[ARM] pxafb: add support for overlay1 and overlay2 as framebuffer devices

PXA27x and later processors support overlay1 and overlay2 on-top of the
base framebuffer (although under-neath the base is also possible). They
support palette and no-palette RGB formats, as well as YUV formats (only
available on overlay2). These overlays have dedicated DMA channels and
behave in a similar way as a framebuffer.

This heavily simplified and re-structured work is based on the original
pxafb_overlay.c (which is pending for mainline merge for a long time).

The major problems with this pxafb_overlay.c are (if you are interested
in the history):

  1. heavily redundant (the control logics for overlay1 and overlay2 are
     actually identical except for some small operations,  which are now
     abstracted into a 'pxafb_layer_ops' structure)

  2. a lot of useless and un-tested code (two workarounds which are now
     fixed on mature silicons)

  3. cursorfb is actually useless, hardware cursor should not be used
     this way, and the code was actually un-tested for a long time.

The code in this patch should be self-explanatory, I tried to add minimum
comments. As said, this is basically simplified, there are several things
still on the pending list:

  1. palette mode is un-supported and un-tested (although re-using the
     palette code of the base framebuffer is actually very easy now with
     previous clean-up patches)

  2. fb_pan_display for overlay(s) is un-supported

  3. the base framebuffer can actually be abstracted by 'pxafb_layer' as
     well, which will help further re-use of the code and keep a better
     and consistent structure. (This is the reason I named it 'pxafb_layer'
     instead of 'pxafb_overlay' or something alike)

See Documentation/fb/pxafb.txt for additional usage information.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Cc: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Eric Miao <ycmiao@ycmiao-hp520.(none)>

1 files changed, 25 insertions, 9 deletions

diff --git a/arch/arm/mach-pxa/include/mach/regs-lcd.h b/arch/arm/mach-pxa/include/mach/regs-lcd.h
index aff3b87..f82dcea 100644
--- a/arch/arm/mach-pxa/include/mach/regs-lcd.h
+++ b/arch/arm/mach-pxa/include/mach/regs-lcd.h
@@ -12,7 +12,8 @@
 #define LCCR3		(0x00C)	/* LCD Controller Control Register 3 */
 #define LCCR4		(0x010)	/* LCD Controller Control Register 4 */
 #define LCCR5		(0x014)	/* LCD Controller Control Register 5 */
-#define LCSR		(0x038)	/* LCD Controller Status Register */
+#define LCSR		(0x038)	/* LCD Controller Status Register 0 */
+#define LCSR1		(0x034)	/* LCD Controller Status Register 1 */
 #define LIIDR		(0x03C)	/* LCD Controller Interrupt ID Register */
 #define TMEDRGBR	(0x040)	/* TMED RGB Seed Register */
 #define TMEDCR		(0x044)	/* TMED Control Register */
@@ -25,6 +26,11 @@
 #define FBR5		(0x110) /* DMA Channel 2 Frame Branch Register */
 #define FBR6		(0x114) /* DMA Channel 2 Frame Branch Register */
 
+#define OVL1C1		(0x050)	/* Overlay 1 Control Register 1 */
+#define OVL1C2		(0x060)	/* Overlay 1 Control Register 2 */
+#define OVL2C1		(0x070)	/* Overlay 2 Control Register 1 */
+#define OVL2C2		(0x080)	/* Overlay 2 Control Register 2 */
+
 #define CMDCR		(0x100)	/* Command Control Register */
 #define PRSR		(0x104)	/* Panel Read Status Register */
 
@@ -42,16 +48,12 @@
 #define LCCR4_PAL_FOR_MASK	(3 << 15)
 
 #define FDADR0		(0x200)	/* DMA Channel 0 Frame Descriptor Address Register */
-#define FSADR0		(0x204)	/* DMA Channel 0 Frame Source Address Register */
-#define FIDR0		(0x208)	/* DMA Channel 0 Frame ID Register */
-#define LDCMD0		(0x20C)	/* DMA Channel 0 Command Register */
 #define FDADR1		(0x210)	/* DMA Channel 1 Frame Descriptor Address Register */
-#define FSADR1		(0x214)	/* DMA Channel 1 Frame Source Address Register */
-#define FIDR1		(0x218)	/* DMA Channel 1 Frame ID Register */
-#define LDCMD1		(0x21C)	/* DMA Channel 1 Command Register */
+#define FDADR2		(0x220)	/* DMA Channel 2 Frame Descriptor Address Register */
+#define FDADR3		(0x230)	/* DMA Channel 3 Frame Descriptor Address Register */
+#define FDADR4		(0x240)	/* DMA Channel 4 Frame Descriptor Address Register */
+#define FDADR5		(0x250)	/* DMA Channel 5 Frame Descriptor Address Register */
 #define FDADR6		(0x260) /* DMA Channel 6 Frame Descriptor Address Register */
-#define FSADR6		(0x264) /* DMA Channel 6 Frame Source Address Register */
-#define FIDR6		(0x268) /* DMA Channel 6 Frame ID Register */
 
 #define LCCR0_ENB	(1 << 0)	/* LCD Controller enable */
 #define LCCR0_CMS	(1 << 1)	/* Color/Monochrome Display Select */
@@ -151,8 +153,22 @@
 #define LCSR_RD_ST	(1 << 11)	/* read status */
 #define LCSR_CMD_INT	(1 << 12)	/* command interrupt */
 
+#define LCSR1_IU(x)	(1 << ((x) + 23)) /* Input FIFO underrun */
+#define LCSR1_BS(x)	(1 << ((x) + 15)) /* Branch Status */
+#define LCSR1_EOF(x)	(1 << ((x) + 7))  /* End of Frame Status */
+#define LCSR1_SOF(x)	(1 << ((x) - 1))  /* Start of Frame Status */
+
 #define LDCMD_PAL	(1 << 26)	/* instructs DMA to load palette buffer */
 
+/* overlay control registers */
+#define OVLxC1_PPL(x)	((((x) - 1) & 0x3ff) << 0)	/* Pixels Per Line */
+#define OVLxC1_LPO(x)	((((x) - 1) & 0x3ff) << 10)	/* Number of Lines */
+#define OVLxC1_BPP(x)	(((x) & 0xf) << 20)	/* Bits Per Pixel */
+#define OVLxC1_OEN	(1 << 31)		/* Enable bit for Overlay */
+#define OVLxC2_XPOS(x)	(((x) & 0x3ff) << 0)	/* Horizontal Position */
+#define OVLxC2_YPOS(x)	(((x) & 0x3ff) << 10)	/* Vertical Position */
+#define OVL2C2_PFOR(x)	(((x) & 0x7) << 20)	/* Pixel Format */
+
 /* smartpanel related */
 #define PRSR_DATA(x)	((x) & 0xff)	/* Panel Data */
 #define PRSR_A0		(1 << 8)	/* Read Data Source */