summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
authorRusty Russell <rusty@rustcorp.com.au>2008-03-11 09:35:56 -0500
committerRusty Russell <rusty@rustcorp.com.au>2008-03-11 09:35:57 +1100
commit3fabc55f34b72720e8a10aa442bd3415a211edb3 (patch)
tree2ccc469ce6daff4430c04d89b139f3d7ac02aaac /arch
parentf14ae652baa3d72ae378f0c06b89cc2c4ef15ff8 (diff)
downloadop-kernel-dev-3fabc55f34b72720e8a10aa442bd3415a211edb3.zip
op-kernel-dev-3fabc55f34b72720e8a10aa442bd3415a211edb3.tar.gz
lguest: Sanitize the lguest clock.
Now the TSC code handles a zero return from calculate_cpu_khz(), lguest can simply pass through the value it gets from the Host: if non-zero, all the normal TSC code applies. Otherwise (or if the Host really doesn't support TSC), the clocksource code will fall back to the slower but reasonable lguest clock. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Diffstat (limited to 'arch')
-rw-r--r--arch/x86/lguest/boot.c53
1 files changed, 21 insertions, 32 deletions
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index cccb38a..9c27c10 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -84,7 +84,6 @@ struct lguest_data lguest_data = {
.blocked_interrupts = { 1 }, /* Block timer interrupts */
.syscall_vec = SYSCALL_VECTOR,
};
-static cycle_t clock_base;
/*G:037 async_hcall() is pretty simple: I'm quite proud of it really. We have a
* ring buffer of stored hypercalls which the Host will run though next time we
@@ -327,8 +326,8 @@ static void lguest_cpuid(unsigned int *ax, unsigned int *bx,
case 1: /* Basic feature request. */
/* We only allow kernel to see SSE3, CMPXCHG16B and SSSE3 */
*cx &= 0x00002201;
- /* SSE, SSE2, FXSR, MMX, CMOV, CMPXCHG8B, FPU. */
- *dx &= 0x07808101;
+ /* SSE, SSE2, FXSR, MMX, CMOV, CMPXCHG8B, TSC, FPU. */
+ *dx &= 0x07808111;
/* The Host can do a nice optimization if it knows that the
* kernel mappings (addresses above 0xC0000000 or whatever
* PAGE_OFFSET is set to) haven't changed. But Linux calls
@@ -595,19 +594,25 @@ static unsigned long lguest_get_wallclock(void)
return lguest_data.time.tv_sec;
}
+/* The TSC is a Time Stamp Counter. The Host tells us what speed it runs at,
+ * or 0 if it's unusable as a reliable clock source. This matches what we want
+ * here: if we return 0 from this function, the x86 TSC clock will not register
+ * itself. */
+static unsigned long lguest_cpu_khz(void)
+{
+ return lguest_data.tsc_khz;
+}
+
+/* If we can't use the TSC, the kernel falls back to our "lguest_clock", where
+ * we read the time value given to us by the Host. */
static cycle_t lguest_clock_read(void)
{
unsigned long sec, nsec;
- /* If the Host tells the TSC speed, we can trust that. */
- if (lguest_data.tsc_khz)
- return native_read_tsc();
-
- /* If we can't use the TSC, we read the time value written by the Host.
- * Since it's in two parts (seconds and nanoseconds), we risk reading
- * it just as it's changing from 99 & 0.999999999 to 100 and 0, and
- * getting 99 and 0. As Linux tends to come apart under the stress of
- * time travel, we must be careful: */
+ /* Since the time is in two parts (seconds and nanoseconds), we risk
+ * reading it just as it's changing from 99 & 0.999999999 to 100 and 0,
+ * and getting 99 and 0. As Linux tends to come apart under the stress
+ * of time travel, we must be careful: */
do {
/* First we read the seconds part. */
sec = lguest_data.time.tv_sec;
@@ -622,14 +627,14 @@ static cycle_t lguest_clock_read(void)
/* Now if the seconds part has changed, try again. */
} while (unlikely(lguest_data.time.tv_sec != sec));
- /* Our non-TSC clock is in real nanoseconds. */
+ /* Our lguest clock is in real nanoseconds. */
return sec*1000000000ULL + nsec;
}
-/* This is what we tell the kernel is our clocksource. */
+/* This is the fallback clocksource: lower priority than the TSC clocksource. */
static struct clocksource lguest_clock = {
.name = "lguest",
- .rating = 400,
+ .rating = 200,
.read = lguest_clock_read,
.mask = CLOCKSOURCE_MASK(64),
.mult = 1 << 22,
@@ -637,12 +642,6 @@ static struct clocksource lguest_clock = {
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
-/* The "scheduler clock" is just our real clock, adjusted to start at zero */
-static unsigned long long lguest_sched_clock(void)
-{
- return cyc2ns(&lguest_clock, lguest_clock_read() - clock_base);
-}
-
/* We also need a "struct clock_event_device": Linux asks us to set it to go
* off some time in the future. Actually, James Morris figured all this out, I
* just applied the patch. */
@@ -712,19 +711,8 @@ static void lguest_time_init(void)
/* Set up the timer interrupt (0) to go to our simple timer routine */
set_irq_handler(0, lguest_time_irq);
- /* Our clock structure looks like arch/x86/kernel/tsc_32.c if we can
- * use the TSC, otherwise it's a dumb nanosecond-resolution clock.
- * Either way, the "rating" is set so high that it's always chosen over
- * any other clocksource. */
- if (lguest_data.tsc_khz)
- lguest_clock.mult = clocksource_khz2mult(lguest_data.tsc_khz,
- lguest_clock.shift);
- clock_base = lguest_clock_read();
clocksource_register(&lguest_clock);
- /* Now we've set up our clock, we can use it as the scheduler clock */
- pv_time_ops.sched_clock = lguest_sched_clock;
-
/* We can't set cpumask in the initializer: damn C limitations! Set it
* here and register our timer device. */
lguest_clockevent.cpumask = cpumask_of_cpu(0);
@@ -995,6 +983,7 @@ __init void lguest_init(void)
/* time operations */
pv_time_ops.get_wallclock = lguest_get_wallclock;
pv_time_ops.time_init = lguest_time_init;
+ pv_time_ops.get_cpu_khz = lguest_cpu_khz;
/* Now is a good time to look at the implementations of these functions
* before returning to the rest of lguest_init(). */
OpenPOWER on IntegriCloud