->number != hose->first_busno) + return PCIBIOS_DEVICE_NOT_FOUND; + if (devfn != 0) + return PCIBIOS_DEVICE_NOT_FOUND; + } + if (ppc_md.pci_exclude_device) if (ppc_md.pci_exclude_device(hose, bus->number, devfn)) return PCIBIOS_DEVICE_NOT_FOUND; @@ -99,9 +110,12 @@ indirect_write_config(struct pci_bus *bus, unsigned int devfn, int offset, else reg = offset & 0xfc; - PCI_CFG_OUT(hose->cfg_addr, - (0x80000000 | (bus_no << 16) - | (devfn << 8) | reg | cfg_type)); + if (hose->indirect_type & PPC_INDIRECT_TYPE_BIG_ENDIAN) + out_be32(hose->cfg_addr, (0x80000000 | (bus_no << 16) | + (devfn << 8) | reg | cfg_type)); + else + out_le32(hose->cfg_addr, (0x80000000 | (bus_no << 16) | + (devfn << 8) | reg | cfg_type)); /* surpress setting of PCI_PRIMARY_BUS */ if (hose->indirect_type & PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS) @@ -135,24 +149,15 @@ static struct pci_ops indirect_pci_ops = }; void __init -setup_indirect_pci_nomap(struct pci_controller* hose, void __iomem * cfg_addr, - void __iomem * cfg_data) -{ - hose->cfg_addr = cfg_addr; - hose->cfg_data = cfg_data; - hose->ops = &indirect_pci_ops; -} - -void __init -setup_indirect_pci(struct pci_controller* hose, u32 cfg_addr, u32 cfg_data) +setup_indirect_pci(struct pci_controller* hose, u32 cfg_addr, u32 cfg_data, u32 flags) { unsigned long base = cfg_addr & PAGE_MASK; - void __iomem *mbase, *addr, *data; + void __iomem *mbase; mbase = ioremap(base, PAGE_SIZE); - addr = mbase + (cfg_addr & ~PAGE_MASK); + hose->cfg_addr = mbase + (cfg_addr & ~PAGE_MASK); if ((cfg_data & PAGE_MASK) != base) mbase = ioremap(cfg_data & PAGE_MASK, PAGE_SIZE); - data = mbase + (cfg_data & ~PAGE_MASK); - setup_indirect_pci_nomap(hose, addr, data); + hose->cfg_data = mbase + (cfg_data & ~PAGE_MASK); + hose->ops = &indirect_pci_ops; } diff --git a/arch/powerpc/sysdev/mv64x60_pci.c b/arch/powerpc/sysdev/mv64x60_pci.c index 45db86c..9b3baa7 100644 --- a/arch/powerpc/sysdev/mv64x60_pci.c +++ b/arch/powerpc/sysdev/mv64x60_pci.c @@ -144,7 +144,7 @@ static int __init mv64x60_add_bridge(struct device_node *dev) hose->first_busno = bus_range ? bus_range[0] : 0; hose->last_busno = bus_range ? bus_range[1] : 0xff; - setup_indirect_pci(hose, rsrc.start, rsrc.start + 4); + setup_indirect_pci(hose, rsrc.start, rsrc.start + 4, 0); hose->self_busno = hose->first_busno; printk(KERN_INFO "Found MV64x60 PCI host bridge at 0x%016llx. " |
