summaryrefslogtreecommitdiffstats
path: root/arch/xtensa/Kconfig
diff options
context:
space:
mode:
authorChris Zankel <czankel@tensilica.com>2005-06-23 22:01:10 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-06-24 00:05:21 -0700
commit8e1a6dd2fddcc73c9e933758361e3d9c076c688a (patch)
tree30d6c0cdc7f21d1357917517351a1c259f3eba4b /arch/xtensa/Kconfig
parent48b415ca13bac91f83db3b9d362fd5ae0ce275cb (diff)
downloadop-kernel-dev-8e1a6dd2fddcc73c9e933758361e3d9c076c688a.zip
op-kernel-dev-8e1a6dd2fddcc73c9e933758361e3d9c076c688a.tar.gz
[PATCH] xtensa: Architecture support for Tensilica Xtensa Part 1
The attached patches provides part 1 of an architecture implementation for the Tensilica Xtensa CPU series. Signed-off-by: Chris Zankel <chris@zankel.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Diffstat (limited to 'arch/xtensa/Kconfig')
-rw-r--r--arch/xtensa/Kconfig258
1 files changed, 258 insertions, 0 deletions
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
new file mode 100644
index 0000000..3e89767
--- /dev/null
+++ b/arch/xtensa/Kconfig
@@ -0,0 +1,258 @@
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/config-language.txt.
+
+mainmenu "Linux/Xtensa Kernel Configuration"
+
+config FRAME_POINTER
+ bool
+ default n
+
+config XTENSA
+ bool
+ default y
+ help
+ Xtensa processors are 32-bit RISC machines designed by Tensilica
+ primarily for embedded systems. These processors are both
+ configurable and extensible. The Linux port to the Xtensa
+ architecture supports all processor configurations and extensions,
+ with reasonable minimum requirements. The Xtensa Linux project has
+ a home page at <http://xtensa.sourceforge.net/>.
+
+config UID16
+ bool
+ default n
+
+config RWSEM_XCHGADD_ALGORITHM
+ bool
+ default y
+
+config HAVE_DEC_LOCK
+ bool
+ default y
+
+config GENERIC_HARDIRQS
+ bool
+ default y
+
+source "init/Kconfig"
+
+menu "Processor type and features"
+
+choice
+ prompt "Xtensa Processor Configuration"
+ default XTENSA_CPU_LINUX_BE
+
+config XTENSA_CPU_LINUX_BE
+ bool "linux_be"
+ ---help---
+ The linux_be processor configuration is the baseline Xtensa
+ configurations included in this kernel and also used by
+ binutils, gcc, and gdb. It contains no TIE, no coprocessors,
+ and the following configuration options:
+
+ Code Density Option 2 Misc Special Registers
+ NSA/NSAU Instructions 128-bit Data Bus Width
+ Processor ID 8K, 2-way I and D Caches
+ Zero-Overhead Loops 2 Inst Address Break Registers
+ Big Endian 2 Data Address Break Registers
+ 64 General-Purpose Registers JTAG Interface and Trace Port
+ 17 Interrupts MMU w/ TLBs and Autorefill
+ 3 Interrupt Levels 8 Autorefill Ways (I/D TLBs)
+ 3 Timers Unaligned Exceptions
+endchoice
+
+config MMU
+ bool
+ default y
+
+config XTENSA_UNALIGNED_USER
+ bool "Unaligned memory access in use space"
+ ---help---
+ The Xtensa architecture currently does not handle unaligned
+ memory accesses in hardware but through an exception handler.
+ Per default, unaligned memory accesses are disabled in user space.
+
+ Say Y here to enable unaligned memory access in user space.
+
+config PREEMPT
+ bool "Preemptible Kernel"
+ ---help---
+ This option reduces the latency of the kernel when reacting to
+ real-time or interactive events by allowing a low priority process to
+ be preempted even if it is in kernel mode executing a system call.
+ Unfortunately the kernel code has some race conditions if both
+ CONFIG_SMP and CONFIG_PREEMPT are enabled, so this option is
+ currently disabled if you are building an SMP kernel.
+
+ Say Y here if you are building a kernel for a desktop, embedded
+ or real-time system. Say N if you are unsure.
+
+config MATH_EMULATION
+ bool "Math emulation"
+ help
+ Can we use information of configuration file?
+
+config HIGHMEM
+ bool "High memory support"
+
+endmenu
+
+menu "Platform options"
+
+choice
+ prompt "Xtensa System Type"
+ default XTENSA_PLATFORM_ISS
+
+config XTENSA_PLATFORM_ISS
+ bool "ISS"
+ help
+ ISS is an acronym for Tensilica's Instruction Set Simulator.
+
+config XTENSA_PLATFORM_XT2000
+ bool "XT2000"
+ help
+ XT2000 is the name of Tensilica's feature-rich emulation platform.
+ This hardware is capable of running a full Linux distribution.
+
+endchoice
+
+
+config XTENSA_CALIBRATE_CCOUNT
+ bool "Auto calibration of the CPU clock rate"
+ ---help---
+ On some platforms (XT2000, for example), the CPU clock rate can
+ vary. The frequency can be determined, however, by measuring
+ against a well known, fixed frequency, such as an UART oscillator.
+
+config XTENSA_CPU_CLOCK
+ int "CPU clock rate [MHz]"
+ depends on !XTENSA_CALIBRATE_CCOUNT
+ default "16"
+
+config GENERIC_CALIBRATE_DELAY
+ bool "Auto calibration of the BogoMIPS value"
+ ---help---
+ The BogoMIPS value can easily derived from the CPU frequency.
+
+config CMDLINE_BOOL
+ bool "Default bootloader kernel arguments"
+
+config CMDLINE
+ string "Initial kernel command string"
+ depends on CMDLINE_BOOL
+ default "console=ttyS0,38400 root=/dev/ram"
+ help
+ On some architectures (EBSA110 and CATS), there is currently no way
+ for the boot loader to pass arguments to the kernel. For these
+ architectures, you should supply some command-line options at build
+ time by entering them here. As a minimum, you should specify the
+ memory size and the root device (e.g., mem=64M root=/dev/nfs).
+
+config SERIAL_CONSOLE
+ bool
+ depends on XTENSA_PLATFORM_ISS
+ default y
+
+config XTENSA_ISS_NETWORK
+ bool
+ depends on XTENSA_PLATFORM_ISS
+ default y
+
+endmenu
+
+menu "Bus options"
+
+config PCI
+ bool "PCI support" if !XTENSA_PLATFORM_ISS
+ depends on !XTENSA_PLATFORM_ISS
+ default y
+ help
+ Find out whether you have a PCI motherboard. PCI is the name of a
+ bus system, i.e. the way the CPU talks to the other stuff inside
+ your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
+ VESA. If you have PCI, say Y, otherwise N.
+
+ The PCI-HOWTO, available from
+ <http://www.linuxdoc.org/docs.html#howto>, contains valuable
+ information about which PCI hardware does work under Linux and which
+ doesn't
+
+source "drivers/pci/Kconfig"
+
+config HOTPLUG
+
+ bool "Support for hot-pluggable devices"
+ ---help---
+ Say Y here if you want to plug devices into your computer while
+ the system is running, and be able to use them quickly. In many
+ cases, the devices can likewise be unplugged at any time too.
+
+ One well known example of this is PCMCIA- or PC-cards, credit-card
+ size devices such as network cards, modems or hard drives which are
+ plugged into slots found on all modern laptop computers. Another
+ example, used on modern desktops as well as laptops, is USB.
+
+ Enable HOTPLUG and KMOD, and build a modular kernel. Get agent
+ software (at <http://linux-hotplug.sourceforge.net/>) and install it.
+ Then your kernel will automatically call out to a user mode "policy
+ agent" (/sbin/hotplug) to load modules and set up software needed
+ to use devices as you hotplug them.
+
+source "drivers/pcmcia/Kconfig"
+
+source "drivers/pci/hotplug/Kconfig"
+
+endmenu
+
+menu "Exectuable file formats"
+
+# only elf supported
+config KCORE_ELF
+ bool
+ depends on PROC_FS
+ default y
+ help
+ If you enabled support for /proc file system then the file
+ /proc/kcore will contain the kernel core image in ELF format. This
+ can be used in gdb:
+
+ $ cd /usr/src/linux ; gdb vmlinux /proc/kcore
+
+ This is especially useful if you have compiled the kernel with the
+ "-g" option to preserve debugging information. It is mainly used
+ for examining kernel data structures on the live kernel.
+
+source "fs/Kconfig.binfmt"
+
+endmenu
+
+source "drivers/Kconfig"
+
+source "fs/Kconfig"
+
+menu "Xtensa initrd options"
+ depends on BLK_DEV_INITRD
+
+ config EMBEDDED_RAMDISK
+ bool "Embed root filesystem ramdisk into the kernel"
+
+config EMBEDDED_RAMDISK_IMAGE
+ string "Filename of gziped ramdisk image"
+ depends on EMBEDDED_RAMDISK
+ default "ramdisk.gz"
+ help
+ This is the filename of the ramdisk image to be built into the
+ kernel. Relative pathnames are relative to arch/xtensa/boot/ramdisk/.
+ The ramdisk image is not part of the kernel distribution; you must
+ provide one yourself.
+endmenu
+
+source "arch/xtensa/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"
+
+
OpenPOWER on IntegriCloud