summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
authorBenjamin Herrenschmidt <benh@kernel.crashing.org>2006-07-10 16:44:54 +1000
committerPaul Mackerras <paulus@samba.org>2006-07-28 10:51:43 +1000
commite272a2853459b1e7282a7d0b54114ffaa7b3980f (patch)
tree9579598050944e748366bab51141aac0bbcfc640 /arch
parent8279d2e6062673f31c59ad9e2104024123154267 (diff)
downloadop-kernel-dev-e272a2853459b1e7282a7d0b54114ffaa7b3980f.zip
op-kernel-dev-e272a2853459b1e7282a7d0b54114ffaa7b3980f.tar.gz
[POWERPC] Add cpufreq support for Xserve G5
The Xserve G5 are capable of frequency switching like other desktop G5s. This enables it. It also fix a Kconfig issue which prevented from building the G5 cpufreq support if CONFIG_PMAC_SMU was not set (the first version of that driver only worked with SMU based macs, but this isn't the case anymore). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
Diffstat (limited to 'arch')
-rw-r--r--arch/powerpc/Kconfig2
-rw-r--r--arch/powerpc/platforms/powermac/cpufreq_64.c78
2 files changed, 50 insertions, 30 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 2643dbc..13e583f 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -504,7 +504,7 @@ config CPU_FREQ_PMAC
config CPU_FREQ_PMAC64
bool "Support for some Apple G5s"
- depends on CPU_FREQ && PMAC_SMU && PPC64
+ depends on CPU_FREQ && PPC64
select CPU_FREQ_TABLE
help
This adds support for frequency switching on Apple iMac G5,
diff --git a/arch/powerpc/platforms/powermac/cpufreq_64.c b/arch/powerpc/platforms/powermac/cpufreq_64.c
index f08a145..7b1156e 100644
--- a/arch/powerpc/platforms/powermac/cpufreq_64.c
+++ b/arch/powerpc/platforms/powermac/cpufreq_64.c
@@ -10,6 +10,8 @@
* that is iMac G5 and latest single CPU desktop.
*/
+#undef DEBUG
+
#include <linux/module.h>
#include <linux/types.h>
#include <linux/errno.h>
@@ -30,13 +32,7 @@
#include <asm/smu.h>
#include <asm/pmac_pfunc.h>
-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(fmt...) printk(fmt)
-#else
-#define DBG(fmt...)
-#endif
+#define DBG(fmt...) pr_debug(fmt)
/* see 970FX user manual */
@@ -82,8 +78,6 @@ static struct freq_attr* g5_cpu_freqs_attr[] = {
/* Power mode data is an array of the 32 bits PCR values to use for
* the various frequencies, retrieved from the device-tree
*/
-static u32 *g5_pmode_data;
-static int g5_pmode_max;
static int g5_pmode_cur;
static void (*g5_switch_volt)(int speed_mode);
@@ -93,6 +87,11 @@ static int (*g5_query_freq)(void);
static DEFINE_MUTEX(g5_switch_mutex);
+#ifdef CONFIG_PMAC_SMU
+
+static u32 *g5_pmode_data;
+static int g5_pmode_max;
+
static struct smu_sdbp_fvt *g5_fvt_table; /* table of op. points */
static int g5_fvt_count; /* number of op. points */
static int g5_fvt_cur; /* current op. point */
@@ -210,6 +209,16 @@ static int g5_scom_query_freq(void)
}
/*
+ * Fake voltage switching for platforms with missing support
+ */
+
+static void g5_dummy_switch_volt(int speed_mode)
+{
+}
+
+#endif /* CONFIG_PMAC_SMU */
+
+/*
* Platform function based voltage switching for PowerMac7,2 & 7,3
*/
@@ -248,6 +257,9 @@ static int g5_pfunc_switch_freq(int speed_mode)
struct pmf_args args;
u32 done = 0;
unsigned long timeout;
+ int rc;
+
+ DBG("g5_pfunc_switch_freq(%d)\n", speed_mode);
/* If frequency is going up, first ramp up the voltage */
if (speed_mode < g5_pmode_cur)
@@ -255,9 +267,12 @@ static int g5_pfunc_switch_freq(int speed_mode)
/* Do it */
if (speed_mode == CPUFREQ_HIGH)
- pmf_call_one(pfunc_cpu_setfreq_high, NULL);
+ rc = pmf_call_one(pfunc_cpu_setfreq_high, NULL);
else
- pmf_call_one(pfunc_cpu_setfreq_low, NULL);
+ rc = pmf_call_one(pfunc_cpu_setfreq_low, NULL);
+
+ if (rc)
+ printk(KERN_WARNING "cpufreq: pfunc switch error %d\n", rc);
/* It's an irq GPIO so we should be able to just block here,
* I'll do that later after I've properly tested the IRQ code for
@@ -296,13 +311,6 @@ static int g5_pfunc_query_freq(void)
return val ? CPUFREQ_HIGH : CPUFREQ_LOW;
}
-/*
- * Fake voltage switching for platforms with missing support
- */
-
-static void g5_dummy_switch_volt(int speed_mode)
-{
-}
/*
* Common interface to the cpufreq core
@@ -375,6 +383,8 @@ static struct cpufreq_driver g5_cpufreq_driver = {
};
+#ifdef CONFIG_PMAC_SMU
+
static int __init g5_neo2_cpufreq_init(struct device_node *cpus)
{
struct device_node *cpunode;
@@ -525,6 +535,9 @@ static int __init g5_neo2_cpufreq_init(struct device_node *cpus)
return rc;
}
+#endif /* CONFIG_PMAC_SMU */
+
+
static int __init g5_pm72_cpufreq_init(struct device_node *cpus)
{
struct device_node *cpuid = NULL, *hwclock = NULL, *cpunode = NULL;
@@ -533,6 +546,9 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpus)
u64 max_freq, min_freq, ih, il;
int has_volt = 1, rc = 0;
+ DBG("cpufreq: Initializing for PowerMac7,2, PowerMac7,3 and"
+ " RackMac3,1...\n");
+
/* Get first CPU node */
for (cpunode = NULL;
(cpunode = of_get_next_child(cpus, cpunode)) != NULL;) {
@@ -636,6 +652,15 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpus)
*/
ih = *((u32 *)(eeprom + 0x10));
il = *((u32 *)(eeprom + 0x20));
+
+ /* Check for machines with no useful settings */
+ if (il == ih) {
+ printk(KERN_WARNING "cpufreq: No low frequency mode available"
+ " on this model !\n");
+ rc = -ENODEV;
+ goto bail;
+ }
+
min_freq = 0;
if (ih != 0 && il != 0)
min_freq = (max_freq * il) / ih;
@@ -643,7 +668,7 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpus)
/* Sanity check */
if (min_freq >= max_freq || min_freq < 1000) {
printk(KERN_ERR "cpufreq: Can't calculate low frequency !\n");
- rc = -ENODEV;
+ rc = -ENXIO;
goto bail;
}
g5_cpu_freqs[0].frequency = max_freq;
@@ -690,16 +715,10 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpus)
return rc;
}
-static int __init g5_rm31_cpufreq_init(struct device_node *cpus)
-{
- /* NYI */
- return 0;
-}
-
static int __init g5_cpufreq_init(void)
{
struct device_node *cpus;
- int rc;
+ int rc = 0;
cpus = of_find_node_by_path("/cpus");
if (cpus == NULL) {
@@ -708,12 +727,13 @@ static int __init g5_cpufreq_init(void)
}
if (machine_is_compatible("PowerMac7,2") ||
- machine_is_compatible("PowerMac7,3"))
+ machine_is_compatible("PowerMac7,3") ||
+ machine_is_compatible("RackMac3,1"))
rc = g5_pm72_cpufreq_init(cpus);
- else if (machine_is_compatible("RackMac3,1"))
- rc = g5_rm31_cpufreq_init(cpus);
+#ifdef CONFIG_PMAC_SMU
else
rc = g5_neo2_cpufreq_init(cpus);
+#endif /* CONFIG_PMAC_SMU */
of_node_put(cpus);
return rc;
OpenPOWER on IntegriCloud