summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
authorFrank Rowand <frowand@mvista.com>2005-06-28 16:48:04 -0700
committerPaul Mackerras <paulus@samba.org>2005-08-29 10:53:32 +1000
commit6020164499ff3a61cd8bebceb9e294a155079f71 (patch)
tree48e3407b76918314af13b7f38f4a3d2813f11fe8 /arch
parent293da76b3d4c2f362f906bce8c5d2e053bdf8d44 (diff)
downloadop-kernel-dev-6020164499ff3a61cd8bebceb9e294a155079f71.zip
op-kernel-dev-6020164499ff3a61cd8bebceb9e294a155079f71.tar.gz
[PATCH] ppc64: change duplicate Kconfig menu "General setup" to "Bus Options"
arch/ppc64/Kconfig defines a "General setup" menu, but also sources init/Kconfig which also defines a "General setup" menu. Both of these menus appear at the top level of make menuconfig. Having two menus with the same name is confusing. This patch renames the ppc64/Kconfig menu to be "Bus Options" and moves options in this menu which are not bus related to the end of the "Platform support" menu. There are many variations among architectures on the exact naming of the "Bus Options" menu. I chose to use the simplest one, which is also used in arch/ppc/Kconfig. Signed-off-by: Frank Rowand <frowand@mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
Diffstat (limited to 'arch')
-rw-r--r--arch/ppc64/Kconfig68
1 files changed, 34 insertions, 34 deletions
diff --git a/arch/ppc64/Kconfig b/arch/ppc64/Kconfig
index 2ce8783..4d4f81c 100644
--- a/arch/ppc64/Kconfig
+++ b/arch/ppc64/Kconfig
@@ -350,13 +350,46 @@ config SECCOMP
If unsure, say Y. Only embedded should say N here.
+source "fs/Kconfig.binfmt"
+
+config HOTPLUG_CPU
+ bool "Support for hot-pluggable CPUs"
+ depends on SMP && EXPERIMENTAL && (PPC_PSERIES || PPC_PMAC)
+ select HOTPLUG
+ ---help---
+ Say Y here to be able to turn CPUs off and on.
+
+ Say N if you are unsure.
+
+config PROC_DEVICETREE
+ bool "Support for Open Firmware device tree in /proc"
+ depends on !PPC_ISERIES
+ help
+ This option adds a device-tree directory under /proc which contains
+ an image of the device tree that the kernel copies from Open
+ Firmware. If unsure, say Y here.
+
+config CMDLINE_BOOL
+ bool "Default bootloader kernel arguments"
+ depends on !PPC_ISERIES
+
+config CMDLINE
+ string "Initial kernel command string"
+ depends on CMDLINE_BOOL
+ default "console=ttyS0,9600 console=tty0 root=/dev/sda2"
+ help
+ On some platforms, there is currently no way for the boot loader to
+ pass arguments to the kernel. For these platforms, you can supply
+ some command-line options at build time by entering them here. In
+ most cases you will need to specify the root device here.
+
endmenu
config ISA_DMA_API
bool
default y
-menu "General setup"
+menu "Bus Options"
config ISA
bool
@@ -389,45 +422,12 @@ config PCI_DOMAINS
bool
default PCI
-source "fs/Kconfig.binfmt"
-
source "drivers/pci/Kconfig"
-config HOTPLUG_CPU
- bool "Support for hot-pluggable CPUs"
- depends on SMP && EXPERIMENTAL && (PPC_PSERIES || PPC_PMAC)
- select HOTPLUG
- ---help---
- Say Y here to be able to turn CPUs off and on.
-
- Say N if you are unsure.
-
source "drivers/pcmcia/Kconfig"
source "drivers/pci/hotplug/Kconfig"
-config PROC_DEVICETREE
- bool "Support for Open Firmware device tree in /proc"
- depends on !PPC_ISERIES
- help
- This option adds a device-tree directory under /proc which contains
- an image of the device tree that the kernel copies from Open
- Firmware. If unsure, say Y here.
-
-config CMDLINE_BOOL
- bool "Default bootloader kernel arguments"
- depends on !PPC_ISERIES
-
-config CMDLINE
- string "Initial kernel command string"
- depends on CMDLINE_BOOL
- default "console=ttyS0,9600 console=tty0 root=/dev/sda2"
- help
- On some platforms, there is currently no way for the boot loader to
- pass arguments to the kernel. For these platforms, you can supply
- some command-line options at build time by entering them here. In
- most cases you will need to specify the root device here.
-
endmenu
source "net/Kconfig"
OpenPOWER on IntegriCloud