Merge branch 'x86-nuke-platforms-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 old platform removal from Peter Anvin:
 "This patchset removes support for several completely obsolete
  platforms, where the maintainers either have completely vanished or
  acked the removal.  For some of them it is questionable if there even
  exists functional specimens of the hardware"

Geert Uytterhoeven apparently thought this was a April Fool's pull request ;)

* 'x86-nuke-platforms-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, platforms: Remove NUMAQ
  x86, platforms: Remove SGI Visual Workstation
  x86, apic: Remove support for IBM Summit/EXA chipset
  x86, apic: Remove support for ia32-based Unisys ES7000

3 files changed, 0 insertions, 610 deletions

diff --git a/arch/x86/platform/Makefile b/arch/x86/platform/Makefile
index 20342d4..85afde1 100644
--- a/arch/x86/platform/Makefile
+++ b/arch/x86/platform/Makefile
@@ -9,5 +9,4 @@ obj-y	+= olpc/
 obj-y	+= scx200/
 obj-y	+= sfi/
 obj-y	+= ts5500/
-obj-y	+= visws/
 obj-y	+= uv/
diff --git a/arch/x86/platform/visws/Makefile b/arch/x86/platform/visws/Makefile
deleted file mode 100644
index 91bc17a..0000000
--- a/arch/x86/platform/visws/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-$(CONFIG_X86_VISWS)	+= visws_quirks.o
diff --git a/arch/x86/platform/visws/visws_quirks.c b/arch/x86/platform/visws/visws_quirks.c
deleted file mode 100644
index 94d8a39..0000000
--- a/arch/x86/platform/visws/visws_quirks.c
+++ /dev/null
@@ -1,608 +0,0 @@
-/*
- *  SGI Visual Workstation support and quirks, unmaintained.
- *
- *  Split out from setup.c by davej@suse.de
- *
- *	Copyright (C) 1999 Bent Hagemark, Ingo Molnar
- *
- *  SGI Visual Workstation interrupt controller
- *
- *  The Cobalt system ASIC in the Visual Workstation contains a "Cobalt" APIC
- *  which serves as the main interrupt controller in the system.  Non-legacy
- *  hardware in the system uses this controller directly.  Legacy devices
- *  are connected to the PIIX4 which in turn has its 8259(s) connected to
- *  a of the Cobalt APIC entry.
- *
- *  09/02/2000 - Updated for 2.4 by jbarnes@sgi.com
- *
- *  25/11/2002 - Updated for 2.5 by Andrey Panin <pazke@orbita1.ru>
- */
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-
-#include <asm/visws/cobalt.h>
-#include <asm/visws/piix4.h>
-#include <asm/io_apic.h>
-#include <asm/fixmap.h>
-#include <asm/reboot.h>
-#include <asm/setup.h>
-#include <asm/apic.h>
-#include <asm/e820.h>
-#include <asm/time.h>
-#include <asm/io.h>
-
-#include <linux/kernel_stat.h>
-
-#include <asm/i8259.h>
-#include <asm/irq_vectors.h>
-#include <asm/visws/lithium.h>
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/pci_ids.h>
-
-extern int no_broadcast;
-
-char visws_board_type	= -1;
-char visws_board_rev	= -1;
-
-static void __init visws_time_init(void)
-{
-	printk(KERN_INFO "Starting Cobalt Timer system clock\n");
-
-	/* Set the countdown value */
-	co_cpu_write(CO_CPU_TIMEVAL, CO_TIME_HZ/HZ);
-
-	/* Start the timer */
-	co_cpu_write(CO_CPU_CTRL, co_cpu_read(CO_CPU_CTRL) | CO_CTRL_TIMERUN);
-
-	/* Enable (unmask) the timer interrupt */
-	co_cpu_write(CO_CPU_CTRL, co_cpu_read(CO_CPU_CTRL) & ~CO_CTRL_TIMEMASK);
-
-	setup_default_timer_irq();
-}
-
-/* Replaces the default init_ISA_irqs in the generic setup */
-static void __init visws_pre_intr_init(void);
-
-/* Quirk for machine specific memory setup. */
-
-#define MB (1024 * 1024)
-
-unsigned long sgivwfb_mem_phys;
-unsigned long sgivwfb_mem_size;
-EXPORT_SYMBOL(sgivwfb_mem_phys);
-EXPORT_SYMBOL(sgivwfb_mem_size);
-
-long long mem_size __initdata = 0;
-
-static char * __init visws_memory_setup(void)
-{
-	long long gfx_mem_size = 8 * MB;
-
-	mem_size = boot_params.alt_mem_k;
-
-	if (!mem_size) {
-		printk(KERN_WARNING "Bootloader didn't set memory size, upgrade it !\n");
-		mem_size = 128 * MB;
-	}
-
-	/*
-	 * this hardcodes the graphics memory to 8 MB
-	 * it really should be sized dynamically (or at least
-	 * set as a boot param)
-	 */
-	if (!sgivwfb_mem_size) {
-		printk(KERN_WARNING "Defaulting to 8 MB framebuffer size\n");
-		sgivwfb_mem_size = 8 * MB;
-	}
-
-	/*
-	 * Trim to nearest MB
-	 */
-	sgivwfb_mem_size &= ~((1 << 20) - 1);
-	sgivwfb_mem_phys = mem_size - gfx_mem_size;
-
-	e820_add_region(0, LOWMEMSIZE(), E820_RAM);
-	e820_add_region(HIGH_MEMORY, mem_size - sgivwfb_mem_size - HIGH_MEMORY, E820_RAM);
-	e820_add_region(sgivwfb_mem_phys, sgivwfb_mem_size, E820_RESERVED);
-
-	return "PROM";
-}
-
-static void visws_machine_emergency_restart(void)
-{
-	/*
-	 * Visual Workstations restart after this
-	 * register is poked on the PIIX4
-	 */
-	outb(PIIX4_RESET_VAL, PIIX4_RESET_PORT);
-}
-
-static void visws_machine_power_off(void)
-{
-	unsigned short pm_status;
-/*	extern unsigned int pci_bus0; */
-
-	while ((pm_status = inw(PMSTS_PORT)) & 0x100)
-		outw(pm_status, PMSTS_PORT);
-
-	outw(PM_SUSPEND_ENABLE, PMCNTRL_PORT);
-
-	mdelay(10);
-
-#define PCI_CONF1_ADDRESS(bus, devfn, reg) \
-	(0x80000000 | (bus << 16) | (devfn << 8) | (reg & ~3))
-
-/*	outl(PCI_CONF1_ADDRESS(pci_bus0, SPECIAL_DEV, SPECIAL_REG), 0xCF8); */
-	outl(PIIX_SPECIAL_STOP, 0xCFC);
-}
-
-static void __init visws_get_smp_config(unsigned int early)
-{
-}
-
-/*
- * The Visual Workstation is Intel MP compliant in the hardware
- * sense, but it doesn't have a BIOS(-configuration table).
- * No problem for Linux.
- */
-
-static void __init MP_processor_info(struct mpc_cpu *m)
-{
-	int ver, logical_apicid;
-	physid_mask_t apic_cpus;
-
-	if (!(m->cpuflag & CPU_ENABLED))
-		return;
-
-	logical_apicid = m->apicid;
-	printk(KERN_INFO "%sCPU #%d %u:%u APIC version %d\n",
-	       m->cpuflag & CPU_BOOTPROCESSOR ? "Bootup " : "",
-	       m->apicid, (m->cpufeature & CPU_FAMILY_MASK) >> 8,
-	       (m->cpufeature & CPU_MODEL_MASK) >> 4, m->apicver);
-
-	if (m->cpuflag & CPU_BOOTPROCESSOR)
-		boot_cpu_physical_apicid = m->apicid;
-
-	ver = m->apicver;
-	if ((ver >= 0x14 && m->apicid >= 0xff) || m->apicid >= 0xf) {
-		printk(KERN_ERR "Processor #%d INVALID. (Max ID: %d).\n",
-			m->apicid, MAX_LOCAL_APIC);
-		return;
-	}
-
-	apic->apicid_to_cpu_present(m->apicid, &apic_cpus);
-	physids_or(phys_cpu_present_map, phys_cpu_present_map, apic_cpus);
-	/*
-	 * Validate version
-	 */
-	if (ver == 0x0) {
-		printk(KERN_ERR "BIOS bug, APIC version is 0 for CPU#%d! "
-			"fixing up to 0x10. (tell your hw vendor)\n",
-			m->apicid);
-		ver = 0x10;
-	}
-	apic_version[m->apicid] = ver;
-}
-
-static void __init visws_find_smp_config(void)
-{
-	struct mpc_cpu *mp = phys_to_virt(CO_CPU_TAB_PHYS);
-	unsigned short ncpus = readw(phys_to_virt(CO_CPU_NUM_PHYS));
-
-	if (ncpus > CO_CPU_MAX) {
-		printk(KERN_WARNING "find_visws_smp: got cpu count of %d at %p\n",
-			ncpus, mp);
-
-		ncpus = CO_CPU_MAX;
-	}
-
-	if (ncpus > setup_max_cpus)
-		ncpus = setup_max_cpus;
-
-#ifdef CONFIG_X86_LOCAL_APIC
-	smp_found_config = 1;
-#endif
-	while (ncpus--)
-		MP_processor_info(mp++);
-
-	mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
-}
-
-static void visws_trap_init(void);
-
-void __init visws_early_detect(void)
-{
-	int raw;
-
-	visws_board_type = (char)(inb_p(PIIX_GPI_BD_REG) & PIIX_GPI_BD_REG)
-							 >> PIIX_GPI_BD_SHIFT;
-
-	if (visws_board_type < 0)
-		return;
-
-	/*
-	 * Override the default platform setup functions
-	 */
-	x86_init.resources.memory_setup = visws_memory_setup;
-	x86_init.mpparse.get_smp_config = visws_get_smp_config;
-	x86_init.mpparse.find_smp_config = visws_find_smp_config;
-	x86_init.irqs.pre_vector_init = visws_pre_intr_init;
-	x86_init.irqs.trap_init = visws_trap_init;
-	x86_init.timers.timer_init = visws_time_init;
-	x86_init.pci.init = pci_visws_init;
-	x86_init.pci.init_irq = x86_init_noop;
-
-	/*
-	 * Install reboot quirks:
-	 */
-	pm_power_off			= visws_machine_power_off;
-	machine_ops.emergency_restart	= visws_machine_emergency_restart;
-
-	/*
-	 * Do not use broadcast IPIs:
-	 */
-	no_broadcast = 0;
-
-#ifdef CONFIG_X86_IO_APIC
-	/*
-	 * Turn off IO-APIC detection and initialization:
-	 */
-	skip_ioapic_setup		= 1;
-#endif
-
-	/*
-	 * Get Board rev.
-	 * First, we have to initialize the 307 part to allow us access
-	 * to the GPIO registers.  Let's map them at 0x0fc0 which is right
-	 * after the PIIX4 PM section.
-	 */
-	outb_p(SIO_DEV_SEL, SIO_INDEX);
-	outb_p(SIO_GP_DEV, SIO_DATA);	/* Talk to GPIO regs. */
-
-	outb_p(SIO_DEV_MSB, SIO_INDEX);
-	outb_p(SIO_GP_MSB, SIO_DATA);	/* MSB of GPIO base address */
-
-	outb_p(SIO_DEV_LSB, SIO_INDEX);
-	outb_p(SIO_GP_LSB, SIO_DATA);	/* LSB of GPIO base address */
-
-	outb_p(SIO_DEV_ENB, SIO_INDEX);
-	outb_p(1, SIO_DATA);		/* Enable GPIO registers. */
-
-	/*
-	 * Now, we have to map the power management section to write
-	 * a bit which enables access to the GPIO registers.
-	 * What lunatic came up with this shit?
-	 */
-	outb_p(SIO_DEV_SEL, SIO_INDEX);
-	outb_p(SIO_PM_DEV, SIO_DATA);	/* Talk to GPIO regs. */
-
-	outb_p(SIO_DEV_MSB, SIO_INDEX);
-	outb_p(SIO_PM_MSB, SIO_DATA);	/* MSB of PM base address */
-
-	outb_p(SIO_DEV_LSB, SIO_INDEX);
-	outb_p(SIO_PM_LSB, SIO_DATA);	/* LSB of PM base address */
-
-	outb_p(SIO_DEV_ENB, SIO_INDEX);
-	outb_p(1, SIO_DATA);		/* Enable PM registers. */
-
-	/*
-	 * Now, write the PM register which enables the GPIO registers.
-	 */
-	outb_p(SIO_PM_FER2, SIO_PM_INDEX);
-	outb_p(SIO_PM_GP_EN, SIO_PM_DATA);
-
-	/*
-	 * Now, initialize the GPIO registers.
-	 * We want them all to be inputs which is the
-	 * power on default, so let's leave them alone.
-	 * So, let's just read the board rev!
-	 */
-	raw = inb_p(SIO_GP_DATA1);
-	raw &= 0x7f;	/* 7 bits of valid board revision ID. */
-
-	if (visws_board_type == VISWS_320) {
-		if (raw < 0x6) {
-			visws_board_rev = 4;
-		} else if (raw < 0xc) {
-			visws_board_rev = 5;
-		} else {
-			visws_board_rev = 6;
-		}
-	} else if (visws_board_type == VISWS_540) {
-			visws_board_rev = 2;
-		} else {
-			visws_board_rev = raw;
-		}
-
-	printk(KERN_INFO "Silicon Graphics Visual Workstation %s (rev %d) detected\n",
-	       (visws_board_type == VISWS_320 ? "320" :
-	       (visws_board_type == VISWS_540 ? "540" :
-		"unknown")), visws_board_rev);
-}
-
-#define A01234 (LI_INTA_0 | LI_INTA_1 | LI_INTA_2 | LI_INTA_3 | LI_INTA_4)
-#define BCD (LI_INTB | LI_INTC | LI_INTD)
-#define ALLDEVS (A01234 | BCD)
-
-static __init void lithium_init(void)
-{
-	set_fixmap(FIX_LI_PCIA, LI_PCI_A_PHYS);
-	set_fixmap(FIX_LI_PCIB, LI_PCI_B_PHYS);
-
-	if ((li_pcia_read16(PCI_VENDOR_ID) != PCI_VENDOR_ID_SGI) ||
-	    (li_pcia_read16(PCI_DEVICE_ID) != PCI_DEVICE_ID_SGI_LITHIUM)) {
-		printk(KERN_EMERG "Lithium hostbridge %c not found\n", 'A');
-/*		panic("This machine is not SGI Visual Workstation 320/540"); */
-	}
-
-	if ((li_pcib_read16(PCI_VENDOR_ID) != PCI_VENDOR_ID_SGI) ||
-	    (li_pcib_read16(PCI_DEVICE_ID) != PCI_DEVICE_ID_SGI_LITHIUM)) {
-		printk(KERN_EMERG "Lithium hostbridge %c not found\n", 'B');
-/*		panic("This machine is not SGI Visual Workstation 320/540"); */
-	}
-
-	li_pcia_write16(LI_PCI_INTEN, ALLDEVS);
-	li_pcib_write16(LI_PCI_INTEN, ALLDEVS);
-}
-
-static __init void cobalt_init(void)
-{
-	/*
-	 * On normal SMP PC this is used only with SMP, but we have to
-	 * use it and set it up here to start the Cobalt clock
-	 */
-	set_fixmap(FIX_APIC_BASE, APIC_DEFAULT_PHYS_BASE);
-	setup_local_APIC();
-	printk(KERN_INFO "Local APIC Version %#x, ID %#x\n",
-		(unsigned int)apic_read(APIC_LVR),
-		(unsigned int)apic_read(APIC_ID));
-
-	set_fixmap(FIX_CO_CPU, CO_CPU_PHYS);
-	set_fixmap(FIX_CO_APIC, CO_APIC_PHYS);
-	printk(KERN_INFO "Cobalt Revision %#lx, APIC ID %#lx\n",
-		co_cpu_read(CO_CPU_REV), co_apic_read(CO_APIC_ID));
-
-	/* Enable Cobalt APIC being careful to NOT change the ID! */
-	co_apic_write(CO_APIC_ID, co_apic_read(CO_APIC_ID) | CO_APIC_ENABLE);
-
-	printk(KERN_INFO "Cobalt APIC enabled: ID reg %#lx\n",
-		co_apic_read(CO_APIC_ID));
-}
-
-static void __init visws_trap_init(void)
-{
-	lithium_init();
-	cobalt_init();
-}
-
-/*
- * IRQ controller / APIC support:
- */
-
-static DEFINE_SPINLOCK(cobalt_lock);
-
-/*
- * Set the given Cobalt APIC Redirection Table entry to point
- * to the given IDT vector/index.
- */
-static inline void co_apic_set(int entry, int irq)
-{
-	co_apic_write(CO_APIC_LO(entry), CO_APIC_LEVEL | (irq + FIRST_EXTERNAL_VECTOR));
-	co_apic_write(CO_APIC_HI(entry), 0);
-}
-
-/*
- * Cobalt (IO)-APIC functions to handle PCI devices.
- */
-static inline int co_apic_ide0_hack(void)
-{
-	extern char visws_board_type;
-	extern char visws_board_rev;
-
-	if (visws_board_type == VISWS_320 && visws_board_rev == 5)
-		return 5;
-	return CO_APIC_IDE0;
-}
-
-static int is_co_apic(unsigned int irq)
-{
-	if (IS_CO_APIC(irq))
-		return CO_APIC(irq);
-
-	switch (irq) {
-		case 0: return CO_APIC_CPU;
-		case CO_IRQ_IDE0: return co_apic_ide0_hack();
-		case CO_IRQ_IDE1: return CO_APIC_IDE1;
-		default: return -1;
-	}
-}
-
-
-/*
- * This is the SGI Cobalt (IO-)APIC:
- */
-static void enable_cobalt_irq(struct irq_data *data)
-{
-	co_apic_set(is_co_apic(data->irq), data->irq);
-}
-
-static void disable_cobalt_irq(struct irq_data *data)
-{
-	int entry = is_co_apic(data->irq);
-
-	co_apic_write(CO_APIC_LO(entry), CO_APIC_MASK);
-	co_apic_read(CO_APIC_LO(entry));
-}
-
-static void ack_cobalt_irq(struct irq_data *data)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&cobalt_lock, flags);
-	disable_cobalt_irq(data);
-	apic_write(APIC_EOI, APIC_EOI_ACK);
-	spin_unlock_irqrestore(&cobalt_lock, flags);
-}
-
-static struct irq_chip cobalt_irq_type = {
-	.name		= "Cobalt-APIC",
-	.irq_enable	= enable_cobalt_irq,
-	.irq_disable	= disable_cobalt_irq,
-	.irq_ack	= ack_cobalt_irq,
-};
-
-
-/*
- * This is the PIIX4-based 8259 that is wired up indirectly to Cobalt
- * -- not the manner expected by the code in i8259.c.
- *
- * there is a 'master' physical interrupt source that gets sent to
- * the CPU. But in the chipset there are various 'virtual' interrupts
- * waiting to be handled. We represent this to Linux through a 'master'
- * interrupt controller type, and through a special virtual interrupt-
- * controller. Device drivers only see the virtual interrupt sources.
- */
-static unsigned int startup_piix4_master_irq(struct irq_data *data)
-{
-	legacy_pic->init(0);
-	enable_cobalt_irq(data);
-	return 0;
-}
-
-static struct irq_chip piix4_master_irq_type = {
-	.name		= "PIIX4-master",
-	.irq_startup	= startup_piix4_master_irq,
-	.irq_ack	= ack_cobalt_irq,
-};
-
-static void pii4_mask(struct irq_data *data) { }
-
-static struct irq_chip piix4_virtual_irq_type = {
-	.name		= "PIIX4-virtual",
-	.irq_mask	= pii4_mask,
-};
-
-/*
- * PIIX4-8259 master/virtual functions to handle interrupt requests
- * from legacy devices: floppy, parallel, serial, rtc.
- *
- * None of these get Cobalt APIC entries, neither do they have IDT
- * entries. These interrupts are purely virtual and distributed from
- * the 'master' interrupt source: CO_IRQ_8259.
- *
- * When the 8259 interrupts its handler figures out which of these
- * devices is interrupting and dispatches to its handler.
- *
- * CAREFUL: devices see the 'virtual' interrupt only. Thus disable/
- * enable_irq gets the right irq. This 'master' irq is never directly
- * manipulated by any driver.
- */
-static irqreturn_t piix4_master_intr(int irq, void *dev_id)
-{
-	unsigned long flags;
-	int realirq;
-
-	raw_spin_lock_irqsave(&i8259A_lock, flags);
-
-	/* Find out what's interrupting in the PIIX4 master 8259 */
-	outb(0x0c, 0x20);		/* OCW3 Poll command */
-	realirq = inb(0x20);
-
-	/*
-	 * Bit 7 == 0 means invalid/spurious
-	 */
-	if (unlikely(!(realirq & 0x80)))
-		goto out_unlock;
-
-	realirq &= 7;
-
-	if (unlikely(realirq == 2)) {
-		outb(0x0c, 0xa0);
-		realirq = inb(0xa0);
-
-		if (unlikely(!(realirq & 0x80)))
-			goto out_unlock;
-
-		realirq = (realirq & 7) + 8;
-	}
-
-	/* mask and ack interrupt */
-	cached_irq_mask |= 1 << realirq;
-	if (unlikely(realirq > 7)) {
-		inb(0xa1);
-		outb(cached_slave_mask, 0xa1);
-		outb(0x60 + (realirq & 7), 0xa0);
-		outb(0x60 + 2, 0x20);
-	} else {
-		inb(0x21);
-		outb(cached_master_mask, 0x21);
-		outb(0x60 + realirq, 0x20);
-	}
-
-	raw_spin_unlock_irqrestore(&i8259A_lock, flags);
-
-	/*
-	 * handle this 'virtual interrupt' as a Cobalt one now.
-	 */
-	generic_handle_irq(realirq);
-
-	return IRQ_HANDLED;
-
-out_unlock:
-	raw_spin_unlock_irqrestore(&i8259A_lock, flags);
-	return IRQ_NONE;
-}
-
-static struct irqaction master_action = {
-	.handler =	piix4_master_intr,
-	.name =		"PIIX4-8259",
-	.flags =	IRQF_NO_THREAD,
-};
-
-static struct irqaction cascade_action = {
-	.handler = 	no_action,
-	.name =		"cascade",
-	.flags =	IRQF_NO_THREAD,
-};
-
-static inline void set_piix4_virtual_irq_type(void)
-{
-	piix4_virtual_irq_type.irq_enable = i8259A_chip.irq_unmask;
-	piix4_virtual_irq_type.irq_disable = i8259A_chip.irq_mask;
-	piix4_virtual_irq_type.irq_unmask = i8259A_chip.irq_unmask;
-}
-
-static void __init visws_pre_intr_init(void)
-{
-	int i;
-
-	set_piix4_virtual_irq_type();
-
-	for (i = 0; i < CO_IRQ_APIC0 + CO_APIC_LAST + 1; i++) {
-		struct irq_chip *chip = NULL;
-
-		if (i == 0)
-			chip = &cobalt_irq_type;
-		else if (i == CO_IRQ_IDE0)
-			chip = &cobalt_irq_type;
-		else if (i == CO_IRQ_IDE1)
-			chip = &cobalt_irq_type;
-		else if (i == CO_IRQ_8259)
-			chip = &piix4_master_irq_type;
-		else if (i < CO_IRQ_APIC0)
-			chip = &piix4_virtual_irq_type;
-		else if (IS_CO_APIC(i))
-			chip = &cobalt_irq_type;
-
-		if (chip)
-			irq_set_chip(i, chip);
-	}
-
-	setup_irq(CO_IRQ_8259, &master_action);
-	setup_irq(2, &cascade_action);
-}