Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

 1) Support offloading wireless authentication to userspace via
    NL80211_CMD_EXTERNAL_AUTH, from Srinivas Dasari.

 2) A lot of work on network namespace setup/teardown from Kirill Tkhai.
    Setup and cleanup of namespaces now all run asynchronously and thus
    performance is significantly increased.

 3) Add rx/tx timestamping support to mv88e6xxx driver, from Brandon
    Streiff.

 4) Support zerocopy on RDS sockets, from Sowmini Varadhan.

 5) Use denser instruction encoding in x86 eBPF JIT, from Daniel
    Borkmann.

 6) Support hw offload of vlan filtering in mvpp2 dreiver, from Maxime
    Chevallier.

 7) Support grafting of child qdiscs in mlxsw driver, from Nogah
    Frankel.

 8) Add packet forwarding tests to selftests, from Ido Schimmel.

 9) Deal with sub-optimal GSO packets better in BBR congestion control,
    from Eric Dumazet.

10) Support 5-tuple hashing in ipv6 multipath routing, from David Ahern.

11) Add path MTU tests to selftests, from Stefano Brivio.

12) Various bits of IPSEC offloading support for mlx5, from Aviad
    Yehezkel, Yossi Kuperman, and Saeed Mahameed.

13) Support RSS spreading on ntuple filters in SFC driver, from Edward
    Cree.

14) Lots of sockmap work from John Fastabend. Applications can use eBPF
    to filter sendmsg and sendpage operations.

15) In-kernel receive TLS support, from Dave Watson.

16) Add XDP support to ixgbevf, this is significant because it should
    allow optimized XDP usage in various cloud environments. From Tony
    Nguyen.

17) Add new Intel E800 series "ice" ethernet driver, from Anirudh
    Venkataramanan et al.

18) IP fragmentation match offload support in nfp driver, from Pieter
    Jansen van Vuuren.

19) Support XDP redirect in i40e driver, from Björn Töpel.

20) Add BPF_RAW_TRACEPOINT program type for accessing the arguments of
    tracepoints in their raw form, from Alexei Starovoitov.

21) Lots of striding RQ improvements to mlx5 driver with many
    performance improvements, from Tariq Toukan.

22) Use rhashtable for inet frag reassembly, from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1678 commits)
  net: mvneta: improve suspend/resume
  net: mvneta: split rxq/txq init and txq deinit into SW and HW parts
  ipv6: frags: fix /proc/sys/net/ipv6/ip6frag_low_thresh
  net: bgmac: Fix endian access in bgmac_dma_tx_ring_free()
  net: bgmac: Correctly annotate register space
  route: check sysctl_fib_multipath_use_neigh earlier than hash
  fix typo in command value in drivers/net/phy/mdio-bitbang.
  sky2: Increase D3 delay to sky2 stops working after suspend
  net/mlx5e: Set EQE based as default TX interrupt moderation mode
  ibmvnic: Disable irqs before exiting reset from closed state
  net: sched: do not emit messages while holding spinlock
  vlan: also check phy_driver ts_info for vlan's real device
  Bluetooth: Mark expected switch fall-throughs
  Bluetooth: Set HCI_QUIRK_SIMULTANEOUS_DISCOVERY for BTUSB_QCA_ROME
  Bluetooth: btrsi: remove unused including <linux/version.h>
  Bluetooth: hci_bcm: Remove DMI quirk for the MINIX Z83-4
  sh_eth: kill useless check in __sh_eth_get_regs()
  sh_eth: add sh_eth_cpu_data::no_xdfar flag
  ipv6: factorize sk_wmem_alloc updates done by __ip6_append_data()
  ipv4: factorize sk_wmem_alloc updates done by __ip_append_data()
  ...

3 files changed, 170 insertions, 100 deletions

diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts
index 8b2fa9a..c28afb2 100644
--- a/arch/arm/boot/dts/armada-370-rd.dts
+++ b/arch/arm/boot/dts/armada-370-rd.dts
@@ -56,6 +56,7 @@
 
 /dts-v1/;
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include "armada-370.dtsi"
 
@@ -243,6 +244,8 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x10>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		ports {
 			#address-cells = <1>;
@@ -278,6 +281,35 @@
 				};
 			};
 		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switchphy0: switchphy@0 {
+				reg = <0>;
+				interrupt-parent = <&switch>;
+				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			switchphy1: switchphy@1 {
+				reg = <1>;
+				interrupt-parent = <&switch>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			switchphy2: switchphy@2 {
+				reg = <2>;
+				interrupt-parent = <&switch>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			switchphy3: switchphy@3 {
+				reg = <3>;
+				interrupt-parent = <&switch>;
+				interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
 	};
 };
 
diff --git a/arch/m68k/mac/config.c b/arch/m68k/mac/config.c
index 36086cc..0c3275a 100644
--- a/arch/m68k/mac/config.c
+++ b/arch/m68k/mac/config.c
@@ -1090,6 +1090,10 @@ int __init mac_platform_init(void)
 	    macintosh_config->expansion_type == MAC_EXP_PDS_COMM)
 		platform_device_register_simple("macsonic", -1, NULL, 0);
 
+	if (macintosh_config->expansion_type == MAC_EXP_PDS ||
+	    macintosh_config->expansion_type == MAC_EXP_PDS_COMM)
+		platform_device_register_simple("mac89x0", -1, NULL, 0);
+
 	if (macintosh_config->ether_type == MAC_ETHER_MACE)
 		platform_device_register_simple("macmace", -1, NULL, 0);
 
diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c
index ce5b2eb..b7251541 100644
--- a/arch/x86/net/bpf_jit_comp.c
+++ b/arch/x86/net/bpf_jit_comp.c
@@ -11,10 +11,10 @@
 #include <linux/netdevice.h>
 #include <linux/filter.h>
 #include <linux/if_vlan.h>
-#include <asm/cacheflush.h>
+#include <linux/bpf.h>
+
 #include <asm/set_memory.h>
 #include <asm/nospec-branch.h>
-#include <linux/bpf.h>
 
 /*
  * assembly code in arch/x86/net/bpf_jit.S
@@ -61,7 +61,12 @@ static bool is_imm8(int value)
 
 static bool is_simm32(s64 value)
 {
-	return value == (s64) (s32) value;
+	return value == (s64)(s32)value;
+}
+
+static bool is_uimm32(u64 value)
+{
+	return value == (u64)(u32)value;
 }
 
 /* mov dst, src */
@@ -98,16 +103,6 @@ static int bpf_size_to_x86_bytes(int bpf_size)
 #define X86_JLE 0x7E
 #define X86_JG  0x7F
 
-static void bpf_flush_icache(void *start, void *end)
-{
-	mm_segment_t old_fs = get_fs();
-
-	set_fs(KERNEL_DS);
-	smp_wmb();
-	flush_icache_range((unsigned long)start, (unsigned long)end);
-	set_fs(old_fs);
-}
-
 #define CHOOSE_LOAD_FUNC(K, func) \
 	((int)K < 0 ? ((int)K >= SKF_LL_OFF ? func##_negative_offset : func) : func##_positive_offset)
 
@@ -212,7 +207,7 @@ struct jit_context {
 /* emit x64 prologue code for BPF program and check it's size.
  * bpf_tail_call helper will skip it while jumping into another program
  */
-static void emit_prologue(u8 **pprog, u32 stack_depth)
+static void emit_prologue(u8 **pprog, u32 stack_depth, bool ebpf_from_cbpf)
 {
 	u8 *prog = *pprog;
 	int cnt = 0;
@@ -247,18 +242,21 @@ static void emit_prologue(u8 **pprog, u32 stack_depth)
 	/* mov qword ptr [rbp+24],r15 */
 	EMIT4(0x4C, 0x89, 0x7D, 24);
 
-	/* Clear the tail call counter (tail_call_cnt): for eBPF tail calls
-	 * we need to reset the counter to 0. It's done in two instructions,
-	 * resetting rax register to 0 (xor on eax gets 0 extended), and
-	 * moving it to the counter location.
-	 */
+	if (!ebpf_from_cbpf) {
+		/* Clear the tail call counter (tail_call_cnt): for eBPF tail
+		 * calls we need to reset the counter to 0. It's done in two
+		 * instructions, resetting rax register to 0, and moving it
+		 * to the counter location.
+		 */
 
-	/* xor eax, eax */
-	EMIT2(0x31, 0xc0);
-	/* mov qword ptr [rbp+32], rax */
-	EMIT4(0x48, 0x89, 0x45, 32);
+		/* xor eax, eax */
+		EMIT2(0x31, 0xc0);
+		/* mov qword ptr [rbp+32], rax */
+		EMIT4(0x48, 0x89, 0x45, 32);
+
+		BUILD_BUG_ON(cnt != PROLOGUE_SIZE);
+	}
 
-	BUILD_BUG_ON(cnt != PROLOGUE_SIZE);
 	*pprog = prog;
 }
 
@@ -356,6 +354,86 @@ static void emit_load_skb_data_hlen(u8 **pprog)
 	*pprog = prog;
 }
 
+static void emit_mov_imm32(u8 **pprog, bool sign_propagate,
+			   u32 dst_reg, const u32 imm32)
+{
+	u8 *prog = *pprog;
+	u8 b1, b2, b3;
+	int cnt = 0;
+
+	/* optimization: if imm32 is positive, use 'mov %eax, imm32'
+	 * (which zero-extends imm32) to save 2 bytes.
+	 */
+	if (sign_propagate && (s32)imm32 < 0) {
+		/* 'mov %rax, imm32' sign extends imm32 */
+		b1 = add_1mod(0x48, dst_reg);
+		b2 = 0xC7;
+		b3 = 0xC0;
+		EMIT3_off32(b1, b2, add_1reg(b3, dst_reg), imm32);
+		goto done;
+	}
+
+	/* optimization: if imm32 is zero, use 'xor %eax, %eax'
+	 * to save 3 bytes.
+	 */
+	if (imm32 == 0) {
+		if (is_ereg(dst_reg))
+			EMIT1(add_2mod(0x40, dst_reg, dst_reg));
+		b2 = 0x31; /* xor */
+		b3 = 0xC0;
+		EMIT2(b2, add_2reg(b3, dst_reg, dst_reg));
+		goto done;
+	}
+
+	/* mov %eax, imm32 */
+	if (is_ereg(dst_reg))
+		EMIT1(add_1mod(0x40, dst_reg));
+	EMIT1_off32(add_1reg(0xB8, dst_reg), imm32);
+done:
+	*pprog = prog;
+}
+
+static void emit_mov_imm64(u8 **pprog, u32 dst_reg,
+			   const u32 imm32_hi, const u32 imm32_lo)
+{
+	u8 *prog = *pprog;
+	int cnt = 0;
+
+	if (is_uimm32(((u64)imm32_hi << 32) | (u32)imm32_lo)) {
+		/* For emitting plain u32, where sign bit must not be
+		 * propagated LLVM tends to load imm64 over mov32
+		 * directly, so save couple of bytes by just doing
+		 * 'mov %eax, imm32' instead.
+		 */
+		emit_mov_imm32(&prog, false, dst_reg, imm32_lo);
+	} else {
+		/* movabsq %rax, imm64 */
+		EMIT2(add_1mod(0x48, dst_reg), add_1reg(0xB8, dst_reg));
+		EMIT(imm32_lo, 4);
+		EMIT(imm32_hi, 4);
+	}
+
+	*pprog = prog;
+}
+
+static void emit_mov_reg(u8 **pprog, bool is64, u32 dst_reg, u32 src_reg)
+{
+	u8 *prog = *pprog;
+	int cnt = 0;
+
+	if (is64) {
+		/* mov dst, src */
+		EMIT_mov(dst_reg, src_reg);
+	} else {
+		/* mov32 dst, src */
+		if (is_ereg(dst_reg) || is_ereg(src_reg))
+			EMIT1(add_2mod(0x40, dst_reg, src_reg));
+		EMIT2(0x89, add_2reg(0xC0, dst_reg, src_reg));
+	}
+
+	*pprog = prog;
+}
+
 static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image,
 		  int oldproglen, struct jit_context *ctx)
 {
@@ -369,7 +447,8 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image,
 	int proglen = 0;
 	u8 *prog = temp;
 
-	emit_prologue(&prog, bpf_prog->aux->stack_depth);
+	emit_prologue(&prog, bpf_prog->aux->stack_depth,
+		      bpf_prog_was_classic(bpf_prog));
 
 	if (seen_ld_abs)
 		emit_load_skb_data_hlen(&prog);
@@ -378,7 +457,7 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image,
 		const s32 imm32 = insn->imm;
 		u32 dst_reg = insn->dst_reg;
 		u32 src_reg = insn->src_reg;
-		u8 b1 = 0, b2 = 0, b3 = 0;
+		u8 b2 = 0, b3 = 0;
 		s64 jmp_offset;
 		u8 jmp_cond;
 		bool reload_skb_data;
@@ -414,16 +493,11 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image,
 			EMIT2(b2, add_2reg(0xC0, dst_reg, src_reg));
 			break;
 
-			/* mov dst, src */
 		case BPF_ALU64 | BPF_MOV | BPF_X:
-			EMIT_mov(dst_reg, src_reg);
-			break;
-
-			/* mov32 dst, src */
 		case BPF_ALU | BPF_MOV | BPF_X:
-			if (is_ereg(dst_reg) || is_ereg(src_reg))
-				EMIT1(add_2mod(0x40, dst_reg, src_reg));
-			EMIT2(0x89, add_2reg(0xC0, dst_reg, src_reg));
+			emit_mov_reg(&prog,
+				     BPF_CLASS(insn->code) == BPF_ALU64,
+				     dst_reg, src_reg);
 			break;
 
 			/* neg dst */
@@ -486,58 +560,13 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image,
 			break;
 
 		case BPF_ALU64 | BPF_MOV | BPF_K:
-			/* optimization: if imm32 is positive,
-			 * use 'mov eax, imm32' (which zero-extends imm32)
-			 * to save 2 bytes
-			 */
-			if (imm32 < 0) {
-				/* 'mov rax, imm32' sign extends imm32 */
-				b1 = add_1mod(0x48, dst_reg);
-				b2 = 0xC7;
-				b3 = 0xC0;
-				EMIT3_off32(b1, b2, add_1reg(b3, dst_reg), imm32);
-				break;
-			}
-
 		case BPF_ALU | BPF_MOV | BPF_K:
-			/* optimization: if imm32 is zero, use 'xor <dst>,<dst>'
-			 * to save 3 bytes.
-			 */
-			if (imm32 == 0) {
-				if (is_ereg(dst_reg))
-					EMIT1(add_2mod(0x40, dst_reg, dst_reg));
-				b2 = 0x31; /* xor */
-				b3 = 0xC0;
-				EMIT2(b2, add_2reg(b3, dst_reg, dst_reg));
-				break;
-			}
-
-			/* mov %eax, imm32 */
-			if (is_ereg(dst_reg))
-				EMIT1(add_1mod(0x40, dst_reg));
-			EMIT1_off32(add_1reg(0xB8, dst_reg), imm32);
+			emit_mov_imm32(&prog, BPF_CLASS(insn->code) == BPF_ALU64,
+				       dst_reg, imm32);
 			break;
 
 		case BPF_LD | BPF_IMM | BPF_DW:
-			/* optimization: if imm64 is zero, use 'xor <dst>,<dst>'
-			 * to save 7 bytes.
-			 */
-			if (insn[0].imm == 0 && insn[1].imm == 0) {
-				b1 = add_2mod(0x48, dst_reg, dst_reg);
-				b2 = 0x31; /* xor */
-				b3 = 0xC0;
-				EMIT3(b1, b2, add_2reg(b3, dst_reg, dst_reg));
-
-				insn++;
-				i++;
-				break;
-			}
-
-			/* movabsq %rax, imm64 */
-			EMIT2(add_1mod(0x48, dst_reg), add_1reg(0xB8, dst_reg));
-			EMIT(insn[0].imm, 4);
-			EMIT(insn[1].imm, 4);
-
+			emit_mov_imm64(&prog, dst_reg, insn[1].imm, insn[0].imm);
 			insn++;
 			i++;
 			break;
@@ -594,36 +623,38 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image,
 		case BPF_ALU | BPF_MUL | BPF_X:
 		case BPF_ALU64 | BPF_MUL | BPF_K:
 		case BPF_ALU64 | BPF_MUL | BPF_X:
-			EMIT1(0x50); /* push rax */
-			EMIT1(0x52); /* push rdx */
+		{
+			bool is64 = BPF_CLASS(insn->code) == BPF_ALU64;
+
+			if (dst_reg != BPF_REG_0)
+				EMIT1(0x50); /* push rax */
+			if (dst_reg != BPF_REG_3)
+				EMIT1(0x52); /* push rdx */
 
 			/* mov r11, dst_reg */
 			EMIT_mov(AUX_REG, dst_reg);
 
 			if (BPF_SRC(insn->code) == BPF_X)
-				/* mov rax, src_reg */
-				EMIT_mov(BPF_REG_0, src_reg);
+				emit_mov_reg(&prog, is64, BPF_REG_0, src_reg);
 			else
-				/* mov rax, imm32 */
-				EMIT3_off32(0x48, 0xC7, 0xC0, imm32);
+				emit_mov_imm32(&prog, is64, BPF_REG_0, imm32);
 
-			if (BPF_CLASS(insn->code) == BPF_ALU64)
+			if (is64)
 				EMIT1(add_1mod(0x48, AUX_REG));
 			else if (is_ereg(AUX_REG))
 				EMIT1(add_1mod(0x40, AUX_REG));
 			/* mul(q) r11 */
 			EMIT2(0xF7, add_1reg(0xE0, AUX_REG));
 
-			/* mov r11, rax */
-			EMIT_mov(AUX_REG, BPF_REG_0);
-
-			EMIT1(0x5A); /* pop rdx */
-			EMIT1(0x58); /* pop rax */
-
-			/* mov dst_reg, r11 */
-			EMIT_mov(dst_reg, AUX_REG);
+			if (dst_reg != BPF_REG_3)
+				EMIT1(0x5A); /* pop rdx */
+			if (dst_reg != BPF_REG_0) {
+				/* mov dst_reg, rax */
+				EMIT_mov(dst_reg, BPF_REG_0);
+				EMIT1(0x58); /* pop rax */
+			}
 			break;
-
+		}
 			/* shifts */
 		case BPF_ALU | BPF_LSH | BPF_K:
 		case BPF_ALU | BPF_RSH | BPF_K:
@@ -641,7 +672,11 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image,
 			case BPF_RSH: b3 = 0xE8; break;
 			case BPF_ARSH: b3 = 0xF8; break;
 			}
-			EMIT3(0xC1, add_1reg(b3, dst_reg), imm32);
+
+			if (imm32 == 1)
+				EMIT2(0xD1, add_1reg(b3, dst_reg));
+			else
+				EMIT3(0xC1, add_1reg(b3, dst_reg), imm32);
 			break;
 
 		case BPF_ALU | BPF_LSH | BPF_X:
@@ -1222,7 +1257,6 @@ skip_init_addrs:
 		bpf_jit_dump(prog->len, proglen, pass + 1, image);
 
 	if (image) {
-		bpf_flush_icache(header, image + proglen);
 		if (!prog->is_func || extra_pass) {
 			bpf_jit_binary_lock_ro(header);
 		} else {