x86_64: move kernel

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

68 files changed, 9 insertions, 25462 deletions

diff --git a/arch/x86_64/Makefile b/arch/x86_64/Makefile
index 189d80d..afaf0f9 100644
--- a/arch/x86_64/Makefile
+++ b/arch/x86_64/Makefile
@@ -21,6 +21,13 @@
 #
 # $Id: Makefile,v 1.31 2002/03/22 15:56:07 ak Exp $
 
+# Fill in SRCARCH
+SRCARCH	:= x86
+
+archprepare:
+	@mkdir -p ${objtree}/arch/x86/kernel
+
+
 LDFLAGS		:= -m elf_x86_64
 OBJCOPYFLAGS	:= -O binary -R .note -R .comment -S
 LDFLAGS_vmlinux :=
@@ -71,10 +78,10 @@ CFLAGS += $(cflags-y)
 CFLAGS_KERNEL += $(cflags-kernel-y)
 AFLAGS += -m64
 
-head-y := arch/x86_64/kernel/head_64.o arch/x86_64/kernel/head64.o arch/x86_64/kernel/init_task_64.o
+head-y := arch/x86/kernel/head_64.o arch/x86/kernel/head64.o arch/x86/kernel/init_task_64.o
 
 libs-y 					+= arch/x86/lib/
-core-y					+= arch/x86_64/kernel/ \
+core-y					+= arch/x86/kernel/ \
 					   arch/x86/mm/ \
 					   arch/x86/crypto/ \
 					   arch/x86/vdso/
diff --git a/arch/x86_64/kernel/Makefile b/arch/x86_64/kernel/Makefile
deleted file mode 100644
index 577d08f..0000000
--- a/arch/x86_64/kernel/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-ifeq ($(CONFIG_X86_32),y)
-include ${srctree}/arch/x86/kernel/Makefile_32
-else
-include ${srctree}/arch/x86_64/kernel/Makefile_64
-endif
diff --git a/arch/x86_64/kernel/Makefile_64 b/arch/x86_64/kernel/Makefile_64
deleted file mode 100644
index 120d4e5..0000000
--- a/arch/x86_64/kernel/Makefile_64
+++ /dev/null
@@ -1,63 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-extra-y 	:= head_64.o head64.o init_task_64.o vmlinux.lds
-EXTRA_AFLAGS	:= -traditional
-obj-y	:= process_64.o signal_64.o entry_64.o traps_64.o irq_64.o \
-		ptrace_64.o time_64.o ioport_64.o ldt_64.o setup_64.o i8259_64.o sys_x86_64.o \
-		x8664_ksyms_64.o i387_64.o syscall_64.o vsyscall_64.o \
-		setup64.o bootflag.o e820_64.o reboot_64.o quirks.o i8237.o \
-		pci-dma_64.o pci-nommu_64.o alternative.o hpet_64.o tsc_64.o bugs_64.o \
-		perfctr-watchdog.o
-
-obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
-obj-$(CONFIG_X86_MCE)		+= mce_64.o therm_throt.o
-obj-$(CONFIG_X86_MCE_INTEL)	+= mce_intel_64.o
-obj-$(CONFIG_X86_MCE_AMD)	+= mce_amd_64.o
-obj-$(CONFIG_MTRR)		+= ../../x86/kernel/cpu/mtrr/
-obj-$(CONFIG_ACPI)		+= ../../x86/kernel/acpi/
-obj-$(CONFIG_X86_MSR)		+= msr.o
-obj-$(CONFIG_MICROCODE)		+= microcode.o
-obj-$(CONFIG_X86_CPUID)		+= cpuid.o
-obj-$(CONFIG_SMP)		+= smp_64.o smpboot_64.o trampoline_64.o tsc_sync.o
-obj-y				+= apic_64.o  nmi_64.o
-obj-y				+= io_apic_64.o mpparse_64.o genapic_64.o genapic_flat_64.o
-obj-$(CONFIG_KEXEC)		+= machine_kexec_64.o relocate_kernel_64.o crash_64.o
-obj-$(CONFIG_CRASH_DUMP)	+= crash_dump_64.o
-obj-$(CONFIG_PM)		+= suspend_64.o
-obj-$(CONFIG_HIBERNATION)	+= suspend_asm_64.o
-obj-$(CONFIG_CPU_FREQ)		+= ../../x86/kernel/cpu/cpufreq/
-obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
-obj-$(CONFIG_IOMMU)		+= pci-gart_64.o aperture_64.o
-obj-$(CONFIG_CALGARY_IOMMU)	+= pci-calgary_64.o tce_64.o
-obj-$(CONFIG_SWIOTLB)		+= pci-swiotlb_64.o
-obj-$(CONFIG_KPROBES)		+= kprobes_64.o
-obj-$(CONFIG_X86_PM_TIMER)	+= pmtimer_64.o
-obj-$(CONFIG_X86_VSMP)		+= vsmp_64.o
-obj-$(CONFIG_K8_NB)		+= k8.o
-obj-$(CONFIG_AUDIT)		+= audit_64.o
-
-obj-$(CONFIG_MODULES)		+= module_64.o
-obj-$(CONFIG_PCI)		+= early-quirks_64.o
-
-obj-y				+= topology.o
-obj-y				+= intel_cacheinfo.o
-obj-y				+= addon_cpuid_features.o
-obj-y				+= pcspeaker.o
-
-CFLAGS_vsyscall_64.o		:= $(PROFILING) -g0
-
-therm_throt-y                   += ../../x86/kernel/cpu/mcheck/therm_throt.o
-bootflag-y			+= ../../x86/kernel/bootflag.o
-cpuid-$(subst m,y,$(CONFIG_X86_CPUID))  += ../../x86/kernel/cpuid.o
-topology-y                     += ../../x86/kernel/topology.o
-microcode-$(subst m,y,$(CONFIG_MICROCODE))  += ../../x86/kernel/microcode.o
-intel_cacheinfo-y		+= ../../x86/kernel/cpu/intel_cacheinfo.o
-addon_cpuid_features-y		+= ../../x86/kernel/cpu/addon_cpuid_features.o
-quirks-y			+= ../../x86/kernel/quirks.o
-i8237-y				+= ../../x86/kernel/i8237.o
-msr-$(subst m,y,$(CONFIG_X86_MSR))  += ../../x86/kernel/msr.o
-alternative-y			+= ../../x86/kernel/alternative.o
-pcspeaker-y			+= ../../x86/kernel/pcspeaker.o
-perfctr-watchdog-y		+= ../../x86/kernel/cpu/perfctr-watchdog.o
diff --git a/arch/x86_64/kernel/aperture_64.c b/arch/x86_64/kernel/aperture_64.c
deleted file mode 100644
index 8f681cae7..0000000
--- a/arch/x86_64/kernel/aperture_64.c
+++ /dev/null
@@ -1,298 +0,0 @@
-/* 
- * Firmware replacement code.
- * 
- * Work around broken BIOSes that don't set an aperture or only set the
- * aperture in the AGP bridge. 
- * If all fails map the aperture over some low memory.  This is cheaper than 
- * doing bounce buffering. The memory is lost. This is done at early boot 
- * because only the bootmem allocator can allocate 32+MB. 
- * 
- * Copyright 2002 Andi Kleen, SuSE Labs.
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-#include <linux/mmzone.h>
-#include <linux/pci_ids.h>
-#include <linux/pci.h>
-#include <linux/bitops.h>
-#include <linux/ioport.h>
-#include <asm/e820.h>
-#include <asm/io.h>
-#include <asm/iommu.h>
-#include <asm/pci-direct.h>
-#include <asm/dma.h>
-#include <asm/k8.h>
-
-int iommu_aperture;
-int iommu_aperture_disabled __initdata = 0;
-int iommu_aperture_allowed __initdata = 0;
-
-int fallback_aper_order __initdata = 1; /* 64MB */
-int fallback_aper_force __initdata = 0; 
-
-int fix_aperture __initdata = 1;
-
-static struct resource gart_resource = {
-	.name	= "GART",
-	.flags	= IORESOURCE_MEM,
-};
-
-static void __init insert_aperture_resource(u32 aper_base, u32 aper_size)
-{
-	gart_resource.start = aper_base;
-	gart_resource.end = aper_base + aper_size - 1;
-	insert_resource(&iomem_resource, &gart_resource);
-}
-
-/* This code runs before the PCI subsystem is initialized, so just
-   access the northbridge directly. */
-
-static u32 __init allocate_aperture(void) 
-{
-	u32 aper_size;
-	void *p; 
-
-	if (fallback_aper_order > 7) 
-		fallback_aper_order = 7; 
-	aper_size = (32 * 1024 * 1024) << fallback_aper_order; 
-
-	/* 
-	 * Aperture has to be naturally aligned. This means an 2GB aperture won't
-	 * have much chance of finding a place in the lower 4GB of memory.
-	 * Unfortunately we cannot move it up because that would make the
-	 * IOMMU useless.
-	 */
-	p = __alloc_bootmem_nopanic(aper_size, aper_size, 0);
-	if (!p || __pa(p)+aper_size > 0xffffffff) {
-		printk("Cannot allocate aperture memory hole (%p,%uK)\n",
-		       p, aper_size>>10);
-		if (p)
-			free_bootmem(__pa(p), aper_size);
-		return 0;
-	}
-	printk("Mapping aperture over %d KB of RAM @ %lx\n",
-	       aper_size >> 10, __pa(p)); 
-	insert_aperture_resource((u32)__pa(p), aper_size);
-	return (u32)__pa(p); 
-}
-
-static int __init aperture_valid(u64 aper_base, u32 aper_size)
-{ 
-	if (!aper_base) 
-		return 0;
-	if (aper_size < 64*1024*1024) { 
-		printk("Aperture too small (%d MB)\n", aper_size>>20);
-		return 0;
-	}
-	if (aper_base + aper_size > 0x100000000UL) {
-		printk("Aperture beyond 4GB. Ignoring.\n");
-		return 0; 
-	}
-	if (e820_any_mapped(aper_base, aper_base + aper_size, E820_RAM)) {
-		printk("Aperture pointing to e820 RAM. Ignoring.\n");
-		return 0; 
-	} 
-	return 1;
-} 
-
-/* Find a PCI capability */
-static __u32 __init find_cap(int num, int slot, int func, int cap) 
-{ 
-	u8 pos;
-	int bytes;
-	if (!(read_pci_config_16(num,slot,func,PCI_STATUS) & PCI_STATUS_CAP_LIST))
-		return 0;
-	pos = read_pci_config_byte(num,slot,func,PCI_CAPABILITY_LIST);
-	for (bytes = 0; bytes < 48 && pos >= 0x40; bytes++) { 
-		u8 id;
-		pos &= ~3; 
-		id = read_pci_config_byte(num,slot,func,pos+PCI_CAP_LIST_ID);
-		if (id == 0xff)
-			break;
-		if (id == cap) 
-			return pos; 
-		pos = read_pci_config_byte(num,slot,func,pos+PCI_CAP_LIST_NEXT); 
-	} 
-	return 0;
-} 
-
-/* Read a standard AGPv3 bridge header */
-static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order)
-{ 
-	u32 apsize;
-	u32 apsizereg;
-	int nbits;
-	u32 aper_low, aper_hi;
-	u64 aper;
-
-	printk("AGP bridge at %02x:%02x:%02x\n", num, slot, func);
-	apsizereg = read_pci_config_16(num,slot,func, cap + 0x14);
-	if (apsizereg == 0xffffffff) {
-		printk("APSIZE in AGP bridge unreadable\n");
-		return 0;
-	}
-
-	apsize = apsizereg & 0xfff;
-	/* Some BIOS use weird encodings not in the AGPv3 table. */
-	if (apsize & 0xff) 
-		apsize |= 0xf00; 
-	nbits = hweight16(apsize);
-	*order = 7 - nbits;
-	if ((int)*order < 0) /* < 32MB */
-		*order = 0;
-	
-	aper_low = read_pci_config(num,slot,func, 0x10);
-	aper_hi = read_pci_config(num,slot,func,0x14);
-	aper = (aper_low & ~((1<<22)-1)) | ((u64)aper_hi << 32);
-
-	printk("Aperture from AGP @ %Lx size %u MB (APSIZE %x)\n", 
-	       aper, 32 << *order, apsizereg);
-
-	if (!aperture_valid(aper, (32*1024*1024) << *order))
-	    return 0;
-	return (u32)aper; 
-} 
-
-/* Look for an AGP bridge. Windows only expects the aperture in the
-   AGP bridge and some BIOS forget to initialize the Northbridge too.
-   Work around this here. 
-
-   Do an PCI bus scan by hand because we're running before the PCI
-   subsystem. 
-
-   All K8 AGP bridges are AGPv3 compliant, so we can do this scan
-   generically. It's probably overkill to always scan all slots because
-   the AGP bridges should be always an own bus on the HT hierarchy, 
-   but do it here for future safety. */
-static __u32 __init search_agp_bridge(u32 *order, int *valid_agp)
-{
-	int num, slot, func;
-
-	/* Poor man's PCI discovery */
-	for (num = 0; num < 256; num++) { 
-		for (slot = 0; slot < 32; slot++) { 
-			for (func = 0; func < 8; func++) { 
-				u32 class, cap;
-				u8 type;
-				class = read_pci_config(num,slot,func,
-							PCI_CLASS_REVISION);
-				if (class == 0xffffffff)
-					break; 
-				
-				switch (class >> 16) { 
-				case PCI_CLASS_BRIDGE_HOST:
-				case PCI_CLASS_BRIDGE_OTHER: /* needed? */
-					/* AGP bridge? */
-					cap = find_cap(num,slot,func,PCI_CAP_ID_AGP);
-					if (!cap)
-						break;
-					*valid_agp = 1; 
-					return read_agp(num,slot,func,cap,order);
-				} 
-				
-				/* No multi-function device? */
-				type = read_pci_config_byte(num,slot,func,
-							       PCI_HEADER_TYPE);
-				if (!(type & 0x80))
-					break;
-			} 
-		} 
-	}
-	printk("No AGP bridge found\n"); 
-	return 0;
-}
-
-void __init iommu_hole_init(void) 
-{ 
-	int fix, num; 
-	u32 aper_size, aper_alloc = 0, aper_order = 0, last_aper_order = 0;
-	u64 aper_base, last_aper_base = 0;
-	int valid_agp = 0;
-
-	if (iommu_aperture_disabled || !fix_aperture || !early_pci_allowed())
-		return;
-
-	printk(KERN_INFO  "Checking aperture...\n");
-
-	fix = 0;
-	for (num = 24; num < 32; num++) {		
-		if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00)))
-			continue;
-
-		iommu_detected = 1;
-		iommu_aperture = 1; 
-
-		aper_order = (read_pci_config(0, num, 3, 0x90) >> 1) & 7; 
-		aper_size = (32 * 1024 * 1024) << aper_order; 
-		aper_base = read_pci_config(0, num, 3, 0x94) & 0x7fff;
-		aper_base <<= 25; 
-
-		printk("CPU %d: aperture @ %Lx size %u MB\n", num-24, 
-		       aper_base, aper_size>>20);
-		
-		if (!aperture_valid(aper_base, aper_size)) {
-			fix = 1; 
-			break; 
-		}
-
-		if ((last_aper_order && aper_order != last_aper_order) ||
-		    (last_aper_base && aper_base != last_aper_base)) {
-			fix = 1;
-			break;
-		}
-		last_aper_order = aper_order;
-		last_aper_base = aper_base;
-	} 
-
-	if (!fix && !fallback_aper_force) {
-		if (last_aper_base) {
-			unsigned long n = (32 * 1024 * 1024) << last_aper_order;
-			insert_aperture_resource((u32)last_aper_base, n);
-		}
-		return; 
-	}
-
-	if (!fallback_aper_force)
-		aper_alloc = search_agp_bridge(&aper_order, &valid_agp); 
-		
-	if (aper_alloc) { 
-		/* Got the aperture from the AGP bridge */
-	} else if (swiotlb && !valid_agp) {
-		/* Do nothing */
-	} else if ((!no_iommu && end_pfn > MAX_DMA32_PFN) ||
-		   force_iommu ||
-		   valid_agp ||
-		   fallback_aper_force) { 
-		printk("Your BIOS doesn't leave a aperture memory hole\n");
-		printk("Please enable the IOMMU option in the BIOS setup\n");
-		printk("This costs you %d MB of RAM\n",
-		       32 << fallback_aper_order);
-
-		aper_order = fallback_aper_order;
-		aper_alloc = allocate_aperture();
-		if (!aper_alloc) { 
-			/* Could disable AGP and IOMMU here, but it's probably
-			   not worth it. But the later users cannot deal with
-			   bad apertures and turning on the aperture over memory
-			   causes very strange problems, so it's better to 
-			   panic early. */
-			panic("Not enough memory for aperture");
-		}
-	} else { 
-		return; 
-	} 
-
-	/* Fix up the north bridges */
-	for (num = 24; num < 32; num++) { 		
-		if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00)))
-			continue;	
-
-		/* Don't enable translation yet. That is done later. 
-		   Assume this BIOS didn't initialise the GART so 
-		   just overwrite all previous bits */ 
-		write_pci_config(0, num, 3, 0x90, aper_order<<1); 
-		write_pci_config(0, num, 3, 0x94, aper_alloc>>25); 
-	} 
-} 
diff --git a/arch/x86_64/kernel/apic_64.c b/arch/x86_64/kernel/apic_64.c
deleted file mode 100644
index 925758d..0000000
--- a/arch/x86_64/kernel/apic_64.c
+++ /dev/null
@@ -1,1253 +0,0 @@
-/*
- *	Local APIC handling, local APIC timers
- *
- *	(c) 1999, 2000 Ingo Molnar <mingo@redhat.com>
- *
- *	Fixes
- *	Maciej W. Rozycki	:	Bits for genuine 82489DX APICs;
- *					thanks to Eric Gilmore
- *					and Rolf G. Tews
- *					for testing these extensively.
- *	Maciej W. Rozycki	:	Various updates and fixes.
- *	Mikael Pettersson	:	Power Management for UP-APIC.
- *	Pavel Machek and
- *	Mikael Pettersson	:	PM converted to driver model.
- */
-
-#include <linux/init.h>
-
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/bootmem.h>
-#include <linux/interrupt.h>
-#include <linux/mc146818rtc.h>
-#include <linux/kernel_stat.h>
-#include <linux/sysdev.h>
-#include <linux/module.h>
-#include <linux/ioport.h>
-
-#include <asm/atomic.h>
-#include <asm/smp.h>
-#include <asm/mtrr.h>
-#include <asm/mpspec.h>
-#include <asm/pgalloc.h>
-#include <asm/mach_apic.h>
-#include <asm/nmi.h>
-#include <asm/idle.h>
-#include <asm/proto.h>
-#include <asm/timex.h>
-#include <asm/hpet.h>
-#include <asm/apic.h>
-
-int apic_mapped;
-int apic_verbosity;
-int apic_runs_main_timer;
-int apic_calibrate_pmtmr __initdata;
-
-int disable_apic_timer __initdata;
-
-/* Local APIC timer works in C2? */
-int local_apic_timer_c2_ok;
-EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok);
-
-static struct resource *ioapic_resources;
-static struct resource lapic_resource = {
-	.name = "Local APIC",
-	.flags = IORESOURCE_MEM | IORESOURCE_BUSY,
-};
-
-/*
- * cpu_mask that denotes the CPUs that needs timer interrupt coming in as
- * IPIs in place of local APIC timers
- */
-static cpumask_t timer_interrupt_broadcast_ipi_mask;
-
-/* Using APIC to generate smp_local_timer_interrupt? */
-int using_apic_timer __read_mostly = 0;
-
-static void apic_pm_activate(void);
-
-void apic_wait_icr_idle(void)
-{
-	while (apic_read(APIC_ICR) & APIC_ICR_BUSY)
-		cpu_relax();
-}
-
-unsigned int safe_apic_wait_icr_idle(void)
-{
-	unsigned int send_status;
-	int timeout;
-
-	timeout = 0;
-	do {
-		send_status = apic_read(APIC_ICR) & APIC_ICR_BUSY;
-		if (!send_status)
-			break;
-		udelay(100);
-	} while (timeout++ < 1000);
-
-	return send_status;
-}
-
-void enable_NMI_through_LVT0 (void * dummy)
-{
-	unsigned int v;
-
-	/* unmask and set to NMI */
-	v = APIC_DM_NMI;
-	apic_write(APIC_LVT0, v);
-}
-
-int get_maxlvt(void)
-{
-	unsigned int v, maxlvt;
-
-	v = apic_read(APIC_LVR);
-	maxlvt = GET_APIC_MAXLVT(v);
-	return maxlvt;
-}
-
-/*
- * 'what should we do if we get a hw irq event on an illegal vector'.
- * each architecture has to answer this themselves.
- */
-void ack_bad_irq(unsigned int irq)
-{
-	printk("unexpected IRQ trap at vector %02x\n", irq);
-	/*
-	 * Currently unexpected vectors happen only on SMP and APIC.
-	 * We _must_ ack these because every local APIC has only N
-	 * irq slots per priority level, and a 'hanging, unacked' IRQ
-	 * holds up an irq slot - in excessive cases (when multiple
-	 * unexpected vectors occur) that might lock up the APIC
-	 * completely.
-	 * But don't ack when the APIC is disabled. -AK
-	 */
-	if (!disable_apic)
-		ack_APIC_irq();
-}
-
-void clear_local_APIC(void)
-{
-	int maxlvt;
-	unsigned int v;
-
-	maxlvt = get_maxlvt();
-
-	/*
-	 * Masking an LVT entry can trigger a local APIC error
-	 * if the vector is zero. Mask LVTERR first to prevent this.
-	 */
-	if (maxlvt >= 3) {
-		v = ERROR_APIC_VECTOR; /* any non-zero vector will do */
-		apic_write(APIC_LVTERR, v | APIC_LVT_MASKED);
-	}
-	/*
-	 * Careful: we have to set masks only first to deassert
-	 * any level-triggered sources.
-	 */
-	v = apic_read(APIC_LVTT);
-	apic_write(APIC_LVTT, v | APIC_LVT_MASKED);
-	v = apic_read(APIC_LVT0);
-	apic_write(APIC_LVT0, v | APIC_LVT_MASKED);
-	v = apic_read(APIC_LVT1);
-	apic_write(APIC_LVT1, v | APIC_LVT_MASKED);
-	if (maxlvt >= 4) {
-		v = apic_read(APIC_LVTPC);
-		apic_write(APIC_LVTPC, v | APIC_LVT_MASKED);
-	}
-
-	/*
-	 * Clean APIC state for other OSs:
-	 */
-	apic_write(APIC_LVTT, APIC_LVT_MASKED);
-	apic_write(APIC_LVT0, APIC_LVT_MASKED);
-	apic_write(APIC_LVT1, APIC_LVT_MASKED);
-	if (maxlvt >= 3)
-		apic_write(APIC_LVTERR, APIC_LVT_MASKED);
-	if (maxlvt >= 4)
-		apic_write(APIC_LVTPC, APIC_LVT_MASKED);
-	apic_write(APIC_ESR, 0);
-	apic_read(APIC_ESR);
-}
-
-void disconnect_bsp_APIC(int virt_wire_setup)
-{
-	/* Go back to Virtual Wire compatibility mode */
-	unsigned long value;
-
-	/* For the spurious interrupt use vector F, and enable it */
-	value = apic_read(APIC_SPIV);
-	value &= ~APIC_VECTOR_MASK;
-	value |= APIC_SPIV_APIC_ENABLED;
-	value |= 0xf;
-	apic_write(APIC_SPIV, value);
-
-	if (!virt_wire_setup) {
-		/* For LVT0 make it edge triggered, active high, external and enabled */
-		value = apic_read(APIC_LVT0);
-		value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING |
-			APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
-			APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED );
-		value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
-		value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT);
-		apic_write(APIC_LVT0, value);
-	} else {
-		/* Disable LVT0 */
-		apic_write(APIC_LVT0, APIC_LVT_MASKED);
-	}
-
-	/* For LVT1 make it edge triggered, active high, nmi and enabled */
-	value = apic_read(APIC_LVT1);
-	value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING |
-			APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
-			APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED);
-	value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
-	value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI);
-	apic_write(APIC_LVT1, value);
-}
-
-void disable_local_APIC(void)
-{
-	unsigned int value;
-
-	clear_local_APIC();
-
-	/*
-	 * Disable APIC (implies clearing of registers
-	 * for 82489DX!).
-	 */
-	value = apic_read(APIC_SPIV);
-	value &= ~APIC_SPIV_APIC_ENABLED;
-	apic_write(APIC_SPIV, value);
-}
-
-/*
- * This is to verify that we're looking at a real local APIC.
- * Check these against your board if the CPUs aren't getting
- * started for no apparent reason.
- */
-int __init verify_local_APIC(void)
-{
-	unsigned int reg0, reg1;
-
-	/*
-	 * The version register is read-only in a real APIC.
-	 */
-	reg0 = apic_read(APIC_LVR);
-	apic_printk(APIC_DEBUG, "Getting VERSION: %x\n", reg0);
-	apic_write(APIC_LVR, reg0 ^ APIC_LVR_MASK);
-	reg1 = apic_read(APIC_LVR);
-	apic_printk(APIC_DEBUG, "Getting VERSION: %x\n", reg1);
-
-	/*
-	 * The two version reads above should print the same
-	 * numbers.  If the second one is different, then we
-	 * poke at a non-APIC.
-	 */
-	if (reg1 != reg0)
-		return 0;
-
-	/*
-	 * Check if the version looks reasonably.
-	 */
-	reg1 = GET_APIC_VERSION(reg0);
-	if (reg1 == 0x00 || reg1 == 0xff)
-		return 0;
-	reg1 = get_maxlvt();
-	if (reg1 < 0x02 || reg1 == 0xff)
-		return 0;
-
-	/*
-	 * The ID register is read/write in a real APIC.
-	 */
-	reg0 = apic_read(APIC_ID);
-	apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg0);
-	apic_write(APIC_ID, reg0 ^ APIC_ID_MASK);
-	reg1 = apic_read(APIC_ID);
-	apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg1);
-	apic_write(APIC_ID, reg0);
-	if (reg1 != (reg0 ^ APIC_ID_MASK))
-		return 0;
-
-	/*
-	 * The next two are just to see if we have sane values.
-	 * They're only really relevant if we're in Virtual Wire
-	 * compatibility mode, but most boxes are anymore.
-	 */
-	reg0 = apic_read(APIC_LVT0);
-	apic_printk(APIC_DEBUG,"Getting LVT0: %x\n", reg0);
-	reg1 = apic_read(APIC_LVT1);
-	apic_printk(APIC_DEBUG, "Getting LVT1: %x\n", reg1);
-
-	return 1;
-}
-
-void __init sync_Arb_IDs(void)
-{
-	/* Unsupported on P4 - see Intel Dev. Manual Vol. 3, Ch. 8.6.1 */
-	unsigned int ver = GET_APIC_VERSION(apic_read(APIC_LVR));
-	if (ver >= 0x14)	/* P4 or higher */
-		return;
-
-	/*
-	 * Wait for idle.
-	 */
-	apic_wait_icr_idle();
-
-	apic_printk(APIC_DEBUG, "Synchronizing Arb IDs.\n");
-	apic_write(APIC_ICR, APIC_DEST_ALLINC | APIC_INT_LEVELTRIG
-				| APIC_DM_INIT);
-}
-
-/*
- * An initial setup of the virtual wire mode.
- */
-void __init init_bsp_APIC(void)
-{
-	unsigned int value;
-
-	/*
-	 * Don't do the setup now if we have a SMP BIOS as the
-	 * through-I/O-APIC virtual wire mode might be active.
-	 */
-	if (smp_found_config || !cpu_has_apic)
-		return;
-
-	value = apic_read(APIC_LVR);
-
-	/*
-	 * Do not trust the local APIC being empty at bootup.
-	 */
-	clear_local_APIC();
-
-	/*
-	 * Enable APIC.
-	 */
-	value = apic_read(APIC_SPIV);
-	value &= ~APIC_VECTOR_MASK;
-	value |= APIC_SPIV_APIC_ENABLED;
-	value |= APIC_SPIV_FOCUS_DISABLED;
-	value |= SPURIOUS_APIC_VECTOR;
-	apic_write(APIC_SPIV, value);
-
-	/*
-	 * Set up the virtual wire mode.
-	 */
-	apic_write(APIC_LVT0, APIC_DM_EXTINT);
-	value = APIC_DM_NMI;
-	apic_write(APIC_LVT1, value);
-}
-
-void __cpuinit setup_local_APIC (void)
-{
-	unsigned int value, maxlvt;
-	int i, j;
-
-	value = apic_read(APIC_LVR);
-
-	BUILD_BUG_ON((SPURIOUS_APIC_VECTOR & 0x0f) != 0x0f);
-
-	/*
-	 * Double-check whether this APIC is really registered.
-	 * This is meaningless in clustered apic mode, so we skip it.
-	 */
-	if (!apic_id_registered())
-		BUG();
-
-	/*
-	 * Intel recommends to set DFR, LDR and TPR before enabling
-	 * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
-	 * document number 292116).  So here it goes...
-	 */
-	init_apic_ldr();
-
-	/*
-	 * Set Task Priority to 'accept all'. We never change this
-	 * later on.
-	 */
-	value = apic_read(APIC_TASKPRI);
-	value &= ~APIC_TPRI_MASK;
-	apic_write(APIC_TASKPRI, value);
-
-	/*
-	 * After a crash, we no longer service the interrupts and a pending
-	 * interrupt from previous kernel might still have ISR bit set.
-	 *
-	 * Most probably by now CPU has serviced that pending interrupt and
-	 * it might not have done the ack_APIC_irq() because it thought,
-	 * interrupt came from i8259 as ExtInt. LAPIC did not get EOI so it
-	 * does not clear the ISR bit and cpu thinks it has already serivced
-	 * the interrupt. Hence a vector might get locked. It was noticed
-	 * for timer irq (vector 0x31). Issue an extra EOI to clear ISR.
-	 */
-	for (i = APIC_ISR_NR - 1; i >= 0; i--) {
-		value = apic_read(APIC_ISR + i*0x10);
-		for (j = 31; j >= 0; j--) {
-			if (value & (1<<j))
-				ack_APIC_irq();
-		}
-	}
-
-	/*
-	 * Now that we are all set up, enable the APIC
-	 */
-	value = apic_read(APIC_SPIV);
-	value &= ~APIC_VECTOR_MASK;
-	/*
-	 * Enable APIC
-	 */
-	value |= APIC_SPIV_APIC_ENABLED;
-
-	/* We always use processor focus */
-
-	/*
-	 * Set spurious IRQ vector
-	 */
-	value |= SPURIOUS_APIC_VECTOR;
-	apic_write(APIC_SPIV, value);
-
-	/*
-	 * Set up LVT0, LVT1:
-	 *
-	 * set up through-local-APIC on the BP's LINT0. This is not
-	 * strictly necessary in pure symmetric-IO mode, but sometimes
-	 * we delegate interrupts to the 8259A.
-	 */
-	/*
-	 * TODO: set up through-local-APIC from through-I/O-APIC? --macro
-	 */
-	value = apic_read(APIC_LVT0) & APIC_LVT_MASKED;
-	if (!smp_processor_id() && !value) {
-		value = APIC_DM_EXTINT;
-		apic_printk(APIC_VERBOSE, "enabled ExtINT on CPU#%d\n", smp_processor_id());
-	} else {
-		value = APIC_DM_EXTINT | APIC_LVT_MASKED;
-		apic_printk(APIC_VERBOSE, "masked ExtINT on CPU#%d\n", smp_processor_id());
-	}
-	apic_write(APIC_LVT0, value);
-
-	/*
-	 * only the BP should see the LINT1 NMI signal, obviously.
-	 */
-	if (!smp_processor_id())
-		value = APIC_DM_NMI;
-	else
-		value = APIC_DM_NMI | APIC_LVT_MASKED;
-	apic_write(APIC_LVT1, value);
-
-	{
-		unsigned oldvalue;
-		maxlvt = get_maxlvt();
-		oldvalue = apic_read(APIC_ESR);
-		value = ERROR_APIC_VECTOR;      // enables sending errors
-		apic_write(APIC_LVTERR, value);
-		/*
-		 * spec says clear errors after enabling vector.
-		 */
-		if (maxlvt > 3)
-			apic_write(APIC_ESR, 0);
-		value = apic_read(APIC_ESR);
-		if (value != oldvalue)
-			apic_printk(APIC_VERBOSE,
-			"ESR value after enabling vector: %08x, after %08x\n",
-			oldvalue, value);
-	}
-
-	nmi_watchdog_default();
-	setup_apic_nmi_watchdog(NULL);
-	apic_pm_activate();
-}
-
-#ifdef CONFIG_PM
-
-static struct {
-	/* 'active' is true if the local APIC was enabled by us and
-	   not the BIOS; this signifies that we are also responsible
-	   for disabling it before entering apm/acpi suspend */
-	int active;
-	/* r/w apic fields */
-	unsigned int apic_id;
-	unsigned int apic_taskpri;
-	unsigned int apic_ldr;
-	unsigned int apic_dfr;
-	unsigned int apic_spiv;
-	unsigned int apic_lvtt;
-	unsigned int apic_lvtpc;
-	unsigned int apic_lvt0;
-	unsigned int apic_lvt1;
-	unsigned int apic_lvterr;
-	unsigned int apic_tmict;
-	unsigned int apic_tdcr;
-	unsigned int apic_thmr;
-} apic_pm_state;
-
-static int lapic_suspend(struct sys_device *dev, pm_message_t state)
-{
-	unsigned long flags;
-	int maxlvt;
-
-	if (!apic_pm_state.active)
-		return 0;
-
-	maxlvt = get_maxlvt();
-
-	apic_pm_state.apic_id = apic_read(APIC_ID);
-	apic_pm_state.apic_taskpri = apic_read(APIC_TASKPRI);
-	apic_pm_state.apic_ldr = apic_read(APIC_LDR);
-	apic_pm_state.apic_dfr = apic_read(APIC_DFR);
-	apic_pm_state.apic_spiv = apic_read(APIC_SPIV);
-	apic_pm_state.apic_lvtt = apic_read(APIC_LVTT);
-	if (maxlvt >= 4)
-		apic_pm_state.apic_lvtpc = apic_read(APIC_LVTPC);
-	apic_pm_state.apic_lvt0 = apic_read(APIC_LVT0);
-	apic_pm_state.apic_lvt1 = apic_read(APIC_LVT1);
-	apic_pm_state.apic_lvterr = apic_read(APIC_LVTERR);
-	apic_pm_state.apic_tmict = apic_read(APIC_TMICT);
-	apic_pm_state.apic_tdcr = apic_read(APIC_TDCR);
-#ifdef CONFIG_X86_MCE_INTEL
-	if (maxlvt >= 5)
-		apic_pm_state.apic_thmr = apic_read(APIC_LVTTHMR);
-#endif
-	local_irq_save(flags);
-	disable_local_APIC();
-	local_irq_restore(flags);
-	return 0;
-}
-
-static int lapic_resume(struct sys_device *dev)
-{
-	unsigned int l, h;
-	unsigned long flags;
-	int maxlvt;
-
-	if (!apic_pm_state.active)
-		return 0;
-
-	maxlvt = get_maxlvt();
-
-	local_irq_save(flags);
-	rdmsr(MSR_IA32_APICBASE, l, h);
-	l &= ~MSR_IA32_APICBASE_BASE;
-	l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr;
-	wrmsr(MSR_IA32_APICBASE, l, h);
-	apic_write(APIC_LVTERR, ERROR_APIC_VECTOR | APIC_LVT_MASKED);
-	apic_write(APIC_ID, apic_pm_state.apic_id);
-	apic_write(APIC_DFR, apic_pm_state.apic_dfr);
-	apic_write(APIC_LDR, apic_pm_state.apic_ldr);
-	apic_write(APIC_TASKPRI, apic_pm_state.apic_taskpri);
-	apic_write(APIC_SPIV, apic_pm_state.apic_spiv);
-	apic_write(APIC_LVT0, apic_pm_state.apic_lvt0);
-	apic_write(APIC_LVT1, apic_pm_state.apic_lvt1);
-#ifdef CONFIG_X86_MCE_INTEL
-	if (maxlvt >= 5)
-		apic_write(APIC_LVTTHMR, apic_pm_state.apic_thmr);
-#endif
-	if (maxlvt >= 4)
-		apic_write(APIC_LVTPC, apic_pm_state.apic_lvtpc);
-	apic_write(APIC_LVTT, apic_pm_state.apic_lvtt);
-	apic_write(APIC_TDCR, apic_pm_state.apic_tdcr);
-	apic_write(APIC_TMICT, apic_pm_state.apic_tmict);
-	apic_write(APIC_ESR, 0);
-	apic_read(APIC_ESR);
-	apic_write(APIC_LVTERR, apic_pm_state.apic_lvterr);
-	apic_write(APIC_ESR, 0);
-	apic_read(APIC_ESR);
-	local_irq_restore(flags);
-	return 0;
-}
-
-static struct sysdev_class lapic_sysclass = {
-	set_kset_name("lapic"),
-	.resume		= lapic_resume,
-	.suspend	= lapic_suspend,
-};
-
-static struct sys_device device_lapic = {
-	.id		= 0,
-	.cls		= &lapic_sysclass,
-};
-
-static void __cpuinit apic_pm_activate(void)
-{
-	apic_pm_state.active = 1;
-}
-
-static int __init init_lapic_sysfs(void)
-{
-	int error;
-	if (!cpu_has_apic)
-		return 0;
-	/* XXX: remove suspend/resume procs if !apic_pm_state.active? */
-	error = sysdev_class_register(&lapic_sysclass);
-	if (!error)
-		error = sysdev_register(&device_lapic);
-	return error;
-}
-device_initcall(init_lapic_sysfs);
-
-#else	/* CONFIG_PM */
-
-static void apic_pm_activate(void) { }
-
-#endif	/* CONFIG_PM */
-
-static int __init apic_set_verbosity(char *str)
-{
-	if (str == NULL)  {
-		skip_ioapic_setup = 0;
-		ioapic_force = 1;
-		return 0;
-	}
-	if (strcmp("debug", str) == 0)
-		apic_verbosity = APIC_DEBUG;
-	else if (strcmp("verbose", str) == 0)
-		apic_verbosity = APIC_VERBOSE;
-	else {
-		printk(KERN_WARNING "APIC Verbosity level %s not recognised"
-				" use apic=verbose or apic=debug\n", str);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-early_param("apic", apic_set_verbosity);
-
-/*
- * Detect and enable local APICs on non-SMP boards.
- * Original code written by Keir Fraser.
- * On AMD64 we trust the BIOS - if it says no APIC it is likely
- * not correctly set up (usually the APIC timer won't work etc.)
- */
-
-static int __init detect_init_APIC (void)
-{
-	if (!cpu_has_apic) {
-		printk(KERN_INFO "No local APIC present\n");
-		return -1;
-	}
-
-	mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
-	boot_cpu_id = 0;
-	return 0;
-}
-
-#ifdef CONFIG_X86_IO_APIC
-static struct resource * __init ioapic_setup_resources(void)
-{
-#define IOAPIC_RESOURCE_NAME_SIZE 11
-	unsigned long n;
-	struct resource *res;
-	char *mem;
-	int i;
-
-	if (nr_ioapics <= 0)
-		return NULL;
-
-	n = IOAPIC_RESOURCE_NAME_SIZE + sizeof(struct resource);
-	n *= nr_ioapics;
-
-	mem = alloc_bootmem(n);
-	res = (void *)mem;
-
-	if (mem != NULL) {
-		memset(mem, 0, n);
-		mem += sizeof(struct resource) * nr_ioapics;
-
-		for (i = 0; i < nr_ioapics; i++) {
-			res[i].name = mem;
-			res[i].flags = IORESOURCE_MEM | IORESOURCE_BUSY;
-			sprintf(mem,  "IOAPIC %u", i);
-			mem += IOAPIC_RESOURCE_NAME_SIZE;
-		}
-	}
-
-	ioapic_resources = res;
-
-	return res;
-}
-
-static int __init ioapic_insert_resources(void)
-{
-	int i;
-	struct resource *r = ioapic_resources;
-
-	if (!r) {
-		printk("IO APIC resources could be not be allocated.\n");
-		return -1;
-	}
-
-	for (i = 0; i < nr_ioapics; i++) {
-		insert_resource(&iomem_resource, r);
-		r++;
-	}
-
-	return 0;
-}
-
-/* Insert the IO APIC resources after PCI initialization has occured to handle
- * IO APICS that are mapped in on a BAR in PCI space. */
-late_initcall(ioapic_insert_resources);
-#endif
-
-void __init init_apic_mappings(void)
-{
-	unsigned long apic_phys;
-
-	/*
-	 * If no local APIC can be found then set up a fake all
-	 * zeroes page to simulate the local APIC and another
-	 * one for the IO-APIC.
-	 */
-	if (!smp_found_config && detect_init_APIC()) {
-		apic_phys = (unsigned long) alloc_bootmem_pages(PAGE_SIZE);
-		apic_phys = __pa(apic_phys);
-	} else
-		apic_phys = mp_lapic_addr;
-
-	set_fixmap_nocache(FIX_APIC_BASE, apic_phys);
-	apic_mapped = 1;
-	apic_printk(APIC_VERBOSE,"mapped APIC to %16lx (%16lx)\n", APIC_BASE, apic_phys);
-
-	/* Put local APIC into the resource map. */
-	lapic_resource.start = apic_phys;
-	lapic_resource.end = lapic_resource.start + PAGE_SIZE - 1;
-	insert_resource(&iomem_resource, &lapic_resource);
-
-	/*
-	 * Fetch the APIC ID of the BSP in case we have a
-	 * default configuration (or the MP table is broken).
-	 */
-	boot_cpu_id = GET_APIC_ID(apic_read(APIC_ID));
-
-	{
-		unsigned long ioapic_phys, idx = FIX_IO_APIC_BASE_0;
-		int i;
-		struct resource *ioapic_res;
-
-		ioapic_res = ioapic_setup_resources();
-		for (i = 0; i < nr_ioapics; i++) {
-			if (smp_found_config) {
-				ioapic_phys = mp_ioapics[i].mpc_apicaddr;
-			} else {
-				ioapic_phys = (unsigned long) alloc_bootmem_pages(PAGE_SIZE);
-				ioapic_phys = __pa(ioapic_phys);
-			}
-			set_fixmap_nocache(idx, ioapic_phys);
-			apic_printk(APIC_VERBOSE,"mapped IOAPIC to %016lx (%016lx)\n",
-					__fix_to_virt(idx), ioapic_phys);
-			idx++;
-
-			if (ioapic_res != NULL) {
-				ioapic_res->start = ioapic_phys;
-				ioapic_res->end = ioapic_phys + (4 * 1024) - 1;
-				ioapic_res++;
-			}
-		}
-	}
-}
-
-/*
- * This function sets up the local APIC timer, with a timeout of
- * 'clocks' APIC bus clock. During calibration we actually call
- * this function twice on the boot CPU, once with a bogus timeout
- * value, second time for real. The other (noncalibrating) CPUs
- * call this function only once, with the real, calibrated value.
- *
- * We do reads before writes even if unnecessary, to get around the
- * P5 APIC double write bug.
- */
-
-#define APIC_DIVISOR 16
-
-static void __setup_APIC_LVTT(unsigned int clocks)
-{
-	unsigned int lvtt_value, tmp_value;
-	int cpu = smp_processor_id();
-
-	lvtt_value = APIC_LVT_TIMER_PERIODIC | LOCAL_TIMER_VECTOR;
-
-	if (cpu_isset(cpu, timer_interrupt_broadcast_ipi_mask))
-		lvtt_value |= APIC_LVT_MASKED;
-
-	apic_write(APIC_LVTT, lvtt_value);
-
-	/*
-	 * Divide PICLK by 16
-	 */
-	tmp_value = apic_read(APIC_TDCR);
-	apic_write(APIC_TDCR, (tmp_value
-				& ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE))
-				| APIC_TDR_DIV_16);
-
-	apic_write(APIC_TMICT, clocks/APIC_DIVISOR);
-}
-
-static void setup_APIC_timer(unsigned int clocks)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	/* wait for irq slice */
-	if (hpet_address && hpet_use_timer) {
-		u32 trigger = hpet_readl(HPET_T0_CMP);
-		while (hpet_readl(HPET_T0_CMP) == trigger)
-			/* do nothing */ ;
-	} else {
-		int c1, c2;
-		outb_p(0x00, 0x43);
-		c2 = inb_p(0x40);
-		c2 |= inb_p(0x40) << 8;
-		do {
-			c1 = c2;
-			outb_p(0x00, 0x43);
-			c2 = inb_p(0x40);
-			c2 |= inb_p(0x40) << 8;
-		} while (c2 - c1 < 300);
-	}
-	__setup_APIC_LVTT(clocks);
-	/* Turn off PIT interrupt if we use APIC timer as main timer.
-	   Only works with the PM timer right now
-	   TBD fix it for HPET too. */
-	if ((pmtmr_ioport != 0) &&
-		smp_processor_id() == boot_cpu_id &&
-		apic_runs_main_timer == 1 &&
-		!cpu_isset(boot_cpu_id, timer_interrupt_broadcast_ipi_mask)) {
-		stop_timer_interrupt();
-		apic_runs_main_timer++;
-	}
-	local_irq_restore(flags);
-}
-
-/*
- * In this function we calibrate APIC bus clocks to the external
- * timer. Unfortunately we cannot use jiffies and the timer irq
- * to calibrate, since some later bootup code depends on getting
- * the first irq? Ugh.
- *
- * We want to do the calibration only once since we
- * want to have local timer irqs syncron. CPUs connected
- * by the same APIC bus have the very same bus frequency.
- * And we want to have irqs off anyways, no accidental
- * APIC irq that way.
- */
-
-#define TICK_COUNT 100000000
-
-static int __init calibrate_APIC_clock(void)
-{
-	unsigned apic, apic_start;
-	unsigned long tsc, tsc_start;
-	int result;
-	/*
-	 * Put whatever arbitrary (but long enough) timeout
-	 * value into the APIC clock, we just want to get the
-	 * counter running for calibration.
-	 */
-	__setup_APIC_LVTT(4000000000);
-
-	apic_start = apic_read(APIC_TMCCT);
-#ifdef CONFIG_X86_PM_TIMER
-	if (apic_calibrate_pmtmr && pmtmr_ioport) {
-		pmtimer_wait(5000);  /* 5ms wait */
-		apic = apic_read(APIC_TMCCT);
-		result = (apic_start - apic) * 1000L / 5;
-	} else
-#endif
-	{
-		rdtscll(tsc_start);
-
-		do {
-			apic = apic_read(APIC_TMCCT);
-			rdtscll(tsc);
-		} while ((tsc - tsc_start) < TICK_COUNT &&
-				(apic_start - apic) < TICK_COUNT);
-
-		result = (apic_start - apic) * 1000L * tsc_khz /
-					(tsc - tsc_start);
-	}
-	printk("result %d\n", result);
-
-
-	printk(KERN_INFO "Detected %d.%03d MHz APIC timer.\n",
-		result / 1000 / 1000, result / 1000 % 1000);
-
-	return result * APIC_DIVISOR / HZ;
-}
-
-static unsigned int calibration_result;
-
-void __init setup_boot_APIC_clock (void)
-{
-	if (disable_apic_timer) {
-		printk(KERN_INFO "Disabling APIC timer\n");
-		return;
-	}
-
-	printk(KERN_INFO "Using local APIC timer interrupts.\n");
-	using_apic_timer = 1;
-
-	local_irq_disable();
-
-	calibration_result = calibrate_APIC_clock();
-	/*
-	 * Now set up the timer for real.
-	 */
-	setup_APIC_timer(calibration_result);
-
-	local_irq_enable();
-}
-
-void __cpuinit setup_secondary_APIC_clock(void)
-{
-	local_irq_disable(); /* FIXME: Do we need this? --RR */
-	setup_APIC_timer(calibration_result);
-	local_irq_enable();
-}
-
-void disable_APIC_timer(void)
-{
-	if (using_apic_timer) {
-		unsigned long v;
-
-		v = apic_read(APIC_LVTT);
-		/*
-		 * When an illegal vector value (0-15) is written to an LVT
-		 * entry and delivery mode is Fixed, the APIC may signal an
-		 * illegal vector error, with out regard to whether the mask
-		 * bit is set or whether an interrupt is actually seen on input.
-		 *
-		 * Boot sequence might call this function when the LVTT has
-		 * '0' vector value. So make sure vector field is set to
-		 * valid value.
-		 */
-		v |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR);
-		apic_write(APIC_LVTT, v);
-	}
-}
-
-void enable_APIC_timer(void)
-{
-	int cpu = smp_processor_id();
-
-	if (using_apic_timer &&
-	    !cpu_isset(cpu, timer_interrupt_broadcast_ipi_mask)) {
-		unsigned long v;
-
-		v = apic_read(APIC_LVTT);
-		apic_write(APIC_LVTT, v & ~APIC_LVT_MASKED);
-	}
-}
-
-void switch_APIC_timer_to_ipi(void *cpumask)
-{
-	cpumask_t mask = *(cpumask_t *)cpumask;
-	int cpu = smp_processor_id();
-
-	if (cpu_isset(cpu, mask) &&
-	    !cpu_isset(cpu, timer_interrupt_broadcast_ipi_mask)) {
-		disable_APIC_timer();
-		cpu_set(cpu, timer_interrupt_broadcast_ipi_mask);
-	}
-}
-EXPORT_SYMBOL(switch_APIC_timer_to_ipi);
-
-void smp_send_timer_broadcast_ipi(void)
-{
-	int cpu = smp_processor_id();
-	cpumask_t mask;
-
-	cpus_and(mask, cpu_online_map, timer_interrupt_broadcast_ipi_mask);
-
-	if (cpu_isset(cpu, mask)) {
-		cpu_clear(cpu, mask);
-		add_pda(apic_timer_irqs, 1);
-		smp_local_timer_interrupt();
-	}
-
-	if (!cpus_empty(mask)) {
-		send_IPI_mask(mask, LOCAL_TIMER_VECTOR);
-	}
-}
-
-void switch_ipi_to_APIC_timer(void *cpumask)
-{
-	cpumask_t mask = *(cpumask_t *)cpumask;
-	int cpu = smp_processor_id();
-
-	if (cpu_isset(cpu, mask) &&
-	    cpu_isset(cpu, timer_interrupt_broadcast_ipi_mask)) {
-		cpu_clear(cpu, timer_interrupt_broadcast_ipi_mask);
-		enable_APIC_timer();
-	}
-}
-EXPORT_SYMBOL(switch_ipi_to_APIC_timer);
-
-int setup_profiling_timer(unsigned int multiplier)
-{
-	return -EINVAL;
-}
-
-void setup_APIC_extended_lvt(unsigned char lvt_off, unsigned char vector,
-			     unsigned char msg_type, unsigned char mask)
-{
-	unsigned long reg = (lvt_off << 4) + K8_APIC_EXT_LVT_BASE;
-	unsigned int  v   = (mask << 16) | (msg_type << 8) | vector;
-	apic_write(reg, v);
-}
-
-#undef APIC_DIVISOR
-
-/*
- * Local timer interrupt handler. It does both profiling and
- * process statistics/rescheduling.
- *
- * We do profiling in every local tick, statistics/rescheduling
- * happen only every 'profiling multiplier' ticks. The default
- * multiplier is 1 and it can be changed by writing the new multiplier
- * value into /proc/profile.
- */
-
-void smp_local_timer_interrupt(void)
-{
-	profile_tick(CPU_PROFILING);
-#ifdef CONFIG_SMP
-	update_process_times(user_mode(get_irq_regs()));
-#endif
-	if (apic_runs_main_timer > 1 && smp_processor_id() == boot_cpu_id)
-		main_timer_handler();
-	/*
-	 * We take the 'long' return path, and there every subsystem
-	 * grabs the appropriate locks (kernel lock/ irq lock).
-	 *
-	 * We might want to decouple profiling from the 'long path',
-	 * and do the profiling totally in assembly.
-	 *
-	 * Currently this isn't too much of an issue (performance wise),
-	 * we can take more than 100K local irqs per second on a 100 MHz P5.
-	 */
-}
-
-/*
- * Local APIC timer interrupt. This is the most natural way for doing
- * local interrupts, but local timer interrupts can be emulated by
- * broadcast interrupts too. [in case the hw doesn't support APIC timers]
- *
- * [ if a single-CPU system runs an SMP kernel then we call the local
- *   interrupt as well. Thus we cannot inline the local irq ... ]
- */
-void smp_apic_timer_interrupt(struct pt_regs *regs)
-{
-	struct pt_regs *old_regs = set_irq_regs(regs);
-
-	/*
-	 * the NMI deadlock-detector uses this.
-	 */
-	add_pda(apic_timer_irqs, 1);
-
-	/*
-	 * NOTE! We'd better ACK the irq immediately,
-	 * because timer handling can be slow.
-	 */
-	ack_APIC_irq();
-	/*
-	 * update_process_times() expects us to have done irq_enter().
-	 * Besides, if we don't timer interrupts ignore the global
-	 * interrupt lock, which is the WrongThing (tm) to do.
-	 */
-	exit_idle();
-	irq_enter();
-	smp_local_timer_interrupt();
-	irq_exit();
-	set_irq_regs(old_regs);
-}
-
-/*
- * apic_is_clustered_box() -- Check if we can expect good TSC
- *
- * Thus far, the major user of this is IBM's Summit2 series:
- *
- * Clustered boxes may have unsynced TSC problems if they are
- * multi-chassis. Use available data to take a good guess.
- * If in doubt, go HPET.
- */
-__cpuinit int apic_is_clustered_box(void)
-{
-	int i, clusters, zeros;
-	unsigned id;
-	DECLARE_BITMAP(clustermap, NUM_APIC_CLUSTERS);
-
-	bitmap_zero(clustermap, NUM_APIC_CLUSTERS);
-
-	for (i = 0; i < NR_CPUS; i++) {
-		id = bios_cpu_apicid[i];
-		if (id != BAD_APICID)
-			__set_bit(APIC_CLUSTERID(id), clustermap);
-	}
-
-	/* Problem:  Partially populated chassis may not have CPUs in some of
-	 * the APIC clusters they have been allocated.  Only present CPUs have
-	 * bios_cpu_apicid entries, thus causing zeroes in the bitmap.  Since
-	 * clusters are allocated sequentially, count zeros only if they are
-	 * bounded by ones.
-	 */
-	clusters = 0;
-	zeros = 0;
-	for (i = 0; i < NUM_APIC_CLUSTERS; i++) {
-		if (test_bit(i, clustermap)) {
-			clusters += 1 + zeros;
-			zeros = 0;
-		} else
-			++zeros;
-	}
-
-	/*
-	 * If clusters > 2, then should be multi-chassis.
-	 * May have to revisit this when multi-core + hyperthreaded CPUs come
-	 * out, but AFAIK this will work even for them.
-	 */
-	return (clusters > 2);
-}
-
-/*
- * This interrupt should _never_ happen with our APIC/SMP architecture
- */
-asmlinkage void smp_spurious_interrupt(void)
-{
-	unsigned int v;
-	exit_idle();
-	irq_enter();
-	/*
-	 * Check if this really is a spurious interrupt and ACK it
-	 * if it is a vectored one.  Just in case...
-	 * Spurious interrupts should not be ACKed.
-	 */
-	v = apic_read(APIC_ISR + ((SPURIOUS_APIC_VECTOR & ~0x1f) >> 1));
-	if (v & (1 << (SPURIOUS_APIC_VECTOR & 0x1f)))
-		ack_APIC_irq();
-
-	irq_exit();
-}
-
-/*
- * This interrupt should never happen with our APIC/SMP architecture
- */
-
-asmlinkage void smp_error_interrupt(void)
-{
-	unsigned int v, v1;
-
-	exit_idle();
-	irq_enter();
-	/* First tickle the hardware, only then report what went on. -- REW */
-	v = apic_read(APIC_ESR);
-	apic_write(APIC_ESR, 0);
-	v1 = apic_read(APIC_ESR);
-	ack_APIC_irq();
-	atomic_inc(&irq_err_count);
-
-	/* Here is what the APIC error bits mean:
-	   0: Send CS error
-	   1: Receive CS error
-	   2: Send accept error
-	   3: Receive accept error
-	   4: Reserved
-	   5: Send illegal vector
-	   6: Received illegal vector
-	   7: Illegal register address
-	*/
-	printk (KERN_DEBUG "APIC error on CPU%d: %02x(%02x)\n",
-		smp_processor_id(), v , v1);
-	irq_exit();
-}
-
-int disable_apic;
-
-/*
- * This initializes the IO-APIC and APIC hardware if this is
- * a UP kernel.
- */
-int __init APIC_init_uniprocessor (void)
-{
-	if (disable_apic) {
-		printk(KERN_INFO "Apic disabled\n");
-		return -1;
-	}
-	if (!cpu_has_apic) {
-		disable_apic = 1;
-		printk(KERN_INFO "Apic disabled by BIOS\n");
-		return -1;
-	}
-
-	verify_local_APIC();
-
-	phys_cpu_present_map = physid_mask_of_physid(boot_cpu_id);
-	apic_write(APIC_ID, SET_APIC_ID(boot_cpu_id));
-
-	setup_local_APIC();
-
-	if (smp_found_config && !skip_ioapic_setup && nr_ioapics)
-		setup_IO_APIC();
-	else
-		nr_ioapics = 0;
-	setup_boot_APIC_clock();
-	check_nmi_watchdog();
-	return 0;
-}
-
-static __init int setup_disableapic(char *str)
-{
-	disable_apic = 1;
-	clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability);
-	return 0;
-}
-early_param("disableapic", setup_disableapic);
-
-/* same as disableapic, for compatibility */
-static __init int setup_nolapic(char *str)
-{
-	return setup_disableapic(str);
-}
-early_param("nolapic", setup_nolapic);
-
-static int __init parse_lapic_timer_c2_ok(char *arg)
-{
-	local_apic_timer_c2_ok = 1;
-	return 0;
-}
-early_param("lapic_timer_c2_ok", parse_lapic_timer_c2_ok);
-
-static __init int setup_noapictimer(char *str)
-{
-	if (str[0] != ' ' && str[0] != 0)
-		return 0;
-	disable_apic_timer = 1;
-	return 1;
-}
-
-static __init int setup_apicmaintimer(char *str)
-{
-	apic_runs_main_timer = 1;
-	nohpet = 1;
-	return 1;
-}
-__setup("apicmaintimer", setup_apicmaintimer);
-
-static __init int setup_noapicmaintimer(char *str)
-{
-	apic_runs_main_timer = -1;
-	return 1;
-}
-__setup("noapicmaintimer", setup_noapicmaintimer);
-
-static __init int setup_apicpmtimer(char *s)
-{
-	apic_calibrate_pmtmr = 1;
-	notsc_setup(NULL);
-	return setup_apicmaintimer(NULL);
-}
-__setup("apicpmtimer", setup_apicpmtimer);
-
-__setup("noapictimer", setup_noapictimer);
-
diff --git a/arch/x86_64/kernel/asm-offsets.c b/arch/x86_64/kernel/asm-offsets.c
deleted file mode 100644
index cfa82c8..0000000
--- a/arch/x86_64/kernel/asm-offsets.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#ifdef CONFIG_X86_32
-# include "asm-offsets_32.c"
-#else
-# include "asm-offsets_64.c"
-#endif
diff --git a/arch/x86_64/kernel/asm-offsets_64.c b/arch/x86_64/kernel/asm-offsets_64.c
deleted file mode 100644
index 778953b..0000000
--- a/arch/x86_64/kernel/asm-offsets_64.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * Generate definitions needed by assembly language modules.
- * This code generates raw asm output which is post-processed to extract
- * and format the required data.
- */
-
-#include <linux/crypto.h>
-#include <linux/sched.h> 
-#include <linux/stddef.h>
-#include <linux/errno.h> 
-#include <linux/hardirq.h>
-#include <linux/suspend.h>
-#include <asm/pda.h>
-#include <asm/processor.h>
-#include <asm/segment.h>
-#include <asm/thread_info.h>
-#include <asm/ia32.h>
-
-#define DEFINE(sym, val) \
-        asm volatile("\n->" #sym " %0 " #val : : "i" (val))
-
-#define BLANK() asm volatile("\n->" : : )
-
-#define __NO_STUBS 1
-#undef __SYSCALL
-#undef _ASM_X86_64_UNISTD_H_
-#define __SYSCALL(nr, sym) [nr] = 1,
-static char syscalls[] = {
-#include <asm/unistd.h>
-};
-
-int main(void)
-{
-#define ENTRY(entry) DEFINE(tsk_ ## entry, offsetof(struct task_struct, entry))
-	ENTRY(state);
-	ENTRY(flags); 
-	ENTRY(thread); 
-	ENTRY(pid);
-	BLANK();
-#undef ENTRY
-#define ENTRY(entry) DEFINE(threadinfo_ ## entry, offsetof(struct thread_info, entry))
-	ENTRY(flags);
-	ENTRY(addr_limit);
-	ENTRY(preempt_count);
-	ENTRY(status);
-	BLANK();
-#undef ENTRY
-#define ENTRY(entry) DEFINE(pda_ ## entry, offsetof(struct x8664_pda, entry))
-	ENTRY(kernelstack); 
-	ENTRY(oldrsp); 
-	ENTRY(pcurrent); 
-	ENTRY(irqcount);
-	ENTRY(cpunumber);
-	ENTRY(irqstackptr);
-	ENTRY(data_offset);
-	BLANK();
-#undef ENTRY
-#ifdef CONFIG_IA32_EMULATION
-#define ENTRY(entry) DEFINE(IA32_SIGCONTEXT_ ## entry, offsetof(struct sigcontext_ia32, entry))
-	ENTRY(eax);
-	ENTRY(ebx);
-	ENTRY(ecx);
-	ENTRY(edx);
-	ENTRY(esi);
-	ENTRY(edi);
-	ENTRY(ebp);
-	ENTRY(esp);
-	ENTRY(eip);
-	BLANK();
-#undef ENTRY
-	DEFINE(IA32_RT_SIGFRAME_sigcontext,
-	       offsetof (struct rt_sigframe32, uc.uc_mcontext));
-	BLANK();
-#endif
-	DEFINE(pbe_address, offsetof(struct pbe, address));
-	DEFINE(pbe_orig_address, offsetof(struct pbe, orig_address));
-	DEFINE(pbe_next, offsetof(struct pbe, next));
-	BLANK();
-	DEFINE(TSS_ist, offsetof(struct tss_struct, ist));
-	BLANK();
-	DEFINE(crypto_tfm_ctx_offset, offsetof(struct crypto_tfm, __crt_ctx));
-	BLANK();
-	DEFINE(__NR_syscall_max, sizeof(syscalls) - 1);
-	return 0;
-}
diff --git a/arch/x86_64/kernel/audit_64.c b/arch/x86_64/kernel/audit_64.c
deleted file mode 100644
index 06d3e5a..0000000
--- a/arch/x86_64/kernel/audit_64.c
+++ /dev/null
@@ -1,81 +0,0 @@
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/audit.h>
-#include <asm/unistd.h>
-
-static unsigned dir_class[] = {
-#include <asm-generic/audit_dir_write.h>
-~0U
-};
-
-static unsigned read_class[] = {
-#include <asm-generic/audit_read.h>
-~0U
-};
-
-static unsigned write_class[] = {
-#include <asm-generic/audit_write.h>
-~0U
-};
-
-static unsigned chattr_class[] = {
-#include <asm-generic/audit_change_attr.h>
-~0U
-};
-
-static unsigned signal_class[] = {
-#include <asm-generic/audit_signal.h>
-~0U
-};
-
-int audit_classify_arch(int arch)
-{
-#ifdef CONFIG_IA32_EMULATION
-	if (arch == AUDIT_ARCH_I386)
-		return 1;
-#endif
-	return 0;
-}
-
-int audit_classify_syscall(int abi, unsigned syscall)
-{
-#ifdef CONFIG_IA32_EMULATION
-	extern int ia32_classify_syscall(unsigned);
-	if (abi == AUDIT_ARCH_I386)
-		return ia32_classify_syscall(syscall);
-#endif
-	switch(syscall) {
-	case __NR_open:
-		return 2;
-	case __NR_openat:
-		return 3;
-	case __NR_execve:
-		return 5;
-	default:
-		return 0;
-	}
-}
-
-static int __init audit_classes_init(void)
-{
-#ifdef CONFIG_IA32_EMULATION
-	extern __u32 ia32_dir_class[];
-	extern __u32 ia32_write_class[];
-	extern __u32 ia32_read_class[];
-	extern __u32 ia32_chattr_class[];
-	extern __u32 ia32_signal_class[];
-	audit_register_class(AUDIT_CLASS_WRITE_32, ia32_write_class);
-	audit_register_class(AUDIT_CLASS_READ_32, ia32_read_class);
-	audit_register_class(AUDIT_CLASS_DIR_WRITE_32, ia32_dir_class);
-	audit_register_class(AUDIT_CLASS_CHATTR_32, ia32_chattr_class);
-	audit_register_class(AUDIT_CLASS_SIGNAL_32, ia32_signal_class);
-#endif
-	audit_register_class(AUDIT_CLASS_WRITE, write_class);
-	audit_register_class(AUDIT_CLASS_READ, read_class);
-	audit_register_class(AUDIT_CLASS_DIR_WRITE, dir_class);
-	audit_register_class(AUDIT_CLASS_CHATTR, chattr_class);
-	audit_register_class(AUDIT_CLASS_SIGNAL, signal_class);
-	return 0;
-}
-
-__initcall(audit_classes_init);
diff --git a/arch/x86_64/kernel/bugs_64.c b/arch/x86_64/kernel/bugs_64.c
deleted file mode 100644
index 4e5e9d3..0000000
--- a/arch/x86_64/kernel/bugs_64.c
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- *  arch/x86_64/kernel/bugs.c
- *
- *  Copyright (C) 1994  Linus Torvalds
- *  Copyright (C) 2000  SuSE
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <asm/alternative.h>
-#include <asm/bugs.h>
-#include <asm/processor.h>
-#include <asm/mtrr.h>
-
-void __init check_bugs(void)
-{
-	identify_cpu(&boot_cpu_data);
-	mtrr_bp_init();
-#if !defined(CONFIG_SMP)
-	printk("CPU: ");
-	print_cpu_info(&boot_cpu_data);
-#endif
-	alternative_instructions();
-}
diff --git a/arch/x86_64/kernel/crash_64.c b/arch/x86_64/kernel/crash_64.c
deleted file mode 100644
index 13432a1..0000000
--- a/arch/x86_64/kernel/crash_64.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * Architecture specific (x86_64) functions for kexec based crash dumps.
- *
- * Created by: Hariprasad Nellitheertha (hari@in.ibm.com)
- *
- * Copyright (C) IBM Corporation, 2004. All rights reserved.
- *
- */
-
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/smp.h>
-#include <linux/irq.h>
-#include <linux/reboot.h>
-#include <linux/kexec.h>
-#include <linux/delay.h>
-#include <linux/elf.h>
-#include <linux/elfcore.h>
-#include <linux/kdebug.h>
-
-#include <asm/processor.h>
-#include <asm/hardirq.h>
-#include <asm/nmi.h>
-#include <asm/hw_irq.h>
-#include <asm/mach_apic.h>
-
-/* This keeps a track of which one is crashing cpu. */
-static int crashing_cpu;
-
-#ifdef CONFIG_SMP
-static atomic_t waiting_for_crash_ipi;
-
-static int crash_nmi_callback(struct notifier_block *self,
-				unsigned long val, void *data)
-{
-	struct pt_regs *regs;
-	int cpu;
-
-	if (val != DIE_NMI_IPI)
-		return NOTIFY_OK;
-
-	regs = ((struct die_args *)data)->regs;
-	cpu = raw_smp_processor_id();
-
-	/*
-	 * Don't do anything if this handler is invoked on crashing cpu.
-	 * Otherwise, system will completely hang. Crashing cpu can get
-	 * an NMI if system was initially booted with nmi_watchdog parameter.
-	 */
-	if (cpu == crashing_cpu)
-		return NOTIFY_STOP;
-	local_irq_disable();
-
-	crash_save_cpu(regs, cpu);
-	disable_local_APIC();
-	atomic_dec(&waiting_for_crash_ipi);
-	/* Assume hlt works */
-	for(;;)
-		halt();
-
-	return 1;
-}
-
-static void smp_send_nmi_allbutself(void)
-{
-	send_IPI_allbutself(NMI_VECTOR);
-}
-
-/*
- * This code is a best effort heuristic to get the
- * other cpus to stop executing. So races with
- * cpu hotplug shouldn't matter.
- */
-
-static struct notifier_block crash_nmi_nb = {
-	.notifier_call = crash_nmi_callback,
-};
-
-static void nmi_shootdown_cpus(void)
-{
-	unsigned long msecs;
-
-	atomic_set(&waiting_for_crash_ipi, num_online_cpus() - 1);
-	if (register_die_notifier(&crash_nmi_nb))
-		return;         /* return what? */
-
-	/*
-	 * Ensure the new callback function is set before sending
-	 * out the NMI
-	 */
-	wmb();
-
-	smp_send_nmi_allbutself();
-
-	msecs = 1000; /* Wait at most a second for the other cpus to stop */
-	while ((atomic_read(&waiting_for_crash_ipi) > 0) && msecs) {
-		mdelay(1);
-		msecs--;
-	}
-	/* Leave the nmi callback set */
-	disable_local_APIC();
-}
-#else
-static void nmi_shootdown_cpus(void)
-{
-	/* There are no cpus to shootdown */
-}
-#endif
-
-void machine_crash_shutdown(struct pt_regs *regs)
-{
-	/*
-	 * This function is only called after the system
-	 * has panicked or is otherwise in a critical state.
-	 * The minimum amount of code to allow a kexec'd kernel
-	 * to run successfully needs to happen here.
-	 *
-	 * In practice this means shooting down the other cpus in
-	 * an SMP system.
-	 */
-	/* The kernel is broken so disable interrupts */
-	local_irq_disable();
-
-	/* Make a note of crashing cpu. Will be used in NMI callback.*/
-	crashing_cpu = smp_processor_id();
-	nmi_shootdown_cpus();
-
-	if(cpu_has_apic)
-		 disable_local_APIC();
-
-	disable_IO_APIC();
-
-	crash_save_cpu(regs, smp_processor_id());
-}
diff --git a/arch/x86_64/kernel/crash_dump_64.c b/arch/x86_64/kernel/crash_dump_64.c
deleted file mode 100644
index 942deac..0000000
--- a/arch/x86_64/kernel/crash_dump_64.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- *	kernel/crash_dump.c - Memory preserving reboot related code.
- *
- *	Created by: Hariprasad Nellitheertha (hari@in.ibm.com)
- *	Copyright (C) IBM Corporation, 2004. All rights reserved
- */
-
-#include <linux/errno.h>
-#include <linux/crash_dump.h>
-
-#include <asm/uaccess.h>
-#include <asm/io.h>
-
-/**
- * copy_oldmem_page - copy one page from "oldmem"
- * @pfn: page frame number to be copied
- * @buf: target memory address for the copy; this can be in kernel address
- *	space or user address space (see @userbuf)
- * @csize: number of bytes to copy
- * @offset: offset in bytes into the page (based on pfn) to begin the copy
- * @userbuf: if set, @buf is in user address space, use copy_to_user(),
- *	otherwise @buf is in kernel address space, use memcpy().
- *
- * Copy a page from "oldmem". For this page, there is no pte mapped
- * in the current kernel. We stitch up a pte, similar to kmap_atomic.
- */
-ssize_t copy_oldmem_page(unsigned long pfn, char *buf,
-                               size_t csize, unsigned long offset, int userbuf)
-{
-	void  *vaddr;
-
-	if (!csize)
-		return 0;
-
-	vaddr = ioremap(pfn << PAGE_SHIFT, PAGE_SIZE);
-
-	if (userbuf) {
-		if (copy_to_user(buf, (vaddr + offset), csize)) {
-			iounmap(vaddr);
-			return -EFAULT;
-		}
-	} else
-	memcpy(buf, (vaddr + offset), csize);
-
-	iounmap(vaddr);
-	return csize;
-}
diff --git a/arch/x86_64/kernel/e820_64.c b/arch/x86_64/kernel/e820_64.c
deleted file mode 100644
index 0f4d5e2..0000000
--- a/arch/x86_64/kernel/e820_64.c
+++ /dev/null
@@ -1,725 +0,0 @@
-/* 
- * Handle the memory map.
- * The functions here do the job until bootmem takes over.
- *
- *  Getting sanitize_e820_map() in sync with i386 version by applying change:
- *  -  Provisions for empty E820 memory regions (reported by certain BIOSes).
- *     Alex Achenbach <xela@slit.de>, December 2002.
- *  Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
- *
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-#include <linux/ioport.h>
-#include <linux/string.h>
-#include <linux/kexec.h>
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/suspend.h>
-#include <linux/pfn.h>
-
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/e820.h>
-#include <asm/proto.h>
-#include <asm/bootsetup.h>
-#include <asm/sections.h>
-
-struct e820map e820;
-
-/* 
- * PFN of last memory page.
- */
-unsigned long end_pfn; 
-EXPORT_SYMBOL(end_pfn);
-
-/* 
- * end_pfn only includes RAM, while end_pfn_map includes all e820 entries.
- * The direct mapping extends to end_pfn_map, so that we can directly access
- * apertures, ACPI and other tables without having to play with fixmaps.
- */ 
-unsigned long end_pfn_map; 
-
-/* 
- * Last pfn which the user wants to use.
- */
-static unsigned long __initdata end_user_pfn = MAXMEM>>PAGE_SHIFT;
-
-extern struct resource code_resource, data_resource;
-
-/* Check for some hardcoded bad areas that early boot is not allowed to touch */ 
-static inline int bad_addr(unsigned long *addrp, unsigned long size)
-{ 
-	unsigned long addr = *addrp, last = addr + size; 
-
-	/* various gunk below that needed for SMP startup */
-	if (addr < 0x8000) { 
-		*addrp = PAGE_ALIGN(0x8000);
-		return 1; 
-	}
-
-	/* direct mapping tables of the kernel */
-	if (last >= table_start<<PAGE_SHIFT && addr < table_end<<PAGE_SHIFT) { 
-		*addrp = PAGE_ALIGN(table_end << PAGE_SHIFT);
-		return 1;
-	} 
-
-	/* initrd */ 
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (LOADER_TYPE && INITRD_START && last >= INITRD_START && 
-	    addr < INITRD_START+INITRD_SIZE) { 
-		*addrp = PAGE_ALIGN(INITRD_START + INITRD_SIZE);
-		return 1;
-	} 
-#endif
-	/* kernel code */
-	if (last >= __pa_symbol(&_text) && addr < __pa_symbol(&_end)) {
-		*addrp = PAGE_ALIGN(__pa_symbol(&_end));
-		return 1;
-	}
-
-	if (last >= ebda_addr && addr < ebda_addr + ebda_size) {
-		*addrp = PAGE_ALIGN(ebda_addr + ebda_size);
-		return 1;
-	}
-
-#ifdef CONFIG_NUMA
-	/* NUMA memory to node map */
-	if (last >= nodemap_addr && addr < nodemap_addr + nodemap_size) {
-		*addrp = nodemap_addr + nodemap_size;
-		return 1;
-	}
-#endif
-	/* XXX ramdisk image here? */ 
-	return 0;
-} 
-
-/*
- * This function checks if any part of the range <start,end> is mapped
- * with type.
- */
-int
-e820_any_mapped(unsigned long start, unsigned long end, unsigned type)
-{ 
-	int i;
-	for (i = 0; i < e820.nr_map; i++) { 
-		struct e820entry *ei = &e820.map[i]; 
-		if (type && ei->type != type) 
-			continue;
-		if (ei->addr >= end || ei->addr + ei->size <= start)
-			continue; 
-		return 1; 
-	} 
-	return 0;
-}
-EXPORT_SYMBOL_GPL(e820_any_mapped);
-
-/*
- * This function checks if the entire range <start,end> is mapped with type.
- *
- * Note: this function only works correct if the e820 table is sorted and
- * not-overlapping, which is the case
- */
-int __init e820_all_mapped(unsigned long start, unsigned long end, unsigned type)
-{
-	int i;
-	for (i = 0; i < e820.nr_map; i++) {
-		struct e820entry *ei = &e820.map[i];
-		if (type && ei->type != type)
-			continue;
-		/* is the region (part) in overlap with the current region ?*/
-		if (ei->addr >= end || ei->addr + ei->size <= start)
-			continue;
-
-		/* if the region is at the beginning of <start,end> we move
-		 * start to the end of the region since it's ok until there
-		 */
-		if (ei->addr <= start)
-			start = ei->addr + ei->size;
-		/* if start is now at or beyond end, we're done, full coverage */
-		if (start >= end)
-			return 1; /* we're done */
-	}
-	return 0;
-}
-
-/* 
- * Find a free area in a specific range. 
- */ 
-unsigned long __init find_e820_area(unsigned long start, unsigned long end, unsigned size) 
-{ 
-	int i; 
-	for (i = 0; i < e820.nr_map; i++) { 
-		struct e820entry *ei = &e820.map[i]; 
-		unsigned long addr = ei->addr, last; 
-		if (ei->type != E820_RAM) 
-			continue; 
-		if (addr < start) 
-			addr = start;
-		if (addr > ei->addr + ei->size) 
-			continue; 
-		while (bad_addr(&addr, size) && addr+size <= ei->addr+ei->size)
-			;
-		last = PAGE_ALIGN(addr) + size;
-		if (last > ei->addr + ei->size)
-			continue;
-		if (last > end) 
-			continue;
-		return addr; 
-	} 
-	return -1UL;		
-} 
-
-/*
- * Find the highest page frame number we have available
- */
-unsigned long __init e820_end_of_ram(void)
-{
-	unsigned long end_pfn = 0;
-	end_pfn = find_max_pfn_with_active_regions();
-	
-	if (end_pfn > end_pfn_map) 
-		end_pfn_map = end_pfn;
-	if (end_pfn_map > MAXMEM>>PAGE_SHIFT)
-		end_pfn_map = MAXMEM>>PAGE_SHIFT;
-	if (end_pfn > end_user_pfn)
-		end_pfn = end_user_pfn;
-	if (end_pfn > end_pfn_map) 
-		end_pfn = end_pfn_map; 
-
-	printk("end_pfn_map = %lu\n", end_pfn_map);
-	return end_pfn;	
-}
-
-/*
- * Mark e820 reserved areas as busy for the resource manager.
- */
-void __init e820_reserve_resources(void)
-{
-	int i;
-	for (i = 0; i < e820.nr_map; i++) {
-		struct resource *res;
-		res = alloc_bootmem_low(sizeof(struct resource));
-		switch (e820.map[i].type) {
-		case E820_RAM:	res->name = "System RAM"; break;
-		case E820_ACPI:	res->name = "ACPI Tables"; break;
-		case E820_NVS:	res->name = "ACPI Non-volatile Storage"; break;
-		default:	res->name = "reserved";
-		}
-		res->start = e820.map[i].addr;
-		res->end = res->start + e820.map[i].size - 1;
-		res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
-		request_resource(&iomem_resource, res);
-		if (e820.map[i].type == E820_RAM) {
-			/*
-			 *  We don't know which RAM region contains kernel data,
-			 *  so we try it repeatedly and let the resource manager
-			 *  test it.
-			 */
-			request_resource(res, &code_resource);
-			request_resource(res, &data_resource);
-#ifdef CONFIG_KEXEC
-			request_resource(res, &crashk_res);
-#endif
-		}
-	}
-}
-
-/*
- * Find the ranges of physical addresses that do not correspond to
- * e820 RAM areas and mark the corresponding pages as nosave for software
- * suspend and suspend to RAM.
- *
- * This function requires the e820 map to be sorted and without any
- * overlapping entries and assumes the first e820 area to be RAM.
- */
-void __init e820_mark_nosave_regions(void)
-{
-	int i;
-	unsigned long paddr;
-
-	paddr = round_down(e820.map[0].addr + e820.map[0].size, PAGE_SIZE);
-	for (i = 1; i < e820.nr_map; i++) {
-		struct e820entry *ei = &e820.map[i];
-
-		if (paddr < ei->addr)
-			register_nosave_region(PFN_DOWN(paddr),
-						PFN_UP(ei->addr));
-
-		paddr = round_down(ei->addr + ei->size, PAGE_SIZE);
-		if (ei->type != E820_RAM)
-			register_nosave_region(PFN_UP(ei->addr),
-						PFN_DOWN(paddr));
-
-		if (paddr >= (end_pfn << PAGE_SHIFT))
-			break;
-	}
-}
-
-/*
- * Finds an active region in the address range from start_pfn to end_pfn and
- * returns its range in ei_startpfn and ei_endpfn for the e820 entry.
- */
-static int __init e820_find_active_region(const struct e820entry *ei,
-					  unsigned long start_pfn,
-					  unsigned long end_pfn,
-					  unsigned long *ei_startpfn,
-					  unsigned long *ei_endpfn)
-{
-	*ei_startpfn = round_up(ei->addr, PAGE_SIZE) >> PAGE_SHIFT;
-	*ei_endpfn = round_down(ei->addr + ei->size, PAGE_SIZE) >> PAGE_SHIFT;
-
-	/* Skip map entries smaller than a page */
-	if (*ei_startpfn >= *ei_endpfn)
-		return 0;
-
-	/* Check if end_pfn_map should be updated */
-	if (ei->type != E820_RAM && *ei_endpfn > end_pfn_map)
-		end_pfn_map = *ei_endpfn;
-
-	/* Skip if map is outside the node */
-	if (ei->type != E820_RAM || *ei_endpfn <= start_pfn ||
-				    *ei_startpfn >= end_pfn)
-		return 0;
-
-	/* Check for overlaps */
-	if (*ei_startpfn < start_pfn)
-		*ei_startpfn = start_pfn;
-	if (*ei_endpfn > end_pfn)
-		*ei_endpfn = end_pfn;
-
-	/* Obey end_user_pfn to save on memmap */
-	if (*ei_startpfn >= end_user_pfn)
-		return 0;
-	if (*ei_endpfn > end_user_pfn)
-		*ei_endpfn = end_user_pfn;
-
-	return 1;
-}
-
-/* Walk the e820 map and register active regions within a node */
-void __init
-e820_register_active_regions(int nid, unsigned long start_pfn,
-							unsigned long end_pfn)
-{
-	unsigned long ei_startpfn;
-	unsigned long ei_endpfn;
-	int i;
-
-	for (i = 0; i < e820.nr_map; i++)
-		if (e820_find_active_region(&e820.map[i],
-					    start_pfn, end_pfn,
-					    &ei_startpfn, &ei_endpfn))
-			add_active_range(nid, ei_startpfn, ei_endpfn);
-}
-
-/* 
- * Add a memory region to the kernel e820 map.
- */ 
-void __init add_memory_region(unsigned long start, unsigned long size, int type)
-{
-	int x = e820.nr_map;
-
-	if (x == E820MAX) {
-		printk(KERN_ERR "Ooops! Too many entries in the memory map!\n");
-		return;
-	}
-
-	e820.map[x].addr = start;
-	e820.map[x].size = size;
-	e820.map[x].type = type;
-	e820.nr_map++;
-}
-
-/*
- * Find the hole size (in bytes) in the memory range.
- * @start: starting address of the memory range to scan
- * @end: ending address of the memory range to scan
- */
-unsigned long __init e820_hole_size(unsigned long start, unsigned long end)
-{
-	unsigned long start_pfn = start >> PAGE_SHIFT;
-	unsigned long end_pfn = end >> PAGE_SHIFT;
-	unsigned long ei_startpfn;
-	unsigned long ei_endpfn;
-	unsigned long ram = 0;
-	int i;
-
-	for (i = 0; i < e820.nr_map; i++) {
-		if (e820_find_active_region(&e820.map[i],
-					    start_pfn, end_pfn,
-					    &ei_startpfn, &ei_endpfn))
-			ram += ei_endpfn - ei_startpfn;
-	}
-	return end - start - (ram << PAGE_SHIFT);
-}
-
-void __init e820_print_map(char *who)
-{
-	int i;
-
-	for (i = 0; i < e820.nr_map; i++) {
-		printk(KERN_INFO " %s: %016Lx - %016Lx ", who,
-			(unsigned long long) e820.map[i].addr,
-			(unsigned long long) (e820.map[i].addr + e820.map[i].size));
-		switch (e820.map[i].type) {
-		case E820_RAM:	printk("(usable)\n");
-				break;
-		case E820_RESERVED:
-				printk("(reserved)\n");
-				break;
-		case E820_ACPI:
-				printk("(ACPI data)\n");
-				break;
-		case E820_NVS:
-				printk("(ACPI NVS)\n");
-				break;
-		default:	printk("type %u\n", e820.map[i].type);
-				break;
-		}
-	}
-}
-
-/*
- * Sanitize the BIOS e820 map.
- *
- * Some e820 responses include overlapping entries.  The following 
- * replaces the original e820 map with a new one, removing overlaps.
- *
- */
-static int __init sanitize_e820_map(struct e820entry * biosmap, char * pnr_map)
-{
-	struct change_member {
-		struct e820entry *pbios; /* pointer to original bios entry */
-		unsigned long long addr; /* address for this change point */
-	};
-	static struct change_member change_point_list[2*E820MAX] __initdata;
-	static struct change_member *change_point[2*E820MAX] __initdata;
-	static struct e820entry *overlap_list[E820MAX] __initdata;
-	static struct e820entry new_bios[E820MAX] __initdata;
-	struct change_member *change_tmp;
-	unsigned long current_type, last_type;
-	unsigned long long last_addr;
-	int chgidx, still_changing;
-	int overlap_entries;
-	int new_bios_entry;
-	int old_nr, new_nr, chg_nr;
-	int i;
-
-	/*
-		Visually we're performing the following (1,2,3,4 = memory types)...
-
-		Sample memory map (w/overlaps):
-		   ____22__________________
-		   ______________________4_
-		   ____1111________________
-		   _44_____________________
-		   11111111________________
-		   ____________________33__
-		   ___________44___________
-		   __________33333_________
-		   ______________22________
-		   ___________________2222_
-		   _________111111111______
-		   _____________________11_
-		   _________________4______
-
-		Sanitized equivalent (no overlap):
-		   1_______________________
-		   _44_____________________
-		   ___1____________________
-		   ____22__________________
-		   ______11________________
-		   _________1______________
-		   __________3_____________
-		   ___________44___________
-		   _____________33_________
-		   _______________2________
-		   ________________1_______
-		   _________________4______
-		   ___________________2____
-		   ____________________33__
-		   ______________________4_
-	*/
-
-	/* if there's only one memory region, don't bother */
-	if (*pnr_map < 2)
-		return -1;
-
-	old_nr = *pnr_map;
-
-	/* bail out if we find any unreasonable addresses in bios map */
-	for (i=0; i<old_nr; i++)
-		if (biosmap[i].addr + biosmap[i].size < biosmap[i].addr)
-			return -1;
-
-	/* create pointers for initial change-point information (for sorting) */
-	for (i=0; i < 2*old_nr; i++)
-		change_point[i] = &change_point_list[i];
-
-	/* record all known change-points (starting and ending addresses),
-	   omitting those that are for empty memory regions */
-	chgidx = 0;
-	for (i=0; i < old_nr; i++)	{
-		if (biosmap[i].size != 0) {
-			change_point[chgidx]->addr = biosmap[i].addr;
-			change_point[chgidx++]->pbios = &biosmap[i];
-			change_point[chgidx]->addr = biosmap[i].addr + biosmap[i].size;
-			change_point[chgidx++]->pbios = &biosmap[i];
-		}
-	}
-	chg_nr = chgidx;
-
-	/* sort change-point list by memory addresses (low -> high) */
-	still_changing = 1;
-	while (still_changing)	{
-		still_changing = 0;
-		for (i=1; i < chg_nr; i++)  {
-			/* if <current_addr> > <last_addr>, swap */
-			/* or, if current=<start_addr> & last=<end_addr>, swap */
-			if ((change_point[i]->addr < change_point[i-1]->addr) ||
-				((change_point[i]->addr == change_point[i-1]->addr) &&
-				 (change_point[i]->addr == change_point[i]->pbios->addr) &&
-				 (change_point[i-1]->addr != change_point[i-1]->pbios->addr))
-			   )
-			{
-				change_tmp = change_point[i];
-				change_point[i] = change_point[i-1];
-				change_point[i-1] = change_tmp;
-				still_changing=1;
-			}
-		}
-	}
-
-	/* create a new bios memory map, removing overlaps */
-	overlap_entries=0;	 /* number of entries in the overlap table */
-	new_bios_entry=0;	 /* index for creating new bios map entries */
-	last_type = 0;		 /* start with undefined memory type */
-	last_addr = 0;		 /* start with 0 as last starting address */
-	/* loop through change-points, determining affect on the new bios map */
-	for (chgidx=0; chgidx < chg_nr; chgidx++)
-	{
-		/* keep track of all overlapping bios entries */
-		if (change_point[chgidx]->addr == change_point[chgidx]->pbios->addr)
-		{
-			/* add map entry to overlap list (> 1 entry implies an overlap) */
-			overlap_list[overlap_entries++]=change_point[chgidx]->pbios;
-		}
-		else
-		{
-			/* remove entry from list (order independent, so swap with last) */
-			for (i=0; i<overlap_entries; i++)
-			{
-				if (overlap_list[i] == change_point[chgidx]->pbios)
-					overlap_list[i] = overlap_list[overlap_entries-1];
-			}
-			overlap_entries--;
-		}
-		/* if there are overlapping entries, decide which "type" to use */
-		/* (larger value takes precedence -- 1=usable, 2,3,4,4+=unusable) */
-		current_type = 0;
-		for (i=0; i<overlap_entries; i++)
-			if (overlap_list[i]->type > current_type)
-				current_type = overlap_list[i]->type;
-		/* continue building up new bios map based on this information */
-		if (current_type != last_type)	{
-			if (last_type != 0)	 {
-				new_bios[new_bios_entry].size =
-					change_point[chgidx]->addr - last_addr;
-				/* move forward only if the new size was non-zero */
-				if (new_bios[new_bios_entry].size != 0)
-					if (++new_bios_entry >= E820MAX)
-						break; 	/* no more space left for new bios entries */
-			}
-			if (current_type != 0)	{
-				new_bios[new_bios_entry].addr = change_point[chgidx]->addr;
-				new_bios[new_bios_entry].type = current_type;
-				last_addr=change_point[chgidx]->addr;
-			}
-			last_type = current_type;
-		}
-	}
-	new_nr = new_bios_entry;   /* retain count for new bios entries */
-
-	/* copy new bios mapping into original location */
-	memcpy(biosmap, new_bios, new_nr*sizeof(struct e820entry));
-	*pnr_map = new_nr;
-
-	return 0;
-}
-
-/*
- * Copy the BIOS e820 map into a safe place.
- *
- * Sanity-check it while we're at it..
- *
- * If we're lucky and live on a modern system, the setup code
- * will have given us a memory map that we can use to properly
- * set up memory.  If we aren't, we'll fake a memory map.
- */
-static int __init copy_e820_map(struct e820entry * biosmap, int nr_map)
-{
-	/* Only one memory region (or negative)? Ignore it */
-	if (nr_map < 2)
-		return -1;
-
-	do {
-		unsigned long start = biosmap->addr;
-		unsigned long size = biosmap->size;
-		unsigned long end = start + size;
-		unsigned long type = biosmap->type;
-
-		/* Overflow in 64 bits? Ignore the memory map. */
-		if (start > end)
-			return -1;
-
-		add_memory_region(start, size, type);
-	} while (biosmap++,--nr_map);
-	return 0;
-}
-
-void early_panic(char *msg)
-{
-	early_printk(msg);
-	panic(msg);
-}
-
-void __init setup_memory_region(void)
-{
-	/*
-	 * Try to copy the BIOS-supplied E820-map.
-	 *
-	 * Otherwise fake a memory map; one section from 0k->640k,
-	 * the next section from 1mb->appropriate_mem_k
-	 */
-	sanitize_e820_map(E820_MAP, &E820_MAP_NR);
-	if (copy_e820_map(E820_MAP, E820_MAP_NR) < 0)
-		early_panic("Cannot find a valid memory map");
-	printk(KERN_INFO "BIOS-provided physical RAM map:\n");
-	e820_print_map("BIOS-e820");
-}
-
-static int __init parse_memopt(char *p)
-{
-	if (!p)
-		return -EINVAL;
-	end_user_pfn = memparse(p, &p);
-	end_user_pfn >>= PAGE_SHIFT;	
-	return 0;
-} 
-early_param("mem", parse_memopt);
-
-static int userdef __initdata;
-
-static int __init parse_memmap_opt(char *p)
-{
-	char *oldp;
-	unsigned long long start_at, mem_size;
-
-	if (!strcmp(p, "exactmap")) {
-#ifdef CONFIG_CRASH_DUMP
-		/* If we are doing a crash dump, we
-		 * still need to know the real mem
-		 * size before original memory map is
-		 * reset.
-		 */
-		e820_register_active_regions(0, 0, -1UL);
-		saved_max_pfn = e820_end_of_ram();
-		remove_all_active_ranges();
-#endif
-		end_pfn_map = 0;
-		e820.nr_map = 0;
-		userdef = 1;
-		return 0;
-	}
-
-	oldp = p;
-	mem_size = memparse(p, &p);
-	if (p == oldp)
-		return -EINVAL;
-	if (*p == '@') {
-		start_at = memparse(p+1, &p);
-		add_memory_region(start_at, mem_size, E820_RAM);
-	} else if (*p == '#') {
-		start_at = memparse(p+1, &p);
-		add_memory_region(start_at, mem_size, E820_ACPI);
-	} else if (*p == '$') {
-		start_at = memparse(p+1, &p);
-		add_memory_region(start_at, mem_size, E820_RESERVED);
-	} else {
-		end_user_pfn = (mem_size >> PAGE_SHIFT);
-	}
-	return *p == '\0' ? 0 : -EINVAL;
-}
-early_param("memmap", parse_memmap_opt);
-
-void __init finish_e820_parsing(void)
-{
-	if (userdef) {
-		printk(KERN_INFO "user-defined physical RAM map:\n");
-		e820_print_map("user");
-	}
-}
-
-unsigned long pci_mem_start = 0xaeedbabe;
-EXPORT_SYMBOL(pci_mem_start);
-
-/*
- * Search for the biggest gap in the low 32 bits of the e820
- * memory space.  We pass this space to PCI to assign MMIO resources
- * for hotplug or unconfigured devices in.
- * Hopefully the BIOS let enough space left.
- */
-__init void e820_setup_gap(void)
-{
-	unsigned long gapstart, gapsize, round;
-	unsigned long last;
-	int i;
-	int found = 0;
-
-	last = 0x100000000ull;
-	gapstart = 0x10000000;
-	gapsize = 0x400000;
-	i = e820.nr_map;
-	while (--i >= 0) {
-		unsigned long long start = e820.map[i].addr;
-		unsigned long long end = start + e820.map[i].size;
-
-		/*
-		 * Since "last" is at most 4GB, we know we'll
-		 * fit in 32 bits if this condition is true
-		 */
-		if (last > end) {
-			unsigned long gap = last - end;
-
-			if (gap > gapsize) {
-				gapsize = gap;
-				gapstart = end;
-				found = 1;
-			}
-		}
-		if (start < last)
-			last = start;
-	}
-
-	if (!found) {
-		gapstart = (end_pfn << PAGE_SHIFT) + 1024*1024;
-		printk(KERN_ERR "PCI: Warning: Cannot find a gap in the 32bit address range\n"
-		       KERN_ERR "PCI: Unassigned devices with 32bit resource registers may break!\n");
-	}
-
-	/*
-	 * See how much we want to round up: start off with
-	 * rounding to the next 1MB area.
-	 */
-	round = 0x100000;
-	while ((gapsize >> 4) > round)
-		round += round;
-	/* Fun with two's complement */
-	pci_mem_start = (gapstart + round) & -round;
-
-	printk(KERN_INFO "Allocating PCI resources starting at %lx (gap: %lx:%lx)\n",
-		pci_mem_start, gapstart, gapsize);
-}
diff --git a/arch/x86_64/kernel/early-quirks_64.c b/arch/x86_64/kernel/early-quirks_64.c
deleted file mode 100644
index 13aa4fd..0000000
--- a/arch/x86_64/kernel/early-quirks_64.c
+++ /dev/null
@@ -1,127 +0,0 @@
-/* Various workarounds for chipset bugs.
-   This code runs very early and can't use the regular PCI subsystem
-   The entries are keyed to PCI bridges which usually identify chipsets
-   uniquely.
-   This is only for whole classes of chipsets with specific problems which
-   need early invasive action (e.g. before the timers are initialized).
-   Most PCI device specific workarounds can be done later and should be
-   in standard PCI quirks
-   Mainboard specific bugs should be handled by DMI entries.
-   CPU specific bugs in setup.c */
-
-#include <linux/pci.h>
-#include <linux/acpi.h>
-#include <linux/pci_ids.h>
-#include <asm/pci-direct.h>
-#include <asm/proto.h>
-#include <asm/iommu.h>
-#include <asm/dma.h>
-
-static void __init via_bugs(void)
-{
-#ifdef CONFIG_IOMMU
-	if ((end_pfn > MAX_DMA32_PFN ||  force_iommu) &&
-	    !iommu_aperture_allowed) {
-		printk(KERN_INFO
-  "Looks like a VIA chipset. Disabling IOMMU. Override with iommu=allowed\n");
-		iommu_aperture_disabled = 1;
-	}
-#endif
-}
-
-#ifdef CONFIG_ACPI
-
-static int __init nvidia_hpet_check(struct acpi_table_header *header)
-{
-	return 0;
-}
-#endif
-
-static void __init nvidia_bugs(void)
-{
-#ifdef CONFIG_ACPI
-	/*
-	 * All timer overrides on Nvidia are
-	 * wrong unless HPET is enabled.
-	 * Unfortunately that's not true on many Asus boards.
-	 * We don't know yet how to detect this automatically, but
-	 * at least allow a command line override.
-	 */
-	if (acpi_use_timer_override)
-		return;
-
-	if (acpi_table_parse(ACPI_SIG_HPET, nvidia_hpet_check)) {
-		acpi_skip_timer_override = 1;
-		printk(KERN_INFO "Nvidia board "
-		       "detected. Ignoring ACPI "
-		       "timer override.\n");
-		printk(KERN_INFO "If you got timer trouble "
-			"try acpi_use_timer_override\n");
-	}
-#endif
-	/* RED-PEN skip them on mptables too? */
-
-}
-
-static void __init ati_bugs(void)
-{
-	if (timer_over_8254 == 1) {
-		timer_over_8254 = 0;
-		printk(KERN_INFO
-	 	"ATI board detected. Disabling timer routing over 8254.\n");
-	}
-}
-
-struct chipset {
-	u16 vendor;
-	void (*f)(void);
-};
-
-static struct chipset early_qrk[] __initdata = {
-	{ PCI_VENDOR_ID_NVIDIA, nvidia_bugs },
-	{ PCI_VENDOR_ID_VIA, via_bugs },
-	{ PCI_VENDOR_ID_ATI, ati_bugs },
-	{}
-};
-
-void __init early_quirks(void)
-{
-	int num, slot, func;
-
-	if (!early_pci_allowed())
-		return;
-
-	/* Poor man's PCI discovery */
-	for (num = 0; num < 32; num++) {
-		for (slot = 0; slot < 32; slot++) {
-			for (func = 0; func < 8; func++) {
-				u32 class;
-				u32 vendor;
-				u8 type;
-				int i;
-				class = read_pci_config(num,slot,func,
-							PCI_CLASS_REVISION);
-				if (class == 0xffffffff)
-					break;
-
-		       		if ((class >> 16) != PCI_CLASS_BRIDGE_PCI)
-					continue;
-
-				vendor = read_pci_config(num, slot, func,
-							 PCI_VENDOR_ID);
-				vendor &= 0xffff;
-
-				for (i = 0; early_qrk[i].f; i++)
-					if (early_qrk[i].vendor == vendor) {
-						early_qrk[i].f();
-						return;
-					}
-
-				type = read_pci_config_byte(num, slot, func,
-							    PCI_HEADER_TYPE);
-				if (!(type & 0x80))
-					break;
-			}
-		}
-	}
-}
diff --git a/arch/x86_64/kernel/early_printk.c b/arch/x86_64/kernel/early_printk.c
deleted file mode 100644
index fd9aff3..0000000
--- a/arch/x86_64/kernel/early_printk.c
+++ /dev/null
@@ -1,259 +0,0 @@
-#include <linux/console.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/screen_info.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-#include <asm/fcntl.h>
-#include <xen/hvc-console.h>
-
-/* Simple VGA output */
-
-#ifdef __i386__
-#include <asm/setup.h>
-#else
-#include <asm/bootsetup.h>
-#endif
-#define VGABASE		(__ISA_IO_base + 0xb8000)
-
-static int max_ypos = 25, max_xpos = 80;
-static int current_ypos = 25, current_xpos = 0;
-
-static void early_vga_write(struct console *con, const char *str, unsigned n)
-{
-	char c;
-	int  i, k, j;
-
-	while ((c = *str++) != '\0' && n-- > 0) {
-		if (current_ypos >= max_ypos) {
-			/* scroll 1 line up */
-			for (k = 1, j = 0; k < max_ypos; k++, j++) {
-				for (i = 0; i < max_xpos; i++) {
-					writew(readw(VGABASE+2*(max_xpos*k+i)),
-					       VGABASE + 2*(max_xpos*j + i));
-				}
-			}
-			for (i = 0; i < max_xpos; i++)
-				writew(0x720, VGABASE + 2*(max_xpos*j + i));
-			current_ypos = max_ypos-1;
-		}
-		if (c == '\n') {
-			current_xpos = 0;
-			current_ypos++;
-		} else if (c != '\r')  {
-			writew(((0x7 << 8) | (unsigned short) c),
-			       VGABASE + 2*(max_xpos*current_ypos +
-						current_xpos++));
-			if (current_xpos >= max_xpos) {
-				current_xpos = 0;
-				current_ypos++;
-			}
-		}
-	}
-}
-
-static struct console early_vga_console = {
-	.name =		"earlyvga",
-	.write =	early_vga_write,
-	.flags =	CON_PRINTBUFFER,
-	.index =	-1,
-};
-
-/* Serial functions loosely based on a similar package from Klaus P. Gerlicher */
-
-static int early_serial_base = 0x3f8;  /* ttyS0 */
-
-#define XMTRDY          0x20
-
-#define DLAB		0x80
-
-#define TXR             0       /*  Transmit register (WRITE) */
-#define RXR             0       /*  Receive register  (READ)  */
-#define IER             1       /*  Interrupt Enable          */
-#define IIR             2       /*  Interrupt ID              */
-#define FCR             2       /*  FIFO control              */
-#define LCR             3       /*  Line control              */
-#define MCR             4       /*  Modem control             */
-#define LSR             5       /*  Line Status               */
-#define MSR             6       /*  Modem Status              */
-#define DLL             0       /*  Divisor Latch Low         */
-#define DLH             1       /*  Divisor latch High        */
-
-static int early_serial_putc(unsigned char ch)
-{
-	unsigned timeout = 0xffff;
-	while ((inb(early_serial_base + LSR) & XMTRDY) == 0 && --timeout)
-		cpu_relax();
-	outb(ch, early_serial_base + TXR);
-	return timeout ? 0 : -1;
-}
-
-static void early_serial_write(struct console *con, const char *s, unsigned n)
-{
-	while (*s && n-- > 0) {
-		if (*s == '\n')
-			early_serial_putc('\r');
-		early_serial_putc(*s);
-		s++;
-	}
-}
-
-#define DEFAULT_BAUD 9600
-
-static __init void early_serial_init(char *s)
-{
-	unsigned char c;
-	unsigned divisor;
-	unsigned baud = DEFAULT_BAUD;
-	char *e;
-
-	if (*s == ',')
-		++s;
-
-	if (*s) {
-		unsigned port;
-		if (!strncmp(s,"0x",2)) {
-			early_serial_base = simple_strtoul(s, &e, 16);
-		} else {
-			static int bases[] = { 0x3f8, 0x2f8 };
-
-			if (!strncmp(s,"ttyS",4))
-				s += 4;
-			port = simple_strtoul(s, &e, 10);
-			if (port > 1 || s == e)
-				port = 0;
-			early_serial_base = bases[port];
-		}
-		s += strcspn(s, ",");
-		if (*s == ',')
-			s++;
-	}
-
-	outb(0x3, early_serial_base + LCR);	/* 8n1 */
-	outb(0, early_serial_base + IER);	/* no interrupt */
-	outb(0, early_serial_base + FCR);	/* no fifo */
-	outb(0x3, early_serial_base + MCR);	/* DTR + RTS */
-
-	if (*s) {
-		baud = simple_strtoul(s, &e, 0);
-		if (baud == 0 || s == e)
-			baud = DEFAULT_BAUD;
-	}
-
-	divisor = 115200 / baud;
-	c = inb(early_serial_base + LCR);
-	outb(c | DLAB, early_serial_base + LCR);
-	outb(divisor & 0xff, early_serial_base + DLL);
-	outb((divisor >> 8) & 0xff, early_serial_base + DLH);
-	outb(c & ~DLAB, early_serial_base + LCR);
-}
-
-static struct console early_serial_console = {
-	.name =		"earlyser",
-	.write =	early_serial_write,
-	.flags =	CON_PRINTBUFFER,
-	.index =	-1,
-};
-
-/* Console interface to a host file on AMD's SimNow! */
-
-static int simnow_fd;
-
-enum {
-	MAGIC1 = 0xBACCD00A,
-	MAGIC2 = 0xCA110000,
-	XOPEN = 5,
-	XWRITE = 4,
-};
-
-static noinline long simnow(long cmd, long a, long b, long c)
-{
-	long ret;
-	asm volatile("cpuid" :
-		     "=a" (ret) :
-		     "b" (a), "c" (b), "d" (c), "0" (MAGIC1), "D" (cmd + MAGIC2));
-	return ret;
-}
-
-static void __init simnow_init(char *str)
-{
-	char *fn = "klog";
-	if (*str == '=')
-		fn = ++str;
-	/* error ignored */
-	simnow_fd = simnow(XOPEN, (unsigned long)fn, O_WRONLY|O_APPEND|O_CREAT, 0644);
-}
-
-static void simnow_write(struct console *con, const char *s, unsigned n)
-{
-	simnow(XWRITE, simnow_fd, (unsigned long)s, n);
-}
-
-static struct console simnow_console = {
-	.name =		"simnow",
-	.write =	simnow_write,
-	.flags =	CON_PRINTBUFFER,
-	.index =	-1,
-};
-
-/* Direct interface for emergencies */
-struct console *early_console = &early_vga_console;
-static int early_console_initialized = 0;
-
-void early_printk(const char *fmt, ...)
-{
-	char buf[512];
-	int n;
-	va_list ap;
-
-	va_start(ap,fmt);
-	n = vscnprintf(buf,512,fmt,ap);
-	early_console->write(early_console,buf,n);
-	va_end(ap);
-}
-
-static int __initdata keep_early;
-
-static int __init setup_early_printk(char *buf)
-{
-	if (!buf)
-		return 0;
-
-	if (early_console_initialized)
-		return 0;
-	early_console_initialized = 1;
-
-	if (strstr(buf, "keep"))
-		keep_early = 1;
-
-	if (!strncmp(buf, "serial", 6)) {
-		early_serial_init(buf + 6);
-		early_console = &early_serial_console;
-	} else if (!strncmp(buf, "ttyS", 4)) {
-		early_serial_init(buf);
-		early_console = &early_serial_console;
-	} else if (!strncmp(buf, "vga", 3)
-	           && SCREEN_INFO.orig_video_isVGA == 1) {
-		max_xpos = SCREEN_INFO.orig_video_cols;
-		max_ypos = SCREEN_INFO.orig_video_lines;
-		current_ypos = SCREEN_INFO.orig_y;
-		early_console = &early_vga_console;
- 	} else if (!strncmp(buf, "simnow", 6)) {
- 		simnow_init(buf + 6);
- 		early_console = &simnow_console;
- 		keep_early = 1;
-#ifdef CONFIG_HVC_XEN
-	} else if (!strncmp(buf, "xen", 3)) {
-		early_console = &xenboot_console;
-#endif
-	}
-
-	if (keep_early)
-		early_console->flags &= ~CON_BOOT;
-	else
-		early_console->flags |= CON_BOOT;
-	register_console(early_console);
-	return 0;
-}
-early_param("earlyprintk", setup_early_printk);
diff --git a/arch/x86_64/kernel/entry_64.S b/arch/x86_64/kernel/entry_64.S
deleted file mode 100644
index 1d232e5..0000000
--- a/arch/x86_64/kernel/entry_64.S
+++ /dev/null
@@ -1,1172 +0,0 @@
-/*
- *  linux/arch/x86_64/entry.S
- *
- *  Copyright (C) 1991, 1992  Linus Torvalds
- *  Copyright (C) 2000, 2001, 2002  Andi Kleen SuSE Labs
- *  Copyright (C) 2000  Pavel Machek <pavel@suse.cz>
- */
-
-/*
- * entry.S contains the system-call and fault low-level handling routines.
- *
- * NOTE: This code handles signal-recognition, which happens every time
- * after an interrupt and after each system call.
- * 
- * Normal syscalls and interrupts don't save a full stack frame, this is 
- * only done for syscall tracing, signals or fork/exec et.al.
- * 
- * A note on terminology:	 
- * - top of stack: Architecture defined interrupt frame from SS to RIP 
- * at the top of the kernel process stack.	
- * - partial stack frame: partially saved registers upto R11.
- * - full stack frame: Like partial stack frame, but all register saved. 
- *
- * Some macro usage:
- * - CFI macros are used to generate dwarf2 unwind information for better
- * backtraces. They don't change any code.
- * - SAVE_ALL/RESTORE_ALL - Save/restore all registers
- * - SAVE_ARGS/RESTORE_ARGS - Save/restore registers that C functions modify.
- * There are unfortunately lots of special cases where some registers
- * not touched. The macro is a big mess that should be cleaned up.
- * - SAVE_REST/RESTORE_REST - Handle the registers not saved by SAVE_ARGS.
- * Gives a full stack frame.
- * - ENTRY/END Define functions in the symbol table.
- * - FIXUP_TOP_OF_STACK/RESTORE_TOP_OF_STACK - Fix up the hardware stack
- * frame that is otherwise undefined after a SYSCALL
- * - TRACE_IRQ_* - Trace hard interrupt state for lock debugging.
- * - errorentry/paranoidentry/zeroentry - Define exception entry points.
- */
-
-#include <linux/linkage.h>
-#include <asm/segment.h>
-#include <asm/cache.h>
-#include <asm/errno.h>
-#include <asm/dwarf2.h>
-#include <asm/calling.h>
-#include <asm/asm-offsets.h>
-#include <asm/msr.h>
-#include <asm/unistd.h>
-#include <asm/thread_info.h>
-#include <asm/hw_irq.h>
-#include <asm/page.h>
-#include <asm/irqflags.h>
-
-	.code64
-
-#ifndef CONFIG_PREEMPT
-#define retint_kernel retint_restore_args
-#endif	
-
-
-.macro TRACE_IRQS_IRETQ offset=ARGOFFSET
-#ifdef CONFIG_TRACE_IRQFLAGS
-	bt   $9,EFLAGS-\offset(%rsp)	/* interrupts off? */
-	jnc  1f
-	TRACE_IRQS_ON
-1:
-#endif
-.endm
-
-/*
- * C code is not supposed to know about undefined top of stack. Every time 
- * a C function with an pt_regs argument is called from the SYSCALL based 
- * fast path FIXUP_TOP_OF_STACK is needed.
- * RESTORE_TOP_OF_STACK syncs the syscall state after any possible ptregs
- * manipulation.
- */        	
-		
-	/* %rsp:at FRAMEEND */ 
-	.macro FIXUP_TOP_OF_STACK tmp
-	movq	%gs:pda_oldrsp,\tmp
-	movq  	\tmp,RSP(%rsp)
-	movq    $__USER_DS,SS(%rsp)
-	movq    $__USER_CS,CS(%rsp)
-	movq 	$-1,RCX(%rsp)
-	movq	R11(%rsp),\tmp  /* get eflags */
-	movq	\tmp,EFLAGS(%rsp)
-	.endm
-
-	.macro RESTORE_TOP_OF_STACK tmp,offset=0
-	movq   RSP-\offset(%rsp),\tmp
-	movq   \tmp,%gs:pda_oldrsp
-	movq   EFLAGS-\offset(%rsp),\tmp
-	movq   \tmp,R11-\offset(%rsp)
-	.endm
-
-	.macro FAKE_STACK_FRAME child_rip
-	/* push in order ss, rsp, eflags, cs, rip */
-	xorl %eax, %eax
-	pushq %rax /* ss */
-	CFI_ADJUST_CFA_OFFSET	8
-	/*CFI_REL_OFFSET	ss,0*/
-	pushq %rax /* rsp */
-	CFI_ADJUST_CFA_OFFSET	8
-	CFI_REL_OFFSET	rsp,0
-	pushq $(1<<9) /* eflags - interrupts on */
-	CFI_ADJUST_CFA_OFFSET	8
-	/*CFI_REL_OFFSET	rflags,0*/
-	pushq $__KERNEL_CS /* cs */
-	CFI_ADJUST_CFA_OFFSET	8
-	/*CFI_REL_OFFSET	cs,0*/
-	pushq \child_rip /* rip */
-	CFI_ADJUST_CFA_OFFSET	8
-	CFI_REL_OFFSET	rip,0
-	pushq	%rax /* orig rax */
-	CFI_ADJUST_CFA_OFFSET	8
-	.endm
-
-	.macro UNFAKE_STACK_FRAME
-	addq $8*6, %rsp
-	CFI_ADJUST_CFA_OFFSET	-(6*8)
-	.endm
-
-	.macro	CFI_DEFAULT_STACK start=1
-	.if \start
-	CFI_STARTPROC	simple
-	CFI_SIGNAL_FRAME
-	CFI_DEF_CFA	rsp,SS+8
-	.else
-	CFI_DEF_CFA_OFFSET SS+8
-	.endif
-	CFI_REL_OFFSET	r15,R15
-	CFI_REL_OFFSET	r14,R14
-	CFI_REL_OFFSET	r13,R13
-	CFI_REL_OFFSET	r12,R12
-	CFI_REL_OFFSET	rbp,RBP
-	CFI_REL_OFFSET	rbx,RBX
-	CFI_REL_OFFSET	r11,R11
-	CFI_REL_OFFSET	r10,R10
-	CFI_REL_OFFSET	r9,R9
-	CFI_REL_OFFSET	r8,R8
-	CFI_REL_OFFSET	rax,RAX
-	CFI_REL_OFFSET	rcx,RCX
-	CFI_REL_OFFSET	rdx,RDX
-	CFI_REL_OFFSET	rsi,RSI
-	CFI_REL_OFFSET	rdi,RDI
-	CFI_REL_OFFSET	rip,RIP
-	/*CFI_REL_OFFSET	cs,CS*/
-	/*CFI_REL_OFFSET	rflags,EFLAGS*/
-	CFI_REL_OFFSET	rsp,RSP
-	/*CFI_REL_OFFSET	ss,SS*/
-	.endm
-/*
- * A newly forked process directly context switches into this.
- */ 	
-/* rdi:	prev */	
-ENTRY(ret_from_fork)
-	CFI_DEFAULT_STACK
-	push kernel_eflags(%rip)
-	CFI_ADJUST_CFA_OFFSET 4
-	popf				# reset kernel eflags
-	CFI_ADJUST_CFA_OFFSET -4
-	call schedule_tail
-	GET_THREAD_INFO(%rcx)
-	testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT),threadinfo_flags(%rcx)
-	jnz rff_trace
-rff_action:	
-	RESTORE_REST
-	testl $3,CS-ARGOFFSET(%rsp)	# from kernel_thread?
-	je   int_ret_from_sys_call
-	testl $_TIF_IA32,threadinfo_flags(%rcx)
-	jnz  int_ret_from_sys_call
-	RESTORE_TOP_OF_STACK %rdi,ARGOFFSET
-	jmp ret_from_sys_call
-rff_trace:
-	movq %rsp,%rdi
-	call syscall_trace_leave
-	GET_THREAD_INFO(%rcx)	
-	jmp rff_action
-	CFI_ENDPROC
-END(ret_from_fork)
-
-/*
- * System call entry. Upto 6 arguments in registers are supported.
- *
- * SYSCALL does not save anything on the stack and does not change the
- * stack pointer.
- */
-		
-/*
- * Register setup:	
- * rax  system call number
- * rdi  arg0
- * rcx  return address for syscall/sysret, C arg3 
- * rsi  arg1
- * rdx  arg2	
- * r10  arg3 	(--> moved to rcx for C)
- * r8   arg4
- * r9   arg5
- * r11  eflags for syscall/sysret, temporary for C
- * r12-r15,rbp,rbx saved by C code, not touched. 		
- * 
- * Interrupts are off on entry.
- * Only called from user space.
- *
- * XXX	if we had a free scratch register we could save the RSP into the stack frame
- *      and report it properly in ps. Unfortunately we haven't.
- *
- * When user can change the frames always force IRET. That is because
- * it deals with uncanonical addresses better. SYSRET has trouble
- * with them due to bugs in both AMD and Intel CPUs.
- */ 			 		
-
-ENTRY(system_call)
-	CFI_STARTPROC	simple
-	CFI_SIGNAL_FRAME
-	CFI_DEF_CFA	rsp,PDA_STACKOFFSET
-	CFI_REGISTER	rip,rcx
-	/*CFI_REGISTER	rflags,r11*/
-	swapgs
-	movq	%rsp,%gs:pda_oldrsp 
-	movq	%gs:pda_kernelstack,%rsp
-	/*
-	 * No need to follow this irqs off/on section - it's straight
-	 * and short:
-	 */
-	sti					
-	SAVE_ARGS 8,1
-	movq  %rax,ORIG_RAX-ARGOFFSET(%rsp) 
-	movq  %rcx,RIP-ARGOFFSET(%rsp)
-	CFI_REL_OFFSET rip,RIP-ARGOFFSET
-	GET_THREAD_INFO(%rcx)
-	testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP),threadinfo_flags(%rcx)
-	jnz tracesys
-	cmpq $__NR_syscall_max,%rax
-	ja badsys
-	movq %r10,%rcx
-	call *sys_call_table(,%rax,8)  # XXX:	 rip relative
-	movq %rax,RAX-ARGOFFSET(%rsp)
-/*
- * Syscall return path ending with SYSRET (fast path)
- * Has incomplete stack frame and undefined top of stack. 
- */		
-ret_from_sys_call:
-	movl $_TIF_ALLWORK_MASK,%edi
-	/* edi:	flagmask */
-sysret_check:		
-	GET_THREAD_INFO(%rcx)
-	cli
-	TRACE_IRQS_OFF
-	movl threadinfo_flags(%rcx),%edx
-	andl %edi,%edx
-	jnz  sysret_careful 
-	CFI_REMEMBER_STATE
-	/*
-	 * sysretq will re-enable interrupts:
-	 */
-	TRACE_IRQS_ON
-	movq RIP-ARGOFFSET(%rsp),%rcx
-	CFI_REGISTER	rip,rcx
-	RESTORE_ARGS 0,-ARG_SKIP,1
-	/*CFI_REGISTER	rflags,r11*/
-	movq	%gs:pda_oldrsp,%rsp
-	swapgs
-	sysretq
-
-	CFI_RESTORE_STATE
-	/* Handle reschedules */
-	/* edx:	work, edi: workmask */	
-sysret_careful:
-	bt $TIF_NEED_RESCHED,%edx
-	jnc sysret_signal
-	TRACE_IRQS_ON
-	sti
-	pushq %rdi
-	CFI_ADJUST_CFA_OFFSET 8
-	call schedule
-	popq  %rdi
-	CFI_ADJUST_CFA_OFFSET -8
-	jmp sysret_check
-
-	/* Handle a signal */ 
-sysret_signal:
-	TRACE_IRQS_ON
-	sti
-	testl $(_TIF_SIGPENDING|_TIF_SINGLESTEP|_TIF_MCE_NOTIFY),%edx
-	jz    1f
-
-	/* Really a signal */
-	/* edx:	work flags (arg3) */
-	leaq do_notify_resume(%rip),%rax
-	leaq -ARGOFFSET(%rsp),%rdi # &pt_regs -> arg1
-	xorl %esi,%esi # oldset -> arg2
-	call ptregscall_common
-1:	movl $_TIF_NEED_RESCHED,%edi
-	/* Use IRET because user could have changed frame. This
-	   works because ptregscall_common has called FIXUP_TOP_OF_STACK. */
-	cli
-	TRACE_IRQS_OFF
-	jmp int_with_check
-	
-badsys:
-	movq $-ENOSYS,RAX-ARGOFFSET(%rsp)
-	jmp ret_from_sys_call
-
-	/* Do syscall tracing */
-tracesys:			 
-	SAVE_REST
-	movq $-ENOSYS,RAX(%rsp)
-	FIXUP_TOP_OF_STACK %rdi
-	movq %rsp,%rdi
-	call syscall_trace_enter
-	LOAD_ARGS ARGOFFSET  /* reload args from stack in case ptrace changed it */
-	RESTORE_REST
-	cmpq $__NR_syscall_max,%rax
-	movq $-ENOSYS,%rcx
-	cmova %rcx,%rax
-	ja  1f
-	movq %r10,%rcx	/* fixup for C */
-	call *sys_call_table(,%rax,8)
-1:	movq %rax,RAX-ARGOFFSET(%rsp)
-	/* Use IRET because user could have changed frame */
-		
-/* 
- * Syscall return path ending with IRET.
- * Has correct top of stack, but partial stack frame.
- */
-	.globl int_ret_from_sys_call
-int_ret_from_sys_call:
-	cli
-	TRACE_IRQS_OFF
-	testl $3,CS-ARGOFFSET(%rsp)
-	je retint_restore_args
-	movl $_TIF_ALLWORK_MASK,%edi
-	/* edi:	mask to check */
-int_with_check:
-	GET_THREAD_INFO(%rcx)
-	movl threadinfo_flags(%rcx),%edx
-	andl %edi,%edx
-	jnz   int_careful
-	andl    $~TS_COMPAT,threadinfo_status(%rcx)
-	jmp   retint_swapgs
-
-	/* Either reschedule or signal or syscall exit tracking needed. */
-	/* First do a reschedule test. */
-	/* edx:	work, edi: workmask */
-int_careful:
-	bt $TIF_NEED_RESCHED,%edx
-	jnc  int_very_careful
-	TRACE_IRQS_ON
-	sti
-	pushq %rdi
-	CFI_ADJUST_CFA_OFFSET 8
-	call schedule
-	popq %rdi
-	CFI_ADJUST_CFA_OFFSET -8
-	cli
-	TRACE_IRQS_OFF
-	jmp int_with_check
-
-	/* handle signals and tracing -- both require a full stack frame */
-int_very_careful:
-	TRACE_IRQS_ON
-	sti
-	SAVE_REST
-	/* Check for syscall exit trace */	
-	testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP),%edx
-	jz int_signal
-	pushq %rdi
-	CFI_ADJUST_CFA_OFFSET 8
-	leaq 8(%rsp),%rdi	# &ptregs -> arg1	
-	call syscall_trace_leave
-	popq %rdi
-	CFI_ADJUST_CFA_OFFSET -8
-	andl $~(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP),%edi
-	jmp int_restore_rest
-	
-int_signal:
-	testl $(_TIF_SIGPENDING|_TIF_SINGLESTEP|_TIF_MCE_NOTIFY),%edx
-	jz 1f
-	movq %rsp,%rdi		# &ptregs -> arg1
-	xorl %esi,%esi		# oldset -> arg2
-	call do_notify_resume
-1:	movl $_TIF_NEED_RESCHED,%edi	
-int_restore_rest:
-	RESTORE_REST
-	cli
-	TRACE_IRQS_OFF
-	jmp int_with_check
-	CFI_ENDPROC
-END(system_call)
-		
-/* 
- * Certain special system calls that need to save a complete full stack frame.
- */ 								
-	
-	.macro PTREGSCALL label,func,arg
-	.globl \label
-\label:
-	leaq	\func(%rip),%rax
-	leaq    -ARGOFFSET+8(%rsp),\arg /* 8 for return address */
-	jmp	ptregscall_common
-END(\label)
-	.endm
-
-	CFI_STARTPROC
-
-	PTREGSCALL stub_clone, sys_clone, %r8
-	PTREGSCALL stub_fork, sys_fork, %rdi
-	PTREGSCALL stub_vfork, sys_vfork, %rdi
-	PTREGSCALL stub_rt_sigsuspend, sys_rt_sigsuspend, %rdx
-	PTREGSCALL stub_sigaltstack, sys_sigaltstack, %rdx
-	PTREGSCALL stub_iopl, sys_iopl, %rsi
-
-ENTRY(ptregscall_common)
-	popq %r11
-	CFI_ADJUST_CFA_OFFSET -8
-	CFI_REGISTER rip, r11
-	SAVE_REST
-	movq %r11, %r15
-	CFI_REGISTER rip, r15
-	FIXUP_TOP_OF_STACK %r11
-	call *%rax
-	RESTORE_TOP_OF_STACK %r11
-	movq %r15, %r11
-	CFI_REGISTER rip, r11
-	RESTORE_REST
-	pushq %r11
-	CFI_ADJUST_CFA_OFFSET 8
-	CFI_REL_OFFSET rip, 0
-	ret
-	CFI_ENDPROC
-END(ptregscall_common)
-	
-ENTRY(stub_execve)
-	CFI_STARTPROC
-	popq %r11
-	CFI_ADJUST_CFA_OFFSET -8
-	CFI_REGISTER rip, r11
-	SAVE_REST
-	FIXUP_TOP_OF_STACK %r11
-	call sys_execve
-	RESTORE_TOP_OF_STACK %r11
-	movq %rax,RAX(%rsp)
-	RESTORE_REST
-	jmp int_ret_from_sys_call
-	CFI_ENDPROC
-END(stub_execve)
-	
-/*
- * sigreturn is special because it needs to restore all registers on return.
- * This cannot be done with SYSRET, so use the IRET return path instead.
- */                
-ENTRY(stub_rt_sigreturn)
-	CFI_STARTPROC
-	addq $8, %rsp
-	CFI_ADJUST_CFA_OFFSET	-8
-	SAVE_REST
-	movq %rsp,%rdi
-	FIXUP_TOP_OF_STACK %r11
-	call sys_rt_sigreturn
-	movq %rax,RAX(%rsp) # fixme, this could be done at the higher layer
-	RESTORE_REST
-	jmp int_ret_from_sys_call
-	CFI_ENDPROC
-END(stub_rt_sigreturn)
-
-/*
- * initial frame state for interrupts and exceptions
- */
-	.macro _frame ref
-	CFI_STARTPROC simple
-	CFI_SIGNAL_FRAME
-	CFI_DEF_CFA rsp,SS+8-\ref
-	/*CFI_REL_OFFSET ss,SS-\ref*/
-	CFI_REL_OFFSET rsp,RSP-\ref
-	/*CFI_REL_OFFSET rflags,EFLAGS-\ref*/
-	/*CFI_REL_OFFSET cs,CS-\ref*/
-	CFI_REL_OFFSET rip,RIP-\ref
-	.endm
-
-/* initial frame state for interrupts (and exceptions without error code) */
-#define INTR_FRAME _frame RIP
-/* initial frame state for exceptions with error code (and interrupts with
-   vector already pushed) */
-#define XCPT_FRAME _frame ORIG_RAX
-
-/* 
- * Interrupt entry/exit.
- *
- * Interrupt entry points save only callee clobbered registers in fast path.
- *	
- * Entry runs with interrupts off.	
- */ 
-
-/* 0(%rsp): interrupt number */ 
-	.macro interrupt func
-	cld
-	SAVE_ARGS
-	leaq -ARGOFFSET(%rsp),%rdi	# arg1 for handler
-	pushq %rbp
-	CFI_ADJUST_CFA_OFFSET	8
-	CFI_REL_OFFSET		rbp, 0
-	movq %rsp,%rbp
-	CFI_DEF_CFA_REGISTER	rbp
-	testl $3,CS(%rdi)
-	je 1f
-	swapgs	
-	/* irqcount is used to check if a CPU is already on an interrupt
-	   stack or not. While this is essentially redundant with preempt_count
-	   it is a little cheaper to use a separate counter in the PDA
-	   (short of moving irq_enter into assembly, which would be too
-	    much work) */
-1:	incl	%gs:pda_irqcount
-	cmoveq %gs:pda_irqstackptr,%rsp
-	push    %rbp			# backlink for old unwinder
-	/*
-	 * We entered an interrupt context - irqs are off:
-	 */
-	TRACE_IRQS_OFF
-	call \func
-	.endm
-
-ENTRY(common_interrupt)
-	XCPT_FRAME
-	interrupt do_IRQ
-	/* 0(%rsp): oldrsp-ARGOFFSET */
-ret_from_intr:
-	cli	
-	TRACE_IRQS_OFF
-	decl %gs:pda_irqcount
-	leaveq
-	CFI_DEF_CFA_REGISTER	rsp
-	CFI_ADJUST_CFA_OFFSET	-8
-exit_intr:
-	GET_THREAD_INFO(%rcx)
-	testl $3,CS-ARGOFFSET(%rsp)
-	je retint_kernel
-	
-	/* Interrupt came from user space */
-	/*
-	 * Has a correct top of stack, but a partial stack frame
-	 * %rcx: thread info. Interrupts off.
-	 */		
-retint_with_reschedule:
-	movl $_TIF_WORK_MASK,%edi
-retint_check:
-	movl threadinfo_flags(%rcx),%edx
-	andl %edi,%edx
-	CFI_REMEMBER_STATE
-	jnz  retint_careful
-retint_swapgs:	 	
-	/*
-	 * The iretq could re-enable interrupts:
-	 */
-	cli
-	TRACE_IRQS_IRETQ
-	swapgs 
-	jmp restore_args
-
-retint_restore_args:				
-	cli
-	/*
-	 * The iretq could re-enable interrupts:
-	 */
-	TRACE_IRQS_IRETQ
-restore_args:
-	RESTORE_ARGS 0,8,0						
-iret_label:	
-	iretq
-
-	.section __ex_table,"a"
-	.quad iret_label,bad_iret	
-	.previous
-	.section .fixup,"ax"
-	/* force a signal here? this matches i386 behaviour */
-	/* running with kernel gs */
-bad_iret:
-	movq $11,%rdi	/* SIGSEGV */
-	TRACE_IRQS_ON
-	sti
-	jmp do_exit			
-	.previous	
-	
-	/* edi: workmask, edx: work */
-retint_careful:
-	CFI_RESTORE_STATE
-	bt    $TIF_NEED_RESCHED,%edx
-	jnc   retint_signal
-	TRACE_IRQS_ON
-	sti
-	pushq %rdi
-	CFI_ADJUST_CFA_OFFSET	8
-	call  schedule
-	popq %rdi		
-	CFI_ADJUST_CFA_OFFSET	-8
-	GET_THREAD_INFO(%rcx)
-	cli
-	TRACE_IRQS_OFF
-	jmp retint_check
-	
-retint_signal:
-	testl $(_TIF_SIGPENDING|_TIF_SINGLESTEP|_TIF_MCE_NOTIFY),%edx
-	jz    retint_swapgs
-	TRACE_IRQS_ON
-	sti
-	SAVE_REST
-	movq $-1,ORIG_RAX(%rsp) 			
-	xorl %esi,%esi		# oldset
-	movq %rsp,%rdi		# &pt_regs
-	call do_notify_resume
-	RESTORE_REST
-	cli
-	TRACE_IRQS_OFF
-	movl $_TIF_NEED_RESCHED,%edi
-	GET_THREAD_INFO(%rcx)
-	jmp retint_check
-
-#ifdef CONFIG_PREEMPT
-	/* Returning to kernel space. Check if we need preemption */
-	/* rcx:	 threadinfo. interrupts off. */
-ENTRY(retint_kernel)
-	cmpl $0,threadinfo_preempt_count(%rcx)
-	jnz  retint_restore_args
-	bt  $TIF_NEED_RESCHED,threadinfo_flags(%rcx)
-	jnc  retint_restore_args
-	bt   $9,EFLAGS-ARGOFFSET(%rsp)	/* interrupts off? */
-	jnc  retint_restore_args
-	call preempt_schedule_irq
-	jmp exit_intr
-#endif	
-
-	CFI_ENDPROC
-END(common_interrupt)
-	
-/*
- * APIC interrupts.
- */		
-	.macro apicinterrupt num,func
-	INTR_FRAME
-	pushq $~(\num)
-	CFI_ADJUST_CFA_OFFSET 8
-	interrupt \func
-	jmp ret_from_intr
-	CFI_ENDPROC
-	.endm
-
-ENTRY(thermal_interrupt)
-	apicinterrupt THERMAL_APIC_VECTOR,smp_thermal_interrupt
-END(thermal_interrupt)
-
-ENTRY(threshold_interrupt)
-	apicinterrupt THRESHOLD_APIC_VECTOR,mce_threshold_interrupt
-END(threshold_interrupt)
-
-#ifdef CONFIG_SMP	
-ENTRY(reschedule_interrupt)
-	apicinterrupt RESCHEDULE_VECTOR,smp_reschedule_interrupt
-END(reschedule_interrupt)
-
-	.macro INVALIDATE_ENTRY num
-ENTRY(invalidate_interrupt\num)
-	apicinterrupt INVALIDATE_TLB_VECTOR_START+\num,smp_invalidate_interrupt	
-END(invalidate_interrupt\num)
-	.endm
-
-	INVALIDATE_ENTRY 0
-	INVALIDATE_ENTRY 1
-	INVALIDATE_ENTRY 2
-	INVALIDATE_ENTRY 3
-	INVALIDATE_ENTRY 4
-	INVALIDATE_ENTRY 5
-	INVALIDATE_ENTRY 6
-	INVALIDATE_ENTRY 7
-
-ENTRY(call_function_interrupt)
-	apicinterrupt CALL_FUNCTION_VECTOR,smp_call_function_interrupt
-END(call_function_interrupt)
-ENTRY(irq_move_cleanup_interrupt)
-	apicinterrupt IRQ_MOVE_CLEANUP_VECTOR,smp_irq_move_cleanup_interrupt
-END(irq_move_cleanup_interrupt)
-#endif
-
-ENTRY(apic_timer_interrupt)
-	apicinterrupt LOCAL_TIMER_VECTOR,smp_apic_timer_interrupt
-END(apic_timer_interrupt)
-
-ENTRY(error_interrupt)
-	apicinterrupt ERROR_APIC_VECTOR,smp_error_interrupt
-END(error_interrupt)
-
-ENTRY(spurious_interrupt)
-	apicinterrupt SPURIOUS_APIC_VECTOR,smp_spurious_interrupt
-END(spurious_interrupt)
-				
-/*
- * Exception entry points.
- */ 		
-	.macro zeroentry sym
-	INTR_FRAME
-	pushq $0	/* push error code/oldrax */ 
-	CFI_ADJUST_CFA_OFFSET 8
-	pushq %rax	/* push real oldrax to the rdi slot */ 
-	CFI_ADJUST_CFA_OFFSET 8
-	CFI_REL_OFFSET rax,0
-	leaq  \sym(%rip),%rax
-	jmp error_entry
-	CFI_ENDPROC
-	.endm	
-
-	.macro errorentry sym
-	XCPT_FRAME
-	pushq %rax
-	CFI_ADJUST_CFA_OFFSET 8
-	CFI_REL_OFFSET rax,0
-	leaq  \sym(%rip),%rax
-	jmp error_entry
-	CFI_ENDPROC
-	.endm
-
-	/* error code is on the stack already */
-	/* handle NMI like exceptions that can happen everywhere */
-	.macro paranoidentry sym, ist=0, irqtrace=1
-	SAVE_ALL
-	cld
-	movl $1,%ebx
-	movl  $MSR_GS_BASE,%ecx
-	rdmsr
-	testl %edx,%edx
-	js    1f
-	swapgs
-	xorl  %ebx,%ebx
-1:
-	.if \ist
-	movq	%gs:pda_data_offset, %rbp
-	.endif
-	movq %rsp,%rdi
-	movq ORIG_RAX(%rsp),%rsi
-	movq $-1,ORIG_RAX(%rsp)
-	.if \ist
-	subq	$EXCEPTION_STKSZ, per_cpu__init_tss + TSS_ist + (\ist - 1) * 8(%rbp)
-	.endif
-	call \sym
-	.if \ist
-	addq	$EXCEPTION_STKSZ, per_cpu__init_tss + TSS_ist + (\ist - 1) * 8(%rbp)
-	.endif
-	cli
-	.if \irqtrace
-	TRACE_IRQS_OFF
-	.endif
-	.endm
-
-	/*
- 	 * "Paranoid" exit path from exception stack.
-  	 * Paranoid because this is used by NMIs and cannot take
-	 * any kernel state for granted.
-	 * We don't do kernel preemption checks here, because only
-	 * NMI should be common and it does not enable IRQs and
-	 * cannot get reschedule ticks.
-	 *
-	 * "trace" is 0 for the NMI handler only, because irq-tracing
-	 * is fundamentally NMI-unsafe. (we cannot change the soft and
-	 * hard flags at once, atomically)
-	 */
-	.macro paranoidexit trace=1
-	/* ebx:	no swapgs flag */
-paranoid_exit\trace:
-	testl %ebx,%ebx				/* swapgs needed? */
-	jnz paranoid_restore\trace
-	testl $3,CS(%rsp)
-	jnz   paranoid_userspace\trace
-paranoid_swapgs\trace:
-	.if \trace
-	TRACE_IRQS_IRETQ 0
-	.endif
-	swapgs
-paranoid_restore\trace:
-	RESTORE_ALL 8
-	iretq
-paranoid_userspace\trace:
-	GET_THREAD_INFO(%rcx)
-	movl threadinfo_flags(%rcx),%ebx
-	andl $_TIF_WORK_MASK,%ebx
-	jz paranoid_swapgs\trace
-	movq %rsp,%rdi			/* &pt_regs */
-	call sync_regs
-	movq %rax,%rsp			/* switch stack for scheduling */
-	testl $_TIF_NEED_RESCHED,%ebx
-	jnz paranoid_schedule\trace
-	movl %ebx,%edx			/* arg3: thread flags */
-	.if \trace
-	TRACE_IRQS_ON
-	.endif
-	sti
-	xorl %esi,%esi 			/* arg2: oldset */
-	movq %rsp,%rdi 			/* arg1: &pt_regs */
-	call do_notify_resume
-	cli
-	.if \trace
-	TRACE_IRQS_OFF
-	.endif
-	jmp paranoid_userspace\trace
-paranoid_schedule\trace:
-	.if \trace
-	TRACE_IRQS_ON
-	.endif
-	sti
-	call schedule
-	cli
-	.if \trace
-	TRACE_IRQS_OFF
-	.endif
-	jmp paranoid_userspace\trace
-	CFI_ENDPROC
-	.endm
-
-/*
- * Exception entry point. This expects an error code/orig_rax on the stack
- * and the exception handler in %rax.	
- */ 		  				
-KPROBE_ENTRY(error_entry)
-	_frame RDI
-	CFI_REL_OFFSET rax,0
-	/* rdi slot contains rax, oldrax contains error code */
-	cld	
-	subq  $14*8,%rsp
-	CFI_ADJUST_CFA_OFFSET	(14*8)
-	movq %rsi,13*8(%rsp)
-	CFI_REL_OFFSET	rsi,RSI
-	movq 14*8(%rsp),%rsi	/* load rax from rdi slot */
-	CFI_REGISTER	rax,rsi
-	movq %rdx,12*8(%rsp)
-	CFI_REL_OFFSET	rdx,RDX
-	movq %rcx,11*8(%rsp)
-	CFI_REL_OFFSET	rcx,RCX
-	movq %rsi,10*8(%rsp)	/* store rax */ 
-	CFI_REL_OFFSET	rax,RAX
-	movq %r8, 9*8(%rsp)
-	CFI_REL_OFFSET	r8,R8
-	movq %r9, 8*8(%rsp)
-	CFI_REL_OFFSET	r9,R9
-	movq %r10,7*8(%rsp)
-	CFI_REL_OFFSET	r10,R10
-	movq %r11,6*8(%rsp)
-	CFI_REL_OFFSET	r11,R11
-	movq %rbx,5*8(%rsp) 
-	CFI_REL_OFFSET	rbx,RBX
-	movq %rbp,4*8(%rsp) 
-	CFI_REL_OFFSET	rbp,RBP
-	movq %r12,3*8(%rsp) 
-	CFI_REL_OFFSET	r12,R12
-	movq %r13,2*8(%rsp) 
-	CFI_REL_OFFSET	r13,R13
-	movq %r14,1*8(%rsp) 
-	CFI_REL_OFFSET	r14,R14
-	movq %r15,(%rsp) 
-	CFI_REL_OFFSET	r15,R15
-	xorl %ebx,%ebx	
-	testl $3,CS(%rsp)
-	je  error_kernelspace
-error_swapgs:	
-	swapgs
-error_sti:	
-	movq %rdi,RDI(%rsp) 	
-	CFI_REL_OFFSET	rdi,RDI
-	movq %rsp,%rdi
-	movq ORIG_RAX(%rsp),%rsi	/* get error code */ 
-	movq $-1,ORIG_RAX(%rsp)
-	call *%rax
-	/* ebx:	no swapgs flag (1: don't need swapgs, 0: need it) */	 
-error_exit:		
-	movl %ebx,%eax		
-	RESTORE_REST
-	cli
-	TRACE_IRQS_OFF
-	GET_THREAD_INFO(%rcx)	
-	testl %eax,%eax
-	jne  retint_kernel
-	movl  threadinfo_flags(%rcx),%edx
-	movl  $_TIF_WORK_MASK,%edi
-	andl  %edi,%edx
-	jnz  retint_careful
-	/*
-	 * The iret might restore flags:
-	 */
-	TRACE_IRQS_IRETQ
-	swapgs 
-	RESTORE_ARGS 0,8,0						
-	jmp iret_label
-	CFI_ENDPROC
-
-error_kernelspace:
-	incl %ebx
-       /* There are two places in the kernel that can potentially fault with
-          usergs. Handle them here. The exception handlers after
-	   iret run with kernel gs again, so don't set the user space flag.
-	   B stepping K8s sometimes report an truncated RIP for IRET 
-	   exceptions returning to compat mode. Check for these here too. */
-	leaq iret_label(%rip),%rbp
-	cmpq %rbp,RIP(%rsp) 
-	je   error_swapgs
-	movl %ebp,%ebp	/* zero extend */
-	cmpq %rbp,RIP(%rsp) 
-	je   error_swapgs
-	cmpq $gs_change,RIP(%rsp)
-        je   error_swapgs
-	jmp  error_sti
-KPROBE_END(error_entry)
-	
-       /* Reload gs selector with exception handling */
-       /* edi:  new selector */ 
-ENTRY(load_gs_index)
-	CFI_STARTPROC
-	pushf
-	CFI_ADJUST_CFA_OFFSET 8
-	cli
-        swapgs
-gs_change:     
-        movl %edi,%gs   
-2:	mfence		/* workaround */
-	swapgs
-        popf
-	CFI_ADJUST_CFA_OFFSET -8
-        ret
-	CFI_ENDPROC
-ENDPROC(load_gs_index)
-       
-        .section __ex_table,"a"
-        .align 8
-        .quad gs_change,bad_gs
-        .previous
-        .section .fixup,"ax"
-	/* running with kernelgs */
-bad_gs: 
-	swapgs			/* switch back to user gs */
-	xorl %eax,%eax
-        movl %eax,%gs
-        jmp  2b
-        .previous       
-	
-/*
- * Create a kernel thread.
- *
- * C extern interface:
- *	extern long kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
- *
- * asm input arguments:
- *	rdi: fn, rsi: arg, rdx: flags
- */
-ENTRY(kernel_thread)
-	CFI_STARTPROC
-	FAKE_STACK_FRAME $child_rip
-	SAVE_ALL
-
-	# rdi: flags, rsi: usp, rdx: will be &pt_regs
-	movq %rdx,%rdi
-	orq  kernel_thread_flags(%rip),%rdi
-	movq $-1, %rsi
-	movq %rsp, %rdx
-
-	xorl %r8d,%r8d
-	xorl %r9d,%r9d
-	
-	# clone now
-	call do_fork
-	movq %rax,RAX(%rsp)
-	xorl %edi,%edi
-
-	/*
-	 * It isn't worth to check for reschedule here,
-	 * so internally to the x86_64 port you can rely on kernel_thread()
-	 * not to reschedule the child before returning, this avoids the need
-	 * of hacks for example to fork off the per-CPU idle tasks.
-         * [Hopefully no generic code relies on the reschedule -AK]	
-	 */
-	RESTORE_ALL
-	UNFAKE_STACK_FRAME
-	ret
-	CFI_ENDPROC
-ENDPROC(kernel_thread)
-	
-child_rip:
-	pushq $0		# fake return address
-	CFI_STARTPROC
-	/*
-	 * Here we are in the child and the registers are set as they were
-	 * at kernel_thread() invocation in the parent.
-	 */
-	movq %rdi, %rax
-	movq %rsi, %rdi
-	call *%rax
-	# exit
-	xorl %edi, %edi
-	call do_exit
-	CFI_ENDPROC
-ENDPROC(child_rip)
-
-/*
- * execve(). This function needs to use IRET, not SYSRET, to set up all state properly.
- *
- * C extern interface:
- *	 extern long execve(char *name, char **argv, char **envp)
- *
- * asm input arguments:
- *	rdi: name, rsi: argv, rdx: envp
- *
- * We want to fallback into:
- *	extern long sys_execve(char *name, char **argv,char **envp, struct pt_regs regs)
- *
- * do_sys_execve asm fallback arguments:
- *	rdi: name, rsi: argv, rdx: envp, fake frame on the stack
- */
-ENTRY(kernel_execve)
-	CFI_STARTPROC
-	FAKE_STACK_FRAME $0
-	SAVE_ALL	
-	call sys_execve
-	movq %rax, RAX(%rsp)	
-	RESTORE_REST
-	testq %rax,%rax
-	je int_ret_from_sys_call
-	RESTORE_ARGS
-	UNFAKE_STACK_FRAME
-	ret
-	CFI_ENDPROC
-ENDPROC(kernel_execve)
-
-KPROBE_ENTRY(page_fault)
-	errorentry do_page_fault
-KPROBE_END(page_fault)
-
-ENTRY(coprocessor_error)
-	zeroentry do_coprocessor_error
-END(coprocessor_error)
-
-ENTRY(simd_coprocessor_error)
-	zeroentry do_simd_coprocessor_error	
-END(simd_coprocessor_error)
-
-ENTRY(device_not_available)
-	zeroentry math_state_restore
-END(device_not_available)
-
-	/* runs on exception stack */
-KPROBE_ENTRY(debug)
- 	INTR_FRAME
-	pushq $0
-	CFI_ADJUST_CFA_OFFSET 8		
-	paranoidentry do_debug, DEBUG_STACK
-	paranoidexit
-KPROBE_END(debug)
-
-	/* runs on exception stack */	
-KPROBE_ENTRY(nmi)
-	INTR_FRAME
-	pushq $-1
-	CFI_ADJUST_CFA_OFFSET 8
-	paranoidentry do_nmi, 0, 0
-#ifdef CONFIG_TRACE_IRQFLAGS
-	paranoidexit 0
-#else
-	jmp paranoid_exit1
- 	CFI_ENDPROC
-#endif
-KPROBE_END(nmi)
-
-KPROBE_ENTRY(int3)
- 	INTR_FRAME
- 	pushq $0
- 	CFI_ADJUST_CFA_OFFSET 8
- 	paranoidentry do_int3, DEBUG_STACK
- 	jmp paranoid_exit1
- 	CFI_ENDPROC
-KPROBE_END(int3)
-
-ENTRY(overflow)
-	zeroentry do_overflow
-END(overflow)
-
-ENTRY(bounds)
-	zeroentry do_bounds
-END(bounds)
-
-ENTRY(invalid_op)
-	zeroentry do_invalid_op	
-END(invalid_op)
-
-ENTRY(coprocessor_segment_overrun)
-	zeroentry do_coprocessor_segment_overrun
-END(coprocessor_segment_overrun)
-
-ENTRY(reserved)
-	zeroentry do_reserved
-END(reserved)
-
-	/* runs on exception stack */
-ENTRY(double_fault)
-	XCPT_FRAME
-	paranoidentry do_double_fault
-	jmp paranoid_exit1
-	CFI_ENDPROC
-END(double_fault)
-
-ENTRY(invalid_TSS)
-	errorentry do_invalid_TSS
-END(invalid_TSS)
-
-ENTRY(segment_not_present)
-	errorentry do_segment_not_present
-END(segment_not_present)
-
-	/* runs on exception stack */
-ENTRY(stack_segment)
-	XCPT_FRAME
-	paranoidentry do_stack_segment
-	jmp paranoid_exit1
-	CFI_ENDPROC
-END(stack_segment)
-
-KPROBE_ENTRY(general_protection)
-	errorentry do_general_protection
-KPROBE_END(general_protection)
-
-ENTRY(alignment_check)
-	errorentry do_alignment_check
-END(alignment_check)
-
-ENTRY(divide_error)
-	zeroentry do_divide_error
-END(divide_error)
-
-ENTRY(spurious_interrupt_bug)
-	zeroentry do_spurious_interrupt_bug
-END(spurious_interrupt_bug)
-
-#ifdef CONFIG_X86_MCE
-	/* runs on exception stack */
-ENTRY(machine_check)
-	INTR_FRAME
-	pushq $0
-	CFI_ADJUST_CFA_OFFSET 8	
-	paranoidentry do_machine_check
-	jmp paranoid_exit1
-	CFI_ENDPROC
-END(machine_check)
-#endif
-
-/* Call softirq on interrupt stack. Interrupts are off. */
-ENTRY(call_softirq)
-	CFI_STARTPROC
-	push %rbp
-	CFI_ADJUST_CFA_OFFSET	8
-	CFI_REL_OFFSET rbp,0
-	mov  %rsp,%rbp
-	CFI_DEF_CFA_REGISTER rbp
-	incl %gs:pda_irqcount
-	cmove %gs:pda_irqstackptr,%rsp
-	push  %rbp			# backlink for old unwinder
-	call __do_softirq
-	leaveq
-	CFI_DEF_CFA_REGISTER	rsp
-	CFI_ADJUST_CFA_OFFSET   -8
-	decl %gs:pda_irqcount
-	ret
-	CFI_ENDPROC
-ENDPROC(call_softirq)
-
-KPROBE_ENTRY(ignore_sysret)
-	CFI_STARTPROC
-	mov $-ENOSYS,%eax
-	sysret
-	CFI_ENDPROC
-ENDPROC(ignore_sysret)
diff --git a/arch/x86_64/kernel/genapic_64.c b/arch/x86_64/kernel/genapic_64.c
deleted file mode 100644
index 47496a4..0000000
--- a/arch/x86_64/kernel/genapic_64.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * Copyright 2004 James Cleverdon, IBM.
- * Subject to the GNU Public License, v.2
- *
- * Generic APIC sub-arch probe layer.
- *
- * Hacked for x86-64 by James Cleverdon from i386 architecture code by
- * Martin Bligh, Andi Kleen, James Bottomley, John Stultz, and
- * James Cleverdon.
- */
-#include <linux/threads.h>
-#include <linux/cpumask.h>
-#include <linux/string.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/ctype.h>
-#include <linux/init.h>
-
-#include <asm/smp.h>
-#include <asm/ipi.h>
-#include <asm/genapic.h>
-
-#ifdef CONFIG_ACPI
-#include <acpi/acpi_bus.h>
-#endif
-
-/* which logical CPU number maps to which CPU (physical APIC ID) */
-u8 x86_cpu_to_apicid[NR_CPUS] __read_mostly
-					= { [0 ... NR_CPUS-1] = BAD_APICID };
-EXPORT_SYMBOL(x86_cpu_to_apicid);
-
-u8 x86_cpu_to_log_apicid[NR_CPUS]	= { [0 ... NR_CPUS-1] = BAD_APICID };
-
-struct genapic __read_mostly *genapic = &apic_flat;
-
-/*
- * Check the APIC IDs in bios_cpu_apicid and choose the APIC mode.
- */
-void __init setup_apic_routing(void)
-{
-#ifdef CONFIG_ACPI
-	/*
-	 * Quirk: some x86_64 machines can only use physical APIC mode
-	 * regardless of how many processors are present (x86_64 ES7000
-	 * is an example).
-	 */
-	if (acpi_gbl_FADT.header.revision > FADT2_REVISION_ID &&
-			(acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL))
-		genapic = &apic_physflat;
-	else
-#endif
-
-	if (cpus_weight(cpu_possible_map) <= 8)
-		genapic = &apic_flat;
-	else
-		genapic = &apic_physflat;
-
-	printk(KERN_INFO "Setting APIC routing to %s\n", genapic->name);
-}
-
-/* Same for both flat and physical. */
-
-void send_IPI_self(int vector)
-{
-	__send_IPI_shortcut(APIC_DEST_SELF, vector, APIC_DEST_PHYSICAL);
-}
diff --git a/arch/x86_64/kernel/genapic_flat_64.c b/arch/x86_64/kernel/genapic_flat_64.c
deleted file mode 100644
index ecb01ee..0000000
--- a/arch/x86_64/kernel/genapic_flat_64.c
+++ /dev/null
@@ -1,194 +0,0 @@
-/*
- * Copyright 2004 James Cleverdon, IBM.
- * Subject to the GNU Public License, v.2
- *
- * Flat APIC subarch code.
- *
- * Hacked for x86-64 by James Cleverdon from i386 architecture code by
- * Martin Bligh, Andi Kleen, James Bottomley, John Stultz, and
- * James Cleverdon.
- */
-#include <linux/errno.h>
-#include <linux/threads.h>
-#include <linux/cpumask.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/ctype.h>
-#include <linux/init.h>
-#include <asm/smp.h>
-#include <asm/ipi.h>
-#include <asm/genapic.h>
-
-static cpumask_t flat_target_cpus(void)
-{
-	return cpu_online_map;
-}
-
-static cpumask_t flat_vector_allocation_domain(int cpu)
-{
-	/* Careful. Some cpus do not strictly honor the set of cpus
-	 * specified in the interrupt destination when using lowest
-	 * priority interrupt delivery mode.
-	 *
-	 * In particular there was a hyperthreading cpu observed to
-	 * deliver interrupts to the wrong hyperthread when only one
-	 * hyperthread was specified in the interrupt desitination.
-	 */
-	cpumask_t domain = { { [0] = APIC_ALL_CPUS, } };
-	return domain;
-}
-
-/*
- * Set up the logical destination ID.
- *
- * Intel recommends to set DFR, LDR and TPR before enabling
- * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
- * document number 292116).  So here it goes...
- */
-static void flat_init_apic_ldr(void)
-{
-	unsigned long val;
-	unsigned long num, id;
-
-	num = smp_processor_id();
-	id = 1UL << num;
-	x86_cpu_to_log_apicid[num] = id;
-	apic_write(APIC_DFR, APIC_DFR_FLAT);
-	val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
-	val |= SET_APIC_LOGICAL_ID(id);
-	apic_write(APIC_LDR, val);
-}
-
-static void flat_send_IPI_mask(cpumask_t cpumask, int vector)
-{
-	unsigned long mask = cpus_addr(cpumask)[0];
-	unsigned long flags;
-
-	local_irq_save(flags);
-	__send_IPI_dest_field(mask, vector, APIC_DEST_LOGICAL);
-	local_irq_restore(flags);
-}
-
-static void flat_send_IPI_allbutself(int vector)
-{
-#ifdef	CONFIG_HOTPLUG_CPU
-	int hotplug = 1;
-#else
-	int hotplug = 0;
-#endif
-	if (hotplug || vector == NMI_VECTOR) {
-		cpumask_t allbutme = cpu_online_map;
-
-		cpu_clear(smp_processor_id(), allbutme);
-
-		if (!cpus_empty(allbutme))
-			flat_send_IPI_mask(allbutme, vector);
-	} else if (num_online_cpus() > 1) {
-		__send_IPI_shortcut(APIC_DEST_ALLBUT, vector,APIC_DEST_LOGICAL);
-	}
-}
-
-static void flat_send_IPI_all(int vector)
-{
-	if (vector == NMI_VECTOR)
-		flat_send_IPI_mask(cpu_online_map, vector);
-	else
-		__send_IPI_shortcut(APIC_DEST_ALLINC, vector, APIC_DEST_LOGICAL);
-}
-
-static int flat_apic_id_registered(void)
-{
-	return physid_isset(GET_APIC_ID(apic_read(APIC_ID)), phys_cpu_present_map);
-}
-
-static unsigned int flat_cpu_mask_to_apicid(cpumask_t cpumask)
-{
-	return cpus_addr(cpumask)[0] & APIC_ALL_CPUS;
-}
-
-static unsigned int phys_pkg_id(int index_msb)
-{
-	return hard_smp_processor_id() >> index_msb;
-}
-
-struct genapic apic_flat =  {
-	.name = "flat",
-	.int_delivery_mode = dest_LowestPrio,
-	.int_dest_mode = (APIC_DEST_LOGICAL != 0),
-	.target_cpus = flat_target_cpus,
-	.vector_allocation_domain = flat_vector_allocation_domain,
-	.apic_id_registered = flat_apic_id_registered,
-	.init_apic_ldr = flat_init_apic_ldr,
-	.send_IPI_all = flat_send_IPI_all,
-	.send_IPI_allbutself = flat_send_IPI_allbutself,
-	.send_IPI_mask = flat_send_IPI_mask,
-	.cpu_mask_to_apicid = flat_cpu_mask_to_apicid,
-	.phys_pkg_id = phys_pkg_id,
-};
-
-/*
- * Physflat mode is used when there are more than 8 CPUs on a AMD system.
- * We cannot use logical delivery in this case because the mask
- * overflows, so use physical mode.
- */
-
-static cpumask_t physflat_target_cpus(void)
-{
-	return cpu_online_map;
-}
-
-static cpumask_t physflat_vector_allocation_domain(int cpu)
-{
-	cpumask_t domain = CPU_MASK_NONE;
-	cpu_set(cpu, domain);
-	return domain;
-}
-
-
-static void physflat_send_IPI_mask(cpumask_t cpumask, int vector)
-{
-	send_IPI_mask_sequence(cpumask, vector);
-}
-
-static void physflat_send_IPI_allbutself(int vector)
-{
-	cpumask_t allbutme = cpu_online_map;
-
-	cpu_clear(smp_processor_id(), allbutme);
-	physflat_send_IPI_mask(allbutme, vector);
-}
-
-static void physflat_send_IPI_all(int vector)
-{
-	physflat_send_IPI_mask(cpu_online_map, vector);
-}
-
-static unsigned int physflat_cpu_mask_to_apicid(cpumask_t cpumask)
-{
-	int cpu;
-
-	/*
-	 * We're using fixed IRQ delivery, can only return one phys APIC ID.
-	 * May as well be the first.
-	 */
-	cpu = first_cpu(cpumask);
-	if ((unsigned)cpu < NR_CPUS)
-		return x86_cpu_to_apicid[cpu];
-	else
-		return BAD_APICID;
-}
-
-struct genapic apic_physflat =  {
-	.name = "physical flat",
-	.int_delivery_mode = dest_Fixed,
-	.int_dest_mode = (APIC_DEST_PHYSICAL != 0),
-	.target_cpus = physflat_target_cpus,
-	.vector_allocation_domain = physflat_vector_allocation_domain,
-	.apic_id_registered = flat_apic_id_registered,
-	.init_apic_ldr = flat_init_apic_ldr,/*not needed, but shouldn't hurt*/
-	.send_IPI_all = physflat_send_IPI_all,
-	.send_IPI_allbutself = physflat_send_IPI_allbutself,
-	.send_IPI_mask = physflat_send_IPI_mask,
-	.cpu_mask_to_apicid = physflat_cpu_mask_to_apicid,
-	.phys_pkg_id = phys_pkg_id,
-};
diff --git a/arch/x86_64/kernel/head64.c b/arch/x86_64/kernel/head64.c
deleted file mode 100644
index 6c34bdd..0000000
--- a/arch/x86_64/kernel/head64.c
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- *  linux/arch/x86_64/kernel/head64.c -- prepare to run common code
- *
- *  Copyright (C) 2000 Andrea Arcangeli <andrea@suse.de> SuSE
- */
-
-#include <linux/init.h>
-#include <linux/linkage.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/percpu.h>
-
-#include <asm/processor.h>
-#include <asm/proto.h>
-#include <asm/smp.h>
-#include <asm/bootsetup.h>
-#include <asm/setup.h>
-#include <asm/desc.h>
-#include <asm/pgtable.h>
-#include <asm/tlbflush.h>
-#include <asm/sections.h>
-
-static void __init zap_identity_mappings(void)
-{
-	pgd_t *pgd = pgd_offset_k(0UL);
-	pgd_clear(pgd);
-	__flush_tlb();
-}
-
-/* Don't add a printk in there. printk relies on the PDA which is not initialized 
-   yet. */
-static void __init clear_bss(void)
-{
-	memset(__bss_start, 0,
-	       (unsigned long) __bss_stop - (unsigned long) __bss_start);
-}
-
-#define NEW_CL_POINTER		0x228	/* Relative to real mode data */
-#define OLD_CL_MAGIC_ADDR	0x20
-#define OLD_CL_MAGIC            0xA33F
-#define OLD_CL_OFFSET           0x22
-
-static void __init copy_bootdata(char *real_mode_data)
-{
-	unsigned long new_data;
-	char * command_line;
-
-	memcpy(x86_boot_params, real_mode_data, BOOT_PARAM_SIZE);
-	new_data = *(u32 *) (x86_boot_params + NEW_CL_POINTER);
-	if (!new_data) {
-		if (OLD_CL_MAGIC != *(u16 *)(real_mode_data + OLD_CL_MAGIC_ADDR)) {
-			return;
-		}
-		new_data = __pa(real_mode_data) + *(u16 *)(real_mode_data + OLD_CL_OFFSET);
-	}
-	command_line = __va(new_data);
-	memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
-}
-
-void __init x86_64_start_kernel(char * real_mode_data)
-{
-	int i;
-
-	/* clear bss before set_intr_gate with early_idt_handler */
-	clear_bss();
-
-	/* Make NULL pointers segfault */
-	zap_identity_mappings();
-
-	for (i = 0; i < IDT_ENTRIES; i++)
-		set_intr_gate(i, early_idt_handler);
-	asm volatile("lidt %0" :: "m" (idt_descr));
-
-	early_printk("Kernel alive\n");
-
- 	for (i = 0; i < NR_CPUS; i++)
- 		cpu_pda(i) = &boot_cpu_pda[i];
-
-	pda_init(0);
-	copy_bootdata(__va(real_mode_data));
-#ifdef CONFIG_SMP
-	cpu_set(0, cpu_online_map);
-#endif
-	start_kernel();
-}
diff --git a/arch/x86_64/kernel/head_64.S b/arch/x86_64/kernel/head_64.S
deleted file mode 100644
index b6167fe..0000000
--- a/arch/x86_64/kernel/head_64.S
+++ /dev/null
@@ -1,416 +0,0 @@
-/*
- *  linux/arch/x86_64/kernel/head.S -- start in 32bit and switch to 64bit
- *
- *  Copyright (C) 2000 Andrea Arcangeli <andrea@suse.de> SuSE
- *  Copyright (C) 2000 Pavel Machek <pavel@suse.cz>
- *  Copyright (C) 2000 Karsten Keil <kkeil@suse.de>
- *  Copyright (C) 2001,2002 Andi Kleen <ak@suse.de>
- *  Copyright (C) 2005 Eric Biederman <ebiederm@xmission.com>
- */
-
-
-#include <linux/linkage.h>
-#include <linux/threads.h>
-#include <linux/init.h>
-#include <asm/desc.h>
-#include <asm/segment.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/msr.h>
-#include <asm/cache.h>
-
-/* we are not able to switch in one step to the final KERNEL ADRESS SPACE
- * because we need identity-mapped pages.
- *
- */
-
-	.text
-	.section .text.head
-	.code64
-	.globl startup_64
-startup_64:
-
-	/*
-	 * At this point the CPU runs in 64bit mode CS.L = 1 CS.D = 1,
-	 * and someone has loaded an identity mapped page table
-	 * for us.  These identity mapped page tables map all of the
-	 * kernel pages and possibly all of memory.
-	 *
-	 * %esi holds a physical pointer to real_mode_data.
-	 *
-	 * We come here either directly from a 64bit bootloader, or from
-	 * arch/x86_64/boot/compressed/head.S.
-	 *
-	 * We only come here initially at boot nothing else comes here.
-	 *
-	 * Since we may be loaded at an address different from what we were
-	 * compiled to run at we first fixup the physical addresses in our page
-	 * tables and then reload them.
-	 */
-
-	/* Compute the delta between the address I am compiled to run at and the
-	 * address I am actually running at.
-	 */
-	leaq	_text(%rip), %rbp
-	subq	$_text - __START_KERNEL_map, %rbp
-
-	/* Is the address not 2M aligned? */
-	movq	%rbp, %rax
-	andl	$~LARGE_PAGE_MASK, %eax
-	testl	%eax, %eax
-	jnz	bad_address
-
-	/* Is the address too large? */
-	leaq	_text(%rip), %rdx
-	movq	$PGDIR_SIZE, %rax
-	cmpq	%rax, %rdx
-	jae	bad_address
-
-	/* Fixup the physical addresses in the page table
-	 */
-	addq	%rbp, init_level4_pgt + 0(%rip)
-	addq	%rbp, init_level4_pgt + (258*8)(%rip)
-	addq	%rbp, init_level4_pgt + (511*8)(%rip)
-
-	addq	%rbp, level3_ident_pgt + 0(%rip)
-
-	addq	%rbp, level3_kernel_pgt + (510*8)(%rip)
-	addq	%rbp, level3_kernel_pgt + (511*8)(%rip)
-
-	addq	%rbp, level2_fixmap_pgt + (506*8)(%rip)
-
-	/* Add an Identity mapping if I am above 1G */
-	leaq	_text(%rip), %rdi
-	andq	$LARGE_PAGE_MASK, %rdi
-
-	movq	%rdi, %rax
-	shrq	$PUD_SHIFT, %rax
-	andq	$(PTRS_PER_PUD - 1), %rax
-	jz	ident_complete
-
-	leaq	(level2_spare_pgt - __START_KERNEL_map + _KERNPG_TABLE)(%rbp), %rdx
-	leaq	level3_ident_pgt(%rip), %rbx
-	movq	%rdx, 0(%rbx, %rax, 8)
-
-	movq	%rdi, %rax
-	shrq	$PMD_SHIFT, %rax
-	andq	$(PTRS_PER_PMD - 1), %rax
-	leaq	__PAGE_KERNEL_LARGE_EXEC(%rdi), %rdx
-	leaq	level2_spare_pgt(%rip), %rbx
-	movq	%rdx, 0(%rbx, %rax, 8)
-ident_complete:
-
-	/* Fixup the kernel text+data virtual addresses
-	 */
-	leaq	level2_kernel_pgt(%rip), %rdi
-	leaq	4096(%rdi), %r8
-	/* See if it is a valid page table entry */
-1:	testq	$1, 0(%rdi)
-	jz	2f
-	addq	%rbp, 0(%rdi)
-	/* Go to the next page */
-2:	addq	$8, %rdi
-	cmp	%r8, %rdi
-	jne	1b
-
-	/* Fixup phys_base */
-	addq	%rbp, phys_base(%rip)
-
-#ifdef CONFIG_SMP
-	addq	%rbp, trampoline_level4_pgt + 0(%rip)
-	addq	%rbp, trampoline_level4_pgt + (511*8)(%rip)
-#endif
-#ifdef CONFIG_ACPI_SLEEP
-	addq	%rbp, wakeup_level4_pgt + 0(%rip)
-	addq	%rbp, wakeup_level4_pgt + (511*8)(%rip)
-#endif
-
-	/* Due to ENTRY(), sometimes the empty space gets filled with
-	 * zeros. Better take a jmp than relying on empty space being
-	 * filled with 0x90 (nop)
-	 */
-	jmp secondary_startup_64
-ENTRY(secondary_startup_64)
-	/*
-	 * At this point the CPU runs in 64bit mode CS.L = 1 CS.D = 1,
-	 * and someone has loaded a mapped page table.
-	 *
-	 * %esi holds a physical pointer to real_mode_data.
-	 *
-	 * We come here either from startup_64 (using physical addresses)
-	 * or from trampoline.S (using virtual addresses).
-	 *
-	 * Using virtual addresses from trampoline.S removes the need
-	 * to have any identity mapped pages in the kernel page table
-	 * after the boot processor executes this code.
-	 */
-
-	/* Enable PAE mode and PGE */
-	xorq	%rax, %rax
-	btsq	$5, %rax
-	btsq	$7, %rax
-	movq	%rax, %cr4
-
-	/* Setup early boot stage 4 level pagetables. */
-	movq	$(init_level4_pgt - __START_KERNEL_map), %rax
-	addq	phys_base(%rip), %rax
-	movq	%rax, %cr3
-
-	/* Ensure I am executing from virtual addresses */
-	movq	$1f, %rax
-	jmp	*%rax
-1:
-
-	/* Check if nx is implemented */
-	movl	$0x80000001, %eax
-	cpuid
-	movl	%edx,%edi
-
-	/* Setup EFER (Extended Feature Enable Register) */
-	movl	$MSR_EFER, %ecx
-	rdmsr
-	btsl	$_EFER_SCE, %eax	/* Enable System Call */
-	btl	$20,%edi		/* No Execute supported? */
-	jnc     1f
-	btsl	$_EFER_NX, %eax
-1:	wrmsr				/* Make changes effective */
-
-	/* Setup cr0 */
-#define CR0_PM				1		/* protected mode */
-#define CR0_MP				(1<<1)
-#define CR0_ET				(1<<4)
-#define CR0_NE				(1<<5)
-#define CR0_WP				(1<<16)
-#define CR0_AM				(1<<18)
-#define CR0_PAGING 			(1<<31)
-	movl $CR0_PM|CR0_MP|CR0_ET|CR0_NE|CR0_WP|CR0_AM|CR0_PAGING,%eax
-	/* Make changes effective */
-	movq	%rax, %cr0
-
-	/* Setup a boot time stack */
-	movq init_rsp(%rip),%rsp
-
-	/* zero EFLAGS after setting rsp */
-	pushq $0
-	popfq
-
-	/*
-	 * We must switch to a new descriptor in kernel space for the GDT
-	 * because soon the kernel won't have access anymore to the userspace
-	 * addresses where we're currently running on. We have to do that here
-	 * because in 32bit we couldn't load a 64bit linear address.
-	 */
-	lgdt	cpu_gdt_descr(%rip)
-
-	/* set up data segments. actually 0 would do too */
-	movl $__KERNEL_DS,%eax
-	movl %eax,%ds
-	movl %eax,%ss
-	movl %eax,%es
-
-	/*
-	 * We don't really need to load %fs or %gs, but load them anyway
-	 * to kill any stale realmode selectors.  This allows execution
-	 * under VT hardware.
-	 */
-	movl %eax,%fs
-	movl %eax,%gs
-
-	/* 
-	 * Setup up a dummy PDA. this is just for some early bootup code
-	 * that does in_interrupt() 
-	 */ 
-	movl	$MSR_GS_BASE,%ecx
-	movq	$empty_zero_page,%rax
-	movq    %rax,%rdx
-	shrq	$32,%rdx
-	wrmsr	
-
-	/* esi is pointer to real mode structure with interesting info.
-	   pass it to C */
-	movl	%esi, %edi
-	
-	/* Finally jump to run C code and to be on real kernel address
-	 * Since we are running on identity-mapped space we have to jump
-	 * to the full 64bit address, this is only possible as indirect
-	 * jump.  In addition we need to ensure %cs is set so we make this
-	 * a far return.
-	 */
-	movq	initial_code(%rip),%rax
-	pushq	$0		# fake return address to stop unwinder
-	pushq	$__KERNEL_CS	# set correct cs
-	pushq	%rax		# target address in negative space
-	lretq
-
-	/* SMP bootup changes these two */
-#ifndef CONFIG_HOTPLUG_CPU
-	.pushsection .init.data
-#endif
-	.align	8
-	.globl	initial_code
-initial_code:
-	.quad	x86_64_start_kernel
-#ifndef CONFIG_HOTPLUG_CPU
-	.popsection
-#endif
-	.globl init_rsp
-init_rsp:
-	.quad  init_thread_union+THREAD_SIZE-8
-
-bad_address:
-	jmp bad_address
-
-ENTRY(early_idt_handler)
-	cmpl $2,early_recursion_flag(%rip)
-	jz  1f
-	incl early_recursion_flag(%rip)
-	xorl %eax,%eax
-	movq 8(%rsp),%rsi	# get rip
-	movq (%rsp),%rdx
-	movq %cr2,%rcx
-	leaq early_idt_msg(%rip),%rdi
-	call early_printk
-	cmpl $2,early_recursion_flag(%rip)
-	jz  1f
-	call dump_stack
-#ifdef CONFIG_KALLSYMS	
-	leaq early_idt_ripmsg(%rip),%rdi
-	movq 8(%rsp),%rsi	# get rip again
-	call __print_symbol
-#endif
-1:	hlt
-	jmp 1b
-early_recursion_flag:
-	.long 0
-
-early_idt_msg:
-	.asciz "PANIC: early exception rip %lx error %lx cr2 %lx\n"
-early_idt_ripmsg:
-	.asciz "RIP %s\n"
-
-.balign PAGE_SIZE
-
-#define NEXT_PAGE(name) \
-	.balign	PAGE_SIZE; \
-ENTRY(name)
-
-/* Automate the creation of 1 to 1 mapping pmd entries */
-#define PMDS(START, PERM, COUNT)		\
-	i = 0 ;					\
-	.rept (COUNT) ;				\
-	.quad	(START) + (i << 21) + (PERM) ;	\
-	i = i + 1 ;				\
-	.endr
-
-	/*
-	 * This default setting generates an ident mapping at address 0x100000
-	 * and a mapping for the kernel that precisely maps virtual address
-	 * 0xffffffff80000000 to physical address 0x000000. (always using
-	 * 2Mbyte large pages provided by PAE mode)
-	 */
-NEXT_PAGE(init_level4_pgt)
-	.quad	level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE
-	.fill	257,8,0
-	.quad	level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE
-	.fill	252,8,0
-	/* (2^48-(2*1024*1024*1024))/(2^39) = 511 */
-	.quad	level3_kernel_pgt - __START_KERNEL_map + _PAGE_TABLE
-
-NEXT_PAGE(level3_ident_pgt)
-	.quad	level2_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE
-	.fill	511,8,0
-
-NEXT_PAGE(level3_kernel_pgt)
-	.fill	510,8,0
-	/* (2^48-(2*1024*1024*1024)-((2^39)*511))/(2^30) = 510 */
-	.quad	level2_kernel_pgt - __START_KERNEL_map + _KERNPG_TABLE
-	.quad	level2_fixmap_pgt - __START_KERNEL_map + _PAGE_TABLE
-
-NEXT_PAGE(level2_fixmap_pgt)
-	.fill	506,8,0
-	.quad	level1_fixmap_pgt - __START_KERNEL_map + _PAGE_TABLE
-	/* 8MB reserved for vsyscalls + a 2MB hole = 4 + 1 entries */
-	.fill	5,8,0
-
-NEXT_PAGE(level1_fixmap_pgt)
-	.fill	512,8,0
-
-NEXT_PAGE(level2_ident_pgt)
-	/* Since I easily can, map the first 1G.
-	 * Don't set NX because code runs from these pages.
-	 */
-	PMDS(0x0000000000000000, __PAGE_KERNEL_LARGE_EXEC, PTRS_PER_PMD)
-
-NEXT_PAGE(level2_kernel_pgt)
-	/* 40MB kernel mapping. The kernel code cannot be bigger than that.
-	   When you change this change KERNEL_TEXT_SIZE in page.h too. */
-	/* (2^48-(2*1024*1024*1024)-((2^39)*511)-((2^30)*510)) = 0 */
-	PMDS(0x0000000000000000, __PAGE_KERNEL_LARGE_EXEC|_PAGE_GLOBAL, KERNEL_TEXT_SIZE/PMD_SIZE)
-	/* Module mapping starts here */
-	.fill	(PTRS_PER_PMD - (KERNEL_TEXT_SIZE/PMD_SIZE)),8,0
-
-NEXT_PAGE(level2_spare_pgt)
-	.fill   512,8,0
-
-#undef PMDS
-#undef NEXT_PAGE
-
-	.data
-	.align 16
-	.globl cpu_gdt_descr
-cpu_gdt_descr:
-	.word	gdt_end-cpu_gdt_table-1
-gdt:
-	.quad	cpu_gdt_table
-#ifdef CONFIG_SMP
-	.rept	NR_CPUS-1
-	.word	0
-	.quad	0
-	.endr
-#endif
-
-ENTRY(phys_base)
-	/* This must match the first entry in level2_kernel_pgt */
-	.quad   0x0000000000000000
-
-/* We need valid kernel segments for data and code in long mode too
- * IRET will check the segment types  kkeil 2000/10/28
- * Also sysret mandates a special GDT layout 
- */
-		 		
-	.section .data.page_aligned, "aw"
-	.align PAGE_SIZE
-
-/* The TLS descriptors are currently at a different place compared to i386.
-   Hopefully nobody expects them at a fixed place (Wine?) */
-	
-ENTRY(cpu_gdt_table)
-	.quad	0x0000000000000000	/* NULL descriptor */
-	.quad	0x00cf9b000000ffff	/* __KERNEL32_CS */
-	.quad	0x00af9b000000ffff	/* __KERNEL_CS */
-	.quad	0x00cf93000000ffff	/* __KERNEL_DS */
-	.quad	0x00cffb000000ffff	/* __USER32_CS */
-	.quad	0x00cff3000000ffff	/* __USER_DS, __USER32_DS  */
-	.quad	0x00affb000000ffff	/* __USER_CS */
-	.quad	0x0			/* unused */
-	.quad	0,0			/* TSS */
-	.quad	0,0			/* LDT */
-	.quad   0,0,0			/* three TLS descriptors */ 
-	.quad	0x0000f40000000000	/* node/CPU stored in limit */
-gdt_end:	
-	/* asm/segment.h:GDT_ENTRIES must match this */	
-	/* This should be a multiple of the cache line size */
-	/* GDTs of other CPUs are now dynamically allocated */
-
-	/* zero the remaining page */
-	.fill PAGE_SIZE / 8 - GDT_ENTRIES,8,0
-
-	.section .bss, "aw", @nobits
-	.align L1_CACHE_BYTES
-ENTRY(idt_table)
-	.skip 256 * 16
-
-	.section .bss.page_aligned, "aw", @nobits
-	.align PAGE_SIZE
-ENTRY(empty_zero_page)
-	.skip PAGE_SIZE
diff --git a/arch/x86_64/kernel/hpet_64.c b/arch/x86_64/kernel/hpet_64.c
deleted file mode 100644
index e2d1b91..0000000
--- a/arch/x86_64/kernel/hpet_64.c
+++ /dev/null
@@ -1,493 +0,0 @@
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/mc146818rtc.h>
-#include <linux/time.h>
-#include <linux/clocksource.h>
-#include <linux/ioport.h>
-#include <linux/acpi.h>
-#include <linux/hpet.h>
-#include <asm/pgtable.h>
-#include <asm/vsyscall.h>
-#include <asm/timex.h>
-#include <asm/hpet.h>
-
-#define HPET_MASK	0xFFFFFFFF
-#define HPET_SHIFT	22
-
-/* FSEC = 10^-15 NSEC = 10^-9 */
-#define FSEC_PER_NSEC	1000000
-
-int nohpet __initdata;
-
-unsigned long hpet_address;
-unsigned long hpet_period;	/* fsecs / HPET clock */
-unsigned long hpet_tick;	/* HPET clocks / interrupt */
-
-int hpet_use_timer;		/* Use counter of hpet for time keeping,
-				 * otherwise PIT
-				 */
-
-#ifdef	CONFIG_HPET
-static __init int late_hpet_init(void)
-{
-	struct hpet_data	hd;
-	unsigned int 		ntimer;
-
-	if (!hpet_address)
-        	return 0;
-
-	memset(&hd, 0, sizeof(hd));
-
-	ntimer = hpet_readl(HPET_ID);
-	ntimer = (ntimer & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT;
-	ntimer++;
-
-	/*
-	 * Register with driver.
-	 * Timer0 and Timer1 is used by platform.
-	 */
-	hd.hd_phys_address = hpet_address;
-	hd.hd_address = (void __iomem *)fix_to_virt(FIX_HPET_BASE);
-	hd.hd_nirqs = ntimer;
-	hd.hd_flags = HPET_DATA_PLATFORM;
-	hpet_reserve_timer(&hd, 0);
-#ifdef	CONFIG_HPET_EMULATE_RTC
-	hpet_reserve_timer(&hd, 1);
-#endif
-	hd.hd_irq[0] = HPET_LEGACY_8254;
-	hd.hd_irq[1] = HPET_LEGACY_RTC;
-	if (ntimer > 2) {
-		struct hpet		*hpet;
-		struct hpet_timer	*timer;
-		int			i;
-
-		hpet = (struct hpet *) fix_to_virt(FIX_HPET_BASE);
-		timer = &hpet->hpet_timers[2];
-		for (i = 2; i < ntimer; timer++, i++)
-			hd.hd_irq[i] = (timer->hpet_config &
-					Tn_INT_ROUTE_CNF_MASK) >>
-				Tn_INT_ROUTE_CNF_SHIFT;
-
-	}
-
-	hpet_alloc(&hd);
-	return 0;
-}
-fs_initcall(late_hpet_init);
-#endif
-
-int hpet_timer_stop_set_go(unsigned long tick)
-{
-	unsigned int cfg;
-
-/*
- * Stop the timers and reset the main counter.
- */
-
-	cfg = hpet_readl(HPET_CFG);
-	cfg &= ~(HPET_CFG_ENABLE | HPET_CFG_LEGACY);
-	hpet_writel(cfg, HPET_CFG);
-	hpet_writel(0, HPET_COUNTER);
-	hpet_writel(0, HPET_COUNTER + 4);
-
-/*
- * Set up timer 0, as periodic with first interrupt to happen at hpet_tick,
- * and period also hpet_tick.
- */
-	if (hpet_use_timer) {
-		hpet_writel(HPET_TN_ENABLE | HPET_TN_PERIODIC | HPET_TN_SETVAL |
-		    HPET_TN_32BIT, HPET_T0_CFG);
-		hpet_writel(hpet_tick, HPET_T0_CMP); /* next interrupt */
-		hpet_writel(hpet_tick, HPET_T0_CMP); /* period */
-		cfg |= HPET_CFG_LEGACY;
-	}
-/*
- * Go!
- */
-
-	cfg |= HPET_CFG_ENABLE;
-	hpet_writel(cfg, HPET_CFG);
-
-	return 0;
-}
-
-static cycle_t read_hpet(void)
-{
-	return (cycle_t)hpet_readl(HPET_COUNTER);
-}
-
-static cycle_t __vsyscall_fn vread_hpet(void)
-{
-	return readl((void __iomem *)fix_to_virt(VSYSCALL_HPET) + 0xf0);
-}
-
-struct clocksource clocksource_hpet = {
-	.name		= "hpet",
-	.rating		= 250,
-	.read		= read_hpet,
-	.mask		= (cycle_t)HPET_MASK,
-	.mult		= 0, /* set below */
-	.shift		= HPET_SHIFT,
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-	.vread		= vread_hpet,
-};
-
-int __init hpet_arch_init(void)
-{
-	unsigned int id;
-	u64 tmp;
-
-	if (!hpet_address)
-		return -1;
-	set_fixmap_nocache(FIX_HPET_BASE, hpet_address);
-	__set_fixmap(VSYSCALL_HPET, hpet_address, PAGE_KERNEL_VSYSCALL_NOCACHE);
-
-/*
- * Read the period, compute tick and quotient.
- */
-
-	id = hpet_readl(HPET_ID);
-
-	if (!(id & HPET_ID_VENDOR) || !(id & HPET_ID_NUMBER))
-		return -1;
-
-	hpet_period = hpet_readl(HPET_PERIOD);
-	if (hpet_period < 100000 || hpet_period > 100000000)
-		return -1;
-
-	hpet_tick = (FSEC_PER_TICK + hpet_period / 2) / hpet_period;
-
-	hpet_use_timer = (id & HPET_ID_LEGSUP);
-
-	/*
-	 * hpet period is in femto seconds per cycle
-	 * so we need to convert this to ns/cyc units
-	 * aproximated by mult/2^shift
-	 *
-	 *  fsec/cyc * 1nsec/1000000fsec = nsec/cyc = mult/2^shift
-	 *  fsec/cyc * 1ns/1000000fsec * 2^shift = mult
-	 *  fsec/cyc * 2^shift * 1nsec/1000000fsec = mult
-	 *  (fsec/cyc << shift)/1000000 = mult
-	 *  (hpet_period << shift)/FSEC_PER_NSEC = mult
-	 */
-	tmp = (u64)hpet_period << HPET_SHIFT;
-	do_div(tmp, FSEC_PER_NSEC);
-	clocksource_hpet.mult = (u32)tmp;
-	clocksource_register(&clocksource_hpet);
-
-	return hpet_timer_stop_set_go(hpet_tick);
-}
-
-int hpet_reenable(void)
-{
-	return hpet_timer_stop_set_go(hpet_tick);
-}
-
-/*
- * calibrate_tsc() calibrates the processor TSC in a very simple way, comparing
- * it to the HPET timer of known frequency.
- */
-
-#define TICK_COUNT 100000000
-#define SMI_THRESHOLD 50000
-#define MAX_TRIES  5
-
-/*
- * Some platforms take periodic SMI interrupts with 5ms duration. Make sure none
- * occurs between the reads of the hpet & TSC.
- */
-static void __init read_hpet_tsc(int *hpet, int *tsc)
-{
-	int tsc1, tsc2, hpet1, i;
-
-	for (i = 0; i < MAX_TRIES; i++) {
-		tsc1 = get_cycles_sync();
-		hpet1 = hpet_readl(HPET_COUNTER);
-		tsc2 = get_cycles_sync();
-		if ((tsc2 - tsc1) < SMI_THRESHOLD)
-			break;
-	}
-	*hpet = hpet1;
-	*tsc = tsc2;
-}
-
-unsigned int __init hpet_calibrate_tsc(void)
-{
-	int tsc_start, hpet_start;
-	int tsc_now, hpet_now;
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	read_hpet_tsc(&hpet_start, &tsc_start);
-
-	do {
-		local_irq_disable();
-		read_hpet_tsc(&hpet_now, &tsc_now);
-		local_irq_restore(flags);
-	} while ((tsc_now - tsc_start) < TICK_COUNT &&
-		(hpet_now - hpet_start) < TICK_COUNT);
-
-	return (tsc_now - tsc_start) * 1000000000L
-		/ ((hpet_now - hpet_start) * hpet_period / 1000);
-}
-
-#ifdef CONFIG_HPET_EMULATE_RTC
-/* HPET in LegacyReplacement Mode eats up RTC interrupt line. When, HPET
- * is enabled, we support RTC interrupt functionality in software.
- * RTC has 3 kinds of interrupts:
- * 1) Update Interrupt - generate an interrupt, every sec, when RTC clock
- *    is updated
- * 2) Alarm Interrupt - generate an interrupt at a specific time of day
- * 3) Periodic Interrupt - generate periodic interrupt, with frequencies
- *    2Hz-8192Hz (2Hz-64Hz for non-root user) (all freqs in powers of 2)
- * (1) and (2) above are implemented using polling at a frequency of
- * 64 Hz. The exact frequency is a tradeoff between accuracy and interrupt
- * overhead. (DEFAULT_RTC_INT_FREQ)
- * For (3), we use interrupts at 64Hz or user specified periodic
- * frequency, whichever is higher.
- */
-#include <linux/rtc.h>
-
-#define DEFAULT_RTC_INT_FREQ 	64
-#define RTC_NUM_INTS 		1
-
-static unsigned long UIE_on;
-static unsigned long prev_update_sec;
-
-static unsigned long AIE_on;
-static struct rtc_time alarm_time;
-
-static unsigned long PIE_on;
-static unsigned long PIE_freq = DEFAULT_RTC_INT_FREQ;
-static unsigned long PIE_count;
-
-static unsigned long hpet_rtc_int_freq; /* RTC interrupt frequency */
-static unsigned int hpet_t1_cmp; /* cached comparator register */
-
-int is_hpet_enabled(void)
-{
-	return hpet_address != 0;
-}
-
-/*
- * Timer 1 for RTC, we do not use periodic interrupt feature,
- * even if HPET supports periodic interrupts on Timer 1.
- * The reason being, to set up a periodic interrupt in HPET, we need to
- * stop the main counter. And if we do that everytime someone diables/enables
- * RTC, we will have adverse effect on main kernel timer running on Timer 0.
- * So, for the time being, simulate the periodic interrupt in software.
- *
- * hpet_rtc_timer_init() is called for the first time and during subsequent
- * interuppts reinit happens through hpet_rtc_timer_reinit().
- */
-int hpet_rtc_timer_init(void)
-{
-	unsigned int cfg, cnt;
-	unsigned long flags;
-
-	if (!is_hpet_enabled())
-		return 0;
-	/*
-	 * Set the counter 1 and enable the interrupts.
-	 */
-	if (PIE_on && (PIE_freq > DEFAULT_RTC_INT_FREQ))
-		hpet_rtc_int_freq = PIE_freq;
-	else
-		hpet_rtc_int_freq = DEFAULT_RTC_INT_FREQ;
-
-	local_irq_save(flags);
-
-	cnt = hpet_readl(HPET_COUNTER);
-	cnt += ((hpet_tick*HZ)/hpet_rtc_int_freq);
-	hpet_writel(cnt, HPET_T1_CMP);
-	hpet_t1_cmp = cnt;
-
-	cfg = hpet_readl(HPET_T1_CFG);
-	cfg &= ~HPET_TN_PERIODIC;
-	cfg |= HPET_TN_ENABLE | HPET_TN_32BIT;
-	hpet_writel(cfg, HPET_T1_CFG);
-
-	local_irq_restore(flags);
-
-	return 1;
-}
-
-static void hpet_rtc_timer_reinit(void)
-{
-	unsigned int cfg, cnt, ticks_per_int, lost_ints;
-
-	if (unlikely(!(PIE_on | AIE_on | UIE_on))) {
-		cfg = hpet_readl(HPET_T1_CFG);
-		cfg &= ~HPET_TN_ENABLE;
-		hpet_writel(cfg, HPET_T1_CFG);
-		return;
-	}
-
-	if (PIE_on && (PIE_freq > DEFAULT_RTC_INT_FREQ))
-		hpet_rtc_int_freq = PIE_freq;
-	else
-		hpet_rtc_int_freq = DEFAULT_RTC_INT_FREQ;
-
-	/* It is more accurate to use the comparator value than current count.*/
-	ticks_per_int = hpet_tick * HZ / hpet_rtc_int_freq;
-	hpet_t1_cmp += ticks_per_int;
-	hpet_writel(hpet_t1_cmp, HPET_T1_CMP);
-
-	/*
-	 * If the interrupt handler was delayed too long, the write above tries
-	 * to schedule the next interrupt in the past and the hardware would
-	 * not interrupt until the counter had wrapped around.
-	 * So we have to check that the comparator wasn't set to a past time.
-	 */
-	cnt = hpet_readl(HPET_COUNTER);
-	if (unlikely((int)(cnt - hpet_t1_cmp) > 0)) {
-		lost_ints = (cnt - hpet_t1_cmp) / ticks_per_int + 1;
-		/* Make sure that, even with the time needed to execute
-		 * this code, the next scheduled interrupt has been moved
-		 * back to the future: */
-		lost_ints++;
-
-		hpet_t1_cmp += lost_ints * ticks_per_int;
-		hpet_writel(hpet_t1_cmp, HPET_T1_CMP);
-
-		if (PIE_on)
-			PIE_count += lost_ints;
-
-		if (printk_ratelimit())
-			printk(KERN_WARNING "rtc: lost some interrupts at %ldHz.\n",
-			       hpet_rtc_int_freq);
-	}
-}
-
-/*
- * The functions below are called from rtc driver.
- * Return 0 if HPET is not being used.
- * Otherwise do the necessary changes and return 1.
- */
-int hpet_mask_rtc_irq_bit(unsigned long bit_mask)
-{
-	if (!is_hpet_enabled())
-		return 0;
-
-	if (bit_mask & RTC_UIE)
-		UIE_on = 0;
-	if (bit_mask & RTC_PIE)
-		PIE_on = 0;
-	if (bit_mask & RTC_AIE)
-		AIE_on = 0;
-
-	return 1;
-}
-
-int hpet_set_rtc_irq_bit(unsigned long bit_mask)
-{
-	int timer_init_reqd = 0;
-
-	if (!is_hpet_enabled())
-		return 0;
-
-	if (!(PIE_on | AIE_on | UIE_on))
-		timer_init_reqd = 1;
-
-	if (bit_mask & RTC_UIE) {
-		UIE_on = 1;
-	}
-	if (bit_mask & RTC_PIE) {
-		PIE_on = 1;
-		PIE_count = 0;
-	}
-	if (bit_mask & RTC_AIE) {
-		AIE_on = 1;
-	}
-
-	if (timer_init_reqd)
-		hpet_rtc_timer_init();
-
-	return 1;
-}
-
-int hpet_set_alarm_time(unsigned char hrs, unsigned char min, unsigned char sec)
-{
-	if (!is_hpet_enabled())
-		return 0;
-
-	alarm_time.tm_hour = hrs;
-	alarm_time.tm_min = min;
-	alarm_time.tm_sec = sec;
-
-	return 1;
-}
-
-int hpet_set_periodic_freq(unsigned long freq)
-{
-	if (!is_hpet_enabled())
-		return 0;
-
-	PIE_freq = freq;
-	PIE_count = 0;
-
-	return 1;
-}
-
-int hpet_rtc_dropped_irq(void)
-{
-	if (!is_hpet_enabled())
-		return 0;
-
-	return 1;
-}
-
-irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id)
-{
-	struct rtc_time curr_time;
-	unsigned long rtc_int_flag = 0;
-	int call_rtc_interrupt = 0;
-
-	hpet_rtc_timer_reinit();
-
-	if (UIE_on | AIE_on) {
-		rtc_get_rtc_time(&curr_time);
-	}
-	if (UIE_on) {
-		if (curr_time.tm_sec != prev_update_sec) {
-			/* Set update int info, call real rtc int routine */
-			call_rtc_interrupt = 1;
-			rtc_int_flag = RTC_UF;
-			prev_update_sec = curr_time.tm_sec;
-		}
-	}
-	if (PIE_on) {
-		PIE_count++;
-		if (PIE_count >= hpet_rtc_int_freq/PIE_freq) {
-			/* Set periodic int info, call real rtc int routine */
-			call_rtc_interrupt = 1;
-			rtc_int_flag |= RTC_PF;
-			PIE_count = 0;
-		}
-	}
-	if (AIE_on) {
-		if ((curr_time.tm_sec == alarm_time.tm_sec) &&
-		    (curr_time.tm_min == alarm_time.tm_min) &&
-		    (curr_time.tm_hour == alarm_time.tm_hour)) {
-			/* Set alarm int info, call real rtc int routine */
-			call_rtc_interrupt = 1;
-			rtc_int_flag |= RTC_AF;
-		}
-	}
-	if (call_rtc_interrupt) {
-		rtc_int_flag |= (RTC_IRQF | (RTC_NUM_INTS << 8));
-		rtc_interrupt(rtc_int_flag, dev_id);
-	}
-	return IRQ_HANDLED;
-}
-#endif
-
-static int __init nohpet_setup(char *s)
-{
-	nohpet = 1;
-	return 1;
-}
-
-__setup("nohpet", nohpet_setup);
diff --git a/arch/x86_64/kernel/i387_64.c b/arch/x86_64/kernel/i387_64.c
deleted file mode 100644
index 1d58c13..0000000
--- a/arch/x86_64/kernel/i387_64.c
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- *  linux/arch/x86_64/kernel/i387.c
- *
- *  Copyright (C) 1994 Linus Torvalds
- *  Copyright (C) 2002 Andi Kleen, SuSE Labs
- *
- *  Pentium III FXSR, SSE support
- *  General FPU state handling cleanups
- *	Gareth Hughes <gareth@valinux.com>, May 2000
- * 
- *  x86-64 rework 2002 Andi Kleen. 
- *  Does direct fxsave in and out of user space now for signal handlers.
- *  All the FSAVE<->FXSAVE conversion code has been moved to the 32bit emulation,
- *  the 64bit user space sees a FXSAVE frame directly. 
- */
-
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <asm/processor.h>
-#include <asm/i387.h>
-#include <asm/sigcontext.h>
-#include <asm/user.h>
-#include <asm/ptrace.h>
-#include <asm/uaccess.h>
-
-unsigned int mxcsr_feature_mask __read_mostly = 0xffffffff;
-
-void mxcsr_feature_mask_init(void)
-{
-	unsigned int mask;
-	clts();
-	memset(&current->thread.i387.fxsave, 0, sizeof(struct i387_fxsave_struct));
-	asm volatile("fxsave %0" : : "m" (current->thread.i387.fxsave));
-	mask = current->thread.i387.fxsave.mxcsr_mask;
-	if (mask == 0) mask = 0x0000ffbf;
-	mxcsr_feature_mask &= mask;
-	stts();
-}
-
-/*
- * Called at bootup to set up the initial FPU state that is later cloned
- * into all processes.
- */
-void __cpuinit fpu_init(void)
-{
-	unsigned long oldcr0 = read_cr0();
-	extern void __bad_fxsave_alignment(void);
-		
-	if (offsetof(struct task_struct, thread.i387.fxsave) & 15)
-		__bad_fxsave_alignment();
-	set_in_cr4(X86_CR4_OSFXSR);
-	set_in_cr4(X86_CR4_OSXMMEXCPT);
-
-	write_cr0(oldcr0 & ~((1UL<<3)|(1UL<<2))); /* clear TS and EM */
-
-	mxcsr_feature_mask_init();
-	/* clean state in init */
-	current_thread_info()->status = 0;
-	clear_used_math();
-}
-
-void init_fpu(struct task_struct *child)
-{
-	if (tsk_used_math(child)) {
-		if (child == current)
-			unlazy_fpu(child);
-		return;
-	}	
-	memset(&child->thread.i387.fxsave, 0, sizeof(struct i387_fxsave_struct));
-	child->thread.i387.fxsave.cwd = 0x37f;
-	child->thread.i387.fxsave.mxcsr = 0x1f80;
-	/* only the device not available exception or ptrace can call init_fpu */
-	set_stopped_child_used_math(child);
-}
-
-/*
- * Signal frame handlers.
- */
-
-int save_i387(struct _fpstate __user *buf)
-{
-	struct task_struct *tsk = current;
-	int err = 0;
-
-	BUILD_BUG_ON(sizeof(struct user_i387_struct) !=
-			sizeof(tsk->thread.i387.fxsave));
-
-	if ((unsigned long)buf % 16) 
-		printk("save_i387: bad fpstate %p\n",buf); 
-
-	if (!used_math())
-		return 0;
-	clear_used_math(); /* trigger finit */
-	if (task_thread_info(tsk)->status & TS_USEDFPU) {
-		err = save_i387_checking((struct i387_fxsave_struct __user *)buf);
-		if (err) return err;
-		stts();
-		} else {
-		if (__copy_to_user(buf, &tsk->thread.i387.fxsave, 
-				   sizeof(struct i387_fxsave_struct)))
-			return -1;
-	} 
-		return 1;
-}
-
-/*
- * ptrace request handlers.
- */
-
-int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *tsk)
-{
-	init_fpu(tsk);
-	return __copy_to_user(buf, &tsk->thread.i387.fxsave,
-			       sizeof(struct user_i387_struct)) ? -EFAULT : 0;
-}
-
-int set_fpregs(struct task_struct *tsk, struct user_i387_struct __user *buf)
-{
-	if (__copy_from_user(&tsk->thread.i387.fxsave, buf, 
-			     sizeof(struct user_i387_struct)))
-		return -EFAULT;
-		return 0;
-}
-
-/*
- * FPU state for core dumps.
- */
-
-int dump_fpu( struct pt_regs *regs, struct user_i387_struct *fpu )
-{
-	struct task_struct *tsk = current;
-
-	if (!used_math())
-		return 0;
-
-	unlazy_fpu(tsk);
-	memcpy(fpu, &tsk->thread.i387.fxsave, sizeof(struct user_i387_struct)); 
-	return 1; 
-}
-
-int dump_task_fpu(struct task_struct *tsk, struct user_i387_struct *fpu)
-{
-	int fpvalid = !!tsk_used_math(tsk);
-
-	if (fpvalid) {
-		if (tsk == current)
-			unlazy_fpu(tsk);
-		memcpy(fpu, &tsk->thread.i387.fxsave, sizeof(struct user_i387_struct)); 	
-}
-	return fpvalid;
-}
diff --git a/arch/x86_64/kernel/i8259_64.c b/arch/x86_64/kernel/i8259_64.c
deleted file mode 100644
index 948cae6..0000000
--- a/arch/x86_64/kernel/i8259_64.c
+++ /dev/null
@@ -1,544 +0,0 @@
-#include <linux/linkage.h>
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/timex.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/sysdev.h>
-#include <linux/bitops.h>
-
-#include <asm/acpi.h>
-#include <asm/atomic.h>
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/hw_irq.h>
-#include <asm/pgtable.h>
-#include <asm/delay.h>
-#include <asm/desc.h>
-#include <asm/apic.h>
-
-/*
- * Common place to define all x86 IRQ vectors
- *
- * This builds up the IRQ handler stubs using some ugly macros in irq.h
- *
- * These macros create the low-level assembly IRQ routines that save
- * register context and call do_IRQ(). do_IRQ() then does all the
- * operations that are needed to keep the AT (or SMP IOAPIC)
- * interrupt-controller happy.
- */
-
-#define BI(x,y) \
-	BUILD_IRQ(x##y)
-
-#define BUILD_16_IRQS(x) \
-	BI(x,0) BI(x,1) BI(x,2) BI(x,3) \
-	BI(x,4) BI(x,5) BI(x,6) BI(x,7) \
-	BI(x,8) BI(x,9) BI(x,a) BI(x,b) \
-	BI(x,c) BI(x,d) BI(x,e) BI(x,f)
-
-/*
- * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts:
- * (these are usually mapped to vectors 0x30-0x3f)
- */
-
-/*
- * The IO-APIC gives us many more interrupt sources. Most of these 
- * are unused but an SMP system is supposed to have enough memory ...
- * sometimes (mostly wrt. hw bugs) we get corrupted vectors all
- * across the spectrum, so we really want to be prepared to get all
- * of these. Plus, more powerful systems might have more than 64
- * IO-APIC registers.
- *
- * (these are usually mapped into the 0x30-0xff vector range)
- */
-				      BUILD_16_IRQS(0x2) BUILD_16_IRQS(0x3)
-BUILD_16_IRQS(0x4) BUILD_16_IRQS(0x5) BUILD_16_IRQS(0x6) BUILD_16_IRQS(0x7)
-BUILD_16_IRQS(0x8) BUILD_16_IRQS(0x9) BUILD_16_IRQS(0xa) BUILD_16_IRQS(0xb)
-BUILD_16_IRQS(0xc) BUILD_16_IRQS(0xd) BUILD_16_IRQS(0xe) BUILD_16_IRQS(0xf)
-
-#undef BUILD_16_IRQS
-#undef BI
-
-
-#define IRQ(x,y) \
-	IRQ##x##y##_interrupt
-
-#define IRQLIST_16(x) \
-	IRQ(x,0), IRQ(x,1), IRQ(x,2), IRQ(x,3), \
-	IRQ(x,4), IRQ(x,5), IRQ(x,6), IRQ(x,7), \
-	IRQ(x,8), IRQ(x,9), IRQ(x,a), IRQ(x,b), \
-	IRQ(x,c), IRQ(x,d), IRQ(x,e), IRQ(x,f)
-
-/* for the irq vectors */
-static void (*interrupt[NR_VECTORS - FIRST_EXTERNAL_VECTOR])(void) = {
-					  IRQLIST_16(0x2), IRQLIST_16(0x3),
-	IRQLIST_16(0x4), IRQLIST_16(0x5), IRQLIST_16(0x6), IRQLIST_16(0x7),
-	IRQLIST_16(0x8), IRQLIST_16(0x9), IRQLIST_16(0xa), IRQLIST_16(0xb),
-	IRQLIST_16(0xc), IRQLIST_16(0xd), IRQLIST_16(0xe), IRQLIST_16(0xf)
-};
-
-#undef IRQ
-#undef IRQLIST_16
-
-/*
- * This is the 'legacy' 8259A Programmable Interrupt Controller,
- * present in the majority of PC/AT boxes.
- * plus some generic x86 specific things if generic specifics makes
- * any sense at all.
- * this file should become arch/i386/kernel/irq.c when the old irq.c
- * moves to arch independent land
- */
-
-static int i8259A_auto_eoi;
-DEFINE_SPINLOCK(i8259A_lock);
-static void mask_and_ack_8259A(unsigned int);
-
-static struct irq_chip i8259A_chip = {
-	.name		= "XT-PIC",
-	.mask		= disable_8259A_irq,
-	.disable	= disable_8259A_irq,
-	.unmask		= enable_8259A_irq,
-	.mask_ack	= mask_and_ack_8259A,
-};
-
-/*
- * 8259A PIC functions to handle ISA devices:
- */
-
-/*
- * This contains the irq mask for both 8259A irq controllers,
- */
-static unsigned int cached_irq_mask = 0xffff;
-
-#define __byte(x,y) 	(((unsigned char *)&(y))[x])
-#define cached_21	(__byte(0,cached_irq_mask))
-#define cached_A1	(__byte(1,cached_irq_mask))
-
-/*
- * Not all IRQs can be routed through the IO-APIC, eg. on certain (older)
- * boards the timer interrupt is not really connected to any IO-APIC pin,
- * it's fed to the master 8259A's IR0 line only.
- *
- * Any '1' bit in this mask means the IRQ is routed through the IO-APIC.
- * this 'mixed mode' IRQ handling costs nothing because it's only used
- * at IRQ setup time.
- */
-unsigned long io_apic_irqs;
-
-void disable_8259A_irq(unsigned int irq)
-{
-	unsigned int mask = 1 << irq;
-	unsigned long flags;
-
-	spin_lock_irqsave(&i8259A_lock, flags);
-	cached_irq_mask |= mask;
-	if (irq & 8)
-		outb(cached_A1,0xA1);
-	else
-		outb(cached_21,0x21);
-	spin_unlock_irqrestore(&i8259A_lock, flags);
-}
-
-void enable_8259A_irq(unsigned int irq)
-{
-	unsigned int mask = ~(1 << irq);
-	unsigned long flags;
-
-	spin_lock_irqsave(&i8259A_lock, flags);
-	cached_irq_mask &= mask;
-	if (irq & 8)
-		outb(cached_A1,0xA1);
-	else
-		outb(cached_21,0x21);
-	spin_unlock_irqrestore(&i8259A_lock, flags);
-}
-
-int i8259A_irq_pending(unsigned int irq)
-{
-	unsigned int mask = 1<<irq;
-	unsigned long flags;
-	int ret;
-
-	spin_lock_irqsave(&i8259A_lock, flags);
-	if (irq < 8)
-		ret = inb(0x20) & mask;
-	else
-		ret = inb(0xA0) & (mask >> 8);
-	spin_unlock_irqrestore(&i8259A_lock, flags);
-
-	return ret;
-}
-
-void make_8259A_irq(unsigned int irq)
-{
-	disable_irq_nosync(irq);
-	io_apic_irqs &= ~(1<<irq);
-	set_irq_chip_and_handler_name(irq, &i8259A_chip, handle_level_irq,
-				      "XT");
-	enable_irq(irq);
-}
-
-/*
- * This function assumes to be called rarely. Switching between
- * 8259A registers is slow.
- * This has to be protected by the irq controller spinlock
- * before being called.
- */
-static inline int i8259A_irq_real(unsigned int irq)
-{
-	int value;
-	int irqmask = 1<<irq;
-
-	if (irq < 8) {
-		outb(0x0B,0x20);		/* ISR register */
-		value = inb(0x20) & irqmask;
-		outb(0x0A,0x20);		/* back to the IRR register */
-		return value;
-	}
-	outb(0x0B,0xA0);		/* ISR register */
-	value = inb(0xA0) & (irqmask >> 8);
-	outb(0x0A,0xA0);		/* back to the IRR register */
-	return value;
-}
-
-/*
- * Careful! The 8259A is a fragile beast, it pretty
- * much _has_ to be done exactly like this (mask it
- * first, _then_ send the EOI, and the order of EOI
- * to the two 8259s is important!
- */
-static void mask_and_ack_8259A(unsigned int irq)
-{
-	unsigned int irqmask = 1 << irq;
-	unsigned long flags;
-
-	spin_lock_irqsave(&i8259A_lock, flags);
-	/*
-	 * Lightweight spurious IRQ detection. We do not want
-	 * to overdo spurious IRQ handling - it's usually a sign
-	 * of hardware problems, so we only do the checks we can
-	 * do without slowing down good hardware unnecessarily.
-	 *
-	 * Note that IRQ7 and IRQ15 (the two spurious IRQs
-	 * usually resulting from the 8259A-1|2 PICs) occur
-	 * even if the IRQ is masked in the 8259A. Thus we
-	 * can check spurious 8259A IRQs without doing the
-	 * quite slow i8259A_irq_real() call for every IRQ.
-	 * This does not cover 100% of spurious interrupts,
-	 * but should be enough to warn the user that there
-	 * is something bad going on ...
-	 */
-	if (cached_irq_mask & irqmask)
-		goto spurious_8259A_irq;
-	cached_irq_mask |= irqmask;
-
-handle_real_irq:
-	if (irq & 8) {
-		inb(0xA1);		/* DUMMY - (do we need this?) */
-		outb(cached_A1,0xA1);
-		outb(0x60+(irq&7),0xA0);/* 'Specific EOI' to slave */
-		outb(0x62,0x20);	/* 'Specific EOI' to master-IRQ2 */
-	} else {
-		inb(0x21);		/* DUMMY - (do we need this?) */
-		outb(cached_21,0x21);
-		outb(0x60+irq,0x20);	/* 'Specific EOI' to master */
-	}
-	spin_unlock_irqrestore(&i8259A_lock, flags);
-	return;
-
-spurious_8259A_irq:
-	/*
-	 * this is the slow path - should happen rarely.
-	 */
-	if (i8259A_irq_real(irq))
-		/*
-		 * oops, the IRQ _is_ in service according to the
-		 * 8259A - not spurious, go handle it.
-		 */
-		goto handle_real_irq;
-
-	{
-		static int spurious_irq_mask;
-		/*
-		 * At this point we can be sure the IRQ is spurious,
-		 * lets ACK and report it. [once per IRQ]
-		 */
-		if (!(spurious_irq_mask & irqmask)) {
-			printk(KERN_DEBUG "spurious 8259A interrupt: IRQ%d.\n", irq);
-			spurious_irq_mask |= irqmask;
-		}
-		atomic_inc(&irq_err_count);
-		/*
-		 * Theoretically we do not have to handle this IRQ,
-		 * but in Linux this does not cause problems and is
-		 * simpler for us.
-		 */
-		goto handle_real_irq;
-	}
-}
-
-void init_8259A(int auto_eoi)
-{
-	unsigned long flags;
-
-	i8259A_auto_eoi = auto_eoi;
-
-	spin_lock_irqsave(&i8259A_lock, flags);
-
-	outb(0xff, 0x21);	/* mask all of 8259A-1 */
-	outb(0xff, 0xA1);	/* mask all of 8259A-2 */
-
-	/*
-	 * outb_p - this has to work on a wide range of PC hardware.
-	 */
-	outb_p(0x11, 0x20);	/* ICW1: select 8259A-1 init */
-	outb_p(IRQ0_VECTOR, 0x21);	/* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 */
-	outb_p(0x04, 0x21);	/* 8259A-1 (the master) has a slave on IR2 */
-	if (auto_eoi)
-		outb_p(0x03, 0x21);	/* master does Auto EOI */
-	else
-		outb_p(0x01, 0x21);	/* master expects normal EOI */
-
-	outb_p(0x11, 0xA0);	/* ICW1: select 8259A-2 init */
-	outb_p(IRQ8_VECTOR, 0xA1);	/* ICW2: 8259A-2 IR0-7 mapped to 0x38-0x3f */
-	outb_p(0x02, 0xA1);	/* 8259A-2 is a slave on master's IR2 */
-	outb_p(0x01, 0xA1);	/* (slave's support for AEOI in flat mode
-				    is to be investigated) */
-
-	if (auto_eoi)
-		/*
-		 * in AEOI mode we just have to mask the interrupt
-		 * when acking.
-		 */
-		i8259A_chip.mask_ack = disable_8259A_irq;
-	else
-		i8259A_chip.mask_ack = mask_and_ack_8259A;
-
-	udelay(100);		/* wait for 8259A to initialize */
-
-	outb(cached_21, 0x21);	/* restore master IRQ mask */
-	outb(cached_A1, 0xA1);	/* restore slave IRQ mask */
-
-	spin_unlock_irqrestore(&i8259A_lock, flags);
-}
-
-static char irq_trigger[2];
-/**
- * ELCR registers (0x4d0, 0x4d1) control edge/level of IRQ
- */
-static void restore_ELCR(char *trigger)
-{
-	outb(trigger[0], 0x4d0);
-	outb(trigger[1], 0x4d1);
-}
-
-static void save_ELCR(char *trigger)
-{
-	/* IRQ 0,1,2,8,13 are marked as reserved */
-	trigger[0] = inb(0x4d0) & 0xF8;
-	trigger[1] = inb(0x4d1) & 0xDE;
-}
-
-static int i8259A_resume(struct sys_device *dev)
-{
-	init_8259A(i8259A_auto_eoi);
-	restore_ELCR(irq_trigger);
-	return 0;
-}
-
-static int i8259A_suspend(struct sys_device *dev, pm_message_t state)
-{
-	save_ELCR(irq_trigger);
-	return 0;
-}
-
-static int i8259A_shutdown(struct sys_device *dev)
-{
-	/* Put the i8259A into a quiescent state that
-	 * the kernel initialization code can get it
-	 * out of.
-	 */
-	outb(0xff, 0x21);	/* mask all of 8259A-1 */
-	outb(0xff, 0xA1);	/* mask all of 8259A-1 */
-	return 0;
-}
-
-static struct sysdev_class i8259_sysdev_class = {
-	set_kset_name("i8259"),
-	.suspend = i8259A_suspend,
-	.resume = i8259A_resume,
-	.shutdown = i8259A_shutdown,
-};
-
-static struct sys_device device_i8259A = {
-	.id	= 0,
-	.cls	= &i8259_sysdev_class,
-};
-
-static int __init i8259A_init_sysfs(void)
-{
-	int error = sysdev_class_register(&i8259_sysdev_class);
-	if (!error)
-		error = sysdev_register(&device_i8259A);
-	return error;
-}
-
-device_initcall(i8259A_init_sysfs);
-
-/*
- * IRQ2 is cascade interrupt to second interrupt controller
- */
-
-static struct irqaction irq2 = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL};
-DEFINE_PER_CPU(vector_irq_t, vector_irq) = {
-	[0 ... IRQ0_VECTOR - 1] = -1,
-	[IRQ0_VECTOR] = 0,
-	[IRQ1_VECTOR] = 1,
-	[IRQ2_VECTOR] = 2,
-	[IRQ3_VECTOR] = 3,
-	[IRQ4_VECTOR] = 4,
-	[IRQ5_VECTOR] = 5,
-	[IRQ6_VECTOR] = 6,
-	[IRQ7_VECTOR] = 7,
-	[IRQ8_VECTOR] = 8,
-	[IRQ9_VECTOR] = 9,
-	[IRQ10_VECTOR] = 10,
-	[IRQ11_VECTOR] = 11,
-	[IRQ12_VECTOR] = 12,
-	[IRQ13_VECTOR] = 13,
-	[IRQ14_VECTOR] = 14,
-	[IRQ15_VECTOR] = 15,
-	[IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1
-};
-
-void __init init_ISA_irqs (void)
-{
-	int i;
-
-	init_bsp_APIC();
-	init_8259A(0);
-
-	for (i = 0; i < NR_IRQS; i++) {
-		irq_desc[i].status = IRQ_DISABLED;
-		irq_desc[i].action = NULL;
-		irq_desc[i].depth = 1;
-
-		if (i < 16) {
-			/*
-			 * 16 old-style INTA-cycle interrupts:
-			 */
-			set_irq_chip_and_handler_name(i, &i8259A_chip,
-						      handle_level_irq, "XT");
-		} else {
-			/*
-			 * 'high' PCI IRQs filled in on demand
-			 */
-			irq_desc[i].chip = &no_irq_chip;
-		}
-	}
-}
-
-static void setup_timer_hardware(void)
-{
-	outb_p(0x34,0x43);		/* binary, mode 2, LSB/MSB, ch 0 */
-	udelay(10);
-	outb_p(LATCH & 0xff , 0x40);	/* LSB */
-	udelay(10);
-	outb(LATCH >> 8 , 0x40);	/* MSB */
-}
-
-static int timer_resume(struct sys_device *dev)
-{
-	setup_timer_hardware();
-	return 0;
-}
-
-void i8254_timer_resume(void)
-{
-	setup_timer_hardware();
-}
-
-static struct sysdev_class timer_sysclass = {
-	set_kset_name("timer_pit"),
-	.resume		= timer_resume,
-};
-
-static struct sys_device device_timer = {
-	.id		= 0,
-	.cls		= &timer_sysclass,
-};
-
-static int __init init_timer_sysfs(void)
-{
-	int error = sysdev_class_register(&timer_sysclass);
-	if (!error)
-		error = sysdev_register(&device_timer);
-	return error;
-}
-
-device_initcall(init_timer_sysfs);
-
-void __init init_IRQ(void)
-{
-	int i;
-
-	init_ISA_irqs();
-	/*
-	 * Cover the whole vector space, no vector can escape
-	 * us. (some of these will be overridden and become
-	 * 'special' SMP interrupts)
-	 */
-	for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) {
-		int vector = FIRST_EXTERNAL_VECTOR + i;
-		if (vector != IA32_SYSCALL_VECTOR)
-			set_intr_gate(vector, interrupt[i]);
-	}
-
-#ifdef CONFIG_SMP
-	/*
-	 * The reschedule interrupt is a CPU-to-CPU reschedule-helper
-	 * IPI, driven by wakeup.
-	 */
-	set_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt);
-
-	/* IPIs for invalidation */
-	set_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0);
-	set_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1);
-	set_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2);
-	set_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3);
-	set_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4);
-	set_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5);
-	set_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6);
-	set_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7);
-
-	/* IPI for generic function call */
-	set_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
-
-	/* Low priority IPI to cleanup after moving an irq */
-	set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt);
-#endif
-	set_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
-	set_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt);
-
-	/* self generated IPI for local APIC timer */
-	set_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
-
-	/* IPI vectors for APIC spurious and error interrupts */
-	set_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
-	set_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
-
-	/*
-	 * Set the clock to HZ Hz, we already have a valid
-	 * vector now:
-	 */
-	setup_timer_hardware();
-
-	if (!acpi_ioapic)
-		setup_irq(2, &irq2);
-}
diff --git a/arch/x86_64/kernel/init_task_64.c b/arch/x86_64/kernel/init_task_64.c
deleted file mode 100644
index 4ff33d4..0000000
--- a/arch/x86_64/kernel/init_task_64.c
+++ /dev/null
@@ -1,54 +0,0 @@
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/init_task.h>
-#include <linux/fs.h>
-#include <linux/mqueue.h>
-
-#include <asm/uaccess.h>
-#include <asm/pgtable.h>
-#include <asm/desc.h>
-
-static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
-static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
-static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-struct mm_struct init_mm = INIT_MM(init_mm);
-
-EXPORT_SYMBOL(init_mm);
-
-/*
- * Initial task structure.
- *
- * We need to make sure that this is 8192-byte aligned due to the
- * way process stacks are handled. This is done by having a special
- * "init_task" linker map entry..
- */
-union thread_union init_thread_union 
-	__attribute__((__section__(".data.init_task"))) =
-		{ INIT_THREAD_INFO(init_task) };
-
-/*
- * Initial task structure.
- *
- * All other task structs will be allocated on slabs in fork.c
- */
-struct task_struct init_task = INIT_TASK(init_task);
-
-EXPORT_SYMBOL(init_task);
-/*
- * per-CPU TSS segments. Threads are completely 'soft' on Linux,
- * no more per-task TSS's. The TSS size is kept cacheline-aligned
- * so they are allowed to end up in the .data.cacheline_aligned
- * section. Since TSS's are completely CPU-local, we want them
- * on exact cacheline boundaries, to eliminate cacheline ping-pong.
- */ 
-DEFINE_PER_CPU_SHARED_ALIGNED(struct tss_struct, init_tss) = INIT_TSS;
-
-/* Copies of the original ist values from the tss are only accessed during
- * debugging, no special alignment required.
- */
-DEFINE_PER_CPU(struct orig_ist, orig_ist);
-
-#define ALIGN_TO_4K __attribute__((section(".data.init_task")))
diff --git a/arch/x86_64/kernel/io_apic_64.c b/arch/x86_64/kernel/io_apic_64.c
deleted file mode 100644
index 966fa10..0000000
--- a/arch/x86_64/kernel/io_apic_64.c
+++ /dev/null
@@ -1,2202 +0,0 @@
-/*
- *	Intel IO-APIC support for multi-Pentium hosts.
- *
- *	Copyright (C) 1997, 1998, 1999, 2000 Ingo Molnar, Hajnalka Szabo
- *
- *	Many thanks to Stig Venaas for trying out countless experimental
- *	patches and reporting/debugging problems patiently!
- *
- *	(c) 1999, Multiple IO-APIC support, developed by
- *	Ken-ichi Yaku <yaku@css1.kbnes.nec.co.jp> and
- *      Hidemi Kishimoto <kisimoto@css1.kbnes.nec.co.jp>,
- *	further tested and cleaned up by Zach Brown <zab@redhat.com>
- *	and Ingo Molnar <mingo@redhat.com>
- *
- *	Fixes
- *	Maciej W. Rozycki	:	Bits for genuine 82489DX APICs;
- *					thanks to Eric Gilmore
- *					and Rolf G. Tews
- *					for testing these extensively
- *	Paul Diefenbaugh	:	Added full ACPI support
- */
-
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/mc146818rtc.h>
-#include <linux/acpi.h>
-#include <linux/sysdev.h>
-#include <linux/msi.h>
-#include <linux/htirq.h>
-#ifdef CONFIG_ACPI
-#include <acpi/acpi_bus.h>
-#endif
-
-#include <asm/idle.h>
-#include <asm/io.h>
-#include <asm/smp.h>
-#include <asm/desc.h>
-#include <asm/proto.h>
-#include <asm/mach_apic.h>
-#include <asm/acpi.h>
-#include <asm/dma.h>
-#include <asm/nmi.h>
-#include <asm/msidef.h>
-#include <asm/hypertransport.h>
-
-struct irq_cfg {
-	cpumask_t domain;
-	cpumask_t old_domain;
-	unsigned move_cleanup_count;
-	u8 vector;
-	u8 move_in_progress : 1;
-};
-
-/* irq_cfg is indexed by the sum of all RTEs in all I/O APICs. */
-struct irq_cfg irq_cfg[NR_IRQS] __read_mostly = {
-	[0]  = { .domain = CPU_MASK_ALL, .vector = IRQ0_VECTOR,  },
-	[1]  = { .domain = CPU_MASK_ALL, .vector = IRQ1_VECTOR,  },
-	[2]  = { .domain = CPU_MASK_ALL, .vector = IRQ2_VECTOR,  },
-	[3]  = { .domain = CPU_MASK_ALL, .vector = IRQ3_VECTOR,  },
-	[4]  = { .domain = CPU_MASK_ALL, .vector = IRQ4_VECTOR,  },
-	[5]  = { .domain = CPU_MASK_ALL, .vector = IRQ5_VECTOR,  },
-	[6]  = { .domain = CPU_MASK_ALL, .vector = IRQ6_VECTOR,  },
-	[7]  = { .domain = CPU_MASK_ALL, .vector = IRQ7_VECTOR,  },
-	[8]  = { .domain = CPU_MASK_ALL, .vector = IRQ8_VECTOR,  },
-	[9]  = { .domain = CPU_MASK_ALL, .vector = IRQ9_VECTOR,  },
-	[10] = { .domain = CPU_MASK_ALL, .vector = IRQ10_VECTOR, },
-	[11] = { .domain = CPU_MASK_ALL, .vector = IRQ11_VECTOR, },
-	[12] = { .domain = CPU_MASK_ALL, .vector = IRQ12_VECTOR, },
-	[13] = { .domain = CPU_MASK_ALL, .vector = IRQ13_VECTOR, },
-	[14] = { .domain = CPU_MASK_ALL, .vector = IRQ14_VECTOR, },
-	[15] = { .domain = CPU_MASK_ALL, .vector = IRQ15_VECTOR, },
-};
-
-static int assign_irq_vector(int irq, cpumask_t mask);
-
-#define __apicdebuginit  __init
-
-int sis_apic_bug; /* not actually supported, dummy for compile */
-
-static int no_timer_check;
-
-static int disable_timer_pin_1 __initdata;
-
-int timer_over_8254 __initdata = 1;
-
-/* Where if anywhere is the i8259 connect in external int mode */
-static struct { int pin, apic; } ioapic_i8259 = { -1, -1 };
-
-static DEFINE_SPINLOCK(ioapic_lock);
-DEFINE_SPINLOCK(vector_lock);
-
-/*
- * # of IRQ routing registers
- */
-int nr_ioapic_registers[MAX_IO_APICS];
-
-/*
- * Rough estimation of how many shared IRQs there are, can
- * be changed anytime.
- */
-#define MAX_PLUS_SHARED_IRQS NR_IRQS
-#define PIN_MAP_SIZE (MAX_PLUS_SHARED_IRQS + NR_IRQS)
-
-/*
- * This is performance-critical, we want to do it O(1)
- *
- * the indexing order of this array favors 1:1 mappings
- * between pins and IRQs.
- */
-
-static struct irq_pin_list {
-	short apic, pin, next;
-} irq_2_pin[PIN_MAP_SIZE];
-
-struct io_apic {
-	unsigned int index;
-	unsigned int unused[3];
-	unsigned int data;
-};
-
-static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx)
-{
-	return (void __iomem *) __fix_to_virt(FIX_IO_APIC_BASE_0 + idx)
-		+ (mp_ioapics[idx].mpc_apicaddr & ~PAGE_MASK);
-}
-
-static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg)
-{
-	struct io_apic __iomem *io_apic = io_apic_base(apic);
-	writel(reg, &io_apic->index);
-	return readl(&io_apic->data);
-}
-
-static inline void io_apic_write(unsigned int apic, unsigned int reg, unsigned int value)
-{
-	struct io_apic __iomem *io_apic = io_apic_base(apic);
-	writel(reg, &io_apic->index);
-	writel(value, &io_apic->data);
-}
-
-/*
- * Re-write a value: to be used for read-modify-write
- * cycles where the read already set up the index register.
- */
-static inline void io_apic_modify(unsigned int apic, unsigned int value)
-{
-	struct io_apic __iomem *io_apic = io_apic_base(apic);
-	writel(value, &io_apic->data);
-}
-
-static int io_apic_level_ack_pending(unsigned int irq)
-{
-	struct irq_pin_list *entry;
-	unsigned long flags;
-	int pending = 0;
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	entry = irq_2_pin + irq;
-	for (;;) {
-		unsigned int reg;
-		int pin;
-
-		pin = entry->pin;
-		if (pin == -1)
-			break;
-		reg = io_apic_read(entry->apic, 0x10 + pin*2);
-		/* Is the remote IRR bit set? */
-		pending |= (reg >> 14) & 1;
-		if (!entry->next)
-			break;
-		entry = irq_2_pin + entry->next;
-	}
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-	return pending;
-}
-
-/*
- * Synchronize the IO-APIC and the CPU by doing
- * a dummy read from the IO-APIC
- */
-static inline void io_apic_sync(unsigned int apic)
-{
-	struct io_apic __iomem *io_apic = io_apic_base(apic);
-	readl(&io_apic->data);
-}
-
-#define __DO_ACTION(R, ACTION, FINAL)					\
-									\
-{									\
-	int pin;							\
-	struct irq_pin_list *entry = irq_2_pin + irq;			\
-									\
-	BUG_ON(irq >= NR_IRQS);						\
-	for (;;) {							\
-		unsigned int reg;					\
-		pin = entry->pin;					\
-		if (pin == -1)						\
-			break;						\
-		reg = io_apic_read(entry->apic, 0x10 + R + pin*2);	\
-		reg ACTION;						\
-		io_apic_modify(entry->apic, reg);			\
-		FINAL;							\
-		if (!entry->next)					\
-			break;						\
-		entry = irq_2_pin + entry->next;			\
-	}								\
-}
-
-union entry_union {
-	struct { u32 w1, w2; };
-	struct IO_APIC_route_entry entry;
-};
-
-static struct IO_APIC_route_entry ioapic_read_entry(int apic, int pin)
-{
-	union entry_union eu;
-	unsigned long flags;
-	spin_lock_irqsave(&ioapic_lock, flags);
-	eu.w1 = io_apic_read(apic, 0x10 + 2 * pin);
-	eu.w2 = io_apic_read(apic, 0x11 + 2 * pin);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-	return eu.entry;
-}
-
-/*
- * When we write a new IO APIC routing entry, we need to write the high
- * word first! If the mask bit in the low word is clear, we will enable
- * the interrupt, and we need to make sure the entry is fully populated
- * before that happens.
- */
-static void
-__ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e)
-{
-	union entry_union eu;
-	eu.entry = e;
-	io_apic_write(apic, 0x11 + 2*pin, eu.w2);
-	io_apic_write(apic, 0x10 + 2*pin, eu.w1);
-}
-
-static void ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e)
-{
-	unsigned long flags;
-	spin_lock_irqsave(&ioapic_lock, flags);
-	__ioapic_write_entry(apic, pin, e);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-}
-
-/*
- * When we mask an IO APIC routing entry, we need to write the low
- * word first, in order to set the mask bit before we change the
- * high bits!
- */
-static void ioapic_mask_entry(int apic, int pin)
-{
-	unsigned long flags;
-	union entry_union eu = { .entry.mask = 1 };
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	io_apic_write(apic, 0x10 + 2*pin, eu.w1);
-	io_apic_write(apic, 0x11 + 2*pin, eu.w2);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-}
-
-#ifdef CONFIG_SMP
-static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, u8 vector)
-{
-	int apic, pin;
-	struct irq_pin_list *entry = irq_2_pin + irq;
-
-	BUG_ON(irq >= NR_IRQS);
-	for (;;) {
-		unsigned int reg;
-		apic = entry->apic;
-		pin = entry->pin;
-		if (pin == -1)
-			break;
-		io_apic_write(apic, 0x11 + pin*2, dest);
-		reg = io_apic_read(apic, 0x10 + pin*2);
-		reg &= ~0x000000ff;
-		reg |= vector;
-		io_apic_modify(apic, reg);
-		if (!entry->next)
-			break;
-		entry = irq_2_pin + entry->next;
-	}
-}
-
-static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t mask)
-{
-	struct irq_cfg *cfg = irq_cfg + irq;
-	unsigned long flags;
-	unsigned int dest;
-	cpumask_t tmp;
-
-	cpus_and(tmp, mask, cpu_online_map);
-	if (cpus_empty(tmp))
-		return;
-
-	if (assign_irq_vector(irq, mask))
-		return;
-
-	cpus_and(tmp, cfg->domain, mask);
-	dest = cpu_mask_to_apicid(tmp);
-
-	/*
-	 * Only the high 8 bits are valid.
-	 */
-	dest = SET_APIC_LOGICAL_ID(dest);
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	__target_IO_APIC_irq(irq, dest, cfg->vector);
-	irq_desc[irq].affinity = mask;
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-}
-#endif
-
-/*
- * The common case is 1:1 IRQ<->pin mappings. Sometimes there are
- * shared ISA-space IRQs, so we have to support them. We are super
- * fast in the common case, and fast for shared ISA-space IRQs.
- */
-static void add_pin_to_irq(unsigned int irq, int apic, int pin)
-{
-	static int first_free_entry = NR_IRQS;
-	struct irq_pin_list *entry = irq_2_pin + irq;
-
-	BUG_ON(irq >= NR_IRQS);
-	while (entry->next)
-		entry = irq_2_pin + entry->next;
-
-	if (entry->pin != -1) {
-		entry->next = first_free_entry;
-		entry = irq_2_pin + entry->next;
-		if (++first_free_entry >= PIN_MAP_SIZE)
-			panic("io_apic.c: ran out of irq_2_pin entries!");
-	}
-	entry->apic = apic;
-	entry->pin = pin;
-}
-
-
-#define DO_ACTION(name,R,ACTION, FINAL)					\
-									\
-	static void name##_IO_APIC_irq (unsigned int irq)		\
-	__DO_ACTION(R, ACTION, FINAL)
-
-DO_ACTION( __mask,             0, |= 0x00010000, io_apic_sync(entry->apic) )
-						/* mask = 1 */
-DO_ACTION( __unmask,           0, &= 0xfffeffff, )
-						/* mask = 0 */
-
-static void mask_IO_APIC_irq (unsigned int irq)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	__mask_IO_APIC_irq(irq);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-}
-
-static void unmask_IO_APIC_irq (unsigned int irq)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	__unmask_IO_APIC_irq(irq);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-}
-
-static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin)
-{
-	struct IO_APIC_route_entry entry;
-
-	/* Check delivery_mode to be sure we're not clearing an SMI pin */
-	entry = ioapic_read_entry(apic, pin);
-	if (entry.delivery_mode == dest_SMI)
-		return;
-	/*
-	 * Disable it in the IO-APIC irq-routing table:
-	 */
-	ioapic_mask_entry(apic, pin);
-}
-
-static void clear_IO_APIC (void)
-{
-	int apic, pin;
-
-	for (apic = 0; apic < nr_ioapics; apic++)
-		for (pin = 0; pin < nr_ioapic_registers[apic]; pin++)
-			clear_IO_APIC_pin(apic, pin);
-}
-
-int skip_ioapic_setup;
-int ioapic_force;
-
-static int __init parse_noapic(char *str)
-{
-	disable_ioapic_setup();
-	return 0;
-}
-early_param("noapic", parse_noapic);
-
-/* Actually the next is obsolete, but keep it for paranoid reasons -AK */
-static int __init disable_timer_pin_setup(char *arg)
-{
-	disable_timer_pin_1 = 1;
-	return 1;
-}
-__setup("disable_timer_pin_1", disable_timer_pin_setup);
-
-static int __init setup_disable_8254_timer(char *s)
-{
-	timer_over_8254 = -1;
-	return 1;
-}
-static int __init setup_enable_8254_timer(char *s)
-{
-	timer_over_8254 = 2;
-	return 1;
-}
-
-__setup("disable_8254_timer", setup_disable_8254_timer);
-__setup("enable_8254_timer", setup_enable_8254_timer);
-
-
-/*
- * Find the IRQ entry number of a certain pin.
- */
-static int find_irq_entry(int apic, int pin, int type)
-{
-	int i;
-
-	for (i = 0; i < mp_irq_entries; i++)
-		if (mp_irqs[i].mpc_irqtype == type &&
-		    (mp_irqs[i].mpc_dstapic == mp_ioapics[apic].mpc_apicid ||
-		     mp_irqs[i].mpc_dstapic == MP_APIC_ALL) &&
-		    mp_irqs[i].mpc_dstirq == pin)
-			return i;
-
-	return -1;
-}
-
-/*
- * Find the pin to which IRQ[irq] (ISA) is connected
- */
-static int __init find_isa_irq_pin(int irq, int type)
-{
-	int i;
-
-	for (i = 0; i < mp_irq_entries; i++) {
-		int lbus = mp_irqs[i].mpc_srcbus;
-
-		if (test_bit(lbus, mp_bus_not_pci) &&
-		    (mp_irqs[i].mpc_irqtype == type) &&
-		    (mp_irqs[i].mpc_srcbusirq == irq))
-
-			return mp_irqs[i].mpc_dstirq;
-	}
-	return -1;
-}
-
-static int __init find_isa_irq_apic(int irq, int type)
-{
-	int i;
-
-	for (i = 0; i < mp_irq_entries; i++) {
-		int lbus = mp_irqs[i].mpc_srcbus;
-
-		if (test_bit(lbus, mp_bus_not_pci) &&
-		    (mp_irqs[i].mpc_irqtype == type) &&
-		    (mp_irqs[i].mpc_srcbusirq == irq))
-			break;
-	}
-	if (i < mp_irq_entries) {
-		int apic;
-		for(apic = 0; apic < nr_ioapics; apic++) {
-			if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic)
-				return apic;
-		}
-	}
-
-	return -1;
-}
-
-/*
- * Find a specific PCI IRQ entry.
- * Not an __init, possibly needed by modules
- */
-static int pin_2_irq(int idx, int apic, int pin);
-
-int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin)
-{
-	int apic, i, best_guess = -1;
-
-	apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n",
-		bus, slot, pin);
-	if (mp_bus_id_to_pci_bus[bus] == -1) {
-		apic_printk(APIC_VERBOSE, "PCI BIOS passed nonexistent PCI bus %d!\n", bus);
-		return -1;
-	}
-	for (i = 0; i < mp_irq_entries; i++) {
-		int lbus = mp_irqs[i].mpc_srcbus;
-
-		for (apic = 0; apic < nr_ioapics; apic++)
-			if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic ||
-			    mp_irqs[i].mpc_dstapic == MP_APIC_ALL)
-				break;
-
-		if (!test_bit(lbus, mp_bus_not_pci) &&
-		    !mp_irqs[i].mpc_irqtype &&
-		    (bus == lbus) &&
-		    (slot == ((mp_irqs[i].mpc_srcbusirq >> 2) & 0x1f))) {
-			int irq = pin_2_irq(i,apic,mp_irqs[i].mpc_dstirq);
-
-			if (!(apic || IO_APIC_IRQ(irq)))
-				continue;
-
-			if (pin == (mp_irqs[i].mpc_srcbusirq & 3))
-				return irq;
-			/*
-			 * Use the first all-but-pin matching entry as a
-			 * best-guess fuzzy result for broken mptables.
-			 */
-			if (best_guess < 0)
-				best_guess = irq;
-		}
-	}
-	BUG_ON(best_guess >= NR_IRQS);
-	return best_guess;
-}
-
-/* ISA interrupts are always polarity zero edge triggered,
- * when listed as conforming in the MP table. */
-
-#define default_ISA_trigger(idx)	(0)
-#define default_ISA_polarity(idx)	(0)
-
-/* PCI interrupts are always polarity one level triggered,
- * when listed as conforming in the MP table. */
-
-#define default_PCI_trigger(idx)	(1)
-#define default_PCI_polarity(idx)	(1)
-
-static int __init MPBIOS_polarity(int idx)
-{
-	int bus = mp_irqs[idx].mpc_srcbus;
-	int polarity;
-
-	/*
-	 * Determine IRQ line polarity (high active or low active):
-	 */
-	switch (mp_irqs[idx].mpc_irqflag & 3)
-	{
-		case 0: /* conforms, ie. bus-type dependent polarity */
-			if (test_bit(bus, mp_bus_not_pci))
-				polarity = default_ISA_polarity(idx);
-			else
-				polarity = default_PCI_polarity(idx);
-			break;
-		case 1: /* high active */
-		{
-			polarity = 0;
-			break;
-		}
-		case 2: /* reserved */
-		{
-			printk(KERN_WARNING "broken BIOS!!\n");
-			polarity = 1;
-			break;
-		}
-		case 3: /* low active */
-		{
-			polarity = 1;
-			break;
-		}
-		default: /* invalid */
-		{
-			printk(KERN_WARNING "broken BIOS!!\n");
-			polarity = 1;
-			break;
-		}
-	}
-	return polarity;
-}
-
-static int MPBIOS_trigger(int idx)
-{
-	int bus = mp_irqs[idx].mpc_srcbus;
-	int trigger;
-
-	/*
-	 * Determine IRQ trigger mode (edge or level sensitive):
-	 */
-	switch ((mp_irqs[idx].mpc_irqflag>>2) & 3)
-	{
-		case 0: /* conforms, ie. bus-type dependent */
-			if (test_bit(bus, mp_bus_not_pci))
-				trigger = default_ISA_trigger(idx);
-			else
-				trigger = default_PCI_trigger(idx);
-			break;
-		case 1: /* edge */
-		{
-			trigger = 0;
-			break;
-		}
-		case 2: /* reserved */
-		{
-			printk(KERN_WARNING "broken BIOS!!\n");
-			trigger = 1;
-			break;
-		}
-		case 3: /* level */
-		{
-			trigger = 1;
-			break;
-		}
-		default: /* invalid */
-		{
-			printk(KERN_WARNING "broken BIOS!!\n");
-			trigger = 0;
-			break;
-		}
-	}
-	return trigger;
-}
-
-static inline int irq_polarity(int idx)
-{
-	return MPBIOS_polarity(idx);
-}
-
-static inline int irq_trigger(int idx)
-{
-	return MPBIOS_trigger(idx);
-}
-
-static int pin_2_irq(int idx, int apic, int pin)
-{
-	int irq, i;
-	int bus = mp_irqs[idx].mpc_srcbus;
-
-	/*
-	 * Debugging check, we are in big trouble if this message pops up!
-	 */
-	if (mp_irqs[idx].mpc_dstirq != pin)
-		printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n");
-
-	if (test_bit(bus, mp_bus_not_pci)) {
-		irq = mp_irqs[idx].mpc_srcbusirq;
-	} else {
-		/*
-		 * PCI IRQs are mapped in order
-		 */
-		i = irq = 0;
-		while (i < apic)
-			irq += nr_ioapic_registers[i++];
-		irq += pin;
-	}
-	BUG_ON(irq >= NR_IRQS);
-	return irq;
-}
-
-static int __assign_irq_vector(int irq, cpumask_t mask)
-{
-	/*
-	 * NOTE! The local APIC isn't very good at handling
-	 * multiple interrupts at the same interrupt level.
-	 * As the interrupt level is determined by taking the
-	 * vector number and shifting that right by 4, we
-	 * want to spread these out a bit so that they don't
-	 * all fall in the same interrupt level.
-	 *
-	 * Also, we've got to be careful not to trash gate
-	 * 0x80, because int 0x80 is hm, kind of importantish. ;)
-	 */
-	static int current_vector = FIRST_DEVICE_VECTOR, current_offset = 0;
-	unsigned int old_vector;
-	int cpu;
-	struct irq_cfg *cfg;
-
-	BUG_ON((unsigned)irq >= NR_IRQS);
-	cfg = &irq_cfg[irq];
-
-	/* Only try and allocate irqs on cpus that are present */
-	cpus_and(mask, mask, cpu_online_map);
-
-	if ((cfg->move_in_progress) || cfg->move_cleanup_count)
-		return -EBUSY;
-
-	old_vector = cfg->vector;
-	if (old_vector) {
-		cpumask_t tmp;
-		cpus_and(tmp, cfg->domain, mask);
-		if (!cpus_empty(tmp))
-			return 0;
-	}
-
-	for_each_cpu_mask(cpu, mask) {
-		cpumask_t domain, new_mask;
-		int new_cpu;
-		int vector, offset;
-
-		domain = vector_allocation_domain(cpu);
-		cpus_and(new_mask, domain, cpu_online_map);
-
-		vector = current_vector;
-		offset = current_offset;
-next:
-		vector += 8;
-		if (vector >= FIRST_SYSTEM_VECTOR) {
-			/* If we run out of vectors on large boxen, must share them. */
-			offset = (offset + 1) % 8;
-			vector = FIRST_DEVICE_VECTOR + offset;
-		}
-		if (unlikely(current_vector == vector))
-			continue;
-		if (vector == IA32_SYSCALL_VECTOR)
-			goto next;
-		for_each_cpu_mask(new_cpu, new_mask)
-			if (per_cpu(vector_irq, new_cpu)[vector] != -1)
-				goto next;
-		/* Found one! */
-		current_vector = vector;
-		current_offset = offset;
-		if (old_vector) {
-			cfg->move_in_progress = 1;
-			cfg->old_domain = cfg->domain;
-		}
-		for_each_cpu_mask(new_cpu, new_mask)
-			per_cpu(vector_irq, new_cpu)[vector] = irq;
-		cfg->vector = vector;
-		cfg->domain = domain;
-		return 0;
-	}
-	return -ENOSPC;
-}
-
-static int assign_irq_vector(int irq, cpumask_t mask)
-{
-	int err;
-	unsigned long flags;
-
-	spin_lock_irqsave(&vector_lock, flags);
-	err = __assign_irq_vector(irq, mask);
-	spin_unlock_irqrestore(&vector_lock, flags);
-	return err;
-}
-
-static void __clear_irq_vector(int irq)
-{
-	struct irq_cfg *cfg;
-	cpumask_t mask;
-	int cpu, vector;
-
-	BUG_ON((unsigned)irq >= NR_IRQS);
-	cfg = &irq_cfg[irq];
-	BUG_ON(!cfg->vector);
-
-	vector = cfg->vector;
-	cpus_and(mask, cfg->domain, cpu_online_map);
-	for_each_cpu_mask(cpu, mask)
-		per_cpu(vector_irq, cpu)[vector] = -1;
-
-	cfg->vector = 0;
-	cfg->domain = CPU_MASK_NONE;
-}
-
-void __setup_vector_irq(int cpu)
-{
-	/* Initialize vector_irq on a new cpu */
-	/* This function must be called with vector_lock held */
-	int irq, vector;
-
-	/* Mark the inuse vectors */
-	for (irq = 0; irq < NR_IRQS; ++irq) {
-		if (!cpu_isset(cpu, irq_cfg[irq].domain))
-			continue;
-		vector = irq_cfg[irq].vector;
-		per_cpu(vector_irq, cpu)[vector] = irq;
-	}
-	/* Mark the free vectors */
-	for (vector = 0; vector < NR_VECTORS; ++vector) {
-		irq = per_cpu(vector_irq, cpu)[vector];
-		if (irq < 0)
-			continue;
-		if (!cpu_isset(cpu, irq_cfg[irq].domain))
-			per_cpu(vector_irq, cpu)[vector] = -1;
-	}
-}
-
-
-static struct irq_chip ioapic_chip;
-
-static void ioapic_register_intr(int irq, unsigned long trigger)
-{
-	if (trigger) {
-		irq_desc[irq].status |= IRQ_LEVEL;
-		set_irq_chip_and_handler_name(irq, &ioapic_chip,
-					      handle_fasteoi_irq, "fasteoi");
-	} else {
-		irq_desc[irq].status &= ~IRQ_LEVEL;
-		set_irq_chip_and_handler_name(irq, &ioapic_chip,
-					      handle_edge_irq, "edge");
-	}
-}
-
-static void setup_IO_APIC_irq(int apic, int pin, unsigned int irq,
-			      int trigger, int polarity)
-{
-	struct irq_cfg *cfg = irq_cfg + irq;
-	struct IO_APIC_route_entry entry;
-	cpumask_t mask;
-
-	if (!IO_APIC_IRQ(irq))
-		return;
-
-	mask = TARGET_CPUS;
-	if (assign_irq_vector(irq, mask))
-		return;
-
-	cpus_and(mask, cfg->domain, mask);
-
-	apic_printk(APIC_VERBOSE,KERN_DEBUG
-		    "IOAPIC[%d]: Set routing entry (%d-%d -> 0x%x -> "
-		    "IRQ %d Mode:%i Active:%i)\n",
-		    apic, mp_ioapics[apic].mpc_apicid, pin, cfg->vector,
-		    irq, trigger, polarity);
-
-	/*
-	 * add it to the IO-APIC irq-routing table:
-	 */
-	memset(&entry,0,sizeof(entry));
-
-	entry.delivery_mode = INT_DELIVERY_MODE;
-	entry.dest_mode = INT_DEST_MODE;
-	entry.dest = cpu_mask_to_apicid(mask);
-	entry.mask = 0;				/* enable IRQ */
-	entry.trigger = trigger;
-	entry.polarity = polarity;
-	entry.vector = cfg->vector;
-
-	/* Mask level triggered irqs.
-	 * Use IRQ_DELAYED_DISABLE for edge triggered irqs.
-	 */
-	if (trigger)
-		entry.mask = 1;
-
-	ioapic_register_intr(irq, trigger);
-	if (irq < 16)
-		disable_8259A_irq(irq);
-
-	ioapic_write_entry(apic, pin, entry);
-}
-
-static void __init setup_IO_APIC_irqs(void)
-{
-	int apic, pin, idx, irq, first_notcon = 1;
-
-	apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n");
-
-	for (apic = 0; apic < nr_ioapics; apic++) {
-	for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
-
-		idx = find_irq_entry(apic,pin,mp_INT);
-		if (idx == -1) {
-			if (first_notcon) {
-				apic_printk(APIC_VERBOSE, KERN_DEBUG " IO-APIC (apicid-pin) %d-%d", mp_ioapics[apic].mpc_apicid, pin);
-				first_notcon = 0;
-			} else
-				apic_printk(APIC_VERBOSE, ", %d-%d", mp_ioapics[apic].mpc_apicid, pin);
-			continue;
-		}
-
-		irq = pin_2_irq(idx, apic, pin);
-		add_pin_to_irq(irq, apic, pin);
-
-		setup_IO_APIC_irq(apic, pin, irq,
-				  irq_trigger(idx), irq_polarity(idx));
-	}
-	}
-
-	if (!first_notcon)
-		apic_printk(APIC_VERBOSE," not connected.\n");
-}
-
-/*
- * Set up the 8259A-master output pin as broadcast to all
- * CPUs.
- */
-static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, int vector)
-{
-	struct IO_APIC_route_entry entry;
-	unsigned long flags;
-
-	memset(&entry,0,sizeof(entry));
-
-	disable_8259A_irq(0);
-
-	/* mask LVT0 */
-	apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
-
-	/*
-	 * We use logical delivery to get the timer IRQ
-	 * to the first CPU.
-	 */
-	entry.dest_mode = INT_DEST_MODE;
-	entry.mask = 0;					/* unmask IRQ now */
-	entry.dest = cpu_mask_to_apicid(TARGET_CPUS);
-	entry.delivery_mode = INT_DELIVERY_MODE;
-	entry.polarity = 0;
-	entry.trigger = 0;
-	entry.vector = vector;
-
-	/*
-	 * The timer IRQ doesn't have to know that behind the
-	 * scene we have a 8259A-master in AEOI mode ...
-	 */
-	set_irq_chip_and_handler_name(0, &ioapic_chip, handle_edge_irq, "edge");
-
-	/*
-	 * Add it to the IO-APIC irq-routing table:
-	 */
-	spin_lock_irqsave(&ioapic_lock, flags);
-	io_apic_write(apic, 0x11+2*pin, *(((int *)&entry)+1));
-	io_apic_write(apic, 0x10+2*pin, *(((int *)&entry)+0));
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-
-	enable_8259A_irq(0);
-}
-
-void __apicdebuginit print_IO_APIC(void)
-{
-	int apic, i;
-	union IO_APIC_reg_00 reg_00;
-	union IO_APIC_reg_01 reg_01;
-	union IO_APIC_reg_02 reg_02;
-	unsigned long flags;
-
-	if (apic_verbosity == APIC_QUIET)
-		return;
-
-	printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries);
-	for (i = 0; i < nr_ioapics; i++)
-		printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n",
-		       mp_ioapics[i].mpc_apicid, nr_ioapic_registers[i]);
-
-	/*
-	 * We are a bit conservative about what we expect.  We have to
-	 * know about every hardware change ASAP.
-	 */
-	printk(KERN_INFO "testing the IO APIC.......................\n");
-
-	for (apic = 0; apic < nr_ioapics; apic++) {
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	reg_00.raw = io_apic_read(apic, 0);
-	reg_01.raw = io_apic_read(apic, 1);
-	if (reg_01.bits.version >= 0x10)
-		reg_02.raw = io_apic_read(apic, 2);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-
-	printk("\n");
-	printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mpc_apicid);
-	printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw);
-	printk(KERN_DEBUG ".......    : physical APIC id: %02X\n", reg_00.bits.ID);
-
-	printk(KERN_DEBUG ".... register #01: %08X\n", *(int *)&reg_01);
-	printk(KERN_DEBUG ".......     : max redirection entries: %04X\n", reg_01.bits.entries);
-
-	printk(KERN_DEBUG ".......     : PRQ implemented: %X\n", reg_01.bits.PRQ);
-	printk(KERN_DEBUG ".......     : IO APIC version: %04X\n", reg_01.bits.version);
-
-	if (reg_01.bits.version >= 0x10) {
-		printk(KERN_DEBUG ".... register #02: %08X\n", reg_02.raw);
-		printk(KERN_DEBUG ".......     : arbitration: %02X\n", reg_02.bits.arbitration);
-	}
-
-	printk(KERN_DEBUG ".... IRQ redirection table:\n");
-
-	printk(KERN_DEBUG " NR Dst Mask Trig IRR Pol"
-			  " Stat Dmod Deli Vect:   \n");
-
-	for (i = 0; i <= reg_01.bits.entries; i++) {
-		struct IO_APIC_route_entry entry;
-
-		entry = ioapic_read_entry(apic, i);
-
-		printk(KERN_DEBUG " %02x %03X ",
-			i,
-			entry.dest
-		);
-
-		printk("%1d    %1d    %1d   %1d   %1d    %1d    %1d    %02X\n",
-			entry.mask,
-			entry.trigger,
-			entry.irr,
-			entry.polarity,
-			entry.delivery_status,
-			entry.dest_mode,
-			entry.delivery_mode,
-			entry.vector
-		);
-	}
-	}
-	printk(KERN_DEBUG "IRQ to pin mappings:\n");
-	for (i = 0; i < NR_IRQS; i++) {
-		struct irq_pin_list *entry = irq_2_pin + i;
-		if (entry->pin < 0)
-			continue;
-		printk(KERN_DEBUG "IRQ%d ", i);
-		for (;;) {
-			printk("-> %d:%d", entry->apic, entry->pin);
-			if (!entry->next)
-				break;
-			entry = irq_2_pin + entry->next;
-		}
-		printk("\n");
-	}
-
-	printk(KERN_INFO ".................................... done.\n");
-
-	return;
-}
-
-#if 0
-
-static __apicdebuginit void print_APIC_bitfield (int base)
-{
-	unsigned int v;
-	int i, j;
-
-	if (apic_verbosity == APIC_QUIET)
-		return;
-
-	printk(KERN_DEBUG "0123456789abcdef0123456789abcdef\n" KERN_DEBUG);
-	for (i = 0; i < 8; i++) {
-		v = apic_read(base + i*0x10);
-		for (j = 0; j < 32; j++) {
-			if (v & (1<<j))
-				printk("1");
-			else
-				printk("0");
-		}
-		printk("\n");
-	}
-}
-
-void __apicdebuginit print_local_APIC(void * dummy)
-{
-	unsigned int v, ver, maxlvt;
-
-	if (apic_verbosity == APIC_QUIET)
-		return;
-
-	printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
-		smp_processor_id(), hard_smp_processor_id());
-	v = apic_read(APIC_ID);
-	printk(KERN_INFO "... APIC ID:      %08x (%01x)\n", v, GET_APIC_ID(v));
-	v = apic_read(APIC_LVR);
-	printk(KERN_INFO "... APIC VERSION: %08x\n", v);
-	ver = GET_APIC_VERSION(v);
-	maxlvt = get_maxlvt();
-
-	v = apic_read(APIC_TASKPRI);
-	printk(KERN_DEBUG "... APIC TASKPRI: %08x (%02x)\n", v, v & APIC_TPRI_MASK);
-
-	v = apic_read(APIC_ARBPRI);
-	printk(KERN_DEBUG "... APIC ARBPRI: %08x (%02x)\n", v,
-		v & APIC_ARBPRI_MASK);
-	v = apic_read(APIC_PROCPRI);
-	printk(KERN_DEBUG "... APIC PROCPRI: %08x\n", v);
-
-	v = apic_read(APIC_EOI);
-	printk(KERN_DEBUG "... APIC EOI: %08x\n", v);
-	v = apic_read(APIC_RRR);
-	printk(KERN_DEBUG "... APIC RRR: %08x\n", v);
-	v = apic_read(APIC_LDR);
-	printk(KERN_DEBUG "... APIC LDR: %08x\n", v);
-	v = apic_read(APIC_DFR);
-	printk(KERN_DEBUG "... APIC DFR: %08x\n", v);
-	v = apic_read(APIC_SPIV);
-	printk(KERN_DEBUG "... APIC SPIV: %08x\n", v);
-
-	printk(KERN_DEBUG "... APIC ISR field:\n");
-	print_APIC_bitfield(APIC_ISR);
-	printk(KERN_DEBUG "... APIC TMR field:\n");
-	print_APIC_bitfield(APIC_TMR);
-	printk(KERN_DEBUG "... APIC IRR field:\n");
-	print_APIC_bitfield(APIC_IRR);
-
-	v = apic_read(APIC_ESR);
-	printk(KERN_DEBUG "... APIC ESR: %08x\n", v);
-
-	v = apic_read(APIC_ICR);
-	printk(KERN_DEBUG "... APIC ICR: %08x\n", v);
-	v = apic_read(APIC_ICR2);
-	printk(KERN_DEBUG "... APIC ICR2: %08x\n", v);
-
-	v = apic_read(APIC_LVTT);
-	printk(KERN_DEBUG "... APIC LVTT: %08x\n", v);
-
-	if (maxlvt > 3) {                       /* PC is LVT#4. */
-		v = apic_read(APIC_LVTPC);
-		printk(KERN_DEBUG "... APIC LVTPC: %08x\n", v);
-	}
-	v = apic_read(APIC_LVT0);
-	printk(KERN_DEBUG "... APIC LVT0: %08x\n", v);
-	v = apic_read(APIC_LVT1);
-	printk(KERN_DEBUG "... APIC LVT1: %08x\n", v);
-
-	if (maxlvt > 2) {			/* ERR is LVT#3. */
-		v = apic_read(APIC_LVTERR);
-		printk(KERN_DEBUG "... APIC LVTERR: %08x\n", v);
-	}
-
-	v = apic_read(APIC_TMICT);
-	printk(KERN_DEBUG "... APIC TMICT: %08x\n", v);
-	v = apic_read(APIC_TMCCT);
-	printk(KERN_DEBUG "... APIC TMCCT: %08x\n", v);
-	v = apic_read(APIC_TDCR);
-	printk(KERN_DEBUG "... APIC TDCR: %08x\n", v);
-	printk("\n");
-}
-
-void print_all_local_APICs (void)
-{
-	on_each_cpu(print_local_APIC, NULL, 1, 1);
-}
-
-void __apicdebuginit print_PIC(void)
-{
-	unsigned int v;
-	unsigned long flags;
-
-	if (apic_verbosity == APIC_QUIET)
-		return;
-
-	printk(KERN_DEBUG "\nprinting PIC contents\n");
-
-	spin_lock_irqsave(&i8259A_lock, flags);
-
-	v = inb(0xa1) << 8 | inb(0x21);
-	printk(KERN_DEBUG "... PIC  IMR: %04x\n", v);
-
-	v = inb(0xa0) << 8 | inb(0x20);
-	printk(KERN_DEBUG "... PIC  IRR: %04x\n", v);
-
-	outb(0x0b,0xa0);
-	outb(0x0b,0x20);
-	v = inb(0xa0) << 8 | inb(0x20);
-	outb(0x0a,0xa0);
-	outb(0x0a,0x20);
-
-	spin_unlock_irqrestore(&i8259A_lock, flags);
-
-	printk(KERN_DEBUG "... PIC  ISR: %04x\n", v);
-
-	v = inb(0x4d1) << 8 | inb(0x4d0);
-	printk(KERN_DEBUG "... PIC ELCR: %04x\n", v);
-}
-
-#endif  /*  0  */
-
-static void __init enable_IO_APIC(void)
-{
-	union IO_APIC_reg_01 reg_01;
-	int i8259_apic, i8259_pin;
-	int i, apic;
-	unsigned long flags;
-
-	for (i = 0; i < PIN_MAP_SIZE; i++) {
-		irq_2_pin[i].pin = -1;
-		irq_2_pin[i].next = 0;
-	}
-
-	/*
-	 * The number of IO-APIC IRQ registers (== #pins):
-	 */
-	for (apic = 0; apic < nr_ioapics; apic++) {
-		spin_lock_irqsave(&ioapic_lock, flags);
-		reg_01.raw = io_apic_read(apic, 1);
-		spin_unlock_irqrestore(&ioapic_lock, flags);
-		nr_ioapic_registers[apic] = reg_01.bits.entries+1;
-	}
-	for(apic = 0; apic < nr_ioapics; apic++) {
-		int pin;
-		/* See if any of the pins is in ExtINT mode */
-		for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
-			struct IO_APIC_route_entry entry;
-			entry = ioapic_read_entry(apic, pin);
-
-			/* If the interrupt line is enabled and in ExtInt mode
-			 * I have found the pin where the i8259 is connected.
-			 */
-			if ((entry.mask == 0) && (entry.delivery_mode == dest_ExtINT)) {
-				ioapic_i8259.apic = apic;
-				ioapic_i8259.pin  = pin;
-				goto found_i8259;
-			}
-		}
-	}
- found_i8259:
-	/* Look to see what if the MP table has reported the ExtINT */
-	i8259_pin  = find_isa_irq_pin(0, mp_ExtINT);
-	i8259_apic = find_isa_irq_apic(0, mp_ExtINT);
-	/* Trust the MP table if nothing is setup in the hardware */
-	if ((ioapic_i8259.pin == -1) && (i8259_pin >= 0)) {
-		printk(KERN_WARNING "ExtINT not setup in hardware but reported by MP table\n");
-		ioapic_i8259.pin  = i8259_pin;
-		ioapic_i8259.apic = i8259_apic;
-	}
-	/* Complain if the MP table and the hardware disagree */
-	if (((ioapic_i8259.apic != i8259_apic) || (ioapic_i8259.pin != i8259_pin)) &&
-		(i8259_pin >= 0) && (ioapic_i8259.pin >= 0))
-	{
-		printk(KERN_WARNING "ExtINT in hardware and MP table differ\n");
-	}
-
-	/*
-	 * Do not trust the IO-APIC being empty at bootup
-	 */
-	clear_IO_APIC();
-}
-
-/*
- * Not an __init, needed by the reboot code
- */
-void disable_IO_APIC(void)
-{
-	/*
-	 * Clear the IO-APIC before rebooting:
-	 */
-	clear_IO_APIC();
-
-	/*
-	 * If the i8259 is routed through an IOAPIC
-	 * Put that IOAPIC in virtual wire mode
-	 * so legacy interrupts can be delivered.
-	 */
-	if (ioapic_i8259.pin != -1) {
-		struct IO_APIC_route_entry entry;
-
-		memset(&entry, 0, sizeof(entry));
-		entry.mask            = 0; /* Enabled */
-		entry.trigger         = 0; /* Edge */
-		entry.irr             = 0;
-		entry.polarity        = 0; /* High */
-		entry.delivery_status = 0;
-		entry.dest_mode       = 0; /* Physical */
-		entry.delivery_mode   = dest_ExtINT; /* ExtInt */
-		entry.vector          = 0;
-		entry.dest          = GET_APIC_ID(apic_read(APIC_ID));
-
-		/*
-		 * Add it to the IO-APIC irq-routing table:
-		 */
-		ioapic_write_entry(ioapic_i8259.apic, ioapic_i8259.pin, entry);
-	}
-
-	disconnect_bsp_APIC(ioapic_i8259.pin != -1);
-}
-
-/*
- * There is a nasty bug in some older SMP boards, their mptable lies
- * about the timer IRQ. We do the following to work around the situation:
- *
- *	- timer IRQ defaults to IO-APIC IRQ
- *	- if this function detects that timer IRQs are defunct, then we fall
- *	  back to ISA timer IRQs
- */
-static int __init timer_irq_works(void)
-{
-	unsigned long t1 = jiffies;
-
-	local_irq_enable();
-	/* Let ten ticks pass... */
-	mdelay((10 * 1000) / HZ);
-
-	/*
-	 * Expect a few ticks at least, to be sure some possible
-	 * glue logic does not lock up after one or two first
-	 * ticks in a non-ExtINT mode.  Also the local APIC
-	 * might have cached one ExtINT interrupt.  Finally, at
-	 * least one tick may be lost due to delays.
-	 */
-
-	/* jiffies wrap? */
-	if (jiffies - t1 > 4)
-		return 1;
-	return 0;
-}
-
-/*
- * In the SMP+IOAPIC case it might happen that there are an unspecified
- * number of pending IRQ events unhandled. These cases are very rare,
- * so we 'resend' these IRQs via IPIs, to the same CPU. It's much
- * better to do it this way as thus we do not have to be aware of
- * 'pending' interrupts in the IRQ path, except at this point.
- */
-/*
- * Edge triggered needs to resend any interrupt
- * that was delayed but this is now handled in the device
- * independent code.
- */
-
-/*
- * Starting up a edge-triggered IO-APIC interrupt is
- * nasty - we need to make sure that we get the edge.
- * If it is already asserted for some reason, we need
- * return 1 to indicate that is was pending.
- *
- * This is not complete - we should be able to fake
- * an edge even if it isn't on the 8259A...
- */
-
-static unsigned int startup_ioapic_irq(unsigned int irq)
-{
-	int was_pending = 0;
-	unsigned long flags;
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	if (irq < 16) {
-		disable_8259A_irq(irq);
-		if (i8259A_irq_pending(irq))
-			was_pending = 1;
-	}
-	__unmask_IO_APIC_irq(irq);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-
-	return was_pending;
-}
-
-static int ioapic_retrigger_irq(unsigned int irq)
-{
-	struct irq_cfg *cfg = &irq_cfg[irq];
-	cpumask_t mask;
-	unsigned long flags;
-
-	spin_lock_irqsave(&vector_lock, flags);
-	cpus_clear(mask);
-	cpu_set(first_cpu(cfg->domain), mask);
-
-	send_IPI_mask(mask, cfg->vector);
-	spin_unlock_irqrestore(&vector_lock, flags);
-
-	return 1;
-}
-
-/*
- * Level and edge triggered IO-APIC interrupts need different handling,
- * so we use two separate IRQ descriptors. Edge triggered IRQs can be
- * handled with the level-triggered descriptor, but that one has slightly
- * more overhead. Level-triggered interrupts cannot be handled with the
- * edge-triggered handler, without risking IRQ storms and other ugly
- * races.
- */
-
-#ifdef CONFIG_SMP
-asmlinkage void smp_irq_move_cleanup_interrupt(void)
-{
-	unsigned vector, me;
-	ack_APIC_irq();
-	exit_idle();
-	irq_enter();
-
-	me = smp_processor_id();
-	for (vector = FIRST_EXTERNAL_VECTOR; vector < NR_VECTORS; vector++) {
-		unsigned int irq;
-		struct irq_desc *desc;
-		struct irq_cfg *cfg;
-		irq = __get_cpu_var(vector_irq)[vector];
-		if (irq >= NR_IRQS)
-			continue;
-
-		desc = irq_desc + irq;
-		cfg = irq_cfg + irq;
-		spin_lock(&desc->lock);
-		if (!cfg->move_cleanup_count)
-			goto unlock;
-
-		if ((vector == cfg->vector) && cpu_isset(me, cfg->domain))
-			goto unlock;
-
-		__get_cpu_var(vector_irq)[vector] = -1;
-		cfg->move_cleanup_count--;
-unlock:
-		spin_unlock(&desc->lock);
-	}
-
-	irq_exit();
-}
-
-static void irq_complete_move(unsigned int irq)
-{
-	struct irq_cfg *cfg = irq_cfg + irq;
-	unsigned vector, me;
-
-	if (likely(!cfg->move_in_progress))
-		return;
-
-	vector = ~get_irq_regs()->orig_rax;
-	me = smp_processor_id();
-	if ((vector == cfg->vector) && cpu_isset(me, cfg->domain)) {
-		cpumask_t cleanup_mask;
-
-		cpus_and(cleanup_mask, cfg->old_domain, cpu_online_map);
-		cfg->move_cleanup_count = cpus_weight(cleanup_mask);
-		send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR);
-		cfg->move_in_progress = 0;
-	}
-}
-#else
-static inline void irq_complete_move(unsigned int irq) {}
-#endif
-
-static void ack_apic_edge(unsigned int irq)
-{
-	irq_complete_move(irq);
-	move_native_irq(irq);
-	ack_APIC_irq();
-}
-
-static void ack_apic_level(unsigned int irq)
-{
-	int do_unmask_irq = 0;
-
-	irq_complete_move(irq);
-#if defined(CONFIG_GENERIC_PENDING_IRQ) || defined(CONFIG_IRQBALANCE)
-	/* If we are moving the irq we need to mask it */
-	if (unlikely(irq_desc[irq].status & IRQ_MOVE_PENDING)) {
-		do_unmask_irq = 1;
-		mask_IO_APIC_irq(irq);
-	}
-#endif
-
-	/*
-	 * We must acknowledge the irq before we move it or the acknowledge will
-	 * not propagate properly.
-	 */
-	ack_APIC_irq();
-
-	/* Now we can move and renable the irq */
-	if (unlikely(do_unmask_irq)) {
-		/* Only migrate the irq if the ack has been received.
-		 *
-		 * On rare occasions the broadcast level triggered ack gets
-		 * delayed going to ioapics, and if we reprogram the
-		 * vector while Remote IRR is still set the irq will never
-		 * fire again.
-		 *
-		 * To prevent this scenario we read the Remote IRR bit
-		 * of the ioapic.  This has two effects.
-		 * - On any sane system the read of the ioapic will
-		 *   flush writes (and acks) going to the ioapic from
-		 *   this cpu.
-		 * - We get to see if the ACK has actually been delivered.
-		 *
-		 * Based on failed experiments of reprogramming the
-		 * ioapic entry from outside of irq context starting
-		 * with masking the ioapic entry and then polling until
-		 * Remote IRR was clear before reprogramming the
-		 * ioapic I don't trust the Remote IRR bit to be
-		 * completey accurate.
-		 *
-		 * However there appears to be no other way to plug
-		 * this race, so if the Remote IRR bit is not
-		 * accurate and is causing problems then it is a hardware bug
-		 * and you can go talk to the chipset vendor about it.
-		 */
-		if (!io_apic_level_ack_pending(irq))
-			move_masked_irq(irq);
-		unmask_IO_APIC_irq(irq);
-	}
-}
-
-static struct irq_chip ioapic_chip __read_mostly = {
-	.name 		= "IO-APIC",
-	.startup 	= startup_ioapic_irq,
-	.mask	 	= mask_IO_APIC_irq,
-	.unmask	 	= unmask_IO_APIC_irq,
-	.ack 		= ack_apic_edge,
-	.eoi 		= ack_apic_level,
-#ifdef CONFIG_SMP
-	.set_affinity 	= set_ioapic_affinity_irq,
-#endif
-	.retrigger	= ioapic_retrigger_irq,
-};
-
-static inline void init_IO_APIC_traps(void)
-{
-	int irq;
-
-	/*
-	 * NOTE! The local APIC isn't very good at handling
-	 * multiple interrupts at the same interrupt level.
-	 * As the interrupt level is determined by taking the
-	 * vector number and shifting that right by 4, we
-	 * want to spread these out a bit so that they don't
-	 * all fall in the same interrupt level.
-	 *
-	 * Also, we've got to be careful not to trash gate
-	 * 0x80, because int 0x80 is hm, kind of importantish. ;)
-	 */
-	for (irq = 0; irq < NR_IRQS ; irq++) {
-		int tmp = irq;
-		if (IO_APIC_IRQ(tmp) && !irq_cfg[tmp].vector) {
-			/*
-			 * Hmm.. We don't have an entry for this,
-			 * so default to an old-fashioned 8259
-			 * interrupt if we can..
-			 */
-			if (irq < 16)
-				make_8259A_irq(irq);
-			else
-				/* Strange. Oh, well.. */
-				irq_desc[irq].chip = &no_irq_chip;
-		}
-	}
-}
-
-static void enable_lapic_irq (unsigned int irq)
-{
-	unsigned long v;
-
-	v = apic_read(APIC_LVT0);
-	apic_write(APIC_LVT0, v & ~APIC_LVT_MASKED);
-}
-
-static void disable_lapic_irq (unsigned int irq)
-{
-	unsigned long v;
-
-	v = apic_read(APIC_LVT0);
-	apic_write(APIC_LVT0, v | APIC_LVT_MASKED);
-}
-
-static void ack_lapic_irq (unsigned int irq)
-{
-	ack_APIC_irq();
-}
-
-static void end_lapic_irq (unsigned int i) { /* nothing */ }
-
-static struct hw_interrupt_type lapic_irq_type __read_mostly = {
-	.name = "local-APIC",
-	.typename = "local-APIC-edge",
-	.startup = NULL, /* startup_irq() not used for IRQ0 */
-	.shutdown = NULL, /* shutdown_irq() not used for IRQ0 */
-	.enable = enable_lapic_irq,
-	.disable = disable_lapic_irq,
-	.ack = ack_lapic_irq,
-	.end = end_lapic_irq,
-};
-
-static void setup_nmi (void)
-{
-	/*
- 	 * Dirty trick to enable the NMI watchdog ...
-	 * We put the 8259A master into AEOI mode and
-	 * unmask on all local APICs LVT0 as NMI.
-	 *
-	 * The idea to use the 8259A in AEOI mode ('8259A Virtual Wire')
-	 * is from Maciej W. Rozycki - so we do not have to EOI from
-	 * the NMI handler or the timer interrupt.
-	 */ 
-	printk(KERN_INFO "activating NMI Watchdog ...");
-
-	enable_NMI_through_LVT0(NULL);
-
-	printk(" done.\n");
-}
-
-/*
- * This looks a bit hackish but it's about the only one way of sending
- * a few INTA cycles to 8259As and any associated glue logic.  ICR does
- * not support the ExtINT mode, unfortunately.  We need to send these
- * cycles as some i82489DX-based boards have glue logic that keeps the
- * 8259A interrupt line asserted until INTA.  --macro
- */
-static inline void unlock_ExtINT_logic(void)
-{
-	int apic, pin, i;
-	struct IO_APIC_route_entry entry0, entry1;
-	unsigned char save_control, save_freq_select;
-	unsigned long flags;
-
-	pin  = find_isa_irq_pin(8, mp_INT);
-	apic = find_isa_irq_apic(8, mp_INT);
-	if (pin == -1)
-		return;
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	*(((int *)&entry0) + 1) = io_apic_read(apic, 0x11 + 2 * pin);
-	*(((int *)&entry0) + 0) = io_apic_read(apic, 0x10 + 2 * pin);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-	clear_IO_APIC_pin(apic, pin);
-
-	memset(&entry1, 0, sizeof(entry1));
-
-	entry1.dest_mode = 0;			/* physical delivery */
-	entry1.mask = 0;			/* unmask IRQ now */
-	entry1.dest = hard_smp_processor_id();
-	entry1.delivery_mode = dest_ExtINT;
-	entry1.polarity = entry0.polarity;
-	entry1.trigger = 0;
-	entry1.vector = 0;
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry1) + 1));
-	io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry1) + 0));
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-
-	save_control = CMOS_READ(RTC_CONTROL);
-	save_freq_select = CMOS_READ(RTC_FREQ_SELECT);
-	CMOS_WRITE((save_freq_select & ~RTC_RATE_SELECT) | 0x6,
-		   RTC_FREQ_SELECT);
-	CMOS_WRITE(save_control | RTC_PIE, RTC_CONTROL);
-
-	i = 100;
-	while (i-- > 0) {
-		mdelay(10);
-		if ((CMOS_READ(RTC_INTR_FLAGS) & RTC_PF) == RTC_PF)
-			i -= 10;
-	}
-
-	CMOS_WRITE(save_control, RTC_CONTROL);
-	CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
-	clear_IO_APIC_pin(apic, pin);
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry0) + 1));
-	io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry0) + 0));
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-}
-
-/*
- * This code may look a bit paranoid, but it's supposed to cooperate with
- * a wide range of boards and BIOS bugs.  Fortunately only the timer IRQ
- * is so screwy.  Thanks to Brian Perkins for testing/hacking this beast
- * fanatically on his truly buggy board.
- *
- * FIXME: really need to revamp this for modern platforms only.
- */
-static inline void check_timer(void)
-{
-	struct irq_cfg *cfg = irq_cfg + 0;
-	int apic1, pin1, apic2, pin2;
-
-	/*
-	 * get/set the timer IRQ vector:
-	 */
-	disable_8259A_irq(0);
-	assign_irq_vector(0, TARGET_CPUS);
-
-	/*
-	 * Subtle, code in do_timer_interrupt() expects an AEOI
-	 * mode for the 8259A whenever interrupts are routed
-	 * through I/O APICs.  Also IRQ0 has to be enabled in
-	 * the 8259A which implies the virtual wire has to be
-	 * disabled in the local APIC.
-	 */
-	apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
-	init_8259A(1);
-	if (timer_over_8254 > 0)
-		enable_8259A_irq(0);
-
-	pin1  = find_isa_irq_pin(0, mp_INT);
-	apic1 = find_isa_irq_apic(0, mp_INT);
-	pin2  = ioapic_i8259.pin;
-	apic2 = ioapic_i8259.apic;
-
-	apic_printk(APIC_VERBOSE,KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n",
-		cfg->vector, apic1, pin1, apic2, pin2);
-
-	if (pin1 != -1) {
-		/*
-		 * Ok, does IRQ0 through the IOAPIC work?
-		 */
-		unmask_IO_APIC_irq(0);
-		if (!no_timer_check && timer_irq_works()) {
-			nmi_watchdog_default();
-			if (nmi_watchdog == NMI_IO_APIC) {
-				disable_8259A_irq(0);
-				setup_nmi();
-				enable_8259A_irq(0);
-			}
-			if (disable_timer_pin_1 > 0)
-				clear_IO_APIC_pin(0, pin1);
-			return;
-		}
-		clear_IO_APIC_pin(apic1, pin1);
-		apic_printk(APIC_QUIET,KERN_ERR "..MP-BIOS bug: 8254 timer not "
-				"connected to IO-APIC\n");
-	}
-
-	apic_printk(APIC_VERBOSE,KERN_INFO "...trying to set up timer (IRQ0) "
-				"through the 8259A ... ");
-	if (pin2 != -1) {
-		apic_printk(APIC_VERBOSE,"\n..... (found apic %d pin %d) ...",
-			apic2, pin2);
-		/*
-		 * legacy devices should be connected to IO APIC #0
-		 */
-		setup_ExtINT_IRQ0_pin(apic2, pin2, cfg->vector);
-		if (timer_irq_works()) {
-			apic_printk(APIC_VERBOSE," works.\n");
-			nmi_watchdog_default();
-			if (nmi_watchdog == NMI_IO_APIC) {
-				setup_nmi();
-			}
-			return;
-		}
-		/*
-		 * Cleanup, just in case ...
-		 */
-		clear_IO_APIC_pin(apic2, pin2);
-	}
-	apic_printk(APIC_VERBOSE," failed.\n");
-
-	if (nmi_watchdog == NMI_IO_APIC) {
-		printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n");
-		nmi_watchdog = 0;
-	}
-
-	apic_printk(APIC_VERBOSE, KERN_INFO "...trying to set up timer as Virtual Wire IRQ...");
-
-	disable_8259A_irq(0);
-	irq_desc[0].chip = &lapic_irq_type;
-	apic_write(APIC_LVT0, APIC_DM_FIXED | cfg->vector);	/* Fixed mode */
-	enable_8259A_irq(0);
-
-	if (timer_irq_works()) {
-		apic_printk(APIC_VERBOSE," works.\n");
-		return;
-	}
-	apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | cfg->vector);
-	apic_printk(APIC_VERBOSE," failed.\n");
-
-	apic_printk(APIC_VERBOSE, KERN_INFO "...trying to set up timer as ExtINT IRQ...");
-
-	init_8259A(0);
-	make_8259A_irq(0);
-	apic_write(APIC_LVT0, APIC_DM_EXTINT);
-
-	unlock_ExtINT_logic();
-
-	if (timer_irq_works()) {
-		apic_printk(APIC_VERBOSE," works.\n");
-		return;
-	}
-	apic_printk(APIC_VERBOSE," failed :(.\n");
-	panic("IO-APIC + timer doesn't work! Try using the 'noapic' kernel parameter\n");
-}
-
-static int __init notimercheck(char *s)
-{
-	no_timer_check = 1;
-	return 1;
-}
-__setup("no_timer_check", notimercheck);
-
-/*
- *
- * IRQ's that are handled by the PIC in the MPS IOAPIC case.
- * - IRQ2 is the cascade IRQ, and cannot be a io-apic IRQ.
- *   Linux doesn't really care, as it's not actually used
- *   for any interrupt handling anyway.
- */
-#define PIC_IRQS	(1<<2)
-
-void __init setup_IO_APIC(void)
-{
-	enable_IO_APIC();
-
-	if (acpi_ioapic)
-		io_apic_irqs = ~0;	/* all IRQs go through IOAPIC */
-	else
-		io_apic_irqs = ~PIC_IRQS;
-
-	apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n");
-
-	sync_Arb_IDs();
-	setup_IO_APIC_irqs();
-	init_IO_APIC_traps();
-	check_timer();
-	if (!acpi_ioapic)
-		print_IO_APIC();
-}
-
-struct sysfs_ioapic_data {
-	struct sys_device dev;
-	struct IO_APIC_route_entry entry[0];
-};
-static struct sysfs_ioapic_data * mp_ioapic_data[MAX_IO_APICS];
-
-static int ioapic_suspend(struct sys_device *dev, pm_message_t state)
-{
-	struct IO_APIC_route_entry *entry;
-	struct sysfs_ioapic_data *data;
-	int i;
-
-	data = container_of(dev, struct sysfs_ioapic_data, dev);
-	entry = data->entry;
-	for (i = 0; i < nr_ioapic_registers[dev->id]; i ++, entry ++ )
-		*entry = ioapic_read_entry(dev->id, i);
-
-	return 0;
-}
-
-static int ioapic_resume(struct sys_device *dev)
-{
-	struct IO_APIC_route_entry *entry;
-	struct sysfs_ioapic_data *data;
-	unsigned long flags;
-	union IO_APIC_reg_00 reg_00;
-	int i;
-
-	data = container_of(dev, struct sysfs_ioapic_data, dev);
-	entry = data->entry;
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	reg_00.raw = io_apic_read(dev->id, 0);
-	if (reg_00.bits.ID != mp_ioapics[dev->id].mpc_apicid) {
-		reg_00.bits.ID = mp_ioapics[dev->id].mpc_apicid;
-		io_apic_write(dev->id, 0, reg_00.raw);
-	}
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-	for (i = 0; i < nr_ioapic_registers[dev->id]; i++)
-		ioapic_write_entry(dev->id, i, entry[i]);
-
-	return 0;
-}
-
-static struct sysdev_class ioapic_sysdev_class = {
-	set_kset_name("ioapic"),
-	.suspend = ioapic_suspend,
-	.resume = ioapic_resume,
-};
-
-static int __init ioapic_init_sysfs(void)
-{
-	struct sys_device * dev;
-	int i, size, error = 0;
-
-	error = sysdev_class_register(&ioapic_sysdev_class);
-	if (error)
-		return error;
-
-	for (i = 0; i < nr_ioapics; i++ ) {
-		size = sizeof(struct sys_device) + nr_ioapic_registers[i]
-			* sizeof(struct IO_APIC_route_entry);
-		mp_ioapic_data[i] = kmalloc(size, GFP_KERNEL);
-		if (!mp_ioapic_data[i]) {
-			printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i);
-			continue;
-		}
-		memset(mp_ioapic_data[i], 0, size);
-		dev = &mp_ioapic_data[i]->dev;
-		dev->id = i;
-		dev->cls = &ioapic_sysdev_class;
-		error = sysdev_register(dev);
-		if (error) {
-			kfree(mp_ioapic_data[i]);
-			mp_ioapic_data[i] = NULL;
-			printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i);
-			continue;
-		}
-	}
-
-	return 0;
-}
-
-device_initcall(ioapic_init_sysfs);
-
-/*
- * Dynamic irq allocate and deallocation
- */
-int create_irq(void)
-{
-	/* Allocate an unused irq */
-	int irq;
-	int new;
-	unsigned long flags;
-
-	irq = -ENOSPC;
-	spin_lock_irqsave(&vector_lock, flags);
-	for (new = (NR_IRQS - 1); new >= 0; new--) {
-		if (platform_legacy_irq(new))
-			continue;
-		if (irq_cfg[new].vector != 0)
-			continue;
-		if (__assign_irq_vector(new, TARGET_CPUS) == 0)
-			irq = new;
-		break;
-	}
-	spin_unlock_irqrestore(&vector_lock, flags);
-
-	if (irq >= 0) {
-		dynamic_irq_init(irq);
-	}
-	return irq;
-}
-
-void destroy_irq(unsigned int irq)
-{
-	unsigned long flags;
-
-	dynamic_irq_cleanup(irq);
-
-	spin_lock_irqsave(&vector_lock, flags);
-	__clear_irq_vector(irq);
-	spin_unlock_irqrestore(&vector_lock, flags);
-}
-
-/*
- * MSI mesage composition
- */
-#ifdef CONFIG_PCI_MSI
-static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_msg *msg)
-{
-	struct irq_cfg *cfg = irq_cfg + irq;
-	int err;
-	unsigned dest;
-	cpumask_t tmp;
-
-	tmp = TARGET_CPUS;
-	err = assign_irq_vector(irq, tmp);
-	if (!err) {
-		cpus_and(tmp, cfg->domain, tmp);
-		dest = cpu_mask_to_apicid(tmp);
-
-		msg->address_hi = MSI_ADDR_BASE_HI;
-		msg->address_lo =
-			MSI_ADDR_BASE_LO |
-			((INT_DEST_MODE == 0) ?
-				MSI_ADDR_DEST_MODE_PHYSICAL:
-				MSI_ADDR_DEST_MODE_LOGICAL) |
-			((INT_DELIVERY_MODE != dest_LowestPrio) ?
-				MSI_ADDR_REDIRECTION_CPU:
-				MSI_ADDR_REDIRECTION_LOWPRI) |
-			MSI_ADDR_DEST_ID(dest);
-
-		msg->data =
-			MSI_DATA_TRIGGER_EDGE |
-			MSI_DATA_LEVEL_ASSERT |
-			((INT_DELIVERY_MODE != dest_LowestPrio) ?
-				MSI_DATA_DELIVERY_FIXED:
-				MSI_DATA_DELIVERY_LOWPRI) |
-			MSI_DATA_VECTOR(cfg->vector);
-	}
-	return err;
-}
-
-#ifdef CONFIG_SMP
-static void set_msi_irq_affinity(unsigned int irq, cpumask_t mask)
-{
-	struct irq_cfg *cfg = irq_cfg + irq;
-	struct msi_msg msg;
-	unsigned int dest;
-	cpumask_t tmp;
-
-	cpus_and(tmp, mask, cpu_online_map);
-	if (cpus_empty(tmp))
-		return;
-
-	if (assign_irq_vector(irq, mask))
-		return;
-
-	cpus_and(tmp, cfg->domain, mask);
-	dest = cpu_mask_to_apicid(tmp);
-
-	read_msi_msg(irq, &msg);
-
-	msg.data &= ~MSI_DATA_VECTOR_MASK;
-	msg.data |= MSI_DATA_VECTOR(cfg->vector);
-	msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK;
-	msg.address_lo |= MSI_ADDR_DEST_ID(dest);
-
-	write_msi_msg(irq, &msg);
-	irq_desc[irq].affinity = mask;
-}
-#endif /* CONFIG_SMP */
-
-/*
- * IRQ Chip for MSI PCI/PCI-X/PCI-Express Devices,
- * which implement the MSI or MSI-X Capability Structure.
- */
-static struct irq_chip msi_chip = {
-	.name		= "PCI-MSI",
-	.unmask		= unmask_msi_irq,
-	.mask		= mask_msi_irq,
-	.ack		= ack_apic_edge,
-#ifdef CONFIG_SMP
-	.set_affinity	= set_msi_irq_affinity,
-#endif
-	.retrigger	= ioapic_retrigger_irq,
-};
-
-int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
-{
-	struct msi_msg msg;
-	int irq, ret;
-	irq = create_irq();
-	if (irq < 0)
-		return irq;
-
-	ret = msi_compose_msg(dev, irq, &msg);
-	if (ret < 0) {
-		destroy_irq(irq);
-		return ret;
-	}
-
-	set_irq_msi(irq, desc);
-	write_msi_msg(irq, &msg);
-
-	set_irq_chip_and_handler_name(irq, &msi_chip, handle_edge_irq, "edge");
-
-	return 0;
-}
-
-void arch_teardown_msi_irq(unsigned int irq)
-{
-	destroy_irq(irq);
-}
-
-#endif /* CONFIG_PCI_MSI */
-
-/*
- * Hypertransport interrupt support
- */
-#ifdef CONFIG_HT_IRQ
-
-#ifdef CONFIG_SMP
-
-static void target_ht_irq(unsigned int irq, unsigned int dest, u8 vector)
-{
-	struct ht_irq_msg msg;
-	fetch_ht_irq_msg(irq, &msg);
-
-	msg.address_lo &= ~(HT_IRQ_LOW_VECTOR_MASK | HT_IRQ_LOW_DEST_ID_MASK);
-	msg.address_hi &= ~(HT_IRQ_HIGH_DEST_ID_MASK);
-
-	msg.address_lo |= HT_IRQ_LOW_VECTOR(vector) | HT_IRQ_LOW_DEST_ID(dest);
-	msg.address_hi |= HT_IRQ_HIGH_DEST_ID(dest);
-
-	write_ht_irq_msg(irq, &msg);
-}
-
-static void set_ht_irq_affinity(unsigned int irq, cpumask_t mask)
-{
-	struct irq_cfg *cfg = irq_cfg + irq;
-	unsigned int dest;
-	cpumask_t tmp;
-
-	cpus_and(tmp, mask, cpu_online_map);
-	if (cpus_empty(tmp))
-		return;
-
-	if (assign_irq_vector(irq, mask))
-		return;
-
-	cpus_and(tmp, cfg->domain, mask);
-	dest = cpu_mask_to_apicid(tmp);
-
-	target_ht_irq(irq, dest, cfg->vector);
-	irq_desc[irq].affinity = mask;
-}
-#endif
-
-static struct irq_chip ht_irq_chip = {
-	.name		= "PCI-HT",
-	.mask		= mask_ht_irq,
-	.unmask		= unmask_ht_irq,
-	.ack		= ack_apic_edge,
-#ifdef CONFIG_SMP
-	.set_affinity	= set_ht_irq_affinity,
-#endif
-	.retrigger	= ioapic_retrigger_irq,
-};
-
-int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev)
-{
-	struct irq_cfg *cfg = irq_cfg + irq;
-	int err;
-	cpumask_t tmp;
-
-	tmp = TARGET_CPUS;
-	err = assign_irq_vector(irq, tmp);
-	if (!err) {
-		struct ht_irq_msg msg;
-		unsigned dest;
-
-		cpus_and(tmp, cfg->domain, tmp);
-		dest = cpu_mask_to_apicid(tmp);
-
-		msg.address_hi = HT_IRQ_HIGH_DEST_ID(dest);
-
-		msg.address_lo =
-			HT_IRQ_LOW_BASE |
-			HT_IRQ_LOW_DEST_ID(dest) |
-			HT_IRQ_LOW_VECTOR(cfg->vector) |
-			((INT_DEST_MODE == 0) ?
-				HT_IRQ_LOW_DM_PHYSICAL :
-				HT_IRQ_LOW_DM_LOGICAL) |
-			HT_IRQ_LOW_RQEOI_EDGE |
-			((INT_DELIVERY_MODE != dest_LowestPrio) ?
-				HT_IRQ_LOW_MT_FIXED :
-				HT_IRQ_LOW_MT_ARBITRATED) |
-			HT_IRQ_LOW_IRQ_MASKED;
-
-		write_ht_irq_msg(irq, &msg);
-
-		set_irq_chip_and_handler_name(irq, &ht_irq_chip,
-					      handle_edge_irq, "edge");
-	}
-	return err;
-}
-#endif /* CONFIG_HT_IRQ */
-
-/* --------------------------------------------------------------------------
-                          ACPI-based IOAPIC Configuration
-   -------------------------------------------------------------------------- */
-
-#ifdef CONFIG_ACPI
-
-#define IO_APIC_MAX_ID		0xFE
-
-int __init io_apic_get_redir_entries (int ioapic)
-{
-	union IO_APIC_reg_01	reg_01;
-	unsigned long flags;
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	reg_01.raw = io_apic_read(ioapic, 1);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-
-	return reg_01.bits.entries;
-}
-
-
-int io_apic_set_pci_routing (int ioapic, int pin, int irq, int triggering, int polarity)
-{
-	if (!IO_APIC_IRQ(irq)) {
-		apic_printk(APIC_QUIET,KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n",
-			ioapic);
-		return -EINVAL;
-	}
-
-	/*
-	 * IRQs < 16 are already in the irq_2_pin[] map
-	 */
-	if (irq >= 16)
-		add_pin_to_irq(irq, ioapic, pin);
-
-	setup_IO_APIC_irq(ioapic, pin, irq, triggering, polarity);
-
-	return 0;
-}
-
-#endif /* CONFIG_ACPI */
-
-
-/*
- * This function currently is only a helper for the i386 smp boot process where
- * we need to reprogram the ioredtbls to cater for the cpus which have come online
- * so mask in all cases should simply be TARGET_CPUS
- */
-#ifdef CONFIG_SMP
-void __init setup_ioapic_dest(void)
-{
-	int pin, ioapic, irq, irq_entry;
-
-	if (skip_ioapic_setup == 1)
-		return;
-
-	for (ioapic = 0; ioapic < nr_ioapics; ioapic++) {
-		for (pin = 0; pin < nr_ioapic_registers[ioapic]; pin++) {
-			irq_entry = find_irq_entry(ioapic, pin, mp_INT);
-			if (irq_entry == -1)
-				continue;
-			irq = pin_2_irq(irq_entry, ioapic, pin);
-
-			/* setup_IO_APIC_irqs could fail to get vector for some device
-			 * when you have too many devices, because at that time only boot
-			 * cpu is online.
-			 */
-			if (!irq_cfg[irq].vector)
-				setup_IO_APIC_irq(ioapic, pin, irq,
-						  irq_trigger(irq_entry),
-						  irq_polarity(irq_entry));
-			else
-				set_ioapic_affinity_irq(irq, TARGET_CPUS);
-		}
-
-	}
-}
-#endif
diff --git a/arch/x86_64/kernel/ioport_64.c b/arch/x86_64/kernel/ioport_64.c
deleted file mode 100644
index 653efa3..0000000
--- a/arch/x86_64/kernel/ioport_64.c
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- *	linux/arch/x86_64/kernel/ioport.c
- *
- * This contains the io-permission bitmap code - written by obz, with changes
- * by Linus.
- */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/capability.h>
-#include <linux/errno.h>
-#include <linux/types.h>
-#include <linux/ioport.h>
-#include <linux/smp.h>
-#include <linux/stddef.h>
-#include <linux/slab.h>
-#include <linux/thread_info.h>
-#include <linux/syscalls.h>
-
-/* Set EXTENT bits starting at BASE in BITMAP to value TURN_ON. */
-static void set_bitmap(unsigned long *bitmap, unsigned int base, unsigned int extent, int new_value)
-{
-	int i;
-		if (new_value)
-		for (i = base; i < base + extent; i++) 
-			__set_bit(i, bitmap); 
-		else
-		for (i = base; i < base + extent; i++) 
-			clear_bit(i, bitmap); 
-}
-
-/*
- * this changes the io permissions bitmap in the current task.
- */
-asmlinkage long sys_ioperm(unsigned long from, unsigned long num, int turn_on)
-{
-	unsigned int i, max_long, bytes, bytes_updated;
-	struct thread_struct * t = &current->thread;
-	struct tss_struct * tss;
-	unsigned long *bitmap;
-
-	if ((from + num <= from) || (from + num > IO_BITMAP_BITS))
-		return -EINVAL;
-	if (turn_on && !capable(CAP_SYS_RAWIO))
-		return -EPERM;
-
-	/*
-	 * If it's the first ioperm() call in this thread's lifetime, set the
-	 * IO bitmap up. ioperm() is much less timing critical than clone(),
-	 * this is why we delay this operation until now:
-	 */
-	if (!t->io_bitmap_ptr) {
-		bitmap = kmalloc(IO_BITMAP_BYTES, GFP_KERNEL);
-		if (!bitmap)
-			return -ENOMEM;
-
-		memset(bitmap, 0xff, IO_BITMAP_BYTES);
-		t->io_bitmap_ptr = bitmap;
-		set_thread_flag(TIF_IO_BITMAP);
-	}
-
-	/*
-	 * do it in the per-thread copy and in the TSS ...
-	 *
-	 * Disable preemption via get_cpu() - we must not switch away
-	 * because the ->io_bitmap_max value must match the bitmap
-	 * contents:
-	 */
-	tss = &per_cpu(init_tss, get_cpu());
-
-	set_bitmap(t->io_bitmap_ptr, from, num, !turn_on);
-
-	/*
-	 * Search for a (possibly new) maximum. This is simple and stupid,
-	 * to keep it obviously correct:
-	 */
-	max_long = 0;
-	for (i = 0; i < IO_BITMAP_LONGS; i++)
-		if (t->io_bitmap_ptr[i] != ~0UL)
-			max_long = i;
-
-	bytes = (max_long + 1) * sizeof(long);
-	bytes_updated = max(bytes, t->io_bitmap_max);
-
-	t->io_bitmap_max = bytes;
-
-	/* Update the TSS: */
-	memcpy(tss->io_bitmap, t->io_bitmap_ptr, bytes_updated);
-
-	put_cpu();
-
-	return 0;
-}
-
-/*
- * sys_iopl has to be used when you want to access the IO ports
- * beyond the 0x3ff range: to get the full 65536 ports bitmapped
- * you'd need 8kB of bitmaps/process, which is a bit excessive.
- *
- * Here we just change the eflags value on the stack: we allow
- * only the super-user to do it. This depends on the stack-layout
- * on system-call entry - see also fork() and the signal handling
- * code.
- */
-
-asmlinkage long sys_iopl(unsigned int level, struct pt_regs *regs)
-{
-	unsigned int old = (regs->eflags >> 12) & 3;
-
-	if (level > 3)
-		return -EINVAL;
-	/* Trying to gain more privileges? */
-	if (level > old) {
-		if (!capable(CAP_SYS_RAWIO))
-			return -EPERM;
-	}
-	regs->eflags = (regs->eflags &~ X86_EFLAGS_IOPL) | (level << 12);
-	return 0;
-}
diff --git a/arch/x86_64/kernel/irq_64.c b/arch/x86_64/kernel/irq_64.c
deleted file mode 100644
index 39cb3fa..0000000
--- a/arch/x86_64/kernel/irq_64.c
+++ /dev/null
@@ -1,213 +0,0 @@
-/*
- *	linux/arch/x86_64/kernel/irq.c
- *
- *	Copyright (C) 1992, 1998 Linus Torvalds, Ingo Molnar
- *
- * This file contains the lowest level x86_64-specific interrupt
- * entry and irq statistics code. All the remaining irq logic is
- * done by the generic kernel/irq/ code and in the
- * x86_64-specific irq controller code. (e.g. i8259.c and
- * io_apic.c.)
- */
-
-#include <linux/kernel_stat.h>
-#include <linux/interrupt.h>
-#include <linux/seq_file.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <asm/uaccess.h>
-#include <asm/io_apic.h>
-#include <asm/idle.h>
-#include <asm/smp.h>
-
-atomic_t irq_err_count;
-
-#ifdef CONFIG_DEBUG_STACKOVERFLOW
-/*
- * Probabilistic stack overflow check:
- *
- * Only check the stack in process context, because everything else
- * runs on the big interrupt stacks. Checking reliably is too expensive,
- * so we just check from interrupts.
- */
-static inline void stack_overflow_check(struct pt_regs *regs)
-{
-	u64 curbase = (u64)task_stack_page(current);
-	static unsigned long warned = -60*HZ;
-
-	if (regs->rsp >= curbase && regs->rsp <= curbase + THREAD_SIZE &&
-	    regs->rsp <  curbase + sizeof(struct thread_info) + 128 &&
-	    time_after(jiffies, warned + 60*HZ)) {
-		printk("do_IRQ: %s near stack overflow (cur:%Lx,rsp:%lx)\n",
-		       current->comm, curbase, regs->rsp);
-		show_stack(NULL,NULL);
-		warned = jiffies;
-	}
-}
-#endif
-
-/*
- * Generic, controller-independent functions:
- */
-
-int show_interrupts(struct seq_file *p, void *v)
-{
-	int i = *(loff_t *) v, j;
-	struct irqaction * action;
-	unsigned long flags;
-
-	if (i == 0) {
-		seq_printf(p, "           ");
-		for_each_online_cpu(j)
-			seq_printf(p, "CPU%-8d",j);
-		seq_putc(p, '\n');
-	}
-
-	if (i < NR_IRQS) {
-		spin_lock_irqsave(&irq_desc[i].lock, flags);
-		action = irq_desc[i].action;
-		if (!action) 
-			goto skip;
-		seq_printf(p, "%3d: ",i);
-#ifndef CONFIG_SMP
-		seq_printf(p, "%10u ", kstat_irqs(i));
-#else
-		for_each_online_cpu(j)
-			seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
-#endif
-		seq_printf(p, " %8s", irq_desc[i].chip->name);
-		seq_printf(p, "-%-8s", irq_desc[i].name);
-
-		seq_printf(p, "  %s", action->name);
-		for (action=action->next; action; action = action->next)
-			seq_printf(p, ", %s", action->name);
-		seq_putc(p, '\n');
-skip:
-		spin_unlock_irqrestore(&irq_desc[i].lock, flags);
-	} else if (i == NR_IRQS) {
-		seq_printf(p, "NMI: ");
-		for_each_online_cpu(j)
-			seq_printf(p, "%10u ", cpu_pda(j)->__nmi_count);
-		seq_putc(p, '\n');
-		seq_printf(p, "LOC: ");
-		for_each_online_cpu(j)
-			seq_printf(p, "%10u ", cpu_pda(j)->apic_timer_irqs);
-		seq_putc(p, '\n');
-		seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count));
-	}
-	return 0;
-}
-
-/*
- * do_IRQ handles all normal device IRQ's (the special
- * SMP cross-CPU interrupts have their own specific
- * handlers).
- */
-asmlinkage unsigned int do_IRQ(struct pt_regs *regs)
-{
-	struct pt_regs *old_regs = set_irq_regs(regs);
-
-	/* high bit used in ret_from_ code  */
-	unsigned vector = ~regs->orig_rax;
-	unsigned irq;
-
-	exit_idle();
-	irq_enter();
-	irq = __get_cpu_var(vector_irq)[vector];
-
-#ifdef CONFIG_DEBUG_STACKOVERFLOW
-	stack_overflow_check(regs);
-#endif
-
-	if (likely(irq < NR_IRQS))
-		generic_handle_irq(irq);
-	else {
-		if (!disable_apic)
-			ack_APIC_irq();
-
-		if (printk_ratelimit())
-			printk(KERN_EMERG "%s: %d.%d No irq handler for vector\n",
-				__func__, smp_processor_id(), vector);
-	}
-
-	irq_exit();
-
-	set_irq_regs(old_regs);
-	return 1;
-}
-
-#ifdef CONFIG_HOTPLUG_CPU
-void fixup_irqs(cpumask_t map)
-{
-	unsigned int irq;
-	static int warned;
-
-	for (irq = 0; irq < NR_IRQS; irq++) {
-		cpumask_t mask;
-		int break_affinity = 0;
-		int set_affinity = 1;
-
-		if (irq == 2)
-			continue;
-
-		/* interrupt's are disabled at this point */
-		spin_lock(&irq_desc[irq].lock);
-
-		if (!irq_has_action(irq) ||
-		    cpus_equal(irq_desc[irq].affinity, map)) {
-			spin_unlock(&irq_desc[irq].lock);
-			continue;
-		}
-
-		cpus_and(mask, irq_desc[irq].affinity, map);
-		if (cpus_empty(mask)) {
-			break_affinity = 1;
-			mask = map;
-		}
-
-		if (irq_desc[irq].chip->mask)
-			irq_desc[irq].chip->mask(irq);
-
-		if (irq_desc[irq].chip->set_affinity)
-			irq_desc[irq].chip->set_affinity(irq, mask);
-		else if (!(warned++))
-			set_affinity = 0;
-
-		if (irq_desc[irq].chip->unmask)
-			irq_desc[irq].chip->unmask(irq);
-
-		spin_unlock(&irq_desc[irq].lock);
-
-		if (break_affinity && set_affinity)
-			printk("Broke affinity for irq %i\n", irq);
-		else if (!set_affinity)
-			printk("Cannot set affinity for irq %i\n", irq);
-	}
-
-	/* That doesn't seem sufficient.  Give it 1ms. */
-	local_irq_enable();
-	mdelay(1);
-	local_irq_disable();
-}
-#endif
-
-extern void call_softirq(void);
-
-asmlinkage void do_softirq(void)
-{
- 	__u32 pending;
- 	unsigned long flags;
-
- 	if (in_interrupt())
- 		return;
-
- 	local_irq_save(flags);
- 	pending = local_softirq_pending();
- 	/* Switch to interrupt stack */
- 	if (pending) {
-		call_softirq();
-		WARN_ON_ONCE(softirq_count());
-	}
- 	local_irq_restore(flags);
-}
-EXPORT_SYMBOL(do_softirq);
diff --git a/arch/x86_64/kernel/k8.c b/arch/x86_64/kernel/k8.c
deleted file mode 100644
index 7377ccb..0000000
--- a/arch/x86_64/kernel/k8.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * Shared support code for AMD K8 northbridges and derivates.
- * Copyright 2006 Andi Kleen, SUSE Labs. Subject to GPLv2.
- */
-#include <linux/gfp.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <asm/k8.h>
-
-int num_k8_northbridges;
-EXPORT_SYMBOL(num_k8_northbridges);
-
-static u32 *flush_words;
-
-struct pci_device_id k8_nb_ids[] = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x1103) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x1203) },
-	{}
-};
-EXPORT_SYMBOL(k8_nb_ids);
-
-struct pci_dev **k8_northbridges;
-EXPORT_SYMBOL(k8_northbridges);
-
-static struct pci_dev *next_k8_northbridge(struct pci_dev *dev)
-{
-	do {
-		dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev);
-		if (!dev)
-			break;
-	} while (!pci_match_id(&k8_nb_ids[0], dev));
-	return dev;
-}
-
-int cache_k8_northbridges(void)
-{
-	int i;
-	struct pci_dev *dev;
-
-	if (num_k8_northbridges)
-		return 0;
-
-	dev = NULL;
-	while ((dev = next_k8_northbridge(dev)) != NULL)
-		num_k8_northbridges++;
-
-	k8_northbridges = kmalloc((num_k8_northbridges + 1) * sizeof(void *),
-				  GFP_KERNEL);
-	if (!k8_northbridges)
-		return -ENOMEM;
-
-	if (!num_k8_northbridges) {
-		k8_northbridges[0] = NULL;
-		return 0;
-	}
-
-	flush_words = kmalloc(num_k8_northbridges * sizeof(u32), GFP_KERNEL);
-	if (!flush_words) {
-		kfree(k8_northbridges);
-		return -ENOMEM;
-	}
-
-	dev = NULL;
-	i = 0;
-	while ((dev = next_k8_northbridge(dev)) != NULL) {
-		k8_northbridges[i] = dev;
-		pci_read_config_dword(dev, 0x9c, &flush_words[i++]);
-	}
-	k8_northbridges[i] = NULL;
-	return 0;
-}
-EXPORT_SYMBOL_GPL(cache_k8_northbridges);
-
-/* Ignores subdevice/subvendor but as far as I can figure out
-   they're useless anyways */
-int __init early_is_k8_nb(u32 device)
-{
-	struct pci_device_id *id;
-	u32 vendor = device & 0xffff;
-	device >>= 16;
-	for (id = k8_nb_ids; id->vendor; id++)
-		if (vendor == id->vendor && device == id->device)
-			return 1;
-	return 0;
-}
-
-void k8_flush_garts(void)
-{
-	int flushed, i;
-	unsigned long flags;
-	static DEFINE_SPINLOCK(gart_lock);
-
-	/* Avoid races between AGP and IOMMU. In theory it's not needed
-	   but I'm not sure if the hardware won't lose flush requests
-	   when another is pending. This whole thing is so expensive anyways
-	   that it doesn't matter to serialize more. -AK */
-	spin_lock_irqsave(&gart_lock, flags);
-	flushed = 0;
-	for (i = 0; i < num_k8_northbridges; i++) {
-		pci_write_config_dword(k8_northbridges[i], 0x9c,
-				       flush_words[i]|1);
-		flushed++;
-	}
-	for (i = 0; i < num_k8_northbridges; i++) {
-		u32 w;
-		/* Make sure the hardware actually executed the flush*/
-		for (;;) {
-			pci_read_config_dword(k8_northbridges[i],
-					      0x9c, &w);
-			if (!(w & 1))
-				break;
-			cpu_relax();
-		}
-	}
-	spin_unlock_irqrestore(&gart_lock, flags);
-	if (!flushed)
-		printk("nothing to flush?\n");
-}
-EXPORT_SYMBOL_GPL(k8_flush_garts);
-
diff --git a/arch/x86_64/kernel/kprobes_64.c b/arch/x86_64/kernel/kprobes_64.c
deleted file mode 100644
index a30e004..0000000
--- a/arch/x86_64/kernel/kprobes_64.c
+++ /dev/null
@@ -1,749 +0,0 @@
-/*
- *  Kernel Probes (KProbes)
- *  arch/x86_64/kernel/kprobes.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) IBM Corporation, 2002, 2004
- *
- * 2002-Oct	Created by Vamsi Krishna S <vamsi_krishna@in.ibm.com> Kernel
- *		Probes initial implementation ( includes contributions from
- *		Rusty Russell).
- * 2004-July	Suparna Bhattacharya <suparna@in.ibm.com> added jumper probes
- *		interface to access function arguments.
- * 2004-Oct	Jim Keniston <kenistoj@us.ibm.com> and Prasanna S Panchamukhi
- *		<prasanna@in.ibm.com> adapted for x86_64
- * 2005-Mar	Roland McGrath <roland@redhat.com>
- *		Fixed to handle %rip-relative addressing mode correctly.
- * 2005-May     Rusty Lynch <rusty.lynch@intel.com>
- *              Added function return probes functionality
- */
-
-#include <linux/kprobes.h>
-#include <linux/ptrace.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/preempt.h>
-#include <linux/module.h>
-#include <linux/kdebug.h>
-
-#include <asm/pgtable.h>
-#include <asm/uaccess.h>
-#include <asm/alternative.h>
-
-void jprobe_return_end(void);
-static void __kprobes arch_copy_kprobe(struct kprobe *p);
-
-DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL;
-DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
-
-/*
- * returns non-zero if opcode modifies the interrupt flag.
- */
-static __always_inline int is_IF_modifier(kprobe_opcode_t *insn)
-{
-	switch (*insn) {
-	case 0xfa:		/* cli */
-	case 0xfb:		/* sti */
-	case 0xcf:		/* iret/iretd */
-	case 0x9d:		/* popf/popfd */
-		return 1;
-	}
-
-	if (*insn  >= 0x40 && *insn <= 0x4f && *++insn == 0xcf)
-		return 1;
-	return 0;
-}
-
-int __kprobes arch_prepare_kprobe(struct kprobe *p)
-{
-	/* insn: must be on special executable page on x86_64. */
-	p->ainsn.insn = get_insn_slot();
-	if (!p->ainsn.insn) {
-		return -ENOMEM;
-	}
-	arch_copy_kprobe(p);
-	return 0;
-}
-
-/*
- * Determine if the instruction uses the %rip-relative addressing mode.
- * If it does, return the address of the 32-bit displacement word.
- * If not, return null.
- */
-static s32 __kprobes *is_riprel(u8 *insn)
-{
-#define W(row,b0,b1,b2,b3,b4,b5,b6,b7,b8,b9,ba,bb,bc,bd,be,bf)		      \
-	(((b0##UL << 0x0)|(b1##UL << 0x1)|(b2##UL << 0x2)|(b3##UL << 0x3) |   \
-	  (b4##UL << 0x4)|(b5##UL << 0x5)|(b6##UL << 0x6)|(b7##UL << 0x7) |   \
-	  (b8##UL << 0x8)|(b9##UL << 0x9)|(ba##UL << 0xa)|(bb##UL << 0xb) |   \
-	  (bc##UL << 0xc)|(bd##UL << 0xd)|(be##UL << 0xe)|(bf##UL << 0xf))    \
-	 << (row % 64))
-	static const u64 onebyte_has_modrm[256 / 64] = {
-		/*      0 1 2 3 4 5 6 7 8 9 a b c d e f         */
-		/*      -------------------------------         */
-		W(0x00, 1,1,1,1,0,0,0,0,1,1,1,1,0,0,0,0)| /* 00 */
-		W(0x10, 1,1,1,1,0,0,0,0,1,1,1,1,0,0,0,0)| /* 10 */
-		W(0x20, 1,1,1,1,0,0,0,0,1,1,1,1,0,0,0,0)| /* 20 */
-		W(0x30, 1,1,1,1,0,0,0,0,1,1,1,1,0,0,0,0), /* 30 */
-		W(0x40, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0)| /* 40 */
-		W(0x50, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0)| /* 50 */
-		W(0x60, 0,0,1,1,0,0,0,0,0,1,0,1,0,0,0,0)| /* 60 */
-		W(0x70, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0), /* 70 */
-		W(0x80, 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1)| /* 80 */
-		W(0x90, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0)| /* 90 */
-		W(0xa0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0)| /* a0 */
-		W(0xb0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0), /* b0 */
-		W(0xc0, 1,1,0,0,1,1,1,1,0,0,0,0,0,0,0,0)| /* c0 */
-		W(0xd0, 1,1,1,1,0,0,0,0,1,1,1,1,1,1,1,1)| /* d0 */
-		W(0xe0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0)| /* e0 */
-		W(0xf0, 0,0,0,0,0,0,1,1,0,0,0,0,0,0,1,1)  /* f0 */
-		/*      -------------------------------         */
-		/*      0 1 2 3 4 5 6 7 8 9 a b c d e f         */
-	};
-	static const u64 twobyte_has_modrm[256 / 64] = {
-		/*      0 1 2 3 4 5 6 7 8 9 a b c d e f         */
-		/*      -------------------------------         */
-		W(0x00, 1,1,1,1,0,0,0,0,0,0,0,0,0,1,0,1)| /* 0f */
-		W(0x10, 1,1,1,1,1,1,1,1,1,0,0,0,0,0,0,0)| /* 1f */
-		W(0x20, 1,1,1,1,1,0,1,0,1,1,1,1,1,1,1,1)| /* 2f */
-		W(0x30, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0), /* 3f */
-		W(0x40, 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1)| /* 4f */
-		W(0x50, 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1)| /* 5f */
-		W(0x60, 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1)| /* 6f */
-		W(0x70, 1,1,1,1,1,1,1,0,0,0,0,0,1,1,1,1), /* 7f */
-		W(0x80, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0)| /* 8f */
-		W(0x90, 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1)| /* 9f */
-		W(0xa0, 0,0,0,1,1,1,1,1,0,0,0,1,1,1,1,1)| /* af */
-		W(0xb0, 1,1,1,1,1,1,1,1,0,0,1,1,1,1,1,1), /* bf */
-		W(0xc0, 1,1,1,1,1,1,1,1,0,0,0,0,0,0,0,0)| /* cf */
-		W(0xd0, 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1)| /* df */
-		W(0xe0, 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1)| /* ef */
-		W(0xf0, 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,0)  /* ff */
-		/*      -------------------------------         */
-		/*      0 1 2 3 4 5 6 7 8 9 a b c d e f         */
-	};
-#undef	W
-	int need_modrm;
-
-	/* Skip legacy instruction prefixes.  */
-	while (1) {
-		switch (*insn) {
-		case 0x66:
-		case 0x67:
-		case 0x2e:
-		case 0x3e:
-		case 0x26:
-		case 0x64:
-		case 0x65:
-		case 0x36:
-		case 0xf0:
-		case 0xf3:
-		case 0xf2:
-			++insn;
-			continue;
-		}
-		break;
-	}
-
-	/* Skip REX instruction prefix.  */
-	if ((*insn & 0xf0) == 0x40)
-		++insn;
-
-	if (*insn == 0x0f) {	/* Two-byte opcode.  */
-		++insn;
-		need_modrm = test_bit(*insn, twobyte_has_modrm);
-	} else {		/* One-byte opcode.  */
-		need_modrm = test_bit(*insn, onebyte_has_modrm);
-	}
-
-	if (need_modrm) {
-		u8 modrm = *++insn;
-		if ((modrm & 0xc7) == 0x05) { /* %rip+disp32 addressing mode */
-			/* Displacement follows ModRM byte.  */
-			return (s32 *) ++insn;
-		}
-	}
-
-	/* No %rip-relative addressing mode here.  */
-	return NULL;
-}
-
-static void __kprobes arch_copy_kprobe(struct kprobe *p)
-{
-	s32 *ripdisp;
-	memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE);
-	ripdisp = is_riprel(p->ainsn.insn);
-	if (ripdisp) {
-		/*
-		 * The copied instruction uses the %rip-relative
-		 * addressing mode.  Adjust the displacement for the
-		 * difference between the original location of this
-		 * instruction and the location of the copy that will
-		 * actually be run.  The tricky bit here is making sure
-		 * that the sign extension happens correctly in this
-		 * calculation, since we need a signed 32-bit result to
-		 * be sign-extended to 64 bits when it's added to the
-		 * %rip value and yield the same 64-bit result that the
-		 * sign-extension of the original signed 32-bit
-		 * displacement would have given.
-		 */
-		s64 disp = (u8 *) p->addr + *ripdisp - (u8 *) p->ainsn.insn;
-		BUG_ON((s64) (s32) disp != disp); /* Sanity check.  */
-		*ripdisp = disp;
-	}
-	p->opcode = *p->addr;
-}
-
-void __kprobes arch_arm_kprobe(struct kprobe *p)
-{
-	text_poke(p->addr, ((unsigned char []){BREAKPOINT_INSTRUCTION}), 1);
-}
-
-void __kprobes arch_disarm_kprobe(struct kprobe *p)
-{
-	text_poke(p->addr, &p->opcode, 1);
-}
-
-void __kprobes arch_remove_kprobe(struct kprobe *p)
-{
-	mutex_lock(&kprobe_mutex);
-	free_insn_slot(p->ainsn.insn, 0);
-	mutex_unlock(&kprobe_mutex);
-}
-
-static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb)
-{
-	kcb->prev_kprobe.kp = kprobe_running();
-	kcb->prev_kprobe.status = kcb->kprobe_status;
-	kcb->prev_kprobe.old_rflags = kcb->kprobe_old_rflags;
-	kcb->prev_kprobe.saved_rflags = kcb->kprobe_saved_rflags;
-}
-
-static void __kprobes restore_previous_kprobe(struct kprobe_ctlblk *kcb)
-{
-	__get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp;
-	kcb->kprobe_status = kcb->prev_kprobe.status;
-	kcb->kprobe_old_rflags = kcb->prev_kprobe.old_rflags;
-	kcb->kprobe_saved_rflags = kcb->prev_kprobe.saved_rflags;
-}
-
-static void __kprobes set_current_kprobe(struct kprobe *p, struct pt_regs *regs,
-				struct kprobe_ctlblk *kcb)
-{
-	__get_cpu_var(current_kprobe) = p;
-	kcb->kprobe_saved_rflags = kcb->kprobe_old_rflags
-		= (regs->eflags & (TF_MASK | IF_MASK));
-	if (is_IF_modifier(p->ainsn.insn))
-		kcb->kprobe_saved_rflags &= ~IF_MASK;
-}
-
-static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
-{
-	regs->eflags |= TF_MASK;
-	regs->eflags &= ~IF_MASK;
-	/*single step inline if the instruction is an int3*/
-	if (p->opcode == BREAKPOINT_INSTRUCTION)
-		regs->rip = (unsigned long)p->addr;
-	else
-		regs->rip = (unsigned long)p->ainsn.insn;
-}
-
-/* Called with kretprobe_lock held */
-void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
-				      struct pt_regs *regs)
-{
-	unsigned long *sara = (unsigned long *)regs->rsp;
-
-	ri->ret_addr = (kprobe_opcode_t *) *sara;
-	/* Replace the return addr with trampoline addr */
-	*sara = (unsigned long) &kretprobe_trampoline;
-}
-
-int __kprobes kprobe_handler(struct pt_regs *regs)
-{
-	struct kprobe *p;
-	int ret = 0;
-	kprobe_opcode_t *addr = (kprobe_opcode_t *)(regs->rip - sizeof(kprobe_opcode_t));
-	struct kprobe_ctlblk *kcb;
-
-	/*
-	 * We don't want to be preempted for the entire
-	 * duration of kprobe processing
-	 */
-	preempt_disable();
-	kcb = get_kprobe_ctlblk();
-
-	/* Check we're not actually recursing */
-	if (kprobe_running()) {
-		p = get_kprobe(addr);
-		if (p) {
-			if (kcb->kprobe_status == KPROBE_HIT_SS &&
-				*p->ainsn.insn == BREAKPOINT_INSTRUCTION) {
-				regs->eflags &= ~TF_MASK;
-				regs->eflags |= kcb->kprobe_saved_rflags;
-				goto no_kprobe;
-			} else if (kcb->kprobe_status == KPROBE_HIT_SSDONE) {
-				/* TODO: Provide re-entrancy from
-				 * post_kprobes_handler() and avoid exception
-				 * stack corruption while single-stepping on
-				 * the instruction of the new probe.
-				 */
-				arch_disarm_kprobe(p);
-				regs->rip = (unsigned long)p->addr;
-				reset_current_kprobe();
-				ret = 1;
-			} else {
-				/* We have reentered the kprobe_handler(), since
-				 * another probe was hit while within the
-				 * handler. We here save the original kprobe
-				 * variables and just single step on instruction
-				 * of the new probe without calling any user
-				 * handlers.
-				 */
-				save_previous_kprobe(kcb);
-				set_current_kprobe(p, regs, kcb);
-				kprobes_inc_nmissed_count(p);
-				prepare_singlestep(p, regs);
-				kcb->kprobe_status = KPROBE_REENTER;
-				return 1;
-			}
-		} else {
-			if (*addr != BREAKPOINT_INSTRUCTION) {
-			/* The breakpoint instruction was removed by
-			 * another cpu right after we hit, no further
-			 * handling of this interrupt is appropriate
-			 */
-				regs->rip = (unsigned long)addr;
-				ret = 1;
-				goto no_kprobe;
-			}
-			p = __get_cpu_var(current_kprobe);
-			if (p->break_handler && p->break_handler(p, regs)) {
-				goto ss_probe;
-			}
-		}
-		goto no_kprobe;
-	}
-
-	p = get_kprobe(addr);
-	if (!p) {
-		if (*addr != BREAKPOINT_INSTRUCTION) {
-			/*
-			 * The breakpoint instruction was removed right
-			 * after we hit it.  Another cpu has removed
-			 * either a probepoint or a debugger breakpoint
-			 * at this address.  In either case, no further
-			 * handling of this interrupt is appropriate.
-			 * Back up over the (now missing) int3 and run
-			 * the original instruction.
-			 */
-			regs->rip = (unsigned long)addr;
-			ret = 1;
-		}
-		/* Not one of ours: let kernel handle it */
-		goto no_kprobe;
-	}
-
-	set_current_kprobe(p, regs, kcb);
-	kcb->kprobe_status = KPROBE_HIT_ACTIVE;
-
-	if (p->pre_handler && p->pre_handler(p, regs))
-		/* handler has already set things up, so skip ss setup */
-		return 1;
-
-ss_probe:
-	prepare_singlestep(p, regs);
-	kcb->kprobe_status = KPROBE_HIT_SS;
-	return 1;
-
-no_kprobe:
-	preempt_enable_no_resched();
-	return ret;
-}
-
-/*
- * For function-return probes, init_kprobes() establishes a probepoint
- * here. When a retprobed function returns, this probe is hit and
- * trampoline_probe_handler() runs, calling the kretprobe's handler.
- */
- void kretprobe_trampoline_holder(void)
- {
- 	asm volatile (  ".global kretprobe_trampoline\n"
- 			"kretprobe_trampoline: \n"
- 			"nop\n");
- }
-
-/*
- * Called when we hit the probe point at kretprobe_trampoline
- */
-int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
-{
-	struct kretprobe_instance *ri = NULL;
-	struct hlist_head *head, empty_rp;
-	struct hlist_node *node, *tmp;
-	unsigned long flags, orig_ret_address = 0;
-	unsigned long trampoline_address =(unsigned long)&kretprobe_trampoline;
-
-	INIT_HLIST_HEAD(&empty_rp);
-	spin_lock_irqsave(&kretprobe_lock, flags);
-	head = kretprobe_inst_table_head(current);
-
-	/*
-	 * It is possible to have multiple instances associated with a given
-	 * task either because an multiple functions in the call path
-	 * have a return probe installed on them, and/or more then one return
-	 * return probe was registered for a target function.
-	 *
-	 * We can handle this because:
-	 *     - instances are always inserted at the head of the list
-	 *     - when multiple return probes are registered for the same
-	 *       function, the first instance's ret_addr will point to the
-	 *       real return address, and all the rest will point to
-	 *       kretprobe_trampoline
-	 */
-	hlist_for_each_entry_safe(ri, node, tmp, head, hlist) {
-		if (ri->task != current)
-			/* another task is sharing our hash bucket */
-			continue;
-
-		if (ri->rp && ri->rp->handler)
-			ri->rp->handler(ri, regs);
-
-		orig_ret_address = (unsigned long)ri->ret_addr;
-		recycle_rp_inst(ri, &empty_rp);
-
-		if (orig_ret_address != trampoline_address)
-			/*
-			 * This is the real return address. Any other
-			 * instances associated with this task are for
-			 * other calls deeper on the call stack
-			 */
-			break;
-	}
-
-	kretprobe_assert(ri, orig_ret_address, trampoline_address);
-	regs->rip = orig_ret_address;
-
-	reset_current_kprobe();
-	spin_unlock_irqrestore(&kretprobe_lock, flags);
-	preempt_enable_no_resched();
-
-	hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) {
-		hlist_del(&ri->hlist);
-		kfree(ri);
-	}
-	/*
-	 * By returning a non-zero value, we are telling
-	 * kprobe_handler() that we don't want the post_handler
-	 * to run (and have re-enabled preemption)
-	 */
-	return 1;
-}
-
-/*
- * Called after single-stepping.  p->addr is the address of the
- * instruction whose first byte has been replaced by the "int 3"
- * instruction.  To avoid the SMP problems that can occur when we
- * temporarily put back the original opcode to single-step, we
- * single-stepped a copy of the instruction.  The address of this
- * copy is p->ainsn.insn.
- *
- * This function prepares to return from the post-single-step
- * interrupt.  We have to fix up the stack as follows:
- *
- * 0) Except in the case of absolute or indirect jump or call instructions,
- * the new rip is relative to the copied instruction.  We need to make
- * it relative to the original instruction.
- *
- * 1) If the single-stepped instruction was pushfl, then the TF and IF
- * flags are set in the just-pushed eflags, and may need to be cleared.
- *
- * 2) If the single-stepped instruction was a call, the return address
- * that is atop the stack is the address following the copied instruction.
- * We need to make it the address following the original instruction.
- */
-static void __kprobes resume_execution(struct kprobe *p,
-		struct pt_regs *regs, struct kprobe_ctlblk *kcb)
-{
-	unsigned long *tos = (unsigned long *)regs->rsp;
-	unsigned long next_rip = 0;
-	unsigned long copy_rip = (unsigned long)p->ainsn.insn;
-	unsigned long orig_rip = (unsigned long)p->addr;
-	kprobe_opcode_t *insn = p->ainsn.insn;
-
-	/*skip the REX prefix*/
-	if (*insn >= 0x40 && *insn <= 0x4f)
-		insn++;
-
-	switch (*insn) {
-	case 0x9c:		/* pushfl */
-		*tos &= ~(TF_MASK | IF_MASK);
-		*tos |= kcb->kprobe_old_rflags;
-		break;
-	case 0xc3:		/* ret/lret */
-	case 0xcb:
-	case 0xc2:
-	case 0xca:
-		regs->eflags &= ~TF_MASK;
-		/* rip is already adjusted, no more changes required*/
-		return;
-	case 0xe8:		/* call relative - Fix return addr */
-		*tos = orig_rip + (*tos - copy_rip);
-		break;
-	case 0xff:
-		if ((insn[1] & 0x30) == 0x10) {
-			/* call absolute, indirect */
-			/* Fix return addr; rip is correct. */
-			next_rip = regs->rip;
-			*tos = orig_rip + (*tos - copy_rip);
-		} else if (((insn[1] & 0x31) == 0x20) ||	/* jmp near, absolute indirect */
-			   ((insn[1] & 0x31) == 0x21)) {	/* jmp far, absolute indirect */
-			/* rip is correct. */
-			next_rip = regs->rip;
-		}
-		break;
-	case 0xea:		/* jmp absolute -- rip is correct */
-		next_rip = regs->rip;
-		break;
-	default:
-		break;
-	}
-
-	regs->eflags &= ~TF_MASK;
-	if (next_rip) {
-		regs->rip = next_rip;
-	} else {
-		regs->rip = orig_rip + (regs->rip - copy_rip);
-	}
-}
-
-int __kprobes post_kprobe_handler(struct pt_regs *regs)
-{
-	struct kprobe *cur = kprobe_running();
-	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
-
-	if (!cur)
-		return 0;
-
-	if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) {
-		kcb->kprobe_status = KPROBE_HIT_SSDONE;
-		cur->post_handler(cur, regs, 0);
-	}
-
-	resume_execution(cur, regs, kcb);
-	regs->eflags |= kcb->kprobe_saved_rflags;
-
-	/* Restore the original saved kprobes variables and continue. */
-	if (kcb->kprobe_status == KPROBE_REENTER) {
-		restore_previous_kprobe(kcb);
-		goto out;
-	}
-	reset_current_kprobe();
-out:
-	preempt_enable_no_resched();
-
-	/*
-	 * if somebody else is singlestepping across a probe point, eflags
-	 * will have TF set, in which case, continue the remaining processing
-	 * of do_debug, as if this is not a probe hit.
-	 */
-	if (regs->eflags & TF_MASK)
-		return 0;
-
-	return 1;
-}
-
-int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
-{
-	struct kprobe *cur = kprobe_running();
-	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
-	const struct exception_table_entry *fixup;
-
-	switch(kcb->kprobe_status) {
-	case KPROBE_HIT_SS:
-	case KPROBE_REENTER:
-		/*
-		 * We are here because the instruction being single
-		 * stepped caused a page fault. We reset the current
-		 * kprobe and the rip points back to the probe address
-		 * and allow the page fault handler to continue as a
-		 * normal page fault.
-		 */
-		regs->rip = (unsigned long)cur->addr;
-		regs->eflags |= kcb->kprobe_old_rflags;
-		if (kcb->kprobe_status == KPROBE_REENTER)
-			restore_previous_kprobe(kcb);
-		else
-			reset_current_kprobe();
-		preempt_enable_no_resched();
-		break;
-	case KPROBE_HIT_ACTIVE:
-	case KPROBE_HIT_SSDONE:
-		/*
-		 * We increment the nmissed count for accounting,
-		 * we can also use npre/npostfault count for accouting
-		 * these specific fault cases.
-		 */
-		kprobes_inc_nmissed_count(cur);
-
-		/*
-		 * We come here because instructions in the pre/post
-		 * handler caused the page_fault, this could happen
-		 * if handler tries to access user space by
-		 * copy_from_user(), get_user() etc. Let the
-		 * user-specified handler try to fix it first.
-		 */
-		if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr))
-			return 1;
-
-		/*
-		 * In case the user-specified fault handler returned
-		 * zero, try to fix up.
-		 */
-		fixup = search_exception_tables(regs->rip);
-		if (fixup) {
-			regs->rip = fixup->fixup;
-			return 1;
-		}
-
-		/*
-		 * fixup() could not handle it,
-		 * Let do_page_fault() fix it.
-		 */
-		break;
-	default:
-		break;
-	}
-	return 0;
-}
-
-/*
- * Wrapper routine for handling exceptions.
- */
-int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
-				       unsigned long val, void *data)
-{
-	struct die_args *args = (struct die_args *)data;
-	int ret = NOTIFY_DONE;
-
-	if (args->regs && user_mode(args->regs))
-		return ret;
-
-	switch (val) {
-	case DIE_INT3:
-		if (kprobe_handler(args->regs))
-			ret = NOTIFY_STOP;
-		break;
-	case DIE_DEBUG:
-		if (post_kprobe_handler(args->regs))
-			ret = NOTIFY_STOP;
-		break;
-	case DIE_GPF:
-	case DIE_PAGE_FAULT:
-		/* kprobe_running() needs smp_processor_id() */
-		preempt_disable();
-		if (kprobe_running() &&
-		    kprobe_fault_handler(args->regs, args->trapnr))
-			ret = NOTIFY_STOP;
-		preempt_enable();
-		break;
-	default:
-		break;
-	}
-	return ret;
-}
-
-int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
-{
-	struct jprobe *jp = container_of(p, struct jprobe, kp);
-	unsigned long addr;
-	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
-
-	kcb->jprobe_saved_regs = *regs;
-	kcb->jprobe_saved_rsp = (long *) regs->rsp;
-	addr = (unsigned long)(kcb->jprobe_saved_rsp);
-	/*
-	 * As Linus pointed out, gcc assumes that the callee
-	 * owns the argument space and could overwrite it, e.g.
-	 * tailcall optimization. So, to be absolutely safe
-	 * we also save and restore enough stack bytes to cover
-	 * the argument area.
-	 */
-	memcpy(kcb->jprobes_stack, (kprobe_opcode_t *)addr,
-			MIN_STACK_SIZE(addr));
-	regs->eflags &= ~IF_MASK;
-	regs->rip = (unsigned long)(jp->entry);
-	return 1;
-}
-
-void __kprobes jprobe_return(void)
-{
-	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
-
-	asm volatile ("       xchg   %%rbx,%%rsp     \n"
-		      "       int3			\n"
-		      "       .globl jprobe_return_end	\n"
-		      "       jprobe_return_end:	\n"
-		      "       nop			\n"::"b"
-		      (kcb->jprobe_saved_rsp):"memory");
-}
-
-int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
-{
-	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
-	u8 *addr = (u8 *) (regs->rip - 1);
-	unsigned long stack_addr = (unsigned long)(kcb->jprobe_saved_rsp);
-	struct jprobe *jp = container_of(p, struct jprobe, kp);
-
-	if ((addr > (u8 *) jprobe_return) && (addr < (u8 *) jprobe_return_end)) {
-		if ((long *)regs->rsp != kcb->jprobe_saved_rsp) {
-			struct pt_regs *saved_regs =
-			    container_of(kcb->jprobe_saved_rsp,
-					    struct pt_regs, rsp);
-			printk("current rsp %p does not match saved rsp %p\n",
-			       (long *)regs->rsp, kcb->jprobe_saved_rsp);
-			printk("Saved registers for jprobe %p\n", jp);
-			show_registers(saved_regs);
-			printk("Current registers\n");
-			show_registers(regs);
-			BUG();
-		}
-		*regs = kcb->jprobe_saved_regs;
-		memcpy((kprobe_opcode_t *) stack_addr, kcb->jprobes_stack,
-		       MIN_STACK_SIZE(stack_addr));
-		preempt_enable_no_resched();
-		return 1;
-	}
-	return 0;
-}
-
-static struct kprobe trampoline_p = {
-	.addr = (kprobe_opcode_t *) &kretprobe_trampoline,
-	.pre_handler = trampoline_probe_handler
-};
-
-int __init arch_init_kprobes(void)
-{
-	return register_kprobe(&trampoline_p);
-}
-
-int __kprobes arch_trampoline_kprobe(struct kprobe *p)
-{
-	if (p->addr == (kprobe_opcode_t *)&kretprobe_trampoline)
-		return 1;
-
-	return 0;
-}
diff --git a/arch/x86_64/kernel/ldt_64.c b/arch/x86_64/kernel/ldt_64.c
deleted file mode 100644
index bc9ffd5..0000000
--- a/arch/x86_64/kernel/ldt_64.c
+++ /dev/null
@@ -1,252 +0,0 @@
-/*
- * linux/arch/x86_64/kernel/ldt.c
- *
- * Copyright (C) 1992 Krishna Balasubramanian and Linus Torvalds
- * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com>
- * Copyright (C) 2002 Andi Kleen
- * 
- * This handles calls from both 32bit and 64bit mode.
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/vmalloc.h>
-#include <linux/slab.h>
-
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <asm/ldt.h>
-#include <asm/desc.h>
-#include <asm/proto.h>
-
-#ifdef CONFIG_SMP /* avoids "defined but not used" warnig */
-static void flush_ldt(void *null)
-{
-	if (current->active_mm)
-               load_LDT(&current->active_mm->context);
-}
-#endif
-
-static int alloc_ldt(mm_context_t *pc, unsigned mincount, int reload)
-{
-	void *oldldt;
-	void *newldt;
-	unsigned oldsize;
-
-	if (mincount <= (unsigned)pc->size)
-		return 0;
-	oldsize = pc->size;
-	mincount = (mincount+511)&(~511);
-	if (mincount*LDT_ENTRY_SIZE > PAGE_SIZE)
-		newldt = vmalloc(mincount*LDT_ENTRY_SIZE);
-	else
-		newldt = kmalloc(mincount*LDT_ENTRY_SIZE, GFP_KERNEL);
-
-	if (!newldt)
-		return -ENOMEM;
-
-	if (oldsize)
-		memcpy(newldt, pc->ldt, oldsize*LDT_ENTRY_SIZE);
-	oldldt = pc->ldt;
-	memset(newldt+oldsize*LDT_ENTRY_SIZE, 0, (mincount-oldsize)*LDT_ENTRY_SIZE);
-	wmb();
-	pc->ldt = newldt;
-	wmb();
-	pc->size = mincount;
-	wmb();
-	if (reload) {
-#ifdef CONFIG_SMP
-		cpumask_t mask;
-
-		preempt_disable();
-		mask = cpumask_of_cpu(smp_processor_id());
-		load_LDT(pc);
-		if (!cpus_equal(current->mm->cpu_vm_mask, mask))
-			smp_call_function(flush_ldt, NULL, 1, 1);
-		preempt_enable();
-#else
-		load_LDT(pc);
-#endif
-	}
-	if (oldsize) {
-		if (oldsize*LDT_ENTRY_SIZE > PAGE_SIZE)
-			vfree(oldldt);
-		else
-			kfree(oldldt);
-	}
-	return 0;
-}
-
-static inline int copy_ldt(mm_context_t *new, mm_context_t *old)
-{
-	int err = alloc_ldt(new, old->size, 0);
-	if (err < 0)
-		return err;
-	memcpy(new->ldt, old->ldt, old->size*LDT_ENTRY_SIZE);
-	return 0;
-}
-
-/*
- * we do not have to muck with descriptors here, that is
- * done in switch_mm() as needed.
- */
-int init_new_context(struct task_struct *tsk, struct mm_struct *mm)
-{
-	struct mm_struct * old_mm;
-	int retval = 0;
-
-	init_MUTEX(&mm->context.sem);
-	mm->context.size = 0;
-	old_mm = current->mm;
-	if (old_mm && old_mm->context.size > 0) {
-		down(&old_mm->context.sem);
-		retval = copy_ldt(&mm->context, &old_mm->context);
-		up(&old_mm->context.sem);
-	}
-	return retval;
-}
-
-/*
- * 
- * Don't touch the LDT register - we're already in the next thread.
- */
-void destroy_context(struct mm_struct *mm)
-{
-	if (mm->context.size) {
-		if ((unsigned)mm->context.size*LDT_ENTRY_SIZE > PAGE_SIZE)
-			vfree(mm->context.ldt);
-		else
-			kfree(mm->context.ldt);
-		mm->context.size = 0;
-	}
-}
-
-static int read_ldt(void __user * ptr, unsigned long bytecount)
-{
-	int err;
-	unsigned long size;
-	struct mm_struct * mm = current->mm;
-
-	if (!mm->context.size)
-		return 0;
-	if (bytecount > LDT_ENTRY_SIZE*LDT_ENTRIES)
-		bytecount = LDT_ENTRY_SIZE*LDT_ENTRIES;
-
-	down(&mm->context.sem);
-	size = mm->context.size*LDT_ENTRY_SIZE;
-	if (size > bytecount)
-		size = bytecount;
-
-	err = 0;
-	if (copy_to_user(ptr, mm->context.ldt, size))
-		err = -EFAULT;
-	up(&mm->context.sem);
-	if (err < 0)
-		goto error_return;
-	if (size != bytecount) {
-		/* zero-fill the rest */
-		if (clear_user(ptr+size, bytecount-size) != 0) {
-			err = -EFAULT;
-			goto error_return;
-		}
-	}
-	return bytecount;
-error_return:
-	return err;
-}
-
-static int read_default_ldt(void __user * ptr, unsigned long bytecount)
-{
-	/* Arbitrary number */ 
-	/* x86-64 default LDT is all zeros */
-	if (bytecount > 128) 
-		bytecount = 128; 	
-	if (clear_user(ptr, bytecount))
-		return -EFAULT;
-	return bytecount; 
-}
-
-static int write_ldt(void __user * ptr, unsigned long bytecount, int oldmode)
-{
-	struct task_struct *me = current;
-	struct mm_struct * mm = me->mm;
-	__u32 entry_1, entry_2, *lp;
-	int error;
-	struct user_desc ldt_info;
-
-	error = -EINVAL;
-
-	if (bytecount != sizeof(ldt_info))
-		goto out;
-	error = -EFAULT; 	
-	if (copy_from_user(&ldt_info, ptr, bytecount))
-		goto out;
-
-	error = -EINVAL;
-	if (ldt_info.entry_number >= LDT_ENTRIES)
-		goto out;
-	if (ldt_info.contents == 3) {
-		if (oldmode)
-			goto out;
-		if (ldt_info.seg_not_present == 0)
-			goto out;
-	}
-
-	down(&mm->context.sem);
-	if (ldt_info.entry_number >= (unsigned)mm->context.size) {
-		error = alloc_ldt(&current->mm->context, ldt_info.entry_number+1, 1);
-		if (error < 0)
-			goto out_unlock;
-	}
-
-	lp = (__u32 *) ((ldt_info.entry_number << 3) + (char *) mm->context.ldt);
-
-   	/* Allow LDTs to be cleared by the user. */
-   	if (ldt_info.base_addr == 0 && ldt_info.limit == 0) {
-		if (oldmode || LDT_empty(&ldt_info)) {
-			entry_1 = 0;
-			entry_2 = 0;
-			goto install;
-		}
-	}
-
-	entry_1 = LDT_entry_a(&ldt_info);
-	entry_2 = LDT_entry_b(&ldt_info);
-	if (oldmode)
-		entry_2 &= ~(1 << 20);
-
-	/* Install the new entry ...  */
-install:
-	*lp	= entry_1;
-	*(lp+1)	= entry_2;
-	error = 0;
-
-out_unlock:
-	up(&mm->context.sem);
-out:
-	return error;
-}
-
-asmlinkage int sys_modify_ldt(int func, void __user *ptr, unsigned long bytecount)
-{
-	int ret = -ENOSYS;
-
-	switch (func) {
-	case 0:
-		ret = read_ldt(ptr, bytecount);
-		break;
-	case 1:
-		ret = write_ldt(ptr, bytecount, 1);
-		break;
-	case 2:
-		ret = read_default_ldt(ptr, bytecount);
-		break;
-	case 0x11:
-		ret = write_ldt(ptr, bytecount, 0);
-		break;
-	}
-	return ret;
-}
diff --git a/arch/x86_64/kernel/machine_kexec_64.c b/arch/x86_64/kernel/machine_kexec_64.c
deleted file mode 100644
index c3a5547..0000000
--- a/arch/x86_64/kernel/machine_kexec_64.c
+++ /dev/null
@@ -1,259 +0,0 @@
-/*
- * machine_kexec.c - handle transition of Linux booting another kernel
- * Copyright (C) 2002-2005 Eric Biederman  <ebiederm@xmission.com>
- *
- * This source code is licensed under the GNU General Public License,
- * Version 2.  See the file COPYING for more details.
- */
-
-#include <linux/mm.h>
-#include <linux/kexec.h>
-#include <linux/string.h>
-#include <linux/reboot.h>
-#include <asm/pgtable.h>
-#include <asm/tlbflush.h>
-#include <asm/mmu_context.h>
-#include <asm/io.h>
-
-#define PAGE_ALIGNED __attribute__ ((__aligned__(PAGE_SIZE)))
-static u64 kexec_pgd[512] PAGE_ALIGNED;
-static u64 kexec_pud0[512] PAGE_ALIGNED;
-static u64 kexec_pmd0[512] PAGE_ALIGNED;
-static u64 kexec_pte0[512] PAGE_ALIGNED;
-static u64 kexec_pud1[512] PAGE_ALIGNED;
-static u64 kexec_pmd1[512] PAGE_ALIGNED;
-static u64 kexec_pte1[512] PAGE_ALIGNED;
-
-static void init_level2_page(pmd_t *level2p, unsigned long addr)
-{
-	unsigned long end_addr;
-
-	addr &= PAGE_MASK;
-	end_addr = addr + PUD_SIZE;
-	while (addr < end_addr) {
-		set_pmd(level2p++, __pmd(addr | __PAGE_KERNEL_LARGE_EXEC));
-		addr += PMD_SIZE;
-	}
-}
-
-static int init_level3_page(struct kimage *image, pud_t *level3p,
-				unsigned long addr, unsigned long last_addr)
-{
-	unsigned long end_addr;
-	int result;
-
-	result = 0;
-	addr &= PAGE_MASK;
-	end_addr = addr + PGDIR_SIZE;
-	while ((addr < last_addr) && (addr < end_addr)) {
-		struct page *page;
-		pmd_t *level2p;
-
-		page = kimage_alloc_control_pages(image, 0);
-		if (!page) {
-			result = -ENOMEM;
-			goto out;
-		}
-		level2p = (pmd_t *)page_address(page);
-		init_level2_page(level2p, addr);
-		set_pud(level3p++, __pud(__pa(level2p) | _KERNPG_TABLE));
-		addr += PUD_SIZE;
-	}
-	/* clear the unused entries */
-	while (addr < end_addr) {
-		pud_clear(level3p++);
-		addr += PUD_SIZE;
-	}
-out:
-	return result;
-}
-
-
-static int init_level4_page(struct kimage *image, pgd_t *level4p,
-				unsigned long addr, unsigned long last_addr)
-{
-	unsigned long end_addr;
-	int result;
-
-	result = 0;
-	addr &= PAGE_MASK;
-	end_addr = addr + (PTRS_PER_PGD * PGDIR_SIZE);
-	while ((addr < last_addr) && (addr < end_addr)) {
-		struct page *page;
-		pud_t *level3p;
-
-		page = kimage_alloc_control_pages(image, 0);
-		if (!page) {
-			result = -ENOMEM;
-			goto out;
-		}
-		level3p = (pud_t *)page_address(page);
-		result = init_level3_page(image, level3p, addr, last_addr);
-		if (result) {
-			goto out;
-		}
-		set_pgd(level4p++, __pgd(__pa(level3p) | _KERNPG_TABLE));
-		addr += PGDIR_SIZE;
-	}
-	/* clear the unused entries */
-	while (addr < end_addr) {
-		pgd_clear(level4p++);
-		addr += PGDIR_SIZE;
-	}
-out:
-	return result;
-}
-
-
-static int init_pgtable(struct kimage *image, unsigned long start_pgtable)
-{
-	pgd_t *level4p;
-	level4p = (pgd_t *)__va(start_pgtable);
- 	return init_level4_page(image, level4p, 0, end_pfn << PAGE_SHIFT);
-}
-
-static void set_idt(void *newidt, u16 limit)
-{
-	struct desc_ptr curidt;
-
-	/* x86-64 supports unaliged loads & stores */
-	curidt.size    = limit;
-	curidt.address = (unsigned long)newidt;
-
-	__asm__ __volatile__ (
-		"lidtq %0\n"
-		: : "m" (curidt)
-		);
-};
-
-
-static void set_gdt(void *newgdt, u16 limit)
-{
-	struct desc_ptr curgdt;
-
-	/* x86-64 supports unaligned loads & stores */
-	curgdt.size    = limit;
-	curgdt.address = (unsigned long)newgdt;
-
-	__asm__ __volatile__ (
-		"lgdtq %0\n"
-		: : "m" (curgdt)
-		);
-};
-
-static void load_segments(void)
-{
-	__asm__ __volatile__ (
-		"\tmovl %0,%%ds\n"
-		"\tmovl %0,%%es\n"
-		"\tmovl %0,%%ss\n"
-		"\tmovl %0,%%fs\n"
-		"\tmovl %0,%%gs\n"
-		: : "a" (__KERNEL_DS) : "memory"
-		);
-}
-
-int machine_kexec_prepare(struct kimage *image)
-{
-	unsigned long start_pgtable;
-	int result;
-
-	/* Calculate the offsets */
-	start_pgtable = page_to_pfn(image->control_code_page) << PAGE_SHIFT;
-
-	/* Setup the identity mapped 64bit page table */
-	result = init_pgtable(image, start_pgtable);
-	if (result)
-		return result;
-
-	return 0;
-}
-
-void machine_kexec_cleanup(struct kimage *image)
-{
-	return;
-}
-
-/*
- * Do not allocate memory (or fail in any way) in machine_kexec().
- * We are past the point of no return, committed to rebooting now.
- */
-NORET_TYPE void machine_kexec(struct kimage *image)
-{
-	unsigned long page_list[PAGES_NR];
-	void *control_page;
-
-	/* Interrupts aren't acceptable while we reboot */
-	local_irq_disable();
-
-	control_page = page_address(image->control_code_page) + PAGE_SIZE;
-	memcpy(control_page, relocate_kernel, PAGE_SIZE);
-
-	page_list[PA_CONTROL_PAGE] = virt_to_phys(control_page);
-	page_list[VA_CONTROL_PAGE] = (unsigned long)relocate_kernel;
-	page_list[PA_PGD] = virt_to_phys(&kexec_pgd);
-	page_list[VA_PGD] = (unsigned long)kexec_pgd;
-	page_list[PA_PUD_0] = virt_to_phys(&kexec_pud0);
-	page_list[VA_PUD_0] = (unsigned long)kexec_pud0;
-	page_list[PA_PMD_0] = virt_to_phys(&kexec_pmd0);
-	page_list[VA_PMD_0] = (unsigned long)kexec_pmd0;
-	page_list[PA_PTE_0] = virt_to_phys(&kexec_pte0);
-	page_list[VA_PTE_0] = (unsigned long)kexec_pte0;
-	page_list[PA_PUD_1] = virt_to_phys(&kexec_pud1);
-	page_list[VA_PUD_1] = (unsigned long)kexec_pud1;
-	page_list[PA_PMD_1] = virt_to_phys(&kexec_pmd1);
-	page_list[VA_PMD_1] = (unsigned long)kexec_pmd1;
-	page_list[PA_PTE_1] = virt_to_phys(&kexec_pte1);
-	page_list[VA_PTE_1] = (unsigned long)kexec_pte1;
-
-	page_list[PA_TABLE_PAGE] =
-	  (unsigned long)__pa(page_address(image->control_code_page));
-
-	/* The segment registers are funny things, they have both a
-	 * visible and an invisible part.  Whenever the visible part is
-	 * set to a specific selector, the invisible part is loaded
-	 * with from a table in memory.  At no other time is the
-	 * descriptor table in memory accessed.
-	 *
-	 * I take advantage of this here by force loading the
-	 * segments, before I zap the gdt with an invalid value.
-	 */
-	load_segments();
-	/* The gdt & idt are now invalid.
-	 * If you want to load them you must set up your own idt & gdt.
-	 */
-	set_gdt(phys_to_virt(0),0);
-	set_idt(phys_to_virt(0),0);
-
-	/* now call it */
-	relocate_kernel((unsigned long)image->head, (unsigned long)page_list,
-			image->start);
-}
-
-/* crashkernel=size@addr specifies the location to reserve for
- * a crash kernel.  By reserving this memory we guarantee
- * that linux never set's it up as a DMA target.
- * Useful for holding code to do something appropriate
- * after a kernel panic.
- */
-static int __init setup_crashkernel(char *arg)
-{
-	unsigned long size, base;
-	char *p;
-	if (!arg)
-		return -EINVAL;
-	size = memparse(arg, &p);
-	if (arg == p)
-		return -EINVAL;
-	if (*p == '@') {
-		base = memparse(p+1, &p);
-		/* FIXME: Do I want a sanity check to validate the
-		 * memory range?  Yes you do, but it's too early for
-		 * e820 -AK */
-		crashk_res.start = base;
-		crashk_res.end   = base + size - 1;
-	}
-	return 0;
-}
-early_param("crashkernel", setup_crashkernel);
-
diff --git a/arch/x86_64/kernel/mce_64.c b/arch/x86_64/kernel/mce_64.c
deleted file mode 100644
index a66d607..0000000
--- a/arch/x86_64/kernel/mce_64.c
+++ /dev/null
@@ -1,875 +0,0 @@
-/*
- * Machine check handler.
- * K8 parts Copyright 2002,2003 Andi Kleen, SuSE Labs.
- * Rest from unknown author(s). 
- * 2004 Andi Kleen. Rewrote most of it. 
- */
-
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/string.h>
-#include <linux/rcupdate.h>
-#include <linux/kallsyms.h>
-#include <linux/sysdev.h>
-#include <linux/miscdevice.h>
-#include <linux/fs.h>
-#include <linux/capability.h>
-#include <linux/cpu.h>
-#include <linux/percpu.h>
-#include <linux/poll.h>
-#include <linux/thread_info.h>
-#include <linux/ctype.h>
-#include <linux/kmod.h>
-#include <linux/kdebug.h>
-#include <asm/processor.h> 
-#include <asm/msr.h>
-#include <asm/mce.h>
-#include <asm/uaccess.h>
-#include <asm/smp.h>
-#include <asm/idle.h>
-
-#define MISC_MCELOG_MINOR 227
-#define NR_BANKS 6
-
-atomic_t mce_entry;
-
-static int mce_dont_init;
-
-/*
- * Tolerant levels:
- *   0: always panic on uncorrected errors, log corrected errors
- *   1: panic or SIGBUS on uncorrected errors, log corrected errors
- *   2: SIGBUS or log uncorrected errors (if possible), log corrected errors
- *   3: never panic or SIGBUS, log all errors (for testing only)
- */
-static int tolerant = 1;
-static int banks;
-static unsigned long bank[NR_BANKS] = { [0 ... NR_BANKS-1] = ~0UL };
-static unsigned long notify_user;
-static int rip_msr;
-static int mce_bootlog = 1;
-static atomic_t mce_events;
-
-static char trigger[128];
-static char *trigger_argv[2] = { trigger, NULL };
-
-static DECLARE_WAIT_QUEUE_HEAD(mce_wait);
-
-/*
- * Lockless MCE logging infrastructure.
- * This avoids deadlocks on printk locks without having to break locks. Also
- * separate MCEs from kernel messages to avoid bogus bug reports.
- */
-
-struct mce_log mcelog = { 
-	MCE_LOG_SIGNATURE,
-	MCE_LOG_LEN,
-}; 
-
-void mce_log(struct mce *mce)
-{
-	unsigned next, entry;
-	atomic_inc(&mce_events);
-	mce->finished = 0;
-	wmb();
-	for (;;) {
-		entry = rcu_dereference(mcelog.next);
-		/* The rmb forces the compiler to reload next in each
-		    iteration */
-		rmb();
-		for (;;) {
-			/* When the buffer fills up discard new entries. Assume
-			   that the earlier errors are the more interesting. */
-			if (entry >= MCE_LOG_LEN) {
-				set_bit(MCE_OVERFLOW, &mcelog.flags);
-				return;
-			}
-			/* Old left over entry. Skip. */
-			if (mcelog.entry[entry].finished) {
-				entry++;
-				continue;
-			}
-			break;
-		}
-		smp_rmb();
-		next = entry + 1;
-		if (cmpxchg(&mcelog.next, entry, next) == entry)
-			break;
-	}
-	memcpy(mcelog.entry + entry, mce, sizeof(struct mce));
-	wmb();
-	mcelog.entry[entry].finished = 1;
-	wmb();
-
-	set_bit(0, &notify_user);
-}
-
-static void print_mce(struct mce *m)
-{
-	printk(KERN_EMERG "\n"
-	       KERN_EMERG "HARDWARE ERROR\n"
-	       KERN_EMERG
-	       "CPU %d: Machine Check Exception: %16Lx Bank %d: %016Lx\n",
-	       m->cpu, m->mcgstatus, m->bank, m->status);
-	if (m->rip) {
-		printk(KERN_EMERG 
-		       "RIP%s %02x:<%016Lx> ",
-		       !(m->mcgstatus & MCG_STATUS_EIPV) ? " !INEXACT!" : "",
-		       m->cs, m->rip);
-		if (m->cs == __KERNEL_CS)
-			print_symbol("{%s}", m->rip);
-		printk("\n");
-	}
-	printk(KERN_EMERG "TSC %Lx ", m->tsc); 
-	if (m->addr)
-		printk("ADDR %Lx ", m->addr);
-	if (m->misc)
-		printk("MISC %Lx ", m->misc); 	
-	printk("\n");
-	printk(KERN_EMERG "This is not a software problem!\n");
-        printk(KERN_EMERG
-    "Run through mcelog --ascii to decode and contact your hardware vendor\n");
-}
-
-static void mce_panic(char *msg, struct mce *backup, unsigned long start)
-{ 
-	int i;
-
-	oops_begin();
-	for (i = 0; i < MCE_LOG_LEN; i++) {
-		unsigned long tsc = mcelog.entry[i].tsc;
-		if (time_before(tsc, start))
-			continue;
-		print_mce(&mcelog.entry[i]); 
-		if (backup && mcelog.entry[i].tsc == backup->tsc)
-			backup = NULL;
-	}
-	if (backup)
-		print_mce(backup);
-	panic(msg);
-} 
-
-static int mce_available(struct cpuinfo_x86 *c)
-{
-	return cpu_has(c, X86_FEATURE_MCE) && cpu_has(c, X86_FEATURE_MCA);
-}
-
-static inline void mce_get_rip(struct mce *m, struct pt_regs *regs)
-{
-	if (regs && (m->mcgstatus & MCG_STATUS_RIPV)) {
-		m->rip = regs->rip;
-		m->cs = regs->cs;
-	} else {
-		m->rip = 0;
-		m->cs = 0;
-	}
-	if (rip_msr) {
-		/* Assume the RIP in the MSR is exact. Is this true? */
-		m->mcgstatus |= MCG_STATUS_EIPV;
-		rdmsrl(rip_msr, m->rip);
-		m->cs = 0;
-	}
-}
-
-/* 
- * The actual machine check handler
- */
-
-void do_machine_check(struct pt_regs * regs, long error_code)
-{
-	struct mce m, panicm;
-	u64 mcestart = 0;
-	int i;
-	int panicm_found = 0;
-	/*
-	 * If no_way_out gets set, there is no safe way to recover from this
-	 * MCE.  If tolerant is cranked up, we'll try anyway.
-	 */
-	int no_way_out = 0;
-	/*
-	 * If kill_it gets set, there might be a way to recover from this
-	 * error.
-	 */
-	int kill_it = 0;
-
-	atomic_inc(&mce_entry);
-
-	if (regs)
-		notify_die(DIE_NMI, "machine check", regs, error_code, 18, SIGKILL);
-	if (!banks)
-		goto out2;
-
-	memset(&m, 0, sizeof(struct mce));
-	m.cpu = smp_processor_id();
-	rdmsrl(MSR_IA32_MCG_STATUS, m.mcgstatus);
-	/* if the restart IP is not valid, we're done for */
-	if (!(m.mcgstatus & MCG_STATUS_RIPV))
-		no_way_out = 1;
-	
-	rdtscll(mcestart);
-	barrier();
-
-	for (i = 0; i < banks; i++) {
-		if (!bank[i])
-			continue;
-		
-		m.misc = 0; 
-		m.addr = 0;
-		m.bank = i;
-		m.tsc = 0;
-
-		rdmsrl(MSR_IA32_MC0_STATUS + i*4, m.status);
-		if ((m.status & MCI_STATUS_VAL) == 0)
-			continue;
-
-		if (m.status & MCI_STATUS_EN) {
-			/* if PCC was set, there's no way out */
-			no_way_out |= !!(m.status & MCI_STATUS_PCC);
-			/*
-			 * If this error was uncorrectable and there was
-			 * an overflow, we're in trouble.  If no overflow,
-			 * we might get away with just killing a task.
-			 */
-			if (m.status & MCI_STATUS_UC) {
-				if (tolerant < 1 || m.status & MCI_STATUS_OVER)
-					no_way_out = 1;
-				kill_it = 1;
-			}
-		}
-
-		if (m.status & MCI_STATUS_MISCV)
-			rdmsrl(MSR_IA32_MC0_MISC + i*4, m.misc);
-		if (m.status & MCI_STATUS_ADDRV)
-			rdmsrl(MSR_IA32_MC0_ADDR + i*4, m.addr);
-
-		mce_get_rip(&m, regs);
-		if (error_code >= 0)
-			rdtscll(m.tsc);
-		if (error_code != -2)
-			mce_log(&m);
-
-		/* Did this bank cause the exception? */
-		/* Assume that the bank with uncorrectable errors did it,
-		   and that there is only a single one. */
-		if ((m.status & MCI_STATUS_UC) && (m.status & MCI_STATUS_EN)) {
-			panicm = m;
-			panicm_found = 1;
-		}
-
-		add_taint(TAINT_MACHINE_CHECK);
-	}
-
-	/* Never do anything final in the polling timer */
-	if (!regs)
-		goto out;
-
-	/* If we didn't find an uncorrectable error, pick
-	   the last one (shouldn't happen, just being safe). */
-	if (!panicm_found)
-		panicm = m;
-
-	/*
-	 * If we have decided that we just CAN'T continue, and the user
-	 *  has not set tolerant to an insane level, give up and die.
-	 */
-	if (no_way_out && tolerant < 3)
-		mce_panic("Machine check", &panicm, mcestart);
-
-	/*
-	 * If the error seems to be unrecoverable, something should be
-	 * done.  Try to kill as little as possible.  If we can kill just
-	 * one task, do that.  If the user has set the tolerance very
-	 * high, don't try to do anything at all.
-	 */
-	if (kill_it && tolerant < 3) {
-		int user_space = 0;
-
-		/*
-		 * If the EIPV bit is set, it means the saved IP is the
-		 * instruction which caused the MCE.
-		 */
-		if (m.mcgstatus & MCG_STATUS_EIPV)
-			user_space = panicm.rip && (panicm.cs & 3);
-
-		/*
-		 * If we know that the error was in user space, send a
-		 * SIGBUS.  Otherwise, panic if tolerance is low.
-		 *
-		 * do_exit() takes an awful lot of locks and has a slight
-		 * risk of deadlocking.
-		 */
-		if (user_space) {
-			do_exit(SIGBUS);
-		} else if (panic_on_oops || tolerant < 2) {
-			mce_panic("Uncorrected machine check",
-				&panicm, mcestart);
-		}
-	}
-
-	/* notify userspace ASAP */
-	set_thread_flag(TIF_MCE_NOTIFY);
-
- out:
-	/* the last thing we do is clear state */
-	for (i = 0; i < banks; i++)
-		wrmsrl(MSR_IA32_MC0_STATUS+4*i, 0);
-	wrmsrl(MSR_IA32_MCG_STATUS, 0);
- out2:
-	atomic_dec(&mce_entry);
-}
-
-#ifdef CONFIG_X86_MCE_INTEL
-/***
- * mce_log_therm_throt_event - Logs the thermal throttling event to mcelog
- * @cpu: The CPU on which the event occured.
- * @status: Event status information
- *
- * This function should be called by the thermal interrupt after the
- * event has been processed and the decision was made to log the event
- * further.
- *
- * The status parameter will be saved to the 'status' field of 'struct mce'
- * and historically has been the register value of the
- * MSR_IA32_THERMAL_STATUS (Intel) msr.
- */
-void mce_log_therm_throt_event(unsigned int cpu, __u64 status)
-{
-	struct mce m;
-
-	memset(&m, 0, sizeof(m));
-	m.cpu = cpu;
-	m.bank = MCE_THERMAL_BANK;
-	m.status = status;
-	rdtscll(m.tsc);
-	mce_log(&m);
-}
-#endif /* CONFIG_X86_MCE_INTEL */
-
-/*
- * Periodic polling timer for "silent" machine check errors.  If the
- * poller finds an MCE, poll 2x faster.  When the poller finds no more
- * errors, poll 2x slower (up to check_interval seconds).
- */
-
-static int check_interval = 5 * 60; /* 5 minutes */
-static int next_interval; /* in jiffies */
-static void mcheck_timer(struct work_struct *work);
-static DECLARE_DELAYED_WORK(mcheck_work, mcheck_timer);
-
-static void mcheck_check_cpu(void *info)
-{
-	if (mce_available(&current_cpu_data))
-		do_machine_check(NULL, 0);
-}
-
-static void mcheck_timer(struct work_struct *work)
-{
-	on_each_cpu(mcheck_check_cpu, NULL, 1, 1);
-
-	/*
-	 * Alert userspace if needed.  If we logged an MCE, reduce the
-	 * polling interval, otherwise increase the polling interval.
-	 */
-	if (mce_notify_user()) {
-		next_interval = max(next_interval/2, HZ/100);
-	} else {
-		next_interval = min(next_interval*2,
-				(int)round_jiffies_relative(check_interval*HZ));
-	}
-
-	schedule_delayed_work(&mcheck_work, next_interval);
-}
-
-/*
- * This is only called from process context.  This is where we do
- * anything we need to alert userspace about new MCEs.  This is called
- * directly from the poller and also from entry.S and idle, thanks to
- * TIF_MCE_NOTIFY.
- */
-int mce_notify_user(void)
-{
-	clear_thread_flag(TIF_MCE_NOTIFY);
-	if (test_and_clear_bit(0, &notify_user)) {
-		static unsigned long last_print;
-		unsigned long now = jiffies;
-
-		wake_up_interruptible(&mce_wait);
-		if (trigger[0])
-			call_usermodehelper(trigger, trigger_argv, NULL,
-						UMH_NO_WAIT);
-
-		if (time_after_eq(now, last_print + (check_interval*HZ))) {
-			last_print = now;
-			printk(KERN_INFO "Machine check events logged\n");
-		}
-
-		return 1;
-	}
-	return 0;
-}
-
-/* see if the idle task needs to notify userspace */
-static int
-mce_idle_callback(struct notifier_block *nfb, unsigned long action, void *junk)
-{
-	/* IDLE_END should be safe - interrupts are back on */
-	if (action == IDLE_END && test_thread_flag(TIF_MCE_NOTIFY))
-		mce_notify_user();
-
-	return NOTIFY_OK;
-}
-
-static struct notifier_block mce_idle_notifier = {
-	.notifier_call = mce_idle_callback,
-};
-
-static __init int periodic_mcheck_init(void)
-{ 
-	next_interval = check_interval * HZ;
-	if (next_interval)
-		schedule_delayed_work(&mcheck_work,
-				      round_jiffies_relative(next_interval));
-	idle_notifier_register(&mce_idle_notifier);
-	return 0;
-} 
-__initcall(periodic_mcheck_init);
-
-
-/* 
- * Initialize Machine Checks for a CPU.
- */
-static void mce_init(void *dummy)
-{
-	u64 cap;
-	int i;
-
-	rdmsrl(MSR_IA32_MCG_CAP, cap);
-	banks = cap & 0xff;
-	if (banks > NR_BANKS) { 
-		printk(KERN_INFO "MCE: warning: using only %d banks\n", banks);
-		banks = NR_BANKS; 
-	}
-	/* Use accurate RIP reporting if available. */
-	if ((cap & (1<<9)) && ((cap >> 16) & 0xff) >= 9)
-		rip_msr = MSR_IA32_MCG_EIP;
-
-	/* Log the machine checks left over from the previous reset.
-	   This also clears all registers */
-	do_machine_check(NULL, mce_bootlog ? -1 : -2);
-
-	set_in_cr4(X86_CR4_MCE);
-
-	if (cap & MCG_CTL_P)
-		wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
-
-	for (i = 0; i < banks; i++) {
-		wrmsrl(MSR_IA32_MC0_CTL+4*i, bank[i]);
-		wrmsrl(MSR_IA32_MC0_STATUS+4*i, 0);
-	}	
-}
-
-/* Add per CPU specific workarounds here */
-static void __cpuinit mce_cpu_quirks(struct cpuinfo_x86 *c)
-{ 
-	/* This should be disabled by the BIOS, but isn't always */
-	if (c->x86_vendor == X86_VENDOR_AMD && c->x86 == 15) {
-		/* disable GART TBL walk error reporting, which trips off 
-		   incorrectly with the IOMMU & 3ware & Cerberus. */
-		clear_bit(10, &bank[4]);
-		/* Lots of broken BIOS around that don't clear them
-		   by default and leave crap in there. Don't log. */
-		mce_bootlog = 0;
-	}
-
-}			
-
-static void __cpuinit mce_cpu_features(struct cpuinfo_x86 *c)
-{
-	switch (c->x86_vendor) {
-	case X86_VENDOR_INTEL:
-		mce_intel_feature_init(c);
-		break;
-	case X86_VENDOR_AMD:
-		mce_amd_feature_init(c);
-		break;
-	default:
-		break;
-	}
-}
-
-/* 
- * Called for each booted CPU to set up machine checks.
- * Must be called with preempt off. 
- */
-void __cpuinit mcheck_init(struct cpuinfo_x86 *c)
-{
-	static cpumask_t mce_cpus = CPU_MASK_NONE;
-
-	mce_cpu_quirks(c); 
-
-	if (mce_dont_init ||
-	    cpu_test_and_set(smp_processor_id(), mce_cpus) ||
-	    !mce_available(c))
-		return;
-
-	mce_init(NULL);
-	mce_cpu_features(c);
-}
-
-/*
- * Character device to read and clear the MCE log.
- */
-
-static DEFINE_SPINLOCK(mce_state_lock);
-static int open_count;	/* #times opened */
-static int open_exclu;	/* already open exclusive? */
-
-static int mce_open(struct inode *inode, struct file *file)
-{
-	spin_lock(&mce_state_lock);
-
-	if (open_exclu || (open_count && (file->f_flags & O_EXCL))) {
-		spin_unlock(&mce_state_lock);
-		return -EBUSY;
-	}
-
-	if (file->f_flags & O_EXCL)
-		open_exclu = 1;
-	open_count++;
-
-	spin_unlock(&mce_state_lock);
-
-	return nonseekable_open(inode, file);
-}
-
-static int mce_release(struct inode *inode, struct file *file)
-{
-	spin_lock(&mce_state_lock);
-
-	open_count--;
-	open_exclu = 0;
-
-	spin_unlock(&mce_state_lock);
-
-	return 0;
-}
-
-static void collect_tscs(void *data) 
-{ 
-	unsigned long *cpu_tsc = (unsigned long *)data;
-	rdtscll(cpu_tsc[smp_processor_id()]);
-} 
-
-static ssize_t mce_read(struct file *filp, char __user *ubuf, size_t usize, loff_t *off)
-{
-	unsigned long *cpu_tsc;
-	static DECLARE_MUTEX(mce_read_sem);
-	unsigned next;
-	char __user *buf = ubuf;
-	int i, err;
-
-	cpu_tsc = kmalloc(NR_CPUS * sizeof(long), GFP_KERNEL);
-	if (!cpu_tsc)
-		return -ENOMEM;
-
-	down(&mce_read_sem); 
-	next = rcu_dereference(mcelog.next);
-
-	/* Only supports full reads right now */
-	if (*off != 0 || usize < MCE_LOG_LEN*sizeof(struct mce)) { 
-		up(&mce_read_sem);
-		kfree(cpu_tsc);
-		return -EINVAL;
-	}
-
-	err = 0;
-	for (i = 0; i < next; i++) {		
-		unsigned long start = jiffies;
-		while (!mcelog.entry[i].finished) {
-			if (time_after_eq(jiffies, start + 2)) {
-				memset(mcelog.entry + i,0, sizeof(struct mce));
-				goto timeout;
-			}
-			cpu_relax();
-		}
-		smp_rmb();
-		err |= copy_to_user(buf, mcelog.entry + i, sizeof(struct mce));
-		buf += sizeof(struct mce); 
- timeout:
-		;
-	} 
-
-	memset(mcelog.entry, 0, next * sizeof(struct mce));
-	mcelog.next = 0;
-
-	synchronize_sched();
-
-	/* Collect entries that were still getting written before the synchronize. */
-
-	on_each_cpu(collect_tscs, cpu_tsc, 1, 1);
-	for (i = next; i < MCE_LOG_LEN; i++) { 
-		if (mcelog.entry[i].finished && 
-		    mcelog.entry[i].tsc < cpu_tsc[mcelog.entry[i].cpu]) {  
-			err |= copy_to_user(buf, mcelog.entry+i, sizeof(struct mce));
-			smp_rmb();
-			buf += sizeof(struct mce);
-			memset(&mcelog.entry[i], 0, sizeof(struct mce));
-		}
-	} 	
-	up(&mce_read_sem);
-	kfree(cpu_tsc);
-	return err ? -EFAULT : buf - ubuf; 
-}
-
-static unsigned int mce_poll(struct file *file, poll_table *wait)
-{
-	poll_wait(file, &mce_wait, wait);
-	if (rcu_dereference(mcelog.next))
-		return POLLIN | POLLRDNORM;
-	return 0;
-}
-
-static int mce_ioctl(struct inode *i, struct file *f,unsigned int cmd, unsigned long arg)
-{
-	int __user *p = (int __user *)arg;
-	if (!capable(CAP_SYS_ADMIN))
-		return -EPERM; 
-	switch (cmd) {
-	case MCE_GET_RECORD_LEN: 
-		return put_user(sizeof(struct mce), p);
-	case MCE_GET_LOG_LEN:
-		return put_user(MCE_LOG_LEN, p);		
-	case MCE_GETCLEAR_FLAGS: {
-		unsigned flags;
-		do { 
-			flags = mcelog.flags;
-		} while (cmpxchg(&mcelog.flags, flags, 0) != flags); 
-		return put_user(flags, p); 
-	}
-	default:
-		return -ENOTTY; 
-	} 
-}
-
-static const struct file_operations mce_chrdev_ops = {
-	.open = mce_open,
-	.release = mce_release,
-	.read = mce_read,
-	.poll = mce_poll,
-	.ioctl = mce_ioctl,
-};
-
-static struct miscdevice mce_log_device = {
-	MISC_MCELOG_MINOR,
-	"mcelog",
-	&mce_chrdev_ops,
-};
-
-static unsigned long old_cr4 __initdata;
-
-void __init stop_mce(void)
-{
-	old_cr4 = read_cr4();
-	clear_in_cr4(X86_CR4_MCE);
-}
-
-void __init restart_mce(void)
-{
-	if (old_cr4 & X86_CR4_MCE)
-		set_in_cr4(X86_CR4_MCE);
-}
-
-/* 
- * Old style boot options parsing. Only for compatibility. 
- */
-
-static int __init mcheck_disable(char *str)
-{
-	mce_dont_init = 1;
-	return 1;
-}
-
-/* mce=off disables machine check. Note you can reenable it later
-   using sysfs.
-   mce=TOLERANCELEVEL (number, see above)
-   mce=bootlog Log MCEs from before booting. Disabled by default on AMD.
-   mce=nobootlog Don't log MCEs from before booting. */
-static int __init mcheck_enable(char *str)
-{
-	if (*str == '=')
-		str++;
-	if (!strcmp(str, "off"))
-		mce_dont_init = 1;
-	else if (!strcmp(str, "bootlog") || !strcmp(str,"nobootlog"))
-		mce_bootlog = str[0] == 'b';
-	else if (isdigit(str[0]))
-		get_option(&str, &tolerant);
-	else
-		printk("mce= argument %s ignored. Please use /sys", str); 
-	return 1;
-}
-
-__setup("nomce", mcheck_disable);
-__setup("mce", mcheck_enable);
-
-/* 
- * Sysfs support
- */ 
-
-/* On resume clear all MCE state. Don't want to see leftovers from the BIOS.
-   Only one CPU is active at this time, the others get readded later using
-   CPU hotplug. */
-static int mce_resume(struct sys_device *dev)
-{
-	mce_init(NULL);
-	return 0;
-}
-
-/* Reinit MCEs after user configuration changes */
-static void mce_restart(void) 
-{ 
-	if (next_interval)
-		cancel_delayed_work(&mcheck_work);
-	/* Timer race is harmless here */
-	on_each_cpu(mce_init, NULL, 1, 1);       
-	next_interval = check_interval * HZ;
-	if (next_interval)
-		schedule_delayed_work(&mcheck_work,
-				      round_jiffies_relative(next_interval));
-}
-
-static struct sysdev_class mce_sysclass = {
-	.resume = mce_resume,
-	set_kset_name("machinecheck"),
-};
-
-DEFINE_PER_CPU(struct sys_device, device_mce);
-
-/* Why are there no generic functions for this? */
-#define ACCESSOR(name, var, start) \
-	static ssize_t show_ ## name(struct sys_device *s, char *buf) { 	   	   \
-		return sprintf(buf, "%lx\n", (unsigned long)var);		   \
-	} 									   \
-	static ssize_t set_ ## name(struct sys_device *s,const char *buf,size_t siz) { \
-		char *end; 							   \
-		unsigned long new = simple_strtoul(buf, &end, 0); 		   \
-		if (end == buf) return -EINVAL;					   \
-		var = new;							   \
-		start; 								   \
-		return end-buf;		     					   \
-	}									   \
-	static SYSDEV_ATTR(name, 0644, show_ ## name, set_ ## name);
-
-/* TBD should generate these dynamically based on number of available banks */
-ACCESSOR(bank0ctl,bank[0],mce_restart())
-ACCESSOR(bank1ctl,bank[1],mce_restart())
-ACCESSOR(bank2ctl,bank[2],mce_restart())
-ACCESSOR(bank3ctl,bank[3],mce_restart())
-ACCESSOR(bank4ctl,bank[4],mce_restart())
-ACCESSOR(bank5ctl,bank[5],mce_restart())
-
-static ssize_t show_trigger(struct sys_device *s, char *buf)
-{
-	strcpy(buf, trigger);
-	strcat(buf, "\n");
-	return strlen(trigger) + 1;
-}
-
-static ssize_t set_trigger(struct sys_device *s,const char *buf,size_t siz)
-{
-	char *p;
-	int len;
-	strncpy(trigger, buf, sizeof(trigger));
-	trigger[sizeof(trigger)-1] = 0;
-	len = strlen(trigger);
-	p = strchr(trigger, '\n');
-	if (*p) *p = 0;
-	return len;
-}
-
-static SYSDEV_ATTR(trigger, 0644, show_trigger, set_trigger);
-ACCESSOR(tolerant,tolerant,)
-ACCESSOR(check_interval,check_interval,mce_restart())
-static struct sysdev_attribute *mce_attributes[] = {
-	&attr_bank0ctl, &attr_bank1ctl, &attr_bank2ctl,
-	&attr_bank3ctl, &attr_bank4ctl, &attr_bank5ctl,
-	&attr_tolerant, &attr_check_interval, &attr_trigger,
-	NULL
-};
-
-/* Per cpu sysdev init.  All of the cpus still share the same ctl bank */
-static __cpuinit int mce_create_device(unsigned int cpu)
-{
-	int err;
-	int i;
-	if (!mce_available(&cpu_data[cpu]))
-		return -EIO;
-
-	per_cpu(device_mce,cpu).id = cpu;
-	per_cpu(device_mce,cpu).cls = &mce_sysclass;
-
-	err = sysdev_register(&per_cpu(device_mce,cpu));
-
-	if (!err) {
-		for (i = 0; mce_attributes[i]; i++)
-			sysdev_create_file(&per_cpu(device_mce,cpu),
-				mce_attributes[i]);
-	}
-	return err;
-}
-
-static void mce_remove_device(unsigned int cpu)
-{
-	int i;
-
-	for (i = 0; mce_attributes[i]; i++)
-		sysdev_remove_file(&per_cpu(device_mce,cpu),
-			mce_attributes[i]);
-	sysdev_unregister(&per_cpu(device_mce,cpu));
-	memset(&per_cpu(device_mce, cpu).kobj, 0, sizeof(struct kobject));
-}
-
-/* Get notified when a cpu comes on/off. Be hotplug friendly. */
-static int
-mce_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu)
-{
-	unsigned int cpu = (unsigned long)hcpu;
-
-	switch (action) {
-	case CPU_ONLINE:
-	case CPU_ONLINE_FROZEN:
-		mce_create_device(cpu);
-		break;
-	case CPU_DEAD:
-	case CPU_DEAD_FROZEN:
-		mce_remove_device(cpu);
-		break;
-	}
-	return NOTIFY_OK;
-}
-
-static struct notifier_block mce_cpu_notifier = {
-	.notifier_call = mce_cpu_callback,
-};
-
-static __init int mce_init_device(void)
-{
-	int err;
-	int i = 0;
-
-	if (!mce_available(&boot_cpu_data))
-		return -EIO;
-	err = sysdev_class_register(&mce_sysclass);
-
-	for_each_online_cpu(i) {
-		mce_create_device(i);
-	}
-
-	register_hotcpu_notifier(&mce_cpu_notifier);
-	misc_register(&mce_log_device);
-	return err;
-}
-
-device_initcall(mce_init_device);
diff --git a/arch/x86_64/kernel/mce_amd_64.c b/arch/x86_64/kernel/mce_amd_64.c
deleted file mode 100644
index 2f8a7f1..0000000
--- a/arch/x86_64/kernel/mce_amd_64.c
+++ /dev/null
@@ -1,689 +0,0 @@
-/*
- *  (c) 2005, 2006 Advanced Micro Devices, Inc.
- *  Your use of this code is subject to the terms and conditions of the
- *  GNU general public license version 2. See "COPYING" or
- *  http://www.gnu.org/licenses/gpl.html
- *
- *  Written by Jacob Shin - AMD, Inc.
- *
- *  Support : jacob.shin@amd.com
- *
- *  April 2006
- *     - added support for AMD Family 0x10 processors
- *
- *  All MC4_MISCi registers are shared between multi-cores
- */
-
-#include <linux/cpu.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/kobject.h>
-#include <linux/notifier.h>
-#include <linux/sched.h>
-#include <linux/smp.h>
-#include <linux/sysdev.h>
-#include <linux/sysfs.h>
-#include <asm/apic.h>
-#include <asm/mce.h>
-#include <asm/msr.h>
-#include <asm/percpu.h>
-#include <asm/idle.h>
-
-#define PFX               "mce_threshold: "
-#define VERSION           "version 1.1.1"
-#define NR_BANKS          6
-#define NR_BLOCKS         9
-#define THRESHOLD_MAX     0xFFF
-#define INT_TYPE_APIC     0x00020000
-#define MASK_VALID_HI     0x80000000
-#define MASK_CNTP_HI      0x40000000
-#define MASK_LOCKED_HI    0x20000000
-#define MASK_LVTOFF_HI    0x00F00000
-#define MASK_COUNT_EN_HI  0x00080000
-#define MASK_INT_TYPE_HI  0x00060000
-#define MASK_OVERFLOW_HI  0x00010000
-#define MASK_ERR_COUNT_HI 0x00000FFF
-#define MASK_BLKPTR_LO    0xFF000000
-#define MCG_XBLK_ADDR     0xC0000400
-
-struct threshold_block {
-	unsigned int block;
-	unsigned int bank;
-	unsigned int cpu;
-	u32 address;
-	u16 interrupt_enable;
-	u16 threshold_limit;
-	struct kobject kobj;
-	struct list_head miscj;
-};
-
-/* defaults used early on boot */
-static struct threshold_block threshold_defaults = {
-	.interrupt_enable = 0,
-	.threshold_limit = THRESHOLD_MAX,
-};
-
-struct threshold_bank {
-	struct kobject kobj;
-	struct threshold_block *blocks;
-	cpumask_t cpus;
-};
-static DEFINE_PER_CPU(struct threshold_bank *, threshold_banks[NR_BANKS]);
-
-#ifdef CONFIG_SMP
-static unsigned char shared_bank[NR_BANKS] = {
-	0, 0, 0, 0, 1
-};
-#endif
-
-static DEFINE_PER_CPU(unsigned char, bank_map);	/* see which banks are on */
-
-/*
- * CPU Initialization
- */
-
-/* must be called with correct cpu affinity */
-static void threshold_restart_bank(struct threshold_block *b,
-				   int reset, u16 old_limit)
-{
-	u32 mci_misc_hi, mci_misc_lo;
-
-	rdmsr(b->address, mci_misc_lo, mci_misc_hi);
-
-	if (b->threshold_limit < (mci_misc_hi & THRESHOLD_MAX))
-		reset = 1;	/* limit cannot be lower than err count */
-
-	if (reset) {		/* reset err count and overflow bit */
-		mci_misc_hi =
-		    (mci_misc_hi & ~(MASK_ERR_COUNT_HI | MASK_OVERFLOW_HI)) |
-		    (THRESHOLD_MAX - b->threshold_limit);
-	} else if (old_limit) {	/* change limit w/o reset */
-		int new_count = (mci_misc_hi & THRESHOLD_MAX) +
-		    (old_limit - b->threshold_limit);
-		mci_misc_hi = (mci_misc_hi & ~MASK_ERR_COUNT_HI) |
-		    (new_count & THRESHOLD_MAX);
-	}
-
-	b->interrupt_enable ?
-	    (mci_misc_hi = (mci_misc_hi & ~MASK_INT_TYPE_HI) | INT_TYPE_APIC) :
-	    (mci_misc_hi &= ~MASK_INT_TYPE_HI);
-
-	mci_misc_hi |= MASK_COUNT_EN_HI;
-	wrmsr(b->address, mci_misc_lo, mci_misc_hi);
-}
-
-/* cpu init entry point, called from mce.c with preempt off */
-void __cpuinit mce_amd_feature_init(struct cpuinfo_x86 *c)
-{
-	unsigned int bank, block;
-	unsigned int cpu = smp_processor_id();
-	u32 low = 0, high = 0, address = 0;
-
-	for (bank = 0; bank < NR_BANKS; ++bank) {
-		for (block = 0; block < NR_BLOCKS; ++block) {
-			if (block == 0)
-				address = MSR_IA32_MC0_MISC + bank * 4;
-			else if (block == 1) {
-				address = (low & MASK_BLKPTR_LO) >> 21;
-				if (!address)
-					break;
-				address += MCG_XBLK_ADDR;
-			}
-			else
-				++address;
-
-			if (rdmsr_safe(address, &low, &high))
-				break;
-
-			if (!(high & MASK_VALID_HI)) {
-				if (block)
-					continue;
-				else
-					break;
-			}
-
-			if (!(high & MASK_CNTP_HI)  ||
-			     (high & MASK_LOCKED_HI))
-				continue;
-
-			if (!block)
-				per_cpu(bank_map, cpu) |= (1 << bank);
-#ifdef CONFIG_SMP
-			if (shared_bank[bank] && c->cpu_core_id)
-				break;
-#endif
-			high &= ~MASK_LVTOFF_HI;
-			high |= K8_APIC_EXT_LVT_ENTRY_THRESHOLD << 20;
-			wrmsr(address, low, high);
-
-			setup_APIC_extended_lvt(K8_APIC_EXT_LVT_ENTRY_THRESHOLD,
-						THRESHOLD_APIC_VECTOR,
-						K8_APIC_EXT_INT_MSG_FIX, 0);
-
-			threshold_defaults.address = address;
-			threshold_restart_bank(&threshold_defaults, 0, 0);
-		}
-	}
-}
-
-/*
- * APIC Interrupt Handler
- */
-
-/*
- * threshold interrupt handler will service THRESHOLD_APIC_VECTOR.
- * the interrupt goes off when error_count reaches threshold_limit.
- * the handler will simply log mcelog w/ software defined bank number.
- */
-asmlinkage void mce_threshold_interrupt(void)
-{
-	unsigned int bank, block;
-	struct mce m;
-	u32 low = 0, high = 0, address = 0;
-
-	ack_APIC_irq();
-	exit_idle();
-	irq_enter();
-
-	memset(&m, 0, sizeof(m));
-	rdtscll(m.tsc);
-	m.cpu = smp_processor_id();
-
-	/* assume first bank caused it */
-	for (bank = 0; bank < NR_BANKS; ++bank) {
-		if (!(per_cpu(bank_map, m.cpu) & (1 << bank)))
-			continue;
-		for (block = 0; block < NR_BLOCKS; ++block) {
-			if (block == 0)
-				address = MSR_IA32_MC0_MISC + bank * 4;
-			else if (block == 1) {
-				address = (low & MASK_BLKPTR_LO) >> 21;
-				if (!address)
-					break;
-				address += MCG_XBLK_ADDR;
-			}
-			else
-				++address;
-
-			if (rdmsr_safe(address, &low, &high))
-				break;
-
-			if (!(high & MASK_VALID_HI)) {
-				if (block)
-					continue;
-				else
-					break;
-			}
-
-			if (!(high & MASK_CNTP_HI)  ||
-			     (high & MASK_LOCKED_HI))
-				continue;
-
-			/* Log the machine check that caused the threshold
-			   event. */
-			do_machine_check(NULL, 0);
-
-			if (high & MASK_OVERFLOW_HI) {
-				rdmsrl(address, m.misc);
-				rdmsrl(MSR_IA32_MC0_STATUS + bank * 4,
-				       m.status);
-				m.bank = K8_MCE_THRESHOLD_BASE
-				       + bank * NR_BLOCKS
-				       + block;
-				mce_log(&m);
-				goto out;
-			}
-		}
-	}
-out:
-	irq_exit();
-}
-
-/*
- * Sysfs Interface
- */
-
-struct threshold_attr {
-	struct attribute attr;
-	ssize_t(*show) (struct threshold_block *, char *);
-	ssize_t(*store) (struct threshold_block *, const char *, size_t count);
-};
-
-static cpumask_t affinity_set(unsigned int cpu)
-{
-	cpumask_t oldmask = current->cpus_allowed;
-	cpumask_t newmask = CPU_MASK_NONE;
-	cpu_set(cpu, newmask);
-	set_cpus_allowed(current, newmask);
-	return oldmask;
-}
-
-static void affinity_restore(cpumask_t oldmask)
-{
-	set_cpus_allowed(current, oldmask);
-}
-
-#define SHOW_FIELDS(name)                                           \
-static ssize_t show_ ## name(struct threshold_block * b, char *buf) \
-{                                                                   \
-        return sprintf(buf, "%lx\n", (unsigned long) b->name);      \
-}
-SHOW_FIELDS(interrupt_enable)
-SHOW_FIELDS(threshold_limit)
-
-static ssize_t store_interrupt_enable(struct threshold_block *b,
-				      const char *buf, size_t count)
-{
-	char *end;
-	cpumask_t oldmask;
-	unsigned long new = simple_strtoul(buf, &end, 0);
-	if (end == buf)
-		return -EINVAL;
-	b->interrupt_enable = !!new;
-
-	oldmask = affinity_set(b->cpu);
-	threshold_restart_bank(b, 0, 0);
-	affinity_restore(oldmask);
-
-	return end - buf;
-}
-
-static ssize_t store_threshold_limit(struct threshold_block *b,
-				     const char *buf, size_t count)
-{
-	char *end;
-	cpumask_t oldmask;
-	u16 old;
-	unsigned long new = simple_strtoul(buf, &end, 0);
-	if (end == buf)
-		return -EINVAL;
-	if (new > THRESHOLD_MAX)
-		new = THRESHOLD_MAX;
-	if (new < 1)
-		new = 1;
-	old = b->threshold_limit;
-	b->threshold_limit = new;
-
-	oldmask = affinity_set(b->cpu);
-	threshold_restart_bank(b, 0, old);
-	affinity_restore(oldmask);
-
-	return end - buf;
-}
-
-static ssize_t show_error_count(struct threshold_block *b, char *buf)
-{
-	u32 high, low;
-	cpumask_t oldmask;
-	oldmask = affinity_set(b->cpu);
-	rdmsr(b->address, low, high);
-	affinity_restore(oldmask);
-	return sprintf(buf, "%x\n",
-		       (high & 0xFFF) - (THRESHOLD_MAX - b->threshold_limit));
-}
-
-static ssize_t store_error_count(struct threshold_block *b,
-				 const char *buf, size_t count)
-{
-	cpumask_t oldmask;
-	oldmask = affinity_set(b->cpu);
-	threshold_restart_bank(b, 1, 0);
-	affinity_restore(oldmask);
-	return 1;
-}
-
-#define THRESHOLD_ATTR(_name,_mode,_show,_store) {            \
-        .attr = {.name = __stringify(_name), .mode = _mode }, \
-        .show = _show,                                        \
-        .store = _store,                                      \
-};
-
-#define RW_ATTR(name)                                           \
-static struct threshold_attr name =                             \
-        THRESHOLD_ATTR(name, 0644, show_## name, store_## name)
-
-RW_ATTR(interrupt_enable);
-RW_ATTR(threshold_limit);
-RW_ATTR(error_count);
-
-static struct attribute *default_attrs[] = {
-	&interrupt_enable.attr,
-	&threshold_limit.attr,
-	&error_count.attr,
-	NULL
-};
-
-#define to_block(k) container_of(k, struct threshold_block, kobj)
-#define to_attr(a) container_of(a, struct threshold_attr, attr)
-
-static ssize_t show(struct kobject *kobj, struct attribute *attr, char *buf)
-{
-	struct threshold_block *b = to_block(kobj);
-	struct threshold_attr *a = to_attr(attr);
-	ssize_t ret;
-	ret = a->show ? a->show(b, buf) : -EIO;
-	return ret;
-}
-
-static ssize_t store(struct kobject *kobj, struct attribute *attr,
-		     const char *buf, size_t count)
-{
-	struct threshold_block *b = to_block(kobj);
-	struct threshold_attr *a = to_attr(attr);
-	ssize_t ret;
-	ret = a->store ? a->store(b, buf, count) : -EIO;
-	return ret;
-}
-
-static struct sysfs_ops threshold_ops = {
-	.show = show,
-	.store = store,
-};
-
-static struct kobj_type threshold_ktype = {
-	.sysfs_ops = &threshold_ops,
-	.default_attrs = default_attrs,
-};
-
-static __cpuinit int allocate_threshold_blocks(unsigned int cpu,
-					       unsigned int bank,
-					       unsigned int block,
-					       u32 address)
-{
-	int err;
-	u32 low, high;
-	struct threshold_block *b = NULL;
-
-	if ((bank >= NR_BANKS) || (block >= NR_BLOCKS))
-		return 0;
-
-	if (rdmsr_safe(address, &low, &high))
-		return 0;
-
-	if (!(high & MASK_VALID_HI)) {
-		if (block)
-			goto recurse;
-		else
-			return 0;
-	}
-
-	if (!(high & MASK_CNTP_HI)  ||
-	     (high & MASK_LOCKED_HI))
-		goto recurse;
-
-	b = kzalloc(sizeof(struct threshold_block), GFP_KERNEL);
-	if (!b)
-		return -ENOMEM;
-
-	b->block = block;
-	b->bank = bank;
-	b->cpu = cpu;
-	b->address = address;
-	b->interrupt_enable = 0;
-	b->threshold_limit = THRESHOLD_MAX;
-
-	INIT_LIST_HEAD(&b->miscj);
-
-	if (per_cpu(threshold_banks, cpu)[bank]->blocks)
-		list_add(&b->miscj,
-			 &per_cpu(threshold_banks, cpu)[bank]->blocks->miscj);
-	else
-		per_cpu(threshold_banks, cpu)[bank]->blocks = b;
-
-	kobject_set_name(&b->kobj, "misc%i", block);
-	b->kobj.parent = &per_cpu(threshold_banks, cpu)[bank]->kobj;
-	b->kobj.ktype = &threshold_ktype;
-	err = kobject_register(&b->kobj);
-	if (err)
-		goto out_free;
-recurse:
-	if (!block) {
-		address = (low & MASK_BLKPTR_LO) >> 21;
-		if (!address)
-			return 0;
-		address += MCG_XBLK_ADDR;
-	} else
-		++address;
-
-	err = allocate_threshold_blocks(cpu, bank, ++block, address);
-	if (err)
-		goto out_free;
-
-	return err;
-
-out_free:
-	if (b) {
-		kobject_unregister(&b->kobj);
-		kfree(b);
-	}
-	return err;
-}
-
-/* symlinks sibling shared banks to first core.  first core owns dir/files. */
-static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank)
-{
-	int i, err = 0;
-	struct threshold_bank *b = NULL;
-	cpumask_t oldmask = CPU_MASK_NONE;
-	char name[32];
-
-	sprintf(name, "threshold_bank%i", bank);
-
-#ifdef CONFIG_SMP
-	if (cpu_data[cpu].cpu_core_id && shared_bank[bank]) {	/* symlink */
-		i = first_cpu(cpu_core_map[cpu]);
-
-		/* first core not up yet */
-		if (cpu_data[i].cpu_core_id)
-			goto out;
-
-		/* already linked */
-		if (per_cpu(threshold_banks, cpu)[bank])
-			goto out;
-
-		b = per_cpu(threshold_banks, i)[bank];
-
-		if (!b)
-			goto out;
-
-		err = sysfs_create_link(&per_cpu(device_mce, cpu).kobj,
-					&b->kobj, name);
-		if (err)
-			goto out;
-
-		b->cpus = cpu_core_map[cpu];
-		per_cpu(threshold_banks, cpu)[bank] = b;
-		goto out;
-	}
-#endif
-
-	b = kzalloc(sizeof(struct threshold_bank), GFP_KERNEL);
-	if (!b) {
-		err = -ENOMEM;
-		goto out;
-	}
-
-	kobject_set_name(&b->kobj, "threshold_bank%i", bank);
-	b->kobj.parent = &per_cpu(device_mce, cpu).kobj;
-#ifndef CONFIG_SMP
-	b->cpus = CPU_MASK_ALL;
-#else
-	b->cpus = cpu_core_map[cpu];
-#endif
-	err = kobject_register(&b->kobj);
-	if (err)
-		goto out_free;
-
-	per_cpu(threshold_banks, cpu)[bank] = b;
-
-	oldmask = affinity_set(cpu);
-	err = allocate_threshold_blocks(cpu, bank, 0,
-					MSR_IA32_MC0_MISC + bank * 4);
-	affinity_restore(oldmask);
-
-	if (err)
-		goto out_free;
-
-	for_each_cpu_mask(i, b->cpus) {
-		if (i == cpu)
-			continue;
-
-		err = sysfs_create_link(&per_cpu(device_mce, i).kobj,
-					&b->kobj, name);
-		if (err)
-			goto out;
-
-		per_cpu(threshold_banks, i)[bank] = b;
-	}
-
-	goto out;
-
-out_free:
-	per_cpu(threshold_banks, cpu)[bank] = NULL;
-	kfree(b);
-out:
-	return err;
-}
-
-/* create dir/files for all valid threshold banks */
-static __cpuinit int threshold_create_device(unsigned int cpu)
-{
-	unsigned int bank;
-	int err = 0;
-
-	for (bank = 0; bank < NR_BANKS; ++bank) {
-		if (!(per_cpu(bank_map, cpu) & 1 << bank))
-			continue;
-		err = threshold_create_bank(cpu, bank);
-		if (err)
-			goto out;
-	}
-out:
-	return err;
-}
-
-/*
- * let's be hotplug friendly.
- * in case of multiple core processors, the first core always takes ownership
- *   of shared sysfs dir/files, and rest of the cores will be symlinked to it.
- */
-
-static void deallocate_threshold_block(unsigned int cpu,
-						 unsigned int bank)
-{
-	struct threshold_block *pos = NULL;
-	struct threshold_block *tmp = NULL;
-	struct threshold_bank *head = per_cpu(threshold_banks, cpu)[bank];
-
-	if (!head)
-		return;
-
-	list_for_each_entry_safe(pos, tmp, &head->blocks->miscj, miscj) {
-		kobject_unregister(&pos->kobj);
-		list_del(&pos->miscj);
-		kfree(pos);
-	}
-
-	kfree(per_cpu(threshold_banks, cpu)[bank]->blocks);
-	per_cpu(threshold_banks, cpu)[bank]->blocks = NULL;
-}
-
-static void threshold_remove_bank(unsigned int cpu, int bank)
-{
-	int i = 0;
-	struct threshold_bank *b;
-	char name[32];
-
-	b = per_cpu(threshold_banks, cpu)[bank];
-
-	if (!b)
-		return;
-
-	if (!b->blocks)
-		goto free_out;
-
-	sprintf(name, "threshold_bank%i", bank);
-
-#ifdef CONFIG_SMP
-	/* sibling symlink */
-	if (shared_bank[bank] && b->blocks->cpu != cpu) {
-		sysfs_remove_link(&per_cpu(device_mce, cpu).kobj, name);
-		per_cpu(threshold_banks, cpu)[bank] = NULL;
-		return;
-	}
-#endif
-
-	/* remove all sibling symlinks before unregistering */
-	for_each_cpu_mask(i, b->cpus) {
-		if (i == cpu)
-			continue;
-
-		sysfs_remove_link(&per_cpu(device_mce, i).kobj, name);
-		per_cpu(threshold_banks, i)[bank] = NULL;
-	}
-
-	deallocate_threshold_block(cpu, bank);
-
-free_out:
-	kobject_unregister(&b->kobj);
-	kfree(b);
-	per_cpu(threshold_banks, cpu)[bank] = NULL;
-}
-
-static void threshold_remove_device(unsigned int cpu)
-{
-	unsigned int bank;
-
-	for (bank = 0; bank < NR_BANKS; ++bank) {
-		if (!(per_cpu(bank_map, cpu) & 1 << bank))
-			continue;
-		threshold_remove_bank(cpu, bank);
-	}
-}
-
-/* get notified when a cpu comes on/off */
-static int threshold_cpu_callback(struct notifier_block *nfb,
-					    unsigned long action, void *hcpu)
-{
-	/* cpu was unsigned int to begin with */
-	unsigned int cpu = (unsigned long)hcpu;
-
-	if (cpu >= NR_CPUS)
-		goto out;
-
-	switch (action) {
-	case CPU_ONLINE:
-	case CPU_ONLINE_FROZEN:
-		threshold_create_device(cpu);
-		break;
-	case CPU_DEAD:
-	case CPU_DEAD_FROZEN:
-		threshold_remove_device(cpu);
-		break;
-	default:
-		break;
-	}
-      out:
-	return NOTIFY_OK;
-}
-
-static struct notifier_block threshold_cpu_notifier = {
-	.notifier_call = threshold_cpu_callback,
-};
-
-static __init int threshold_init_device(void)
-{
-	unsigned lcpu = 0;
-
-	/* to hit CPUs online before the notifier is up */
-	for_each_online_cpu(lcpu) {
-		int err = threshold_create_device(lcpu);
-		if (err)
-			return err;
-	}
-	register_hotcpu_notifier(&threshold_cpu_notifier);
-	return 0;
-}
-
-device_initcall(threshold_init_device);
diff --git a/arch/x86_64/kernel/mce_intel_64.c b/arch/x86_64/kernel/mce_intel_64.c
deleted file mode 100644
index 6551505..0000000
--- a/arch/x86_64/kernel/mce_intel_64.c
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * Intel specific MCE features.
- * Copyright 2004 Zwane Mwaikambo <zwane@linuxpower.ca>
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/percpu.h>
-#include <asm/processor.h>
-#include <asm/msr.h>
-#include <asm/mce.h>
-#include <asm/hw_irq.h>
-#include <asm/idle.h>
-#include <asm/therm_throt.h>
-
-asmlinkage void smp_thermal_interrupt(void)
-{
-	__u64 msr_val;
-
-	ack_APIC_irq();
-
-	exit_idle();
-	irq_enter();
-
-	rdmsrl(MSR_IA32_THERM_STATUS, msr_val);
-	if (therm_throt_process(msr_val & 1))
-		mce_log_therm_throt_event(smp_processor_id(), msr_val);
-
-	irq_exit();
-}
-
-static void __cpuinit intel_init_thermal(struct cpuinfo_x86 *c)
-{
-	u32 l, h;
-	int tm2 = 0;
-	unsigned int cpu = smp_processor_id();
-
-	if (!cpu_has(c, X86_FEATURE_ACPI))
-		return;
-
-	if (!cpu_has(c, X86_FEATURE_ACC))
-		return;
-
-	/* first check if TM1 is already enabled by the BIOS, in which
-	 * case there might be some SMM goo which handles it, so we can't even
-	 * put a handler since it might be delivered via SMI already.
-	 */
-	rdmsr(MSR_IA32_MISC_ENABLE, l, h);
-	h = apic_read(APIC_LVTTHMR);
-	if ((l & (1 << 3)) && (h & APIC_DM_SMI)) {
-		printk(KERN_DEBUG
-		       "CPU%d: Thermal monitoring handled by SMI\n", cpu);
-		return;
-	}
-
-	if (cpu_has(c, X86_FEATURE_TM2) && (l & (1 << 13)))
-		tm2 = 1;
-
-	if (h & APIC_VECTOR_MASK) {
-		printk(KERN_DEBUG
-		       "CPU%d: Thermal LVT vector (%#x) already "
-		       "installed\n", cpu, (h & APIC_VECTOR_MASK));
-		return;
-	}
-
-	h = THERMAL_APIC_VECTOR;
-	h |= (APIC_DM_FIXED | APIC_LVT_MASKED);
-	apic_write(APIC_LVTTHMR, h);
-
-	rdmsr(MSR_IA32_THERM_INTERRUPT, l, h);
-	wrmsr(MSR_IA32_THERM_INTERRUPT, l | 0x03, h);
-
-	rdmsr(MSR_IA32_MISC_ENABLE, l, h);
-	wrmsr(MSR_IA32_MISC_ENABLE, l | (1 << 3), h);
-
-	l = apic_read(APIC_LVTTHMR);
-	apic_write(APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
-	printk(KERN_INFO "CPU%d: Thermal monitoring enabled (%s)\n",
-		cpu, tm2 ? "TM2" : "TM1");
-
-	/* enable thermal throttle processing */
-	atomic_set(&therm_throt_en, 1);
-	return;
-}
-
-void __cpuinit mce_intel_feature_init(struct cpuinfo_x86 *c)
-{
-	intel_init_thermal(c);
-}
diff --git a/arch/x86_64/kernel/module_64.c b/arch/x86_64/kernel/module_64.c
deleted file mode 100644
index a888e67..0000000
--- a/arch/x86_64/kernel/module_64.c
+++ /dev/null
@@ -1,185 +0,0 @@
-/*  Kernel module help for x86-64
-    Copyright (C) 2001 Rusty Russell.
-    Copyright (C) 2002,2003 Andi Kleen, SuSE Labs.
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-#include <linux/moduleloader.h>
-#include <linux/elf.h>
-#include <linux/vmalloc.h>
-#include <linux/fs.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/bug.h>
-
-#include <asm/system.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-
-#define DEBUGP(fmt...) 
-
-#ifndef CONFIG_UML
-void module_free(struct module *mod, void *module_region)
-{
-	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-           table entries. */
-}
-
-void *module_alloc(unsigned long size)
-{
-	struct vm_struct *area;
-
-	if (!size)
-		return NULL;
-	size = PAGE_ALIGN(size);
-	if (size > MODULES_LEN)
-		return NULL;
-
-	area = __get_vm_area(size, VM_ALLOC, MODULES_VADDR, MODULES_END);
-	if (!area)
-		return NULL;
-
-	return __vmalloc_area(area, GFP_KERNEL, PAGE_KERNEL_EXEC);
-}
-#endif
-
-/* We don't need anything special. */
-int module_frob_arch_sections(Elf_Ehdr *hdr,
-			      Elf_Shdr *sechdrs,
-			      char *secstrings,
-			      struct module *mod)
-{
-	return 0;
-}
-
-int apply_relocate_add(Elf64_Shdr *sechdrs,
-		   const char *strtab,
-		   unsigned int symindex,
-		   unsigned int relsec,
-		   struct module *me)
-{
-	unsigned int i;
-	Elf64_Rela *rel = (void *)sechdrs[relsec].sh_addr;
-	Elf64_Sym *sym;
-	void *loc;
-	u64 val; 
-
-	DEBUGP("Applying relocate section %u to %u\n", relsec,
-	       sechdrs[relsec].sh_info);
-	for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
-		/* This is where to make the change */
-		loc = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
-			+ rel[i].r_offset;
-
-		/* This is the symbol it is referring to.  Note that all
-		   undefined symbols have been resolved.  */
-		sym = (Elf64_Sym *)sechdrs[symindex].sh_addr
-			+ ELF64_R_SYM(rel[i].r_info);
-
-	        DEBUGP("type %d st_value %Lx r_addend %Lx loc %Lx\n",
-		       (int)ELF64_R_TYPE(rel[i].r_info), 
-		       sym->st_value, rel[i].r_addend, (u64)loc);
-
-		val = sym->st_value + rel[i].r_addend; 
-
-		switch (ELF64_R_TYPE(rel[i].r_info)) {
-		case R_X86_64_NONE:
-			break;
-		case R_X86_64_64:
-			*(u64 *)loc = val;
-			break;
-		case R_X86_64_32:
-			*(u32 *)loc = val;
-			if (val != *(u32 *)loc)
-				goto overflow;
-			break;
-		case R_X86_64_32S:
-			*(s32 *)loc = val;
-			if ((s64)val != *(s32 *)loc)
-				goto overflow;
-			break;
-		case R_X86_64_PC32: 
-			val -= (u64)loc;
-			*(u32 *)loc = val;
-#if 0
-			if ((s64)val != *(s32 *)loc)
-				goto overflow; 
-#endif
-			break;
-		default:
-			printk(KERN_ERR "module %s: Unknown rela relocation: %Lu\n",
-			       me->name, ELF64_R_TYPE(rel[i].r_info));
-			return -ENOEXEC;
-		}
-	}
-	return 0;
-
-overflow:
-	printk(KERN_ERR "overflow in relocation type %d val %Lx\n", 
-	       (int)ELF64_R_TYPE(rel[i].r_info), val);
-	printk(KERN_ERR "`%s' likely not compiled with -mcmodel=kernel\n",
-	       me->name);
-	return -ENOEXEC;
-}
-
-int apply_relocate(Elf_Shdr *sechdrs,
-		   const char *strtab,
-		   unsigned int symindex,
-		   unsigned int relsec,
-		   struct module *me)
-{
-	printk("non add relocation not supported\n");
-	return -ENOSYS;
-} 
-
-int module_finalize(const Elf_Ehdr *hdr,
-                    const Elf_Shdr *sechdrs,
-                    struct module *me)
-{
-	const Elf_Shdr *s, *text = NULL, *alt = NULL, *locks = NULL;
-	char *secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
-
-	for (s = sechdrs; s < sechdrs + hdr->e_shnum; s++) {
-		if (!strcmp(".text", secstrings + s->sh_name))
-			text = s;
-		if (!strcmp(".altinstructions", secstrings + s->sh_name))
-			alt = s;
-		if (!strcmp(".smp_locks", secstrings + s->sh_name))
-			locks= s;
-	}
-
-	if (alt) {
-		/* patch .altinstructions */
-		void *aseg = (void *)alt->sh_addr;
-		apply_alternatives(aseg, aseg + alt->sh_size);
-	}
-	if (locks && text) {
-		void *lseg = (void *)locks->sh_addr;
-		void *tseg = (void *)text->sh_addr;
-		alternatives_smp_module_add(me, me->name,
-					    lseg, lseg + locks->sh_size,
-					    tseg, tseg + text->sh_size);
-	}
-
-	return module_bug_finalize(hdr, sechdrs, me);
-}
-
-void module_arch_cleanup(struct module *mod)
-{
-	alternatives_smp_module_del(mod);
-	module_bug_cleanup(mod);
-}
diff --git a/arch/x86_64/kernel/mpparse_64.c b/arch/x86_64/kernel/mpparse_64.c
deleted file mode 100644
index 8bf0ca0..0000000
--- a/arch/x86_64/kernel/mpparse_64.c
+++ /dev/null
@@ -1,852 +0,0 @@
-/*
- *	Intel Multiprocessor Specification 1.1 and 1.4
- *	compliant MP-table parsing routines.
- *
- *	(c) 1995 Alan Cox, Building #3 <alan@redhat.com>
- *	(c) 1998, 1999, 2000 Ingo Molnar <mingo@redhat.com>
- *
- *	Fixes
- *		Erich Boleyn	:	MP v1.4 and additional changes.
- *		Alan Cox	:	Added EBDA scanning
- *		Ingo Molnar	:	various cleanups and rewrites
- *		Maciej W. Rozycki:	Bits for default MP configurations
- *		Paul Diefenbaugh:	Added full ACPI support
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/bootmem.h>
-#include <linux/kernel_stat.h>
-#include <linux/mc146818rtc.h>
-#include <linux/acpi.h>
-#include <linux/module.h>
-
-#include <asm/smp.h>
-#include <asm/mtrr.h>
-#include <asm/mpspec.h>
-#include <asm/pgalloc.h>
-#include <asm/io_apic.h>
-#include <asm/proto.h>
-#include <asm/acpi.h>
-
-/* Have we found an MP table */
-int smp_found_config;
-
-/*
- * Various Linux-internal data structures created from the
- * MP-table.
- */
-DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES);
-int mp_bus_id_to_pci_bus [MAX_MP_BUSSES] = { [0 ... MAX_MP_BUSSES-1] = -1 };
-
-static int mp_current_pci_id = 0;
-/* I/O APIC entries */
-struct mpc_config_ioapic mp_ioapics[MAX_IO_APICS];
-
-/* # of MP IRQ source entries */
-struct mpc_config_intsrc mp_irqs[MAX_IRQ_SOURCES];
-
-/* MP IRQ source entries */
-int mp_irq_entries;
-
-int nr_ioapics;
-unsigned long mp_lapic_addr = 0;
-
-
-
-/* Processor that is doing the boot up */
-unsigned int boot_cpu_id = -1U;
-/* Internal processor count */
-unsigned int num_processors __cpuinitdata = 0;
-
-unsigned disabled_cpus __cpuinitdata;
-
-/* Bitmask of physically existing CPUs */
-physid_mask_t phys_cpu_present_map = PHYSID_MASK_NONE;
-
-u8 bios_cpu_apicid[NR_CPUS] = { [0 ... NR_CPUS-1] = BAD_APICID };
-
-
-/*
- * Intel MP BIOS table parsing routines:
- */
-
-/*
- * Checksum an MP configuration block.
- */
-
-static int __init mpf_checksum(unsigned char *mp, int len)
-{
-	int sum = 0;
-
-	while (len--)
-		sum += *mp++;
-
-	return sum & 0xFF;
-}
-
-static void __cpuinit MP_processor_info (struct mpc_config_processor *m)
-{
-	int cpu;
-	cpumask_t tmp_map;
-	char *bootup_cpu = "";
-
-	if (!(m->mpc_cpuflag & CPU_ENABLED)) {
-		disabled_cpus++;
-		return;
-	}
-	if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) {
-		bootup_cpu = " (Bootup-CPU)";
-		boot_cpu_id = m->mpc_apicid;
-	}
-
-	printk(KERN_INFO "Processor #%d%s\n", m->mpc_apicid, bootup_cpu);
-
-	if (num_processors >= NR_CPUS) {
-		printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached."
-			" Processor ignored.\n", NR_CPUS);
-		return;
-	}
-
-	num_processors++;
-	cpus_complement(tmp_map, cpu_present_map);
-	cpu = first_cpu(tmp_map);
-
-	physid_set(m->mpc_apicid, phys_cpu_present_map);
- 	if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) {
- 		/*
- 		 * bios_cpu_apicid is required to have processors listed
- 		 * in same order as logical cpu numbers. Hence the first
- 		 * entry is BSP, and so on.
- 		 */
-		cpu = 0;
- 	}
-	bios_cpu_apicid[cpu] = m->mpc_apicid;
-	x86_cpu_to_apicid[cpu] = m->mpc_apicid;
-
-	cpu_set(cpu, cpu_possible_map);
-	cpu_set(cpu, cpu_present_map);
-}
-
-static void __init MP_bus_info (struct mpc_config_bus *m)
-{
-	char str[7];
-
-	memcpy(str, m->mpc_bustype, 6);
-	str[6] = 0;
-	Dprintk("Bus #%d is %s\n", m->mpc_busid, str);
-
-	if (strncmp(str, "ISA", 3) == 0) {
-		set_bit(m->mpc_busid, mp_bus_not_pci);
-	} else if (strncmp(str, "PCI", 3) == 0) {
-		clear_bit(m->mpc_busid, mp_bus_not_pci);
-		mp_bus_id_to_pci_bus[m->mpc_busid] = mp_current_pci_id;
-		mp_current_pci_id++;
-	} else {
-		printk(KERN_ERR "Unknown bustype %s\n", str);
-	}
-}
-
-static int bad_ioapic(unsigned long address)
-{
-	if (nr_ioapics >= MAX_IO_APICS) {
-		printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded "
-			"(found %d)\n", MAX_IO_APICS, nr_ioapics);
-		panic("Recompile kernel with bigger MAX_IO_APICS!\n");
-	}
-	if (!address) {
-		printk(KERN_ERR "WARNING: Bogus (zero) I/O APIC address"
-			" found in table, skipping!\n");
-		return 1;
-	}
-	return 0;
-}
-
-static void __init MP_ioapic_info (struct mpc_config_ioapic *m)
-{
-	if (!(m->mpc_flags & MPC_APIC_USABLE))
-		return;
-
-	printk("I/O APIC #%d at 0x%X.\n",
-		m->mpc_apicid, m->mpc_apicaddr);
-
-	if (bad_ioapic(m->mpc_apicaddr))
-		return;
-
-	mp_ioapics[nr_ioapics] = *m;
-	nr_ioapics++;
-}
-
-static void __init MP_intsrc_info (struct mpc_config_intsrc *m)
-{
-	mp_irqs [mp_irq_entries] = *m;
-	Dprintk("Int: type %d, pol %d, trig %d, bus %d,"
-		" IRQ %02x, APIC ID %x, APIC INT %02x\n",
-			m->mpc_irqtype, m->mpc_irqflag & 3,
-			(m->mpc_irqflag >> 2) & 3, m->mpc_srcbus,
-			m->mpc_srcbusirq, m->mpc_dstapic, m->mpc_dstirq);
-	if (++mp_irq_entries >= MAX_IRQ_SOURCES)
-		panic("Max # of irq sources exceeded!!\n");
-}
-
-static void __init MP_lintsrc_info (struct mpc_config_lintsrc *m)
-{
-	Dprintk("Lint: type %d, pol %d, trig %d, bus %d,"
-		" IRQ %02x, APIC ID %x, APIC LINT %02x\n",
-			m->mpc_irqtype, m->mpc_irqflag & 3,
-			(m->mpc_irqflag >> 2) &3, m->mpc_srcbusid,
-			m->mpc_srcbusirq, m->mpc_destapic, m->mpc_destapiclint);
-}
-
-/*
- * Read/parse the MPC
- */
-
-static int __init smp_read_mpc(struct mp_config_table *mpc)
-{
-	char str[16];
-	int count=sizeof(*mpc);
-	unsigned char *mpt=((unsigned char *)mpc)+count;
-
-	if (memcmp(mpc->mpc_signature,MPC_SIGNATURE,4)) {
-		printk("MPTABLE: bad signature [%c%c%c%c]!\n",
-			mpc->mpc_signature[0],
-			mpc->mpc_signature[1],
-			mpc->mpc_signature[2],
-			mpc->mpc_signature[3]);
-		return 0;
-	}
-	if (mpf_checksum((unsigned char *)mpc,mpc->mpc_length)) {
-		printk("MPTABLE: checksum error!\n");
-		return 0;
-	}
-	if (mpc->mpc_spec!=0x01 && mpc->mpc_spec!=0x04) {
-		printk(KERN_ERR "MPTABLE: bad table version (%d)!!\n",
-			mpc->mpc_spec);
-		return 0;
-	}
-	if (!mpc->mpc_lapic) {
-		printk(KERN_ERR "MPTABLE: null local APIC address!\n");
-		return 0;
-	}
-	memcpy(str,mpc->mpc_oem,8);
-	str[8] = 0;
-	printk(KERN_INFO "MPTABLE: OEM ID: %s ",str);
-
-	memcpy(str,mpc->mpc_productid,12);
-	str[12] = 0;
-	printk("MPTABLE: Product ID: %s ",str);
-
-	printk("MPTABLE: APIC at: 0x%X\n",mpc->mpc_lapic);
-
-	/* save the local APIC address, it might be non-default */
-	if (!acpi_lapic)
-		mp_lapic_addr = mpc->mpc_lapic;
-
-	/*
-	 *	Now process the configuration blocks.
-	 */
-	while (count < mpc->mpc_length) {
-		switch(*mpt) {
-			case MP_PROCESSOR:
-			{
-				struct mpc_config_processor *m=
-					(struct mpc_config_processor *)mpt;
-				if (!acpi_lapic)
-					MP_processor_info(m);
-				mpt += sizeof(*m);
-				count += sizeof(*m);
-				break;
-			}
-			case MP_BUS:
-			{
-				struct mpc_config_bus *m=
-					(struct mpc_config_bus *)mpt;
-				MP_bus_info(m);
-				mpt += sizeof(*m);
-				count += sizeof(*m);
-				break;
-			}
-			case MP_IOAPIC:
-			{
-				struct mpc_config_ioapic *m=
-					(struct mpc_config_ioapic *)mpt;
-				MP_ioapic_info(m);
-				mpt += sizeof(*m);
-				count += sizeof(*m);
-				break;
-			}
-			case MP_INTSRC:
-			{
-				struct mpc_config_intsrc *m=
-					(struct mpc_config_intsrc *)mpt;
-
-				MP_intsrc_info(m);
-				mpt += sizeof(*m);
-				count += sizeof(*m);
-				break;
-			}
-			case MP_LINTSRC:
-			{
-				struct mpc_config_lintsrc *m=
-					(struct mpc_config_lintsrc *)mpt;
-				MP_lintsrc_info(m);
-				mpt += sizeof(*m);
-				count += sizeof(*m);
-				break;
-			}
-		}
-	}
-	setup_apic_routing();
-	if (!num_processors)
-		printk(KERN_ERR "MPTABLE: no processors registered!\n");
-	return num_processors;
-}
-
-static int __init ELCR_trigger(unsigned int irq)
-{
-	unsigned int port;
-
-	port = 0x4d0 + (irq >> 3);
-	return (inb(port) >> (irq & 7)) & 1;
-}
-
-static void __init construct_default_ioirq_mptable(int mpc_default_type)
-{
-	struct mpc_config_intsrc intsrc;
-	int i;
-	int ELCR_fallback = 0;
-
-	intsrc.mpc_type = MP_INTSRC;
-	intsrc.mpc_irqflag = 0;			/* conforming */
-	intsrc.mpc_srcbus = 0;
-	intsrc.mpc_dstapic = mp_ioapics[0].mpc_apicid;
-
-	intsrc.mpc_irqtype = mp_INT;
-
-	/*
-	 *  If true, we have an ISA/PCI system with no IRQ entries
-	 *  in the MP table. To prevent the PCI interrupts from being set up
-	 *  incorrectly, we try to use the ELCR. The sanity check to see if
-	 *  there is good ELCR data is very simple - IRQ0, 1, 2 and 13 can
-	 *  never be level sensitive, so we simply see if the ELCR agrees.
-	 *  If it does, we assume it's valid.
-	 */
-	if (mpc_default_type == 5) {
-		printk(KERN_INFO "ISA/PCI bus type with no IRQ information... falling back to ELCR\n");
-
-		if (ELCR_trigger(0) || ELCR_trigger(1) || ELCR_trigger(2) || ELCR_trigger(13))
-			printk(KERN_ERR "ELCR contains invalid data... not using ELCR\n");
-		else {
-			printk(KERN_INFO "Using ELCR to identify PCI interrupts\n");
-			ELCR_fallback = 1;
-		}
-	}
-
-	for (i = 0; i < 16; i++) {
-		switch (mpc_default_type) {
-		case 2:
-			if (i == 0 || i == 13)
-				continue;	/* IRQ0 & IRQ13 not connected */
-			/* fall through */
-		default:
-			if (i == 2)
-				continue;	/* IRQ2 is never connected */
-		}
-
-		if (ELCR_fallback) {
-			/*
-			 *  If the ELCR indicates a level-sensitive interrupt, we
-			 *  copy that information over to the MP table in the
-			 *  irqflag field (level sensitive, active high polarity).
-			 */
-			if (ELCR_trigger(i))
-				intsrc.mpc_irqflag = 13;
-			else
-				intsrc.mpc_irqflag = 0;
-		}
-
-		intsrc.mpc_srcbusirq = i;
-		intsrc.mpc_dstirq = i ? i : 2;		/* IRQ0 to INTIN2 */
-		MP_intsrc_info(&intsrc);
-	}
-
-	intsrc.mpc_irqtype = mp_ExtINT;
-	intsrc.mpc_srcbusirq = 0;
-	intsrc.mpc_dstirq = 0;				/* 8259A to INTIN0 */
-	MP_intsrc_info(&intsrc);
-}
-
-static inline void __init construct_default_ISA_mptable(int mpc_default_type)
-{
-	struct mpc_config_processor processor;
-	struct mpc_config_bus bus;
-	struct mpc_config_ioapic ioapic;
-	struct mpc_config_lintsrc lintsrc;
-	int linttypes[2] = { mp_ExtINT, mp_NMI };
-	int i;
-
-	/*
-	 * local APIC has default address
-	 */
-	mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
-
-	/*
-	 * 2 CPUs, numbered 0 & 1.
-	 */
-	processor.mpc_type = MP_PROCESSOR;
-	processor.mpc_apicver = 0;
-	processor.mpc_cpuflag = CPU_ENABLED;
-	processor.mpc_cpufeature = 0;
-	processor.mpc_featureflag = 0;
-	processor.mpc_reserved[0] = 0;
-	processor.mpc_reserved[1] = 0;
-	for (i = 0; i < 2; i++) {
-		processor.mpc_apicid = i;
-		MP_processor_info(&processor);
-	}
-
-	bus.mpc_type = MP_BUS;
-	bus.mpc_busid = 0;
-	switch (mpc_default_type) {
-		default:
-			printk(KERN_ERR "???\nUnknown standard configuration %d\n",
-				mpc_default_type);
-			/* fall through */
-		case 1:
-		case 5:
-			memcpy(bus.mpc_bustype, "ISA   ", 6);
-			break;
-	}
-	MP_bus_info(&bus);
-	if (mpc_default_type > 4) {
-		bus.mpc_busid = 1;
-		memcpy(bus.mpc_bustype, "PCI   ", 6);
-		MP_bus_info(&bus);
-	}
-
-	ioapic.mpc_type = MP_IOAPIC;
-	ioapic.mpc_apicid = 2;
-	ioapic.mpc_apicver = 0;
-	ioapic.mpc_flags = MPC_APIC_USABLE;
-	ioapic.mpc_apicaddr = 0xFEC00000;
-	MP_ioapic_info(&ioapic);
-
-	/*
-	 * We set up most of the low 16 IO-APIC pins according to MPS rules.
-	 */
-	construct_default_ioirq_mptable(mpc_default_type);
-
-	lintsrc.mpc_type = MP_LINTSRC;
-	lintsrc.mpc_irqflag = 0;		/* conforming */
-	lintsrc.mpc_srcbusid = 0;
-	lintsrc.mpc_srcbusirq = 0;
-	lintsrc.mpc_destapic = MP_APIC_ALL;
-	for (i = 0; i < 2; i++) {
-		lintsrc.mpc_irqtype = linttypes[i];
-		lintsrc.mpc_destapiclint = i;
-		MP_lintsrc_info(&lintsrc);
-	}
-}
-
-static struct intel_mp_floating *mpf_found;
-
-/*
- * Scan the memory blocks for an SMP configuration block.
- */
-void __init get_smp_config (void)
-{
-	struct intel_mp_floating *mpf = mpf_found;
-
-	/*
- 	 * ACPI supports both logical (e.g. Hyper-Threading) and physical 
- 	 * processors, where MPS only supports physical.
- 	 */
- 	if (acpi_lapic && acpi_ioapic) {
- 		printk(KERN_INFO "Using ACPI (MADT) for SMP configuration information\n");
- 		return;
-	}
- 	else if (acpi_lapic)
- 		printk(KERN_INFO "Using ACPI for processor (LAPIC) configuration information\n");
-
-	printk("Intel MultiProcessor Specification v1.%d\n", mpf->mpf_specification);
-
-	/*
-	 * Now see if we need to read further.
-	 */
-	if (mpf->mpf_feature1 != 0) {
-
-		printk(KERN_INFO "Default MP configuration #%d\n", mpf->mpf_feature1);
-		construct_default_ISA_mptable(mpf->mpf_feature1);
-
-	} else if (mpf->mpf_physptr) {
-
-		/*
-		 * Read the physical hardware table.  Anything here will
-		 * override the defaults.
-		 */
-		if (!smp_read_mpc(phys_to_virt(mpf->mpf_physptr))) {
-			smp_found_config = 0;
-			printk(KERN_ERR "BIOS bug, MP table errors detected!...\n");
-			printk(KERN_ERR "... disabling SMP support. (tell your hw vendor)\n");
-			return;
-		}
-		/*
-		 * If there are no explicit MP IRQ entries, then we are
-		 * broken.  We set up most of the low 16 IO-APIC pins to
-		 * ISA defaults and hope it will work.
-		 */
-		if (!mp_irq_entries) {
-			struct mpc_config_bus bus;
-
-			printk(KERN_ERR "BIOS bug, no explicit IRQ entries, using default mptable. (tell your hw vendor)\n");
-
-			bus.mpc_type = MP_BUS;
-			bus.mpc_busid = 0;
-			memcpy(bus.mpc_bustype, "ISA   ", 6);
-			MP_bus_info(&bus);
-
-			construct_default_ioirq_mptable(0);
-		}
-
-	} else
-		BUG();
-
-	printk(KERN_INFO "Processors: %d\n", num_processors);
-	/*
-	 * Only use the first configuration found.
-	 */
-}
-
-static int __init smp_scan_config (unsigned long base, unsigned long length)
-{
-	extern void __bad_mpf_size(void); 
-	unsigned int *bp = phys_to_virt(base);
-	struct intel_mp_floating *mpf;
-
-	Dprintk("Scan SMP from %p for %ld bytes.\n", bp,length);
-	if (sizeof(*mpf) != 16)
-		__bad_mpf_size();
-
-	while (length > 0) {
-		mpf = (struct intel_mp_floating *)bp;
-		if ((*bp == SMP_MAGIC_IDENT) &&
-			(mpf->mpf_length == 1) &&
-			!mpf_checksum((unsigned char *)bp, 16) &&
-			((mpf->mpf_specification == 1)
-				|| (mpf->mpf_specification == 4)) ) {
-
-			smp_found_config = 1;
-			reserve_bootmem_generic(virt_to_phys(mpf), PAGE_SIZE);
-			if (mpf->mpf_physptr)
-				reserve_bootmem_generic(mpf->mpf_physptr, PAGE_SIZE);
-			mpf_found = mpf;
-			return 1;
-		}
-		bp += 4;
-		length -= 16;
-	}
-	return 0;
-}
-
-void __init find_smp_config(void)
-{
-	unsigned int address;
-
-	/*
-	 * FIXME: Linux assumes you have 640K of base ram..
-	 * this continues the error...
-	 *
-	 * 1) Scan the bottom 1K for a signature
-	 * 2) Scan the top 1K of base RAM
-	 * 3) Scan the 64K of bios
-	 */
-	if (smp_scan_config(0x0,0x400) ||
-		smp_scan_config(639*0x400,0x400) ||
-			smp_scan_config(0xF0000,0x10000))
-		return;
-	/*
-	 * If it is an SMP machine we should know now.
-	 *
-	 * there is a real-mode segmented pointer pointing to the
-	 * 4K EBDA area at 0x40E, calculate and scan it here.
-	 *
-	 * NOTE! There are Linux loaders that will corrupt the EBDA
-	 * area, and as such this kind of SMP config may be less
-	 * trustworthy, simply because the SMP table may have been
-	 * stomped on during early boot. These loaders are buggy and
-	 * should be fixed.
-	 */
-
-	address = *(unsigned short *)phys_to_virt(0x40E);
-	address <<= 4;
-	if (smp_scan_config(address, 0x1000))
-		return;
-
-	/* If we have come this far, we did not find an MP table  */
-	 printk(KERN_INFO "No mptable found.\n");
-}
-
-/* --------------------------------------------------------------------------
-                            ACPI-based MP Configuration
-   -------------------------------------------------------------------------- */
-
-#ifdef CONFIG_ACPI
-
-void __init mp_register_lapic_address(u64 address)
-{
-	mp_lapic_addr = (unsigned long) address;
-	set_fixmap_nocache(FIX_APIC_BASE, mp_lapic_addr);
-	if (boot_cpu_id == -1U)
-		boot_cpu_id = GET_APIC_ID(apic_read(APIC_ID));
-}
-
-void __cpuinit mp_register_lapic (u8 id, u8 enabled)
-{
-	struct mpc_config_processor processor;
-	int			boot_cpu = 0;
-	
-	if (id == boot_cpu_id)
-		boot_cpu = 1;
-
-	processor.mpc_type = MP_PROCESSOR;
-	processor.mpc_apicid = id;
-	processor.mpc_apicver = 0;
-	processor.mpc_cpuflag = (enabled ? CPU_ENABLED : 0);
-	processor.mpc_cpuflag |= (boot_cpu ? CPU_BOOTPROCESSOR : 0);
-	processor.mpc_cpufeature = 0;
-	processor.mpc_featureflag = 0;
-	processor.mpc_reserved[0] = 0;
-	processor.mpc_reserved[1] = 0;
-
-	MP_processor_info(&processor);
-}
-
-#define MP_ISA_BUS		0
-#define MP_MAX_IOAPIC_PIN	127
-
-static struct mp_ioapic_routing {
-	int			apic_id;
-	int			gsi_start;
-	int			gsi_end;
-	u32			pin_programmed[4];
-} mp_ioapic_routing[MAX_IO_APICS];
-
-static int mp_find_ioapic(int gsi)
-{
-	int i = 0;
-
-	/* Find the IOAPIC that manages this GSI. */
-	for (i = 0; i < nr_ioapics; i++) {
-		if ((gsi >= mp_ioapic_routing[i].gsi_start)
-			&& (gsi <= mp_ioapic_routing[i].gsi_end))
-			return i;
-	}
-
-	printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi);
-	return -1;
-}
-
-static u8 uniq_ioapic_id(u8 id)
-{
-	int i;
-	DECLARE_BITMAP(used, 256);
-	bitmap_zero(used, 256);
-	for (i = 0; i < nr_ioapics; i++) {
-		struct mpc_config_ioapic *ia = &mp_ioapics[i];
-		__set_bit(ia->mpc_apicid, used);
-	}
-	if (!test_bit(id, used))
-		return id;
-	return find_first_zero_bit(used, 256);
-}
-
-void __init mp_register_ioapic(u8 id, u32 address, u32 gsi_base)
-{
-	int idx = 0;
-
-	if (bad_ioapic(address))
-		return;
-
-	idx = nr_ioapics;
-
-	mp_ioapics[idx].mpc_type = MP_IOAPIC;
-	mp_ioapics[idx].mpc_flags = MPC_APIC_USABLE;
-	mp_ioapics[idx].mpc_apicaddr = address;
-
-	set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
-	mp_ioapics[idx].mpc_apicid = uniq_ioapic_id(id);
-	mp_ioapics[idx].mpc_apicver = 0;
-	
-	/* 
-	 * Build basic IRQ lookup table to facilitate gsi->io_apic lookups
-	 * and to prevent reprogramming of IOAPIC pins (PCI IRQs).
-	 */
-	mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].mpc_apicid;
-	mp_ioapic_routing[idx].gsi_start = gsi_base;
-	mp_ioapic_routing[idx].gsi_end = gsi_base + 
-		io_apic_get_redir_entries(idx);
-
-	printk(KERN_INFO "IOAPIC[%d]: apic_id %d, address 0x%x, "
-		"GSI %d-%d\n", idx, mp_ioapics[idx].mpc_apicid, 
-		mp_ioapics[idx].mpc_apicaddr,
-		mp_ioapic_routing[idx].gsi_start,
-		mp_ioapic_routing[idx].gsi_end);
-
-	nr_ioapics++;
-}
-
-void __init
-mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32	gsi)
-{
-	struct mpc_config_intsrc intsrc;
-	int			ioapic = -1;
-	int			pin = -1;
-
-	/* 
-	 * Convert 'gsi' to 'ioapic.pin'.
-	 */
-	ioapic = mp_find_ioapic(gsi);
-	if (ioapic < 0)
-		return;
-	pin = gsi - mp_ioapic_routing[ioapic].gsi_start;
-
-	/*
-	 * TBD: This check is for faulty timer entries, where the override
-	 *      erroneously sets the trigger to level, resulting in a HUGE 
-	 *      increase of timer interrupts!
-	 */
-	if ((bus_irq == 0) && (trigger == 3))
-		trigger = 1;
-
-	intsrc.mpc_type = MP_INTSRC;
-	intsrc.mpc_irqtype = mp_INT;
-	intsrc.mpc_irqflag = (trigger << 2) | polarity;
-	intsrc.mpc_srcbus = MP_ISA_BUS;
-	intsrc.mpc_srcbusirq = bus_irq;				       /* IRQ */
-	intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid;	   /* APIC ID */
-	intsrc.mpc_dstirq = pin;				    /* INTIN# */
-
-	Dprintk("Int: type %d, pol %d, trig %d, bus %d, irq %d, %d-%d\n", 
-		intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3, 
-		(intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus, 
-		intsrc.mpc_srcbusirq, intsrc.mpc_dstapic, intsrc.mpc_dstirq);
-
-	mp_irqs[mp_irq_entries] = intsrc;
-	if (++mp_irq_entries == MAX_IRQ_SOURCES)
-		panic("Max # of irq sources exceeded!\n");
-}
-
-void __init mp_config_acpi_legacy_irqs(void)
-{
-	struct mpc_config_intsrc intsrc;
-	int i = 0;
-	int ioapic = -1;
-
-	/* 
-	 * Fabricate the legacy ISA bus (bus #31).
-	 */
-	set_bit(MP_ISA_BUS, mp_bus_not_pci);
-
-	/* 
-	 * Locate the IOAPIC that manages the ISA IRQs (0-15). 
-	 */
-	ioapic = mp_find_ioapic(0);
-	if (ioapic < 0)
-		return;
-
-	intsrc.mpc_type = MP_INTSRC;
-	intsrc.mpc_irqflag = 0;					/* Conforming */
-	intsrc.mpc_srcbus = MP_ISA_BUS;
-	intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid;
-
-	/* 
-	 * Use the default configuration for the IRQs 0-15.  Unless
-	 * overridden by (MADT) interrupt source override entries.
-	 */
-	for (i = 0; i < 16; i++) {
-		int idx;
-
-		for (idx = 0; idx < mp_irq_entries; idx++) {
-			struct mpc_config_intsrc *irq = mp_irqs + idx;
-
-			/* Do we already have a mapping for this ISA IRQ? */
-			if (irq->mpc_srcbus == MP_ISA_BUS && irq->mpc_srcbusirq == i)
-				break;
-
-			/* Do we already have a mapping for this IOAPIC pin */
-			if ((irq->mpc_dstapic == intsrc.mpc_dstapic) &&
-				(irq->mpc_dstirq == i))
-				break;
-		}
-
-		if (idx != mp_irq_entries) {
-			printk(KERN_DEBUG "ACPI: IRQ%d used by override.\n", i);
-			continue;			/* IRQ already used */
-		}
-
-		intsrc.mpc_irqtype = mp_INT;
-		intsrc.mpc_srcbusirq = i;		   /* Identity mapped */
-		intsrc.mpc_dstirq = i;
-
-		Dprintk("Int: type %d, pol %d, trig %d, bus %d, irq %d, "
-			"%d-%d\n", intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3, 
-			(intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus, 
-			intsrc.mpc_srcbusirq, intsrc.mpc_dstapic, 
-			intsrc.mpc_dstirq);
-
-		mp_irqs[mp_irq_entries] = intsrc;
-		if (++mp_irq_entries == MAX_IRQ_SOURCES)
-			panic("Max # of irq sources exceeded!\n");
-	}
-}
-
-int mp_register_gsi(u32 gsi, int triggering, int polarity)
-{
-	int ioapic = -1;
-	int ioapic_pin = 0;
-	int idx, bit = 0;
-
-	if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
-		return gsi;
-
-	/* Don't set up the ACPI SCI because it's already set up */
-	if (acpi_gbl_FADT.sci_interrupt == gsi)
-		return gsi;
-
-	ioapic = mp_find_ioapic(gsi);
-	if (ioapic < 0) {
-		printk(KERN_WARNING "No IOAPIC for GSI %u\n", gsi);
-		return gsi;
-	}
-
-	ioapic_pin = gsi - mp_ioapic_routing[ioapic].gsi_start;
-
-	/* 
-	 * Avoid pin reprogramming.  PRTs typically include entries  
-	 * with redundant pin->gsi mappings (but unique PCI devices);
-	 * we only program the IOAPIC on the first.
-	 */
-	bit = ioapic_pin % 32;
-	idx = (ioapic_pin < 32) ? 0 : (ioapic_pin / 32);
-	if (idx > 3) {
-		printk(KERN_ERR "Invalid reference to IOAPIC pin "
-			"%d-%d\n", mp_ioapic_routing[ioapic].apic_id, 
-			ioapic_pin);
-		return gsi;
-	}
-	if ((1<<bit) & mp_ioapic_routing[ioapic].pin_programmed[idx]) {
-		Dprintk(KERN_DEBUG "Pin %d-%d already programmed\n",
-			mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
-		return gsi;
-	}
-
-	mp_ioapic_routing[ioapic].pin_programmed[idx] |= (1<<bit);
-
-	io_apic_set_pci_routing(ioapic, ioapic_pin, gsi,
-		triggering == ACPI_EDGE_SENSITIVE ? 0 : 1,
-		polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
-	return gsi;
-}
-#endif /*CONFIG_ACPI*/
diff --git a/arch/x86_64/kernel/nmi_64.c b/arch/x86_64/kernel/nmi_64.c
deleted file mode 100644
index 0ec6d2d..0000000
--- a/arch/x86_64/kernel/nmi_64.c
+++ /dev/null
@@ -1,483 +0,0 @@
-/*
- *  linux/arch/x86_64/nmi.c
- *
- *  NMI watchdog support on APIC systems
- *
- *  Started by Ingo Molnar <mingo@redhat.com>
- *
- *  Fixes:
- *  Mikael Pettersson	: AMD K7 support for local APIC NMI watchdog.
- *  Mikael Pettersson	: Power Management for local APIC NMI watchdog.
- *  Pavel Machek and
- *  Mikael Pettersson	: PM converted to driver model. Disable/enable API.
- */
-
-#include <linux/nmi.h>
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/sysdev.h>
-#include <linux/sysctl.h>
-#include <linux/kprobes.h>
-#include <linux/cpumask.h>
-#include <linux/kdebug.h>
-
-#include <asm/smp.h>
-#include <asm/nmi.h>
-#include <asm/proto.h>
-#include <asm/mce.h>
-
-int unknown_nmi_panic;
-int nmi_watchdog_enabled;
-int panic_on_unrecovered_nmi;
-
-static cpumask_t backtrace_mask = CPU_MASK_NONE;
-
-/* nmi_active:
- * >0: the lapic NMI watchdog is active, but can be disabled
- * <0: the lapic NMI watchdog has not been set up, and cannot
- *     be enabled
- *  0: the lapic NMI watchdog is disabled, but can be enabled
- */
-atomic_t nmi_active = ATOMIC_INIT(0);		/* oprofile uses this */
-int panic_on_timeout;
-
-unsigned int nmi_watchdog = NMI_DEFAULT;
-static unsigned int nmi_hz = HZ;
-
-static DEFINE_PER_CPU(short, wd_enabled);
-
-/* local prototypes */
-static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu);
-
-/* Run after command line and cpu_init init, but before all other checks */
-void nmi_watchdog_default(void)
-{
-	if (nmi_watchdog != NMI_DEFAULT)
-		return;
-	nmi_watchdog = NMI_NONE;
-}
-
-static int endflag __initdata = 0;
-
-#ifdef CONFIG_SMP
-/* The performance counters used by NMI_LOCAL_APIC don't trigger when
- * the CPU is idle. To make sure the NMI watchdog really ticks on all
- * CPUs during the test make them busy.
- */
-static __init void nmi_cpu_busy(void *data)
-{
-	local_irq_enable_in_hardirq();
-	/* Intentionally don't use cpu_relax here. This is
-	   to make sure that the performance counter really ticks,
-	   even if there is a simulator or similar that catches the
-	   pause instruction. On a real HT machine this is fine because
-	   all other CPUs are busy with "useless" delay loops and don't
-	   care if they get somewhat less cycles. */
-	while (endflag == 0)
-		mb();
-}
-#endif
-
-int __init check_nmi_watchdog (void)
-{
-	int *counts;
-	int cpu;
-
-	if ((nmi_watchdog == NMI_NONE) || (nmi_watchdog == NMI_DISABLED)) 
-		return 0;
-
-	if (!atomic_read(&nmi_active))
-		return 0;
-
-	counts = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL);
-	if (!counts)
-		return -1;
-
-	printk(KERN_INFO "testing NMI watchdog ... ");
-
-#ifdef CONFIG_SMP
-	if (nmi_watchdog == NMI_LOCAL_APIC)
-		smp_call_function(nmi_cpu_busy, (void *)&endflag, 0, 0);
-#endif
-
-	for (cpu = 0; cpu < NR_CPUS; cpu++)
-		counts[cpu] = cpu_pda(cpu)->__nmi_count;
-	local_irq_enable();
-	mdelay((20*1000)/nmi_hz); // wait 20 ticks
-
-	for_each_online_cpu(cpu) {
-		if (!per_cpu(wd_enabled, cpu))
-			continue;
-		if (cpu_pda(cpu)->__nmi_count - counts[cpu] <= 5) {
-			printk("CPU#%d: NMI appears to be stuck (%d->%d)!\n",
-			       cpu,
-			       counts[cpu],
-			       cpu_pda(cpu)->__nmi_count);
-			per_cpu(wd_enabled, cpu) = 0;
-			atomic_dec(&nmi_active);
-		}
-	}
-	if (!atomic_read(&nmi_active)) {
-		kfree(counts);
-		atomic_set(&nmi_active, -1);
-		endflag = 1;
-		return -1;
-	}
-	endflag = 1;
-	printk("OK.\n");
-
-	/* now that we know it works we can reduce NMI frequency to
-	   something more reasonable; makes a difference in some configs */
-	if (nmi_watchdog == NMI_LOCAL_APIC)
-		nmi_hz = lapic_adjust_nmi_hz(1);
-
-	kfree(counts);
-	return 0;
-}
-
-int __init setup_nmi_watchdog(char *str)
-{
-	int nmi;
-
-	if (!strncmp(str,"panic",5)) {
-		panic_on_timeout = 1;
-		str = strchr(str, ',');
-		if (!str)
-			return 1;
-		++str;
-	}
-
-	get_option(&str, &nmi);
-
-	if ((nmi >= NMI_INVALID) || (nmi < NMI_NONE))
-		return 0;
-
-	nmi_watchdog = nmi;
-	return 1;
-}
-
-__setup("nmi_watchdog=", setup_nmi_watchdog);
-
-
-static void __acpi_nmi_disable(void *__unused)
-{
-	apic_write(APIC_LVT0, APIC_DM_NMI | APIC_LVT_MASKED);
-}
-
-/*
- * Disable timer based NMIs on all CPUs:
- */
-void acpi_nmi_disable(void)
-{
-	if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC)
-		on_each_cpu(__acpi_nmi_disable, NULL, 0, 1);
-}
-
-static void __acpi_nmi_enable(void *__unused)
-{
-	apic_write(APIC_LVT0, APIC_DM_NMI);
-}
-
-/*
- * Enable timer based NMIs on all CPUs:
- */
-void acpi_nmi_enable(void)
-{
-	if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC)
-		on_each_cpu(__acpi_nmi_enable, NULL, 0, 1);
-}
-#ifdef CONFIG_PM
-
-static int nmi_pm_active; /* nmi_active before suspend */
-
-static int lapic_nmi_suspend(struct sys_device *dev, pm_message_t state)
-{
-	/* only CPU0 goes here, other CPUs should be offline */
-	nmi_pm_active = atomic_read(&nmi_active);
-	stop_apic_nmi_watchdog(NULL);
-	BUG_ON(atomic_read(&nmi_active) != 0);
-	return 0;
-}
-
-static int lapic_nmi_resume(struct sys_device *dev)
-{
-	/* only CPU0 goes here, other CPUs should be offline */
-	if (nmi_pm_active > 0) {
-		setup_apic_nmi_watchdog(NULL);
-		touch_nmi_watchdog();
-	}
-	return 0;
-}
-
-static struct sysdev_class nmi_sysclass = {
-	set_kset_name("lapic_nmi"),
-	.resume		= lapic_nmi_resume,
-	.suspend	= lapic_nmi_suspend,
-};
-
-static struct sys_device device_lapic_nmi = {
-	.id		= 0,
-	.cls	= &nmi_sysclass,
-};
-
-static int __init init_lapic_nmi_sysfs(void)
-{
-	int error;
-
-	/* should really be a BUG_ON but b/c this is an
-	 * init call, it just doesn't work.  -dcz
-	 */
-	if (nmi_watchdog != NMI_LOCAL_APIC)
-		return 0;
-
-	if ( atomic_read(&nmi_active) < 0 )
-		return 0;
-
-	error = sysdev_class_register(&nmi_sysclass);
-	if (!error)
-		error = sysdev_register(&device_lapic_nmi);
-	return error;
-}
-/* must come after the local APIC's device_initcall() */
-late_initcall(init_lapic_nmi_sysfs);
-
-#endif	/* CONFIG_PM */
-
-void setup_apic_nmi_watchdog(void *unused)
-{
-	if (__get_cpu_var(wd_enabled) == 1)
-		return;
-
-	/* cheap hack to support suspend/resume */
-	/* if cpu0 is not active neither should the other cpus */
-	if ((smp_processor_id() != 0) && (atomic_read(&nmi_active) <= 0))
-		return;
-
-	switch (nmi_watchdog) {
-	case NMI_LOCAL_APIC:
-		__get_cpu_var(wd_enabled) = 1;
-		if (lapic_watchdog_init(nmi_hz) < 0) {
-			__get_cpu_var(wd_enabled) = 0;
-			return;
-		}
-		/* FALL THROUGH */
-	case NMI_IO_APIC:
-		__get_cpu_var(wd_enabled) = 1;
-		atomic_inc(&nmi_active);
-	}
-}
-
-void stop_apic_nmi_watchdog(void *unused)
-{
-	/* only support LOCAL and IO APICs for now */
-	if ((nmi_watchdog != NMI_LOCAL_APIC) &&
-	    (nmi_watchdog != NMI_IO_APIC))
-	    	return;
-	if (__get_cpu_var(wd_enabled) == 0)
-		return;
-	if (nmi_watchdog == NMI_LOCAL_APIC)
-		lapic_watchdog_stop();
-	__get_cpu_var(wd_enabled) = 0;
-	atomic_dec(&nmi_active);
-}
-
-/*
- * the best way to detect whether a CPU has a 'hard lockup' problem
- * is to check it's local APIC timer IRQ counts. If they are not
- * changing then that CPU has some problem.
- *
- * as these watchdog NMI IRQs are generated on every CPU, we only
- * have to check the current processor.
- */
-
-static DEFINE_PER_CPU(unsigned, last_irq_sum);
-static DEFINE_PER_CPU(local_t, alert_counter);
-static DEFINE_PER_CPU(int, nmi_touch);
-
-void touch_nmi_watchdog(void)
-{
-	if (nmi_watchdog > 0) {
-		unsigned cpu;
-
-		/*
- 		 * Tell other CPUs to reset their alert counters. We cannot
-		 * do it ourselves because the alert count increase is not
-		 * atomic.
-		 */
-		for_each_present_cpu(cpu) {
-			if (per_cpu(nmi_touch, cpu) != 1)
-				per_cpu(nmi_touch, cpu) = 1;
-		}
-	}
-
- 	touch_softlockup_watchdog();
-}
-
-int __kprobes nmi_watchdog_tick(struct pt_regs * regs, unsigned reason)
-{
-	int sum;
-	int touched = 0;
-	int cpu = smp_processor_id();
-	int rc = 0;
-
-	/* check for other users first */
-	if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT)
-			== NOTIFY_STOP) {
-		rc = 1;
-		touched = 1;
-	}
-
-	sum = read_pda(apic_timer_irqs);
-	if (__get_cpu_var(nmi_touch)) {
-		__get_cpu_var(nmi_touch) = 0;
-		touched = 1;
-	}
-
-	if (cpu_isset(cpu, backtrace_mask)) {
-		static DEFINE_SPINLOCK(lock);	/* Serialise the printks */
-
-		spin_lock(&lock);
-		printk("NMI backtrace for cpu %d\n", cpu);
-		dump_stack();
-		spin_unlock(&lock);
-		cpu_clear(cpu, backtrace_mask);
-	}
-
-#ifdef CONFIG_X86_MCE
-	/* Could check oops_in_progress here too, but it's safer
-	   not too */
-	if (atomic_read(&mce_entry) > 0)
-		touched = 1;
-#endif
-	/* if the apic timer isn't firing, this cpu isn't doing much */
-	if (!touched && __get_cpu_var(last_irq_sum) == sum) {
-		/*
-		 * Ayiee, looks like this CPU is stuck ...
-		 * wait a few IRQs (5 seconds) before doing the oops ...
-		 */
-		local_inc(&__get_cpu_var(alert_counter));
-		if (local_read(&__get_cpu_var(alert_counter)) == 5*nmi_hz)
-			die_nmi("NMI Watchdog detected LOCKUP on CPU %d\n", regs,
-				panic_on_timeout);
-	} else {
-		__get_cpu_var(last_irq_sum) = sum;
-		local_set(&__get_cpu_var(alert_counter), 0);
-	}
-
-	/* see if the nmi watchdog went off */
-	if (!__get_cpu_var(wd_enabled))
-		return rc;
-	switch (nmi_watchdog) {
-	case NMI_LOCAL_APIC:
-		rc |= lapic_wd_event(nmi_hz);
-		break;
-	case NMI_IO_APIC:
-		/* don't know how to accurately check for this.
-		 * just assume it was a watchdog timer interrupt
-		 * This matches the old behaviour.
-		 */
-		rc = 1;
-		break;
-	}
-	return rc;
-}
-
-static unsigned ignore_nmis;
-
-asmlinkage __kprobes void do_nmi(struct pt_regs * regs, long error_code)
-{
-	nmi_enter();
-	add_pda(__nmi_count,1);
-	if (!ignore_nmis)
-		default_do_nmi(regs);
-	nmi_exit();
-}
-
-int do_nmi_callback(struct pt_regs * regs, int cpu)
-{
-#ifdef CONFIG_SYSCTL
-	if (unknown_nmi_panic)
-		return unknown_nmi_panic_callback(regs, cpu);
-#endif
-	return 0;
-}
-
-void stop_nmi(void)
-{
-	acpi_nmi_disable();
-	ignore_nmis++;
-}
-
-void restart_nmi(void)
-{
-	ignore_nmis--;
-	acpi_nmi_enable();
-}
-
-#ifdef CONFIG_SYSCTL
-
-static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu)
-{
-	unsigned char reason = get_nmi_reason();
-	char buf[64];
-
-	sprintf(buf, "NMI received for unknown reason %02x\n", reason);
-	die_nmi(buf, regs, 1);	/* Always panic here */
-	return 0;
-}
-
-/*
- * proc handler for /proc/sys/kernel/nmi
- */
-int proc_nmi_enabled(struct ctl_table *table, int write, struct file *file,
-			void __user *buffer, size_t *length, loff_t *ppos)
-{
-	int old_state;
-
-	nmi_watchdog_enabled = (atomic_read(&nmi_active) > 0) ? 1 : 0;
-	old_state = nmi_watchdog_enabled;
-	proc_dointvec(table, write, file, buffer, length, ppos);
-	if (!!old_state == !!nmi_watchdog_enabled)
-		return 0;
-
-	if (atomic_read(&nmi_active) < 0 || nmi_watchdog == NMI_DISABLED) {
-		printk( KERN_WARNING "NMI watchdog is permanently disabled\n");
-		return -EIO;
-	}
-
-	/* if nmi_watchdog is not set yet, then set it */
-	nmi_watchdog_default();
-
-	if (nmi_watchdog == NMI_LOCAL_APIC) {
-		if (nmi_watchdog_enabled)
-			enable_lapic_nmi_watchdog();
-		else
-			disable_lapic_nmi_watchdog();
-	} else {
-		printk( KERN_WARNING
-			"NMI watchdog doesn't know what hardware to touch\n");
-		return -EIO;
-	}
-	return 0;
-}
-
-#endif
-
-void __trigger_all_cpu_backtrace(void)
-{
-	int i;
-
-	backtrace_mask = cpu_online_map;
-	/* Wait for up to 10 seconds for all CPUs to do the backtrace */
-	for (i = 0; i < 10 * 1000; i++) {
-		if (cpus_empty(backtrace_mask))
-			break;
-		mdelay(1);
-	}
-}
-
-EXPORT_SYMBOL(nmi_active);
-EXPORT_SYMBOL(nmi_watchdog);
-EXPORT_SYMBOL(touch_nmi_watchdog);
diff --git a/arch/x86_64/kernel/pci-calgary_64.c b/arch/x86_64/kernel/pci-calgary_64.c
deleted file mode 100644
index 71da01e..0000000
--- a/arch/x86_64/kernel/pci-calgary_64.c
+++ /dev/null
@@ -1,1578 +0,0 @@
-/*
- * Derived from arch/powerpc/kernel/iommu.c
- *
- * Copyright IBM Corporation, 2006-2007
- * Copyright (C) 2006  Jon Mason <jdmason@kudzu.us>
- *
- * Author: Jon Mason <jdmason@kudzu.us>
- * Author: Muli Ben-Yehuda <muli@il.ibm.com>
-
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
-#include <linux/spinlock.h>
-#include <linux/string.h>
-#include <linux/dma-mapping.h>
-#include <linux/init.h>
-#include <linux/bitops.h>
-#include <linux/pci_ids.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <asm/iommu.h>
-#include <asm/calgary.h>
-#include <asm/tce.h>
-#include <asm/pci-direct.h>
-#include <asm/system.h>
-#include <asm/dma.h>
-#include <asm/rio.h>
-
-#ifdef CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT
-int use_calgary __read_mostly = 1;
-#else
-int use_calgary __read_mostly = 0;
-#endif /* CONFIG_CALGARY_DEFAULT_ENABLED */
-
-#define PCI_DEVICE_ID_IBM_CALGARY 0x02a1
-#define PCI_DEVICE_ID_IBM_CALIOC2 0x0308
-
-/* register offsets inside the host bridge space */
-#define CALGARY_CONFIG_REG	0x0108
-#define PHB_CSR_OFFSET		0x0110 /* Channel Status */
-#define PHB_PLSSR_OFFSET	0x0120
-#define PHB_CONFIG_RW_OFFSET	0x0160
-#define PHB_IOBASE_BAR_LOW	0x0170
-#define PHB_IOBASE_BAR_HIGH	0x0180
-#define PHB_MEM_1_LOW		0x0190
-#define PHB_MEM_1_HIGH		0x01A0
-#define PHB_IO_ADDR_SIZE	0x01B0
-#define PHB_MEM_1_SIZE		0x01C0
-#define PHB_MEM_ST_OFFSET	0x01D0
-#define PHB_AER_OFFSET		0x0200
-#define PHB_CONFIG_0_HIGH	0x0220
-#define PHB_CONFIG_0_LOW	0x0230
-#define PHB_CONFIG_0_END	0x0240
-#define PHB_MEM_2_LOW		0x02B0
-#define PHB_MEM_2_HIGH		0x02C0
-#define PHB_MEM_2_SIZE_HIGH	0x02D0
-#define PHB_MEM_2_SIZE_LOW	0x02E0
-#define PHB_DOSHOLE_OFFSET	0x08E0
-
-/* CalIOC2 specific */
-#define PHB_SAVIOR_L2		0x0DB0
-#define PHB_PAGE_MIG_CTRL	0x0DA8
-#define PHB_PAGE_MIG_DEBUG	0x0DA0
-#define PHB_ROOT_COMPLEX_STATUS 0x0CB0
-
-/* PHB_CONFIG_RW */
-#define PHB_TCE_ENABLE		0x20000000
-#define PHB_SLOT_DISABLE	0x1C000000
-#define PHB_DAC_DISABLE		0x01000000
-#define PHB_MEM2_ENABLE		0x00400000
-#define PHB_MCSR_ENABLE		0x00100000
-/* TAR (Table Address Register) */
-#define TAR_SW_BITS		0x0000ffffffff800fUL
-#define TAR_VALID		0x0000000000000008UL
-/* CSR (Channel/DMA Status Register) */
-#define CSR_AGENT_MASK		0xffe0ffff
-/* CCR (Calgary Configuration Register) */
-#define CCR_2SEC_TIMEOUT	0x000000000000000EUL
-/* PMCR/PMDR (Page Migration Control/Debug Registers */
-#define PMR_SOFTSTOP		0x80000000
-#define PMR_SOFTSTOPFAULT	0x40000000
-#define PMR_HARDSTOP		0x20000000
-
-#define MAX_NUM_OF_PHBS		8 /* how many PHBs in total? */
-#define MAX_NUM_CHASSIS		8 /* max number of chassis */
-/* MAX_PHB_BUS_NUM is the maximal possible dev->bus->number */
-#define MAX_PHB_BUS_NUM		(MAX_NUM_OF_PHBS * MAX_NUM_CHASSIS * 2)
-#define PHBS_PER_CALGARY	4
-
-/* register offsets in Calgary's internal register space */
-static const unsigned long tar_offsets[] = {
-	0x0580 /* TAR0 */,
-	0x0588 /* TAR1 */,
-	0x0590 /* TAR2 */,
-	0x0598 /* TAR3 */
-};
-
-static const unsigned long split_queue_offsets[] = {
-	0x4870 /* SPLIT QUEUE 0 */,
-	0x5870 /* SPLIT QUEUE 1 */,
-	0x6870 /* SPLIT QUEUE 2 */,
-	0x7870 /* SPLIT QUEUE 3 */
-};
-
-static const unsigned long phb_offsets[] = {
-	0x8000 /* PHB0 */,
-	0x9000 /* PHB1 */,
-	0xA000 /* PHB2 */,
-	0xB000 /* PHB3 */
-};
-
-/* PHB debug registers */
-
-static const unsigned long phb_debug_offsets[] = {
-	0x4000	/* PHB 0 DEBUG */,
-	0x5000	/* PHB 1 DEBUG */,
-	0x6000	/* PHB 2 DEBUG */,
-	0x7000	/* PHB 3 DEBUG */
-};
-
-/*
- * STUFF register for each debug PHB,
- * byte 1 = start bus number, byte 2 = end bus number
- */
-
-#define PHB_DEBUG_STUFF_OFFSET	0x0020
-
-#define EMERGENCY_PAGES 32 /* = 128KB */
-
-unsigned int specified_table_size = TCE_TABLE_SIZE_UNSPECIFIED;
-static int translate_empty_slots __read_mostly = 0;
-static int calgary_detected __read_mostly = 0;
-
-static struct rio_table_hdr	*rio_table_hdr __initdata;
-static struct scal_detail	*scal_devs[MAX_NUMNODES] __initdata;
-static struct rio_detail	*rio_devs[MAX_NUMNODES * 4] __initdata;
-
-struct calgary_bus_info {
-	void *tce_space;
-	unsigned char translation_disabled;
-	signed char phbid;
-	void __iomem *bbar;
-};
-
-static void calgary_handle_quirks(struct iommu_table *tbl, struct pci_dev *dev);
-static void calgary_tce_cache_blast(struct iommu_table *tbl);
-static void calgary_dump_error_regs(struct iommu_table *tbl);
-static void calioc2_handle_quirks(struct iommu_table *tbl, struct pci_dev *dev);
-static void calioc2_tce_cache_blast(struct iommu_table *tbl);
-static void calioc2_dump_error_regs(struct iommu_table *tbl);
-
-static struct cal_chipset_ops calgary_chip_ops = {
-	.handle_quirks = calgary_handle_quirks,
-	.tce_cache_blast = calgary_tce_cache_blast,
-	.dump_error_regs = calgary_dump_error_regs
-};
-
-static struct cal_chipset_ops calioc2_chip_ops = {
-	.handle_quirks = calioc2_handle_quirks,
-	.tce_cache_blast = calioc2_tce_cache_blast,
-	.dump_error_regs = calioc2_dump_error_regs
-};
-
-static struct calgary_bus_info bus_info[MAX_PHB_BUS_NUM] = { { NULL, 0, 0 }, };
-
-/* enable this to stress test the chip's TCE cache */
-#ifdef CONFIG_IOMMU_DEBUG
-int debugging __read_mostly = 1;
-
-static inline unsigned long verify_bit_range(unsigned long* bitmap,
-	int expected, unsigned long start, unsigned long end)
-{
-	unsigned long idx = start;
-
-	BUG_ON(start >= end);
-
-	while (idx < end) {
-		if (!!test_bit(idx, bitmap) != expected)
-			return idx;
-		++idx;
-	}
-
-	/* all bits have the expected value */
-	return ~0UL;
-}
-#else /* debugging is disabled */
-int debugging __read_mostly = 0;
-
-static inline unsigned long verify_bit_range(unsigned long* bitmap,
-	int expected, unsigned long start, unsigned long end)
-{
-	return ~0UL;
-}
-
-#endif /* CONFIG_IOMMU_DEBUG */
-
-static inline unsigned int num_dma_pages(unsigned long dma, unsigned int dmalen)
-{
-	unsigned int npages;
-
-	npages = PAGE_ALIGN(dma + dmalen) - (dma & PAGE_MASK);
-	npages >>= PAGE_SHIFT;
-
-	return npages;
-}
-
-static inline int translate_phb(struct pci_dev* dev)
-{
-	int disabled = bus_info[dev->bus->number].translation_disabled;
-	return !disabled;
-}
-
-static void iommu_range_reserve(struct iommu_table *tbl,
-	unsigned long start_addr, unsigned int npages)
-{
-	unsigned long index;
-	unsigned long end;
-	unsigned long badbit;
-	unsigned long flags;
-
-	index = start_addr >> PAGE_SHIFT;
-
-	/* bail out if we're asked to reserve a region we don't cover */
-	if (index >= tbl->it_size)
-		return;
-
-	end = index + npages;
-	if (end > tbl->it_size) /* don't go off the table */
-		end = tbl->it_size;
-
-	spin_lock_irqsave(&tbl->it_lock, flags);
-
-	badbit = verify_bit_range(tbl->it_map, 0, index, end);
-	if (badbit != ~0UL) {
-		if (printk_ratelimit())
-			printk(KERN_ERR "Calgary: entry already allocated at "
-			       "0x%lx tbl %p dma 0x%lx npages %u\n",
-			       badbit, tbl, start_addr, npages);
-	}
-
-	set_bit_string(tbl->it_map, index, npages);
-
-	spin_unlock_irqrestore(&tbl->it_lock, flags);
-}
-
-static unsigned long iommu_range_alloc(struct iommu_table *tbl,
-	unsigned int npages)
-{
-	unsigned long flags;
-	unsigned long offset;
-
-	BUG_ON(npages == 0);
-
-	spin_lock_irqsave(&tbl->it_lock, flags);
-
-	offset = find_next_zero_string(tbl->it_map, tbl->it_hint,
-				       tbl->it_size, npages);
-	if (offset == ~0UL) {
-		tbl->chip_ops->tce_cache_blast(tbl);
-		offset = find_next_zero_string(tbl->it_map, 0,
-					       tbl->it_size, npages);
-		if (offset == ~0UL) {
-			printk(KERN_WARNING "Calgary: IOMMU full.\n");
-			spin_unlock_irqrestore(&tbl->it_lock, flags);
-			if (panic_on_overflow)
-				panic("Calgary: fix the allocator.\n");
-			else
-				return bad_dma_address;
-		}
-	}
-
-	set_bit_string(tbl->it_map, offset, npages);
-	tbl->it_hint = offset + npages;
-	BUG_ON(tbl->it_hint > tbl->it_size);
-
-	spin_unlock_irqrestore(&tbl->it_lock, flags);
-
-	return offset;
-}
-
-static dma_addr_t iommu_alloc(struct iommu_table *tbl, void *vaddr,
-	unsigned int npages, int direction)
-{
-	unsigned long entry;
-	dma_addr_t ret = bad_dma_address;
-
-	entry = iommu_range_alloc(tbl, npages);
-
-	if (unlikely(entry == bad_dma_address))
-		goto error;
-
-	/* set the return dma address */
-	ret = (entry << PAGE_SHIFT) | ((unsigned long)vaddr & ~PAGE_MASK);
-
-	/* put the TCEs in the HW table */
-	tce_build(tbl, entry, npages, (unsigned long)vaddr & PAGE_MASK,
-		  direction);
-
-	return ret;
-
-error:
-	printk(KERN_WARNING "Calgary: failed to allocate %u pages in "
-	       "iommu %p\n", npages, tbl);
-	return bad_dma_address;
-}
-
-static void iommu_free(struct iommu_table *tbl, dma_addr_t dma_addr,
-	unsigned int npages)
-{
-	unsigned long entry;
-	unsigned long badbit;
-	unsigned long badend;
-	unsigned long flags;
-
-	/* were we called with bad_dma_address? */
-	badend = bad_dma_address + (EMERGENCY_PAGES * PAGE_SIZE);
-	if (unlikely((dma_addr >= bad_dma_address) && (dma_addr < badend))) {
-		printk(KERN_ERR "Calgary: driver tried unmapping bad DMA "
-		       "address 0x%Lx\n", dma_addr);
-		WARN_ON(1);
-		return;
-	}
-
-	entry = dma_addr >> PAGE_SHIFT;
-
-	BUG_ON(entry + npages > tbl->it_size);
-
-	tce_free(tbl, entry, npages);
-
-	spin_lock_irqsave(&tbl->it_lock, flags);
-
-	badbit = verify_bit_range(tbl->it_map, 1, entry, entry + npages);
-	if (badbit != ~0UL) {
-		if (printk_ratelimit())
-			printk(KERN_ERR "Calgary: bit is off at 0x%lx "
-			       "tbl %p dma 0x%Lx entry 0x%lx npages %u\n",
-			       badbit, tbl, dma_addr, entry, npages);
-	}
-
-	__clear_bit_string(tbl->it_map, entry, npages);
-
-	spin_unlock_irqrestore(&tbl->it_lock, flags);
-}
-
-static inline struct iommu_table *find_iommu_table(struct device *dev)
-{
-	struct pci_dev *pdev;
-	struct pci_bus *pbus;
-	struct iommu_table *tbl;
-
-	pdev = to_pci_dev(dev);
-
-	pbus = pdev->bus;
-
-	/* is the device behind a bridge? Look for the root bus */
-	while (pbus->parent)
-		pbus = pbus->parent;
-
-	tbl = pci_iommu(pbus);
-
-	BUG_ON(tbl && (tbl->it_busno != pbus->number));
-
-	return tbl;
-}
-
-static void calgary_unmap_sg(struct device *dev,
-	struct scatterlist *sglist, int nelems, int direction)
-{
-	struct iommu_table *tbl = find_iommu_table(dev);
-
-	if (!translate_phb(to_pci_dev(dev)))
-		return;
-
-	while (nelems--) {
-		unsigned int npages;
-		dma_addr_t dma = sglist->dma_address;
-		unsigned int dmalen = sglist->dma_length;
-
-		if (dmalen == 0)
-			break;
-
-		npages = num_dma_pages(dma, dmalen);
-		iommu_free(tbl, dma, npages);
-		sglist++;
-	}
-}
-
-static int calgary_nontranslate_map_sg(struct device* dev,
-	struct scatterlist *sg, int nelems, int direction)
-{
-	int i;
-
-	for (i = 0; i < nelems; i++ ) {
-		struct scatterlist *s = &sg[i];
-		BUG_ON(!s->page);
-		s->dma_address = virt_to_bus(page_address(s->page) +s->offset);
-		s->dma_length = s->length;
-	}
-	return nelems;
-}
-
-static int calgary_map_sg(struct device *dev, struct scatterlist *sg,
-	int nelems, int direction)
-{
-	struct iommu_table *tbl = find_iommu_table(dev);
-	unsigned long vaddr;
-	unsigned int npages;
-	unsigned long entry;
-	int i;
-
-	if (!translate_phb(to_pci_dev(dev)))
-		return calgary_nontranslate_map_sg(dev, sg, nelems, direction);
-
-	for (i = 0; i < nelems; i++ ) {
-		struct scatterlist *s = &sg[i];
-		BUG_ON(!s->page);
-
-		vaddr = (unsigned long)page_address(s->page) + s->offset;
-		npages = num_dma_pages(vaddr, s->length);
-
-		entry = iommu_range_alloc(tbl, npages);
-		if (entry == bad_dma_address) {
-			/* makes sure unmap knows to stop */
-			s->dma_length = 0;
-			goto error;
-		}
-
-		s->dma_address = (entry << PAGE_SHIFT) | s->offset;
-
-		/* insert into HW table */
-		tce_build(tbl, entry, npages, vaddr & PAGE_MASK,
-			  direction);
-
-		s->dma_length = s->length;
-	}
-
-	return nelems;
-error:
-	calgary_unmap_sg(dev, sg, nelems, direction);
-	for (i = 0; i < nelems; i++) {
-		sg[i].dma_address = bad_dma_address;
-		sg[i].dma_length = 0;
-	}
-	return 0;
-}
-
-static dma_addr_t calgary_map_single(struct device *dev, void *vaddr,
-	size_t size, int direction)
-{
-	dma_addr_t dma_handle = bad_dma_address;
-	unsigned long uaddr;
-	unsigned int npages;
-	struct iommu_table *tbl = find_iommu_table(dev);
-
-	uaddr = (unsigned long)vaddr;
-	npages = num_dma_pages(uaddr, size);
-
-	if (translate_phb(to_pci_dev(dev)))
-		dma_handle = iommu_alloc(tbl, vaddr, npages, direction);
-	else
-		dma_handle = virt_to_bus(vaddr);
-
-	return dma_handle;
-}
-
-static void calgary_unmap_single(struct device *dev, dma_addr_t dma_handle,
-	size_t size, int direction)
-{
-	struct iommu_table *tbl = find_iommu_table(dev);
-	unsigned int npages;
-
-	if (!translate_phb(to_pci_dev(dev)))
-		return;
-
-	npages = num_dma_pages(dma_handle, size);
-	iommu_free(tbl, dma_handle, npages);
-}
-
-static void* calgary_alloc_coherent(struct device *dev, size_t size,
-	dma_addr_t *dma_handle, gfp_t flag)
-{
-	void *ret = NULL;
-	dma_addr_t mapping;
-	unsigned int npages, order;
-	struct iommu_table *tbl = find_iommu_table(dev);
-
-	size = PAGE_ALIGN(size); /* size rounded up to full pages */
-	npages = size >> PAGE_SHIFT;
-	order = get_order(size);
-
-	/* alloc enough pages (and possibly more) */
-	ret = (void *)__get_free_pages(flag, order);
-	if (!ret)
-		goto error;
-	memset(ret, 0, size);
-
-	if (translate_phb(to_pci_dev(dev))) {
-		/* set up tces to cover the allocated range */
-		mapping = iommu_alloc(tbl, ret, npages, DMA_BIDIRECTIONAL);
-		if (mapping == bad_dma_address)
-			goto free;
-
-		*dma_handle = mapping;
-	} else /* non translated slot */
-		*dma_handle = virt_to_bus(ret);
-
-	return ret;
-
-free:
-	free_pages((unsigned long)ret, get_order(size));
-	ret = NULL;
-error:
-	return ret;
-}
-
-static const struct dma_mapping_ops calgary_dma_ops = {
-	.alloc_coherent = calgary_alloc_coherent,
-	.map_single = calgary_map_single,
-	.unmap_single = calgary_unmap_single,
-	.map_sg = calgary_map_sg,
-	.unmap_sg = calgary_unmap_sg,
-};
-
-static inline void __iomem * busno_to_bbar(unsigned char num)
-{
-	return bus_info[num].bbar;
-}
-
-static inline int busno_to_phbid(unsigned char num)
-{
-	return bus_info[num].phbid;
-}
-
-static inline unsigned long split_queue_offset(unsigned char num)
-{
-	size_t idx = busno_to_phbid(num);
-
-	return split_queue_offsets[idx];
-}
-
-static inline unsigned long tar_offset(unsigned char num)
-{
-	size_t idx = busno_to_phbid(num);
-
-	return tar_offsets[idx];
-}
-
-static inline unsigned long phb_offset(unsigned char num)
-{
-	size_t idx = busno_to_phbid(num);
-
-	return phb_offsets[idx];
-}
-
-static inline void __iomem* calgary_reg(void __iomem *bar, unsigned long offset)
-{
-	unsigned long target = ((unsigned long)bar) | offset;
-	return (void __iomem*)target;
-}
-
-static inline int is_calioc2(unsigned short device)
-{
-	return (device == PCI_DEVICE_ID_IBM_CALIOC2);
-}
-
-static inline int is_calgary(unsigned short device)
-{
-	return (device == PCI_DEVICE_ID_IBM_CALGARY);
-}
-
-static inline int is_cal_pci_dev(unsigned short device)
-{
-	return (is_calgary(device) || is_calioc2(device));
-}
-
-static void calgary_tce_cache_blast(struct iommu_table *tbl)
-{
-	u64 val;
-	u32 aer;
-	int i = 0;
-	void __iomem *bbar = tbl->bbar;
-	void __iomem *target;
-
-	/* disable arbitration on the bus */
-	target = calgary_reg(bbar, phb_offset(tbl->it_busno) | PHB_AER_OFFSET);
-	aer = readl(target);
-	writel(0, target);
-
-	/* read plssr to ensure it got there */
-	target = calgary_reg(bbar, phb_offset(tbl->it_busno) | PHB_PLSSR_OFFSET);
-	val = readl(target);
-
-	/* poll split queues until all DMA activity is done */
-	target = calgary_reg(bbar, split_queue_offset(tbl->it_busno));
-	do {
-		val = readq(target);
-		i++;
-	} while ((val & 0xff) != 0xff && i < 100);
-	if (i == 100)
-		printk(KERN_WARNING "Calgary: PCI bus not quiesced, "
-		       "continuing anyway\n");
-
-	/* invalidate TCE cache */
-	target = calgary_reg(bbar, tar_offset(tbl->it_busno));
-	writeq(tbl->tar_val, target);
-
-	/* enable arbitration */
-	target = calgary_reg(bbar, phb_offset(tbl->it_busno) | PHB_AER_OFFSET);
-	writel(aer, target);
-	(void)readl(target); /* flush */
-}
-
-static void calioc2_tce_cache_blast(struct iommu_table *tbl)
-{
-	void __iomem *bbar = tbl->bbar;
-	void __iomem *target;
-	u64 val64;
-	u32 val;
-	int i = 0;
-	int count = 1;
-	unsigned char bus = tbl->it_busno;
-
-begin:
-	printk(KERN_DEBUG "Calgary: CalIOC2 bus 0x%x entering tce cache blast "
-	       "sequence - count %d\n", bus, count);
-
-	/* 1. using the Page Migration Control reg set SoftStop */
-	target = calgary_reg(bbar, phb_offset(bus) | PHB_PAGE_MIG_CTRL);
-	val = be32_to_cpu(readl(target));
-	printk(KERN_DEBUG "1a. read 0x%x [LE] from %p\n", val, target);
-	val |= PMR_SOFTSTOP;
-	printk(KERN_DEBUG "1b. writing 0x%x [LE] to %p\n", val, target);
-	writel(cpu_to_be32(val), target);
-
-	/* 2. poll split queues until all DMA activity is done */
-	printk(KERN_DEBUG "2a. starting to poll split queues\n");
-	target = calgary_reg(bbar, split_queue_offset(bus));
-	do {
-		val64 = readq(target);
-		i++;
-	} while ((val64 & 0xff) != 0xff && i < 100);
-	if (i == 100)
-		printk(KERN_WARNING "CalIOC2: PCI bus not quiesced, "
-		       "continuing anyway\n");
-
-	/* 3. poll Page Migration DEBUG for SoftStopFault */
-	target = calgary_reg(bbar, phb_offset(bus) | PHB_PAGE_MIG_DEBUG);
-	val = be32_to_cpu(readl(target));
-	printk(KERN_DEBUG "3. read 0x%x [LE] from %p\n", val, target);
-
-	/* 4. if SoftStopFault - goto (1) */
-	if (val & PMR_SOFTSTOPFAULT) {
-		if (++count < 100)
-			goto begin;
-		else {
-			printk(KERN_WARNING "CalIOC2: too many SoftStopFaults, "
-			       "aborting TCE cache flush sequence!\n");
-			return; /* pray for the best */
-		}
-	}
-
-	/* 5. Slam into HardStop by reading PHB_PAGE_MIG_CTRL */
-	target = calgary_reg(bbar, phb_offset(bus) | PHB_PAGE_MIG_CTRL);
-	printk(KERN_DEBUG "5a. slamming into HardStop by reading %p\n", target);
-	val = be32_to_cpu(readl(target));
-	printk(KERN_DEBUG "5b. read 0x%x [LE] from %p\n", val, target);
-	target = calgary_reg(bbar, phb_offset(bus) | PHB_PAGE_MIG_DEBUG);
-	val = be32_to_cpu(readl(target));
-	printk(KERN_DEBUG "5c. read 0x%x [LE] from %p (debug)\n", val, target);
-
-	/* 6. invalidate TCE cache */
-	printk(KERN_DEBUG "6. invalidating TCE cache\n");
-	target = calgary_reg(bbar, tar_offset(bus));
-	writeq(tbl->tar_val, target);
-
-	/* 7. Re-read PMCR */
-	printk(KERN_DEBUG "7a. Re-reading PMCR\n");
-	target = calgary_reg(bbar, phb_offset(bus) | PHB_PAGE_MIG_CTRL);
-	val = be32_to_cpu(readl(target));
-	printk(KERN_DEBUG "7b. read 0x%x [LE] from %p\n", val, target);
-
-	/* 8. Remove HardStop */
-	printk(KERN_DEBUG "8a. removing HardStop from PMCR\n");
-	target = calgary_reg(bbar, phb_offset(bus) | PHB_PAGE_MIG_CTRL);
-	val = 0;
-	printk(KERN_DEBUG "8b. writing 0x%x [LE] to %p\n", val, target);
-	writel(cpu_to_be32(val), target);
-	val = be32_to_cpu(readl(target));
-	printk(KERN_DEBUG "8c. read 0x%x [LE] from %p\n", val, target);
-}
-
-static void __init calgary_reserve_mem_region(struct pci_dev *dev, u64 start,
-	u64 limit)
-{
-	unsigned int numpages;
-
-	limit = limit | 0xfffff;
-	limit++;
-
-	numpages = ((limit - start) >> PAGE_SHIFT);
-	iommu_range_reserve(pci_iommu(dev->bus), start, numpages);
-}
-
-static void __init calgary_reserve_peripheral_mem_1(struct pci_dev *dev)
-{
-	void __iomem *target;
-	u64 low, high, sizelow;
-	u64 start, limit;
-	struct iommu_table *tbl = pci_iommu(dev->bus);
-	unsigned char busnum = dev->bus->number;
-	void __iomem *bbar = tbl->bbar;
-
-	/* peripheral MEM_1 region */
-	target = calgary_reg(bbar, phb_offset(busnum) | PHB_MEM_1_LOW);
-	low = be32_to_cpu(readl(target));
-	target = calgary_reg(bbar, phb_offset(busnum) | PHB_MEM_1_HIGH);
-	high = be32_to_cpu(readl(target));
-	target = calgary_reg(bbar, phb_offset(busnum) | PHB_MEM_1_SIZE);
-	sizelow = be32_to_cpu(readl(target));
-
-	start = (high << 32) | low;
-	limit = sizelow;
-
-	calgary_reserve_mem_region(dev, start, limit);
-}
-
-static void __init calgary_reserve_peripheral_mem_2(struct pci_dev *dev)
-{
-	void __iomem *target;
-	u32 val32;
-	u64 low, high, sizelow, sizehigh;
-	u64 start, limit;
-	struct iommu_table *tbl = pci_iommu(dev->bus);
-	unsigned char busnum = dev->bus->number;
-	void __iomem *bbar = tbl->bbar;
-
-	/* is it enabled? */
-	target = calgary_reg(bbar, phb_offset(busnum) | PHB_CONFIG_RW_OFFSET);
-	val32 = be32_to_cpu(readl(target));
-	if (!(val32 & PHB_MEM2_ENABLE))
-		return;
-
-	target = calgary_reg(bbar, phb_offset(busnum) | PHB_MEM_2_LOW);
-	low = be32_to_cpu(readl(target));
-	target = calgary_reg(bbar, phb_offset(busnum) | PHB_MEM_2_HIGH);
-	high = be32_to_cpu(readl(target));
-	target = calgary_reg(bbar, phb_offset(busnum) | PHB_MEM_2_SIZE_LOW);
-	sizelow = be32_to_cpu(readl(target));
-	target = calgary_reg(bbar, phb_offset(busnum) | PHB_MEM_2_SIZE_HIGH);
-	sizehigh = be32_to_cpu(readl(target));
-
-	start = (high << 32) | low;
-	limit = (sizehigh << 32) | sizelow;
-
-	calgary_reserve_mem_region(dev, start, limit);
-}
-
-/*
- * some regions of the IO address space do not get translated, so we
- * must not give devices IO addresses in those regions. The regions
- * are the 640KB-1MB region and the two PCI peripheral memory holes.
- * Reserve all of them in the IOMMU bitmap to avoid giving them out
- * later.
- */
-static void __init calgary_reserve_regions(struct pci_dev *dev)
-{
-	unsigned int npages;
-	u64 start;
-	struct iommu_table *tbl = pci_iommu(dev->bus);
-
-	/* reserve EMERGENCY_PAGES from bad_dma_address and up */
-	iommu_range_reserve(tbl, bad_dma_address, EMERGENCY_PAGES);
-
-	/* avoid the BIOS/VGA first 640KB-1MB region */
-	/* for CalIOC2 - avoid the entire first MB */
-	if (is_calgary(dev->device)) {
-		start = (640 * 1024);
-		npages = ((1024 - 640) * 1024) >> PAGE_SHIFT;
-	} else { /* calioc2 */
-		start = 0;
-		npages = (1 * 1024 * 1024) >> PAGE_SHIFT;
-	}
-	iommu_range_reserve(tbl, start, npages);
-
-	/* reserve the two PCI peripheral memory regions in IO space */
-	calgary_reserve_peripheral_mem_1(dev);
-	calgary_reserve_peripheral_mem_2(dev);
-}
-
-static int __init calgary_setup_tar(struct pci_dev *dev, void __iomem *bbar)
-{
-	u64 val64;
-	u64 table_phys;
-	void __iomem *target;
-	int ret;
-	struct iommu_table *tbl;
-
-	/* build TCE tables for each PHB */
-	ret = build_tce_table(dev, bbar);
-	if (ret)
-		return ret;
-
-	tbl = pci_iommu(dev->bus);
-	tbl->it_base = (unsigned long)bus_info[dev->bus->number].tce_space;
-	tce_free(tbl, 0, tbl->it_size);
-
-	if (is_calgary(dev->device))
-		tbl->chip_ops = &calgary_chip_ops;
-	else if (is_calioc2(dev->device))
-		tbl->chip_ops = &calioc2_chip_ops;
-	else
-		BUG();
-
-	calgary_reserve_regions(dev);
-
-	/* set TARs for each PHB */
-	target = calgary_reg(bbar, tar_offset(dev->bus->number));
-	val64 = be64_to_cpu(readq(target));
-
-	/* zero out all TAR bits under sw control */
-	val64 &= ~TAR_SW_BITS;
-	table_phys = (u64)__pa(tbl->it_base);
-
-	val64 |= table_phys;
-
-	BUG_ON(specified_table_size > TCE_TABLE_SIZE_8M);
-	val64 |= (u64) specified_table_size;
-
-	tbl->tar_val = cpu_to_be64(val64);
-
-	writeq(tbl->tar_val, target);
-	readq(target); /* flush */
-
-	return 0;
-}
-
-static void __init calgary_free_bus(struct pci_dev *dev)
-{
-	u64 val64;
-	struct iommu_table *tbl = pci_iommu(dev->bus);
-	void __iomem *target;
-	unsigned int bitmapsz;
-
-	target = calgary_reg(tbl->bbar, tar_offset(dev->bus->number));
-	val64 = be64_to_cpu(readq(target));
-	val64 &= ~TAR_SW_BITS;
-	writeq(cpu_to_be64(val64), target);
-	readq(target); /* flush */
-
-	bitmapsz = tbl->it_size / BITS_PER_BYTE;
-	free_pages((unsigned long)tbl->it_map, get_order(bitmapsz));
-	tbl->it_map = NULL;
-
-	kfree(tbl);
-	
-	set_pci_iommu(dev->bus, NULL);
-
-	/* Can't free bootmem allocated memory after system is up :-( */
-	bus_info[dev->bus->number].tce_space = NULL;
-}
-
-static void calgary_dump_error_regs(struct iommu_table *tbl)
-{
-	void __iomem *bbar = tbl->bbar;
-	void __iomem *target;
-	u32 csr, plssr;
-
-	target = calgary_reg(bbar, phb_offset(tbl->it_busno) | PHB_CSR_OFFSET);
-	csr = be32_to_cpu(readl(target));
-
-	target = calgary_reg(bbar, phb_offset(tbl->it_busno) | PHB_PLSSR_OFFSET);
-	plssr = be32_to_cpu(readl(target));
-
-	/* If no error, the agent ID in the CSR is not valid */
-	printk(KERN_EMERG "Calgary: DMA error on Calgary PHB 0x%x, "
-	       "0x%08x@CSR 0x%08x@PLSSR\n", tbl->it_busno, csr, plssr);
-}
-
-static void calioc2_dump_error_regs(struct iommu_table *tbl)
-{
-	void __iomem *bbar = tbl->bbar;
-	u32 csr, csmr, plssr, mck, rcstat;
-	void __iomem *target;
-	unsigned long phboff = phb_offset(tbl->it_busno);
-	unsigned long erroff;
-	u32 errregs[7];
-	int i;
-
-	/* dump CSR */
-	target = calgary_reg(bbar, phboff | PHB_CSR_OFFSET);
-	csr = be32_to_cpu(readl(target));
-	/* dump PLSSR */
-	target = calgary_reg(bbar, phboff | PHB_PLSSR_OFFSET);
-	plssr = be32_to_cpu(readl(target));
-	/* dump CSMR */
-	target = calgary_reg(bbar, phboff | 0x290);
-	csmr = be32_to_cpu(readl(target));
-	/* dump mck */
-	target = calgary_reg(bbar, phboff | 0x800);
-	mck = be32_to_cpu(readl(target));
-
-	printk(KERN_EMERG "Calgary: DMA error on CalIOC2 PHB 0x%x\n",
-	       tbl->it_busno);
-
-	printk(KERN_EMERG "Calgary: 0x%08x@CSR 0x%08x@PLSSR 0x%08x@CSMR 0x%08x@MCK\n",
-	       csr, plssr, csmr, mck);
-
-	/* dump rest of error regs */
-	printk(KERN_EMERG "Calgary: ");
-	for (i = 0; i < ARRAY_SIZE(errregs); i++) {
-		/* err regs are at 0x810 - 0x870 */
-		erroff = (0x810 + (i * 0x10));
-		target = calgary_reg(bbar, phboff | erroff);
-		errregs[i] = be32_to_cpu(readl(target));
-		printk("0x%08x@0x%lx ", errregs[i], erroff);
-	}
-	printk("\n");
-
-	/* root complex status */
-	target = calgary_reg(bbar, phboff | PHB_ROOT_COMPLEX_STATUS);
-	rcstat = be32_to_cpu(readl(target));
-	printk(KERN_EMERG "Calgary: 0x%08x@0x%x\n", rcstat,
-	       PHB_ROOT_COMPLEX_STATUS);
-}
-
-static void calgary_watchdog(unsigned long data)
-{
-	struct pci_dev *dev = (struct pci_dev *)data;
-	struct iommu_table *tbl = pci_iommu(dev->bus);
-	void __iomem *bbar = tbl->bbar;
-	u32 val32;
-	void __iomem *target;
-
-	target = calgary_reg(bbar, phb_offset(tbl->it_busno) | PHB_CSR_OFFSET);
-	val32 = be32_to_cpu(readl(target));
-
-	/* If no error, the agent ID in the CSR is not valid */
-	if (val32 & CSR_AGENT_MASK) {
-		tbl->chip_ops->dump_error_regs(tbl);
-
-		/* reset error */
-		writel(0, target);
-
-		/* Disable bus that caused the error */
-		target = calgary_reg(bbar, phb_offset(tbl->it_busno) |
-				     PHB_CONFIG_RW_OFFSET);
-		val32 = be32_to_cpu(readl(target));
-		val32 |= PHB_SLOT_DISABLE;
-		writel(cpu_to_be32(val32), target);
-		readl(target); /* flush */
-	} else {
-		/* Reset the timer */
-		mod_timer(&tbl->watchdog_timer, jiffies + 2 * HZ);
-	}
-}
-
-static void __init calgary_set_split_completion_timeout(void __iomem *bbar,
-	unsigned char busnum, unsigned long timeout)
-{
-	u64 val64;
-	void __iomem *target;
-	unsigned int phb_shift = ~0; /* silence gcc */
-	u64 mask;
-
-	switch (busno_to_phbid(busnum)) {
-	case 0: phb_shift = (63 - 19);
-		break;
-	case 1: phb_shift = (63 - 23);
-		break;
-	case 2: phb_shift = (63 - 27);
-		break;
-	case 3: phb_shift = (63 - 35);
-		break;
-	default:
-		BUG_ON(busno_to_phbid(busnum));
-	}
-
-	target = calgary_reg(bbar, CALGARY_CONFIG_REG);
-	val64 = be64_to_cpu(readq(target));
-
-	/* zero out this PHB's timer bits */
-	mask = ~(0xFUL << phb_shift);
-	val64 &= mask;
-	val64 |= (timeout << phb_shift);
-	writeq(cpu_to_be64(val64), target);
-	readq(target); /* flush */
-}
-
-static void calioc2_handle_quirks(struct iommu_table *tbl, struct pci_dev *dev)
-{
-	unsigned char busnum = dev->bus->number;
-	void __iomem *bbar = tbl->bbar;
-	void __iomem *target;
-	u32 val;
-
-	/*
-	 * CalIOC2 designers recommend setting bit 8 in 0xnDB0 to 1
-	 */
-	target = calgary_reg(bbar, phb_offset(busnum) | PHB_SAVIOR_L2);
-	val = cpu_to_be32(readl(target));
-	val |= 0x00800000;
-	writel(cpu_to_be32(val), target);
-}
-
-static void calgary_handle_quirks(struct iommu_table *tbl, struct pci_dev *dev)
-{
-	unsigned char busnum = dev->bus->number;
-
-	/*
-	 * Give split completion a longer timeout on bus 1 for aic94xx
-	 * http://bugzilla.kernel.org/show_bug.cgi?id=7180
-	 */
-	if (is_calgary(dev->device) && (busnum == 1))
-		calgary_set_split_completion_timeout(tbl->bbar, busnum,
-						     CCR_2SEC_TIMEOUT);
-}
-
-static void __init calgary_enable_translation(struct pci_dev *dev)
-{
-	u32 val32;
-	unsigned char busnum;
-	void __iomem *target;
-	void __iomem *bbar;
-	struct iommu_table *tbl;
-
-	busnum = dev->bus->number;
-	tbl = pci_iommu(dev->bus);
-	bbar = tbl->bbar;
-
-	/* enable TCE in PHB Config Register */
-	target = calgary_reg(bbar, phb_offset(busnum) | PHB_CONFIG_RW_OFFSET);
-	val32 = be32_to_cpu(readl(target));
-	val32 |= PHB_TCE_ENABLE | PHB_DAC_DISABLE | PHB_MCSR_ENABLE;
-
-	printk(KERN_INFO "Calgary: enabling translation on %s PHB %#x\n",
-	       (dev->device == PCI_DEVICE_ID_IBM_CALGARY) ?
-	       "Calgary" : "CalIOC2", busnum);
-	printk(KERN_INFO "Calgary: errant DMAs will now be prevented on this "
-	       "bus.\n");
-
-	writel(cpu_to_be32(val32), target);
-	readl(target); /* flush */
-
-	init_timer(&tbl->watchdog_timer);
-	tbl->watchdog_timer.function = &calgary_watchdog;
-	tbl->watchdog_timer.data = (unsigned long)dev;
-	mod_timer(&tbl->watchdog_timer, jiffies);
-}
-
-static void __init calgary_disable_translation(struct pci_dev *dev)
-{
-	u32 val32;
-	unsigned char busnum;
-	void __iomem *target;
-	void __iomem *bbar;
-	struct iommu_table *tbl;
-
-	busnum = dev->bus->number;
-	tbl = pci_iommu(dev->bus);
-	bbar = tbl->bbar;
-
-	/* disable TCE in PHB Config Register */
-	target = calgary_reg(bbar, phb_offset(busnum) | PHB_CONFIG_RW_OFFSET);
-	val32 = be32_to_cpu(readl(target));
-	val32 &= ~(PHB_TCE_ENABLE | PHB_DAC_DISABLE | PHB_MCSR_ENABLE);
-
-	printk(KERN_INFO "Calgary: disabling translation on PHB %#x!\n", busnum);
-	writel(cpu_to_be32(val32), target);
-	readl(target); /* flush */
-
-	del_timer_sync(&tbl->watchdog_timer);
-}
-
-static void __init calgary_init_one_nontraslated(struct pci_dev *dev)
-{
-	pci_dev_get(dev);
-	set_pci_iommu(dev->bus, NULL);
-
-	/* is the device behind a bridge? */
-	if (dev->bus->parent)
-		dev->bus->parent->self = dev;
-	else
-		dev->bus->self = dev;
-}
-
-static int __init calgary_init_one(struct pci_dev *dev)
-{
-	void __iomem *bbar;
-	struct iommu_table *tbl;
-	int ret;
-
-	BUG_ON(dev->bus->number >= MAX_PHB_BUS_NUM);
-
-	bbar = busno_to_bbar(dev->bus->number);
-	ret = calgary_setup_tar(dev, bbar);
-	if (ret)
-		goto done;
-
-	pci_dev_get(dev);
-
-	if (dev->bus->parent) {
-		if (dev->bus->parent->self)
-			printk(KERN_WARNING "Calgary: IEEEE, dev %p has "
-			       "bus->parent->self!\n", dev);
-		dev->bus->parent->self = dev;
-	} else
-		dev->bus->self = dev;
-
-	tbl = pci_iommu(dev->bus);
-	tbl->chip_ops->handle_quirks(tbl, dev);
-
-	calgary_enable_translation(dev);
-
-	return 0;
-
-done:
-	return ret;
-}
-
-static int __init calgary_locate_bbars(void)
-{
-	int ret;
-	int rioidx, phb, bus;
-	void __iomem *bbar;
-	void __iomem *target;
-	unsigned long offset;
-	u8 start_bus, end_bus;
-	u32 val;
-
-	ret = -ENODATA;
-	for (rioidx = 0; rioidx < rio_table_hdr->num_rio_dev; rioidx++) {
-		struct rio_detail *rio = rio_devs[rioidx];
-
-		if ((rio->type != COMPAT_CALGARY) && (rio->type != ALT_CALGARY))
-			continue;
-
-		/* map entire 1MB of Calgary config space */
-		bbar = ioremap_nocache(rio->BBAR, 1024 * 1024);
-		if (!bbar)
-			goto error;
-
-		for (phb = 0; phb < PHBS_PER_CALGARY; phb++) {
-			offset = phb_debug_offsets[phb] | PHB_DEBUG_STUFF_OFFSET;
-			target = calgary_reg(bbar, offset);
-
-			val = be32_to_cpu(readl(target));
-
-			start_bus = (u8)((val & 0x00FF0000) >> 16);
-			end_bus = (u8)((val & 0x0000FF00) >> 8);
-
-			if (end_bus) {
-				for (bus = start_bus; bus <= end_bus; bus++) {
-					bus_info[bus].bbar = bbar;
-					bus_info[bus].phbid = phb;
-				}
-			} else {
-				bus_info[start_bus].bbar = bbar;
-				bus_info[start_bus].phbid = phb;
-			}
-		}
-	}
-
-	return 0;
-
-error:
-	/* scan bus_info and iounmap any bbars we previously ioremap'd */
-	for (bus = 0; bus < ARRAY_SIZE(bus_info); bus++)
-		if (bus_info[bus].bbar)
-			iounmap(bus_info[bus].bbar);
-
-	return ret;
-}
-
-static int __init calgary_init(void)
-{
-	int ret;
-	struct pci_dev *dev = NULL;
-	void *tce_space;
-
-	ret = calgary_locate_bbars();
-	if (ret)
-		return ret;
-
-	do {
-		dev = pci_get_device(PCI_VENDOR_ID_IBM, PCI_ANY_ID, dev);
-		if (!dev)
-			break;
-		if (!is_cal_pci_dev(dev->device))
-			continue;
-		if (!translate_phb(dev)) {
-			calgary_init_one_nontraslated(dev);
-			continue;
-		}
-		tce_space = bus_info[dev->bus->number].tce_space;
-		if (!tce_space && !translate_empty_slots)
-			continue;
-
-		ret = calgary_init_one(dev);
-		if (ret)
-			goto error;
-	} while (1);
-
-	return ret;
-
-error:
-	do {
-		dev = pci_get_device_reverse(PCI_VENDOR_ID_IBM,
-					     PCI_ANY_ID, dev);
-		if (!dev)
-			break;
-		if (!is_cal_pci_dev(dev->device))
-			continue;
-		if (!translate_phb(dev)) {
-			pci_dev_put(dev);
-			continue;
-		}
-		if (!bus_info[dev->bus->number].tce_space && !translate_empty_slots)
-			continue;
-
-		calgary_disable_translation(dev);
-		calgary_free_bus(dev);
-		pci_dev_put(dev); /* Undo calgary_init_one()'s pci_dev_get() */
-	} while (1);
-
-	return ret;
-}
-
-static inline int __init determine_tce_table_size(u64 ram)
-{
-	int ret;
-
-	if (specified_table_size != TCE_TABLE_SIZE_UNSPECIFIED)
-		return specified_table_size;
-
-	/*
-	 * Table sizes are from 0 to 7 (TCE_TABLE_SIZE_64K to
-	 * TCE_TABLE_SIZE_8M). Table size 0 has 8K entries and each
-	 * larger table size has twice as many entries, so shift the
-	 * max ram address by 13 to divide by 8K and then look at the
-	 * order of the result to choose between 0-7.
-	 */
-	ret = get_order(ram >> 13);
-	if (ret > TCE_TABLE_SIZE_8M)
-		ret = TCE_TABLE_SIZE_8M;
-
-	return ret;
-}
-
-static int __init build_detail_arrays(void)
-{
-	unsigned long ptr;
-	int i, scal_detail_size, rio_detail_size;
-
-	if (rio_table_hdr->num_scal_dev > MAX_NUMNODES){
-		printk(KERN_WARNING
-			"Calgary: MAX_NUMNODES too low! Defined as %d, "
-			"but system has %d nodes.\n",
-			MAX_NUMNODES, rio_table_hdr->num_scal_dev);
-		return -ENODEV;
-	}
-
-	switch (rio_table_hdr->version){
-	case 2:
-		scal_detail_size = 11;
-		rio_detail_size = 13;
-		break;
-	case 3:
-		scal_detail_size = 12;
-		rio_detail_size = 15;
-		break;
-	default:
-		printk(KERN_WARNING
-		       "Calgary: Invalid Rio Grande Table Version: %d\n",
-		       rio_table_hdr->version);
-		return -EPROTO;
-	}
-
-	ptr = ((unsigned long)rio_table_hdr) + 3;
-	for (i = 0; i < rio_table_hdr->num_scal_dev;
-		    i++, ptr += scal_detail_size)
-		scal_devs[i] = (struct scal_detail *)ptr;
-
-	for (i = 0; i < rio_table_hdr->num_rio_dev;
-		    i++, ptr += rio_detail_size)
-		rio_devs[i] = (struct rio_detail *)ptr;
-
-	return 0;
-}
-
-static int __init calgary_bus_has_devices(int bus, unsigned short pci_dev)
-{
-	int dev;
-	u32 val;
-
-	if (pci_dev == PCI_DEVICE_ID_IBM_CALIOC2) {
-		/*
-		 * FIXME: properly scan for devices accross the
-		 * PCI-to-PCI bridge on every CalIOC2 port.
-		 */
-		return 1;
-	}
-
-	for (dev = 1; dev < 8; dev++) {
-		val = read_pci_config(bus, dev, 0, 0);
-		if (val != 0xffffffff)
-			break;
-	}
-	return (val != 0xffffffff);
-}
-
-void __init detect_calgary(void)
-{
-	int bus;
-	void *tbl;
-	int calgary_found = 0;
-	unsigned long ptr;
-	unsigned int offset, prev_offset;
-	int ret;
-
-	/*
-	 * if the user specified iommu=off or iommu=soft or we found
-	 * another HW IOMMU already, bail out.
-	 */
-	if (swiotlb || no_iommu || iommu_detected)
-		return;
-
-	if (!use_calgary)
-		return;
-
-	if (!early_pci_allowed())
-		return;
-
-	printk(KERN_DEBUG "Calgary: detecting Calgary via BIOS EBDA area\n");
-
-	ptr = (unsigned long)phys_to_virt(get_bios_ebda());
-
-	rio_table_hdr = NULL;
-	prev_offset = 0;
-	offset = 0x180;
-	/*
-	 * The next offset is stored in the 1st word.
-	 * Only parse up until the offset increases:
-	 */
-	while (offset > prev_offset) {
-		/* The block id is stored in the 2nd word */
-		if (*((unsigned short *)(ptr + offset + 2)) == 0x4752){
-			/* set the pointer past the offset & block id */
-			rio_table_hdr = (struct rio_table_hdr *)(ptr + offset + 4);
-			break;
-		}
-		prev_offset = offset;
-		offset = *((unsigned short *)(ptr + offset));
-	}
-	if (!rio_table_hdr) {
-		printk(KERN_DEBUG "Calgary: Unable to locate Rio Grande table "
-		       "in EBDA - bailing!\n");
-		return;
-	}
-
-	ret = build_detail_arrays();
-	if (ret) {
-		printk(KERN_DEBUG "Calgary: build_detail_arrays ret %d\n", ret);
-		return;
-	}
-
-	specified_table_size = determine_tce_table_size(end_pfn * PAGE_SIZE);
-
-	for (bus = 0; bus < MAX_PHB_BUS_NUM; bus++) {
-		struct calgary_bus_info *info = &bus_info[bus];
-		unsigned short pci_device;
-		u32 val;
-
-		val = read_pci_config(bus, 0, 0, 0);
-		pci_device = (val & 0xFFFF0000) >> 16;
-
-		if (!is_cal_pci_dev(pci_device))
-			continue;
-
-		if (info->translation_disabled)
-			continue;
-
-		if (calgary_bus_has_devices(bus, pci_device) ||
-		    translate_empty_slots) {
-			tbl = alloc_tce_table();
-			if (!tbl)
-				goto cleanup;
-			info->tce_space = tbl;
-			calgary_found = 1;
-		}
-	}
-
-	printk(KERN_DEBUG "Calgary: finished detection, Calgary %s\n",
-	       calgary_found ? "found" : "not found");
-
-	if (calgary_found) {
-		iommu_detected = 1;
-		calgary_detected = 1;
-		printk(KERN_INFO "PCI-DMA: Calgary IOMMU detected.\n");
-		printk(KERN_INFO "PCI-DMA: Calgary TCE table spec is %d, "
-		       "CONFIG_IOMMU_DEBUG is %s.\n", specified_table_size,
-		       debugging ? "enabled" : "disabled");
-	}
-	return;
-
-cleanup:
-	for (--bus; bus >= 0; --bus) {
-		struct calgary_bus_info *info = &bus_info[bus];
-
-		if (info->tce_space)
-			free_tce_table(info->tce_space);
-	}
-}
-
-int __init calgary_iommu_init(void)
-{
-	int ret;
-
-	if (no_iommu || swiotlb)
-		return -ENODEV;
-
-	if (!calgary_detected)
-		return -ENODEV;
-
-	/* ok, we're trying to use Calgary - let's roll */
-	printk(KERN_INFO "PCI-DMA: Using Calgary IOMMU\n");
-
-	ret = calgary_init();
-	if (ret) {
-		printk(KERN_ERR "PCI-DMA: Calgary init failed %d, "
-		       "falling back to no_iommu\n", ret);
-		if (end_pfn > MAX_DMA32_PFN)
-			printk(KERN_ERR "WARNING more than 4GB of memory, "
-					"32bit PCI may malfunction.\n");
-		return ret;
-	}
-
-	force_iommu = 1;
-	bad_dma_address = 0x0;
-	dma_ops = &calgary_dma_ops;
-
-	return 0;
-}
-
-static int __init calgary_parse_options(char *p)
-{
-	unsigned int bridge;
-	size_t len;
-	char* endp;
-
-	while (*p) {
-		if (!strncmp(p, "64k", 3))
-			specified_table_size = TCE_TABLE_SIZE_64K;
-		else if (!strncmp(p, "128k", 4))
-			specified_table_size = TCE_TABLE_SIZE_128K;
-		else if (!strncmp(p, "256k", 4))
-			specified_table_size = TCE_TABLE_SIZE_256K;
-		else if (!strncmp(p, "512k", 4))
-			specified_table_size = TCE_TABLE_SIZE_512K;
-		else if (!strncmp(p, "1M", 2))
-			specified_table_size = TCE_TABLE_SIZE_1M;
-		else if (!strncmp(p, "2M", 2))
-			specified_table_size = TCE_TABLE_SIZE_2M;
-		else if (!strncmp(p, "4M", 2))
-			specified_table_size = TCE_TABLE_SIZE_4M;
-		else if (!strncmp(p, "8M", 2))
-			specified_table_size = TCE_TABLE_SIZE_8M;
-
-		len = strlen("translate_empty_slots");
-		if (!strncmp(p, "translate_empty_slots", len))
-			translate_empty_slots = 1;
-
-		len = strlen("disable");
-		if (!strncmp(p, "disable", len)) {
-			p += len;
-			if (*p == '=')
-				++p;
-			if (*p == '\0')
-				break;
-			bridge = simple_strtol(p, &endp, 0);
-			if (p == endp)
-				break;
-
-			if (bridge < MAX_PHB_BUS_NUM) {
-				printk(KERN_INFO "Calgary: disabling "
-				       "translation for PHB %#x\n", bridge);
-				bus_info[bridge].translation_disabled = 1;
-			}
-		}
-
-		p = strpbrk(p, ",");
-		if (!p)
-			break;
-
-		p++; /* skip ',' */
-	}
-	return 1;
-}
-__setup("calgary=", calgary_parse_options);
-
-static void __init calgary_fixup_one_tce_space(struct pci_dev *dev)
-{
-	struct iommu_table *tbl;
-	unsigned int npages;
-	int i;
-
-	tbl = pci_iommu(dev->bus);
-
-	for (i = 0; i < 4; i++) {
-		struct resource *r = &dev->resource[PCI_BRIDGE_RESOURCES + i];
-
-		/* Don't give out TCEs that map MEM resources */
-		if (!(r->flags & IORESOURCE_MEM))
-			continue;
-
-		/* 0-based? we reserve the whole 1st MB anyway */
-		if (!r->start)
-			continue;
-
-		/* cover the whole region */
-		npages = (r->end - r->start) >> PAGE_SHIFT;
-		npages++;
-
-		iommu_range_reserve(tbl, r->start, npages);
-	}
-}
-
-static int __init calgary_fixup_tce_spaces(void)
-{
-	struct pci_dev *dev = NULL;
-	void *tce_space;
-
-	if (no_iommu || swiotlb || !calgary_detected)
-		return -ENODEV;
-
-	printk(KERN_DEBUG "Calgary: fixing up tce spaces\n");
-
-	do {
-		dev = pci_get_device(PCI_VENDOR_ID_IBM, PCI_ANY_ID, dev);
-		if (!dev)
-			break;
-		if (!is_cal_pci_dev(dev->device))
-			continue;
-		if (!translate_phb(dev))
-			continue;
-
-		tce_space = bus_info[dev->bus->number].tce_space;
-		if (!tce_space)
-			continue;
-
-		calgary_fixup_one_tce_space(dev);
-
-	} while (1);
-
-	return 0;
-}
-
-/*
- * We need to be call after pcibios_assign_resources (fs_initcall level)
- * and before device_initcall.
- */
-rootfs_initcall(calgary_fixup_tce_spaces);
diff --git a/arch/x86_64/kernel/pci-dma_64.c b/arch/x86_64/kernel/pci-dma_64.c
deleted file mode 100644
index 2971144..0000000
--- a/arch/x86_64/kernel/pci-dma_64.c
+++ /dev/null
@@ -1,346 +0,0 @@
-/*
- * Dynamic DMA mapping support.
- */
-
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/string.h>
-#include <linux/pci.h>
-#include <linux/module.h>
-#include <asm/io.h>
-#include <asm/iommu.h>
-#include <asm/calgary.h>
-
-int iommu_merge __read_mostly = 0;
-EXPORT_SYMBOL(iommu_merge);
-
-dma_addr_t bad_dma_address __read_mostly;
-EXPORT_SYMBOL(bad_dma_address);
-
-/* This tells the BIO block layer to assume merging. Default to off
-   because we cannot guarantee merging later. */
-int iommu_bio_merge __read_mostly = 0;
-EXPORT_SYMBOL(iommu_bio_merge);
-
-static int iommu_sac_force __read_mostly = 0;
-
-int no_iommu __read_mostly;
-#ifdef CONFIG_IOMMU_DEBUG
-int panic_on_overflow __read_mostly = 1;
-int force_iommu __read_mostly = 1;
-#else
-int panic_on_overflow __read_mostly = 0;
-int force_iommu __read_mostly= 0;
-#endif
-
-/* Set this to 1 if there is a HW IOMMU in the system */
-int iommu_detected __read_mostly = 0;
-
-/* Dummy device used for NULL arguments (normally ISA). Better would
-   be probably a smaller DMA mask, but this is bug-to-bug compatible
-   to i386. */
-struct device fallback_dev = {
-	.bus_id = "fallback device",
-	.coherent_dma_mask = DMA_32BIT_MASK,
-	.dma_mask = &fallback_dev.coherent_dma_mask,
-};
-
-/* Allocate DMA memory on node near device */
-noinline static void *
-dma_alloc_pages(struct device *dev, gfp_t gfp, unsigned order)
-{
-	struct page *page;
-	int node;
-#ifdef CONFIG_PCI
-	if (dev->bus == &pci_bus_type)
-		node = pcibus_to_node(to_pci_dev(dev)->bus);
-	else
-#endif
-		node = numa_node_id();
-
-	if (node < first_node(node_online_map))
-		node = first_node(node_online_map);
-
-	page = alloc_pages_node(node, gfp, order);
-	return page ? page_address(page) : NULL;
-}
-
-/*
- * Allocate memory for a coherent mapping.
- */
-void *
-dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
-		   gfp_t gfp)
-{
-	void *memory;
-	unsigned long dma_mask = 0;
-	u64 bus;
-
-	if (!dev)
-		dev = &fallback_dev;
-	dma_mask = dev->coherent_dma_mask;
-	if (dma_mask == 0)
-		dma_mask = DMA_32BIT_MASK;
-
-	/* Device not DMA able */
-	if (dev->dma_mask == NULL)
-		return NULL;
-
-	/* Don't invoke OOM killer */
-	gfp |= __GFP_NORETRY;
-
-	/* Kludge to make it bug-to-bug compatible with i386. i386
-	   uses the normal dma_mask for alloc_coherent. */
-	dma_mask &= *dev->dma_mask;
-
-	/* Why <=? Even when the mask is smaller than 4GB it is often
-	   larger than 16MB and in this case we have a chance of
-	   finding fitting memory in the next higher zone first. If
-	   not retry with true GFP_DMA. -AK */
-	if (dma_mask <= DMA_32BIT_MASK)
-		gfp |= GFP_DMA32;
-
- again:
-	memory = dma_alloc_pages(dev, gfp, get_order(size));
-	if (memory == NULL)
-		return NULL;
-
-	{
-		int high, mmu;
-		bus = virt_to_bus(memory);
-	        high = (bus + size) >= dma_mask;
-		mmu = high;
-		if (force_iommu && !(gfp & GFP_DMA))
-			mmu = 1;
-		else if (high) {
-			free_pages((unsigned long)memory,
-				   get_order(size));
-
-			/* Don't use the 16MB ZONE_DMA unless absolutely
-			   needed. It's better to use remapping first. */
-			if (dma_mask < DMA_32BIT_MASK && !(gfp & GFP_DMA)) {
-				gfp = (gfp & ~GFP_DMA32) | GFP_DMA;
-				goto again;
-			}
-
-			/* Let low level make its own zone decisions */
-			gfp &= ~(GFP_DMA32|GFP_DMA);
-
-			if (dma_ops->alloc_coherent)
-				return dma_ops->alloc_coherent(dev, size,
-							   dma_handle, gfp);
-			return NULL;
-		}
-
-		memset(memory, 0, size);
-		if (!mmu) {
-			*dma_handle = virt_to_bus(memory);
-			return memory;
-		}
-	}
-
-	if (dma_ops->alloc_coherent) {
-		free_pages((unsigned long)memory, get_order(size));
-		gfp &= ~(GFP_DMA|GFP_DMA32);
-		return dma_ops->alloc_coherent(dev, size, dma_handle, gfp);
-	}
-
-	if (dma_ops->map_simple) {
-		*dma_handle = dma_ops->map_simple(dev, memory,
-					      size,
-					      PCI_DMA_BIDIRECTIONAL);
-		if (*dma_handle != bad_dma_address)
-			return memory;
-	}
-
-	if (panic_on_overflow)
-		panic("dma_alloc_coherent: IOMMU overflow by %lu bytes\n",size);
-	free_pages((unsigned long)memory, get_order(size));
-	return NULL;
-}
-EXPORT_SYMBOL(dma_alloc_coherent);
-
-/*
- * Unmap coherent memory.
- * The caller must ensure that the device has finished accessing the mapping.
- */
-void dma_free_coherent(struct device *dev, size_t size,
-			 void *vaddr, dma_addr_t bus)
-{
-	if (dma_ops->unmap_single)
-		dma_ops->unmap_single(dev, bus, size, 0);
-	free_pages((unsigned long)vaddr, get_order(size));
-}
-EXPORT_SYMBOL(dma_free_coherent);
-
-static int forbid_dac __read_mostly;
-
-int dma_supported(struct device *dev, u64 mask)
-{
-#ifdef CONFIG_PCI
-	if (mask > 0xffffffff && forbid_dac > 0) {
-
-
-
-		printk(KERN_INFO "PCI: Disallowing DAC for device %s\n", dev->bus_id);
-		return 0;
-	}
-#endif
-
-	if (dma_ops->dma_supported)
-		return dma_ops->dma_supported(dev, mask);
-
-	/* Copied from i386. Doesn't make much sense, because it will
-	   only work for pci_alloc_coherent.
-	   The caller just has to use GFP_DMA in this case. */
-        if (mask < DMA_24BIT_MASK)
-                return 0;
-
-	/* Tell the device to use SAC when IOMMU force is on.  This
-	   allows the driver to use cheaper accesses in some cases.
-
-	   Problem with this is that if we overflow the IOMMU area and
-	   return DAC as fallback address the device may not handle it
-	   correctly.
-
-	   As a special case some controllers have a 39bit address
-	   mode that is as efficient as 32bit (aic79xx). Don't force
-	   SAC for these.  Assume all masks <= 40 bits are of this
-	   type. Normally this doesn't make any difference, but gives
-	   more gentle handling of IOMMU overflow. */
-	if (iommu_sac_force && (mask >= DMA_40BIT_MASK)) {
-		printk(KERN_INFO "%s: Force SAC with mask %Lx\n", dev->bus_id,mask);
-		return 0;
-	}
-
-	return 1;
-}
-EXPORT_SYMBOL(dma_supported);
-
-int dma_set_mask(struct device *dev, u64 mask)
-{
-	if (!dev->dma_mask || !dma_supported(dev, mask))
-		return -EIO;
-	*dev->dma_mask = mask;
-	return 0;
-}
-EXPORT_SYMBOL(dma_set_mask);
-
-/*
- * See <Documentation/x86_64/boot-options.txt> for the iommu kernel parameter
- * documentation.
- */
-__init int iommu_setup(char *p)
-{
-	iommu_merge = 1;
-
-	if (!p)
-		return -EINVAL;
-
-	while (*p) {
-		if (!strncmp(p,"off",3))
-			no_iommu = 1;
-		/* gart_parse_options has more force support */
-		if (!strncmp(p,"force",5))
-			force_iommu = 1;
-		if (!strncmp(p,"noforce",7)) {
-			iommu_merge = 0;
-			force_iommu = 0;
-		}
-
-		if (!strncmp(p, "biomerge",8)) {
-			iommu_bio_merge = 4096;
-			iommu_merge = 1;
-			force_iommu = 1;
-		}
-		if (!strncmp(p, "panic",5))
-			panic_on_overflow = 1;
-		if (!strncmp(p, "nopanic",7))
-			panic_on_overflow = 0;
-		if (!strncmp(p, "merge",5)) {
-			iommu_merge = 1;
-			force_iommu = 1;
-		}
-		if (!strncmp(p, "nomerge",7))
-			iommu_merge = 0;
-		if (!strncmp(p, "forcesac",8))
-			iommu_sac_force = 1;
-		if (!strncmp(p, "allowdac", 8))
-			forbid_dac = 0;
-		if (!strncmp(p, "nodac", 5))
-			forbid_dac = -1;
-
-#ifdef CONFIG_SWIOTLB
-		if (!strncmp(p, "soft",4))
-			swiotlb = 1;
-#endif
-
-#ifdef CONFIG_IOMMU
-		gart_parse_options(p);
-#endif
-
-#ifdef CONFIG_CALGARY_IOMMU
-		if (!strncmp(p, "calgary", 7))
-			use_calgary = 1;
-#endif /* CONFIG_CALGARY_IOMMU */
-
-		p += strcspn(p, ",");
-		if (*p == ',')
-			++p;
-	}
-	return 0;
-}
-early_param("iommu", iommu_setup);
-
-void __init pci_iommu_alloc(void)
-{
-	/*
-	 * The order of these functions is important for
-	 * fall-back/fail-over reasons
-	 */
-#ifdef CONFIG_IOMMU
-	iommu_hole_init();
-#endif
-
-#ifdef CONFIG_CALGARY_IOMMU
-	detect_calgary();
-#endif
-
-#ifdef CONFIG_SWIOTLB
-	pci_swiotlb_init();
-#endif
-}
-
-static int __init pci_iommu_init(void)
-{
-#ifdef CONFIG_CALGARY_IOMMU
-	calgary_iommu_init();
-#endif
-
-#ifdef CONFIG_IOMMU
-	gart_iommu_init();
-#endif
-
-	no_iommu_init();
-	return 0;
-}
-
-void pci_iommu_shutdown(void)
-{
-	gart_iommu_shutdown();
-}
-
-#ifdef CONFIG_PCI
-/* Many VIA bridges seem to corrupt data for DAC. Disable it here */
-
-static __devinit void via_no_dac(struct pci_dev *dev)
-{
-	if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI && forbid_dac == 0) {
-		printk(KERN_INFO "PCI: VIA PCI bridge detected. Disabling DAC.\n");
-		forbid_dac = 1;
-	}
-}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_ANY_ID, via_no_dac);
-#endif
-/* Must execute after PCI subsystem */
-fs_initcall(pci_iommu_init);
diff --git a/arch/x86_64/kernel/pci-gart_64.c b/arch/x86_64/kernel/pci-gart_64.c
deleted file mode 100644
index 4918c57..0000000
--- a/arch/x86_64/kernel/pci-gart_64.c
+++ /dev/null
@@ -1,740 +0,0 @@
-/*
- * Dynamic DMA mapping support for AMD Hammer.
- * 
- * Use the integrated AGP GART in the Hammer northbridge as an IOMMU for PCI.
- * This allows to use PCI devices that only support 32bit addresses on systems
- * with more than 4GB. 
- *
- * See Documentation/DMA-mapping.txt for the interface specification.
- * 
- * Copyright 2002 Andi Kleen, SuSE Labs.
- */
-
-#include <linux/types.h>
-#include <linux/ctype.h>
-#include <linux/agp_backend.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/string.h>
-#include <linux/spinlock.h>
-#include <linux/pci.h>
-#include <linux/module.h>
-#include <linux/topology.h>
-#include <linux/interrupt.h>
-#include <linux/bitops.h>
-#include <linux/kdebug.h>
-#include <asm/atomic.h>
-#include <asm/io.h>
-#include <asm/mtrr.h>
-#include <asm/pgtable.h>
-#include <asm/proto.h>
-#include <asm/iommu.h>
-#include <asm/cacheflush.h>
-#include <asm/swiotlb.h>
-#include <asm/dma.h>
-#include <asm/k8.h>
-
-unsigned long iommu_bus_base;	/* GART remapping area (physical) */
-static unsigned long iommu_size; 	/* size of remapping area bytes */
-static unsigned long iommu_pages;	/* .. and in pages */
-
-u32 *iommu_gatt_base; 		/* Remapping table */
-
-/* If this is disabled the IOMMU will use an optimized flushing strategy
-   of only flushing when an mapping is reused. With it true the GART is flushed 
-   for every mapping. Problem is that doing the lazy flush seems to trigger
-   bugs with some popular PCI cards, in particular 3ware (but has been also
-   also seen with Qlogic at least). */
-int iommu_fullflush = 1;
-
-/* Allocation bitmap for the remapping area */ 
-static DEFINE_SPINLOCK(iommu_bitmap_lock);
-static unsigned long *iommu_gart_bitmap; /* guarded by iommu_bitmap_lock */
-
-static u32 gart_unmapped_entry; 
-
-#define GPTE_VALID    1
-#define GPTE_COHERENT 2
-#define GPTE_ENCODE(x) \
-	(((x) & 0xfffff000) | (((x) >> 32) << 4) | GPTE_VALID | GPTE_COHERENT)
-#define GPTE_DECODE(x) (((x) & 0xfffff000) | (((u64)(x) & 0xff0) << 28))
-
-#define to_pages(addr,size) \
-	(round_up(((addr) & ~PAGE_MASK) + (size), PAGE_SIZE) >> PAGE_SHIFT)
-
-#define EMERGENCY_PAGES 32 /* = 128KB */ 
-
-#ifdef CONFIG_AGP
-#define AGPEXTERN extern
-#else
-#define AGPEXTERN
-#endif
-
-/* backdoor interface to AGP driver */
-AGPEXTERN int agp_memory_reserved;
-AGPEXTERN __u32 *agp_gatt_table;
-
-static unsigned long next_bit;  /* protected by iommu_bitmap_lock */
-static int need_flush; 		/* global flush state. set for each gart wrap */
-
-static unsigned long alloc_iommu(int size) 
-{ 	
-	unsigned long offset, flags;
-
-	spin_lock_irqsave(&iommu_bitmap_lock, flags);	
-	offset = find_next_zero_string(iommu_gart_bitmap,next_bit,iommu_pages,size);
-	if (offset == -1) {
-		need_flush = 1;
-		offset = find_next_zero_string(iommu_gart_bitmap,0,iommu_pages,size);
-	}
-	if (offset != -1) { 
-		set_bit_string(iommu_gart_bitmap, offset, size); 
-		next_bit = offset+size; 
-		if (next_bit >= iommu_pages) { 
-			next_bit = 0;
-			need_flush = 1;
-		} 
-	} 
-	if (iommu_fullflush)
-		need_flush = 1;
-	spin_unlock_irqrestore(&iommu_bitmap_lock, flags);      
-	return offset;
-} 
-
-static void free_iommu(unsigned long offset, int size)
-{ 
-	unsigned long flags;
-	spin_lock_irqsave(&iommu_bitmap_lock, flags);
-	__clear_bit_string(iommu_gart_bitmap, offset, size);
-	spin_unlock_irqrestore(&iommu_bitmap_lock, flags);
-} 
-
-/* 
- * Use global flush state to avoid races with multiple flushers.
- */
-static void flush_gart(void)
-{ 
-	unsigned long flags;
-	spin_lock_irqsave(&iommu_bitmap_lock, flags);
-	if (need_flush) {
-		k8_flush_garts();
-		need_flush = 0;
-	} 
-	spin_unlock_irqrestore(&iommu_bitmap_lock, flags);
-} 
-
-#ifdef CONFIG_IOMMU_LEAK
-
-#define SET_LEAK(x) if (iommu_leak_tab) \
-			iommu_leak_tab[x] = __builtin_return_address(0);
-#define CLEAR_LEAK(x) if (iommu_leak_tab) \
-			iommu_leak_tab[x] = NULL;
-
-/* Debugging aid for drivers that don't free their IOMMU tables */
-static void **iommu_leak_tab; 
-static int leak_trace;
-int iommu_leak_pages = 20; 
-void dump_leak(void)
-{
-	int i;
-	static int dump; 
-	if (dump || !iommu_leak_tab) return;
-	dump = 1;
-	show_stack(NULL,NULL);
-	/* Very crude. dump some from the end of the table too */ 
-	printk("Dumping %d pages from end of IOMMU:\n", iommu_leak_pages); 
-	for (i = 0; i < iommu_leak_pages; i+=2) {
-		printk("%lu: ", iommu_pages-i);
-		printk_address((unsigned long) iommu_leak_tab[iommu_pages-i]);
-		printk("%c", (i+1)%2 == 0 ? '\n' : ' '); 
-	} 
-	printk("\n");
-}
-#else
-#define SET_LEAK(x)
-#define CLEAR_LEAK(x)
-#endif
-
-static void iommu_full(struct device *dev, size_t size, int dir)
-{
-	/* 
-	 * Ran out of IOMMU space for this operation. This is very bad.
-	 * Unfortunately the drivers cannot handle this operation properly.
-	 * Return some non mapped prereserved space in the aperture and 
-	 * let the Northbridge deal with it. This will result in garbage
-	 * in the IO operation. When the size exceeds the prereserved space
-	 * memory corruption will occur or random memory will be DMAed 
-	 * out. Hopefully no network devices use single mappings that big.
-	 */ 
-	
-	printk(KERN_ERR 
-  "PCI-DMA: Out of IOMMU space for %lu bytes at device %s\n",
-	       size, dev->bus_id);
-
-	if (size > PAGE_SIZE*EMERGENCY_PAGES) {
-		if (dir == PCI_DMA_FROMDEVICE || dir == PCI_DMA_BIDIRECTIONAL)
-			panic("PCI-DMA: Memory would be corrupted\n");
-		if (dir == PCI_DMA_TODEVICE || dir == PCI_DMA_BIDIRECTIONAL) 
-			panic(KERN_ERR "PCI-DMA: Random memory would be DMAed\n");
-	} 
-
-#ifdef CONFIG_IOMMU_LEAK
-	dump_leak(); 
-#endif
-} 
-
-static inline int need_iommu(struct device *dev, unsigned long addr, size_t size)
-{ 
-	u64 mask = *dev->dma_mask;
-	int high = addr + size > mask;
-	int mmu = high;
-	if (force_iommu) 
-		mmu = 1; 
-	return mmu; 
-}
-
-static inline int nonforced_iommu(struct device *dev, unsigned long addr, size_t size)
-{ 
-	u64 mask = *dev->dma_mask;
-	int high = addr + size > mask;
-	int mmu = high;
-	return mmu; 
-}
-
-/* Map a single continuous physical area into the IOMMU.
- * Caller needs to check if the iommu is needed and flush.
- */
-static dma_addr_t dma_map_area(struct device *dev, dma_addr_t phys_mem,
-				size_t size, int dir)
-{ 
-	unsigned long npages = to_pages(phys_mem, size);
-	unsigned long iommu_page = alloc_iommu(npages);
-	int i;
-	if (iommu_page == -1) {
-		if (!nonforced_iommu(dev, phys_mem, size))
-			return phys_mem; 
-		if (panic_on_overflow)
-			panic("dma_map_area overflow %lu bytes\n", size);
-		iommu_full(dev, size, dir);
-		return bad_dma_address;
-	}
-
-	for (i = 0; i < npages; i++) {
-		iommu_gatt_base[iommu_page + i] = GPTE_ENCODE(phys_mem);
-		SET_LEAK(iommu_page + i);
-		phys_mem += PAGE_SIZE;
-	}
-	return iommu_bus_base + iommu_page*PAGE_SIZE + (phys_mem & ~PAGE_MASK);
-}
-
-static dma_addr_t gart_map_simple(struct device *dev, char *buf,
-				 size_t size, int dir)
-{
-	dma_addr_t map = dma_map_area(dev, virt_to_bus(buf), size, dir);
-	flush_gart();
-	return map;
-}
-
-/* Map a single area into the IOMMU */
-static dma_addr_t gart_map_single(struct device *dev, void *addr, size_t size, int dir)
-{
-	unsigned long phys_mem, bus;
-
-	if (!dev)
-		dev = &fallback_dev;
-
-	phys_mem = virt_to_phys(addr); 
-	if (!need_iommu(dev, phys_mem, size))
-		return phys_mem; 
-
-	bus = gart_map_simple(dev, addr, size, dir);
-	return bus; 
-}
-
-/*
- * Free a DMA mapping.
- */
-static void gart_unmap_single(struct device *dev, dma_addr_t dma_addr,
-		      size_t size, int direction)
-{
-	unsigned long iommu_page;
-	int npages;
-	int i;
-
-	if (dma_addr < iommu_bus_base + EMERGENCY_PAGES*PAGE_SIZE ||
-	    dma_addr >= iommu_bus_base + iommu_size)
-		return;
-	iommu_page = (dma_addr - iommu_bus_base)>>PAGE_SHIFT;
-	npages = to_pages(dma_addr, size);
-	for (i = 0; i < npages; i++) {
-		iommu_gatt_base[iommu_page + i] = gart_unmapped_entry;
-		CLEAR_LEAK(iommu_page + i);
-	}
-	free_iommu(iommu_page, npages);
-}
-
-/*
- * Wrapper for pci_unmap_single working with scatterlists.
- */
-static void gart_unmap_sg(struct device *dev, struct scatterlist *sg, int nents, int dir)
-{
-	int i;
-
-	for (i = 0; i < nents; i++) {
-		struct scatterlist *s = &sg[i];
-		if (!s->dma_length || !s->length)
-			break;
-		gart_unmap_single(dev, s->dma_address, s->dma_length, dir);
-	}
-}
-
-/* Fallback for dma_map_sg in case of overflow */
-static int dma_map_sg_nonforce(struct device *dev, struct scatterlist *sg,
-			       int nents, int dir)
-{
-	int i;
-
-#ifdef CONFIG_IOMMU_DEBUG
-	printk(KERN_DEBUG "dma_map_sg overflow\n");
-#endif
-
- 	for (i = 0; i < nents; i++ ) {
-		struct scatterlist *s = &sg[i];
-		unsigned long addr = page_to_phys(s->page) + s->offset; 
-		if (nonforced_iommu(dev, addr, s->length)) { 
-			addr = dma_map_area(dev, addr, s->length, dir);
-			if (addr == bad_dma_address) { 
-				if (i > 0) 
-					gart_unmap_sg(dev, sg, i, dir);
-				nents = 0; 
-				sg[0].dma_length = 0;
-				break;
-			}
-		}
-		s->dma_address = addr;
-		s->dma_length = s->length;
-	}
-	flush_gart();
-	return nents;
-}
-
-/* Map multiple scatterlist entries continuous into the first. */
-static int __dma_map_cont(struct scatterlist *sg, int start, int stopat,
-		      struct scatterlist *sout, unsigned long pages)
-{
-	unsigned long iommu_start = alloc_iommu(pages);
-	unsigned long iommu_page = iommu_start; 
-	int i;
-
-	if (iommu_start == -1)
-		return -1;
-	
-	for (i = start; i < stopat; i++) {
-		struct scatterlist *s = &sg[i];
-		unsigned long pages, addr;
-		unsigned long phys_addr = s->dma_address;
-		
-		BUG_ON(i > start && s->offset);
-		if (i == start) {
-			*sout = *s; 
-			sout->dma_address = iommu_bus_base;
-			sout->dma_address += iommu_page*PAGE_SIZE + s->offset;
-			sout->dma_length = s->length;
-		} else { 
-			sout->dma_length += s->length; 
-		}
-
-		addr = phys_addr;
-		pages = to_pages(s->offset, s->length); 
-		while (pages--) { 
-			iommu_gatt_base[iommu_page] = GPTE_ENCODE(addr); 
-			SET_LEAK(iommu_page);
-			addr += PAGE_SIZE;
-			iommu_page++;
-		}
-	} 
-	BUG_ON(iommu_page - iommu_start != pages);	
-	return 0;
-}
-
-static inline int dma_map_cont(struct scatterlist *sg, int start, int stopat,
-		      struct scatterlist *sout,
-		      unsigned long pages, int need)
-{
-	if (!need) { 
-		BUG_ON(stopat - start != 1);
-		*sout = sg[start]; 
-		sout->dma_length = sg[start].length; 
-		return 0;
-	} 
-	return __dma_map_cont(sg, start, stopat, sout, pages);
-}
-		
-/*
- * DMA map all entries in a scatterlist.
- * Merge chunks that have page aligned sizes into a continuous mapping. 
- */
-int gart_map_sg(struct device *dev, struct scatterlist *sg, int nents, int dir)
-{
-	int i;
-	int out;
-	int start;
-	unsigned long pages = 0;
-	int need = 0, nextneed;
-
-	if (nents == 0) 
-		return 0;
-
-	if (!dev)
-		dev = &fallback_dev;
-
-	out = 0;
-	start = 0;
-	for (i = 0; i < nents; i++) {
-		struct scatterlist *s = &sg[i];
-		dma_addr_t addr = page_to_phys(s->page) + s->offset;
-		s->dma_address = addr;
-		BUG_ON(s->length == 0); 
-
-		nextneed = need_iommu(dev, addr, s->length); 
-
-		/* Handle the previous not yet processed entries */
-		if (i > start) {
-			struct scatterlist *ps = &sg[i-1];
-			/* Can only merge when the last chunk ends on a page 
-			   boundary and the new one doesn't have an offset. */
-			if (!iommu_merge || !nextneed || !need || s->offset ||
-			    (ps->offset + ps->length) % PAGE_SIZE) { 
-				if (dma_map_cont(sg, start, i, sg+out, pages,
-						 need) < 0)
-					goto error;
-				out++;
-				pages = 0;
-				start = i;	
-			}
-		}
-
-		need = nextneed;
-		pages += to_pages(s->offset, s->length);
-	}
-	if (dma_map_cont(sg, start, i, sg+out, pages, need) < 0)
-		goto error;
-	out++;
-	flush_gart();
-	if (out < nents) 
-		sg[out].dma_length = 0; 
-	return out;
-
-error:
-	flush_gart();
-	gart_unmap_sg(dev, sg, nents, dir);
-	/* When it was forced or merged try again in a dumb way */
-	if (force_iommu || iommu_merge) {
-		out = dma_map_sg_nonforce(dev, sg, nents, dir);
-		if (out > 0)
-			return out;
-	}
-	if (panic_on_overflow)
-		panic("dma_map_sg: overflow on %lu pages\n", pages);
-	iommu_full(dev, pages << PAGE_SHIFT, dir);
-	for (i = 0; i < nents; i++)
-		sg[i].dma_address = bad_dma_address;
-	return 0;
-} 
-
-static int no_agp;
-
-static __init unsigned long check_iommu_size(unsigned long aper, u64 aper_size)
-{ 
-	unsigned long a; 
-	if (!iommu_size) { 
-		iommu_size = aper_size; 
-		if (!no_agp) 
-			iommu_size /= 2; 
-	} 
-
-	a = aper + iommu_size; 
-	iommu_size -= round_up(a, LARGE_PAGE_SIZE) - a;
-
-	if (iommu_size < 64*1024*1024) 
-		printk(KERN_WARNING
-  "PCI-DMA: Warning: Small IOMMU %luMB. Consider increasing the AGP aperture in BIOS\n",iommu_size>>20); 
-	
-	return iommu_size;
-} 
-
-static __init unsigned read_aperture(struct pci_dev *dev, u32 *size) 
-{ 
-	unsigned aper_size = 0, aper_base_32;
-	u64 aper_base;
-	unsigned aper_order;
-
-	pci_read_config_dword(dev, 0x94, &aper_base_32); 
-	pci_read_config_dword(dev, 0x90, &aper_order);
-	aper_order = (aper_order >> 1) & 7;	
-
-	aper_base = aper_base_32 & 0x7fff; 
-	aper_base <<= 25;
-
-	aper_size = (32 * 1024 * 1024) << aper_order; 
-       if (aper_base + aper_size > 0x100000000UL || !aper_size)
-		aper_base = 0;
-
-	*size = aper_size;
-	return aper_base;
-} 
-
-/* 
- * Private Northbridge GATT initialization in case we cannot use the
- * AGP driver for some reason.  
- */
-static __init int init_k8_gatt(struct agp_kern_info *info)
-{ 
-	struct pci_dev *dev;
-	void *gatt;
-	unsigned aper_base, new_aper_base;
-	unsigned aper_size, gatt_size, new_aper_size;
-	int i;
-
-	printk(KERN_INFO "PCI-DMA: Disabling AGP.\n");
-	aper_size = aper_base = info->aper_size = 0;
-	dev = NULL;
-	for (i = 0; i < num_k8_northbridges; i++) {
-		dev = k8_northbridges[i];
-		new_aper_base = read_aperture(dev, &new_aper_size); 
-		if (!new_aper_base) 
-			goto nommu; 
-		
-		if (!aper_base) { 
-			aper_size = new_aper_size;
-			aper_base = new_aper_base;
-		} 
-		if (aper_size != new_aper_size || aper_base != new_aper_base) 
-			goto nommu;
-	}
-	if (!aper_base)
-		goto nommu; 
-	info->aper_base = aper_base;
-	info->aper_size = aper_size>>20; 
-
-	gatt_size = (aper_size >> PAGE_SHIFT) * sizeof(u32); 
-	gatt = (void *)__get_free_pages(GFP_KERNEL, get_order(gatt_size)); 
-	if (!gatt) 
-		panic("Cannot allocate GATT table");
-	if (change_page_attr_addr((unsigned long)gatt, gatt_size >> PAGE_SHIFT, PAGE_KERNEL_NOCACHE))
-		panic("Could not set GART PTEs to uncacheable pages");
-	global_flush_tlb();
-
-	memset(gatt, 0, gatt_size); 
-	agp_gatt_table = gatt;
-
-	for (i = 0; i < num_k8_northbridges; i++) {
-		u32 ctl; 
-		u32 gatt_reg; 
-
-		dev = k8_northbridges[i];
-		gatt_reg = __pa(gatt) >> 12; 
-		gatt_reg <<= 4; 
-		pci_write_config_dword(dev, 0x98, gatt_reg);
-		pci_read_config_dword(dev, 0x90, &ctl); 
-
-		ctl |= 1;
-		ctl &= ~((1<<4) | (1<<5));
-
-		pci_write_config_dword(dev, 0x90, ctl); 
-	}
-	flush_gart();
-	
-	printk("PCI-DMA: aperture base @ %x size %u KB\n",aper_base, aper_size>>10); 
-	return 0;
-
- nommu:
- 	/* Should not happen anymore */
-	printk(KERN_ERR "PCI-DMA: More than 4GB of RAM and no IOMMU\n"
-	       KERN_ERR "PCI-DMA: 32bit PCI IO may malfunction.\n");
-	return -1; 
-} 
-
-extern int agp_amd64_init(void);
-
-static const struct dma_mapping_ops gart_dma_ops = {
-	.mapping_error = NULL,
-	.map_single = gart_map_single,
-	.map_simple = gart_map_simple,
-	.unmap_single = gart_unmap_single,
-	.sync_single_for_cpu = NULL,
-	.sync_single_for_device = NULL,
-	.sync_single_range_for_cpu = NULL,
-	.sync_single_range_for_device = NULL,
-	.sync_sg_for_cpu = NULL,
-	.sync_sg_for_device = NULL,
-	.map_sg = gart_map_sg,
-	.unmap_sg = gart_unmap_sg,
-};
-
-void gart_iommu_shutdown(void)
-{
-	struct pci_dev *dev;
-	int i;
-
-	if (no_agp && (dma_ops != &gart_dma_ops))
-		return;
-
-        for (i = 0; i < num_k8_northbridges; i++) {
-                u32 ctl;
-
-                dev = k8_northbridges[i];
-                pci_read_config_dword(dev, 0x90, &ctl);
-
-                ctl &= ~1;
-
-                pci_write_config_dword(dev, 0x90, ctl);
-        }
-}
-
-void __init gart_iommu_init(void)
-{ 
-	struct agp_kern_info info;
-	unsigned long aper_size;
-	unsigned long iommu_start;
-	unsigned long scratch;
-	long i;
-
-	if (cache_k8_northbridges() < 0 || num_k8_northbridges == 0) {
-		printk(KERN_INFO "PCI-GART: No AMD northbridge found.\n");
-		return;
-	}
-
-#ifndef CONFIG_AGP_AMD64
-	no_agp = 1; 
-#else
-	/* Makefile puts PCI initialization via subsys_initcall first. */
-	/* Add other K8 AGP bridge drivers here */
-	no_agp = no_agp || 
-		(agp_amd64_init() < 0) || 
-		(agp_copy_info(agp_bridge, &info) < 0);
-#endif	
-
-	if (swiotlb)
-		return;
-
-	/* Did we detect a different HW IOMMU? */
-	if (iommu_detected && !iommu_aperture)
-		return;
-
-	if (no_iommu ||
-	    (!force_iommu && end_pfn <= MAX_DMA32_PFN) ||
-	    !iommu_aperture ||
-	    (no_agp && init_k8_gatt(&info) < 0)) {
-		if (end_pfn > MAX_DMA32_PFN) {
-			printk(KERN_ERR "WARNING more than 4GB of memory "
-					"but GART IOMMU not available.\n"
-			       KERN_ERR "WARNING 32bit PCI may malfunction.\n");
-		}
-		return;
-	}
-
-	printk(KERN_INFO "PCI-DMA: using GART IOMMU.\n");
-	aper_size = info.aper_size * 1024 * 1024;	
-	iommu_size = check_iommu_size(info.aper_base, aper_size); 
-	iommu_pages = iommu_size >> PAGE_SHIFT; 
-
-	iommu_gart_bitmap = (void*)__get_free_pages(GFP_KERNEL, 
-						    get_order(iommu_pages/8)); 
-	if (!iommu_gart_bitmap) 
-		panic("Cannot allocate iommu bitmap\n"); 
-	memset(iommu_gart_bitmap, 0, iommu_pages/8);
-
-#ifdef CONFIG_IOMMU_LEAK
-	if (leak_trace) { 
-		iommu_leak_tab = (void *)__get_free_pages(GFP_KERNEL, 
-				  get_order(iommu_pages*sizeof(void *)));
-		if (iommu_leak_tab) 
-			memset(iommu_leak_tab, 0, iommu_pages * 8); 
-		else
-			printk("PCI-DMA: Cannot allocate leak trace area\n"); 
-	} 
-#endif
-
-	/* 
-	 * Out of IOMMU space handling.
-	 * Reserve some invalid pages at the beginning of the GART. 
-	 */ 
-	set_bit_string(iommu_gart_bitmap, 0, EMERGENCY_PAGES); 
-
-	agp_memory_reserved = iommu_size;	
-	printk(KERN_INFO
-	       "PCI-DMA: Reserving %luMB of IOMMU area in the AGP aperture\n",
-	       iommu_size>>20); 
-
-	iommu_start = aper_size - iommu_size;	
-	iommu_bus_base = info.aper_base + iommu_start; 
-	bad_dma_address = iommu_bus_base;
-	iommu_gatt_base = agp_gatt_table + (iommu_start>>PAGE_SHIFT);
-
-	/* 
-	 * Unmap the IOMMU part of the GART. The alias of the page is
-	 * always mapped with cache enabled and there is no full cache
-	 * coherency across the GART remapping. The unmapping avoids
-	 * automatic prefetches from the CPU allocating cache lines in
-	 * there. All CPU accesses are done via the direct mapping to
-	 * the backing memory. The GART address is only used by PCI
-	 * devices. 
-	 */
-	clear_kernel_mapping((unsigned long)__va(iommu_bus_base), iommu_size);
-
-	/* 
-	 * Try to workaround a bug (thanks to BenH) 
-	 * Set unmapped entries to a scratch page instead of 0. 
-	 * Any prefetches that hit unmapped entries won't get an bus abort
-	 * then.
-	 */
-	scratch = get_zeroed_page(GFP_KERNEL); 
-	if (!scratch) 
-		panic("Cannot allocate iommu scratch page");
-	gart_unmapped_entry = GPTE_ENCODE(__pa(scratch));
-	for (i = EMERGENCY_PAGES; i < iommu_pages; i++) 
-		iommu_gatt_base[i] = gart_unmapped_entry;
-
-	flush_gart();
-	dma_ops = &gart_dma_ops;
-} 
-
-void __init gart_parse_options(char *p)
-{
-	int arg;
-
-#ifdef CONFIG_IOMMU_LEAK
-	if (!strncmp(p,"leak",4)) {
-		leak_trace = 1;
-		p += 4;
-		if (*p == '=') ++p;
-		if (isdigit(*p) && get_option(&p, &arg))
-			iommu_leak_pages = arg;
-	}
-#endif
-	if (isdigit(*p) && get_option(&p, &arg))
-		iommu_size = arg;
-	if (!strncmp(p, "fullflush",8))
-		iommu_fullflush = 1;
-	if (!strncmp(p, "nofullflush",11))
-		iommu_fullflush = 0;
-	if (!strncmp(p,"noagp",5))
-		no_agp = 1;
-	if (!strncmp(p, "noaperture",10))
-		fix_aperture = 0;
-	/* duplicated from pci-dma.c */
-	if (!strncmp(p,"force",5))
-		iommu_aperture_allowed = 1;
-	if (!strncmp(p,"allowed",7))
-		iommu_aperture_allowed = 1;
-	if (!strncmp(p, "memaper", 7)) {
-		fallback_aper_force = 1;
-		p += 7;
-		if (*p == '=') {
-			++p;
-			if (get_option(&p, &arg))
-				fallback_aper_order = arg;
-		}
-	}
-}
diff --git a/arch/x86_64/kernel/pci-nommu_64.c b/arch/x86_64/kernel/pci-nommu_64.c
deleted file mode 100644
index 2a34c6c..0000000
--- a/arch/x86_64/kernel/pci-nommu_64.c
+++ /dev/null
@@ -1,97 +0,0 @@
-/* Fallback functions when the main IOMMU code is not compiled in. This
-   code is roughly equivalent to i386. */
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/string.h>
-#include <linux/dma-mapping.h>
-
-#include <asm/iommu.h>
-#include <asm/processor.h>
-#include <asm/dma.h>
-
-static int
-check_addr(char *name, struct device *hwdev, dma_addr_t bus, size_t size)
-{
-        if (hwdev && bus + size > *hwdev->dma_mask) {
-		if (*hwdev->dma_mask >= DMA_32BIT_MASK)
-			printk(KERN_ERR
-			    "nommu_%s: overflow %Lx+%zu of device mask %Lx\n",
-				name, (long long)bus, size,
-				(long long)*hwdev->dma_mask);
-		return 0;
-	}
-	return 1;
-}
-
-static dma_addr_t
-nommu_map_single(struct device *hwdev, void *ptr, size_t size,
-	       int direction)
-{
-	dma_addr_t bus = virt_to_bus(ptr);
-	if (!check_addr("map_single", hwdev, bus, size))
-				return bad_dma_address;
-	return bus;
-}
-
-static void nommu_unmap_single(struct device *dev, dma_addr_t addr,size_t size,
-			int direction)
-{
-}
-
-/* Map a set of buffers described by scatterlist in streaming
- * mode for DMA.  This is the scatter-gather version of the
- * above pci_map_single interface.  Here the scatter gather list
- * elements are each tagged with the appropriate dma address
- * and length.  They are obtained via sg_dma_{address,length}(SG).
- *
- * NOTE: An implementation may be able to use a smaller number of
- *       DMA address/length pairs than there are SG table elements.
- *       (for example via virtual mapping capabilities)
- *       The routine returns the number of addr/length pairs actually
- *       used, at most nents.
- *
- * Device ownership issues as mentioned above for pci_map_single are
- * the same here.
- */
-static int nommu_map_sg(struct device *hwdev, struct scatterlist *sg,
-	       int nents, int direction)
-{
-	int i;
-
- 	for (i = 0; i < nents; i++ ) {
-		struct scatterlist *s = &sg[i];
-		BUG_ON(!s->page);
-		s->dma_address = virt_to_bus(page_address(s->page) +s->offset);
-		if (!check_addr("map_sg", hwdev, s->dma_address, s->length))
-			return 0;
-		s->dma_length = s->length;
-	}
-	return nents;
-}
-
-/* Unmap a set of streaming mode DMA translations.
- * Again, cpu read rules concerning calls here are the same as for
- * pci_unmap_single() above.
- */
-static void nommu_unmap_sg(struct device *dev, struct scatterlist *sg,
-		  int nents, int dir)
-{
-}
-
-const struct dma_mapping_ops nommu_dma_ops = {
-	.map_single = nommu_map_single,
-	.unmap_single = nommu_unmap_single,
-	.map_sg = nommu_map_sg,
-	.unmap_sg = nommu_unmap_sg,
-	.is_phys = 1,
-};
-
-void __init no_iommu_init(void)
-{
-	if (dma_ops)
-		return;
-
-	force_iommu = 0; /* no HW IOMMU */
-	dma_ops = &nommu_dma_ops;
-}
diff --git a/arch/x86_64/kernel/pci-swiotlb_64.c b/arch/x86_64/kernel/pci-swiotlb_64.c
deleted file mode 100644
index b2f405e..0000000
--- a/arch/x86_64/kernel/pci-swiotlb_64.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/* Glue code to lib/swiotlb.c */
-
-#include <linux/pci.h>
-#include <linux/cache.h>
-#include <linux/module.h>
-#include <linux/dma-mapping.h>
-
-#include <asm/iommu.h>
-#include <asm/swiotlb.h>
-#include <asm/dma.h>
-
-int swiotlb __read_mostly;
-EXPORT_SYMBOL(swiotlb);
-
-const struct dma_mapping_ops swiotlb_dma_ops = {
-	.mapping_error = swiotlb_dma_mapping_error,
-	.alloc_coherent = swiotlb_alloc_coherent,
-	.free_coherent = swiotlb_free_coherent,
-	.map_single = swiotlb_map_single,
-	.unmap_single = swiotlb_unmap_single,
-	.sync_single_for_cpu = swiotlb_sync_single_for_cpu,
-	.sync_single_for_device = swiotlb_sync_single_for_device,
-	.sync_single_range_for_cpu = swiotlb_sync_single_range_for_cpu,
-	.sync_single_range_for_device = swiotlb_sync_single_range_for_device,
-	.sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
-	.sync_sg_for_device = swiotlb_sync_sg_for_device,
-	.map_sg = swiotlb_map_sg,
-	.unmap_sg = swiotlb_unmap_sg,
-	.dma_supported = NULL,
-};
-
-void __init pci_swiotlb_init(void)
-{
-	/* don't initialize swiotlb if iommu=off (no_iommu=1) */
-	if (!iommu_detected && !no_iommu && end_pfn > MAX_DMA32_PFN)
-	       swiotlb = 1;
-	if (swiotlb_force)
-		swiotlb = 1;
-	if (swiotlb) {
-		printk(KERN_INFO "PCI-DMA: Using software bounce buffering for IO (SWIOTLB)\n");
-		swiotlb_init();
-		dma_ops = &swiotlb_dma_ops;
-	}
-}
diff --git a/arch/x86_64/kernel/pmtimer_64.c b/arch/x86_64/kernel/pmtimer_64.c
deleted file mode 100644
index ae8f912..0000000
--- a/arch/x86_64/kernel/pmtimer_64.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/* Ported over from i386 by AK, original copyright was:
- *
- * (C) Dominik Brodowski <linux@brodo.de> 2003
- *
- * Driver to use the Power Management Timer (PMTMR) available in some
- * southbridges as primary timing source for the Linux kernel.
- *
- * Based on parts of linux/drivers/acpi/hardware/hwtimer.c, timer_pit.c,
- * timer_hpet.c, and on Arjan van de Ven's implementation for 2.4.
- *
- * This file is licensed under the GPL v2.
- *
- * Dropped all the hardware bug workarounds for now. Hopefully they
- * are not needed on 64bit chipsets.
- */
-
-#include <linux/jiffies.h>
-#include <linux/kernel.h>
-#include <linux/time.h>
-#include <linux/init.h>
-#include <linux/cpumask.h>
-#include <asm/io.h>
-#include <asm/proto.h>
-#include <asm/msr.h>
-#include <asm/vsyscall.h>
-
-#define ACPI_PM_MASK 0xFFFFFF /* limit it to 24 bits */
-
-static inline u32 cyc2us(u32 cycles)
-{
-	/* The Power Management Timer ticks at 3.579545 ticks per microsecond.
-	 * 1 / PM_TIMER_FREQUENCY == 0.27936511 =~ 286/1024 [error: 0.024%]
-	 *
-	 * Even with HZ = 100, delta is at maximum 35796 ticks, so it can
-	 * easily be multiplied with 286 (=0x11E) without having to fear
-	 * u32 overflows.
-	 */
-	cycles *= 286;
-	return (cycles >> 10);
-}
-
-static unsigned pmtimer_wait_tick(void)
-{
-	u32 a, b;
-	for (a = b = inl(pmtmr_ioport) & ACPI_PM_MASK;
-	     a == b;
-	     b = inl(pmtmr_ioport) & ACPI_PM_MASK)
-		cpu_relax();
-	return b;
-}
-
-/* note: wait time is rounded up to one tick */
-void pmtimer_wait(unsigned us)
-{
-	u32 a, b;
-	a = pmtimer_wait_tick();
-	do {
-		b = inl(pmtmr_ioport);
-		cpu_relax();
-	} while (cyc2us(b - a) < us);
-}
-
-static int __init nopmtimer_setup(char *s)
-{
-	pmtmr_ioport = 0;
-	return 1;
-}
-
-__setup("nopmtimer", nopmtimer_setup);
diff --git a/arch/x86_64/kernel/process_64.c b/arch/x86_64/kernel/process_64.c
deleted file mode 100644
index 9895655..0000000
--- a/arch/x86_64/kernel/process_64.c
+++ /dev/null
@@ -1,903 +0,0 @@
-/*
- *  linux/arch/x86-64/kernel/process.c
- *
- *  Copyright (C) 1995  Linus Torvalds
- *
- *  Pentium III FXSR, SSE support
- *	Gareth Hughes <gareth@valinux.com>, May 2000
- * 
- *  X86-64 port
- *	Andi Kleen.
- *
- *	CPU hotplug support - ashok.raj@intel.com
- */
-
-/*
- * This file handles the architecture-dependent parts of process handling..
- */
-
-#include <stdarg.h>
-
-#include <linux/cpu.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/fs.h>
-#include <linux/elfcore.h>
-#include <linux/smp.h>
-#include <linux/slab.h>
-#include <linux/user.h>
-#include <linux/module.h>
-#include <linux/a.out.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/ptrace.h>
-#include <linux/utsname.h>
-#include <linux/random.h>
-#include <linux/notifier.h>
-#include <linux/kprobes.h>
-#include <linux/kdebug.h>
-
-#include <asm/uaccess.h>
-#include <asm/pgtable.h>
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-#include <asm/i387.h>
-#include <asm/mmu_context.h>
-#include <asm/pda.h>
-#include <asm/prctl.h>
-#include <asm/desc.h>
-#include <asm/proto.h>
-#include <asm/ia32.h>
-#include <asm/idle.h>
-
-asmlinkage extern void ret_from_fork(void);
-
-unsigned long kernel_thread_flags = CLONE_VM | CLONE_UNTRACED;
-
-unsigned long boot_option_idle_override = 0;
-EXPORT_SYMBOL(boot_option_idle_override);
-
-/*
- * Powermanagement idle function, if any..
- */
-void (*pm_idle)(void);
-EXPORT_SYMBOL(pm_idle);
-static DEFINE_PER_CPU(unsigned int, cpu_idle_state);
-
-static ATOMIC_NOTIFIER_HEAD(idle_notifier);
-
-void idle_notifier_register(struct notifier_block *n)
-{
-	atomic_notifier_chain_register(&idle_notifier, n);
-}
-EXPORT_SYMBOL_GPL(idle_notifier_register);
-
-void idle_notifier_unregister(struct notifier_block *n)
-{
-	atomic_notifier_chain_unregister(&idle_notifier, n);
-}
-EXPORT_SYMBOL(idle_notifier_unregister);
-
-void enter_idle(void)
-{
-	write_pda(isidle, 1);
-	atomic_notifier_call_chain(&idle_notifier, IDLE_START, NULL);
-}
-
-static void __exit_idle(void)
-{
-	if (test_and_clear_bit_pda(0, isidle) == 0)
-		return;
-	atomic_notifier_call_chain(&idle_notifier, IDLE_END, NULL);
-}
-
-/* Called from interrupts to signify idle end */
-void exit_idle(void)
-{
-	/* idle loop has pid 0 */
-	if (current->pid)
-		return;
-	__exit_idle();
-}
-
-/*
- * We use this if we don't have any better
- * idle routine..
- */
-static void default_idle(void)
-{
-	current_thread_info()->status &= ~TS_POLLING;
-	/*
-	 * TS_POLLING-cleared state must be visible before we
-	 * test NEED_RESCHED:
-	 */
-	smp_mb();
-	local_irq_disable();
-	if (!need_resched()) {
-		/* Enables interrupts one instruction before HLT.
-		   x86 special cases this so there is no race. */
-		safe_halt();
-	} else
-		local_irq_enable();
-	current_thread_info()->status |= TS_POLLING;
-}
-
-/*
- * On SMP it's slightly faster (but much more power-consuming!)
- * to poll the ->need_resched flag instead of waiting for the
- * cross-CPU IPI to arrive. Use this option with caution.
- */
-static void poll_idle (void)
-{
-	local_irq_enable();
-	cpu_relax();
-}
-
-void cpu_idle_wait(void)
-{
-	unsigned int cpu, this_cpu = get_cpu();
-	cpumask_t map, tmp = current->cpus_allowed;
-
-	set_cpus_allowed(current, cpumask_of_cpu(this_cpu));
-	put_cpu();
-
-	cpus_clear(map);
-	for_each_online_cpu(cpu) {
-		per_cpu(cpu_idle_state, cpu) = 1;
-		cpu_set(cpu, map);
-	}
-
-	__get_cpu_var(cpu_idle_state) = 0;
-
-	wmb();
-	do {
-		ssleep(1);
-		for_each_online_cpu(cpu) {
-			if (cpu_isset(cpu, map) &&
-					!per_cpu(cpu_idle_state, cpu))
-				cpu_clear(cpu, map);
-		}
-		cpus_and(map, map, cpu_online_map);
-	} while (!cpus_empty(map));
-
-	set_cpus_allowed(current, tmp);
-}
-EXPORT_SYMBOL_GPL(cpu_idle_wait);
-
-#ifdef CONFIG_HOTPLUG_CPU
-DECLARE_PER_CPU(int, cpu_state);
-
-#include <asm/nmi.h>
-/* We halt the CPU with physical CPU hotplug */
-static inline void play_dead(void)
-{
-	idle_task_exit();
-	wbinvd();
-	mb();
-	/* Ack it */
-	__get_cpu_var(cpu_state) = CPU_DEAD;
-
-	local_irq_disable();
-	while (1)
-		halt();
-}
-#else
-static inline void play_dead(void)
-{
-	BUG();
-}
-#endif /* CONFIG_HOTPLUG_CPU */
-
-/*
- * The idle thread. There's no useful work to be
- * done, so just try to conserve power and have a
- * low exit latency (ie sit in a loop waiting for
- * somebody to say that they'd like to reschedule)
- */
-void cpu_idle (void)
-{
-	current_thread_info()->status |= TS_POLLING;
-	/* endless idle loop with no priority at all */
-	while (1) {
-		while (!need_resched()) {
-			void (*idle)(void);
-
-			if (__get_cpu_var(cpu_idle_state))
-				__get_cpu_var(cpu_idle_state) = 0;
-
-			rmb();
-			idle = pm_idle;
-			if (!idle)
-				idle = default_idle;
-			if (cpu_is_offline(smp_processor_id()))
-				play_dead();
-			/*
-			 * Idle routines should keep interrupts disabled
-			 * from here on, until they go to idle.
-			 * Otherwise, idle callbacks can misfire.
-			 */
-			local_irq_disable();
-			enter_idle();
-			idle();
-			/* In many cases the interrupt that ended idle
-			   has already called exit_idle. But some idle
-			   loops can be woken up without interrupt. */
-			__exit_idle();
-		}
-
-		preempt_enable_no_resched();
-		schedule();
-		preempt_disable();
-	}
-}
-
-/*
- * This uses new MONITOR/MWAIT instructions on P4 processors with PNI,
- * which can obviate IPI to trigger checking of need_resched.
- * We execute MONITOR against need_resched and enter optimized wait state
- * through MWAIT. Whenever someone changes need_resched, we would be woken
- * up from MWAIT (without an IPI).
- *
- * New with Core Duo processors, MWAIT can take some hints based on CPU
- * capability.
- */
-void mwait_idle_with_hints(unsigned long eax, unsigned long ecx)
-{
-	if (!need_resched()) {
-		__monitor((void *)&current_thread_info()->flags, 0, 0);
-		smp_mb();
-		if (!need_resched())
-			__mwait(eax, ecx);
-	}
-}
-
-/* Default MONITOR/MWAIT with no hints, used for default C1 state */
-static void mwait_idle(void)
-{
-	if (!need_resched()) {
-		__monitor((void *)&current_thread_info()->flags, 0, 0);
-		smp_mb();
-		if (!need_resched())
-			__sti_mwait(0, 0);
-		else
-			local_irq_enable();
-	} else {
-		local_irq_enable();
-	}
-}
-
-void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c)
-{
-	static int printed;
-	if (cpu_has(c, X86_FEATURE_MWAIT)) {
-		/*
-		 * Skip, if setup has overridden idle.
-		 * One CPU supports mwait => All CPUs supports mwait
-		 */
-		if (!pm_idle) {
-			if (!printed) {
-				printk(KERN_INFO "using mwait in idle threads.\n");
-				printed = 1;
-			}
-			pm_idle = mwait_idle;
-		}
-	}
-}
-
-static int __init idle_setup (char *str)
-{
-	if (!strcmp(str, "poll")) {
-		printk("using polling idle threads.\n");
-		pm_idle = poll_idle;
-	} else if (!strcmp(str, "mwait"))
-		force_mwait = 1;
-	else
-		return -1;
-
-	boot_option_idle_override = 1;
-	return 0;
-}
-early_param("idle", idle_setup);
-
-/* Prints also some state that isn't saved in the pt_regs */ 
-void __show_regs(struct pt_regs * regs)
-{
-	unsigned long cr0 = 0L, cr2 = 0L, cr3 = 0L, cr4 = 0L, fs, gs, shadowgs;
-	unsigned long d0, d1, d2, d3, d6, d7;
-	unsigned int fsindex,gsindex;
-	unsigned int ds,cs,es; 
-
-	printk("\n");
-	print_modules();
-	printk("Pid: %d, comm: %.20s %s %s %.*s\n",
-		current->pid, current->comm, print_tainted(),
-		init_utsname()->release,
-		(int)strcspn(init_utsname()->version, " "),
-		init_utsname()->version);
-	printk("RIP: %04lx:[<%016lx>] ", regs->cs & 0xffff, regs->rip);
-	printk_address(regs->rip); 
-	printk("RSP: %04lx:%016lx  EFLAGS: %08lx\n", regs->ss, regs->rsp,
-		regs->eflags);
-	printk("RAX: %016lx RBX: %016lx RCX: %016lx\n",
-	       regs->rax, regs->rbx, regs->rcx);
-	printk("RDX: %016lx RSI: %016lx RDI: %016lx\n",
-	       regs->rdx, regs->rsi, regs->rdi); 
-	printk("RBP: %016lx R08: %016lx R09: %016lx\n",
-	       regs->rbp, regs->r8, regs->r9); 
-	printk("R10: %016lx R11: %016lx R12: %016lx\n",
-	       regs->r10, regs->r11, regs->r12); 
-	printk("R13: %016lx R14: %016lx R15: %016lx\n",
-	       regs->r13, regs->r14, regs->r15); 
-
-	asm("movl %%ds,%0" : "=r" (ds)); 
-	asm("movl %%cs,%0" : "=r" (cs)); 
-	asm("movl %%es,%0" : "=r" (es)); 
-	asm("movl %%fs,%0" : "=r" (fsindex));
-	asm("movl %%gs,%0" : "=r" (gsindex));
-
-	rdmsrl(MSR_FS_BASE, fs);
-	rdmsrl(MSR_GS_BASE, gs); 
-	rdmsrl(MSR_KERNEL_GS_BASE, shadowgs); 
-
-	cr0 = read_cr0();
-	cr2 = read_cr2();
-	cr3 = read_cr3();
-	cr4 = read_cr4();
-
-	printk("FS:  %016lx(%04x) GS:%016lx(%04x) knlGS:%016lx\n", 
-	       fs,fsindex,gs,gsindex,shadowgs); 
-	printk("CS:  %04x DS: %04x ES: %04x CR0: %016lx\n", cs, ds, es, cr0); 
-	printk("CR2: %016lx CR3: %016lx CR4: %016lx\n", cr2, cr3, cr4);
-
-	get_debugreg(d0, 0);
-	get_debugreg(d1, 1);
-	get_debugreg(d2, 2);
-	printk("DR0: %016lx DR1: %016lx DR2: %016lx\n", d0, d1, d2);
-	get_debugreg(d3, 3);
-	get_debugreg(d6, 6);
-	get_debugreg(d7, 7);
-	printk("DR3: %016lx DR6: %016lx DR7: %016lx\n", d3, d6, d7);
-}
-
-void show_regs(struct pt_regs *regs)
-{
-	printk("CPU %d:", smp_processor_id());
-	__show_regs(regs);
-	show_trace(NULL, regs, (void *)(regs + 1));
-}
-
-/*
- * Free current thread data structures etc..
- */
-void exit_thread(void)
-{
-	struct task_struct *me = current;
-	struct thread_struct *t = &me->thread;
-
-	if (me->thread.io_bitmap_ptr) { 
-		struct tss_struct *tss = &per_cpu(init_tss, get_cpu());
-
-		kfree(t->io_bitmap_ptr);
-		t->io_bitmap_ptr = NULL;
-		clear_thread_flag(TIF_IO_BITMAP);
-		/*
-		 * Careful, clear this in the TSS too:
-		 */
-		memset(tss->io_bitmap, 0xff, t->io_bitmap_max);
-		t->io_bitmap_max = 0;
-		put_cpu();
-	}
-}
-
-void flush_thread(void)
-{
-	struct task_struct *tsk = current;
-
-	if (test_tsk_thread_flag(tsk, TIF_ABI_PENDING)) {
-		clear_tsk_thread_flag(tsk, TIF_ABI_PENDING);
-		if (test_tsk_thread_flag(tsk, TIF_IA32)) {
-			clear_tsk_thread_flag(tsk, TIF_IA32);
-		} else {
-			set_tsk_thread_flag(tsk, TIF_IA32);
-			current_thread_info()->status |= TS_COMPAT;
-		}
-	}
-	clear_tsk_thread_flag(tsk, TIF_DEBUG);
-
-	tsk->thread.debugreg0 = 0;
-	tsk->thread.debugreg1 = 0;
-	tsk->thread.debugreg2 = 0;
-	tsk->thread.debugreg3 = 0;
-	tsk->thread.debugreg6 = 0;
-	tsk->thread.debugreg7 = 0;
-	memset(tsk->thread.tls_array, 0, sizeof(tsk->thread.tls_array));	
-	/*
-	 * Forget coprocessor state..
-	 */
-	clear_fpu(tsk);
-	clear_used_math();
-}
-
-void release_thread(struct task_struct *dead_task)
-{
-	if (dead_task->mm) {
-		if (dead_task->mm->context.size) {
-			printk("WARNING: dead process %8s still has LDT? <%p/%d>\n",
-					dead_task->comm,
-					dead_task->mm->context.ldt,
-					dead_task->mm->context.size);
-			BUG();
-		}
-	}
-}
-
-static inline void set_32bit_tls(struct task_struct *t, int tls, u32 addr)
-{
-	struct user_desc ud = { 
-		.base_addr = addr,
-		.limit = 0xfffff,
-		.seg_32bit = 1,
-		.limit_in_pages = 1,
-		.useable = 1,
-	};
-	struct n_desc_struct *desc = (void *)t->thread.tls_array;
-	desc += tls;
-	desc->a = LDT_entry_a(&ud); 
-	desc->b = LDT_entry_b(&ud); 
-}
-
-static inline u32 read_32bit_tls(struct task_struct *t, int tls)
-{
-	struct desc_struct *desc = (void *)t->thread.tls_array;
-	desc += tls;
-	return desc->base0 | 
-		(((u32)desc->base1) << 16) | 
-		(((u32)desc->base2) << 24);
-}
-
-/*
- * This gets called before we allocate a new thread and copy
- * the current task into it.
- */
-void prepare_to_copy(struct task_struct *tsk)
-{
-	unlazy_fpu(tsk);
-}
-
-int copy_thread(int nr, unsigned long clone_flags, unsigned long rsp, 
-		unsigned long unused,
-	struct task_struct * p, struct pt_regs * regs)
-{
-	int err;
-	struct pt_regs * childregs;
-	struct task_struct *me = current;
-
-	childregs = ((struct pt_regs *)
-			(THREAD_SIZE + task_stack_page(p))) - 1;
-	*childregs = *regs;
-
-	childregs->rax = 0;
-	childregs->rsp = rsp;
-	if (rsp == ~0UL)
-		childregs->rsp = (unsigned long)childregs;
-
-	p->thread.rsp = (unsigned long) childregs;
-	p->thread.rsp0 = (unsigned long) (childregs+1);
-	p->thread.userrsp = me->thread.userrsp; 
-
-	set_tsk_thread_flag(p, TIF_FORK);
-
-	p->thread.fs = me->thread.fs;
-	p->thread.gs = me->thread.gs;
-
-	asm("mov %%gs,%0" : "=m" (p->thread.gsindex));
-	asm("mov %%fs,%0" : "=m" (p->thread.fsindex));
-	asm("mov %%es,%0" : "=m" (p->thread.es));
-	asm("mov %%ds,%0" : "=m" (p->thread.ds));
-
-	if (unlikely(test_tsk_thread_flag(me, TIF_IO_BITMAP))) {
-		p->thread.io_bitmap_ptr = kmalloc(IO_BITMAP_BYTES, GFP_KERNEL);
-		if (!p->thread.io_bitmap_ptr) {
-			p->thread.io_bitmap_max = 0;
-			return -ENOMEM;
-		}
-		memcpy(p->thread.io_bitmap_ptr, me->thread.io_bitmap_ptr,
-				IO_BITMAP_BYTES);
-		set_tsk_thread_flag(p, TIF_IO_BITMAP);
-	} 
-
-	/*
-	 * Set a new TLS for the child thread?
-	 */
-	if (clone_flags & CLONE_SETTLS) {
-#ifdef CONFIG_IA32_EMULATION
-		if (test_thread_flag(TIF_IA32))
-			err = ia32_child_tls(p, childregs); 
-		else 			
-#endif	 
-			err = do_arch_prctl(p, ARCH_SET_FS, childregs->r8); 
-		if (err) 
-			goto out;
-	}
-	err = 0;
-out:
-	if (err && p->thread.io_bitmap_ptr) {
-		kfree(p->thread.io_bitmap_ptr);
-		p->thread.io_bitmap_max = 0;
-	}
-	return err;
-}
-
-/*
- * This special macro can be used to load a debugging register
- */
-#define loaddebug(thread,r) set_debugreg(thread->debugreg ## r, r)
-
-static inline void __switch_to_xtra(struct task_struct *prev_p,
-			     	    struct task_struct *next_p,
-			     	    struct tss_struct *tss)
-{
-	struct thread_struct *prev, *next;
-
-	prev = &prev_p->thread,
-	next = &next_p->thread;
-
-	if (test_tsk_thread_flag(next_p, TIF_DEBUG)) {
-		loaddebug(next, 0);
-		loaddebug(next, 1);
-		loaddebug(next, 2);
-		loaddebug(next, 3);
-		/* no 4 and 5 */
-		loaddebug(next, 6);
-		loaddebug(next, 7);
-	}
-
-	if (test_tsk_thread_flag(next_p, TIF_IO_BITMAP)) {
-		/*
-		 * Copy the relevant range of the IO bitmap.
-		 * Normally this is 128 bytes or less:
-		 */
-		memcpy(tss->io_bitmap, next->io_bitmap_ptr,
-		       max(prev->io_bitmap_max, next->io_bitmap_max));
-	} else if (test_tsk_thread_flag(prev_p, TIF_IO_BITMAP)) {
-		/*
-		 * Clear any possible leftover bits:
-		 */
-		memset(tss->io_bitmap, 0xff, prev->io_bitmap_max);
-	}
-}
-
-/*
- *	switch_to(x,y) should switch tasks from x to y.
- *
- * This could still be optimized: 
- * - fold all the options into a flag word and test it with a single test.
- * - could test fs/gs bitsliced
- *
- * Kprobes not supported here. Set the probe on schedule instead.
- */
-__kprobes struct task_struct *
-__switch_to(struct task_struct *prev_p, struct task_struct *next_p)
-{
-	struct thread_struct *prev = &prev_p->thread,
-				 *next = &next_p->thread;
-	int cpu = smp_processor_id();  
-	struct tss_struct *tss = &per_cpu(init_tss, cpu);
-
-	/* we're going to use this soon, after a few expensive things */
-	if (next_p->fpu_counter>5)
-		prefetch(&next->i387.fxsave);
-
-	/*
-	 * Reload esp0, LDT and the page table pointer:
-	 */
-	tss->rsp0 = next->rsp0;
-
-	/* 
-	 * Switch DS and ES.
-	 * This won't pick up thread selector changes, but I guess that is ok.
-	 */
-	asm volatile("mov %%es,%0" : "=m" (prev->es));
-	if (unlikely(next->es | prev->es))
-		loadsegment(es, next->es); 
-	
-	asm volatile ("mov %%ds,%0" : "=m" (prev->ds));
-	if (unlikely(next->ds | prev->ds))
-		loadsegment(ds, next->ds);
-
-	load_TLS(next, cpu);
-
-	/* 
-	 * Switch FS and GS.
-	 */
-	{ 
-		unsigned fsindex;
-		asm volatile("movl %%fs,%0" : "=r" (fsindex)); 
-		/* segment register != 0 always requires a reload. 
-		   also reload when it has changed. 
-		   when prev process used 64bit base always reload
-		   to avoid an information leak. */
-		if (unlikely(fsindex | next->fsindex | prev->fs)) {
-			loadsegment(fs, next->fsindex);
-			/* check if the user used a selector != 0
-	                 * if yes clear 64bit base, since overloaded base
-                         * is always mapped to the Null selector
-                         */
-			if (fsindex)
-			prev->fs = 0;				
-		}
-		/* when next process has a 64bit base use it */
-		if (next->fs) 
-			wrmsrl(MSR_FS_BASE, next->fs); 
-		prev->fsindex = fsindex;
-	}
-	{ 
-		unsigned gsindex;
-		asm volatile("movl %%gs,%0" : "=r" (gsindex)); 
-		if (unlikely(gsindex | next->gsindex | prev->gs)) {
-			load_gs_index(next->gsindex);
-			if (gsindex)
-			prev->gs = 0;				
-		}
-		if (next->gs)
-			wrmsrl(MSR_KERNEL_GS_BASE, next->gs); 
-		prev->gsindex = gsindex;
-	}
-
-	/* Must be after DS reload */
-	unlazy_fpu(prev_p);
-
-	/* 
-	 * Switch the PDA and FPU contexts.
-	 */
-	prev->userrsp = read_pda(oldrsp); 
-	write_pda(oldrsp, next->userrsp); 
-	write_pda(pcurrent, next_p); 
-
-	write_pda(kernelstack,
-	(unsigned long)task_stack_page(next_p) + THREAD_SIZE - PDA_STACKOFFSET);
-#ifdef CONFIG_CC_STACKPROTECTOR
-	write_pda(stack_canary, next_p->stack_canary);
-	/*
-	 * Build time only check to make sure the stack_canary is at
-	 * offset 40 in the pda; this is a gcc ABI requirement
-	 */
-	BUILD_BUG_ON(offsetof(struct x8664_pda, stack_canary) != 40);
-#endif
-
-	/*
-	 * Now maybe reload the debug registers and handle I/O bitmaps
-	 */
-	if (unlikely((task_thread_info(next_p)->flags & _TIF_WORK_CTXSW))
-	    || test_tsk_thread_flag(prev_p, TIF_IO_BITMAP))
-		__switch_to_xtra(prev_p, next_p, tss);
-
-	/* If the task has used fpu the last 5 timeslices, just do a full
-	 * restore of the math state immediately to avoid the trap; the
-	 * chances of needing FPU soon are obviously high now
-	 */
-	if (next_p->fpu_counter>5)
-		math_state_restore();
-	return prev_p;
-}
-
-/*
- * sys_execve() executes a new program.
- */
-asmlinkage 
-long sys_execve(char __user *name, char __user * __user *argv,
-		char __user * __user *envp, struct pt_regs regs)
-{
-	long error;
-	char * filename;
-
-	filename = getname(name);
-	error = PTR_ERR(filename);
-	if (IS_ERR(filename)) 
-		return error;
-	error = do_execve(filename, argv, envp, &regs); 
-	if (error == 0) {
-		task_lock(current);
-		current->ptrace &= ~PT_DTRACE;
-		task_unlock(current);
-	}
-	putname(filename);
-	return error;
-}
-
-void set_personality_64bit(void)
-{
-	/* inherit personality from parent */
-
-	/* Make sure to be in 64bit mode */
-	clear_thread_flag(TIF_IA32); 
-
-	/* TBD: overwrites user setup. Should have two bits.
-	   But 64bit processes have always behaved this way,
-	   so it's not too bad. The main problem is just that
-   	   32bit childs are affected again. */
-	current->personality &= ~READ_IMPLIES_EXEC;
-}
-
-asmlinkage long sys_fork(struct pt_regs *regs)
-{
-	return do_fork(SIGCHLD, regs->rsp, regs, 0, NULL, NULL);
-}
-
-asmlinkage long
-sys_clone(unsigned long clone_flags, unsigned long newsp,
-	  void __user *parent_tid, void __user *child_tid, struct pt_regs *regs)
-{
-	if (!newsp)
-		newsp = regs->rsp;
-	return do_fork(clone_flags, newsp, regs, 0, parent_tid, child_tid);
-}
-
-/*
- * This is trivial, and on the face of it looks like it
- * could equally well be done in user mode.
- *
- * Not so, for quite unobvious reasons - register pressure.
- * In user mode vfork() cannot have a stack frame, and if
- * done by calling the "clone()" system call directly, you
- * do not have enough call-clobbered registers to hold all
- * the information you need.
- */
-asmlinkage long sys_vfork(struct pt_regs *regs)
-{
-	return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs->rsp, regs, 0,
-		    NULL, NULL);
-}
-
-unsigned long get_wchan(struct task_struct *p)
-{
-	unsigned long stack;
-	u64 fp,rip;
-	int count = 0;
-
-	if (!p || p == current || p->state==TASK_RUNNING)
-		return 0; 
-	stack = (unsigned long)task_stack_page(p);
-	if (p->thread.rsp < stack || p->thread.rsp > stack+THREAD_SIZE)
-		return 0;
-	fp = *(u64 *)(p->thread.rsp);
-	do { 
-		if (fp < (unsigned long)stack ||
-		    fp > (unsigned long)stack+THREAD_SIZE)
-			return 0; 
-		rip = *(u64 *)(fp+8); 
-		if (!in_sched_functions(rip))
-			return rip; 
-		fp = *(u64 *)fp; 
-	} while (count++ < 16); 
-	return 0;
-}
-
-long do_arch_prctl(struct task_struct *task, int code, unsigned long addr)
-{ 
-	int ret = 0; 
-	int doit = task == current;
-	int cpu;
-
-	switch (code) { 
-	case ARCH_SET_GS:
-		if (addr >= TASK_SIZE_OF(task))
-			return -EPERM; 
-		cpu = get_cpu();
-		/* handle small bases via the GDT because that's faster to 
-		   switch. */
-		if (addr <= 0xffffffff) {  
-			set_32bit_tls(task, GS_TLS, addr); 
-			if (doit) { 
-				load_TLS(&task->thread, cpu);
-				load_gs_index(GS_TLS_SEL); 
-			}
-			task->thread.gsindex = GS_TLS_SEL; 
-			task->thread.gs = 0;
-		} else { 
-			task->thread.gsindex = 0;
-			task->thread.gs = addr;
-			if (doit) {
-				load_gs_index(0);
-				ret = checking_wrmsrl(MSR_KERNEL_GS_BASE, addr);
-			} 
-		}
-		put_cpu();
-		break;
-	case ARCH_SET_FS:
-		/* Not strictly needed for fs, but do it for symmetry
-		   with gs */
-		if (addr >= TASK_SIZE_OF(task))
-			return -EPERM; 
-		cpu = get_cpu();
-		/* handle small bases via the GDT because that's faster to 
-		   switch. */
-		if (addr <= 0xffffffff) { 
-			set_32bit_tls(task, FS_TLS, addr);
-			if (doit) { 
-				load_TLS(&task->thread, cpu); 
-				asm volatile("movl %0,%%fs" :: "r"(FS_TLS_SEL));
-			}
-			task->thread.fsindex = FS_TLS_SEL;
-			task->thread.fs = 0;
-		} else { 
-			task->thread.fsindex = 0;
-			task->thread.fs = addr;
-			if (doit) {
-				/* set the selector to 0 to not confuse
-				   __switch_to */
-				asm volatile("movl %0,%%fs" :: "r" (0));
-				ret = checking_wrmsrl(MSR_FS_BASE, addr);
-			}
-		}
-		put_cpu();
-		break;
-	case ARCH_GET_FS: { 
-		unsigned long base; 
-		if (task->thread.fsindex == FS_TLS_SEL)
-			base = read_32bit_tls(task, FS_TLS);
-		else if (doit)
-			rdmsrl(MSR_FS_BASE, base);
-		else
-			base = task->thread.fs;
-		ret = put_user(base, (unsigned long __user *)addr); 
-		break; 
-	}
-	case ARCH_GET_GS: { 
-		unsigned long base;
-		unsigned gsindex;
-		if (task->thread.gsindex == GS_TLS_SEL)
-			base = read_32bit_tls(task, GS_TLS);
-		else if (doit) {
- 			asm("movl %%gs,%0" : "=r" (gsindex));
-			if (gsindex)
-				rdmsrl(MSR_KERNEL_GS_BASE, base);
-			else
-				base = task->thread.gs;
-		}
-		else
-			base = task->thread.gs;
-		ret = put_user(base, (unsigned long __user *)addr); 
-		break;
-	}
-
-	default:
-		ret = -EINVAL;
-		break;
-	} 
-
-	return ret;	
-} 
-
-long sys_arch_prctl(int code, unsigned long addr)
-{
-	return do_arch_prctl(current, code, addr);
-} 
-
-/* 
- * Capture the user space registers if the task is not running (in user space)
- */
-int dump_task_regs(struct task_struct *tsk, elf_gregset_t *regs)
-{
-	struct pt_regs *pp, ptregs;
-
-	pp = task_pt_regs(tsk);
-
-	ptregs = *pp; 
-	ptregs.cs &= 0xffff;
-	ptregs.ss &= 0xffff;
-
-	elf_core_copy_regs(regs, &ptregs);
- 
-	return 1;
-}
-
-unsigned long arch_align_stack(unsigned long sp)
-{
-	if (!(current->personality & ADDR_NO_RANDOMIZE) && randomize_va_space)
-		sp -= get_random_int() % 8192;
-	return sp & ~0xf;
-}
diff --git a/arch/x86_64/kernel/ptrace_64.c b/arch/x86_64/kernel/ptrace_64.c
deleted file mode 100644
index eea3702..0000000
--- a/arch/x86_64/kernel/ptrace_64.c
+++ /dev/null
@@ -1,627 +0,0 @@
-/* ptrace.c */
-/* By Ross Biro 1/23/92 */
-/*
- * Pentium III FXSR, SSE support
- *	Gareth Hughes <gareth@valinux.com>, May 2000
- * 
- * x86-64 port 2000-2002 Andi Kleen
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/errno.h>
-#include <linux/ptrace.h>
-#include <linux/user.h>
-#include <linux/security.h>
-#include <linux/audit.h>
-#include <linux/seccomp.h>
-#include <linux/signal.h>
-
-#include <asm/uaccess.h>
-#include <asm/pgtable.h>
-#include <asm/system.h>
-#include <asm/processor.h>
-#include <asm/i387.h>
-#include <asm/debugreg.h>
-#include <asm/ldt.h>
-#include <asm/desc.h>
-#include <asm/proto.h>
-#include <asm/ia32.h>
-
-/*
- * does not yet catch signals sent when the child dies.
- * in exit.c or in signal.c.
- */
-
-/*
- * Determines which flags the user has access to [1 = access, 0 = no access].
- * Prohibits changing ID(21), VIP(20), VIF(19), VM(17), IOPL(12-13), IF(9).
- * Also masks reserved bits (63-22, 15, 5, 3, 1).
- */
-#define FLAG_MASK 0x54dd5UL
-
-/* set's the trap flag. */
-#define TRAP_FLAG 0x100UL
-
-/*
- * eflags and offset of eflags on child stack..
- */
-#define EFLAGS offsetof(struct pt_regs, eflags)
-#define EFL_OFFSET ((int)(EFLAGS-sizeof(struct pt_regs)))
-
-/*
- * this routine will get a word off of the processes privileged stack. 
- * the offset is how far from the base addr as stored in the TSS.  
- * this routine assumes that all the privileged stacks are in our
- * data space.
- */   
-static inline unsigned long get_stack_long(struct task_struct *task, int offset)
-{
-	unsigned char *stack;
-
-	stack = (unsigned char *)task->thread.rsp0;
-	stack += offset;
-	return (*((unsigned long *)stack));
-}
-
-/*
- * this routine will put a word on the processes privileged stack. 
- * the offset is how far from the base addr as stored in the TSS.  
- * this routine assumes that all the privileged stacks are in our
- * data space.
- */
-static inline long put_stack_long(struct task_struct *task, int offset,
-	unsigned long data)
-{
-	unsigned char * stack;
-
-	stack = (unsigned char *) task->thread.rsp0;
-	stack += offset;
-	*(unsigned long *) stack = data;
-	return 0;
-}
-
-#define LDT_SEGMENT 4
-
-unsigned long convert_rip_to_linear(struct task_struct *child, struct pt_regs *regs)
-{
-	unsigned long addr, seg;
-
-	addr = regs->rip;
-	seg = regs->cs & 0xffff;
-
-	/*
-	 * We'll assume that the code segments in the GDT
-	 * are all zero-based. That is largely true: the
-	 * TLS segments are used for data, and the PNPBIOS
-	 * and APM bios ones we just ignore here.
-	 */
-	if (seg & LDT_SEGMENT) {
-		u32 *desc;
-		unsigned long base;
-
-		seg &= ~7UL;
-
-		down(&child->mm->context.sem);
-		if (unlikely((seg >> 3) >= child->mm->context.size))
-			addr = -1L; /* bogus selector, access would fault */
-		else {
-			desc = child->mm->context.ldt + seg;
-			base = ((desc[0] >> 16) |
-				((desc[1] & 0xff) << 16) |
-				(desc[1] & 0xff000000));
-
-			/* 16-bit code segment? */
-			if (!((desc[1] >> 22) & 1))
-				addr &= 0xffff;
-			addr += base;
-		}
-		up(&child->mm->context.sem);
-	}
-
-	return addr;
-}
-
-static int is_setting_trap_flag(struct task_struct *child, struct pt_regs *regs)
-{
-	int i, copied;
-	unsigned char opcode[15];
-	unsigned long addr = convert_rip_to_linear(child, regs);
-
-	copied = access_process_vm(child, addr, opcode, sizeof(opcode), 0);
-	for (i = 0; i < copied; i++) {
-		switch (opcode[i]) {
-		/* popf and iret */
-		case 0x9d: case 0xcf:
-			return 1;
-
-			/* CHECKME: 64 65 */
-
-		/* opcode and address size prefixes */
-		case 0x66: case 0x67:
-			continue;
-		/* irrelevant prefixes (segment overrides and repeats) */
-		case 0x26: case 0x2e:
-		case 0x36: case 0x3e:
-		case 0x64: case 0x65:
-		case 0xf2: case 0xf3:
-			continue;
-
-		case 0x40 ... 0x4f:
-			if (regs->cs != __USER_CS)
-				/* 32-bit mode: register increment */
-				return 0;
-			/* 64-bit mode: REX prefix */
-			continue;
-
-			/* CHECKME: f2, f3 */
-
-		/*
-		 * pushf: NOTE! We should probably not let
-		 * the user see the TF bit being set. But
-		 * it's more pain than it's worth to avoid
-		 * it, and a debugger could emulate this
-		 * all in user space if it _really_ cares.
-		 */
-		case 0x9c:
-		default:
-			return 0;
-		}
-	}
-	return 0;
-}
-
-static void set_singlestep(struct task_struct *child)
-{
-	struct pt_regs *regs = task_pt_regs(child);
-
-	/*
-	 * Always set TIF_SINGLESTEP - this guarantees that
-	 * we single-step system calls etc..  This will also
-	 * cause us to set TF when returning to user mode.
-	 */
-	set_tsk_thread_flag(child, TIF_SINGLESTEP);
-
-	/*
-	 * If TF was already set, don't do anything else
-	 */
-	if (regs->eflags & TRAP_FLAG)
-		return;
-
-	/* Set TF on the kernel stack.. */
-	regs->eflags |= TRAP_FLAG;
-
-	/*
-	 * ..but if TF is changed by the instruction we will trace,
-	 * don't mark it as being "us" that set it, so that we
-	 * won't clear it by hand later.
-	 */
-	if (is_setting_trap_flag(child, regs))
-		return;
-
-	child->ptrace |= PT_DTRACE;
-}
-
-static void clear_singlestep(struct task_struct *child)
-{
-	/* Always clear TIF_SINGLESTEP... */
-	clear_tsk_thread_flag(child, TIF_SINGLESTEP);
-
-	/* But touch TF only if it was set by us.. */
-	if (child->ptrace & PT_DTRACE) {
-		struct pt_regs *regs = task_pt_regs(child);
-		regs->eflags &= ~TRAP_FLAG;
-		child->ptrace &= ~PT_DTRACE;
-	}
-}
-
-/*
- * Called by kernel/ptrace.c when detaching..
- *
- * Make sure the single step bit is not set.
- */
-void ptrace_disable(struct task_struct *child)
-{ 
-	clear_singlestep(child);
-}
-
-static int putreg(struct task_struct *child,
-	unsigned long regno, unsigned long value)
-{
-	unsigned long tmp; 
-	
-	switch (regno) {
-		case offsetof(struct user_regs_struct,fs):
-			if (value && (value & 3) != 3)
-				return -EIO;
-			child->thread.fsindex = value & 0xffff; 
-			return 0;
-		case offsetof(struct user_regs_struct,gs):
-			if (value && (value & 3) != 3)
-				return -EIO;
-			child->thread.gsindex = value & 0xffff;
-			return 0;
-		case offsetof(struct user_regs_struct,ds):
-			if (value && (value & 3) != 3)
-				return -EIO;
-			child->thread.ds = value & 0xffff;
-			return 0;
-		case offsetof(struct user_regs_struct,es): 
-			if (value && (value & 3) != 3)
-				return -EIO;
-			child->thread.es = value & 0xffff;
-			return 0;
-		case offsetof(struct user_regs_struct,ss):
-			if ((value & 3) != 3)
-				return -EIO;
-			value &= 0xffff;
-			return 0;
-		case offsetof(struct user_regs_struct,fs_base):
-			if (value >= TASK_SIZE_OF(child))
-				return -EIO;
-			child->thread.fs = value;
-			return 0;
-		case offsetof(struct user_regs_struct,gs_base):
-			if (value >= TASK_SIZE_OF(child))
-				return -EIO;
-			child->thread.gs = value;
-			return 0;
-		case offsetof(struct user_regs_struct, eflags):
-			value &= FLAG_MASK;
-			tmp = get_stack_long(child, EFL_OFFSET); 
-			tmp &= ~FLAG_MASK; 
-			value |= tmp;
-			break;
-		case offsetof(struct user_regs_struct,cs): 
-			if ((value & 3) != 3)
-				return -EIO;
-			value &= 0xffff;
-			break;
-	}
-	put_stack_long(child, regno - sizeof(struct pt_regs), value);
-	return 0;
-}
-
-static unsigned long getreg(struct task_struct *child, unsigned long regno)
-{
-	unsigned long val;
-	switch (regno) {
-		case offsetof(struct user_regs_struct, fs):
-			return child->thread.fsindex;
-		case offsetof(struct user_regs_struct, gs):
-			return child->thread.gsindex;
-		case offsetof(struct user_regs_struct, ds):
-			return child->thread.ds;
-		case offsetof(struct user_regs_struct, es):
-			return child->thread.es; 
-		case offsetof(struct user_regs_struct, fs_base):
-			return child->thread.fs;
-		case offsetof(struct user_regs_struct, gs_base):
-			return child->thread.gs;
-		default:
-			regno = regno - sizeof(struct pt_regs);
-			val = get_stack_long(child, regno);
-			if (test_tsk_thread_flag(child, TIF_IA32))
-				val &= 0xffffffff;
-			return val;
-	}
-
-}
-
-long arch_ptrace(struct task_struct *child, long request, long addr, long data)
-{
-	long i, ret;
-	unsigned ui;
-
-	switch (request) {
-	/* when I and D space are separate, these will need to be fixed. */
-	case PTRACE_PEEKTEXT: /* read word at location addr. */ 
-	case PTRACE_PEEKDATA:
-		ret = generic_ptrace_peekdata(child, addr, data);
-		break;
-
-	/* read the word at location addr in the USER area. */
-	case PTRACE_PEEKUSR: {
-		unsigned long tmp;
-
-		ret = -EIO;
-		if ((addr & 7) ||
-		    addr > sizeof(struct user) - 7)
-			break;
-
-		switch (addr) { 
-		case 0 ... sizeof(struct user_regs_struct) - sizeof(long):
-			tmp = getreg(child, addr);
-			break;
-		case offsetof(struct user, u_debugreg[0]):
-			tmp = child->thread.debugreg0;
-			break;
-		case offsetof(struct user, u_debugreg[1]):
-			tmp = child->thread.debugreg1;
-			break;
-		case offsetof(struct user, u_debugreg[2]):
-			tmp = child->thread.debugreg2;
-			break;
-		case offsetof(struct user, u_debugreg[3]):
-			tmp = child->thread.debugreg3;
-			break;
-		case offsetof(struct user, u_debugreg[6]):
-			tmp = child->thread.debugreg6;
-			break;
-		case offsetof(struct user, u_debugreg[7]):
-			tmp = child->thread.debugreg7;
-			break;
-		default:
-			tmp = 0;
-			break;
-		}
-		ret = put_user(tmp,(unsigned long __user *) data);
-		break;
-	}
-
-	/* when I and D space are separate, this will have to be fixed. */
-	case PTRACE_POKETEXT: /* write the word at location addr. */
-	case PTRACE_POKEDATA:
-		ret = generic_ptrace_pokedata(child, addr, data);
-		break;
-
-	case PTRACE_POKEUSR: /* write the word at location addr in the USER area */
-	{
-		int dsize = test_tsk_thread_flag(child, TIF_IA32) ? 3 : 7;
-		ret = -EIO;
-		if ((addr & 7) ||
-		    addr > sizeof(struct user) - 7)
-			break;
-
-		switch (addr) { 
-		case 0 ... sizeof(struct user_regs_struct) - sizeof(long):
-			ret = putreg(child, addr, data);
-			break;
-		/* Disallows to set a breakpoint into the vsyscall */
-		case offsetof(struct user, u_debugreg[0]):
-			if (data >= TASK_SIZE_OF(child) - dsize) break;
-			child->thread.debugreg0 = data;
-			ret = 0;
-			break;
-		case offsetof(struct user, u_debugreg[1]):
-			if (data >= TASK_SIZE_OF(child) - dsize) break;
-			child->thread.debugreg1 = data;
-			ret = 0;
-			break;
-		case offsetof(struct user, u_debugreg[2]):
-			if (data >= TASK_SIZE_OF(child) - dsize) break;
-			child->thread.debugreg2 = data;
-			ret = 0;
-			break;
-		case offsetof(struct user, u_debugreg[3]):
-			if (data >= TASK_SIZE_OF(child) - dsize) break;
-			child->thread.debugreg3 = data;
-			ret = 0;
-			break;
-		case offsetof(struct user, u_debugreg[6]):
-				  if (data >> 32)
-				break; 
-			child->thread.debugreg6 = data;
-			ret = 0;
-			break;
-		case offsetof(struct user, u_debugreg[7]):
-			/* See arch/i386/kernel/ptrace.c for an explanation of
-			 * this awkward check.*/
-			data &= ~DR_CONTROL_RESERVED;
-			for(i=0; i<4; i++)
-				if ((0x5554 >> ((data >> (16 + 4*i)) & 0xf)) & 1)
-					break;
-			if (i == 4) {
-			  child->thread.debugreg7 = data;
-			  if (data)
-			  	set_tsk_thread_flag(child, TIF_DEBUG);
-			  else
-			  	clear_tsk_thread_flag(child, TIF_DEBUG);
-			  ret = 0;
-		  	}
-		  break;
-		}
-		break;
-	}
-	case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */
-	case PTRACE_CONT:    /* restart after signal. */
-
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		if (request == PTRACE_SYSCALL)
-			set_tsk_thread_flag(child,TIF_SYSCALL_TRACE);
-		else
-			clear_tsk_thread_flag(child,TIF_SYSCALL_TRACE);
-		clear_tsk_thread_flag(child, TIF_SINGLESTEP);
-		child->exit_code = data;
-		/* make sure the single step bit is not set. */
-		clear_singlestep(child);
-		wake_up_process(child);
-		ret = 0;
-		break;
-
-#ifdef CONFIG_IA32_EMULATION
-		/* This makes only sense with 32bit programs. Allow a
-		   64bit debugger to fully examine them too. Better
-		   don't use it against 64bit processes, use
-		   PTRACE_ARCH_PRCTL instead. */
-	case PTRACE_SET_THREAD_AREA: {
-		struct user_desc __user *p;
-		int old; 
-		p = (struct user_desc __user *)data;
-		get_user(old,  &p->entry_number); 
-		put_user(addr, &p->entry_number);
-		ret = do_set_thread_area(&child->thread, p);
-		put_user(old,  &p->entry_number); 
-		break;
-	case PTRACE_GET_THREAD_AREA:
-		p = (struct user_desc __user *)data;
-		get_user(old,  &p->entry_number); 
-		put_user(addr, &p->entry_number);
-		ret = do_get_thread_area(&child->thread, p);
-		put_user(old,  &p->entry_number); 
-		break;
-	} 
-#endif
-		/* normal 64bit interface to access TLS data. 
-		   Works just like arch_prctl, except that the arguments
-		   are reversed. */
-	case PTRACE_ARCH_PRCTL: 
-		ret = do_arch_prctl(child, data, addr);
-		break;
-
-/*
- * make the child exit.  Best I can do is send it a sigkill. 
- * perhaps it should be put in the status that it wants to 
- * exit.
- */
-	case PTRACE_KILL:
-		ret = 0;
-		if (child->exit_state == EXIT_ZOMBIE)	/* already dead */
-			break;
-		clear_tsk_thread_flag(child, TIF_SINGLESTEP);
-		child->exit_code = SIGKILL;
-		/* make sure the single step bit is not set. */
-		clear_singlestep(child);
-		wake_up_process(child);
-		break;
-
-	case PTRACE_SINGLESTEP:    /* set the trap flag. */
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		clear_tsk_thread_flag(child,TIF_SYSCALL_TRACE);
-		set_singlestep(child);
-		child->exit_code = data;
-		/* give it a chance to run. */
-		wake_up_process(child);
-		ret = 0;
-		break;
-
-	case PTRACE_DETACH:
-		/* detach a process that was attached. */
-		ret = ptrace_detach(child, data);
-		break;
-
-	case PTRACE_GETREGS: { /* Get all gp regs from the child. */
-	  	if (!access_ok(VERIFY_WRITE, (unsigned __user *)data,
-			       sizeof(struct user_regs_struct))) {
-			ret = -EIO;
-			break;
-		}
-		ret = 0;
-		for (ui = 0; ui < sizeof(struct user_regs_struct); ui += sizeof(long)) {
-			ret |= __put_user(getreg(child, ui),(unsigned long __user *) data);
-			data += sizeof(long);
-		}
-		break;
-	}
-
-	case PTRACE_SETREGS: { /* Set all gp regs in the child. */
-		unsigned long tmp;
-	  	if (!access_ok(VERIFY_READ, (unsigned __user *)data,
-			       sizeof(struct user_regs_struct))) {
-			ret = -EIO;
-			break;
-		}
-		ret = 0;
-		for (ui = 0; ui < sizeof(struct user_regs_struct); ui += sizeof(long)) {
-			ret = __get_user(tmp, (unsigned long __user *) data);
-			if (ret)
-				break;
-			ret = putreg(child, ui, tmp);
-			if (ret)
-				break;
-			data += sizeof(long);
-		}
-		break;
-	}
-
-	case PTRACE_GETFPREGS: { /* Get the child extended FPU state. */
-		if (!access_ok(VERIFY_WRITE, (unsigned __user *)data,
-			       sizeof(struct user_i387_struct))) {
-			ret = -EIO;
-			break;
-		}
-		ret = get_fpregs((struct user_i387_struct __user *)data, child);
-		break;
-	}
-
-	case PTRACE_SETFPREGS: { /* Set the child extended FPU state. */
-		if (!access_ok(VERIFY_READ, (unsigned __user *)data,
-			       sizeof(struct user_i387_struct))) {
-			ret = -EIO;
-			break;
-		}
-		set_stopped_child_used_math(child);
-		ret = set_fpregs(child, (struct user_i387_struct __user *)data);
-		break;
-	}
-
-	default:
-		ret = ptrace_request(child, request, addr, data);
-		break;
-	}
-	return ret;
-}
-
-static void syscall_trace(struct pt_regs *regs)
-{
-
-#if 0
-	printk("trace %s rip %lx rsp %lx rax %d origrax %d caller %lx tiflags %x ptrace %x\n",
-	       current->comm,
-	       regs->rip, regs->rsp, regs->rax, regs->orig_rax, __builtin_return_address(0),
-	       current_thread_info()->flags, current->ptrace); 
-#endif
-
-	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
-				? 0x80 : 0));
-	/*
-	 * this isn't the same as continuing with a signal, but it will do
-	 * for normal use.  strace only continues with a signal if the
-	 * stopping signal is not SIGTRAP.  -brl
-	 */
-	if (current->exit_code) {
-		send_sig(current->exit_code, current, 1);
-		current->exit_code = 0;
-	}
-}
-
-asmlinkage void syscall_trace_enter(struct pt_regs *regs)
-{
-	/* do the secure computing check first */
-	secure_computing(regs->orig_rax);
-
-	if (test_thread_flag(TIF_SYSCALL_TRACE)
-	    && (current->ptrace & PT_PTRACED))
-		syscall_trace(regs);
-
-	if (unlikely(current->audit_context)) {
-		if (test_thread_flag(TIF_IA32)) {
-			audit_syscall_entry(AUDIT_ARCH_I386,
-					    regs->orig_rax,
-					    regs->rbx, regs->rcx,
-					    regs->rdx, regs->rsi);
-		} else {
-			audit_syscall_entry(AUDIT_ARCH_X86_64,
-					    regs->orig_rax,
-					    regs->rdi, regs->rsi,
-					    regs->rdx, regs->r10);
-		}
-	}
-}
-
-asmlinkage void syscall_trace_leave(struct pt_regs *regs)
-{
-	if (unlikely(current->audit_context))
-		audit_syscall_exit(AUDITSC_RESULT(regs->rax), regs->rax);
-
-	if ((test_thread_flag(TIF_SYSCALL_TRACE)
-	     || test_thread_flag(TIF_SINGLESTEP))
-	    && (current->ptrace & PT_PTRACED))
-		syscall_trace(regs);
-}
diff --git a/arch/x86_64/kernel/reboot_64.c b/arch/x86_64/kernel/reboot_64.c
deleted file mode 100644
index 368db2b..0000000
--- a/arch/x86_64/kernel/reboot_64.c
+++ /dev/null
@@ -1,171 +0,0 @@
-/* Various gunk just to reboot the machine. */ 
-#include <linux/module.h>
-#include <linux/reboot.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/kernel.h>
-#include <linux/ctype.h>
-#include <linux/string.h>
-#include <linux/pm.h>
-#include <linux/kdebug.h>
-#include <linux/sched.h>
-#include <asm/io.h>
-#include <asm/delay.h>
-#include <asm/hw_irq.h>
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/tlbflush.h>
-#include <asm/apic.h>
-#include <asm/iommu.h>
-
-/*
- * Power off function, if any
- */
-void (*pm_power_off)(void);
-EXPORT_SYMBOL(pm_power_off);
-
-static long no_idt[3];
-static enum { 
-	BOOT_TRIPLE = 't',
-	BOOT_KBD = 'k'
-} reboot_type = BOOT_KBD;
-static int reboot_mode = 0;
-int reboot_force;
-
-/* reboot=t[riple] | k[bd] [, [w]arm | [c]old]
-   warm   Don't set the cold reboot flag
-   cold   Set the cold reboot flag
-   triple Force a triple fault (init)
-   kbd    Use the keyboard controller. cold reset (default)
-   force  Avoid anything that could hang.
- */ 
-static int __init reboot_setup(char *str)
-{
-	for (;;) {
-		switch (*str) {
-		case 'w': 
-			reboot_mode = 0x1234;
-			break;
-
-		case 'c':
-			reboot_mode = 0;
-			break;
-
-		case 't':
-		case 'b':
-		case 'k':
-			reboot_type = *str;
-			break;
-		case 'f':
-			reboot_force = 1;
-			break;
-		}
-		if((str = strchr(str,',')) != NULL)
-			str++;
-		else
-			break;
-	}
-	return 1;
-}
-
-__setup("reboot=", reboot_setup);
-
-static inline void kb_wait(void)
-{
-	int i;
-
-	for (i=0; i<0x10000; i++)
-		if ((inb_p(0x64) & 0x02) == 0)
-			break;
-}
-
-void machine_shutdown(void)
-{
-	unsigned long flags;
-
-	/* Stop the cpus and apics */
-#ifdef CONFIG_SMP
-	int reboot_cpu_id;
-
-	/* The boot cpu is always logical cpu 0 */
-	reboot_cpu_id = 0;
-
-	/* Make certain the cpu I'm about to reboot on is online */
-	if (!cpu_isset(reboot_cpu_id, cpu_online_map)) {
-		reboot_cpu_id = smp_processor_id();
-	}
-
-	/* Make certain I only run on the appropriate processor */
-	set_cpus_allowed(current, cpumask_of_cpu(reboot_cpu_id));
-
-	/* O.K Now that I'm on the appropriate processor,
-	 * stop all of the others.
-	 */
-	smp_send_stop();
-#endif
-
-	local_irq_save(flags);
-
-#ifndef CONFIG_SMP
-	disable_local_APIC();
-#endif
-
-	disable_IO_APIC();
-
-	local_irq_restore(flags);
-
-	pci_iommu_shutdown();
-}
-
-void machine_emergency_restart(void)
-{
-	int i;
-
-	/* Tell the BIOS if we want cold or warm reboot */
-	*((unsigned short *)__va(0x472)) = reboot_mode;
-       
-	for (;;) {
-		/* Could also try the reset bit in the Hammer NB */
-		switch (reboot_type) { 
-		case BOOT_KBD:
-		for (i=0; i<10; i++) {
-			kb_wait();
-			udelay(50);
-			outb(0xfe,0x64);         /* pulse reset low */
-			udelay(50);
-		}
-
-		case BOOT_TRIPLE: 
-			__asm__ __volatile__("lidt (%0)": :"r" (&no_idt));
-			__asm__ __volatile__("int3");
-
-			reboot_type = BOOT_KBD;
-			break;
-		}      
-	}      
-}
-
-void machine_restart(char * __unused)
-{
-	printk("machine restart\n");
-
-	if (!reboot_force) {
-		machine_shutdown();
-	}
-	machine_emergency_restart();
-}
-
-void machine_halt(void)
-{
-}
-
-void machine_power_off(void)
-{
-	if (pm_power_off) {
-		if (!reboot_force) {
-			machine_shutdown();
-		}
-		pm_power_off();
-	}
-}
-
diff --git a/arch/x86_64/kernel/relocate_kernel_64.S b/arch/x86_64/kernel/relocate_kernel_64.S
deleted file mode 100644
index 14e9587..0000000
--- a/arch/x86_64/kernel/relocate_kernel_64.S
+++ /dev/null
@@ -1,276 +0,0 @@
-/*
- * relocate_kernel.S - put the kernel image in place to boot
- * Copyright (C) 2002-2005 Eric Biederman  <ebiederm@xmission.com>
- *
- * This source code is licensed under the GNU General Public License,
- * Version 2.  See the file COPYING for more details.
- */
-
-#include <linux/linkage.h>
-#include <asm/page.h>
-#include <asm/kexec.h>
-
-/*
- * Must be relocatable PIC code callable as a C function
- */
-
-#define PTR(x) (x << 3)
-#define PAGE_ALIGNED (1 << PAGE_SHIFT)
-#define PAGE_ATTR 0x63 /* _PAGE_PRESENT|_PAGE_RW|_PAGE_ACCESSED|_PAGE_DIRTY */
-
-	.text
-	.align PAGE_ALIGNED
-	.code64
-	.globl relocate_kernel
-relocate_kernel:
-	/* %rdi indirection_page
-	 * %rsi page_list
-	 * %rdx start address
-	 */
-
-	/* map the control page at its virtual address */
-
-	movq	$0x0000ff8000000000, %r10        /* mask */
-	mov	$(39 - 3), %cl                   /* bits to shift */
-	movq	PTR(VA_CONTROL_PAGE)(%rsi), %r11 /* address to map */
-
-	movq	%r11, %r9
-	andq	%r10, %r9
-	shrq	%cl, %r9
-
-	movq	PTR(VA_PGD)(%rsi), %r8
-	addq	%r8, %r9
-	movq	PTR(PA_PUD_0)(%rsi), %r8
-	orq	$PAGE_ATTR, %r8
-	movq	%r8, (%r9)
-
-	shrq	$9, %r10
-	sub	$9, %cl
-
-	movq	%r11, %r9
-	andq	%r10, %r9
-	shrq	%cl, %r9
-
-	movq	PTR(VA_PUD_0)(%rsi), %r8
-	addq	%r8, %r9
-	movq	PTR(PA_PMD_0)(%rsi), %r8
-	orq	$PAGE_ATTR, %r8
-	movq	%r8, (%r9)
-
-	shrq	$9, %r10
-	sub	$9, %cl
-
-	movq	%r11, %r9
-	andq	%r10, %r9
-	shrq	%cl, %r9
-
-	movq	PTR(VA_PMD_0)(%rsi), %r8
-	addq	%r8, %r9
-	movq	PTR(PA_PTE_0)(%rsi), %r8
-	orq	$PAGE_ATTR, %r8
-	movq	%r8, (%r9)
-
-	shrq	$9, %r10
-	sub	$9, %cl
-
-	movq	%r11, %r9
-	andq	%r10, %r9
-	shrq	%cl, %r9
-
-	movq	PTR(VA_PTE_0)(%rsi), %r8
-	addq	%r8, %r9
-	movq	PTR(PA_CONTROL_PAGE)(%rsi), %r8
-	orq	$PAGE_ATTR, %r8
-	movq	%r8, (%r9)
-
-	/* identity map the control page at its physical address */
-
-	movq	$0x0000ff8000000000, %r10        /* mask */
-	mov	$(39 - 3), %cl                   /* bits to shift */
-	movq	PTR(PA_CONTROL_PAGE)(%rsi), %r11 /* address to map */
-
-	movq	%r11, %r9
-	andq	%r10, %r9
-	shrq	%cl, %r9
-
-	movq	PTR(VA_PGD)(%rsi), %r8
-	addq	%r8, %r9
-	movq	PTR(PA_PUD_1)(%rsi), %r8
-	orq	$PAGE_ATTR, %r8
-	movq	%r8, (%r9)
-
-	shrq	$9, %r10
-	sub	$9, %cl
-
-	movq	%r11, %r9
-	andq	%r10, %r9
-	shrq	%cl, %r9
-
-	movq	PTR(VA_PUD_1)(%rsi), %r8
-	addq	%r8, %r9
-	movq	PTR(PA_PMD_1)(%rsi), %r8
-	orq	$PAGE_ATTR, %r8
-	movq	%r8, (%r9)
-
-	shrq	$9, %r10
-	sub	$9, %cl
-
-	movq	%r11, %r9
-	andq	%r10, %r9
-	shrq	%cl, %r9
-
-	movq	PTR(VA_PMD_1)(%rsi), %r8
-	addq	%r8, %r9
-	movq	PTR(PA_PTE_1)(%rsi), %r8
-	orq	$PAGE_ATTR, %r8
-	movq	%r8, (%r9)
-
-	shrq	$9, %r10
-	sub	$9, %cl
-
-	movq	%r11, %r9
-	andq	%r10, %r9
-	shrq	%cl, %r9
-
-	movq	PTR(VA_PTE_1)(%rsi), %r8
-	addq	%r8, %r9
-	movq	PTR(PA_CONTROL_PAGE)(%rsi), %r8
-	orq	$PAGE_ATTR, %r8
-	movq	%r8, (%r9)
-
-relocate_new_kernel:
-	/* %rdi indirection_page
-	 * %rsi page_list
-	 * %rdx start address
-	 */
-
-	/* zero out flags, and disable interrupts */
-	pushq $0
-	popfq
-
-	/* get physical address of control page now */
-	/* this is impossible after page table switch */
-	movq	PTR(PA_CONTROL_PAGE)(%rsi), %r8
-
-	/* get physical address of page table now too */
-	movq	PTR(PA_TABLE_PAGE)(%rsi), %rcx
-
-	/* switch to new set of page tables */
-	movq	PTR(PA_PGD)(%rsi), %r9
-	movq	%r9, %cr3
-
-	/* setup a new stack at the end of the physical control page */
-	lea	4096(%r8), %rsp
-
-	/* jump to identity mapped page */
-	addq	$(identity_mapped - relocate_kernel), %r8
-	pushq	%r8
-	ret
-
-identity_mapped:
-	/* store the start address on the stack */
-	pushq   %rdx
-
-	/* Set cr0 to a known state:
-	 * 31 1 == Paging enabled
-	 * 18 0 == Alignment check disabled
-	 * 16 0 == Write protect disabled
-	 * 3  0 == No task switch
-	 * 2  0 == Don't do FP software emulation.
-	 * 0  1 == Proctected mode enabled
-	 */
-	movq	%cr0, %rax
-	andq	$~((1<<18)|(1<<16)|(1<<3)|(1<<2)), %rax
-	orl	$((1<<31)|(1<<0)), %eax
-	movq	%rax, %cr0
-
-	/* Set cr4 to a known state:
-	 * 10 0 == xmm exceptions disabled
-	 * 9  0 == xmm registers instructions disabled
-	 * 8  0 == performance monitoring counter disabled
-	 * 7  0 == page global disabled
-	 * 6  0 == machine check exceptions disabled
-	 * 5  1 == physical address extension enabled
-	 * 4  0 == page size extensions	disabled
-	 * 3  0 == Debug extensions disabled
-	 * 2  0 == Time stamp disable (disabled)
-	 * 1  0 == Protected mode virtual interrupts disabled
-	 * 0  0 == VME disabled
-	 */
-
-	movq	$((1<<5)), %rax
-	movq	%rax, %cr4
-
-	jmp 1f
-1:
-
-	/* Switch to the identity mapped page tables,
-	 * and flush the TLB.
-	*/
-	movq	%rcx, %cr3
-
-	/* Do the copies */
-	movq	%rdi, %rcx 	/* Put the page_list in %rcx */
-	xorq	%rdi, %rdi
-	xorq	%rsi, %rsi
-	jmp	1f
-
-0:	/* top, read another word for the indirection page */
-
-	movq	(%rbx), %rcx
-	addq	$8,	%rbx
-1:
-	testq	$0x1,	%rcx  /* is it a destination page? */
-	jz	2f
-	movq	%rcx,	%rdi
-	andq	$0xfffffffffffff000, %rdi
-	jmp	0b
-2:
-	testq	$0x2,	%rcx  /* is it an indirection page? */
-	jz	2f
-	movq	%rcx,   %rbx
-	andq	$0xfffffffffffff000, %rbx
-	jmp	0b
-2:
-	testq	$0x4,	%rcx  /* is it the done indicator? */
-	jz	2f
-	jmp	3f
-2:
-	testq	$0x8,	%rcx  /* is it the source indicator? */
-	jz	0b	      /* Ignore it otherwise */
-	movq	%rcx,   %rsi  /* For ever source page do a copy */
-	andq	$0xfffffffffffff000, %rsi
-
-	movq	$512,   %rcx
-	rep ; movsq
-	jmp	0b
-3:
-
-	/* To be certain of avoiding problems with self-modifying code
-	 * I need to execute a serializing instruction here.
-	 * So I flush the TLB by reloading %cr3 here, it's handy,
-	 * and not processor dependent.
-	 */
-	movq	%cr3, %rax
-	movq	%rax, %cr3
-
-	/* set all of the registers to known values */
-	/* leave %rsp alone */
-
-	xorq	%rax, %rax
-	xorq	%rbx, %rbx
-	xorq    %rcx, %rcx
-	xorq    %rdx, %rdx
-	xorq    %rsi, %rsi
-	xorq    %rdi, %rdi
-	xorq    %rbp, %rbp
-	xorq	%r8,  %r8
-	xorq	%r9,  %r9
-	xorq	%r10, %r9
-	xorq	%r11, %r11
-	xorq	%r12, %r12
-	xorq	%r13, %r13
-	xorq	%r14, %r14
-	xorq	%r15, %r15
-
-	ret
diff --git a/arch/x86_64/kernel/setup64.c b/arch/x86_64/kernel/setup64.c
deleted file mode 100644
index 1200aaa..0000000
--- a/arch/x86_64/kernel/setup64.c
+++ /dev/null
@@ -1,289 +0,0 @@
-/* 
- * X86-64 specific CPU setup.
- * Copyright (C) 1995  Linus Torvalds
- * Copyright 2001, 2002, 2003 SuSE Labs / Andi Kleen.
- * See setup.c for older changelog.
- */ 
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/string.h>
-#include <linux/bootmem.h>
-#include <linux/bitops.h>
-#include <linux/module.h>
-#include <asm/bootsetup.h>
-#include <asm/pda.h>
-#include <asm/pgtable.h>
-#include <asm/processor.h>
-#include <asm/desc.h>
-#include <asm/atomic.h>
-#include <asm/mmu_context.h>
-#include <asm/smp.h>
-#include <asm/i387.h>
-#include <asm/percpu.h>
-#include <asm/proto.h>
-#include <asm/sections.h>
-
-char x86_boot_params[BOOT_PARAM_SIZE] __initdata;
-
-cpumask_t cpu_initialized __cpuinitdata = CPU_MASK_NONE;
-
-struct x8664_pda *_cpu_pda[NR_CPUS] __read_mostly;
-EXPORT_SYMBOL(_cpu_pda);
-struct x8664_pda boot_cpu_pda[NR_CPUS] __cacheline_aligned;
-
-struct desc_ptr idt_descr = { 256 * 16 - 1, (unsigned long) idt_table };
-
-char boot_cpu_stack[IRQSTACKSIZE] __attribute__((section(".bss.page_aligned")));
-
-unsigned long __supported_pte_mask __read_mostly = ~0UL;
-static int do_not_nx __cpuinitdata = 0;
-
-/* noexec=on|off
-Control non executable mappings for 64bit processes.
-
-on	Enable(default)
-off	Disable
-*/ 
-static int __init nonx_setup(char *str)
-{
-	if (!str)
-		return -EINVAL;
-	if (!strncmp(str, "on", 2)) {
-                __supported_pte_mask |= _PAGE_NX; 
- 		do_not_nx = 0; 
-	} else if (!strncmp(str, "off", 3)) {
-		do_not_nx = 1;
-		__supported_pte_mask &= ~_PAGE_NX;
-        }
-	return 0;
-} 
-early_param("noexec", nonx_setup);
-
-int force_personality32 = 0; 
-
-/* noexec32=on|off
-Control non executable heap for 32bit processes.
-To control the stack too use noexec=off
-
-on	PROT_READ does not imply PROT_EXEC for 32bit processes
-off	PROT_READ implies PROT_EXEC (default)
-*/
-static int __init nonx32_setup(char *str)
-{
-	if (!strcmp(str, "on"))
-		force_personality32 &= ~READ_IMPLIES_EXEC;
-	else if (!strcmp(str, "off"))
-		force_personality32 |= READ_IMPLIES_EXEC;
-	return 1;
-}
-__setup("noexec32=", nonx32_setup);
-
-/*
- * Great future plan:
- * Declare PDA itself and support (irqstack,tss,pgd) as per cpu data.
- * Always point %gs to its beginning
- */
-void __init setup_per_cpu_areas(void)
-{ 
-	int i;
-	unsigned long size;
-
-#ifdef CONFIG_HOTPLUG_CPU
-	prefill_possible_map();
-#endif
-
-	/* Copy section for each CPU (we discard the original) */
-	size = PERCPU_ENOUGH_ROOM;
-
-	printk(KERN_INFO "PERCPU: Allocating %lu bytes of per cpu data\n", size);
-	for_each_cpu_mask (i, cpu_possible_map) {
-		char *ptr;
-
-		if (!NODE_DATA(cpu_to_node(i))) {
-			printk("cpu with no node %d, num_online_nodes %d\n",
-			       i, num_online_nodes());
-			ptr = alloc_bootmem_pages(size);
-		} else { 
-			ptr = alloc_bootmem_pages_node(NODE_DATA(cpu_to_node(i)), size);
-		}
-		if (!ptr)
-			panic("Cannot allocate cpu data for CPU %d\n", i);
-		cpu_pda(i)->data_offset = ptr - __per_cpu_start;
-		memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
-	}
-} 
-
-void pda_init(int cpu)
-{ 
-	struct x8664_pda *pda = cpu_pda(cpu);
-
-	/* Setup up data that may be needed in __get_free_pages early */
-	asm volatile("movl %0,%%fs ; movl %0,%%gs" :: "r" (0)); 
-	/* Memory clobbers used to order PDA accessed */
-	mb();
-	wrmsrl(MSR_GS_BASE, pda);
-	mb();
-
-	pda->cpunumber = cpu; 
-	pda->irqcount = -1;
-	pda->kernelstack = 
-		(unsigned long)stack_thread_info() - PDA_STACKOFFSET + THREAD_SIZE; 
-	pda->active_mm = &init_mm;
-	pda->mmu_state = 0;
-
-	if (cpu == 0) {
-		/* others are initialized in smpboot.c */
-		pda->pcurrent = &init_task;
-		pda->irqstackptr = boot_cpu_stack; 
-	} else {
-		pda->irqstackptr = (char *)
-			__get_free_pages(GFP_ATOMIC, IRQSTACK_ORDER);
-		if (!pda->irqstackptr)
-			panic("cannot allocate irqstack for cpu %d", cpu); 
-	}
-
-
-	pda->irqstackptr += IRQSTACKSIZE-64;
-} 
-
-char boot_exception_stacks[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ + DEBUG_STKSZ]
-__attribute__((section(".bss.page_aligned")));
-
-extern asmlinkage void ignore_sysret(void);
-
-/* May not be marked __init: used by software suspend */
-void syscall_init(void)
-{
-	/* 
-	 * LSTAR and STAR live in a bit strange symbiosis.
-	 * They both write to the same internal register. STAR allows to set CS/DS
-	 * but only a 32bit target. LSTAR sets the 64bit rip. 	 
-	 */ 
-	wrmsrl(MSR_STAR,  ((u64)__USER32_CS)<<48  | ((u64)__KERNEL_CS)<<32); 
-	wrmsrl(MSR_LSTAR, system_call); 
-	wrmsrl(MSR_CSTAR, ignore_sysret);
-
-#ifdef CONFIG_IA32_EMULATION   		
-	syscall32_cpu_init ();
-#endif
-
-	/* Flags to clear on syscall */
-	wrmsrl(MSR_SYSCALL_MASK, EF_TF|EF_DF|EF_IE|0x3000); 
-}
-
-void __cpuinit check_efer(void)
-{
-	unsigned long efer;
-
-	rdmsrl(MSR_EFER, efer); 
-        if (!(efer & EFER_NX) || do_not_nx) { 
-                __supported_pte_mask &= ~_PAGE_NX; 
-        }       
-}
-
-unsigned long kernel_eflags;
-
-/*
- * cpu_init() initializes state that is per-CPU. Some data is already
- * initialized (naturally) in the bootstrap process, such as the GDT
- * and IDT. We reload them nevertheless, this function acts as a
- * 'CPU state barrier', nothing should get across.
- * A lot of state is already set up in PDA init.
- */
-void __cpuinit cpu_init (void)
-{
-	int cpu = stack_smp_processor_id();
-	struct tss_struct *t = &per_cpu(init_tss, cpu);
-	struct orig_ist *orig_ist = &per_cpu(orig_ist, cpu);
-	unsigned long v; 
-	char *estacks = NULL; 
-	struct task_struct *me;
-	int i;
-
-	/* CPU 0 is initialised in head64.c */
-	if (cpu != 0) {
-		pda_init(cpu);
-	} else 
-		estacks = boot_exception_stacks; 
-
-	me = current;
-
-	if (cpu_test_and_set(cpu, cpu_initialized))
-		panic("CPU#%d already initialized!\n", cpu);
-
-	printk("Initializing CPU#%d\n", cpu);
-
-	clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE);
-
-	/*
-	 * Initialize the per-CPU GDT with the boot GDT,
-	 * and set up the GDT descriptor:
-	 */
-	if (cpu)
- 		memcpy(cpu_gdt(cpu), cpu_gdt_table, GDT_SIZE);
-
-	cpu_gdt_descr[cpu].size = GDT_SIZE;
-	asm volatile("lgdt %0" :: "m" (cpu_gdt_descr[cpu]));
-	asm volatile("lidt %0" :: "m" (idt_descr));
-
-	memset(me->thread.tls_array, 0, GDT_ENTRY_TLS_ENTRIES * 8);
-	syscall_init();
-
-	wrmsrl(MSR_FS_BASE, 0);
-	wrmsrl(MSR_KERNEL_GS_BASE, 0);
-	barrier(); 
-
-	check_efer();
-
-	/*
-	 * set up and load the per-CPU TSS
-	 */
-	for (v = 0; v < N_EXCEPTION_STACKS; v++) {
-		static const unsigned int order[N_EXCEPTION_STACKS] = {
-			[0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STACK_ORDER,
-			[DEBUG_STACK - 1] = DEBUG_STACK_ORDER
-		};
-		if (cpu) {
-			estacks = (char *)__get_free_pages(GFP_ATOMIC, order[v]);
-			if (!estacks)
-				panic("Cannot allocate exception stack %ld %d\n",
-				      v, cpu); 
-		}
-		estacks += PAGE_SIZE << order[v];
-		orig_ist->ist[v] = t->ist[v] = (unsigned long)estacks;
-	}
-
-	t->io_bitmap_base = offsetof(struct tss_struct, io_bitmap);
-	/*
-	 * <= is required because the CPU will access up to
-	 * 8 bits beyond the end of the IO permission bitmap.
-	 */
-	for (i = 0; i <= IO_BITMAP_LONGS; i++)
-		t->io_bitmap[i] = ~0UL;
-
-	atomic_inc(&init_mm.mm_count);
-	me->active_mm = &init_mm;
-	if (me->mm)
-		BUG();
-	enter_lazy_tlb(&init_mm, me);
-
-	set_tss_desc(cpu, t);
-	load_TR_desc();
-	load_LDT(&init_mm.context);
-
-	/*
-	 * Clear all 6 debug registers:
-	 */
-
-	set_debugreg(0UL, 0);
-	set_debugreg(0UL, 1);
-	set_debugreg(0UL, 2);
-	set_debugreg(0UL, 3);
-	set_debugreg(0UL, 6);
-	set_debugreg(0UL, 7);
-
-	fpu_init(); 
-
-	raw_local_save_flags(kernel_eflags);
-}
diff --git a/arch/x86_64/kernel/setup_64.c b/arch/x86_64/kernel/setup_64.c
deleted file mode 100644
index af838f6..0000000
--- a/arch/x86_64/kernel/setup_64.c
+++ /dev/null
@@ -1,1117 +0,0 @@
-/*
- *  linux/arch/x86-64/kernel/setup.c
- *
- *  Copyright (C) 1995  Linus Torvalds
- *
- *  Nov 2001 Dave Jones <davej@suse.de>
- *  Forked from i386 setup code.
- */
-
-/*
- * This file handles the architecture-dependent parts of initialization
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/user.h>
-#include <linux/a.out.h>
-#include <linux/screen_info.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/initrd.h>
-#include <linux/highmem.h>
-#include <linux/bootmem.h>
-#include <linux/module.h>
-#include <asm/processor.h>
-#include <linux/console.h>
-#include <linux/seq_file.h>
-#include <linux/crash_dump.h>
-#include <linux/root_dev.h>
-#include <linux/pci.h>
-#include <linux/acpi.h>
-#include <linux/kallsyms.h>
-#include <linux/edd.h>
-#include <linux/mmzone.h>
-#include <linux/kexec.h>
-#include <linux/cpufreq.h>
-#include <linux/dmi.h>
-#include <linux/dma-mapping.h>
-#include <linux/ctype.h>
-
-#include <asm/mtrr.h>
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/smp.h>
-#include <asm/msr.h>
-#include <asm/desc.h>
-#include <video/edid.h>
-#include <asm/e820.h>
-#include <asm/dma.h>
-#include <asm/mpspec.h>
-#include <asm/mmu_context.h>
-#include <asm/bootsetup.h>
-#include <asm/proto.h>
-#include <asm/setup.h>
-#include <asm/mach_apic.h>
-#include <asm/numa.h>
-#include <asm/sections.h>
-#include <asm/dmi.h>
-
-/*
- * Machine setup..
- */
-
-struct cpuinfo_x86 boot_cpu_data __read_mostly;
-EXPORT_SYMBOL(boot_cpu_data);
-
-unsigned long mmu_cr4_features;
-
-/* Boot loader ID as an integer, for the benefit of proc_dointvec */
-int bootloader_type;
-
-unsigned long saved_video_mode;
-
-int force_mwait __cpuinitdata;
-
-/* 
- * Early DMI memory
- */
-int dmi_alloc_index;
-char dmi_alloc_data[DMI_MAX_DATA];
-
-/*
- * Setup options
- */
-struct screen_info screen_info;
-EXPORT_SYMBOL(screen_info);
-struct sys_desc_table_struct {
-	unsigned short length;
-	unsigned char table[0];
-};
-
-struct edid_info edid_info;
-EXPORT_SYMBOL_GPL(edid_info);
-
-extern int root_mountflags;
-
-char __initdata command_line[COMMAND_LINE_SIZE];
-
-struct resource standard_io_resources[] = {
-	{ .name = "dma1", .start = 0x00, .end = 0x1f,
-		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
-	{ .name = "pic1", .start = 0x20, .end = 0x21,
-		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
-	{ .name = "timer0", .start = 0x40, .end = 0x43,
-		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
-	{ .name = "timer1", .start = 0x50, .end = 0x53,
-		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
-	{ .name = "keyboard", .start = 0x60, .end = 0x6f,
-		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
-	{ .name = "dma page reg", .start = 0x80, .end = 0x8f,
-		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
-	{ .name = "pic2", .start = 0xa0, .end = 0xa1,
-		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
-	{ .name = "dma2", .start = 0xc0, .end = 0xdf,
-		.flags = IORESOURCE_BUSY | IORESOURCE_IO },
-	{ .name = "fpu", .start = 0xf0, .end = 0xff,
-		.flags = IORESOURCE_BUSY | IORESOURCE_IO }
-};
-
-#define IORESOURCE_RAM (IORESOURCE_BUSY | IORESOURCE_MEM)
-
-struct resource data_resource = {
-	.name = "Kernel data",
-	.start = 0,
-	.end = 0,
-	.flags = IORESOURCE_RAM,
-};
-struct resource code_resource = {
-	.name = "Kernel code",
-	.start = 0,
-	.end = 0,
-	.flags = IORESOURCE_RAM,
-};
-
-#ifdef CONFIG_PROC_VMCORE
-/* elfcorehdr= specifies the location of elf core header
- * stored by the crashed kernel. This option will be passed
- * by kexec loader to the capture kernel.
- */
-static int __init setup_elfcorehdr(char *arg)
-{
-	char *end;
-	if (!arg)
-		return -EINVAL;
-	elfcorehdr_addr = memparse(arg, &end);
-	return end > arg ? 0 : -EINVAL;
-}
-early_param("elfcorehdr", setup_elfcorehdr);
-#endif
-
-#ifndef CONFIG_NUMA
-static void __init
-contig_initmem_init(unsigned long start_pfn, unsigned long end_pfn)
-{
-	unsigned long bootmap_size, bootmap;
-
-	bootmap_size = bootmem_bootmap_pages(end_pfn)<<PAGE_SHIFT;
-	bootmap = find_e820_area(0, end_pfn<<PAGE_SHIFT, bootmap_size);
-	if (bootmap == -1L)
-		panic("Cannot find bootmem map of size %ld\n",bootmap_size);
-	bootmap_size = init_bootmem(bootmap >> PAGE_SHIFT, end_pfn);
-	e820_register_active_regions(0, start_pfn, end_pfn);
-	free_bootmem_with_active_regions(0, end_pfn);
-	reserve_bootmem(bootmap, bootmap_size);
-} 
-#endif
-
-#if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE)
-struct edd edd;
-#ifdef CONFIG_EDD_MODULE
-EXPORT_SYMBOL(edd);
-#endif
-/**
- * copy_edd() - Copy the BIOS EDD information
- *              from boot_params into a safe place.
- *
- */
-static inline void copy_edd(void)
-{
-     memcpy(edd.mbr_signature, EDD_MBR_SIGNATURE, sizeof(edd.mbr_signature));
-     memcpy(edd.edd_info, EDD_BUF, sizeof(edd.edd_info));
-     edd.mbr_signature_nr = EDD_MBR_SIG_NR;
-     edd.edd_info_nr = EDD_NR;
-}
-#else
-static inline void copy_edd(void)
-{
-}
-#endif
-
-#define EBDA_ADDR_POINTER 0x40E
-
-unsigned __initdata ebda_addr;
-unsigned __initdata ebda_size;
-
-static void discover_ebda(void)
-{
-	/*
-	 * there is a real-mode segmented pointer pointing to the 
-	 * 4K EBDA area at 0x40E
-	 */
-	ebda_addr = *(unsigned short *)__va(EBDA_ADDR_POINTER);
-	ebda_addr <<= 4;
-
-	ebda_size = *(unsigned short *)__va(ebda_addr);
-
-	/* Round EBDA up to pages */
-	if (ebda_size == 0)
-		ebda_size = 1;
-	ebda_size <<= 10;
-	ebda_size = round_up(ebda_size + (ebda_addr & ~PAGE_MASK), PAGE_SIZE);
-	if (ebda_size > 64*1024)
-		ebda_size = 64*1024;
-}
-
-void __init setup_arch(char **cmdline_p)
-{
-	printk(KERN_INFO "Command line: %s\n", boot_command_line);
-
- 	ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV);
- 	screen_info = SCREEN_INFO;
-	edid_info = EDID_INFO;
-	saved_video_mode = SAVED_VIDEO_MODE;
-	bootloader_type = LOADER_TYPE;
-
-#ifdef CONFIG_BLK_DEV_RAM
-	rd_image_start = RAMDISK_FLAGS & RAMDISK_IMAGE_START_MASK;
-	rd_prompt = ((RAMDISK_FLAGS & RAMDISK_PROMPT_FLAG) != 0);
-	rd_doload = ((RAMDISK_FLAGS & RAMDISK_LOAD_FLAG) != 0);
-#endif
-	setup_memory_region();
-	copy_edd();
-
-	if (!MOUNT_ROOT_RDONLY)
-		root_mountflags &= ~MS_RDONLY;
-	init_mm.start_code = (unsigned long) &_text;
-	init_mm.end_code = (unsigned long) &_etext;
-	init_mm.end_data = (unsigned long) &_edata;
-	init_mm.brk = (unsigned long) &_end;
-
-	code_resource.start = virt_to_phys(&_text);
-	code_resource.end = virt_to_phys(&_etext)-1;
-	data_resource.start = virt_to_phys(&_etext);
-	data_resource.end = virt_to_phys(&_edata)-1;
-
-	early_identify_cpu(&boot_cpu_data);
-
-	strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
-	*cmdline_p = command_line;
-
-	parse_early_param();
-
-	finish_e820_parsing();
-
-	e820_register_active_regions(0, 0, -1UL);
-	/*
-	 * partially used pages are not usable - thus
-	 * we are rounding upwards:
-	 */
-	end_pfn = e820_end_of_ram();
-	num_physpages = end_pfn;
-
-	check_efer();
-
-	discover_ebda();
-
-	init_memory_mapping(0, (end_pfn_map << PAGE_SHIFT));
-
-	dmi_scan_machine();
-
-#ifdef CONFIG_ACPI
-	/*
-	 * Initialize the ACPI boot-time table parser (gets the RSDP and SDT).
-	 * Call this early for SRAT node setup.
-	 */
-	acpi_boot_table_init();
-#endif
-
-	/* How many end-of-memory variables you have, grandma! */
-	max_low_pfn = end_pfn;
-	max_pfn = end_pfn;
-	high_memory = (void *)__va(end_pfn * PAGE_SIZE - 1) + 1;
-
-	/* Remove active ranges so rediscovery with NUMA-awareness happens */
-	remove_all_active_ranges();
-
-#ifdef CONFIG_ACPI_NUMA
-	/*
-	 * Parse SRAT to discover nodes.
-	 */
-	acpi_numa_init();
-#endif
-
-#ifdef CONFIG_NUMA
-	numa_initmem_init(0, end_pfn); 
-#else
-	contig_initmem_init(0, end_pfn);
-#endif
-
-	/* Reserve direct mapping */
-	reserve_bootmem_generic(table_start << PAGE_SHIFT, 
-				(table_end - table_start) << PAGE_SHIFT);
-
-	/* reserve kernel */
-	reserve_bootmem_generic(__pa_symbol(&_text),
-				__pa_symbol(&_end) - __pa_symbol(&_text));
-
-	/*
-	 * reserve physical page 0 - it's a special BIOS page on many boxes,
-	 * enabling clean reboots, SMP operation, laptop functions.
-	 */
-	reserve_bootmem_generic(0, PAGE_SIZE);
-
-	/* reserve ebda region */
-	if (ebda_addr)
-		reserve_bootmem_generic(ebda_addr, ebda_size);
-#ifdef CONFIG_NUMA
-	/* reserve nodemap region */
-	if (nodemap_addr)
-		reserve_bootmem_generic(nodemap_addr, nodemap_size);
-#endif
-
-#ifdef CONFIG_SMP
-	/* Reserve SMP trampoline */
-	reserve_bootmem_generic(SMP_TRAMPOLINE_BASE, 2*PAGE_SIZE);
-#endif
-
-#ifdef CONFIG_ACPI_SLEEP
-       /*
-        * Reserve low memory region for sleep support.
-        */
-       acpi_reserve_bootmem();
-#endif
-	/*
-	 * Find and reserve possible boot-time SMP configuration:
-	 */
-	find_smp_config();
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (LOADER_TYPE && INITRD_START) {
-		if (INITRD_START + INITRD_SIZE <= (end_pfn << PAGE_SHIFT)) {
-			reserve_bootmem_generic(INITRD_START, INITRD_SIZE);
-			initrd_start = INITRD_START + PAGE_OFFSET;
-			initrd_end = initrd_start+INITRD_SIZE;
-		}
-		else {
-			printk(KERN_ERR "initrd extends beyond end of memory "
-			    "(0x%08lx > 0x%08lx)\ndisabling initrd\n",
-			    (unsigned long)(INITRD_START + INITRD_SIZE),
-			    (unsigned long)(end_pfn << PAGE_SHIFT));
-			initrd_start = 0;
-		}
-	}
-#endif
-#ifdef CONFIG_KEXEC
-	if (crashk_res.start != crashk_res.end) {
-		reserve_bootmem_generic(crashk_res.start,
-			crashk_res.end - crashk_res.start + 1);
-	}
-#endif
-
-	paging_init();
-
-#ifdef CONFIG_PCI
-	early_quirks();
-#endif
-
-	/*
-	 * set this early, so we dont allocate cpu0
-	 * if MADT list doesnt list BSP first
-	 * mpparse.c/MP_processor_info() allocates logical cpu numbers.
-	 */
-	cpu_set(0, cpu_present_map);
-#ifdef CONFIG_ACPI
-	/*
-	 * Read APIC and some other early information from ACPI tables.
-	 */
-	acpi_boot_init();
-#endif
-
-	init_cpu_to_node();
-
-	/*
-	 * get boot-time SMP configuration:
-	 */
-	if (smp_found_config)
-		get_smp_config();
-	init_apic_mappings();
-
-	/*
-	 * We trust e820 completely. No explicit ROM probing in memory.
- 	 */
-	e820_reserve_resources(); 
-	e820_mark_nosave_regions();
-
-	{
-	unsigned i;
-	/* request I/O space for devices used on all i[345]86 PCs */
-	for (i = 0; i < ARRAY_SIZE(standard_io_resources); i++)
-		request_resource(&ioport_resource, &standard_io_resources[i]);
-	}
-
-	e820_setup_gap();
-
-#ifdef CONFIG_VT
-#if defined(CONFIG_VGA_CONSOLE)
-	conswitchp = &vga_con;
-#elif defined(CONFIG_DUMMY_CONSOLE)
-	conswitchp = &dummy_con;
-#endif
-#endif
-}
-
-static int __cpuinit get_model_name(struct cpuinfo_x86 *c)
-{
-	unsigned int *v;
-
-	if (c->extended_cpuid_level < 0x80000004)
-		return 0;
-
-	v = (unsigned int *) c->x86_model_id;
-	cpuid(0x80000002, &v[0], &v[1], &v[2], &v[3]);
-	cpuid(0x80000003, &v[4], &v[5], &v[6], &v[7]);
-	cpuid(0x80000004, &v[8], &v[9], &v[10], &v[11]);
-	c->x86_model_id[48] = 0;
-	return 1;
-}
-
-
-static void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c)
-{
-	unsigned int n, dummy, eax, ebx, ecx, edx;
-
-	n = c->extended_cpuid_level;
-
-	if (n >= 0x80000005) {
-		cpuid(0x80000005, &dummy, &ebx, &ecx, &edx);
-		printk(KERN_INFO "CPU: L1 I Cache: %dK (%d bytes/line), D cache %dK (%d bytes/line)\n",
-			edx>>24, edx&0xFF, ecx>>24, ecx&0xFF);
-		c->x86_cache_size=(ecx>>24)+(edx>>24);
-		/* On K8 L1 TLB is inclusive, so don't count it */
-		c->x86_tlbsize = 0;
-	}
-
-	if (n >= 0x80000006) {
-		cpuid(0x80000006, &dummy, &ebx, &ecx, &edx);
-		ecx = cpuid_ecx(0x80000006);
-		c->x86_cache_size = ecx >> 16;
-		c->x86_tlbsize += ((ebx >> 16) & 0xfff) + (ebx & 0xfff);
-
-		printk(KERN_INFO "CPU: L2 Cache: %dK (%d bytes/line)\n",
-		c->x86_cache_size, ecx & 0xFF);
-	}
-
-	if (n >= 0x80000007)
-		cpuid(0x80000007, &dummy, &dummy, &dummy, &c->x86_power); 
-	if (n >= 0x80000008) {
-		cpuid(0x80000008, &eax, &dummy, &dummy, &dummy); 
-		c->x86_virt_bits = (eax >> 8) & 0xff;
-		c->x86_phys_bits = eax & 0xff;
-	}
-}
-
-#ifdef CONFIG_NUMA
-static int nearby_node(int apicid)
-{
-	int i;
-	for (i = apicid - 1; i >= 0; i--) {
-		int node = apicid_to_node[i];
-		if (node != NUMA_NO_NODE && node_online(node))
-			return node;
-	}
-	for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) {
-		int node = apicid_to_node[i];
-		if (node != NUMA_NO_NODE && node_online(node))
-			return node;
-	}
-	return first_node(node_online_map); /* Shouldn't happen */
-}
-#endif
-
-/*
- * On a AMD dual core setup the lower bits of the APIC id distingush the cores.
- * Assumes number of cores is a power of two.
- */
-static void __init amd_detect_cmp(struct cpuinfo_x86 *c)
-{
-#ifdef CONFIG_SMP
-	unsigned bits;
-#ifdef CONFIG_NUMA
-	int cpu = smp_processor_id();
-	int node = 0;
-	unsigned apicid = hard_smp_processor_id();
-#endif
-	unsigned ecx = cpuid_ecx(0x80000008);
-
-	c->x86_max_cores = (ecx & 0xff) + 1;
-
-	/* CPU telling us the core id bits shift? */
-	bits = (ecx >> 12) & 0xF;
-
-	/* Otherwise recompute */
-	if (bits == 0) {
-		while ((1 << bits) < c->x86_max_cores)
-			bits++;
-	}
-
-	/* Low order bits define the core id (index of core in socket) */
-	c->cpu_core_id = c->phys_proc_id & ((1 << bits)-1);
-	/* Convert the APIC ID into the socket ID */
-	c->phys_proc_id = phys_pkg_id(bits);
-
-#ifdef CONFIG_NUMA
-  	node = c->phys_proc_id;
- 	if (apicid_to_node[apicid] != NUMA_NO_NODE)
- 		node = apicid_to_node[apicid];
- 	if (!node_online(node)) {
- 		/* Two possibilities here:
- 		   - The CPU is missing memory and no node was created.
- 		   In that case try picking one from a nearby CPU
- 		   - The APIC IDs differ from the HyperTransport node IDs
- 		   which the K8 northbridge parsing fills in.
- 		   Assume they are all increased by a constant offset,
- 		   but in the same order as the HT nodeids.
- 		   If that doesn't result in a usable node fall back to the
- 		   path for the previous case.  */
- 		int ht_nodeid = apicid - (cpu_data[0].phys_proc_id << bits);
- 		if (ht_nodeid >= 0 &&
- 		    apicid_to_node[ht_nodeid] != NUMA_NO_NODE)
- 			node = apicid_to_node[ht_nodeid];
- 		/* Pick a nearby node */
- 		if (!node_online(node))
- 			node = nearby_node(apicid);
- 	}
-	numa_set_node(cpu, node);
-
-	printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node);
-#endif
-#endif
-}
-
-static void __cpuinit init_amd(struct cpuinfo_x86 *c)
-{
-	unsigned level;
-
-#ifdef CONFIG_SMP
-	unsigned long value;
-
-	/*
-	 * Disable TLB flush filter by setting HWCR.FFDIS on K8
-	 * bit 6 of msr C001_0015
- 	 *
-	 * Errata 63 for SH-B3 steppings
-	 * Errata 122 for all steppings (F+ have it disabled by default)
-	 */
-	if (c->x86 == 15) {
-		rdmsrl(MSR_K8_HWCR, value);
-		value |= 1 << 6;
-		wrmsrl(MSR_K8_HWCR, value);
-	}
-#endif
-
-	/* Bit 31 in normal CPUID used for nonstandard 3DNow ID;
-	   3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */
-	clear_bit(0*32+31, &c->x86_capability);
-	
-	/* On C+ stepping K8 rep microcode works well for copy/memset */
-	level = cpuid_eax(1);
-	if (c->x86 == 15 && ((level >= 0x0f48 && level < 0x0f50) || level >= 0x0f58))
-		set_bit(X86_FEATURE_REP_GOOD, &c->x86_capability);
-	if (c->x86 == 0x10)
-		set_bit(X86_FEATURE_REP_GOOD, &c->x86_capability);
-
-	/* Enable workaround for FXSAVE leak */
-	if (c->x86 >= 6)
-		set_bit(X86_FEATURE_FXSAVE_LEAK, &c->x86_capability);
-
-	level = get_model_name(c);
-	if (!level) {
-		switch (c->x86) { 
-		case 15:
-			/* Should distinguish Models here, but this is only
-			   a fallback anyways. */
-			strcpy(c->x86_model_id, "Hammer");
-			break; 
-		} 
-	} 
-	display_cacheinfo(c);
-
-	/* c->x86_power is 8000_0007 edx. Bit 8 is constant TSC */
-	if (c->x86_power & (1<<8))
-		set_bit(X86_FEATURE_CONSTANT_TSC, &c->x86_capability);
-
-	/* Multi core CPU? */
-	if (c->extended_cpuid_level >= 0x80000008)
-		amd_detect_cmp(c);
-
-	if (c->extended_cpuid_level >= 0x80000006 &&
-		(cpuid_edx(0x80000006) & 0xf000))
-		num_cache_leaves = 4;
-	else
-		num_cache_leaves = 3;
-
-	if (c->x86 == 0xf || c->x86 == 0x10 || c->x86 == 0x11)
-		set_bit(X86_FEATURE_K8, &c->x86_capability);
-
-	/* RDTSC can be speculated around */
-	clear_bit(X86_FEATURE_SYNC_RDTSC, &c->x86_capability);
-
-	/* Family 10 doesn't support C states in MWAIT so don't use it */
-	if (c->x86 == 0x10 && !force_mwait)
-		clear_bit(X86_FEATURE_MWAIT, &c->x86_capability);
-}
-
-static void __cpuinit detect_ht(struct cpuinfo_x86 *c)
-{
-#ifdef CONFIG_SMP
-	u32 	eax, ebx, ecx, edx;
-	int 	index_msb, core_bits;
-
-	cpuid(1, &eax, &ebx, &ecx, &edx);
-
-
-	if (!cpu_has(c, X86_FEATURE_HT))
-		return;
- 	if (cpu_has(c, X86_FEATURE_CMP_LEGACY))
-		goto out;
-
-	smp_num_siblings = (ebx & 0xff0000) >> 16;
-
-	if (smp_num_siblings == 1) {
-		printk(KERN_INFO  "CPU: Hyper-Threading is disabled\n");
-	} else if (smp_num_siblings > 1 ) {
-
-		if (smp_num_siblings > NR_CPUS) {
-			printk(KERN_WARNING "CPU: Unsupported number of the siblings %d", smp_num_siblings);
-			smp_num_siblings = 1;
-			return;
-		}
-
-		index_msb = get_count_order(smp_num_siblings);
-		c->phys_proc_id = phys_pkg_id(index_msb);
-
-		smp_num_siblings = smp_num_siblings / c->x86_max_cores;
-
-		index_msb = get_count_order(smp_num_siblings) ;
-
-		core_bits = get_count_order(c->x86_max_cores);
-
-		c->cpu_core_id = phys_pkg_id(index_msb) &
-					       ((1 << core_bits) - 1);
-	}
-out:
-	if ((c->x86_max_cores * smp_num_siblings) > 1) {
-		printk(KERN_INFO  "CPU: Physical Processor ID: %d\n", c->phys_proc_id);
-		printk(KERN_INFO  "CPU: Processor Core ID: %d\n", c->cpu_core_id);
-	}
-
-#endif
-}
-
-/*
- * find out the number of processor cores on the die
- */
-static int __cpuinit intel_num_cpu_cores(struct cpuinfo_x86 *c)
-{
-	unsigned int eax, t;
-
-	if (c->cpuid_level < 4)
-		return 1;
-
-	cpuid_count(4, 0, &eax, &t, &t, &t);
-
-	if (eax & 0x1f)
-		return ((eax >> 26) + 1);
-	else
-		return 1;
-}
-
-static void srat_detect_node(void)
-{
-#ifdef CONFIG_NUMA
-	unsigned node;
-	int cpu = smp_processor_id();
-	int apicid = hard_smp_processor_id();
-
-	/* Don't do the funky fallback heuristics the AMD version employs
-	   for now. */
-	node = apicid_to_node[apicid];
-	if (node == NUMA_NO_NODE)
-		node = first_node(node_online_map);
-	numa_set_node(cpu, node);
-
-	printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node);
-#endif
-}
-
-static void __cpuinit init_intel(struct cpuinfo_x86 *c)
-{
-	/* Cache sizes */
-	unsigned n;
-
-	init_intel_cacheinfo(c);
-	if (c->cpuid_level > 9 ) {
-		unsigned eax = cpuid_eax(10);
-		/* Check for version and the number of counters */
-		if ((eax & 0xff) && (((eax>>8) & 0xff) > 1))
-			set_bit(X86_FEATURE_ARCH_PERFMON, &c->x86_capability);
-	}
-
-	if (cpu_has_ds) {
-		unsigned int l1, l2;
-		rdmsr(MSR_IA32_MISC_ENABLE, l1, l2);
-		if (!(l1 & (1<<11)))
-			set_bit(X86_FEATURE_BTS, c->x86_capability);
-		if (!(l1 & (1<<12)))
-			set_bit(X86_FEATURE_PEBS, c->x86_capability);
-	}
-
-	n = c->extended_cpuid_level;
-	if (n >= 0x80000008) {
-		unsigned eax = cpuid_eax(0x80000008);
-		c->x86_virt_bits = (eax >> 8) & 0xff;
-		c->x86_phys_bits = eax & 0xff;
-		/* CPUID workaround for Intel 0F34 CPU */
-		if (c->x86_vendor == X86_VENDOR_INTEL &&
-		    c->x86 == 0xF && c->x86_model == 0x3 &&
-		    c->x86_mask == 0x4)
-			c->x86_phys_bits = 36;
-	}
-
-	if (c->x86 == 15)
-		c->x86_cache_alignment = c->x86_clflush_size * 2;
-	if ((c->x86 == 0xf && c->x86_model >= 0x03) ||
-	    (c->x86 == 0x6 && c->x86_model >= 0x0e))
-		set_bit(X86_FEATURE_CONSTANT_TSC, &c->x86_capability);
-	if (c->x86 == 6)
-		set_bit(X86_FEATURE_REP_GOOD, &c->x86_capability);
-	if (c->x86 == 15)
-		set_bit(X86_FEATURE_SYNC_RDTSC, &c->x86_capability);
-	else
-		clear_bit(X86_FEATURE_SYNC_RDTSC, &c->x86_capability);
- 	c->x86_max_cores = intel_num_cpu_cores(c);
-
-	srat_detect_node();
-}
-
-static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c)
-{
-	char *v = c->x86_vendor_id;
-
-	if (!strcmp(v, "AuthenticAMD"))
-		c->x86_vendor = X86_VENDOR_AMD;
-	else if (!strcmp(v, "GenuineIntel"))
-		c->x86_vendor = X86_VENDOR_INTEL;
-	else
-		c->x86_vendor = X86_VENDOR_UNKNOWN;
-}
-
-struct cpu_model_info {
-	int vendor;
-	int family;
-	char *model_names[16];
-};
-
-/* Do some early cpuid on the boot CPU to get some parameter that are
-   needed before check_bugs. Everything advanced is in identify_cpu
-   below. */
-void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c)
-{
-	u32 tfms;
-
-	c->loops_per_jiffy = loops_per_jiffy;
-	c->x86_cache_size = -1;
-	c->x86_vendor = X86_VENDOR_UNKNOWN;
-	c->x86_model = c->x86_mask = 0;	/* So far unknown... */
-	c->x86_vendor_id[0] = '\0'; /* Unset */
-	c->x86_model_id[0] = '\0';  /* Unset */
-	c->x86_clflush_size = 64;
-	c->x86_cache_alignment = c->x86_clflush_size;
-	c->x86_max_cores = 1;
-	c->extended_cpuid_level = 0;
-	memset(&c->x86_capability, 0, sizeof c->x86_capability);
-
-	/* Get vendor name */
-	cpuid(0x00000000, (unsigned int *)&c->cpuid_level,
-	      (unsigned int *)&c->x86_vendor_id[0],
-	      (unsigned int *)&c->x86_vendor_id[8],
-	      (unsigned int *)&c->x86_vendor_id[4]);
-		
-	get_cpu_vendor(c);
-
-	/* Initialize the standard set of capabilities */
-	/* Note that the vendor-specific code below might override */
-
-	/* Intel-defined flags: level 0x00000001 */
-	if (c->cpuid_level >= 0x00000001) {
-		__u32 misc;
-		cpuid(0x00000001, &tfms, &misc, &c->x86_capability[4],
-		      &c->x86_capability[0]);
-		c->x86 = (tfms >> 8) & 0xf;
-		c->x86_model = (tfms >> 4) & 0xf;
-		c->x86_mask = tfms & 0xf;
-		if (c->x86 == 0xf)
-			c->x86 += (tfms >> 20) & 0xff;
-		if (c->x86 >= 0x6)
-			c->x86_model += ((tfms >> 16) & 0xF) << 4;
-		if (c->x86_capability[0] & (1<<19)) 
-			c->x86_clflush_size = ((misc >> 8) & 0xff) * 8;
-	} else {
-		/* Have CPUID level 0 only - unheard of */
-		c->x86 = 4;
-	}
-
-#ifdef CONFIG_SMP
-	c->phys_proc_id = (cpuid_ebx(1) >> 24) & 0xff;
-#endif
-}
-
-/*
- * This does the hard work of actually picking apart the CPU stuff...
- */
-void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
-{
-	int i;
-	u32 xlvl;
-
-	early_identify_cpu(c);
-
-	/* AMD-defined flags: level 0x80000001 */
-	xlvl = cpuid_eax(0x80000000);
-	c->extended_cpuid_level = xlvl;
-	if ((xlvl & 0xffff0000) == 0x80000000) {
-		if (xlvl >= 0x80000001) {
-			c->x86_capability[1] = cpuid_edx(0x80000001);
-			c->x86_capability[6] = cpuid_ecx(0x80000001);
-		}
-		if (xlvl >= 0x80000004)
-			get_model_name(c); /* Default name */
-	}
-
-	/* Transmeta-defined flags: level 0x80860001 */
-	xlvl = cpuid_eax(0x80860000);
-	if ((xlvl & 0xffff0000) == 0x80860000) {
-		/* Don't set x86_cpuid_level here for now to not confuse. */
-		if (xlvl >= 0x80860001)
-			c->x86_capability[2] = cpuid_edx(0x80860001);
-	}
-
-	init_scattered_cpuid_features(c);
-
-	c->apicid = phys_pkg_id(0);
-
-	/*
-	 * Vendor-specific initialization.  In this section we
-	 * canonicalize the feature flags, meaning if there are
-	 * features a certain CPU supports which CPUID doesn't
-	 * tell us, CPUID claiming incorrect flags, or other bugs,
-	 * we handle them here.
-	 *
-	 * At the end of this section, c->x86_capability better
-	 * indicate the features this CPU genuinely supports!
-	 */
-	switch (c->x86_vendor) {
-	case X86_VENDOR_AMD:
-		init_amd(c);
-		break;
-
-	case X86_VENDOR_INTEL:
-		init_intel(c);
-		break;
-
-	case X86_VENDOR_UNKNOWN:
-	default:
-		display_cacheinfo(c);
-		break;
-	}
-
-	select_idle_routine(c);
-	detect_ht(c); 
-
-	/*
-	 * On SMP, boot_cpu_data holds the common feature set between
-	 * all CPUs; so make sure that we indicate which features are
-	 * common between the CPUs.  The first time this routine gets
-	 * executed, c == &boot_cpu_data.
-	 */
-	if (c != &boot_cpu_data) {
-		/* AND the already accumulated flags with these */
-		for (i = 0 ; i < NCAPINTS ; i++)
-			boot_cpu_data.x86_capability[i] &= c->x86_capability[i];
-	}
-
-#ifdef CONFIG_X86_MCE
-	mcheck_init(c);
-#endif
-	if (c != &boot_cpu_data)
-		mtrr_ap_init();
-#ifdef CONFIG_NUMA
-	numa_add_cpu(smp_processor_id());
-#endif
-}
- 
-
-void __cpuinit print_cpu_info(struct cpuinfo_x86 *c)
-{
-	if (c->x86_model_id[0])
-		printk("%s", c->x86_model_id);
-
-	if (c->x86_mask || c->cpuid_level >= 0) 
-		printk(" stepping %02x\n", c->x86_mask);
-	else
-		printk("\n");
-}
-
-/*
- *	Get CPU information for use by the procfs.
- */
-
-static int show_cpuinfo(struct seq_file *m, void *v)
-{
-	struct cpuinfo_x86 *c = v;
-
-	/* 
-	 * These flag bits must match the definitions in <asm/cpufeature.h>.
-	 * NULL means this bit is undefined or reserved; either way it doesn't
-	 * have meaning as far as Linux is concerned.  Note that it's important
-	 * to realize there is a difference between this table and CPUID -- if
-	 * applications want to get the raw CPUID data, they should access
-	 * /dev/cpu/<cpu_nr>/cpuid instead.
-	 */
-	static char *x86_cap_flags[] = {
-		/* Intel-defined */
-	        "fpu", "vme", "de", "pse", "tsc", "msr", "pae", "mce",
-	        "cx8", "apic", NULL, "sep", "mtrr", "pge", "mca", "cmov",
-	        "pat", "pse36", "pn", "clflush", NULL, "dts", "acpi", "mmx",
-	        "fxsr", "sse", "sse2", "ss", "ht", "tm", "ia64", "pbe",
-
-		/* AMD-defined */
-		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-		NULL, NULL, NULL, "syscall", NULL, NULL, NULL, NULL,
-		NULL, NULL, NULL, NULL, "nx", NULL, "mmxext", NULL,
-		NULL, "fxsr_opt", "pdpe1gb", "rdtscp", NULL, "lm",
-		"3dnowext", "3dnow",
-
-		/* Transmeta-defined */
-		"recovery", "longrun", NULL, "lrti", NULL, NULL, NULL, NULL,
-		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-
-		/* Other (Linux-defined) */
-		"cxmmx", "k6_mtrr", "cyrix_arr", "centaur_mcr",
-		NULL, NULL, NULL, NULL,
-		"constant_tsc", "up", NULL, "arch_perfmon",
-		"pebs", "bts", NULL, "sync_rdtsc",
-		"rep_good", NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-
-		/* Intel-defined (#2) */
-		"pni", NULL, NULL, "monitor", "ds_cpl", "vmx", "smx", "est",
-		"tm2", "ssse3", "cid", NULL, NULL, "cx16", "xtpr", NULL,
-		NULL, NULL, "dca", NULL, NULL, NULL, NULL, "popcnt",
-		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-
-		/* VIA/Cyrix/Centaur-defined */
-		NULL, NULL, "rng", "rng_en", NULL, NULL, "ace", "ace_en",
-		"ace2", "ace2_en", "phe", "phe_en", "pmm", "pmm_en", NULL, NULL,
-		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-
-		/* AMD-defined (#2) */
-		"lahf_lm", "cmp_legacy", "svm", "extapic", "cr8_legacy",
-		"altmovcr8", "abm", "sse4a",
-		"misalignsse", "3dnowprefetch",
-		"osvw", "ibs", NULL, NULL, NULL, NULL,
-		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-
-		/* Auxiliary (Linux-defined) */
-		"ida", NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-	};
-	static char *x86_power_flags[] = { 
-		"ts",	/* temperature sensor */
-		"fid",  /* frequency id control */
-		"vid",  /* voltage id control */
-		"ttp",  /* thermal trip */
-		"tm",
-		"stc",
-		"100mhzsteps",
-		"hwpstate",
-		"",	/* tsc invariant mapped to constant_tsc */
-		/* nothing */
-	};
-
-
-#ifdef CONFIG_SMP
-	if (!cpu_online(c-cpu_data))
-		return 0;
-#endif
-
-	seq_printf(m,"processor\t: %u\n"
-		     "vendor_id\t: %s\n"
-		     "cpu family\t: %d\n"
-		     "model\t\t: %d\n"
-		     "model name\t: %s\n",
-		     (unsigned)(c-cpu_data),
-		     c->x86_vendor_id[0] ? c->x86_vendor_id : "unknown",
-		     c->x86,
-		     (int)c->x86_model,
-		     c->x86_model_id[0] ? c->x86_model_id : "unknown");
-	
-	if (c->x86_mask || c->cpuid_level >= 0)
-		seq_printf(m, "stepping\t: %d\n", c->x86_mask);
-	else
-		seq_printf(m, "stepping\t: unknown\n");
-	
-	if (cpu_has(c,X86_FEATURE_TSC)) {
-		unsigned int freq = cpufreq_quick_get((unsigned)(c-cpu_data));
-		if (!freq)
-			freq = cpu_khz;
-		seq_printf(m, "cpu MHz\t\t: %u.%03u\n",
-			     freq / 1000, (freq % 1000));
-	}
-
-	/* Cache size */
-	if (c->x86_cache_size >= 0) 
-		seq_printf(m, "cache size\t: %d KB\n", c->x86_cache_size);
-	
-#ifdef CONFIG_SMP
-	if (smp_num_siblings * c->x86_max_cores > 1) {
-		int cpu = c - cpu_data;
-		seq_printf(m, "physical id\t: %d\n", c->phys_proc_id);
-		seq_printf(m, "siblings\t: %d\n", cpus_weight(cpu_core_map[cpu]));
-		seq_printf(m, "core id\t\t: %d\n", c->cpu_core_id);
-		seq_printf(m, "cpu cores\t: %d\n", c->booted_cores);
-	}
-#endif	
-
-	seq_printf(m,
-	        "fpu\t\t: yes\n"
-	        "fpu_exception\t: yes\n"
-	        "cpuid level\t: %d\n"
-	        "wp\t\t: yes\n"
-	        "flags\t\t:",
-		   c->cpuid_level);
-
-	{ 
-		int i; 
-		for ( i = 0 ; i < 32*NCAPINTS ; i++ )
-			if (cpu_has(c, i) && x86_cap_flags[i] != NULL)
-				seq_printf(m, " %s", x86_cap_flags[i]);
-	}
-		
-	seq_printf(m, "\nbogomips\t: %lu.%02lu\n",
-		   c->loops_per_jiffy/(500000/HZ),
-		   (c->loops_per_jiffy/(5000/HZ)) % 100);
-
-	if (c->x86_tlbsize > 0) 
-		seq_printf(m, "TLB size\t: %d 4K pages\n", c->x86_tlbsize);
-	seq_printf(m, "clflush size\t: %d\n", c->x86_clflush_size);
-	seq_printf(m, "cache_alignment\t: %d\n", c->x86_cache_alignment);
-
-	seq_printf(m, "address sizes\t: %u bits physical, %u bits virtual\n", 
-		   c->x86_phys_bits, c->x86_virt_bits);
-
-	seq_printf(m, "power management:");
-	{
-		unsigned i;
-		for (i = 0; i < 32; i++) 
-			if (c->x86_power & (1 << i)) {
-				if (i < ARRAY_SIZE(x86_power_flags) &&
-					x86_power_flags[i])
-					seq_printf(m, "%s%s",
-						x86_power_flags[i][0]?" ":"",
-						x86_power_flags[i]);
-				else
-					seq_printf(m, " [%d]", i);
-			}
-	}
-
-	seq_printf(m, "\n\n");
-
-	return 0;
-}
-
-static void *c_start(struct seq_file *m, loff_t *pos)
-{
-	return *pos < NR_CPUS ? cpu_data + *pos : NULL;
-}
-
-static void *c_next(struct seq_file *m, void *v, loff_t *pos)
-{
-	++*pos;
-	return c_start(m, pos);
-}
-
-static void c_stop(struct seq_file *m, void *v)
-{
-}
-
-struct seq_operations cpuinfo_op = {
-	.start =c_start,
-	.next =	c_next,
-	.stop =	c_stop,
-	.show =	show_cpuinfo,
-};
diff --git a/arch/x86_64/kernel/signal_64.c b/arch/x86_64/kernel/signal_64.c
deleted file mode 100644
index 739175b..0000000
--- a/arch/x86_64/kernel/signal_64.c
+++ /dev/null
@@ -1,495 +0,0 @@
-/*
- *  linux/arch/x86_64/kernel/signal.c
- *
- *  Copyright (C) 1991, 1992  Linus Torvalds
- *  Copyright (C) 2000, 2001, 2002 Andi Kleen SuSE Labs
- *
- *  1997-11-28  Modified for POSIX.1b signals by Richard Henderson
- *  2000-06-20  Pentium III FXSR, SSE support by Gareth Hughes
- *  2000-2002   x86-64 support by Andi Kleen
- */
-
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/kernel.h>
-#include <linux/signal.h>
-#include <linux/errno.h>
-#include <linux/wait.h>
-#include <linux/ptrace.h>
-#include <linux/unistd.h>
-#include <linux/stddef.h>
-#include <linux/personality.h>
-#include <linux/compiler.h>
-#include <asm/ucontext.h>
-#include <asm/uaccess.h>
-#include <asm/i387.h>
-#include <asm/proto.h>
-#include <asm/ia32_unistd.h>
-#include <asm/mce.h>
-
-/* #define DEBUG_SIG 1 */
-
-#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
-
-int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
-               sigset_t *set, struct pt_regs * regs); 
-int ia32_setup_frame(int sig, struct k_sigaction *ka,
-            sigset_t *set, struct pt_regs * regs); 
-
-asmlinkage long
-sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
-		struct pt_regs *regs)
-{
-	return do_sigaltstack(uss, uoss, regs->rsp);
-}
-
-
-/*
- * Do a signal return; undo the signal stack.
- */
-
-struct rt_sigframe
-{
-	char __user *pretcode;
-	struct ucontext uc;
-	struct siginfo info;
-};
-
-static int
-restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, unsigned long *prax)
-{
-	unsigned int err = 0;
-
-	/* Always make any pending restarted system calls return -EINTR */
-	current_thread_info()->restart_block.fn = do_no_restart_syscall;
-
-#define COPY(x)		err |= __get_user(regs->x, &sc->x)
-
-	COPY(rdi); COPY(rsi); COPY(rbp); COPY(rsp); COPY(rbx);
-	COPY(rdx); COPY(rcx); COPY(rip);
-	COPY(r8);
-	COPY(r9);
-	COPY(r10);
-	COPY(r11);
-	COPY(r12);
-	COPY(r13);
-	COPY(r14);
-	COPY(r15);
-
-	/* Kernel saves and restores only the CS segment register on signals,
-	 * which is the bare minimum needed to allow mixed 32/64-bit code.
-	 * App's signal handler can save/restore other segments if needed. */
-	{
-		unsigned cs;
-		err |= __get_user(cs, &sc->cs);
-		regs->cs = cs | 3;	/* Force into user mode */
-	}
-
-	{
-		unsigned int tmpflags;
-		err |= __get_user(tmpflags, &sc->eflags);
-		regs->eflags = (regs->eflags & ~0x40DD5) | (tmpflags & 0x40DD5);
-		regs->orig_rax = -1;		/* disable syscall checks */
-	}
-
-	{
-		struct _fpstate __user * buf;
-		err |= __get_user(buf, &sc->fpstate);
-
-		if (buf) {
-			if (!access_ok(VERIFY_READ, buf, sizeof(*buf)))
-				goto badframe;
-			err |= restore_i387(buf);
-		} else {
-			struct task_struct *me = current;
-			if (used_math()) {
-				clear_fpu(me);
-				clear_used_math();
-			}
-		}
-	}
-
-	err |= __get_user(*prax, &sc->rax);
-	return err;
-
-badframe:
-	return 1;
-}
-
-asmlinkage long sys_rt_sigreturn(struct pt_regs *regs)
-{
-	struct rt_sigframe __user *frame;
-	sigset_t set;
-	unsigned long eax;
-
-	frame = (struct rt_sigframe __user *)(regs->rsp - 8);
-	if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) {
-		goto badframe;
-	} 
-	if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set))) { 
-		goto badframe;
-	} 
-
-	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-	
-	if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &eax))
-		goto badframe;
-
-#ifdef DEBUG_SIG
-	printk("%d sigreturn rip:%lx rsp:%lx frame:%p rax:%lx\n",current->pid,regs->rip,regs->rsp,frame,eax);
-#endif
-
-	if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->rsp) == -EFAULT)
-		goto badframe;
-
-	return eax;
-
-badframe:
-	signal_fault(regs,frame,"sigreturn");
-	return 0;
-}	
-
-/*
- * Set up a signal frame.
- */
-
-static inline int
-setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, unsigned long mask, struct task_struct *me)
-{
-	int err = 0;
-
-	err |= __put_user(regs->cs, &sc->cs);
-	err |= __put_user(0, &sc->gs);
-	err |= __put_user(0, &sc->fs);
-
-	err |= __put_user(regs->rdi, &sc->rdi);
-	err |= __put_user(regs->rsi, &sc->rsi);
-	err |= __put_user(regs->rbp, &sc->rbp);
-	err |= __put_user(regs->rsp, &sc->rsp);
-	err |= __put_user(regs->rbx, &sc->rbx);
-	err |= __put_user(regs->rdx, &sc->rdx);
-	err |= __put_user(regs->rcx, &sc->rcx);
-	err |= __put_user(regs->rax, &sc->rax);
-	err |= __put_user(regs->r8, &sc->r8);
-	err |= __put_user(regs->r9, &sc->r9);
-	err |= __put_user(regs->r10, &sc->r10);
-	err |= __put_user(regs->r11, &sc->r11);
-	err |= __put_user(regs->r12, &sc->r12);
-	err |= __put_user(regs->r13, &sc->r13);
-	err |= __put_user(regs->r14, &sc->r14);
-	err |= __put_user(regs->r15, &sc->r15);
-	err |= __put_user(me->thread.trap_no, &sc->trapno);
-	err |= __put_user(me->thread.error_code, &sc->err);
-	err |= __put_user(regs->rip, &sc->rip);
-	err |= __put_user(regs->eflags, &sc->eflags);
-	err |= __put_user(mask, &sc->oldmask);
-	err |= __put_user(me->thread.cr2, &sc->cr2);
-
-	return err;
-}
-
-/*
- * Determine which stack to use..
- */
-
-static void __user *
-get_stack(struct k_sigaction *ka, struct pt_regs *regs, unsigned long size)
-{
-	unsigned long rsp;
-
-	/* Default to using normal stack - redzone*/
-	rsp = regs->rsp - 128;
-
-	/* This is the X/Open sanctioned signal stack switching.  */
-	if (ka->sa.sa_flags & SA_ONSTACK) {
-		if (sas_ss_flags(rsp) == 0)
-			rsp = current->sas_ss_sp + current->sas_ss_size;
-	}
-
-	return (void __user *)round_down(rsp - size, 16); 
-}
-
-static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
-			   sigset_t *set, struct pt_regs * regs)
-{
-	struct rt_sigframe __user *frame;
-	struct _fpstate __user *fp = NULL; 
-	int err = 0;
-	struct task_struct *me = current;
-
-	if (used_math()) {
-		fp = get_stack(ka, regs, sizeof(struct _fpstate)); 
-		frame = (void __user *)round_down(
-			(unsigned long)fp - sizeof(struct rt_sigframe), 16) - 8;
-
-		if (!access_ok(VERIFY_WRITE, fp, sizeof(struct _fpstate)))
-			goto give_sigsegv;
-
-		if (save_i387(fp) < 0) 
-			err |= -1; 
-	} else
-		frame = get_stack(ka, regs, sizeof(struct rt_sigframe)) - 8;
-
-	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
-		goto give_sigsegv;
-
-	if (ka->sa.sa_flags & SA_SIGINFO) { 
-		err |= copy_siginfo_to_user(&frame->info, info);
-		if (err)
-			goto give_sigsegv;
-	}
-		
-	/* Create the ucontext.  */
-	err |= __put_user(0, &frame->uc.uc_flags);
-	err |= __put_user(0, &frame->uc.uc_link);
-	err |= __put_user(me->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
-	err |= __put_user(sas_ss_flags(regs->rsp),
-			  &frame->uc.uc_stack.ss_flags);
-	err |= __put_user(me->sas_ss_size, &frame->uc.uc_stack.ss_size);
-	err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, set->sig[0], me);
-	err |= __put_user(fp, &frame->uc.uc_mcontext.fpstate);
-	if (sizeof(*set) == 16) { 
-		__put_user(set->sig[0], &frame->uc.uc_sigmask.sig[0]);
-		__put_user(set->sig[1], &frame->uc.uc_sigmask.sig[1]); 
-	} else
-		err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
-
-	/* Set up to return from userspace.  If provided, use a stub
-	   already in userspace.  */
-	/* x86-64 should always use SA_RESTORER. */
-	if (ka->sa.sa_flags & SA_RESTORER) {
-		err |= __put_user(ka->sa.sa_restorer, &frame->pretcode);
-	} else {
-		/* could use a vstub here */
-		goto give_sigsegv; 
-	}
-
-	if (err)
-		goto give_sigsegv;
-
-#ifdef DEBUG_SIG
-	printk("%d old rip %lx old rsp %lx old rax %lx\n", current->pid,regs->rip,regs->rsp,regs->rax);
-#endif
-
-	/* Set up registers for signal handler */
-	regs->rdi = sig;
-	/* In case the signal handler was declared without prototypes */ 
-	regs->rax = 0;	
-
-	/* This also works for non SA_SIGINFO handlers because they expect the
-	   next argument after the signal number on the stack. */
-	regs->rsi = (unsigned long)&frame->info; 
-	regs->rdx = (unsigned long)&frame->uc; 
-	regs->rip = (unsigned long) ka->sa.sa_handler;
-
-	regs->rsp = (unsigned long)frame;
-
-	/* Set up the CS register to run signal handlers in 64-bit mode,
-	   even if the handler happens to be interrupting 32-bit code. */
-	regs->cs = __USER_CS;
-
-	/* This, by contrast, has nothing to do with segment registers -
-	   see include/asm-x86_64/uaccess.h for details. */
-	set_fs(USER_DS);
-
-	regs->eflags &= ~TF_MASK;
-	if (test_thread_flag(TIF_SINGLESTEP))
-		ptrace_notify(SIGTRAP);
-#ifdef DEBUG_SIG
-	printk("SIG deliver (%s:%d): sp=%p pc=%lx ra=%p\n",
-		current->comm, current->pid, frame, regs->rip, frame->pretcode);
-#endif
-
-	return 0;
-
-give_sigsegv:
-	force_sigsegv(sig, current);
-	return -EFAULT;
-}
-
-/*
- * OK, we're invoking a handler
- */	
-
-static int
-handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
-		sigset_t *oldset, struct pt_regs *regs)
-{
-	int ret;
-
-#ifdef DEBUG_SIG
-	printk("handle_signal pid:%d sig:%lu rip:%lx rsp:%lx regs=%p\n",
-		current->pid, sig,
-		regs->rip, regs->rsp, regs);
-#endif
-
-	/* Are we from a system call? */
-	if ((long)regs->orig_rax >= 0) {
-		/* If so, check system call restarting.. */
-		switch (regs->rax) {
-		        case -ERESTART_RESTARTBLOCK:
-			case -ERESTARTNOHAND:
-				regs->rax = -EINTR;
-				break;
-
-			case -ERESTARTSYS:
-				if (!(ka->sa.sa_flags & SA_RESTART)) {
-					regs->rax = -EINTR;
-					break;
-				}
-				/* fallthrough */
-			case -ERESTARTNOINTR:
-				regs->rax = regs->orig_rax;
-				regs->rip -= 2;
-				break;
-		}
-	}
-
-	/*
-	 * If TF is set due to a debugger (PT_DTRACE), clear the TF
-	 * flag so that register information in the sigcontext is
-	 * correct.
-	 */
-	if (unlikely(regs->eflags & TF_MASK)) {
-		if (likely(current->ptrace & PT_DTRACE)) {
-			current->ptrace &= ~PT_DTRACE;
-			regs->eflags &= ~TF_MASK;
-		}
-	}
-
-#ifdef CONFIG_IA32_EMULATION
-	if (test_thread_flag(TIF_IA32)) {
-		if (ka->sa.sa_flags & SA_SIGINFO)
-			ret = ia32_setup_rt_frame(sig, ka, info, oldset, regs);
-		else
-			ret = ia32_setup_frame(sig, ka, oldset, regs);
-	} else 
-#endif
-	ret = setup_rt_frame(sig, ka, info, oldset, regs);
-
-	if (ret == 0) {
-		spin_lock_irq(&current->sighand->siglock);
-		sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
-		if (!(ka->sa.sa_flags & SA_NODEFER))
-			sigaddset(&current->blocked,sig);
-		recalc_sigpending();
-		spin_unlock_irq(&current->sighand->siglock);
-	}
-
-	return ret;
-}
-
-/*
- * Note that 'init' is a special process: it doesn't get signals it doesn't
- * want to handle. Thus you cannot kill init even with a SIGKILL even by
- * mistake.
- */
-static void do_signal(struct pt_regs *regs)
-{
-	struct k_sigaction ka;
-	siginfo_t info;
-	int signr;
-	sigset_t *oldset;
-
-	/*
-	 * We want the common case to go fast, which
-	 * is why we may in certain cases get here from
-	 * kernel mode. Just return without doing anything
-	 * if so.
-	 */
-	if (!user_mode(regs))
-		return;
-
-	if (test_thread_flag(TIF_RESTORE_SIGMASK))
-		oldset = &current->saved_sigmask;
-	else
-		oldset = &current->blocked;
-
-	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
-	if (signr > 0) {
-		/* Reenable any watchpoints before delivering the
-		 * signal to user space. The processor register will
-		 * have been cleared if the watchpoint triggered
-		 * inside the kernel.
-		 */
-		if (current->thread.debugreg7)
-			set_debugreg(current->thread.debugreg7, 7);
-
-		/* Whee!  Actually deliver the signal.  */
-		if (handle_signal(signr, &info, &ka, oldset, regs) == 0) {
-			/* a signal was successfully delivered; the saved
-			 * sigmask will have been stored in the signal frame,
-			 * and will be restored by sigreturn, so we can simply
-			 * clear the TIF_RESTORE_SIGMASK flag */
-			clear_thread_flag(TIF_RESTORE_SIGMASK);
-		}
-		return;
-	}
-
-	/* Did we come from a system call? */
-	if ((long)regs->orig_rax >= 0) {
-		/* Restart the system call - no handlers present */
-		long res = regs->rax;
-		switch (res) {
-		case -ERESTARTNOHAND:
-		case -ERESTARTSYS:
-		case -ERESTARTNOINTR:
-			regs->rax = regs->orig_rax;
-			regs->rip -= 2;
-			break;
-		case -ERESTART_RESTARTBLOCK:
-			regs->rax = test_thread_flag(TIF_IA32) ?
-					__NR_ia32_restart_syscall :
-					__NR_restart_syscall;
-			regs->rip -= 2;
-			break;
-		}
-	}
-
-	/* if there's no signal to deliver, we just put the saved sigmask
-	   back. */
-	if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
-		clear_thread_flag(TIF_RESTORE_SIGMASK);
-		sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
-	}
-}
-
-void
-do_notify_resume(struct pt_regs *regs, void *unused, __u32 thread_info_flags)
-{
-#ifdef DEBUG_SIG
-	printk("do_notify_resume flags:%x rip:%lx rsp:%lx caller:%p pending:%x\n",
-	       thread_info_flags, regs->rip, regs->rsp, __builtin_return_address(0),signal_pending(current)); 
-#endif
-	       
-	/* Pending single-step? */
-	if (thread_info_flags & _TIF_SINGLESTEP) {
-		regs->eflags |= TF_MASK;
-		clear_thread_flag(TIF_SINGLESTEP);
-	}
-
-#ifdef CONFIG_X86_MCE
-	/* notify userspace of pending MCEs */
-	if (thread_info_flags & _TIF_MCE_NOTIFY)
-		mce_notify_user();
-#endif /* CONFIG_X86_MCE */
-
-	/* deal with pending signal delivery */
-	if (thread_info_flags & (_TIF_SIGPENDING|_TIF_RESTORE_SIGMASK))
-		do_signal(regs);
-}
-
-void signal_fault(struct pt_regs *regs, void __user *frame, char *where)
-{ 
-	struct task_struct *me = current; 
-	if (show_unhandled_signals && printk_ratelimit())
-		printk("%s[%d] bad frame in %s frame:%p rip:%lx rsp:%lx orax:%lx\n",
-	       me->comm,me->pid,where,frame,regs->rip,regs->rsp,regs->orig_rax); 
-
-	force_sig(SIGSEGV, me); 
-} 
diff --git a/arch/x86_64/kernel/smp_64.c b/arch/x86_64/kernel/smp_64.c
deleted file mode 100644
index df4a828..0000000
--- a/arch/x86_64/kernel/smp_64.c
+++ /dev/null
@@ -1,523 +0,0 @@
-/*
- *	Intel SMP support routines.
- *
- *	(c) 1995 Alan Cox, Building #3 <alan@redhat.com>
- *	(c) 1998-99, 2000 Ingo Molnar <mingo@redhat.com>
- *      (c) 2002,2003 Andi Kleen, SuSE Labs.
- *
- *	This code is released under the GNU General Public License version 2 or
- *	later.
- */
-
-#include <linux/init.h>
-
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/spinlock.h>
-#include <linux/smp.h>
-#include <linux/kernel_stat.h>
-#include <linux/mc146818rtc.h>
-#include <linux/interrupt.h>
-
-#include <asm/mtrr.h>
-#include <asm/pgalloc.h>
-#include <asm/tlbflush.h>
-#include <asm/mach_apic.h>
-#include <asm/mmu_context.h>
-#include <asm/proto.h>
-#include <asm/apicdef.h>
-#include <asm/idle.h>
-
-/*
- *	Smarter SMP flushing macros. 
- *		c/o Linus Torvalds.
- *
- *	These mean you can really definitely utterly forget about
- *	writing to user space from interrupts. (Its not allowed anyway).
- *
- *	Optimizations Manfred Spraul <manfred@colorfullife.com>
- *
- * 	More scalable flush, from Andi Kleen
- *
- * 	To avoid global state use 8 different call vectors.
- * 	Each CPU uses a specific vector to trigger flushes on other
- * 	CPUs. Depending on the received vector the target CPUs look into
- *	the right per cpu variable for the flush data.
- *
- * 	With more than 8 CPUs they are hashed to the 8 available
- * 	vectors. The limited global vector space forces us to this right now.
- *	In future when interrupts are split into per CPU domains this could be
- *	fixed, at the cost of triggering multiple IPIs in some cases.
- */
-
-union smp_flush_state {
-	struct {
-		cpumask_t flush_cpumask;
-		struct mm_struct *flush_mm;
-		unsigned long flush_va;
-#define FLUSH_ALL	-1ULL
-		spinlock_t tlbstate_lock;
-	};
-	char pad[SMP_CACHE_BYTES];
-} ____cacheline_aligned;
-
-/* State is put into the per CPU data section, but padded
-   to a full cache line because other CPUs can access it and we don't
-   want false sharing in the per cpu data segment. */
-static DEFINE_PER_CPU(union smp_flush_state, flush_state);
-
-/*
- * We cannot call mmdrop() because we are in interrupt context, 
- * instead update mm->cpu_vm_mask.
- */
-static inline void leave_mm(int cpu)
-{
-	if (read_pda(mmu_state) == TLBSTATE_OK)
-		BUG();
-	cpu_clear(cpu, read_pda(active_mm)->cpu_vm_mask);
-	load_cr3(swapper_pg_dir);
-}
-
-/*
- *
- * The flush IPI assumes that a thread switch happens in this order:
- * [cpu0: the cpu that switches]
- * 1) switch_mm() either 1a) or 1b)
- * 1a) thread switch to a different mm
- * 1a1) cpu_clear(cpu, old_mm->cpu_vm_mask);
- * 	Stop ipi delivery for the old mm. This is not synchronized with
- * 	the other cpus, but smp_invalidate_interrupt ignore flush ipis
- * 	for the wrong mm, and in the worst case we perform a superfluous
- * 	tlb flush.
- * 1a2) set cpu mmu_state to TLBSTATE_OK
- * 	Now the smp_invalidate_interrupt won't call leave_mm if cpu0
- *	was in lazy tlb mode.
- * 1a3) update cpu active_mm
- * 	Now cpu0 accepts tlb flushes for the new mm.
- * 1a4) cpu_set(cpu, new_mm->cpu_vm_mask);
- * 	Now the other cpus will send tlb flush ipis.
- * 1a4) change cr3.
- * 1b) thread switch without mm change
- *	cpu active_mm is correct, cpu0 already handles
- *	flush ipis.
- * 1b1) set cpu mmu_state to TLBSTATE_OK
- * 1b2) test_and_set the cpu bit in cpu_vm_mask.
- * 	Atomically set the bit [other cpus will start sending flush ipis],
- * 	and test the bit.
- * 1b3) if the bit was 0: leave_mm was called, flush the tlb.
- * 2) switch %%esp, ie current
- *
- * The interrupt must handle 2 special cases:
- * - cr3 is changed before %%esp, ie. it cannot use current->{active_,}mm.
- * - the cpu performs speculative tlb reads, i.e. even if the cpu only
- *   runs in kernel space, the cpu could load tlb entries for user space
- *   pages.
- *
- * The good news is that cpu mmu_state is local to each cpu, no
- * write/read ordering problems.
- */
-
-/*
- * TLB flush IPI:
- *
- * 1) Flush the tlb entries if the cpu uses the mm that's being flushed.
- * 2) Leave the mm if we are in the lazy tlb mode.
- *
- * Interrupts are disabled.
- */
-
-asmlinkage void smp_invalidate_interrupt(struct pt_regs *regs)
-{
-	int cpu;
-	int sender;
-	union smp_flush_state *f;
-
-	cpu = smp_processor_id();
-	/*
-	 * orig_rax contains the negated interrupt vector.
-	 * Use that to determine where the sender put the data.
-	 */
-	sender = ~regs->orig_rax - INVALIDATE_TLB_VECTOR_START;
-	f = &per_cpu(flush_state, sender);
-
-	if (!cpu_isset(cpu, f->flush_cpumask))
-		goto out;
-		/* 
-		 * This was a BUG() but until someone can quote me the
-		 * line from the intel manual that guarantees an IPI to
-		 * multiple CPUs is retried _only_ on the erroring CPUs
-		 * its staying as a return
-		 *
-		 * BUG();
-		 */
-		 
-	if (f->flush_mm == read_pda(active_mm)) {
-		if (read_pda(mmu_state) == TLBSTATE_OK) {
-			if (f->flush_va == FLUSH_ALL)
-				local_flush_tlb();
-			else
-				__flush_tlb_one(f->flush_va);
-		} else
-			leave_mm(cpu);
-	}
-out:
-	ack_APIC_irq();
-	cpu_clear(cpu, f->flush_cpumask);
-}
-
-static void flush_tlb_others(cpumask_t cpumask, struct mm_struct *mm,
-						unsigned long va)
-{
-	int sender;
-	union smp_flush_state *f;
-
-	/* Caller has disabled preemption */
-	sender = smp_processor_id() % NUM_INVALIDATE_TLB_VECTORS;
-	f = &per_cpu(flush_state, sender);
-
-	/* Could avoid this lock when
-	   num_online_cpus() <= NUM_INVALIDATE_TLB_VECTORS, but it is
-	   probably not worth checking this for a cache-hot lock. */
-	spin_lock(&f->tlbstate_lock);
-
-	f->flush_mm = mm;
-	f->flush_va = va;
-	cpus_or(f->flush_cpumask, cpumask, f->flush_cpumask);
-
-	/*
-	 * We have to send the IPI only to
-	 * CPUs affected.
-	 */
-	send_IPI_mask(cpumask, INVALIDATE_TLB_VECTOR_START + sender);
-
-	while (!cpus_empty(f->flush_cpumask))
-		cpu_relax();
-
-	f->flush_mm = NULL;
-	f->flush_va = 0;
-	spin_unlock(&f->tlbstate_lock);
-}
-
-int __cpuinit init_smp_flush(void)
-{
-	int i;
-	for_each_cpu_mask(i, cpu_possible_map) {
-		spin_lock_init(&per_cpu(flush_state, i).tlbstate_lock);
-	}
-	return 0;
-}
-
-core_initcall(init_smp_flush);
-	
-void flush_tlb_current_task(void)
-{
-	struct mm_struct *mm = current->mm;
-	cpumask_t cpu_mask;
-
-	preempt_disable();
-	cpu_mask = mm->cpu_vm_mask;
-	cpu_clear(smp_processor_id(), cpu_mask);
-
-	local_flush_tlb();
-	if (!cpus_empty(cpu_mask))
-		flush_tlb_others(cpu_mask, mm, FLUSH_ALL);
-	preempt_enable();
-}
-EXPORT_SYMBOL(flush_tlb_current_task);
-
-void flush_tlb_mm (struct mm_struct * mm)
-{
-	cpumask_t cpu_mask;
-
-	preempt_disable();
-	cpu_mask = mm->cpu_vm_mask;
-	cpu_clear(smp_processor_id(), cpu_mask);
-
-	if (current->active_mm == mm) {
-		if (current->mm)
-			local_flush_tlb();
-		else
-			leave_mm(smp_processor_id());
-	}
-	if (!cpus_empty(cpu_mask))
-		flush_tlb_others(cpu_mask, mm, FLUSH_ALL);
-
-	preempt_enable();
-}
-EXPORT_SYMBOL(flush_tlb_mm);
-
-void flush_tlb_page(struct vm_area_struct * vma, unsigned long va)
-{
-	struct mm_struct *mm = vma->vm_mm;
-	cpumask_t cpu_mask;
-
-	preempt_disable();
-	cpu_mask = mm->cpu_vm_mask;
-	cpu_clear(smp_processor_id(), cpu_mask);
-
-	if (current->active_mm == mm) {
-		if(current->mm)
-			__flush_tlb_one(va);
-		 else
-		 	leave_mm(smp_processor_id());
-	}
-
-	if (!cpus_empty(cpu_mask))
-		flush_tlb_others(cpu_mask, mm, va);
-
-	preempt_enable();
-}
-EXPORT_SYMBOL(flush_tlb_page);
-
-static void do_flush_tlb_all(void* info)
-{
-	unsigned long cpu = smp_processor_id();
-
-	__flush_tlb_all();
-	if (read_pda(mmu_state) == TLBSTATE_LAZY)
-		leave_mm(cpu);
-}
-
-void flush_tlb_all(void)
-{
-	on_each_cpu(do_flush_tlb_all, NULL, 1, 1);
-}
-
-/*
- * this function sends a 'reschedule' IPI to another CPU.
- * it goes straight through and wastes no time serializing
- * anything. Worst case is that we lose a reschedule ...
- */
-
-void smp_send_reschedule(int cpu)
-{
-	send_IPI_mask(cpumask_of_cpu(cpu), RESCHEDULE_VECTOR);
-}
-
-/*
- * Structure and data for smp_call_function(). This is designed to minimise
- * static memory requirements. It also looks cleaner.
- */
-static DEFINE_SPINLOCK(call_lock);
-
-struct call_data_struct {
-	void (*func) (void *info);
-	void *info;
-	atomic_t started;
-	atomic_t finished;
-	int wait;
-};
-
-static struct call_data_struct * call_data;
-
-void lock_ipi_call_lock(void)
-{
-	spin_lock_irq(&call_lock);
-}
-
-void unlock_ipi_call_lock(void)
-{
-	spin_unlock_irq(&call_lock);
-}
-
-/*
- * this function sends a 'generic call function' IPI to one other CPU
- * in the system.
- *
- * cpu is a standard Linux logical CPU number.
- */
-static void
-__smp_call_function_single(int cpu, void (*func) (void *info), void *info,
-				int nonatomic, int wait)
-{
-	struct call_data_struct data;
-	int cpus = 1;
-
-	data.func = func;
-	data.info = info;
-	atomic_set(&data.started, 0);
-	data.wait = wait;
-	if (wait)
-		atomic_set(&data.finished, 0);
-
-	call_data = &data;
-	wmb();
-	/* Send a message to all other CPUs and wait for them to respond */
-	send_IPI_mask(cpumask_of_cpu(cpu), CALL_FUNCTION_VECTOR);
-
-	/* Wait for response */
-	while (atomic_read(&data.started) != cpus)
-		cpu_relax();
-
-	if (!wait)
-		return;
-
-	while (atomic_read(&data.finished) != cpus)
-		cpu_relax();
-}
-
-/*
- * smp_call_function_single - Run a function on a specific CPU
- * @func: The function to run. This must be fast and non-blocking.
- * @info: An arbitrary pointer to pass to the function.
- * @nonatomic: Currently unused.
- * @wait: If true, wait until function has completed on other CPUs.
- *
- * Retrurns 0 on success, else a negative status code.
- *
- * Does not return until the remote CPU is nearly ready to execute <func>
- * or is or has executed.
- */
-
-int smp_call_function_single (int cpu, void (*func) (void *info), void *info,
-	int nonatomic, int wait)
-{
-	/* prevent preemption and reschedule on another processor */
-	int me = get_cpu();
-
-	/* Can deadlock when called with interrupts disabled */
-	WARN_ON(irqs_disabled());
-
-	if (cpu == me) {
-		local_irq_disable();
-		func(info);
-		local_irq_enable();
-		put_cpu();
-		return 0;
-	}
-
-	spin_lock(&call_lock);
-	__smp_call_function_single(cpu, func, info, nonatomic, wait);
-	spin_unlock(&call_lock);
-	put_cpu();
-	return 0;
-}
-EXPORT_SYMBOL(smp_call_function_single);
-
-/*
- * this function sends a 'generic call function' IPI to all other CPUs
- * in the system.
- */
-static void __smp_call_function (void (*func) (void *info), void *info,
-				int nonatomic, int wait)
-{
-	struct call_data_struct data;
-	int cpus = num_online_cpus()-1;
-
-	if (!cpus)
-		return;
-
-	data.func = func;
-	data.info = info;
-	atomic_set(&data.started, 0);
-	data.wait = wait;
-	if (wait)
-		atomic_set(&data.finished, 0);
-
-	call_data = &data;
-	wmb();
-	/* Send a message to all other CPUs and wait for them to respond */
-	send_IPI_allbutself(CALL_FUNCTION_VECTOR);
-
-	/* Wait for response */
-	while (atomic_read(&data.started) != cpus)
-		cpu_relax();
-
-	if (!wait)
-		return;
-
-	while (atomic_read(&data.finished) != cpus)
-		cpu_relax();
-}
-
-/*
- * smp_call_function - run a function on all other CPUs.
- * @func: The function to run. This must be fast and non-blocking.
- * @info: An arbitrary pointer to pass to the function.
- * @nonatomic: currently unused.
- * @wait: If true, wait (atomically) until function has completed on other
- *        CPUs.
- *
- * Returns 0 on success, else a negative status code. Does not return until
- * remote CPUs are nearly ready to execute func or are or have executed.
- *
- * You must not call this function with disabled interrupts or from a
- * hardware interrupt handler or from a bottom half handler.
- * Actually there are a few legal cases, like panic.
- */
-int smp_call_function (void (*func) (void *info), void *info, int nonatomic,
-			int wait)
-{
-	spin_lock(&call_lock);
-	__smp_call_function(func,info,nonatomic,wait);
-	spin_unlock(&call_lock);
-	return 0;
-}
-EXPORT_SYMBOL(smp_call_function);
-
-static void stop_this_cpu(void *dummy)
-{
-	local_irq_disable();
-	/*
-	 * Remove this CPU:
-	 */
-	cpu_clear(smp_processor_id(), cpu_online_map);
-	disable_local_APIC();
-	for (;;) 
-		halt();
-} 
-
-void smp_send_stop(void)
-{
-	int nolock;
-	unsigned long flags;
-
-	if (reboot_force)
-		return;
-
-	/* Don't deadlock on the call lock in panic */
-	nolock = !spin_trylock(&call_lock);
-	local_irq_save(flags);
-	__smp_call_function(stop_this_cpu, NULL, 0, 0);
-	if (!nolock)
-		spin_unlock(&call_lock);
-	disable_local_APIC();
-	local_irq_restore(flags);
-}
-
-/*
- * Reschedule call back. Nothing to do,
- * all the work is done automatically when
- * we return from the interrupt.
- */
-asmlinkage void smp_reschedule_interrupt(void)
-{
-	ack_APIC_irq();
-}
-
-asmlinkage void smp_call_function_interrupt(void)
-{
-	void (*func) (void *info) = call_data->func;
-	void *info = call_data->info;
-	int wait = call_data->wait;
-
-	ack_APIC_irq();
-	/*
-	 * Notify initiating CPU that I've grabbed the data and am
-	 * about to execute the function
-	 */
-	mb();
-	atomic_inc(&call_data->started);
-	/*
-	 * At this point the info structure may be out of scope unless wait==1
-	 */
-	exit_idle();
-	irq_enter();
-	(*func)(info);
-	irq_exit();
-	if (wait) {
-		mb();
-		atomic_inc(&call_data->finished);
-	}
-}
-
diff --git a/arch/x86_64/kernel/smpboot_64.c b/arch/x86_64/kernel/smpboot_64.c
deleted file mode 100644
index 32f5078..0000000
--- a/arch/x86_64/kernel/smpboot_64.c
+++ /dev/null
@@ -1,1085 +0,0 @@
-/*
- *	x86 SMP booting functions
- *
- *	(c) 1995 Alan Cox, Building #3 <alan@redhat.com>
- *	(c) 1998, 1999, 2000 Ingo Molnar <mingo@redhat.com>
- *	Copyright 2001 Andi Kleen, SuSE Labs.
- *
- *	Much of the core SMP work is based on previous work by Thomas Radke, to
- *	whom a great many thanks are extended.
- *
- *	Thanks to Intel for making available several different Pentium,
- *	Pentium Pro and Pentium-II/Xeon MP machines.
- *	Original development of Linux SMP code supported by Caldera.
- *
- *	This code is released under the GNU General Public License version 2
- *
- *	Fixes
- *		Felix Koop	:	NR_CPUS used properly
- *		Jose Renau	:	Handle single CPU case.
- *		Alan Cox	:	By repeated request 8) - Total BogoMIP report.
- *		Greg Wright	:	Fix for kernel stacks panic.
- *		Erich Boleyn	:	MP v1.4 and additional changes.
- *	Matthias Sattler	:	Changes for 2.1 kernel map.
- *	Michel Lespinasse	:	Changes for 2.1 kernel map.
- *	Michael Chastain	:	Change trampoline.S to gnu as.
- *		Alan Cox	:	Dumb bug: 'B' step PPro's are fine
- *		Ingo Molnar	:	Added APIC timers, based on code
- *					from Jose Renau
- *		Ingo Molnar	:	various cleanups and rewrites
- *		Tigran Aivazian	:	fixed "0.00 in /proc/uptime on SMP" bug.
- *	Maciej W. Rozycki	:	Bits for genuine 82489DX APICs
- *	Andi Kleen		:	Changed for SMP boot into long mode.
- *		Rusty Russell	:	Hacked into shape for new "hotplug" boot process.
- *      Andi Kleen              :       Converted to new state machine.
- *					Various cleanups.
- *					Probably mostly hotplug CPU ready now.
- *	Ashok Raj			: CPU hotplug support
- */
-
-
-#include <linux/init.h>
-
-#include <linux/mm.h>
-#include <linux/kernel_stat.h>
-#include <linux/bootmem.h>
-#include <linux/thread_info.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/mc146818rtc.h>
-#include <linux/smp.h>
-#include <linux/kdebug.h>
-
-#include <asm/mtrr.h>
-#include <asm/pgalloc.h>
-#include <asm/desc.h>
-#include <asm/tlbflush.h>
-#include <asm/proto.h>
-#include <asm/nmi.h>
-#include <asm/irq.h>
-#include <asm/hw_irq.h>
-#include <asm/numa.h>
-
-/* Number of siblings per CPU package */
-int smp_num_siblings = 1;
-EXPORT_SYMBOL(smp_num_siblings);
-
-/* Last level cache ID of each logical CPU */
-u8 cpu_llc_id[NR_CPUS] __cpuinitdata  = {[0 ... NR_CPUS-1] = BAD_APICID};
-
-/* Bitmask of currently online CPUs */
-cpumask_t cpu_online_map __read_mostly;
-
-EXPORT_SYMBOL(cpu_online_map);
-
-/*
- * Private maps to synchronize booting between AP and BP.
- * Probably not needed anymore, but it makes for easier debugging. -AK
- */
-cpumask_t cpu_callin_map;
-cpumask_t cpu_callout_map;
-EXPORT_SYMBOL(cpu_callout_map);
-
-cpumask_t cpu_possible_map;
-EXPORT_SYMBOL(cpu_possible_map);
-
-/* Per CPU bogomips and other parameters */
-struct cpuinfo_x86 cpu_data[NR_CPUS] __cacheline_aligned;
-EXPORT_SYMBOL(cpu_data);
-
-/* Set when the idlers are all forked */
-int smp_threads_ready;
-
-/* representing HT siblings of each logical CPU */
-cpumask_t cpu_sibling_map[NR_CPUS] __read_mostly;
-EXPORT_SYMBOL(cpu_sibling_map);
-
-/* representing HT and core siblings of each logical CPU */
-cpumask_t cpu_core_map[NR_CPUS] __read_mostly;
-EXPORT_SYMBOL(cpu_core_map);
-
-/*
- * Trampoline 80x86 program as an array.
- */
-
-extern unsigned char trampoline_data[];
-extern unsigned char trampoline_end[];
-
-/* State of each CPU */
-DEFINE_PER_CPU(int, cpu_state) = { 0 };
-
-/*
- * Store all idle threads, this can be reused instead of creating
- * a new thread. Also avoids complicated thread destroy functionality
- * for idle threads.
- */
-struct task_struct *idle_thread_array[NR_CPUS] __cpuinitdata ;
-
-#define get_idle_for_cpu(x)     (idle_thread_array[(x)])
-#define set_idle_for_cpu(x,p)   (idle_thread_array[(x)] = (p))
-
-/*
- * Currently trivial. Write the real->protected mode
- * bootstrap into the page concerned. The caller
- * has made sure it's suitably aligned.
- */
-
-static unsigned long __cpuinit setup_trampoline(void)
-{
-	void *tramp = __va(SMP_TRAMPOLINE_BASE); 
-	memcpy(tramp, trampoline_data, trampoline_end - trampoline_data);
-	return virt_to_phys(tramp);
-}
-
-/*
- * The bootstrap kernel entry code has set these up. Save them for
- * a given CPU
- */
-
-static void __cpuinit smp_store_cpu_info(int id)
-{
-	struct cpuinfo_x86 *c = cpu_data + id;
-
-	*c = boot_cpu_data;
-	identify_cpu(c);
-	print_cpu_info(c);
-}
-
-static atomic_t init_deasserted __cpuinitdata;
-
-/*
- * Report back to the Boot Processor.
- * Running on AP.
- */
-void __cpuinit smp_callin(void)
-{
-	int cpuid, phys_id;
-	unsigned long timeout;
-
-	/*
-	 * If waken up by an INIT in an 82489DX configuration
-	 * we may get here before an INIT-deassert IPI reaches
-	 * our local APIC.  We have to wait for the IPI or we'll
-	 * lock up on an APIC access.
-	 */
-	while (!atomic_read(&init_deasserted))
-		cpu_relax();
-
-	/*
-	 * (This works even if the APIC is not enabled.)
-	 */
-	phys_id = GET_APIC_ID(apic_read(APIC_ID));
-	cpuid = smp_processor_id();
-	if (cpu_isset(cpuid, cpu_callin_map)) {
-		panic("smp_callin: phys CPU#%d, CPU#%d already present??\n",
-					phys_id, cpuid);
-	}
-	Dprintk("CPU#%d (phys ID: %d) waiting for CALLOUT\n", cpuid, phys_id);
-
-	/*
-	 * STARTUP IPIs are fragile beasts as they might sometimes
-	 * trigger some glue motherboard logic. Complete APIC bus
-	 * silence for 1 second, this overestimates the time the
-	 * boot CPU is spending to send the up to 2 STARTUP IPIs
-	 * by a factor of two. This should be enough.
-	 */
-
-	/*
-	 * Waiting 2s total for startup (udelay is not yet working)
-	 */
-	timeout = jiffies + 2*HZ;
-	while (time_before(jiffies, timeout)) {
-		/*
-		 * Has the boot CPU finished it's STARTUP sequence?
-		 */
-		if (cpu_isset(cpuid, cpu_callout_map))
-			break;
-		cpu_relax();
-	}
-
-	if (!time_before(jiffies, timeout)) {
-		panic("smp_callin: CPU%d started up but did not get a callout!\n",
-			cpuid);
-	}
-
-	/*
-	 * the boot CPU has finished the init stage and is spinning
-	 * on callin_map until we finish. We are free to set up this
-	 * CPU, first the APIC. (this is probably redundant on most
-	 * boards)
-	 */
-
-	Dprintk("CALLIN, before setup_local_APIC().\n");
-	setup_local_APIC();
-
-	/*
-	 * Get our bogomips.
- 	 *
- 	 * Need to enable IRQs because it can take longer and then
-	 * the NMI watchdog might kill us.
-	 */
-	local_irq_enable();
-	calibrate_delay();
-	local_irq_disable();
-	Dprintk("Stack at about %p\n",&cpuid);
-
-	disable_APIC_timer();
-
-	/*
-	 * Save our processor parameters
-	 */
- 	smp_store_cpu_info(cpuid);
-
-	/*
-	 * Allow the master to continue.
-	 */
-	cpu_set(cpuid, cpu_callin_map);
-}
-
-/* maps the cpu to the sched domain representing multi-core */
-cpumask_t cpu_coregroup_map(int cpu)
-{
-	struct cpuinfo_x86 *c = cpu_data + cpu;
-	/*
-	 * For perf, we return last level cache shared map.
-	 * And for power savings, we return cpu_core_map
-	 */
-	if (sched_mc_power_savings || sched_smt_power_savings)
-		return cpu_core_map[cpu];
-	else
-		return c->llc_shared_map;
-}
-
-/* representing cpus for which sibling maps can be computed */
-static cpumask_t cpu_sibling_setup_map;
-
-static inline void set_cpu_sibling_map(int cpu)
-{
-	int i;
-	struct cpuinfo_x86 *c = cpu_data;
-
-	cpu_set(cpu, cpu_sibling_setup_map);
-
-	if (smp_num_siblings > 1) {
-		for_each_cpu_mask(i, cpu_sibling_setup_map) {
-			if (c[cpu].phys_proc_id == c[i].phys_proc_id &&
-			    c[cpu].cpu_core_id == c[i].cpu_core_id) {
-				cpu_set(i, cpu_sibling_map[cpu]);
-				cpu_set(cpu, cpu_sibling_map[i]);
-				cpu_set(i, cpu_core_map[cpu]);
-				cpu_set(cpu, cpu_core_map[i]);
-				cpu_set(i, c[cpu].llc_shared_map);
-				cpu_set(cpu, c[i].llc_shared_map);
-			}
-		}
-	} else {
-		cpu_set(cpu, cpu_sibling_map[cpu]);
-	}
-
-	cpu_set(cpu, c[cpu].llc_shared_map);
-
-	if (current_cpu_data.x86_max_cores == 1) {
-		cpu_core_map[cpu] = cpu_sibling_map[cpu];
-		c[cpu].booted_cores = 1;
-		return;
-	}
-
-	for_each_cpu_mask(i, cpu_sibling_setup_map) {
-		if (cpu_llc_id[cpu] != BAD_APICID &&
-		    cpu_llc_id[cpu] == cpu_llc_id[i]) {
-			cpu_set(i, c[cpu].llc_shared_map);
-			cpu_set(cpu, c[i].llc_shared_map);
-		}
-		if (c[cpu].phys_proc_id == c[i].phys_proc_id) {
-			cpu_set(i, cpu_core_map[cpu]);
-			cpu_set(cpu, cpu_core_map[i]);
-			/*
-			 *  Does this new cpu bringup a new core?
-			 */
-			if (cpus_weight(cpu_sibling_map[cpu]) == 1) {
-				/*
-				 * for each core in package, increment
-				 * the booted_cores for this new cpu
-				 */
-				if (first_cpu(cpu_sibling_map[i]) == i)
-					c[cpu].booted_cores++;
-				/*
-				 * increment the core count for all
-				 * the other cpus in this package
-				 */
-				if (i != cpu)
-					c[i].booted_cores++;
-			} else if (i != cpu && !c[cpu].booted_cores)
-				c[cpu].booted_cores = c[i].booted_cores;
-		}
-	}
-}
-
-/*
- * Setup code on secondary processor (after comming out of the trampoline)
- */
-void __cpuinit start_secondary(void)
-{
-	/*
-	 * Dont put anything before smp_callin(), SMP
-	 * booting is too fragile that we want to limit the
-	 * things done here to the most necessary things.
-	 */
-	cpu_init();
-	preempt_disable();
-	smp_callin();
-
-	/* otherwise gcc will move up the smp_processor_id before the cpu_init */
-	barrier();
-
-	/*
-  	 * Check TSC sync first:
- 	 */
-	check_tsc_sync_target();
-
-	Dprintk("cpu %d: setting up apic clock\n", smp_processor_id()); 	
-	setup_secondary_APIC_clock();
-
-	Dprintk("cpu %d: enabling apic timer\n", smp_processor_id());
-
-	if (nmi_watchdog == NMI_IO_APIC) {
-		disable_8259A_irq(0);
-		enable_NMI_through_LVT0(NULL);
-		enable_8259A_irq(0);
-	}
-
-	enable_APIC_timer();
-
-	/*
-	 * The sibling maps must be set before turing the online map on for
-	 * this cpu
-	 */
-	set_cpu_sibling_map(smp_processor_id());
-
-	/*
-	 * We need to hold call_lock, so there is no inconsistency
-	 * between the time smp_call_function() determines number of
-	 * IPI receipients, and the time when the determination is made
-	 * for which cpus receive the IPI in genapic_flat.c. Holding this
-	 * lock helps us to not include this cpu in a currently in progress
-	 * smp_call_function().
-	 */
-	lock_ipi_call_lock();
-	spin_lock(&vector_lock);
-
-	/* Setup the per cpu irq handling data structures */
-	__setup_vector_irq(smp_processor_id());
-	/*
-	 * Allow the master to continue.
-	 */
-	cpu_set(smp_processor_id(), cpu_online_map);
-	per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE;
-	spin_unlock(&vector_lock);
-
-	unlock_ipi_call_lock();
-
-	cpu_idle();
-}
-
-extern volatile unsigned long init_rsp;
-extern void (*initial_code)(void);
-
-#ifdef APIC_DEBUG
-static void inquire_remote_apic(int apicid)
-{
-	unsigned i, regs[] = { APIC_ID >> 4, APIC_LVR >> 4, APIC_SPIV >> 4 };
-	char *names[] = { "ID", "VERSION", "SPIV" };
-	int timeout;
-	unsigned int status;
-
-	printk(KERN_INFO "Inquiring remote APIC #%d...\n", apicid);
-
-	for (i = 0; i < sizeof(regs) / sizeof(*regs); i++) {
-		printk("... APIC #%d %s: ", apicid, names[i]);
-
-		/*
-		 * Wait for idle.
-		 */
-		status = safe_apic_wait_icr_idle();
-		if (status)
-			printk("a previous APIC delivery may have failed\n");
-
-		apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(apicid));
-		apic_write(APIC_ICR, APIC_DM_REMRD | regs[i]);
-
-		timeout = 0;
-		do {
-			udelay(100);
-			status = apic_read(APIC_ICR) & APIC_ICR_RR_MASK;
-		} while (status == APIC_ICR_RR_INPROG && timeout++ < 1000);
-
-		switch (status) {
-		case APIC_ICR_RR_VALID:
-			status = apic_read(APIC_RRR);
-			printk("%08x\n", status);
-			break;
-		default:
-			printk("failed\n");
-		}
-	}
-}
-#endif
-
-/*
- * Kick the secondary to wake up.
- */
-static int __cpuinit wakeup_secondary_via_INIT(int phys_apicid, unsigned int start_rip)
-{
-	unsigned long send_status, accept_status = 0;
-	int maxlvt, num_starts, j;
-
-	Dprintk("Asserting INIT.\n");
-
-	/*
-	 * Turn INIT on target chip
-	 */
-	apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
-
-	/*
-	 * Send IPI
-	 */
-	apic_write(APIC_ICR, APIC_INT_LEVELTRIG | APIC_INT_ASSERT
-				| APIC_DM_INIT);
-
-	Dprintk("Waiting for send to finish...\n");
-	send_status = safe_apic_wait_icr_idle();
-
-	mdelay(10);
-
-	Dprintk("Deasserting INIT.\n");
-
-	/* Target chip */
-	apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
-
-	/* Send IPI */
-	apic_write(APIC_ICR, APIC_INT_LEVELTRIG | APIC_DM_INIT);
-
-	Dprintk("Waiting for send to finish...\n");
-	send_status = safe_apic_wait_icr_idle();
-
-	mb();
-	atomic_set(&init_deasserted, 1);
-
-	num_starts = 2;
-
-	/*
-	 * Run STARTUP IPI loop.
-	 */
-	Dprintk("#startup loops: %d.\n", num_starts);
-
-	maxlvt = get_maxlvt();
-
-	for (j = 1; j <= num_starts; j++) {
-		Dprintk("Sending STARTUP #%d.\n",j);
-		apic_write(APIC_ESR, 0);
-		apic_read(APIC_ESR);
-		Dprintk("After apic_write.\n");
-
-		/*
-		 * STARTUP IPI
-		 */
-
-		/* Target chip */
-		apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
-
-		/* Boot on the stack */
-		/* Kick the second */
-		apic_write(APIC_ICR, APIC_DM_STARTUP | (start_rip >> 12));
-
-		/*
-		 * Give the other CPU some time to accept the IPI.
-		 */
-		udelay(300);
-
-		Dprintk("Startup point 1.\n");
-
-		Dprintk("Waiting for send to finish...\n");
-		send_status = safe_apic_wait_icr_idle();
-
-		/*
-		 * Give the other CPU some time to accept the IPI.
-		 */
-		udelay(200);
-		/*
-		 * Due to the Pentium erratum 3AP.
-		 */
-		if (maxlvt > 3) {
-			apic_write(APIC_ESR, 0);
-		}
-		accept_status = (apic_read(APIC_ESR) & 0xEF);
-		if (send_status || accept_status)
-			break;
-	}
-	Dprintk("After Startup.\n");
-
-	if (send_status)
-		printk(KERN_ERR "APIC never delivered???\n");
-	if (accept_status)
-		printk(KERN_ERR "APIC delivery error (%lx).\n", accept_status);
-
-	return (send_status | accept_status);
-}
-
-struct create_idle {
-	struct work_struct work;
-	struct task_struct *idle;
-	struct completion done;
-	int cpu;
-};
-
-void do_fork_idle(struct work_struct *work)
-{
-	struct create_idle *c_idle =
-		container_of(work, struct create_idle, work);
-
-	c_idle->idle = fork_idle(c_idle->cpu);
-	complete(&c_idle->done);
-}
-
-/*
- * Boot one CPU.
- */
-static int __cpuinit do_boot_cpu(int cpu, int apicid)
-{
-	unsigned long boot_error;
-	int timeout;
-	unsigned long start_rip;
-	struct create_idle c_idle = {
-		.work = __WORK_INITIALIZER(c_idle.work, do_fork_idle),
-		.cpu = cpu,
-		.done = COMPLETION_INITIALIZER_ONSTACK(c_idle.done),
-	};
-
-	/* allocate memory for gdts of secondary cpus. Hotplug is considered */
-	if (!cpu_gdt_descr[cpu].address &&
-		!(cpu_gdt_descr[cpu].address = get_zeroed_page(GFP_KERNEL))) {
-		printk(KERN_ERR "Failed to allocate GDT for CPU %d\n", cpu);
-		return -1;
-	}
-
-	/* Allocate node local memory for AP pdas */
-	if (cpu_pda(cpu) == &boot_cpu_pda[cpu]) {
-		struct x8664_pda *newpda, *pda;
-		int node = cpu_to_node(cpu);
-		pda = cpu_pda(cpu);
-		newpda = kmalloc_node(sizeof (struct x8664_pda), GFP_ATOMIC,
-				      node);
-		if (newpda) {
-			memcpy(newpda, pda, sizeof (struct x8664_pda));
-			cpu_pda(cpu) = newpda;
-		} else
-			printk(KERN_ERR
-		"Could not allocate node local PDA for CPU %d on node %d\n",
-				cpu, node);
-	}
-
-	alternatives_smp_switch(1);
-
-	c_idle.idle = get_idle_for_cpu(cpu);
-
-	if (c_idle.idle) {
-		c_idle.idle->thread.rsp = (unsigned long) (((struct pt_regs *)
-			(THREAD_SIZE +  task_stack_page(c_idle.idle))) - 1);
-		init_idle(c_idle.idle, cpu);
-		goto do_rest;
-	}
-
-	/*
-	 * During cold boot process, keventd thread is not spun up yet.
-	 * When we do cpu hot-add, we create idle threads on the fly, we should
-	 * not acquire any attributes from the calling context. Hence the clean
-	 * way to create kernel_threads() is to do that from keventd().
-	 * We do the current_is_keventd() due to the fact that ACPI notifier
-	 * was also queuing to keventd() and when the caller is already running
-	 * in context of keventd(), we would end up with locking up the keventd
-	 * thread.
-	 */
-	if (!keventd_up() || current_is_keventd())
-		c_idle.work.func(&c_idle.work);
-	else {
-		schedule_work(&c_idle.work);
-		wait_for_completion(&c_idle.done);
-	}
-
-	if (IS_ERR(c_idle.idle)) {
-		printk("failed fork for CPU %d\n", cpu);
-		return PTR_ERR(c_idle.idle);
-	}
-
-	set_idle_for_cpu(cpu, c_idle.idle);
-
-do_rest:
-
-	cpu_pda(cpu)->pcurrent = c_idle.idle;
-
-	start_rip = setup_trampoline();
-
-	init_rsp = c_idle.idle->thread.rsp;
-	per_cpu(init_tss,cpu).rsp0 = init_rsp;
-	initial_code = start_secondary;
-	clear_tsk_thread_flag(c_idle.idle, TIF_FORK);
-
-	printk(KERN_INFO "Booting processor %d/%d APIC 0x%x\n", cpu,
-		cpus_weight(cpu_present_map),
-		apicid);
-
-	/*
-	 * This grunge runs the startup process for
-	 * the targeted processor.
-	 */
-
-	atomic_set(&init_deasserted, 0);
-
-	Dprintk("Setting warm reset code and vector.\n");
-
-	CMOS_WRITE(0xa, 0xf);
-	local_flush_tlb();
-	Dprintk("1.\n");
-	*((volatile unsigned short *) phys_to_virt(0x469)) = start_rip >> 4;
-	Dprintk("2.\n");
-	*((volatile unsigned short *) phys_to_virt(0x467)) = start_rip & 0xf;
-	Dprintk("3.\n");
-
-	/*
-	 * Be paranoid about clearing APIC errors.
-	 */
-	apic_write(APIC_ESR, 0);
-	apic_read(APIC_ESR);
-
-	/*
-	 * Status is now clean
-	 */
-	boot_error = 0;
-
-	/*
-	 * Starting actual IPI sequence...
-	 */
-	boot_error = wakeup_secondary_via_INIT(apicid, start_rip);
-
-	if (!boot_error) {
-		/*
-		 * allow APs to start initializing.
-		 */
-		Dprintk("Before Callout %d.\n", cpu);
-		cpu_set(cpu, cpu_callout_map);
-		Dprintk("After Callout %d.\n", cpu);
-
-		/*
-		 * Wait 5s total for a response
-		 */
-		for (timeout = 0; timeout < 50000; timeout++) {
-			if (cpu_isset(cpu, cpu_callin_map))
-				break;	/* It has booted */
-			udelay(100);
-		}
-
-		if (cpu_isset(cpu, cpu_callin_map)) {
-			/* number CPUs logically, starting from 1 (BSP is 0) */
-			Dprintk("CPU has booted.\n");
-		} else {
-			boot_error = 1;
-			if (*((volatile unsigned char *)phys_to_virt(SMP_TRAMPOLINE_BASE))
-					== 0xA5)
-				/* trampoline started but...? */
-				printk("Stuck ??\n");
-			else
-				/* trampoline code not run */
-				printk("Not responding.\n");
-#ifdef APIC_DEBUG
-			inquire_remote_apic(apicid);
-#endif
-		}
-	}
-	if (boot_error) {
-		cpu_clear(cpu, cpu_callout_map); /* was set here (do_boot_cpu()) */
-		clear_bit(cpu, &cpu_initialized); /* was set by cpu_init() */
-		clear_node_cpumask(cpu); /* was set by numa_add_cpu */
-		cpu_clear(cpu, cpu_present_map);
-		cpu_clear(cpu, cpu_possible_map);
-		x86_cpu_to_apicid[cpu] = BAD_APICID;
-		x86_cpu_to_log_apicid[cpu] = BAD_APICID;
-		return -EIO;
-	}
-
-	return 0;
-}
-
-cycles_t cacheflush_time;
-unsigned long cache_decay_ticks;
-
-/*
- * Cleanup possible dangling ends...
- */
-static __cpuinit void smp_cleanup_boot(void)
-{
-	/*
-	 * Paranoid:  Set warm reset code and vector here back
-	 * to default values.
-	 */
-	CMOS_WRITE(0, 0xf);
-
-	/*
-	 * Reset trampoline flag
-	 */
-	*((volatile int *) phys_to_virt(0x467)) = 0;
-}
-
-/*
- * Fall back to non SMP mode after errors.
- *
- * RED-PEN audit/test this more. I bet there is more state messed up here.
- */
-static __init void disable_smp(void)
-{
-	cpu_present_map = cpumask_of_cpu(0);
-	cpu_possible_map = cpumask_of_cpu(0);
-	if (smp_found_config)
-		phys_cpu_present_map = physid_mask_of_physid(boot_cpu_id);
-	else
-		phys_cpu_present_map = physid_mask_of_physid(0);
-	cpu_set(0, cpu_sibling_map[0]);
-	cpu_set(0, cpu_core_map[0]);
-}
-
-#ifdef CONFIG_HOTPLUG_CPU
-
-int additional_cpus __initdata = -1;
-
-/*
- * cpu_possible_map should be static, it cannot change as cpu's
- * are onlined, or offlined. The reason is per-cpu data-structures
- * are allocated by some modules at init time, and dont expect to
- * do this dynamically on cpu arrival/departure.
- * cpu_present_map on the other hand can change dynamically.
- * In case when cpu_hotplug is not compiled, then we resort to current
- * behaviour, which is cpu_possible == cpu_present.
- * - Ashok Raj
- *
- * Three ways to find out the number of additional hotplug CPUs:
- * - If the BIOS specified disabled CPUs in ACPI/mptables use that.
- * - The user can overwrite it with additional_cpus=NUM
- * - Otherwise don't reserve additional CPUs.
- * We do this because additional CPUs waste a lot of memory.
- * -AK
- */
-__init void prefill_possible_map(void)
-{
-	int i;
-	int possible;
-
- 	if (additional_cpus == -1) {
- 		if (disabled_cpus > 0)
- 			additional_cpus = disabled_cpus;
- 		else
-			additional_cpus = 0;
- 	}
-	possible = num_processors + additional_cpus;
-	if (possible > NR_CPUS) 
-		possible = NR_CPUS;
-
-	printk(KERN_INFO "SMP: Allowing %d CPUs, %d hotplug CPUs\n",
-		possible,
-	        max_t(int, possible - num_processors, 0));
-
-	for (i = 0; i < possible; i++)
-		cpu_set(i, cpu_possible_map);
-}
-#endif
-
-/*
- * Various sanity checks.
- */
-static int __init smp_sanity_check(unsigned max_cpus)
-{
-	if (!physid_isset(hard_smp_processor_id(), phys_cpu_present_map)) {
-		printk("weird, boot CPU (#%d) not listed by the BIOS.\n",
-		       hard_smp_processor_id());
-		physid_set(hard_smp_processor_id(), phys_cpu_present_map);
-	}
-
-	/*
-	 * If we couldn't find an SMP configuration at boot time,
-	 * get out of here now!
-	 */
-	if (!smp_found_config) {
-		printk(KERN_NOTICE "SMP motherboard not detected.\n");
-		disable_smp();
-		if (APIC_init_uniprocessor())
-			printk(KERN_NOTICE "Local APIC not detected."
-					   " Using dummy APIC emulation.\n");
-		return -1;
-	}
-
-	/*
-	 * Should not be necessary because the MP table should list the boot
-	 * CPU too, but we do it for the sake of robustness anyway.
-	 */
-	if (!physid_isset(boot_cpu_id, phys_cpu_present_map)) {
-		printk(KERN_NOTICE "weird, boot CPU (#%d) not listed by the BIOS.\n",
-								 boot_cpu_id);
-		physid_set(hard_smp_processor_id(), phys_cpu_present_map);
-	}
-
-	/*
-	 * If we couldn't find a local APIC, then get out of here now!
-	 */
-	if (!cpu_has_apic) {
-		printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n",
-			boot_cpu_id);
-		printk(KERN_ERR "... forcing use of dummy APIC emulation. (tell your hw vendor)\n");
-		nr_ioapics = 0;
-		return -1;
-	}
-
-	/*
-	 * If SMP should be disabled, then really disable it!
-	 */
-	if (!max_cpus) {
-		printk(KERN_INFO "SMP mode deactivated, forcing use of dummy APIC emulation.\n");
-		nr_ioapics = 0;
-		return -1;
-	}
-
-	return 0;
-}
-
-/*
- * Prepare for SMP bootup.  The MP table or ACPI has been read
- * earlier.  Just do some sanity checking here and enable APIC mode.
- */
-void __init smp_prepare_cpus(unsigned int max_cpus)
-{
-	nmi_watchdog_default();
-	current_cpu_data = boot_cpu_data;
-	current_thread_info()->cpu = 0;  /* needed? */
-	set_cpu_sibling_map(0);
-
-	if (smp_sanity_check(max_cpus) < 0) {
-		printk(KERN_INFO "SMP disabled\n");
-		disable_smp();
-		return;
-	}
-
-
-	/*
-	 * Switch from PIC to APIC mode.
-	 */
-	setup_local_APIC();
-
-	if (GET_APIC_ID(apic_read(APIC_ID)) != boot_cpu_id) {
-		panic("Boot APIC ID in local APIC unexpected (%d vs %d)",
-		      GET_APIC_ID(apic_read(APIC_ID)), boot_cpu_id);
-		/* Or can we switch back to PIC here? */
-	}
-
-	/*
-	 * Now start the IO-APICs
-	 */
-	if (!skip_ioapic_setup && nr_ioapics)
-		setup_IO_APIC();
-	else
-		nr_ioapics = 0;
-
-	/*
-	 * Set up local APIC timer on boot CPU.
-	 */
-
-	setup_boot_APIC_clock();
-}
-
-/*
- * Early setup to make printk work.
- */
-void __init smp_prepare_boot_cpu(void)
-{
-	int me = smp_processor_id();
-	cpu_set(me, cpu_online_map);
-	cpu_set(me, cpu_callout_map);
-	per_cpu(cpu_state, me) = CPU_ONLINE;
-}
-
-/*
- * Entry point to boot a CPU.
- */
-int __cpuinit __cpu_up(unsigned int cpu)
-{
-	int apicid = cpu_present_to_apicid(cpu);
-	unsigned long flags;
-	int err;
-
-	WARN_ON(irqs_disabled());
-
-	Dprintk("++++++++++++++++++++=_---CPU UP  %u\n", cpu);
-
-	if (apicid == BAD_APICID || apicid == boot_cpu_id ||
-	    !physid_isset(apicid, phys_cpu_present_map)) {
-		printk("__cpu_up: bad cpu %d\n", cpu);
-		return -EINVAL;
-	}
-
-	/*
-	 * Already booted CPU?
-	 */
- 	if (cpu_isset(cpu, cpu_callin_map)) {
-		Dprintk("do_boot_cpu %d Already started\n", cpu);
- 		return -ENOSYS;
-	}
-
-	/*
-	 * Save current MTRR state in case it was changed since early boot
-	 * (e.g. by the ACPI SMI) to initialize new CPUs with MTRRs in sync:
-	 */
-	mtrr_save_state();
-
-	per_cpu(cpu_state, cpu) = CPU_UP_PREPARE;
-	/* Boot it! */
-	err = do_boot_cpu(cpu, apicid);
-	if (err < 0) {
-		Dprintk("do_boot_cpu failed %d\n", err);
-		return err;
-	}
-
-	/* Unleash the CPU! */
-	Dprintk("waiting for cpu %d\n", cpu);
-
-	/*
-  	 * Make sure and check TSC sync:
- 	 */
-	local_irq_save(flags);
-	check_tsc_sync_source(cpu);
-	local_irq_restore(flags);
-
-	while (!cpu_isset(cpu, cpu_online_map))
-		cpu_relax();
-	err = 0;
-
-	return err;
-}
-
-/*
- * Finish the SMP boot.
- */
-void __init smp_cpus_done(unsigned int max_cpus)
-{
-	smp_cleanup_boot();
-	setup_ioapic_dest();
-	check_nmi_watchdog();
-}
-
-#ifdef CONFIG_HOTPLUG_CPU
-
-static void remove_siblinginfo(int cpu)
-{
-	int sibling;
-	struct cpuinfo_x86 *c = cpu_data;
-
-	for_each_cpu_mask(sibling, cpu_core_map[cpu]) {
-		cpu_clear(cpu, cpu_core_map[sibling]);
-		/*
-		 * last thread sibling in this cpu core going down
-		 */
-		if (cpus_weight(cpu_sibling_map[cpu]) == 1)
-			c[sibling].booted_cores--;
-	}
-			
-	for_each_cpu_mask(sibling, cpu_sibling_map[cpu])
-		cpu_clear(cpu, cpu_sibling_map[sibling]);
-	cpus_clear(cpu_sibling_map[cpu]);
-	cpus_clear(cpu_core_map[cpu]);
-	c[cpu].phys_proc_id = 0;
-	c[cpu].cpu_core_id = 0;
-	cpu_clear(cpu, cpu_sibling_setup_map);
-}
-
-void remove_cpu_from_maps(void)
-{
-	int cpu = smp_processor_id();
-
-	cpu_clear(cpu, cpu_callout_map);
-	cpu_clear(cpu, cpu_callin_map);
-	clear_bit(cpu, &cpu_initialized); /* was set by cpu_init() */
-	clear_node_cpumask(cpu);
-}
-
-int __cpu_disable(void)
-{
-	int cpu = smp_processor_id();
-
-	/*
-	 * Perhaps use cpufreq to drop frequency, but that could go
-	 * into generic code.
- 	 *
-	 * We won't take down the boot processor on i386 due to some
-	 * interrupts only being able to be serviced by the BSP.
-	 * Especially so if we're not using an IOAPIC	-zwane
-	 */
-	if (cpu == 0)
-		return -EBUSY;
-
-	if (nmi_watchdog == NMI_LOCAL_APIC)
-		stop_apic_nmi_watchdog(NULL);
-	clear_local_APIC();
-
-	/*
-	 * HACK:
-	 * Allow any queued timer interrupts to get serviced
-	 * This is only a temporary solution until we cleanup
-	 * fixup_irqs as we do for IA64.
-	 */
-	local_irq_enable();
-	mdelay(1);
-
-	local_irq_disable();
-	remove_siblinginfo(cpu);
-
-	spin_lock(&vector_lock);
-	/* It's now safe to remove this processor from the online map */
-	cpu_clear(cpu, cpu_online_map);
-	spin_unlock(&vector_lock);
-	remove_cpu_from_maps();
-	fixup_irqs(cpu_online_map);
-	return 0;
-}
-
-void __cpu_die(unsigned int cpu)
-{
-	/* We don't do anything here: idle task is faking death itself. */
-	unsigned int i;
-
-	for (i = 0; i < 10; i++) {
-		/* They ack this in play_dead by setting CPU_DEAD */
-		if (per_cpu(cpu_state, cpu) == CPU_DEAD) {
-			printk ("CPU %d is now offline\n", cpu);
-			if (1 == num_online_cpus())
-				alternatives_smp_switch(0);
-			return;
-		}
-		msleep(100);
-	}
- 	printk(KERN_ERR "CPU %u didn't die...\n", cpu);
-}
-
-static __init int setup_additional_cpus(char *s)
-{
-	return s && get_option(&s, &additional_cpus) ? 0 : -EINVAL;
-}
-early_param("additional_cpus", setup_additional_cpus);
-
-#else /* ... !CONFIG_HOTPLUG_CPU */
-
-int __cpu_disable(void)
-{
-	return -ENOSYS;
-}
-
-void __cpu_die(unsigned int cpu)
-{
-	/* We said "no" in __cpu_disable */
-	BUG();
-}
-#endif /* CONFIG_HOTPLUG_CPU */
diff --git a/arch/x86_64/kernel/stacktrace.c b/arch/x86_64/kernel/stacktrace.c
deleted file mode 100644
index cb91091..0000000
--- a/arch/x86_64/kernel/stacktrace.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * arch/x86_64/kernel/stacktrace.c
- *
- * Stack trace management functions
- *
- *  Copyright (C) 2006 Red Hat, Inc., Ingo Molnar <mingo@redhat.com>
- */
-#include <linux/sched.h>
-#include <linux/stacktrace.h>
-#include <linux/module.h>
-#include <asm/stacktrace.h>
-
-static void save_stack_warning(void *data, char *msg)
-{
-}
-
-static void
-save_stack_warning_symbol(void *data, char *msg, unsigned long symbol)
-{
-}
-
-static int save_stack_stack(void *data, char *name)
-{
-	return -1;
-}
-
-static void save_stack_address(void *data, unsigned long addr)
-{
-	struct stack_trace *trace = (struct stack_trace *)data;
-	if (trace->skip > 0) {
-		trace->skip--;
-		return;
-	}
-	if (trace->nr_entries < trace->max_entries)
-		trace->entries[trace->nr_entries++] = addr;
-}
-
-static struct stacktrace_ops save_stack_ops = {
-	.warning = save_stack_warning,
-	.warning_symbol = save_stack_warning_symbol,
-	.stack = save_stack_stack,
-	.address = save_stack_address,
-};
-
-/*
- * Save stack-backtrace addresses into a stack_trace buffer.
- */
-void save_stack_trace(struct stack_trace *trace)
-{
-	dump_trace(current, NULL, NULL, &save_stack_ops, trace);
-	if (trace->nr_entries < trace->max_entries)
-		trace->entries[trace->nr_entries++] = ULONG_MAX;
-}
-EXPORT_SYMBOL(save_stack_trace);
diff --git a/arch/x86_64/kernel/suspend_64.c b/arch/x86_64/kernel/suspend_64.c
deleted file mode 100644
index 573c0a6..0000000
--- a/arch/x86_64/kernel/suspend_64.c
+++ /dev/null
@@ -1,239 +0,0 @@
-/*
- * Suspend support specific for i386.
- *
- * Distribute under GPLv2
- *
- * Copyright (c) 2002 Pavel Machek <pavel@suse.cz>
- * Copyright (c) 2001 Patrick Mochel <mochel@osdl.org>
- */
-
-#include <linux/smp.h>
-#include <linux/suspend.h>
-#include <asm/proto.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/mtrr.h>
-
-/* References to section boundaries */
-extern const void __nosave_begin, __nosave_end;
-
-struct saved_context saved_context;
-
-unsigned long saved_context_eax, saved_context_ebx, saved_context_ecx, saved_context_edx;
-unsigned long saved_context_esp, saved_context_ebp, saved_context_esi, saved_context_edi;
-unsigned long saved_context_r08, saved_context_r09, saved_context_r10, saved_context_r11;
-unsigned long saved_context_r12, saved_context_r13, saved_context_r14, saved_context_r15;
-unsigned long saved_context_eflags;
-
-void __save_processor_state(struct saved_context *ctxt)
-{
-	kernel_fpu_begin();
-
-	/*
-	 * descriptor tables
-	 */
-	asm volatile ("sgdt %0" : "=m" (ctxt->gdt_limit));
-	asm volatile ("sidt %0" : "=m" (ctxt->idt_limit));
-	asm volatile ("str %0"  : "=m" (ctxt->tr));
-
-	/* XMM0..XMM15 should be handled by kernel_fpu_begin(). */
-	/*
-	 * segment registers
-	 */
-	asm volatile ("movw %%ds, %0" : "=m" (ctxt->ds));
-	asm volatile ("movw %%es, %0" : "=m" (ctxt->es));
-	asm volatile ("movw %%fs, %0" : "=m" (ctxt->fs));
-	asm volatile ("movw %%gs, %0" : "=m" (ctxt->gs));
-	asm volatile ("movw %%ss, %0" : "=m" (ctxt->ss));
-
-	rdmsrl(MSR_FS_BASE, ctxt->fs_base);
-	rdmsrl(MSR_GS_BASE, ctxt->gs_base);
-	rdmsrl(MSR_KERNEL_GS_BASE, ctxt->gs_kernel_base);
-	mtrr_save_fixed_ranges(NULL);
-
-	/*
-	 * control registers 
-	 */
-	rdmsrl(MSR_EFER, ctxt->efer);
-	ctxt->cr0 = read_cr0();
-	ctxt->cr2 = read_cr2();
-	ctxt->cr3 = read_cr3();
-	ctxt->cr4 = read_cr4();
-	ctxt->cr8 = read_cr8();
-}
-
-void save_processor_state(void)
-{
-	__save_processor_state(&saved_context);
-}
-
-static void do_fpu_end(void)
-{
-	/*
-	 * Restore FPU regs if necessary
-	 */
-	kernel_fpu_end();
-}
-
-void __restore_processor_state(struct saved_context *ctxt)
-{
-	/*
-	 * control registers
-	 */
-	wrmsrl(MSR_EFER, ctxt->efer);
-	write_cr8(ctxt->cr8);
-	write_cr4(ctxt->cr4);
-	write_cr3(ctxt->cr3);
-	write_cr2(ctxt->cr2);
-	write_cr0(ctxt->cr0);
-
-	/*
-	 * now restore the descriptor tables to their proper values
-	 * ltr is done i fix_processor_context().
-	 */
-	asm volatile ("lgdt %0" :: "m" (ctxt->gdt_limit));
-	asm volatile ("lidt %0" :: "m" (ctxt->idt_limit));
-
-	/*
-	 * segment registers
-	 */
-	asm volatile ("movw %0, %%ds" :: "r" (ctxt->ds));
-	asm volatile ("movw %0, %%es" :: "r" (ctxt->es));
-	asm volatile ("movw %0, %%fs" :: "r" (ctxt->fs));
-	load_gs_index(ctxt->gs);
-	asm volatile ("movw %0, %%ss" :: "r" (ctxt->ss));
-
-	wrmsrl(MSR_FS_BASE, ctxt->fs_base);
-	wrmsrl(MSR_GS_BASE, ctxt->gs_base);
-	wrmsrl(MSR_KERNEL_GS_BASE, ctxt->gs_kernel_base);
-
-	fix_processor_context();
-
-	do_fpu_end();
-	mtrr_ap_init();
-}
-
-void restore_processor_state(void)
-{
-	__restore_processor_state(&saved_context);
-}
-
-void fix_processor_context(void)
-{
-	int cpu = smp_processor_id();
-	struct tss_struct *t = &per_cpu(init_tss, cpu);
-
-	set_tss_desc(cpu,t);	/* This just modifies memory; should not be neccessary. But... This is neccessary, because 386 hardware has concept of busy TSS or some similar stupidity. */
-
-	cpu_gdt(cpu)[GDT_ENTRY_TSS].type = 9;
-
-	syscall_init();                         /* This sets MSR_*STAR and related */
-	load_TR_desc();				/* This does ltr */
-	load_LDT(&current->active_mm->context);	/* This does lldt */
-
-	/*
-	 * Now maybe reload the debug registers
-	 */
-	if (current->thread.debugreg7){
-                loaddebug(&current->thread, 0);
-                loaddebug(&current->thread, 1);
-                loaddebug(&current->thread, 2);
-                loaddebug(&current->thread, 3);
-                /* no 4 and 5 */
-                loaddebug(&current->thread, 6);
-                loaddebug(&current->thread, 7);
-	}
-
-}
-
-#ifdef CONFIG_HIBERNATION
-/* Defined in arch/x86_64/kernel/suspend_asm.S */
-extern int restore_image(void);
-
-pgd_t *temp_level4_pgt;
-
-static int res_phys_pud_init(pud_t *pud, unsigned long address, unsigned long end)
-{
-	long i, j;
-
-	i = pud_index(address);
-	pud = pud + i;
-	for (; i < PTRS_PER_PUD; pud++, i++) {
-		unsigned long paddr;
-		pmd_t *pmd;
-
-		paddr = address + i*PUD_SIZE;
-		if (paddr >= end)
-			break;
-
-		pmd = (pmd_t *)get_safe_page(GFP_ATOMIC);
-		if (!pmd)
-			return -ENOMEM;
-		set_pud(pud, __pud(__pa(pmd) | _KERNPG_TABLE));
-		for (j = 0; j < PTRS_PER_PMD; pmd++, j++, paddr += PMD_SIZE) {
-			unsigned long pe;
-
-			if (paddr >= end)
-				break;
-			pe = _PAGE_NX | _PAGE_PSE | _KERNPG_TABLE | paddr;
-			pe &= __supported_pte_mask;
-			set_pmd(pmd, __pmd(pe));
-		}
-	}
-	return 0;
-}
-
-static int set_up_temporary_mappings(void)
-{
-	unsigned long start, end, next;
-	int error;
-
-	temp_level4_pgt = (pgd_t *)get_safe_page(GFP_ATOMIC);
-	if (!temp_level4_pgt)
-		return -ENOMEM;
-
-	/* It is safe to reuse the original kernel mapping */
-	set_pgd(temp_level4_pgt + pgd_index(__START_KERNEL_map),
-		init_level4_pgt[pgd_index(__START_KERNEL_map)]);
-
-	/* Set up the direct mapping from scratch */
-	start = (unsigned long)pfn_to_kaddr(0);
-	end = (unsigned long)pfn_to_kaddr(end_pfn);
-
-	for (; start < end; start = next) {
-		pud_t *pud = (pud_t *)get_safe_page(GFP_ATOMIC);
-		if (!pud)
-			return -ENOMEM;
-		next = start + PGDIR_SIZE;
-		if (next > end)
-			next = end;
-		if ((error = res_phys_pud_init(pud, __pa(start), __pa(next))))
-			return error;
-		set_pgd(temp_level4_pgt + pgd_index(start),
-			mk_kernel_pgd(__pa(pud)));
-	}
-	return 0;
-}
-
-int swsusp_arch_resume(void)
-{
-	int error;
-
-	/* We have got enough memory and from now on we cannot recover */
-	if ((error = set_up_temporary_mappings()))
-		return error;
-	restore_image();
-	return 0;
-}
-
-/*
- *	pfn_is_nosave - check if given pfn is in the 'nosave' section
- */
-
-int pfn_is_nosave(unsigned long pfn)
-{
-	unsigned long nosave_begin_pfn = __pa_symbol(&__nosave_begin) >> PAGE_SHIFT;
-	unsigned long nosave_end_pfn = PAGE_ALIGN(__pa_symbol(&__nosave_end)) >> PAGE_SHIFT;
-	return (pfn >= nosave_begin_pfn) && (pfn < nosave_end_pfn);
-}
-#endif /* CONFIG_HIBERNATION */
diff --git a/arch/x86_64/kernel/suspend_asm_64.S b/arch/x86_64/kernel/suspend_asm_64.S
deleted file mode 100644
index 16d183f..0000000
--- a/arch/x86_64/kernel/suspend_asm_64.S
+++ /dev/null
@@ -1,110 +0,0 @@
-/* Copyright 2004,2005 Pavel Machek <pavel@suse.cz>, Andi Kleen <ak@suse.de>, Rafael J. Wysocki <rjw@sisk.pl>
- *
- * Distribute under GPLv2.
- *
- * swsusp_arch_resume may not use any stack, nor any variable that is
- * not "NoSave" during copying pages:
- *
- * Its rewriting one kernel image with another. What is stack in "old"
- * image could very well be data page in "new" image, and overwriting
- * your own stack under you is bad idea.
- */
-	
-	.text
-#include <linux/linkage.h>
-#include <asm/segment.h>
-#include <asm/page.h>
-#include <asm/asm-offsets.h>
-
-ENTRY(swsusp_arch_suspend)
-
-	movq %rsp, saved_context_esp(%rip)
-	movq %rax, saved_context_eax(%rip)
-	movq %rbx, saved_context_ebx(%rip)
-	movq %rcx, saved_context_ecx(%rip)
-	movq %rdx, saved_context_edx(%rip)
-	movq %rbp, saved_context_ebp(%rip)
-	movq %rsi, saved_context_esi(%rip)
-	movq %rdi, saved_context_edi(%rip)
-	movq %r8,  saved_context_r08(%rip)
-	movq %r9,  saved_context_r09(%rip)
-	movq %r10, saved_context_r10(%rip)
-	movq %r11, saved_context_r11(%rip)
-	movq %r12, saved_context_r12(%rip)
-	movq %r13, saved_context_r13(%rip)
-	movq %r14, saved_context_r14(%rip)
-	movq %r15, saved_context_r15(%rip)
-	pushfq ; popq saved_context_eflags(%rip)
-
-	call swsusp_save
-	ret
-
-ENTRY(restore_image)
-	/* switch to temporary page tables */
-	movq	$__PAGE_OFFSET, %rdx
-	movq	temp_level4_pgt(%rip), %rax
-	subq	%rdx, %rax
-	movq	%rax, %cr3
-	/* Flush TLB */
-	movq	mmu_cr4_features(%rip), %rax
-	movq	%rax, %rdx
-	andq	$~(1<<7), %rdx	# PGE
-	movq	%rdx, %cr4;  # turn off PGE
-	movq	%cr3, %rcx;  # flush TLB
-	movq	%rcx, %cr3;
-	movq	%rax, %cr4;  # turn PGE back on
-
-	movq	restore_pblist(%rip), %rdx
-loop:
-	testq	%rdx, %rdx
-	jz	done
-
-	/* get addresses from the pbe and copy the page */
-	movq	pbe_address(%rdx), %rsi
-	movq	pbe_orig_address(%rdx), %rdi
-	movq	$512, %rcx
-	rep
-	movsq
-
-	/* progress to the next pbe */
-	movq	pbe_next(%rdx), %rdx
-	jmp	loop
-done:
-	/* go back to the original page tables */
-	movq    $(init_level4_pgt - __START_KERNEL_map), %rax
-	addq    phys_base(%rip), %rax
-	movq    %rax, %cr3
-
-	/* Flush TLB, including "global" things (vmalloc) */
-	movq	mmu_cr4_features(%rip), %rax
-	movq	%rax, %rdx
-	andq	$~(1<<7), %rdx;  # PGE
-	movq	%rdx, %cr4;  # turn off PGE
-	movq	%cr3, %rcx;  # flush TLB
-	movq	%rcx, %cr3
-	movq	%rax, %cr4;  # turn PGE back on
-
-	movl	$24, %eax
-	movl	%eax, %ds
-
-	movq saved_context_esp(%rip), %rsp
-	movq saved_context_ebp(%rip), %rbp
-	/* Don't restore %rax, it must be 0 anyway */
-	movq saved_context_ebx(%rip), %rbx
-	movq saved_context_ecx(%rip), %rcx
-	movq saved_context_edx(%rip), %rdx
-	movq saved_context_esi(%rip), %rsi
-	movq saved_context_edi(%rip), %rdi
-	movq saved_context_r08(%rip), %r8
-	movq saved_context_r09(%rip), %r9
-	movq saved_context_r10(%rip), %r10
-	movq saved_context_r11(%rip), %r11
-	movq saved_context_r12(%rip), %r12
-	movq saved_context_r13(%rip), %r13
-	movq saved_context_r14(%rip), %r14
-	movq saved_context_r15(%rip), %r15
-	pushq saved_context_eflags(%rip) ; popfq
-
-	xorq	%rax, %rax
-
-	ret
diff --git a/arch/x86_64/kernel/sys_x86_64.c b/arch/x86_64/kernel/sys_x86_64.c
deleted file mode 100644
index 4770b7a..0000000
--- a/arch/x86_64/kernel/sys_x86_64.c
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * linux/arch/x86_64/kernel/sys_x86_64.c
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/syscalls.h>
-#include <linux/mm.h>
-#include <linux/fs.h>
-#include <linux/smp.h>
-#include <linux/sem.h>
-#include <linux/msg.h>
-#include <linux/shm.h>
-#include <linux/stat.h>
-#include <linux/mman.h>
-#include <linux/file.h>
-#include <linux/utsname.h>
-#include <linux/personality.h>
-
-#include <asm/uaccess.h>
-#include <asm/ia32.h>
-
-/*
- * sys_pipe() is the normal C calling standard for creating
- * a pipe. It's not the way Unix traditionally does this, though.
- */
-asmlinkage long sys_pipe(int __user *fildes)
-{
-	int fd[2];
-	int error;
-
-	error = do_pipe(fd);
-	if (!error) {
-		if (copy_to_user(fildes, fd, 2*sizeof(int)))
-			error = -EFAULT;
-	}
-	return error;
-}
-
-asmlinkage long sys_mmap(unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags,
-	unsigned long fd, unsigned long off)
-{
-	long error;
-	struct file * file;
-
-	error = -EINVAL;
-	if (off & ~PAGE_MASK)
-		goto out;
-
-	error = -EBADF;
-	file = NULL;
-	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-	if (!(flags & MAP_ANONYMOUS)) {
-		file = fget(fd);
-		if (!file)
-			goto out;
-	}
-	down_write(&current->mm->mmap_sem);
-	error = do_mmap_pgoff(file, addr, len, prot, flags, off >> PAGE_SHIFT);
-	up_write(&current->mm->mmap_sem);
-
-	if (file)
-		fput(file);
-out:
-	return error;
-}
-
-static void find_start_end(unsigned long flags, unsigned long *begin,
-			   unsigned long *end)
-{
-	if (!test_thread_flag(TIF_IA32) && (flags & MAP_32BIT)) {
-		/* This is usually used needed to map code in small
-		   model, so it needs to be in the first 31bit. Limit
-		   it to that.  This means we need to move the
-		   unmapped base down for this case. This can give
-		   conflicts with the heap, but we assume that glibc
-		   malloc knows how to fall back to mmap. Give it 1GB
-		   of playground for now. -AK */ 
-		*begin = 0x40000000; 
-		*end = 0x80000000;		
-	} else {
-		*begin = TASK_UNMAPPED_BASE;
-		*end = TASK_SIZE; 
-	}
-} 
-
-unsigned long
-arch_get_unmapped_area(struct file *filp, unsigned long addr,
-		unsigned long len, unsigned long pgoff, unsigned long flags)
-{
-	struct mm_struct *mm = current->mm;
-	struct vm_area_struct *vma;
-	unsigned long start_addr;
-	unsigned long begin, end;
-	
-	if (flags & MAP_FIXED)
-		return addr;
-
-	find_start_end(flags, &begin, &end); 
-
-	if (len > end)
-		return -ENOMEM;
-
-	if (addr) {
-		addr = PAGE_ALIGN(addr);
-		vma = find_vma(mm, addr);
-		if (end - len >= addr &&
-		    (!vma || addr + len <= vma->vm_start))
-			return addr;
-	}
-	if (((flags & MAP_32BIT) || test_thread_flag(TIF_IA32))
-	    && len <= mm->cached_hole_size) {
-	        mm->cached_hole_size = 0;
-		mm->free_area_cache = begin;
-	}
-	addr = mm->free_area_cache;
-	if (addr < begin) 
-		addr = begin; 
-	start_addr = addr;
-
-full_search:
-	for (vma = find_vma(mm, addr); ; vma = vma->vm_next) {
-		/* At this point:  (!vma || addr < vma->vm_end). */
-		if (end - len < addr) {
-			/*
-			 * Start a new search - just in case we missed
-			 * some holes.
-			 */
-			if (start_addr != begin) {
-				start_addr = addr = begin;
-				mm->cached_hole_size = 0;
-				goto full_search;
-			}
-			return -ENOMEM;
-		}
-		if (!vma || addr + len <= vma->vm_start) {
-			/*
-			 * Remember the place where we stopped the search:
-			 */
-			mm->free_area_cache = addr + len;
-			return addr;
-		}
-		if (addr + mm->cached_hole_size < vma->vm_start)
-		        mm->cached_hole_size = vma->vm_start - addr;
-
-		addr = vma->vm_end;
-	}
-}
-
-asmlinkage long sys_uname(struct new_utsname __user * name)
-{
-	int err;
-	down_read(&uts_sem);
-	err = copy_to_user(name, utsname(), sizeof (*name));
-	up_read(&uts_sem);
-	if (personality(current->personality) == PER_LINUX32) 
-		err |= copy_to_user(&name->machine, "i686", 5); 		
-	return err ? -EFAULT : 0;
-}
diff --git a/arch/x86_64/kernel/syscall_64.c b/arch/x86_64/kernel/syscall_64.c
deleted file mode 100644
index 63d592c..0000000
--- a/arch/x86_64/kernel/syscall_64.c
+++ /dev/null
@@ -1,26 +0,0 @@
-/* System call table for x86-64. */ 
-
-#include <linux/linkage.h>
-#include <linux/sys.h>
-#include <linux/cache.h>
-#include <asm/asm-offsets.h>
-
-#define __NO_STUBS
-
-#define __SYSCALL(nr, sym) extern asmlinkage void sym(void) ; 
-#undef _ASM_X86_64_UNISTD_H_
-#include <asm-x86_64/unistd.h>
-
-#undef __SYSCALL
-#define __SYSCALL(nr, sym) [ nr ] = sym, 
-#undef _ASM_X86_64_UNISTD_H_
-
-typedef void (*sys_call_ptr_t)(void); 
-
-extern void sys_ni_syscall(void);
-
-const sys_call_ptr_t sys_call_table[__NR_syscall_max+1] = {
-	/* Smells like a like a compiler bug -- it doesn't work when the & below is removed. */ 
-	[0 ... __NR_syscall_max] = &sys_ni_syscall,
-#include <asm-x86_64/unistd.h>
-};
diff --git a/arch/x86_64/kernel/tce_64.c b/arch/x86_64/kernel/tce_64.c
deleted file mode 100644
index e3f2569..0000000
--- a/arch/x86_64/kernel/tce_64.c
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
- * This file manages the translation entries for the IBM Calgary IOMMU.
- *
- * Derived from arch/powerpc/platforms/pseries/iommu.c
- *
- * Copyright (C) IBM Corporation, 2006
- *
- * Author: Jon Mason <jdmason@us.ibm.com>
- * Author: Muli Ben-Yehuda <muli@il.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
-#include <linux/spinlock.h>
-#include <linux/string.h>
-#include <linux/pci.h>
-#include <linux/dma-mapping.h>
-#include <linux/bootmem.h>
-#include <asm/tce.h>
-#include <asm/calgary.h>
-#include <asm/proto.h>
-
-/* flush a tce at 'tceaddr' to main memory */
-static inline void flush_tce(void* tceaddr)
-{
-	/* a single tce can't cross a cache line */
-	if (cpu_has_clflush)
-		asm volatile("clflush (%0)" :: "r" (tceaddr));
-	else
-		asm volatile("wbinvd":::"memory");
-}
-
-void tce_build(struct iommu_table *tbl, unsigned long index,
-	unsigned int npages, unsigned long uaddr, int direction)
-{
-	u64* tp;
-	u64 t;
-	u64 rpn;
-
-	t = (1 << TCE_READ_SHIFT);
-	if (direction != DMA_TO_DEVICE)
-		t |= (1 << TCE_WRITE_SHIFT);
-
-	tp = ((u64*)tbl->it_base) + index;
-
-	while (npages--) {
-		rpn = (virt_to_bus((void*)uaddr)) >> PAGE_SHIFT;
-		t &= ~TCE_RPN_MASK;
-		t |= (rpn << TCE_RPN_SHIFT);
-
-		*tp = cpu_to_be64(t);
-		flush_tce(tp);
-
-		uaddr += PAGE_SIZE;
-		tp++;
-	}
-}
-
-void tce_free(struct iommu_table *tbl, long index, unsigned int npages)
-{
-	u64* tp;
-
-	tp  = ((u64*)tbl->it_base) + index;
-
-	while (npages--) {
-		*tp = cpu_to_be64(0);
-		flush_tce(tp);
-		tp++;
-	}
-}
-
-static inline unsigned int table_size_to_number_of_entries(unsigned char size)
-{
-	/*
-	 * size is the order of the table, 0-7
-	 * smallest table is 8K entries, so shift result by 13 to
-	 * multiply by 8K
-	 */
-	return (1 << size) << 13;
-}
-
-static int tce_table_setparms(struct pci_dev *dev, struct iommu_table *tbl)
-{
-	unsigned int bitmapsz;
-	unsigned long bmppages;
-	int ret;
-
-	tbl->it_busno = dev->bus->number;
-
-	/* set the tce table size - measured in entries */
-	tbl->it_size = table_size_to_number_of_entries(specified_table_size);
-
-	/*
-	 * number of bytes needed for the bitmap size in number of
-	 * entries; we need one bit per entry
-	 */
-	bitmapsz = tbl->it_size / BITS_PER_BYTE;
-	bmppages = __get_free_pages(GFP_KERNEL, get_order(bitmapsz));
-	if (!bmppages) {
-		printk(KERN_ERR "Calgary: cannot allocate bitmap\n");
-		ret = -ENOMEM;
-		goto done;
-	}
-
-	tbl->it_map = (unsigned long*)bmppages;
-
-	memset(tbl->it_map, 0, bitmapsz);
-
-	tbl->it_hint = 0;
-
-	spin_lock_init(&tbl->it_lock);
-
-	return 0;
-
-done:
-	return ret;
-}
-
-int __init build_tce_table(struct pci_dev *dev, void __iomem *bbar)
-{
-	struct iommu_table *tbl;
-	int ret;
-
-	if (pci_iommu(dev->bus)) {
-		printk(KERN_ERR "Calgary: dev %p has sysdata->iommu %p\n",
-		       dev, pci_iommu(dev->bus));
-		BUG();
-	}
-
-	tbl = kzalloc(sizeof(struct iommu_table), GFP_KERNEL);
-	if (!tbl) {
-		printk(KERN_ERR "Calgary: error allocating iommu_table\n");
-		ret = -ENOMEM;
-		goto done;
-	}
-
-	ret = tce_table_setparms(dev, tbl);
-	if (ret)
-		goto free_tbl;
-
-	tbl->bbar = bbar;
-
-	set_pci_iommu(dev->bus, tbl);
-
-	return 0;
-
-free_tbl:
-	kfree(tbl);
-done:
-	return ret;
-}
-
-void * __init alloc_tce_table(void)
-{
-	unsigned int size;
-
-	size = table_size_to_number_of_entries(specified_table_size);
-	size *= TCE_ENTRY_SIZE;
-
-	return __alloc_bootmem_low(size, size, 0);
-}
-
-void __init free_tce_table(void *tbl)
-{
-	unsigned int size;
-
-	if (!tbl)
-		return;
-
-	size = table_size_to_number_of_entries(specified_table_size);
-	size *= TCE_ENTRY_SIZE;
-
-	free_bootmem(__pa(tbl), size);
-}
diff --git a/arch/x86_64/kernel/time_64.c b/arch/x86_64/kernel/time_64.c
deleted file mode 100644
index 6d48a4e..0000000
--- a/arch/x86_64/kernel/time_64.c
+++ /dev/null
@@ -1,447 +0,0 @@
-/*
- *  linux/arch/x86-64/kernel/time.c
- *
- *  "High Precision Event Timer" based timekeeping.
- *
- *  Copyright (c) 1991,1992,1995  Linus Torvalds
- *  Copyright (c) 1994  Alan Modra
- *  Copyright (c) 1995  Markus Kuhn
- *  Copyright (c) 1996  Ingo Molnar
- *  Copyright (c) 1998  Andrea Arcangeli
- *  Copyright (c) 2002,2006  Vojtech Pavlik
- *  Copyright (c) 2003  Andi Kleen
- *  RTC support code taken from arch/i386/kernel/timers/time_hpet.c
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/mc146818rtc.h>
-#include <linux/time.h>
-#include <linux/ioport.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/sysdev.h>
-#include <linux/bcd.h>
-#include <linux/notifier.h>
-#include <linux/cpu.h>
-#include <linux/kallsyms.h>
-#include <linux/acpi.h>
-#ifdef CONFIG_ACPI
-#include <acpi/achware.h>	/* for PM timer frequency */
-#include <acpi/acpi_bus.h>
-#endif
-#include <asm/8253pit.h>
-#include <asm/i8253.h>
-#include <asm/pgtable.h>
-#include <asm/vsyscall.h>
-#include <asm/timex.h>
-#include <asm/proto.h>
-#include <asm/hpet.h>
-#include <asm/sections.h>
-#include <linux/hpet.h>
-#include <asm/apic.h>
-#include <asm/hpet.h>
-#include <asm/mpspec.h>
-#include <asm/nmi.h>
-#include <asm/vgtod.h>
-
-static char *timename = NULL;
-
-DEFINE_SPINLOCK(rtc_lock);
-EXPORT_SYMBOL(rtc_lock);
-DEFINE_SPINLOCK(i8253_lock);
-EXPORT_SYMBOL(i8253_lock);
-
-volatile unsigned long __jiffies __section_jiffies = INITIAL_JIFFIES;
-
-unsigned long profile_pc(struct pt_regs *regs)
-{
-	unsigned long pc = instruction_pointer(regs);
-
-	/* Assume the lock function has either no stack frame or a copy
-	   of eflags from PUSHF
-	   Eflags always has bits 22 and up cleared unlike kernel addresses. */
-	if (!user_mode(regs) && in_lock_functions(pc)) {
-		unsigned long *sp = (unsigned long *)regs->rsp;
-		if (sp[0] >> 22)
-			return sp[0];
-		if (sp[1] >> 22)
-			return sp[1];
-	}
-	return pc;
-}
-EXPORT_SYMBOL(profile_pc);
-
-/*
- * In order to set the CMOS clock precisely, set_rtc_mmss has to be called 500
- * ms after the second nowtime has started, because when nowtime is written
- * into the registers of the CMOS clock, it will jump to the next second
- * precisely 500 ms later. Check the Motorola MC146818A or Dallas DS12887 data
- * sheet for details.
- */
-
-static int set_rtc_mmss(unsigned long nowtime)
-{
-	int retval = 0;
-	int real_seconds, real_minutes, cmos_minutes;
-	unsigned char control, freq_select;
-
-/*
- * IRQs are disabled when we're called from the timer interrupt,
- * no need for spin_lock_irqsave()
- */
-
-	spin_lock(&rtc_lock);
-
-/*
- * Tell the clock it's being set and stop it.
- */
-
-	control = CMOS_READ(RTC_CONTROL);
-	CMOS_WRITE(control | RTC_SET, RTC_CONTROL);
-
-	freq_select = CMOS_READ(RTC_FREQ_SELECT);
-	CMOS_WRITE(freq_select | RTC_DIV_RESET2, RTC_FREQ_SELECT);
-
-	cmos_minutes = CMOS_READ(RTC_MINUTES);
-		BCD_TO_BIN(cmos_minutes);
-
-/*
- * since we're only adjusting minutes and seconds, don't interfere with hour
- * overflow. This avoids messing with unknown time zones but requires your RTC
- * not to be off by more than 15 minutes. Since we're calling it only when
- * our clock is externally synchronized using NTP, this shouldn't be a problem.
- */
-
-	real_seconds = nowtime % 60;
-	real_minutes = nowtime / 60;
-	if (((abs(real_minutes - cmos_minutes) + 15) / 30) & 1)
-		real_minutes += 30;		/* correct for half hour time zone */
-	real_minutes %= 60;
-
-	if (abs(real_minutes - cmos_minutes) >= 30) {
-		printk(KERN_WARNING "time.c: can't update CMOS clock "
-		       "from %d to %d\n", cmos_minutes, real_minutes);
-		retval = -1;
-	} else {
-		BIN_TO_BCD(real_seconds);
-		BIN_TO_BCD(real_minutes);
-		CMOS_WRITE(real_seconds, RTC_SECONDS);
-		CMOS_WRITE(real_minutes, RTC_MINUTES);
-	}
-
-/*
- * The following flags have to be released exactly in this order, otherwise the
- * DS12887 (popular MC146818A clone with integrated battery and quartz) will
- * not reset the oscillator and will not update precisely 500 ms later. You
- * won't find this mentioned in the Dallas Semiconductor data sheets, but who
- * believes data sheets anyway ... -- Markus Kuhn
- */
-
-	CMOS_WRITE(control, RTC_CONTROL);
-	CMOS_WRITE(freq_select, RTC_FREQ_SELECT);
-
-	spin_unlock(&rtc_lock);
-
-	return retval;
-}
-
-int update_persistent_clock(struct timespec now)
-{
-	return set_rtc_mmss(now.tv_sec);
-}
-
-void main_timer_handler(void)
-{
-/*
- * Here we are in the timer irq handler. We have irqs locally disabled (so we
- * don't need spin_lock_irqsave()) but we don't know if the timer_bh is running
- * on the other CPU, so we need a lock. We also need to lock the vsyscall
- * variables, because both do_timer() and us change them -arca+vojtech
- */
-
-	write_seqlock(&xtime_lock);
-
-/*
- * Do the timer stuff.
- */
-
-	do_timer(1);
-#ifndef CONFIG_SMP
-	update_process_times(user_mode(get_irq_regs()));
-#endif
-
-/*
- * In the SMP case we use the local APIC timer interrupt to do the profiling,
- * except when we simulate SMP mode on a uniprocessor system, in that case we
- * have to call the local interrupt handler.
- */
-
-	if (!using_apic_timer)
-		smp_local_timer_interrupt();
-
-	write_sequnlock(&xtime_lock);
-}
-
-static irqreturn_t timer_interrupt(int irq, void *dev_id)
-{
-	if (apic_runs_main_timer > 1)
-		return IRQ_HANDLED;
-	main_timer_handler();
-	if (using_apic_timer)
-		smp_send_timer_broadcast_ipi();
-	return IRQ_HANDLED;
-}
-
-unsigned long read_persistent_clock(void)
-{
-	unsigned int year, mon, day, hour, min, sec;
-	unsigned long flags;
-	unsigned century = 0;
-
-	spin_lock_irqsave(&rtc_lock, flags);
-
-	do {
-		sec = CMOS_READ(RTC_SECONDS);
-		min = CMOS_READ(RTC_MINUTES);
-		hour = CMOS_READ(RTC_HOURS);
-		day = CMOS_READ(RTC_DAY_OF_MONTH);
-		mon = CMOS_READ(RTC_MONTH);
-		year = CMOS_READ(RTC_YEAR);
-#ifdef CONFIG_ACPI
-		if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID &&
-					acpi_gbl_FADT.century)
-			century = CMOS_READ(acpi_gbl_FADT.century);
-#endif
-	} while (sec != CMOS_READ(RTC_SECONDS));
-
-	spin_unlock_irqrestore(&rtc_lock, flags);
-
-	/*
-	 * We know that x86-64 always uses BCD format, no need to check the
-	 * config register.
-	 */
-
-	BCD_TO_BIN(sec);
-	BCD_TO_BIN(min);
-	BCD_TO_BIN(hour);
-	BCD_TO_BIN(day);
-	BCD_TO_BIN(mon);
-	BCD_TO_BIN(year);
-
-	if (century) {
-		BCD_TO_BIN(century);
-		year += century * 100;
-		printk(KERN_INFO "Extended CMOS year: %d\n", century * 100);
-	} else {
-		/*
-		 * x86-64 systems only exists since 2002.
-		 * This will work up to Dec 31, 2100
-		 */
-		year += 2000;
-	}
-
-	return mktime(year, mon, day, hour, min, sec);
-}
-
-/* calibrate_cpu is used on systems with fixed rate TSCs to determine
- * processor frequency */
-#define TICK_COUNT 100000000
-static unsigned int __init tsc_calibrate_cpu_khz(void)
-{
-	int tsc_start, tsc_now;
-	int i, no_ctr_free;
-	unsigned long evntsel3 = 0, pmc3 = 0, pmc_now = 0;
-	unsigned long flags;
-
-	for (i = 0; i < 4; i++)
-		if (avail_to_resrv_perfctr_nmi_bit(i))
-			break;
-	no_ctr_free = (i == 4);
-	if (no_ctr_free) {
-		i = 3;
-		rdmsrl(MSR_K7_EVNTSEL3, evntsel3);
-		wrmsrl(MSR_K7_EVNTSEL3, 0);
-		rdmsrl(MSR_K7_PERFCTR3, pmc3);
-	} else {
-		reserve_perfctr_nmi(MSR_K7_PERFCTR0 + i);
-		reserve_evntsel_nmi(MSR_K7_EVNTSEL0 + i);
-	}
-	local_irq_save(flags);
-	/* start meauring cycles, incrementing from 0 */
-	wrmsrl(MSR_K7_PERFCTR0 + i, 0);
-	wrmsrl(MSR_K7_EVNTSEL0 + i, 1 << 22 | 3 << 16 | 0x76);
-	rdtscl(tsc_start);
-	do {
-		rdmsrl(MSR_K7_PERFCTR0 + i, pmc_now);
-		tsc_now = get_cycles_sync();
-	} while ((tsc_now - tsc_start) < TICK_COUNT);
-
-	local_irq_restore(flags);
-	if (no_ctr_free) {
-		wrmsrl(MSR_K7_EVNTSEL3, 0);
-		wrmsrl(MSR_K7_PERFCTR3, pmc3);
-		wrmsrl(MSR_K7_EVNTSEL3, evntsel3);
-	} else {
-		release_perfctr_nmi(MSR_K7_PERFCTR0 + i);
-		release_evntsel_nmi(MSR_K7_EVNTSEL0 + i);
-	}
-
-	return pmc_now * tsc_khz / (tsc_now - tsc_start);
-}
-
-/*
- * pit_calibrate_tsc() uses the speaker output (channel 2) of
- * the PIT. This is better than using the timer interrupt output,
- * because we can read the value of the speaker with just one inb(),
- * where we need three i/o operations for the interrupt channel.
- * We count how many ticks the TSC does in 50 ms.
- */
-
-static unsigned int __init pit_calibrate_tsc(void)
-{
-	unsigned long start, end;
-	unsigned long flags;
-
-	spin_lock_irqsave(&i8253_lock, flags);
-
-	outb((inb(0x61) & ~0x02) | 0x01, 0x61);
-
-	outb(0xb0, 0x43);
-	outb((PIT_TICK_RATE / (1000 / 50)) & 0xff, 0x42);
-	outb((PIT_TICK_RATE / (1000 / 50)) >> 8, 0x42);
-	start = get_cycles_sync();
-	while ((inb(0x61) & 0x20) == 0);
-	end = get_cycles_sync();
-
-	spin_unlock_irqrestore(&i8253_lock, flags);
-
-	return (end - start) / 50;
-}
-
-#define PIT_MODE 0x43
-#define PIT_CH0  0x40
-
-static void __pit_init(int val, u8 mode)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&i8253_lock, flags);
-	outb_p(mode, PIT_MODE);
-	outb_p(val & 0xff, PIT_CH0);	/* LSB */
-	outb_p(val >> 8, PIT_CH0);	/* MSB */
-	spin_unlock_irqrestore(&i8253_lock, flags);
-}
-
-void __init pit_init(void)
-{
-	__pit_init(LATCH, 0x34); /* binary, mode 2, LSB/MSB, ch 0 */
-}
-
-void pit_stop_interrupt(void)
-{
-	__pit_init(0, 0x30); /* mode 0 */
-}
-
-void stop_timer_interrupt(void)
-{
-	char *name;
-	if (hpet_address) {
-		name = "HPET";
-		hpet_timer_stop_set_go(0);
-	} else {
-		name = "PIT";
-		pit_stop_interrupt();
-	}
-	printk(KERN_INFO "timer: %s interrupt stopped.\n", name);
-}
-
-static struct irqaction irq0 = {
-	.handler	= timer_interrupt,
-	.flags		= IRQF_DISABLED | IRQF_IRQPOLL,
-	.mask		= CPU_MASK_NONE,
-	.name		= "timer"
-};
-
-void __init time_init(void)
-{
-	if (nohpet)
-		hpet_address = 0;
-
-	if (hpet_arch_init())
-		hpet_address = 0;
-
-	if (hpet_use_timer) {
-		/* set tick_nsec to use the proper rate for HPET */
-		tick_nsec = TICK_NSEC_HPET;
-		tsc_khz = hpet_calibrate_tsc();
-		timename = "HPET";
-	} else {
-		pit_init();
-		tsc_khz = pit_calibrate_tsc();
-		timename = "PIT";
-	}
-
-	cpu_khz = tsc_khz;
-	if (cpu_has(&boot_cpu_data, X86_FEATURE_CONSTANT_TSC) &&
-		boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
-		boot_cpu_data.x86 == 16)
-		cpu_khz = tsc_calibrate_cpu_khz();
-
-	if (unsynchronized_tsc())
-		mark_tsc_unstable("TSCs unsynchronized");
-
-	if (cpu_has(&boot_cpu_data, X86_FEATURE_RDTSCP))
-		vgetcpu_mode = VGETCPU_RDTSCP;
-	else
-		vgetcpu_mode = VGETCPU_LSL;
-
-	set_cyc2ns_scale(tsc_khz);
-	printk(KERN_INFO "time.c: Detected %d.%03d MHz processor.\n",
-		cpu_khz / 1000, cpu_khz % 1000);
-	init_tsc_clocksource();
-
-	setup_irq(0, &irq0);
-}
-
-/*
- * sysfs support for the timer.
- */
-
-static int timer_suspend(struct sys_device *dev, pm_message_t state)
-{
-	return 0;
-}
-
-static int timer_resume(struct sys_device *dev)
-{
-	if (hpet_address)
-		hpet_reenable();
-	else
-		i8254_timer_resume();
-	return 0;
-}
-
-static struct sysdev_class timer_sysclass = {
-	.resume = timer_resume,
-	.suspend = timer_suspend,
-	set_kset_name("timer"),
-};
-
-/* XXX this sysfs stuff should probably go elsewhere later -john */
-static struct sys_device device_timer = {
-	.id	= 0,
-	.cls	= &timer_sysclass,
-};
-
-static int time_init_device(void)
-{
-	int error = sysdev_class_register(&timer_sysclass);
-	if (!error)
-		error = sysdev_register(&device_timer);
-	return error;
-}
-
-device_initcall(time_init_device);
diff --git a/arch/x86_64/kernel/trampoline_64.S b/arch/x86_64/kernel/trampoline_64.S
deleted file mode 100644
index 607983b..0000000
--- a/arch/x86_64/kernel/trampoline_64.S
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- *
- *	Trampoline.S	Derived from Setup.S by Linus Torvalds
- *
- *	4 Jan 1997 Michael Chastain: changed to gnu as.
- *	15 Sept 2005 Eric Biederman: 64bit PIC support
- *
- *	Entry: CS:IP point to the start of our code, we are 
- *	in real mode with no stack, but the rest of the 
- *	trampoline page to make our stack and everything else
- *	is a mystery.
- *
- *	In fact we don't actually need a stack so we don't
- *	set one up.
- *
- *	On entry to trampoline_data, the processor is in real mode
- *	with 16-bit addressing and 16-bit data.  CS has some value
- *	and IP is zero.  Thus, data addresses need to be absolute
- *	(no relocation) and are taken with regard to r_base.
- *
- *	With the addition of trampoline_level4_pgt this code can
- *	now enter a 64bit kernel that lives at arbitrary 64bit
- *	physical addresses.
- *
- *	If you work on this file, check the object module with objdump
- *	--full-contents --reloc to make sure there are no relocation
- *	entries.
- */
-
-#include <linux/linkage.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/msr.h>
-#include <asm/segment.h>
-
-.data
-
-.code16
-
-ENTRY(trampoline_data)
-r_base = .
-	cli			# We should be safe anyway
-	wbinvd	
-	mov	%cs, %ax	# Code and data in the same place
-	mov	%ax, %ds
-	mov	%ax, %es
-	mov	%ax, %ss
-
-
-	movl	$0xA5A5A5A5, trampoline_data - r_base
-				# write marker for master knows we're running
-
-					# Setup stack
-	movw	$(trampoline_stack_end - r_base), %sp
-
-	call	verify_cpu		# Verify the cpu supports long mode
-	testl   %eax, %eax		# Check for return code
-	jnz	no_longmode
-
-	mov	%cs, %ax
-	movzx	%ax, %esi		# Find the 32bit trampoline location
-	shll	$4, %esi
-
-					# Fixup the vectors
-	addl	%esi, startup_32_vector - r_base
-	addl	%esi, startup_64_vector - r_base
-	addl	%esi, tgdt + 2 - r_base	# Fixup the gdt pointer
-
-	/*
-	 * GDT tables in non default location kernel can be beyond 16MB and
-	 * lgdt will not be able to load the address as in real mode default
-	 * operand size is 16bit. Use lgdtl instead to force operand size
-	 * to 32 bit.
-	 */
-
-	lidtl	tidt - r_base	# load idt with 0, 0
-	lgdtl	tgdt - r_base	# load gdt with whatever is appropriate
-
-	xor	%ax, %ax
-	inc	%ax		# protected mode (PE) bit
-	lmsw	%ax		# into protected mode
-
-	# flush prefetch and jump to startup_32
-	ljmpl	*(startup_32_vector - r_base)
-
-	.code32
-	.balign 4
-startup_32:
-	movl	$__KERNEL_DS, %eax	# Initialize the %ds segment register
-	movl	%eax, %ds
-
-	xorl	%eax, %eax
-	btsl	$5, %eax		# Enable PAE mode
-	movl	%eax, %cr4
-
-					# Setup trampoline 4 level pagetables
-	leal	(trampoline_level4_pgt - r_base)(%esi), %eax
-	movl	%eax, %cr3
-
-	movl	$MSR_EFER, %ecx
-	movl	$(1 << _EFER_LME), %eax	# Enable Long Mode
-	xorl	%edx, %edx
-	wrmsr
-
-	xorl	%eax, %eax
-	btsl	$31, %eax		# Enable paging and in turn activate Long Mode
-	btsl	$0, %eax		# Enable protected mode
-	movl	%eax, %cr0
-
-	/*
-	 * At this point we're in long mode but in 32bit compatibility mode
-	 * with EFER.LME = 1, CS.L = 0, CS.D = 1 (and in turn
-	 * EFER.LMA = 1). Now we want to jump in 64bit mode, to do that we use
-	 * the new gdt/idt that has __KERNEL_CS with CS.L = 1.
-	 */
-	ljmp	*(startup_64_vector - r_base)(%esi)
-
-	.code64
-	.balign 4
-startup_64:
-	# Now jump into the kernel using virtual addresses
-	movq	$secondary_startup_64, %rax
-	jmp	*%rax
-
-	.code16
-no_longmode:
-	hlt
-	jmp no_longmode
-#include "verify_cpu_64.S"
-
-	# Careful these need to be in the same 64K segment as the above;
-tidt:
-	.word	0			# idt limit = 0
-	.word	0, 0			# idt base = 0L
-
-	# Duplicate the global descriptor table
-	# so the kernel can live anywhere
-	.balign 4
-tgdt:
-	.short	tgdt_end - tgdt		# gdt limit
-	.long	tgdt - r_base
-	.short 0
-	.quad	0x00cf9b000000ffff	# __KERNEL32_CS
-	.quad	0x00af9b000000ffff	# __KERNEL_CS
-	.quad	0x00cf93000000ffff	# __KERNEL_DS
-tgdt_end:
-
-	.balign 4
-startup_32_vector:
-	.long	startup_32 - r_base
-	.word	__KERNEL32_CS, 0
-
-	.balign 4
-startup_64_vector:
-	.long	startup_64 - r_base
-	.word	__KERNEL_CS, 0
-
-trampoline_stack:
-	.org 0x1000
-trampoline_stack_end:
-ENTRY(trampoline_level4_pgt)
-	.quad	level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE
-	.fill	510,8,0
-	.quad	level3_kernel_pgt - __START_KERNEL_map + _KERNPG_TABLE
-
-ENTRY(trampoline_end)
diff --git a/arch/x86_64/kernel/traps_64.c b/arch/x86_64/kernel/traps_64.c
deleted file mode 100644
index 0388842..0000000
--- a/arch/x86_64/kernel/traps_64.c
+++ /dev/null
@@ -1,1138 +0,0 @@
-/*
- *  linux/arch/x86-64/traps.c
- *
- *  Copyright (C) 1991, 1992  Linus Torvalds
- *  Copyright (C) 2000, 2001, 2002 Andi Kleen, SuSE Labs
- *
- *  Pentium III FXSR, SSE support
- *	Gareth Hughes <gareth@valinux.com>, May 2000
- */
-
-/*
- * 'Traps.c' handles hardware traps and faults after we have saved some
- * state in 'entry.S'.
- */
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/ptrace.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
-#include <linux/kallsyms.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/nmi.h>
-#include <linux/kprobes.h>
-#include <linux/kexec.h>
-#include <linux/unwind.h>
-#include <linux/uaccess.h>
-#include <linux/bug.h>
-#include <linux/kdebug.h>
-
-#if defined(CONFIG_EDAC)
-#include <linux/edac.h>
-#endif
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/atomic.h>
-#include <asm/debugreg.h>
-#include <asm/desc.h>
-#include <asm/i387.h>
-#include <asm/processor.h>
-#include <asm/unwind.h>
-#include <asm/smp.h>
-#include <asm/pgalloc.h>
-#include <asm/pda.h>
-#include <asm/proto.h>
-#include <asm/nmi.h>
-#include <asm/stacktrace.h>
-
-asmlinkage void divide_error(void);
-asmlinkage void debug(void);
-asmlinkage void nmi(void);
-asmlinkage void int3(void);
-asmlinkage void overflow(void);
-asmlinkage void bounds(void);
-asmlinkage void invalid_op(void);
-asmlinkage void device_not_available(void);
-asmlinkage void double_fault(void);
-asmlinkage void coprocessor_segment_overrun(void);
-asmlinkage void invalid_TSS(void);
-asmlinkage void segment_not_present(void);
-asmlinkage void stack_segment(void);
-asmlinkage void general_protection(void);
-asmlinkage void page_fault(void);
-asmlinkage void coprocessor_error(void);
-asmlinkage void simd_coprocessor_error(void);
-asmlinkage void reserved(void);
-asmlinkage void alignment_check(void);
-asmlinkage void machine_check(void);
-asmlinkage void spurious_interrupt_bug(void);
-
-static inline void conditional_sti(struct pt_regs *regs)
-{
-	if (regs->eflags & X86_EFLAGS_IF)
-		local_irq_enable();
-}
-
-static inline void preempt_conditional_sti(struct pt_regs *regs)
-{
-	preempt_disable();
-	if (regs->eflags & X86_EFLAGS_IF)
-		local_irq_enable();
-}
-
-static inline void preempt_conditional_cli(struct pt_regs *regs)
-{
-	if (regs->eflags & X86_EFLAGS_IF)
-		local_irq_disable();
-	/* Make sure to not schedule here because we could be running
-	   on an exception stack. */
-	preempt_enable_no_resched();
-}
-
-int kstack_depth_to_print = 12;
-
-#ifdef CONFIG_KALLSYMS
-void printk_address(unsigned long address)
-{
-	unsigned long offset = 0, symsize;
-	const char *symname;
-	char *modname;
-	char *delim = ":";
-	char namebuf[128];
-
-	symname = kallsyms_lookup(address, &symsize, &offset,
-					&modname, namebuf);
-	if (!symname) {
-		printk(" [<%016lx>]\n", address);
-		return;
-	}
-	if (!modname)
-		modname = delim = ""; 		
-	printk(" [<%016lx>] %s%s%s%s+0x%lx/0x%lx\n",
-		address, delim, modname, delim, symname, offset, symsize);
-}
-#else
-void printk_address(unsigned long address)
-{
-	printk(" [<%016lx>]\n", address);
-}
-#endif
-
-static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack,
-					unsigned *usedp, char **idp)
-{
-	static char ids[][8] = {
-		[DEBUG_STACK - 1] = "#DB",
-		[NMI_STACK - 1] = "NMI",
-		[DOUBLEFAULT_STACK - 1] = "#DF",
-		[STACKFAULT_STACK - 1] = "#SS",
-		[MCE_STACK - 1] = "#MC",
-#if DEBUG_STKSZ > EXCEPTION_STKSZ
-		[N_EXCEPTION_STACKS ... N_EXCEPTION_STACKS + DEBUG_STKSZ / EXCEPTION_STKSZ - 2] = "#DB[?]"
-#endif
-	};
-	unsigned k;
-
-	/*
-	 * Iterate over all exception stacks, and figure out whether
-	 * 'stack' is in one of them:
-	 */
-	for (k = 0; k < N_EXCEPTION_STACKS; k++) {
-		unsigned long end = per_cpu(orig_ist, cpu).ist[k];
-		/*
-		 * Is 'stack' above this exception frame's end?
-		 * If yes then skip to the next frame.
-		 */
-		if (stack >= end)
-			continue;
-		/*
-		 * Is 'stack' above this exception frame's start address?
-		 * If yes then we found the right frame.
-		 */
-		if (stack >= end - EXCEPTION_STKSZ) {
-			/*
-			 * Make sure we only iterate through an exception
-			 * stack once. If it comes up for the second time
-			 * then there's something wrong going on - just
-			 * break out and return NULL:
-			 */
-			if (*usedp & (1U << k))
-				break;
-			*usedp |= 1U << k;
-			*idp = ids[k];
-			return (unsigned long *)end;
-		}
-		/*
-		 * If this is a debug stack, and if it has a larger size than
-		 * the usual exception stacks, then 'stack' might still
-		 * be within the lower portion of the debug stack:
-		 */
-#if DEBUG_STKSZ > EXCEPTION_STKSZ
-		if (k == DEBUG_STACK - 1 && stack >= end - DEBUG_STKSZ) {
-			unsigned j = N_EXCEPTION_STACKS - 1;
-
-			/*
-			 * Black magic. A large debug stack is composed of
-			 * multiple exception stack entries, which we
-			 * iterate through now. Dont look:
-			 */
-			do {
-				++j;
-				end -= EXCEPTION_STKSZ;
-				ids[j][4] = '1' + (j - N_EXCEPTION_STACKS);
-			} while (stack < end - EXCEPTION_STKSZ);
-			if (*usedp & (1U << j))
-				break;
-			*usedp |= 1U << j;
-			*idp = ids[j];
-			return (unsigned long *)end;
-		}
-#endif
-	}
-	return NULL;
-}
-
-#define MSG(txt) ops->warning(data, txt)
-
-/*
- * x86-64 can have upto three kernel stacks: 
- * process stack
- * interrupt stack
- * severe exception (double fault, nmi, stack fault, debug, mce) hardware stack
- */
-
-static inline int valid_stack_ptr(struct thread_info *tinfo, void *p)
-{
-	void *t = (void *)tinfo;
-        return p > t && p < t + THREAD_SIZE - 3;
-}
-
-void dump_trace(struct task_struct *tsk, struct pt_regs *regs,
-		unsigned long *stack,
-		struct stacktrace_ops *ops, void *data)
-{
-	const unsigned cpu = get_cpu();
-	unsigned long *irqstack_end = (unsigned long*)cpu_pda(cpu)->irqstackptr;
-	unsigned used = 0;
-	struct thread_info *tinfo;
-
-	if (!tsk)
-		tsk = current;
-
-	if (!stack) {
-		unsigned long dummy;
-		stack = &dummy;
-		if (tsk && tsk != current)
-			stack = (unsigned long *)tsk->thread.rsp;
-	}
-
-	/*
-	 * Print function call entries within a stack. 'cond' is the
-	 * "end of stackframe" condition, that the 'stack++'
-	 * iteration will eventually trigger.
-	 */
-#define HANDLE_STACK(cond) \
-	do while (cond) { \
-		unsigned long addr = *stack++; \
-		/* Use unlocked access here because except for NMIs	\
-		   we should be already protected against module unloads */ \
-		if (__kernel_text_address(addr)) { \
-			/* \
-			 * If the address is either in the text segment of the \
-			 * kernel, or in the region which contains vmalloc'ed \
-			 * memory, it *may* be the address of a calling \
-			 * routine; if so, print it so that someone tracing \
-			 * down the cause of the crash will be able to figure \
-			 * out the call path that was taken. \
-			 */ \
-			ops->address(data, addr);   \
-		} \
-	} while (0)
-
-	/*
-	 * Print function call entries in all stacks, starting at the
-	 * current stack address. If the stacks consist of nested
-	 * exceptions
-	 */
-	for (;;) {
-		char *id;
-		unsigned long *estack_end;
-		estack_end = in_exception_stack(cpu, (unsigned long)stack,
-						&used, &id);
-
-		if (estack_end) {
-			if (ops->stack(data, id) < 0)
-				break;
-			HANDLE_STACK (stack < estack_end);
-			ops->stack(data, "<EOE>");
-			/*
-			 * We link to the next stack via the
-			 * second-to-last pointer (index -2 to end) in the
-			 * exception stack:
-			 */
-			stack = (unsigned long *) estack_end[-2];
-			continue;
-		}
-		if (irqstack_end) {
-			unsigned long *irqstack;
-			irqstack = irqstack_end -
-				(IRQSTACKSIZE - 64) / sizeof(*irqstack);
-
-			if (stack >= irqstack && stack < irqstack_end) {
-				if (ops->stack(data, "IRQ") < 0)
-					break;
-				HANDLE_STACK (stack < irqstack_end);
-				/*
-				 * We link to the next stack (which would be
-				 * the process stack normally) the last
-				 * pointer (index -1 to end) in the IRQ stack:
-				 */
-				stack = (unsigned long *) (irqstack_end[-1]);
-				irqstack_end = NULL;
-				ops->stack(data, "EOI");
-				continue;
-			}
-		}
-		break;
-	}
-
-	/*
-	 * This handles the process stack:
-	 */
-	tinfo = task_thread_info(tsk);
-	HANDLE_STACK (valid_stack_ptr(tinfo, stack));
-#undef HANDLE_STACK
-	put_cpu();
-}
-EXPORT_SYMBOL(dump_trace);
-
-static void
-print_trace_warning_symbol(void *data, char *msg, unsigned long symbol)
-{
-	print_symbol(msg, symbol);
-	printk("\n");
-}
-
-static void print_trace_warning(void *data, char *msg)
-{
-	printk("%s\n", msg);
-}
-
-static int print_trace_stack(void *data, char *name)
-{
-	printk(" <%s> ", name);
-	return 0;
-}
-
-static void print_trace_address(void *data, unsigned long addr)
-{
-	touch_nmi_watchdog();
-	printk_address(addr);
-}
-
-static struct stacktrace_ops print_trace_ops = {
-	.warning = print_trace_warning,
-	.warning_symbol = print_trace_warning_symbol,
-	.stack = print_trace_stack,
-	.address = print_trace_address,
-};
-
-void
-show_trace(struct task_struct *tsk, struct pt_regs *regs, unsigned long *stack)
-{
-	printk("\nCall Trace:\n");
-	dump_trace(tsk, regs, stack, &print_trace_ops, NULL);
-	printk("\n");
-}
-
-static void
-_show_stack(struct task_struct *tsk, struct pt_regs *regs, unsigned long *rsp)
-{
-	unsigned long *stack;
-	int i;
-	const int cpu = smp_processor_id();
-	unsigned long *irqstack_end = (unsigned long *) (cpu_pda(cpu)->irqstackptr);
-	unsigned long *irqstack = (unsigned long *) (cpu_pda(cpu)->irqstackptr - IRQSTACKSIZE);
-
-	// debugging aid: "show_stack(NULL, NULL);" prints the
-	// back trace for this cpu.
-
-	if (rsp == NULL) {
-		if (tsk)
-			rsp = (unsigned long *)tsk->thread.rsp;
-		else
-			rsp = (unsigned long *)&rsp;
-	}
-
-	stack = rsp;
-	for(i=0; i < kstack_depth_to_print; i++) {
-		if (stack >= irqstack && stack <= irqstack_end) {
-			if (stack == irqstack_end) {
-				stack = (unsigned long *) (irqstack_end[-1]);
-				printk(" <EOI> ");
-			}
-		} else {
-		if (((long) stack & (THREAD_SIZE-1)) == 0)
-			break;
-		}
-		if (i && ((i % 4) == 0))
-			printk("\n");
-		printk(" %016lx", *stack++);
-		touch_nmi_watchdog();
-	}
-	show_trace(tsk, regs, rsp);
-}
-
-void show_stack(struct task_struct *tsk, unsigned long * rsp)
-{
-	_show_stack(tsk, NULL, rsp);
-}
-
-/*
- * The architecture-independent dump_stack generator
- */
-void dump_stack(void)
-{
-	unsigned long dummy;
-	show_trace(NULL, NULL, &dummy);
-}
-
-EXPORT_SYMBOL(dump_stack);
-
-void show_registers(struct pt_regs *regs)
-{
-	int i;
-	int in_kernel = !user_mode(regs);
-	unsigned long rsp;
-	const int cpu = smp_processor_id();
-	struct task_struct *cur = cpu_pda(cpu)->pcurrent;
-
-	rsp = regs->rsp;
-	printk("CPU %d ", cpu);
-	__show_regs(regs);
-	printk("Process %s (pid: %d, threadinfo %p, task %p)\n",
-		cur->comm, cur->pid, task_thread_info(cur), cur);
-
-	/*
-	 * When in-kernel, we also print out the stack and code at the
-	 * time of the fault..
-	 */
-	if (in_kernel) {
-		printk("Stack: ");
-		_show_stack(NULL, regs, (unsigned long*)rsp);
-
-		printk("\nCode: ");
-		if (regs->rip < PAGE_OFFSET)
-			goto bad;
-
-		for (i=0; i<20; i++) {
-			unsigned char c;
-			if (__get_user(c, &((unsigned char*)regs->rip)[i])) {
-bad:
-				printk(" Bad RIP value.");
-				break;
-			}
-			printk("%02x ", c);
-		}
-	}
-	printk("\n");
-}	
-
-int is_valid_bugaddr(unsigned long rip)
-{
-	unsigned short ud2;
-
-	if (__copy_from_user(&ud2, (const void __user *) rip, sizeof(ud2)))
-		return 0;
-
-	return ud2 == 0x0b0f;
-}
-
-#ifdef CONFIG_BUG
-void out_of_line_bug(void)
-{ 
-	BUG(); 
-} 
-EXPORT_SYMBOL(out_of_line_bug);
-#endif
-
-static DEFINE_SPINLOCK(die_lock);
-static int die_owner = -1;
-static unsigned int die_nest_count;
-
-unsigned __kprobes long oops_begin(void)
-{
-	int cpu;
-	unsigned long flags;
-
-	oops_enter();
-
-	/* racy, but better than risking deadlock. */
-	local_irq_save(flags);
-	cpu = smp_processor_id();
-	if (!spin_trylock(&die_lock)) { 
-		if (cpu == die_owner) 
-			/* nested oops. should stop eventually */;
-		else
-			spin_lock(&die_lock);
-	}
-	die_nest_count++;
-	die_owner = cpu;
-	console_verbose();
-	bust_spinlocks(1);
-	return flags;
-}
-
-void __kprobes oops_end(unsigned long flags)
-{ 
-	die_owner = -1;
-	bust_spinlocks(0);
-	die_nest_count--;
-	if (die_nest_count)
-		/* We still own the lock */
-		local_irq_restore(flags);
-	else
-		/* Nest count reaches zero, release the lock. */
-		spin_unlock_irqrestore(&die_lock, flags);
-	if (panic_on_oops)
-		panic("Fatal exception");
-	oops_exit();
-}
-
-void __kprobes __die(const char * str, struct pt_regs * regs, long err)
-{
-	static int die_counter;
-	printk(KERN_EMERG "%s: %04lx [%u] ", str, err & 0xffff,++die_counter);
-#ifdef CONFIG_PREEMPT
-	printk("PREEMPT ");
-#endif
-#ifdef CONFIG_SMP
-	printk("SMP ");
-#endif
-#ifdef CONFIG_DEBUG_PAGEALLOC
-	printk("DEBUG_PAGEALLOC");
-#endif
-	printk("\n");
-	notify_die(DIE_OOPS, str, regs, err, current->thread.trap_no, SIGSEGV);
-	show_registers(regs);
-	add_taint(TAINT_DIE);
-	/* Executive summary in case the oops scrolled away */
-	printk(KERN_ALERT "RIP ");
-	printk_address(regs->rip); 
-	printk(" RSP <%016lx>\n", regs->rsp); 
-	if (kexec_should_crash(current))
-		crash_kexec(regs);
-}
-
-void die(const char * str, struct pt_regs * regs, long err)
-{
-	unsigned long flags = oops_begin();
-
-	if (!user_mode(regs))
-		report_bug(regs->rip, regs);
-
-	__die(str, regs, err);
-	oops_end(flags);
-	do_exit(SIGSEGV); 
-}
-
-void __kprobes die_nmi(char *str, struct pt_regs *regs, int do_panic)
-{
-	unsigned long flags = oops_begin();
-
-	/*
-	 * We are in trouble anyway, lets at least try
-	 * to get a message out.
-	 */
-	printk(str, smp_processor_id());
-	show_registers(regs);
-	if (kexec_should_crash(current))
-		crash_kexec(regs);
-	if (do_panic || panic_on_oops)
-		panic("Non maskable interrupt");
-	oops_end(flags);
-	nmi_exit();
-	local_irq_enable();
-	do_exit(SIGSEGV);
-}
-
-static void __kprobes do_trap(int trapnr, int signr, char *str,
-			      struct pt_regs * regs, long error_code,
-			      siginfo_t *info)
-{
-	struct task_struct *tsk = current;
-
-	if (user_mode(regs)) {
-		/*
-		 * We want error_code and trap_no set for userspace
-		 * faults and kernelspace faults which result in
-		 * die(), but not kernelspace faults which are fixed
-		 * up.  die() gives the process no chance to handle
-		 * the signal and notice the kernel fault information,
-		 * so that won't result in polluting the information
-		 * about previously queued, but not yet delivered,
-		 * faults.  See also do_general_protection below.
-		 */
-		tsk->thread.error_code = error_code;
-		tsk->thread.trap_no = trapnr;
-
-		if (show_unhandled_signals && unhandled_signal(tsk, signr) &&
-		    printk_ratelimit())
-			printk(KERN_INFO
-			       "%s[%d] trap %s rip:%lx rsp:%lx error:%lx\n",
-			       tsk->comm, tsk->pid, str,
-			       regs->rip, regs->rsp, error_code); 
-
-		if (info)
-			force_sig_info(signr, info, tsk);
-		else
-			force_sig(signr, tsk);
-		return;
-	}
-
-
-	/* kernel trap */ 
-	{	     
-		const struct exception_table_entry *fixup;
-		fixup = search_exception_tables(regs->rip);
-		if (fixup)
-			regs->rip = fixup->fixup;
-		else {
-			tsk->thread.error_code = error_code;
-			tsk->thread.trap_no = trapnr;
-			die(str, regs, error_code);
-		}
-		return;
-	}
-}
-
-#define DO_ERROR(trapnr, signr, str, name) \
-asmlinkage void do_##name(struct pt_regs * regs, long error_code) \
-{ \
-	if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \
-							== NOTIFY_STOP) \
-		return; \
-	conditional_sti(regs);						\
-	do_trap(trapnr, signr, str, regs, error_code, NULL); \
-}
-
-#define DO_ERROR_INFO(trapnr, signr, str, name, sicode, siaddr) \
-asmlinkage void do_##name(struct pt_regs * regs, long error_code) \
-{ \
-	siginfo_t info; \
-	info.si_signo = signr; \
-	info.si_errno = 0; \
-	info.si_code = sicode; \
-	info.si_addr = (void __user *)siaddr; \
-	if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \
-							== NOTIFY_STOP) \
-		return; \
-	conditional_sti(regs);						\
-	do_trap(trapnr, signr, str, regs, error_code, &info); \
-}
-
-DO_ERROR_INFO( 0, SIGFPE,  "divide error", divide_error, FPE_INTDIV, regs->rip)
-DO_ERROR( 4, SIGSEGV, "overflow", overflow)
-DO_ERROR( 5, SIGSEGV, "bounds", bounds)
-DO_ERROR_INFO( 6, SIGILL,  "invalid opcode", invalid_op, ILL_ILLOPN, regs->rip)
-DO_ERROR( 7, SIGSEGV, "device not available", device_not_available)
-DO_ERROR( 9, SIGFPE,  "coprocessor segment overrun", coprocessor_segment_overrun)
-DO_ERROR(10, SIGSEGV, "invalid TSS", invalid_TSS)
-DO_ERROR(11, SIGBUS,  "segment not present", segment_not_present)
-DO_ERROR_INFO(17, SIGBUS, "alignment check", alignment_check, BUS_ADRALN, 0)
-DO_ERROR(18, SIGSEGV, "reserved", reserved)
-
-/* Runs on IST stack */
-asmlinkage void do_stack_segment(struct pt_regs *regs, long error_code)
-{
-	if (notify_die(DIE_TRAP, "stack segment", regs, error_code,
-			12, SIGBUS) == NOTIFY_STOP)
-		return;
-	preempt_conditional_sti(regs);
-	do_trap(12, SIGBUS, "stack segment", regs, error_code, NULL);
-	preempt_conditional_cli(regs);
-}
-
-asmlinkage void do_double_fault(struct pt_regs * regs, long error_code)
-{
-	static const char str[] = "double fault";
-	struct task_struct *tsk = current;
-
-	/* Return not checked because double check cannot be ignored */
-	notify_die(DIE_TRAP, str, regs, error_code, 8, SIGSEGV);
-
-	tsk->thread.error_code = error_code;
-	tsk->thread.trap_no = 8;
-
-	/* This is always a kernel trap and never fixable (and thus must
-	   never return). */
-	for (;;)
-		die(str, regs, error_code);
-}
-
-asmlinkage void __kprobes do_general_protection(struct pt_regs * regs,
-						long error_code)
-{
-	struct task_struct *tsk = current;
-
-	conditional_sti(regs);
-
-	if (user_mode(regs)) {
-		tsk->thread.error_code = error_code;
-		tsk->thread.trap_no = 13;
-
-		if (show_unhandled_signals && unhandled_signal(tsk, SIGSEGV) &&
-		    printk_ratelimit())
-			printk(KERN_INFO
-		       "%s[%d] general protection rip:%lx rsp:%lx error:%lx\n",
-			       tsk->comm, tsk->pid,
-			       regs->rip, regs->rsp, error_code); 
-
-		force_sig(SIGSEGV, tsk);
-		return;
-	} 
-
-	/* kernel gp */
-	{
-		const struct exception_table_entry *fixup;
-		fixup = search_exception_tables(regs->rip);
-		if (fixup) {
-			regs->rip = fixup->fixup;
-			return;
-		}
-
-		tsk->thread.error_code = error_code;
-		tsk->thread.trap_no = 13;
-		if (notify_die(DIE_GPF, "general protection fault", regs,
-					error_code, 13, SIGSEGV) == NOTIFY_STOP)
-			return;
-		die("general protection fault", regs, error_code);
-	}
-}
-
-static __kprobes void
-mem_parity_error(unsigned char reason, struct pt_regs * regs)
-{
-	printk(KERN_EMERG "Uhhuh. NMI received for unknown reason %02x.\n",
-		reason);
-	printk(KERN_EMERG "You have some hardware problem, likely on the PCI bus.\n");
-
-#if defined(CONFIG_EDAC)
-	if(edac_handler_set()) {
-		edac_atomic_assert_error();
-		return;
-	}
-#endif
-
-	if (panic_on_unrecovered_nmi)
-		panic("NMI: Not continuing");
-
-	printk(KERN_EMERG "Dazed and confused, but trying to continue\n");
-
-	/* Clear and disable the memory parity error line. */
-	reason = (reason & 0xf) | 4;
-	outb(reason, 0x61);
-}
-
-static __kprobes void
-io_check_error(unsigned char reason, struct pt_regs * regs)
-{
-	printk("NMI: IOCK error (debug interrupt?)\n");
-	show_registers(regs);
-
-	/* Re-enable the IOCK line, wait for a few seconds */
-	reason = (reason & 0xf) | 8;
-	outb(reason, 0x61);
-	mdelay(2000);
-	reason &= ~8;
-	outb(reason, 0x61);
-}
-
-static __kprobes void
-unknown_nmi_error(unsigned char reason, struct pt_regs * regs)
-{
-	printk(KERN_EMERG "Uhhuh. NMI received for unknown reason %02x.\n",
-		reason);
-	printk(KERN_EMERG "Do you have a strange power saving mode enabled?\n");
-
-	if (panic_on_unrecovered_nmi)
-		panic("NMI: Not continuing");
-
-	printk(KERN_EMERG "Dazed and confused, but trying to continue\n");
-}
-
-/* Runs on IST stack. This code must keep interrupts off all the time.
-   Nested NMIs are prevented by the CPU. */
-asmlinkage __kprobes void default_do_nmi(struct pt_regs *regs)
-{
-	unsigned char reason = 0;
-	int cpu;
-
-	cpu = smp_processor_id();
-
-	/* Only the BSP gets external NMIs from the system.  */
-	if (!cpu)
-		reason = get_nmi_reason();
-
-	if (!(reason & 0xc0)) {
-		if (notify_die(DIE_NMI_IPI, "nmi_ipi", regs, reason, 2, SIGINT)
-								== NOTIFY_STOP)
-			return;
-		/*
-		 * Ok, so this is none of the documented NMI sources,
-		 * so it must be the NMI watchdog.
-		 */
-		if (nmi_watchdog_tick(regs,reason))
-			return;
-		if (!do_nmi_callback(regs,cpu))
-			unknown_nmi_error(reason, regs);
-
-		return;
-	}
-	if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT) == NOTIFY_STOP)
-		return; 
-
-	/* AK: following checks seem to be broken on modern chipsets. FIXME */
-
-	if (reason & 0x80)
-		mem_parity_error(reason, regs);
-	if (reason & 0x40)
-		io_check_error(reason, regs);
-}
-
-/* runs on IST stack. */
-asmlinkage void __kprobes do_int3(struct pt_regs * regs, long error_code)
-{
-	if (notify_die(DIE_INT3, "int3", regs, error_code, 3, SIGTRAP) == NOTIFY_STOP) {
-		return;
-	}
-	preempt_conditional_sti(regs);
-	do_trap(3, SIGTRAP, "int3", regs, error_code, NULL);
-	preempt_conditional_cli(regs);
-}
-
-/* Help handler running on IST stack to switch back to user stack
-   for scheduling or signal handling. The actual stack switch is done in
-   entry.S */
-asmlinkage __kprobes struct pt_regs *sync_regs(struct pt_regs *eregs)
-{
-	struct pt_regs *regs = eregs;
-	/* Did already sync */
-	if (eregs == (struct pt_regs *)eregs->rsp)
-		;
-	/* Exception from user space */
-	else if (user_mode(eregs))
-		regs = task_pt_regs(current);
-	/* Exception from kernel and interrupts are enabled. Move to
- 	   kernel process stack. */
-	else if (eregs->eflags & X86_EFLAGS_IF)
-		regs = (struct pt_regs *)(eregs->rsp -= sizeof(struct pt_regs));
-	if (eregs != regs)
-		*regs = *eregs;
-	return regs;
-}
-
-/* runs on IST stack. */
-asmlinkage void __kprobes do_debug(struct pt_regs * regs,
-				   unsigned long error_code)
-{
-	unsigned long condition;
-	struct task_struct *tsk = current;
-	siginfo_t info;
-
-	get_debugreg(condition, 6);
-
-	if (notify_die(DIE_DEBUG, "debug", regs, condition, error_code,
-						SIGTRAP) == NOTIFY_STOP)
-		return;
-
-	preempt_conditional_sti(regs);
-
-	/* Mask out spurious debug traps due to lazy DR7 setting */
-	if (condition & (DR_TRAP0|DR_TRAP1|DR_TRAP2|DR_TRAP3)) {
-		if (!tsk->thread.debugreg7) { 
-			goto clear_dr7;
-		}
-	}
-
-	tsk->thread.debugreg6 = condition;
-
-	/* Mask out spurious TF errors due to lazy TF clearing */
-	if (condition & DR_STEP) {
-		/*
-		 * The TF error should be masked out only if the current
-		 * process is not traced and if the TRAP flag has been set
-		 * previously by a tracing process (condition detected by
-		 * the PT_DTRACE flag); remember that the i386 TRAP flag
-		 * can be modified by the process itself in user mode,
-		 * allowing programs to debug themselves without the ptrace()
-		 * interface.
-		 */
-                if (!user_mode(regs))
-                       goto clear_TF_reenable;
-		/*
-		 * Was the TF flag set by a debugger? If so, clear it now,
-		 * so that register information is correct.
-		 */
-		if (tsk->ptrace & PT_DTRACE) {
-			regs->eflags &= ~TF_MASK;
-			tsk->ptrace &= ~PT_DTRACE;
-		}
-	}
-
-	/* Ok, finally something we can handle */
-	tsk->thread.trap_no = 1;
-	tsk->thread.error_code = error_code;
-	info.si_signo = SIGTRAP;
-	info.si_errno = 0;
-	info.si_code = TRAP_BRKPT;
-	info.si_addr = user_mode(regs) ? (void __user *)regs->rip : NULL;
-	force_sig_info(SIGTRAP, &info, tsk);
-
-clear_dr7:
-	set_debugreg(0UL, 7);
-	preempt_conditional_cli(regs);
-	return;
-
-clear_TF_reenable:
-	set_tsk_thread_flag(tsk, TIF_SINGLESTEP);
-	regs->eflags &= ~TF_MASK;
-	preempt_conditional_cli(regs);
-}
-
-static int kernel_math_error(struct pt_regs *regs, const char *str, int trapnr)
-{
-	const struct exception_table_entry *fixup;
-	fixup = search_exception_tables(regs->rip);
-	if (fixup) {
-		regs->rip = fixup->fixup;
-		return 1;
-	}
-	notify_die(DIE_GPF, str, regs, 0, trapnr, SIGFPE);
-	/* Illegal floating point operation in the kernel */
-	current->thread.trap_no = trapnr;
-	die(str, regs, 0);
-	return 0;
-}
-
-/*
- * Note that we play around with the 'TS' bit in an attempt to get
- * the correct behaviour even in the presence of the asynchronous
- * IRQ13 behaviour
- */
-asmlinkage void do_coprocessor_error(struct pt_regs *regs)
-{
-	void __user *rip = (void __user *)(regs->rip);
-	struct task_struct * task;
-	siginfo_t info;
-	unsigned short cwd, swd;
-
-	conditional_sti(regs);
-	if (!user_mode(regs) &&
-	    kernel_math_error(regs, "kernel x87 math error", 16))
-		return;
-
-	/*
-	 * Save the info for the exception handler and clear the error.
-	 */
-	task = current;
-	save_init_fpu(task);
-	task->thread.trap_no = 16;
-	task->thread.error_code = 0;
-	info.si_signo = SIGFPE;
-	info.si_errno = 0;
-	info.si_code = __SI_FAULT;
-	info.si_addr = rip;
-	/*
-	 * (~cwd & swd) will mask out exceptions that are not set to unmasked
-	 * status.  0x3f is the exception bits in these regs, 0x200 is the
-	 * C1 reg you need in case of a stack fault, 0x040 is the stack
-	 * fault bit.  We should only be taking one exception at a time,
-	 * so if this combination doesn't produce any single exception,
-	 * then we have a bad program that isn't synchronizing its FPU usage
-	 * and it will suffer the consequences since we won't be able to
-	 * fully reproduce the context of the exception
-	 */
-	cwd = get_fpu_cwd(task);
-	swd = get_fpu_swd(task);
-	switch (swd & ~cwd & 0x3f) {
-		case 0x000:
-		default:
-			break;
-		case 0x001: /* Invalid Op */
-			/*
-			 * swd & 0x240 == 0x040: Stack Underflow
-			 * swd & 0x240 == 0x240: Stack Overflow
-			 * User must clear the SF bit (0x40) if set
-			 */
-			info.si_code = FPE_FLTINV;
-			break;
-		case 0x002: /* Denormalize */
-		case 0x010: /* Underflow */
-			info.si_code = FPE_FLTUND;
-			break;
-		case 0x004: /* Zero Divide */
-			info.si_code = FPE_FLTDIV;
-			break;
-		case 0x008: /* Overflow */
-			info.si_code = FPE_FLTOVF;
-			break;
-		case 0x020: /* Precision */
-			info.si_code = FPE_FLTRES;
-			break;
-	}
-	force_sig_info(SIGFPE, &info, task);
-}
-
-asmlinkage void bad_intr(void)
-{
-	printk("bad interrupt"); 
-}
-
-asmlinkage void do_simd_coprocessor_error(struct pt_regs *regs)
-{
-	void __user *rip = (void __user *)(regs->rip);
-	struct task_struct * task;
-	siginfo_t info;
-	unsigned short mxcsr;
-
-	conditional_sti(regs);
-	if (!user_mode(regs) &&
-        	kernel_math_error(regs, "kernel simd math error", 19))
-		return;
-
-	/*
-	 * Save the info for the exception handler and clear the error.
-	 */
-	task = current;
-	save_init_fpu(task);
-	task->thread.trap_no = 19;
-	task->thread.error_code = 0;
-	info.si_signo = SIGFPE;
-	info.si_errno = 0;
-	info.si_code = __SI_FAULT;
-	info.si_addr = rip;
-	/*
-	 * The SIMD FPU exceptions are handled a little differently, as there
-	 * is only a single status/control register.  Thus, to determine which
-	 * unmasked exception was caught we must mask the exception mask bits
-	 * at 0x1f80, and then use these to mask the exception bits at 0x3f.
-	 */
-	mxcsr = get_fpu_mxcsr(task);
-	switch (~((mxcsr & 0x1f80) >> 7) & (mxcsr & 0x3f)) {
-		case 0x000:
-		default:
-			break;
-		case 0x001: /* Invalid Op */
-			info.si_code = FPE_FLTINV;
-			break;
-		case 0x002: /* Denormalize */
-		case 0x010: /* Underflow */
-			info.si_code = FPE_FLTUND;
-			break;
-		case 0x004: /* Zero Divide */
-			info.si_code = FPE_FLTDIV;
-			break;
-		case 0x008: /* Overflow */
-			info.si_code = FPE_FLTOVF;
-			break;
-		case 0x020: /* Precision */
-			info.si_code = FPE_FLTRES;
-			break;
-	}
-	force_sig_info(SIGFPE, &info, task);
-}
-
-asmlinkage void do_spurious_interrupt_bug(struct pt_regs * regs)
-{
-}
-
-asmlinkage void __attribute__((weak)) smp_thermal_interrupt(void)
-{
-}
-
-asmlinkage void __attribute__((weak)) mce_threshold_interrupt(void)
-{
-}
-
-/*
- *  'math_state_restore()' saves the current math information in the
- * old math state array, and gets the new ones from the current task
- *
- * Careful.. There are problems with IBM-designed IRQ13 behaviour.
- * Don't touch unless you *really* know how it works.
- */
-asmlinkage void math_state_restore(void)
-{
-	struct task_struct *me = current;
-	clts();			/* Allow maths ops (or we recurse) */
-
-	if (!used_math())
-		init_fpu(me);
-	restore_fpu_checking(&me->thread.i387.fxsave);
-	task_thread_info(me)->status |= TS_USEDFPU;
-	me->fpu_counter++;
-}
-
-void __init trap_init(void)
-{
-	set_intr_gate(0,&divide_error);
-	set_intr_gate_ist(1,&debug,DEBUG_STACK);
-	set_intr_gate_ist(2,&nmi,NMI_STACK);
- 	set_system_gate_ist(3,&int3,DEBUG_STACK); /* int3 can be called from all */
-	set_system_gate(4,&overflow);	/* int4 can be called from all */
-	set_intr_gate(5,&bounds);
-	set_intr_gate(6,&invalid_op);
-	set_intr_gate(7,&device_not_available);
-	set_intr_gate_ist(8,&double_fault, DOUBLEFAULT_STACK);
-	set_intr_gate(9,&coprocessor_segment_overrun);
-	set_intr_gate(10,&invalid_TSS);
-	set_intr_gate(11,&segment_not_present);
-	set_intr_gate_ist(12,&stack_segment,STACKFAULT_STACK);
-	set_intr_gate(13,&general_protection);
-	set_intr_gate(14,&page_fault);
-	set_intr_gate(15,&spurious_interrupt_bug);
-	set_intr_gate(16,&coprocessor_error);
-	set_intr_gate(17,&alignment_check);
-#ifdef CONFIG_X86_MCE
-	set_intr_gate_ist(18,&machine_check, MCE_STACK); 
-#endif
-	set_intr_gate(19,&simd_coprocessor_error);
-
-#ifdef CONFIG_IA32_EMULATION
-	set_system_gate(IA32_SYSCALL_VECTOR, ia32_syscall);
-#endif
-       
-	/*
-	 * Should be a barrier for any external CPU state.
-	 */
-	cpu_init();
-}
-
-
-static int __init oops_setup(char *s)
-{ 
-	if (!s)
-		return -EINVAL;
-	if (!strcmp(s, "panic"))
-		panic_on_oops = 1;
-	return 0;
-} 
-early_param("oops", oops_setup);
-
-static int __init kstack_setup(char *s)
-{
-	if (!s)
-		return -EINVAL;
-	kstack_depth_to_print = simple_strtoul(s,NULL,0);
-	return 0;
-}
-early_param("kstack", kstack_setup);
diff --git a/arch/x86_64/kernel/tsc_64.c b/arch/x86_64/kernel/tsc_64.c
deleted file mode 100644
index 2a59bde..0000000
--- a/arch/x86_64/kernel/tsc_64.c
+++ /dev/null
@@ -1,207 +0,0 @@
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/clocksource.h>
-#include <linux/time.h>
-#include <linux/acpi.h>
-#include <linux/cpufreq.h>
-
-#include <asm/timex.h>
-
-static int notsc __initdata = 0;
-
-unsigned int cpu_khz;		/* TSC clocks / usec, not used here */
-EXPORT_SYMBOL(cpu_khz);
-unsigned int tsc_khz;
-EXPORT_SYMBOL(tsc_khz);
-
-static unsigned int cyc2ns_scale __read_mostly;
-
-void set_cyc2ns_scale(unsigned long khz)
-{
-	cyc2ns_scale = (NSEC_PER_MSEC << NS_SCALE) / khz;
-}
-
-static unsigned long long cycles_2_ns(unsigned long long cyc)
-{
-	return (cyc * cyc2ns_scale) >> NS_SCALE;
-}
-
-unsigned long long sched_clock(void)
-{
-	unsigned long a = 0;
-
-	/* Could do CPU core sync here. Opteron can execute rdtsc speculatively,
-	 * which means it is not completely exact and may not be monotonous
-	 * between CPUs. But the errors should be too small to matter for
-	 * scheduling purposes.
-	 */
-
-	rdtscll(a);
-	return cycles_2_ns(a);
-}
-
-static int tsc_unstable;
-
-inline int check_tsc_unstable(void)
-{
-	return tsc_unstable;
-}
-#ifdef CONFIG_CPU_FREQ
-
-/* Frequency scaling support. Adjust the TSC based timer when the cpu frequency
- * changes.
- *
- * RED-PEN: On SMP we assume all CPUs run with the same frequency.  It's
- * not that important because current Opteron setups do not support
- * scaling on SMP anyroads.
- *
- * Should fix up last_tsc too. Currently gettimeofday in the
- * first tick after the change will be slightly wrong.
- */
-
-static unsigned int  ref_freq;
-static unsigned long loops_per_jiffy_ref;
-static unsigned long tsc_khz_ref;
-
-static int time_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
-				 void *data)
-{
-	struct cpufreq_freqs *freq = data;
-	unsigned long *lpj, dummy;
-
-	if (cpu_has(&cpu_data[freq->cpu], X86_FEATURE_CONSTANT_TSC))
-		return 0;
-
-	lpj = &dummy;
-	if (!(freq->flags & CPUFREQ_CONST_LOOPS))
-#ifdef CONFIG_SMP
-		lpj = &cpu_data[freq->cpu].loops_per_jiffy;
-#else
-		lpj = &boot_cpu_data.loops_per_jiffy;
-#endif
-
-	if (!ref_freq) {
-		ref_freq = freq->old;
-		loops_per_jiffy_ref = *lpj;
-		tsc_khz_ref = tsc_khz;
-	}
-	if ((val == CPUFREQ_PRECHANGE  && freq->old < freq->new) ||
-		(val == CPUFREQ_POSTCHANGE && freq->old > freq->new) ||
-		(val == CPUFREQ_RESUMECHANGE)) {
-		*lpj =
-		cpufreq_scale(loops_per_jiffy_ref, ref_freq, freq->new);
-
-		tsc_khz = cpufreq_scale(tsc_khz_ref, ref_freq, freq->new);
-		if (!(freq->flags & CPUFREQ_CONST_LOOPS))
-			mark_tsc_unstable("cpufreq changes");
-	}
-
-	set_cyc2ns_scale(tsc_khz_ref);
-
-	return 0;
-}
-
-static struct notifier_block time_cpufreq_notifier_block = {
-	.notifier_call  = time_cpufreq_notifier
-};
-
-static int __init cpufreq_tsc(void)
-{
-	cpufreq_register_notifier(&time_cpufreq_notifier_block,
-				  CPUFREQ_TRANSITION_NOTIFIER);
-	return 0;
-}
-
-core_initcall(cpufreq_tsc);
-
-#endif
-
-/*
- * Make an educated guess if the TSC is trustworthy and synchronized
- * over all CPUs.
- */
-__cpuinit int unsynchronized_tsc(void)
-{
-	if (tsc_unstable)
-		return 1;
-
-#ifdef CONFIG_SMP
-	if (apic_is_clustered_box())
-		return 1;
-#endif
-	/* Most intel systems have synchronized TSCs except for
-	   multi node systems */
-	if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) {
-#ifdef CONFIG_ACPI
-		/* But TSC doesn't tick in C3 so don't use it there */
-		if (acpi_gbl_FADT.header.length > 0 &&
-		    acpi_gbl_FADT.C3latency < 1000)
-			return 1;
-#endif
-		return 0;
-	}
-
-	/* Assume multi socket systems are not synchronized */
-	return num_present_cpus() > 1;
-}
-
-int __init notsc_setup(char *s)
-{
-	notsc = 1;
-	return 1;
-}
-
-__setup("notsc", notsc_setup);
-
-
-/* clock source code: */
-static cycle_t read_tsc(void)
-{
-	cycle_t ret = (cycle_t)get_cycles_sync();
-	return ret;
-}
-
-static cycle_t __vsyscall_fn vread_tsc(void)
-{
-	cycle_t ret = (cycle_t)get_cycles_sync();
-	return ret;
-}
-
-static struct clocksource clocksource_tsc = {
-	.name			= "tsc",
-	.rating			= 300,
-	.read			= read_tsc,
-	.mask			= CLOCKSOURCE_MASK(64),
-	.shift			= 22,
-	.flags			= CLOCK_SOURCE_IS_CONTINUOUS |
-				  CLOCK_SOURCE_MUST_VERIFY,
-	.vread			= vread_tsc,
-};
-
-void mark_tsc_unstable(char *reason)
-{
-	if (!tsc_unstable) {
-		tsc_unstable = 1;
-		printk("Marking TSC unstable due to %s\n", reason);
-		/* Change only the rating, when not registered */
-		if (clocksource_tsc.mult)
-			clocksource_change_rating(&clocksource_tsc, 0);
-		else
-			clocksource_tsc.rating = 0;
-	}
-}
-EXPORT_SYMBOL_GPL(mark_tsc_unstable);
-
-void __init init_tsc_clocksource(void)
-{
-	if (!notsc) {
-		clocksource_tsc.mult = clocksource_khz2mult(tsc_khz,
-							clocksource_tsc.shift);
-		if (check_tsc_unstable())
-			clocksource_tsc.rating = 0;
-
-		clocksource_register(&clocksource_tsc);
-	}
-}
diff --git a/arch/x86_64/kernel/tsc_sync.c b/arch/x86_64/kernel/tsc_sync.c
deleted file mode 100644
index 355f5f5..0000000
--- a/arch/x86_64/kernel/tsc_sync.c
+++ /dev/null
@@ -1,187 +0,0 @@
-/*
- * arch/x86_64/kernel/tsc_sync.c: check TSC synchronization.
- *
- * Copyright (C) 2006, Red Hat, Inc., Ingo Molnar
- *
- * We check whether all boot CPUs have their TSC's synchronized,
- * print a warning if not and turn off the TSC clock-source.
- *
- * The warp-check is point-to-point between two CPUs, the CPU
- * initiating the bootup is the 'source CPU', the freshly booting
- * CPU is the 'target CPU'.
- *
- * Only two CPUs may participate - they can enter in any order.
- * ( The serial nature of the boot logic and the CPU hotplug lock
- *   protects against more than 2 CPUs entering this code. )
- */
-#include <linux/spinlock.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/nmi.h>
-#include <asm/tsc.h>
-
-/*
- * Entry/exit counters that make sure that both CPUs
- * run the measurement code at once:
- */
-static __cpuinitdata atomic_t start_count;
-static __cpuinitdata atomic_t stop_count;
-
-/*
- * We use a raw spinlock in this exceptional case, because
- * we want to have the fastest, inlined, non-debug version
- * of a critical section, to be able to prove TSC time-warps:
- */
-static __cpuinitdata raw_spinlock_t sync_lock = __RAW_SPIN_LOCK_UNLOCKED;
-static __cpuinitdata cycles_t last_tsc;
-static __cpuinitdata cycles_t max_warp;
-static __cpuinitdata int nr_warps;
-
-/*
- * TSC-warp measurement loop running on both CPUs:
- */
-static __cpuinit void check_tsc_warp(void)
-{
-	cycles_t start, now, prev, end;
-	int i;
-
-	start = get_cycles_sync();
-	/*
-	 * The measurement runs for 20 msecs:
-	 */
-	end = start + tsc_khz * 20ULL;
-	now = start;
-
-	for (i = 0; ; i++) {
-		/*
-		 * We take the global lock, measure TSC, save the
-		 * previous TSC that was measured (possibly on
-		 * another CPU) and update the previous TSC timestamp.
-		 */
-		__raw_spin_lock(&sync_lock);
-		prev = last_tsc;
-		now = get_cycles_sync();
-		last_tsc = now;
-		__raw_spin_unlock(&sync_lock);
-
-		/*
-		 * Be nice every now and then (and also check whether
-		 * measurement is done [we also insert a 100 million
-		 * loops safety exit, so we dont lock up in case the
-		 * TSC readout is totally broken]):
-		 */
-		if (unlikely(!(i & 7))) {
-			if (now > end || i > 100000000)
-				break;
-			cpu_relax();
-			touch_nmi_watchdog();
-		}
-		/*
-		 * Outside the critical section we can now see whether
-		 * we saw a time-warp of the TSC going backwards:
-		 */
-		if (unlikely(prev > now)) {
-			__raw_spin_lock(&sync_lock);
-			max_warp = max(max_warp, prev - now);
-			nr_warps++;
-			__raw_spin_unlock(&sync_lock);
-		}
-
-	}
-}
-
-/*
- * Source CPU calls into this - it waits for the freshly booted
- * target CPU to arrive and then starts the measurement:
- */
-void __cpuinit check_tsc_sync_source(int cpu)
-{
-	int cpus = 2;
-
-	/*
-	 * No need to check if we already know that the TSC is not
-	 * synchronized:
-	 */
-	if (unsynchronized_tsc())
-		return;
-
-	printk(KERN_INFO "checking TSC synchronization [CPU#%d -> CPU#%d]:",
-			  smp_processor_id(), cpu);
-
-	/*
-	 * Reset it - in case this is a second bootup:
-	 */
-	atomic_set(&stop_count, 0);
-
-	/*
-	 * Wait for the target to arrive:
-	 */
-	while (atomic_read(&start_count) != cpus-1)
-		cpu_relax();
-	/*
-	 * Trigger the target to continue into the measurement too:
-	 */
-	atomic_inc(&start_count);
-
-	check_tsc_warp();
-
-	while (atomic_read(&stop_count) != cpus-1)
-		cpu_relax();
-
-	/*
-	 * Reset it - just in case we boot another CPU later:
-	 */
-	atomic_set(&start_count, 0);
-
-	if (nr_warps) {
-		printk("\n");
-		printk(KERN_WARNING "Measured %Ld cycles TSC warp between CPUs,"
-				    " turning off TSC clock.\n", max_warp);
-		mark_tsc_unstable("check_tsc_sync_source failed");
-		nr_warps = 0;
-		max_warp = 0;
-		last_tsc = 0;
-	} else {
-		printk(" passed.\n");
-	}
-
-	/*
-	 * Let the target continue with the bootup:
-	 */
-	atomic_inc(&stop_count);
-}
-
-/*
- * Freshly booted CPUs call into this:
- */
-void __cpuinit check_tsc_sync_target(void)
-{
-	int cpus = 2;
-
-	if (unsynchronized_tsc())
-		return;
-
-	/*
-	 * Register this CPU's participation and wait for the
-	 * source CPU to start the measurement:
-	 */
-	atomic_inc(&start_count);
-	while (atomic_read(&start_count) != cpus)
-		cpu_relax();
-
-	check_tsc_warp();
-
-	/*
-	 * Ok, we are done:
-	 */
-	atomic_inc(&stop_count);
-
-	/*
-	 * Wait for the source CPU to print stuff:
-	 */
-	while (atomic_read(&stop_count) != cpus)
-		cpu_relax();
-}
-#undef NR_LOOPS
-
diff --git a/arch/x86_64/kernel/verify_cpu_64.S b/arch/x86_64/kernel/verify_cpu_64.S
deleted file mode 100644
index 45b6f8a..0000000
--- a/arch/x86_64/kernel/verify_cpu_64.S
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- *
- *	verify_cpu.S - Code for cpu long mode and SSE verification. This
- *	code has been borrowed from boot/setup.S and was introduced by
- * 	Andi Kleen.
- *
- *	Copyright (c) 2007  Andi Kleen (ak@suse.de)
- *	Copyright (c) 2007  Eric Biederman (ebiederm@xmission.com)
- *	Copyright (c) 2007  Vivek Goyal (vgoyal@in.ibm.com)
- *
- * 	This source code is licensed under the GNU General Public License,
- * 	Version 2.  See the file COPYING for more details.
- *
- *	This is a common code for verification whether CPU supports
- * 	long mode and SSE or not. It is not called directly instead this
- *	file is included at various places and compiled in that context.
- * 	Following are the current usage.
- *
- * 	This file is included by both 16bit and 32bit code.
- *
- *	arch/x86_64/boot/setup.S : Boot cpu verification (16bit)
- *	arch/x86_64/boot/compressed/head.S: Boot cpu verification (32bit)
- *	arch/x86_64/kernel/trampoline.S: secondary processor verfication (16bit)
- *	arch/x86_64/kernel/acpi/wakeup.S:Verfication at resume (16bit)
- *
- *	verify_cpu, returns the status of cpu check in register %eax.
- *		0: Success    1: Failure
- *
- * 	The caller needs to check for the error code and take the action
- * 	appropriately. Either display a message or halt.
- */
-
-#include <asm/cpufeature.h>
-
-verify_cpu:
-	pushfl				# Save caller passed flags
-	pushl	$0			# Kill any dangerous flags
-	popfl
-
-	pushfl				# standard way to check for cpuid
-	popl	%eax
-	movl	%eax,%ebx
-	xorl	$0x200000,%eax
-	pushl	%eax
-	popfl
-	pushfl
-	popl	%eax
-	cmpl	%eax,%ebx
-	jz	verify_cpu_no_longmode	# cpu has no cpuid
-
-	movl	$0x0,%eax		# See if cpuid 1 is implemented
-	cpuid
-	cmpl	$0x1,%eax
-	jb	verify_cpu_no_longmode	# no cpuid 1
-
-	xor	%di,%di
-	cmpl	$0x68747541,%ebx	# AuthenticAMD
-	jnz	verify_cpu_noamd
-	cmpl	$0x69746e65,%edx
-	jnz	verify_cpu_noamd
-	cmpl	$0x444d4163,%ecx
-	jnz	verify_cpu_noamd
-	mov	$1,%di			# cpu is from AMD
-
-verify_cpu_noamd:
-	movl    $0x1,%eax		# Does the cpu have what it takes
-	cpuid
-	andl	$REQUIRED_MASK0,%edx
-	xorl	$REQUIRED_MASK0,%edx
-	jnz	verify_cpu_no_longmode
-
-	movl    $0x80000000,%eax	# See if extended cpuid is implemented
-	cpuid
-	cmpl    $0x80000001,%eax
-	jb      verify_cpu_no_longmode	# no extended cpuid
-
-	movl    $0x80000001,%eax	# Does the cpu have what it takes
-	cpuid
-	andl    $REQUIRED_MASK1,%edx
-	xorl    $REQUIRED_MASK1,%edx
-	jnz     verify_cpu_no_longmode
-
-verify_cpu_sse_test:
-	movl	$1,%eax
-	cpuid
-	andl	$SSE_MASK,%edx
-	cmpl	$SSE_MASK,%edx
-	je	verify_cpu_sse_ok
-	test	%di,%di
-	jz	verify_cpu_no_longmode	# only try to force SSE on AMD
-	movl	$0xc0010015,%ecx	# HWCR
-	rdmsr
-	btr	$15,%eax		# enable SSE
-	wrmsr
-	xor	%di,%di			# don't loop
-	jmp	verify_cpu_sse_test	# try again
-
-verify_cpu_no_longmode:
-	popfl				# Restore caller passed flags
-	movl $1,%eax
-	ret
-verify_cpu_sse_ok:
-	popfl				# Restore caller passed flags
-	xorl %eax, %eax
-	ret
diff --git a/arch/x86_64/kernel/vmlinux.lds.S b/arch/x86_64/kernel/vmlinux.lds.S
deleted file mode 100644
index 849ee61..0000000
--- a/arch/x86_64/kernel/vmlinux.lds.S
+++ /dev/null
@@ -1,5 +0,0 @@
-#ifdef CONFIG_X86_32
-# include "vmlinux_32.lds.S"
-#else
-# include "vmlinux_64.lds.S"
-#endif
diff --git a/arch/x86_64/kernel/vmlinux_64.lds.S b/arch/x86_64/kernel/vmlinux_64.lds.S
deleted file mode 100644
index ba8ea97..0000000
--- a/arch/x86_64/kernel/vmlinux_64.lds.S
+++ /dev/null
@@ -1,235 +0,0 @@
-/* ld script to make x86-64 Linux kernel
- * Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>;
- */
-
-#define LOAD_OFFSET __START_KERNEL_map
-
-#include <asm-generic/vmlinux.lds.h>
-#include <asm/page.h>
-
-#undef i386	/* in case the preprocessor is a 32bit one */
-
-OUTPUT_FORMAT("elf64-x86-64", "elf64-x86-64", "elf64-x86-64")
-OUTPUT_ARCH(i386:x86-64)
-ENTRY(phys_startup_64)
-jiffies_64 = jiffies;
-_proxy_pda = 1;
-PHDRS {
-	text PT_LOAD FLAGS(5);	/* R_E */
-	data PT_LOAD FLAGS(7);	/* RWE */
-	user PT_LOAD FLAGS(7);	/* RWE */
-	data.init PT_LOAD FLAGS(7);	/* RWE */
-	note PT_NOTE FLAGS(4);	/* R__ */
-}
-SECTIONS
-{
-  . = __START_KERNEL;
-  phys_startup_64 = startup_64 - LOAD_OFFSET;
-  _text = .;			/* Text and read-only data */
-  .text :  AT(ADDR(.text) - LOAD_OFFSET) {
-	/* First the code that has to be first for bootstrapping */
-	*(.text.head)
-	_stext = .;
-	/* Then the rest */
-	TEXT_TEXT
-	SCHED_TEXT
-	LOCK_TEXT
-	KPROBES_TEXT
-	*(.fixup)
-	*(.gnu.warning)
-	} :text = 0x9090
-  				/* out-of-line lock text */
-  .text.lock : AT(ADDR(.text.lock) - LOAD_OFFSET) { *(.text.lock) }
-
-  _etext = .;			/* End of text section */
-
-  . = ALIGN(16);		/* Exception table */
-  __start___ex_table = .;
-  __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) { *(__ex_table) }
-  __stop___ex_table = .;
-
-  NOTES :text :note
-
-  BUG_TABLE :text
-
-  RODATA
-
-  . = ALIGN(4);
-  .tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) {
-  	__tracedata_start = .;
-	*(.tracedata)
-  	__tracedata_end = .;
-  }
-
-  . = ALIGN(PAGE_SIZE);        /* Align data segment to page size boundary */
-				/* Data */
-  .data : AT(ADDR(.data) - LOAD_OFFSET) {
-	DATA_DATA
-	CONSTRUCTORS
-	} :data
-
-  _edata = .;			/* End of data section */
-
-  . = ALIGN(PAGE_SIZE);
-  . = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
-  .data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) {
-	*(.data.cacheline_aligned)
-  }
-  . = ALIGN(CONFIG_X86_INTERNODE_CACHE_BYTES);
-  .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) {
-  	*(.data.read_mostly)
-  }
-
-#define VSYSCALL_ADDR (-10*1024*1024)
-#define VSYSCALL_PHYS_ADDR ((LOADADDR(.data.read_mostly) + SIZEOF(.data.read_mostly) + 4095) & ~(4095))
-#define VSYSCALL_VIRT_ADDR ((ADDR(.data.read_mostly) + SIZEOF(.data.read_mostly) + 4095) & ~(4095))
-
-#define VLOAD_OFFSET (VSYSCALL_ADDR - VSYSCALL_PHYS_ADDR)
-#define VLOAD(x) (ADDR(x) - VLOAD_OFFSET)
-
-#define VVIRT_OFFSET (VSYSCALL_ADDR - VSYSCALL_VIRT_ADDR)
-#define VVIRT(x) (ADDR(x) - VVIRT_OFFSET)
-
-  . = VSYSCALL_ADDR;
-  .vsyscall_0 :	 AT(VSYSCALL_PHYS_ADDR) { *(.vsyscall_0) } :user
-  __vsyscall_0 = VSYSCALL_VIRT_ADDR;
-
-  . = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
-  .vsyscall_fn : AT(VLOAD(.vsyscall_fn)) { *(.vsyscall_fn) }
-  . = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
-  .vsyscall_gtod_data : AT(VLOAD(.vsyscall_gtod_data))
-		{ *(.vsyscall_gtod_data) }
-  vsyscall_gtod_data = VVIRT(.vsyscall_gtod_data);
-  .vsyscall_clock : AT(VLOAD(.vsyscall_clock))
-		{ *(.vsyscall_clock) }
-  vsyscall_clock = VVIRT(.vsyscall_clock);
-
-
-  .vsyscall_1 ADDR(.vsyscall_0) + 1024: AT(VLOAD(.vsyscall_1))
-		{ *(.vsyscall_1) }
-  .vsyscall_2 ADDR(.vsyscall_0) + 2048: AT(VLOAD(.vsyscall_2))
-		{ *(.vsyscall_2) }
-
-  .vgetcpu_mode : AT(VLOAD(.vgetcpu_mode)) { *(.vgetcpu_mode) }
-  vgetcpu_mode = VVIRT(.vgetcpu_mode);
-
-  . = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
-  .jiffies : AT(VLOAD(.jiffies)) { *(.jiffies) }
-  jiffies = VVIRT(.jiffies);
-
-  .vsyscall_3 ADDR(.vsyscall_0) + 3072: AT(VLOAD(.vsyscall_3))
-		{ *(.vsyscall_3) }
-
-  . = VSYSCALL_VIRT_ADDR + 4096;
-
-#undef VSYSCALL_ADDR
-#undef VSYSCALL_PHYS_ADDR
-#undef VSYSCALL_VIRT_ADDR
-#undef VLOAD_OFFSET
-#undef VLOAD
-#undef VVIRT_OFFSET
-#undef VVIRT
-
-  . = ALIGN(8192);		/* init_task */
-  .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
-	*(.data.init_task)
-  }:data.init
-
-  . = ALIGN(4096);
-  .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) {
-	*(.data.page_aligned)
-  }
-
-  /* might get freed after init */
-  . = ALIGN(4096);
-  __smp_alt_begin = .;
-  __smp_locks = .;
-  .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
-	*(.smp_locks)
-  }
-  __smp_locks_end = .;
-  . = ALIGN(4096);
-  __smp_alt_end = .;
-
-  . = ALIGN(4096);		/* Init code and data */
-  __init_begin = .;
-  .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
-	_sinittext = .;
-	*(.init.text)
-	_einittext = .;
-  }
-  __initdata_begin = .;
-  .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) { *(.init.data) }
-  __initdata_end = .;
-  . = ALIGN(16);
-  __setup_start = .;
-  .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) { *(.init.setup) }
-  __setup_end = .;
-  __initcall_start = .;
-  .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) {
-	INITCALLS
-  }
-  __initcall_end = .;
-  __con_initcall_start = .;
-  .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
-	*(.con_initcall.init)
-  }
-  __con_initcall_end = .;
-  SECURITY_INIT
-  . = ALIGN(8);
-  __alt_instructions = .;
-  .altinstructions : AT(ADDR(.altinstructions) - LOAD_OFFSET) {
-	*(.altinstructions)
-  }
-  __alt_instructions_end = .; 
-  .altinstr_replacement : AT(ADDR(.altinstr_replacement) - LOAD_OFFSET) {
-	*(.altinstr_replacement)
-  }
-  /* .exit.text is discard at runtime, not link time, to deal with references
-     from .altinstructions and .eh_frame */
-  .exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) { *(.exit.text) }
-  .exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) { *(.exit.data) }
-
-/* vdso blob that is mapped into user space */
-  vdso_start = . ;
-  .vdso  : AT(ADDR(.vdso) - LOAD_OFFSET) { *(.vdso) }
-  . = ALIGN(4096);
-  vdso_end = .;
-
-#ifdef CONFIG_BLK_DEV_INITRD
-  . = ALIGN(4096);
-  __initramfs_start = .;
-  .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) { *(.init.ramfs) }
-  __initramfs_end = .;
-#endif
-
-  PERCPU(4096)
-
-  . = ALIGN(4096);
-  __init_end = .;
-
-  . = ALIGN(4096);
-  __nosave_begin = .;
-  .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) { *(.data.nosave) }
-  . = ALIGN(4096);
-  __nosave_end = .;
-
-  __bss_start = .;		/* BSS */
-  .bss : AT(ADDR(.bss) - LOAD_OFFSET) {
-	*(.bss.page_aligned)
-	*(.bss)
-	}
-  __bss_stop = .;
-
-  _end = . ;
-
-  /* Sections to be discarded */
-  /DISCARD/ : {
-	*(.exitcall.exit)
-	*(.eh_frame)
-	}
-
-  STABS_DEBUG
-
-  DWARF_DEBUG
-}
diff --git a/arch/x86_64/kernel/vsmp_64.c b/arch/x86_64/kernel/vsmp_64.c
deleted file mode 100644
index 414caf0..0000000
--- a/arch/x86_64/kernel/vsmp_64.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * vSMPowered(tm) systems specific initialization
- * Copyright (C) 2005 ScaleMP Inc.
- *
- * Use of this code is subject to the terms and conditions of the
- * GNU general public license version 2. See "COPYING" or
- * http://www.gnu.org/licenses/gpl.html
- *
- * Ravikiran Thirumalai <kiran@scalemp.com>,
- * Shai Fultheim <shai@scalemp.com>
- */
-
-#include <linux/init.h>
-#include <linux/pci_ids.h>
-#include <linux/pci_regs.h>
-#include <asm/pci-direct.h>
-#include <asm/io.h>
-
-static int __init vsmp_init(void)
-{
-	void *address;
-	unsigned int cap, ctl;
-
-	if (!early_pci_allowed())
-		return 0;
-
-	/* Check if we are running on a ScaleMP vSMP box */
-	if ((read_pci_config_16(0, 0x1f, 0, PCI_VENDOR_ID) != PCI_VENDOR_ID_SCALEMP) ||
-	    (read_pci_config_16(0, 0x1f, 0, PCI_DEVICE_ID) != PCI_DEVICE_ID_SCALEMP_VSMP_CTL))
-		return 0;
-
-	/* set vSMP magic bits to indicate vSMP capable kernel */
-	address = ioremap(read_pci_config(0, 0x1f, 0, PCI_BASE_ADDRESS_0), 8);
-	cap = readl(address);
-	ctl = readl(address + 4);
-	printk("vSMP CTL: capabilities:0x%08x  control:0x%08x\n", cap, ctl);
-	if (cap & ctl & (1 << 4)) {
-		/* Turn on vSMP IRQ fastpath handling (see system.h) */
-		ctl &= ~(1 << 4);
-		writel(ctl, address + 4);
-		ctl = readl(address + 4);
-		printk("vSMP CTL: control set to:0x%08x\n", ctl);
-	}
-
-	iounmap(address);
-	return 0;
-}
-
-core_initcall(vsmp_init);
diff --git a/arch/x86_64/kernel/vsyscall_64.c b/arch/x86_64/kernel/vsyscall_64.c
deleted file mode 100644
index 06c3494..0000000
--- a/arch/x86_64/kernel/vsyscall_64.c
+++ /dev/null
@@ -1,349 +0,0 @@
-/*
- *  linux/arch/x86_64/kernel/vsyscall.c
- *
- *  Copyright (C) 2001 Andrea Arcangeli <andrea@suse.de> SuSE
- *  Copyright 2003 Andi Kleen, SuSE Labs.
- *
- *  Thanks to hpa@transmeta.com for some useful hint.
- *  Special thanks to Ingo Molnar for his early experience with
- *  a different vsyscall implementation for Linux/IA32 and for the name.
- *
- *  vsyscall 1 is located at -10Mbyte, vsyscall 2 is located
- *  at virtual address -10Mbyte+1024bytes etc... There are at max 4
- *  vsyscalls. One vsyscall can reserve more than 1 slot to avoid
- *  jumping out of line if necessary. We cannot add more with this
- *  mechanism because older kernels won't return -ENOSYS.
- *  If we want more than four we need a vDSO.
- *
- *  Note: the concept clashes with user mode linux. If you use UML and
- *  want per guest time just set the kernel.vsyscall64 sysctl to 0.
- */
-
-#include <linux/time.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/timer.h>
-#include <linux/seqlock.h>
-#include <linux/jiffies.h>
-#include <linux/sysctl.h>
-#include <linux/clocksource.h>
-#include <linux/getcpu.h>
-#include <linux/cpu.h>
-#include <linux/smp.h>
-#include <linux/notifier.h>
-
-#include <asm/vsyscall.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/unistd.h>
-#include <asm/fixmap.h>
-#include <asm/errno.h>
-#include <asm/io.h>
-#include <asm/segment.h>
-#include <asm/desc.h>
-#include <asm/topology.h>
-#include <asm/vgtod.h>
-
-#define __vsyscall(nr) __attribute__ ((unused,__section__(".vsyscall_" #nr)))
-#define __syscall_clobber "r11","rcx","memory"
-#define __pa_vsymbol(x)			\
-	({unsigned long v;  		\
-	extern char __vsyscall_0; 	\
-	  asm("" : "=r" (v) : "0" (x)); \
-	  ((v - VSYSCALL_FIRST_PAGE) + __pa_symbol(&__vsyscall_0)); })
-
-/*
- * vsyscall_gtod_data contains data that is :
- * - readonly from vsyscalls
- * - writen by timer interrupt or systcl (/proc/sys/kernel/vsyscall64)
- * Try to keep this structure as small as possible to avoid cache line ping pongs
- */
-int __vgetcpu_mode __section_vgetcpu_mode;
-
-struct vsyscall_gtod_data __vsyscall_gtod_data __section_vsyscall_gtod_data =
-{
-	.lock = SEQLOCK_UNLOCKED,
-	.sysctl_enabled = 1,
-};
-
-void update_vsyscall(struct timespec *wall_time, struct clocksource *clock)
-{
-	unsigned long flags;
-
-	write_seqlock_irqsave(&vsyscall_gtod_data.lock, flags);
-	/* copy vsyscall data */
-	vsyscall_gtod_data.clock.vread = clock->vread;
-	vsyscall_gtod_data.clock.cycle_last = clock->cycle_last;
-	vsyscall_gtod_data.clock.mask = clock->mask;
-	vsyscall_gtod_data.clock.mult = clock->mult;
-	vsyscall_gtod_data.clock.shift = clock->shift;
-	vsyscall_gtod_data.wall_time_sec = wall_time->tv_sec;
-	vsyscall_gtod_data.wall_time_nsec = wall_time->tv_nsec;
-	vsyscall_gtod_data.sys_tz = sys_tz;
-	vsyscall_gtod_data.wall_time_nsec = wall_time->tv_nsec;
-	vsyscall_gtod_data.wall_to_monotonic = wall_to_monotonic;
-	write_sequnlock_irqrestore(&vsyscall_gtod_data.lock, flags);
-}
-
-/* RED-PEN may want to readd seq locking, but then the variable should be
- * write-once.
- */
-static __always_inline void do_get_tz(struct timezone * tz)
-{
-	*tz = __vsyscall_gtod_data.sys_tz;
-}
-
-static __always_inline int gettimeofday(struct timeval *tv, struct timezone *tz)
-{
-	int ret;
-	asm volatile("vsysc2: syscall"
-		: "=a" (ret)
-		: "0" (__NR_gettimeofday),"D" (tv),"S" (tz)
-		: __syscall_clobber );
-	return ret;
-}
-
-static __always_inline long time_syscall(long *t)
-{
-	long secs;
-	asm volatile("vsysc1: syscall"
-		: "=a" (secs)
-		: "0" (__NR_time),"D" (t) : __syscall_clobber);
-	return secs;
-}
-
-static __always_inline void do_vgettimeofday(struct timeval * tv)
-{
-	cycle_t now, base, mask, cycle_delta;
-	unsigned seq;
-	unsigned long mult, shift, nsec;
-	cycle_t (*vread)(void);
-	do {
-		seq = read_seqbegin(&__vsyscall_gtod_data.lock);
-
-		vread = __vsyscall_gtod_data.clock.vread;
-		if (unlikely(!__vsyscall_gtod_data.sysctl_enabled || !vread)) {
-			gettimeofday(tv,NULL);
-			return;
-		}
-		now = vread();
-		base = __vsyscall_gtod_data.clock.cycle_last;
-		mask = __vsyscall_gtod_data.clock.mask;
-		mult = __vsyscall_gtod_data.clock.mult;
-		shift = __vsyscall_gtod_data.clock.shift;
-
-		tv->tv_sec = __vsyscall_gtod_data.wall_time_sec;
-		nsec = __vsyscall_gtod_data.wall_time_nsec;
-	} while (read_seqretry(&__vsyscall_gtod_data.lock, seq));
-
-	/* calculate interval: */
-	cycle_delta = (now - base) & mask;
-	/* convert to nsecs: */
-	nsec += (cycle_delta * mult) >> shift;
-
-	while (nsec >= NSEC_PER_SEC) {
-		tv->tv_sec += 1;
-		nsec -= NSEC_PER_SEC;
-	}
-	tv->tv_usec = nsec / NSEC_PER_USEC;
-}
-
-int __vsyscall(0) vgettimeofday(struct timeval * tv, struct timezone * tz)
-{
-	if (tv)
-		do_vgettimeofday(tv);
-	if (tz)
-		do_get_tz(tz);
-	return 0;
-}
-
-/* This will break when the xtime seconds get inaccurate, but that is
- * unlikely */
-time_t __vsyscall(1) vtime(time_t *t)
-{
-	struct timeval tv;
-	time_t result;
-	if (unlikely(!__vsyscall_gtod_data.sysctl_enabled))
-		return time_syscall(t);
-
-	vgettimeofday(&tv, 0);
-	result = tv.tv_sec;
-	if (t)
-		*t = result;
-	return result;
-}
-
-/* Fast way to get current CPU and node.
-   This helps to do per node and per CPU caches in user space.
-   The result is not guaranteed without CPU affinity, but usually
-   works out because the scheduler tries to keep a thread on the same
-   CPU.
-
-   tcache must point to a two element sized long array.
-   All arguments can be NULL. */
-long __vsyscall(2)
-vgetcpu(unsigned *cpu, unsigned *node, struct getcpu_cache *tcache)
-{
-	unsigned int dummy, p;
-	unsigned long j = 0;
-
-	/* Fast cache - only recompute value once per jiffies and avoid
-	   relatively costly rdtscp/cpuid otherwise.
-	   This works because the scheduler usually keeps the process
-	   on the same CPU and this syscall doesn't guarantee its
-	   results anyways.
-	   We do this here because otherwise user space would do it on
-	   its own in a likely inferior way (no access to jiffies).
-	   If you don't like it pass NULL. */
-	if (tcache && tcache->blob[0] == (j = __jiffies)) {
-		p = tcache->blob[1];
-	} else if (__vgetcpu_mode == VGETCPU_RDTSCP) {
-		/* Load per CPU data from RDTSCP */
-		rdtscp(dummy, dummy, p);
-	} else {
-		/* Load per CPU data from GDT */
-		asm("lsl %1,%0" : "=r" (p) : "r" (__PER_CPU_SEG));
-	}
-	if (tcache) {
-		tcache->blob[0] = j;
-		tcache->blob[1] = p;
-	}
-	if (cpu)
-		*cpu = p & 0xfff;
-	if (node)
-		*node = p >> 12;
-	return 0;
-}
-
-long __vsyscall(3) venosys_1(void)
-{
-	return -ENOSYS;
-}
-
-#ifdef CONFIG_SYSCTL
-
-#define SYSCALL 0x050f
-#define NOP2    0x9090
-
-/*
- * NOP out syscall in vsyscall page when not needed.
- */
-static int vsyscall_sysctl_change(ctl_table *ctl, int write, struct file * filp,
-                        void __user *buffer, size_t *lenp, loff_t *ppos)
-{
-	extern u16 vsysc1, vsysc2;
-	u16 __iomem *map1;
-	u16 __iomem *map2;
-	int ret = proc_dointvec(ctl, write, filp, buffer, lenp, ppos);
-	if (!write)
-		return ret;
-	/* gcc has some trouble with __va(__pa()), so just do it this
-	   way. */
-	map1 = ioremap(__pa_vsymbol(&vsysc1), 2);
-	if (!map1)
-		return -ENOMEM;
-	map2 = ioremap(__pa_vsymbol(&vsysc2), 2);
-	if (!map2) {
-		ret = -ENOMEM;
-		goto out;
-	}
-	if (!vsyscall_gtod_data.sysctl_enabled) {
-		writew(SYSCALL, map1);
-		writew(SYSCALL, map2);
-	} else {
-		writew(NOP2, map1);
-		writew(NOP2, map2);
-	}
-	iounmap(map2);
-out:
-	iounmap(map1);
-	return ret;
-}
-
-static int vsyscall_sysctl_nostrat(ctl_table *t, int __user *name, int nlen,
-				void __user *oldval, size_t __user *oldlenp,
-				void __user *newval, size_t newlen)
-{
-	return -ENOSYS;
-}
-
-static ctl_table kernel_table2[] = {
-	{ .ctl_name = 99, .procname = "vsyscall64",
-	  .data = &vsyscall_gtod_data.sysctl_enabled, .maxlen = sizeof(int),
-	  .mode = 0644,
-	  .strategy = vsyscall_sysctl_nostrat,
-	  .proc_handler = vsyscall_sysctl_change },
-	{}
-};
-
-static ctl_table kernel_root_table2[] = {
-	{ .ctl_name = CTL_KERN, .procname = "kernel", .mode = 0555,
-	  .child = kernel_table2 },
-	{}
-};
-
-#endif
-
-/* Assume __initcall executes before all user space. Hopefully kmod
-   doesn't violate that. We'll find out if it does. */
-static void __cpuinit vsyscall_set_cpu(int cpu)
-{
-	unsigned long *d;
-	unsigned long node = 0;
-#ifdef CONFIG_NUMA
-	node = cpu_to_node[cpu];
-#endif
-	if (cpu_has(&cpu_data[cpu], X86_FEATURE_RDTSCP))
-		write_rdtscp_aux((node << 12) | cpu);
-
-	/* Store cpu number in limit so that it can be loaded quickly
-	   in user space in vgetcpu.
-	   12 bits for the CPU and 8 bits for the node. */
-	d = (unsigned long *)(cpu_gdt(cpu) + GDT_ENTRY_PER_CPU);
-	*d = 0x0f40000000000ULL;
-	*d |= cpu;
-	*d |= (node & 0xf) << 12;
-	*d |= (node >> 4) << 48;
-}
-
-static void __cpuinit cpu_vsyscall_init(void *arg)
-{
-	/* preemption should be already off */
-	vsyscall_set_cpu(raw_smp_processor_id());
-}
-
-static int __cpuinit
-cpu_vsyscall_notifier(struct notifier_block *n, unsigned long action, void *arg)
-{
-	long cpu = (long)arg;
-	if (action == CPU_ONLINE || action == CPU_ONLINE_FROZEN)
-		smp_call_function_single(cpu, cpu_vsyscall_init, NULL, 0, 1);
-	return NOTIFY_DONE;
-}
-
-static void __init map_vsyscall(void)
-{
-	extern char __vsyscall_0;
-	unsigned long physaddr_page0 = __pa_symbol(&__vsyscall_0);
-
-	/* Note that VSYSCALL_MAPPED_PAGES must agree with the code below. */
-	__set_fixmap(VSYSCALL_FIRST_PAGE, physaddr_page0, PAGE_KERNEL_VSYSCALL);
-}
-
-static int __init vsyscall_init(void)
-{
-	BUG_ON(((unsigned long) &vgettimeofday !=
-			VSYSCALL_ADDR(__NR_vgettimeofday)));
-	BUG_ON((unsigned long) &vtime != VSYSCALL_ADDR(__NR_vtime));
-	BUG_ON((VSYSCALL_ADDR(0) != __fix_to_virt(VSYSCALL_FIRST_PAGE)));
-	BUG_ON((unsigned long) &vgetcpu != VSYSCALL_ADDR(__NR_vgetcpu));
-	map_vsyscall();
-#ifdef CONFIG_SYSCTL
-	register_sysctl_table(kernel_root_table2);
-#endif
-	on_each_cpu(cpu_vsyscall_init, NULL, 0, 1);
-	hotcpu_notifier(cpu_vsyscall_notifier, 0);
-	return 0;
-}
-
-__initcall(vsyscall_init);
diff --git a/arch/x86_64/kernel/x8664_ksyms_64.c b/arch/x86_64/kernel/x8664_ksyms_64.c
deleted file mode 100644
index 77c25b3..0000000
--- a/arch/x86_64/kernel/x8664_ksyms_64.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/* Exports for assembly files.
-   All C exports should go in the respective C files. */
-
-#include <linux/module.h>
-#include <linux/smp.h>
-
-#include <asm/semaphore.h>
-#include <asm/processor.h>
-#include <asm/uaccess.h>
-#include <asm/pgtable.h>
-
-EXPORT_SYMBOL(kernel_thread);
-
-EXPORT_SYMBOL(__down_failed);
-EXPORT_SYMBOL(__down_failed_interruptible);
-EXPORT_SYMBOL(__down_failed_trylock);
-EXPORT_SYMBOL(__up_wakeup);
-
-EXPORT_SYMBOL(__get_user_1);
-EXPORT_SYMBOL(__get_user_2);
-EXPORT_SYMBOL(__get_user_4);
-EXPORT_SYMBOL(__get_user_8);
-EXPORT_SYMBOL(__put_user_1);
-EXPORT_SYMBOL(__put_user_2);
-EXPORT_SYMBOL(__put_user_4);
-EXPORT_SYMBOL(__put_user_8);
-
-EXPORT_SYMBOL(copy_user_generic);
-EXPORT_SYMBOL(__copy_user_nocache);
-EXPORT_SYMBOL(copy_from_user);
-EXPORT_SYMBOL(copy_to_user);
-EXPORT_SYMBOL(__copy_from_user_inatomic);
-
-EXPORT_SYMBOL(copy_page);
-EXPORT_SYMBOL(clear_page);
-
-#ifdef CONFIG_SMP
-extern void  __write_lock_failed(rwlock_t *rw);
-extern void  __read_lock_failed(rwlock_t *rw);
-EXPORT_SYMBOL(__write_lock_failed);
-EXPORT_SYMBOL(__read_lock_failed);
-#endif
-
-/* Export string functions. We normally rely on gcc builtin for most of these,
-   but gcc sometimes decides not to inline them. */    
-#undef memcpy
-#undef memset
-#undef memmove
-
-extern void * memset(void *,int,__kernel_size_t);
-extern void * memcpy(void *,const void *,__kernel_size_t);
-extern void * __memcpy(void *,const void *,__kernel_size_t);
-
-EXPORT_SYMBOL(memset);
-EXPORT_SYMBOL(memcpy);
-EXPORT_SYMBOL(__memcpy);
-
-EXPORT_SYMBOL(empty_zero_page);
-EXPORT_SYMBOL(init_level4_pgt);
-EXPORT_SYMBOL(load_gs_index);
-
-EXPORT_SYMBOL(_proxy_pda);